di mdxx 000 dina4
TRANSCRIPT
-
8/12/2019 Di Mdxx 000 Dina4
1/2
2D Debus & Diebold Mesysteme GmbH, Alte Karlsruher Str. 8, D-76227 KarlsruheTel.: +49(0)721 94485-0 Fax.: +49(0)721 94485-29
The specifications on this document are subject to change at 2D decision. 2D assumes noresponsibility for any claims or damages arising out of the use of this document, or from the use ofmodules based on this document, including but not limited to claims or damages based oninfringement of patents, copyrights or other intellectual property rights.
2D Debus & Diebold Mesysteme GmbHhttp://www.2D-datarecording.comhttp://[email protected]
28.06.2013 / LK Display Units
DI-MD12-000 MiniDash display
Technical specifications
Electrical characteristics Mechanical characteristics
Power supply..................................... 9-15 V Dimensions............................. 70 x 40 x 16.5 mm
Current consumption@12V................ 150 mA Weight..................................... 80 g
Housing material..................... aluminium
Cable length............................ 190 mm
MiniDash type differences DI-MD12-000
ChannelsCAN channels................... 32
Event channels................. 2
Switchable pages............................... 6
Channels per page............................. up-to 8
CAN Monitor......................................
Nine LEDs free programmable.........
Auto-Zero-Function............................
Ordering information
Art.No.:.................................... DI-MD12-000
Features
Shows any CAN channel on a 18 x 58 mm LCDgraphic display (122 x 32 Pixel) divided on up-to 6pages
Conversion formula for each channel freelyprogrammable
Programmable alert function
9 individual programmable LEDs
Formatted advertisement of the fastest laptime
CAN monitor function
Programmable contrast, brightness, backlight
-
8/12/2019 Di Mdxx 000 Dina4
2/2
2D Debus & Diebold Mesysteme GmbH, Alte Karlsruher Str. 8, D-76227 KarlsruheTel.: +49(0)721 94485-0 Fax.: +49(0)721 94485-29
The specifications on this document are subject to change at 2D decision. 2D assumes noresponsibility for any claims or damages arising out of the use of this document, or from the use ofmodules based on this document, including but not limited to claims or damages based oninfringement of patents, copyrights or other intellectual property rights.
2D Debus & Diebold Mesysteme GmbHhttp://www.2D-datarecording.comhttp://[email protected]
28.06.2013 / LK Display Units
DI-MD12-000 MiniDash display
Dimensions
Connector layout Connector types
CAN-line (MiniDash)
AWG / Color Open wires (optional)
Connector at display Mating plug
Cable
type........................... Raychem SEPD-7wire cross section...... AWG26-DR25length........................ 190mm
Binder712,8pin
Pin Name Description Color (standard)
1 Button/LAP Button 1 blue
2 BGND Board Ground black
3 - Not connected -
4 Vext Power IN (4-18V) red
5 CAN H CAN Bus High white
6 CAN L CAN Bus Low green
7 TxD Serial Bus Transmit yellow
8 RxD Serial Bus Receive brown
MiniDashDisplay
Binder 712, 8 PM(front side)
213
4567
81
23 67548
Binder 712, 8 PF
(front side)
Documentation referenceA documentation about operating + setting for this display is available at
www.2d-datarecording.com.