description modules meeting the 40g testing challenge
TRANSCRIPT
Multiservice ModulesDescription Modules
FTB-8120NGE FTB-8130NGE
Electrical interfaces: DS1, E1/2M, E2/8M, E3/34M, DS3/45M, E4/140M, STM-1e/STM-0e/52M, STS-3e/STM-1e/155M
Optical OC-3/12/48, STM-1/4/16, OTU1 (2.7G) 100M/interfaces: Gigabit Ethernet, 1G/2G/4G FC
OC-192/STM-64, OTU2, OTU1e, OTU2e, 10G Ethernet, 10G FC
10/100/1000BaseT Ethernet add/drop and test port
Optical Gigabit Ethernet add/drop port
Next-generation SONET/SDH (GFP, VCAT, LCAS) (on FTB-500)
OTN (ITU-T G.709) standard compliance
Over-clocked OTN compliance
Ethernet-over-OTN
ODU1 into ODU2 multiplexing
OTN OH manipulation/analysis (on FTB-500)
SONET/SDH and OTN Intrusive Through mode (on FTB-500)
OTN SDT
10/100M and Gigabit Ethernet BERT, RFC 2544 and frame analysis
10 Gigabit Ethernet BERT, RFC 2544 and frame analysis
Smart loopback
Dual test set (bidirectional RFC)
1/2/4G FC BERT, latency and buffer-to-buffer credit testing
10G FC BERT, latency and buffer-to-buffer credit testing
DWDM Commissioning ModulesDescription Modules
FTB-5240S FTB-5240S-P
Power, wavelength and OSNR measurement
All transmission bands, CWDM and DWDM capability
50 GHz transmission DWDM commissioning
EDFA qualification and balancing
Long-term DWDM monitoring
In-band OSNR capability
Physical-Layer ModulesDescription Modules
FTB-5500B FTB-5600 FTB-5700 FTB-5800
End-to-end chromatic dispersion (CD) qualification up to 100G
End-to-end PMD qualification up to 100G
Single-ended CD qualification (ideal for metro mesh networks)
Single-ended PMD qualification (ideal for metro mesh networks)
CD and PMD qualification of long-haul, ultra-long-haul and submarine networks
PMD mitigation for link upgrades (distributed PMD measurement)
40G/43G SONET/SDH Testing ModuleDescription Module
FTB-8140
OC-768/STM-256 testing with AU4 granularity
OTN testing including FEC as per ITU-T G.709
Compatible with multiple optical transmission protocols, including NRZ, ODB, DPSK and DQPSK
SONET/SDH and OTN Intrusive Through mode
SONET/SDH and OTN overhead manipulation/analysis
OTN SDT
40G
Tes
t M
odule
s: S
imple
Fac
ts
Meeting the 40G Testing Challenge
“ Are you geared up for the shift from 10G to 40G/100G? ”
www.opternus.de • [email protected]. 5 • D-22941 Bargteheide
Tel.: +49 (0)4532-2044-0 • Fax: +49 (0)4532-2044-25Büro Süd:
Wäldenbronner Str. 2 • D-73732 EsslingenTel.: +49 (0)711-3105999-0 • Fax: +49 (0)711-3105999-99
Überreicht durch:
40G Network Realities Internet traffic is growing exponentially, due in large part to the increasing demand for triple-play and other high-bandwidth services. In addition, some heavily loaded networks already have hot spots where links are approaching full capacity—not to mention the extra IP and Ethernet traffic that service providers must accommodate.
Implementing higher bit rates therefore seems inevitable, especially with the cost reductions made possible by packet-based optical transport network (P-OTN) deployments; P-OTNs contain fewer network elements, require less space and power, and minimize the failures to troubleshoot.
However, the fundemental question is: can your network sustain the upgrade to 40G?
EXFO’s 40G testing solution can help you find the answer.
EXFO’s 40G Testing Solution: Unique Advantages
Shape it as you see fitTake advantage of the FTB-500 Platform’s modular architecture by complementing the FTB-8140 (40G/43G) module with either:
a CD or PMD analyzer for physical-layer testing
a standard or in-band OSA for network commissioning
a multiservice test module (FTB-8130NGE) for service turn-up up to 10G
Protect your investmentA true field-upgradeable solution thanks to software options including OTU3, Intrusive Through mode, Ethernet and Fibre Channel—without any hardware upgrade.
40G mappings with AU-4 granularity even within OPU3 payloadCovering all possible 40G ROADM commissioning configurations and lower-rate SONET/SDH services within 40G pipes.
Experience efficiency with fast and simultaneous testing40G and CD/PMD/OSNR, or SONET/SDH/Ethernet/FC up to 10G, for quick network commissioning and service turn-up.
40G-compatible solution with different line-coding schemesIncludes NRZ, ODB, DPSK and DQPSK line codes, addressing a wide range of ROADM implementations.
In-service testing of ROADM-based networksUses SONET/SDH/OTN Through mode and Intrusive Through mode to monitor live traffic when needed for troubleshooting purposes.
Primarily designed for field testingProvides over one hour of battery operation at 40G line rate, touchscreen operation, remote management, reporting capabilities and scripting macrorecorder.
FTB-5240S-P (spectral solution for 40G and ROADM in-band OSNR)
FTB-8140 (40G/43G testing)
FTB-8140 (40G/43G testing)
FTB-500 Platform
40/43G Network Commissioning Testing
Integrated 40G/43G and in-band OSNR testing in a field-portable unit
One-minute, one-step in-band OSNR measurement for efficient 40G and ROADM performance assessment
Automated per-channel setup and analysis with one-button operation
Real-time spectral analysis for efficient network commissioning (<1 second scan)
90 dB dynamic range per scan for high sensitivity even through 5/95 taps
40G/43G mappings with STS-1/AU-4 granularity
Compatibility with multiple line codes; NRZ, duobinary, DPSK and DQPSK
OTU3 with FEC testing as software option (day one)
Easy to set up and save in “Favorites”; custom configurations can be recalled in the field
Battery operation, remote management, reporting via mobile communication and scripting macrorecorder
FTB-7500E Metro/Long-Haul OTDR
FIP-400 Fiber Inspection Probe
FTB-3930 MultiTest Module(OLTS)
FTB-5800 Chromatic Dispersion Analyzer
FTB-5500 PMD Analyzer
Total Fiber Characterization
40/43G Turn-Up Testing Integrated transport and datacom testing
T1/E1-to-40G/43G portable testing
40G mappings with STS-1/AU-4 granularity
Compatible with multiple optical transmission protocols: NRZ, duobinary, DPSK and DQPSK
OTU1/2/3 with FEC testing as software option (day one)
OTU1e/OTU2e with FEC testing and mapped 10G Ethernet LAN over OTN
10M-to-10G (LAN/WAN) Ethernet testing
1x/2x/4x/10x Fibre Channel testing
Optional next-generation SONET/SDH testing
Battery operation, touchscreen, remote management, reporting via mobile communication and scripting macrorecorder
Fast and accurate CD and PMD testing through amplifiers
PMD testing using the general interferometric approach—the only recommended method for unmatched precision in all network environments
Highly optimized OTDRs delivering lightning-fast trace acquisitions and enabling multiwavelength test routines in 45 seconds
Bidirectional link-loss and ORL measurement in less than 7 seconds
FTB-8130NGE (service testing up to 10G)
When needed, in-service testing can be performed using the SONET/SDH and OTN Intrusive Through mode.