descripción de señales mid 128.pdf
TRANSCRIPT
7/23/2019 Descripción de señales MID 128.pdf
http://slidepdf.com/reader/full/descripcion-de-senales-mid-128pdf 1/5
EECU and Breakout Box Connected in Series Between EECU and Wiring
Harness
For the measurements below, the following applies:
l Breakout box J -41132 connected between connector EA or EB and the EECU.
l J umper harness J 43233 connected between connector EA or EB and the EECU.
l The EECU connected.
l Ignition key in ON position.
l Engine not running.
l Measuring voltage.
EECU voltage check, EA
EECU voltage check, EB
B+ = battery voltage
Connection Signal type Measuring
points
Ignition key in the ON
position
Other
9/7/2005 12:21:24 PMsman14911_series12
1(5)US570025
7/23/2019 Descripción de señales MID 128.pdf
http://slidepdf.com/reader/full/descripcion-de-senales-mid-128pdf 2/5
7/23/2019 Descripción de señales MID 128.pdf
http://slidepdf.com/reader/full/descripcion-de-senales-mid-128pdf 3/5
7/23/2019 Descripción de señales MID 128.pdf
http://slidepdf.com/reader/full/descripcion-de-senales-mid-128pdf 4/5
7/23/2019 Descripción de señales MID 128.pdf
http://slidepdf.com/reader/full/descripcion-de-senales-mid-128pdf 5/5
0 V (EPG on) with the ignition
key in the ON
position.
EB36 EPG 2 EB36 / EB9 B+ (EPG off)
0 V (EPG on)
Normally OFF
with the ignition
key in the ON
position.
9/7/2005 12:21:24 PMsman14911_series12
5(5)US570025