department - pmc-atpmc-at.com/pdfs/thermodynamics072514.pdf · thermodynamics che 06-221 department...
TRANSCRIPT
![Page 1: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/1.jpg)
06-221 Thermodynamics 9 units
Fall 2012 Tues-Thurs 12:00 – 1:20; Hamerschlag Hall B131
(100% Lecture, 0% Recitation, 0% Laboratory)
Instructor: Raj Chakrabarti Department: Chemical Engineering
Telephone: 8-5615
Office Hours: W 1:30 – 3:30
Office: DH 3122
E-mail: [email protected]
Web-site: http://www.cmu.edu/blackboard
Required Text(s): S.I. Sandler, Chemical, Biochemical and Engineering Thermodynamics
4th Edition, John Wiley & Sons ISBN-13: 978-0-471-66174-0
Specific Course Information: This course introduces students to the process thermodynamics
of single component systems. Topics include equilibrium and thermodynamic state variables;
heat and work; conservation of energy and the first law of thermodynamics; entropy balances
and the second law of thermodynamics; reversibility; free energies; interconversion of heat and
work via engines, refrigeration and power cycles; absolute temperature and the third law of
thermodynamics; equations of state; principle of corresponding states; thermodynamic property
relationships; changes of state; phase equilibrium and stability in single component systems;
vapor pressure and phase transition.
Prerequisites: 06-100, 33-106 Required: Yes
Topics: (Chapters 1 – 7 of Sandler)
• Equilibrium and thermodynamic state variables
• Application of the first law of thermodynamics to processes where energy is converted among
heat and work
• Application of the second law of thermodynamics to processes involving entropy balance and
reversibility, heat engines, refrigeration cycles and power generation
• Thermodynamic properties of real substances, partial derivatives, equations of state
• Changes of thermodynamic state and principle of corresponding states
• Phase equilibrium and stability in one-component systems: molar Gibbs free energy and fugacity,
vapor pressure calculations, Gibbs phase rule, phase transitions
Teaching Assistants
Chris Knapp
Office hours: F 9:30 - 11:30
DH 2208
Matt Payne
Office hours: T,W 9:00 -
10:00 DH1202
![Page 2: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/2.jpg)
Grading: 2 midterm exams @25% each; 1 quiz
@ 10%; cumulative final exam @30%;
homework @10% (~ weekly)
Prerequisites: satisfactory completion of 06-100;
mastery of unit conversions, material balances,
differentiation and integration
Follow-up Courses: 06-261 Fluid Mechanics;
06-321Chemical Engineering Thermodynamics,
06-323 Heat and Mass Transfer; 06-361 Unit
Operations of Chemical Engineering
Course Overview:
Thermodynamics is one of the key engineering sciences. It teaches us how energy can be converted from
one form to another or transferred from one object to another, for example when the internal energy stored in
chemical bonds in a fuel may be converted to heat and transferred to another material during combustion. It also
tells us how the expansion of the material that receives this heat may be used to capture mechanically useful work.
Chemical engineers excel at designing processes. A process is any procedure or set of procedures that
changes a material in some way. Thermodynamics teaches us how the properties of materials change when we
change their conditions and how these changes dictate the amount of work that must be done or the amount of heat
that must be transferred to accomplish that change. Thermodynamics is the basis for evaluating the energy
requirements of any chemical engineering process. Some of these topics will be covered in 06-221, others in 06-321.
In essence, thermodynamics can be viewed as the “science of what is physically possible.” How much
work can be accomplished by a particular process? What is the maximum possible yield of some chemical reaction?
Thermodynamics teaches us about equilibrium. This is the state toward which a system spontaneously evolves.
Once reached, this is the resting state of the system – until an external force is applied. Thermodynamics does not
inform us of the rate at which these processes occur. For example, thermodynamics indicates how much heat should
be transferred to achieve equilibrium between two materials that initially have different temperatures, but to find out
how quickly the temperatures change, we have to use the science of transport phenomena. You will learn this
separate branch of engineering science later in the courses Fluid Mechanics and Heat and Mass Transfer. Both
thermodynamics and transport phenomena are used to design processes.
By teaching us what is or is not possible, thermodynamics lies at the core of engineering design. No
process can violate any of the laws of thermodynamics; a process design that claims to do so is invalid. There is no
point in trying to design a process that aims to accomplish more than what is thermodynamically possible. It will
not succeed. Thermodynamics will dictate whether a particular process is
![Page 3: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/3.jpg)
Thermodynamics
CHE 06-221
Department of Chemical Engineering, Carnegie Mellon University
December 5, 2012
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 1 / 196
![Page 4: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/4.jpg)
Outline
1 What is Thermodynamics?
2 Some Thermodynamics Terminology
3 Basic concepts of thermodynamics
4 Thermodynamic equations of state
5 Conservation of Mass
6 Integral formulation of mass balance
7 Multicomponent mass balance
8 Conservation of energyEnergy balance
9 Towards the 2nd Law of Thermodynamics
10 Toward engineering applications: thermodynamic cycles and heat engines
11 Thermodynamic properties of real substances (not ideal gases)Computation of heat and work for thermodynamic processes involving nonideal substancesComputation of entropy changes for thermodynamic processes involving nonideal substances
12 Outline of remaining topics and schedule
13 Further analysis of the behavior of real gases
14 Phase equilibrium
15 More on Gibbs free energy and applications to phase equilibrium
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 2 / 196
![Page 5: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/5.jpg)
Outline
1 What is Thermodynamics?
2 Some Thermodynamics Terminology
3 Basic concepts of thermodynamics
4 Thermodynamic equations of state
5 Conservation of Mass
6 Integral formulation of mass balance
7 Multicomponent mass balance
8 Conservation of energyEnergy balance
9 Towards the 2nd Law of Thermodynamics
10 Toward engineering applications: thermodynamic cycles and heat engines
11 Thermodynamic properties of real substances (not ideal gases)Computation of heat and work for thermodynamic processes involving nonideal substancesComputation of entropy changes for thermodynamic processes involving nonideal substances
12 Outline of remaining topics and schedule
13 Further analysis of the behavior of real gases
14 Phase equilibrium
15 More on Gibbs free energy and applications to phase equilibrium
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 3 / 196
![Page 6: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/6.jpg)
What is Thermodynamics?
Definition
Thermodynamics is a branch of science concerned with changes associated with the internalenergy of systems consisting of a very large number of microscopic parts.
Internal energy: energy associated with molecular motions, interactions and bonding in asystem. A form of thermal energy, hence the name
Although thermodynamics deals with internal energy, it is a macroscopic science and doesnot consider the microscopic origins of internal energy.
Rather, for systems containing a large number of molecules, it introduces macroscopicvariables that are related to the average states of the molecules, as well as laws governingchanges in those macroscopic variables.
Once the appropriate macroscopic variables have been introduced, one can relate changes ininternal energy of a system to changes in its macroscopic variables, and also to themacroscopic variables describing the surroundings that are in contact with our system.
Mechanical interaction between our system and its surroundings can then also be considered.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 4 / 196
![Page 7: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/7.jpg)
What is Thermodynamics?
Definition
Thermodynamics is a branch of science concerned with changes associated with the internalenergy of systems consisting of a very large number of microscopic parts.
Internal energy: energy associated with molecular motions, interactions and bonding in asystem. A form of thermal energy, hence the name
Although thermodynamics deals with internal energy, it is a macroscopic science and doesnot consider the microscopic origins of internal energy.
Rather, for systems containing a large number of molecules, it introduces macroscopicvariables that are related to the average states of the molecules, as well as laws governingchanges in those macroscopic variables.
Once the appropriate macroscopic variables have been introduced, one can relate changes ininternal energy of a system to changes in its macroscopic variables, and also to themacroscopic variables describing the surroundings that are in contact with our system.
Mechanical interaction between our system and its surroundings can then also be considered.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 4 / 196
![Page 8: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/8.jpg)
What is Thermodynamics?
Definition
Thermodynamics is a branch of science concerned with changes associated with the internalenergy of systems consisting of a very large number of microscopic parts.
Internal energy: energy associated with molecular motions, interactions and bonding in asystem. A form of thermal energy, hence the name
Although thermodynamics deals with internal energy, it is a macroscopic science and doesnot consider the microscopic origins of internal energy.
Rather, for systems containing a large number of molecules, it introduces macroscopicvariables that are related to the average states of the molecules, as well as laws governingchanges in those macroscopic variables.
Once the appropriate macroscopic variables have been introduced, one can relate changes ininternal energy of a system to changes in its macroscopic variables, and also to themacroscopic variables describing the surroundings that are in contact with our system.
Mechanical interaction between our system and its surroundings can then also be considered.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 4 / 196
![Page 9: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/9.jpg)
What is Thermodynamics?
Definition
Thermodynamics is a branch of science concerned with changes associated with the internalenergy of systems consisting of a very large number of microscopic parts.
Internal energy: energy associated with molecular motions, interactions and bonding in asystem. A form of thermal energy, hence the name
Although thermodynamics deals with internal energy, it is a macroscopic science and doesnot consider the microscopic origins of internal energy.
Rather, for systems containing a large number of molecules, it introduces macroscopicvariables that are related to the average states of the molecules, as well as laws governingchanges in those macroscopic variables.
Once the appropriate macroscopic variables have been introduced, one can relate changes ininternal energy of a system to changes in its macroscopic variables, and also to themacroscopic variables describing the surroundings that are in contact with our system.
Mechanical interaction between our system and its surroundings can then also be considered.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 4 / 196
![Page 10: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/10.jpg)
What is Thermodynamics?
Definition
Thermodynamics is a branch of science concerned with changes associated with the internalenergy of systems consisting of a very large number of microscopic parts.
Internal energy: energy associated with molecular motions, interactions and bonding in asystem. A form of thermal energy, hence the name
Although thermodynamics deals with internal energy, it is a macroscopic science and doesnot consider the microscopic origins of internal energy.
Rather, for systems containing a large number of molecules, it introduces macroscopicvariables that are related to the average states of the molecules, as well as laws governingchanges in those macroscopic variables.
Once the appropriate macroscopic variables have been introduced, one can relate changes ininternal energy of a system to changes in its macroscopic variables, and also to themacroscopic variables describing the surroundings that are in contact with our system.
Mechanical interaction between our system and its surroundings can then also be considered.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 4 / 196
![Page 11: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/11.jpg)
Examples of thermodynamic variables
Example of macroscopic variable: pressure. For a sufficiently large number of molecules, ifwe compare several identically prepared systems, the measured pressure will be almostidentical for all systems.
Pressure is considered in mechanics for systems consisting of just a few bodies; inthermodynamics it is considered for systems consisting of many molecules.An important macroscopic variable that is introduced in thermodynamics: temperature.Temperature has no analog for systems consisting of a small number of molecules.Laws of thermodynamics apply to all such macroscopic systems (under certain generalassumptions)Other equations used in thermodynamics - for example those relating the values oftemperature and pressure, are system-specific. Thermodynamics does not derive the latterequations, which depend on the molecular details, but rather establishes them based onexperiment.
(a) (b)
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 5 / 196
![Page 12: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/12.jpg)
Examples of thermodynamic variables
Example of macroscopic variable: pressure. For a sufficiently large number of molecules, ifwe compare several identically prepared systems, the measured pressure will be almostidentical for all systems.Pressure is considered in mechanics for systems consisting of just a few bodies; inthermodynamics it is considered for systems consisting of many molecules.
An important macroscopic variable that is introduced in thermodynamics: temperature.Temperature has no analog for systems consisting of a small number of molecules.Laws of thermodynamics apply to all such macroscopic systems (under certain generalassumptions)Other equations used in thermodynamics - for example those relating the values oftemperature and pressure, are system-specific. Thermodynamics does not derive the latterequations, which depend on the molecular details, but rather establishes them based onexperiment.
(c) (d)
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 5 / 196
![Page 13: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/13.jpg)
Examples of thermodynamic variables
Example of macroscopic variable: pressure. For a sufficiently large number of molecules, ifwe compare several identically prepared systems, the measured pressure will be almostidentical for all systems.Pressure is considered in mechanics for systems consisting of just a few bodies; inthermodynamics it is considered for systems consisting of many molecules.An important macroscopic variable that is introduced in thermodynamics: temperature.Temperature has no analog for systems consisting of a small number of molecules.
Laws of thermodynamics apply to all such macroscopic systems (under certain generalassumptions)Other equations used in thermodynamics - for example those relating the values oftemperature and pressure, are system-specific. Thermodynamics does not derive the latterequations, which depend on the molecular details, but rather establishes them based onexperiment.
(e) (f)
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 5 / 196
![Page 14: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/14.jpg)
Examples of thermodynamic variables
Example of macroscopic variable: pressure. For a sufficiently large number of molecules, ifwe compare several identically prepared systems, the measured pressure will be almostidentical for all systems.Pressure is considered in mechanics for systems consisting of just a few bodies; inthermodynamics it is considered for systems consisting of many molecules.An important macroscopic variable that is introduced in thermodynamics: temperature.Temperature has no analog for systems consisting of a small number of molecules.Laws of thermodynamics apply to all such macroscopic systems (under certain generalassumptions)
Other equations used in thermodynamics - for example those relating the values oftemperature and pressure, are system-specific. Thermodynamics does not derive the latterequations, which depend on the molecular details, but rather establishes them based onexperiment.
(g) (h)
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 5 / 196
![Page 15: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/15.jpg)
Examples of thermodynamic variables
Example of macroscopic variable: pressure. For a sufficiently large number of molecules, ifwe compare several identically prepared systems, the measured pressure will be almostidentical for all systems.Pressure is considered in mechanics for systems consisting of just a few bodies; inthermodynamics it is considered for systems consisting of many molecules.An important macroscopic variable that is introduced in thermodynamics: temperature.Temperature has no analog for systems consisting of a small number of molecules.Laws of thermodynamics apply to all such macroscopic systems (under certain generalassumptions)Other equations used in thermodynamics - for example those relating the values oftemperature and pressure, are system-specific. Thermodynamics does not derive the latterequations, which depend on the molecular details, but rather establishes them based onexperiment.
(i) (j)
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 5 / 196
![Page 16: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/16.jpg)
Outline
1 What is Thermodynamics?
2 Some Thermodynamics Terminology
3 Basic concepts of thermodynamics
4 Thermodynamic equations of state
5 Conservation of Mass
6 Integral formulation of mass balance
7 Multicomponent mass balance
8 Conservation of energyEnergy balance
9 Towards the 2nd Law of Thermodynamics
10 Toward engineering applications: thermodynamic cycles and heat engines
11 Thermodynamic properties of real substances (not ideal gases)Computation of heat and work for thermodynamic processes involving nonideal substancesComputation of entropy changes for thermodynamic processes involving nonideal substances
12 Outline of remaining topics and schedule
13 Further analysis of the behavior of real gases
14 Phase equilibrium
15 More on Gibbs free energy and applications to phase equilibrium
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 6 / 196
![Page 17: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/17.jpg)
Definitions
System: a region under study (e.g., in specified volume); surroundings: rest of universe (orspecified part that does not interact with the remainder). Systems can be composed ofsmaller, but still macroscopic subsystems
Thermal contact - change in temperature of surroundings can change that of system
Mechanical contact - change in pressure of surroundings can change that of system
Phase - ”state of agglomeration” of system - whether system is a gas, liquid or solid
![Page 18: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/18.jpg)
Definitions
System: a region under study (e.g., in specified volume); surroundings: rest of universe (orspecified part that does not interact with the remainder). Systems can be composed ofsmaller, but still macroscopic subsystems
Thermal contact - change in temperature of surroundings can change that of system
Mechanical contact - change in pressure of surroundings can change that of system
Phase - ”state of agglomeration” of system - whether system is a gas, liquid or solid
![Page 19: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/19.jpg)
Definitions
System: a region under study (e.g., in specified volume); surroundings: rest of universe (orspecified part that does not interact with the remainder). Systems can be composed ofsmaller, but still macroscopic subsystems
Thermal contact - change in temperature of surroundings can change that of system
Mechanical contact - change in pressure of surroundings can change that of system
Phase - ”state of agglomeration” of system - whether system is a gas, liquid or solid
![Page 20: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/20.jpg)
Definitions
System: a region under study (e.g., in specified volume); surroundings: rest of universe (orspecified part that does not interact with the remainder). Systems can be composed ofsmaller, but still macroscopic subsystems
Thermal contact - change in temperature of surroundings can change that of system
Mechanical contact - change in pressure of surroundings can change that of system
Phase - ”state of agglomeration” of system - whether system is a gas, liquid or solid
![Page 21: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/21.jpg)
System classifications based on types of interaction with surroundings
Isolated system: one that does not change with change in surroundings (does not interactthrough thermal or mechanical contact)
Adiabatic system: one that is not in thermal contact (same as thermally isolated system)
Open system: mass can flow in/out of the system; Closed system: no mass exchange
Constraints on system: surroundings can be designed/engineered so they fix the values ofcertain macroscopic variables (examples: constant volume container, thermostatic heat bath)
What classifications apply to the system below?
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 8 / 196
![Page 22: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/22.jpg)
System classifications based on types of interaction with surroundings
Isolated system: one that does not change with change in surroundings (does not interactthrough thermal or mechanical contact)
Adiabatic system: one that is not in thermal contact (same as thermally isolated system)
Open system: mass can flow in/out of the system; Closed system: no mass exchange
Constraints on system: surroundings can be designed/engineered so they fix the values ofcertain macroscopic variables (examples: constant volume container, thermostatic heat bath)
What classifications apply to the system below?
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 8 / 196
![Page 23: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/23.jpg)
System classifications based on types of interaction with surroundings
Isolated system: one that does not change with change in surroundings (does not interactthrough thermal or mechanical contact)
Adiabatic system: one that is not in thermal contact (same as thermally isolated system)
Open system: mass can flow in/out of the system; Closed system: no mass exchange
Constraints on system: surroundings can be designed/engineered so they fix the values ofcertain macroscopic variables (examples: constant volume container, thermostatic heat bath)
What classifications apply to the system below?
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 8 / 196
![Page 24: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/24.jpg)
System classifications based on types of interaction with surroundings
Isolated system: one that does not change with change in surroundings (does not interactthrough thermal or mechanical contact)
Adiabatic system: one that is not in thermal contact (same as thermally isolated system)
Open system: mass can flow in/out of the system; Closed system: no mass exchange
Constraints on system: surroundings can be designed/engineered so they fix the values ofcertain macroscopic variables (examples: constant volume container, thermostatic heat bath)
What classifications apply to the system below?
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 8 / 196
![Page 25: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/25.jpg)
System classifications based on types of interaction with surroundings
Isolated system: one that does not change with change in surroundings (does not interactthrough thermal or mechanical contact)
Adiabatic system: one that is not in thermal contact (same as thermally isolated system)
Open system: mass can flow in/out of the system; Closed system: no mass exchange
Constraints on system: surroundings can be designed/engineered so they fix the values ofcertain macroscopic variables (examples: constant volume container, thermostatic heat bath)
What classifications apply to the system below?
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 8 / 196
![Page 26: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/26.jpg)
Outline
1 What is Thermodynamics?
2 Some Thermodynamics Terminology
3 Basic concepts of thermodynamics
4 Thermodynamic equations of state
5 Conservation of Mass
6 Integral formulation of mass balance
7 Multicomponent mass balance
8 Conservation of energyEnergy balance
9 Towards the 2nd Law of Thermodynamics
10 Toward engineering applications: thermodynamic cycles and heat engines
11 Thermodynamic properties of real substances (not ideal gases)Computation of heat and work for thermodynamic processes involving nonideal substancesComputation of entropy changes for thermodynamic processes involving nonideal substances
12 Outline of remaining topics and schedule
13 Further analysis of the behavior of real gases
14 Phase equilibrium
15 More on Gibbs free energy and applications to phase equilibrium
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 9 / 196
![Page 27: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/27.jpg)
Thermodynamic Equilibrium
The predictions of thermodynamics apply to equilibrium states of macroscopic systems thatare observed after the constraints imposed on a system by its surroundings have been fixedfor a sufficiently long period of time
During this time, subsystems that compose the system interact mechanically and thermally,and the macroscopic variables describing them change (equilibrate)Properties of equilibrium states:
1 Does not vary w time2 System is uniform (no internal temperature, pressure, concentration gradients)3 Heat/mass/work flows zero (contrast w steady state where these can be nonzero)4 Net rate of chemical reactions is zero; chemical reactions may still proceed as long as rates balance
Thermodynamic equilibrium requires both mechanical equilibrium (no changes to system dueto mechanical contact) and thermal equilibrium (no changes to system due to thermalcontact)
![Page 28: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/28.jpg)
Thermodynamic Equilibrium
The predictions of thermodynamics apply to equilibrium states of macroscopic systems thatare observed after the constraints imposed on a system by its surroundings have been fixedfor a sufficiently long period of time
During this time, subsystems that compose the system interact mechanically and thermally,and the macroscopic variables describing them change (equilibrate)
Properties of equilibrium states:1 Does not vary w time2 System is uniform (no internal temperature, pressure, concentration gradients)3 Heat/mass/work flows zero (contrast w steady state where these can be nonzero)4 Net rate of chemical reactions is zero; chemical reactions may still proceed as long as rates balance
Thermodynamic equilibrium requires both mechanical equilibrium (no changes to system dueto mechanical contact) and thermal equilibrium (no changes to system due to thermalcontact)
![Page 29: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/29.jpg)
Thermodynamic Equilibrium
The predictions of thermodynamics apply to equilibrium states of macroscopic systems thatare observed after the constraints imposed on a system by its surroundings have been fixedfor a sufficiently long period of time
During this time, subsystems that compose the system interact mechanically and thermally,and the macroscopic variables describing them change (equilibrate)Properties of equilibrium states:
1 Does not vary w time2 System is uniform (no internal temperature, pressure, concentration gradients)3 Heat/mass/work flows zero (contrast w steady state where these can be nonzero)4 Net rate of chemical reactions is zero; chemical reactions may still proceed as long as rates balance
Thermodynamic equilibrium requires both mechanical equilibrium (no changes to system dueto mechanical contact) and thermal equilibrium (no changes to system due to thermalcontact)
![Page 30: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/30.jpg)
Thermodynamic Equilibrium
The predictions of thermodynamics apply to equilibrium states of macroscopic systems thatare observed after the constraints imposed on a system by its surroundings have been fixedfor a sufficiently long period of time
During this time, subsystems that compose the system interact mechanically and thermally,and the macroscopic variables describing them change (equilibrate)Properties of equilibrium states:
1 Does not vary w time2 System is uniform (no internal temperature, pressure, concentration gradients)3 Heat/mass/work flows zero (contrast w steady state where these can be nonzero)4 Net rate of chemical reactions is zero; chemical reactions may still proceed as long as rates balance
Thermodynamic equilibrium requires both mechanical equilibrium (no changes to system dueto mechanical contact) and thermal equilibrium (no changes to system due to thermalcontact)
![Page 31: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/31.jpg)
Pressure
Definition of Pressure: F/A where F denotes the total force exerted by a system on itscontainer and A denotes the surface area of the container
Any two systems in mechanical equilibrium have the same value of pressure
Absolute pressure scale: P ≥ 0 - no negative pressures allowed (this is implied by definitionof pressure in terms of force exerted on container, which cannot be negative at equilibrium)
![Page 32: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/32.jpg)
Pressure
Definition of Pressure: F/A where F denotes the total force exerted by a system on itscontainer and A denotes the surface area of the container
Any two systems in mechanical equilibrium have the same value of pressure
Absolute pressure scale: P ≥ 0 - no negative pressures allowed (this is implied by definitionof pressure in terms of force exerted on container, which cannot be negative at equilibrium)
![Page 33: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/33.jpg)
Pressure
Definition of Pressure: F/A where F denotes the total force exerted by a system on itscontainer and A denotes the surface area of the container
Any two systems in mechanical equilibrium have the same value of pressure
Absolute pressure scale: P ≥ 0 - no negative pressures allowed (this is implied by definitionof pressure in terms of force exerted on container, which cannot be negative at equilibrium)
![Page 34: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/34.jpg)
Temperature
Temperature: a system property that has the same value for any two systems in thermalequilibrium (no flow of heat). Any temperature scale must satisfy this condition
Absolute Kelvin temperature scale: T ≥ 0
Can define temperature scale in terms of mechanical units if we refer to experiments with aparticular system; it was empirically found that low density gases obey “ideal gas law”PV = NRT ; measure product of P,V for N = 1 mol , and specify corresponding value ofT ≥ 0; then R = PV
NTfollows
One mole of an ideal gas with PV = 8.314J is said to have temperature T = 1 K ; then Rhas units J/mol K . Having made this choice, T for a given amount of ideal gas follows fromthe value of PV
T (K) = T (C) + 273.15
![Page 35: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/35.jpg)
Temperature
Temperature: a system property that has the same value for any two systems in thermalequilibrium (no flow of heat). Any temperature scale must satisfy this condition
Absolute Kelvin temperature scale: T ≥ 0
Can define temperature scale in terms of mechanical units if we refer to experiments with aparticular system; it was empirically found that low density gases obey “ideal gas law”PV = NRT ; measure product of P,V for N = 1 mol , and specify corresponding value ofT ≥ 0; then R = PV
NTfollows
One mole of an ideal gas with PV = 8.314J is said to have temperature T = 1 K ; then Rhas units J/mol K . Having made this choice, T for a given amount of ideal gas follows fromthe value of PV
T (K) = T (C) + 273.15
![Page 36: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/36.jpg)
Temperature
Temperature: a system property that has the same value for any two systems in thermalequilibrium (no flow of heat). Any temperature scale must satisfy this condition
Absolute Kelvin temperature scale: T ≥ 0
Can define temperature scale in terms of mechanical units if we refer to experiments with aparticular system; it was empirically found that low density gases obey “ideal gas law”PV = NRT ; measure product of P,V for N = 1 mol , and specify corresponding value ofT ≥ 0; then R = PV
NTfollows
One mole of an ideal gas with PV = 8.314J is said to have temperature T = 1 K ; then Rhas units J/mol K . Having made this choice, T for a given amount of ideal gas follows fromthe value of PV
T (K) = T (C) + 273.15
![Page 37: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/37.jpg)
Temperature
Temperature: a system property that has the same value for any two systems in thermalequilibrium (no flow of heat). Any temperature scale must satisfy this condition
Absolute Kelvin temperature scale: T ≥ 0
Can define temperature scale in terms of mechanical units if we refer to experiments with aparticular system; it was empirically found that low density gases obey “ideal gas law”PV = NRT ; measure product of P,V for N = 1 mol , and specify corresponding value ofT ≥ 0; then R = PV
NTfollows
One mole of an ideal gas with PV = 8.314J is said to have temperature T = 1 K ; then Rhas units J/mol K . Having made this choice, T for a given amount of ideal gas follows fromthe value of PV
T (K) = T (C) + 273.15
![Page 38: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/38.jpg)
Temperature
Temperature: a system property that has the same value for any two systems in thermalequilibrium (no flow of heat). Any temperature scale must satisfy this condition
Absolute Kelvin temperature scale: T ≥ 0
Can define temperature scale in terms of mechanical units if we refer to experiments with aparticular system; it was empirically found that low density gases obey “ideal gas law”PV = NRT ; measure product of P,V for N = 1 mol , and specify corresponding value ofT ≥ 0; then R = PV
NTfollows
One mole of an ideal gas with PV = 8.314J is said to have temperature T = 1 K ; then Rhas units J/mol K . Having made this choice, T for a given amount of ideal gas follows fromthe value of PV
T (K) = T (C) + 273.15
![Page 39: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/39.jpg)
Heat vs work
How do interacting subsystems achieve equilibrium? By exchanging energy in the form ofwork and heat. This can change their internal energies.
work (W): energy transfer by mechanical motion of (or across) system boundaries
There is a transfer of energy that occurs between system at higher T and that at lower Twhen two systems are in thermal contact. This is called a flow of heat (Q).
Temperature is defined such that energy transfer in the form of heat occurs from the systemat higher T to the system at lower T
We will provide expressions suitable for the calculation of heat and work in later lectures
![Page 40: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/40.jpg)
Heat vs work
How do interacting subsystems achieve equilibrium? By exchanging energy in the form ofwork and heat. This can change their internal energies.
work (W): energy transfer by mechanical motion of (or across) system boundaries
There is a transfer of energy that occurs between system at higher T and that at lower Twhen two systems are in thermal contact. This is called a flow of heat (Q).
Temperature is defined such that energy transfer in the form of heat occurs from the systemat higher T to the system at lower T
We will provide expressions suitable for the calculation of heat and work in later lectures
![Page 41: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/41.jpg)
Heat vs work
How do interacting subsystems achieve equilibrium? By exchanging energy in the form ofwork and heat. This can change their internal energies.
work (W): energy transfer by mechanical motion of (or across) system boundaries
There is a transfer of energy that occurs between system at higher T and that at lower Twhen two systems are in thermal contact. This is called a flow of heat (Q).
Temperature is defined such that energy transfer in the form of heat occurs from the systemat higher T to the system at lower T
We will provide expressions suitable for the calculation of heat and work in later lectures
![Page 42: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/42.jpg)
Heat vs work
How do interacting subsystems achieve equilibrium? By exchanging energy in the form ofwork and heat. This can change their internal energies.
work (W): energy transfer by mechanical motion of (or across) system boundaries
There is a transfer of energy that occurs between system at higher T and that at lower Twhen two systems are in thermal contact. This is called a flow of heat (Q).
Temperature is defined such that energy transfer in the form of heat occurs from the systemat higher T to the system at lower T
We will provide expressions suitable for the calculation of heat and work in later lectures
![Page 43: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/43.jpg)
Heat vs work
How do interacting subsystems achieve equilibrium? By exchanging energy in the form ofwork and heat. This can change their internal energies.
work (W): energy transfer by mechanical motion of (or across) system boundaries
There is a transfer of energy that occurs between system at higher T and that at lower Twhen two systems are in thermal contact. This is called a flow of heat (Q).
Temperature is defined such that energy transfer in the form of heat occurs from the systemat higher T to the system at lower T
We will provide expressions suitable for the calculation of heat and work in later lectures
![Page 44: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/44.jpg)
Heat, work examples
![Page 45: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/45.jpg)
Thermal vs mechanical energy
Mechanical energy: mechanical, electrical work (denoted by W )
Thermal energy: total internal energy (denoted by U), heat (denoted by Q)
Same internal energy change can occur through heat, mechanical or electrical work -different forms of energy change. ∆U = Q + W
Conservation of energy (first law of thermodynamics): total energy cannot be created ordestroyed, only changed in form.
(k) (l) (m)
![Page 46: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/46.jpg)
Thermal vs mechanical energy
Mechanical energy: mechanical, electrical work (denoted by W )
Thermal energy: total internal energy (denoted by U), heat (denoted by Q)
Same internal energy change can occur through heat, mechanical or electrical work -different forms of energy change. ∆U = Q + W
Conservation of energy (first law of thermodynamics): total energy cannot be created ordestroyed, only changed in form.
(n) (o) (p)
![Page 47: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/47.jpg)
Thermal vs mechanical energy
Mechanical energy: mechanical, electrical work (denoted by W )
Thermal energy: total internal energy (denoted by U), heat (denoted by Q)
Same internal energy change can occur through heat, mechanical or electrical work -different forms of energy change. ∆U = Q + W
Conservation of energy (first law of thermodynamics): total energy cannot be created ordestroyed, only changed in form.
(q) (r) (s)
![Page 48: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/48.jpg)
Thermal vs mechanical energy
Mechanical energy: mechanical, electrical work (denoted by W )
Thermal energy: total internal energy (denoted by U), heat (denoted by Q)
Same internal energy change can occur through heat, mechanical or electrical work -different forms of energy change. ∆U = Q + W
Conservation of energy (first law of thermodynamics): total energy cannot be created ordestroyed, only changed in form.
(t) (u) (v)
![Page 49: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/49.jpg)
Thermal vs mechanical energy (cont’d)
mechanical to thermal: stirring of water (mechanical energy input) increases temperature;
thermal to thermal: heating water (initially at T1 on table) on hot plate at temperature T2
causes water temperature to increase (eventually to T2 if hot plate kept at T2); leaving hotwater on table causes temperature of table to increase;
thermal to mechanical: reducing the imposed pressure on a gas (or heating it) and thenallowing it to expand - converting internal energy into mechanical work - will always result inloss of some mechanical energy in the form of heat (due to friction)
(w) (x) (y)
![Page 50: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/50.jpg)
A word on units
Need to standardize units for mechanical and thermal variables
Mechanical variables: force and pressure, volume, work
Thermal variables: temperature, heat
SI units: force - newton, N (kg m/s2 = J/m); pressure - pascal, Pa (kg/m s2 = N/m2);temperature - Kelvin, K; energy (also work, heat) - joule, J (kg m2/s2 = N m)
![Page 51: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/51.jpg)
A word on units
Need to standardize units for mechanical and thermal variables
Mechanical variables: force and pressure, volume, work
Thermal variables: temperature, heat
SI units: force - newton, N (kg m/s2 = J/m); pressure - pascal, Pa (kg/m s2 = N/m2);temperature - Kelvin, K; energy (also work, heat) - joule, J (kg m2/s2 = N m)
![Page 52: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/52.jpg)
A word on units
Need to standardize units for mechanical and thermal variables
Mechanical variables: force and pressure, volume, work
Thermal variables: temperature, heat
SI units: force - newton, N (kg m/s2 = J/m); pressure - pascal, Pa (kg/m s2 = N/m2);temperature - Kelvin, K; energy (also work, heat) - joule, J (kg m2/s2 = N m)
![Page 53: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/53.jpg)
A word on units
Need to standardize units for mechanical and thermal variables
Mechanical variables: force and pressure, volume, work
Thermal variables: temperature, heat
SI units: force - newton, N (kg m/s2 = J/m); pressure - pascal, Pa (kg/m s2 = N/m2);temperature - Kelvin, K; energy (also work, heat) - joule, J (kg m2/s2 = N m)
![Page 54: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/54.jpg)
Outline
1 What is Thermodynamics?
2 Some Thermodynamics Terminology
3 Basic concepts of thermodynamics
4 Thermodynamic equations of state
5 Conservation of Mass
6 Integral formulation of mass balance
7 Multicomponent mass balance
8 Conservation of energyEnergy balance
9 Towards the 2nd Law of Thermodynamics
10 Toward engineering applications: thermodynamic cycles and heat engines
11 Thermodynamic properties of real substances (not ideal gases)Computation of heat and work for thermodynamic processes involving nonideal substancesComputation of entropy changes for thermodynamic processes involving nonideal substances
12 Outline of remaining topics and schedule
13 Further analysis of the behavior of real gases
14 Phase equilibrium
15 More on Gibbs free energy and applications to phase equilibrium
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 18 / 196
![Page 55: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/55.jpg)
Further classification of thermodynamic variables: extensive and intensivevariables
Extensive variable: scale with system size - examples are V ,U. Illustration: The total volumeof a system A + B composed of two subsystems A, B of gas at equilibrium, with volumesVa,Vb is Va + Vb. The total internal energy of a system A + B composed of two subsystemsA, B of gas at equilibrium, with internal energies Ua,Ub, is Ua + Ub.
Intensive variable: size-independent - T ,P. Illustration: Consider a system A + B composedof two subsystems A, B of gas at equilibrium, each at temperature T and pressure P. Thetemperature of the whole system A + B is T and its pressure is P.
Can convert extensive variables to intensive variables by dividing by total mass or moles N:V ≡ V /M; V ≡ V /N
![Page 56: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/56.jpg)
Further classification of thermodynamic variables: extensive and intensivevariables
Extensive variable: scale with system size - examples are V ,U. Illustration: The total volumeof a system A + B composed of two subsystems A, B of gas at equilibrium, with volumesVa,Vb is Va + Vb. The total internal energy of a system A + B composed of two subsystemsA, B of gas at equilibrium, with internal energies Ua,Ub, is Ua + Ub.
Intensive variable: size-independent - T ,P. Illustration: Consider a system A + B composedof two subsystems A, B of gas at equilibrium, each at temperature T and pressure P. Thetemperature of the whole system A + B is T and its pressure is P.
Can convert extensive variables to intensive variables by dividing by total mass or moles N:V ≡ V /M; V ≡ V /N
![Page 57: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/57.jpg)
Further classification of thermodynamic variables: extensive and intensivevariables
Extensive variable: scale with system size - examples are V ,U. Illustration: The total volumeof a system A + B composed of two subsystems A, B of gas at equilibrium, with volumesVa,Vb is Va + Vb. The total internal energy of a system A + B composed of two subsystemsA, B of gas at equilibrium, with internal energies Ua,Ub, is Ua + Ub.
Intensive variable: size-independent - T ,P. Illustration: Consider a system A + B composedof two subsystems A, B of gas at equilibrium, each at temperature T and pressure P. Thetemperature of the whole system A + B is T and its pressure is P.
Can convert extensive variables to intensive variables by dividing by total mass or moles N:V ≡ V /M; V ≡ V /N
![Page 58: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/58.jpg)
State variables and state equations
State variable: any intensive variable of equilibrium system. State variables specify theequilibrium state through state equations.
Equations of state: equations that specify the equilibrium state of a system throughassignment of values to any two intensive variables - typically are written in terms ofvariables P,V ,T in form P = P(T , V ), T = T (P, V ) or V = V (P,T ). These aresystem-specific, unlike thermodynamic laws.
Volumetric vs thermal eqns of state: both use V ,T ; differ in whether P or U is used as thirdvariable. Former more common. When the type (volumetric or thermal) is unspecified, theterm ‘equation of state” refers to volumetric equation of state.
Often it is more convenient to express equations of state in terms of extensive V (example:
PV = NRT vs PV = RT )
![Page 59: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/59.jpg)
State variables and state equations
State variable: any intensive variable of equilibrium system. State variables specify theequilibrium state through state equations.
Equations of state: equations that specify the equilibrium state of a system throughassignment of values to any two intensive variables - typically are written in terms ofvariables P,V ,T in form P = P(T , V ), T = T (P, V ) or V = V (P,T ). These aresystem-specific, unlike thermodynamic laws.
Volumetric vs thermal eqns of state: both use V ,T ; differ in whether P or U is used as thirdvariable. Former more common. When the type (volumetric or thermal) is unspecified, theterm ‘equation of state” refers to volumetric equation of state.
Often it is more convenient to express equations of state in terms of extensive V (example:
PV = NRT vs PV = RT )
![Page 60: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/60.jpg)
State variables and state equations
State variable: any intensive variable of equilibrium system. State variables specify theequilibrium state through state equations.
Equations of state: equations that specify the equilibrium state of a system throughassignment of values to any two intensive variables - typically are written in terms ofvariables P,V ,T in form P = P(T , V ), T = T (P, V ) or V = V (P,T ). These aresystem-specific, unlike thermodynamic laws.
Volumetric vs thermal eqns of state: both use V ,T ; differ in whether P or U is used as thirdvariable. Former more common. When the type (volumetric or thermal) is unspecified, theterm ‘equation of state” refers to volumetric equation of state.
Often it is more convenient to express equations of state in terms of extensive V (example:
PV = NRT vs PV = RT )
![Page 61: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/61.jpg)
State variables and state equations
State variable: any intensive variable of equilibrium system. State variables specify theequilibrium state through state equations.
Equations of state: equations that specify the equilibrium state of a system throughassignment of values to any two intensive variables - typically are written in terms ofvariables P,V ,T in form P = P(T , V ), T = T (P, V ) or V = V (P,T ). These aresystem-specific, unlike thermodynamic laws.
Volumetric vs thermal eqns of state: both use V ,T ; differ in whether P or U is used as thirdvariable. Former more common. When the type (volumetric or thermal) is unspecified, theterm ‘equation of state” refers to volumetric equation of state.
Often it is more convenient to express equations of state in terms of extensive V (example:
PV = NRT vs PV = RT )
![Page 62: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/62.jpg)
What will not be covered
How fast a system will respond to change in constraints and reattain equilibrium - relevantcourses include chemical kinetics, heat/mass transfer, fluid mechanics
We don’t consider these issues here
Statistical mechanics is concerned with the details of the relationship between macroscopicvariables with the microscopic states of the individual molecules (i.e., relations betweenmacrostates and microstates). There are many microstates (e.g., molecular energy levels,molecular velocities) populated by an ensemble of molecules in any given macrostate.
From the perspective of thermodynamics, mechanics refers to only macroscopic motion ofsystems.
Figure :
![Page 63: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/63.jpg)
What will not be covered
How fast a system will respond to change in constraints and reattain equilibrium - relevantcourses include chemical kinetics, heat/mass transfer, fluid mechanics
We don’t consider these issues here
Statistical mechanics is concerned with the details of the relationship between macroscopicvariables with the microscopic states of the individual molecules (i.e., relations betweenmacrostates and microstates). There are many microstates (e.g., molecular energy levels,molecular velocities) populated by an ensemble of molecules in any given macrostate.
From the perspective of thermodynamics, mechanics refers to only macroscopic motion ofsystems.
Figure :
![Page 64: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/64.jpg)
What will not be covered
How fast a system will respond to change in constraints and reattain equilibrium - relevantcourses include chemical kinetics, heat/mass transfer, fluid mechanics
We don’t consider these issues here
Statistical mechanics is concerned with the details of the relationship between macroscopicvariables with the microscopic states of the individual molecules (i.e., relations betweenmacrostates and microstates). There are many microstates (e.g., molecular energy levels,molecular velocities) populated by an ensemble of molecules in any given macrostate.
From the perspective of thermodynamics, mechanics refers to only macroscopic motion ofsystems.
Figure :
![Page 65: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/65.jpg)
What will not be covered
How fast a system will respond to change in constraints and reattain equilibrium - relevantcourses include chemical kinetics, heat/mass transfer, fluid mechanics
We don’t consider these issues here
Statistical mechanics is concerned with the details of the relationship between macroscopicvariables with the microscopic states of the individual molecules (i.e., relations betweenmacrostates and microstates). There are many microstates (e.g., molecular energy levels,molecular velocities) populated by an ensemble of molecules in any given macrostate.
From the perspective of thermodynamics, mechanics refers to only macroscopic motion ofsystems.
Figure :
![Page 66: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/66.jpg)
Outline
1 What is Thermodynamics?
2 Some Thermodynamics Terminology
3 Basic concepts of thermodynamics
4 Thermodynamic equations of state
5 Conservation of Mass
6 Integral formulation of mass balance
7 Multicomponent mass balance
8 Conservation of energyEnergy balance
9 Towards the 2nd Law of Thermodynamics
10 Toward engineering applications: thermodynamic cycles and heat engines
11 Thermodynamic properties of real substances (not ideal gases)Computation of heat and work for thermodynamic processes involving nonideal substancesComputation of entropy changes for thermodynamic processes involving nonideal substances
12 Outline of remaining topics and schedule
13 Further analysis of the behavior of real gases
14 Phase equilibrium
15 More on Gibbs free energy and applications to phase equilibrium
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 22 / 196
![Page 67: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/67.jpg)
Extensive property balances
Balance equations in thermodynamics: choose a system, relate either a) instantaneous rateof change of property with rate of property entering, leaving, or being created within system;b) total change of a property of system with amounts of property that entered, left, andwere created within the system
We call a) the differential or rate of change formulation of balance equation, and b) theintegral formulation of balance equation; we start with a)
Consider any extensive property of a system (e.g., mass, number of moles, or energy); call itθ
dθ/dt = rate at which θ enters system - rate at which θ leaves system + rate at which θ isgenerated within system.
Conserved quantities (e.g. mass of given species): 3rd term is 0
![Page 68: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/68.jpg)
Extensive property balances
Balance equations in thermodynamics: choose a system, relate either a) instantaneous rateof change of property with rate of property entering, leaving, or being created within system;b) total change of a property of system with amounts of property that entered, left, andwere created within the system
We call a) the differential or rate of change formulation of balance equation, and b) theintegral formulation of balance equation; we start with a)
Consider any extensive property of a system (e.g., mass, number of moles, or energy); call itθ
dθ/dt = rate at which θ enters system - rate at which θ leaves system + rate at which θ isgenerated within system.
Conserved quantities (e.g. mass of given species): 3rd term is 0
![Page 69: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/69.jpg)
Extensive property balances
Balance equations in thermodynamics: choose a system, relate either a) instantaneous rateof change of property with rate of property entering, leaving, or being created within system;b) total change of a property of system with amounts of property that entered, left, andwere created within the system
We call a) the differential or rate of change formulation of balance equation, and b) theintegral formulation of balance equation; we start with a)
Consider any extensive property of a system (e.g., mass, number of moles, or energy); call itθ
dθ/dt = rate at which θ enters system - rate at which θ leaves system + rate at which θ isgenerated within system.
Conserved quantities (e.g. mass of given species): 3rd term is 0
![Page 70: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/70.jpg)
Extensive property balances
Balance equations in thermodynamics: choose a system, relate either a) instantaneous rateof change of property with rate of property entering, leaving, or being created within system;b) total change of a property of system with amounts of property that entered, left, andwere created within the system
We call a) the differential or rate of change formulation of balance equation, and b) theintegral formulation of balance equation; we start with a)
Consider any extensive property of a system (e.g., mass, number of moles, or energy); call itθ
dθ/dt = rate at which θ enters system - rate at which θ leaves system + rate at which θ isgenerated within system.
Conserved quantities (e.g. mass of given species): 3rd term is 0
![Page 71: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/71.jpg)
Extensive property balances
Balance equations in thermodynamics: choose a system, relate either a) instantaneous rateof change of property with rate of property entering, leaving, or being created within system;b) total change of a property of system with amounts of property that entered, left, andwere created within the system
We call a) the differential or rate of change formulation of balance equation, and b) theintegral formulation of balance equation; we start with a)
Consider any extensive property of a system (e.g., mass, number of moles, or energy); call itθ
dθ/dt = rate at which θ enters system - rate at which θ leaves system + rate at which θ isgenerated within system.
Conserved quantities (e.g. mass of given species): 3rd term is 0
![Page 72: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/72.jpg)
Mass flow across multiple system boundaries: rate of change
Recall open systems are those for which mass can enter or exit system across boundaries.We will first consider mass balance calculations, and later energy balance (which also applyto closed systems)
Consider mass flow across system boundaries indexed by k - denote mass by M
dM/dt =∑
k Mk (mass) where Mk denotes the rate of mass flowing in through port k
dN/dt =∑
k Nk (number of moles N = M/mw where mw denotes the molecular weight)
Sign (+/-) on each∑
k Mk , Nk is determined by direction of mass flow (flow enteringsystem: +; flow leaving system: -)
![Page 73: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/73.jpg)
Mass flow across multiple system boundaries: rate of change
Recall open systems are those for which mass can enter or exit system across boundaries.We will first consider mass balance calculations, and later energy balance (which also applyto closed systems)
Consider mass flow across system boundaries indexed by k - denote mass by M
dM/dt =∑
k Mk (mass) where Mk denotes the rate of mass flowing in through port k
dN/dt =∑
k Nk (number of moles N = M/mw where mw denotes the molecular weight)
Sign (+/-) on each∑
k Mk , Nk is determined by direction of mass flow (flow enteringsystem: +; flow leaving system: -)
![Page 74: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/74.jpg)
Mass flow across multiple system boundaries: rate of change
Recall open systems are those for which mass can enter or exit system across boundaries.We will first consider mass balance calculations, and later energy balance (which also applyto closed systems)
Consider mass flow across system boundaries indexed by k - denote mass by M
dM/dt =∑
k Mk (mass) where Mk denotes the rate of mass flowing in through port k
dN/dt =∑
k Nk (number of moles N = M/mw where mw denotes the molecular weight)
Sign (+/-) on each∑
k Mk , Nk is determined by direction of mass flow (flow enteringsystem: +; flow leaving system: -)
![Page 75: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/75.jpg)
Mass flow across multiple system boundaries: rate of change
Recall open systems are those for which mass can enter or exit system across boundaries.We will first consider mass balance calculations, and later energy balance (which also applyto closed systems)
Consider mass flow across system boundaries indexed by k - denote mass by M
dM/dt =∑
k Mk (mass) where Mk denotes the rate of mass flowing in through port k
dN/dt =∑
k Nk (number of moles N = M/mw where mw denotes the molecular weight)
Sign (+/-) on each∑
k Mk , Nk is determined by direction of mass flow (flow enteringsystem: +; flow leaving system: -)
![Page 76: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/76.jpg)
Mass flow across multiple system boundaries: rate of change
Recall open systems are those for which mass can enter or exit system across boundaries.We will first consider mass balance calculations, and later energy balance (which also applyto closed systems)
Consider mass flow across system boundaries indexed by k - denote mass by M
dM/dt =∑
k Mk (mass) where Mk denotes the rate of mass flowing in through port k
dN/dt =∑
k Nk (number of moles N = M/mw where mw denotes the molecular weight)
Sign (+/-) on each∑
k Mk , Nk is determined by direction of mass flow (flow enteringsystem: +; flow leaving system: -)
![Page 77: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/77.jpg)
Outline
1 What is Thermodynamics?
2 Some Thermodynamics Terminology
3 Basic concepts of thermodynamics
4 Thermodynamic equations of state
5 Conservation of Mass
6 Integral formulation of mass balance
7 Multicomponent mass balance
8 Conservation of energyEnergy balance
9 Towards the 2nd Law of Thermodynamics
10 Toward engineering applications: thermodynamic cycles and heat engines
11 Thermodynamic properties of real substances (not ideal gases)Computation of heat and work for thermodynamic processes involving nonideal substancesComputation of entropy changes for thermodynamic processes involving nonideal substances
12 Outline of remaining topics and schedule
13 Further analysis of the behavior of real gases
14 Phase equilibrium
15 More on Gibbs free energy and applications to phase equilibrium
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 25 / 196
![Page 78: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/78.jpg)
Now we ask: During a specified interval of time between t1 and t2, how much has the massof the system changed?
First find total mass that entered between times t1 and t2 through a given port bycalculating integral of the rate of mass flow through port over time:
∫ t2t1
Mk dt
Then M(t2)−M(t1) =∑
k
∫ t2t1
Mk dt4=∑
k ∆Mk
Constant flow rates:∫ t2
t1Mk dt = Mk
∫ t2t1
dt = Mk ∆t
Constant flow rates: M(t2)−M(t1) =∑
k Mk ∆t
![Page 79: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/79.jpg)
Now we ask: During a specified interval of time between t1 and t2, how much has the massof the system changed?
First find total mass that entered between times t1 and t2 through a given port bycalculating integral of the rate of mass flow through port over time:
∫ t2t1
Mk dt
Then M(t2)−M(t1) =∑
k
∫ t2t1
Mk dt4=∑
k ∆Mk
Constant flow rates:∫ t2
t1Mk dt = Mk
∫ t2t1
dt = Mk ∆t
Constant flow rates: M(t2)−M(t1) =∑
k Mk ∆t
![Page 80: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/80.jpg)
Now we ask: During a specified interval of time between t1 and t2, how much has the massof the system changed?
First find total mass that entered between times t1 and t2 through a given port bycalculating integral of the rate of mass flow through port over time:
∫ t2t1
Mk dt
Then M(t2)−M(t1) =∑
k
∫ t2t1
Mk dt4=∑
k ∆Mk
Constant flow rates:∫ t2
t1Mk dt = Mk
∫ t2t1
dt = Mk ∆t
Constant flow rates: M(t2)−M(t1) =∑
k Mk ∆t
![Page 81: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/81.jpg)
Now we ask: During a specified interval of time between t1 and t2, how much has the massof the system changed?
First find total mass that entered between times t1 and t2 through a given port bycalculating integral of the rate of mass flow through port over time:
∫ t2t1
Mk dt
Then M(t2)−M(t1) =∑
k
∫ t2t1
Mk dt4=∑
k ∆Mk
Constant flow rates:∫ t2
t1Mk dt = Mk
∫ t2t1
dt = Mk ∆t
Constant flow rates: M(t2)−M(t1) =∑
k Mk ∆t
![Page 82: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/82.jpg)
Now we ask: During a specified interval of time between t1 and t2, how much has the massof the system changed?
First find total mass that entered between times t1 and t2 through a given port bycalculating integral of the rate of mass flow through port over time:
∫ t2t1
Mk dt
Then M(t2)−M(t1) =∑
k
∫ t2t1
Mk dt4=∑
k ∆Mk
Constant flow rates:∫ t2
t1Mk dt = Mk
∫ t2t1
dt = Mk ∆t
Constant flow rates: M(t2)−M(t1) =∑
k Mk ∆t
![Page 83: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/83.jpg)
Example 2.2-3
Gas is being removed from high-pressure storage tank through device that removes 1% ofcurrent content each minute. Tank initially contains 1000 mol gas. How much remains after20 min?
Note: variable mass flow rate that depends on the current mass
Use integral form of mass balance (molar basis) with a single port, solving the differentialequation, to find final number of moles
dN
dt= −0.01N∫ t2
t1
1
N
dN
dtdt =
∫ t2
t1
−0.01 dt∫ N(t2)
N(t1)
1
NdN = −0.01(t2 − t1)
ln(N(t2))− ln(N(t1)) = −0.01(t2 − t1)
ln(N(t2)/N(t1)) = −0.01(t2 − t1)
N(t2) = N(t1) exp[−0.01(t2 − t1)]
= (1000 mol)× exp(−0.2)
![Page 84: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/84.jpg)
Example 2.2-3
Gas is being removed from high-pressure storage tank through device that removes 1% ofcurrent content each minute. Tank initially contains 1000 mol gas. How much remains after20 min?
Note: variable mass flow rate that depends on the current mass
Use integral form of mass balance (molar basis) with a single port, solving the differentialequation, to find final number of moles
dN
dt= −0.01N∫ t2
t1
1
N
dN
dtdt =
∫ t2
t1
−0.01 dt∫ N(t2)
N(t1)
1
NdN = −0.01(t2 − t1)
ln(N(t2))− ln(N(t1)) = −0.01(t2 − t1)
ln(N(t2)/N(t1)) = −0.01(t2 − t1)
N(t2) = N(t1) exp[−0.01(t2 − t1)]
= (1000 mol)× exp(−0.2)
![Page 85: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/85.jpg)
Example 2.2-3
Gas is being removed from high-pressure storage tank through device that removes 1% ofcurrent content each minute. Tank initially contains 1000 mol gas. How much remains after20 min?
Note: variable mass flow rate that depends on the current mass
Use integral form of mass balance (molar basis) with a single port, solving the differentialequation, to find final number of moles
dN
dt= −0.01N∫ t2
t1
1
N
dN
dtdt =
∫ t2
t1
−0.01 dt∫ N(t2)
N(t1)
1
NdN = −0.01(t2 − t1)
ln(N(t2))− ln(N(t1)) = −0.01(t2 − t1)
ln(N(t2)/N(t1)) = −0.01(t2 − t1)
N(t2) = N(t1) exp[−0.01(t2 − t1)]
= (1000 mol)× exp(−0.2)
![Page 86: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/86.jpg)
Outline
1 What is Thermodynamics?
2 Some Thermodynamics Terminology
3 Basic concepts of thermodynamics
4 Thermodynamic equations of state
5 Conservation of Mass
6 Integral formulation of mass balance
7 Multicomponent mass balance
8 Conservation of energyEnergy balance
9 Towards the 2nd Law of Thermodynamics
10 Toward engineering applications: thermodynamic cycles and heat engines
11 Thermodynamic properties of real substances (not ideal gases)Computation of heat and work for thermodynamic processes involving nonideal substancesComputation of entropy changes for thermodynamic processes involving nonideal substances
12 Outline of remaining topics and schedule
13 Further analysis of the behavior of real gases
14 Phase equilibrium
15 More on Gibbs free energy and applications to phase equilibrium
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 28 / 196
![Page 87: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/87.jpg)
Pure component vs multicomponent mass balance
Multicomponent mass balance, assuming no chemical reactions:dNi/dt =
∑k (Ni )k , i = 1, · · · , n
Here Ni denotes the number of moles of species i in the system; k again indexes the portsthrough which species i can enter/leave
For example, consider both (inert) argon (species i = 1) and neon gas (species i = 2)entering through each port
Each Ni balance can be considered separately (n independent equations for ncomponents/species) if there are no reactions
What if chemical reactions are possible (e.g. C2H4 and Cl2 entering, where reactionC2H4 + Cl2 → C2H4Cl2 can occur)?
![Page 88: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/88.jpg)
Pure component vs multicomponent mass balance
Multicomponent mass balance, assuming no chemical reactions:dNi/dt =
∑k (Ni )k , i = 1, · · · , n
Here Ni denotes the number of moles of species i in the system; k again indexes the portsthrough which species i can enter/leave
For example, consider both (inert) argon (species i = 1) and neon gas (species i = 2)entering through each port
Each Ni balance can be considered separately (n independent equations for ncomponents/species) if there are no reactions
What if chemical reactions are possible (e.g. C2H4 and Cl2 entering, where reactionC2H4 + Cl2 → C2H4Cl2 can occur)?
![Page 89: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/89.jpg)
Pure component vs multicomponent mass balance
Multicomponent mass balance, assuming no chemical reactions:dNi/dt =
∑k (Ni )k , i = 1, · · · , n
Here Ni denotes the number of moles of species i in the system; k again indexes the portsthrough which species i can enter/leave
For example, consider both (inert) argon (species i = 1) and neon gas (species i = 2)entering through each port
Each Ni balance can be considered separately (n independent equations for ncomponents/species) if there are no reactions
What if chemical reactions are possible (e.g. C2H4 and Cl2 entering, where reactionC2H4 + Cl2 → C2H4Cl2 can occur)?
![Page 90: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/90.jpg)
Pure component vs multicomponent mass balance
Multicomponent mass balance, assuming no chemical reactions:dNi/dt =
∑k (Ni )k , i = 1, · · · , n
Here Ni denotes the number of moles of species i in the system; k again indexes the portsthrough which species i can enter/leave
For example, consider both (inert) argon (species i = 1) and neon gas (species i = 2)entering through each port
Each Ni balance can be considered separately (n independent equations for ncomponents/species) if there are no reactions
What if chemical reactions are possible (e.g. C2H4 and Cl2 entering, where reactionC2H4 + Cl2 → C2H4Cl2 can occur)?
![Page 91: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/91.jpg)
Pure component vs multicomponent mass balance
Multicomponent mass balance, assuming no chemical reactions:dNi/dt =
∑k (Ni )k , i = 1, · · · , n
Here Ni denotes the number of moles of species i in the system; k again indexes the portsthrough which species i can enter/leave
For example, consider both (inert) argon (species i = 1) and neon gas (species i = 2)entering through each port
Each Ni balance can be considered separately (n independent equations for ncomponents/species) if there are no reactions
What if chemical reactions are possible (e.g. C2H4 and Cl2 entering, where reactionC2H4 + Cl2 → C2H4Cl2 can occur)?
![Page 92: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/92.jpg)
Differential formulation
Now assume chemical reactions among species can occur
dNi/dt =∑
k (Ni )k + (dNi/dt)rxn
The second term denotes the rate of formation of species i due to chemical reactions (massof species i no longer conserved; species can be created and destroyed)
![Page 93: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/93.jpg)
Differential formulation
Now assume chemical reactions among species can occur
dNi/dt =∑
k (Ni )k + (dNi/dt)rxn
The second term denotes the rate of formation of species i due to chemical reactions (massof species i no longer conserved; species can be created and destroyed)
![Page 94: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/94.jpg)
Differential formulation
Now assume chemical reactions among species can occur
dNi/dt =∑
k (Ni )k + (dNi/dt)rxn
The second term denotes the rate of formation of species i due to chemical reactions (massof species i no longer conserved; species can be created and destroyed)
![Page 95: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/95.jpg)
Integral (difference) formulation
Ni (t2)− Ni (t1) =∫ t2
t1
∑k (Ni )k + (dNi/dt)rxn dt
First term on rhs is change in number of moles of species due to flow streams; second termon rhs is change in
![Page 96: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/96.jpg)
Integral (difference) formulation
Ni (t2)− Ni (t1) =∫ t2
t1
∑k (Ni )k + (dNi/dt)rxn dt
First term on rhs is change in number of moles of species due to flow streams; second termon rhs is change in
![Page 97: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/97.jpg)
Molar extent of reaction
Note that (dNi/dt)rxn’s for different species are not all independent. For example, if twospecies are involved in the same reaction, their (dNi/dt)rxn’s are related by the respectivestochiometric coefficients. Consider a single general chemical reaction
ν1A + ν2B + · · ·� νj R + · · ·
Here νj denotes the stochiometric coefficient of species j (here R). Assume ν1 = 1, and thatafter a specified time t, X moles of A are consumed. Then ((Nj )rxn =)νj X moles of R areproduced in time t. X is called the molar extent of reaction.
We do not consider scenarios with more than one chemical reaction
![Page 98: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/98.jpg)
Molar extent of reaction
Note that (dNi/dt)rxn’s for different species are not all independent. For example, if twospecies are involved in the same reaction, their (dNi/dt)rxn’s are related by the respectivestochiometric coefficients. Consider a single general chemical reaction
ν1A + ν2B + · · ·� νj R + · · ·
Here νj denotes the stochiometric coefficient of species j (here R). Assume ν1 = 1, and thatafter a specified time t, X moles of A are consumed. Then ((Nj )rxn =)νj X moles of R areproduced in time t. X is called the molar extent of reaction.
We do not consider scenarios with more than one chemical reaction
![Page 99: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/99.jpg)
Molar extent of reaction
Note that (dNi/dt)rxn’s for different species are not all independent. For example, if twospecies are involved in the same reaction, their (dNi/dt)rxn’s are related by the respectivestochiometric coefficients. Consider a single general chemical reaction
ν1A + ν2B + · · ·� νj R + · · ·
Here νj denotes the stochiometric coefficient of species j (here R). Assume ν1 = 1, and thatafter a specified time t, X moles of A are consumed. Then ((Nj )rxn =)νj X moles of R areproduced in time t. X is called the molar extent of reaction.
We do not consider scenarios with more than one chemical reaction
![Page 100: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/100.jpg)
Differential formulation using molar extent of reaction
Using this notation, we have for the mass balance equations for species 1 and j
dN1/dt =∑
k
(N1)k + (dN1/dt)rxn
=∑
k
(N1)k − (dX/dt)rxn
dNj/dt =∑
k
(Nj )k + νj (dX/dt)rxn
The latter equation is the general expression we will use for all species
![Page 101: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/101.jpg)
Differential formulation using molar extent of reaction
Using this notation, we have for the mass balance equations for species 1 and j
dN1/dt =∑
k
(N1)k + (dN1/dt)rxn
=∑
k
(N1)k − (dX/dt)rxn
dNj/dt =∑
k
(Nj )k + νj (dX/dt)rxn
The latter equation is the general expression we will use for all species
![Page 102: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/102.jpg)
Multicomponent mass balance involving chemical reactions: example
Consider the following chemical reaction: C2H4 + Cl2 → C2H4Cl2
Assume stream 1 is pure C2H4, stream 2 is pure Cl2. Assume all species can flow outthrough stream 3.
The differential formulation of mass balance is
d
dtNC2H4
= (NC2H4)1 + (NC2H4
)3 +
(dNC2H4
dt
)rxn
d
dtNC12
= (NCl2 )2 + (NCl2 )3 +
(dNCl2
dt
)rxn
d
dtNC2H4Cl2 = (NC2H4Cl2 )3 +
(dNC2H4Cl2
dt
)rxn
which using the molar extent of reaction notation above can be expressed
d
dtNC2H4
= (NC2H4)1 + (NC2H4
)3 −dX
dtd
dtNC12
= (NCl2 )2 + (NCl2 )3 −dX
dtd
dtNC2H4Cl2 = (NC2H4Cl2 )3 +
dX
dt
![Page 103: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/103.jpg)
Multicomponent mass balance involving chemical reactions: example
Consider the following chemical reaction: C2H4 + Cl2 → C2H4Cl2
Assume stream 1 is pure C2H4, stream 2 is pure Cl2. Assume all species can flow outthrough stream 3.
The differential formulation of mass balance is
d
dtNC2H4
= (NC2H4)1 + (NC2H4
)3 +
(dNC2H4
dt
)rxn
d
dtNC12
= (NCl2 )2 + (NCl2 )3 +
(dNCl2
dt
)rxn
d
dtNC2H4Cl2 = (NC2H4Cl2 )3 +
(dNC2H4Cl2
dt
)rxn
which using the molar extent of reaction notation above can be expressed
d
dtNC2H4
= (NC2H4)1 + (NC2H4
)3 −dX
dtd
dtNC12
= (NCl2 )2 + (NCl2 )3 −dX
dtd
dtNC2H4Cl2 = (NC2H4Cl2 )3 +
dX
dt
![Page 104: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/104.jpg)
Multicomponent mass balance involving chemical reactions: example
Consider the following chemical reaction: C2H4 + Cl2 → C2H4Cl2
Assume stream 1 is pure C2H4, stream 2 is pure Cl2. Assume all species can flow outthrough stream 3.
The differential formulation of mass balance is
d
dtNC2H4
= (NC2H4)1 + (NC2H4
)3 +
(dNC2H4
dt
)rxn
d
dtNC12
= (NCl2 )2 + (NCl2 )3 +
(dNCl2
dt
)rxn
d
dtNC2H4Cl2 = (NC2H4Cl2 )3 +
(dNC2H4Cl2
dt
)rxn
which using the molar extent of reaction notation above can be expressed
d
dtNC2H4
= (NC2H4)1 + (NC2H4
)3 −dX
dtd
dtNC12
= (NCl2 )2 + (NCl2 )3 −dX
dtd
dtNC2H4Cl2 = (NC2H4Cl2 )3 +
dX
dt
![Page 105: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/105.jpg)
Outline
1 What is Thermodynamics?
2 Some Thermodynamics Terminology
3 Basic concepts of thermodynamics
4 Thermodynamic equations of state
5 Conservation of Mass
6 Integral formulation of mass balance
7 Multicomponent mass balance
8 Conservation of energyEnergy balance
9 Towards the 2nd Law of Thermodynamics
10 Toward engineering applications: thermodynamic cycles and heat engines
11 Thermodynamic properties of real substances (not ideal gases)Computation of heat and work for thermodynamic processes involving nonideal substancesComputation of entropy changes for thermodynamic processes involving nonideal substances
12 Outline of remaining topics and schedule
13 Further analysis of the behavior of real gases
14 Phase equilibrium
15 More on Gibbs free energy and applications to phase equilibrium
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 35 / 196
![Page 106: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/106.jpg)
Total energy of system
E = U + M(v2/2 + gh)
Where U: internal energy M: total mass; v : center of mass velocity; g : acceleration due togravity; h: height of center of mass
We now consider energy balance formulations
![Page 107: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/107.jpg)
Total energy of system
E = U + M(v2/2 + gh)
Where U: internal energy M: total mass; v : center of mass velocity; g : acceleration due togravity; h: height of center of mass
We now consider energy balance formulations
![Page 108: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/108.jpg)
Differential formulation
dE/dt = rate energy in− rate energy out
First law of thermodynamics: energy is a conserved quantity; hence there is no third termpertaining to creation of energy
![Page 109: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/109.jpg)
Work done by/on a system
Mechanical work can be expressed W = −F ∆x for a constant force F . This is work done bya system, which reduces its energy
For a variable force F (x), we have W = −∫ x2
x1F (x) dx
Infinitesimal work element: dW = −F (x)dx
In thermodynamics, we are concerned with work done by or on a system, given the pressureP of the system or a system it is in contact with
Express work in terms of pressure, volume rather than force, distance:
dW = −(F (x)/A)Adx
= −PdV
Note the internal energy of the system decreases when ∆V > 0 (expansion) and increaseswhen ∆V < 0 (compression)
![Page 110: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/110.jpg)
Rate of change of work
For the differential form of energy balance, we need the rate of change of work.
Now consider that V is changing with time at rate dVdt
. What is rate of change of work?
Work: Rate of change of work dWdt
= −PdV /dt
Rate of change of heat: assume it can enter from anywhere at a total rate of dQdt
![Page 111: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/111.jpg)
Integral formulation of energy balance
U2 − U1 = Q + W
Q =
∫ t2
t1
dQ
dtdt
W =
∫ t2
t1
dW
dtdt
= −∫ t2
t1
PdV /dt dt = −∫ V2
V1
P dV
This energy balance follows from first law of thermo
Change in V required for nonzero work
How do we determine P(V ) in order to compute the work? Must choose a specific systemsince laws of thermodynamics do not specify relationships between state variables
![Page 112: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/112.jpg)
Introducing the ideal gas
Ideal gas - A gas with pressure so low that intermolecular interactions can be ignored
Volumetric equation of state for ideal gas: PV = NRT or PV = RT (intensive variables; Vis molar volume)
Given any two of the three state variables (P,V ,T ), this equation of state allows us to solvefor the remaining state variable.
The equation of state allows us compute the energy (U) change in response to changes ofthe state variable V due to work done on/by the system, since we can write P = P(V ,T ) inthe integral above
This applies to systems not in mechanical equilibrium; work is done during process ofmechanical equilibration.
How do I compute the energy change due to heat Q exchange for interacting systems withdifferent values of T ? We have not said anything about how heat Q exchanged relates tochanges in the temperature T as the systems equilibrate thermally to reach the same valueof T .
![Page 113: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/113.jpg)
Temperature dependence of internal energy
Assume to start that there is no work done: ∆V = 0
What is the equation used to compute Q given a specified change ∆T = T2 − T1 oftemperature of a system? The equation of state is not enough; we need an equation likeW = −P∆V
Introduce temperature dependence of internal energy per mole (J/mol K)- constant volumeheat capacity:
CV (T ,V ) =
(∂U
∂T
)V
where U is molar internal energy
Note that there is no macroscopic motion during equilibration analogous to change of V inmechanical equilibration above.
Then the heat required is Q = N∫ T2
T1CV (T ,V ) dT . Since there is no work done, the change
in internal energy ∆U = Q.
For ideal gas, CV = CV (T ) and hence we can replace partial derivative with total:
CV (T ) = dUdT
But how do we find CV ? Temperature dependence of internal energy and enthalpy areproperties of the ideal gas, and have been determined experimentally
![Page 114: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/114.jpg)
Example: Isovolumetric heating (physical picture)
Consider gas inside a cylinder with piston where the volume V1 is fixed by a clamp(translation: mechanically isolated). The initial temperature is T1.
The entire system is immersed in a large heat bath (for example, a pool of water attemperature T2). Since it is large, the bath’s temperature does not change appreciably.Alternatively, consider heating on a hot plate.
How much energy in the form of heat Q is absorbed by the gas?
Answer: Q = ∆U = NCv (T2 − T1) where the heat capacity Cv is an experimentallymeasured property of the gas.
![Page 115: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/115.jpg)
Example: Isovolumetric heating (physical picture)
Consider gas inside a cylinder with piston where the volume V1 is fixed by a clamp(translation: mechanically isolated). The initial temperature is T1.
The entire system is immersed in a large heat bath (for example, a pool of water attemperature T2). Since it is large, the bath’s temperature does not change appreciably.Alternatively, consider heating on a hot plate.
How much energy in the form of heat Q is absorbed by the gas?
Answer: Q = ∆U = NCv (T2 − T1) where the heat capacity Cv is an experimentallymeasured property of the gas.
![Page 116: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/116.jpg)
Example: Isovolumetric heating (physical picture)
Consider gas inside a cylinder with piston where the volume V1 is fixed by a clamp(translation: mechanically isolated). The initial temperature is T1.
The entire system is immersed in a large heat bath (for example, a pool of water attemperature T2). Since it is large, the bath’s temperature does not change appreciably.Alternatively, consider heating on a hot plate.
How much energy in the form of heat Q is absorbed by the gas?
Answer: Q = ∆U = NCv (T2 − T1) where the heat capacity Cv is an experimentallymeasured property of the gas.
![Page 117: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/117.jpg)
Example: Isovolumetric heating (physical picture)
Consider gas inside a cylinder with piston where the volume V1 is fixed by a clamp(translation: mechanically isolated). The initial temperature is T1.
The entire system is immersed in a large heat bath (for example, a pool of water attemperature T2). Since it is large, the bath’s temperature does not change appreciably.Alternatively, consider heating on a hot plate.
How much energy in the form of heat Q is absorbed by the gas?
Answer: Q = ∆U = NCv (T2 − T1) where the heat capacity Cv is an experimentallymeasured property of the gas.
![Page 118: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/118.jpg)
Example: Isovolumetric heating (physical picture)
![Page 119: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/119.jpg)
Example: Isothermal expansion (physical picture)
The equation of state of a system, together with its heat capacity, allows computation ofheat and work for a wide variety of processes involving different constraints on the statevariables. We now consider some more examples in the case of an ideal gas.
In these examples, both heat and work will be exchanged, so we will apply the equations wehave learned for both.
Isothermal process: constant T = T0
Consider gas inside a cylinder with piston where the volume V1 is fixed by a clamp(translation: mechanically isolated initially). The entire system is immersed in a large heatbath (for example, a pool of water at temperature T0).
Suddenly, the clamp is released, so the gas expands to equilibrate mechanically. The clamp isreplaced when the gas reaches volume V2.
![Page 120: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/120.jpg)
Example: Isothermal expansion (physical picture)
The equation of state of a system, together with its heat capacity, allows computation ofheat and work for a wide variety of processes involving different constraints on the statevariables. We now consider some more examples in the case of an ideal gas.
In these examples, both heat and work will be exchanged, so we will apply the equations wehave learned for both.
Isothermal process: constant T = T0
Consider gas inside a cylinder with piston where the volume V1 is fixed by a clamp(translation: mechanically isolated initially). The entire system is immersed in a large heatbath (for example, a pool of water at temperature T0).
Suddenly, the clamp is released, so the gas expands to equilibrate mechanically. The clamp isreplaced when the gas reaches volume V2.
![Page 121: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/121.jpg)
Example: Isothermal expansion (physical picture)
The equation of state of a system, together with its heat capacity, allows computation ofheat and work for a wide variety of processes involving different constraints on the statevariables. We now consider some more examples in the case of an ideal gas.
In these examples, both heat and work will be exchanged, so we will apply the equations wehave learned for both.
Isothermal process: constant T = T0
Consider gas inside a cylinder with piston where the volume V1 is fixed by a clamp(translation: mechanically isolated initially). The entire system is immersed in a large heatbath (for example, a pool of water at temperature T0).
Suddenly, the clamp is released, so the gas expands to equilibrate mechanically. The clamp isreplaced when the gas reaches volume V2.
![Page 122: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/122.jpg)
Example: Isothermal expansion (physical picture)
The equation of state of a system, together with its heat capacity, allows computation ofheat and work for a wide variety of processes involving different constraints on the statevariables. We now consider some more examples in the case of an ideal gas.
In these examples, both heat and work will be exchanged, so we will apply the equations wehave learned for both.
Isothermal process: constant T = T0
Consider gas inside a cylinder with piston where the volume V1 is fixed by a clamp(translation: mechanically isolated initially). The entire system is immersed in a large heatbath (for example, a pool of water at temperature T0).
Suddenly, the clamp is released, so the gas expands to equilibrate mechanically. The clamp isreplaced when the gas reaches volume V2.
![Page 123: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/123.jpg)
Example: Isothermal expansion (physical picture)
The equation of state of a system, together with its heat capacity, allows computation ofheat and work for a wide variety of processes involving different constraints on the statevariables. We now consider some more examples in the case of an ideal gas.
In these examples, both heat and work will be exchanged, so we will apply the equations wehave learned for both.
Isothermal process: constant T = T0
Consider gas inside a cylinder with piston where the volume V1 is fixed by a clamp(translation: mechanically isolated initially). The entire system is immersed in a large heatbath (for example, a pool of water at temperature T0).
Suddenly, the clamp is released, so the gas expands to equilibrate mechanically. The clamp isreplaced when the gas reaches volume V2.
![Page 124: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/124.jpg)
Example: Isothermal expansion (physical picture)
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 46 / 196
![Page 125: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/125.jpg)
Example: Isothermal expansion (physical picture)
Compute a) the work W , b) the heat Q, and c) the total change in energy ∆U for thisprocess.
Energy balance: as the gas expands, doing work, ∆U = Q + W would decrease if not forheat from the bath. This would lead to a decrease in T since U = U(T ) for an ideal gas.
Since the bath keeps T = T0, U does not decrease. The gas absorbs heat Q from the bathso that ∆U = Q + W = 0. Thus once we have found W (using the equation for work andthe state equation), we can solve for Q.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 47 / 196
![Page 126: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/126.jpg)
Example: Isothermal expansion (physical picture)
Compute a) the work W , b) the heat Q, and c) the total change in energy ∆U for thisprocess.
Energy balance: as the gas expands, doing work, ∆U = Q + W would decrease if not forheat from the bath. This would lead to a decrease in T since U = U(T ) for an ideal gas.
Since the bath keeps T = T0, U does not decrease. The gas absorbs heat Q from the bathso that ∆U = Q + W = 0. Thus once we have found W (using the equation for work andthe state equation), we can solve for Q.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 47 / 196
![Page 127: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/127.jpg)
Example: Isothermal expansion (physical picture)
Compute a) the work W , b) the heat Q, and c) the total change in energy ∆U for thisprocess.
Energy balance: as the gas expands, doing work, ∆U = Q + W would decrease if not forheat from the bath. This would lead to a decrease in T since U = U(T ) for an ideal gas.
Since the bath keeps T = T0, U does not decrease. The gas absorbs heat Q from the bathso that ∆U = Q + W = 0. Thus once we have found W (using the equation for work andthe state equation), we can solve for Q.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 47 / 196
![Page 128: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/128.jpg)
Example: Isothermal expansion
Isothermal process: constraint is T = T0 fixed; P,V variable; P = P(V ,T0)
First compute the work W in an isothermal compression/expansion:
W = −∫ V2
V1
P(V ,T ) dV
P(V ,T ) = P(V ,T0)
= NRT0/V from state equation
W = −∫ V2
V1
NRT0/V dV
= −NRT0 ln(V2/V1)
![Page 129: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/129.jpg)
Example: Isothermal expansion
Isothermal process: constraint is T = T0 fixed; P,V variable; P = P(V ,T0)
First compute the work W in an isothermal compression/expansion:
W = −∫ V2
V1
P(V ,T ) dV
P(V ,T ) = P(V ,T0)
= NRT0/V from state equation
W = −∫ V2
V1
NRT0/V dV
= −NRT0 ln(V2/V1)
![Page 130: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/130.jpg)
Isothermal expansion (cont’d)
Now compute the heat Q exchanged using energy balance and the heat capacity equation:
∆U = Q + W
= NCv × (T0 − T0) = 0 since U = U(T) for ideal gas
= 0
Q = −W
Heat must be absorbed to keep T constant during the expansion since the system’s internalenergy decreases due to work done
![Page 131: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/131.jpg)
Isothermal expansion (cont’d)
Now compute the heat Q exchanged using energy balance and the heat capacity equation:
∆U = Q + W
= NCv × (T0 − T0) = 0 since U = U(T) for ideal gas
= 0
Q = −W
Heat must be absorbed to keep T constant during the expansion since the system’s internalenergy decreases due to work done
![Page 132: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/132.jpg)
Steps in setting up heat and work calculations: isothermal expansion ofideal gas
1 What is the constraint? T = T0
2 Based on the answer to 1), determine whether the heat (Q), work (W ) or total energychange ∆U can be set to 0. ∆U = 0 since U = U(T0)
3 Is it a shift away from thermal or mechanical equilibrium that initiates the change of state?Shift from mechanical equilibrium due to release of clamp.
4 If the change of state is initiated by a shift away from mechanical equilibrium, set up anequation for energy balance in terms of the change in volume (note name: isothermalexpansion). (If volume is not directly given to you, use the state equation to get it.)
∆U = Q + W
∆U = Q −∫ V2
V1
P(V ,T ) dV
5 Use a) the equation for heat capacity and b) the equation of state to simplify the energybalance equation. Heat capacity: ∆U = NCv ×∆T; Equation of state:P(V,T) = NRT0/V
6 Set terms in the energy balance to 0 based on the constraints identified above. ∆T = 0implies ∆U = 0
7 Solve the equations for the Q,W and ∆U if a state variable change is specified.W = −NRT0 ln(V2/V1); ∆U = 0; Q = −W.
![Page 133: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/133.jpg)
Steps in setting up heat and work calculations: isothermal expansion ofideal gas
1 What is the constraint? T = T0
2 Based on the answer to 1), determine whether the heat (Q), work (W ) or total energychange ∆U can be set to 0. ∆U = 0 since U = U(T0)
3 Is it a shift away from thermal or mechanical equilibrium that initiates the change of state?Shift from mechanical equilibrium due to release of clamp.
4 If the change of state is initiated by a shift away from mechanical equilibrium, set up anequation for energy balance in terms of the change in volume (note name: isothermalexpansion). (If volume is not directly given to you, use the state equation to get it.)
∆U = Q + W
∆U = Q −∫ V2
V1
P(V ,T ) dV
5 Use a) the equation for heat capacity and b) the equation of state to simplify the energybalance equation. Heat capacity: ∆U = NCv ×∆T; Equation of state:P(V,T) = NRT0/V
6 Set terms in the energy balance to 0 based on the constraints identified above. ∆T = 0implies ∆U = 0
7 Solve the equations for the Q,W and ∆U if a state variable change is specified.W = −NRT0 ln(V2/V1); ∆U = 0; Q = −W.
![Page 134: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/134.jpg)
Steps in setting up heat and work calculations: isothermal expansion ofideal gas
1 What is the constraint? T = T0
2 Based on the answer to 1), determine whether the heat (Q), work (W ) or total energychange ∆U can be set to 0. ∆U = 0 since U = U(T0)
3 Is it a shift away from thermal or mechanical equilibrium that initiates the change of state?Shift from mechanical equilibrium due to release of clamp.
4 If the change of state is initiated by a shift away from mechanical equilibrium, set up anequation for energy balance in terms of the change in volume (note name: isothermalexpansion). (If volume is not directly given to you, use the state equation to get it.)
∆U = Q + W
∆U = Q −∫ V2
V1
P(V ,T ) dV
5 Use a) the equation for heat capacity and b) the equation of state to simplify the energybalance equation. Heat capacity: ∆U = NCv ×∆T; Equation of state:P(V,T) = NRT0/V
6 Set terms in the energy balance to 0 based on the constraints identified above. ∆T = 0implies ∆U = 0
7 Solve the equations for the Q,W and ∆U if a state variable change is specified.W = −NRT0 ln(V2/V1); ∆U = 0; Q = −W.
![Page 135: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/135.jpg)
Steps in setting up heat and work calculations: isothermal expansion ofideal gas
1 What is the constraint? T = T0
2 Based on the answer to 1), determine whether the heat (Q), work (W ) or total energychange ∆U can be set to 0. ∆U = 0 since U = U(T0)
3 Is it a shift away from thermal or mechanical equilibrium that initiates the change of state?Shift from mechanical equilibrium due to release of clamp.
4 If the change of state is initiated by a shift away from mechanical equilibrium, set up anequation for energy balance in terms of the change in volume (note name: isothermalexpansion). (If volume is not directly given to you, use the state equation to get it.)
∆U = Q + W
∆U = Q −∫ V2
V1
P(V ,T ) dV
5 Use a) the equation for heat capacity and b) the equation of state to simplify the energybalance equation. Heat capacity: ∆U = NCv ×∆T; Equation of state:P(V,T) = NRT0/V
6 Set terms in the energy balance to 0 based on the constraints identified above. ∆T = 0implies ∆U = 0
7 Solve the equations for the Q,W and ∆U if a state variable change is specified.W = −NRT0 ln(V2/V1); ∆U = 0; Q = −W.
![Page 136: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/136.jpg)
Steps in setting up heat and work calculations: isothermal expansion ofideal gas
1 What is the constraint? T = T0
2 Based on the answer to 1), determine whether the heat (Q), work (W ) or total energychange ∆U can be set to 0. ∆U = 0 since U = U(T0)
3 Is it a shift away from thermal or mechanical equilibrium that initiates the change of state?Shift from mechanical equilibrium due to release of clamp.
4 If the change of state is initiated by a shift away from mechanical equilibrium, set up anequation for energy balance in terms of the change in volume (note name: isothermalexpansion). (If volume is not directly given to you, use the state equation to get it.)
∆U = Q + W
∆U = Q −∫ V2
V1
P(V ,T ) dV
5 Use a) the equation for heat capacity and b) the equation of state to simplify the energybalance equation. Heat capacity: ∆U = NCv ×∆T; Equation of state:P(V,T) = NRT0/V
6 Set terms in the energy balance to 0 based on the constraints identified above. ∆T = 0implies ∆U = 0
7 Solve the equations for the Q,W and ∆U if a state variable change is specified.W = −NRT0 ln(V2/V1); ∆U = 0; Q = −W.
![Page 137: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/137.jpg)
Steps in setting up heat and work calculations: isothermal expansion ofideal gas
1 What is the constraint? T = T0
2 Based on the answer to 1), determine whether the heat (Q), work (W ) or total energychange ∆U can be set to 0. ∆U = 0 since U = U(T0)
3 Is it a shift away from thermal or mechanical equilibrium that initiates the change of state?Shift from mechanical equilibrium due to release of clamp.
4 If the change of state is initiated by a shift away from mechanical equilibrium, set up anequation for energy balance in terms of the change in volume (note name: isothermalexpansion). (If volume is not directly given to you, use the state equation to get it.)
∆U = Q + W
∆U = Q −∫ V2
V1
P(V ,T ) dV
5 Use a) the equation for heat capacity and b) the equation of state to simplify the energybalance equation. Heat capacity: ∆U = NCv ×∆T; Equation of state:P(V,T) = NRT0/V
6 Set terms in the energy balance to 0 based on the constraints identified above. ∆T = 0implies ∆U = 0
7 Solve the equations for the Q,W and ∆U if a state variable change is specified.W = −NRT0 ln(V2/V1); ∆U = 0; Q = −W.
![Page 138: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/138.jpg)
Steps in setting up heat and work calculations: isothermal expansion ofideal gas
1 What is the constraint? T = T0
2 Based on the answer to 1), determine whether the heat (Q), work (W ) or total energychange ∆U can be set to 0. ∆U = 0 since U = U(T0)
3 Is it a shift away from thermal or mechanical equilibrium that initiates the change of state?Shift from mechanical equilibrium due to release of clamp.
4 If the change of state is initiated by a shift away from mechanical equilibrium, set up anequation for energy balance in terms of the change in volume (note name: isothermalexpansion). (If volume is not directly given to you, use the state equation to get it.)
∆U = Q + W
∆U = Q −∫ V2
V1
P(V ,T ) dV
5 Use a) the equation for heat capacity and b) the equation of state to simplify the energybalance equation. Heat capacity: ∆U = NCv ×∆T; Equation of state:P(V,T) = NRT0/V
6 Set terms in the energy balance to 0 based on the constraints identified above. ∆T = 0implies ∆U = 0
7 Solve the equations for the Q,W and ∆U if a state variable change is specified.W = −NRT0 ln(V2/V1); ∆U = 0; Q = −W.
![Page 139: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/139.jpg)
Steps in setting up heat and work calculations for ideal gas processes
1 What is the constraint?
2 Based on the answer to 1), determine whether the heat (Q), work (W ) or total energychange ∆U can be set to 0. For example, Q = 0 for an adiabatic process, W = 0 for aconstant V process, and ∆U = 0 for a constant T process for an ideal gas.
3 Based on the answer to 3), is it a shift away from thermal or mechanical equilibrium thatinitiates the change of state?
4 If the change of state is initiated by a shift away from mechanical equilibrium, set up anequation for energy balance in terms of the change in volume. (If volume is not directlygiven to you, use the state equation to get it.)
5 Use a) the equation for heat capacity and b) the equation of state to simplify the energybalance equation
6 Set terms in the energy balance to 0 based on the constraints identified above.
7 Solve the equations for the Q,W and ∆U (if a state variable change is specified) or for thestate variable change (if an energy change is specified).
![Page 140: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/140.jpg)
Steps in setting up heat and work calculations for ideal gas processes
1 What is the constraint?
2 Based on the answer to 1), determine whether the heat (Q), work (W ) or total energychange ∆U can be set to 0. For example, Q = 0 for an adiabatic process, W = 0 for aconstant V process, and ∆U = 0 for a constant T process for an ideal gas.
3 Based on the answer to 3), is it a shift away from thermal or mechanical equilibrium thatinitiates the change of state?
4 If the change of state is initiated by a shift away from mechanical equilibrium, set up anequation for energy balance in terms of the change in volume. (If volume is not directlygiven to you, use the state equation to get it.)
5 Use a) the equation for heat capacity and b) the equation of state to simplify the energybalance equation
6 Set terms in the energy balance to 0 based on the constraints identified above.
7 Solve the equations for the Q,W and ∆U (if a state variable change is specified) or for thestate variable change (if an energy change is specified).
![Page 141: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/141.jpg)
Steps in setting up heat and work calculations for ideal gas processes
1 What is the constraint?
2 Based on the answer to 1), determine whether the heat (Q), work (W ) or total energychange ∆U can be set to 0. For example, Q = 0 for an adiabatic process, W = 0 for aconstant V process, and ∆U = 0 for a constant T process for an ideal gas.
3 Based on the answer to 3), is it a shift away from thermal or mechanical equilibrium thatinitiates the change of state?
4 If the change of state is initiated by a shift away from mechanical equilibrium, set up anequation for energy balance in terms of the change in volume. (If volume is not directlygiven to you, use the state equation to get it.)
5 Use a) the equation for heat capacity and b) the equation of state to simplify the energybalance equation
6 Set terms in the energy balance to 0 based on the constraints identified above.
7 Solve the equations for the Q,W and ∆U (if a state variable change is specified) or for thestate variable change (if an energy change is specified).
![Page 142: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/142.jpg)
Steps in setting up heat and work calculations for ideal gas processes
1 What is the constraint?
2 Based on the answer to 1), determine whether the heat (Q), work (W ) or total energychange ∆U can be set to 0. For example, Q = 0 for an adiabatic process, W = 0 for aconstant V process, and ∆U = 0 for a constant T process for an ideal gas.
3 Based on the answer to 3), is it a shift away from thermal or mechanical equilibrium thatinitiates the change of state?
4 If the change of state is initiated by a shift away from mechanical equilibrium, set up anequation for energy balance in terms of the change in volume. (If volume is not directlygiven to you, use the state equation to get it.)
5 Use a) the equation for heat capacity and b) the equation of state to simplify the energybalance equation
6 Set terms in the energy balance to 0 based on the constraints identified above.
7 Solve the equations for the Q,W and ∆U (if a state variable change is specified) or for thestate variable change (if an energy change is specified).
![Page 143: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/143.jpg)
Steps in setting up heat and work calculations for ideal gas processes
1 What is the constraint?
2 Based on the answer to 1), determine whether the heat (Q), work (W ) or total energychange ∆U can be set to 0. For example, Q = 0 for an adiabatic process, W = 0 for aconstant V process, and ∆U = 0 for a constant T process for an ideal gas.
3 Based on the answer to 3), is it a shift away from thermal or mechanical equilibrium thatinitiates the change of state?
4 If the change of state is initiated by a shift away from mechanical equilibrium, set up anequation for energy balance in terms of the change in volume. (If volume is not directlygiven to you, use the state equation to get it.)
5 Use a) the equation for heat capacity and b) the equation of state to simplify the energybalance equation
6 Set terms in the energy balance to 0 based on the constraints identified above.
7 Solve the equations for the Q,W and ∆U (if a state variable change is specified) or for thestate variable change (if an energy change is specified).
![Page 144: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/144.jpg)
Steps in setting up heat and work calculations for ideal gas processes
1 What is the constraint?
2 Based on the answer to 1), determine whether the heat (Q), work (W ) or total energychange ∆U can be set to 0. For example, Q = 0 for an adiabatic process, W = 0 for aconstant V process, and ∆U = 0 for a constant T process for an ideal gas.
3 Based on the answer to 3), is it a shift away from thermal or mechanical equilibrium thatinitiates the change of state?
4 If the change of state is initiated by a shift away from mechanical equilibrium, set up anequation for energy balance in terms of the change in volume. (If volume is not directlygiven to you, use the state equation to get it.)
5 Use a) the equation for heat capacity and b) the equation of state to simplify the energybalance equation
6 Set terms in the energy balance to 0 based on the constraints identified above.
7 Solve the equations for the Q,W and ∆U (if a state variable change is specified) or for thestate variable change (if an energy change is specified).
![Page 145: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/145.jpg)
Steps in setting up heat and work calculations for ideal gas processes
1 What is the constraint?
2 Based on the answer to 1), determine whether the heat (Q), work (W ) or total energychange ∆U can be set to 0. For example, Q = 0 for an adiabatic process, W = 0 for aconstant V process, and ∆U = 0 for a constant T process for an ideal gas.
3 Based on the answer to 3), is it a shift away from thermal or mechanical equilibrium thatinitiates the change of state?
4 If the change of state is initiated by a shift away from mechanical equilibrium, set up anequation for energy balance in terms of the change in volume. (If volume is not directlygiven to you, use the state equation to get it.)
5 Use a) the equation for heat capacity and b) the equation of state to simplify the energybalance equation
6 Set terms in the energy balance to 0 based on the constraints identified above.
7 Solve the equations for the Q,W and ∆U (if a state variable change is specified) or for thestate variable change (if an energy change is specified).
![Page 146: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/146.jpg)
Example: Isobaric heating (physical picture)
Now consider gas inside a cylinder with piston where the pressure P is equal to that of itssurroundings (mechanical equilibrium). The pressure imposed by the surroundings (by aweight on top of the piston) is P0. The gas is initially at temperature T1.
The cylinder is placed on a hot plate (or immersed in a bath) at temperature T2. The gasproceeds to thermally equilibrate with the hot plate. At every step of this process, thevolume V of the gas increases due to the increase in T at constant pressure P0.
![Page 147: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/147.jpg)
Example: Isobaric heating (physical picture)
Now consider gas inside a cylinder with piston where the pressure P is equal to that of itssurroundings (mechanical equilibrium). The pressure imposed by the surroundings (by aweight on top of the piston) is P0. The gas is initially at temperature T1.
The cylinder is placed on a hot plate (or immersed in a bath) at temperature T2. The gasproceeds to thermally equilibrate with the hot plate. At every step of this process, thevolume V of the gas increases due to the increase in T at constant pressure P0.
![Page 148: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/148.jpg)
Example: Isobaric heating (physical picture)
![Page 149: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/149.jpg)
Compute a) the work W , b) the heat Q, and c) the change in total energy ∆U for thisprocess.
Energy balance: as the gas is heated, ∆U increases since U = U(T ) for the gas. However,unlike the isovolumetric case, work is done during the free expansion. So both Q and W arenonzero.
We can solve for W in terms of the equation for work together with the state equation, andwe can solve for ∆U using the heat capacity equation. Both should be expressed in terms ofthe given T1,T2. Once we have found these two, we can use the energy balance equation tosolve for Q.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 54 / 196
![Page 150: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/150.jpg)
Compute a) the work W , b) the heat Q, and c) the change in total energy ∆U for thisprocess.
Energy balance: as the gas is heated, ∆U increases since U = U(T ) for the gas. However,unlike the isovolumetric case, work is done during the free expansion. So both Q and W arenonzero.
We can solve for W in terms of the equation for work together with the state equation, andwe can solve for ∆U using the heat capacity equation. Both should be expressed in terms ofthe given T1,T2. Once we have found these two, we can use the energy balance equation tosolve for Q.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 54 / 196
![Page 151: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/151.jpg)
Compute a) the work W , b) the heat Q, and c) the change in total energy ∆U for thisprocess.
Energy balance: as the gas is heated, ∆U increases since U = U(T ) for the gas. However,unlike the isovolumetric case, work is done during the free expansion. So both Q and W arenonzero.
We can solve for W in terms of the equation for work together with the state equation, andwe can solve for ∆U using the heat capacity equation. Both should be expressed in terms ofthe given T1,T2. Once we have found these two, we can use the energy balance equation tosolve for Q.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 54 / 196
![Page 152: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/152.jpg)
Steps in setting up heat and work calculations applied to isobaric heating ofideal gas
1 What is the constraint? P = P0
2 Based on the answer to 1), determine whether the heat (Q), work (W ) or total energychange ∆U can be set to 0. none apply
3 Based on the answer to 3), is it a shift away from thermal or mechanical equilibrium thatinitiates the change of state? Shift from thermal equilibrium due to introduction of heat.
4 If the change of state is initiated by a shift away from thermal equilibrium, set up anequation for energy balance in terms of the change in temperature (note name: isobaricheating). (If temperature is not directly given to you, use the state variables provided to getit.) Use a) the equation for heat capacity and b) the equation of state to simplify the energybalance equation.
∆U = Q + W
∆U = Q −∫ V2
V1
P dV
∆U = Q − P0
∫ V2
V1
dV
Heat capacity: ∆U = NCv∆T; From equation of state: dV = (NRdT)/P0. Hence:
NCv∆T = Q−∫ T2
T1NR dT = Q−NR∆T (see below)
5 Set terms in the energy balance to 0 based on the constraints identified above. none
6 Solve the equations for the Q,W and ∆U if a state variable change is specified.W = −NR∆T; ∆U = NCv∆T; Q = ∆U−W = N(Cv + R)∆T.
![Page 153: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/153.jpg)
Steps in setting up heat and work calculations applied to isobaric heating ofideal gas
1 What is the constraint? P = P0
2 Based on the answer to 1), determine whether the heat (Q), work (W ) or total energychange ∆U can be set to 0. none apply
3 Based on the answer to 3), is it a shift away from thermal or mechanical equilibrium thatinitiates the change of state? Shift from thermal equilibrium due to introduction of heat.
4 If the change of state is initiated by a shift away from thermal equilibrium, set up anequation for energy balance in terms of the change in temperature (note name: isobaricheating). (If temperature is not directly given to you, use the state variables provided to getit.) Use a) the equation for heat capacity and b) the equation of state to simplify the energybalance equation.
∆U = Q + W
∆U = Q −∫ V2
V1
P dV
∆U = Q − P0
∫ V2
V1
dV
Heat capacity: ∆U = NCv∆T; From equation of state: dV = (NRdT)/P0. Hence:
NCv∆T = Q−∫ T2
T1NR dT = Q−NR∆T (see below)
5 Set terms in the energy balance to 0 based on the constraints identified above. none
6 Solve the equations for the Q,W and ∆U if a state variable change is specified.W = −NR∆T; ∆U = NCv∆T; Q = ∆U−W = N(Cv + R)∆T.
![Page 154: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/154.jpg)
Steps in setting up heat and work calculations applied to isobaric heating ofideal gas
1 What is the constraint? P = P0
2 Based on the answer to 1), determine whether the heat (Q), work (W ) or total energychange ∆U can be set to 0. none apply
3 Based on the answer to 3), is it a shift away from thermal or mechanical equilibrium thatinitiates the change of state? Shift from thermal equilibrium due to introduction of heat.
4 If the change of state is initiated by a shift away from thermal equilibrium, set up anequation for energy balance in terms of the change in temperature (note name: isobaricheating). (If temperature is not directly given to you, use the state variables provided to getit.) Use a) the equation for heat capacity and b) the equation of state to simplify the energybalance equation.
∆U = Q + W
∆U = Q −∫ V2
V1
P dV
∆U = Q − P0
∫ V2
V1
dV
Heat capacity: ∆U = NCv∆T; From equation of state: dV = (NRdT)/P0. Hence:
NCv∆T = Q−∫ T2
T1NR dT = Q−NR∆T (see below)
5 Set terms in the energy balance to 0 based on the constraints identified above. none
6 Solve the equations for the Q,W and ∆U if a state variable change is specified.W = −NR∆T; ∆U = NCv∆T; Q = ∆U−W = N(Cv + R)∆T.
![Page 155: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/155.jpg)
Steps in setting up heat and work calculations applied to isobaric heating ofideal gas
1 What is the constraint? P = P0
2 Based on the answer to 1), determine whether the heat (Q), work (W ) or total energychange ∆U can be set to 0. none apply
3 Based on the answer to 3), is it a shift away from thermal or mechanical equilibrium thatinitiates the change of state? Shift from thermal equilibrium due to introduction of heat.
4 If the change of state is initiated by a shift away from thermal equilibrium, set up anequation for energy balance in terms of the change in temperature (note name: isobaricheating). (If temperature is not directly given to you, use the state variables provided to getit.) Use a) the equation for heat capacity and b) the equation of state to simplify the energybalance equation.
∆U = Q + W
∆U = Q −∫ V2
V1
P dV
∆U = Q − P0
∫ V2
V1
dV
Heat capacity: ∆U = NCv∆T; From equation of state: dV = (NRdT)/P0. Hence:
NCv∆T = Q−∫ T2
T1NR dT = Q−NR∆T (see below)
5 Set terms in the energy balance to 0 based on the constraints identified above. none
6 Solve the equations for the Q,W and ∆U if a state variable change is specified.W = −NR∆T; ∆U = NCv∆T; Q = ∆U−W = N(Cv + R)∆T.
![Page 156: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/156.jpg)
Steps in setting up heat and work calculations applied to isobaric heating ofideal gas
1 What is the constraint? P = P0
2 Based on the answer to 1), determine whether the heat (Q), work (W ) or total energychange ∆U can be set to 0. none apply
3 Based on the answer to 3), is it a shift away from thermal or mechanical equilibrium thatinitiates the change of state? Shift from thermal equilibrium due to introduction of heat.
4 If the change of state is initiated by a shift away from thermal equilibrium, set up anequation for energy balance in terms of the change in temperature (note name: isobaricheating). (If temperature is not directly given to you, use the state variables provided to getit.) Use a) the equation for heat capacity and b) the equation of state to simplify the energybalance equation.
∆U = Q + W
∆U = Q −∫ V2
V1
P dV
∆U = Q − P0
∫ V2
V1
dV
Heat capacity: ∆U = NCv∆T; From equation of state: dV = (NRdT)/P0. Hence:
NCv∆T = Q−∫ T2
T1NR dT = Q−NR∆T (see below)
5 Set terms in the energy balance to 0 based on the constraints identified above. none
6 Solve the equations for the Q,W and ∆U if a state variable change is specified.W = −NR∆T; ∆U = NCv∆T; Q = ∆U−W = N(Cv + R)∆T.
![Page 157: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/157.jpg)
Steps in setting up heat and work calculations applied to isobaric heating ofideal gas
1 What is the constraint? P = P0
2 Based on the answer to 1), determine whether the heat (Q), work (W ) or total energychange ∆U can be set to 0. none apply
3 Based on the answer to 3), is it a shift away from thermal or mechanical equilibrium thatinitiates the change of state? Shift from thermal equilibrium due to introduction of heat.
4 If the change of state is initiated by a shift away from thermal equilibrium, set up anequation for energy balance in terms of the change in temperature (note name: isobaricheating). (If temperature is not directly given to you, use the state variables provided to getit.) Use a) the equation for heat capacity and b) the equation of state to simplify the energybalance equation.
∆U = Q + W
∆U = Q −∫ V2
V1
P dV
∆U = Q − P0
∫ V2
V1
dV
Heat capacity: ∆U = NCv∆T; From equation of state: dV = (NRdT)/P0. Hence:
NCv∆T = Q−∫ T2
T1NR dT = Q−NR∆T (see below)
5 Set terms in the energy balance to 0 based on the constraints identified above. none
6 Solve the equations for the Q,W and ∆U if a state variable change is specified.W = −NR∆T; ∆U = NCv∆T; Q = ∆U−W = N(Cv + R)∆T.
![Page 158: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/158.jpg)
Isobaric process: constraint is P = P0 fixed; P,V variable; P = P(V ,T0). How much heatQ is required to produce a given change in temperature ∆T = T2 − T1?
Need to compensate for the work done by an additional infusion of heat:
Q = ∆U −W = N
∫ T2
T1
CV (T ) dT −W
= N
∫ T2
T1
CV (T ) dT +
∫ V (T2)
V (T1)P dV
= N
∫ T2
T1
CV (T ) dT + P0
∫ V (T2)
V (T1)dV
= N
∫ T2
T1
CV (T ) dT + P0V2 − P0V1
= N
∫ T2
T1
CV (T ) dT + P0(NRT2/P0)− P0(NRT1/P0)
= N
∫ T2
T1
CV (T ) dT + NR(T2 − T1)
= N
∫ T2
T1
CV (T ) + R dT
where we have applied the equation of state to rewrite the second term since we areexplicitly specifying the change of T not V in the problem.Ultimately you want to be ableto recognize the type of process given its description in words and apply the appropriateequations without going through all the steps in the derivations above.Note that if CV is a constant, Q = N(CV + R)∆T . CP = CV + R is called the constantpressure heat capacity.
![Page 159: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/159.jpg)
Isobaric process: constraint is P = P0 fixed; P,V variable; P = P(V ,T0). How much heatQ is required to produce a given change in temperature ∆T = T2 − T1?
Need to compensate for the work done by an additional infusion of heat:
Q = ∆U −W = N
∫ T2
T1
CV (T ) dT −W
= N
∫ T2
T1
CV (T ) dT +
∫ V (T2)
V (T1)P dV
= N
∫ T2
T1
CV (T ) dT + P0
∫ V (T2)
V (T1)dV
= N
∫ T2
T1
CV (T ) dT + P0V2 − P0V1
= N
∫ T2
T1
CV (T ) dT + P0(NRT2/P0)− P0(NRT1/P0)
= N
∫ T2
T1
CV (T ) dT + NR(T2 − T1)
= N
∫ T2
T1
CV (T ) + R dT
where we have applied the equation of state to rewrite the second term since we areexplicitly specifying the change of T not V in the problem.Ultimately you want to be ableto recognize the type of process given its description in words and apply the appropriateequations without going through all the steps in the derivations above.
Note that if CV is a constant, Q = N(CV + R)∆T . CP = CV + R is called the constantpressure heat capacity.
![Page 160: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/160.jpg)
Isobaric process: constraint is P = P0 fixed; P,V variable; P = P(V ,T0). How much heatQ is required to produce a given change in temperature ∆T = T2 − T1?
Need to compensate for the work done by an additional infusion of heat:
Q = ∆U −W = N
∫ T2
T1
CV (T ) dT −W
= N
∫ T2
T1
CV (T ) dT +
∫ V (T2)
V (T1)P dV
= N
∫ T2
T1
CV (T ) dT + P0
∫ V (T2)
V (T1)dV
= N
∫ T2
T1
CV (T ) dT + P0V2 − P0V1
= N
∫ T2
T1
CV (T ) dT + P0(NRT2/P0)− P0(NRT1/P0)
= N
∫ T2
T1
CV (T ) dT + NR(T2 − T1)
= N
∫ T2
T1
CV (T ) + R dT
where we have applied the equation of state to rewrite the second term since we areexplicitly specifying the change of T not V in the problem.Ultimately you want to be ableto recognize the type of process given its description in words and apply the appropriateequations without going through all the steps in the derivations above.Note that if CV is a constant, Q = N(CV + R)∆T . CP = CV + R is called the constantpressure heat capacity.
![Page 161: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/161.jpg)
Steps in setting up heat and work calculations applied to isobaric heating ofideal gas
1 What is the constraint?
2 Based on the answer to 1), determine whether the heat (Q), work (W ) or total energychange ∆U can be set to 0.
3 Based on the answer to 3), is it a shift away from thermal or mechanical equilibrium thatinitiates the change of state?
4 If the change of state is initiated by a shift away from thermal equilibrium, set up anequation for energy balance in terms of the change in temperature Use a) the equation forheat capacity and b) the equation of state to simplify the energy balance equation.
5 Set terms in the energy balance to 0 based on the constraints identified above.
6 Solve the equations for the Q,W and ∆U if a state variable change is specified.
![Page 162: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/162.jpg)
Steps in setting up heat and work calculations applied to isobaric heating ofideal gas
1 What is the constraint?
2 Based on the answer to 1), determine whether the heat (Q), work (W ) or total energychange ∆U can be set to 0.
3 Based on the answer to 3), is it a shift away from thermal or mechanical equilibrium thatinitiates the change of state?
4 If the change of state is initiated by a shift away from thermal equilibrium, set up anequation for energy balance in terms of the change in temperature Use a) the equation forheat capacity and b) the equation of state to simplify the energy balance equation.
5 Set terms in the energy balance to 0 based on the constraints identified above.
6 Solve the equations for the Q,W and ∆U if a state variable change is specified.
![Page 163: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/163.jpg)
Steps in setting up heat and work calculations applied to isobaric heating ofideal gas
1 What is the constraint?
2 Based on the answer to 1), determine whether the heat (Q), work (W ) or total energychange ∆U can be set to 0.
3 Based on the answer to 3), is it a shift away from thermal or mechanical equilibrium thatinitiates the change of state?
4 If the change of state is initiated by a shift away from thermal equilibrium, set up anequation for energy balance in terms of the change in temperature Use a) the equation forheat capacity and b) the equation of state to simplify the energy balance equation.
5 Set terms in the energy balance to 0 based on the constraints identified above.
6 Solve the equations for the Q,W and ∆U if a state variable change is specified.
![Page 164: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/164.jpg)
Steps in setting up heat and work calculations applied to isobaric heating ofideal gas
1 What is the constraint?
2 Based on the answer to 1), determine whether the heat (Q), work (W ) or total energychange ∆U can be set to 0.
3 Based on the answer to 3), is it a shift away from thermal or mechanical equilibrium thatinitiates the change of state?
4 If the change of state is initiated by a shift away from thermal equilibrium, set up anequation for energy balance in terms of the change in temperature Use a) the equation forheat capacity and b) the equation of state to simplify the energy balance equation.
5 Set terms in the energy balance to 0 based on the constraints identified above.
6 Solve the equations for the Q,W and ∆U if a state variable change is specified.
![Page 165: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/165.jpg)
Steps in setting up heat and work calculations applied to isobaric heating ofideal gas
1 What is the constraint?
2 Based on the answer to 1), determine whether the heat (Q), work (W ) or total energychange ∆U can be set to 0.
3 Based on the answer to 3), is it a shift away from thermal or mechanical equilibrium thatinitiates the change of state?
4 If the change of state is initiated by a shift away from thermal equilibrium, set up anequation for energy balance in terms of the change in temperature Use a) the equation forheat capacity and b) the equation of state to simplify the energy balance equation.
5 Set terms in the energy balance to 0 based on the constraints identified above.
6 Solve the equations for the Q,W and ∆U if a state variable change is specified.
![Page 166: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/166.jpg)
Steps in setting up heat and work calculations applied to isobaric heating ofideal gas
1 What is the constraint?
2 Based on the answer to 1), determine whether the heat (Q), work (W ) or total energychange ∆U can be set to 0.
3 Based on the answer to 3), is it a shift away from thermal or mechanical equilibrium thatinitiates the change of state?
4 If the change of state is initiated by a shift away from thermal equilibrium, set up anequation for energy balance in terms of the change in temperature Use a) the equation forheat capacity and b) the equation of state to simplify the energy balance equation.
5 Set terms in the energy balance to 0 based on the constraints identified above.
6 Solve the equations for the Q,W and ∆U if a state variable change is specified.
![Page 167: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/167.jpg)
Steps in setting up heat and work calculations applied to isovolumetricheating of ideal gas (revisited)
1 What is the constraint? V = V0
2 Based on the answer to 1), determine whether the heat (Q), work (W ) or total energychange ∆U can be set to 0. W = 0 since V = V0
3 Based on the answer to 3), is it a shift away from thermal or mechanical equilibrium thatinitiates the change of state? Shift from thermal equilibrium due to introduction of heater.
4 If the change of state is initiated by a shift away from thermal equilibrium, set up anequation for energy balance in terms of the change in temperature. (If temperature is notdirectly given to you, use the state equation to get it).
∆U = Q + W
5 Use a) the equation for heat capacity to simplify the energy balance equation. No need forequation of state. Heat capacity: ∆U = NCv ×∆T, so
NCv ×∆T = Q + W
6 Set terms in the energy balance to 0 based on the constraints identified above. ∆V = 0implies W = 0
7 Solve the equations for the Q,W and ∆U if a state variable change is specified.∆U = NCv ×∆T; Q = NCv ×∆T; W = 0.
![Page 168: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/168.jpg)
Steps in setting up heat and work calculations applied to isovolumetricheating of ideal gas (revisited)
1 What is the constraint? V = V0
2 Based on the answer to 1), determine whether the heat (Q), work (W ) or total energychange ∆U can be set to 0. W = 0 since V = V0
3 Based on the answer to 3), is it a shift away from thermal or mechanical equilibrium thatinitiates the change of state? Shift from thermal equilibrium due to introduction of heater.
4 If the change of state is initiated by a shift away from thermal equilibrium, set up anequation for energy balance in terms of the change in temperature. (If temperature is notdirectly given to you, use the state equation to get it).
∆U = Q + W
5 Use a) the equation for heat capacity to simplify the energy balance equation. No need forequation of state. Heat capacity: ∆U = NCv ×∆T, so
NCv ×∆T = Q + W
6 Set terms in the energy balance to 0 based on the constraints identified above. ∆V = 0implies W = 0
7 Solve the equations for the Q,W and ∆U if a state variable change is specified.∆U = NCv ×∆T; Q = NCv ×∆T; W = 0.
![Page 169: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/169.jpg)
Steps in setting up heat and work calculations applied to isovolumetricheating of ideal gas (revisited)
1 What is the constraint? V = V0
2 Based on the answer to 1), determine whether the heat (Q), work (W ) or total energychange ∆U can be set to 0. W = 0 since V = V0
3 Based on the answer to 3), is it a shift away from thermal or mechanical equilibrium thatinitiates the change of state? Shift from thermal equilibrium due to introduction of heater.
4 If the change of state is initiated by a shift away from thermal equilibrium, set up anequation for energy balance in terms of the change in temperature. (If temperature is notdirectly given to you, use the state equation to get it).
∆U = Q + W
5 Use a) the equation for heat capacity to simplify the energy balance equation. No need forequation of state. Heat capacity: ∆U = NCv ×∆T, so
NCv ×∆T = Q + W
6 Set terms in the energy balance to 0 based on the constraints identified above. ∆V = 0implies W = 0
7 Solve the equations for the Q,W and ∆U if a state variable change is specified.∆U = NCv ×∆T; Q = NCv ×∆T; W = 0.
![Page 170: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/170.jpg)
Steps in setting up heat and work calculations applied to isovolumetricheating of ideal gas (revisited)
1 What is the constraint? V = V0
2 Based on the answer to 1), determine whether the heat (Q), work (W ) or total energychange ∆U can be set to 0. W = 0 since V = V0
3 Based on the answer to 3), is it a shift away from thermal or mechanical equilibrium thatinitiates the change of state? Shift from thermal equilibrium due to introduction of heater.
4 If the change of state is initiated by a shift away from thermal equilibrium, set up anequation for energy balance in terms of the change in temperature. (If temperature is notdirectly given to you, use the state equation to get it).
∆U = Q + W
5 Use a) the equation for heat capacity to simplify the energy balance equation. No need forequation of state. Heat capacity: ∆U = NCv ×∆T, so
NCv ×∆T = Q + W
6 Set terms in the energy balance to 0 based on the constraints identified above. ∆V = 0implies W = 0
7 Solve the equations for the Q,W and ∆U if a state variable change is specified.∆U = NCv ×∆T; Q = NCv ×∆T; W = 0.
![Page 171: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/171.jpg)
Steps in setting up heat and work calculations applied to isovolumetricheating of ideal gas (revisited)
1 What is the constraint? V = V0
2 Based on the answer to 1), determine whether the heat (Q), work (W ) or total energychange ∆U can be set to 0. W = 0 since V = V0
3 Based on the answer to 3), is it a shift away from thermal or mechanical equilibrium thatinitiates the change of state? Shift from thermal equilibrium due to introduction of heater.
4 If the change of state is initiated by a shift away from thermal equilibrium, set up anequation for energy balance in terms of the change in temperature. (If temperature is notdirectly given to you, use the state equation to get it).
∆U = Q + W
5 Use a) the equation for heat capacity to simplify the energy balance equation. No need forequation of state. Heat capacity: ∆U = NCv ×∆T, so
NCv ×∆T = Q + W
6 Set terms in the energy balance to 0 based on the constraints identified above. ∆V = 0implies W = 0
7 Solve the equations for the Q,W and ∆U if a state variable change is specified.∆U = NCv ×∆T; Q = NCv ×∆T; W = 0.
![Page 172: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/172.jpg)
Steps in setting up heat and work calculations applied to isovolumetricheating of ideal gas (revisited)
1 What is the constraint? V = V0
2 Based on the answer to 1), determine whether the heat (Q), work (W ) or total energychange ∆U can be set to 0. W = 0 since V = V0
3 Based on the answer to 3), is it a shift away from thermal or mechanical equilibrium thatinitiates the change of state? Shift from thermal equilibrium due to introduction of heater.
4 If the change of state is initiated by a shift away from thermal equilibrium, set up anequation for energy balance in terms of the change in temperature. (If temperature is notdirectly given to you, use the state equation to get it).
∆U = Q + W
5 Use a) the equation for heat capacity to simplify the energy balance equation. No need forequation of state. Heat capacity: ∆U = NCv ×∆T, so
NCv ×∆T = Q + W
6 Set terms in the energy balance to 0 based on the constraints identified above. ∆V = 0implies W = 0
7 Solve the equations for the Q,W and ∆U if a state variable change is specified.∆U = NCv ×∆T; Q = NCv ×∆T; W = 0.
![Page 173: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/173.jpg)
Steps in setting up heat and work calculations applied to isovolumetricheating of ideal gas (revisited)
1 What is the constraint? V = V0
2 Based on the answer to 1), determine whether the heat (Q), work (W ) or total energychange ∆U can be set to 0. W = 0 since V = V0
3 Based on the answer to 3), is it a shift away from thermal or mechanical equilibrium thatinitiates the change of state? Shift from thermal equilibrium due to introduction of heater.
4 If the change of state is initiated by a shift away from thermal equilibrium, set up anequation for energy balance in terms of the change in temperature. (If temperature is notdirectly given to you, use the state equation to get it).
∆U = Q + W
5 Use a) the equation for heat capacity to simplify the energy balance equation. No need forequation of state. Heat capacity: ∆U = NCv ×∆T, so
NCv ×∆T = Q + W
6 Set terms in the energy balance to 0 based on the constraints identified above. ∆V = 0implies W = 0
7 Solve the equations for the Q,W and ∆U if a state variable change is specified.∆U = NCv ×∆T; Q = NCv ×∆T; W = 0.
![Page 174: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/174.jpg)
Additional comments on setting up heat and work calculations
Note that in the examples above I have sometimes indicated P,T for a system, sometimesindicated P,V for a system, and sometimes indicated V ,T for a system. Of course, applythe state equation to take the information given and convert it to a form that is necessary tosolve the problem.
Sometimes you may need to solve for the number of moles N.
Oftentimes, you can stop prior to setting up energy balance equation if you have alreadyidentified the type of process and remember the equations for heat, work and change inenergy for such a process.
Make sure to get signs right on expansions vs compressions, heatings vs coolings
Bear in mind that the equation N∫ T2
T1Cv (T )dT (or NCv ∆T for temperature-independent
heat capacity) gives us internal energy change ∆U
Q = NCv ∆T if the process occurs at constant volume.
Q = NCp∆T if the process occurs at constant pressure.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 59 / 196
![Page 175: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/175.jpg)
Additional comments on setting up heat and work calculations
Note that in the examples above I have sometimes indicated P,T for a system, sometimesindicated P,V for a system, and sometimes indicated V ,T for a system. Of course, applythe state equation to take the information given and convert it to a form that is necessary tosolve the problem.
Sometimes you may need to solve for the number of moles N.
Oftentimes, you can stop prior to setting up energy balance equation if you have alreadyidentified the type of process and remember the equations for heat, work and change inenergy for such a process.
Make sure to get signs right on expansions vs compressions, heatings vs coolings
Bear in mind that the equation N∫ T2
T1Cv (T )dT (or NCv ∆T for temperature-independent
heat capacity) gives us internal energy change ∆U
Q = NCv ∆T if the process occurs at constant volume.
Q = NCp∆T if the process occurs at constant pressure.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 59 / 196
![Page 176: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/176.jpg)
Additional comments on setting up heat and work calculations
Note that in the examples above I have sometimes indicated P,T for a system, sometimesindicated P,V for a system, and sometimes indicated V ,T for a system. Of course, applythe state equation to take the information given and convert it to a form that is necessary tosolve the problem.
Sometimes you may need to solve for the number of moles N.
Oftentimes, you can stop prior to setting up energy balance equation if you have alreadyidentified the type of process and remember the equations for heat, work and change inenergy for such a process.
Make sure to get signs right on expansions vs compressions, heatings vs coolings
Bear in mind that the equation N∫ T2
T1Cv (T )dT (or NCv ∆T for temperature-independent
heat capacity) gives us internal energy change ∆U
Q = NCv ∆T if the process occurs at constant volume.
Q = NCp∆T if the process occurs at constant pressure.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 59 / 196
![Page 177: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/177.jpg)
Additional comments on setting up heat and work calculations
Note that in the examples above I have sometimes indicated P,T for a system, sometimesindicated P,V for a system, and sometimes indicated V ,T for a system. Of course, applythe state equation to take the information given and convert it to a form that is necessary tosolve the problem.
Sometimes you may need to solve for the number of moles N.
Oftentimes, you can stop prior to setting up energy balance equation if you have alreadyidentified the type of process and remember the equations for heat, work and change inenergy for such a process.
Make sure to get signs right on expansions vs compressions, heatings vs coolings
Bear in mind that the equation N∫ T2
T1Cv (T )dT (or NCv ∆T for temperature-independent
heat capacity) gives us internal energy change ∆U
Q = NCv ∆T if the process occurs at constant volume.
Q = NCp∆T if the process occurs at constant pressure.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 59 / 196
![Page 178: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/178.jpg)
Additional comments on setting up heat and work calculations
Note that in the examples above I have sometimes indicated P,T for a system, sometimesindicated P,V for a system, and sometimes indicated V ,T for a system. Of course, applythe state equation to take the information given and convert it to a form that is necessary tosolve the problem.
Sometimes you may need to solve for the number of moles N.
Oftentimes, you can stop prior to setting up energy balance equation if you have alreadyidentified the type of process and remember the equations for heat, work and change inenergy for such a process.
Make sure to get signs right on expansions vs compressions, heatings vs coolings
Bear in mind that the equation N∫ T2
T1Cv (T )dT (or NCv ∆T for temperature-independent
heat capacity) gives us internal energy change ∆U
Q = NCv ∆T if the process occurs at constant volume.
Q = NCp∆T if the process occurs at constant pressure.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 59 / 196
![Page 179: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/179.jpg)
Additional comments on setting up heat and work calculations
Note that in the examples above I have sometimes indicated P,T for a system, sometimesindicated P,V for a system, and sometimes indicated V ,T for a system. Of course, applythe state equation to take the information given and convert it to a form that is necessary tosolve the problem.
Sometimes you may need to solve for the number of moles N.
Oftentimes, you can stop prior to setting up energy balance equation if you have alreadyidentified the type of process and remember the equations for heat, work and change inenergy for such a process.
Make sure to get signs right on expansions vs compressions, heatings vs coolings
Bear in mind that the equation N∫ T2
T1Cv (T )dT (or NCv ∆T for temperature-independent
heat capacity) gives us internal energy change ∆U
Q = NCv ∆T if the process occurs at constant volume.
Q = NCp∆T if the process occurs at constant pressure.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 59 / 196
![Page 180: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/180.jpg)
Additional comments on setting up heat and work calculations
Note that in the examples above I have sometimes indicated P,T for a system, sometimesindicated P,V for a system, and sometimes indicated V ,T for a system. Of course, applythe state equation to take the information given and convert it to a form that is necessary tosolve the problem.
Sometimes you may need to solve for the number of moles N.
Oftentimes, you can stop prior to setting up energy balance equation if you have alreadyidentified the type of process and remember the equations for heat, work and change inenergy for such a process.
Make sure to get signs right on expansions vs compressions, heatings vs coolings
Bear in mind that the equation N∫ T2
T1Cv (T )dT (or NCv ∆T for temperature-independent
heat capacity) gives us internal energy change ∆U
Q = NCv ∆T if the process occurs at constant volume.
Q = NCp∆T if the process occurs at constant pressure.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 59 / 196
![Page 181: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/181.jpg)
Example 1
Consider gas inside a cylinder with piston where the volume V1 is fixed by a clamp. Thepressure is P1, volume is V1, temperature is T1, and constant volume heat capacity is Cv .
In what way is the system isolated?
What is the number of moles of gas N?
The entire system is immersed in a large heat bath at temperature T2. What type ofthermodynamic process is this?
Draw a picture depicting the process and indicate the heat and work flows assumingT1 < T2, given the initial state shown in the picture.
![Page 182: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/182.jpg)
Example 1
Consider gas inside a cylinder with piston where the volume V1 is fixed by a clamp. Thepressure is P1, volume is V1, temperature is T1, and constant volume heat capacity is Cv .
In what way is the system isolated?
What is the number of moles of gas N?
The entire system is immersed in a large heat bath at temperature T2. What type ofthermodynamic process is this?
Draw a picture depicting the process and indicate the heat and work flows assumingT1 < T2, given the initial state shown in the picture.
![Page 183: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/183.jpg)
Example 1
Consider gas inside a cylinder with piston where the volume V1 is fixed by a clamp. Thepressure is P1, volume is V1, temperature is T1, and constant volume heat capacity is Cv .
In what way is the system isolated?
What is the number of moles of gas N?
The entire system is immersed in a large heat bath at temperature T2. What type ofthermodynamic process is this?
Draw a picture depicting the process and indicate the heat and work flows assumingT1 < T2, given the initial state shown in the picture.
![Page 184: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/184.jpg)
Example 1
Consider gas inside a cylinder with piston where the volume V1 is fixed by a clamp. Thepressure is P1, volume is V1, temperature is T1, and constant volume heat capacity is Cv .
In what way is the system isolated?
What is the number of moles of gas N?
The entire system is immersed in a large heat bath at temperature T2. What type ofthermodynamic process is this?
Draw a picture depicting the process and indicate the heat and work flows assumingT1 < T2, given the initial state shown in the picture.
![Page 185: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/185.jpg)
Example 1
Consider gas inside a cylinder with piston where the volume V1 is fixed by a clamp. Thepressure is P1, volume is V1, temperature is T1, and constant volume heat capacity is Cv .
In what way is the system isolated?
What is the number of moles of gas N?
The entire system is immersed in a large heat bath at temperature T2. What type ofthermodynamic process is this?
Draw a picture depicting the process and indicate the heat and work flows assumingT1 < T2, given the initial state shown in the picture.
![Page 186: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/186.jpg)
Example 1 (cont’d)
Write the energy balance equation in terms of the change in temperature.
How much energy in the form of heat Q is absorbed by the gas?
Now assume the heat absorbed by the gas was measured to be Q, but you did not measurethe temperature of of the bath. Determine what must have been the temperature of thebath.
What is the work done?
![Page 187: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/187.jpg)
Example 1 (cont’d)
Write the energy balance equation in terms of the change in temperature.
How much energy in the form of heat Q is absorbed by the gas?
Now assume the heat absorbed by the gas was measured to be Q, but you did not measurethe temperature of of the bath. Determine what must have been the temperature of thebath.
What is the work done?
![Page 188: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/188.jpg)
Example 1 (cont’d)
Write the energy balance equation in terms of the change in temperature.
How much energy in the form of heat Q is absorbed by the gas?
Now assume the heat absorbed by the gas was measured to be Q, but you did not measurethe temperature of of the bath. Determine what must have been the temperature of thebath.
What is the work done?
![Page 189: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/189.jpg)
Example 1 (cont’d)
Write the energy balance equation in terms of the change in temperature.
How much energy in the form of heat Q is absorbed by the gas?
Now assume the heat absorbed by the gas was measured to be Q, but you did not measurethe temperature of of the bath. Determine what must have been the temperature of thebath.
What is the work done?
![Page 190: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/190.jpg)
Example 1 answers
Consider gas inside a cylinder with piston where the volume V1 is fixed by a clamp. Thepressure is P1, volume is V1, temperature is T1, and constant volume heat capacity is Cv .
In what way is the system isolated?
What is the number of moles of gas N? N = PVRT
= P1V1RT1
.
The entire system is immersed in a large heat bath at temperature T2. What type ofthermodynamic process is this? isovolumetric heating
Draw a picture depicting the process and indicate the heat and work flows assumingT1 < T2, given the initial state shown in the picture.
![Page 191: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/191.jpg)
Example 1 answers
Consider gas inside a cylinder with piston where the volume V1 is fixed by a clamp. Thepressure is P1, volume is V1, temperature is T1, and constant volume heat capacity is Cv .
In what way is the system isolated?
What is the number of moles of gas N? N = PVRT
= P1V1RT1
.
The entire system is immersed in a large heat bath at temperature T2. What type ofthermodynamic process is this? isovolumetric heating
Draw a picture depicting the process and indicate the heat and work flows assumingT1 < T2, given the initial state shown in the picture.
![Page 192: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/192.jpg)
Example 1 answers
Consider gas inside a cylinder with piston where the volume V1 is fixed by a clamp. Thepressure is P1, volume is V1, temperature is T1, and constant volume heat capacity is Cv .
In what way is the system isolated?
What is the number of moles of gas N? N = PVRT
= P1V1RT1
.
The entire system is immersed in a large heat bath at temperature T2. What type ofthermodynamic process is this? isovolumetric heating
Draw a picture depicting the process and indicate the heat and work flows assumingT1 < T2, given the initial state shown in the picture.
![Page 193: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/193.jpg)
Example 1 answers
Consider gas inside a cylinder with piston where the volume V1 is fixed by a clamp. Thepressure is P1, volume is V1, temperature is T1, and constant volume heat capacity is Cv .
In what way is the system isolated?
What is the number of moles of gas N? N = PVRT
= P1V1RT1
.
The entire system is immersed in a large heat bath at temperature T2. What type ofthermodynamic process is this? isovolumetric heating
Draw a picture depicting the process and indicate the heat and work flows assumingT1 < T2, given the initial state shown in the picture.
![Page 194: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/194.jpg)
Example 1 answers
Consider gas inside a cylinder with piston where the volume V1 is fixed by a clamp. Thepressure is P1, volume is V1, temperature is T1, and constant volume heat capacity is Cv .
In what way is the system isolated?
What is the number of moles of gas N? N = PVRT
= P1V1RT1
.
The entire system is immersed in a large heat bath at temperature T2. What type ofthermodynamic process is this? isovolumetric heating
Draw a picture depicting the process and indicate the heat and work flows assumingT1 < T2, given the initial state shown in the picture.
![Page 195: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/195.jpg)
Example 1 answers (cont’d)
Write the energy balance equation in terms of the change in temperature.
∆U = Q + W
NCv ∆T = Q
How much energy in the form of heat Q is absorbed by the gas? See above.
Now assume the heat absorbed by the gas was measured to be Q, but you did not measurethe temperature of of the bath. Determine what must have been the temperature of thebath. ∆T = Q
NCvwith N, Cv determined, given above
What is the work done? W = 0
![Page 196: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/196.jpg)
Example 1 answers (cont’d)
Write the energy balance equation in terms of the change in temperature.
∆U = Q + W
NCv ∆T = Q
How much energy in the form of heat Q is absorbed by the gas? See above.
Now assume the heat absorbed by the gas was measured to be Q, but you did not measurethe temperature of of the bath. Determine what must have been the temperature of thebath. ∆T = Q
NCvwith N, Cv determined, given above
What is the work done? W = 0
![Page 197: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/197.jpg)
Example 1 answers (cont’d)
Write the energy balance equation in terms of the change in temperature.
∆U = Q + W
NCv ∆T = Q
How much energy in the form of heat Q is absorbed by the gas? See above.
Now assume the heat absorbed by the gas was measured to be Q, but you did not measurethe temperature of of the bath. Determine what must have been the temperature of thebath. ∆T = Q
NCvwith N, Cv determined, given above
What is the work done? W = 0
![Page 198: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/198.jpg)
Example 1 answers (cont’d)
Write the energy balance equation in terms of the change in temperature.
∆U = Q + W
NCv ∆T = Q
How much energy in the form of heat Q is absorbed by the gas? See above.
Now assume the heat absorbed by the gas was measured to be Q, but you did not measurethe temperature of of the bath. Determine what must have been the temperature of thebath. ∆T = Q
NCvwith N, Cv determined, given above
What is the work done? W = 0
![Page 199: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/199.jpg)
Example 2
Consider gas inside a cylinder with a piston that is fixed by a clamp
The initial P1,N are given and the constant volume heat capacity is Cv . From thebeginning, the entire system is immersed in a large heat bath at temperature T0.
Suddenly, the clamp is released. The clamp is replaced when the pressure reaches P2.
What type of thermodynamic process is this?
Is the change of state initiated by a shift away from thermal or mechanical equilibrium?
Draw a picture depicting the process, assuming the initial state is as shown, and indicate theheat and work flows.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 64 / 196
![Page 200: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/200.jpg)
Example 2
Consider gas inside a cylinder with a piston that is fixed by a clamp
The initial P1,N are given and the constant volume heat capacity is Cv . From thebeginning, the entire system is immersed in a large heat bath at temperature T0.
Suddenly, the clamp is released. The clamp is replaced when the pressure reaches P2.
What type of thermodynamic process is this?
Is the change of state initiated by a shift away from thermal or mechanical equilibrium?
Draw a picture depicting the process, assuming the initial state is as shown, and indicate theheat and work flows.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 64 / 196
![Page 201: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/201.jpg)
Example 2
Consider gas inside a cylinder with a piston that is fixed by a clamp
The initial P1,N are given and the constant volume heat capacity is Cv . From thebeginning, the entire system is immersed in a large heat bath at temperature T0.
Suddenly, the clamp is released. The clamp is replaced when the pressure reaches P2.
What type of thermodynamic process is this?
Is the change of state initiated by a shift away from thermal or mechanical equilibrium?
Draw a picture depicting the process, assuming the initial state is as shown, and indicate theheat and work flows.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 64 / 196
![Page 202: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/202.jpg)
Example 2
Consider gas inside a cylinder with a piston that is fixed by a clamp
The initial P1,N are given and the constant volume heat capacity is Cv . From thebeginning, the entire system is immersed in a large heat bath at temperature T0.
Suddenly, the clamp is released. The clamp is replaced when the pressure reaches P2.
What type of thermodynamic process is this?
Is the change of state initiated by a shift away from thermal or mechanical equilibrium?
Draw a picture depicting the process, assuming the initial state is as shown, and indicate theheat and work flows.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 64 / 196
![Page 203: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/203.jpg)
Example 2
Consider gas inside a cylinder with a piston that is fixed by a clamp
The initial P1,N are given and the constant volume heat capacity is Cv . From thebeginning, the entire system is immersed in a large heat bath at temperature T0.
Suddenly, the clamp is released. The clamp is replaced when the pressure reaches P2.
What type of thermodynamic process is this?
Is the change of state initiated by a shift away from thermal or mechanical equilibrium?
Draw a picture depicting the process, assuming the initial state is as shown, and indicate theheat and work flows.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 64 / 196
![Page 204: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/204.jpg)
Example 2
Consider gas inside a cylinder with a piston that is fixed by a clamp
The initial P1,N are given and the constant volume heat capacity is Cv . From thebeginning, the entire system is immersed in a large heat bath at temperature T0.
Suddenly, the clamp is released. The clamp is replaced when the pressure reaches P2.
What type of thermodynamic process is this?
Is the change of state initiated by a shift away from thermal or mechanical equilibrium?
Draw a picture depicting the process, assuming the initial state is as shown, and indicate theheat and work flows.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 64 / 196
![Page 205: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/205.jpg)
Example 2 (cont’d)
Write the energy balance equation in terms of the volume and temperature.
What is the work done by the gas?
How much energy in the form of heat Q is absorbed by the gas?
What is the change of internal energy?
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 65 / 196
![Page 206: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/206.jpg)
Example 2 (cont’d)
Write the energy balance equation in terms of the volume and temperature.
What is the work done by the gas?
How much energy in the form of heat Q is absorbed by the gas?
What is the change of internal energy?
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 65 / 196
![Page 207: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/207.jpg)
Example 2 (cont’d)
Write the energy balance equation in terms of the volume and temperature.
What is the work done by the gas?
How much energy in the form of heat Q is absorbed by the gas?
What is the change of internal energy?
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 65 / 196
![Page 208: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/208.jpg)
Example 2 (cont’d)
Write the energy balance equation in terms of the volume and temperature.
What is the work done by the gas?
How much energy in the form of heat Q is absorbed by the gas?
What is the change of internal energy?
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 65 / 196
![Page 209: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/209.jpg)
Example 2 answers
Consider gas inside a cylinder with a piston that is fixed by a clamp
The initial P1,N are given and the constant volume heat capacity is Cv . From the beginning,the entire system is immersed in a large heat bath at temperature T0. can solve for V1
Suddenly, the clamp is released. The clamp is replaced when the pressure reaches P2.What type of thermodynamic process is this? Isothermal expansionIs the change of state initiated by a shift away from thermal or mechanical equilibrium?MechanicalDraw a picture depicting the process, assuming the initial state is as shown, and indicate theheat and work flows.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 66 / 196
![Page 210: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/210.jpg)
Example 2 answers
Consider gas inside a cylinder with a piston that is fixed by a clampThe initial P1,N are given and the constant volume heat capacity is Cv . From the beginning,the entire system is immersed in a large heat bath at temperature T0. can solve for V1
Suddenly, the clamp is released. The clamp is replaced when the pressure reaches P2.What type of thermodynamic process is this? Isothermal expansionIs the change of state initiated by a shift away from thermal or mechanical equilibrium?MechanicalDraw a picture depicting the process, assuming the initial state is as shown, and indicate theheat and work flows.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 66 / 196
![Page 211: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/211.jpg)
Example 2 answers
Consider gas inside a cylinder with a piston that is fixed by a clampThe initial P1,N are given and the constant volume heat capacity is Cv . From the beginning,the entire system is immersed in a large heat bath at temperature T0. can solve for V1
Suddenly, the clamp is released. The clamp is replaced when the pressure reaches P2.
What type of thermodynamic process is this? Isothermal expansionIs the change of state initiated by a shift away from thermal or mechanical equilibrium?MechanicalDraw a picture depicting the process, assuming the initial state is as shown, and indicate theheat and work flows.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 66 / 196
![Page 212: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/212.jpg)
Example 2 answers
Consider gas inside a cylinder with a piston that is fixed by a clampThe initial P1,N are given and the constant volume heat capacity is Cv . From the beginning,the entire system is immersed in a large heat bath at temperature T0. can solve for V1
Suddenly, the clamp is released. The clamp is replaced when the pressure reaches P2.What type of thermodynamic process is this? Isothermal expansion
Is the change of state initiated by a shift away from thermal or mechanical equilibrium?MechanicalDraw a picture depicting the process, assuming the initial state is as shown, and indicate theheat and work flows.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 66 / 196
![Page 213: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/213.jpg)
Example 2 answers
Consider gas inside a cylinder with a piston that is fixed by a clampThe initial P1,N are given and the constant volume heat capacity is Cv . From the beginning,the entire system is immersed in a large heat bath at temperature T0. can solve for V1
Suddenly, the clamp is released. The clamp is replaced when the pressure reaches P2.What type of thermodynamic process is this? Isothermal expansionIs the change of state initiated by a shift away from thermal or mechanical equilibrium?Mechanical
Draw a picture depicting the process, assuming the initial state is as shown, and indicate theheat and work flows.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 66 / 196
![Page 214: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/214.jpg)
Example 2 answers
Consider gas inside a cylinder with a piston that is fixed by a clampThe initial P1,N are given and the constant volume heat capacity is Cv . From the beginning,the entire system is immersed in a large heat bath at temperature T0. can solve for V1
Suddenly, the clamp is released. The clamp is replaced when the pressure reaches P2.What type of thermodynamic process is this? Isothermal expansionIs the change of state initiated by a shift away from thermal or mechanical equilibrium?MechanicalDraw a picture depicting the process, assuming the initial state is as shown, and indicate theheat and work flows.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 66 / 196
![Page 215: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/215.jpg)
Example 2 answers (cont’d)
Write the energy balance equation in terms of the volume and temperature.
∆U = Q + W
NCv ∆T = Q −∫ V2
V1
NRT0
VdV
What is the work done by the gas? W = −NRT0 ln V2V1
How much energy in the form of heat Q is absorbed by the gas? Q = NRT0 ln V2V1
What is the change of internal energy? ∆U = 0
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 67 / 196
![Page 216: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/216.jpg)
Example 2 answers (cont’d)
Write the energy balance equation in terms of the volume and temperature.
∆U = Q + W
NCv ∆T = Q −∫ V2
V1
NRT0
VdV
What is the work done by the gas? W = −NRT0 ln V2V1
How much energy in the form of heat Q is absorbed by the gas? Q = NRT0 ln V2V1
What is the change of internal energy? ∆U = 0
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 67 / 196
![Page 217: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/217.jpg)
Example 2 answers (cont’d)
Write the energy balance equation in terms of the volume and temperature.
∆U = Q + W
NCv ∆T = Q −∫ V2
V1
NRT0
VdV
What is the work done by the gas? W = −NRT0 ln V2V1
How much energy in the form of heat Q is absorbed by the gas? Q = NRT0 ln V2V1
What is the change of internal energy? ∆U = 0
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 67 / 196
![Page 218: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/218.jpg)
Example 2 answers (cont’d)
Write the energy balance equation in terms of the volume and temperature.
∆U = Q + W
NCv ∆T = Q −∫ V2
V1
NRT0
VdV
What is the work done by the gas? W = −NRT0 ln V2V1
How much energy in the form of heat Q is absorbed by the gas? Q = NRT0 ln V2V1
What is the change of internal energy? ∆U = 0
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 67 / 196
![Page 219: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/219.jpg)
True/false: the constant volume heat capacity of an ideal gas is always equal to thederivative of heat absorbed per mole with respect to the temperature.
True/false: the constant volume heat capacity of an ideal gas is always equal to thederivative of internal energy per mole with respect to the temperature.
True/false: the constant volume heat capacity of an ideal gas is only useful in calculations ifthe process occurs at constant volume.
True/false: Heat is a form of thermal energy. Work is a form of mechanical energy. Internalenergy is neither thermal nor mechanical energy.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 68 / 196
![Page 220: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/220.jpg)
Example 3
Consider a gas inside a cylinder with piston without a clamp. A weight of mass m is sittingon top of the piston. The cross-sectional area of the piston is A. Assume the system is atequilibrium and that atmospheric pressure is negligible. The number of moles of gas is N andthe volume is V1.The system is then immersed in a bath at temperature T2.What type of thermodynamic process is this? Is the change of state initiated by a shift awayfrom thermal or mechanical equilibrium?Draw a picture depicting the process and indicate the heat and work flows, assumingT2 < T1.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 69 / 196
![Page 221: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/221.jpg)
Example 3 (cont’d)
Write the energy balance equation in terms of T1 and T2.
What is the work done?
What is the heat absorbed?
What is the change in internal energy?
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 70 / 196
![Page 222: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/222.jpg)
Example 3 answers
Consider a gas inside a cylinder with piston without a clamp. A weight of mass m is sittingon top of the piston. The cross-sectional area of the piston is A. Assume the system is atequilibrium and that atmospheric pressure is negligible. The number of moles of gas is N and
the volume is V1. P1 = mg/A. T1 = P1V1NR
The system is then immersed in a bath at temperature T2.What type of thermodynamic process is this? Isobaric heating/cooling. Is the change ofstate initiated by a shift away from thermal or mechanical equilibrium? ThermalDraw a picture depicting the process and indicate the heat and work flows, assumingT2 < T1. Gas compresses
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 71 / 196
![Page 223: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/223.jpg)
Example 3 answers (cont’d)
Write the energy balance equation in terms of T1 and T2.
∆U = Q + W
NCv ∆T = Q − NR∆T
What is the work done? W = −NR∆T
What is the heat absorbed? Q = N(CV + R)∆T
What is the change in internal energy? ∆U = NCV ∆T
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 72 / 196
![Page 224: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/224.jpg)
Recall our picture for an isothermal process. What if there is an insulating materialsurrounding the cylinder, so there is no thermal contact with the surroundings?
Q = 0 but W 6= 0. This is an adiabatic expansion.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 73 / 196
![Page 225: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/225.jpg)
Recall our picture for an isothermal process. What if there is an insulating materialsurrounding the cylinder, so there is no thermal contact with the surroundings?
Q = 0 but W 6= 0. This is an adiabatic expansion.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 73 / 196
![Page 226: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/226.jpg)
Adiabatic Expansion
W =∫ V2
V1
NRTV
dV ; but T is no longer constant! How to integrate?
For every small piece of work NRTV
dV done, the temperature T decreases since the energy isnot replaced by heat as in the isothermal process.
Set up the energy balance for this small change; the two sides of the equation (one in termsof T , other in terms of V ) are now coupled:
∆U = W∫ T2
T1
NCv dT = −∫ V2
V1
NRT
VdV∫ T2
T1
1
TdT = −
R
Cv
∫ V2
V1
1
VdV
ln
(T2
T1
)= ln
(V2
V1
)− RCv
(T2
T1
)=
(V1
V2
) RCv
T2 = T1
(V1
V2
) RCv
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 74 / 196
![Page 227: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/227.jpg)
Adiabatic Expansion
W =∫ V2
V1
NRTV
dV ; but T is no longer constant! How to integrate?
For every small piece of work NRTV
dV done, the temperature T decreases since the energy isnot replaced by heat as in the isothermal process.
Set up the energy balance for this small change; the two sides of the equation (one in termsof T , other in terms of V ) are now coupled:
∆U = W∫ T2
T1
NCv dT = −∫ V2
V1
NRT
VdV∫ T2
T1
1
TdT = −
R
Cv
∫ V2
V1
1
VdV
ln
(T2
T1
)= ln
(V2
V1
)− RCv
(T2
T1
)=
(V1
V2
) RCv
T2 = T1
(V1
V2
) RCv
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 74 / 196
![Page 228: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/228.jpg)
Adiabatic Expansion
W =∫ V2
V1
NRTV
dV ; but T is no longer constant! How to integrate?
For every small piece of work NRTV
dV done, the temperature T decreases since the energy isnot replaced by heat as in the isothermal process.
Set up the energy balance for this small change; the two sides of the equation (one in termsof T , other in terms of V ) are now coupled:
∆U = W∫ T2
T1
NCv dT = −∫ V2
V1
NRT
VdV∫ T2
T1
1
TdT = −
R
Cv
∫ V2
V1
1
VdV
ln
(T2
T1
)= ln
(V2
V1
)− RCv
(T2
T1
)=
(V1
V2
) RCv
T2 = T1
(V1
V2
) RCv
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 74 / 196
![Page 229: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/229.jpg)
Adiabatic Expansion
Given T2 = T1
(V1V2
) RCv for an adiabatic process, what is the ∆U = W ?
∆U = NCv ∆T = NCv [T2 − T1] = NCv T1
[(V1V2
) RCv − 1
]
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 75 / 196
![Page 230: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/230.jpg)
Constant pressure heat capacity and enthalpy
Recall that the expression NCv ∆T can only be used to compute the heat Q exchanged for aconstant volume process.
For an isothermal or constant pressure (isobaric) process, we have seen that the heatexchanged differs.
We introduced the constant pressure heat capacity, which is also experimentally measuredfor various types of systems. It can be used to directly calculate the heat Q exchanged for aconstant pressure process. Consider again our constant pressure process for an ideal gas
Cp ≡ CV + R
=dU
dT+
d(RT )
dT
=dU
dT+
d(PV )
dT
=d
dT(U + PV )
The quantity U + PV is called the enthalpy of the system and U + PV its molar enthalpy.Changes in enthalpies ∆H are often reported for thermodynamic processes since it iscommon for processes to occur at constant pressure. ∆H = ∆(U + PV ) always, but∆H = Q only if process occurs at constant pressure
We then have Cp = ( ∂H∂T
)P ; compare Cv = ( ∂U∂T
)V
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 76 / 196
![Page 231: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/231.jpg)
Path-independence of internal energy changes (but not heat, work)
In more complicated problems, a system may be subject to multiple thermodynamicprocesses in succession. (This is common in engines, which are used to convert internalenergy of substances into useful work.)
The value of ∆U is independent of the path followed by a system between two statesspecified by values of the state variables. Thermodynamic quantities that have this propertyare called thermodynamic potentials (compare mechanical potential energy).
Consider a PT diagram of an ideal gas with the following two paths connecting states(P1,T1), (P2,T2).
![Page 232: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/232.jpg)
Path-independence of results
Path A: 1) Isothermal compression: (P1,T1) to (P2,T1); 2) Isobaric heating: (P2,T1) to(P2,T2)(proceeds through intermediate state (P2,T1))
Path B: 1) Isobaric heating: (P1,T1) to (P1,T2); 2) Isothermal compression: (P1,T2) to(P2,T2) (proceeds through intermediate state (P1,T2))
![Page 233: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/233.jpg)
Path-independence of results
One mole of gas at T1 = 25C and P1 = 1 bar is heated and compressed to T2 = 300C andP2 = 10 bar. Compute heat and work along paths A,B
Compute Q, W , and ∆U = Q + W as sum over paths and show ∆U is the same for bothpaths.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 79 / 196
![Page 234: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/234.jpg)
Path-independence of results (path A)
Path A: (P1 = 1 bar,T1 = 298K) to (P2 = 10 bar,T1 = 298K); then to(P2 = 10 bar,T2 = 573K)
1 Isothermal compression. Work:
W1 = −NRT ln(V2/V1)
We are given P1, P2, not V1, V2, so rewrite
lnV2
V1= ln
P2
P1= − ln
P1
P2
Hence W1 = 8.314J/mol K × 298K × ln(10/1). For the heat, since Q = −W for isothermalcompression of ideal gas, we have:
Q1 = −W1
.2 Isobaric heating.
W2 = −NR(T2 − T1) = −8.314J/mol K × (573 − 298K)
Q2 = N
∫ T2
T1
Cp(T ) dT = N(Cv + R)(T2 − T1) = 38J/mol K × 275K
Qtot = Q1 + Q2 = 4742.3 J/mol ; Wtot = W1 + W2 = 3421.4 J/mol ; ∆Utot = 8163.7 J/mol
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 80 / 196
![Page 235: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/235.jpg)
Path-independence of results (path A)
Path A: (P1 = 1 bar,T1 = 298K) to (P2 = 10 bar,T1 = 298K); then to(P2 = 10 bar,T2 = 573K)
1 Isothermal compression. Work:
W1 = −NRT ln(V2/V1)
We are given P1, P2, not V1, V2, so rewrite
lnV2
V1= ln
P2
P1= − ln
P1
P2
Hence W1 = 8.314J/mol K × 298K × ln(10/1). For the heat, since Q = −W for isothermalcompression of ideal gas, we have:
Q1 = −W1
.
2 Isobaric heating.
W2 = −NR(T2 − T1) = −8.314J/mol K × (573 − 298K)
Q2 = N
∫ T2
T1
Cp(T ) dT = N(Cv + R)(T2 − T1) = 38J/mol K × 275K
Qtot = Q1 + Q2 = 4742.3 J/mol ; Wtot = W1 + W2 = 3421.4 J/mol ; ∆Utot = 8163.7 J/mol
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 80 / 196
![Page 236: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/236.jpg)
Path-independence of results (path A)
Path A: (P1 = 1 bar,T1 = 298K) to (P2 = 10 bar,T1 = 298K); then to(P2 = 10 bar,T2 = 573K)
1 Isothermal compression. Work:
W1 = −NRT ln(V2/V1)
We are given P1, P2, not V1, V2, so rewrite
lnV2
V1= ln
P2
P1= − ln
P1
P2
Hence W1 = 8.314J/mol K × 298K × ln(10/1). For the heat, since Q = −W for isothermalcompression of ideal gas, we have:
Q1 = −W1
.2 Isobaric heating.
W2 = −NR(T2 − T1) = −8.314J/mol K × (573 − 298K)
Q2 = N
∫ T2
T1
Cp(T ) dT = N(Cv + R)(T2 − T1) = 38J/mol K × 275K
Qtot = Q1 + Q2 = 4742.3 J/mol ; Wtot = W1 + W2 = 3421.4 J/mol ; ∆Utot = 8163.7 J/mol
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 80 / 196
![Page 237: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/237.jpg)
Path-independence of results (path A)
Path A: (P1 = 1 bar,T1 = 298K) to (P2 = 10 bar,T1 = 298K); then to(P2 = 10 bar,T2 = 573K)
1 Isothermal compression. Work:
W1 = −NRT ln(V2/V1)
We are given P1, P2, not V1, V2, so rewrite
lnV2
V1= ln
P2
P1= − ln
P1
P2
Hence W1 = 8.314J/mol K × 298K × ln(10/1). For the heat, since Q = −W for isothermalcompression of ideal gas, we have:
Q1 = −W1
.2 Isobaric heating.
W2 = −NR(T2 − T1) = −8.314J/mol K × (573 − 298K)
Q2 = N
∫ T2
T1
Cp(T ) dT = N(Cv + R)(T2 − T1) = 38J/mol K × 275K
Qtot = Q1 + Q2 = 4742.3 J/mol ; Wtot = W1 + W2 = 3421.4 J/mol ; ∆Utot = 8163.7 J/mol
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 80 / 196
![Page 238: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/238.jpg)
Path-independence of results (path B)
Path B: (P1 = 1 bar,T1 = 298 K) to (P1 = 1 bar,T2 = 573K); then to(P2 = 10 bar,T2 = 573K)
1 Isobaric heating:
W1 = −NR(T2 − T1) = −2286.3 J/mol
Q1 = N(Cv + R)(T2 − T1) = NCp(T2 − T1) = 10450 J/mol
2 Isothermal compression:
W2 = −NRT lnP1
P2= 10972.2 J/mol
Q2 = −W2 = NRT lnP1
P2= −10972.2 J/mol
Qtot = Q1 + Q2 = −522.2 J/mol ; Wtot = W1 + W2 = 8685.9 J/mol ; ∆Utot = 8163.7 J/mol
![Page 239: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/239.jpg)
Path-independence of results (path B)
Path B: (P1 = 1 bar,T1 = 298 K) to (P1 = 1 bar,T2 = 573K); then to(P2 = 10 bar,T2 = 573K)
1 Isobaric heating:
W1 = −NR(T2 − T1) = −2286.3 J/mol
Q1 = N(Cv + R)(T2 − T1) = NCp(T2 − T1) = 10450 J/mol
2 Isothermal compression:
W2 = −NRT lnP1
P2= 10972.2 J/mol
Q2 = −W2 = NRT lnP1
P2= −10972.2 J/mol
Qtot = Q1 + Q2 = −522.2 J/mol ; Wtot = W1 + W2 = 8685.9 J/mol ; ∆Utot = 8163.7 J/mol
![Page 240: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/240.jpg)
Path-independence of results (path B)
Path B: (P1 = 1 bar,T1 = 298 K) to (P1 = 1 bar,T2 = 573K); then to(P2 = 10 bar,T2 = 573K)
1 Isobaric heating:
W1 = −NR(T2 − T1) = −2286.3 J/mol
Q1 = N(Cv + R)(T2 − T1) = NCp(T2 − T1) = 10450 J/mol
2 Isothermal compression:
W2 = −NRT lnP1
P2= 10972.2 J/mol
Q2 = −W2 = NRT lnP1
P2= −10972.2 J/mol
Qtot = Q1 + Q2 = −522.2 J/mol ; Wtot = W1 + W2 = 8685.9 J/mol ; ∆Utot = 8163.7 J/mol
![Page 241: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/241.jpg)
Path-independence of results (path B)
Path B: (P1 = 1 bar,T1 = 298 K) to (P1 = 1 bar,T2 = 573K); then to(P2 = 10 bar,T2 = 573K)
1 Isobaric heating:
W1 = −NR(T2 − T1) = −2286.3 J/mol
Q1 = N(Cv + R)(T2 − T1) = NCp(T2 − T1) = 10450 J/mol
2 Isothermal compression:
W2 = −NRT lnP1
P2= 10972.2 J/mol
Q2 = −W2 = NRT lnP1
P2= −10972.2 J/mol
Qtot = Q1 + Q2 = −522.2 J/mol ; Wtot = W1 + W2 = 8685.9 J/mol ; ∆Utot = 8163.7 J/mol
![Page 242: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/242.jpg)
Recall our picture for an isothermal process. What if there is an insulating materialsurrounding the cylinder, so there is no thermal contact with the surroundings?
Q = 0 but W 6= 0. This is an adiabatic expansion.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 82 / 196
![Page 243: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/243.jpg)
Recall our picture for an isothermal process. What if there is an insulating materialsurrounding the cylinder, so there is no thermal contact with the surroundings?
Q = 0 but W 6= 0. This is an adiabatic expansion.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 82 / 196
![Page 244: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/244.jpg)
Adiabatic Expansion
W = −∫ V2
V1
NRTV
dV ; but T is no longer constant! How to integrate?
For every small piece of work NRTV
dV done, the temperature T decreases since the energy isnot replaced by heat as in the isothermal process.
Set up the energy balance for this small change; the two sides of the equation (one in termsof T , other in terms of V ) are now coupled:
∆U = W∫ T2
T1
NCv dT = −∫ V2
V1
NRT
VdV∫ T2
T1
1
TdT = −
R
Cv
∫ V2
V1
1
VdV
ln
(T2
T1
)= ln
(V2
V1
)− RCv
(T2
T1
)=
(V1
V2
) RCv
T2 = T1
(V1
V2
) RCv
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 83 / 196
![Page 245: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/245.jpg)
Adiabatic Expansion
W = −∫ V2
V1
NRTV
dV ; but T is no longer constant! How to integrate?
For every small piece of work NRTV
dV done, the temperature T decreases since the energy isnot replaced by heat as in the isothermal process.
Set up the energy balance for this small change; the two sides of the equation (one in termsof T , other in terms of V ) are now coupled:
∆U = W∫ T2
T1
NCv dT = −∫ V2
V1
NRT
VdV∫ T2
T1
1
TdT = −
R
Cv
∫ V2
V1
1
VdV
ln
(T2
T1
)= ln
(V2
V1
)− RCv
(T2
T1
)=
(V1
V2
) RCv
T2 = T1
(V1
V2
) RCv
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 83 / 196
![Page 246: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/246.jpg)
Adiabatic Expansion
W = −∫ V2
V1
NRTV
dV ; but T is no longer constant! How to integrate?
For every small piece of work NRTV
dV done, the temperature T decreases since the energy isnot replaced by heat as in the isothermal process.
Set up the energy balance for this small change; the two sides of the equation (one in termsof T , other in terms of V ) are now coupled:
∆U = W∫ T2
T1
NCv dT = −∫ V2
V1
NRT
VdV∫ T2
T1
1
TdT = −
R
Cv
∫ V2
V1
1
VdV
ln
(T2
T1
)= ln
(V2
V1
)− RCv
(T2
T1
)=
(V1
V2
) RCv
T2 = T1
(V1
V2
) RCv
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 83 / 196
![Page 247: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/247.jpg)
Adiabatic Expansion
Given T2 = T1
(V1V2
) RCv for an adiabatic process, what is the ∆U = W ?
∆U = NCv ∆T = NCv [T2 − T1] = NCv T1
[(V1V2
) RCv − 1
]
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 84 / 196
![Page 248: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/248.jpg)
Outline
1 What is Thermodynamics?
2 Some Thermodynamics Terminology
3 Basic concepts of thermodynamics
4 Thermodynamic equations of state
5 Conservation of Mass
6 Integral formulation of mass balance
7 Multicomponent mass balance
8 Conservation of energyEnergy balance
9 Towards the 2nd Law of Thermodynamics
10 Toward engineering applications: thermodynamic cycles and heat engines
11 Thermodynamic properties of real substances (not ideal gases)Computation of heat and work for thermodynamic processes involving nonideal substancesComputation of entropy changes for thermodynamic processes involving nonideal substances
12 Outline of remaining topics and schedule
13 Further analysis of the behavior of real gases
14 Phase equilibrium
15 More on Gibbs free energy and applications to phase equilibrium
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 85 / 196
![Page 249: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/249.jpg)
Example 2
Do our pictures make sense?
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 86 / 196
![Page 250: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/250.jpg)
Spontaneous (irreversible) processes
So far we have computed heat/work done by/on a system, but have not considered theeffects on other systems in contact with our system. We now consider two systems in thermaland/or mechanical contact, which may be considered subsystems of one composite system
We seek to keep track of energy transferred between the two systems
First consider two systems a,b separated by a piston (see Figure), which is insulating (noheat transferred between a,b). We ask: if system a expands isothermally, compressing systemb, how much of the internal energy of system a has been transferred to system b throughmechanical work, once the two systems reach equilibrium?
Recall, we noted that internal energy cannot be completely converted to useful mechanicalwork.
![Page 251: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/251.jpg)
Spontaneous (irreversible) processes
So far we have computed heat/work done by/on a system, but have not considered theeffects on other systems in contact with our system. We now consider two systems in thermaland/or mechanical contact, which may be considered subsystems of one composite system
We seek to keep track of energy transferred between the two systems
First consider two systems a,b separated by a piston (see Figure), which is insulating (noheat transferred between a,b). We ask: if system a expands isothermally, compressing systemb, how much of the internal energy of system a has been transferred to system b throughmechanical work, once the two systems reach equilibrium?
Recall, we noted that internal energy cannot be completely converted to useful mechanicalwork.
![Page 252: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/252.jpg)
Spontaneous (irreversible) processes
So far we have computed heat/work done by/on a system, but have not considered theeffects on other systems in contact with our system. We now consider two systems in thermaland/or mechanical contact, which may be considered subsystems of one composite system
We seek to keep track of energy transferred between the two systems
First consider two systems a,b separated by a piston (see Figure), which is insulating (noheat transferred between a,b). We ask: if system a expands isothermally, compressing systemb, how much of the internal energy of system a has been transferred to system b throughmechanical work, once the two systems reach equilibrium?
Recall, we noted that internal energy cannot be completely converted to useful mechanicalwork.
![Page 253: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/253.jpg)
Spontaneous (irreversible) processes
So far we have computed heat/work done by/on a system, but have not considered theeffects on other systems in contact with our system. We now consider two systems in thermaland/or mechanical contact, which may be considered subsystems of one composite system
We seek to keep track of energy transferred between the two systems
First consider two systems a,b separated by a piston (see Figure), which is insulating (noheat transferred between a,b). We ask: if system a expands isothermally, compressing systemb, how much of the internal energy of system a has been transferred to system b throughmechanical work, once the two systems reach equilibrium?
Recall, we noted that internal energy cannot be completely converted to useful mechanicalwork.
![Page 254: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/254.jpg)
Spontaneous (irreversible) processes
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 88 / 196
![Page 255: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/255.jpg)
Spontaneous (irreversible) processes: maximum usable work
Compute work for expansion of system a as −∫ Va,2
Va,1Pa dV
Compute work for compression of system b as −∫ Vb,2
Vb,1Pb dV
Pa decreases and Pb decreases until Pa = Pb at equilibrium
|∫ Va,2
Va,1Pa dV | ≥ |
∫ Vb,2
Vb,1Pb dV | (work done by a is greater than work done on b unless
Pa = Pb at at all times)
What about conservation of energy? Remaining work generates kinetic energy
Excess work used to generate kinetic energy results in oscillations (of piston). It is dissipatedas frictional heat during oscillations
Irreversible/spontaneous process: any process that occurs at a finite rate due to finitedifference between intensive variables of two subsystems
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 89 / 196
![Page 256: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/256.jpg)
Spontaneous (irreversible) processes: maximum usable work
Compute work for expansion of system a as −∫ Va,2
Va,1Pa dV
Compute work for compression of system b as −∫ Vb,2
Vb,1Pb dV
Pa decreases and Pb decreases until Pa = Pb at equilibrium
|∫ Va,2
Va,1Pa dV | ≥ |
∫ Vb,2
Vb,1Pb dV | (work done by a is greater than work done on b unless
Pa = Pb at at all times)
What about conservation of energy? Remaining work generates kinetic energy
Excess work used to generate kinetic energy results in oscillations (of piston). It is dissipatedas frictional heat during oscillations
Irreversible/spontaneous process: any process that occurs at a finite rate due to finitedifference between intensive variables of two subsystems
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 89 / 196
![Page 257: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/257.jpg)
Spontaneous (irreversible) processes: maximum usable work
Compute work for expansion of system a as −∫ Va,2
Va,1Pa dV
Compute work for compression of system b as −∫ Vb,2
Vb,1Pb dV
Pa decreases and Pb decreases until Pa = Pb at equilibrium
|∫ Va,2
Va,1Pa dV | ≥ |
∫ Vb,2
Vb,1Pb dV | (work done by a is greater than work done on b unless
Pa = Pb at at all times)
What about conservation of energy? Remaining work generates kinetic energy
Excess work used to generate kinetic energy results in oscillations (of piston). It is dissipatedas frictional heat during oscillations
Irreversible/spontaneous process: any process that occurs at a finite rate due to finitedifference between intensive variables of two subsystems
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 89 / 196
![Page 258: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/258.jpg)
Spontaneous (irreversible) processes: maximum usable work
Compute work for expansion of system a as −∫ Va,2
Va,1Pa dV
Compute work for compression of system b as −∫ Vb,2
Vb,1Pb dV
Pa decreases and Pb decreases until Pa = Pb at equilibrium
|∫ Va,2
Va,1Pa dV | ≥ |
∫ Vb,2
Vb,1Pb dV | (work done by a is greater than work done on b unless
Pa = Pb at at all times)
What about conservation of energy? Remaining work generates kinetic energy
Excess work used to generate kinetic energy results in oscillations (of piston). It is dissipatedas frictional heat during oscillations
Irreversible/spontaneous process: any process that occurs at a finite rate due to finitedifference between intensive variables of two subsystems
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 89 / 196
![Page 259: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/259.jpg)
Spontaneous (irreversible) processes: maximum usable work
Compute work for expansion of system a as −∫ Va,2
Va,1Pa dV
Compute work for compression of system b as −∫ Vb,2
Vb,1Pb dV
Pa decreases and Pb decreases until Pa = Pb at equilibrium
|∫ Va,2
Va,1Pa dV | ≥ |
∫ Vb,2
Vb,1Pb dV | (work done by a is greater than work done on b unless
Pa = Pb at at all times)
What about conservation of energy? Remaining work generates kinetic energy
Excess work used to generate kinetic energy results in oscillations (of piston). It is dissipatedas frictional heat during oscillations
Irreversible/spontaneous process: any process that occurs at a finite rate due to finitedifference between intensive variables of two subsystems
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 89 / 196
![Page 260: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/260.jpg)
Spontaneous (irreversible) processes: maximum usable work
Compute work for expansion of system a as −∫ Va,2
Va,1Pa dV
Compute work for compression of system b as −∫ Vb,2
Vb,1Pb dV
Pa decreases and Pb decreases until Pa = Pb at equilibrium
|∫ Va,2
Va,1Pa dV | ≥ |
∫ Vb,2
Vb,1Pb dV | (work done by a is greater than work done on b unless
Pa = Pb at at all times)
What about conservation of energy? Remaining work generates kinetic energy
Excess work used to generate kinetic energy results in oscillations (of piston). It is dissipatedas frictional heat during oscillations
Irreversible/spontaneous process: any process that occurs at a finite rate due to finitedifference between intensive variables of two subsystems
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 89 / 196
![Page 261: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/261.jpg)
Spontaneous (irreversible) processes: maximum usable work
Compute work for expansion of system a as −∫ Va,2
Va,1Pa dV
Compute work for compression of system b as −∫ Vb,2
Vb,1Pb dV
Pa decreases and Pb decreases until Pa = Pb at equilibrium
|∫ Va,2
Va,1Pa dV | ≥ |
∫ Vb,2
Vb,1Pb dV | (work done by a is greater than work done on b unless
Pa = Pb at at all times)
What about conservation of energy? Remaining work generates kinetic energy
Excess work used to generate kinetic energy results in oscillations (of piston). It is dissipatedas frictional heat during oscillations
Irreversible/spontaneous process: any process that occurs at a finite rate due to finitedifference between intensive variables of two subsystems
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 89 / 196
![Page 262: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/262.jpg)
Understanding heat: putting heat and work on an “equal footing”
Since heat is always evolved in any spontaneous process, we should investigate it further andput it on an equal footing as work.
Do not yet have expression for Q analogous to W = −∫ V2
V1P dV
Recall we always left Q unspecified in the energy balance equation until the final step
What is the extensive variable associated with T , analogous to the extensive variable Vassociated with P?
In other words, can we write dQ = Td??, analogously to dW = −PdV ?
If so, what is the extensive variable ?? in this equation?
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 90 / 196
![Page 263: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/263.jpg)
Understanding heat: putting heat and work on an “equal footing”
Since heat is always evolved in any spontaneous process, we should investigate it further andput it on an equal footing as work.
Do not yet have expression for Q analogous to W = −∫ V2
V1P dV
Recall we always left Q unspecified in the energy balance equation until the final step
What is the extensive variable associated with T , analogous to the extensive variable Vassociated with P?
In other words, can we write dQ = Td??, analogously to dW = −PdV ?
If so, what is the extensive variable ?? in this equation?
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 90 / 196
![Page 264: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/264.jpg)
Understanding heat: putting heat and work on an “equal footing”
Since heat is always evolved in any spontaneous process, we should investigate it further andput it on an equal footing as work.
Do not yet have expression for Q analogous to W = −∫ V2
V1P dV
Recall we always left Q unspecified in the energy balance equation until the final step
What is the extensive variable associated with T , analogous to the extensive variable Vassociated with P?
In other words, can we write dQ = Td??, analogously to dW = −PdV ?
If so, what is the extensive variable ?? in this equation?
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 90 / 196
![Page 265: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/265.jpg)
Understanding heat: putting heat and work on an “equal footing”
Since heat is always evolved in any spontaneous process, we should investigate it further andput it on an equal footing as work.
Do not yet have expression for Q analogous to W = −∫ V2
V1P dV
Recall we always left Q unspecified in the energy balance equation until the final step
What is the extensive variable associated with T , analogous to the extensive variable Vassociated with P?
In other words, can we write dQ = Td??, analogously to dW = −PdV ?
If so, what is the extensive variable ?? in this equation?
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 90 / 196
![Page 266: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/266.jpg)
Understanding heat: putting heat and work on an “equal footing”
Since heat is always evolved in any spontaneous process, we should investigate it further andput it on an equal footing as work.
Do not yet have expression for Q analogous to W = −∫ V2
V1P dV
Recall we always left Q unspecified in the energy balance equation until the final step
What is the extensive variable associated with T , analogous to the extensive variable Vassociated with P?
In other words, can we write dQ = Td??, analogously to dW = −PdV ?
If so, what is the extensive variable ?? in this equation?
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 90 / 196
![Page 267: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/267.jpg)
Understanding heat: putting heat and work on an “equal footing”
Since heat is always evolved in any spontaneous process, we should investigate it further andput it on an equal footing as work.
Do not yet have expression for Q analogous to W = −∫ V2
V1P dV
Recall we always left Q unspecified in the energy balance equation until the final step
What is the extensive variable associated with T , analogous to the extensive variable Vassociated with P?
In other words, can we write dQ = Td??, analogously to dW = −PdV ?
If so, what is the extensive variable ?? in this equation?
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 90 / 196
![Page 268: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/268.jpg)
Understanding heat: putting heat and work on an “equal footing”
Note that the new extensive variable (call it S) must have units of J/K .
Unlike V , we don’t know how to directly measure this new extensive variable.
Now, assume in an isothermal expansion at constant temperature T , we measure the heat Qtransferred during the expansion.
Since the temperature is constant, we have
dQ = TdS∫ Q2
Q1
dQ =
∫ S2
S1
TdS∫ Q2
Q1
dQ = T
∫ S2
S1
dS
Q = T ∆S
Compare W = −P∆V for a constant pressure (isobaric) process
Now give the name entropy to this new extensive variable S; we will consider its physicalmeaning soon.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 91 / 196
![Page 269: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/269.jpg)
Understanding heat: putting heat and work on an “equal footing”
Note that the new extensive variable (call it S) must have units of J/K .
Unlike V , we don’t know how to directly measure this new extensive variable.
Now, assume in an isothermal expansion at constant temperature T , we measure the heat Qtransferred during the expansion.
Since the temperature is constant, we have
dQ = TdS∫ Q2
Q1
dQ =
∫ S2
S1
TdS∫ Q2
Q1
dQ = T
∫ S2
S1
dS
Q = T ∆S
Compare W = −P∆V for a constant pressure (isobaric) process
Now give the name entropy to this new extensive variable S; we will consider its physicalmeaning soon.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 91 / 196
![Page 270: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/270.jpg)
Understanding heat: putting heat and work on an “equal footing”
Note that the new extensive variable (call it S) must have units of J/K .
Unlike V , we don’t know how to directly measure this new extensive variable.
Now, assume in an isothermal expansion at constant temperature T , we measure the heat Qtransferred during the expansion.
Since the temperature is constant, we have
dQ = TdS∫ Q2
Q1
dQ =
∫ S2
S1
TdS∫ Q2
Q1
dQ = T
∫ S2
S1
dS
Q = T ∆S
Compare W = −P∆V for a constant pressure (isobaric) process
Now give the name entropy to this new extensive variable S; we will consider its physicalmeaning soon.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 91 / 196
![Page 271: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/271.jpg)
Understanding heat: putting heat and work on an “equal footing”
Note that the new extensive variable (call it S) must have units of J/K .
Unlike V , we don’t know how to directly measure this new extensive variable.
Now, assume in an isothermal expansion at constant temperature T , we measure the heat Qtransferred during the expansion.
Since the temperature is constant, we have
dQ = TdS∫ Q2
Q1
dQ =
∫ S2
S1
TdS∫ Q2
Q1
dQ = T
∫ S2
S1
dS
Q = T ∆S
Compare W = −P∆V for a constant pressure (isobaric) process
Now give the name entropy to this new extensive variable S; we will consider its physicalmeaning soon.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 91 / 196
![Page 272: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/272.jpg)
Understanding heat: putting heat and work on an “equal footing”
Note that the new extensive variable (call it S) must have units of J/K .
Unlike V , we don’t know how to directly measure this new extensive variable.
Now, assume in an isothermal expansion at constant temperature T , we measure the heat Qtransferred during the expansion.
Since the temperature is constant, we have
dQ = TdS∫ Q2
Q1
dQ =
∫ S2
S1
TdS∫ Q2
Q1
dQ = T
∫ S2
S1
dS
Q = T ∆S
Compare W = −P∆V for a constant pressure (isobaric) process
Now give the name entropy to this new extensive variable S; we will consider its physicalmeaning soon.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 91 / 196
![Page 273: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/273.jpg)
Understanding heat: putting heat and work on an “equal footing”
Note that the new extensive variable (call it S) must have units of J/K .
Unlike V , we don’t know how to directly measure this new extensive variable.
Now, assume in an isothermal expansion at constant temperature T , we measure the heat Qtransferred during the expansion.
Since the temperature is constant, we have
dQ = TdS∫ Q2
Q1
dQ =
∫ S2
S1
TdS∫ Q2
Q1
dQ = T
∫ S2
S1
dS
Q = T ∆S
Compare W = −P∆V for a constant pressure (isobaric) process
Now give the name entropy to this new extensive variable S; we will consider its physicalmeaning soon.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 91 / 196
![Page 274: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/274.jpg)
Understanding heat: putting heat and work on an “equal footing”
Unlike W = −P∆V , where we can directly measure the change in volume, we do nottypically measure the change in entropy directly.
A more common form of the entropy equation Q = T ∆S is therefore
∆S =Q
T
Note that this expression holds for processes occurring at constant T
More generally, if T changes during the process (for example in the other thermodynamicprocesses we have studied) we can use
∆S =
∫ Q2
Q1
1
TdQ
This expression can be used to calculate entropy changes given measured heat changes dQand temperatures T
Note that in order to use this expression generally in computations, we will need to rewrite it
in a form that allows us to explicitly integrate, as we rewrote the expression∫ V2
V1P dV .
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 92 / 196
![Page 275: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/275.jpg)
Understanding heat: putting heat and work on an “equal footing”
Unlike W = −P∆V , where we can directly measure the change in volume, we do nottypically measure the change in entropy directly.
A more common form of the entropy equation Q = T ∆S is therefore
∆S =Q
T
Note that this expression holds for processes occurring at constant T
More generally, if T changes during the process (for example in the other thermodynamicprocesses we have studied) we can use
∆S =
∫ Q2
Q1
1
TdQ
This expression can be used to calculate entropy changes given measured heat changes dQand temperatures T
Note that in order to use this expression generally in computations, we will need to rewrite it
in a form that allows us to explicitly integrate, as we rewrote the expression∫ V2
V1P dV .
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 92 / 196
![Page 276: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/276.jpg)
Understanding heat: putting heat and work on an “equal footing”
Unlike W = −P∆V , where we can directly measure the change in volume, we do nottypically measure the change in entropy directly.
A more common form of the entropy equation Q = T ∆S is therefore
∆S =Q
T
Note that this expression holds for processes occurring at constant T
More generally, if T changes during the process (for example in the other thermodynamicprocesses we have studied) we can use
∆S =
∫ Q2
Q1
1
TdQ
This expression can be used to calculate entropy changes given measured heat changes dQand temperatures T
Note that in order to use this expression generally in computations, we will need to rewrite it
in a form that allows us to explicitly integrate, as we rewrote the expression∫ V2
V1P dV .
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 92 / 196
![Page 277: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/277.jpg)
Understanding heat: putting heat and work on an “equal footing”
Unlike W = −P∆V , where we can directly measure the change in volume, we do nottypically measure the change in entropy directly.
A more common form of the entropy equation Q = T ∆S is therefore
∆S =Q
T
Note that this expression holds for processes occurring at constant T
More generally, if T changes during the process (for example in the other thermodynamicprocesses we have studied) we can use
∆S =
∫ Q2
Q1
1
TdQ
This expression can be used to calculate entropy changes given measured heat changes dQand temperatures T
Note that in order to use this expression generally in computations, we will need to rewrite it
in a form that allows us to explicitly integrate, as we rewrote the expression∫ V2
V1P dV .
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 92 / 196
![Page 278: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/278.jpg)
Understanding heat: putting heat and work on an “equal footing”
Unlike W = −P∆V , where we can directly measure the change in volume, we do nottypically measure the change in entropy directly.
A more common form of the entropy equation Q = T ∆S is therefore
∆S =Q
T
Note that this expression holds for processes occurring at constant T
More generally, if T changes during the process (for example in the other thermodynamicprocesses we have studied) we can use
∆S =
∫ Q2
Q1
1
TdQ
This expression can be used to calculate entropy changes given measured heat changes dQand temperatures T
Note that in order to use this expression generally in computations, we will need to rewrite it
in a form that allows us to explicitly integrate, as we rewrote the expression∫ V2
V1P dV .
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 92 / 196
![Page 279: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/279.jpg)
Understanding heat: putting heat and work on an “equal footing”
Unlike W = −P∆V , where we can directly measure the change in volume, we do nottypically measure the change in entropy directly.
A more common form of the entropy equation Q = T ∆S is therefore
∆S =Q
T
Note that this expression holds for processes occurring at constant T
More generally, if T changes during the process (for example in the other thermodynamicprocesses we have studied) we can use
∆S =
∫ Q2
Q1
1
TdQ
This expression can be used to calculate entropy changes given measured heat changes dQand temperatures T
Note that in order to use this expression generally in computations, we will need to rewrite it
in a form that allows us to explicitly integrate, as we rewrote the expression∫ V2
V1P dV .
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 92 / 196
![Page 280: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/280.jpg)
Entropy change for an isovolumetric (isochoric) process
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 93 / 196
![Page 281: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/281.jpg)
Entropy change for an isovolumetric (isochoric) process
Now we will follow the total changes in entropy for interacting subsystems.
Consider entropy change in isovolumetric heat transfer to an ideal gas. We need to treat thesubsystem interacting with the gas on an equal footing. Let’s now assume the heat bath isnot so large, to its temperature can change during the interaction.
Assume the initial temperature of the gas is Ta and that of the water is Tb.
Track entropy changes of both system and surroundings (alternatively, treat them as twosubsystems composing a larger composite system).
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 94 / 196
![Page 282: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/282.jpg)
Entropy change for an isovolumetric (isochoric) process
Now we will follow the total changes in entropy for interacting subsystems.
Consider entropy change in isovolumetric heat transfer to an ideal gas. We need to treat thesubsystem interacting with the gas on an equal footing. Let’s now assume the heat bath isnot so large, to its temperature can change during the interaction.
Assume the initial temperature of the gas is Ta and that of the water is Tb.
Track entropy changes of both system and surroundings (alternatively, treat them as twosubsystems composing a larger composite system).
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 94 / 196
![Page 283: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/283.jpg)
Entropy change for an isovolumetric (isochoric) process
Now we will follow the total changes in entropy for interacting subsystems.
Consider entropy change in isovolumetric heat transfer to an ideal gas. We need to treat thesubsystem interacting with the gas on an equal footing. Let’s now assume the heat bath isnot so large, to its temperature can change during the interaction.
Assume the initial temperature of the gas is Ta and that of the water is Tb.
Track entropy changes of both system and surroundings (alternatively, treat them as twosubsystems composing a larger composite system).
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 94 / 196
![Page 284: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/284.jpg)
Entropy change for an isovolumetric (isochoric) process
Now we will follow the total changes in entropy for interacting subsystems.
Consider entropy change in isovolumetric heat transfer to an ideal gas. We need to treat thesubsystem interacting with the gas on an equal footing. Let’s now assume the heat bath isnot so large, to its temperature can change during the interaction.
Assume the initial temperature of the gas is Ta and that of the water is Tb.
Track entropy changes of both system and surroundings (alternatively, treat them as twosubsystems composing a larger composite system).
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 94 / 196
![Page 285: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/285.jpg)
Entropy change for an isovolumetric (isochoric) process
Now let’s calculate entropy changes for both the system (gas) and its surroundings (water).Call the system a and the surroundings b.
Let’s start by looking at the differential formulation: what is the change of the entropy of a)the system b) the surroundings for a small element of heat dQ passed between them?
dSa =1
TadQa
dSb =1
TbdQb
where Ta < Tb.
Note dQb = −dQa, with dQa > 0 since the heat liberated by the water is absorbed by thegas.
dStot = dSa + dSb =(
1Ta− 1
Tb
)dQa
Since Ta < Tb, and dQa > 0, we find dStot > 0. Thus the total entropy increases duringthe heat transfer.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 95 / 196
![Page 286: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/286.jpg)
Entropy change for an isovolumetric (isochoric) process
Now let’s calculate entropy changes for both the system (gas) and its surroundings (water).Call the system a and the surroundings b.
Let’s start by looking at the differential formulation: what is the change of the entropy of a)the system b) the surroundings for a small element of heat dQ passed between them?
dSa =1
TadQa
dSb =1
TbdQb
where Ta < Tb.
Note dQb = −dQa, with dQa > 0 since the heat liberated by the water is absorbed by thegas.
dStot = dSa + dSb =(
1Ta− 1
Tb
)dQa
Since Ta < Tb, and dQa > 0, we find dStot > 0. Thus the total entropy increases duringthe heat transfer.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 95 / 196
![Page 287: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/287.jpg)
Entropy change for an isovolumetric (isochoric) process
Now let’s calculate entropy changes for both the system (gas) and its surroundings (water).Call the system a and the surroundings b.
Let’s start by looking at the differential formulation: what is the change of the entropy of a)the system b) the surroundings for a small element of heat dQ passed between them?
dSa =1
TadQa
dSb =1
TbdQb
where Ta < Tb.
Note dQb = −dQa, with dQa > 0 since the heat liberated by the water is absorbed by thegas.
dStot = dSa + dSb =(
1Ta− 1
Tb
)dQa
Since Ta < Tb, and dQa > 0, we find dStot > 0. Thus the total entropy increases duringthe heat transfer.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 95 / 196
![Page 288: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/288.jpg)
Entropy change for an isovolumetric (isochoric) process
Now let’s calculate entropy changes for both the system (gas) and its surroundings (water).Call the system a and the surroundings b.
Let’s start by looking at the differential formulation: what is the change of the entropy of a)the system b) the surroundings for a small element of heat dQ passed between them?
dSa =1
TadQa
dSb =1
TbdQb
where Ta < Tb.
Note dQb = −dQa, with dQa > 0 since the heat liberated by the water is absorbed by thegas.
dStot = dSa + dSb =(
1Ta− 1
Tb
)dQa
Since Ta < Tb, and dQa > 0, we find dStot > 0. Thus the total entropy increases duringthe heat transfer.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 95 / 196
![Page 289: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/289.jpg)
Entropy change for an isovolumetric (isochoric) process
Now let’s calculate entropy changes for both the system (gas) and its surroundings (water).Call the system a and the surroundings b.
Let’s start by looking at the differential formulation: what is the change of the entropy of a)the system b) the surroundings for a small element of heat dQ passed between them?
dSa =1
TadQa
dSb =1
TbdQb
where Ta < Tb.
Note dQb = −dQa, with dQa > 0 since the heat liberated by the water is absorbed by thegas.
dStot = dSa + dSb =(
1Ta− 1
Tb
)dQa
Since Ta < Tb, and dQa > 0, we find dStot > 0. Thus the total entropy increases duringthe heat transfer.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 95 / 196
![Page 290: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/290.jpg)
Entropy change for an isovolumetric (isochoric) process
Now let’s carry out analogous calculations for the whole process of equilibration
General expression for computing entropy change in an isovolumetric process:
∆S =
∫ Q2
Q1
1
TdQ
= NCv
∫ T2
T1
1
TdT
In order to evaluate the integral, I need to express it in terms of a single variable, so I havesubstituted NCv dT = dQ (compare our previous experiences with such substitutions in workcomputations)
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 96 / 196
![Page 291: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/291.jpg)
Entropy change for an isovolumetric (isochoric) process
Now let’s carry out analogous calculations for the whole process of equilibration
General expression for computing entropy change in an isovolumetric process:
∆S =
∫ Q2
Q1
1
TdQ
= NCv
∫ T2
T1
1
TdT
In order to evaluate the integral, I need to express it in terms of a single variable, so I havesubstituted NCv dT = dQ (compare our previous experiences with such substitutions in workcomputations)
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 96 / 196
![Page 292: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/292.jpg)
Entropy change for an isovolumetric (isochoric) process
Now let’s carry out analogous calculations for the whole process of equilibration
General expression for computing entropy change in an isovolumetric process:
∆S =
∫ Q2
Q1
1
TdQ
= NCv
∫ T2
T1
1
TdT
In order to evaluate the integral, I need to express it in terms of a single variable, so I havesubstituted NCv dT = dQ (compare our previous experiences with such substitutions in workcomputations)
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 96 / 196
![Page 293: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/293.jpg)
Entropy change for an isovolumetric (isochoric) process
Entropy change for system:
∆Sa =
∫ Qa,2
Qa,1
1
TadQa
= NCv,a
∫ Ta,2
Ta,1
1
TadTa
Entropy change for surroundings:
∆Sb = NCv,b
∫ Tb,2
Tb,1
1
TbdTb
Note Ta,2 = Tb,2 since that is definition of thermal equilibrium
How do we compute T2? Just apply Qb = −Qa (energy balance for a+b) and write it interms of temperature:
Qb = −Qa
NCv , b(Tb,2 − Tb,1) = −NCv,a(Ta,2 − Ta,1)
NCv , b(T2 − Tb,1) = −NCv,a(T2 − Ta,1)
and solve for T2 in terms of info given.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 97 / 196
![Page 294: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/294.jpg)
Entropy change for an isovolumetric (isochoric) process
Entropy change for system:
∆Sa =
∫ Qa,2
Qa,1
1
TadQa
= NCv,a
∫ Ta,2
Ta,1
1
TadTa
Entropy change for surroundings:
∆Sb = NCv,b
∫ Tb,2
Tb,1
1
TbdTb
Note Ta,2 = Tb,2 since that is definition of thermal equilibrium
How do we compute T2? Just apply Qb = −Qa (energy balance for a+b) and write it interms of temperature:
Qb = −Qa
NCv , b(Tb,2 − Tb,1) = −NCv,a(Ta,2 − Ta,1)
NCv , b(T2 − Tb,1) = −NCv,a(T2 − Ta,1)
and solve for T2 in terms of info given.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 97 / 196
![Page 295: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/295.jpg)
Entropy change for an isovolumetric (isochoric) process
Entropy change for system:
∆Sa =
∫ Qa,2
Qa,1
1
TadQa
= NCv,a
∫ Ta,2
Ta,1
1
TadTa
Entropy change for surroundings:
∆Sb = NCv,b
∫ Tb,2
Tb,1
1
TbdTb
Note Ta,2 = Tb,2 since that is definition of thermal equilibrium
How do we compute T2? Just apply Qb = −Qa (energy balance for a+b) and write it interms of temperature:
Qb = −Qa
NCv , b(Tb,2 − Tb,1) = −NCv,a(Ta,2 − Ta,1)
NCv , b(T2 − Tb,1) = −NCv,a(T2 − Ta,1)
and solve for T2 in terms of info given.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 97 / 196
![Page 296: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/296.jpg)
Entropy change for an isovolumetric (isochoric) process
Entropy change for system:
∆Sa =
∫ Qa,2
Qa,1
1
TadQa
= NCv,a
∫ Ta,2
Ta,1
1
TadTa
Entropy change for surroundings:
∆Sb = NCv,b
∫ Tb,2
Tb,1
1
TbdTb
Note Ta,2 = Tb,2 since that is definition of thermal equilibrium
How do we compute T2? Just apply Qb = −Qa (energy balance for a+b) and write it interms of temperature:
Qb = −Qa
NCv , b(Tb,2 − Tb,1) = −NCv,a(Ta,2 − Ta,1)
NCv , b(T2 − Tb,1) = −NCv,a(T2 − Ta,1)
and solve for T2 in terms of info given.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 97 / 196
![Page 297: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/297.jpg)
Entropy change for an isovolumetric (isochoric) process
Entropy change for system:
∆Sa = NCv,a ln
(Ta,2
Ta,1
)= NCv,a (ln T2 − ln Ta,1)
Entropy change for surroundings:
∆Sb = NCv,b ln
(Tb,2
Tb,1
)= NCv,b
(ln Tb,2 − ln Tb,1
)= NCv,b
(ln T2 − ln Tb,1
)Assume for simplicity that Cv,a = Cv,b (we have also assumed same number of moles)
Total entropy change during thermal equilibration:
∆Stot = ∆Sa + ∆Sb
= NCv(2 ln T2 − ln Ta,1 − ln Tb,1
)> 0
You can verify the last line by plotting the quantities on the same set of axes
We know the total entropy change ∆Stot > 0 since each dStot > 0. But now we haveobtained a numerical value for the total entropy change during equilibration.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 98 / 196
![Page 298: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/298.jpg)
Entropy change for an isovolumetric (isochoric) process
Entropy change for system:
∆Sa = NCv,a ln
(Ta,2
Ta,1
)= NCv,a (ln T2 − ln Ta,1)
Entropy change for surroundings:
∆Sb = NCv,b ln
(Tb,2
Tb,1
)= NCv,b
(ln Tb,2 − ln Tb,1
)= NCv,b
(ln T2 − ln Tb,1
)
Assume for simplicity that Cv,a = Cv,b (we have also assumed same number of moles)
Total entropy change during thermal equilibration:
∆Stot = ∆Sa + ∆Sb
= NCv(2 ln T2 − ln Ta,1 − ln Tb,1
)> 0
You can verify the last line by plotting the quantities on the same set of axes
We know the total entropy change ∆Stot > 0 since each dStot > 0. But now we haveobtained a numerical value for the total entropy change during equilibration.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 98 / 196
![Page 299: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/299.jpg)
Entropy change for an isovolumetric (isochoric) process
Entropy change for system:
∆Sa = NCv,a ln
(Ta,2
Ta,1
)= NCv,a (ln T2 − ln Ta,1)
Entropy change for surroundings:
∆Sb = NCv,b ln
(Tb,2
Tb,1
)= NCv,b
(ln Tb,2 − ln Tb,1
)= NCv,b
(ln T2 − ln Tb,1
)Assume for simplicity that Cv,a = Cv,b (we have also assumed same number of moles)
Total entropy change during thermal equilibration:
∆Stot = ∆Sa + ∆Sb
= NCv(2 ln T2 − ln Ta,1 − ln Tb,1
)> 0
You can verify the last line by plotting the quantities on the same set of axes
We know the total entropy change ∆Stot > 0 since each dStot > 0. But now we haveobtained a numerical value for the total entropy change during equilibration.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 98 / 196
![Page 300: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/300.jpg)
Entropy change for an isovolumetric (isochoric) process
Entropy change for system:
∆Sa = NCv,a ln
(Ta,2
Ta,1
)= NCv,a (ln T2 − ln Ta,1)
Entropy change for surroundings:
∆Sb = NCv,b ln
(Tb,2
Tb,1
)= NCv,b
(ln Tb,2 − ln Tb,1
)= NCv,b
(ln T2 − ln Tb,1
)Assume for simplicity that Cv,a = Cv,b (we have also assumed same number of moles)
Total entropy change during thermal equilibration:
∆Stot = ∆Sa + ∆Sb
= NCv(2 ln T2 − ln Ta,1 − ln Tb,1
)> 0
You can verify the last line by plotting the quantities on the same set of axes
We know the total entropy change ∆Stot > 0 since each dStot > 0. But now we haveobtained a numerical value for the total entropy change during equilibration.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 98 / 196
![Page 301: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/301.jpg)
Entropy change for an isovolumetric (isochoric) process
Entropy change for system:
∆Sa = NCv,a ln
(Ta,2
Ta,1
)= NCv,a (ln T2 − ln Ta,1)
Entropy change for surroundings:
∆Sb = NCv,b ln
(Tb,2
Tb,1
)= NCv,b
(ln Tb,2 − ln Tb,1
)= NCv,b
(ln T2 − ln Tb,1
)Assume for simplicity that Cv,a = Cv,b (we have also assumed same number of moles)
Total entropy change during thermal equilibration:
∆Stot = ∆Sa + ∆Sb
= NCv(2 ln T2 − ln Ta,1 − ln Tb,1
)> 0
You can verify the last line by plotting the quantities on the same set of axes
We know the total entropy change ∆Stot > 0 since each dStot > 0. But now we haveobtained a numerical value for the total entropy change during equilibration.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 98 / 196
![Page 302: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/302.jpg)
Entropy change for an isovolumetric (isochoric) process
Entropy change for system:
∆Sa = NCv,a ln
(Ta,2
Ta,1
)= NCv,a (ln T2 − ln Ta,1)
Entropy change for surroundings:
∆Sb = NCv,b ln
(Tb,2
Tb,1
)= NCv,b
(ln Tb,2 − ln Tb,1
)= NCv,b
(ln T2 − ln Tb,1
)Assume for simplicity that Cv,a = Cv,b (we have also assumed same number of moles)
Total entropy change during thermal equilibration:
∆Stot = ∆Sa + ∆Sb
= NCv(2 ln T2 − ln Ta,1 − ln Tb,1
)> 0
You can verify the last line by plotting the quantities on the same set of axes
We know the total entropy change ∆Stot > 0 since each dStot > 0. But now we haveobtained a numerical value for the total entropy change during equilibration.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 98 / 196
![Page 303: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/303.jpg)
The key to the above analysis of why total entropy increases lies in the equation
dStot = dSa + dSb =(
1Ta− 1
Tb
)dQa; the rest was just application of energy balance and
integration
Net entropy change may be considered “driving force” in this example, instead oftemperature difference, since we can look at driving force from perspective of extensiverather than intensive variables.
From this perspective, the reason heat flow stops when two subsystems reach the sametemperature is that there would be no increase of entropy from further passage of heatbetween the two subsystems
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 99 / 196
![Page 304: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/304.jpg)
The key to the above analysis of why total entropy increases lies in the equation
dStot = dSa + dSb =(
1Ta− 1
Tb
)dQa; the rest was just application of energy balance and
integration
Net entropy change may be considered “driving force” in this example, instead oftemperature difference, since we can look at driving force from perspective of extensiverather than intensive variables.
From this perspective, the reason heat flow stops when two subsystems reach the sametemperature is that there would be no increase of entropy from further passage of heatbetween the two subsystems
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 99 / 196
![Page 305: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/305.jpg)
The key to the above analysis of why total entropy increases lies in the equation
dStot = dSa + dSb =(
1Ta− 1
Tb
)dQa; the rest was just application of energy balance and
integration
Net entropy change may be considered “driving force” in this example, instead oftemperature difference, since we can look at driving force from perspective of extensiverather than intensive variables.
From this perspective, the reason heat flow stops when two subsystems reach the sametemperature is that there would be no increase of entropy from further passage of heatbetween the two subsystems
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 99 / 196
![Page 306: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/306.jpg)
Entropy, spontaneity and the second law of thermodynamics
Finite difference in intensive variables leads to -net- increase in the extensive variableentropy, once the systems have reached equilibrium
Thus for any spontaneous process (one initiated by a finite difference in intensive variables),there is a net entropy increase.
Second law of thermodynamics: in any spontaneous process, net entropy increases
In general,∆Stot ≥ 0, with equality only for a reversible process (one that occurs infinitelyslowly).
Must keep track of entropy changes of all subsystems involved, unlike in our earlier work
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 100 / 196
![Page 307: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/307.jpg)
Entropy, spontaneity and the second law of thermodynamics
Finite difference in intensive variables leads to -net- increase in the extensive variableentropy, once the systems have reached equilibrium
Thus for any spontaneous process (one initiated by a finite difference in intensive variables),there is a net entropy increase.
Second law of thermodynamics: in any spontaneous process, net entropy increases
In general,∆Stot ≥ 0, with equality only for a reversible process (one that occurs infinitelyslowly).
Must keep track of entropy changes of all subsystems involved, unlike in our earlier work
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 100 / 196
![Page 308: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/308.jpg)
Entropy, spontaneity and the second law of thermodynamics
Finite difference in intensive variables leads to -net- increase in the extensive variableentropy, once the systems have reached equilibrium
Thus for any spontaneous process (one initiated by a finite difference in intensive variables),there is a net entropy increase.
Second law of thermodynamics: in any spontaneous process, net entropy increases
In general,∆Stot ≥ 0, with equality only for a reversible process (one that occurs infinitelyslowly).
Must keep track of entropy changes of all subsystems involved, unlike in our earlier work
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 100 / 196
![Page 309: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/309.jpg)
Entropy, spontaneity and the second law of thermodynamics
Finite difference in intensive variables leads to -net- increase in the extensive variableentropy, once the systems have reached equilibrium
Thus for any spontaneous process (one initiated by a finite difference in intensive variables),there is a net entropy increase.
Second law of thermodynamics: in any spontaneous process, net entropy increases
In general,∆Stot ≥ 0, with equality only for a reversible process (one that occurs infinitelyslowly).
Must keep track of entropy changes of all subsystems involved, unlike in our earlier work
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 100 / 196
![Page 310: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/310.jpg)
Entropy, spontaneity and the second law of thermodynamics
Finite difference in intensive variables leads to -net- increase in the extensive variableentropy, once the systems have reached equilibrium
Thus for any spontaneous process (one initiated by a finite difference in intensive variables),there is a net entropy increase.
Second law of thermodynamics: in any spontaneous process, net entropy increases
In general,∆Stot ≥ 0, with equality only for a reversible process (one that occurs infinitelyslowly).
Must keep track of entropy changes of all subsystems involved, unlike in our earlier work
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 100 / 196
![Page 311: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/311.jpg)
Putting heat and work on an equal footing (cont’d)
Let’s return to the similarities (and differences) between heat and work
Recall we said that S is the extensive variable associated with heat, just as V is the extensivevariable associated with work
So does the same analysis we did above apply to volume V ?
Recall this example of a spontaneous process: V1 increases, V2 decreases, but the totalvolume change ∆V = 0. So why the difference between S and V ?
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 101 / 196
![Page 312: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/312.jpg)
Putting heat and work on an equal footing (cont’d)
Let’s return to the similarities (and differences) between heat and work
Recall we said that S is the extensive variable associated with heat, just as V is the extensivevariable associated with work
So does the same analysis we did above apply to volume V ?
Recall this example of a spontaneous process: V1 increases, V2 decreases, but the totalvolume change ∆V = 0. So why the difference between S and V ?
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 101 / 196
![Page 313: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/313.jpg)
Putting heat and work on an equal footing (cont’d)
Let’s return to the similarities (and differences) between heat and work
Recall we said that S is the extensive variable associated with heat, just as V is the extensivevariable associated with work
So does the same analysis we did above apply to volume V ?
Recall this example of a spontaneous process: V1 increases, V2 decreases, but the totalvolume change ∆V = 0. So why the difference between S and V ?
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 101 / 196
![Page 314: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/314.jpg)
Putting heat and work on an equal footing (cont’d)
Let’s return to the similarities (and differences) between heat and work
Recall we said that S is the extensive variable associated with heat, just as V is the extensivevariable associated with work
So does the same analysis we did above apply to volume V ?
Recall this example of a spontaneous process: V1 increases, V2 decreases, but the totalvolume change ∆V = 0. So why the difference between S and V ?
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 101 / 196
![Page 315: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/315.jpg)
Putting heat and work on an “equal” footing: differences between S and V
The reason for the difference between Stot and Vtot - namely, that Stot must increase for areal process whereas Vtot need not - is that there are no equilibrium values of V1 and V2 foran irreversible process, until heat is liberated.
Thus, until heat is liberated, there are no equilibrium values of ∆V1 and ∆V2.
Note in our example of an irreversible process, P1 > P2 implied that the piston wasaccelerated and took on kinetic energy. Only due to friction did the piston stop atequilibrium values of V1,V2.
Through the liberation of heat due to friction, ∆V1 + ∆V2 = 0 at equilibrium.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 102 / 196
![Page 316: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/316.jpg)
Putting heat and work on an “equal” footing: differences between S and V
The reason for the difference between Stot and Vtot - namely, that Stot must increase for areal process whereas Vtot need not - is that there are no equilibrium values of V1 and V2 foran irreversible process, until heat is liberated.
Thus, until heat is liberated, there are no equilibrium values of ∆V1 and ∆V2.
Note in our example of an irreversible process, P1 > P2 implied that the piston wasaccelerated and took on kinetic energy. Only due to friction did the piston stop atequilibrium values of V1,V2.
Through the liberation of heat due to friction, ∆V1 + ∆V2 = 0 at equilibrium.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 102 / 196
![Page 317: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/317.jpg)
Putting heat and work on an “equal” footing: differences between S and V
The reason for the difference between Stot and Vtot - namely, that Stot must increase for areal process whereas Vtot need not - is that there are no equilibrium values of V1 and V2 foran irreversible process, until heat is liberated.
Thus, until heat is liberated, there are no equilibrium values of ∆V1 and ∆V2.
Note in our example of an irreversible process, P1 > P2 implied that the piston wasaccelerated and took on kinetic energy. Only due to friction did the piston stop atequilibrium values of V1,V2.
Through the liberation of heat due to friction, ∆V1 + ∆V2 = 0 at equilibrium.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 102 / 196
![Page 318: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/318.jpg)
Putting heat and work on an “equal” footing: differences between S and V
The reason for the difference between Stot and Vtot - namely, that Stot must increase for areal process whereas Vtot need not - is that there are no equilibrium values of V1 and V2 foran irreversible process, until heat is liberated.
Thus, until heat is liberated, there are no equilibrium values of ∆V1 and ∆V2.
Note in our example of an irreversible process, P1 > P2 implied that the piston wasaccelerated and took on kinetic energy. Only due to friction did the piston stop atequilibrium values of V1,V2.
Through the liberation of heat due to friction, ∆V1 + ∆V2 = 0 at equilibrium.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 102 / 196
![Page 319: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/319.jpg)
Putting heat and work on an “equal” footing: differences between S and V
The liberated heat due to friction increases the entropy of the universe. It is the “price wepay” for ∆V2 + ∆V1 = 0.
By contrast, for a process of thermal equilibration, none of the energy is converted toanother form in this way - all energy exchange is in the form of heat.
Whereas in the irreversible mechanical equilibration process |W1| > |W2|, for the thermalequilibration process, |Q1| = |Q2|.It is for this reason that ∆Stot = ∆S1 + ∆S2 > 0 for the real thermal equilibration processwe studied.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 103 / 196
![Page 320: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/320.jpg)
Putting heat and work on an “equal” footing: differences between S and V
The liberated heat due to friction increases the entropy of the universe. It is the “price wepay” for ∆V2 + ∆V1 = 0.
By contrast, for a process of thermal equilibration, none of the energy is converted toanother form in this way - all energy exchange is in the form of heat.
Whereas in the irreversible mechanical equilibration process |W1| > |W2|, for the thermalequilibration process, |Q1| = |Q2|.It is for this reason that ∆Stot = ∆S1 + ∆S2 > 0 for the real thermal equilibration processwe studied.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 103 / 196
![Page 321: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/321.jpg)
Putting heat and work on an “equal” footing: differences between S and V
The liberated heat due to friction increases the entropy of the universe. It is the “price wepay” for ∆V2 + ∆V1 = 0.
By contrast, for a process of thermal equilibration, none of the energy is converted toanother form in this way - all energy exchange is in the form of heat.
Whereas in the irreversible mechanical equilibration process |W1| > |W2|, for the thermalequilibration process, |Q1| = |Q2|.
It is for this reason that ∆Stot = ∆S1 + ∆S2 > 0 for the real thermal equilibration processwe studied.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 103 / 196
![Page 322: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/322.jpg)
Putting heat and work on an “equal” footing: differences between S and V
The liberated heat due to friction increases the entropy of the universe. It is the “price wepay” for ∆V2 + ∆V1 = 0.
By contrast, for a process of thermal equilibration, none of the energy is converted toanother form in this way - all energy exchange is in the form of heat.
Whereas in the irreversible mechanical equilibration process |W1| > |W2|, for the thermalequilibration process, |Q1| = |Q2|.It is for this reason that ∆Stot = ∆S1 + ∆S2 > 0 for the real thermal equilibration processwe studied.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 103 / 196
![Page 323: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/323.jpg)
Putting heat and work on an “equal” footing: differences between P and T
Recall that P is the intensive variable associated with work, while T is the intensive variableassociated with heat
However, recall that we had a definition of P from mechanics, whereas we had to define Tindirectly
So, as noted, it is more natural to consider the driving force for thermal equilibration to beincrease in Stot , whereas it is more natural to consider the driving force for mechanicalequilibration to be elimination of the pressure gradient so P1 = P2
But in general, equilibration is associated with elimination of differences between the valuesof intensive variables in interacting subsystems.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 104 / 196
![Page 324: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/324.jpg)
Putting heat and work on an “equal” footing: differences between P and T
Recall that P is the intensive variable associated with work, while T is the intensive variableassociated with heat
However, recall that we had a definition of P from mechanics, whereas we had to define Tindirectly
So, as noted, it is more natural to consider the driving force for thermal equilibration to beincrease in Stot , whereas it is more natural to consider the driving force for mechanicalequilibration to be elimination of the pressure gradient so P1 = P2
But in general, equilibration is associated with elimination of differences between the valuesof intensive variables in interacting subsystems.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 104 / 196
![Page 325: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/325.jpg)
Putting heat and work on an “equal” footing: differences between P and T
Recall that P is the intensive variable associated with work, while T is the intensive variableassociated with heat
However, recall that we had a definition of P from mechanics, whereas we had to define Tindirectly
So, as noted, it is more natural to consider the driving force for thermal equilibration to beincrease in Stot , whereas it is more natural to consider the driving force for mechanicalequilibration to be elimination of the pressure gradient so P1 = P2
But in general, equilibration is associated with elimination of differences between the valuesof intensive variables in interacting subsystems.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 104 / 196
![Page 326: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/326.jpg)
Putting heat and work on an “equal” footing: differences between P and T
Recall that P is the intensive variable associated with work, while T is the intensive variableassociated with heat
However, recall that we had a definition of P from mechanics, whereas we had to define Tindirectly
So, as noted, it is more natural to consider the driving force for thermal equilibration to beincrease in Stot , whereas it is more natural to consider the driving force for mechanicalequilibration to be elimination of the pressure gradient so P1 = P2
But in general, equilibration is associated with elimination of differences between the valuesof intensive variables in interacting subsystems.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 104 / 196
![Page 327: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/327.jpg)
Entropy change example calculations: isothermal process
Now continuing our reassessment of the pictures we’ve drawn, let’s calculate entropychanges for both the system (gas) and its surroundings (water) in an isothermal process.Call the system a and the bath b.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 105 / 196
![Page 328: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/328.jpg)
Entropy change example calculations: isothermal process
Let’s start by looking at the differential formulation: what is the change of the entropy of a)the system b) the surroundings for a small element of heat dQ passed between them?
dSa =1
T0dQa
dSb =1
T0dQb
Note dQb = −dQa, with dQa > 0 since the heat liberated by the water is absorbed by thegas.
dStot = dSa + dSb =(
1T0− 1
T0
)dQa = 0
So as long as the temperature during the process does in fact remain constant at all times,there is no net increase of entropy. Bear in mind that the entropy of the system andsurroundings do change, but the net change is zero.
But note that in our picture, if we suddenly remove the clamp, the gas will expand quicklyand hence take on kinetic energy, as we showed. Thus entropy will increase due to heatliberated from friction in our picture.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 106 / 196
![Page 329: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/329.jpg)
Entropy change example calculations: isothermal process
Let’s start by looking at the differential formulation: what is the change of the entropy of a)the system b) the surroundings for a small element of heat dQ passed between them?
dSa =1
T0dQa
dSb =1
T0dQb
Note dQb = −dQa, with dQa > 0 since the heat liberated by the water is absorbed by thegas.
dStot = dSa + dSb =(
1T0− 1
T0
)dQa = 0
So as long as the temperature during the process does in fact remain constant at all times,there is no net increase of entropy. Bear in mind that the entropy of the system andsurroundings do change, but the net change is zero.
But note that in our picture, if we suddenly remove the clamp, the gas will expand quicklyand hence take on kinetic energy, as we showed. Thus entropy will increase due to heatliberated from friction in our picture.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 106 / 196
![Page 330: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/330.jpg)
Entropy change example calculations: isothermal process
Let’s start by looking at the differential formulation: what is the change of the entropy of a)the system b) the surroundings for a small element of heat dQ passed between them?
dSa =1
T0dQa
dSb =1
T0dQb
Note dQb = −dQa, with dQa > 0 since the heat liberated by the water is absorbed by thegas.
dStot = dSa + dSb =(
1T0− 1
T0
)dQa = 0
So as long as the temperature during the process does in fact remain constant at all times,there is no net increase of entropy. Bear in mind that the entropy of the system andsurroundings do change, but the net change is zero.
But note that in our picture, if we suddenly remove the clamp, the gas will expand quicklyand hence take on kinetic energy, as we showed. Thus entropy will increase due to heatliberated from friction in our picture.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 106 / 196
![Page 331: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/331.jpg)
Entropy change example calculations: isothermal process
Let’s start by looking at the differential formulation: what is the change of the entropy of a)the system b) the surroundings for a small element of heat dQ passed between them?
dSa =1
T0dQa
dSb =1
T0dQb
Note dQb = −dQa, with dQa > 0 since the heat liberated by the water is absorbed by thegas.
dStot = dSa + dSb =(
1T0− 1
T0
)dQa = 0
So as long as the temperature during the process does in fact remain constant at all times,there is no net increase of entropy. Bear in mind that the entropy of the system andsurroundings do change, but the net change is zero.
But note that in our picture, if we suddenly remove the clamp, the gas will expand quicklyand hence take on kinetic energy, as we showed. Thus entropy will increase due to heatliberated from friction in our picture.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 106 / 196
![Page 332: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/332.jpg)
Entropy change example calculations: adiabatic process
Now let’s consider the related adiabatic expansion process (make the cylinder well-insulated).
Recall that Q = 0 for an adiabatic process. This immediately tells us that ∆Sa = 0 (there isno change of entropy of the system). ∆Sb is also 0.
For this reason, a (reversible) adiabatic process is also said to be isentropic. Note isentropicrefers to the system, not the system + surroundings.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 107 / 196
![Page 333: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/333.jpg)
Entropy change example calculations: adiabatic process
Now let’s consider the related adiabatic expansion process (make the cylinder well-insulated).
Recall that Q = 0 for an adiabatic process. This immediately tells us that ∆Sa = 0 (there isno change of entropy of the system). ∆Sb is also 0.
For this reason, a (reversible) adiabatic process is also said to be isentropic. Note isentropicrefers to the system, not the system + surroundings.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 107 / 196
![Page 334: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/334.jpg)
Entropy change example calculations: adiabatic process
Now let’s consider the related adiabatic expansion process (make the cylinder well-insulated).
Recall that Q = 0 for an adiabatic process. This immediately tells us that ∆Sa = 0 (there isno change of entropy of the system). ∆Sb is also 0.
For this reason, a (reversible) adiabatic process is also said to be isentropic. Note isentropicrefers to the system, not the system + surroundings.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 107 / 196
![Page 335: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/335.jpg)
Entropy change example calculations: adiabatic process
In the adiabatic process Qrev = 0; unlike the isothermal case, there is no entropy change dueto heat transfer in either the system or surroundings
But note that as with the isothermal process, if the expansion occurs irreversibly (i.e., at afinite rate, as all real processes do), there will be heat liberated due to friction and hence∆Stot > 0.
The irreversibility originates in the finite difference in the intensive variable P upon releasingthe clamp.
In problems, the focus will be on calculating entropy changes due to heat transfer (notfriction), as you saw in the homework
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 108 / 196
![Page 336: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/336.jpg)
Entropy change example calculations: adiabatic process
In the adiabatic process Qrev = 0; unlike the isothermal case, there is no entropy change dueto heat transfer in either the system or surroundings
But note that as with the isothermal process, if the expansion occurs irreversibly (i.e., at afinite rate, as all real processes do), there will be heat liberated due to friction and hence∆Stot > 0.
The irreversibility originates in the finite difference in the intensive variable P upon releasingthe clamp.
In problems, the focus will be on calculating entropy changes due to heat transfer (notfriction), as you saw in the homework
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 108 / 196
![Page 337: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/337.jpg)
Entropy change example calculations: adiabatic process
In the adiabatic process Qrev = 0; unlike the isothermal case, there is no entropy change dueto heat transfer in either the system or surroundings
But note that as with the isothermal process, if the expansion occurs irreversibly (i.e., at afinite rate, as all real processes do), there will be heat liberated due to friction and hence∆Stot > 0.
The irreversibility originates in the finite difference in the intensive variable P upon releasingthe clamp.
In problems, the focus will be on calculating entropy changes due to heat transfer (notfriction), as you saw in the homework
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 108 / 196
![Page 338: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/338.jpg)
Entropy change example calculations: adiabatic process
In the adiabatic process Qrev = 0; unlike the isothermal case, there is no entropy change dueto heat transfer in either the system or surroundings
But note that as with the isothermal process, if the expansion occurs irreversibly (i.e., at afinite rate, as all real processes do), there will be heat liberated due to friction and hence∆Stot > 0.
The irreversibility originates in the finite difference in the intensive variable P upon releasingthe clamp.
In problems, the focus will be on calculating entropy changes due to heat transfer (notfriction), as you saw in the homework
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 108 / 196
![Page 339: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/339.jpg)
Entropy change example calculations: isobaric process
What about an isobaric process?
How does entropy change of the gas in an isobaric heating compare to that in anisovolumetric heating of the gas?What is the expression for the entropy change of the gas?
∆Sa = NCp,a
∫ Ta,2
Ta,1
1
TadTa
Since more heat is transferred in the isobaric heating, for the same change in temperature,∆Sa is greaterThese heatings are irreversible as we have framed them because we have indicated that afinite difference in the intensive variable T initiated the change.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 109 / 196
![Page 340: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/340.jpg)
Entropy change example calculations: isobaric process
What about an isobaric process?How does entropy change of the gas in an isobaric heating compare to that in anisovolumetric heating of the gas?
What is the expression for the entropy change of the gas?
∆Sa = NCp,a
∫ Ta,2
Ta,1
1
TadTa
Since more heat is transferred in the isobaric heating, for the same change in temperature,∆Sa is greaterThese heatings are irreversible as we have framed them because we have indicated that afinite difference in the intensive variable T initiated the change.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 109 / 196
![Page 341: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/341.jpg)
Entropy change example calculations: isobaric process
What about an isobaric process?How does entropy change of the gas in an isobaric heating compare to that in anisovolumetric heating of the gas?What is the expression for the entropy change of the gas?
∆Sa = NCp,a
∫ Ta,2
Ta,1
1
TadTa
Since more heat is transferred in the isobaric heating, for the same change in temperature,∆Sa is greaterThese heatings are irreversible as we have framed them because we have indicated that afinite difference in the intensive variable T initiated the change.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 109 / 196
![Page 342: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/342.jpg)
Entropy change example calculations: isobaric process
What about an isobaric process?How does entropy change of the gas in an isobaric heating compare to that in anisovolumetric heating of the gas?What is the expression for the entropy change of the gas?
∆Sa = NCp,a
∫ Ta,2
Ta,1
1
TadTa
Since more heat is transferred in the isobaric heating, for the same change in temperature,∆Sa is greater
These heatings are irreversible as we have framed them because we have indicated that afinite difference in the intensive variable T initiated the change.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 109 / 196
![Page 343: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/343.jpg)
Entropy change example calculations: isobaric process
What about an isobaric process?How does entropy change of the gas in an isobaric heating compare to that in anisovolumetric heating of the gas?What is the expression for the entropy change of the gas?
∆Sa = NCp,a
∫ Ta,2
Ta,1
1
TadTa
Since more heat is transferred in the isobaric heating, for the same change in temperature,∆Sa is greaterThese heatings are irreversible as we have framed them because we have indicated that afinite difference in the intensive variable T initiated the change.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 109 / 196
![Page 344: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/344.jpg)
Outline
1 What is Thermodynamics?
2 Some Thermodynamics Terminology
3 Basic concepts of thermodynamics
4 Thermodynamic equations of state
5 Conservation of Mass
6 Integral formulation of mass balance
7 Multicomponent mass balance
8 Conservation of energyEnergy balance
9 Towards the 2nd Law of Thermodynamics
10 Toward engineering applications: thermodynamic cycles and heat engines
11 Thermodynamic properties of real substances (not ideal gases)Computation of heat and work for thermodynamic processes involving nonideal substancesComputation of entropy changes for thermodynamic processes involving nonideal substances
12 Outline of remaining topics and schedule
13 Further analysis of the behavior of real gases
14 Phase equilibrium
15 More on Gibbs free energy and applications to phase equilibrium
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 110 / 196
![Page 345: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/345.jpg)
What are these processes useful for?
Isovolumetric heating - constant V (extensive)
Isobaric heating - constant P (intensive)
Adiabatic (isentropic) expansion - constant S (extensive)
Isothermal expansion - constant T (intensive)
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 111 / 196
![Page 346: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/346.jpg)
Analogies between isovolumetric and isentropic processes
Isovolumetric heating - constant V (extensive) - W = 0 since W = −P∆V and ∆V = 0
Isobaric heating - constant P (intensive)
Adiabatic (isentropic) expansion - constant S (extensive) - Q = 0 since Q = −T ∆S and∆S = 0
Isothermal expansion - constant T (intensive)
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 112 / 196
![Page 347: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/347.jpg)
Analogies between isovolumetric and isentropic processes
Isovolumetric heating - constant V (extensive) - W = 0 since W = −P∆V and ∆V = 0
Isobaric heating - constant P (intensive)
Adiabatic (isentropic) expansion - constant S (extensive) - Q = 0 since Q = −T ∆S and∆S = 0
Isothermal expansion - constant T (intensive)
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 112 / 196
![Page 348: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/348.jpg)
Analogies between isovolumetric and isentropic processes
Isovolumetric heating - constant V (extensive) - W = 0 since W = −P∆V and ∆V = 0
Isobaric heating - constant P (intensive)
Adiabatic (isentropic) expansion - constant S (extensive) - Q = 0 since Q = −T ∆S and∆S = 0
Isothermal expansion - constant T (intensive)
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 112 / 196
![Page 349: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/349.jpg)
Analogies between isovolumetric and isentropic processes
Isovolumetric heating - constant V (extensive) - W = 0 since W = −P∆V and ∆V = 0
Isobaric heating - constant P (intensive)
Adiabatic (isentropic) expansion - constant S (extensive) - Q = 0 since Q = −T ∆S and∆S = 0
Isothermal expansion - constant T (intensive)
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 112 / 196
![Page 350: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/350.jpg)
Heat engines and thermodynamic cycles
We have studied multistep thermodynamic processes
A thermodynamic cycle is one that starts and stops at the same state (combination of statevariables)
They are used in heat engines, which convert thermal energy into useful mechanical energy(work)
In a heat engine, we want the system to return to its original state so it can repeat the samesteps over and over
An engine operating reversibly will be most efficient at converting thermal energy to usefulwork (recall the reversible isothermal expansion example)
Heat engines can be fully understood by direct application of the methods we have learned
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 113 / 196
![Page 351: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/351.jpg)
Heat engines and thermodynamic cycles
We have studied multistep thermodynamic processes
A thermodynamic cycle is one that starts and stops at the same state (combination of statevariables)
They are used in heat engines, which convert thermal energy into useful mechanical energy(work)
In a heat engine, we want the system to return to its original state so it can repeat the samesteps over and over
An engine operating reversibly will be most efficient at converting thermal energy to usefulwork (recall the reversible isothermal expansion example)
Heat engines can be fully understood by direct application of the methods we have learned
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 113 / 196
![Page 352: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/352.jpg)
Heat engines and thermodynamic cycles
We have studied multistep thermodynamic processes
A thermodynamic cycle is one that starts and stops at the same state (combination of statevariables)
They are used in heat engines, which convert thermal energy into useful mechanical energy(work)
In a heat engine, we want the system to return to its original state so it can repeat the samesteps over and over
An engine operating reversibly will be most efficient at converting thermal energy to usefulwork (recall the reversible isothermal expansion example)
Heat engines can be fully understood by direct application of the methods we have learned
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 113 / 196
![Page 353: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/353.jpg)
Heat engines and thermodynamic cycles
We have studied multistep thermodynamic processes
A thermodynamic cycle is one that starts and stops at the same state (combination of statevariables)
They are used in heat engines, which convert thermal energy into useful mechanical energy(work)
In a heat engine, we want the system to return to its original state so it can repeat the samesteps over and over
An engine operating reversibly will be most efficient at converting thermal energy to usefulwork (recall the reversible isothermal expansion example)
Heat engines can be fully understood by direct application of the methods we have learned
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 113 / 196
![Page 354: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/354.jpg)
Heat engines and thermodynamic cycles
We have studied multistep thermodynamic processes
A thermodynamic cycle is one that starts and stops at the same state (combination of statevariables)
They are used in heat engines, which convert thermal energy into useful mechanical energy(work)
In a heat engine, we want the system to return to its original state so it can repeat the samesteps over and over
An engine operating reversibly will be most efficient at converting thermal energy to usefulwork (recall the reversible isothermal expansion example)
Heat engines can be fully understood by direct application of the methods we have learned
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 113 / 196
![Page 355: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/355.jpg)
Heat engines and thermodynamic cycles
We have studied multistep thermodynamic processes
A thermodynamic cycle is one that starts and stops at the same state (combination of statevariables)
They are used in heat engines, which convert thermal energy into useful mechanical energy(work)
In a heat engine, we want the system to return to its original state so it can repeat the samesteps over and over
An engine operating reversibly will be most efficient at converting thermal energy to usefulwork (recall the reversible isothermal expansion example)
Heat engines can be fully understood by direct application of the methods we have learned
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 113 / 196
![Page 356: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/356.jpg)
Heat engines and thermodynamic cycles (cont’d)
We need heat baths to accept and provide heat.
How should we design the cycle? Which processes should be used?
Note that if the cycle has just two steps, it will not do any net work
Consider cycles with 4 steps. What processes should be used to minimize entropyproduction?
Avoid the heating processes we introduced, since they increase entropy due to heat transfer
We introduced reversible isothermal and adiabatic processes: let’s see how these might beused
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 114 / 196
![Page 357: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/357.jpg)
Heat engines and thermodynamic cycles (cont’d)
We need heat baths to accept and provide heat.
How should we design the cycle? Which processes should be used?
Note that if the cycle has just two steps, it will not do any net work
Consider cycles with 4 steps. What processes should be used to minimize entropyproduction?
Avoid the heating processes we introduced, since they increase entropy due to heat transfer
We introduced reversible isothermal and adiabatic processes: let’s see how these might beused
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 114 / 196
![Page 358: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/358.jpg)
Heat engines and thermodynamic cycles (cont’d)
We need heat baths to accept and provide heat.
How should we design the cycle? Which processes should be used?
Note that if the cycle has just two steps, it will not do any net work
Consider cycles with 4 steps. What processes should be used to minimize entropyproduction?
Avoid the heating processes we introduced, since they increase entropy due to heat transfer
We introduced reversible isothermal and adiabatic processes: let’s see how these might beused
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 114 / 196
![Page 359: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/359.jpg)
Heat engines and thermodynamic cycles (cont’d)
We need heat baths to accept and provide heat.
How should we design the cycle? Which processes should be used?
Note that if the cycle has just two steps, it will not do any net work
Consider cycles with 4 steps. What processes should be used to minimize entropyproduction?
Avoid the heating processes we introduced, since they increase entropy due to heat transfer
We introduced reversible isothermal and adiabatic processes: let’s see how these might beused
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 114 / 196
![Page 360: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/360.jpg)
Heat engines and thermodynamic cycles (cont’d)
We need heat baths to accept and provide heat.
How should we design the cycle? Which processes should be used?
Note that if the cycle has just two steps, it will not do any net work
Consider cycles with 4 steps. What processes should be used to minimize entropyproduction?
Avoid the heating processes we introduced, since they increase entropy due to heat transfer
We introduced reversible isothermal and adiabatic processes: let’s see how these might beused
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 114 / 196
![Page 361: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/361.jpg)
Heat engines and thermodynamic cycles (cont’d)
We need heat baths to accept and provide heat.
How should we design the cycle? Which processes should be used?
Note that if the cycle has just two steps, it will not do any net work
Consider cycles with 4 steps. What processes should be used to minimize entropyproduction?
Avoid the heating processes we introduced, since they increase entropy due to heat transfer
We introduced reversible isothermal and adiabatic processes: let’s see how these might beused
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 114 / 196
![Page 362: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/362.jpg)
Graphical depiction of work out and heat in for a thermodynamic cycle
Plotting a thermodynamic process on PV axes provides a graphical depiction of work sinceW = −
∫P dV
Plotting a thermodynamic process on TS axes provides a graphical depiction of heat sinceQ =
∫T dS
As a result of the closed loop in a thermodynamic cycle, we know that since the systemreturns to its original state,
∆U = Q + W = 0
or Q = −W
Hence the areas inside the two closed curves should be the same
Heat engines are run so that W < 0 (net work out) and Q > 0 (net heat in)
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 115 / 196
![Page 363: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/363.jpg)
Graphical depiction of work out and heat in for a thermodynamic cycle
Plotting a thermodynamic process on PV axes provides a graphical depiction of work sinceW = −
∫P dV
Plotting a thermodynamic process on TS axes provides a graphical depiction of heat sinceQ =
∫T dS
As a result of the closed loop in a thermodynamic cycle, we know that since the systemreturns to its original state,
∆U = Q + W = 0
or Q = −W
Hence the areas inside the two closed curves should be the same
Heat engines are run so that W < 0 (net work out) and Q > 0 (net heat in)
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 115 / 196
![Page 364: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/364.jpg)
Graphical depiction of work out and heat in for a thermodynamic cycle
Plotting a thermodynamic process on PV axes provides a graphical depiction of work sinceW = −
∫P dV
Plotting a thermodynamic process on TS axes provides a graphical depiction of heat sinceQ =
∫T dS
As a result of the closed loop in a thermodynamic cycle, we know that since the systemreturns to its original state,
∆U = Q + W = 0
or Q = −W
Hence the areas inside the two closed curves should be the same
Heat engines are run so that W < 0 (net work out) and Q > 0 (net heat in)
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 115 / 196
![Page 365: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/365.jpg)
Graphical depiction of work out and heat in for a thermodynamic cycle
Plotting a thermodynamic process on PV axes provides a graphical depiction of work sinceW = −
∫P dV
Plotting a thermodynamic process on TS axes provides a graphical depiction of heat sinceQ =
∫T dS
As a result of the closed loop in a thermodynamic cycle, we know that since the systemreturns to its original state,
∆U = Q + W = 0
or Q = −W
Hence the areas inside the two closed curves should be the same
Heat engines are run so that W < 0 (net work out) and Q > 0 (net heat in)
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 115 / 196
![Page 366: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/366.jpg)
Graphical depiction of work out and heat in for a thermodynamic cycle
Plotting a thermodynamic process on PV axes provides a graphical depiction of work sinceW = −
∫P dV
Plotting a thermodynamic process on TS axes provides a graphical depiction of heat sinceQ =
∫T dS
As a result of the closed loop in a thermodynamic cycle, we know that since the systemreturns to its original state,
∆U = Q + W = 0
or Q = −W
Hence the areas inside the two closed curves should be the same
Heat engines are run so that W < 0 (net work out) and Q > 0 (net heat in)
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 115 / 196
![Page 367: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/367.jpg)
Closing the loop in thermodynamic cycles
In any thermodynamic cycle, we need to close the loop to get back to where we started
Consider the Carnot cycle, where we apply an isothermal expansion followed by adiabaticexpansion in the first two steps.
Where should step 3 (isothermal compression) end so step 4 (adiabatic compression) takesus back home?
The proper choice of axes can help us determine how to close the loop
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 116 / 196
![Page 368: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/368.jpg)
Closing the loop in thermodynamic cycles
In any thermodynamic cycle, we need to close the loop to get back to where we started
Consider the Carnot cycle, where we apply an isothermal expansion followed by adiabaticexpansion in the first two steps.
Where should step 3 (isothermal compression) end so step 4 (adiabatic compression) takesus back home?
The proper choice of axes can help us determine how to close the loop
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 116 / 196
![Page 369: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/369.jpg)
Closing the loop in thermodynamic cycles
In any thermodynamic cycle, we need to close the loop to get back to where we started
Consider the Carnot cycle, where we apply an isothermal expansion followed by adiabaticexpansion in the first two steps.
Where should step 3 (isothermal compression) end so step 4 (adiabatic compression) takesus back home?
The proper choice of axes can help us determine how to close the loop
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 116 / 196
![Page 370: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/370.jpg)
Closing the loop in thermodynamic cycles
In any thermodynamic cycle, we need to close the loop to get back to where we started
Consider the Carnot cycle, where we apply an isothermal expansion followed by adiabaticexpansion in the first two steps.
Where should step 3 (isothermal compression) end so step 4 (adiabatic compression) takesus back home?
The proper choice of axes can help us determine how to close the loop
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 116 / 196
![Page 371: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/371.jpg)
Closing the loop in thermodynamic cycles
What is the proper choice of axes? Use axes where at least one of the steps is a vertical orhorizontal line (iso ”something”)
In Carnot cycle, we are using isothermal and isentropic processes
Thus, using TS axes will produce the simplest plot, from which it will be easy to determinewhere step 3 should end
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 117 / 196
![Page 372: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/372.jpg)
Closing the loop in thermodynamic cycles
What is the proper choice of axes? Use axes where at least one of the steps is a vertical orhorizontal line (iso ”something”)
In Carnot cycle, we are using isothermal and isentropic processes
Thus, using TS axes will produce the simplest plot, from which it will be easy to determinewhere step 3 should end
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 117 / 196
![Page 373: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/373.jpg)
Closing the loop in thermodynamic cycles
What is the proper choice of axes? Use axes where at least one of the steps is a vertical orhorizontal line (iso ”something”)
In Carnot cycle, we are using isothermal and isentropic processes
Thus, using TS axes will produce the simplest plot, from which it will be easy to determinewhere step 3 should end
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 117 / 196
![Page 374: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/374.jpg)
Closing the loop in thermodynamic cycles
Step 1 (isothermal): T1 constant. ∆S1 = Q1T1
; obtain Q1 given specified final state. Hence
can compute ∆S1.
Step 2 (isentropic): S constant, final T2 specified
Step 3 (isothermal): T2 constant. ∆S2 = Q2T2
. What is ∆S2?
We need ∆S2 = −∆S1 to close the loop since step 4 is isentropic
Hence Q2 = −T2∆S1 = −T2Q1T1
is the heat needed in step 3 to close the cycle
Based on Q2, solve for ∆V or ∆P of step 3
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 118 / 196
![Page 375: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/375.jpg)
Closing the loop in thermodynamic cycles
Step 1 (isothermal): T1 constant. ∆S1 = Q1T1
; obtain Q1 given specified final state. Hence
can compute ∆S1.
Step 2 (isentropic): S constant, final T2 specified
Step 3 (isothermal): T2 constant. ∆S2 = Q2T2
. What is ∆S2?
We need ∆S2 = −∆S1 to close the loop since step 4 is isentropic
Hence Q2 = −T2∆S1 = −T2Q1T1
is the heat needed in step 3 to close the cycle
Based on Q2, solve for ∆V or ∆P of step 3
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 118 / 196
![Page 376: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/376.jpg)
Closing the loop in thermodynamic cycles
Step 1 (isothermal): T1 constant. ∆S1 = Q1T1
; obtain Q1 given specified final state. Hence
can compute ∆S1.
Step 2 (isentropic): S constant, final T2 specified
Step 3 (isothermal): T2 constant. ∆S2 = Q2T2
. What is ∆S2?
We need ∆S2 = −∆S1 to close the loop since step 4 is isentropic
Hence Q2 = −T2∆S1 = −T2Q1T1
is the heat needed in step 3 to close the cycle
Based on Q2, solve for ∆V or ∆P of step 3
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 118 / 196
![Page 377: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/377.jpg)
Closing the loop in thermodynamic cycles
Step 1 (isothermal): T1 constant. ∆S1 = Q1T1
; obtain Q1 given specified final state. Hence
can compute ∆S1.
Step 2 (isentropic): S constant, final T2 specified
Step 3 (isothermal): T2 constant. ∆S2 = Q2T2
. What is ∆S2?
We need ∆S2 = −∆S1 to close the loop since step 4 is isentropic
Hence Q2 = −T2∆S1 = −T2Q1T1
is the heat needed in step 3 to close the cycle
Based on Q2, solve for ∆V or ∆P of step 3
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 118 / 196
![Page 378: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/378.jpg)
Closing the loop in thermodynamic cycles
Step 1 (isothermal): T1 constant. ∆S1 = Q1T1
; obtain Q1 given specified final state. Hence
can compute ∆S1.
Step 2 (isentropic): S constant, final T2 specified
Step 3 (isothermal): T2 constant. ∆S2 = Q2T2
. What is ∆S2?
We need ∆S2 = −∆S1 to close the loop since step 4 is isentropic
Hence Q2 = −T2∆S1 = −T2Q1T1
is the heat needed in step 3 to close the cycle
Based on Q2, solve for ∆V or ∆P of step 3
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 118 / 196
![Page 379: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/379.jpg)
Closing the loop in thermodynamic cycles
Step 1 (isothermal): T1 constant. ∆S1 = Q1T1
; obtain Q1 given specified final state. Hence
can compute ∆S1.
Step 2 (isentropic): S constant, final T2 specified
Step 3 (isothermal): T2 constant. ∆S2 = Q2T2
. What is ∆S2?
We need ∆S2 = −∆S1 to close the loop since step 4 is isentropic
Hence Q2 = −T2∆S1 = −T2Q1T1
is the heat needed in step 3 to close the cycle
Based on Q2, solve for ∆V or ∆P of step 3
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 118 / 196
![Page 380: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/380.jpg)
Closing the loop in thermodynamic cycles
For comparison, consider an isobaric/isovolumetric cycle
Step 1 (isobaric): P1 constant, ∆V1 specified
Step 2 (isovolumetric): V constant, final P2 specified
Step 3 (isobaric): P2 constant, ∆V2 = −∆V1 to close the loop
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 119 / 196
![Page 381: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/381.jpg)
Closing the loop in thermodynamic cycles
For comparison, consider an isobaric/isovolumetric cycle
Step 1 (isobaric): P1 constant, ∆V1 specified
Step 2 (isovolumetric): V constant, final P2 specified
Step 3 (isobaric): P2 constant, ∆V2 = −∆V1 to close the loop
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 119 / 196
![Page 382: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/382.jpg)
Closing the loop in thermodynamic cycles
For comparison, consider an isobaric/isovolumetric cycle
Step 1 (isobaric): P1 constant, ∆V1 specified
Step 2 (isovolumetric): V constant, final P2 specified
Step 3 (isobaric): P2 constant, ∆V2 = −∆V1 to close the loop
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 119 / 196
![Page 383: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/383.jpg)
Closing the loop in thermodynamic cycles
For comparison, consider an isobaric/isovolumetric cycle
Step 1 (isobaric): P1 constant, ∆V1 specified
Step 2 (isovolumetric): V constant, final P2 specified
Step 3 (isobaric): P2 constant, ∆V2 = −∆V1 to close the loop
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 119 / 196
![Page 384: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/384.jpg)
Schematics of Carnot cycle steps
Draw them!
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 120 / 196
![Page 385: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/385.jpg)
Efficiency of heat engines (type of thermodynamic cycle)
|Qin| > |Qout | for a heat engine (hence the name, heat engine)
|Win| < |Wout | for a heat engine (the purpose of the engine is to do work)
Since ∆U = Qnet + Wnet = 0, Qnet = −Wnet and |Qnet | = |Wnet |Since |Qin| > |Qnet |, |Qin| > |Wnet |
Hence |Wnet ||Qin|
< 1. This quantity is called the thermodynamic efficiency of the engine
For a Carnot cycle, the efficiency is T1−T2T1
.
See plot for details
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 121 / 196
![Page 386: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/386.jpg)
Efficiency of heat engines (type of thermodynamic cycle)
|Qin| > |Qout | for a heat engine (hence the name, heat engine)
|Win| < |Wout | for a heat engine (the purpose of the engine is to do work)
Since ∆U = Qnet + Wnet = 0, Qnet = −Wnet and |Qnet | = |Wnet |Since |Qin| > |Qnet |, |Qin| > |Wnet |
Hence |Wnet ||Qin|
< 1. This quantity is called the thermodynamic efficiency of the engine
For a Carnot cycle, the efficiency is T1−T2T1
.
See plot for details
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 121 / 196
![Page 387: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/387.jpg)
Efficiency of heat engines (type of thermodynamic cycle)
|Qin| > |Qout | for a heat engine (hence the name, heat engine)
|Win| < |Wout | for a heat engine (the purpose of the engine is to do work)
Since ∆U = Qnet + Wnet = 0, Qnet = −Wnet and |Qnet | = |Wnet |
Since |Qin| > |Qnet |, |Qin| > |Wnet |
Hence |Wnet ||Qin|
< 1. This quantity is called the thermodynamic efficiency of the engine
For a Carnot cycle, the efficiency is T1−T2T1
.
See plot for details
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 121 / 196
![Page 388: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/388.jpg)
Efficiency of heat engines (type of thermodynamic cycle)
|Qin| > |Qout | for a heat engine (hence the name, heat engine)
|Win| < |Wout | for a heat engine (the purpose of the engine is to do work)
Since ∆U = Qnet + Wnet = 0, Qnet = −Wnet and |Qnet | = |Wnet |Since |Qin| > |Qnet |, |Qin| > |Wnet |
Hence |Wnet ||Qin|
< 1. This quantity is called the thermodynamic efficiency of the engine
For a Carnot cycle, the efficiency is T1−T2T1
.
See plot for details
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 121 / 196
![Page 389: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/389.jpg)
Efficiency of heat engines (type of thermodynamic cycle)
|Qin| > |Qout | for a heat engine (hence the name, heat engine)
|Win| < |Wout | for a heat engine (the purpose of the engine is to do work)
Since ∆U = Qnet + Wnet = 0, Qnet = −Wnet and |Qnet | = |Wnet |Since |Qin| > |Qnet |, |Qin| > |Wnet |
Hence |Wnet ||Qin|
< 1. This quantity is called the thermodynamic efficiency of the engine
For a Carnot cycle, the efficiency is T1−T2T1
.
See plot for details
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 121 / 196
![Page 390: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/390.jpg)
Efficiency of heat engines (type of thermodynamic cycle)
|Qin| > |Qout | for a heat engine (hence the name, heat engine)
|Win| < |Wout | for a heat engine (the purpose of the engine is to do work)
Since ∆U = Qnet + Wnet = 0, Qnet = −Wnet and |Qnet | = |Wnet |Since |Qin| > |Qnet |, |Qin| > |Wnet |
Hence |Wnet ||Qin|
< 1. This quantity is called the thermodynamic efficiency of the engine
For a Carnot cycle, the efficiency is T1−T2T1
.
See plot for details
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 121 / 196
![Page 391: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/391.jpg)
Efficiency of heat engines (type of thermodynamic cycle)
|Qin| > |Qout | for a heat engine (hence the name, heat engine)
|Win| < |Wout | for a heat engine (the purpose of the engine is to do work)
Since ∆U = Qnet + Wnet = 0, Qnet = −Wnet and |Qnet | = |Wnet |Since |Qin| > |Qnet |, |Qin| > |Wnet |
Hence |Wnet ||Qin|
< 1. This quantity is called the thermodynamic efficiency of the engine
For a Carnot cycle, the efficiency is T1−T2T1
.
See plot for details
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 121 / 196
![Page 392: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/392.jpg)
Efficiency of heat engines (cont’d)
If there sources of Qin that are not associated with Wout , this decreases the engine’sefficiency
Any step in the cycle that involves |Qin| > |Wout | is irreversible since it involves heat transferat a finite T difference between system and surroundings
Thus a decrease in thermodynamic efficiency is associated with ∆Stot > 0, which is anindication that energy was dissipated rather than being using for maximum useful work.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 122 / 196
![Page 393: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/393.jpg)
Efficiency of heat engines (cont’d)
If there sources of Qin that are not associated with Wout , this decreases the engine’sefficiency
Any step in the cycle that involves |Qin| > |Wout | is irreversible since it involves heat transferat a finite T difference between system and surroundings
Thus a decrease in thermodynamic efficiency is associated with ∆Stot > 0, which is anindication that energy was dissipated rather than being using for maximum useful work.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 122 / 196
![Page 394: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/394.jpg)
Efficiency of heat engines (cont’d)
If there sources of Qin that are not associated with Wout , this decreases the engine’sefficiency
Any step in the cycle that involves |Qin| > |Wout | is irreversible since it involves heat transferat a finite T difference between system and surroundings
Thus a decrease in thermodynamic efficiency is associated with ∆Stot > 0, which is anindication that energy was dissipated rather than being using for maximum useful work.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 122 / 196
![Page 395: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/395.jpg)
Example of thermodynamic cycle with ∆Stot > 0
What if the adiabatic (isentropic) steps of a Carnot cycle were replaced by isovolumetricsteps?
Step 2 (isovolumetric cooling): Qout , W = 0
∆S2,sys = NCv∫ T2
T1
1T
dT , with T2 < T1; hence ∆S2,sys < 0
For surroundings (assuming bath does not change appreciably in temperature),
∆S2,bath = Q2T2
> 0
∆S2,tot > 0
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 123 / 196
![Page 396: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/396.jpg)
Example of thermodynamic cycle with ∆Stot > 0
What if the adiabatic (isentropic) steps of a Carnot cycle were replaced by isovolumetricsteps?
Step 2 (isovolumetric cooling): Qout , W = 0
∆S2,sys = NCv∫ T2
T1
1T
dT , with T2 < T1; hence ∆S2,sys < 0
For surroundings (assuming bath does not change appreciably in temperature),
∆S2,bath = Q2T2
> 0
∆S2,tot > 0
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 123 / 196
![Page 397: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/397.jpg)
Example of thermodynamic cycle with ∆Stot > 0
What if the adiabatic (isentropic) steps of a Carnot cycle were replaced by isovolumetricsteps?
Step 2 (isovolumetric cooling): Qout , W = 0
∆S2,sys = NCv∫ T2
T1
1T
dT , with T2 < T1; hence ∆S2,sys < 0
For surroundings (assuming bath does not change appreciably in temperature),
∆S2,bath = Q2T2
> 0
∆S2,tot > 0
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 123 / 196
![Page 398: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/398.jpg)
Example of thermodynamic cycle with ∆Stot > 0
What if the adiabatic (isentropic) steps of a Carnot cycle were replaced by isovolumetricsteps?
Step 2 (isovolumetric cooling): Qout , W = 0
∆S2,sys = NCv∫ T2
T1
1T
dT , with T2 < T1; hence ∆S2,sys < 0
For surroundings (assuming bath does not change appreciably in temperature),
∆S2,bath = Q2T2
> 0
∆S2,tot > 0
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 123 / 196
![Page 399: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/399.jpg)
Example of thermodynamic cycle with ∆Stot > 0
What if the adiabatic (isentropic) steps of a Carnot cycle were replaced by isovolumetricsteps?
Step 2 (isovolumetric cooling): Qout , W = 0
∆S2,sys = NCv∫ T2
T1
1T
dT , with T2 < T1; hence ∆S2,sys < 0
For surroundings (assuming bath does not change appreciably in temperature),
∆S2,bath = Q2T2
> 0
∆S2,tot > 0
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 123 / 196
![Page 400: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/400.jpg)
Example of thermodynamic cycle with ∆Stot > 0
Step 4 (isovolumetric heating): Qin, W = 0
∆S4,sys = NCv∫ T1
T2
1T
dT , with T2 < T1; hence ∆S2,sys > 0
For surroundings (assuming bath does not change appreciably in temperature),
∆S4,bath = Q4T1
< 0
∆S4,tot > 0
Thus, although ∆Ssys = 0, ∆Snet = ∆S2,tot + ∆S4,tot > 0
Compare Carnot cycle (reversible): ∆Ssys = 0, ∆Snet = 0
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 124 / 196
![Page 401: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/401.jpg)
Example of thermodynamic cycle with ∆Stot > 0
Step 4 (isovolumetric heating): Qin, W = 0
∆S4,sys = NCv∫ T1
T2
1T
dT , with T2 < T1; hence ∆S2,sys > 0
For surroundings (assuming bath does not change appreciably in temperature),
∆S4,bath = Q4T1
< 0
∆S4,tot > 0
Thus, although ∆Ssys = 0, ∆Snet = ∆S2,tot + ∆S4,tot > 0
Compare Carnot cycle (reversible): ∆Ssys = 0, ∆Snet = 0
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 124 / 196
![Page 402: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/402.jpg)
Example of thermodynamic cycle with ∆Stot > 0
Step 4 (isovolumetric heating): Qin, W = 0
∆S4,sys = NCv∫ T1
T2
1T
dT , with T2 < T1; hence ∆S2,sys > 0
For surroundings (assuming bath does not change appreciably in temperature),
∆S4,bath = Q4T1
< 0
∆S4,tot > 0
Thus, although ∆Ssys = 0, ∆Snet = ∆S2,tot + ∆S4,tot > 0
Compare Carnot cycle (reversible): ∆Ssys = 0, ∆Snet = 0
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 124 / 196
![Page 403: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/403.jpg)
Example of thermodynamic cycle with ∆Stot > 0
Step 4 (isovolumetric heating): Qin, W = 0
∆S4,sys = NCv∫ T1
T2
1T
dT , with T2 < T1; hence ∆S2,sys > 0
For surroundings (assuming bath does not change appreciably in temperature),
∆S4,bath = Q4T1
< 0
∆S4,tot > 0
Thus, although ∆Ssys = 0, ∆Snet = ∆S2,tot + ∆S4,tot > 0
Compare Carnot cycle (reversible): ∆Ssys = 0, ∆Snet = 0
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 124 / 196
![Page 404: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/404.jpg)
Example of thermodynamic cycle with ∆Stot > 0
Step 4 (isovolumetric heating): Qin, W = 0
∆S4,sys = NCv∫ T1
T2
1T
dT , with T2 < T1; hence ∆S2,sys > 0
For surroundings (assuming bath does not change appreciably in temperature),
∆S4,bath = Q4T1
< 0
∆S4,tot > 0
Thus, although ∆Ssys = 0, ∆Snet = ∆S2,tot + ∆S4,tot > 0
Compare Carnot cycle (reversible): ∆Ssys = 0, ∆Snet = 0
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 124 / 196
![Page 405: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/405.jpg)
Example of thermodynamic cycle with ∆Stot > 0
Step 4 (isovolumetric heating): Qin, W = 0
∆S4,sys = NCv∫ T1
T2
1T
dT , with T2 < T1; hence ∆S2,sys > 0
For surroundings (assuming bath does not change appreciably in temperature),
∆S4,bath = Q4T1
< 0
∆S4,tot > 0
Thus, although ∆Ssys = 0, ∆Snet = ∆S2,tot + ∆S4,tot > 0
Compare Carnot cycle (reversible): ∆Ssys = 0, ∆Snet = 0
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 124 / 196
![Page 406: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/406.jpg)
Thermodynamic potentials revisited
Applying our knowledge regarding the analogous formulations of Q,W in terms of intensive,extensive variables, let us write the energy balance equation in differential form
dU = dW + dQ
dU = −PdV + TdS
Note that we needed to introduce S in order to complete this expression in terms of ourstandard intensive and extensive variables (substituting TdS = dQ)
We can also write changes of enthalpy (another thermodynamic potential) directly in termsof these intensive and extensive variables:
H = U + PV
dH = dU + d(PV )
= −PdV + TdS + PdV + VdP
= VdP + TdS
where we have applied the product rule
At constant P, dH = TdS and hence change in enthalpy is equivalent to the heatexchanged, as we have seen.
S is called a state function (as opposed to a state variable or thermodynamic potential), butspecification of any two of P,V ,T , S determines state. In the problems we study, it is morecommon to speak of entropy changes ∆S rather than absolute entropies.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 125 / 196
![Page 407: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/407.jpg)
Thermodynamic potentials revisited
Applying our knowledge regarding the analogous formulations of Q,W in terms of intensive,extensive variables, let us write the energy balance equation in differential form
dU = dW + dQ
dU = −PdV + TdS
Note that we needed to introduce S in order to complete this expression in terms of ourstandard intensive and extensive variables (substituting TdS = dQ)
We can also write changes of enthalpy (another thermodynamic potential) directly in termsof these intensive and extensive variables:
H = U + PV
dH = dU + d(PV )
= −PdV + TdS + PdV + VdP
= VdP + TdS
where we have applied the product rule
At constant P, dH = TdS and hence change in enthalpy is equivalent to the heatexchanged, as we have seen.
S is called a state function (as opposed to a state variable or thermodynamic potential), butspecification of any two of P,V ,T , S determines state. In the problems we study, it is morecommon to speak of entropy changes ∆S rather than absolute entropies.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 125 / 196
![Page 408: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/408.jpg)
Thermodynamic potentials revisited
Applying our knowledge regarding the analogous formulations of Q,W in terms of intensive,extensive variables, let us write the energy balance equation in differential form
dU = dW + dQ
dU = −PdV + TdS
Note that we needed to introduce S in order to complete this expression in terms of ourstandard intensive and extensive variables (substituting TdS = dQ)
We can also write changes of enthalpy (another thermodynamic potential) directly in termsof these intensive and extensive variables:
H = U + PV
dH = dU + d(PV )
= −PdV + TdS + PdV + VdP
= VdP + TdS
where we have applied the product rule
At constant P, dH = TdS and hence change in enthalpy is equivalent to the heatexchanged, as we have seen.
S is called a state function (as opposed to a state variable or thermodynamic potential), butspecification of any two of P,V ,T , S determines state. In the problems we study, it is morecommon to speak of entropy changes ∆S rather than absolute entropies.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 125 / 196
![Page 409: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/409.jpg)
Heat pumps and refrigerators: characterizing performance
Heat pumps operate in reverse compared to heat engines
The net heat Qnet is negative (net heat out) whereas the net work is positive (net work in)
This is because Qout (step 1 in the reverse Carnot cycle) is greater in magnitude than theQin (step 3 in the reverse Carnot cycle)
Similar, the Win (step 1 in the reverse Carnot cycle) is greater in magnitude than the Wout
(step 3 in the reverse Carnot cycle)
Instead of efficiency, it is common to use the so-called coefficient of performance whendescribing the effectiveness of a heat pump/refrigerator.
Coefficient of performance for heating: = |Qout ||Wnet |
= T1T1−T2
, which is just the inverse of the
Carnot efficiency, since Qout is equal in magnitude to Qin for the Carnot cycle, and Wnet ’sare also equal in magnitude.
Note that the coefficient of performance for heating is always > 1 (since its reciprocal, theCarnot efficiency, was < 1).
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 126 / 196
![Page 410: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/410.jpg)
Heat pumps and refrigerators: coefficient of performance, cooling
Coefficient of performance for cooling: commonly used in refrigeration
In refrigeration, one wants to remove heat from a body at a low temperature; in this case, itcan be considered to be the heat bath at T2 < T1
The coefficient of performance commonly used for refrigeration is the ratio of the amountheat removed at the lower temperature to the net work required to run the refrigerator.
Coefficient of performance for cooling: = |Qin||Wnet |
See TS axis plot
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 127 / 196
![Page 411: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/411.jpg)
Rate of change and integral formulations of energy balance
U2 − U1 = Q + W
Q =
∫ t2
t1
dQ
dtdt
W =
∫ t2
t1
dW
dtdt
= −∫ t2
t1
PdV /dt dt = −∫ V2
V1
P dV
We can also consider energy flow rates due to mass flow in/out of the system
![Page 412: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/412.jpg)
Rate of change of energy due to mass flow
We can also consider energy flow due to mass flow in/out of the systemThis is needed for engineering applications since we often build engines and refrigeratorsfluid flowing through pipes and devices, rather than keeping our fluid within a cylinder
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 129 / 196
![Page 413: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/413.jpg)
Rate of change of work due to mass flow
A given amount of mass ∆Mk about to enter through port k has volume ∆Mk × Vk . Thetotal volume of the original system plus this mass is V + ∆Mk × Vk , where Vk is volume perunit mass of the material entering through port k.
For processes involving mass flow, it is more common to use V (volume per unit mass) or V(molar volume) of the gas rather than V , since the total amount of material we are lookingmay be changing but with a given density.
When the new mass is squeezed into the container, the total volume becomes V .
This squeezing caused the total volume of the original system plus new mass to decrease by∆Mk × Vk . Thus the overall system was compressed during squeezing. This means work wasdone on the system by the process of squeezing new mass in.
The rate of change of volume of the system is dV /dt = −∑
k Mk Vk . Thus the work (done
on the system) due to mass flow =∑
k Mk (PV )k
![Page 414: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/414.jpg)
There is a rate of internal energy flow accompanying mass flow:∑
k Mk Uk , since the newmass has these forms of energy as well.
Putting it all together,
dU/dt =dQ
dt︸︷︷︸heat
− PdV /dt︸ ︷︷ ︸work due to expansion
+∑
k
Mk (PV )k︸ ︷︷ ︸work due to mass flow
+∑
k
Mk Uk︸ ︷︷ ︸U from mass flow
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 131 / 196
![Page 415: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/415.jpg)
Applications of energy flow during mass flow: compressors
A compressor is a device that takes in a fluid at pressure P1 and emits it at some higherpressure P2 > P1 (or equivalently, lower molar volume); we can later do work with thepressurized fluid. It takes the place of the compression steps in the cycles we have studied sofar
See picture
Consider mass ∆N1 entering the inlet port of a compressor
Over the same period of time, mass ∆N2, which is now compressed, exits the outlet port ofthe compressor
Assume the compressor is operating at “steady-state”, meaning the total amount of materialinside at any time is the same. Thus ∆N2 = −∆N1 = −∆N
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 132 / 196
![Page 416: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/416.jpg)
Applications of energy flow during mass flow: compressors
A compressor is a device that takes in a fluid at pressure P1 and emits it at some higherpressure P2 > P1 (or equivalently, lower molar volume); we can later do work with thepressurized fluid. It takes the place of the compression steps in the cycles we have studied sofar
See picture
Consider mass ∆N1 entering the inlet port of a compressor
Over the same period of time, mass ∆N2, which is now compressed, exits the outlet port ofthe compressor
Assume the compressor is operating at “steady-state”, meaning the total amount of materialinside at any time is the same. Thus ∆N2 = −∆N1 = −∆N
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 132 / 196
![Page 417: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/417.jpg)
Applications of energy flow during mass flow: compressors
A compressor is a device that takes in a fluid at pressure P1 and emits it at some higherpressure P2 > P1 (or equivalently, lower molar volume); we can later do work with thepressurized fluid. It takes the place of the compression steps in the cycles we have studied sofar
See picture
Consider mass ∆N1 entering the inlet port of a compressor
Over the same period of time, mass ∆N2, which is now compressed, exits the outlet port ofthe compressor
Assume the compressor is operating at “steady-state”, meaning the total amount of materialinside at any time is the same. Thus ∆N2 = −∆N1 = −∆N
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 132 / 196
![Page 418: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/418.jpg)
Applications of energy flow during mass flow: compressors
A compressor is a device that takes in a fluid at pressure P1 and emits it at some higherpressure P2 > P1 (or equivalently, lower molar volume); we can later do work with thepressurized fluid. It takes the place of the compression steps in the cycles we have studied sofar
See picture
Consider mass ∆N1 entering the inlet port of a compressor
Over the same period of time, mass ∆N2, which is now compressed, exits the outlet port ofthe compressor
Assume the compressor is operating at “steady-state”, meaning the total amount of materialinside at any time is the same. Thus ∆N2 = −∆N1 = −∆N
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 132 / 196
![Page 419: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/419.jpg)
Applications of energy flow during mass flow: compressors
A compressor is a device that takes in a fluid at pressure P1 and emits it at some higherpressure P2 > P1 (or equivalently, lower molar volume); we can later do work with thepressurized fluid. It takes the place of the compression steps in the cycles we have studied sofar
See picture
Consider mass ∆N1 entering the inlet port of a compressor
Over the same period of time, mass ∆N2, which is now compressed, exits the outlet port ofthe compressor
Assume the compressor is operating at “steady-state”, meaning the total amount of materialinside at any time is the same. Thus ∆N2 = −∆N1 = −∆N
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 132 / 196
![Page 420: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/420.jpg)
Applications of energy flow by mass flow: compressors (cont’d)
Inlet port: ∆N is flowing in at pressure P1; its volume V1 = V1∆N
Outlet port: ∆N is flowing out at pressure P2 > P1; its volume V2 = V2∆N < V1.
The compressor must push the gas out into the outlet stream, which is at higher pressure.
Overall work due to pushing the gas through the device across the pressure difference(increase): W = P1V1∆N − P2V2∆N = P1V1 − P2V2; P2 > P1
First term is work done on the system since we are squeezing material into the compressorand the second term is work done by the system in pushing the material out of thecompressor.
For the differential formulation, we have dWdt
=∑
k Pk Vk Nk where here k runs from 1 to 2for the inlet and outlet ports
Note that the work required to push the material through the device is not being applied tochange the state of another system (hence is not useful)
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 133 / 196
![Page 421: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/421.jpg)
Applications of energy flow by mass flow: compressors (cont’d)
Inlet port: ∆N is flowing in at pressure P1; its volume V1 = V1∆N
Outlet port: ∆N is flowing out at pressure P2 > P1; its volume V2 = V2∆N < V1.
The compressor must push the gas out into the outlet stream, which is at higher pressure.
Overall work due to pushing the gas through the device across the pressure difference(increase): W = P1V1∆N − P2V2∆N = P1V1 − P2V2; P2 > P1
First term is work done on the system since we are squeezing material into the compressorand the second term is work done by the system in pushing the material out of thecompressor.
For the differential formulation, we have dWdt
=∑
k Pk Vk Nk where here k runs from 1 to 2for the inlet and outlet ports
Note that the work required to push the material through the device is not being applied tochange the state of another system (hence is not useful)
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 133 / 196
![Page 422: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/422.jpg)
Applications of energy flow by mass flow: compressors (cont’d)
Inlet port: ∆N is flowing in at pressure P1; its volume V1 = V1∆N
Outlet port: ∆N is flowing out at pressure P2 > P1; its volume V2 = V2∆N < V1.
The compressor must push the gas out into the outlet stream, which is at higher pressure.
Overall work due to pushing the gas through the device across the pressure difference(increase): W = P1V1∆N − P2V2∆N = P1V1 − P2V2; P2 > P1
First term is work done on the system since we are squeezing material into the compressorand the second term is work done by the system in pushing the material out of thecompressor.
For the differential formulation, we have dWdt
=∑
k Pk Vk Nk where here k runs from 1 to 2for the inlet and outlet ports
Note that the work required to push the material through the device is not being applied tochange the state of another system (hence is not useful)
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 133 / 196
![Page 423: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/423.jpg)
Applications of energy flow by mass flow: compressors (cont’d)
Inlet port: ∆N is flowing in at pressure P1; its volume V1 = V1∆N
Outlet port: ∆N is flowing out at pressure P2 > P1; its volume V2 = V2∆N < V1.
The compressor must push the gas out into the outlet stream, which is at higher pressure.
Overall work due to pushing the gas through the device across the pressure difference(increase): W = P1V1∆N − P2V2∆N = P1V1 − P2V2; P2 > P1
First term is work done on the system since we are squeezing material into the compressorand the second term is work done by the system in pushing the material out of thecompressor.
For the differential formulation, we have dWdt
=∑
k Pk Vk Nk where here k runs from 1 to 2for the inlet and outlet ports
Note that the work required to push the material through the device is not being applied tochange the state of another system (hence is not useful)
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 133 / 196
![Page 424: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/424.jpg)
Applications of energy flow by mass flow: compressors (cont’d)
Inlet port: ∆N is flowing in at pressure P1; its volume V1 = V1∆N
Outlet port: ∆N is flowing out at pressure P2 > P1; its volume V2 = V2∆N < V1.
The compressor must push the gas out into the outlet stream, which is at higher pressure.
Overall work due to pushing the gas through the device across the pressure difference(increase): W = P1V1∆N − P2V2∆N = P1V1 − P2V2; P2 > P1
First term is work done on the system since we are squeezing material into the compressorand the second term is work done by the system in pushing the material out of thecompressor.
For the differential formulation, we have dWdt
=∑
k Pk Vk Nk where here k runs from 1 to 2for the inlet and outlet ports
Note that the work required to push the material through the device is not being applied tochange the state of another system (hence is not useful)
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 133 / 196
![Page 425: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/425.jpg)
Applications of energy flow by mass flow: compressors (cont’d)
Inlet port: ∆N is flowing in at pressure P1; its volume V1 = V1∆N
Outlet port: ∆N is flowing out at pressure P2 > P1; its volume V2 = V2∆N < V1.
The compressor must push the gas out into the outlet stream, which is at higher pressure.
Overall work due to pushing the gas through the device across the pressure difference(increase): W = P1V1∆N − P2V2∆N = P1V1 − P2V2; P2 > P1
First term is work done on the system since we are squeezing material into the compressorand the second term is work done by the system in pushing the material out of thecompressor.
For the differential formulation, we have dWdt
=∑
k Pk Vk Nk where here k runs from 1 to 2for the inlet and outlet ports
Note that the work required to push the material through the device is not being applied tochange the state of another system (hence is not useful)
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 133 / 196
![Page 426: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/426.jpg)
Applications of energy flow by mass flow: compressors (cont’d)
Inlet port: ∆N is flowing in at pressure P1; its volume V1 = V1∆N
Outlet port: ∆N is flowing out at pressure P2 > P1; its volume V2 = V2∆N < V1.
The compressor must push the gas out into the outlet stream, which is at higher pressure.
Overall work due to pushing the gas through the device across the pressure difference(increase): W = P1V1∆N − P2V2∆N = P1V1 − P2V2; P2 > P1
First term is work done on the system since we are squeezing material into the compressorand the second term is work done by the system in pushing the material out of thecompressor.
For the differential formulation, we have dWdt
=∑
k Pk Vk Nk where here k runs from 1 to 2for the inlet and outlet ports
Note that the work required to push the material through the device is not being applied tochange the state of another system (hence is not useful)
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 133 / 196
![Page 427: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/427.jpg)
Ideal gas compressors
Consider an ideal gas working fluid
Inlet stream at P1, V1,T1; outlet stream at P2, V2,T2. Within the device, the gas iscompressed such that P2 > P1, V2 < V1.
According to above analysis for energy flow accompanying mass flow, the change of energyof the compressor is:
∆U = P1V1∆N − P2V2∆N︸ ︷︷ ︸work due to mass flow
+ ∆NCv (T1 − T2)︸ ︷︷ ︸internal energy change to due to mass flow
= (RT1 − RT2)∆N + ∆NCv (T1 − T2)
= −R(T2 − T1)∆N −∆NCv (T2 − T1)
The first work term is work needed to push the fluid through the device by pushing the fluidin front of ∆N out of the way. This is the important new term that will be appearing inthese problems.
Let’s look at the simplest, isothermal example: then ∆U = 0. There is no work needed topush the fluid across the pressure difference for this example
What about the work needed to compress the gas within the device? As before, this is Win:
Win = −∆NRT ln(V2/V1)
which is positive since V2 < V1
For T to remain constant, this must be matched by Qout = ∆NRT ln(V2/V1) (negative)
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 134 / 196
![Page 428: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/428.jpg)
Applications of energy flow by mass flow: turbines
A turbine is a device that takes in fluid at high P and emits it at low P, using expansion ofthe fluid to do work.
See picture
Inlet port: ∆N is flowing in at pressure P1; its volume V1 = V1∆N
Outlet port: ∆N is flowing out at pressure P2 < P1, V2 > V1
Overall work due to pushing the gas through the device across the pressure difference(decrease): W = P1V1∆N − P2V2∆N = P1V1 − P2V2
First term is work done on the system since we are squeezing material into the compressorand the second term is work done by the system in pushing the material out of thecompressor from 1 to 2 for the inlet and outlet ports
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 135 / 196
![Page 429: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/429.jpg)
Ideal gas turbines
Consider an ideal gas working fluid for a turbine as well
Inlet stream at P1, V1,T1; outlet stream at P2, V2,T2. Within the device, the gas isexpanded such that P2 < P1, V2 > V1. Let’s look at the simplest, isothermal example.
∆U = 0 again since it’s isothermal
What about the work done due to expansion of the gas within the device? As before, this isWout
Wout = −∆NRT ln(V2/V1)
which is negative since V2 > V1. This is the point of running the turbine: to do useful work
For T to remain constant, this must be match by Qout = ∆NRT ln(V2/V1) (positive)
In the differential formulation we will write these as rates of heat and work in terms of Nflow rate
Wout = −NRT ln(V2/V1)
Qout = NRT ln(V2/V1)
The Wout here is useful
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 136 / 196
![Page 430: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/430.jpg)
Ideal gas heaters
Consider a heating device for an ideal gas working fluid
Inlet stream at P1, V1,T1; outlet stream at P2, V2,T2. Within the device, the gas is heatedsuch that T2 > T1. First assume this heating is done isovolumetrically so V2 = V1
According to above analysis for energy flow accompanying mass flow, the change of energyof the heater is (again):
∆U = P1V1∆N − P2V2∆N︸ ︷︷ ︸work due to mass flow
+ ∆NCv (T1 − T2)︸ ︷︷ ︸internal energy change to due to mass flow
= (RT1 − RT2)∆N + ∆NCv (T1 − T2)
= −R(T2 − T1)∆N −∆NCv (T2 − T1)
Now T2 > T1 so there must be a source of net energy input to enact this change
Compensating energy input comes from heat
Qin = R(T2 − T1)∆N + ∆NCv (T2 − T1)
To get the signs right, note that the energy input (here in the form of heat) must be equal inmagnitude and opposite in sign to the ∆U in order to compensate and keep the device atsteady state
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 137 / 196
![Page 431: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/431.jpg)
Use of thermodynamic cycles involving mass flow for engines
As example of a thermodynamic cycle for a heat engine involving mass flow, consider onecalled a Stirling cycle (isovolumetric/isothermal); similar to cycle we studied on HW 4 butwith mass flow
See depiction of cycle with compressor and turbine: the compression and expansion are doneisothermally using the devices we just discussed
Now must express heat and work in terms of rates of change, using known rates of mass flowN. Problems are usually formulated in this way: given flow rates N and P, V ,T changesacross the devices
The heatings and coolings between T1 and T2 are done using heat exchangers, isobarically -devices that transmit heat to and from flowing mass
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 138 / 196
![Page 432: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/432.jpg)
Illustration of Stirling cycle using ideal gas
Step 1: isothermal turbine (expansion)
0 = Q + W
W = −NRT1 ln(V2/V1)
Q = NRT1 ln(V2/V1)
Step 2: isovolumetric cooling
Q = N(Cv + R)(T2 − T1)
Step 3: isothermal compressor
W = −NRT2 ln(V4/V3)
Q = NRT2 ln(V4/V3)
Step 4: isovolumetric heating
Q = N(Cv + R)(T1 − T2)
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 139 / 196
![Page 433: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/433.jpg)
Use of heat exchangers in thermodynamic cycles involving mass flow
The efficiency of engines using mass flow can be improved by using heat exchangers
In Stirling cycle, note
Q2 = N(Cv + R)(T2 − T1)
Q4 = N(Cv + R)(T1 − T2)
Hence Q2 = −Q4. Why not use the heat liberated during the cooling step to heat thestream during the heating step?
This principle is called heat exchange.
Heat exchange can increase the efficiency of an engine:
Qin = Q1 = NRT1 ln(V2/V1)
Wout = W1 + W3
Efficiency =|W1 + W3|
Q1
Note that we have omitted other sources of heat input because of the heat exchanger
See schematic of the Stirling cycle with heat exchanger
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 140 / 196
![Page 434: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/434.jpg)
Ideal gas heaters (cont’d)
For an isobaric heating in a mass flow device, since work is done within the device duringthe heating, there must be a source of additional energy; this would require additional Qin:
Qin = R(T2 − T1)∆N + ∆N(Cv + R)(T2 − T1)
= ∆N(Cv + 2R)(T2 − T1)
In the book it is assumed that the additional energy required for the expansion work isprovided by the device and Qin is listed as the same for isobaric and isovolumetric heatings
It is a matter of how you account for the energy changes; we will clarify when asking youquestions on this
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 141 / 196
![Page 435: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/435.jpg)
Outline
1 What is Thermodynamics?
2 Some Thermodynamics Terminology
3 Basic concepts of thermodynamics
4 Thermodynamic equations of state
5 Conservation of Mass
6 Integral formulation of mass balance
7 Multicomponent mass balance
8 Conservation of energyEnergy balance
9 Towards the 2nd Law of Thermodynamics
10 Toward engineering applications: thermodynamic cycles and heat engines
11 Thermodynamic properties of real substances (not ideal gases)Computation of heat and work for thermodynamic processes involving nonideal substancesComputation of entropy changes for thermodynamic processes involving nonideal substances
12 Outline of remaining topics and schedule
13 Further analysis of the behavior of real gases
14 Phase equilibrium
15 More on Gibbs free energy and applications to phase equilibrium
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 142 / 196
![Page 436: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/436.jpg)
From thermodynamics of ideal to thermodynamics of non-ideal substances
Ideal gas has some special properties
Its state equation is particularly simple (all state variables enter linearly)
Consider a nonideal gas equation of state:
PV = NRT
(1 +
B1(T )
V+
B2(T )
V 2+ · · ·
)This is called the virial equation of state
Note that as molar volume decreases, the correction terms after the 1 become moreimportant (due to molecular interactions in the gas)
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 143 / 196
![Page 437: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/437.jpg)
Computation of internal energy changes of an ideal gas were particularly simple since
dU = NCv dT
i.e. the energy does not explicitly depend on V or P and U can be written as U = U(T ).Microscopically, this is because the gas molecules do not interact
Note that I have used the notation Cv for the molar heat capacity; this will allow me to dropthe N when writing expressions in terms of Cv , which I will now use to refer to the total heatcapacity:
dU = Cv dT
for an ideal gas
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 144 / 196
![Page 438: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/438.jpg)
From thermodynamics of ideal to thermodynamics of nonideal substances
For a nonideal substances, the internal energy can depend on state variables other than T(cannot always write U = U(T ))
As we mentioned previously, Cv ≡(
∂U∂T
)V
(which is equal to dUdT
for an ideal gas).
In general, a thermodynamic potential like U can be written in terms of (as an explicitfunction of) any two state variables (since any two state variables determine the third)
Changes in any thermodynamic potential can be written in terms of corresponding changesin these two state variables
What is the appropriate general expression for dU in terms of dT and dV ? I.e., how canwe write U = U(T ,V ) for a nonideal substance?
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 145 / 196
![Page 439: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/439.jpg)
Towards a general expression for internal energy changes in terms oftemperature and volume
Recall our general expression for dU in terms of differential heat and work contributions:
dU = TdS − PdV
Here the first term is dQ and the second term is dW . This equation always holds for anysubstance. This assumes U = U(S ,V ), which is not convenient since we generally do notmeasure changes in S directly
In the language of partial derivatives, we have
T =
(∂U
∂S
)V
P = −(∂U
∂V
)S
A total differential like dU can thus be written in terms of the sum of 1) the partialderivative with respect to state variable 1, at constant value of the 2nd state variable, timesthe infinitesimal change in the 1st variable; 2) the partial derivative with respect to statevariable 2, at constant value of the 1st state variable, times the infinitesimal change in the2nd variable:
dU =
(∂U
∂S
)V
dS +
(∂U
∂V
)S
dV
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 146 / 196
![Page 440: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/440.jpg)
Now, we want an expression of the form
dU =
(∂U
∂T
)V
dT +
(∂U
∂V
)T
dV
= NCv dT +
(∂U
∂V
)T
dV
where we have substituted the definition of Cv .
So our question is, what is(
∂U∂V
)T
?
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 147 / 196
![Page 441: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/441.jpg)
Towards a general expression for internal energy changes in terms oftemperature and volume
What do we know about the term(
∂U∂V
)T
dV ?
1 It is equal to zero for an ideal gas2 It must have a contribution from −PdV , i.e., the work done due to change of volume
Thus this term has the form (∂U
∂V
)T
dV = [??− P] dV
where ??− P = 0 for an ideal gas
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 148 / 196
![Page 442: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/442.jpg)
Towards a general expression for internal energy changes in terms oftemperature and volume
Thus this term has the form (∂U
∂V
)T
dV = [??− P] dV
where ??− P = 0 for an ideal gas
It turns out that the expression is(∂U
∂V
)T
dV =
[T
(∂P
∂T
)V
− P
]dV
as we can show explicitly later, but this is an identity that you can remember for now
Verify that it = 0 for an ideal gas, by substituting the equation of state PV = NRT :(∂U
∂V
)T
dV =
[T
(∂P
∂T
)V
− P
]dV
= T
(∂ NRT
V
∂T
)V
dV − PdV
= (NRT/V )dV − PdV
= (P − P)dV
= 0
Note that this follows from the linearity of the equation of state in T
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 149 / 196
![Page 443: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/443.jpg)
Towards a general expression for internal energy changes in terms oftemperature and volume
You can view the term T(
∂P∂T
)V
as a “correction required to convert the term TdS into
Cv dT ”
So we have
dU = NCv dT +
[T
(∂P
∂T
)V
− P
]dV
as an alternative todU = TdS − PdV
when we want to express U = U(T ,V )
This expression is fully general, and applies to nonideal substances
Note the advantages of this expression for dU for practical calculations: you can computechanges in internal energy purely in terms of the heat capacity and the equation of state,and you do not need to measure changes in entropy to do it
Next we will compute ∆U’s for nonideal substances given their heat capacities and equationsof state
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 150 / 196
![Page 444: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/444.jpg)
Towards a general expression for internal energy changes in terms oftemperature and volume
You can view the term T(
∂P∂T
)V
as a “correction required to convert the term TdS into
Cv dT ”
So we have
dU = NCv dT +
[T
(∂P
∂T
)V
− P
]dV
as an alternative todU = TdS − PdV
when we want to express U = U(T ,V )
This expression is fully general, and applies to nonideal substances
Note the advantages of this expression for dU for practical calculations: you can computechanges in internal energy purely in terms of the heat capacity and the equation of state,and you do not need to measure changes in entropy to do it
Next we will compute ∆U’s for nonideal substances given their heat capacities and equationsof state
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 150 / 196
![Page 445: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/445.jpg)
Towards a general expression for internal energy changes in terms oftemperature and volume
You can view the term T(
∂P∂T
)V
as a “correction required to convert the term TdS into
Cv dT ”
So we have
dU = NCv dT +
[T
(∂P
∂T
)V
− P
]dV
as an alternative todU = TdS − PdV
when we want to express U = U(T ,V )
This expression is fully general, and applies to nonideal substances
Note the advantages of this expression for dU for practical calculations: you can computechanges in internal energy purely in terms of the heat capacity and the equation of state,and you do not need to measure changes in entropy to do it
Next we will compute ∆U’s for nonideal substances given their heat capacities and equationsof state
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 150 / 196
![Page 446: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/446.jpg)
Towards a general expression for internal energy changes in terms oftemperature and volume
You can view the term T(
∂P∂T
)V
as a “correction required to convert the term TdS into
Cv dT ”
So we have
dU = NCv dT +
[T
(∂P
∂T
)V
− P
]dV
as an alternative todU = TdS − PdV
when we want to express U = U(T ,V )
This expression is fully general, and applies to nonideal substances
Note the advantages of this expression for dU for practical calculations: you can computechanges in internal energy purely in terms of the heat capacity and the equation of state,and you do not need to measure changes in entropy to do it
Next we will compute ∆U’s for nonideal substances given their heat capacities and equationsof state
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 150 / 196
![Page 447: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/447.jpg)
Towards a general expression for internal energy changes in terms oftemperature and volume
You can view the term T(
∂P∂T
)V
as a “correction required to convert the term TdS into
Cv dT ”
So we have
dU = NCv dT +
[T
(∂P
∂T
)V
− P
]dV
as an alternative todU = TdS − PdV
when we want to express U = U(T ,V )
This expression is fully general, and applies to nonideal substances
Note the advantages of this expression for dU for practical calculations: you can computechanges in internal energy purely in terms of the heat capacity and the equation of state,and you do not need to measure changes in entropy to do it
Next we will compute ∆U’s for nonideal substances given their heat capacities and equationsof state
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 150 / 196
![Page 448: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/448.jpg)
∆U for isothermal expansion of a nonideal gas
Example: what is ∆U for an isothermal expansion of a nonideal gas? Note that it is notnecessarily = 0 as for an ideal gas; the internal energy can depend explicitly on the volume(the interactions between gas molecules are not negligible)
Isothermal process:
dU = NCv dT +
[T
(∂P
∂T
)V
− P
]dV
=
[T
(∂P
∂T
)V
− P
]dV
Integral formulation:
∆U =
∫ V2
V1
[T
(∂P
∂T
)V
− P
]dV
Note ∆U 6= 0 for an isothermal process!
Evaluation of ∆U requires an equation of state.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 151 / 196
![Page 449: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/449.jpg)
Equations of state for nonideal gases
Nonideal gas equations of state, like the ideal gas law, are often determined empirically bymeasurements of state variables of a gas under different conditions
van der Waals equation of state:
P =RT
V − b−
a
V 2
Physical interpretation: b is the molar volume excluded by the finite size of the gasmolecules; a is a measure of the strength of attraction between gas molecules (note that atthe same T , P is lower due to attraction at smaller V ).
Peng-Robinson equation of state (extension of van der Waals equation):
P =RT
V − b−
a(T )
V (V + b) + b(V − b)
Virial equation of state:
PV = RT
(1 +
B1(T )
V+
B2(T )
V 2+ · · ·
)Physical interpretation: the correction terms are are expansion in powers of the density 1
Vof
the gas, with the ideal gas law holding at very low densities
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 152 / 196
![Page 450: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/450.jpg)
∆U for isothermal expansion of a nonideal gas (cont’d)
Now consider calculation of ∆U for the isothermal expansion of a gas that obeys the van derWaals equation of state.
Isothermal process:
dU = NCv dT +
[T
(∂P
∂T
)V
− P
]dV
=
[T
(∂P
∂T
)V
− P
]dV
van der Waals:
P =RT
V − b−
a
V 2
So(
∂P∂T
)V
= RV−b
and
T
(∂P
∂T
)V
− P =RT
V − b−
RT
V − b+
a
V 2
=a
V 2
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 153 / 196
![Page 451: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/451.jpg)
∆U for isothermal expansion of a nonideal gas (cont’d)
∆U for isothermal expansion of van der Waals gas:
∆U =
∫ V2
V1
[T
(∂P
∂T
)V
− P
]dV
=
∫ V2
V1
a
V 2dV
=
∫ V2
V1
N2a
V 2dV
= −N2a
V2+
N2a
V1
∆U > 0 for an expansion (V2 > V1) because we needed to pull gas molecules apart, whichrequired the input of energy
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 154 / 196
![Page 452: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/452.jpg)
Computation of internal energy changes for nonideal gases: changes in Tand V
Now consider computation of the internal energy change for a nonideal gas that undergoes achange from V1,T1 to V2,T2
∆U = U(T2,V2)− U(T1,V1)
We can choose any path we want in order to do the computation; for convenience choosethose consist of steps where only one state variable is changing at a time
Consider first path consisting of i) a step from T1,V1 to T1,V2, followed by ii) a step fromT1,V2 to T2,V2; ∆U = ∆U1 + ∆U2
Step i): ∆U1 =∫ V2
V1
(∂U∂V
)T =T1
dV - internal energy change due to volume change at
constant temperature (this term is 0 for an ideal gas). We just looked at this term.
Step ii): ∆U2 = N∫ T2
T1Cv (V2,T ) dT .
See state variable diagram
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 155 / 196
![Page 453: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/453.jpg)
Computation of heat for ideal vs nonideal gas processes
Now consider the computation of heat for a nonideal gas process. We first start by recallingour results for ideal gases. Assume one mole of gas.
For an ideal gas undergoing constant volume process, dQ = NCv dT ,
For a constant pressure (isobaric) process,
dQ = NCpdT
= NCv dT + NRdT
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 156 / 196
![Page 454: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/454.jpg)
Computation of heat for nonideal gas processes
In general, from dU = dQ + dW ,
dQ = dU − dW
= dU + PdV
Check consistency: for an ideal gas undergoing an isobaric process,
dQ = dU + PdV
= NCv dT + Pd(RT/P)
= NCv dT + NRdT
= N(Cv + R)dT
which is consistent with the expression we have used above.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 157 / 196
![Page 455: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/455.jpg)
Computation of heat for nonideal gas processes (cont’d)
In general, we have
dQ = dU + PdV
This is expression is always true, but we want the rhs to be expressed in terms of dT and dV
To achieve this, just substitute our expression for dU in terms of changes in temperature andvolume, to get
dQ = NCv dT +
[T
(∂P
∂T
)V
− P
]dV + PdV
= NCv dT + T
(∂P
∂T
)v
dV
This is a general expression for heat exchanged, given in terms of changes in state variables
Note we still have dW = −PdV for work
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 158 / 196
![Page 456: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/456.jpg)
Example: Heat Q and work W for isothermal expansion of a nonideal gas
Now consider calculation of Q for the isothermal expansion of a gas that obeys the van derWaals equation of state.
Isothermal process:
dQ = NCv dT + T
(∂P
∂T
)V
dV
= T
(∂P
∂T
)V
dV
since isothermal.
van der Waals:
P =RT
V − b−
a
V 2
Recall from above that T(
∂P∂T
)V
= RTV−b
. Hence for heat we have
Q =
∫ V2
V1
RTVN− b
dV
= NRT ln
(V2N− b
V1N− b
)
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 159 / 196
![Page 457: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/457.jpg)
Example: Heat Q and work W for isothermal expansion of a nonideal gas(cont’d)
Hence for heat we have
Q =
∫ V2
V1
RTVN− b
dV
= NRT ln
(V2N− b
V1N− b
)
For work we have
W = −∫ V2
V1
PdV
= −∫ V2
V1
RTVN− b−
N2a
V 2dV
= −NRT ln
(V2N− b
V1N− b
)+ N2a
(1
V1−
1
V2
)
Compare Q = NRT ln(
V2V1
), W = −NRT ln
(V2V1
)for an ideal gas
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 160 / 196
![Page 458: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/458.jpg)
Summary of equations for internal energy, work, heat and entropy fornonideal substances, in terms of T ,V
Listing our new equations:
1 Internal energy: dU = NCv dT +[
T(
∂P∂T
)V− P
]dV
2 Work: dW = −PdV3 Heat: dQ = dU − dW = NCv dT + T
(∂P∂T
)V
dV
4 Entropy: dS = dQ/T = 1T NCv dT +
(∂P∂T
)V
dV
Remember that you need heat capacity information and an equation of state to apply theseexpressions
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 161 / 196
![Page 459: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/459.jpg)
Computation of entropy changes for ideal vs nonideal gases
Now consider the computation of ∆S for a nonideal gas. We first start by recalling ourresults for ideal gases. Recall dS = 1
TdQ. Assume one mole of gas.
For an ideal gas undergoing constant volume process, since dQ = NCv dT , we useddS = 1
TNCv dT .
For a constant pressure (isobaric) process, since dQ = NCpdT , we used
dS =1
TdQ
=1
TNCpdT
=1
TN(Cv + NR)dT
=1
TNCv dT +
1
TNRdT
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 162 / 196
![Page 460: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/460.jpg)
Computation of entropy changes for nonideal gases (cont’d)
In general, we have
dS =1
TdQ
=1
T(dU − dW )
=1
TdU +
P
TdV
This is expression is always true, but we want the rhs to be expressed in terms of dT and dV
To achieve this, just substitute our expression for dU in terms of changes in temperature andvolume, to get
dS =1
T
{NCv dT +
[T
(∂P
∂T
)V
− P
]dV
}+
P
TdV
=NCv
TdT +
(∂P
∂T
)v
dV
This is a general expression for heat exchanged, given in terms of changes in state variables
For an ideal gas, dS = 1T
NCv dT + NRV
dV
Remember that entropy changes ∆S are independent of path but heat Q exchanged is not
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 163 / 196
![Page 461: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/461.jpg)
Computation of internal energy changes for nonideal gases: changes in Tand V
Given heat capacity information and an equation of state, we can compute ∆U for anythermodynamic process for any substance.
Heat capacities are usually tabulated at (or provided as functions with parameters given at)very low pressures (i.e., ideal gas limit). These heat capacities are denoted by a ∗; e.g., C∗v .This will typically be given to us directly.
Hence we typically use paths where we only need to know the heat capacity (or heat capacityas function of T ) for the corresponding ideal gas.
Thus consider the following alternate path for the process above:
Step i): ∆U1 =∫∞
V1
(∂U∂V
)T =T1
dV - internal energy change due to volume change at
constant temperature (this term is 0 for an ideal gas)
Step ii): ∆U2 =∫ T2
T1NC∗v (T ) dT
Step iii): ∆U3 =∫ V2∞
(∂U∂V
)T =T2
dV
See state variable diagram
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 164 / 196
![Page 462: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/462.jpg)
Computation of internal energy changes for nonideal gases: changes in Tand V
Consider again the van der Waals gas:
∆U1 =
∫ ∞V1
(∂U
∂V
)T =T1
dV
=
∫ ∞V1
a
V 2dV
=N2a
V1
∆U2 =∫ T2
T1NC∗v (T ) dT
∆U3 =
∫ V2
∞
(∂U
∂V
)T =T2
dV
=
∫ V2
∞
a
V 2dV
= −N2a
V2
∆U = ∆U1 + ∆U2 + ∆U3
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 165 / 196
![Page 463: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/463.jpg)
Calculating changes in thermodynamic potentials for real gases
In addition to ∆U, we can compute changes in any thermodynamic potential like ∆H givenwhat we have learned
E.g., ∆H = ∆U + ∆(PV ), where we have seen how to compute U and we can find P givenV ,T from the equation of state
You may be asked to compute changes in these thermodynamic potentials for real gases
One point we have not yet considered carefully: how to compute Q,W for processes that areneither isothermal nor isovolumetric
Note for the latter, we need to consider details of the path; the calculations can be a littlemore complicated
However, recall that for isobaric processes, we applied Q = ∆H. We may revisit theseproblems later
On the homework, you are studying changes in thermodynamic potentials for isobaricprocesses, which are diagonal lines on V ,T plots
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 166 / 196
![Page 464: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/464.jpg)
Calculating changes in thermodynamic potentials for real gases
In addition to ∆U, we can compute changes in any thermodynamic potential like ∆H givenwhat we have learned
E.g., ∆H = ∆U + ∆(PV ), where we have seen how to compute U and we can find P givenV ,T from the equation of state
You may be asked to compute changes in these thermodynamic potentials for real gases
One point we have not yet considered carefully: how to compute Q,W for processes that areneither isothermal nor isovolumetric
Note for the latter, we need to consider details of the path; the calculations can be a littlemore complicated
However, recall that for isobaric processes, we applied Q = ∆H. We may revisit theseproblems later
On the homework, you are studying changes in thermodynamic potentials for isobaricprocesses, which are diagonal lines on V ,T plots
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 166 / 196
![Page 465: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/465.jpg)
Calculating changes in thermodynamic potentials for real gases
In addition to ∆U, we can compute changes in any thermodynamic potential like ∆H givenwhat we have learned
E.g., ∆H = ∆U + ∆(PV ), where we have seen how to compute U and we can find P givenV ,T from the equation of state
You may be asked to compute changes in these thermodynamic potentials for real gases
One point we have not yet considered carefully: how to compute Q,W for processes that areneither isothermal nor isovolumetric
Note for the latter, we need to consider details of the path; the calculations can be a littlemore complicated
However, recall that for isobaric processes, we applied Q = ∆H. We may revisit theseproblems later
On the homework, you are studying changes in thermodynamic potentials for isobaricprocesses, which are diagonal lines on V ,T plots
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 166 / 196
![Page 466: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/466.jpg)
Calculating changes in thermodynamic potentials for real gases
In addition to ∆U, we can compute changes in any thermodynamic potential like ∆H givenwhat we have learned
E.g., ∆H = ∆U + ∆(PV ), where we have seen how to compute U and we can find P givenV ,T from the equation of state
You may be asked to compute changes in these thermodynamic potentials for real gases
One point we have not yet considered carefully: how to compute Q,W for processes that areneither isothermal nor isovolumetric
Note for the latter, we need to consider details of the path; the calculations can be a littlemore complicated
However, recall that for isobaric processes, we applied Q = ∆H. We may revisit theseproblems later
On the homework, you are studying changes in thermodynamic potentials for isobaricprocesses, which are diagonal lines on V ,T plots
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 166 / 196
![Page 467: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/467.jpg)
Calculating changes in thermodynamic potentials for real gases
In addition to ∆U, we can compute changes in any thermodynamic potential like ∆H givenwhat we have learned
E.g., ∆H = ∆U + ∆(PV ), where we have seen how to compute U and we can find P givenV ,T from the equation of state
You may be asked to compute changes in these thermodynamic potentials for real gases
One point we have not yet considered carefully: how to compute Q,W for processes that areneither isothermal nor isovolumetric
Note for the latter, we need to consider details of the path; the calculations can be a littlemore complicated
However, recall that for isobaric processes, we applied Q = ∆H. We may revisit theseproblems later
On the homework, you are studying changes in thermodynamic potentials for isobaricprocesses, which are diagonal lines on V ,T plots
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 166 / 196
![Page 468: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/468.jpg)
Calculating changes in thermodynamic potentials for real gases
In addition to ∆U, we can compute changes in any thermodynamic potential like ∆H givenwhat we have learned
E.g., ∆H = ∆U + ∆(PV ), where we have seen how to compute U and we can find P givenV ,T from the equation of state
You may be asked to compute changes in these thermodynamic potentials for real gases
One point we have not yet considered carefully: how to compute Q,W for processes that areneither isothermal nor isovolumetric
Note for the latter, we need to consider details of the path; the calculations can be a littlemore complicated
However, recall that for isobaric processes, we applied Q = ∆H. We may revisit theseproblems later
On the homework, you are studying changes in thermodynamic potentials for isobaricprocesses, which are diagonal lines on V ,T plots
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 166 / 196
![Page 469: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/469.jpg)
Calculating changes in thermodynamic potentials for real gases
In addition to ∆U, we can compute changes in any thermodynamic potential like ∆H givenwhat we have learned
E.g., ∆H = ∆U + ∆(PV ), where we have seen how to compute U and we can find P givenV ,T from the equation of state
You may be asked to compute changes in these thermodynamic potentials for real gases
One point we have not yet considered carefully: how to compute Q,W for processes that areneither isothermal nor isovolumetric
Note for the latter, we need to consider details of the path; the calculations can be a littlemore complicated
However, recall that for isobaric processes, we applied Q = ∆H. We may revisit theseproblems later
On the homework, you are studying changes in thermodynamic potentials for isobaricprocesses, which are diagonal lines on V ,T plots
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 166 / 196
![Page 470: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/470.jpg)
More on thermodynamic potentials
Another important thermodynamic potential is the Gibbs free energy, defined as:
G = U + PV − TS
Note
dG = dU + d(PV )− d(TS)
= dH − d(TS)
= TdS − PdV + PdV + VdP − TdS − SdT
= VdP − SdT
We can compute ∆G for any real substance according to
∆G = ∆H −∆(TS)
= ∆U + ∆(PV )−∆(TS)
where ∆U is computed according to the equations we introduced in Chapter 6 (the sameholds for ∆H)
You can apply same principles we learned to calculate ∆G ’s for real gases
We will study practical applications of ∆G shortly.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 167 / 196
![Page 471: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/471.jpg)
More on thermodynamic potentials
Another important thermodynamic potential is the Gibbs free energy, defined as:
G = U + PV − TS
Note
dG = dU + d(PV )− d(TS)
= dH − d(TS)
= TdS − PdV + PdV + VdP − TdS − SdT
= VdP − SdT
We can compute ∆G for any real substance according to
∆G = ∆H −∆(TS)
= ∆U + ∆(PV )−∆(TS)
where ∆U is computed according to the equations we introduced in Chapter 6 (the sameholds for ∆H)
You can apply same principles we learned to calculate ∆G ’s for real gases
We will study practical applications of ∆G shortly.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 167 / 196
![Page 472: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/472.jpg)
More on thermodynamic potentials
Another important thermodynamic potential is the Gibbs free energy, defined as:
G = U + PV − TS
Note
dG = dU + d(PV )− d(TS)
= dH − d(TS)
= TdS − PdV + PdV + VdP − TdS − SdT
= VdP − SdT
We can compute ∆G for any real substance according to
∆G = ∆H −∆(TS)
= ∆U + ∆(PV )−∆(TS)
where ∆U is computed according to the equations we introduced in Chapter 6 (the sameholds for ∆H)
You can apply same principles we learned to calculate ∆G ’s for real gases
We will study practical applications of ∆G shortly.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 167 / 196
![Page 473: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/473.jpg)
More on thermodynamic potentials
Another important thermodynamic potential is the Gibbs free energy, defined as:
G = U + PV − TS
Note
dG = dU + d(PV )− d(TS)
= dH − d(TS)
= TdS − PdV + PdV + VdP − TdS − SdT
= VdP − SdT
We can compute ∆G for any real substance according to
∆G = ∆H −∆(TS)
= ∆U + ∆(PV )−∆(TS)
where ∆U is computed according to the equations we introduced in Chapter 6 (the sameholds for ∆H)
You can apply same principles we learned to calculate ∆G ’s for real gases
We will study practical applications of ∆G shortly.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 167 / 196
![Page 474: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/474.jpg)
More on thermodynamic potentials
Another important thermodynamic potential is the Gibbs free energy, defined as:
G = U + PV − TS
Note
dG = dU + d(PV )− d(TS)
= dH − d(TS)
= TdS − PdV + PdV + VdP − TdS − SdT
= VdP − SdT
We can compute ∆G for any real substance according to
∆G = ∆H −∆(TS)
= ∆U + ∆(PV )−∆(TS)
where ∆U is computed according to the equations we introduced in Chapter 6 (the sameholds for ∆H)
You can apply same principles we learned to calculate ∆G ’s for real gases
We will study practical applications of ∆G shortly.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 167 / 196
![Page 475: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/475.jpg)
Outline
1 What is Thermodynamics?
2 Some Thermodynamics Terminology
3 Basic concepts of thermodynamics
4 Thermodynamic equations of state
5 Conservation of Mass
6 Integral formulation of mass balance
7 Multicomponent mass balance
8 Conservation of energyEnergy balance
9 Towards the 2nd Law of Thermodynamics
10 Toward engineering applications: thermodynamic cycles and heat engines
11 Thermodynamic properties of real substances (not ideal gases)Computation of heat and work for thermodynamic processes involving nonideal substancesComputation of entropy changes for thermodynamic processes involving nonideal substances
12 Outline of remaining topics and schedule
13 Further analysis of the behavior of real gases
14 Phase equilibrium
15 More on Gibbs free energy and applications to phase equilibrium
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 168 / 196
![Page 476: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/476.jpg)
Outline of remaining topics and schedule
Schedule for remaining classes:
1 Thurs 11-15: Further analysis of van der Waals gases; examples of problems on critical pointcalculations
2 Next Homework (further calculations of thermodynamic potential, heat, work changes with vdW gas;critical point calculations): Due Tues Nov 27th after break (can’t be late since solns discussed inclass that day)
3 Tues Nov 20th: a) (30 mins) Conceptual discussion of phase equilibrium (how to draw a vapor-liquidcoexistence line), for final exam. This is last (and brief) topic for the class. Most points to bediscussed will not appear on midterm. B) (50 mins) Since not everyone present, remainder of classdedicated to solving Homework problems in groups.
4 Tues Nov 27th: In class discussion of latest Homework solutions given soln key. If time permits,repeat conceptual discussion of phase equilibrium material, for reinforcement and those who missedprevious lecture.
Midterm: Thurs Nov 29th. Covers:
1 Thermodynamic cycles with mass flow2 Thermodynamic calculations with real gases.3 Critical point calculations on vdW gas-like equations4 Perhaps a couple of simple conceptual questions on what happens below the critical point of real
gases (knowing that two phases form, why, etc)
Tues Dec 4th: Finishing the conceptual discussion of phase equilibrium for final exam (30mins); overall review of concepts and types of problems to appear on cumulative final
Assignment of practice problem set
Thurs Dec 6th: Working on practice problem set in class
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 169 / 196
![Page 477: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/477.jpg)
Outline of remaining topics and schedule
Schedule for remaining classes:1 Thurs 11-15: Further analysis of van der Waals gases; examples of problems on critical point
calculations
2 Next Homework (further calculations of thermodynamic potential, heat, work changes with vdW gas;critical point calculations): Due Tues Nov 27th after break (can’t be late since solns discussed inclass that day)
3 Tues Nov 20th: a) (30 mins) Conceptual discussion of phase equilibrium (how to draw a vapor-liquidcoexistence line), for final exam. This is last (and brief) topic for the class. Most points to bediscussed will not appear on midterm. B) (50 mins) Since not everyone present, remainder of classdedicated to solving Homework problems in groups.
4 Tues Nov 27th: In class discussion of latest Homework solutions given soln key. If time permits,repeat conceptual discussion of phase equilibrium material, for reinforcement and those who missedprevious lecture.
Midterm: Thurs Nov 29th. Covers:
1 Thermodynamic cycles with mass flow2 Thermodynamic calculations with real gases.3 Critical point calculations on vdW gas-like equations4 Perhaps a couple of simple conceptual questions on what happens below the critical point of real
gases (knowing that two phases form, why, etc)
Tues Dec 4th: Finishing the conceptual discussion of phase equilibrium for final exam (30mins); overall review of concepts and types of problems to appear on cumulative final
Assignment of practice problem set
Thurs Dec 6th: Working on practice problem set in class
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 169 / 196
![Page 478: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/478.jpg)
Outline of remaining topics and schedule
Schedule for remaining classes:1 Thurs 11-15: Further analysis of van der Waals gases; examples of problems on critical point
calculations2 Next Homework (further calculations of thermodynamic potential, heat, work changes with vdW gas;
critical point calculations): Due Tues Nov 27th after break (can’t be late since solns discussed inclass that day)
3 Tues Nov 20th: a) (30 mins) Conceptual discussion of phase equilibrium (how to draw a vapor-liquidcoexistence line), for final exam. This is last (and brief) topic for the class. Most points to bediscussed will not appear on midterm. B) (50 mins) Since not everyone present, remainder of classdedicated to solving Homework problems in groups.
4 Tues Nov 27th: In class discussion of latest Homework solutions given soln key. If time permits,repeat conceptual discussion of phase equilibrium material, for reinforcement and those who missedprevious lecture.
Midterm: Thurs Nov 29th. Covers:
1 Thermodynamic cycles with mass flow2 Thermodynamic calculations with real gases.3 Critical point calculations on vdW gas-like equations4 Perhaps a couple of simple conceptual questions on what happens below the critical point of real
gases (knowing that two phases form, why, etc)
Tues Dec 4th: Finishing the conceptual discussion of phase equilibrium for final exam (30mins); overall review of concepts and types of problems to appear on cumulative final
Assignment of practice problem set
Thurs Dec 6th: Working on practice problem set in class
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 169 / 196
![Page 479: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/479.jpg)
Outline of remaining topics and schedule
Schedule for remaining classes:1 Thurs 11-15: Further analysis of van der Waals gases; examples of problems on critical point
calculations2 Next Homework (further calculations of thermodynamic potential, heat, work changes with vdW gas;
critical point calculations): Due Tues Nov 27th after break (can’t be late since solns discussed inclass that day)
3 Tues Nov 20th: a) (30 mins) Conceptual discussion of phase equilibrium (how to draw a vapor-liquidcoexistence line), for final exam. This is last (and brief) topic for the class. Most points to bediscussed will not appear on midterm. B) (50 mins) Since not everyone present, remainder of classdedicated to solving Homework problems in groups.
4 Tues Nov 27th: In class discussion of latest Homework solutions given soln key. If time permits,repeat conceptual discussion of phase equilibrium material, for reinforcement and those who missedprevious lecture.
Midterm: Thurs Nov 29th. Covers:
1 Thermodynamic cycles with mass flow2 Thermodynamic calculations with real gases.3 Critical point calculations on vdW gas-like equations4 Perhaps a couple of simple conceptual questions on what happens below the critical point of real
gases (knowing that two phases form, why, etc)
Tues Dec 4th: Finishing the conceptual discussion of phase equilibrium for final exam (30mins); overall review of concepts and types of problems to appear on cumulative final
Assignment of practice problem set
Thurs Dec 6th: Working on practice problem set in class
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 169 / 196
![Page 480: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/480.jpg)
Outline of remaining topics and schedule
Schedule for remaining classes:1 Thurs 11-15: Further analysis of van der Waals gases; examples of problems on critical point
calculations2 Next Homework (further calculations of thermodynamic potential, heat, work changes with vdW gas;
critical point calculations): Due Tues Nov 27th after break (can’t be late since solns discussed inclass that day)
3 Tues Nov 20th: a) (30 mins) Conceptual discussion of phase equilibrium (how to draw a vapor-liquidcoexistence line), for final exam. This is last (and brief) topic for the class. Most points to bediscussed will not appear on midterm. B) (50 mins) Since not everyone present, remainder of classdedicated to solving Homework problems in groups.
4 Tues Nov 27th: In class discussion of latest Homework solutions given soln key. If time permits,repeat conceptual discussion of phase equilibrium material, for reinforcement and those who missedprevious lecture.
Midterm: Thurs Nov 29th. Covers:
1 Thermodynamic cycles with mass flow2 Thermodynamic calculations with real gases.3 Critical point calculations on vdW gas-like equations4 Perhaps a couple of simple conceptual questions on what happens below the critical point of real
gases (knowing that two phases form, why, etc)
Tues Dec 4th: Finishing the conceptual discussion of phase equilibrium for final exam (30mins); overall review of concepts and types of problems to appear on cumulative final
Assignment of practice problem set
Thurs Dec 6th: Working on practice problem set in class
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 169 / 196
![Page 481: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/481.jpg)
Outline of remaining topics and schedule
Schedule for remaining classes:1 Thurs 11-15: Further analysis of van der Waals gases; examples of problems on critical point
calculations2 Next Homework (further calculations of thermodynamic potential, heat, work changes with vdW gas;
critical point calculations): Due Tues Nov 27th after break (can’t be late since solns discussed inclass that day)
3 Tues Nov 20th: a) (30 mins) Conceptual discussion of phase equilibrium (how to draw a vapor-liquidcoexistence line), for final exam. This is last (and brief) topic for the class. Most points to bediscussed will not appear on midterm. B) (50 mins) Since not everyone present, remainder of classdedicated to solving Homework problems in groups.
4 Tues Nov 27th: In class discussion of latest Homework solutions given soln key. If time permits,repeat conceptual discussion of phase equilibrium material, for reinforcement and those who missedprevious lecture.
Midterm: Thurs Nov 29th. Covers:
1 Thermodynamic cycles with mass flow2 Thermodynamic calculations with real gases.3 Critical point calculations on vdW gas-like equations4 Perhaps a couple of simple conceptual questions on what happens below the critical point of real
gases (knowing that two phases form, why, etc)
Tues Dec 4th: Finishing the conceptual discussion of phase equilibrium for final exam (30mins); overall review of concepts and types of problems to appear on cumulative final
Assignment of practice problem set
Thurs Dec 6th: Working on practice problem set in class
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 169 / 196
![Page 482: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/482.jpg)
Outline of remaining topics and schedule
Schedule for remaining classes:1 Thurs 11-15: Further analysis of van der Waals gases; examples of problems on critical point
calculations2 Next Homework (further calculations of thermodynamic potential, heat, work changes with vdW gas;
critical point calculations): Due Tues Nov 27th after break (can’t be late since solns discussed inclass that day)
3 Tues Nov 20th: a) (30 mins) Conceptual discussion of phase equilibrium (how to draw a vapor-liquidcoexistence line), for final exam. This is last (and brief) topic for the class. Most points to bediscussed will not appear on midterm. B) (50 mins) Since not everyone present, remainder of classdedicated to solving Homework problems in groups.
4 Tues Nov 27th: In class discussion of latest Homework solutions given soln key. If time permits,repeat conceptual discussion of phase equilibrium material, for reinforcement and those who missedprevious lecture.
Midterm: Thurs Nov 29th. Covers:1 Thermodynamic cycles with mass flow2 Thermodynamic calculations with real gases.3 Critical point calculations on vdW gas-like equations4 Perhaps a couple of simple conceptual questions on what happens below the critical point of real
gases (knowing that two phases form, why, etc)
Tues Dec 4th: Finishing the conceptual discussion of phase equilibrium for final exam (30mins); overall review of concepts and types of problems to appear on cumulative final
Assignment of practice problem set
Thurs Dec 6th: Working on practice problem set in class
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 169 / 196
![Page 483: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/483.jpg)
Outline of remaining topics and schedule
Schedule for remaining classes:1 Thurs 11-15: Further analysis of van der Waals gases; examples of problems on critical point
calculations2 Next Homework (further calculations of thermodynamic potential, heat, work changes with vdW gas;
critical point calculations): Due Tues Nov 27th after break (can’t be late since solns discussed inclass that day)
3 Tues Nov 20th: a) (30 mins) Conceptual discussion of phase equilibrium (how to draw a vapor-liquidcoexistence line), for final exam. This is last (and brief) topic for the class. Most points to bediscussed will not appear on midterm. B) (50 mins) Since not everyone present, remainder of classdedicated to solving Homework problems in groups.
4 Tues Nov 27th: In class discussion of latest Homework solutions given soln key. If time permits,repeat conceptual discussion of phase equilibrium material, for reinforcement and those who missedprevious lecture.
Midterm: Thurs Nov 29th. Covers:1 Thermodynamic cycles with mass flow2 Thermodynamic calculations with real gases.3 Critical point calculations on vdW gas-like equations4 Perhaps a couple of simple conceptual questions on what happens below the critical point of real
gases (knowing that two phases form, why, etc)
Tues Dec 4th: Finishing the conceptual discussion of phase equilibrium for final exam (30mins); overall review of concepts and types of problems to appear on cumulative final
Assignment of practice problem set
Thurs Dec 6th: Working on practice problem set in class
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 169 / 196
![Page 484: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/484.jpg)
Outline of remaining topics and schedule
Schedule for remaining classes:1 Thurs 11-15: Further analysis of van der Waals gases; examples of problems on critical point
calculations2 Next Homework (further calculations of thermodynamic potential, heat, work changes with vdW gas;
critical point calculations): Due Tues Nov 27th after break (can’t be late since solns discussed inclass that day)
3 Tues Nov 20th: a) (30 mins) Conceptual discussion of phase equilibrium (how to draw a vapor-liquidcoexistence line), for final exam. This is last (and brief) topic for the class. Most points to bediscussed will not appear on midterm. B) (50 mins) Since not everyone present, remainder of classdedicated to solving Homework problems in groups.
4 Tues Nov 27th: In class discussion of latest Homework solutions given soln key. If time permits,repeat conceptual discussion of phase equilibrium material, for reinforcement and those who missedprevious lecture.
Midterm: Thurs Nov 29th. Covers:1 Thermodynamic cycles with mass flow2 Thermodynamic calculations with real gases.3 Critical point calculations on vdW gas-like equations4 Perhaps a couple of simple conceptual questions on what happens below the critical point of real
gases (knowing that two phases form, why, etc)
Tues Dec 4th: Finishing the conceptual discussion of phase equilibrium for final exam (30mins); overall review of concepts and types of problems to appear on cumulative final
Assignment of practice problem set
Thurs Dec 6th: Working on practice problem set in class
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 169 / 196
![Page 485: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/485.jpg)
Outline of remaining topics and schedule
Schedule for remaining classes:1 Thurs 11-15: Further analysis of van der Waals gases; examples of problems on critical point
calculations2 Next Homework (further calculations of thermodynamic potential, heat, work changes with vdW gas;
critical point calculations): Due Tues Nov 27th after break (can’t be late since solns discussed inclass that day)
3 Tues Nov 20th: a) (30 mins) Conceptual discussion of phase equilibrium (how to draw a vapor-liquidcoexistence line), for final exam. This is last (and brief) topic for the class. Most points to bediscussed will not appear on midterm. B) (50 mins) Since not everyone present, remainder of classdedicated to solving Homework problems in groups.
4 Tues Nov 27th: In class discussion of latest Homework solutions given soln key. If time permits,repeat conceptual discussion of phase equilibrium material, for reinforcement and those who missedprevious lecture.
Midterm: Thurs Nov 29th. Covers:1 Thermodynamic cycles with mass flow2 Thermodynamic calculations with real gases.3 Critical point calculations on vdW gas-like equations4 Perhaps a couple of simple conceptual questions on what happens below the critical point of real
gases (knowing that two phases form, why, etc)
Tues Dec 4th: Finishing the conceptual discussion of phase equilibrium for final exam (30mins); overall review of concepts and types of problems to appear on cumulative final
Assignment of practice problem set
Thurs Dec 6th: Working on practice problem set in class
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 169 / 196
![Page 486: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/486.jpg)
Outline
1 What is Thermodynamics?
2 Some Thermodynamics Terminology
3 Basic concepts of thermodynamics
4 Thermodynamic equations of state
5 Conservation of Mass
6 Integral formulation of mass balance
7 Multicomponent mass balance
8 Conservation of energyEnergy balance
9 Towards the 2nd Law of Thermodynamics
10 Toward engineering applications: thermodynamic cycles and heat engines
11 Thermodynamic properties of real substances (not ideal gases)Computation of heat and work for thermodynamic processes involving nonideal substancesComputation of entropy changes for thermodynamic processes involving nonideal substances
12 Outline of remaining topics and schedule
13 Further analysis of the behavior of real gases
14 Phase equilibrium
15 More on Gibbs free energy and applications to phase equilibrium
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 170 / 196
![Page 487: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/487.jpg)
Equations of state of real gases and appearance of a second phase
Recall we said that if we specify any two state variables of a system, the third is determinedby the state equation
For the ideal gas law PV = NRT , we can see that the state equation uniquely determinesthe third state variable
We have previously looked at isotherms of ideal gases (e.g., for isothermal expansions)
What about the van der Waals equation of state?
P =RT
V − b−
a
V 2
Note that if we specify P,T for a van der Waals equation of state, V is not uniquelydetermined - there are in fact multiple solutions for V . See PV diagram of a vdW isotherm
How can we explain multiple solutions for V by just looking at the state equation?
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 171 / 196
![Page 488: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/488.jpg)
Equations of state of real gases and appearance of a second phase
Recall we said that if we specify any two state variables of a system, the third is determinedby the state equation
For the ideal gas law PV = NRT , we can see that the state equation uniquely determinesthe third state variable
We have previously looked at isotherms of ideal gases (e.g., for isothermal expansions)
What about the van der Waals equation of state?
P =RT
V − b−
a
V 2
Note that if we specify P,T for a van der Waals equation of state, V is not uniquelydetermined - there are in fact multiple solutions for V . See PV diagram of a vdW isotherm
How can we explain multiple solutions for V by just looking at the state equation?
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 171 / 196
![Page 489: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/489.jpg)
Equations of state of real gases and appearance of a second phase
Recall we said that if we specify any two state variables of a system, the third is determinedby the state equation
For the ideal gas law PV = NRT , we can see that the state equation uniquely determinesthe third state variable
We have previously looked at isotherms of ideal gases (e.g., for isothermal expansions)
What about the van der Waals equation of state?
P =RT
V − b−
a
V 2
Note that if we specify P,T for a van der Waals equation of state, V is not uniquelydetermined - there are in fact multiple solutions for V . See PV diagram of a vdW isotherm
How can we explain multiple solutions for V by just looking at the state equation?
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 171 / 196
![Page 490: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/490.jpg)
Equations of state of real gases and appearance of a second phase
Recall we said that if we specify any two state variables of a system, the third is determinedby the state equation
For the ideal gas law PV = NRT , we can see that the state equation uniquely determinesthe third state variable
We have previously looked at isotherms of ideal gases (e.g., for isothermal expansions)
What about the van der Waals equation of state?
P =RT
V − b−
a
V 2
Note that if we specify P,T for a van der Waals equation of state, V is not uniquelydetermined - there are in fact multiple solutions for V . See PV diagram of a vdW isotherm
How can we explain multiple solutions for V by just looking at the state equation?
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 171 / 196
![Page 491: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/491.jpg)
Equations of state of real gases and appearance of a second phase
Recall we said that if we specify any two state variables of a system, the third is determinedby the state equation
For the ideal gas law PV = NRT , we can see that the state equation uniquely determinesthe third state variable
We have previously looked at isotherms of ideal gases (e.g., for isothermal expansions)
What about the van der Waals equation of state?
P =RT
V − b−
a
V 2
Note that if we specify P,T for a van der Waals equation of state, V is not uniquelydetermined - there are in fact multiple solutions for V . See PV diagram of a vdW isotherm
How can we explain multiple solutions for V by just looking at the state equation?
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 171 / 196
![Page 492: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/492.jpg)
Equations of state of real gases and appearance of a second phase
Recall we said that if we specify any two state variables of a system, the third is determinedby the state equation
For the ideal gas law PV = NRT , we can see that the state equation uniquely determinesthe third state variable
We have previously looked at isotherms of ideal gases (e.g., for isothermal expansions)
What about the van der Waals equation of state?
P =RT
V − b−
a
V 2
Note that if we specify P,T for a van der Waals equation of state, V is not uniquelydetermined - there are in fact multiple solutions for V . See PV diagram of a vdW isotherm
How can we explain multiple solutions for V by just looking at the state equation?
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 171 / 196
![Page 493: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/493.jpg)
Equations of state of real gases and vapor-liquid equilibria
For a vdW gas, at lower temperatures, there are multiple solutions for V given P,T
Interpretation: below Tc , a liquid phase appears in addition to a gas phase
Above a critical temperature Tc , there is only one viable solution for V given P,T and theliquid phase no longer coexists above this temperature
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 172 / 196
![Page 494: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/494.jpg)
Equations of state of real gases and vapor-liquid equilibria
For a vdW gas, at lower temperatures, there are multiple solutions for V given P,T
Interpretation: below Tc , a liquid phase appears in addition to a gas phase
Above a critical temperature Tc , there is only one viable solution for V given P,T and theliquid phase no longer coexists above this temperature
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 172 / 196
![Page 495: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/495.jpg)
Equations of state of real gases and vapor-liquid equilibria
For a vdW gas, at lower temperatures, there are multiple solutions for V given P,T
Interpretation: below Tc , a liquid phase appears in addition to a gas phase
Above a critical temperature Tc , there is only one viable solution for V given P,T and theliquid phase no longer coexists above this temperature
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 172 / 196
![Page 496: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/496.jpg)
Understanding the shape of isotherms for a van der Waals gas
P =RT
V − b−
a
V 2
To understand shape of vdW isotherms, look at the derivative (slope). P = P(T ,V ) so weneed a partial derivative (
∂P
∂V
)T
= −RT(
V − b)2
+2a
V 3
Compare to that for an ideal gas: (∂P
∂V
)T
= −RT
V 2
The two terms in the vdW derivative compete (one negative, other positive). Below Tc , atcertain V ’s, the second (positive) term dominates and the slope is positive. Otherwise,negative slope.
See picture for why this is positive slope is unphysical
Above Tc ,(
∂P∂V
)T< 0 for all V .
Below Tc , phase separation
Pc , Vc ,Tc is critical point- liquid and vapor can coexist at the same point at Tc
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 173 / 196
![Page 497: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/497.jpg)
Understanding the shape of isotherms for a van der Waals gas
P =RT
V − b−
a
V 2
To understand shape of vdW isotherms, look at the derivative (slope). P = P(T ,V ) so weneed a partial derivative (
∂P
∂V
)T
= −RT(
V − b)2
+2a
V 3
Compare to that for an ideal gas: (∂P
∂V
)T
= −RT
V 2
The two terms in the vdW derivative compete (one negative, other positive). Below Tc , atcertain V ’s, the second (positive) term dominates and the slope is positive. Otherwise,negative slope.
See picture for why this is positive slope is unphysical
Above Tc ,(
∂P∂V
)T< 0 for all V .
Below Tc , phase separation
Pc , Vc ,Tc is critical point- liquid and vapor can coexist at the same point at Tc
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 173 / 196
![Page 498: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/498.jpg)
Understanding the shape of isotherms for a van der Waals gas
P =RT
V − b−
a
V 2
To understand shape of vdW isotherms, look at the derivative (slope). P = P(T ,V ) so weneed a partial derivative (
∂P
∂V
)T
= −RT(
V − b)2
+2a
V 3
Compare to that for an ideal gas: (∂P
∂V
)T
= −RT
V 2
The two terms in the vdW derivative compete (one negative, other positive). Below Tc , atcertain V ’s, the second (positive) term dominates and the slope is positive. Otherwise,negative slope.
See picture for why this is positive slope is unphysical
Above Tc ,(
∂P∂V
)T< 0 for all V .
Below Tc , phase separation
Pc , Vc ,Tc is critical point- liquid and vapor can coexist at the same point at Tc
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 173 / 196
![Page 499: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/499.jpg)
Understanding the shape of isotherms for a van der Waals gas
P =RT
V − b−
a
V 2
To understand shape of vdW isotherms, look at the derivative (slope). P = P(T ,V ) so weneed a partial derivative (
∂P
∂V
)T
= −RT(
V − b)2
+2a
V 3
Compare to that for an ideal gas: (∂P
∂V
)T
= −RT
V 2
The two terms in the vdW derivative compete (one negative, other positive). Below Tc , atcertain V ’s, the second (positive) term dominates and the slope is positive. Otherwise,negative slope.
See picture for why this is positive slope is unphysical
Above Tc ,(
∂P∂V
)T< 0 for all V .
Below Tc , phase separation
Pc , Vc ,Tc is critical point- liquid and vapor can coexist at the same point at Tc
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 173 / 196
![Page 500: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/500.jpg)
Understanding the shape of isotherms for a van der Waals gas
P =RT
V − b−
a
V 2
To understand shape of vdW isotherms, look at the derivative (slope). P = P(T ,V ) so weneed a partial derivative (
∂P
∂V
)T
= −RT(
V − b)2
+2a
V 3
Compare to that for an ideal gas: (∂P
∂V
)T
= −RT
V 2
The two terms in the vdW derivative compete (one negative, other positive). Below Tc , atcertain V ’s, the second (positive) term dominates and the slope is positive. Otherwise,negative slope.
See picture for why this is positive slope is unphysical
Above Tc ,(
∂P∂V
)T< 0 for all V .
Below Tc , phase separation
Pc , Vc ,Tc is critical point- liquid and vapor can coexist at the same point at Tc
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 173 / 196
![Page 501: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/501.jpg)
Understanding the shape of isotherms for a van der Waals gas
P =RT
V − b−
a
V 2
To understand shape of vdW isotherms, look at the derivative (slope). P = P(T ,V ) so weneed a partial derivative (
∂P
∂V
)T
= −RT(
V − b)2
+2a
V 3
Compare to that for an ideal gas: (∂P
∂V
)T
= −RT
V 2
The two terms in the vdW derivative compete (one negative, other positive). Below Tc , atcertain V ’s, the second (positive) term dominates and the slope is positive. Otherwise,negative slope.
See picture for why this is positive slope is unphysical
Above Tc ,(
∂P∂V
)T< 0 for all V .
Below Tc , phase separation
Pc , Vc ,Tc is critical point- liquid and vapor can coexist at the same point at Tc
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 173 / 196
![Page 502: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/502.jpg)
Understanding the shape of isotherms for a van der Waals gas
P =RT
V − b−
a
V 2
To understand shape of vdW isotherms, look at the derivative (slope). P = P(T ,V ) so weneed a partial derivative (
∂P
∂V
)T
= −RT(
V − b)2
+2a
V 3
Compare to that for an ideal gas: (∂P
∂V
)T
= −RT
V 2
The two terms in the vdW derivative compete (one negative, other positive). Below Tc , atcertain V ’s, the second (positive) term dominates and the slope is positive. Otherwise,negative slope.
See picture for why this is positive slope is unphysical
Above Tc ,(
∂P∂V
)T< 0 for all V .
Below Tc , phase separation
Pc , Vc ,Tc is critical point- liquid and vapor can coexist at the same point at Tc
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 173 / 196
![Page 503: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/503.jpg)
Finding critical points of real gases
Problem type 1: How to find the critical point Pc , Vc ,Tc of a real gas?
From the PV diagram of the vdW gas, it is apparent that the curve has an inflection point atT = Tc , V = Vc
This means that finding Pc , Vc ,Tc amounts to finding the inflection point.
At an inflection point, the first and second derivatives should be zero(∂P
∂V
)Tc
= 0 at Vc(∂2P
∂V 2
)Tc
= 0 at Vc
With these two equations, we can find two unknowns Vc ,Tc given the equation of state ofthe gas, i.e., the vdW equation with a, b specified. Exercise with solving such equations.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 174 / 196
![Page 504: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/504.jpg)
Finding critical points of real gases
Problem type 1: How to find the critical point Pc , Vc ,Tc of a real gas?
From the PV diagram of the vdW gas, it is apparent that the curve has an inflection point atT = Tc , V = Vc
This means that finding Pc , Vc ,Tc amounts to finding the inflection point.
At an inflection point, the first and second derivatives should be zero(∂P
∂V
)Tc
= 0 at Vc(∂2P
∂V 2
)Tc
= 0 at Vc
With these two equations, we can find two unknowns Vc ,Tc given the equation of state ofthe gas, i.e., the vdW equation with a, b specified. Exercise with solving such equations.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 174 / 196
![Page 505: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/505.jpg)
Finding critical points of real gases
Problem type 1: How to find the critical point Pc , Vc ,Tc of a real gas?
From the PV diagram of the vdW gas, it is apparent that the curve has an inflection point atT = Tc , V = Vc
This means that finding Pc , Vc ,Tc amounts to finding the inflection point.
At an inflection point, the first and second derivatives should be zero(∂P
∂V
)Tc
= 0 at Vc(∂2P
∂V 2
)Tc
= 0 at Vc
With these two equations, we can find two unknowns Vc ,Tc given the equation of state ofthe gas, i.e., the vdW equation with a, b specified. Exercise with solving such equations.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 174 / 196
![Page 506: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/506.jpg)
Finding critical points of real gases
Problem type 1: How to find the critical point Pc , Vc ,Tc of a real gas?
From the PV diagram of the vdW gas, it is apparent that the curve has an inflection point atT = Tc , V = Vc
This means that finding Pc , Vc ,Tc amounts to finding the inflection point.
At an inflection point, the first and second derivatives should be zero(∂P
∂V
)Tc
= 0 at Vc(∂2P
∂V 2
)Tc
= 0 at Vc
With these two equations, we can find two unknowns Vc ,Tc given the equation of state ofthe gas, i.e., the vdW equation with a, b specified. Exercise with solving such equations.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 174 / 196
![Page 507: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/507.jpg)
Finding critical points of real gases (cont’d)
For vdW gas, what is(
∂P∂V
)Tc
at Vc ?
So (∂P
∂V
)Tc
=−RTc
(Vc − b)2+
2a
V 3c
= 0
Tc =1
R
2a(Vc − b)2
V 3c
What is(
∂2P∂V 2
)Tc
at Vc ?
(∂2P
∂V 2
)Tc
=2RTc
(Vc − b)3−
6a
V 4c
= 0
Substitute Tc from solution to first equation into second equation and solve for Vc
Vc = 3b
Now solve for Tc by substituting Vc into the solution to the first equation:
Tc =8a
27Rb
So we have obtained Vc ,Tc in terms of the parameters a, b of the gas. Can find Pc fromequation of state
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 175 / 196
![Page 508: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/508.jpg)
Finding critical points of real gases (cont’d)
For vdW gas, what is(
∂P∂V
)Tc
at Vc ?
So (∂P
∂V
)Tc
=−RTc
(Vc − b)2+
2a
V 3c
= 0
Tc =1
R
2a(Vc − b)2
V 3c
What is(
∂2P∂V 2
)Tc
at Vc ?
(∂2P
∂V 2
)Tc
=2RTc
(Vc − b)3−
6a
V 4c
= 0
Substitute Tc from solution to first equation into second equation and solve for Vc
Vc = 3b
Now solve for Tc by substituting Vc into the solution to the first equation:
Tc =8a
27Rb
So we have obtained Vc ,Tc in terms of the parameters a, b of the gas. Can find Pc fromequation of state
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 175 / 196
![Page 509: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/509.jpg)
Finding critical points of real gases (cont’d)
For vdW gas, what is(
∂P∂V
)Tc
at Vc ?
So (∂P
∂V
)Tc
=−RTc
(Vc − b)2+
2a
V 3c
= 0
Tc =1
R
2a(Vc − b)2
V 3c
What is(
∂2P∂V 2
)Tc
at Vc ?
(∂2P
∂V 2
)Tc
=2RTc
(Vc − b)3−
6a
V 4c
= 0
Substitute Tc from solution to first equation into second equation and solve for Vc
Vc = 3b
Now solve for Tc by substituting Vc into the solution to the first equation:
Tc =8a
27Rb
So we have obtained Vc ,Tc in terms of the parameters a, b of the gas. Can find Pc fromequation of state
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 175 / 196
![Page 510: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/510.jpg)
Finding critical points of real gases (cont’d)
For vdW gas, what is(
∂P∂V
)Tc
at Vc ?
So (∂P
∂V
)Tc
=−RTc
(Vc − b)2+
2a
V 3c
= 0
Tc =1
R
2a(Vc − b)2
V 3c
What is(
∂2P∂V 2
)Tc
at Vc ?
(∂2P
∂V 2
)Tc
=2RTc
(Vc − b)3−
6a
V 4c
= 0
Substitute Tc from solution to first equation into second equation and solve for Vc
Vc = 3b
Now solve for Tc by substituting Vc into the solution to the first equation:
Tc =8a
27Rb
So we have obtained Vc ,Tc in terms of the parameters a, b of the gas. Can find Pc fromequation of state
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 175 / 196
![Page 511: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/511.jpg)
Finding critical points of real gases (cont’d)
For vdW gas, what is(
∂P∂V
)Tc
at Vc ?
So (∂P
∂V
)Tc
=−RTc
(Vc − b)2+
2a
V 3c
= 0
Tc =1
R
2a(Vc − b)2
V 3c
What is(
∂2P∂V 2
)Tc
at Vc ?
(∂2P
∂V 2
)Tc
=2RTc
(Vc − b)3−
6a
V 4c
= 0
Substitute Tc from solution to first equation into second equation and solve for Vc
Vc = 3b
Now solve for Tc by substituting Vc into the solution to the first equation:
Tc =8a
27Rb
So we have obtained Vc ,Tc in terms of the parameters a, b of the gas. Can find Pc fromequation of state
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 175 / 196
![Page 512: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/512.jpg)
Finding critical points of real gases (cont’d)
For vdW gas, what is(
∂P∂V
)Tc
at Vc ?
So (∂P
∂V
)Tc
=−RTc
(Vc − b)2+
2a
V 3c
= 0
Tc =1
R
2a(Vc − b)2
V 3c
What is(
∂2P∂V 2
)Tc
at Vc ?
(∂2P
∂V 2
)Tc
=2RTc
(Vc − b)3−
6a
V 4c
= 0
Substitute Tc from solution to first equation into second equation and solve for Vc
Vc = 3b
Now solve for Tc by substituting Vc into the solution to the first equation:
Tc =8a
27Rb
So we have obtained Vc ,Tc in terms of the parameters a, b of the gas. Can find Pc fromequation of state
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 175 / 196
![Page 513: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/513.jpg)
Finding critical points of real gases (cont’d)
For vdW gas, what is(
∂P∂V
)Tc
at Vc ?
So (∂P
∂V
)Tc
=−RTc
(Vc − b)2+
2a
V 3c
= 0
Tc =1
R
2a(Vc − b)2
V 3c
What is(
∂2P∂V 2
)Tc
at Vc ?
(∂2P
∂V 2
)Tc
=2RTc
(Vc − b)3−
6a
V 4c
= 0
Substitute Tc from solution to first equation into second equation and solve for Vc
Vc = 3b
Now solve for Tc by substituting Vc into the solution to the first equation:
Tc =8a
27Rb
So we have obtained Vc ,Tc in terms of the parameters a, b of the gas. Can find Pc fromequation of state
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 175 / 196
![Page 514: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/514.jpg)
Finding critical points of real gases (cont’d)
Problem type 2: How to find a, b given Pc , Vc ,Tc of a real gas from experimentalmeasurements?
This is a homework problem
Problem type 3: First solve problem type 2 to get a, b based on experimental data; thencompute ∆U,W ,Q,∆S, etc.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 176 / 196
![Page 515: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/515.jpg)
Finding critical points of real gases (cont’d)
Problem type 2: How to find a, b given Pc , Vc ,Tc of a real gas from experimentalmeasurements?
This is a homework problem
Problem type 3: First solve problem type 2 to get a, b based on experimental data; thencompute ∆U,W ,Q,∆S, etc.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 176 / 196
![Page 516: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/516.jpg)
Finding critical points of real gases (cont’d)
Problem type 2: How to find a, b given Pc , Vc ,Tc of a real gas from experimentalmeasurements?
This is a homework problem
Problem type 3: First solve problem type 2 to get a, b based on experimental data; thencompute ∆U,W ,Q,∆S, etc.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 176 / 196
![Page 517: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/517.jpg)
vdW isotherms
Figure :
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 177 / 196
![Page 518: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/518.jpg)
Generalized equations of state
Inserting these expressions for a, b in terms of Vc ,Tc into the vdW equation we can rewritethe eqn in terms of Vc ,Tc , or using the shorthand notation for relative state variables
Tr ≡ TTc, Pr ≡ P
Pc, Vr = V
Vc, as
Pr =8Tr
3Vr − 1−
3
V 2r
The latter equation is called a generalized equation of state.
Gases are said to be in corresponding states if their Pr , Vr ,Tr ’s are equal
See isotherms
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 178 / 196
![Page 519: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/519.jpg)
Generalized equations of state
Inserting these expressions for a, b in terms of Vc ,Tc into the vdW equation we can rewritethe eqn in terms of Vc ,Tc , or using the shorthand notation for relative state variables
Tr ≡ TTc, Pr ≡ P
Pc, Vr = V
Vc, as
Pr =8Tr
3Vr − 1−
3
V 2r
The latter equation is called a generalized equation of state.
Gases are said to be in corresponding states if their Pr , Vr ,Tr ’s are equal
See isotherms
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 178 / 196
![Page 520: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/520.jpg)
Generalized equations of state
Inserting these expressions for a, b in terms of Vc ,Tc into the vdW equation we can rewritethe eqn in terms of Vc ,Tc , or using the shorthand notation for relative state variables
Tr ≡ TTc, Pr ≡ P
Pc, Vr = V
Vc, as
Pr =8Tr
3Vr − 1−
3
V 2r
The latter equation is called a generalized equation of state.
Gases are said to be in corresponding states if their Pr , Vr ,Tr ’s are equal
See isotherms
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 178 / 196
![Page 521: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/521.jpg)
Generalized equations of state
Inserting these expressions for a, b in terms of Vc ,Tc into the vdW equation we can rewritethe eqn in terms of Vc ,Tc , or using the shorthand notation for relative state variables
Tr ≡ TTc, Pr ≡ P
Pc, Vr = V
Vc, as
Pr =8Tr
3Vr − 1−
3
V 2r
The latter equation is called a generalized equation of state.
Gases are said to be in corresponding states if their Pr , Vr ,Tr ’s are equal
See isotherms
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 178 / 196
![Page 522: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/522.jpg)
Generalized equations of state
Inserting these expressions for a, b in terms of Vc ,Tc into the vdW equation we can rewritethe eqn in terms of Vc ,Tc , or using the shorthand notation for relative state variables
Tr ≡ TTc, Pr ≡ P
Pc, Vr = V
Vc, as
Pr =8Tr
3Vr − 1−
3
V 2r
The latter equation is called a generalized equation of state.
Gases are said to be in corresponding states if their Pr , Vr ,Tr ’s are equal
See isotherms
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 178 / 196
![Page 523: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/523.jpg)
Corresponding states
Figure :
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 179 / 196
![Page 524: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/524.jpg)
Critical points of real gases (cont’d)
Problem type 4: You are given Vc ,Tc of two gases. V ,T of gas 1 is also given. The twogases are in corresponding states. What are P, V ,T of gas 2?
Corresponding states:
T1
Tc,1=
T2
Tc,2
V1
Vc,1=
V2
Vc,2
Solve for V2,T2 from these equations and then P2 from equation of state
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 180 / 196
![Page 525: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/525.jpg)
Critical points of real gases (cont’d)
Problem type 4: You are given Vc ,Tc of two gases. V ,T of gas 1 is also given. The twogases are in corresponding states. What are P, V ,T of gas 2?
Corresponding states:
T1
Tc,1=
T2
Tc,2
V1
Vc,1=
V2
Vc,2
Solve for V2,T2 from these equations and then P2 from equation of state
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 180 / 196
![Page 526: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/526.jpg)
Critical points of real gases (cont’d)
Problem type 4: You are given Vc ,Tc of two gases. V ,T of gas 1 is also given. The twogases are in corresponding states. What are P, V ,T of gas 2?
Corresponding states:
T1
Tc,1=
T2
Tc,2
V1
Vc,1=
V2
Vc,2
Solve for V2,T2 from these equations and then P2 from equation of state
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 180 / 196
![Page 527: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/527.jpg)
Critical points of real gases (cont’d)
Problem type 1: How to find the critical point Pc , Vc ,Tc of a real gas?
Problem type 2: How to find a, b given Pc , Vc ,Tc of a real gas from experimentalmeasurements?
Problem type 3: First solve problem type 2 to get a, b based on experimental data; thencompute ∆U,W ,Q,∆S, etc.
Problem type 4: You are given Vc ,Tc of two gases. The two gases are in correspondingstates. V ,T of gas 1 are given. What are P, V ,T of gas 2?
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 181 / 196
![Page 528: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/528.jpg)
Critical points of real gases (cont’d)
Problem type 1: How to find the critical point Pc , Vc ,Tc of a real gas?
Problem type 2: How to find a, b given Pc , Vc ,Tc of a real gas from experimentalmeasurements?
Problem type 3: First solve problem type 2 to get a, b based on experimental data; thencompute ∆U,W ,Q,∆S, etc.
Problem type 4: You are given Vc ,Tc of two gases. The two gases are in correspondingstates. V ,T of gas 1 are given. What are P, V ,T of gas 2?
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 181 / 196
![Page 529: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/529.jpg)
Critical points of real gases (cont’d)
Problem type 1: How to find the critical point Pc , Vc ,Tc of a real gas?
Problem type 2: How to find a, b given Pc , Vc ,Tc of a real gas from experimentalmeasurements?
Problem type 3: First solve problem type 2 to get a, b based on experimental data; thencompute ∆U,W ,Q,∆S, etc.
Problem type 4: You are given Vc ,Tc of two gases. The two gases are in correspondingstates. V ,T of gas 1 are given. What are P, V ,T of gas 2?
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 181 / 196
![Page 530: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/530.jpg)
Critical points of real gases (cont’d)
Problem type 1: How to find the critical point Pc , Vc ,Tc of a real gas?
Problem type 2: How to find a, b given Pc , Vc ,Tc of a real gas from experimentalmeasurements?
Problem type 3: First solve problem type 2 to get a, b based on experimental data; thencompute ∆U,W ,Q,∆S, etc.
Problem type 4: You are given Vc ,Tc of two gases. The two gases are in correspondingstates. V ,T of gas 1 are given. What are P, V ,T of gas 2?
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 181 / 196
![Page 531: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/531.jpg)
Outline
1 What is Thermodynamics?
2 Some Thermodynamics Terminology
3 Basic concepts of thermodynamics
4 Thermodynamic equations of state
5 Conservation of Mass
6 Integral formulation of mass balance
7 Multicomponent mass balance
8 Conservation of energyEnergy balance
9 Towards the 2nd Law of Thermodynamics
10 Toward engineering applications: thermodynamic cycles and heat engines
11 Thermodynamic properties of real substances (not ideal gases)Computation of heat and work for thermodynamic processes involving nonideal substancesComputation of entropy changes for thermodynamic processes involving nonideal substances
12 Outline of remaining topics and schedule
13 Further analysis of the behavior of real gases
14 Phase equilibrium
15 More on Gibbs free energy and applications to phase equilibrium
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 182 / 196
![Page 532: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/532.jpg)
What happens below Tc ?
Recall region where(
∂P∂V
)T> 0 is physically impossible. This is because the condition for
stability is(
∂P∂V
)T≤ 0
Thus this region must be eliminated
The remaining two solutions for V correspond to liquid and gas (vapor), respectively. Theirmolar volumes are denoted Vl and Vg
The vapor and liquid phases can coexist in equilibrium at the same T ,P - hence draw ahorizontal line connecting the points
Only one line can be drawn if we want only one curve
How do we choose the right P? This is called the vapor pressure Pvap of the substance atthis temperature
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 183 / 196
![Page 533: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/533.jpg)
What happens below Tc ?
Recall region where(
∂P∂V
)T> 0 is physically impossible. This is because the condition for
stability is(
∂P∂V
)T≤ 0
Thus this region must be eliminated
The remaining two solutions for V correspond to liquid and gas (vapor), respectively. Theirmolar volumes are denoted Vl and Vg
The vapor and liquid phases can coexist in equilibrium at the same T ,P - hence draw ahorizontal line connecting the points
Only one line can be drawn if we want only one curve
How do we choose the right P? This is called the vapor pressure Pvap of the substance atthis temperature
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 183 / 196
![Page 534: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/534.jpg)
What happens below Tc ?
Recall region where(
∂P∂V
)T> 0 is physically impossible. This is because the condition for
stability is(
∂P∂V
)T≤ 0
Thus this region must be eliminated
The remaining two solutions for V correspond to liquid and gas (vapor), respectively. Theirmolar volumes are denoted Vl and Vg
The vapor and liquid phases can coexist in equilibrium at the same T ,P - hence draw ahorizontal line connecting the points
Only one line can be drawn if we want only one curve
How do we choose the right P? This is called the vapor pressure Pvap of the substance atthis temperature
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 183 / 196
![Page 535: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/535.jpg)
What happens below Tc ?
Recall region where(
∂P∂V
)T> 0 is physically impossible. This is because the condition for
stability is(
∂P∂V
)T≤ 0
Thus this region must be eliminated
The remaining two solutions for V correspond to liquid and gas (vapor), respectively. Theirmolar volumes are denoted Vl and Vg
The vapor and liquid phases can coexist in equilibrium at the same T ,P - hence draw ahorizontal line connecting the points
Only one line can be drawn if we want only one curve
How do we choose the right P? This is called the vapor pressure Pvap of the substance atthis temperature
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 183 / 196
![Page 536: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/536.jpg)
What happens below Tc ?
Recall region where(
∂P∂V
)T> 0 is physically impossible. This is because the condition for
stability is(
∂P∂V
)T≤ 0
Thus this region must be eliminated
The remaining two solutions for V correspond to liquid and gas (vapor), respectively. Theirmolar volumes are denoted Vl and Vg
The vapor and liquid phases can coexist in equilibrium at the same T ,P - hence draw ahorizontal line connecting the points
Only one line can be drawn if we want only one curve
How do we choose the right P? This is called the vapor pressure Pvap of the substance atthis temperature
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 183 / 196
![Page 537: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/537.jpg)
What happens below Tc ?
Recall region where(
∂P∂V
)T> 0 is physically impossible. This is because the condition for
stability is(
∂P∂V
)T≤ 0
Thus this region must be eliminated
The remaining two solutions for V correspond to liquid and gas (vapor), respectively. Theirmolar volumes are denoted Vl and Vg
The vapor and liquid phases can coexist in equilibrium at the same T ,P - hence draw ahorizontal line connecting the points
Only one line can be drawn if we want only one curve
How do we choose the right P? This is called the vapor pressure Pvap of the substance atthis temperature
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 183 / 196
![Page 538: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/538.jpg)
Phase coexistence line
Figure :
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 184 / 196
![Page 539: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/539.jpg)
Phase equilibrium
Figure :
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 185 / 196
![Page 540: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/540.jpg)
Phase equilibrium problems
Phase coexistence means equilibrium with respect to mass transfer between liquid, gassubsystems at a given P,T
Above Pvap , only liquid; below Pvap , only gas - two phases cannot exist at equilibrium
To place the line, we need some quantitative way of understanding the conditions for phaseequilibrium
We haven’t previously discussed equilibrium with respect to flow of mass
Material for midterm ends here
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 186 / 196
![Page 541: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/541.jpg)
Phase equilibrium problems
Phase coexistence means equilibrium with respect to mass transfer between liquid, gassubsystems at a given P,T
Above Pvap , only liquid; below Pvap , only gas - two phases cannot exist at equilibrium
To place the line, we need some quantitative way of understanding the conditions for phaseequilibrium
We haven’t previously discussed equilibrium with respect to flow of mass
Material for midterm ends here
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 186 / 196
![Page 542: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/542.jpg)
Phase equilibrium problems
Phase coexistence means equilibrium with respect to mass transfer between liquid, gassubsystems at a given P,T
Above Pvap , only liquid; below Pvap , only gas - two phases cannot exist at equilibrium
To place the line, we need some quantitative way of understanding the conditions for phaseequilibrium
We haven’t previously discussed equilibrium with respect to flow of mass
Material for midterm ends here
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 186 / 196
![Page 543: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/543.jpg)
Phase equilibrium problems
Phase coexistence means equilibrium with respect to mass transfer between liquid, gassubsystems at a given P,T
Above Pvap , only liquid; below Pvap , only gas - two phases cannot exist at equilibrium
To place the line, we need some quantitative way of understanding the conditions for phaseequilibrium
We haven’t previously discussed equilibrium with respect to flow of mass
Material for midterm ends here
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 186 / 196
![Page 544: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/544.jpg)
Phase equilibrium problems
Phase coexistence means equilibrium with respect to mass transfer between liquid, gassubsystems at a given P,T
Above Pvap , only liquid; below Pvap , only gas - two phases cannot exist at equilibrium
To place the line, we need some quantitative way of understanding the conditions for phaseequilibrium
We haven’t previously discussed equilibrium with respect to flow of mass
Material for midterm ends here
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 186 / 196
![Page 545: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/545.jpg)
Phase equilibrium problems
See picture of liquid and gas phases coexisting in a container at specified P,T
Note that their molar volumes can differ (Vl 6= Vg )
How do we study phase equilibrium? What is the associated intensive variable that signifiesphase equilibrium between the two subsystems, just as P,T being equal signified mechanicaland thermal equilibrium?
This intensive variable would determine whether ∆N flows spontaneously between phases.Compare conditions Pa = Pb for mechanical equilibrium (no spontaneous ∆V ), and Ta = Tb
for thermal equilibrium (no spontaneous ∆S)
??a =??b at phase equilibrium so there is no spontaneous flow of mass ∆N.
Need a term like PdV ,TdS , but with dN as the change in the extensive variable:
?? dN
So Pvap is the pressure at which the intensive variable ??, which is a property of the systemthat depends on T ,P, are the same for both phases.
G(T ,P) is the appropriate intensive variable:
Ga(T ,P) = Gb(T ,P)
sets Pvap . These are either tabulated or can be computed from equations of state. IfGa > Gb, material flows from a to b.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 187 / 196
![Page 546: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/546.jpg)
Phase equilibrium problems
See picture of liquid and gas phases coexisting in a container at specified P,T
Note that their molar volumes can differ (Vl 6= Vg )
How do we study phase equilibrium? What is the associated intensive variable that signifiesphase equilibrium between the two subsystems, just as P,T being equal signified mechanicaland thermal equilibrium?
This intensive variable would determine whether ∆N flows spontaneously between phases.Compare conditions Pa = Pb for mechanical equilibrium (no spontaneous ∆V ), and Ta = Tb
for thermal equilibrium (no spontaneous ∆S)
??a =??b at phase equilibrium so there is no spontaneous flow of mass ∆N.
Need a term like PdV ,TdS , but with dN as the change in the extensive variable:
?? dN
So Pvap is the pressure at which the intensive variable ??, which is a property of the systemthat depends on T ,P, are the same for both phases.
G(T ,P) is the appropriate intensive variable:
Ga(T ,P) = Gb(T ,P)
sets Pvap . These are either tabulated or can be computed from equations of state. IfGa > Gb, material flows from a to b.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 187 / 196
![Page 547: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/547.jpg)
Phase equilibrium problems
See picture of liquid and gas phases coexisting in a container at specified P,T
Note that their molar volumes can differ (Vl 6= Vg )
How do we study phase equilibrium? What is the associated intensive variable that signifiesphase equilibrium between the two subsystems, just as P,T being equal signified mechanicaland thermal equilibrium?
This intensive variable would determine whether ∆N flows spontaneously between phases.Compare conditions Pa = Pb for mechanical equilibrium (no spontaneous ∆V ), and Ta = Tb
for thermal equilibrium (no spontaneous ∆S)
??a =??b at phase equilibrium so there is no spontaneous flow of mass ∆N.
Need a term like PdV ,TdS , but with dN as the change in the extensive variable:
?? dN
So Pvap is the pressure at which the intensive variable ??, which is a property of the systemthat depends on T ,P, are the same for both phases.
G(T ,P) is the appropriate intensive variable:
Ga(T ,P) = Gb(T ,P)
sets Pvap . These are either tabulated or can be computed from equations of state. IfGa > Gb, material flows from a to b.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 187 / 196
![Page 548: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/548.jpg)
Phase equilibrium problems
See picture of liquid and gas phases coexisting in a container at specified P,T
Note that their molar volumes can differ (Vl 6= Vg )
How do we study phase equilibrium? What is the associated intensive variable that signifiesphase equilibrium between the two subsystems, just as P,T being equal signified mechanicaland thermal equilibrium?
This intensive variable would determine whether ∆N flows spontaneously between phases.Compare conditions Pa = Pb for mechanical equilibrium (no spontaneous ∆V ), and Ta = Tb
for thermal equilibrium (no spontaneous ∆S)
??a =??b at phase equilibrium so there is no spontaneous flow of mass ∆N.
Need a term like PdV ,TdS , but with dN as the change in the extensive variable:
?? dN
So Pvap is the pressure at which the intensive variable ??, which is a property of the systemthat depends on T ,P, are the same for both phases.
G(T ,P) is the appropriate intensive variable:
Ga(T ,P) = Gb(T ,P)
sets Pvap . These are either tabulated or can be computed from equations of state. IfGa > Gb, material flows from a to b.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 187 / 196
![Page 549: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/549.jpg)
Phase equilibrium problems
See picture of liquid and gas phases coexisting in a container at specified P,T
Note that their molar volumes can differ (Vl 6= Vg )
How do we study phase equilibrium? What is the associated intensive variable that signifiesphase equilibrium between the two subsystems, just as P,T being equal signified mechanicaland thermal equilibrium?
This intensive variable would determine whether ∆N flows spontaneously between phases.Compare conditions Pa = Pb for mechanical equilibrium (no spontaneous ∆V ), and Ta = Tb
for thermal equilibrium (no spontaneous ∆S)
??a =??b at phase equilibrium so there is no spontaneous flow of mass ∆N.
Need a term like PdV ,TdS , but with dN as the change in the extensive variable:
?? dN
So Pvap is the pressure at which the intensive variable ??, which is a property of the systemthat depends on T ,P, are the same for both phases.
G(T ,P) is the appropriate intensive variable:
Ga(T ,P) = Gb(T ,P)
sets Pvap . These are either tabulated or can be computed from equations of state. IfGa > Gb, material flows from a to b.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 187 / 196
![Page 550: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/550.jpg)
Phase equilibrium problems
See picture of liquid and gas phases coexisting in a container at specified P,T
Note that their molar volumes can differ (Vl 6= Vg )
How do we study phase equilibrium? What is the associated intensive variable that signifiesphase equilibrium between the two subsystems, just as P,T being equal signified mechanicaland thermal equilibrium?
This intensive variable would determine whether ∆N flows spontaneously between phases.Compare conditions Pa = Pb for mechanical equilibrium (no spontaneous ∆V ), and Ta = Tb
for thermal equilibrium (no spontaneous ∆S)
??a =??b at phase equilibrium so there is no spontaneous flow of mass ∆N.
Need a term like PdV ,TdS , but with dN as the change in the extensive variable:
?? dN
So Pvap is the pressure at which the intensive variable ??, which is a property of the systemthat depends on T ,P, are the same for both phases.
G(T ,P) is the appropriate intensive variable:
Ga(T ,P) = Gb(T ,P)
sets Pvap . These are either tabulated or can be computed from equations of state. IfGa > Gb, material flows from a to b.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 187 / 196
![Page 551: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/551.jpg)
Phase equilibrium problems
See picture of liquid and gas phases coexisting in a container at specified P,T
Note that their molar volumes can differ (Vl 6= Vg )
How do we study phase equilibrium? What is the associated intensive variable that signifiesphase equilibrium between the two subsystems, just as P,T being equal signified mechanicaland thermal equilibrium?
This intensive variable would determine whether ∆N flows spontaneously between phases.Compare conditions Pa = Pb for mechanical equilibrium (no spontaneous ∆V ), and Ta = Tb
for thermal equilibrium (no spontaneous ∆S)
??a =??b at phase equilibrium so there is no spontaneous flow of mass ∆N.
Need a term like PdV ,TdS , but with dN as the change in the extensive variable:
?? dN
So Pvap is the pressure at which the intensive variable ??, which is a property of the systemthat depends on T ,P, are the same for both phases.
G(T ,P) is the appropriate intensive variable:
Ga(T ,P) = Gb(T ,P)
sets Pvap . These are either tabulated or can be computed from equations of state. IfGa > Gb, material flows from a to b.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 187 / 196
![Page 552: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/552.jpg)
Phase equilibrium problems
See picture of liquid and gas phases coexisting in a container at specified P,T
Note that their molar volumes can differ (Vl 6= Vg )
How do we study phase equilibrium? What is the associated intensive variable that signifiesphase equilibrium between the two subsystems, just as P,T being equal signified mechanicaland thermal equilibrium?
This intensive variable would determine whether ∆N flows spontaneously between phases.Compare conditions Pa = Pb for mechanical equilibrium (no spontaneous ∆V ), and Ta = Tb
for thermal equilibrium (no spontaneous ∆S)
??a =??b at phase equilibrium so there is no spontaneous flow of mass ∆N.
Need a term like PdV ,TdS , but with dN as the change in the extensive variable:
?? dN
So Pvap is the pressure at which the intensive variable ??, which is a property of the systemthat depends on T ,P, are the same for both phases.
G(T ,P) is the appropriate intensive variable:
Ga(T ,P) = Gb(T ,P)
sets Pvap . These are either tabulated or can be computed from equations of state. IfGa > Gb, material flows from a to b.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 187 / 196
![Page 553: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/553.jpg)
Phase equilibrium problems
See picture of liquid and gas phases coexisting in a container at specified P,T
Note that their molar volumes can differ (Vl 6= Vg )
How do we study phase equilibrium? What is the associated intensive variable that signifiesphase equilibrium between the two subsystems, just as P,T being equal signified mechanicaland thermal equilibrium?
This intensive variable would determine whether ∆N flows spontaneously between phases.Compare conditions Pa = Pb for mechanical equilibrium (no spontaneous ∆V ), and Ta = Tb
for thermal equilibrium (no spontaneous ∆S)
??a =??b at phase equilibrium so there is no spontaneous flow of mass ∆N.
Need a term like PdV ,TdS , but with dN as the change in the extensive variable:
?? dN
So Pvap is the pressure at which the intensive variable ??, which is a property of the systemthat depends on T ,P, are the same for both phases.
G(T ,P) is the appropriate intensive variable:
Ga(T ,P) = Gb(T ,P)
sets Pvap . These are either tabulated or can be computed from equations of state. IfGa > Gb, material flows from a to b.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 187 / 196
![Page 554: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/554.jpg)
Gibbs free energy and phase equilibrium
Why the Gibbs free energy? Recall that for processes without mass flow
dG = dU + d(PV )− d(TS)
dG = dU + PdV + VdP − TdS − SdT
= VdP − SdT
Since its changes depend only on changes in intensive variables T ,P,for any thermodynamicprocess that is thermally and mechanically reversible, there is no contribution to the changein Gibbs free energy due to thermal or mechanical processes.
For processes with mass flow,
G = NG
dG = dU + PdV − TdS︸ ︷︷ ︸NdG
+ GdN
= GdN
for constant T ,P (as in the case of phase equilibrium)
Thus dG isolates contributions due to mass transfer equilibration processes. The term GdNcaptures entropy changes associated with mass transfer equilibration, as shown in the nextslide
Just like T ,P, G is an intensive variable associated with a certain type of equilibrium - hereit is phase equilibrium. N is the extensive variable.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 188 / 196
![Page 555: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/555.jpg)
Gibbs free energy and phase equilibrium
Why the Gibbs free energy? Recall that for processes without mass flow
dG = dU + d(PV )− d(TS)
dG = dU + PdV + VdP − TdS − SdT
= VdP − SdT
Since its changes depend only on changes in intensive variables T ,P,for any thermodynamicprocess that is thermally and mechanically reversible, there is no contribution to the changein Gibbs free energy due to thermal or mechanical processes.
For processes with mass flow,
G = NG
dG = dU + PdV − TdS︸ ︷︷ ︸NdG
+ GdN
= GdN
for constant T ,P (as in the case of phase equilibrium)
Thus dG isolates contributions due to mass transfer equilibration processes. The term GdNcaptures entropy changes associated with mass transfer equilibration, as shown in the nextslide
Just like T ,P, G is an intensive variable associated with a certain type of equilibrium - hereit is phase equilibrium. N is the extensive variable.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 188 / 196
![Page 556: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/556.jpg)
Gibbs free energy and phase equilibrium
Why the Gibbs free energy? Recall that for processes without mass flow
dG = dU + d(PV )− d(TS)
dG = dU + PdV + VdP − TdS − SdT
= VdP − SdT
Since its changes depend only on changes in intensive variables T ,P,for any thermodynamicprocess that is thermally and mechanically reversible, there is no contribution to the changein Gibbs free energy due to thermal or mechanical processes.
For processes with mass flow,
G = NG
dG = dU + PdV − TdS︸ ︷︷ ︸NdG
+ GdN
= GdN
for constant T ,P (as in the case of phase equilibrium)
Thus dG isolates contributions due to mass transfer equilibration processes. The term GdNcaptures entropy changes associated with mass transfer equilibration, as shown in the nextslide
Just like T ,P, G is an intensive variable associated with a certain type of equilibrium - hereit is phase equilibrium. N is the extensive variable.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 188 / 196
![Page 557: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/557.jpg)
Gibbs free energy and phase equilibrium
Why the Gibbs free energy? Recall that for processes without mass flow
dG = dU + d(PV )− d(TS)
dG = dU + PdV + VdP − TdS − SdT
= VdP − SdT
Since its changes depend only on changes in intensive variables T ,P,for any thermodynamicprocess that is thermally and mechanically reversible, there is no contribution to the changein Gibbs free energy due to thermal or mechanical processes.
For processes with mass flow,
G = NG
dG = dU + PdV − TdS︸ ︷︷ ︸NdG
+ GdN
= GdN
for constant T ,P (as in the case of phase equilibrium)
Thus dG isolates contributions due to mass transfer equilibration processes. The term GdNcaptures entropy changes associated with mass transfer equilibration, as shown in the nextslide
Just like T ,P, G is an intensive variable associated with a certain type of equilibrium - hereit is phase equilibrium. N is the extensive variable.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 188 / 196
![Page 558: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/558.jpg)
Gibbs free energy and phase equilibrium
Why the Gibbs free energy? Recall that for processes without mass flow
dG = dU + d(PV )− d(TS)
dG = dU + PdV + VdP − TdS − SdT
= VdP − SdT
Since its changes depend only on changes in intensive variables T ,P,for any thermodynamicprocess that is thermally and mechanically reversible, there is no contribution to the changein Gibbs free energy due to thermal or mechanical processes.
For processes with mass flow,
G = NG
dG = dU + PdV − TdS︸ ︷︷ ︸NdG
+ GdN
= GdN
for constant T ,P (as in the case of phase equilibrium)
Thus dG isolates contributions due to mass transfer equilibration processes. The term GdNcaptures entropy changes associated with mass transfer equilibration, as shown in the nextslide
Just like T ,P, G is an intensive variable associated with a certain type of equilibrium - hereit is phase equilibrium. N is the extensive variable.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 188 / 196
![Page 559: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/559.jpg)
Gibbs free energy and entropy change due to mass flow
∆Stot for thermodynamic processes involving mass flow (phase equilibration) can becomputed in terms of ∆G ’s.
Any irreversible process (here corresponding to finite difference in G ′s between phases) isassociated with an increase in total entropy. For processes involving mass transfer, thisincrease in entropy is not due to heat.For processes involving mass transfer at constant (T ,P), we have
dG = dU + PdV − TdS︸ ︷︷ ︸NdG
+ GdN
where G is the molar Gibbs free energy under specified conditions (T ,P).The GdN accounts for the excess entropy due to mass transfer. How?
dG
T=
dU
T+
P
TdV − dS +
G
TdN
− GT
dN can be used to compute the excess entropy change due to mass transferAt constant T ,P, where there is no contribution to dStot due to heat,
dStot = −1
TdGtot
= −1
T
(Ga − Gb
)dNa
Note that the above expression can be used to show that mass flows from a to b whenGa > Gb, and that no mass flows when Ga = Gb, thus deriving these results
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 189 / 196
![Page 560: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/560.jpg)
Gibbs free energy and entropy change due to mass flow
∆Stot for thermodynamic processes involving mass flow (phase equilibration) can becomputed in terms of ∆G ’s.Any irreversible process (here corresponding to finite difference in G ′s between phases) isassociated with an increase in total entropy. For processes involving mass transfer, thisincrease in entropy is not due to heat.
For processes involving mass transfer at constant (T ,P), we have
dG = dU + PdV − TdS︸ ︷︷ ︸NdG
+ GdN
where G is the molar Gibbs free energy under specified conditions (T ,P).The GdN accounts for the excess entropy due to mass transfer. How?
dG
T=
dU
T+
P
TdV − dS +
G
TdN
− GT
dN can be used to compute the excess entropy change due to mass transferAt constant T ,P, where there is no contribution to dStot due to heat,
dStot = −1
TdGtot
= −1
T
(Ga − Gb
)dNa
Note that the above expression can be used to show that mass flows from a to b whenGa > Gb, and that no mass flows when Ga = Gb, thus deriving these results
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 189 / 196
![Page 561: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/561.jpg)
Gibbs free energy and entropy change due to mass flow
∆Stot for thermodynamic processes involving mass flow (phase equilibration) can becomputed in terms of ∆G ’s.Any irreversible process (here corresponding to finite difference in G ′s between phases) isassociated with an increase in total entropy. For processes involving mass transfer, thisincrease in entropy is not due to heat.For processes involving mass transfer at constant (T ,P), we have
dG = dU + PdV − TdS︸ ︷︷ ︸NdG
+ GdN
where G is the molar Gibbs free energy under specified conditions (T ,P).
The GdN accounts for the excess entropy due to mass transfer. How?
dG
T=
dU
T+
P
TdV − dS +
G
TdN
− GT
dN can be used to compute the excess entropy change due to mass transferAt constant T ,P, where there is no contribution to dStot due to heat,
dStot = −1
TdGtot
= −1
T
(Ga − Gb
)dNa
Note that the above expression can be used to show that mass flows from a to b whenGa > Gb, and that no mass flows when Ga = Gb, thus deriving these results
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 189 / 196
![Page 562: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/562.jpg)
Gibbs free energy and entropy change due to mass flow
∆Stot for thermodynamic processes involving mass flow (phase equilibration) can becomputed in terms of ∆G ’s.Any irreversible process (here corresponding to finite difference in G ′s between phases) isassociated with an increase in total entropy. For processes involving mass transfer, thisincrease in entropy is not due to heat.For processes involving mass transfer at constant (T ,P), we have
dG = dU + PdV − TdS︸ ︷︷ ︸NdG
+ GdN
where G is the molar Gibbs free energy under specified conditions (T ,P).The GdN accounts for the excess entropy due to mass transfer. How?
dG
T=
dU
T+
P
TdV − dS +
G
TdN
− GT
dN can be used to compute the excess entropy change due to mass transferAt constant T ,P, where there is no contribution to dStot due to heat,
dStot = −1
TdGtot
= −1
T
(Ga − Gb
)dNa
Note that the above expression can be used to show that mass flows from a to b whenGa > Gb, and that no mass flows when Ga = Gb, thus deriving these results
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 189 / 196
![Page 563: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/563.jpg)
Gibbs free energy and entropy change due to mass flow
∆Stot for thermodynamic processes involving mass flow (phase equilibration) can becomputed in terms of ∆G ’s.Any irreversible process (here corresponding to finite difference in G ′s between phases) isassociated with an increase in total entropy. For processes involving mass transfer, thisincrease in entropy is not due to heat.For processes involving mass transfer at constant (T ,P), we have
dG = dU + PdV − TdS︸ ︷︷ ︸NdG
+ GdN
where G is the molar Gibbs free energy under specified conditions (T ,P).The GdN accounts for the excess entropy due to mass transfer. How?
dG
T=
dU
T+
P
TdV − dS +
G
TdN
− GT
dN can be used to compute the excess entropy change due to mass transfer
At constant T ,P, where there is no contribution to dStot due to heat,
dStot = −1
TdGtot
= −1
T
(Ga − Gb
)dNa
Note that the above expression can be used to show that mass flows from a to b whenGa > Gb, and that no mass flows when Ga = Gb, thus deriving these results
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 189 / 196
![Page 564: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/564.jpg)
Gibbs free energy and entropy change due to mass flow
∆Stot for thermodynamic processes involving mass flow (phase equilibration) can becomputed in terms of ∆G ’s.Any irreversible process (here corresponding to finite difference in G ′s between phases) isassociated with an increase in total entropy. For processes involving mass transfer, thisincrease in entropy is not due to heat.For processes involving mass transfer at constant (T ,P), we have
dG = dU + PdV − TdS︸ ︷︷ ︸NdG
+ GdN
where G is the molar Gibbs free energy under specified conditions (T ,P).The GdN accounts for the excess entropy due to mass transfer. How?
dG
T=
dU
T+
P
TdV − dS +
G
TdN
− GT
dN can be used to compute the excess entropy change due to mass transferAt constant T ,P, where there is no contribution to dStot due to heat,
dStot = −1
TdGtot
= −1
T
(Ga − Gb
)dNa
Note that the above expression can be used to show that mass flows from a to b whenGa > Gb, and that no mass flows when Ga = Gb, thus deriving these results
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 189 / 196
![Page 565: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/565.jpg)
Gibbs free energy and entropy change due to mass flow
∆Stot for thermodynamic processes involving mass flow (phase equilibration) can becomputed in terms of ∆G ’s.Any irreversible process (here corresponding to finite difference in G ′s between phases) isassociated with an increase in total entropy. For processes involving mass transfer, thisincrease in entropy is not due to heat.For processes involving mass transfer at constant (T ,P), we have
dG = dU + PdV − TdS︸ ︷︷ ︸NdG
+ GdN
where G is the molar Gibbs free energy under specified conditions (T ,P).The GdN accounts for the excess entropy due to mass transfer. How?
dG
T=
dU
T+
P
TdV − dS +
G
TdN
− GT
dN can be used to compute the excess entropy change due to mass transferAt constant T ,P, where there is no contribution to dStot due to heat,
dStot = −1
TdGtot
= −1
T
(Ga − Gb
)dNa
Note that the above expression can be used to show that mass flows from a to b whenGa > Gb, and that no mass flows when Ga = Gb, thus deriving these results
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 189 / 196
![Page 566: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/566.jpg)
Outline
1 What is Thermodynamics?
2 Some Thermodynamics Terminology
3 Basic concepts of thermodynamics
4 Thermodynamic equations of state
5 Conservation of Mass
6 Integral formulation of mass balance
7 Multicomponent mass balance
8 Conservation of energyEnergy balance
9 Towards the 2nd Law of Thermodynamics
10 Toward engineering applications: thermodynamic cycles and heat engines
11 Thermodynamic properties of real substances (not ideal gases)Computation of heat and work for thermodynamic processes involving nonideal substancesComputation of entropy changes for thermodynamic processes involving nonideal substances
12 Outline of remaining topics and schedule
13 Further analysis of the behavior of real gases
14 Phase equilibrium
15 More on Gibbs free energy and applications to phase equilibrium
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 190 / 196
![Page 567: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/567.jpg)
Entropy changes not originating in heat
Let us further consider the entropy changes associated with phase equilibration
In phase equilibration, and many other processes occurring in chemistry, there are sources ofentropy change that do not originate in heat
At constant T ,P, these extra sources of ∆S serve as the driving forces for equilibration,since there are no thermal or mechanical driving forces. We can see this as follows:
∆Stot = ∆Ssys + ∆Ssurr
=Q
T+ ∆Sextra −
Q
T
where we have assumed there is some chemical process occurring in the system
∆Sextra originates due to some chemical process, like phase equilibrium, occurring within thesystem (container). It is usually not given to us directly.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 191 / 196
![Page 568: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/568.jpg)
Entropy changes not originating in heat
Let us further consider the entropy changes associated with phase equilibration
In phase equilibration, and many other processes occurring in chemistry, there are sources ofentropy change that do not originate in heat
At constant T ,P, these extra sources of ∆S serve as the driving forces for equilibration,since there are no thermal or mechanical driving forces. We can see this as follows:
∆Stot = ∆Ssys + ∆Ssurr
=Q
T+ ∆Sextra −
Q
T
where we have assumed there is some chemical process occurring in the system
∆Sextra originates due to some chemical process, like phase equilibrium, occurring within thesystem (container). It is usually not given to us directly.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 191 / 196
![Page 569: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/569.jpg)
Entropy changes not originating in heat
Let us further consider the entropy changes associated with phase equilibration
In phase equilibration, and many other processes occurring in chemistry, there are sources ofentropy change that do not originate in heat
At constant T ,P, these extra sources of ∆S serve as the driving forces for equilibration,since there are no thermal or mechanical driving forces. We can see this as follows:
∆Stot = ∆Ssys + ∆Ssurr
=Q
T+ ∆Sextra −
Q
T
where we have assumed there is some chemical process occurring in the system
∆Sextra originates due to some chemical process, like phase equilibrium, occurring within thesystem (container). It is usually not given to us directly.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 191 / 196
![Page 570: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/570.jpg)
Entropy changes not originating in heat
Let us further consider the entropy changes associated with phase equilibration
In phase equilibration, and many other processes occurring in chemistry, there are sources ofentropy change that do not originate in heat
At constant T ,P, these extra sources of ∆S serve as the driving forces for equilibration,since there are no thermal or mechanical driving forces. We can see this as follows:
∆Stot = ∆Ssys + ∆Ssurr
=Q
T+ ∆Sextra −
Q
T
where we have assumed there is some chemical process occurring in the system
∆Sextra originates due to some chemical process, like phase equilibrium, occurring within thesystem (container). It is usually not given to us directly.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 191 / 196
![Page 571: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/571.jpg)
Entropy changes not originating in heat
Let us further consider the entropy changes associated with phase equilibration
In phase equilibration, and many other processes occurring in chemistry, there are sources ofentropy change that do not originate in heat
At constant T ,P, these extra sources of ∆S serve as the driving forces for equilibration,since there are no thermal or mechanical driving forces. We can see this as follows:
∆Stot = ∆Ssys + ∆Ssurr
=Q
T+ ∆Sextra −
Q
T
where we have assumed there is some chemical process occurring in the system
∆Sextra originates due to some chemical process, like phase equilibrium, occurring within thesystem (container). It is usually not given to us directly.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 191 / 196
![Page 572: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/572.jpg)
Phase equilibrium
Figure :
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 192 / 196
![Page 573: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/573.jpg)
Expressing total entropy changes not originating in heat from systemperspective alone
For processes like phase equilibration, it is tedious to always draw pictures including thesurroundings as well as interacting subsystems (phases) within the container
∆G provides a way of writing ∆Sextra from the perspective of the container (the “system”)alone, without constantly keeping the surroundings in mind
In order to frame things in terms of the system alone, we need to subtract off thecontribution to ∆S due to heat, since as we just said that does not contribute to ∆Stot foran isothermal process.
This will isolate the extra part of ∆S that comes from change of chemical state (e.g. stateof agglomeration for phase equilibration).
At constant T ,P,
∆G = ∆U + P∆V − T ∆S
= ∆H − T ∆S
= ∆H − T ∆Sheat − T ∆Sextra
= −T ∆Sextra
where ∆H − T ∆Sheat = 0 because the heat is exchanged at constant P, so Q = ∆H.∆Sextra is the extra entropy change due to change of chemical state
So we see that −∆GT
for a process at constant T ,P equals ∆Sextra. ∆Stot = ∆Sextra becauseheat transfer at constant T does not contribute to total entropy.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 193 / 196
![Page 574: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/574.jpg)
Expressing total entropy changes not originating in heat from systemperspective alone
For processes like phase equilibration, it is tedious to always draw pictures including thesurroundings as well as interacting subsystems (phases) within the container
∆G provides a way of writing ∆Sextra from the perspective of the container (the “system”)alone, without constantly keeping the surroundings in mind
In order to frame things in terms of the system alone, we need to subtract off thecontribution to ∆S due to heat, since as we just said that does not contribute to ∆Stot foran isothermal process.
This will isolate the extra part of ∆S that comes from change of chemical state (e.g. stateof agglomeration for phase equilibration).
At constant T ,P,
∆G = ∆U + P∆V − T ∆S
= ∆H − T ∆S
= ∆H − T ∆Sheat − T ∆Sextra
= −T ∆Sextra
where ∆H − T ∆Sheat = 0 because the heat is exchanged at constant P, so Q = ∆H.∆Sextra is the extra entropy change due to change of chemical state
So we see that −∆GT
for a process at constant T ,P equals ∆Sextra. ∆Stot = ∆Sextra becauseheat transfer at constant T does not contribute to total entropy.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 193 / 196
![Page 575: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/575.jpg)
Expressing total entropy changes not originating in heat from systemperspective alone
For processes like phase equilibration, it is tedious to always draw pictures including thesurroundings as well as interacting subsystems (phases) within the container
∆G provides a way of writing ∆Sextra from the perspective of the container (the “system”)alone, without constantly keeping the surroundings in mind
In order to frame things in terms of the system alone, we need to subtract off thecontribution to ∆S due to heat, since as we just said that does not contribute to ∆Stot foran isothermal process.
This will isolate the extra part of ∆S that comes from change of chemical state (e.g. stateof agglomeration for phase equilibration).
At constant T ,P,
∆G = ∆U + P∆V − T ∆S
= ∆H − T ∆S
= ∆H − T ∆Sheat − T ∆Sextra
= −T ∆Sextra
where ∆H − T ∆Sheat = 0 because the heat is exchanged at constant P, so Q = ∆H.∆Sextra is the extra entropy change due to change of chemical state
So we see that −∆GT
for a process at constant T ,P equals ∆Sextra. ∆Stot = ∆Sextra becauseheat transfer at constant T does not contribute to total entropy.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 193 / 196
![Page 576: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/576.jpg)
Expressing total entropy changes not originating in heat from systemperspective alone
For processes like phase equilibration, it is tedious to always draw pictures including thesurroundings as well as interacting subsystems (phases) within the container
∆G provides a way of writing ∆Sextra from the perspective of the container (the “system”)alone, without constantly keeping the surroundings in mind
In order to frame things in terms of the system alone, we need to subtract off thecontribution to ∆S due to heat, since as we just said that does not contribute to ∆Stot foran isothermal process.
This will isolate the extra part of ∆S that comes from change of chemical state (e.g. stateof agglomeration for phase equilibration).
At constant T ,P,
∆G = ∆U + P∆V − T ∆S
= ∆H − T ∆S
= ∆H − T ∆Sheat − T ∆Sextra
= −T ∆Sextra
where ∆H − T ∆Sheat = 0 because the heat is exchanged at constant P, so Q = ∆H.∆Sextra is the extra entropy change due to change of chemical state
So we see that −∆GT
for a process at constant T ,P equals ∆Sextra. ∆Stot = ∆Sextra becauseheat transfer at constant T does not contribute to total entropy.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 193 / 196
![Page 577: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/577.jpg)
Expressing total entropy changes not originating in heat from systemperspective alone
For processes like phase equilibration, it is tedious to always draw pictures including thesurroundings as well as interacting subsystems (phases) within the container
∆G provides a way of writing ∆Sextra from the perspective of the container (the “system”)alone, without constantly keeping the surroundings in mind
In order to frame things in terms of the system alone, we need to subtract off thecontribution to ∆S due to heat, since as we just said that does not contribute to ∆Stot foran isothermal process.
This will isolate the extra part of ∆S that comes from change of chemical state (e.g. stateof agglomeration for phase equilibration).
At constant T ,P,
∆G = ∆U + P∆V − T ∆S
= ∆H − T ∆S
= ∆H − T ∆Sheat − T ∆Sextra
= −T ∆Sextra
where ∆H − T ∆Sheat = 0 because the heat is exchanged at constant P, so Q = ∆H.∆Sextra is the extra entropy change due to change of chemical state
So we see that −∆GT
for a process at constant T ,P equals ∆Sextra. ∆Stot = ∆Sextra becauseheat transfer at constant T does not contribute to total entropy.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 193 / 196
![Page 578: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/578.jpg)
Expressing total entropy changes not originating in heat from systemperspective alone
For processes like phase equilibration, it is tedious to always draw pictures including thesurroundings as well as interacting subsystems (phases) within the container
∆G provides a way of writing ∆Sextra from the perspective of the container (the “system”)alone, without constantly keeping the surroundings in mind
In order to frame things in terms of the system alone, we need to subtract off thecontribution to ∆S due to heat, since as we just said that does not contribute to ∆Stot foran isothermal process.
This will isolate the extra part of ∆S that comes from change of chemical state (e.g. stateof agglomeration for phase equilibration).
At constant T ,P,
∆G = ∆U + P∆V − T ∆S
= ∆H − T ∆S
= ∆H − T ∆Sheat − T ∆Sextra
= −T ∆Sextra
where ∆H − T ∆Sheat = 0 because the heat is exchanged at constant P, so Q = ∆H.∆Sextra is the extra entropy change due to change of chemical state
So we see that −∆GT
for a process at constant T ,P equals ∆Sextra. ∆Stot = ∆Sextra becauseheat transfer at constant T does not contribute to total entropy.
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 193 / 196
![Page 579: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/579.jpg)
Application to phase equilibrium
Now consider again the picture for phase equilibration more closely
Motion of ∆Na < 0 moles of the substance from the liquid to the vapor phase requiresenergy input in the form of heat from the surroundings because the energies of molecules inthese phases differ
Since this heat transfer occurs at constant pressure, the first term in the ∆G equation canbe written as
Q = ∆H = ∆Na(Ha − Hb)
where Ha is the molar enthalpy of the liquid and Hb is the molar enthalpy of the vapor
The second term in the ∆G equation can be written
T ∆Ssys,heat = ∆Na(Ha − Hb)
T ∆Na(Sa,heat − Sb,heat ) = ∆Na(Ha − Hb)
∆G associated with passage of ∆Na moles of liquid into the vapor phase subtracts off thecontribution from ∆Ssys,heat since it is isothermal heat and cannot contribute to the drivingforce for the process:
∆G = ∆H − T ∆S
∆Na(Ga − Gb)a = ∆Na(Ha − Hb)− T ∆Na(Sa,heat − Sb,heat )− T ∆Na(Sa,extra − Sb,extra)
= −T ∆Na(Sa,extra − Sb,extra)
So we have successfully isolated the contribution from the extra entropy, which is the drivingforce for equilibration
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 194 / 196
![Page 580: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/580.jpg)
Application to phase equilibrium
Now consider again the picture for phase equilibration more closely
Motion of ∆Na < 0 moles of the substance from the liquid to the vapor phase requiresenergy input in the form of heat from the surroundings because the energies of molecules inthese phases differ
Since this heat transfer occurs at constant pressure, the first term in the ∆G equation canbe written as
Q = ∆H = ∆Na(Ha − Hb)
where Ha is the molar enthalpy of the liquid and Hb is the molar enthalpy of the vapor
The second term in the ∆G equation can be written
T ∆Ssys,heat = ∆Na(Ha − Hb)
T ∆Na(Sa,heat − Sb,heat ) = ∆Na(Ha − Hb)
∆G associated with passage of ∆Na moles of liquid into the vapor phase subtracts off thecontribution from ∆Ssys,heat since it is isothermal heat and cannot contribute to the drivingforce for the process:
∆G = ∆H − T ∆S
∆Na(Ga − Gb)a = ∆Na(Ha − Hb)− T ∆Na(Sa,heat − Sb,heat )− T ∆Na(Sa,extra − Sb,extra)
= −T ∆Na(Sa,extra − Sb,extra)
So we have successfully isolated the contribution from the extra entropy, which is the drivingforce for equilibration
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 194 / 196
![Page 581: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/581.jpg)
Application to phase equilibrium
Now consider again the picture for phase equilibration more closely
Motion of ∆Na < 0 moles of the substance from the liquid to the vapor phase requiresenergy input in the form of heat from the surroundings because the energies of molecules inthese phases differ
Since this heat transfer occurs at constant pressure, the first term in the ∆G equation canbe written as
Q = ∆H = ∆Na(Ha − Hb)
where Ha is the molar enthalpy of the liquid and Hb is the molar enthalpy of the vapor
The second term in the ∆G equation can be written
T ∆Ssys,heat = ∆Na(Ha − Hb)
T ∆Na(Sa,heat − Sb,heat ) = ∆Na(Ha − Hb)
∆G associated with passage of ∆Na moles of liquid into the vapor phase subtracts off thecontribution from ∆Ssys,heat since it is isothermal heat and cannot contribute to the drivingforce for the process:
∆G = ∆H − T ∆S
∆Na(Ga − Gb)a = ∆Na(Ha − Hb)− T ∆Na(Sa,heat − Sb,heat )− T ∆Na(Sa,extra − Sb,extra)
= −T ∆Na(Sa,extra − Sb,extra)
So we have successfully isolated the contribution from the extra entropy, which is the drivingforce for equilibration
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 194 / 196
![Page 582: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/582.jpg)
Application to phase equilibrium
Now consider again the picture for phase equilibration more closely
Motion of ∆Na < 0 moles of the substance from the liquid to the vapor phase requiresenergy input in the form of heat from the surroundings because the energies of molecules inthese phases differ
Since this heat transfer occurs at constant pressure, the first term in the ∆G equation canbe written as
Q = ∆H = ∆Na(Ha − Hb)
where Ha is the molar enthalpy of the liquid and Hb is the molar enthalpy of the vapor
The second term in the ∆G equation can be written
T ∆Ssys,heat = ∆Na(Ha − Hb)
T ∆Na(Sa,heat − Sb,heat ) = ∆Na(Ha − Hb)
∆G associated with passage of ∆Na moles of liquid into the vapor phase subtracts off thecontribution from ∆Ssys,heat since it is isothermal heat and cannot contribute to the drivingforce for the process:
∆G = ∆H − T ∆S
∆Na(Ga − Gb)a = ∆Na(Ha − Hb)− T ∆Na(Sa,heat − Sb,heat )− T ∆Na(Sa,extra − Sb,extra)
= −T ∆Na(Sa,extra − Sb,extra)
So we have successfully isolated the contribution from the extra entropy, which is the drivingforce for equilibration
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 194 / 196
![Page 583: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/583.jpg)
Application to phase equilibrium
Now consider again the picture for phase equilibration more closely
Motion of ∆Na < 0 moles of the substance from the liquid to the vapor phase requiresenergy input in the form of heat from the surroundings because the energies of molecules inthese phases differ
Since this heat transfer occurs at constant pressure, the first term in the ∆G equation canbe written as
Q = ∆H = ∆Na(Ha − Hb)
where Ha is the molar enthalpy of the liquid and Hb is the molar enthalpy of the vapor
The second term in the ∆G equation can be written
T ∆Ssys,heat = ∆Na(Ha − Hb)
T ∆Na(Sa,heat − Sb,heat ) = ∆Na(Ha − Hb)
∆G associated with passage of ∆Na moles of liquid into the vapor phase subtracts off thecontribution from ∆Ssys,heat since it is isothermal heat and cannot contribute to the drivingforce for the process:
∆G = ∆H − T ∆S
∆Na(Ga − Gb)a = ∆Na(Ha − Hb)− T ∆Na(Sa,heat − Sb,heat )− T ∆Na(Sa,extra − Sb,extra)
= −T ∆Na(Sa,extra − Sb,extra)
So we have successfully isolated the contribution from the extra entropy, which is the drivingforce for equilibration
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 194 / 196
![Page 584: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/584.jpg)
Application to phase equilibrium (cont’d)
∆G = ∆H − T ∆S
∆Na(Ga − Gb) = ∆Na(Ha − Hb)− T ∆N(Sa,heat − Sb,heat )− T ∆N(Sa,extra − Sb,extra)
= −T ∆Na(Sa,extra − Sb,extra)
Thus for phase equilibration, −∆GT
= ∆Sextra. This is the driving force for phaseequilibration.
We see that if Ga = Gb, ∆Stot = ∆Sextra = 0 and hence we have phase equilibrium
If Ga > Gb, ∆Stot = ∆Sextra > 0 for flow of mass from a to b (i.e. ∆Na < 0). ∆G < 0 forsuch a process. Thus ∆G < 0 can be used as an equivalent criterion for spontaneity ofchemical processes at constant T ,P.
We often use the notation ∆Gtot for ∆G of the container since there are no contributionsfrom the surroundings.
All the above expressions can be written in terms of dN, and hence dG rather than ∆N and∆G 5
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 195 / 196
![Page 585: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/585.jpg)
Application to phase equilibrium (cont’d)
∆G = ∆H − T ∆S
∆Na(Ga − Gb) = ∆Na(Ha − Hb)− T ∆N(Sa,heat − Sb,heat )− T ∆N(Sa,extra − Sb,extra)
= −T ∆Na(Sa,extra − Sb,extra)
Thus for phase equilibration, −∆GT
= ∆Sextra. This is the driving force for phaseequilibration.
We see that if Ga = Gb, ∆Stot = ∆Sextra = 0 and hence we have phase equilibrium
If Ga > Gb, ∆Stot = ∆Sextra > 0 for flow of mass from a to b (i.e. ∆Na < 0). ∆G < 0 forsuch a process. Thus ∆G < 0 can be used as an equivalent criterion for spontaneity ofchemical processes at constant T ,P.
We often use the notation ∆Gtot for ∆G of the container since there are no contributionsfrom the surroundings.
All the above expressions can be written in terms of dN, and hence dG rather than ∆N and∆G 5
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 195 / 196
![Page 586: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/586.jpg)
Application to phase equilibrium (cont’d)
∆G = ∆H − T ∆S
∆Na(Ga − Gb) = ∆Na(Ha − Hb)− T ∆N(Sa,heat − Sb,heat )− T ∆N(Sa,extra − Sb,extra)
= −T ∆Na(Sa,extra − Sb,extra)
Thus for phase equilibration, −∆GT
= ∆Sextra. This is the driving force for phaseequilibration.
We see that if Ga = Gb, ∆Stot = ∆Sextra = 0 and hence we have phase equilibrium
If Ga > Gb, ∆Stot = ∆Sextra > 0 for flow of mass from a to b (i.e. ∆Na < 0). ∆G < 0 forsuch a process. Thus ∆G < 0 can be used as an equivalent criterion for spontaneity ofchemical processes at constant T ,P.
We often use the notation ∆Gtot for ∆G of the container since there are no contributionsfrom the surroundings.
All the above expressions can be written in terms of dN, and hence dG rather than ∆N and∆G 5
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 195 / 196
![Page 587: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/587.jpg)
Application to phase equilibrium (cont’d)
∆G = ∆H − T ∆S
∆Na(Ga − Gb) = ∆Na(Ha − Hb)− T ∆N(Sa,heat − Sb,heat )− T ∆N(Sa,extra − Sb,extra)
= −T ∆Na(Sa,extra − Sb,extra)
Thus for phase equilibration, −∆GT
= ∆Sextra. This is the driving force for phaseequilibration.
We see that if Ga = Gb, ∆Stot = ∆Sextra = 0 and hence we have phase equilibrium
If Ga > Gb, ∆Stot = ∆Sextra > 0 for flow of mass from a to b (i.e. ∆Na < 0). ∆G < 0 forsuch a process. Thus ∆G < 0 can be used as an equivalent criterion for spontaneity ofchemical processes at constant T ,P.
We often use the notation ∆Gtot for ∆G of the container since there are no contributionsfrom the surroundings.
All the above expressions can be written in terms of dN, and hence dG rather than ∆N and∆G 5
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 195 / 196
![Page 588: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/588.jpg)
Application to phase equilibrium (cont’d)
∆G = ∆H − T ∆S
∆Na(Ga − Gb) = ∆Na(Ha − Hb)− T ∆N(Sa,heat − Sb,heat )− T ∆N(Sa,extra − Sb,extra)
= −T ∆Na(Sa,extra − Sb,extra)
Thus for phase equilibration, −∆GT
= ∆Sextra. This is the driving force for phaseequilibration.
We see that if Ga = Gb, ∆Stot = ∆Sextra = 0 and hence we have phase equilibrium
If Ga > Gb, ∆Stot = ∆Sextra > 0 for flow of mass from a to b (i.e. ∆Na < 0). ∆G < 0 forsuch a process. Thus ∆G < 0 can be used as an equivalent criterion for spontaneity ofchemical processes at constant T ,P.
We often use the notation ∆Gtot for ∆G of the container since there are no contributionsfrom the surroundings.
All the above expressions can be written in terms of dN, and hence dG rather than ∆N and∆G 5
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 195 / 196
![Page 589: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/589.jpg)
Application to phase equilibrium (cont’d)
∆G = ∆H − T ∆S
∆Na(Ga − Gb) = ∆Na(Ha − Hb)− T ∆N(Sa,heat − Sb,heat )− T ∆N(Sa,extra − Sb,extra)
= −T ∆Na(Sa,extra − Sb,extra)
Thus for phase equilibration, −∆GT
= ∆Sextra. This is the driving force for phaseequilibration.
We see that if Ga = Gb, ∆Stot = ∆Sextra = 0 and hence we have phase equilibrium
If Ga > Gb, ∆Stot = ∆Sextra > 0 for flow of mass from a to b (i.e. ∆Na < 0). ∆G < 0 forsuch a process. Thus ∆G < 0 can be used as an equivalent criterion for spontaneity ofchemical processes at constant T ,P.
We often use the notation ∆Gtot for ∆G of the container since there are no contributionsfrom the surroundings.
All the above expressions can be written in terms of dN, and hence dG rather than ∆N and∆G 5
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 195 / 196
![Page 590: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/590.jpg)
W ,Q calculations for nonideal gases: isobaric processes
Recall that W ,Q are path-dependent. Hence they cannot be calculated along any path wechoose.
For isobaric processes, W = −P∆V
Since ∆U = Q + W ,
Q = ∆U −W = ∆U + P∆V
∆U can be calculated along any path (e.g., isothermal followed by isovolumetric); then Qcan be calculated using the above expression
E.g., for an isothermal/isovolumetric path,
∆U = ∆U1 + ∆U2
=
∫ V2
V1
T
(∂P
∂T
)V
− P dV +
∫ T2
T1
NCv dT
Q = ∆U + P∆V
Note that Q = ∆H for the isobaric process - a shortcut!
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 196 / 196
![Page 591: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/591.jpg)
W ,Q calculations for nonideal gases: isobaric processes
Recall that W ,Q are path-dependent. Hence they cannot be calculated along any path wechoose.
For isobaric processes, W = −P∆V
Since ∆U = Q + W ,
Q = ∆U −W = ∆U + P∆V
∆U can be calculated along any path (e.g., isothermal followed by isovolumetric); then Qcan be calculated using the above expression
E.g., for an isothermal/isovolumetric path,
∆U = ∆U1 + ∆U2
=
∫ V2
V1
T
(∂P
∂T
)V
− P dV +
∫ T2
T1
NCv dT
Q = ∆U + P∆V
Note that Q = ∆H for the isobaric process - a shortcut!
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 196 / 196
![Page 592: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/592.jpg)
W ,Q calculations for nonideal gases: isobaric processes
Recall that W ,Q are path-dependent. Hence they cannot be calculated along any path wechoose.
For isobaric processes, W = −P∆V
Since ∆U = Q + W ,
Q = ∆U −W = ∆U + P∆V
∆U can be calculated along any path (e.g., isothermal followed by isovolumetric); then Qcan be calculated using the above expression
E.g., for an isothermal/isovolumetric path,
∆U = ∆U1 + ∆U2
=
∫ V2
V1
T
(∂P
∂T
)V
− P dV +
∫ T2
T1
NCv dT
Q = ∆U + P∆V
Note that Q = ∆H for the isobaric process - a shortcut!
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 196 / 196
![Page 593: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/593.jpg)
W ,Q calculations for nonideal gases: isobaric processes
Recall that W ,Q are path-dependent. Hence they cannot be calculated along any path wechoose.
For isobaric processes, W = −P∆V
Since ∆U = Q + W ,
Q = ∆U −W = ∆U + P∆V
∆U can be calculated along any path (e.g., isothermal followed by isovolumetric); then Qcan be calculated using the above expression
E.g., for an isothermal/isovolumetric path,
∆U = ∆U1 + ∆U2
=
∫ V2
V1
T
(∂P
∂T
)V
− P dV +
∫ T2
T1
NCv dT
Q = ∆U + P∆V
Note that Q = ∆H for the isobaric process - a shortcut!
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 196 / 196
![Page 594: Department - PMC-ATpmc-at.com/pdfs/Thermodynamics072514.pdf · Thermodynamics CHE 06-221 Department of Chemical Engineering, Carnegie Mellon University December 5, 2012 CHE 06-221](https://reader031.vdocuments.us/reader031/viewer/2022021421/5a718d517f8b9aac538cf09a/html5/thumbnails/594.jpg)
W ,Q calculations for nonideal gases: isobaric processes
Recall that W ,Q are path-dependent. Hence they cannot be calculated along any path wechoose.
For isobaric processes, W = −P∆V
Since ∆U = Q + W ,
Q = ∆U −W = ∆U + P∆V
∆U can be calculated along any path (e.g., isothermal followed by isovolumetric); then Qcan be calculated using the above expression
E.g., for an isothermal/isovolumetric path,
∆U = ∆U1 + ∆U2
=
∫ V2
V1
T
(∂P
∂T
)V
− P dV +
∫ T2
T1
NCv dT
Q = ∆U + P∆V
Note that Q = ∆H for the isobaric process - a shortcut!
CHE 06-221 (Department of Chemical Engineering, Carnegie Mellon University)Thermodynamics December 5, 2012 196 / 196