dentalia commerce - ceramotion one touch...

NEW

with

Nacera® Pearl Q

3 !

EN

ceraMotion® One Touch Concept.

*

Photo

: ©

Christ

ian F

erra

ri ®

Nacera® P

2

Be it opaque, highly translucent, ultra-highly translucent or single- or multi-layered – Nacera®, a high-performance ceramics made of zirconium oxide, is available for many indications. The high-quality and extremely precise milling blanks are manufactured in Germany. They can be used to create sophisticated, natural dental restorations.

ceraMotion® Zr veneering ceramics unite the highest demands on aesthetics with the most modern materials technology within a logical system. The resulting products are developed and produced in our own company. The One Touch Concept combines two strong brands – Nacera® and ceraMotion®.

The ceraMotion® One Touch Concept combines two strong brands – Nacera® and ceraMotion®.

* Nacera® is a registered trademark of Doceram Medical Ceramics GmbH, Germany.

Nacera®* and ceraMotion® – two strong brands combined to form a unique product range for all indications and processing techniques for the manufacture of all-ceramic restorations made of zirconium oxide. They are individually tailored to the needs and requirements of the user.

3

✓ White zirconium oxide, semi-translucent and highly translucent.

✓ Highly translucent colored zirconium oxide in the 16 V-classic shades (A1 - D4 + 2 bleach colors).

✓ Multi-layered and highly translucent zirconium oxide in 4 basic colors (A - D) Light & Dark. NEW

✓ Multi-layered and ultra-highly translucent zirconium oxide in 3 basic colors (A - C) Light & Dark. NEW

✓ Veneering porcelain concept for build-up / cut back / staining and minimal stratification technique.

✓ Unique 2D and 3D pastes for a quick, aesthetic finish to fully-anatomical restorations.

✓ Coloring liquids in the classic V-shades (A1-D4) and shade modifiers for the dipping and brush technique.

✓ Nacera® Blue X liquid to increase translucency in highly translucent zirconium oxide.

Zirconium oxide. Color stability. Aesthetics.

4

There is a steady increase in the demand for all-ceramic restorations. Bridges and crowns made from this material not only promise retention for a longer period of time, but they also lend a natural appearance, are chemically stable and are tolerated well. They offer everything that is expected of modern restorations.

There is also an increase in demand for materials which require less time for processing whilst maintaining a high demand on aesthetics.

Our answer: the ceraMotion® One Touch Concept.

ceraMotion® One Touch pastes were especially developed for aesthetic, fully-anatomical restorations. Together with the Nacera® Pearl blanks they form the core products of the ceraMotion® One Touch Concept. Never before has it been easier to manufacture aesthetic crowns and bridges in such a short time.

The ceraMotion® One Touch Concept.

5

Nacera® PearlThe colored Nacera® zirconium oxide blanks (Pearl Q3 Multi-Shade, Pearl Multi-Shade and Pearl Shaded 16+2) are the perfect complement to ceraMotion® One Touch. Nacera® Pearl, completed with stains and glazing material or by using minimal stratification, provides a quality foundation for monolithic restorations with a natural look.

ceraMotion® One Touch pastesceraMotion® One Touch are 2D and 3D pastes that have been specially developed for the finish and characterization of all-ceramic monolithic restorations made of lithium disilicate and zirconium oxide.

✔ Easy ✔ Quick ✔ Aesthetic

*

6

The Nacera® zirconium oxide concept.One solution for all requirements.

36% semi-translucent 3Y-TZP-A*

Multi-layered

Pre-shaded

White

Shell 1

Strength

7

44 % highly translucent 3Y-TZP* 51 % ultra-highly translucent 6Y-PSZ**

Effi

cien

cy

Pearl Multi-Shade

Pearl Shaded 16+2 Pearl Shaded 16+2 + Blue X***

Pearl Q3 Multi-Shade

Pearl 1 + Classic LiquidPe

Translucency

* TZP, tetragonal zirconia polycrystal

** PSZ, partly stabilized zirconia

*** dependent on the amount of Nacera® Blue X applied

Pea

8

Nacera® zirconium oxide – technical data.The following technical data refer to the optimum sintering temperatures recommended by the manufacturer:

Class 5 > 800 MPa according to DIN EN ISO 6872

Class 4 < 500 MPa according to DIN EN ISO 6872

Bending strength4 point bending strength (MPa) DIN EN ISO 6872. The higher the bending strength of the zirconium oxide (ZrO2), the better the stability under masticatory pressure.

Nacera® Shell 3Y-TZP-A 1200 MPa

Nacera® Pearl 3Y-TZP 1200 MPa

Nacera® Pearl + BlueX 3Y-TZP+ min. 1000 MPa

Nacera® Pearl Q3 6Y-PSZ 600 MPa

MPa 0 200 400 600 800 1000 1200

Brid

ges

with

3

elem

ents

Brid

ges

with

3

elem

ents

9

Source: DOCERAM Medical Ceramics GmbH, Germany

TranslucencyThe higher the translucency, the more transparent the material (lower opacity).

Thickness

Samples

mm

Opacity Colored Base material

Nacera® Pearl 1

+ Classic Liquid

A3

1.5 89 % 11 % 21 %

1.0 82 % 18 % 28 %

0.5 69 % 31 % 41 %

Nacera® PearlShaded

A3

1.5 86 % 14 % 24 %

1.0 80 % 20 % 30 %

0.5 66 % 34 % 44 %

Nacera® Pearl Q3 Multi-Shade

A3

1.5 79 % 21 % 31 %

1.0 74 % 26 % 36 %

0.5 59 % 41 % 51 %

Opacity Translucency

10

Quick guide – sintering zirconium oxide

(Shell and Pearl, without Pearl Q3)

Small construction / low mass

Solid construction / high mass

Mass

8 °C / 46 °F per min185 mins


1500 °C / 2732 °F 120 mins 1500 °C / 2732 °F

20 °C / 68 °F 20 °C / 68 °F



1500 °C / 2732 °F 120 mins 1500 °C / 2732 °F

20 °C / 68 °F 20 °C / 68 °F

Thickness Crown

0.50 mm – 2.00 mm

ThicknessBridge

3.00 mm – 5.00 mm

Heating up andcooling down rate / min.

8 °C

Holding time 120 mins

Thickness Crown

2.00 mm – 5.00 mm

ThicknessBridge

5.00 mm – 9.00 mm

Heating up and cooling down rate / min.

4 °C / 39 °F 4 °C / 39 °F

Holding time 120 mins150 – 180 mins

Mass Toronto

11

DIN EN ISO 13356

1550 °C + / 2822 °F 1500 °C / 2732 °F1450 °C / 2642 °F

Strength Translucency

i

Strength vs. translucency

A higher sintering temperature generates grain growth and increases translucency.

Grain growth reduces strength and increases translucency.

Higher grain growth leads to larger grain boundaries. Hydrothermal aging increases in speed and both the strength and the life span of the material descrease.

Zirconium oxide is a poor heat conductor. Transport of energy to and from the material takes time. (Decrease the heating rate for large constructions).

Slow cooling can improve translucency and counteracts tension in the material.

12

Indication guide.

Using the correct zirconium oxide and its indication often depends on many factors. The Nacera® indication guide will help you select the best solution for the case in hand. Results will be long-lasting and aesthetic if the preparation shade, the material properties and the indication are well coordinated.

Status Translucency/transparency Nacera® product

Prepared tooth

Light – bleached UHT Ultra-highly translucent, multi-shaded Pearl Q3 Multi-Shade

Medium – slightly discolored HT Highly translucent, multi-shaded Pearl Multi-Shade

Medium – slightly discolored HT Highly translucent, pre-shaded Pearl Shaded 16 + 2

Medium – slightly discolored HT Highly translucent, white Pearl 1

Dark – strongly discolored/metal ST Semi-translucent, white Shell 1

Status Translucency/transparency Nacera® product

Prepared tooth

Light – bleached UHT Ultra-highly translucent, multi-shaded Pearl Q3 Multi-Shade

Medium – slightly discolored HT Highly translucent, multi-shaded Pearl Multi-Shade

Medium – slightly discolored HT Highly translucent, pre-shaded Pearl Shaded 16 + 2

Medium – slightly discolored HT Highly translucent, white Pearl 1

Dark – strongly discolored/metal ST Semi-translucent, white Shell 1

13

Technique ceraMotion® Universal Stains ceraMotion® OneTouch ceraMotion® Zr

Classic Liquid dip/brush Use Blue X Fully-anatomical/paint Minimal cut-back Veneer

- - ✓ ✓ ✓

✓ for accents ✓ ✓ ✓ ✓

✓ for accents ✓ ✓ ✓ ✓

✓ - ✓ ✓ ✓

- - - - ✓

Restoration

Inlay, Onlay, VeneerCrowns

anterior & posterior toothBridges > 3 elements

anterior & posterior toothAbutment with interface

Crown implant with interface

✓ ✓ - - ✓

✓ ✓ ✓ ✓ ✓

✓ ✓ ✓ ✓ ✓

✓ ✓ ✓ ✓ ✓

- ✓ ✓ ✓ ✓

14

Nacera® Pearl Q3 Multi-Shade

Nacera® Pearl Q3 Multi-Shade redefines the accuracy of color and fit of CAD / CAM restoration materials.

The multi-shaded Nacera® Pearl Multi-Shade system has been extended by the 6 mol % yttrium-stabilized Q3 zirconium oxide series and features not only ultra-high translucency, but also light dynamics and color rendering that exactly match the V-shade system. The special chemical composition with the development of a tetragonal-cubic phase is partially responsible for the photo-optical properties of the new high performance ceramics. The optimized light refraction and the resulting improved light dispersion make every crown an aesthetic success!

The new tetragonal-cubic 6Y-PSZ high-performance ceramics from the multi-shade family has been developed with a special color mix and measuring method that now for the first time takes into account the brightness value and chroma in a zirconium oxide system, enabling a very homogeneous color particle distribution in the material. At the same time the very fine flowing color gradations from the cervical area to the incisal edge of the restoration are true-to-life – whether they are fully anatomical or anatomically reduced.

With a bending strength of 700 + / - 120 MPa Nacera® Pearl Q3 Multi-Shade is suitable for the production not only of monolithic individual restorations but also highly aesthetic three component bridges with long-term stability.

NEW

A-Light

A2

A1

15

Nacera® Pearl Q3

Ultra-highly translucent – multi-layered.

So what is behind it all: Based on the last zirconium oxide generation, Nacera experts have developed Pearl Q3. The 6Y-PSZ zirconium oxide has a cubic phase which significantly reduces double refraction compared to other yttrium-stabilized zirconium oxides on the market. Light transmission and thus translucency are thereby significantly increased.

6Y - PSZ**60 % CUBIC | 40 % TETRAGONAL

3Y - TZP*100 % TETRAGONAL

LIGHT

DOUBLE REFRACTION

LIGHT

SINGLE REFRACTIONDISPERSION

Double refraction is a physical property of optical materials that have two refraction indexes. Light is also refracted in different ways in different polarization levels. In the processed polycrystalline zirconium oxide this causes greater dispersion and therefore opacity. This could be significantly reduced in the 6Y-PSZ Pearl Q3 material.

* TZP, tetragonal zirconia polycrystal

** PSZ, partly stabilized zirconia

16

Nacera® Pearl Q3 Multi-Shade 6Y-PSZ

Nacera® Pearl Q3 Multi-Shade is a polychromatic, ultra-highly translucent zirconium oxide with a fine, progressive color gradient and a perfect match of classic V-shades.

We apply a new color blending method, taking for the first time into account the color-dependent brightness value and chroma in a zirconium oxide system. The shade match and natural appearance allows you to be most effective. Save time while finishing only with glaze (ceraMotion® Zr Paste Glaze) or add more individual character with ceraMotion® One Touch.

Advantages & indications

✓ Revolutionary, perfect V-shades and realistic, soft color gradients.

✓ Produce monolithic crowns, bridges up to 3 elements and veneers, inlays and onlays.

✓ Finish with one firing, e.g. with ceraMotion® One Touch.

✓ Economic system to achieve the most popular shades.

Nacera® Pearl Q3 Multi-Shade multi-layered zirconium oxide

16 mm 20 mm

A-Light 270-060-16 270-060-20

A-Dark 270-070-16 270-070-20

B-Light 270-061-16 270-061-20

B-Dark 270-071-16 270-071-20

C-Light 270-062-16 270-062-20

Nacera® Pearl Q3 Shade / Color allocation

V-shade

A-Light A1 – A2

A-Dark A3 – A3.5

B-Light B1 – B2

B-Dark B3 – B4

C-Light C1 – C2

51 %translucency

17

A2

A3

A3.5

B1

B2

B3

B4

A1

Nacera® Color Guide 6Y-PSZ

A-Dark

With our Nacera® Color Guide, you choose the best solution for your case. Depending on the height of the blank and the color, you can see the exact position of the restoration in the blank. This allows you to produce a perfect color match and an aesthetic solution – a Nacera® solution.

16 mm

A-Light12 mm

8 mm

4 mm

0 mm

16 mm

12 mm

8 mm

4 mm

0 mm

B-Dark

16 mm

B-Light12 mm

8 mm

4 mm

0 mm

16 mm

12 mm

8 mm

4 mm

0 mm

Please use the same scheme for C-Light and C-Dark.

Incisal

Body

Cervix

{{{A1

A2

Incisal

Body

Cervix

{{{

Incisal

Body

Cervix

{{{A3

A3.5

Incisal

Body

Cervix

{{{

Incisal

Body

Cervix

{{{B1

B2

Incisal

Body

Cervix

{{{

Incisal

Body

Cervix

{{{B3

B4

Incisal

Body

Cervix

{{{

}}

}}

}}

}}

Blank thickness

18

We have extended the range of our high-strength 3Y-TZP material, the highly translucent Nacera® Pearl, with two additional multi-layered variations. After sintering, Nacera® Pearl Multi-Shade zirconium oxide shows the fine, flowing gradations of the natural shade transition in the tooth. This gives a natural, authentic character to the construction, be it fully-anatomical or reduced. The Multi-Shade milling blanks are available in the shades A, B, C and D, each Light and Dark, to achieve the most common tooth colors. Their application is quite simple: Depending on the height positioning of the crown, for example, the colors A1 or A2 can be achieved in an A-Light blank from bottom to top. The same is true for the other shades.

You therefore have a multi-layered system which is efficient and cost-effective and which needs only eight different blanks to achieve almost every VITA color.

Nacera® Pearl Multi-Shade 3Y-TZP 44 %translucency


✓ Highly translucent multi-layered system.

✓ Natural and smooth shade transitions from cervical to incisal.

✓ Quick and economical for natural-looking monolithic restorations.

✓ Flexural strength 1200 MPa (4 point)

✓ Excellent machinability without fracturing or chipping – burs last up to 15% longer.

Nacera® Pearl Multi-Shade features natural and smooth shade transitions within the restoration.

19

Nacera® Pearl Multi-Shade, ø 98.3 mm

14 mm 18 mm 22 mm

MS-A 270-050-14 270-050-18 270-050-22

MS-B 270-051-14 270-051-18 270-051-22

MS-C 270-052-14 270-052-18 270-052-22

MS-D 270-053-14 270-053-18 270-053-22

ceraMotion® One Touch pastes and ceraMotion® Zr Paste Glaze can be used to lend multi-shade restorations maximum aesthetics after just one glaze firing.

The cut-back technique can be used also to ensure shade stability in the incisal and posterior region throughout processing.

Highly translucent – multi-layered

Nacera® Pearl Multi-Shade, ø 98.3 mm

14 mm 18 mm 22 mm

A-Light 270-084-14 270-084-18 270-084-22

A-Dark 270-054-14 270-054-18 270-054-22

B-Light 270-085-14 270-085-18 270-085-22

B-Dark 270-055-14 270-055-18 270-055-22

C-Light 270-086-14 270-086-18 270-086-22

C-Dark 270-056-14 270-056-18 270-056-22

D-Light 270-087-14 270-087-18 270-087-22

D-Dark 270-057-14 270-057-18 270-057-22

COMING SOON

20

A1

A2

A3

A3.5

A1

A2

A3

A3.5

Nacera® Color Guide 3Y-TZP

14 mm

10.5 mm

7 mm

3.5 mm

0 mm

14 mm

10.5 mm

7 mm

3.5 mm

0 mm

18 mm

13.5 mm

9 mm

4.5 mm

0 mm

18 mm

13.5 mm

9 mm

4.5 mm

0 mm

A-Light

A-Dark

A-Light

A-Dark

Incisal

Body

Cervix

{{{A1

A2

Incisal

Body

Cervix

{{{

Incisal

Body

Cervix

{{{A3

A3.5

Incisal

Body

Cervix

{{{

Incisal

Body

Cervix

{{{A1

A2

Incisal

Body

Cervix

{{{

Incisal

Body

Cervix

{{{A3

A3.5

Incisal

Body

Cervix

{{{

}}

}}

}

}

}

}

Blank thickness

21

A1

A2

A3

A3.5

Our tip no. 2For a maximum aestheticresult in less time, use ceraMotion® One Touch to fi nish the restoration.

22 mm

15.5 mm

11 mm

5.5 mm

0 mm

22 mm

15.5 mm

11 mm

5.5 mm

0 mm

A-Light

A-Dark

Our tip no. 1For more individuality:Combine Nacera® Pearl Multi-Shade with Nacera® Blue X.

This will increase translucency in the incisal area.anslucency in the ea.

Incisal

Body

Cervix

{{{A1

A2

Incisal

Body

Cervix

{{{

Incisal

Body

Cervix

{{{A3

A3.5

Incisal

Body

Cervix{{{

}

}

}

}

Blank thickness

*For informationen on Nacera® Blue X, see page 28.

22

Nacera® Pearl Shaded 16 + 2 3Y-TZP

Nacera® Pearl Shaded is a German premium product made of highly translucent zirconium oxide for restorations with a natural look. The combination of extreme bending strength (1200 MPa) and high light transmission means the blanks can be used for many indications for almost all demands made on restorations using the CAD/CAM process. The homogeneously shaded blanks are available in 16 newly developed shades matching the V-classic shade system and in two bleach shades.


✓ Easy and precise reproduction of the 16 V-classic shades and two bleach shades.

✓ For multiple indications – highly stable while highly translucent, meeting all demands.

✓ Shade and process stability thanks to homogeneous coloring, ensuring consistent color results –

even after re-grinding the framework.

✓ Economic solution, as the dipping process and the use of coloring liquids are no longer necessary.

✓ Excellent machinability without fracturing or chipping – burs last up to 15% longer.

✓ Delivers flawless monolithic restorations with natural aesthetic results.

✓ Flexural strength 1200 MPa (4 point).

44 %translucency

23

Nacera® Pearl Shaded 16 + 2, Ø 98.3 mm

12 mm 14 mm 16 mm 18 mm 20 mm 25 mm

OM 2 270-009-12 270-009-14 270-009-16 270-009-18 270-009-20 270-009-25

OM 3 270-010-12 270-010-14 270-010-16 270-010-18 270-010-20 270-010-25

A 1 270-011-12 270-011-14 270-011-16 270-011-18 270-011-20 270-011-25

A 2 270-012-12 270-012-14 270-012-16 270-012-18 270-012-20 270-012-25

A 3 270-013-12 270-013-14 270-013-16 270-013-18 270-013-20 270-013-25

A 3.5 270-014-12 270-014-14 270-014-16 270-014-18 270-014-20 270-014-25

A 4 270-015-12 270-015-14 270-015-16 270-015-18 270-015-20 270-015-25

B 1 270-021-12 270-021-14 270-021-16 270-021-18 270-021-20 270-021-25

B 2 270-022-12 270-022-14 270-022-16 270-022-18 270-022-20 270-022-25

B 3 270-023-12 270-023-14 270-023-16 270-023-18 270-023-20 270-023-25

B 4 270-024-12 270-024-14 270-024-16 270-024-18 270-024-20 270-024-25

C 1 270-031-12 270-031-14 270-031-16 270-031-18 270-031-20 270-031-25

C 2 270-032-12 270-032-14 270-032-16 270-032-18 270-032-20 270-032-25

C 3 270-033-12 270-033-14 270-033-16 270-033-18 270-033-20 270-033-25

C 4 270-034-12 270-034-14 270-034-16 270-034-18 270-034-20 270-034-25

D 2 270-042-12 270-042-14 270-042-16 270-042-18 270-042-20 270-042-25

D 3 270-043-12 270-043-14 270-043-16 270-043-18 270-043-20 270-043-25

D 4 270-044-12 270-044-14 270-044-16 270-044-18 270-044-20 270-044-25

TipFor quick, aesthetic results: Use ceraMotion® One Touch 2D and 3D pastes to fi nish Nacera® Pearl Shaded 16 + 2 restorations.

Highly translucent – pre-shaded

* For more information, see page 32.

24

Nacera® Shell 1 is a reliable material suitable for all open CAD / CAM systems. The validated manufacturing process ensures that the material properties and the shading of the blanks remain uniform throughout.

Nacera® Pearl 1 3Y-TZP highly translucent – white

Nacera® Standard 98 blanks white are available in Pearl (highly translucent) and Shell (semi-translucent).

Nacera® Pearl 1 is a German premium product made of white, highly translucent zirconium oxide. The blanks are produced in state-of-the-art facilities and are compatible with all standard CAD / CAM systems. Colors can be reliably produced and the machinability of the blanks is excellent.

✓ Very precise shrinkage factors thanks to the Instant Fit Process (I.F.P.)*.

✓ Very high stability against hydrothermal aging.

✓ High strength of 1200 MPa (4 points) for stable implant sub-structures.

✓ Covering of discolored stumps and metal abutments for the veneering technique.

✓ Excellent machinability for precise results.

* IFP = a procedure especially developed to determine exactly the sintering shrinkage of Nacera® zirconium oxide. Each blank is given an individual shrinkage factor with up to five decimal places. This eliminates variations within a batch since the precise factor means sintering results remain constant.

pen cess the

25

TipFor a natural, individual base color:Combine Nacera® Pearl 1 with Nacera® Classic Liquids.

Nacera® Standard 98, white, ø 98.3 mm

10 mm 12 mm 14 mm 16 mm 18 mm 20 mm 25 mm

Nacera® Pearl 1 270-001-10 270-001-12 270-001-14 270-001-16 270-001-18 270-001-20 270-001-25

Nacera® Shell 1 270-002-10 270-002-12 270-002-14 270-002-16 270-002-18 270-002-20 270-002-25

Nacera® Shell 1 3Y-TZP-A semi-translucent – white

*For more information, see page 26.

26

Nacera® Classic Liquids

Nacera® Classic Liquids – a coloring liquid for perfect, natural results, especially in combination with Nacera® Pearl 1 zirconium oxide (3Y-TZP).

Focusing on the essentials – Nacera® Classic Liquids are available in 16 body colors and in various shade modifiers covering the entire chromatic spectrum and enabling flexible, individual production of Nacera® zirconium oxide restorations. Finer details such as mamelons and cervical or interproximal accents are easy to reproduce. The liquids can either be applied directly using a brush, or by dipping. Nacera® Classic Liquids were developed especially for Nacera® Pearl zirconium oxide in order to achieve maximum shading reliability, highest aesthetics and efficiency.

✓ Stabile. Infiltrates deeply into the zirconia to reduce

white spots from grinding.

✓ Flexible. Dipping or brushing technique.

✓ Ready to use. No mixing required – just start.

✓ Clear. Focused on the essence for logical handling.

✓ Complete. Perfect color match. Can be reproduced

reliably for the entire VITA shade range.

27

Nacera® Classic Liquids 50 ml 100 ml

Body A 1 271-011-50 * 271-011-00

Body A 2 271-012-50 * 271-012-00

Body A 3 271-013-50 * 271-013-00

Body A 3.5 271-014-50 * 271-014-00

Body A 4 271-015-50 * 271-015-00

Body B 1 271-021-50 * 271-021-00

Body B 2 271-022-50 * 271-022-00

Body B 3 271-023-50 * 271-023-00

Body B 4 271-024-50 * 271-024-00

Body C 1 271-031-50 * 271-031-00

Body C 2 271-032-50 * 271-032-00

Body C 3 271-033-50 * 271-033-00

Body C 4 271-034-50 * 271-034-00

Body D 2 271-042-50 * 271-042-00

Body D 3 271-043-50 * 271-043-00

Body D 4 271-044-50 * 271-044-00

Diluting 271-050-50 * –

Nacera® Classic Liquids Set

Complete (articles included are marked with *) 271-100-00

Nacera® Classic Liquids accessories

Brush I, Kolinsky-M, 1 piece 271-101-00 *

Brush II, Kolinsky-S, 1 piece 271-102-00

Nacera® pipette, 1 piece 271-103-00 *

Nacera® funnel, 1 piece 271-104-00 *

Nacera® chrono, 1 piece 271-105-00 *

Nacera® tweezers, 1 piece 271-107-00 *

Nacera® Classic Liquids 20 ml

Enamel I 271-051-20 *

Enamel II 271-052-20 *

Effect Blue 271-061-20 *

Effect Grey 271-065-20 *

Effect Brown 271-071-20 *

Balancer 271-074-20 *

Effect Orange 271-075-20 *

28

✓ Flexible. Cusp tips and incisal edges – use where desired on pre-shaded 3Y-TZP zirconium oxide.

✓ Efficient. Anterior aesthetics that cost less – no additional ultra highly-translucent blanks necessary.

✓ Safe. No loss in strength when translucency is increased.

✓ Innovative. Apply translucency and color transition in one stroke.transition in one stroke.

Nacera® Blue X Translucent Liquid

Translucency straight from the bottle!

Nacera® Blue X, applied on Nacera® Pearl 3Y-TZP zirconium oxide, exceeds the properties of lithium disilicate by allowing technicians to apply the right amount of translucency only where desired. The phase transition of the structure increases the translucency on Nacera® Pearl Multi-Shade and Shaded 16+2 by up to 8 %.

A further advantage lies in the strength that remains unchanged. Nacera ® Pearl Zirconia treated with Blue X still has a bending strength of 1200 MPa (4 point bending strength). This is almost double that of cubic zirconia, and up to the three-fold value for lithium disilicate.

Nacera® Blue X

Set

(15 ml Nacera® Blue X Translucent Liquid, brush and mixing dish made of glass)

271-090-00

29

Nacera® Clean cleaning powder

Nacera® Clean is a cleaning powder for the combustion chamber of the sintering furnace. Deposits from coloring liquids appearing in the chamber during the sintering process settle on the insulation of the chamber walls. Aging heating elements also release oxides which lead to discolorations. The reactive Nacera® Clean takes these impurities from the furnace atmosphere, absorbs them and cleans the chamber with a lasting effect. Regular use provides translucent, color-consistent sintering results. An excessive build-up of deposits on the insulation elements and in the chamber are avoided.

Nacera® Clean

Starter Kit 1 x 200 g 271-120-00

Bundle 1 x 200 g + 4 x 30 g 271-122-00

✓ No more yellow or green discoloration of the sintered objects.

✓ Full translucency is achieved.

✓ No particles on the zirconium oxide surface.

✓ Cleans the chamber and removes all contaminations.

✓ Produces reliable, clean sintering results.

For basic cleaning, we recommend the Starter Kit which contains 200 g.

To keep the sintering furnace clean, use the maintenance packages with 30 g.

30

NEW

Nacera® Calibrate

Precise temperature control for perfect sintering results. Nacera® Calibrate is a user-friendly calibration set for your sintering and firing furnaces. The set contains a dial gauge, calibrated reference rings and ceramic measuring rings.

Since the ceramic rings shrink proportionally to the input thermal energy during the sintering or firing process, a dial gauge can be subsequently used to hold the furnace temperature. If deviations from the required or programmed temperature are detected, the sintering or firing furnace can be readjusted accordingly. Nacera® Calibrate controls the correct sintering and firing temperature for perfect translucency and strength. What is most important, however, is the reproducibility of perfect ceramic results each time – for constant, durable and highly aesthetic shade results.

✓ Measure and set the correct temperature for your furnace.

✓ Correct sintering for best results.

✓ Be certain to get best strength and translucency.

✓ Use Nacera® Calibrate to check and verify correct sintering processes –

e.g. for large restorations.

Nacera® Calibrate

Set A

Acrylic tray with 15 calibration rings,reference ring, dial guage and instructions

271-135-00

15 calibration rings for sinter furnaces 271-136-15

15 calibration rings for ceramic furnaces

271-137-15

31

Nacera® Shine zirconium oxide polishing paste

The Nacera® Shine Zr diamond polishing paste delivers a lasting, premium glaze on zirconium oxide in no time at all. The light grey paste is not only effective and time-saving, but also easy to use and efficient.

Whether you are polishing with standard goat hair brushes or high-gloss polishing with cotton or leather buffing wheels: the new polish is as abrasive as it needs to be and as gentle as it can be. Its hard consistency and a special wax / acid mixture that acts as a binding and adhesive agent ensure that the polishing tool only takes as much polish as is required for each process. This avoids any spraying or smearing of excess material, allowing zirconium oxide to be processed cleanly and efficiently, with a more economical use of the high-quality diamond paste.

Nacera® Shine Zr

14 g 271-130-14

Special Edition 14 g (in glass) 271-131-14

NEW

✓ High gloss finish on zirconium restorations in 90 seconds!

✓ Lasting, high-quality luster on zirconium oxide.

✓ Very high diamond content and an exceptionally hard consistency –

for less work and lower costs.

✓ Easy to handle and efficient in terms of consumption.

✓ Time-saving to use.

32

ceraMotion® One Touch – the perfect finish!

The ceraMotion® One Touch set contains 16 single masses as well as special liquids and accessories.

At the heart of the set are color-coordinated 2D and 3D masses in paste form which were specially developed for fully anatomical restorations and for restorations with minimum cut-back. They are compatible with zirconium oxide (e.g. Nacera® Pearl Q3, Nacera® Pearl Shaded 16+2 or Nacera® Pearl Multi-Shade) and lithium disilicate.

✓ Fast and easy handling thanks to ready-mixed ceramic pastes.

✓ Set specially assorted for the easy finishing of aesthetic, fully anatomical restorations.

✓ Maximum aesthetics thanks to color-coordinated 3D pastes.

• Minimal layering (no stains)

• Small changes in shape

• Adding of contact points

✓ 2D pastes – color corrections and characterisations

✓ Paste Glaze – homogeneous and sealed surface after only one firing.

The set contains all of the ceraMotion® One Touch individual components, with the exception of the display. All parts of the set are also available individually.

33

ceraMotion® One Touch pastes, 3 g

2D Body A 250-306-03

2D Body B 250-307-03

2D Body C 250-308-03

2D Body D 250-309-03

2D white 250-310-03

2D grey 250-311-03

2D honey 250-312-03

2D blue 250-313-03

2D violet 250-314-03

3D I2 250-300-03

3D lumin 250-301-03

3D neutral 250-302-03

3D opal blue 250-303-03

3D opal grey 250-304-03

3D opal honey 250-305-03

ceraMotion® One Touch liquids, 10 ml

Diluting Liquid 254-012-01

Refreshing Liquid 254-014-01

ceraMotion® Zr Glaze, 3 g

Paste Glaze 250-271-03

ceraMotion® One Touch brush, 1 piece

2D brush 260-905-20

3D brush 260-906-20

ceraMotion® One Touch accessories

Display (without content) 250-350-00

ceraMotion® One Touch Set

Set 250-800-70

Display including ceraMotion® One Touch.

34

ceraMotion® Zr is a veneering ceramics for zirconium oxide and lithium disilicate. It is part of the ceraMotion® system. A complete, safe and flexible ceramics system – made by users for users.

P

PZr

Zr

Lf

Me

Ti

PMe

ceraMotion® Zr

Every option for processing is open. You can decide between a classic, individual veneer, the cut-back technique, the staining technique and the press or press-over technique. The ceraMotion® system offers a wide variety of products for every option.

EasTe

35

ceraMotion® Zr – the advantages

✓ High bending strength of 115 MPa means more safety.

✓ No feldspar – therefore no fluctuations in product quality.

✓ Low firing temperature of 750 °C.

✓ High shade vitality even after multiple firings.

✓ Homogeneous and bright ceramics already after the first dentine firing.

✓ Maximum bonding strength with zirconium frameworks thanks to ideal CTE setting.

✓ Short firing cycle due to low transformation temperature.

✓ Natural aesthetics due to special masses for opalescence, fluorescence and translucency.

35355

v More information

36

ceraMotion® Zr

ceraMotion® Zr sets

8 Shade Set – REF 250-800-25

Comprehensive assortment with colors (A1, A2, A3, A3.5, B2, B3, C3, D3) for individual layering technique with many incisal and shade modifiers.

Value Concept Set – REF 250-800-60

13 modifiers (dentine and incisal modifiers) to determine the individual brightness and to fulfil the highest demands in the art of layering.

Chroma Concept Set – REF 250-800-55

17 ceramic modifiers with Opaque, Dentines and Bleach modules. This set can be used to achieve all shade tones (standard and bleach modifiers) in shade guides from other companies. (e.g. VITA system 3D-MASTER®* or Ivoclar Chromascop**).

Touch Up Set – REF 250-800-50

9 ceramic materials with Base Dentines, Dentines and incisal materials for easy finishing or correcting thanks to reduced firing temperatures.

Stains Universal Set – REF 254-800-30

16 stains for internal and external effects.

* VITA System 3D-Master® is a registered trademark of Vita Zahnfabrik H. Rauter GmbH & Co.KG, 79704 Bad Säckingen, Germany

** Ivoclar Chromascop is a registered trademark of Ivoclar Vivadent GmbH, Germany

37

Courses and ceraMotion® moments.

[email protected] I Online registration: www.dentaurum.com

Dentaurum and our instructors place great value on hands-on courses, during which participants have the opportunity to apply what they have just learned. Aesthetics play an important role where ceramics are concerned. We were able to put together a team of experts who are dedicated to passing on their knowledge. There are various courses in which we demonstrate how to work with the ceraMotion® system to achieve amazing, highly aesthetic results.

Visit one of our courses with top instructors: Bassam Haddad, Germano Rossi, Haristos Girinis, Waldemar Fritzler – all Master Dental Technicians. Come and see for yourself.

Be sure not to miss our ceraMotion® Lounges and experience exciting ceraMotion® moments.

Come and enjoy an inspiring evening in a wonderful atmosphere. Listen to top-class instructors and professionals experienced in ceramics talk about their personal experiences with ceraMotion® using interesting examples from their daily work in the laboratory.

You can learn many interesting things about ceramics while chatting with the instructors and colleagues and enjoying fingerfood and drinks.

38

Notes

39

Notes

989-

308-

92

Prin

ted

by D

enta

urum

G

erm

any

05

/18/

C/R

1

Dentaurum GroupGermany I Benelux I España I France I Italia I Switzerland I Australia I Canada I USAand in more than 130 countries worldwide.

Turnstr. 31 I 75228 Ispringen I Germany I Phone + 49 72 31 / 803 - 0 I Fax + 49 72 31 / 803 - 295www.dentaurum.com I [email protected]

For more information on our products and services, please visit www.dentaurum.com

Date of information: 05/18

Subject to modifi cations

www.dentaurum.com

DENTAURUMQUALITYWORLDWIDEUNIQUE

dentalia commerce - ceramotion one touch...

Documents