CONTROLS

Through-the-wall, vandal proof basin valve or mixer• Tamperproof through-the-wall control.• Tamperproof through-the-wall, fixed spout for walls ≤ 230mm in chrome-plated brass (942200).

• Anti-rotating pin and back nut system for fixing into the wall.

• ECO flow rate set at 3 lpm at 3 bar.with recessed self-closing mixer ~20 sec M3/4”• for walls ≤ 220 mm 795209

with recessed self-closing valve ~15 sec M1/2”• for walls ≤ 200 mm 741943with Anti-blocking system AB

Back nut F1/2” with 3 screws 826315(straightening clamp behind the wall).> Other spout or through-the-wall rod lengths (150-400mm) available

Vandal proof time flow tap 741945for walls ≤ 147 mm thick• Time flow tap M1/2”, ~15 seconds, with AB anti-blocking

security.• 2 vandal proof cross wall controls.• Vandal proof fixed spout for walls ≤ 155mm thick in

chrome-plated solid brass (942200).• Secured to the wall by an anti-rotating pin and back nut.• ECO flow rate pre-set at 3 lpm at 3 bar.

F1/2” back nut with 3 screws 826315(straightening clamp behind the wall).> Other spout or through-the-wall rod lengths (150-400mm) available

TEMPOSTOP Recessed Control Unit* 747942Tamperproof recessed control unit for renovation.Stainless steel vandal proof recessed box including:• 1 Mixing Water button and 1 Cold Water button.• Fixed spout in chrome-plated brass.• Enclosure plate delivered with 6 fixing points and

tamperproof screws.• Anti-blocking system AB.• ECO flow rate set at 3 lpm at 3 bar.* This model does not have a waterproof recessing box. The installer must ensure that recessing area is waterproof and any leaks or condensates can drain away (see installation guide).

Through-the-wall bubbler 318300

Ø 50Ø 211/2”

1/2”

95 min. 200 max. 31

62

1/2” Ø 21 Ø 48

230 max. 75 6°

1/2”

95 min. 147 31

1/2” Ø 21 Ø 48

155 75 6°

75 6°

100 - 110 4284

198

176x

260

Ø 70Ø 213/4”

31 119 min. 220 max. 54

45

Ø 50

3/4”

31

1/2” Ø 21 Ø 48

230 max. 75 6°

795209

741943

741945

747942

1/2”300

Ø23

Ø36

747942

1

DescriptionSecureflow™ basin control is a pneumatic based control and operates on a ‘dry’ system-using air instead of water to activate the timed flow.3 year warranty.

Advantages• Vandal Resistant

Specifically designed to withstand the most hostile environments.

- Anti-blocking mechanism prevents the tap being blocked on: flow commences only after releasing the push-button.

- No ligature points.- Strength: push-button made from

vandal proof stainless steel (ensuring safe effective water flow whatever the application).

• Reliable Mechanism: Secureflow’s ‘dry’ system using air instead of water to activate the timed flow eliminates the problems associated with lime scale deposits and other water impurities.

• Water Saving- Automatic shut-off: timing adjustable

from 5 seconds to 5 minutes.- Optional limited flow-rate: Secureflow

is available with add-on combined flow regulator / filter to maximise the saving.

• Comfort: smooth opening and automatic shut-off.

Uses• Prisons and Secure Installations.• Healthcare: Mental Health Units where

people may be at risk.

SafetyWe recommend installing a thermostatic mixing valve to provide safe, temperature controlled hot water.

Vandal-proof Button• Anti-blocking safety.• Anti-ligature.

Function• Opens by pressing the push-button• Anti-blocking safety:

Vandal-proof mechanism prevents the tap being blocked on. Flow commences on release of the button (prevents intentional flooding and water wastage).

• Automatic shut-off delay 5 seconds to 5 minutes without hand contact. With Secureflow™, air is pushed over a diaphragm, which opens a small needle valve, which can be adjusted at commissioning to increase or decrease the time flow, between 5 seconds and 5 minutes. Typical time settings:

- washbasins: 10-15 seconds.- showers: 30-45 seconds.

Installation• Water supply: 0.3 to 3 bar. Max. pressure:

10 bar.

• Balances CW and HW pressures (Δ < 1 bar).

• Maximum hot water supply 46°C.

• Maximum air tube length: 3 metres.

• Connections: 1/2’’BSP(F).

Pneumatic Controls

SECUREFLOWTM Through-the-wall Basin ControlAnti-vandal time flow control system complete with air solenoid and diaphragm actuator.• Timing adjustable from 5 seconds to 5 minutes.

(Recommended for basin: 10 to 15 secs, for shower: 30 to 45 secs).

• Optional flow rate regulator.• 1/2’’BSP(F) with Anti-Blocking safety.• Push button in stainless steel and body in DZR brass.

Diaphragm in EPDM rubber.• cross wall 40 for wall thickness up to 15mm 750040

• cross wall 100 for wall thickness up to 75mm 750100

• cross wall 200 for wall thickness up to 175mm 750200

• cross wall 250 for wall thickness up to 225mm 750250The use of isolating ball valve strainers is recommended with this valve.

Wall dimension A=40,100,150 and 200 mmMaterial: Stainless Steel and DZR BrassAll dimensions shown in mm

1.8A

35 1525

34.4 DIA

41.25 DIA 60.0 DIA

Clearance Hole

59

56

50

46

750…

2www.vrsg.co.uk

CONTROLS

SECUREFLOWTM Washbasin Control Set of 2Through-the-wall control for vandal proof washbasins.• Tamperproof, anti-ligature push-button control for walls

≤ 125mm or ≤ 175mm.• Automatic shut-off recommended setting ~10-12 seconds

(adjustable).• Flow rate pre-set at 6 lpm at 3 bar.• Anti-ligature fittings in stainless steel with colour-coded

anodised red and blue markers.• cross wall 200mm, for walls ≤ 175mm 755200WB

• cross wall 150mm, for walls ≤ 125mm 755150WB

SECUREFLOWTM Shower Control SetThrough-the-wall control for vandal proof washbasins.• Tamperproof, anti-ligature push-button control for walls ≤ 125mm or ≤ 175mm.

• Automatic shut-off recommended setting ~30-45 seconds (adjustable).

• Flow rate pre-set at 8 lpm at 3 bar.• Anti-ligature fittings in stainless steel.We recommend a thermostatic mixing valve to provide safe, temperature controlled hot water.

• cross wall 200mm, for walls ≤ 175mm 755200SH

• cross wall 150mm, for walls ≤ 125mm 755150SH

SECUREFLOWTM WC Flush Control Set for CisternsPush-button controls in anti-ligature housing for time flowcontrolled dual or single flush valves c/with cisterns.• Vandal proof, through-the-wall mounting for walls ≤ 175mm or ≤ 125mm.

• Anti-ligature fittings in stainless steel with laser-etched finish.Dual flush control set: rinse 3 L, full flush 6 L c/with cistern.• cross wall 200mm, for walls ≤ 175mm 755200WCDF

• cross wall 150mm, for walls ≤ 125mm 755150WCDF

Single flush control set at 6 L c/with cistern.• cross wall 200mm, for walls ≤ 175mm 755200WC

• cross wall 150mm, for walls ≤ 125mm 755150WC

ANTI-LIGATURE ShowerVandal proof, anti-ligature shower for use in the secure sector.Ceiling-mtd shower head, cover plate Ø140mm CSH320

with stainless steel finish• wall-mounted shower head, cross wall ≤ 235mm 64200

• shower head for panels 1-25mm 64Q40with chrome-plated brass body.

We recommend a thermostatic mixing valve to provide safe, temperature controlled hot water.

52

1/2” BSP

Ø140

CSH320

3

80

75

135

755200WCDF

200/150

1/2”BSP

20

41

Ø35

755200WB

200/150 5

1/2”BSPØ35

60

20

755200SH