degrees oof ccleanliness oof bblast-cleaned ssurfaces

2
White Metal Brush-Off Tightly adherent mill scale and rust may remain on the surface. Mill scale and rust are considered adherent if they cannot be removed with a dull putty knife. Commercial Evenly dispersed very light shadows, streaks and discolorations caused by stains of rust and mill scale may remain on no more than 33% of the surface. Near-white Metal Evenly dispersed very light shadows, streaks and discolorations caused by stains of rust and mill scale may remain on 5% of the surface. White Metal Free of all visible oil, grease, dirt, dust, mill scale and rust. D De e g g r r e e e e s s o o f f C C l l e e a a n n l l i i n n e e s s s s o o f f B Bl l a a s s t t - - C C l l e e a a n n e e d d S S u u r r f f a a c c e e s s* SSPC-SP 7 NACE No. 4 SA-1 SSPC-SP 6 NACE No. 3 SA-2 SSPC-SP 10 NACE No. 2 SA-2 1/2 SSPC-SP 5 NACE No. 1 SA-3 *Images shown are previously uncoated surfaces, viewed without magnification For the complete official guide to surface cleanliness, refer to SSPC-Vis-1: Guide and Reference Photographs for Dry Abrasive Blast Cleaning; SSPC Publication 02-12 www.sspc.org Key: Steel where mill scale has started to flake and light rusting occurs. Key: Steel where all mill scale has flaked off and complete rusting has occured. Key: Steel where pitting and complete rusting has taken place. Commercial Near-White Metal Brush-Off Brush-Off Brush-Off Commercial Commercial Near-White Metal Near-White Metal White Metal White Metal

Upload: others

Post on 05-Jan-2022

3 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Degrees oof CCleanliness oof BBlast-Cleaned SSurfaces

White Metal

Brush-OffTightly adherent mill scale and rust mayremain on the surface. Mill scale and rustare considered adherent if they cannot beremoved with a dull putty knife.

CommercialEvenly dispersed very light shadows,streaks and discolorations caused by stainsof rust and mill scale may remain on nomore than 33% of the surface.

Near-white MetalEvenly dispersed very light shadows,streaks and discolorations caused by stainsof rust and mill scale may remain on 5%of the surface.

White MetalFree of all visible oil, grease, dirt, dust,mill scale and rust.

DDeeggrreeeess ooff CClleeaannlliinneessss ooff BBllaasstt--CClleeaanneedd SSuurrffaacceess*

SSPC-SP 7NACE No. 4SA-1

SSPC-SP 6NACE No. 3SA-2

SSPC-SP 10NACE No. 2SA-2 1/2

SSPC-SP 5NACE No. 1SA-3

*Images shown are previously uncoated surfaces, viewed without magnification

For the complete official guide to surface cleanliness, refer to SSPC-Vis-1: Guide and Reference Photographs for Dry Abrasive Blast Cleaning; SSPC Publication 02-12 www.sspc.org

Key: Steel where mill scale has started to flakeand light rusting occurs.

Key: Steel where all mill scale has flakedoff and complete rusting has occured.

Key: Steel where pitting and complete rustinghas taken place.

Commercial

Near-White Metal

Brush-Off Brush-Off Brush-Off

Commercial Commercial

Near-White Metal Near-White Metal

White Metal White Metal

Page 2: Degrees oof CCleanliness oof BBlast-Cleaned SSurfaces

USA • PHONE 636 239 0300 • Fax 800 726 7559 • [email protected] • PHONE 49 8062 90080 • Fax 49 8062 900850 • [email protected]

DENMARK • PHONE 45 86 51 10 33 • Fax 45 86 51 08 00 • [email protected] • PHONE 34 94 453 5712 • Fax 34 94 453 6012 • [email protected]

SINGAPORE • PHONE 65 689 77206 • Fax • 65 689 77207 • [email protected]

©2007 Clemco Industries Corp. • Washington, MO 63090 • www.clemcoindustries.com

Impact of Nozzle Wear on Air Consumption

System Air Volume Requirements at 100 PSI

Compressed Air and Abrasive Consumption Pressure Loss in Air Hose

Abrasive Comparison

®

Distributed By

JN 2064-0998, Rev. D 06/07Stock No. 21932