defend bur catalog - front 2018
TRANSCRIPT
01
Usage and Maintenance.......................................................................................................................... 01
Carbide Bur Product Listing................................................................................................................... 02
Diamond Bur Product Listing........................................................................................................... 03-04
Diamond Bur Cross-Reference Chart............................................................................................ 05-06
Diamond BurPrecision centered Japan-made stainless steel #303
German electroplating technology
Minimal pressure required on turbine
Concentric, balanced bur with long lasting cutting ability
Maximum precision and minimum vibration
Superior cutting eοΏ½ciency and long instrument life
Rapid, smooth and comfortable cutting
10 Burs Per Blister Pack
Carbide BurMade of Austrian Carbide
Exceeds the International Standard
Gives a fast, smooth vibration free performance, reducing patient discomfort as well as operative time
Less stress on the handpiece and reduces the risk of early chuck failure
This produces a longer lasting, durable bur, which is cost eοΏ½ective and a better value for the money
100% inspected by infrared
10 Burs Per Blister PackBulk Packs of 100 Available
Table of Contents
Features & Benefits
Usage and Maintenance
General Rotary Instrument Usage Tipsβ Sterilize burs prior to each useβ Burs should be replaced frequently to maintain efficiency and reduce riskβ Never force a bur into the turbine and avoid putting pressure on the bur when in useβ Observe recommended speeds to avoid excessive heatβ Do not keep the bur still to avoid burning of the burβ Always insert the bur fully into the handpiece chuckβ Always use sufficient water coolantβ Do not use a bur in a worn chuck
MaintenanceCleaningβ Pre-soak the burs in a disinfection solution that contains a corrosion inhibitorβ Use a brush to clean the burs and rinse thoroughlyβ Dry the burs and store in a clean and moisture-free environment
Cleaning with UltraSonicβ Insert burs in bur holdersβ Use DEFEND General Purpose Cleaner at a cycle of 5 minutes β Rinse thoroughly all cleaning solutionβ Dry and store in a clean and moisture-free environment Sterilizationβ Place the burs in a DEFEND sterilization pouch and sterilize burs according to your autoclave manufacturer recommendationsβ Dry the burs and store in a clean and moisture-free environmentβ When using dry heat sterilization, refer to the manufacturerβs instructions, to avoid the corrosion and dulling of carbide bursβ Avoid cold sterilizing solutions
Bur Diameter (1/10mm)007-014016-023025-045047-065066-094
Maximum RPMFG
450,000300,000120,00080,00060,000
Note: It is the responsibility of the user to ensure that the method of sterilization is effective
ISO Grit Reference
M = Normal/Medium BLUESC = Super Coarse BLACKC = Coarse GREENF = Fine REDSF = Super Fine YELLOW
02
Carbide Operative Burs
ROUND
DOMED FISSURE PLAIN CUT
U.S. No. 1156 1157 1158
Diamter (mm) 0.90 1.00 1.20
FG
Carbide Trimming and Finishing Burs
Surgical Burs
TAPER POINTED
U.S. No. 12 Flutes
0.14
7612
Diameter (mm)
TF 12 Flutes
Egg: For contouring and οΏ½nishing occlusal andlingual surfaces.
EGG
U.S. No. 12 Flutes 7404
1.40 1.80 2.30
7406 7408
Diameter (mm)
TF 12 Flutes
FLAME
U.S. No. 12 Flutes
1.40
7104
Diameter (mm)
TF 12 Flutes
Needle: For Contouring and οΏ½nishing interproximal margins, Occlusal margins, facial Surfaces and cavosurface margins.
NEEDLE
U.S. No. 12 Flutes 7901
0.90 1.00 1.20
7902 7903
Diameter (mm)
TF 12 Flutes
Round: For caries excavation, cavity preparation, and root canal access. Smaller sizes often used for single surface cavities, medium sizes oftenused for interproximal cavities in anterior teeth.
Inverted Cone: For producing undercuts in cavity preparations; slightly rounded edges on the blade corners reduce chipping for a smoother cut. Ideal for amalgam removal; may also be used to contour the occlusal anatomy of οΏ½nal restorations and for οΏ½attening pulpal and gingival walls.
Pear: For contouring the occlusal anatomy, preparing cavities, and removing amalgam. Produces an under-cut preparation with round internal line angles.
Domed Fissure Plain Cut/Domed Fissure Cross Cut: For producing a preparation with straight, parallel, or minimally divergent walls with round internal line angles. Also used to gain access to carious dentin, establish preparation form, and create retentive locks. Cross cut burs have more cutting edges.
Flat Fissure Plain Cut/Flat Fissure Cross Cut: For producing preparations with straight parallel sides and οΏ½at οΏ½oors, gaining access to carious dentin, establishing preparation form, and creating retentive locks. Cross cut burs have more cutting edges.
End Cutting: Used to produce a οΏ½at preparationοΏ½oor, reοΏ½ne preparations, and to mark the depth of bone reduction in crown lengthening. Help reduce any possibility of impacting the surface of the adjacent tooth with the cutting surface of a bur.
Taper Fissure Plain Cut/Taper Fissure Cross Cut: For producing a preparation with tapered, divergent walls and a οΏ½at οΏ½oor. Also used for inlay/onlay preparation and to section teeth and cut bone. Cross cut burs have more cutting edges.
Twelve bladed οΏ½nishing burs (7000 series) provide a smooth οΏ½nish on composite, amalgam, enamel, dentin, orthodebonding, and other dental materials. Best for controlled contouring and οΏ½nishing.
ROUND
U.S. No.010
FG-2XL FG-4XL FG-6XL FG-8XL014 018 023
2 4 6 8FG SURG. (25mm)10 PACK
U.S. No.010
FG-557XL FG-558XL012
557 558FG SURG. (25mm)10 PACK
FLAT FISSURE CROSSCUTFLAT FISSURE
PLAINCUT
U.S. No.012
FG-58XL
58
FG SURG. (25mm)10 PACK
CROSS CUTTAPERED FISSURE
U.S. No.014
FG-701XL FG-702XL016
701 702FG SURG. (25mm)10 PACK
AMALGAM PREP
U.S. No.
Diameter (mm) 0.80
FG
245U.S. No. 1/40.50 0.70 0.80 1.00 1.40 1.80 2.30
1/2 1 2 4 6 8
Diameter (mm)FG
RA
FLAT FISSURE PLAIN CUT
U.S. No. 56 57 58Diameter (mm) 0.90 1.00 1.20
FG
FG (short shank)
INVERTED CONE
Diameter (mm) 0.70 0.80 1.00 1.40
FG
RA
U.S. No. 33.5 34 35 37
FLAT FISSURE CROSS CUT
U.S. No.Diameter (mm) 0.90 1.00 1.20
FGFG (short shank)
RA
556 557 558
TAPER FISSURE CROSS CUT(LONG HEAD)
U.S. No. 700L 701L
Diamter (mm) 1.00 1.20
FG
TAPER FISSURE PLAIN CUT
U.S. No. 169 170 171
Diameter (mm) 0.90 1.00 1.20
FG
DOMED FISSURECROSS CUT
U.S. No. 1557 1558
Diamter (mm) 1.00 1.20
FG
TAPER FISSURE PLAIN CUT (LONG HEAD)
U.S. No. 169L 170L 171L
Diamter (mm) 0.90 1.00 1.20
FG
TAPER FISSURE CROSS CUT
U.S. No. 699 700 701 702 703
Diamter (mm) 0.90 1.00 1.20 1.60 2.10FG
RA
FLAT FISSURE CROSS CUT(LONG HEAD)
558L557LU.S. No.Diameter (mm) 1.00 1.20
FG
END CUTTING BURS
U.S. No. 957
Diamter (mm) 1.00
FG
958
1.10
PEAR
U.S. No. 329 330 331 332
0.60 0.80 1.00 1.20
FG
FG SS
Diameter (mm)
www.defend.com
Diamond Burs
0303
Code 850.012
1.2
10.0 10.0 10.0 10.0 8.08.08.0
C C C C C C C
SCSCSC
C
1.4 1.6
850.014 850.016 850.018 856.012 856.014 856.016
Diameter (mm)
Head Length (mm)
Super Fine
Fine
Medium
Coarse
Super Coarse
1.8 1.2 1.4 1.6
MMM
C
MM M M
F FSF
F
ROUND END TAPER CONTINUED
Code
8.0
9.0 9.0
SC SC
SC SC SC SC
C
F
C C
2.5
1.6
856.025
856L.016 856L.018
Diameter (mm)
Head Length (mm)
Super Fine
Fine
Medium
Coarse
Super Coarse
1.8
M M
8.0
852.010
1.0
9.0
SC
856.018
1.8
M
F
C
8.0
856.021
2.1
9.0
C
1.4
856L.014
M
NEEDLE
Code 858.010
1.0
8.0 8.0 8.0 10.0 10.0 10.0
C C C
FFFF F F
1.2 1.4
858.012 858.014 859.010 859.012 859.016
Diameter (mm)
Head Length (mm)
Super Fine
Fine
Medium
Coarse
Super Coarse
1.0 1.2 1.6
FLAME
Code
4.0 6.0 8.0 8.0 10.0 10.0 10.0
C C C
F FF FFF
F
SF SF SFSF
C
1.0 1.4
860.010 861.014
6.0
1.2
861.012 862.012 862.014 863.010 863.012 863.016
Diameter (mm)
Head Length (mm)
Super Fine
Fine
Medium
Coarse
Super Coarse
1.2
8.0
861.016
1.6 1.4 1.0 1.2 1.6
M MM M
8.0
C
F
862.016
1.4
M M
M M M
M
M
M M
5.0
1.2
860.012
M
F
M
GINGIVAL CURETTAGE
Code
1.0
8.0 8.0 10.0 10.0
C C C C
1.2 1.2 Diameter (mm)
Head Length (mm)
Super Fine
Fine
Medium
Coarse
Super Coarse
1.4
M M
BEVELED CYLINDER
Code 878.012
1.2
8.0 8.0
C
M
877.010
1.0
6.0
C
M
877K.012
1.2
6.0
C
1.4
878.014
Diameter (mm)
Head Length (mm)
Super Fine
Fine
Medium
Coarse
Super Coarse
SC SC
10.0
863.018
1.8
M
10.0
C
886-016
1.6
M
879-012
1.2
9.5
C
SF: Super Fine F: Fine M: Medium C: Coarse SC: Super Coarse
850.010
1.0
10.0
C
M
879-014
1.4
10.0
C
M
8.0
C
1.6
878K-016
M
8.0
C
1.2
878K-012885-010 885-012 886-012 886-014
ROUND END TAPER
www.defend.com
Diamond Burs
04
ROUND ROUND & NECK INVERTED CONE
DOUBLE INVERTED CONE BARREL LONG PEAR
Code Code
Code Code Code
805.12
806.012 811.033 830L.012
1.2
1.2 3.3 1.23.7
5.5 4.05.5
1.3
3.0
M
C C C
F
SF
C C C
M
C C C C C
SCSC
C C
F F
M
M
M M
F
M M
1.2 1.6
1.4
1.2 1.4
2.0
1.4 1.8
1.4 1.6
801.012 805.016
806.014 811.037
801.014 805.018801.016 807.014801.018 801.023 802.012 807.016
Diameter (mm) Diameter (mm)
Diameter (mm) Diameter (mm) Diameter (mm)
Head Length (mm) Head Length (mm)
Head Length (mm) Head Length (mm) Head Length (mm)
Super Fine Super Fine
Super Fine Super Fine Super Fine
Fine Fine
Fine Fine Fine
Medium Medium
Medium Medium Medium
Coarse Coarse
Coarse Coarse Coarse
Super Coarse Super Coarse
Super Coarse Super Coarse Super Coarse
1.6 1.4
1.6 3.0
1.8 2.3
2.3
1.2
1.2
C
M
802.014
1.4
1.4
C
M
802.016
1.6
1.6
1.6
1.8 4.0
M
M M
M M M
EGG/FOOTBALL
Code
F
M MM M M
F F F F
SF
CCC C
SC SC SC SCSC
C
SF SF SF
1.8
4.5
2.3
5.3
368.018 368.023 379.016 379.018 379.023
Diameter (mm)
Head Length (mm)
Super Fine
Fine
Medium
Coarse
Super Coarse
1.6
3.4
1.8 2.3
3.6 4.4
ROUND END CYLINDER
Code 838.009
0.9
8.0
F F
Diameter (mm)
Head Length (mm)
Super Fine
Fine
Medium
Coarse
Super Coarse
M
1.0
1.0
801.010 805.10
1.0
1.3
M
C
1.6
2.0
806.016
M
C
1.4
2.0
813.014
M
C
1.6
2.0
813.016
M
806.010
1.0
3.0
C
M
C
2.0
5.3
368.020
C
2.3
5.3
369.025
M M M M M M M MM
CCC
SC
CCCC
FLAT END CYLINDER
Code 835.008
0.8
4.0 4.0 4.0 4.0 5.6 6.0 8.0 8.0 8.0 8.0
1.0 1.2
835.010 835.012 835.014 836.012 836.014 837.012 837.014 837.016 837.018
Diameter (mm)
Head Length (mm)
Super Fine SF
Fine
Medium
Coarse
Super Coarse
1.4 1.2 1.4 1.2 1.4 1.6 1.8
FLAT END TAPER
Code
8.0 8.5 8.0 8.0 10.0 10.0
C C C C
1.4
847.014 847.016 847.018 848.010 848.016 848.018
Diameter (mm)
Head Length (mm)
Super Fine
Fine
Medium
Coarse
Super Coarse
1.6 1.8 1.0 1.6 1.8
MMM MM
SF: Super Fine F: Fine M: Medium C: Coarse SC: Super Coarse
M
INTER PROXIMAL
Code 392-016
1.6
5.0
SF
F
Diameter (mm)
Head Length (mm)
Super Fine
Fine
Medium
Coarse
Super Coarse
05
Diamond Burs Cross Reference Chart
Grit Henry Schein DEFEND Brasseler USA DEFEND Meisenger DEFEND Axis DEFEND Midwest DEFEND
Round M 112β5177 801β010M β’ β’ β’ β’ β’ β’ β’ β’ M 112β5178 801β012M 004161U0 801β012M 801β012 801β012M M801β012 801β012M 471010 801β012M C β’ β’ 004781U0 801β012C 801Gβ012 801β012C C801β012 801β012C 471019 801β012C M 112β5179 801β014M 004162U0 801β014M 801β014 801β014M M801β014 801β014M 471011 801β014M C 112β5185 801β014C 004782U0 801β014C 801Gβ014 801β014C C801β014 801β014C 471020 801β014M M 112β5181 801β016M 004163U0 801β016M 801β016 801β016M M801β016 801β016M 471012 801β016M C 112β5126 801β016C 004783U0 801β016C 801Gβ016 801β016C C801β016 801β016C 471021 801β016C M 112β5182 801β018M 004164U0 801β018M 801β018 801β018M M801β018 801β018M 471013 801β018M C β’ β’ 004784U0 801β018C 801Gβ018 801β018C C801β018 801β018C 471022 801β018C M 112β5184 801β023M β’ β’ β’ β’ β’ β’ β’ β’ C 112β5127 801β023C β’ β’ β’ β’ β’ β’ β’ β’
Round & Neck M 112β5186 802β012M β’ β’ β’ β’ β’ β’ β’ β’ M 112β5187 802β014M β’ β’ β’ β’ β’ β’ β’ β’ C 112β5190 802β014C β’ β’ β’ β’ β’ β’ β’ β’ M 112β5188 802β016M β’ β’ β’ β’ β’ β’ β’ β’
Inverted Cone M 112β5191 805β010M β’ β’ β’ β’ β’ β’ β’ β’ F 112β5192 805β012F β’ β’ β’ β’ β’ β’ β’ β’ M 112β5192 805β012M β’ β’ β’ β’ β’ β’ β’ β’ M 112β5193 805β016M β’ β’ β’ β’ β’ β’ β’ β’ C β’ β’ β’ β’ 805Gβ016 805β016C C805β016 805β016C β’ β’ M 112β5206 807β014M β’ β’ 807β014 807β014M β’ β’ β’ β’ M 112β5207 807β016M 004236U0 807β016M 807β016 β’ M807β016 807β016M 471055 807β016M C 112β5208 807β016C β’ β’ β’ β’ β’ β’ β’ β’ M 112β5196 806β010M β’ β’ β’ β’ β’ β’ β’ β’ M 112β5199 806β012M β’ β’ β’ β’ β’ β’ β’ β’ M 112β5201 806β016M β’ β’ β’ β’ β’ β’ β’ β’ C 112β5205 806β016C β’ β’ β’ β’ β’ β’ β’ β’
Double Inverted Cone C 112β5202 806β012C 004797U0 806β012C 806Gβ012 806β012C C806β012 806β012C β’ β’ M 112β5200 806β014M 004225U0 806β014M 806β014 806β014M M806β014 806β014M β’ β’
Barrel C 112β5128 811β033C 017277U0 811β033C 811Gβ033 811β033C C811β033 811β033C 471060 811β033C SC 112β5129 811β033SC β’ β’ β’ β’ β’ β’ β’ β’ C 112β6242 811β037C 017278U0 811β037C β’ 811β037C C811β037 811β037C 471061 811β037C SC 112β6243 811β037SC 012925U0 811β037SC β’ β’ SC811β037 811β037SC 471063 811β037SC M 112β5214 813β014M β’ β’ β’ β’ β’ β’ β’ β’ M 112β5213 813β016M β’ β’ β’ β’ β’ β’ β’ β’
Pear M β’ β’ 004954U0 830Lβ012M β’ β’ M830Lβ012 830Lβ012M β’ β’
Egg/Football SF 112β5174 368β018SF β’ β’ β’ β’ SF368β018 368β018SF β’ β’ F 112β5102 368β018F β’ β’ β’ β’ F368β018 368β018F β’ β’ M 112β5173 368β018M β’ β’ β’ β’ M368β018 368β018M β’ β’ C 112β5103 368β018C β’ β’ β’ β’ C368β018 368β018C β’ β’ SF 112β5104 368β023SF 005256U0 368β023SF β’ β’ SF368β023 368β023SF 471414 368β023SF F 112β5105 368β023F 004960U0 368β023F β’ β’ F368β023 368β023F 471415 368β023F M 112β5106 368β023M 004085U0 368β023M β’ β’ M368β023 368β023M 471416 368β023M C 112β5108 368β023C 004768U0 368β023C β’ β’ C368β023 368β023C 471417 368β023C SC 112β5109 368β023SC 015169U0 368β023SC β’ β’ SC368β023 368β023SC 471418 368β023SC C 112β5110 369β025C β’ β’ β’ β’ β’ β’ β’ β’ F 112β5113 379β016F 004965U0 379β016F β’ β’ F379β016 379β016F 471422 379β016F M 112β5114 379β016M β’ β’ β’ β’ β’ β’ β’ β’ C 112β5115 379β016C β’ β’ β’ β’ β’ β’ β’ β’ SF 112β5117 379β018SF β’ β’ β’ β’ β’ β’ β’ β’ F 112β5118 379β018F 017165U0 379β018F β’ β’ F379β018 379β018F 471423 379β018F M 112β5175 379β018M 004092U0 379β018M β’ β’ M379β018 379β018M 471424 379β018M C 112β5119 379β018C β’ β’ β’ β’ C379β018 379β018C β’ β’ SF 112β5296 379β023SF 005258U0 379β023SF β’ β’ SF379β023 379β023SF 471399 379β023SF F 112β5121 379β023F 004967U0 379β023F β’ β’ F379β023 379β023F 471400 379β023F M 112β5122 379β023M 004093U0 379β023M β’ β’ M379β023 379β023M 471427 379β023M C 112β5123 379β023C 013889U0 379β023C β’ β’ C379β023 379β023C 471428 379β023C SC 112β5124 379β023SC β’ β’ β’ β’ β’ β’ β’ β’
Interproximal SF β’ β’ 005281U0 392β016SF β’ β’ SF392β016 392β016SF 471447 392β016SF F 112β5125 392β016F 004969U0 392β016F β’ β’ F392β016 392β016F 471448 392β016F
Flat End Cylinder M 112β5219 835β010M 004345U0 835β010M 835β010 835β010M M835β010 835β010M β’ β’ M 112β5220 835β012M β’ β’ β’ β’ β’ β’ β’ β’ C 112β5222 835β012C 004810U0 835β012C 835Gβ012 835β012C C835β012 835β012C β’ β’ M 112β5221 835β014M β’ β’ β’ β’ β’ β’ β’ β’ M 112β5223 836β012M β’ β’ β’ β’ β’ β’ β’ β’ C 112β5224 836β014C β’ β’ β’ β’ β’ β’ β’ β’ M β’ 837β012M 004368U0 837β012M 837β012 837β012M M837β012 837β012M 471086 837β012M C β’ 837β012C 004818U0 837β012C 837Gβ012 837β012C C837β012 837β012C 471089 837β012C M 112β5225 837β014M 004369U0 837β014M 837β014 837β014M M837β014 837β014M 471087 837β014M C β’ 837β014C 004819U0 837β014C 837Gβ014 837β014C C837β014 837β014C 471090 837β014C SC β’ 837β014SC β’ β’ β’ β’ β’ β’ β’ β’ M 112β5226 837β016M 004370U0 837β016M 837β016 837β016M M837β016 837β016M 471088 837β016M C β’ 837β016C 004820U0 837β016C 837Gβ016 837β016C C837β016 837β016C 471091 837β016C C 112β5227 837β018C β’ β’ β’ β’ β’ β’ β’ β’
Diamond Burs Cross Reference Chart
www.defend.com
Grit Henry Schein DEFEND Brasseler USA DEFEND Meisenger DEFEND Axis DEFEND Midwest DEFEND
Round End Cylinder M 112β5218 838β009M β’ β’ β’ β’ β’ β’ β’ β’
Flat End Taper C β’ 847β014C 004836U0 847β014C 847Gβ014 847β014C C847β014 847β014C 471128 847β014C F β’ 847β016F β’ β’ β’ β’ β’ β’ β’ β’ M 112β5232 847β016M 004418U0 847β016M 847β016 847β016M M847β016 847β016M 471125 847β016M C 112β5138 847β016C 004837U0 847β016C 847Gβ016 847β016C C847β016 847β016C 471129 847β016C M 112β5233 847β018M β’ β’ β’ β’ β’ β’ β’ β’ M 112β5234 848β016M 004425U0 848β016M 848β016 848β016M M848β016 848β016M 471154 848β016M C β’ 848β016C 004842U0 848β016C 848Gβ016 848β016C C848β016 848β016C 471158 848β016C C 112β5236 848β018C β’ β’ β’ β’ β’ β’ β’ β’
Round End Taper C 112β5139 850β012C 850Gβ012 850β012C C850β012 850β012C β’ β’ β’ β’ C 112β5140 850β014C 004850U0 850β014C 850Gβ014 850β014C C850β014 850β014C 471174 850β014C F β’ 850β016F 015979U0 850β016F 850Fβ016 850β016F F850β016 850β016F 471168 850β016F C 112β5141 850β016C 004851U0 850β016C 850Gβ016 850β016C C850β016 850β016C 471175 850β016C F β’ 850β018F β’ 850β018F 850Fβ018 850β018F F850β018 850β018F β’ β’ M 112β5237 850β018M 004450U0 850β018M 850β018 850β018M M850β018 850β018M 471172 850β018M C 112β5238 850β018C 004852U0 850β018C 850Gβ018 850β018C C850β018 850β018C 471176 850β018C M 112β5239 852β010M β’ β’ β’ β’ β’ β’ β’ β’ C 112β5144 856β012C 004862U0 856β012C β’ β’ C856β012 856β012C 471207 856β012C SC 112β5145 856β012SC β’ β’ β’ β’ β’ β’ β’ β’ M 112β5147 856β014M β’ β’ β’ β’ β’ β’ β’ β’ C 112β5148 856β014C 004863U0 856β014C β’ β’ C856β014 856β014C 471208 856β014C SC 112β5149 856β014SC β’ β’ β’ β’ β’ β’ β’ β’ F 112β5150 856β016F 005041U0 856β016F β’ β’ F856β016 856β016F 471198 856β016F M 112β5151 856β016M 004488U0 856β016M β’ β’ M856β016 856β016M 471203 856β016M C 112β5152 856β016C 004864U0 856β016C β’ β’ C856β016 856β016C 471209 856β016C SC 112β5153 856β016SC 004745U0 856β016SC β’ β’ SC856β016 856β016SC 471215 856β016SC F 112β5154 856β018F 001734U0 856β018F β’ β’ F856β018 856β018F 471199 856β018F M 112β5244 856β018M 004489U0 856β018M β’ β’ M856β018 856β018M 471204 856β018M C 112β5155 856β018C 004865U0 856β018C β’ β’ C856β018 856β018C 471210 856β018C SC 112β5156 856β018SC 004746U0 856β018SC β’ β’ SC856β018 856β018SC 471216 856β018SC C β’ 856β025C 004866U0 856β025C β’ β’ C856β025 856β025C 471212 856β025C M 112β5158 856Lβ016M β’ β’ β’ β’ β’ β’ β’ β’ C 112β5159 856Lβ016C β’ β’ 005304U0 856Lβ016C β’ β’ 471241 856Lβ016C SC 112β5160 856Lβ016SC β’ β’ β’ β’ β’ β’ β’ β’ C 112β5161 856Lβ018C β’ β’ 005305U0 856Lβ018C β’ β’ 471242 856Lβ018C SC 112β5162 856Lβ018SC β’ β’ β’ β’ β’ β’ β’ β’
Needle F β’ β’ β’ β’ 858Fβ010 858β010F F858β010 858β010F β’ β’ M 112β5246 858β012M β’ β’ β’ β’ M858β012 858β012M β’ β’ M β’ β’ 004495U0 858β014M 858β014 858β014M M858β014 858β014 471251 858β014 C β’ β’ 004868U0 858β014C β’ β’ β’ β’ 471253 858Gβ014 F 112β5165 859β010F 005046U0 859β010F 859Fβ010 F859β010 β’ β’ β’ β’
Flame M 112β5255 860β010M 004510U0 860β010M 860β010 860β010M β’ β’ β’ β’ M 112β5256 861β012M β’ β’ β’ β’ β’ β’ β’ β’ M 112β5258 861β016M β’ β’ β’ β’ β’ β’ β’ β’ SF β’ β’ 005374U0 862β012SF 862Cβ012 SF862β012 β’ β’ 471260 SF862β012 F β’ β’ 005053U0 862β012F 862Fβ012 F862β012 β’ β’ 471263 F862β012 M 112β5259 862β012M 004520U0 862β012M 862β012 M862β012 β’ β’ 471267 M862β012 C β’ β’ 004878U0 862β012C 862Gβ012 C862β012 β’ β’ 471271 C862β012 SF 112β5260 862β014SF β’ β’ 862Cβ014 SF862β014 β’ β’ β’ β’ F β’ β’ 015568U0 862β014F 862Fβ014 F862β014 β’ β’ 471264 F862β014 C β’ β’ 004879U0 862β014C 862Gβ014 C862β014 β’ β’ 471272 C862β014 M 112β5261 862β016M β’ β’ β’ β’ β’ β’ β’ β’ F 112β5167 863β010F β’ β’ F863β010 863β010F β’ β’ β’ β’ SF 112β5263 863β012SF β’ β’ β’ β’ β’ β’ β’ β’ F β’ β’ 005056U0 863β012F 863Fβ012 F863β012 β’ β’ β’ β’ M 112β5262 863β012M 004529U0 863β012M 863β012 M863β012 β’ β’ β’ β’ C 112β5168 863β012C 004883U0 863β012C 863Gβ012 C863β012 β’ β’ β’ β’ M 112β5264 863β016M 004530U0 863β016M 863β016 M863β016 β’ β’ β’ β’ C β’ β’ 004884U0 863β016C 863Gβ016 C863β016 β’ β’ β’ β’
Gingival Curettage M 112β5294 877Kβ012M β’ β’ β’ β’ β’ β’ β’ β’ M 112β5288 878Kβ012M β’ β’ β’ β’ β’ β’ β’ β’ M 112β5290 878Kβ016M β’ β’ β’ β’ β’ β’ β’ C β’ 878Kβ016C 005317U0 878Kβ016C β’ β’ 878Kβ016C C878Kβ016 471326 878Kβ016C
Beveled Cylinder M 112β5266 877β010M β’ β’ β’ β’ β’ β’ β’ β’ M 112β5267 878β012M 004560U0 878β012M 878β012 M878β012 878β012 M878β012 471304 878β012 C 112β5169 878β012C 004890U0 878β012C 878Gβ012 C878β012 878Gβ012 C878β012 471307 878Gβ012 M 112β5268 878β014M β’ β’ β’ β’ β’ β’ β’ β’ C 112β5269 878β014C 004891U0 878β014C 878Gβ014 C878β014 878Gβ014 C878β014 471308 878Gβ014 M 112β5271 879β012M β’ β’ β’ β’ β’ β’ β’ β’ M 112β5272 879β014M β’ β’ β’ β’ β’ β’ β’ β’ C 112β5273 879β014C β’ β’ β’ β’ β’ β’ β’ β’ M 112β5280 885β010M β’ β’ β’ β’ β’ β’ β’ β’ C β’ 885β010C β’ β’ β’ β’ β’ β’ β’ β’ C β’ 885β012C 004899U0 885β012C 885Gβ012 C885β012 β’ β’ 471352 C885β012 C β’ 886β014C 012181U0 886β014C 886β012 M886β012 β’ β’ β’ β’ C 112β5284 886β016C 004901U0 886β016C 886Gβ016 C886β016 β’ β’ β’ β’
06
Mydent International is a proud supporter of OSAP, the Organization for Safety, Asepsis and Prevention. OSAP advocates for the safe and infection-free delivery of oral care. OSAP targets its message to dental and other healthcare professionals, academia, consultants, researchers and organizations that include non-governmental organizations (NGOs), government agencies, and even manufacturing and distribution companies -- it's a trusted resource for everyone who is responsible for safe dental care...because safety matters! Learn more at www.osap.org.
Mydent International is an accredited business with the Better Business Bureau (BBB) and has a prestigious A+ rating. Since 1985, we have committed ourselves to providing ethical business practices, honest advertising and safeguarding customer privacy.
Mydent International is proud to be a longtime member of the Dental Trade Alliance. The DTA is an association of companies that provide dental equipment, supplies, materials and services to dentists and other oral care professionals. Our member companies are distributors, dental laboratories & manufacturers located in the United States, Canada and Mexico. By providing the best equipment, materials and services to dentists and oral care professionals, we are partners in improving the oral health of everyone.
With Autism rates estimated as high as 1 in 91 children, Mydent feels compelled to take action. That is why a portion of the proοΏ½ts from every DEFEND product sold will go to Autism Speaks. Founded in 2005, Autism Speaks has quickly grown to become the nationβs largest and most effective autism science and advocacy organization. They are dedicated to funding global biomedical research into the causes, prevention, treatments, and cure for autism. Mydent is proud to play a small part in helping them to change the future for all who struggle with autism spectrum disorders. We urge you to learn more at www.autismspeaks.org.
Mydent is also becoming an industry leader in environmentally responsible manufacturing and distribution practices. We are committed to a reduction of our carbon footprint, using earth-friendly materials and processes wherever possible. From recyclable and reduced packaging, high order practices, reducing emissions as well as βgreenβ practices at our own headquarters, we are committed to a philosophy of being environmentally responsibleβ¦Today and Tomorrow.
Mydent AfοΏ½liations:
2nd Edition 2017-2018
80 Suffolk Court, Hauppauge, NY 11788800.275.0020 β’ FAX: 631.434.7750Ph: 631.434.3190 β’ EMAIL: [email protected]
www.defend.com
I S A PROUD MEMBER OF
JOIN OSAP.ASAPThe Organization for Safety, Asepsis and Prevention (OSAP) is the worldβs leading advocate and trusted advisor for the safe and infection-free deliveryof oral health care.
The Safest Dental Visitβ’ is OSAPβs latest infection control educational program.As an authority on infection control, OSAP has developed this program to helpdental practices:
β’ Offer patients The Safest Dental Visitβ’ - elevating their conοΏ½dence in the practiceβ’ Engage staff in a βculture of safetyββ’ Enhance the overall image of the practice
Itβs Like Having an Infection Control Partner! Visit: www.osap.org
Our Brand Promise
βTo provide the healthcare professional with the highest
quality infection control products, disposables,
preventatives and impression material systems at
affordable prices, supported by Superior Service and 100%
Customer Satisfaction.β