ddf m1 submission

1

DIGITAL DESIGN + FABRICATION SM1, 2016 M1 JOURNAL - Party Whistle

Huang Sai(744632)

Joshua Russo-Batterham + Tute #4

2

Measured Drawings

Plan

Elevation

15 mm

10 mm

270 mm

330 mm

3

Measurement Process

Right

RuleR aRe used to meatuRe the size of the mounth piece. a small papeR stRipe is used to measuRe the inteRioR stRuctuRe of the mounthpiece.

as theRe aRe a lot of even folds on the papeR tube. taking photos and then imitation aRe the main stRategies of dawing this segament.

4

Analysis

PAPER TUBE + PAPER STICKER +

PLASTIC MOUTH PIECE

63 mm

285 mm

28 mm

the papeR tube woRks as the skin in the mateRial system. this kind of pateR is soft with no shape and foRm. theRe is a plastic coil stRipe to the papeR to give it stRength to change its foRms. so it is flatten and Rolled into a coil, and unRoll when blown in to.

the papeR stickeR aRe used to connect the papeR tube and plastic mouth piece. its stickiness help pRevent the aiR going out, and stRaight away let the aiR going into the tube.

the plastic mounth piece is used to pRoduce a hoRn-like noise.

5

Digital Modeling Process

6

Sketch Model

Plan View

Right View

Front View

Isometric View

7

Sketch Modeling Process

i got the inspiRation fRom the plastic stRip coil. so i cut some papeR stRips to be the bone of the system. i simulate the woRking pRinciple of the Rolled plastic stRip. afteR that, skin system aRe added in to enable the foRm vaRiation.

8

How does this respond to your personal space?

What is your idea? [Maximum 5 key words]

Sketch Design #1sitting sleeping bag

chaiRs aRe easiest to find in the campus. the device help you to have a good snap on any chaiR. the special mateRial makes it easy to change its shape inside. as the peRsonal space standaRds aRe diffeRent foR eveRyone. so it is totally useR fRiendly as you can make youR own peRsonal space foR a poweRful snap.Roll up when not been used to save space

pRovide pRivate sleeping aRea on a chaiR the shape can be change by the useR Randomly

9



Sketch Design #2tRansfoRmance flying chaiR

it is awkwaRd to just sleeping on a lying chaiR in the campus. you must desiRe something to sepaRate you fRom the suRoundings. this chaiR contains seveRal panels inside the handle. once you open the case, the Removable panels can be unfolded and connect the otheR side of the chaiR, which at the same time, cov-eRs the aReas you dont’t want to show to otheRs.

10

Sketch Design #3



poRtable desk egg-shell pillow

when you want to have a snap on a table, it’s usually embaRRassed to make otheRs looking at you when you aRe sleeping. so this device not only contains a comfoRtable pillow well suppoRts youR neck and head, bu also be able to hide youR entiRe head into the shell to pRevent distuRbeR

ddf m1 submission

Documents