DAKTRONICS · daktronics is not responsible for the main electrical disconnect. rev date: by: 01 29 may 13 updated power requirements kma daktronics, inc. the concepts expressed and
1
3' 2-13/16" [986] OVERALL HEIGHT 10' 10-7/8" [3325] OVERALL WIDTH 3-13/16" 97 [ ] 0" 0 [] 3' 8-5/8" 1134 [ ] 10' 7-1/8" 3228 [ ] 10' 10-7/8" 3325 [ ] 3-1/2" 89 [ ] 0" 0 [] 9-15/16" 253 [ ] 2' 11-5/16" 897 [ ] 3' 2-13/16" 986 [ ] 1' 11-7/8" 606 [ ] 0" 0 [] 8' 11-1/16" 2719 [ ] 10' 10-7/8" 3325 [ ] 6-3/4" 171 [ ] 0" 0 [] 8' 7-3/8" 2626 [ ] 10' 3/8" 3058 [ ] 10' 5-5/16" 3183 [ ] 10' 10-7/8" 3325 [ ] 11-1/4" 286 [ ] 0" 0 [] 1' 305 [ ] 9" 229 [ ] 8-1/8" [207] 4" [102] SEE INSTALL NOTE #8 11-1/8" [283] 8-1/8" [207] 11-5/16" [288] 8-5/16" [212] 2" [51] STANDARD 2-1/2" MAX 1" MIN 7' 2-1/4" 2191 [ ] 5' 5-7/16" 1662 [ ] # DETAIL DESCRIPTION 1 DISPLAY AF-3550-48 X 192-16MM 2 LED COLOR RGB 3 ACTIVE AREA 2' 7-7/16" [798] X 10' 4-13/16" [3170] 4 OVERALL SIZE 3' 2-13/16" [986] X 10' 10-7/8" [3325] 5 CABINET ALUMINUM, PAINTED SEMI-GLOSS BLACK 6 VENTILATION INTAKE & EXHAUST AT BOTTOM-FRONT 7 ACCESS SERVICE FROM FRONT ONLY 8 WEIGHT 290 LBS [132 KG] (APPROX) 9 SHIPPING SHIPPED & INSTALLED AS SINGLE UNIT 10 DIMENSIONS FEET AND INCHES [MILLIMETERS] STRUCTURAL RATING 1 DESIGN WIND PRESSURE "P" P<=110 PSF 2 STANDARD/CODE IBC 2006 POWER RATINGS PER SINGLE FACE # COLOR EFFECTIVE DATE WATTS DOMESTIC INTERNATIONAL 120VAC,60Hz 2 WIRE + GND 120/240VAC, 60Hz, 3WIRE + GND 240VAC,1PH 50Hz 2WIRE + GND LINE 1 (AMPS) LINE 1 (AMPS) LINE 2 (AMPS) LINE 1 (AMPS) 1 RGB AFTER 4/26/12 1410 N/A 4.77 6.98 5.87 2 RGB PRIOR TO 4/25/12 1804 N/A 6.26 8.78 7.52 INSTALL NOTES 1 DISPLAY IS FRONT VENTILATED SO NO PORTION OF THE FRONT FACE CAN BE COVERED. AIR INTAKES ARE FILTERED. FILTERS ARE LOCATED IN DRAWERS ON FACE AND WILL NEED TO BE PERIODICALLY CLEANED TO ENSURE PROPER VENTILATION. REFER TO MAINTENANCE DOCUMENT (DD-1564079) FOR FILTER MAINTENANCE INSTRUCTIONS. 2 IN ORDER TO MAINTAIN THE STRUCTURAL INTEGRITY OF THE DISPLAY CABINET, USE SPREADER BEAM AND MAINTAIN A 90° ANGLE BETWEEN THE CABINET AND THE LIFTING METHOD. ALL EYEBOLTS MUST BE USED FOR LIFTING THE CABINET. 3 1/2" EYEBOLTS TO ASSIST WITH DISPLAY INSTALLATION. EYEBOLTS MAY BE REMOVED AFTER INSTALLATION. 4 EYEBOLTS MAY NOT BE USED FOR PERMANENT INSTALLATION. 5 L3X3X3/8" X3 WIDE" ASTM A36 STEEL ANGLE FOR MOUNTING ATTACHED TO THE DISPLAY WITH 1/2" BOLT AND NUT INSERT. CLIP ANGLE CAN BE ADJUSTED VERTICALLY AS NEEDED DURING INSTALLATION. 6 DAKTRONICS IS NOT RESPONSIBLE FOR THE MOUNTING HARDWARE OR THE INTEGRITY OF THE STRUCTURE TO WHICH THE DISPLAY IS MOUNTED TO. 7 EXTERNAL JUNCTION BOX IS PROVIDED FOR POWER TERMINATION. SEE POWER RATINGS ABOVE. 8 SIGNAL INPUT AT QUICK CONNECT. PRIMARY/SINGLE FACE DISPLAY SHOWN. SEE CLEARANCE DIMENSION ON DETAIL VIEW B. 9 SIGNAL OUTPUT QUICK CONNECT FOR MIRROR FACE. 10 GROUND LUG FOR GROUND LUG CONNECTION. DISPLAY NEEDS TO BE GROUNDED. 11 TWO 1/2" CONDUIT KNOCKOUT LOCATIONS FOR OPTIONAL SIGNAL ENTRANCE 12 DAKTRONICS IS NOT RESPONSIBLE FOR THE MAIN ELECTRICAL DISCONNECT. REV DATE: BY: 01 29 MAY 13 UPDATED POWER REQUIREMENTS KMA DAKTRONICS, INC. THE CONCEPTS EXPRESSED AND DETAILS SHOWN ON THIS DRAWING ARE CONFIDENTIAL AND PROPRIETARY. DO NOT REPRODUCE BY ANY MEANS WITHOUT THE EXPRESSED WRITTEN CONSENT OF DAKTRONICS, INC. COPYRIGHT 2013 DAKTRONICS, INC. BROOKINGS, SD 57006 DO NOT SCALE DRAWING PROJ: GALAXY AF-3550 16MM DISPLAYS TITLE: SHOP DWG, AF-3550-48X192-16 DESIGN: TWHITEH DRAWN: RBJERKE DATE: 29-MAY-13 SCALE: 1=40 SHEET: REV JOB NO: FUNC-TYPE-SIZE 1058991 1 OF 1 01 P 1569 E - 10 - B DAKTRONICS LIGHT SENSOR (DO NOT BLOCK) ACTIVE AREA SIZE (2' 7-7/16" [798]) X (10' 4-13/16" [3170]) SEE INSTALL NOTE #1. FRONT VIEW GROUND LUG SEE INSTALL NOTE #10 SIGNAL OUTPUT SEE INSTALL NOTE #9 SEE INSTALL NOTE #2, #3, & #4 POWER ENTRANCE SEE INSTALL NOTE #7 OPTIONAL SIGNAL ENTRANCE SEE INSTALL NOTE #11. SIGNAL INPUT QUICK CONNECT SEE INSTALL NOTE #8 REAR VIEW TOP VIEW SEE DETAIL A SEE DETAIL B RIGHT VIEW DETAIL A SCALE 1/10 ADJUSTABLE CLIP ANGLE SEE INSTALL NOTE #5 DETAIL B SCALE 1/10 SUBMITTAL APPROVAL COMPANY: SIGNED: TITLE: APPROVED APPROVED AS NOTED APPROVED AS NOTED & RESUBMIT DATE:
