cyclone data sheet

■ De signed to s eparate product f rom an air stream ■ Compl y wi th NESH AP hea vy metal emissions ■ Up t o 99.99% ef ci ency ■ No moving parts or maintenance ■ Wide ra nge of cyclo nes for dust collection or product receiving ■ Pa rt of the ProPulse® portfol io of industrial air ltration products Cycl one Collectors Ap pl ic ati on : Cyclones are capable of handling very heavy dust loads, and are very good spark arrestors. Because cyclones are easy to wash down and sanitize, the risk of cross contamination is minimized. Cyclones are more efcient on particulate 50 mi - cron and larger. Used in applications, such as: ■ Human/pet food where high moisture and high fat content are commonly used in equipment congurations that include dryers and coolers, coating drums for avors, centri - fuge exhausts, and extruder negative lift applications. ■ Areas where the potential for re is high such as wood sanders, direct red driers, cabinet and furniture manufac- turing, coffee and grain roasters, wood and hay grinding operations. ■ Pre-separators for material that may not be suited to collect directly in a baghouse such as paper trim, bufng dust, bio- mass from land ll products, and wood chips. ■ Reducing loading into a baghouse so that a high entry inlet may be used to reduce interstitial velocity and protect product from degradation. Operating Principl e Standard efciencies have relatively low differential pressure – 3”-7” W .C. Adding expansion chambers increases efciency . The higher the pressure drop, the more efcient the cyclone. BV-D5082GB H Cyclone H Cyclone was designed to efficiently handle large air volumes economical ly . It is often used as a primary pre-collector in a dust collection system or as a product receiver . This is the la rgest cyclone receiver Mac Process offers with airflow ranging from 6,000 to 71,000 CFM. High Efciency (HE) Cyclone The Mac Process HE Cyclone is most efficient as a pneumatic receiver for material separation of particles up to 20 mi crons. Pressure loss across collectors within the recommended CFM range is 3.25” W.C. or less. Inlet and outl et flanges can be drilled to mate existing or new equipment. For larger airflows - multiple collector units are available in “In-Line” arrangements of 2, 3 or 4 units. Multiple cycl one units include ducting to a common inlet and a common screw conveyor at cyclone discharge (drive package not included) . Airflows avai lalble from 2,188 - 50,400 CFM.

Upload: wong-zet

Post on 02-Jun-2018

215 views

Category:

Documents

0 download

Report

Download

Embed Size (px):

TRANSCRIPT

8/9/2019 Cyclone Data Sheet

http://slidepdf.com/reader/full/cyclone-data-sheet 1/2

■ Designed to separate product f roman air stream

■ Comply with NESHAP heavy metalemissions

■ Up to 99.99% ef ciency

■ No moving parts or maintenance

■ Wide range of cyclones for dustcollection or product receiving

■ Part of the ProPulse® portfol io ofindustrial air ltration products

Cyclone Collectors

Appl ication :Cyclones are capable of handling very heavy dust loads, andare very good spark arrestors. Because cyclones are easy towash down and sanitize, the risk of cross contamination isminimized. Cyclones are more ef cient on particulate 50 mi -cron and larger. Used in applications, such as:

■ Human/pet food where high moisture and high fat contentare commonly used in equipment con gurations that in -clude dryers and coolers, coating drums for avors, centri -fuge exhausts, and extruder negative lift applications.

■ Areas where the potential for re is high such as woodsanders, direct red driers, cabinet and furniture manufac -

turing, coffee and grain roasters, wood and hay grindingoperations. ■ Pre-separators for material that may not be suited to collect

directly in a baghouse such as paper trim, buf ng dust, bio-mass from land ll products, and wood chips.

■ Reducing loading into a baghouse so that a high entry inletmay be used to reduce interstitial velocity and protect prod-uct from degradation.

Operating Principl eStandard ef ciencies have relatively low differential pressure –3”-7” W.C. Adding expansion chambers increases ef ciency.The higher the pressure drop, the more ef cient the cyclone.

BV-D5082GB

H CycloneH Cyclone was designed to efficiently handle largeair volumes economically. It is often used as aprimary pre-collector in a dust collection system oras a product receiver. This is the largest cyclonereceiver Mac Process offers with airflow rangingfrom 6,000 to 71,000 CFM.

High Ef ciency (HE) CycloneThe Mac Process HE Cyclone is most efficient as apneumatic receiver for material separation of particlesup to 20 microns. Pressure loss across collectorswithin the recommended CFM range is 3.25” W.C.or less. Inlet and outlet flanges can be drilled tomate existing or new equipment. For larger airflomultiple collector units are available in “In-Line”arrangements of 2, 3 or 4 units. Multiple cycloneunits include ducting to a common inlet and acommon screw conveyor at cyclone discharge(drive package not included). Airflows availalble from2,188 - 50,400 CFM.

8/9/2019 Cyclone Data Sheet

http://slidepdf.com/reader/full/cyclone-data-sheet 2/2

Mac Process7901 NW 107th TerraceKansas City, MO 64153888-657-3098E-mail: [email protected] site: www.macprocessinc.com

Ultra HE CycloneOffers up to 99.99% ef ciency, and its performance is guaranteed. Each system is designed and manufactured tomeet the unique ef ciency needs of your application. The UHE can be con gured as a clean-in-place system. Typi -cal applications include but are not limited to: Pharmaceutical, Fluid Bed Dryer Exhaust, Food and Wood. Ultra highef ciency models will have high differential pressure – 10”-15” W.C.

CT CyclonePrimarily used as a pneumatic receiver and in plastic pellet de-dusting. Multiple inlet sizes accommodate appropriate

convey line size. An expansion chamber can be added for higher ef ciency. Available in sizes from 13” to 68” andair ows from 120 CFM – 8,000 CFM.

HECR CycloneUsed to collect product out of an air stream. This collector was designed for use with powders and is available inaluminum, stainless steel and carbon steel.

Fan Powered CycloneFPC is a high efficiency centrifugal collector with a deep body and long cone. The FPC is an economical solutionfor a wide range of dust collection applications, including woodworking, metal grinding, buffing, etc. The FPC canalso be used on operations that create sparks.

Cyclone FPGA Family Data Sheet - Altera · PDF fileDirect link interconnect from adjacent block Direct link interconnect to adjacent block Row Interconnect ... Cyclone FPGA Family

Cyclone II Device Family Data Sheet, Cyclone II Device ...users.ece.gatech.edu/hamblen/DE2/Datasheets/Cyclone_II/cyc2_cii5v1...Altera Corporation Section I–1 Preliminary Section

Cyclone II Device Handbook, Chapter 2. Cyclone II Architecturecourses/ee8205/Data-Sheets/sopc/cyc2... · Chapter 2. Cyclone II ... Cyclone II Device Handbook, ... design processing,

Tropical Cyclone Modeling and Data Assimilation

Section I. Cyclone FPGA Family Data Sheet - Digi-Key Sheets/Altera PDFs/Cyclone_FPGA... · Altera Corporation Section I–1 Preliminary Section I. Cyclone FPGA Family Data Sheet This

Polar Cyclone Identification from 4D Climate Data in a

Tropical Cyclone Mesoscale Data Assimilation

Cyclone II Device Family Data Sheet, Cyclone II Device ...hamblen.ece.gatech.edu/DE2/Datasheets/Cyclone_II/cyc2_cii5v1_01.pdf · Section I–2 Altera Corporation Preliminary Cyclone

Cyclone FPGA Family Data Sheet - intel.com · 6 Altera Corporation Cyclone FPGA Family Data Sheet Preliminary Information Logic Array Blocks Each LAB consists of 10 LEs, LE carry

Process Sheet for Cyclone Welded 573329-80. Small

Cyclone Device Handbook, Volume 1, Section I. Cyclone FPGA Family Data Sheet · 2014-01-13 · 33-MHz, 64- and 32-bit peripheral component interconnect (PCI), for interfacing with

Ensemble Tropical Cyclone Activity Prediction using TIGGE data