curriculum vitae · curriculum vitae education 1. phd automotive engineering, 2011, universiti...
TRANSCRIPT
1
Updated on 8.2.2015
CURRICULUM VITAE
Education
1. PhD Automotive Engineering, 2011, Universiti Putra Malaysia, MALAYSIA
2. M Eng Electrical Engineering, 2001, Universiti Teknologi Malaysia.MALAYSIA
3. B Eng Electrical and Electronic Engineering, 1998, University of Porstmouth, UNITED KINGDOM
4. Diploma Electrical and Electronic Engineering, 1995, Institut Teknologi Mara, Shah Alam
Areas of Interest
1. Control system, System Identification and Automotive Electronic Control
Professional Qualification/ Membership/ Affiliation
1. 2014 Professional Engineer Electronic Board of Engineer Malaysia
Membership/ Affiliation
1. Member, Society of Automotive Engineering: 611339404
2. Member, Malaysia Society of Engineering & Technology (mSET) :00751
3. Member , Institute of Electrical and Electronics Engineers (IEEE): 80260879
4. Member, International Association of Engineer (IAENG): 115244
5. Senior Member, Science and Engineering Institute (SCIEI) :0060
6. Graduate Member, Board of Engineers Malaysia (BEM): 35786A
7. Member, The Institute of Engineers, Malaysia (IEM) :48508
8. Persatuan PEgawai Akademik UPM, 2004
Appointment
1. Senior Lecturer, Department of Electrical and Electronic Engineering Faculty of
Engineering, UPM
1/2008 to date
2. Associate Researcher, Centre of Advanced Power and Energy Research (CAPER),
Faculty of Engineering, UPM
3. Academic Researcher, PROTON Professor Office, Engineering Division Perusahaan
Otomobil National Sdn Bhd.(Malaysian automobile manufacturer)
4. Associate Researcher, Institute of Advanced Technology (ITMA), UPM
5. Lecturer, Department of Electrical and Electronic Engineering Faculty of Engineering,
UPM
6. Tutor, Department of Electrical and Electronic Engineering Faculty of Engineering,
UPM
7/2014-7/2017
2/2012- 2/2013
2013-2016
7/2001- 12/2007
5/1999- 6/2001
Appointment-Managerial Duties
1. Department of Electrical and Electronic Eng, Development’s Coordinator
2. Head of Control and Automation Laboratory
3. Final Year Project Coordinator
4. Head of Control Unit, Dept.Of Electrical and Electronic Engineering
5. Program Coordinator: UNITI College-UPM : for Bachelor Program in Electrical and
Electronic
6. Felo of College 14, Universiti Putra Malaysia
9/2014-to date
2013-to date
2013-to date
2008-2011
2002-2003
2003-2005
Ir. Dr Mohd Khair Hassan Department of Electrical and Electronic Engineering, Faculty of Engineering, Universiti Putra Malaysia, 43400 UPM Serdang, Selangor [email protected] T: 03-8946 4367 F: 03-8768 6327
2
Updated on 8.2.2015
List of Subjects Tought
1. EEE 3001: Electrical and Electronic Technology
2. EEE 3401 : Control System
3. EEE 4403 : Advanced Control System Design
4. EEE 4404 : Intelligent Control System
5. EEE 4405 : Embedded Control System
6. EEE 5999 : Advanced Modelling and Simulation
Year 2
Year 3
Year 4/MSc
Year 4/MSc
Year 4/MSc
MSc/ PhD
Journal Publications
1. Ameer Sedera, Mohd Khair Hassan,Mohd Amran Bin Mohd Radzi and SF Tohad, Mathematical Design and
Analysis of Anti-Lock Brake System for Electric Vehicle Based On Brake-By-Wire Technology, International
Journal of Electric and Hybrid Vehicles; 2014 (Published) (SCOPUS)
2. Mohd Hafiz Mohd Nordin, Mohd Khair Hassan, Azura Che Soh, Mohd Amran Mohd Radzi, Hardware-In-Loop
of Fault Detection system for Air-Fuel Ratio Control ,Applied Mechanics and Materials Vol. 663 (2014) pp 233-
237. (SCOPUS)
3. Nor Aziah Mohd Azubir, Mohd Khair Hassan, Hairi Zamzuri, Saiful Amri Mazlan, Development of PROTON
Electric Vehicle Control Unit (eVCU) using State Machine Deterministic Rule-Based Approach Applied
Mechanics and Materials Vol. 663 (2014) pp 532-538 (SCOPUS)
4. Siti Fauziah Toha, Nor Hazima Faeza,Nor Aziah Mohd. Azubair, Nizam Hanis, Mohd. Khair Hassan, Babul
Salam KSM Ibrahim,Lithium Iron Phosphate Intelligent SOC Prediction for Efficient Electric
Vehicle, Advanced Materials Research Vols. 875-877 (2014) pp 1613-1618. (SCOPUS)
5. Seyed Mohammad Hussein S, Siti A. Ahmad, Azura Che Soh, Mohd K Hassan, Asnor J Ishak.The Combined
Statistical Minimized Point Distance (SMPD) and Texture Based Image Processing Techniques and Their
Applications in Plant Species Recognition. Submitted to IET Image Processing. 2014. (ISI Indexed)
6. Ahmed Abdulelah, Azura Che Soh,MohdKhair Hassan and SamsulBahariMohd Noor. Controlling the Pitch and
Yaw Angles of Twin Rotor MIMO System in Simulation Based Platform using Fuzzy Logic. Open Journal of
Artificial Intelligence , OJAI 2014, (1):1-6 (DOI:10.12966/ojai.02.01.2014)
7. Mohammed Ahmed, Samsul Bahari B Mohd Noor, Mohd Khair B Hassan, Azura Bt Che Soh. A Review of
Strategies for Parabolic Antenna Control, Australian Journal of Basic and Applied Sciences, 8(7) May 2014,
Pages: 135-148. (SCOPUS)
8. Nor Hafeezah Kamarudin, Siti Anom Ahmad, Mohd Khair Hassan, Rosnah Mohd Yusuff,Siti Zawiah Md
Dawal: A Review of the NIOSH Lifting Equation and Ergonomics Analysis, Advanced Engineering Forum Vol.
10 (2013) pp 214-219. (DOI:10.4028/www.scientific.net/AEF.10.214) (SCOPUS)
9. Seyed Mohammad Hussein S, Siti A. Ahmad , Azura Che Soh, Mohd K Hassan, Asnor J Ishak Introducing New
Statistical Shape Based and Texture Feature Extraction Methods in The Plant Species Recognition System.
International Journal of Engineering and Technology, Vol.10, No. 2, 56–61, 2013
10. M.Seifi, A.che Soh, N.I.Abd.Wahab, M.K.Hassan, A Comparative Study of PV Models with Matlab/Simulink,
World Academy of Science, Engineering and Technology 74 2013, pp 108-113
11. M.Seifi, A.che Soh, N.I.Abd.Wahab, M.K.Hassan, Modeling of PV Standalone Microgrid Based on IEEE 1562-
2007,1361-2003 and 1013-2007. International Review on Modeling and Simulations (I.R.E.M.O.S), vol 6,N2,
2013 pp 515-525. (SCOPUS)
3
Updated on 8.2.2015
12. M.K Hassan, N.A.M. Azubir, Nizam.H.M.I, S.F Toha, B.S.K.K Ibrahim , Optimal Design of Electric Power
Assisted Steering System (EPAS) Using GA-PID Method , Procedia Engineering 41 (2012) 614-621. (SCOPUS).
13. B.S.K.K.Ibrahim, N.Aziah.M.A, S. Ahmad, R. Akmeliawati, Nizam H.M.I,A.G.A.Muthalif, S.F.Toha and
M.K.Hassan, Fuzzy-based Temperature and Humidity Control for HVAC of Electric Vehicle, Procedia
Engineering 41 ( 2012 ) 904 – 910. (SCOPUS).
14. Mohd Khair Hassan and Ishak Aris, Modeling brake torque of CNGDI using two stage regression technique ,
International Review of Mechanical Engineering (2012) Vol. 6 n. 3, pp. 621-624 (SCOPUS)
15. Mohd Azubir N.A, Md.Idris N.H, Ahmad S, Akmal R.A, Toha S.F, Ibrahim B.S.K.K , Hassan M.K. Development
of Control Strategy on Segregation of HVAC Energy Efficiency as Non Propulsion Electrical Hotel Load in EV.
Journal of Engineering. Vol 4. Pg 14-20. 2012
16. Mohd Khair. H, Aishawarya.K, Ribhan Zafira A.R and Siti Anom.A, Design a PID Controller for a Constant
Speed of Combustion Engine, Australian Journal of Basic and Applied Sciences, 5(12): 1586-1593, 2011
(SCOPUS).
17. M.K. Hassan, R.Z. Abdul Rahman, A,Che Soh, M.Z.Z Ab Kadir, Lightning Strike Mapping for Peninsular
Malaysia Using Artificial Intelligence Techniques. Journal of Theoretical and Applied Information Technology
(JATIT) 34(2), 2011, 202-214. (SCOPUS).
18. Azura Che Soh, Mohd Khair Hassan, Ribhan Zafira Abdul Rahman, A Fuzzy Classificier System for Malfuntion
Traffic Light System Classification, Journal of Theoretical and Applied Information Technology (JATIT) 34(2),
2011, 226-240. (SCOPUS).
19. M.K. Hassan, R.Z. Abdul Rahman, A,Che Soh, M.Z.Z Ab Kadir, Lightning Strike Mapping for Peninsular
Malaysia Using Artificial Intelligence Techniques. Journal of Theoretical and Applied Information Technology
(JATIT) 34(2), 2011, 202-214. (SCOPUS).
20. Mohd.Khair, H and Ishak, .A. The Effect of the Ignition Dwell Time at Constant Speed for CNGDI Engine,
Australian Journal of Basic and Applied Sciences, 4(10): 4691-4694, 2010 (SCOPUS).
21. M.K Hassan, I.Aris, S.Mahmod, R. Sidek , Influence of injection and ignition of CNG fuelled direct injection
engine at constant speed, Australian Journal of Basic Applied Science, 4(10): 4870-4879, 2010, ISSN 1991-
8178, 2010. (SCOPUS).
22. M.A Kalam, H.H MAsjuki, M Redzuan, T.I. Mahlia, M.A Fuad, M Mohibbah, K.H. Halim, A.Ishak, M.Khair,
A.Shahrir and A.Yusoff. Development and Test of a New Catalytic Converter for Natural Gas
Fueled Engine, International journal of Sadhana Acedemy Proceedings in Engineering Science, 560-580, 2009 –
ISI/SCI (SCOPUS).
23. Mohd.Khair Hassan, Ishak Aris, Khairul Nizam Zainuddin and Nik Anis Alina, Torque and Power of CNGDI
Engine with Two Different Piston Crown Shapes, Journal of Applied Sciences Research 5(8): 949-954, 2009.
24. M.K Hassan, I.Aris, S.Mahmod, R. Sidek An experimental result of exhaust emission concentration relative to
various injection timing of CNG fuelled direct injection engine. European Journal of Scientific Research, ISSN
1450-216X Vol.25 No.3 (2009), pp.405-416.
25. Wan Zuha A.H.,Zulkifli A.R., Samsul B.M.N, M.Khair H., Liakot A. and Syed A.R, Doppler Effect Method For
Speed Trap Detector. Journal of Industrial Technology Vol.14 (2) 2005, 97-111.
26. M.K Hassan, A. Mustaffa and Norhayati , A Comphehensive GUI with MATLAB Based for Classical, Modern
and Electric Circuit Analysis, Engineering Transactions, Mahanakorn University of Technology, Vol 7, No 1(16),
Jan-June 2004, 57-75.
27. Azura Che Soh, Mohd Khair Hassan, Mohd Amran Mohd Radzi and Li Hong Fay, Development Of Fuzzy Logic
Controller For Movement Control Of Robotic System, Journal of Industrial Technology Vol.14 (2) 2005, 113-137.
4
Updated on 8.2.2015
28. I Aris, M.K. Hassan, I.Mat, K.Nizam,N.A.Alina,R.K.Zakiah,R.Sidek, S.Mahmood, Model-Driven Electronic
Control Unit with Real-Time Embedded Target, Engineering Transactions, Mahanakorn University of
Technology, Thailand.,Vol.8,No.1(18),Jan-June 2005, 62-80.
29. Ibrahim Mat, Ishak Aris, Mohd Khair, Roslina Mohd. Sidek, , Nik Anis Alina and Syed Malik, Electronic
Control Unit for Vehicles:Issues and the Way Forwards, Journal of Industrial Technology, SIRIM Berhad. Vol.15
(1) 2006, 73-85.
30. Mohd Liakot Ali, Mohd Khair Hassan, Wan Zuha Wan Hasan and Tan Yar Loon, Systhesis of 8-bit smart Card
Microprocessor Using Harvard Architecture and RISC, Journal of Industrial Technology , Vol 14 (1) 2005, 37-
58.
Conference Proceedings
1. M.K Hassan, S.F Toha, B.S.K.K Ibrahim, N.Aziah .M.A, Power Consumption Efficiency of Electric Power
Assisting Steering System for Electric Vehicle: MBD Approach. 2nd International Symposium on Applied
Engineering and Sciences (SAES2014),Kyushu Institute of Technology 20th – 21th Dec. 2014.
2. T. A. T. Mohd, M. K. Hassan, and WMK. A. Aziz, Mathematical Modeling and Simulation of Electric Vehicle
using MATLAB-Simulink, International Conference on Automotive Innovation and Green Energy Vehicle
(AiGEV 2014), August 26-27, 2014 Kuantan, Pahang, Malaysia.
3. Mohammad Seifi, Azura Che Soh, Mohd Khair Hassan and Noor Izzri Abd. Wahab. An Innovative Demand Side
Management for Vulnerable Hybrid Microgrid. 2014 IEEE Innovative Smart Grid Technologies Conference- Asia
(ISGT ASIA), 20-23 May 2014, Kuala Lumpur, Malaysia.
4. Maged S.Saeed, Asnor J. Ishak, Siti A.Ahmad, Mohd K. Hassan, Design A Low Cost Electromyography Amplifier
Circuit. 1st Mini Symposium on Artificial Intelligence and Robotics, Kuala Lumpur, Malaysia,11 December 2013.
5. M.Azhar Omar, M.Khair Hassan, Azura Che Soh, M.Z.A.Ab.Kadir. Lightning Severity Classification Utilising
the Meteorological Parameters: A Neural Network Approach. 2013 IEEE International conference on Control
System, Computing and Engineering, 29 Nov-1 Dec, 2013, Penang Malaysia.
6. Chow Kar Kit, Azura Che Soh, Umi Kalsom Mohammad Yusuf , Asnor Juraiza Ishak,Mohd Khair Hassan and
Shamsul Khamis. E-Nose Herbs Recognition System based on Artificial Neural Network Technique. The 2013
IEEE International Conference on Control System, Computing and Engineering, 29 Nov - 1 Dec 2013, Penang,
Malaysia.
7. M.K Hassan, N.Aziah .M.A, Nizam.H.M.I, A.G A Mutalib, S.F Toha, B.S.K.K Ibrahim. A Comparative Study of
Power Consumption of Electric Power Steering System, 180-184, 2012 IEEE International Conference on Power
and Energy (PECon), 2-5 December 2012, Kota Kinabalu Sabah.
8. N. Aziah M.A, Nizam H.M.I, S. Ahmad, R.Akmeliawati , S. F. Toha, B.S.K.K. Ibrahim, M.K. Hassan, Control
Strategy of Segregation on HVAC Energy Efficiency as Non Propulsion Electrical Hotel Load in EV , 593-597, ,
2012 IEEE International Conference on Power and Energy (PECon), 2-5 December 2012, Kota Kinabalu Sabah.
9. B.S.K.K. Ibrahim, N.A.M. Azubir, N.H.M. Ishak, M.K. Hassan, S.F. Toha, M.A.Z. Abidin, H.F. Ismail and H.
Zamzuri. PI-Fuzzy Logic Control for 3 Phase BLDC Motor for Electric Vehicle Application. Conference of 2012
UKSim-AMSS 6th European Modelling Symposium
10. Mohd Khair Hassan , Ishak Aris, Modeling Brake Torque of CNGDI Engine Using Two-Stage Regression
Technique. Regional Conference on Automotive Research (ReCAR) 2011, 14-15th December 2011. Kuala
Lumpur, Malaysia
11. Mohd Khair Hassan , Ishak Aris, Roslina Sidek and Senan Mahmod Power and torque comparison FOR CNG
and Petrol Using LES software.World Engineering Congress 2010, 2nd – 5th August 2010, Kuching, Sarawak,
Malaysia Conference on Engineering and Technology Education.
5
Updated on 8.2.2015
12. M.K Hassan, I.Aris, S.Mahmod and R. Sidek, Exhaust gas concentration of CNG fuelled direct injection engine
at MBT timing, International Advanced of Technology Congress, 2009, PWTC, Kuala Lumpur, 3-5 November
2009.
13. M.A. Kalam, H.H. Masjuki, M. Redzuan, T.M.I. Mahlia, M. A. Fuad, M. Mohibah, Ku. Halim, A.Ishak and
M.Khair, A.Shahrir and A.Yusoff, Experimental Test of a New Compressed Natural Gas Engine With Direct
Injection, SAE paper no. 2009-01-1967, USA.
14. M.A. Kalam, H.H. Masjuki, M. Redzuan, T.M.I. Mahlia, M. A. Fuad, M. Mohibah, Ku. Halim, A.Ishak and
M.Khair, A.Shahrir and A.Yusoff, Development and Test of a New Catalytic Converetr for Natural Gas Fueeld
Engine, SAE paper no: 2008-01-1550,USA.
15. M.K Hassan, I.Aris, S.Mahmod, R. Sidek, K.N. Zainuddin, N.A.Alina, H.H Masjuki, M. Redzuan,
M.A.Kalam,The Influence of Fuel Injection Timing Towards Exhaust Emissions in Compressed Natural Gas
Direct Injection (CNGDI) Engine-An Experimental Study, 3rd Brunei International Conference on Engineering and
Technology, BICET2008, 3-4 Nov.2008
16. M.K Hassan, I.Aris, S.Mahmod, R.Sidek, K.N. Zainudin, N.A.Alina, H.H. Masjuki, M.Redzwan, M.A. Kalam,
The Effects of Ignition and Injection Timings On Compressed Natural Gas Direct Injection (CNGDI) Multicylinder
Engine, 1st Engineering Conference, Energy and Environment, 27-28 December 2007, Kuching Sarawak.
17. I.Aris, M.K Hassan, S.Mahmod, R.Sidek, K.N. Zainudin, N.A.Alina, H.H. Masjuki, M.Redzwan, M.A. Kalam,
Experimental Test and Simulation of Compressed Natural Gas Direct Injection (CNGDI) Single cylinder Engine,
1st Engineering Conference, Energy and Environment, 27-28 December 2007, Kuching Sarawak.
18. Mohd Khair Hassan, Ishak Aris, Jasronita Jasni, Senan Mahmod, roslina Sidek, Hashim Hizam, Comparative
Study of The Potential of Campro 1.6L Engine Fuelled by Compressed Natural Gas, World Engineering Congress
2007 (WEC 2007), 5-9 August, Penang, Malaysia.
19. Mohd Khair Hassan, Ishak Aris,K.N. Zainuddin, H.H Masjuki , M. Redzuan, M.A.Kalam Performance Analysis
Of 1.6l Campro Engine Using Motec And OEM Engine Control Unit, Proc.of the 2nd International Engineering
Convention 2007 (IntEC2007), 9-14 Mac 2007. Jeddah, Arab Saudi.
20. I.Aris, M.K. Hassan, R.Sidek, S.Mahmod, I.Mat, K.N.Zainuddin, N.A.Othman, R.K.Z.Sahbudin. Trend in
Electronic Control Unit Development With Real-Time Embedded Target, Proc. Of the Brunei International
Conference of Engineering and Technology (BICET) 2005, Brunei Darussalam, 15-18 August 2005.
21. Mohd Khair Hassan, Ishak Aris, Roslina Sidek, Senan Mahmod, Model-Based Approach with Real Time
Embedded Target for Rapid ECU Development: An Overview, Proceeding of the Jordan International of Electrical
and Electronic Engineering Conference (JIEEEC) 2005,15-17 Nov,2005. Amman, Jordan.
22. Khairul Nizam, Mohd Khair Hassan, Ishak Aris, Ibrahim Mat, Nik Anis Alina, Issues and Challenges of ECU
Development, RENTAS Symposium 2004, 24-25 Nov 2004, Faculty. Of Engineering. UPM.
23. Ishak Aris, Maaspaliza Azri, Zainab Hasan, M. K. Hassan, M. Khalid, S. M. Amin and H. A. Cyril, “Development
of Software System for Detecting Defective Symbols on Integrated Circuit Chip with Adjustable Readability
Level”, CD Proceeding of the 9th International Conference on Mechatronics Technology (ICMT), Kuala Lumpur,
5-8 December 2005.
24. Azura C. S., M.K. Hassan, Li Hong Fey, Intelligent Movement Control For Robots Using Fuzzy Logic,
International Conference Artificial Intelligence in Engineering and Technology (ICAET 2004), 3-5 Aug. 2004,
Sabah ,Malaysia.
25. Mohd Khair Hassan, Khairul Nizam Zainuddin, Development Of Control Strategy Of Ecu For CNG–Di Engine
, CNG-DI and Transmission Workshop, 21-23 Dec 2004, Hotel Equtorial, Melaka.
6
Updated on 8.2.2015
26. Mohd.Khair Hassan, Ribhan Zafira Abdul Rahman, Norhayati Hamid, Mohd Liakot Ali, Learning Aid for
Electric Circuits Analysis with MATLAB based GUI, Proceeding of The Seventh Triennial AEESEAP Conference,
Univ.Malaya.8,9 Dec 2003, pp 233.
27. Y.S.E.Ali, SBM Noor, S.M Bashi and M.K Hassan, Microcontroller Performance for DC Motor Speed Control,
National Power and Energy Conference, Equtorial, Bangi.2003
28. Ikmal Arif Abd. Jalal, Mohd Khair Hassan, Mohd Amrallah Mustafa, Smart Lighting Management System,
SCOReD 2003, Palm Garden Renaissance Hotel, Putrajaya. 25-26 August 2003.
29. Y.S.Ettomi, S.B.M.Noor, S.M.Bashi and M.K. Hassan, Microcrontroller Based Adjustable Closed-Loop DC
Motor Speed Controller, SCOReD 2003, Palm Garden Renaissance Hotel, Putrajaya. 25-26 August 2003
30. Zulkifli Abd Rahman, Wan Zuha Wan Hasan, Samsul Bahari, Mohd Khair Hassan, Doppler Effect Method For
Speed Trap Detector, SCOReD 2003, Palm Garden Renaissance Hotel, Putrajaya. 25-26 August 2003.
31. Mohd Khair Hassan, Syed Malik Faizal, EMS Applications and Components. Direct Injection Technology and
EMS Development Workshop, 23/9- 24/9/ 2003, Hotel Residence, Putrajaya, Malaysia
32. Mohd Khair Hassan, Samsul Bahari Mohd Noor, Brian Dyer, Mathematical Model Of Pontoon System, Proc of
World Engineering Congress 2002, 22-24 July 2002, Kuching Sarawak, Malaysia.
Books
1. National Occupational Skills Standard (NOSS), Instrumentation and Control: Level 3
(Contributor) - Department of Skill Development, Ministry of Human Resources, MALAYSIA. 2013
2. National Occupational Skills Standard (NOSS), Automotive Accessories and Customization; Level 3
(Contributor) - Department of Skill Development, Ministry of Human Resources, MALAYSIA. 2014
7
Updated on 8.2.2015
Research Grants- Principal Investigator
No Project Title Amount (RM) Year Funder
1 Formulation of Hybrid Artificial Intelligence Control of
Energy System for Electric Vehicle (EV)
147,000
On-going
2013-15 FRGS,MOSTI
2 Exploration on Hybrid Artificial Intelligence of
Model-Based Calibration Engine
63,000
Completed
2011-13 ERGS,MOSTI
3 Parameter Optimizations of CNG Fuelled Direct-
Injection Engine Using GT-Suite Simulation Package
30,000
Completed
2009-11 RUGS,UPM
4 Real Time Inverted Pendulum Controllers for SISO and
MIMO Analysis
10,000
Completed
2003-04 New Lecturer
Scheme,UPM
Research Grants- Co-Researcher
No Project Title Amount (RM) Year Funder
1 Parametric Modelling and Development of Battery Cell
Balancing for Energy Optimisation in Electric Vehicle
(EV)
201,500 2015-17 MOSTI- escience
Collaboration
with IIUM
2 Lightning Surges on Distribution Line and Its Effect on
Transformer Design and Protection
146,700 2015-17 GP-IPB,UPM
3 Nature-Inspired Parametric Analysis of Driver’s Spinal
Response to Steering Vibration Impact for Electric
Vehicle Steering System
50,000
On-going
2014-16 RACE-MOE
Collaboration
with IIUM
4 Development of ECU for MEEGE Multi-fuel Mixer for
Green Engine
329,600
On-going
2013-15 GP-IPB,UPM
5 Parametric Modelling and Intelligent Control for Vehicle
Electrical Loads (VEL) using Fuzzy logic control and
Particle Swarm Optimisation (FLC-PSO)-
50,000
On-going
2012-15 ERGS,MOSTI
Collaboration
with IIUM
6 Formulation of Algorithm to Classify Distinctive Odors
Pattern of Aromatic Plant Species using Hybrid Artificial
Intelligence Techniques
121,500
On-going
2013-15 FRGS,MOSTI
7 Development of A lifting Equation for Malaysia
population
15,000
On-going
2013-15 GP-IPS
8 The First Radio Quiet Zone(RQZ) Map for Radio
Astronomy in Malaysia
183,000 2013-14 ANGKASA &
MOSTI
Collaboration
with UM
9 An Intelligent Load Control System for Autonomous
Microgrid Based on Solar and Wind energy
14,300
Completed
2012-13 RUGS
10 Development of E-Nose Herbs Recognition System Based
on Artificial Intelligence Technique
63,000
On-going
2012-14 RUGS
11 Signal Processing Algorithm Development for Ultrasonic
Imaging in In-Vivo Skin Characterization-
94,000
On-going
2012-14 RUGS
12 Development of Signal Emulator and Calibration Tool for
Multifuel Electronic Control Unit of a Vehicle Power
Train
30,000
Completed
2009-11 RUGS
13 ROBOCON 2005 150,000
Completed
2005 UPM
14 Design and Construction of eye-safe laser range
finder/speed detector using 1550mm fiber laser.
146,500
Completed
2002-04 IRPA
15 Development of Hybrid-Control for Dynamic System- 117,000
Completed
2002-04 IRPA
16 CNG/DI Engine and Transmission: Development of
Electronic Control Unit and Its Diagnostic Kit
2,935,648
Completed
2002-07 IRPA
8
Updated on 8.2.2015
Patent
Title Reference
1. Ishak Aris, Khairul Nizam, Nik Anis Alina and Mohd Khair Hassan: Method for
Controlling Multiple-injection of Gaseous Fuel in a Direct Injection Engine.
PI20054808, 2005
Copyright
1. Mohd Khair Hassan, Muhammad Azhar Omar, Azura Che soh and Mohd Zainal Abidin Ab Kadir.
Lightning Severity Classification v.1.0- Copyrighted 18/8/2014, Malaysia Copyright Act 1987.
Awards/Recognition
Name of
awards
Title Award Authority Award Type Year
1
2.
Silver Medal
Excellent in
Service
Hardware-in-Loop (HiL) of
Fault Detection for Air-Fuel
Ratio Control
Principal Investigator
EYReC recognised as
Malaysia Invention & Design
Society (MINDS) at
International Engineering
Invention and Innovation
Exhibition (i-ENVEX).
April11th -13th 2014:
Universiti Malaysia Perlis
Universti Putra Malaysia
International 2014
2013
3. Excellent in
Teaching
Excellent in Teaching Faculty of Engineering University 2013, 2012
2011, 2010,
2009, 2004
4. Gold Medal Electronic Control Unit (ECU)
for Compressed Natural Gas
Direct Injection (CNGDI)
Vehicle Researcher
Malaysia Technology Expo
2008, 21-23 February 2008.
National 2008
5. Gold Medal Software system for detecting
defective symbols on
microchip with adjustable
readability level. Researcher
International Exhibition of
Ideas-Inventions-New
Products (IENA) 2007,
Nuremberg, Germany, 1st. –
4th November, 2007.
International 2007
6 Gold Medal Software System for Detecting
Defective Symbols on Micro
Chip with Adjustable
Readability Level Researcher
18th International Invention,
Innovation & Technology
Exhibition (ITEX 2007), 18-
20 May 2007 Kuala Lumpur,
Malaysia.
International 2007
7 Silver Medal New Electronic Control Unit
Control Strategy for
Compressed Natural as Direct
Injection Vehicle- Researcher
Pameran Rekacipta
dan,Penyelidikan dan
Inovasi, UPM
Universiti 2007
9
Updated on 8.2.2015
8 Special
Awards
from
Russian
Government,
Software System for Detecting
Defective Symbols on Micro
Chip with Adjustable 7
Readability Level.
Researcher
18th International Invention,
and Innovation &
Technology Exhibition
(ITEX 2007), 18-20 May
2007 Kuala Lumpur,
Malaysia.
International 2007
9 Bronze
Medal
Software System for Detecting
Defective Symbols on Micro
Chip with Adjustable
Readability Level:
Researcher
Pameran Rekacipta
dan,Penyelidikan dan
Inovasi, UPM
Universiti 2006
10 Gold Medal Compressed Natural Gas
Direct Injection Vehicle
(CNGDI) Researcher
17th International Invention,
Innovation, Industrial Design
and Technology Exhibition
(ITEX 06), 19-21 May 2006
Kuala Lumpur, Malaysia.
International 2006
13 Best Design ROBOCON Researcher National ROBOT
Competition 2005, 22-23
April 2005, MOHE
ROBOCON 2005
National 2005
10
Updated on 8.2.2015
Consultancy
No Year Title Authority
1 2014 Hardware-in-loop (Hil) for control system
development : commissioning and
applications– Technical Consultant
EZ Solution Enterprise. Technical
seminar conducted for UPNM
lecturers
2 2013 Development of Curriculum (COCU) Level 4 for
Instrumentation and Control System- Expert
Consultant
Adimega Sdn Bhd- appointed
consultant company by Ministry of
Human Resources, Malaysia for the
development of COCU Level 3
Instrument and control System
3 Nov,
2013
CNGDI Engine- ECU operation and
recalibration- Technical Consultant
Hakita Engineering Sdn Bhd
4 2010 ECU and harness development -Technical
Consultant
CAR (Centre for Automotive
Research), Faculty of Engineering
and Built Environment, The National
University of Malaysia
Professional Services
No Title Authority/Funding Designation
1 Panel Penilai, POLITEKNIK Kurikulum
Baharu Tahap 1
Jabatan Pengajian Politeknik,
Kementerian Pendidikan Malaysia
Expert Panel
2 Malaysian Qualifications Agency
(MQA) panel
Panel
3 Creativity & Innovative Technology
Competition- CITEC Exhibition 2014
Manpower Department, Ministry of
Human Resources, Malaysia
Judge
4 National Occupational Skills Standard (NOSS),
NOSS- Instrumentation Control System- Level
3, 4 and 5 ,2013
National Occupational Skills Standard
(NOSS),
Department of Skill Development,
Ministry of Human Resources, Malaysia
Expert Panel
5 Special Project: Hardware in Loop Research
Program- 2012
Proton Shah Alam, Research Department Expert panel
6 Stakeholders Engagement for Planning and
Setting Direction of Green Technology Master
Plan Preparation-2012
Ministry of Energy, Green Technology
and Water (KeTTHA) and Malaysian
Green Technology Corporation
(GreenTech Malaysia).
Facilitator
7 Bachelor of Technology (Hons) in Applied
Automotive program, Department of
Mechanical and Automotive Engineering
(2011-2013)
Kuala Lumpur International University
College (KLIUC)
Industrial Stake
Holder
8 Engineering Industrial Training (EIT)
Workshop- 2013
Kulliyah of Engineering, International
Islamic University (IIUM)
Invited Speaker
9 Starting School, for Semester 1 2013/2014,
Pusat Kokurikulum Pembangunan Pelajar
(PKPP) 2013
Universiti Putra Malaysia Facilitator
10 Bachelor of Electrical and Electronic
Engineering
Department of Electrical and Electronic
Engineering, Universiti Putra Malaysia;
2008–13
Program
Evaluator
11 Green Technology Challenge.2013 Schneider Electric Malaysia University
Challenge-
Proposal
evaluator
12 Organising Committee Asian International
Conference
Asian Control Conference 2015
(ASCC2015)
Technical
programme
11
Updated on 8.2.2015
13 Modelling and simulation using MATLAB Faculty of Engineering, 7-8 May 2003 Facilitator
14 1. American Journal of Modeling and
Optimization
2. Journal of Automation and Control
Engineering
3. Progress in Intelligent Computing and
Applications
4. International Journal of Electronics and
Electrical Engineering (IJEEE)
(http://www.sciepub.com/journal/AJM
O). :ISSN (Print): 2333-1143
(www.aicit.org/jace/home/editorial.htm
l). ISSN : 2287-6529
www.humanpub.org/pica/home/editori
al.html) ISSN: 2287-4844
http://www.ripublication.com/irph/ijeee
.htm ISSN: 2301-380X
Editorial
Committee
Editorial
Committee
Editorial
Committee
Editorial
Committee 15 1. American Journal of Vehicle Design
2. Journal of Automation and Control
Engineering
3. Mathematical Problems in Engineering
IF 1.082
Journal Reviewer
Journal Reviewer
Journal Reviewer
16 Science Fund Proposal: UTM0005505.
Ministry of Higher Education, 2012
Evaluator
17 1. 2014 IEEE Innovative Smart Grid
Technologies Conference - Asia (ISGT
ASIA) (ISGT14).
Malaysia
Reviewer
18 1. ICCSCE 2013 : 2013 International
Conference on Control System, Computing
and Engineering, Penang Malaysia
2. Asia Conference on Mechanical and
Materials Engineering (ACMME
2013).Wuhan, China, Oct 8-9,2013.
3. The 3rd IEEE International Conference on
Computer, Control & Communication
(IEEE-IC4 )- Pakistan 25-26 Sept 2013
4. CMAME 2013 - International Conference
on Mechanical, Automotive and Materials
Engineering (CMAME 2013)- Hong Kong
5. IEEE Business Engineering and Industrial
Applications Colloquium 2013 (IEEE
BEIAC 2013)-Malaysia
Malaysia
China
Pakistan
Hong Kong
Malaysia
Reviewer
Reviewer
Reviewer
Reviewer
Reviewer
19 1. IEEE International Conference on Power
and Energy, 2-5 Dec 2012.
2. International Conference on Agricultural,
Food and Biological Engineering, 2012
3. The 2nd International Symposium on
Mechanical Science and Technology
(ISMST 2011), 20-21 Dec Guangzhou,
China
Malaysia
Malaysia
China
Reviewer
Reviewer
Reviewer
20 1. Colloquium on Humanities, Science &
Engineering Research (IEEE 2011)
Malaysia
Reviewer
21 1. The Asia-Pacific Symposium on Applied
Electromagnetic and Mechanics. (2010)
2. World Engineering Congress (WEC 2010)
Malaysia
Malaysia
Reviewer
Reviewer
12
Updated on 8.2.2015
22 Editorial Committee for Society Automotive
Engineering (SAE) conference International
Conference on Sustainable Mobility 2010.
Malaysia
Chairperson
23 1. Asia Pacific Conference on Defence &
Security Technology (DSTC 2009).
Malaysia
Reviewer
Thesis Examiner
Master- Internal Examiner
No. Name Title Designated
1. Ahmed M.M Almassri Development of Grasping Algorithm for Measuring
unknown Objects Weight on robotic Hand Application
Chairman/2014
2. Sanaz Yadegar Chatter-Free and Equivalent Estimator Fuzzy Model
Based Sliding Mode controller for Serial Link 6 DOF
Robot Manipulator
Chairman/2014
3. Wong Zhen Yang
Wearable Power Assisted Exoskeleton For Rehabilitation
Chairman/2015
4. Norazlin Ibrahim An Analysis of Bilinear Distillation Column Using
Tubular Model
Examiner/2004
Master – External Examiner
No. Name Title Designated 1. Jailani Jamaludin Cutting Force Compensation Using Distribution Force
Observer for XYZ Positioning Table
UTeM/2015
Examiner
Student Supervision - PhD
Main Supervisor
No. Name Title Status
1. Tengku Azman Tengku
Mohd (GS37906)
Development of Hybrid Artificial Intellignce for Energy
Management of EV
Ongoing
Co-Supervisor
No. Name Title Status
1. Mohammed Ahmed
(GS38414)
Parabolic Dish Antenna Control On going
2. Norhafeezah Kamarudin Development of Lifting Model for Malaysia Population On going
3. Ahmed Hassan Mohamed-
GS32088
Collision Prediction based Reinforcement Learning for
mobile robot navigation in dynamic environment
Submitted
4. Hoon Yap, GS37714 Multilevel Inverter for Power Quality Mitigation On-going
Co-Supervisor- other universities
No. Name Title University
1. Mohd Kamal Hat
(GE130114) - ongoing
Hybrid Algorithm for Traction Motor
Control of EV
Universiti Tun Hussein Onn
Malaysia
13
Updated on 8.2.2015
Student Supervision - PhD
Main Supervisor
No. Name Title Status
Student Supervision – Master
Main Supervisor
No. Name Title Status
1. Azhar Omar
(GS32225)
Lightning Severity Classification Utilizing the
Meteorological Parameters: A Neural Network Approach
Graduated
2. Ameer M.F Sider
(GS34664)
Development of Brake by Wire (BBW) System for Electric
Vehicle- power reduction
Graduated
3 Mohd Hafiz Bin Mohd
Nordin
Development of fault detection system of air-fuel ratio
control using HiL
On- going
4. Adel Amiri Bahmanshiri
(GS34284)
Development of electric power assistant steering system (
EPAS ) for electric vehicle-power reduction
Submitted
5. Hussein Taleghani
(GS39533)
Development of energy management system for Electric
Vehicle
On going
6. Wan Mohd Khidhir Abdul
Aziz (GS37379)
CAN communication for Electric vehicle control panel On going
7. Malathi Naidu A/P
Chandran (GS32398)
Development of intelligent Water treatment control for Indah
Water On going
8. Abdul Rahman Abdul
Kareem Sattoori Al-
Shanoon (GS39676)
Development of precise control of Medical instrument
controller with PIC On going
Co-Supervisor
No. Name Title Status
1. Mohammad Seifi
(GS31812)
Design, Modeling And Simulation of Hybrid Microgrid with
Smart Demand Side Management
Graduated
2. Ahmed Abdulelah
(GS34940)
Develop a Real-Time Tuning Algorithm for Inaccurate
Model Using Modified Hill Climbing Approach
Graduated
3. Umi Kalsom Bt Mohamad
Yusof (GS36373)
Development of E-Nose Herbs Recognition System Based on
Artificial Intelligence Technique
On going
4. Balbir Shah @ Mohd
Faddullah
Comparative Performance of On-Off, PID and Fuzzy Logic
Controllers pH Process in Boiler Application
Graduated
5. Ahmad Abdusalam Firjani A Web-Based Control and Monitoring System Graduated
6. Yousef A. Ettomi Ali Development of a Micro-controller Based Closed Loop
Speed Control System of DC Motor.
Graduated
7. Maspaliza Bte Azri Design and Development of a Fault Detection System
for symbol Printedon Integrated Circuit Chip by Matrox
Graduated
Co-Supervisor- other universities
No. Name Title University
1. Nor Aziah Mohd Azubir-
ongoing
Development of State Flow Algorithm for Power
Consumption of EV
Universiti Teknologi
Malaysia, CAIRO, Kuala
Lumpur
2. Rabiatul Adawiyah Abu
Hanifah
Graduated
Design and Development of Intelligent Electric
Power Assist Steering (EPAS) System for Electric
Vehicle.
Dept of Mechatronic
Engineering, Kulliyah of
Engineering, IIUM
14
Updated on 8.2.2015
No. Name Title University
Sports
1. Football, Badminton, Tarik
tali
Faculty of Engineering, for Inter Pusat Tanggunjawab Champions
2002
2. Volleyball and badminton Faculty of Engineering, for Inter Pusat Tanggunjawab Semi final
2002
3. Football and volleyball Faculty of Engineering, for Inter Pusat Tanggunjawab 2003- 2014