cre1-6 a-fgj-a-e-hqqe 1x200-240 60hz · grundfos data booklet cre1-6 a-fgj-a-e-hqqe 1x200-240 60hz...
TRANSCRIPT
GRUNDFOS DATA BOOKLET
CRE1-6 A-FGJ-A-E-HQQE 1x200-240 60HZ Grundfos Pump 98389292
Thank you for your interest in our productsPlease contact us for more information, or visit our websitehttps://www.lenntech.com/grundfos/CRE01/98389292/CRE-1-6-A-FGJ-A-E-HQQE.html
[email protected]. +31-15-261.09.00fax. +31-15-261.62.89
BE > THINK > INNOVATE
Printed from Grundfos Product Centre [2018.02.043]
Position Qty. Description1 CRE 1-6 A-FGJ-A-E-HQQE
Product No.: 98389292Vertical, non-self-priming, multistage, in-line,centrifugal pump for installation in pipe systemsand mounting on a foundation.
The pump has the following characteristics:- Impellers and intermediate chambers are made of- The shaft seal has assembly length
according to EN 12756.- Power transmission is via cast iron split
coupling.
The pump is fitted with an IEC-flanged single-phaseMGE motor with frequency converter andPI-controller integrated in the motor terminalbox. No additional motor protection is required asboth motor and electronics are protected byintegrated overload and temperature protection.
External sensor can be connected if controlledpump operation based on for example flow,differential pressure or temperature is required.
A control panel enables setting of requiredsetpoint as well as setting of pump to MIN or MAXoperation or to STOP. The control panel hasindicator lights for "Operation" and "Fault".
Communication with the pump is possible by meansof Grundfos R100 Remote Control enabling furthersettings as well as reading out of a number ofparameters such as "Actual value", "Speed","Power input" and total "Power consumption".
The terminal box holds terminals for theconnection of:
- Pump start/stop (potential-free contact),- external remote setpoint setting via analog
signal, 0 - 10 V, 0(4) - 20 mA,- 10 V voltage supply for setpoint potentiometer,
Imax = 5 mA,- sensor, 0 - 10 V, 0(4) - 20 mA,- 24 V voltage supply for sensor, Imax = 40 mA,- input for forced control to MIN, MAX, External fault
or Flowswitch (potential-free contact),- potential-free fault signal relay with
changeover contact,- RS485 GENIbus.
Controls:Frequency converter: Built-inPressure sensor: N
Liquid:
Printed from Grundfos Product Centre [2018.02.043]
Position Qty. DescriptionPumped liquid: WaterLiquid temperature range: -20 .. 120 °CLiquid temperature during operation: 20 °CDensity: 998.2 kg/m³
Technical:Speed for pump data: 3380 rpmRated flow: 2.2 m³/hRated head: 40 mPump orientation: VerticalShaft seal arrangement: SingleCode for shaft seal: HQQEApprovals on nameplate: CE, EAC,ACSCurve tolerance: ISO9906:2012 3B
Materials:Base: Cast iron
EN 1561 EN-GJL-200ASTM A48-25B
Impeller: Stainless steelEN 1.4301AISI 304
Bearing: SIC
Installation:Maximum ambient temperature: 50 °CMaximum operating pressure: 25 barMax pressure at stated temp: 25 bar / 120 °C
25 bar / -20 °CType of connection: DIN / ANSI / JISSize of inlet connection: DN 25/32
1 1/4 inchSize of outlet connection: DN 25/32
1 1/4 inchPressure rating for pipe connection: PN 25Flange rating inlet: 250 lbFlange size for motor: FT85
Electrical data:Motor standard: IECMotor type: 71AIE Efficiency class: IE5Rated power - P2: 0.55 kWPower (P2) required by pump: 0.55 kWMains frequency: 50 HzRated voltage: 1 x 200-240 VRated current: 3,45-2,90 ACos phi - power factor: 0,98Rated speed: 360-4000 rpmEfficiency: 85,3%Motor efficiency at full load: 85.3 %Enclosure class (IEC 34-5): IP55Insulation class (IEC 85): F
Others:Minimum efficiency index, MEI ≥: 0.7Net weight: 27.1 kgGross weight: 30 kgShipping volume: 0.143 m³Danish VVS No.: 385940206
Printed from Grundfos Product Centre [2018.02.043]
98389292 CRE 1-6 50 HzH
[m]
0
5
10
15
20
25
30
35
40
45
50
55
Q [m³/h]0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 2.8
eta[%]
0
10
20
30
40
50
60
70
80
CRE 1-6, 1*230 V
100 %
90 %
80 %
70 %
60 %
50 %
40 %
21 %
P[W]
0
100
200
300
400
500
600
NPSH[m]
0
2
4
6
8
10
12P1 (motor+freq.converter)
P2
Printed from Grundfos Product Centre [2018.02.043]
H[m]
0
5
10
15
20
25
30
35
40
45
50
55
Q [m³/h]0 0.5 1.0 1.5 2.0 2.5
eta[%]
0
10
20
30
40
50
60
70
80
CRE 1-6, 1*230 V
100 %
90 %
80 %
70 %
60 %
50 %
40 %
21 %
P[W]
0
100
200
300
400
500
NPSH[m]
0
2
4
6
8
10
P1 (motor+freq.converter)
P2
141250 180
220
105
214
333
G 1/2 G 1/2
1 X G 1/2
75
100 3589
x x 24.5194
x 13.54
20158
122
100
140
3
15
8
26
23
25
24
7
21
20
22
B
Y
6
5
2
4
10
A
+24 V*
1
149
12
17
19
11
18+24 V*
OC DI
+24 V*
AI2
GDS RX
GDS TX
GND
GENIbus A
GENIbus B
+24 V
GND
GENIbus Y
GND
DI1
AI1
DI3/OC1
LiqTec
AI3
GND
DI2
LiqTec
GND
AO
Pt100/1000
Pt100/1000
DI4/OC2
GND
+24 V*OC DIGND
NC
C2
NO
NC
C1
NO
+24 V*+24 V* +24 V*/5 V*
N
L
N
L
PE
+24 V* +24 V*/5 V*+24 V*
+24 V*/5 V*
+5 V*
+5 V
+24 V
+5 V
+5 V*
Description ValueGeneral information:Product name: CRE 1-6 A-FGJ-A-E-HQQEProduct No: 98389292EAN number: 5711494175154Technical:Speed for pump data: 3380 rpmRated flow: 2.2 m³/hRated head: 40 mStages: 6Impellers: 6Low NPSH: NPump orientation: VerticalShaft seal arrangement: SingleCode for shaft seal: HQQEApprovals on nameplate: CE, EAC,ACSCurve tolerance: ISO9906:2012 3BPump version: AModel: AMaterials:Base: Cast iron
EN 1561 EN-GJL-200ASTM A48-25B
Impeller: Stainless steelEN 1.4301AISI 304
Material code: ACode for rubber: EBearing: SICInstallation:Maximum ambient temperature: 50 °CMaximum operating pressure: 25 barMax pressure at stated temp: 25 bar / 120 °C
25 bar / -20 °CType of connection: DIN / ANSI / JISConnect code: FGJSize of inlet connection: DN 25/32
1 1/4 inchSize of outlet connection: DN 25/32
1 1/4 inchPressure rating for pipe connection: PN 25Flange rating inlet: 250 lbFlange size for motor: FT85Liquid:Pumped liquid: WaterLiquid temperature range: -20 .. 120 °CLiquid temperature during operation: 20 °CDensity: 998.2 kg/m³Electrical data:Motor standard: IECMotor type: 71AIE Efficiency class: IE5Rated power - P2: 0.55 kWPower (P2) required by pump: 0.55 kWMains frequency: 50 HzRated voltage: 1 x 200-240 VRated current: 3,45-2,90 ACos phi - power factor: 0,98Rated speed: 360-4000 rpmEfficiency: 85,3%Motor efficiency at full load: 85.3 %Enclosure class (IEC 34-5): IP55Insulation class (IEC 85): FMotor protec: YESMotor No: 98248246
141250180220
105G 1/2G 1/2
1 X G 1/2
10035
89
xx24.5194
x13.54
158122
Printed from Grundfos Product Centre [2018.02.043]
Description ValueControls:Control panel: StandardFunction Module: FM300 - AdvancedFrequency converter: Built-inPressure sensor: NOthers:Minimum efficiency index, MEI ≥: 0.7Net weight: 27.1 kgGross weight: 30 kgShipping volume: 0.143 m³Danish VVS No.: 385940206
Printed from Grundfos Product Centre [2018.02.043]
98389292 CRE 1-6 50 Hzcos phi
eta
0.0
0.2
0.4
0.6
0.8
P2 [kW]0 0.05 0.10 0.15 0.20 0.25 0.30 0.35 0.40 0.45 0.50
I[A]
0.0
1.0
2.0
3.0
4.0
CRE1-6 + 71A 0.55 kW 1*230 V, 50 Hz
eta
cos phi
I
n[rpm]
0
1000
2000
3000
P1[kW]
0.0
0.2
0.4
0.6
n
P1 (motor+freq.converter)
n = 100 %
Printed from Grundfos Product Centre [2018.02.043]
98389292 CRE 1-6 50 Hz
Note! All units are in [mm] unless others are stated.Disclaimer: This simplified dimensional drawing does not show all details.
141
250
180
220
105
214 333
G 1
/2G
1/2
1 X
G 1
/2
75
100
35 89
xx
24.5
194
x13
.54
20
158
122
100140
Printed from Grundfos Product Centre [2018.02.043]
98389292 CRE 1-6 50 Hz
Note! All units are in [mm] unless others are stated.
3
15
8
26
23
25
24
7
21
20
22
B
Y
6
5
2
4
10
A
+24 V*
1
14
9
12
17
19
11
18+24 V*
OC DI
+24 V*
AI2
GDS RX
GDS TX
GND
GENIbus A
GENIbus B
+24 V
GND
GENIbus Y
GND
DI1
AI1
DI3/OC1
LiqTec
AI3
GND
DI2
LiqTec
GND
AO
Pt100/1000
Pt100/1000
DI4/OC2
GND
+24 V*OC DIGND
NC
C2
NO
NC
C1
NO
+24 V*+24 V* +24 V*/5 V*
N
L
N
L
PE
+24 V* +24 V*/5 V*+24 V*
+24 V*/5 V*
+5 V*
+5 V
+24 V
+5 V
+5 V*
Disclaimer: The information about the Grundfos pump in this document may be outdated.Data may be subject to alterations without further notice.Please contact us to verify the data above is still accurate/up-to-date.
All information is copyright Grundfos.
[email protected]. +31-15-261.09.00fax. +31-15-261.62.89