courtaboeuf, october 7th 2003
DESCRIPTION
FRAMEWORK Data Tree management improvement Directory creation Move by: Move to Mouse drag and drop FRAMEWORK Data Tree management improvement Directory creation Sort within the directoryTRANSCRIPT
New features V4 SAMCEF Field
7th October 2003
New features SAMCEF Field
version 4
Claire HAMMERCourtaboeuf, October 7th 2003
New features V4 SAMCEF Field
7th October 2003
FRAMEWORKData Tree management improvement
Directory creation
Sort within the directory
Move by:• Move to• Mouse drag and
drop
New features V4 SAMCEF Field
7th October 2003
FRAMEWORK
User preference management
Choice of the default unit
Order of appearance
New unit introduction
New features V4 SAMCEF Field
7th October 2003
FRAMEWORK
Improvement of face selection with a table
New features V4 SAMCEF Field
7th October 2003
MODELER
Direct CATIA V4 and CATIA V5 interface (option)
New features V4 SAMCEF Field
7th October 2003
MODELER
Analysis tools for the geometry
Tolerance visualization Invalid geometrical entities visualization Non analytical geometrical entities visualization Small and thin faces visualization
New features V4 SAMCEF Field
7th October 2003
MODELER
Tools
Line division by one point Display of relative distances (DX, DY,DZ) Angle calculation between 2 edges or 3 points
New features V4 SAMCEF Field
7th October 2003
MODELER
Highligthing of the nootebook variables in the 3D viewer and the data tree
New features V4 SAMCEF Field
7th October 2003
MODELER
Scaling fonctionnality
New features V4 SAMCEF Field
7th October 2003
MODELER
Improvement of the shading
Texture aspect
New features V4 SAMCEF Field
7th October 2003
SUPER ELEMENTS
Creation
Choice of the analysis type : Creation Super Element Retained nodes selection in the Analysis Data Convertion in bacon file with .CSUP command Launch of ASEF or DYNAM Back up of a sfield file specific for super element
creation:• Geometry • Retained nodes + gravity center node• References to the calculation files (.sdb, .u18, ...)
New features V4 SAMCEF Field
7th October 2003
Importation of one or several super elements
SUPER ELEMENTSUtilisation
Choice of the analysis type : Linear Static, Implicit Non Linear, ...
Post treatment
Automatic numerotation of nodes and elements for super elements
Automatic creation of the.USUP command (files management)
Placement of the super elements and copy of the model
Coexistence of the super with classic geometry
Analysis data can be applied on geometrical entities or retained nodes
New features V4 SAMCEF Field
7th October 2003
SUPER ELEMENTS
Recovery
Automatic creation of a Sfield recovery file from the utilisation session
Opening of a new session with analysis type : Super Element Recovery
Conversion in bacon file with.RSUP Launch of the calculation Post treatment
New features V4 SAMCEF Field
7th October 2003
ANALYSIS DATA
BEHAVIOR
Composite thick shell One element in the thickness One laminate by element
The face of spreading must be the same than the extrusion mesh face
New features V4 SAMCEF Field
7th October 2003
ANALYSIS DATABEHAVIOR
Beam profils
Profiles library (from BACON) Profile visualization in the 3D viewer Post treatment : Maximum stress visualization
New features V4 SAMCEF Field
7th October 2003
ANALYSIS DATA
CONSTRAINT Addition of a new local axe
ASSEMBLY Spherical jointScrew Flexible sliderSlider along a lineRigid-flexible contact (.MDS) Distance sensor along a curve
New features V4 SAMCEF Field
7th October 2003
ANALYSIS DATAFor all the dialog box edition possibilities for support or data
New features V4 SAMCEF Field
7th October 2003
MESH
Mesh importation from PATRAN, ANSYS,IDEAS
Nodes and elements numerotation by object
New features V4 SAMCEF Field
7th October 2003
MESHMesh extrusion or revolution from 1D or 2D mesh
New features V4 SAMCEF Field
7th October 2003
Mesh projection from one face to a similar one
MESH
New features V4 SAMCEF Field
7th October 2003
Mesh by extrusion, translation or projection on « prismatic » solids
MESH
Available for the geometries imported or created in SAMCEF Field
Solid among which 2 opposite faces have the same number of edges
2 bases can contain holes
New features V4 SAMCEF Field
7th October 2003
MESH
Examples of meshed geometries
New features V4 SAMCEF Field
7th October 2003
MESH
New features V4 SAMCEF Field
7th October 2003
MESHImprovement of mesh visualization (shading color)
New features V4 SAMCEF Field
7th October 2003
SOLVER
Bacon file
Abbreviation creation for selection composed of one node or one point
One attribute by mesh object
Epilogue Back up of note book
parameters in the bacon file
New features V4 SAMCEF Field
7th October 2003
Treatment of the results available in SAMCEF
RESULTPerformance improvement for results loading SAMRES modification New file format *.fieldresults
New features V4 SAMCEF Field
7th October 2003
RESULT Display
Reaction and displacement visualization as vector
New features V4 SAMCEF Field
7th October 2003
RESULT Stress
Display of cross of constraints
Traction
Compression
Tensor listing
New features V4 SAMCEF Field
7th October 2003
RESULT
Display of the result as scalar/node/element
New features V4 SAMCEF Field
7th October 2003
MECANO and DYNAM
Display of rigid modes
RESULT
MECANO
Display of the codes 900* (from .VIF)
Rigid Modes Eigenvalues
New features V4 SAMCEF Field
7th October 2003
Listing
RESULT
Back up to Excel format
In the 3D viewer display of the location of node and element selected in the table
New features V4 SAMCEF Field
7th October 2003
Picture capture Improvement of picture
quality
RESULT
Change of the background color
User choice for the picture size