Corrosion Resistant Fluid and Air Handling Systems

Pr

od

uc

t

Lin

e

Ca

rd

PureTech® High Purity/Deionized Water Piping SystemsSimtech “next generation” PureTech piping systems are available in a choice of three high purity materials that are vastly superior to other high purity piping materials available in today’s market. Highest quality resin formulation and enhanced extrusion technologies ensure low leachables and superior surface qualities to meet applications ranging from low water purity (resistivity of less than 1 meg OHM/CM) to absolute water purity (resistivity of 18 meg OHM/CM). A wide range of manual, electric and pneumatic thermoplastic valves, actuators and controls are available to ensure proper piping system flow and pressure.• PureTech AP - AlphaPlus® PP Pipe, Valves, and Fittings (½” - 24”)• PureTech Kynar 740 - Kynar® PVDF Pipe, Valves, and Fittings (½” - 10”)• PureTech Specialty and Control Valves Including: Self-Draining, High Purity, Diaphragm, Pressure Relief, and Regulators

AlphaPlus® PP and Kynar® 740 PVDF Piping SystemsSimtech offers two outstanding, stress-relieved piping systems (AlphaPlus PP and Kynar PVDF) and fittings to handle a wide range of industrial pressure piping applications. Our unique inline annealing process results in a stress-relieved product that exhibits superior chemical resistance, reduces stress cracking, and provides greater impact resistance when compared to other PP and PVDF. AlphaPlus PP is compatible with a broader range of chemicals than other piping materials such as FRP and CPVC, and handles temperature ranges from 35°F-200°F. Kynar PVDF has outstanding chemical resistance to highly aggressive inorganic chemicals, acids, hydrocarbons and halogens, handles temperature ranges from -40°F-280°F and is an ideal substitute for exotic alloys. Both systems outperform and offer significant cost savings when compared to CPVC, FRP, lined steel, and exotic alloys. • Stress Relieved Pipe: AlphaPlus® PP - ½” - 48”, Kynar® PVDF - ½” - 16”• Molded Butt Weld Fittings: AlphaPlus® PP - ½” - 16”, Kynar® PVDF - ½” - 10”• Fabricated Fittings: AlphaPlus® PP - 18” - 48”, Kynar® PVDF - 10” - 16”• Molded Socket Fittings: AlphaPlus® PP & Kynar® PVDF - ½” - 4”

Thermoplastic Valves–Manual and ActuatedSimtech piping systems are available with a wide range of manual and actuated thermoplastic valves in a choice of PVC, Corzan® CPVC, AlphaPlus PP, and Kynar® PVDF to ensure proper piping system flow. Our in-house actuation capabilities include pneumatic and electric quarter-turn, and multi-turn packages with the following variety of accessories: limit switches, solenoids, 4-20 and 3-15 positioners, feedback potentiometers, control relays, speed control, heater, and thermostat.• PVC, Corzan® CPVC, AlphaPlus® PP, and Kynar® PVDF• True Union Ball Valves (½” - 4”)• Diaphragm Valves (½”- 8”)• Butterfly Valves (2” - 24”)• Horizontal Swing Check Valves (½” - 8”)• Relief, Regulator, Specialty, and Control Valves

DoubleQuik® Double Containment Piping SystemsSimtech DoubleQuik AlphaPlus PP, Kynar PVDF and PE secondary contained piping systems are the most reliable system on the market due to joint integrity–no splicing, mitering, gasketing, cementing, extrusion welding or coil fusion joining. Available in a variety of pressure ratings and sizes, DoubleQuik features a unique, modular design that makes installation of pipe and fittings quick and easy. The field-proven, versatile system also meets all environmental and safety regulations.• AlphaPlus® PP, PE, Kynar® PVDF Pipe• Fully Pressure Rated System• Worldwide Installations Since 1984• Easy to Install, Modular Design• Sizes from 1” x 3” through 18” x 24”• Optional Leak Detection Available

This information in this document is subject to change without notice. Simtech believes the information contained herein to be reliable, but makes no representations to its accuracy or completeness. Simtech, sole and exclusive warranty is as stated in the Standard Terms and Conditions of Sale for these products. In no event will Simtech be liable for any indirect, incidental, or consequential damages.

©Copyright, SIMTECH, 2009 Printed in USA. Kynar® 740 is a registered trademark of Atofina Chemicals. Corzan® is a registered trademark of Noveon Company. DoubleQuik and Pal-AT manufactured by, and registered trademarks of Perma-Pipe, Inc., a subsidiary of MFRI, Inc.

47A Runway Road • Bristol Industrial ParkLevittown, PA 19057P 215.547.0444 • F 215.547.9129

www.SimtechUSA.com

Your Authorized Simtech Distributor is:

ProDuct Fume Exhaust and Odor Control Duct SystemsSimtech ProDuct is the most comprehensive and complete, nonmetallic duct system handling the broadest range of aggressive, corrosive exhaust gases. Engineered to far exceed the capabilities of stainless and FRP, ProDuct is the only system on the market that offers molded socket fittings and dampers, as well as seamless extruded duct through 32”.• Sizes through 48”• F.M. Approved Systems• Molded Fittings and Accessories• Dampers–Manual and Actuated through 48”• Available in AlphaPlus® PP, Kynar® PVDF, PVC, and Corzan® CPVC

DualTech Structurally Reinforced Thermoplastic Piping SystemsSimtech DualTech® AlphaPlus® PP and Kynar PVDF piping systems eliminate fugitive emission, permeation, external corrosion, and liner collapse problems associated with PTFE/PFA lined steel piping systems. With fugitive emissions a priority in the CPI, DualTech is the only alternative to lined steel piping that is truly “flangeless”. Simtech DualTech AlphaPlus® PP and Kynar PVDF piping systems combine the chemical resistance of thermoplastics with the mechanical strength of fiberglass. Ideal for handling of aggressive media at elevated temperatures and pressure, DualTech AlphaPlus® PP is rated for 150 psi @ 180°F and DualTech Kynar® PVDF is rated 150 psi @ 300°F.• Structurally Reinforced Thermoplastic Piping• Flangeless Systems to Eliminate Fugitive Emissions• Pressure Rated to 300°F• Eliminates Permeation and Exterior Corrosion Problems• Patented Tools Allow Flangeless Field Installation

WeldTech Fusion Welding EquipmentSimtech offers a choice of both manual or hydraulically operated fusion equipment for field or workshop socket and butt welding of AlphaPlus® PP, PE, Kynar PVDF, and E-CTFE. Manual equipment comes complete with removable heating mirror, electric facing tool, reducing inserts and transport case. Hydraulic equipment incorporates the same components along with a motor and controls. • Manually and Hydraulically Operated Tools for Socket or Butt Fusion of AlphaPlus® PP, PVC, Kynar PVDF Pipe• Butt Fusion Sheet Welder• Non-Contact Infrared (IR) Manual & CNC Operated Machines.