PZ-Model Sliding Vane PumpsThe PZ-Series sliding vane pumps are speci cally designed for petroleum products and industrial solvents. Thisindustrial pump line is ideal fobulk pump loading and unloading, fuel oil delivery truck, and transport applications. Suitable liquids include petrochemicals, fuel oil, gasolinebiofuels, ethanol, solvents and many more. Unlike the CP- and CD-models, they do not come with a replaceable cam; however, you can replacethe sideplates. They have an adjustable internal relief valve and fewer mechanical sealing options than our CP- and CD-model pumpsAvailable in 2” and 2.5” sizes.

Features & Bene�tsFeatures :

Available in two pump sizes Designed for low pressure applications with a maximum working pressure of 200 psi (13.8 bar) Six vanes design with vane drivers O-ring construction Cam is not replaceable but the sideplates are reversible and can be replaced Foot mounted design is used in both stationary and truck con gurations Mechanically sealed pump with two sealing options Available with NPT, BSPT or Weld anges. ANSI ange kits available as well. Hydraulic drive option available

Operating Speci cations :Flow rates up to 165 gpm (624.5 l/min) Working pressures up to 200 psi (13.8 bar) Differential pressures up to 125 psi (8.6 bar) Temperature range: -25 to 300 °F (-32 to 149 °C) Viscosities up to 20,000 SSU (4,250 cSt

CP-Model Sliding Vane PumpsCP-model sliding vane industrial pumps are designed for a maximum working pressure of 200 psi (13.8 bar). The sliding vane design has selfadjusting vanes that offers a consistent level of pumping ef ciency throughout the life of the pump. They are constructed with a combinationof gaskets and O-rings, have an adjustable internal relief valve, and a wide variety of mechanical sealing options. Ideal for petroleum productswith low vapor pressures such as petroleum based oils, fuel oils and lube oils, and thin liquids such as alcohols and solvents. Available in 2”2.5”, 3” and 4” sizes.

Features & Bene�tsFeatures :

Available in ve pump sizesDesigned for low pressure applications with a maximum working pressure of 200 psi (13.8 bar)Foot mounted design is available in both stationary (single shaft) and truck (double shaft) con gurations Gasket and O-ring construction Six vane design with vane drivers Mechanically sealed pump with a wide variety of sealing options Depending on the model, available with NPT or ANSI anges. NPT anges use a gasket to seal the angeHydraulic and magnetic drive options are available Hydraulic drive option available

Operating Speci cations :Flow rates up to 400 gpm (1,514 l/min) Working pressures up to 200 psi (13.8 bar)Differential pressures up to 125 psi (8.6 bar).Exception: 4" models are limited to 100 psi (6.9 bar).Viscosities up to 20,000 SSU (4,250 cSt)

CORKENWe offer several models of positive displacement, sliding vane pumps for wide range of vapor pressures, differential pressures, anviscosities. The drive options include magnetic drive, hydraulic drive, gear reduced, and belt driven. Liquids suitable for our sliding vanpumps include but are not limited to aviation fuel, fuel oil, lube oil, solvents and lique ed gases such as LPG, ammonia, and CO2. Eacproduct group listed below is designed for the characteristics of a various liquids. Please ll the inquiries form to send your questions related to our products and services. 

Centrifugal PumpFTI centrifugal pumps are constructed from rugged, corrosion resistant materials including heavy gauge stainless steel and plastics speci callyengineered for maximum corrosion resistance. Pumps are available in either vertical or horizontal con gurations, either mechanically sealed omagnetically coupled for sealless operation. Mag drive pumps feature high-powered, rare earth magnetic couplings which allow thetransmission of maximum horsepower.

To view our centrifugal pump selections, simply click on the categories at left and browse through the various offerings, or use our onlineCentrifugal Pump Selector application. The selector automatically searches for the best matches based on hydraulic requirements and providesa list of choices for consideration.

Features & Bene�tsCentrifugal Pumps Series

AC  Sealed Stainless Steel

AK Stainless Steel CantileveredVertical

AV Stainless Steel Vertical

DB Plastic Mag-Drive

GP Chemical Process, CorrosionResistant

KC Legacy Plastic Mag-Drive

MSKC Plastic Sealless Multistage

MSVKC Vertical Plastic SeallessMultistage

SP Plastic Mag Drive Self - Priming

UC,ETFE

Lined Heavy Duty Mag Drive

VKC Plastic Vertical Sealless

Drum And Barrel PumpsFeatures & Bene�tsDrum And Barrel Pumps Series :

EF SeriesS Series

PF SeriesTB SeriesTBP SeriesTT SeriesBT SeriesHVDP SeriesTM SeriesFlowmeter

FTIFinish Thompson conveniently offers a variety of centrifugal pump and drum pump  designed to enhance any pump system. Please ll the inquiries form to send your questions related to our products and services. 

Pump AccessoriesFeatures & Bene�ts

Variable Frequency Drive

Variable frequency drives from Finish Thompson are easy to install and operate, offering innovative technology in a compact size. Simplyselect a VFD from the available models below based input power and motor voltage. Contact Finish Thompson for additional assistance.

M20 Power MonitorCentrifugal Pump Base Plates

Finish Thompson's deluxe M20 Power Monitor with digital display and PLC output provides outstanding protection against pump failuredue to run dry, dead heading, excess power, de-coupling and lack of priming (SP Series).

The M20 operates at 50 or 60 Hz, is easy to install, and offers four levels of protection (pre-alarm minimum & maximum power; alarmminimum & maximum power). Just three models cover all motor voltages up to 690 VAC and a transducer is included with each M20 atno additional charge.

For selection assistance, please contact Finish Thompson. Please have the voltage the motor will operate at and, if not ordering a motowith the pump, please also provide the motor data (i.e. brand, single or 3-phase, HP, etc.).

Pedestal Frame

Pedestal assemblies enable a pump to be coupled to special AC or DC electric motors, air motors, gas or diesel engines, and hydraulicmotors using a exible coupling. Finish Thompson offers standard pedestal assemblies to t any of our horizontal centrifugal pumps witha NEMA 56C motor adapter.

A pedestal assembly option is also offered for the UC Series to t NEMA frame sizes 145TC up to 256TC and IEC 90 up to 160.

Optional pedestal frame accessories, such as couplings, coupling guards, and base plates are available upon request.

Flow Meter

Finish Thompson ow meters can dispense and batch precise amounts of uids from drums, barrels, totes and other containersConstructed of splash- and corrosion-resistant polypropylene or PVDF construction, ow meters can handle a wide variety of chemicalsand corrosive liquids such as acids, bases, cleaners, coolants, plating solutions, pesticides and herbicides.

They are available as standard preset factory calibrated to provide ow rate and total volume pumped, with user calibration available focustom ow rates and totals available in select models. Batch control, available on FMBC models, stops the pump after a customeadjustable preset volume has been pumped.

With an easy to read LCD display, push-button interface, engineered connection components for fast assembly, and an automatic powedown feature to extend the life of battery-operated models, FTI ow meters offer user friendly features for ease of pumping anddispensing.

Flow meters offers +/- 1% accuracy and repeatability when pumping uids with viscosities up to 20 cP at temperatures ranging from32� F (0� C) to 120� F (49� C) with ow ranging between 5 gpm (20 lpm) to 32 gpm (120 lpm). Meters are designed for use onPFM, PFP and PFV drum pumps. Please contact Finish Thompson for capabilities of speci c models to ensure correct selection for youapplication.

Static Protection Kit

Finish Thompson’s Static Protection Kit (SPK) is recommended to help prevent the accumulation of static charge when transferringammable or combustible liquids. It is to be used in conjunction with stainless steel drum pumps and air or explosion-proof electric

motors.

When pumping ammables at high ow rates, a static charge can build up due to the high velocity at which the uid is moving. Staticcharge can become a spark capable of igniting ammable liquids. This is rare occurrence, but it is wise to prevent the possibility by usingthe SPK. Keeping the velocity of the liquid low signi cantly reduces these hazards. Our metal tube pumps combined with an appropriatemotor and static protection kit is an engineered package designed to provide customers with a high level of protection when pumping

ammable liquids.

The SPK is a conductive, 4-foot long x 1-inch I.D. cross-linked polyethylene discharge hose with grounding cables to bond the pumpmotor, hose and receiving drum. It will also limit the pumps output velocity to 3-feet/second maximum (about 7 gpm through a 1’’ hose)which will reduce the hazards of static build-up.

Nozzles

Nozzles allow for the safe dispensing of uids and greater control when lling containers. Select from our available options below.Discharge Tubing

Flexible discharge tubing is used to safely transfer uids from pump to container.

Discharge tubing is available in clear or reinforced PVC with operating temperatures ranging from -22˚ F (-30˚ C) to 175˚ F (79˚ C)Operating temperature is dependent upon material and applicable pump model.

Standard length is 5 ft., but tubing can also be purchased by the foot (4 ft. minimum is required).

Miscellaneous Drum Pump Accessories

Stainless Steel Hose Clamp - Secures discharge tubing around pump and ttings.

Drum Adapter - Keeps pump snug in container bung & limits escape of fumes. Fits standard 2" IPS bung opening.

Inlet Strainer - Prevents intake of objects or particulates.

Wall Mount Bracket - Stores pump upright on the wall.

Chargers - Charges S6 lithium ion motor in two hours.

Discharge Spout - Attach quick disconnect ttings, ow meters, or hard piping.

Pump Accessories

CENTRIFUGAL PUMP ACCESSORIESVFD (Variable Frequency Drive)M20 Power MonitorBase PlatesPedestal Assembly

DRUM PUMP ACCESSORIESFlow MetersStatic Protection KitNozzlesDischarge TubingMiscellaneous

 

Solvent Recyclers (distillation Systems)USA manufactured, Finish Thompson Solvent Recycling systems incorporate superior technology and design to recycle almost any solvent foreuse. This solvent recycling (distillation) equipment has a proven track record. Thousands of satis ed customers use these solvent recyclers tosuccessfully recycle millions of gallons of waste solvent on site each year.

Finish Thompson was a pioneer in the design and technology development of on site solvent distillation. FTI's batch distillation systemsachieved patent status and received certi cation from independent testing agencies. Nearly 30 years of manufacturing experience in thisindustry earned FTI an international reputation as an expert in the design, manufacture, and application of solvent distillation/solvenrecycling technology. FTI solvent recyclers carry a 3-year warranty along with a lifetime warranty on the heater unit.

Features & Bene�tsWhy Recycle?

Fast payback - recycle a gallon of solvent for about 10¢/gallon.Dramatically reduces new solvent purchasesReduces liability associated with hazardous waste disposalAchieves a 99.9% solvent purityMinimal operator involvement - Turn it on and return when it is nished.Easy to operate and virtually maintenance freeEnvironmentally friendly - recycling is good for the environment

How It Works

Insert a Stilbag liner into the distillation tankFill the bag with waste solvent and close the lid.Turn the unit on. The waste solvent is heated until it turns to vapor.Vapors cool and condense into clean, reusable solvent. Clean solvent is ready for reuse.The Stilbag containing the residue from the process is removed

LS Series Common Characteristics

Standard unit recycles solvents with boiling points to 300°F (150°C).JetVac option expands solvent boiling point range to 500°F (260°C)Process completion time 8 hoursAll distillation tanks feature non-stick coating (except LS-55STE)Stilbags available for all models.Electrical requirements: 240V, 1 phase, 50/60 HzThe Stilbag containing the residue from the process is removed.

Engine Coolant Or Antifreeze RecyclersBE SERIES Finish Thompson's BE-55C antifreeze recycling system utilizes advanced vacuum distillation technology to recycle waste engine coolant.

WHY USE VACUUM DISTILLATION TO RECYCLE WASTE ENGINE COOLANT? Simply put, FTI's patented distillation technology excels at removing all contaminants, both suspended and dissolved, from the waste coolantIt provides the highest quality, recycled coolant available and is the only process that removes water from the waste stream...resulting in adistillate (end product) of concentrated pure glycol.

This technology has been laboratory and eet tested and is approved by numerous automotive and heavy duty OEMs. All recycling equipmenis USA manufactured following ISO9001 guidelines for consistency in manufacturing procedures and commitment to promised deliveryschedules.

Features & Bene�ts(/engine-coolant-or-antifreeze-recyclers/483-standard-features)Standart Features :

Patented process.Two stage process delivers a concentrated, clean glycolProcesses 55 gallons of waste per batchRequires no external water sourceAutomatic ll complete with ll hose and level sensor

http://badjaabadisentosa.com/engine-coolant-or-antifreeze-recyclers/483-standard-features

Air assisted drain makes reside removal easySingle button controls the entire distillation processNo lters required.FTI Premium Inhibitor restores corrosion protection to processed glycolUnit skid mounted for easy installationRugged construction - built to lastToll free technical support hotline (U.S. & Canadian customers only)

Bene ts :

Removes virtually all contaminants, both suspended and dissolvedRemoves excess water from waste coolant providing concentrated glycolProcess approved by OEMsWorks on conventional, long-life, Japanese, European, and ethylene or propylene based glycolsReduces new coolant costsReduces long-term liability associated with coolant disposalAllows the recovery of a valuable, non-renewable resourceHelps protect sewage treatment plants from heavy metals and high BOD/CODMinimal operator involvement.

BE-55C55-gallon engine coolant recycling system. Recycles 55 gallons of waste engine coolant in 16-18 hours. FTI Premium Inhibitor restorescorrosion protection attributes to glycol distillate. Processes ethylene or propylene based glycols.Speci cations: Process time: 16 to 18 hours

Dimensions: Height: 60" (152 cm) Width: 54" (137 cm) Depth: 32" (81 cm)

Electrical Requirements: 240V, 3 phase, 50/60 Hz; 40 amps

Process Equipment CatalogCorrosion-resistant design utilizes liquid salt nitriding, nickel plating, stainless steel, aluminum and chrome on key components for longelifeFew moving parts in the air motor assembly means less downtime and low repair costDisplacement rods have minimal wear due to a proprietary Graco manufacturing processLarge air porting design provides ef cient use of compressed air supply for continuous pump operation without icingThick cast aluminum air motor housing offers unmatched durability

 

Features & Bene�tsAir Operated Double Diaphragm Pumps

Model   Connection Size

Husky 205 Plastic ¼" (6,3mm)

Husky 307 Plastic 3/8" (9,8mm)

Husky 515 Plastic ½" (12,7mm)

Husky 716 Metal ¾" (19,1mm)

Husky 1050 Plastic 1" (25,4mm)

GRACOGraco pumps are built to last. With so many innovative maintenance-saving features, Graco pumps reduce downtime and save yomoney. No matter what uid you’re pumping Graco has a quality solution for your low, medium or high volume application. Please ll the inquiries form to send your questions related to our products and services. 

Husky 1050 Metal 1" (25,4mm)

Husky 1590 Plastic 1" - ½" (38,1mm)

Husky 1590 Metal 1" - ½" (38,1mm)

Husky 2150 Plastic 2" (50,8mm)

Husky 2150 Metal 2" (50,8mm)

Husky 3300 Plastic 3" (76,2mm)

Husky 3300 Metal 3" (76,2mm)

Graco PMG Buyers GuideFeatures & Bene�tsOil Pump Reference

Model Annual Usage

Fast Ball, 1 : 1 5,000 gal (19,000 L)

LD Series, 3 : 1 20,000 gal (75,000 L)

LD Series, 5 : 1 20,000 gal (75,000 L)

Mini Fire Ball 225, 3 : 1 30,000 gal (75,000 L)

Fire Ball 300, 5 : 1 35,000 gal (132,000 L)

Fire Ball 425, 3 : 1  >35,000 gal (132,000 L)

Fire Ball 425, 6 : 1 >35,000 gal (132,000 L)

Fire Ball 425, 10 : 1 >35,000 gal (132,000 L)

Dura Flo, 6 : 1 >35,000 gal (132,000 L)

Dura Flo, 10 : 1 >35,000 gal (132,000 L)

Dura Flo, 12 : 1 Carbon Steel 

Or Dura Flo, 12 : 1 Stainless Steel

>35,000 gal (132,000 L)

Dura Flo, 23 : 1 >35,000 gal (132,000 L)

High Flo, 3.5 : 1 >35,000 gal (132,000 L)

High Flo, 4.5 : 1 >35,000 gal (132,000 L)

High Flo, 6 : 1 >35,000 gal (132,000 L)

 

Grease Pumps Quick Reference

Model Annual Usage

LD Series, 50 : 1 7,000 lb (3,125 kg)

Mini Fire Ball 225, 50 : 1 10,000 lb (5,535 kg)

Fire Ball 300, 50 : 1 10,000 lb (5,535 kg)

Fire Ball 425, 50 : 1 20,000 lb (9,072 kg)

Fire Ball 425, 75 : 1 20,000 lb (9,072 kg)

Fire Ball 300, 15 : 1 10,000 lb (5,535 kg)

Fire Ball 425, 10 : 1 20,000 lb (9,072 kg)

Check Mate, 14 : 1 20,000 lb (9,072 kg)

Check Mate, 26 : 1 20,000 lb (9,072 kg)

Check Mate, 29 : 1 20,000 lb (9,072 kg)

Check Mate, 55 : 1 20,000 lb (9,072 kg)

Check Mate, 63 : 1 20,000 lb (9,072 kg)

Check Mate, 68 : 1 20,000 lb (9,072 kg)

SaniForce Equipment CatalogFeatures & Bene�tsSaniForce Equipment 

Model Max. Flow Rate

SaniForce 515 16 gpm (61 lpm)

SaniForce 1040 40 gpm (151 lpm)

SaniForce 1590 90 gpm (340 lpm)

SaniForce 2150 150 gpm (568 lpm)

SaniForce 1590HS 90 gpm (340 lpm)

SaniForce 3150HS 150 gpm (568 lpm)

SaniForce 1590 3A 90 gpm (340 lpm)

SaniForce 3150 3A 150 gpm (568 lpm)

SaniForce Meat/Poultry 150 gpm (568 lpm)

SaniForce 2 : 1 1.5 gpm (5.7 lpm)

SaniForce 6 : 1 4 gpm (15 lpm)

SaniForce 5 : 1 14 gpm (53 lpm)

SaniForce 12 : 1 8.5 gpm (32 lpm)

Centrifugal Pump EA Series - 50HzFeatures & Bene�ts

Flow Rate 2-1100 m3/h

Pressure 10 Bar

Total Head 2-150m

 

 

 

MAXIPUMPSPlease ll the inquiries form to send your questions related to our products and services.

Gear Oil PumpsFeatures & Bene�ts

MODEL SIZE 

(INCH)

FLOW

(L/MIN)

PRESSURE

(MPA) 

 M6001  ¾"  18.3 1.45

 M6002  1"  55 0.33

 M6003  1½" 83.3 0.33 

 M6004  2" 200  0.33

 M6005 3" FLANGE THREAD 300  0.36

 M6006 4" FLANGE THREAD 633  0.28 

CYLINDERSSERIES OF CYLINDERS :

Single Acting :StandardCompactLow Pro leAutomotiveCenter HolePump & Cylinder Kits

Double Acting :StandardHeavy DutyCenter HolePump & Cylinder Kits

Custom 

Features & Bene�tsTHE DIFFERENCE IS THE STANDARD FEATURES :

High-strength steel constructionStop rings to prevent plunger over travelSolid bronze gland nuts for smoother operationHigh cycle life Buna-N sealsHigh ow couplersCollar threads are designed to carry full loadBurnished cylinders decrease frictionPrecision ground, chrome-plated plungersSolid bronze wear rings increase product lifeHeavy-duty return springs provide consistent performance

RAM PACRam-Pac components are designed to withstand heavy usage, repeated impacts, intense shocks and other environmental and work sitconditions unique to this industry.Ram-Pac we build standard hydraulic components meant to withstand these harsh conditions. We provide a variety of sizes for many oour products ranging from large to small so we will help you meet the challenging parameters of your industry. Please ll the inquiries form to send your questions related to our products and services. 

HOSES OR ADAPTORSERIES OF HOSES OR ADAPTOR :

CouplersGaugesHoses

Features & Bene�tsHose Assemblies For trouble-free operation and ease of set-up.Rated to 10,000 psi working pressureMeet Material Handling Institute IJ-100 speci cations.Constructed of synthetic rubber core tube with two-wire braid reinforcement and synthetic rubber cover.Consult factory for longer lengths.

HYDRAULIC JACKSFeatures & Bene�tsHigh-quality, industrial hydraulic jacks handle a wide range of construction, rigging, and other applications.

Made in U.S.A.Lifting starts with rst stroke of handle.Extension screws in all 3 thru 12-ton models.Cast head nut is made of durable grey iron.Ram is electroless nickel-plated.Cast ductile iron base on 3thru 20-ton jacks.30-ton jack has a machined steel base.All jacks feature a uid by-pass and a stop ring to prevent over-travel.12, 20, and 30-ton jacks come with carrying handle.

MAINTENANCE KITSSERIES OF MAINTENANCE KITS :

4-Ton Kit10-Ton Kit20-Ton Kit

Features & Bene�tsComplete, pre-assembled kits especially designed to handle demanding maintenance tasks.

Select from three sizes determined by capacity of cylinder, 4, 10, and 20-ton.Each kit contains a single-acting cylinder, hand pump, 6-feet of high-pressure hose, couplings and accessories.Includes heavy-duty, easy-to-carry storage box. 

NOTE:The use of plunger toe, collar toe and other accessories reduces lifting capacity by one-half. WARNING:To avoid buckling and sliding out from Under load, use only one extension tube per cylinder.

PUMPSSERIES OF PUMPS :

ElectricHand PumpAir PumpGasolinePumps and Cylinder SetsPower Pump Accessories

Features & Bene�tsSELECTING THE CORRECT RAM-PAC® HIGH PRESSURE HYDRAULIC PUMP.RAM-PAC® hydraulic pumps are available in several models. Each has individual performance characteristics and is designed to meet speci capplications. Selecting the correct pump for your application is easier when you consider the following questions: How is the pump powered?Power is supplied either manually or by an electric, universal electric, air or gas motor. How big a reservoir do I need?Usable oil is the oil available to the system once it has been bled and the pump reservoir has been lled to its proper level. You must considereservoir size and usable oil capacity to be sure the pump you select has suf cient capacity to extend all of the cylinder(s) in your hydraulic

system to full stroke. What pump ow is best for my application?Pump ow is measured in cubic inches/stroke in manual pumps and cubic inches/minute in power pumps. The greater the ow, the faster thecylinder will extend. Some pumps have two-speeds or stages. In the low-pressure rst stage ow is greater as the plunger approaches theload. When the cylinder reaches the load, the second or high-pressure stage is automatically engaged for uniform operation Which valve is needed?Different valves are available in both manual and solenoid control to direct oil to and from your single-acting or double- acting cylinder. (Fodetails on hydraulic valves, see pages ?)

HYDRAULIC SPREADERSFeatures & Bene�tsHydraulic spreaders deliver up to one-ton rated load from the beginning of stroke.

Powerful spreader arms deliver 100% rated load from the start.Lightweight and portableQuick-connect coupling for fast setup.

VALVESSERIES OF VALVES :

Manual :RemotePump Mounted

Standart :RemotePump Mounted

 

Features & Bene�tsOperate ef ciently at high and low pressuresHand-Operated Pressure can be adjusted from 1,000 to 10,000 psiPolished steel control rotor and bronze spools for long life and consistent operationModels for use with both single-acting and double acting cylindersField interchangeable on HP-520 (manual) and HP-560 (electric) series pumps

VP2Features & Bene�tsVP2 Series Performance RangeTempDependant On Shaft seal and O- ring material. See table below :

Capacity Up to 75 LPM Up to 20 GPM

Press To 8.5 Bar To 125 PSI

Visc 1 to 5,500 cSt 28 to 25,000 SSU

*Buna (-29 to 107 C) (-20 to 225 F)

VIC PUMPSPlease fill the inquiries form to send your questions related to our products and services.

*Viton (-29 to 175 C) (-20 to 350 F)

 VP3 Series Performance RangeTempDependant On Shaft seal and O- ring material. See table below :

Capacity Up to 75 LPM Up to 20 GPM

Press To 8.5 Bar To 125 PSI

Visc 1 to 5,500 cSt  28 to 25,000 SSU

*Buna (-29 to 107 C) (-20 to 225 F)

*Viton (-29 to 175 C) (-20 to 350 F)

 

NS365Features & Bene�tsUsed for acetone, Ethanol, methanol, anhydrous ammonia, anti-freeze, benzene, boric acid, detergents, diesel fuel, ethylene glycol, fuel oils,glycerin, kerosene, lacquers, toluene, turpentine and urea (DEF). Fits 15-55 gallon drums Dispenses 1 gallon per 8 lifts Nylon construction with Te on seals and stainless steel rod Comes with 2" bung adaptor

CHEMICAL PUMPPlease ll the inquiries form to send your questions related to our products and services.

LUBTECHPlease ll the inquiries form to send your questions related to our products and services.

OIL BUCKET PUMPFeatures & Bene�ts

Ideas for transferring transmission differential & heavier oils.Wear Resistant Brass Piston Rings.Rugged Steel Pump, Drum Cover & Drum.Variable Handle Setting for use with oil of different viscosities.Complete with 48" PVC hose with curved steel discharge spout.Deliver upto 125 ml (4.64 oz) per stroke.Do Not Use with water based & other corrosive media.Capacity : 16 litre (4.3 gl)

GREASE BUCKET PUMPFeatures & Bene�ts

High Pressure-High Volume Grease Pump for everyday greasing on earth moving, farm & automotive equipment. Adjusment handle setting for use with grease of varying viscosity.Includes Steel Bucket with wheel, Rubber Lined, Follower Plate, 2m x 1¼" ID High Pressure Hose, Grease handle with coupler.Develop upto 9 gms / strokeFor use with NLGI 1,2 & 3 Greases.Capacity : 15 kg (33 lb.)

Electric Diesel Pump 12V DCFeatures & Bene�ts

Portable Diesel transfer pumps designed for everyday use in Agricultural, Construction, Automotive & Industrial applications.Lightweight, yet strong non corroding Aluminum Die Cast ConstructionSelf priming Vane pump design.Internal Bypass Valve: In case of shutting off the outlet, it will relieve pressure to save pump from damage upto 3 min.Recommended use with Diesel & Kerosene.Flow rate: 46LPMDuty Cycle: 30 Minutes On /30 Minutes Off.Available in a choice of :

a. DC Version: 12V or 24 Vb. AC Version: 115V or 220 V

Warning: Do not use Fluids with a ash point below 100°C (38°C), such as Gasoline & Alcohol. Sparking could result in explosion causing fatainquiry.

Electric Diesel Pump 24V DCFeatures & Bene�ts

Portable Diesel transfer pumps designed for everyday use in Agricultural, Construction, Automotive & Industrial applications.Lightweight, yet strong non corroding Aluminum Die Cast ConstructionSelf priming Vane pump design.Internal Bypass Valve: In case of shutting off the outlet, it will relieve pressure to save pump from damage upto 3 min.Recommended use with Diesel & Kerosene.Flow rate: 46LPMDuty Cycle: 30 Minutes On /30 Minutes Off.Available in a choice of :

a. DC Version: 12V or 24 Vb. AC Version: 115V or 220 V

Warning: Do not use Fluids with a ash point below 100°C (38°C), such as Gasoline & Alcohol. Sparking could result in explosion causing fatainquiry.

FILLRITE

FR112CLCast aluminum Fill-Rite pump provides smooth, continuous transfer of medium viscosity liquids, as well as oil, gasoline and diesel fuel.Improved seal keeps water out. Built-in check valve and strainer. Pump easily mounts to a standard drum with 2in. NPT. Anti-siphoning device,hose with static wire and a 20 in. to 34 3/4 in. telescoping suction pipe. Padlockable pump can be set up for reverse ow and is adaptable fordrums, kegs or storage tanks. U.S.A.

Features & Bene�tsSpeci cations :

37 Liters per 100 RevolutionsUL ApprovedCounter (Liter)Can be Used to Pump in Reverse DirectionCast Iron Aluminum Body

RD812 - Pump OnlyFeatures & Bene�ts18 gpm

FR311High Flow AC Utility Rotary Vane Pumps. With a ow rate few pumps can match. the FR311VLB has an open ow rate of 30 GPM. This pumpprovides long life. Explosion-proof UL listed dual voltage 3/4 HP motor (115 and 230 VAC). Motor has sealed bearings, heavy-duty switch andthermal overload protection Built-in junction box Cast iron pump housing with iron rotor and carbon vanes Check valve, pressure relief valveand strainer assembly, Automatic bypass valve, 2 in. threaded bung for tank openings. Includes 901L Meter, 18 ft. hose and 1 in. AutomaticUltra High Flow Nozzle and 2-Year Warranty.

Features & Bene�tsSpeci cations :

30 GPM (113 LPM)3/4 HP motorUL/cUL listed pump and motorCompatible with gasoline, diesel, B20, E-15, and keroseneHeavy duty cast iron construction2 year warranty2 in. threaded bung for tank openingsIron rotor with carbon rotary vanesSelf primingCheck valve, pressure relief1 in. ultra high ow nozzle1 in. x 18 ft. hose with static wire901L liter mechanical meter

FR701This rugged, positive displacement, Heavy Duty pump is UL listed. Explosion proof UL listed 1/3 HP motor (115 VAC-60Hz) with sealedbearings, Heavy Duty switch, thermal overload protection and junction box. Carbon vanes and ceramic/carbon seals reduce wear and repairexpense. Integral check valve with pressure relief on outlet side reduces pressure drop and improves vertical lift. Easy removable strainer,automatic bypass valve, 2 in. threaded bung for tank openings.

Features & Bene�tsSpeci cations :

Tuthill Transfer Systems offers a wide range of fuel transfer pumps that provide rugged, reliable fuel transfer that dispenses uidquickly, safely and accurately. Developed to operate in the most severe construction working environments, you can be assured thathese pumps don't quit so workers spend less time fueling their heavy industrial equipment and more time getting the job done. Please ll the inquiries form to send your questions related to our products and services. 

15 GPM (57 LPM)1/3 HP motorUL/cUL listed pump and motorHeavy duty cast iron constructionCompatible with diesel, gasoline, kerosene, E15 and biodiesel up to B202 year warranty2 in. threaded base for tank mountingIron rotor with carbon rotary vanesSelf primingCheck valve, pressure relief valve, and strainer Included3/4 in. x 12 ft. hose with static wire807C mechanical meterManual nozzle

FR1211This industry standard DC pump dispenses up to 15 GPM (57 GPM). The FR1211GL is ideal for pumping gas, diesel fuel and kerosene. With anamp draw that's easy on your DC power source. Explosion-proof UL/cUL listed 1/4 HP motor. The FR1211GL comes complete with and 807CLmeter, 12 ft. static wire hose and manual nozzle.

Features & Bene�tsSpeci cations :

Up to 15 GPM1/4 HP motorUL/cUL listedDiesel, Gasoline, Kerosene, E15, Biodiesel up to BD202 year warranty2 in. threaded base for tank mountingHeavy duty cast iron constructionCast bronze rotor with bronze rotary vanesBuilt-in strainer 12 ft. hose with static wire807CL meterReplaces FR1211CL

FR2411This industry standard DC pump dispenses up to 57 GPM. The FR2411GL is ideal for pumping gas, diesel fuel and kerosene. With an amp drawthat's easy on your DC power source. Explosion-proof 1/4 HP motor. The FR2411GL comes complete with a 807CL Mechanical Meter, 12 instatic wire hose and manual nozzle.

Features & Bene�tsSpeci cations :

56 LPMUL, cUL, ANZEx motor approvedHeavy duty cast ironCompatible with Diesel, Gasoline, Kerosene, E15, Biodiesel up to B202 year warranty2 threaded base for tank mountingCast bronze rotor with bronze rotary vanesBuilt in strainer12' hose with static wireManual nozzle807CL mechanical meterReplaces FR2411CL

FR1612The Fill-Rite diesel fuel transfer pump delivers diesel fuel or antifreeze. Not to be used for dispensing gasoline, alcohol, or waste vegetable oito be used for Biodiesel fuel.

Features & Bene�tsSpeci cations :

10 GPMDiesel and Antifreeze30 minute duty cycle1 year warrantySelf priming Bypass valve and lip seal for leak protectionCast iron body

20 AMP1/5 HP motor

SERIES 11Features & Bene�tsThis seies of Ranger pumps are designed to output 11 Gallons per revolution at a maximum of 750 rpm and generate up to 80 gallons perminute. These pumps are offered in 90° , 2" NPT tapped port model and a 180º model with 2" anges.

SERIES 17Features & Bene�tsThis series of Ranger Pumps are designed to output 17 gallons per revolution at a maximum of 750 rpm and generated up to 126 gallons perminute in a 90° model with 2" or 2.5" anges and in a 90° model with 2" NPT tapped ports.

SERIES 22Features & Bene�tsThis series of Ranger Pumps are designed to output 22 gallons per revolution at a maximum of 750 rpm and generate up to 165 gallons perminute. These pumps are offered in 90° and 180° with 3" and 4" anges.

SERIES 48Features & Bene�tsThis series of Ranger Pumps are designed to output 52 gallons per revolution at a maximum of 900 rpm and generate up to 460 gallons perminute. These pumps are offered in a 90° model with 3" and 4" anges.

RANGER PUMPSThis series of Ranger Pumps is designed to operated at reduced motor speeds. This allows the pump to operate equally well for bothdesign and low viscocity liquids.

SERIES 11 180° PORTED HOUSINGFeatures & Bene�tsRanger now offers the 11 series with 180° ports and 2" NPT anges. This is a good choice when your plumbing does not accomodate the 90°port model. It is available with the standart RV, Double RV and plain endplate. It is also available with the HB, HH and GB models.

BI-ROTATIONAL DOUBLE RELIEF VALVEFeatures & Bene�tsRanger now offers a double relief valve for our series 11, 17 and 22 that will provide protection in both shaft rotations. The double relief willcontinue potect from overpressure even when the shaft rotation is changed and the pumps ow is reversed. The double relief is eldadjustable and works similiar to the standard RV

SERIES 48 GEAR REDUCTIONFeatures & Bene�tsRanger now offers an integrated gear reduction unit for the 48 series. It is available in a 4.26:1, 4.88:1 and 5.66:1 ratio. Please refer to page 7for additional information.

S Series Screw PumpsBlackmer S-Series pump is a rotary positive displacement pump. 

Features & Bene�tsWe have two categories :

- Twin Screw Pump

BLACKMER

WTG Series (Twin Screw with Timing Gears)2HE (Horizontal General Twin Screw Pump, WTG)2HC (Twin Screw Pumps, WTG)2HM (Horizontal General Twin Screw Pump, WTG)2VM (Vertical General Twin Screw Pump, WTG)2VE (Vertical General Twin Screw Pump, WTG)2VR (Vertical Twin Screw Pump, WTG)2HR (Horizontal, High Temperature, High-Viscosity Twin Screw Pump, WTG)2HH (High Pressure, Twin Screw Pump, WTG)2H (Single End Twin Screw Pump, WTG)NTG Series (Twin Screw Pump)2LA (Horizontal Twin Screw Pump, NTG)2KA (Vertical Twin Screw Pump, NTG)2LE (Horizontal Twin Screw Pump, NTG)2KE (Vertical Twin Screw Pump, NTG)Multi Phase (Twin Screw Pump)2MPS (Multi-Phase Twin Screw Pump, WTG)

 

- Triple Screw Pump

3N3M3PF

E Series Seal-less Internal Gear PumpsFeatures & Bene�tsThe innovatives seal-less and leak-free design of E Series pumps makes them ideal for handling hazardous chemicals, expensive uids andhard to seal crystallizing, thermosetting or viscous uids in continuous-process applications that may require 24/7 operation.

E Series Pumps excel in the handling of :

AdhesivesBiofuelsChemicalsEdible fats and oilsFoodsHeat-transfer uidsIsocynatesLube oils and grease blendingMolten sulfurPaint and coatings 

ENVIRO GEAR PUMP