connectinggta user guide - ehealth ontario · connectinggta user guide page september 2015 10...
TRANSCRIPT
ConnectingGTA User Guide
Version: 2.0
Date: September 2015
ConnectingGTA User Guide September 2015 Page 2
Table of Contents
Getting Started ..................................................................................................................... 10
Introduction ...................................................................................................................... 10
Accessing ConnectingGTA ................................................................................................... 10
Browser Considerations for ConnectingGTA ........................................................................ 10
HIS Login Instructions ..................................................................................................... 10
ONE ID Login Instructions ................................................................................................ 11
Accepting the End User Agreement ................................................................................... 13
Landing in ConnectingGTA ............................................................................................... 13
Log Out and Time Out ........................................................................................................ 15
Working with ConnectingGTA ................................................................................................ 17
ConnectingGTA Window (ConnectingGTA Framework) ............................................................ 17
Header .......................................................................................................................... 19
Navigation Bar ............................................................................................................... 19
Footer ........................................................................................................................... 22
General Navigation ............................................................................................................ 23
Paging ........................................................................................................................... 25
Data Refresh .................................................................................................................. 26
Managing List Columns .................................................................................................... 27
User Preferences (Configure My Grid) ................................................................................ 38
Loading Data .................................................................................................................. 43
Patient Banner .................................................................................................................. 44
Add or Remove Patient .................................................................................................... 45
Calendar ........................................................................................................................... 46
Viewing Documents ............................................................................................................ 49
Document Size ............................................................................................................... 51
ConnectingGTA User Guide September 2015 Page 3
Document Types ............................................................................................................. 51
Printing ............................................................................................................................... 54
Printing from List Views ................................................................................................... 55
Printing from Document Viewer ........................................................................................ 57
Print Format ................................................................................................................... 58
Find and Select Patients......................................................................................................... 59
My Workspace Tab ............................................................................................................. 59
My Patients List .............................................................................................................. 59
My Recent Patients List .................................................................................................... 61
Find a Patient .................................................................................................................... 64
Search by HCN ............................................................................................................... 65
Search by MRN/CHRIS Client # ........................................................................................ 66
Advanced Search ............................................................................................................ 66
Select a Patient ................................................................................................................. 68
Putting a Patient into Context ........................................................................................... 70
Patient Search Results Preferences ................................................................................... 71
Clinical Data Components ...................................................................................................... 72
Timeline ........................................................................................................................... 72
Timeline Preferences ....................................................................................................... 73
Timeline Control Mechanisms ........................................................................................... 73
Display of Encounters ...................................................................................................... 76
Timeline Relationship to Portlet Dates ............................................................................... 77
Overriding Consent ............................................................................................................ 78
Types of Consent Directives: ............................................................................................... 78
Viewing Unblocked Data Only ........................................................................................... 79
Overriding Consent ......................................................................................................... 79
ConnectingGTA User Guide September 2015 Page 4
Patient Summary Views and Custom Views ........................................................................... 83
Working with Custom Views ............................................................................................. 83
Summary View ............................................................................................................... 92
Summary List View ......................................................................................................... 93
Visits/Encounters and Summary Reports .............................................................................. 93
Documents/Notes .............................................................................................................. 97
Diagnostic Imaging Reports ................................................................................................ 99
Other Results ................................................................................................................... 101
Lab and Pathology Results Portlet ....................................................................................... 104
Introduction to OLIS ...................................................................................................... 104
Condensed Portlet View – Summary View Page ................................................................. 105
Individual Portlet Page - List View and Detail View ............................................................. 106
Flowsheet View.............................................................................................................. 114
OLIS Full Report View ..................................................................................................... 118
Attachments ................................................................................................................. 120
Personalization of the Lab and Pathology Results Portlet ..................................................... 121
Community ...................................................................................................................... 128
Icons .................................................................................................................................. 131
ConnectingGTA User Guide September 2015 Page 5
List of Tables Table 1: Default Number of Rows in Lists and Portlets ............................................................... 26 Table 2: Age Units ................................................................................................................ 34 Table 3: Printing from My Workspace Tab ................................................................................ 54 Table 4: Printing from Patient Care Tab ................................................................................... 54 Table 5: Timeline Relationship to Portlet Dates ......................................................................... 78 Table 6: Visits/Encounters and Summary Reports Data Elements ................................................ 95 Table 7: Types of Reports Displayed per Visit Type ................................................................... 95 Table 8: Documents/Notes Data Elements ............................................................................... 98 Table 9: DI Reports Data Elements ........................................................................................ 100 Table 10: Other Results Data Elements................................................................................... 103 Table 11: Lab and Pathology Results Data Elements, List View .................................................. 109 Table 12: Lab and Pathology Results Data Elements, Result Detail View ..................................... 110 Table 13: Lab and Pathology Results Data Elements, Order Detail View ...................................... 111 Table 14: Lab and Pathology Results Data Elements, Flags ....................................................... 112 Table 15: Lab and Pathology Results, Default Sort ................................................................... 122 Table 16: Lab and Pathology Results, Status Indicators ............................................................ 125 Table 17: Lab and Pathology Results, System Error Messages ................................................... 126 Table 18: Community Data Elements ..................................................................................... 128
ConnectingGTA User Guide September 2015 Page 6
List of Figures Figure 1: ConnectingGTA Landing Page ................................................................................... 11
Figure 2: ONEID Login Page ................................................................................................... 11
Figure 3: Dialog to Specify the User's Organization ................................................................... 12
Figure 4: Notice that End User Agreement has not been Accepted............................................... 13
Figure 5: End User Agreement Options .................................................................................... 13
Figure 6: Patient Care Tab Landing Page .................................................................................. 14
Figure 7: Patient Care Tab Landing Page, with Error .................................................................. 14
Figure 8: Log Out Button ....................................................................................................... 15
Figure 9: Log Out Page .......................................................................................................... 15
Figure 10: Session Time Out Warning ...................................................................................... 16
Figure 11: Log Out Page ........................................................................................................ 16
Figure 12: ConnectingGTA Framework, My Workspace Tab......................................................... 17
Figure 13: ConnectingGTA Framework, Patient Care Tab ............................................................ 18
Figure 14: Header ................................................................................................................. 19
Figure 15: Navigation Bar, collapsed and expanded views .......................................................... 20
Figure 16: Using the Navigation Bar ........................................................................................ 21
Figure 17: Using the Navigation Bar, Different View .................................................................. 22
Figure 18: Footer .................................................................................................................. 22
Figure 19: Condensed Portlet View .......................................................................................... 23
Figure 20: Paging on Portlets ................................................................................................. 25
Figure 21: Paging Button Overview ......................................................................................... 25
Figure 22: Portlet Refresh ...................................................................................................... 26
Figure 23: Timeline Refresh ................................................................................................... 26
Figure 24: Adjusting Column Width ......................................................................................... 27
Figure 25: Drop Down Arrow .................................................................................................. 28
Figure 26: Columns List ......................................................................................................... 28
Figure 27: Locked Columns .................................................................................................... 28
Figure 28: Sorting ................................................................................................................. 29
Figure 29: Drop Down Arrow .................................................................................................. 30
Figure 30: Filters Menu .......................................................................................................... 30
Figure 31: Date Filter Applied ................................................................................................. 31
Figure 32: Date Filter, Range Start ......................................................................................... 32
Figure 33: Date Filter, Range End ........................................................................................... 32
Figure 34: Date Filter, Range Applied ...................................................................................... 33
Figure 35: Age Filtering, Menu ................................................................................................ 33
Figure 36: Age Filtering, Text Box ........................................................................................... 34
Figure 37: Age Filterig, Error Message ..................................................................................... 34
Figure 38: Free Text Filter ..................................................................................................... 35
Figure 39: Free Text Filter Applied .......................................................................................... 35
Figure 40: Selection Filtering .................................................................................................. 36
Figure 41: Remove Filter ....................................................................................................... 37
Figure 42: User Preferences Icon ............................................................................................ 38
Figure 43: Configure My Grid Dialog, Visits/Encounters Condensed View ...................................... 38
Figure 44: Hide Column ......................................................................................................... 39
Figure 45: Hide Column, Successful ........................................................................................ 40
Figure 46: Move Columns ...................................................................................................... 40
Figure 47: Specify Default Sort ............................................................................................... 41
Figure 48: Set Rows .............................................................................................................. 41
Figure 49: Reset to System Defaults Button ............................................................................. 42
Figure 50: Confirm Reset Dialog ............................................................................................. 42
Figure 51: Loading Data ........................................................................................................ 43
ConnectingGTA User Guide September 2015 Page 7
Figure 52: No Data Found ...................................................................................................... 43
Figure 53: Patient Banner, Overview ....................................................................................... 44
Figure 54: Patient Banner, Expanded ...................................................................................... 44
Figure 55: Patient Banner, Collapsed ....................................................................................... 44
Figure 56: Contact and Address Information ............................................................................ 45
Figure 57: MRN Information ................................................................................................... 45
Figure 58: Add/Remove Patient Button .................................................................................... 46
Figure 59: Patient Added Confirmation Message ....................................................................... 46
Figure 60: Calendar Button .................................................................................................... 46
Figure 61: Calendar – Select Date ........................................................................................... 47
Figure 62: Calendar – Change Month ...................................................................................... 47
Figure 63: Calendar – Select Drop Down.................................................................................. 48
Figure 64: Calendar – Select Month/Year ................................................................................. 48
Figure 65: Opening the Document Viewer ................................................................................ 49
Figure 66: Document Viewer Framework ................................................................................. 50
Figure 67: Closing the Document Viewer.................................................................................. 50
Figure 68: Too many matching documents – Visits and Encounters ............................................. 51
Figure 69: Document View with Multiple Tabs ........................................................................... 52
Figure 70: File Download Dialog ............................................................................................. 52
Figure 71: Page Setup Dialog ................................................................................................. 55
Figure 72: Print Icon ............................................................................................................. 55
Figure 73: Print Preview and Print Dialog (Internet Explorer) ...................................................... 56
Figure 74: Document Viewer Print Button ................................................................................ 57
Figure 75: Print Dialog (Internet Explorer) ............................................................................... 58
Figure 76: My Workspace Overview......................................................................................... 59
Figure 77: My Patients List ..................................................................................................... 59
Figure 78: View Button, My Patients List .................................................................................. 60
Figure 79: Trash Button ......................................................................................................... 60
Figure 80: Remove Patient from List Confirmation .................................................................... 61
Figure 81: My Recent Patients List .......................................................................................... 62
Figure 82: View Button, My Recent Patients List ....................................................................... 62
Figure 83: My Recent Patients List Time Span Selection ............................................................. 64
Figure 84: Search for a Patient Button ..................................................................................... 64
Figure 85: Patient Search and Selection Window ....................................................................... 65
Figure 86: Validation Messages............................................................................................... 65
Figure 87: Search by HCN ...................................................................................................... 66
Figure 88: Search by MRN/CHRIS Client # ............................................................................... 66
Figure 89: Advanced Search ................................................................................................... 68
Figure 90: Patient Search Results Table ................................................................................... 68
Figure 91: Expanding the Search Results ................................................................................. 69
Figure 92: No Patient Search Matches ..................................................................................... 69
Figure 93: Error Message - Too Many Results ........................................................................... 69
Figure 94: Error Message - Error with Patient's Record .............................................................. 70
Figure 95: View Selected Patient Button .................................................................................. 70
Figure 96: Timeline (30 days) ................................................................................................ 72
Figure 97: Today Date/Time Indicator ..................................................................................... 72
Figure 98: User Preferences Icon ............................................................................................ 73
Figure 99: User Preferences Selection ..................................................................................... 73
Figure 100: Timeline ............................................................................................................. 73
Figure 101: Fixed Time Intervals ............................................................................................ 74
Figure 102: Custom Time Interval ........................................................................................... 74
Figure 103: Arrow Shaped Chevron ......................................................................................... 75
ConnectingGTA User Guide September 2015 Page 8
Figure 104: Reducing the Selected Time Range ........................................................................ 75
Figure 105: Encounter Selection ............................................................................................. 76
Figure 106: Encounter Legend ................................................................................................ 76
Figure 107: Encounter Tooltip ................................................................................................ 76
Figure 108: Display of Blocked PHI ......................................................................................... 79
Figure 109: Override Consent Button ...................................................................................... 79
Figure 110: Override Consent Dialog ....................................................................................... 80
Figure 111: Consent Override, Option 1 ................................................................................... 80
Figure 112: Consent Override, Option 2 ................................................................................... 81
Figure 113: Consent Override, Option 3 ................................................................................... 81
Figure 114: Viewing Blocked PHI ............................................................................................ 82
Figure 115: Viewing Blocked PHI - Lab and Pathology Results Portlet .......................................... 82
Figure 116: Edit Icon on the Left Navigation Bar ....................................................................... 83
Figure 117: My Views ............................................................................................................ 83
Figure 118: More Button ........................................................................................................ 84
Figure 119: Create Page Dialog .............................................................................................. 84
Figure 120: Select a Template Dialog ...................................................................................... 85
Figure 121: Create Page Dialog .............................................................................................. 85
Figure 122: Add Portlet using the + Button .............................................................................. 86
Figure 123: Add Portlet by Clicking on the Portlet Name ............................................................ 86
Figure 124: Add Portlet by Drag & Drop .................................................................................. 87
Figure 125: Save Button ........................................................................................................ 88
Figure 126: Save Hyperlink within the Portlet ........................................................................... 88
Figure 127: Revert Button ..................................................................................................... 88
Figure 128: View Icon ........................................................................................................... 89
Figure 129: Left Navigation Bar with New View ......................................................................... 89
Figure 130: Left Navigation Bar with Custom View .................................................................... 90
Figure 131: Right Click Menu .................................................................................................. 90
Figure 132: Left Navigation Bar with Custom View .................................................................... 91
Figure 133: Summary View .................................................................................................... 92
Figure 134: Summary List View .............................................................................................. 93
Figure 135: Visits/Encounters and Summary Reports Portlet ...................................................... 94
Figure 136: Too many matching documents ............................................................................. 96
Figure 137: Documents/Notes Portlet ...................................................................................... 97
Figure 138: Diagnostic Imaging Reports Portlet ........................................................................ 99
Figure 139: Other Results Portlet ........................................................................................... 102
Figure 140: Lab and Pathology Results Portlet ......................................................................... 105
Figure 141: Lab and Pathology Reports Portlet, Condensed Portlet View ..................................... 106
Figure 142: Individual Portlet Page, All Tab ............................................................................. 107
Figure 143: Lab Portlet, including Details View ........................................................................ 109
Figure 144: Nature of Abnormality ......................................................................................... 112
Figure 145: Lab and Pathology Results Portlet with Truncated Result ......................................... 113
Figure 146: Full Truncated Result View ................................................................................... 113
Figure 147: Microbiology Tab ................................................................................................ 113
Figure 148: Pathology Tab .................................................................................................... 114
Figure 149: Flowsheet Tab .................................................................................................... 114
Figure 150: Flowsheet Grid View ............................................................................................ 115
Figure 151: Flowsheet Result Hover Over ............................................................................... 115
Figure 152: Flowsheet Test Result Comment ........................................................................... 116
Figure 153: Flowsheet Details Screen ..................................................................................... 116
Figure 154: User Preferences Icon ......................................................................................... 117
Figure 155: Flowsheet User Preferences ................................................................................. 117
ConnectingGTA User Guide September 2015 Page 9
Figure 156: List View, OLIS Full Report Column ....................................................................... 118
Figure 157: Document Viewer, OLIS Full Report ...................................................................... 118
Figure 158: Document Viewer, OLIS Full Report with Attachment .............................................. 119
Figure 159: Document Viewer, Viewing Attachment ................................................................. 120
Figure 160: List View, Attachments Column ............................................................................ 120
Figure 161: Grouping Options................................................................................................ 123
Figure 162: Group by Ordered As .......................................................................................... 123
Figure 163: Group by Test Name ........................................................................................... 124
Figure 164: Group by Flag .................................................................................................... 124
Figure 165: Data Availability Indicator .................................................................................... 125
Figure 166: Community Portlet .............................................................................................. 128
Figure 167: Too many matching documents ............................................................................ 129
ConnectingGTA User Guide September 2015 Page 10
Getting Started
Introduction
ConnectingGTA is central Ontario’s electronic health record that displays content from sources across
Ontario in a single web browser window, using tabs and pages. Data, which includes patient
demographics, visit and encounter data, documents, reports, diagnostic imaging results, lab data
from the Ontario laboratory information system (OLIS) and information from the community sector is
all displayed together in a single solution.
The ConnectingGTA Program team has worked to optimize the solution to meet the needs of the
region. Given the vast range of providers using the solution, each user can customize their views to
meet their needs.
This guide outlines the functionality available up to and including the Fall 2015 release. Functionality
will continue to evolve and expand as needs are identified.
All examples and screenshots contained within this guide are simulated with mock data; no real
patient data is present.
Accessing ConnectingGTA
Users can access the solution through their local Health Information System (HIS), or through One
ID.
All activity performed by users in the solution is logged and the eHealth Ontario Electronic Health
Record (EHR) privacy and security policies require regular audits to be run by privacy officers and the
ConnectingGTA Program team to validate that the system is being used only for providing or assisting
in the provision of healthcare.
Browser Considerations for ConnectingGTA
We recognize that our users may have various Internet Browsers and Operating Systems. We like our
visitors to have the best possible experience on the web when using ConnectingGTA. However, we do
recognize that it is impossible to develop applications that work identically, efficiently and effectively
on all web browsers.
As of October 2015, ConnectingGTA portal is fully tested on IE 8, IE 9, IE 10, IE11 and Chrome
(Version 44). If you experience any issues with browsers or versions not listed above, please contact
ConnectingGTA Service Desk at 1-888-802-1967 so that we can log your issue and look to resolve it
in a future release.
ConnectingGTA User Guide September 2015 Page 11
HIS Login Instructions
Users will have one or more ConnectingGTA icons or links embedded in their HIS system. Users can
click on the ConnectingGTA icon/link to get to the solution. The physical representation of the link
varies greatly from site to site. Users should reference their site’s documentation.
An assertion of the user’s identity and authorization will be passed to the solution. If a user is viewing
a patient’s record in their HIS, clicking on the ConnectingGTA button will open the solution directly to
the patient’s information (patient context is passed to the solution).
ONE ID Login Instructions
The user will access the solution through One ID via a URL (https://portal.connectinggta.ca/pe/p/ql).
Users must click on the Provider Portal Login button on the ConnectingGTA Landing Page.
Figure 1: ConnectingGTA Landing Page
Users must access the solution with their ONE ID credentials:
Figure 2: ONEID Login Page
ConnectingGTA User Guide September 2015 Page 12
Users may also be asked to verify their identity after entering their login ID and password by
answering security questions.
Once a user has been recognized, the user must select the organization under whose authority they
are working:
Figure 3: Dialog to Specify the User's Organization
If the user has authority under only one organization, they will by-pass the selection prompt.
ConnectingGTA User Guide September 2015 Page 13
Accepting the End User Agreement
Users must accept the eHealth Ontario End User Agreement the first time they access the solution.
Figure 4: Notice that End User Agreement has not been Accepted
The user must re-agree to the EUA annually, or whenever a new version of the End User Agreement
is published.
Figure 5: End User Agreement Options
Landing in ConnectingGTA
If a user accesses the solution from their HIS with no patient selected (also referred to as ‘no patient
context’) or using their ONE ID credentials, they will land on the My Workspace tab. Users can
search in the solution for the patient using the ‘Search for a patient’ feature (Select a Patient).
If a user accesses the solution from their HIS with a patient selected, they will land directly on the
Patient Care tab with the selected patient’s data visible (patient is in context).
ConnectingGTA User Guide September 2015 Page 14
Figure 6: Patient Care Tab Landing Page
Note: If no match is found for the patient in the solution, users will land on the Patient Care tab.
Error messages will display to indicate that no match has been found. Users can search in the
solution for the patient using the ‘Search for a patient’ feature (Select a Patient).
Figure 7: Patient Care Tab Landing Page, with Error
Search for a patient
ConnectingGTA User Guide September 2015 Page 15
Log Out and Time Out
To exit the solution:
1. Click on the Log Out button.
Figure 8: Log Out Button
2. After logging out, the user will land on the Log Out page and can close the Internet browser
window. The user must close all browser windows to be fully logged out of the system.
Figure 9: Log Out Page
Note: ONE ID users must close their browser to fully close their active ONE ID session.
The user will be automatically logged out of the solution after 15 minutes of inactivity, or after the
user’s active session exceeds 8 hours.
Log Out button
Close the internet
browser
ConnectingGTA User Guide September 2015 Page 16
3. A warning message to extend the session is displayed before the session times out. If the
user wants to continue working, click Continue Working.
Figure 10: Session Time Out Warning
4. After the session is logged out, the user will land on the Log Out page and can close the
Internet browser window.
Figure 11: Log Out Page
The Log Out page’s main functionality is to inform the user that the session is no longer active.
Users cannot reopen the solution from this page – they must return to their HIS or the ONE
ID Login Page
Users can click the “Please click here to log off” link to end their One ID session as applicable
Users can close the browser or navigate to another webpage
Note: Logging out of the application the solution was opened from (e.g. HIS) does not affect the
logout process for the solution.
Continue Working
Close the internet
browser
ConnectingGTA User Guide September 2015 Page 17
Working with ConnectingGTA
The basic layout of the solution window is illustrated in the following sections.
ConnectingGTA Window (ConnectingGTA Framework)
On the My Workspace tab, the solution can be broken down into three components:
Figure 12: ConnectingGTA Framework, My Workspace Tab
On the Patient Care tab, the solution can be broken down into six components:
1. Header
2. Navigation
Bar
3. Footer
ConnectingGTA User Guide September 2015 Page 18
Figure 13: ConnectingGTA Framework, Patient Care Tab
1. Header
2. Navigation
Bar
6. Footer
3. Patient
Banner
4. Timeline
5. Data portlets
ConnectingGTA User Guide September 2015 Page 19
Header
The header is available throughout the solution.
Figure 14: Header
Component Description
Logo ConnectingGTA Program logo
Patient Search Refer to Patient Search section
External Links Clicking on a link in the header will open a new internet browser tab or
window (depending on browser being used) to display the linked content.
There is no association between the content within the external link and the
solution.
This includes access to:
ConnectingGTA Program Data Summary (outline of data availability for all
ConnectingGTA sites sending data to the CDR and OLIS)
Links to professional organizations (e.g., CPSO)
Links to information about ConnectingGTA (e.g., Collab space, eHealth
Ontario, Canada Health Infoway, MOHLTC, LHINs)
Link to Help content
User Name The user’s first name and last name (as provided from the source system)
will display.
User Organization The Organization from which the user has logged into the solution from will
display (e.g., University Health Network).
Log Out Clicking on this link will log the user out of solution (Log Out).
Navigation Bar
The solution has two tabs, My Workspace and Patient Care.
The Patient Care tab has a navigation bar, which will be displayed in one of two views: collapsed or
expanded. The collapsed view shows only the icons, but the titles are available by allowing the cursor
to hover over the icon. The expanded view includes the titles associated with the icons
ConnectingGTA User Guide September 2015 Page 20
Figure 15: Navigation Bar, collapsed and expanded views
The pages associated with each part of the navigation bar are listed in the following table:
Page Quick Description
Summary View Grid view of all six portlets in a condensed format
Summary List View Consolidated view of all six portlets in full format
Visits/Encounters Display of visits and encounters and summary reports
Documents/Notes Display of non-diagnostic documents and notes
Lab/Pathology Results Display of lab and pathology results provided through
OLIS
Diagnostic Imaging Reports Display of diagnostic imaging reports
Other Results Display of other diagnostic results
Community Display of community data, including CCAC referrals
ConnectingGTA User Guide September 2015 Page 21
To move between the different tabs and pages of the portlet:
1. From the current view, locate the Navigation Bar.
2. Click on the page of interest.
Figure 16: Using the Navigation Bar
1. Locate Navigation Bar
2. Click on
Visits/Encounters to
navigate to the full
Visits/Encounters
portlet.
ConnectingGTA User Guide September 2015 Page 22
3. Land on selected view.
Figure 17: Using the Navigation Bar, Different View
Footer
Access to ConnectingGTA Program information is available in the footer links. This includes:
Terms of Use
Privacy
Feedback Form
Figure 18: Footer
Click on any link to open a new Internet window or tab with the selected content.
Visits/Encounters view
is now displayed
ConnectingGTA User Guide September 2015 Page 23
General Navigation
Within the solution there are portlets, which group together meaningful categories of data. There are
multiple ways of viewing the same portlet:
1. Condensed view of the portlet on Summary View page
Figure 19: Condensed Portlet View
Condensed view of
the
Visits/Encounters
and Summary
Reports portlet
ConnectingGTA User Guide September 2015 Page 24
2. Full view of the portlet on Summary List View page
3. Full view of the portlet on the associated portlet page (e.g., Visits/Encounters and Summary
Reports page)
Use the Navigation Bar to move between views.
Full view of the
Visits/Encounters
and Summary
Reports portlet
Full view of the
Visits/Encounters
and Summary
Reports portlet
ConnectingGTA User Guide September 2015 Page 25
The following sections describe on how to navigate and adjust the view of the lists that reside within
the portlets.
Paging
Paging controls appear at the bottom of patient’s lists (e.g., My Patients list) and data lists (e.g.,
Visits/Encounters portlet).
Figure 20: Paging on Portlets
Figure 21: Paging Button Overview
Click an arrow to move in that direction, or change the page number and press Enter on your keyboard
to go to a specific page.
The number of rows that appear by default (before paging begins) depends on what type of portlet is
being used, here is a summary:
Portlet Default Number of Rows
Visits/Encounters and Summary Reports 5
Community 5
Documents/Notes 10
Diagnostic Imaging Reports 10
Other Results 10
Lab N/A
My Patients List 10
ConnectingGTA User Guide September 2015 Page 26
Portlet Default Number of Rows
My Recent Patients List 10 Table 1: Default Number of Rows in Lists and Portlets
Paging applies only when there is more than one page of data. If there is only one page of data, the
controls appear but are disabled. Likewise, controls are disabled when there is no more data in that
direction (e.g., ‘Go to previous page’ is disabled on Page 1).
Note: paging is not employed in the Lab and Pathology Results portlet.
Data Refresh
1. To refresh the list or portlet, click the Refresh button beside the paging controls.
Figure 22: Portlet Refresh
2. To refresh the solution, click the Refresh button beside the Timeline.
Figure 23: Timeline Refresh
3. To refresh the web browser window, click the Refresh button beside the web address (URL).
Click Refresh
Click Refresh
Click Refresh
ConnectingGTA User Guide September 2015 Page 27
Managing List Columns
A user can quickly change display properties of most lists. When a list of items is first displayed, the
system uses the defaults as configured by the administrator. Changing display settings as described
below are temporary and will not be saved when navigating away from the page. To make a change
that persists, see the User Preferences.
Temporary preferences available are:
Adjust the column width
Hide or display columns
Sort the list by most columns in ascending or descending order
Filtering data in columns
Column Width
When a value is too long to fit within the column of either a patient list or portlet data list, an ellipsis
(…) appears in the column to indicate there is additional data. To see more data or simply adjust the
size of the column:
1. Hover the pointer over the right edge of the column heading until the adjuster appears.
Click and drag the adjuster left or right.
Figure 24: Adjusting Column Width
Adjuster for Test
column
ConnectingGTA User Guide September 2015 Page 28
Hide or Show Columns
To temporarily hide or show columns in a portlet:
1. Hover the pointer over any column header until the drop down arrow ▼ appears. Click on the
arrow to display the menu.
Figure 25: Drop Down Arrow
2. Hover over Columns to show the columns list.
3. Un-check/check the boxes to hide/show the desired columns in the list. Click anywhere
outside the menu to close.
Figure 26: Columns List
Note that some columns, as defined by the ConnectingGTA Program, cannot be hidden from the list
display – they will appear visibly disabled.
Figure 27: Locked Columns
1. Hover over the
Columns menu
item 2. Un-
check/check
boxes to
hide/show
columns
Only the Source
column can be
modified in this list
ConnectingGTA User Guide September 2015 Page 29
Sorting
When first displayed, list data will be sorted by the specified default column in either ascending or
descending order. This is identified by a small arrow in the specified column header.
To change the sort direction, or sort on a different column, use either of the following methods:
A. Click the column heading, which sorts the column in ascending order. If the column is
already in ascending order, click the column heading to sort the column in descending
order. In other words, clicking the column heading acts as a toggle to sort between
ascending and descending order.
B. Using the menu:
1. Hover the pointer over the column header until the ▼ drop down arrow appears.
2. Click on the arrow to display the preferences menu.
3. Select to either Sort Ascending (A-Z and 0-9) or Sort Descending (Z-A and 9-0).
Figure 28: Sorting
Filtering (Apply a Filter)
On columns where filtering is available, the data within the column can be filtered to show only
certain types of data. If the column allows filtering, it is available from the preferences menu in the
column header.
To filter a column:
1. Hover the pointer over the column header until the drop down arrow ▼ appears.
2. Click the arrow to display the preferences menu.
3. Hover over Filters to show the filter selection list. The type of filter available will be dependent
on the data type of the column: Date, Age, Free Text or Selection.
1. Click the arrow to display
menu
2. Click Sort
Ascending or Sort
Descending
ConnectingGTA User Guide September 2015 Page 30
Figure 29: Drop Down Arrow
Note: Filters can be applied to multiple columns at the same time.
A. Date Filtering
This method is used for any column containing date data:
1. Hover the pointer over Before, After or On to display the calendar.
Figure 30: Filters Menu
Hover over Before,
After or On to
display the
calendar
Click arrow to
display the
menu
ConnectingGTA User Guide September 2015 Page 31
2. Click a date (e.g., Nov 28 2013) on the calendar or click Today. The solution will automatically
check both required boxes to apply the filter (e.g., Filters and Before are both checked). The
solution filters the column data immediately.
Figure 31: Date Filter Applied
3. To close the menu, click anywhere outside of the menu.
To apply a filter range (e.g., from Dec 16 2013 to March 10 2014):
1. With the filter menu displayed, hover the pointer over After.
2. Specify the desired start date of the range (e.g., Dec 16 2013) by selecting one day prior to it
on the calendar (e.g., Dec 15 2013). The solution filters the column data immediately and the
menu will close.
Click a date or
Today on the
calendar to apply
the filter
ConnectingGTA User Guide September 2015 Page 32
Figure 32: Date Filter, Range Start
3. With the filter menu displayed, hover the pointer over Before.
4. Specify the desired start end of the range (e.g., Mar 10 2014) by selecting one day after it on
the calendar (e.g., Mar 11 2014). The solution filters the column data immediately and the
menu will close.
Figure 33: Date Filter, Range End
Use the After selection
to specifying the start
of the range.
Use the Before
selection to specify the
end of the range.
ConnectingGTA User Guide September 2015 Page 33
5. Data is filtered to the specified range.
Figure 34: Date Filter, Range Applied
B. Age Filtering
This method is applied on any Age column in the solution.
1. Hover the pointer over Filters.
2. Hover the pointer over Older Than, Younger Than or Aged to display the text box.
Figure 35: Age Filtering, Menu
3. Enter the filter criteria (age and unit) into the text box. The solution will automatically check
both required boxes to apply the filter (e.g., Older Than and Filters are both checked). The
solution filters the column data immediately.
Filtered to a date
range.
Hover over Older
Than, Younger Than
or Aged to filter
ConnectingGTA User Guide September 2015 Page 34
Figure 36: Age Filtering, Text Box
Note: Filter criteria must include the age and the unit. Valid units are listed in the table
below. If unit is not included, the menu will close but the filter will not be applied.
Unit Description
Y Years
M Months
W Weeks
D Days
Table 2: Age Units
Figure 37: Age Filtering, Error Message
Type filter criteria: age
and unit
ConnectingGTA User Guide September 2015 Page 35
C. Free Text Filtering
This method is employed on the majority of columns in the solution. The user can define the filter
criteria by typing text directly into the free text box.
1. Hover the pointer over Filters.
2. Enter text (filter criteria) into the box.
Figure 38: Free Text Filter
3. As soon as a user starts typing, the solution automatically checks the Filters box and the filter
is applied to the column data.
Figure 39: Free Text Filter Applied
Type filter
criteria in text
box
Test column is
filtered by ‘glu’
box
Column heading changes to
show that a filter is active
box
ConnectingGTA User Guide September 2015 Page 36
4. To close the menu, click anywhere outside of the menu.
D. Selection Filtering
This method is employed on certain columns where the filtering options are restricted. For this
release, the only column it applies to is the Flag column within the Lab and Pathology Results portlet.
1. Hover over the Filters menu and click the appropriate selection.
2. The filter is immediately applied to the column and the menu closes.
Figure 40: Selection Filtering
E. Checkbox Filtering
This method is employed on certain columns where the filtering options are fixed values. For this
release, the only column it applies to is the Test Result Status column within the Lab and Pathology
Results portlet.
1. Hover over the Filters menu and click the appropriate selection(s).
2. The filter is immediately applied to the column and the menu closes.
Figure 41: Checkbox Filtering
Flag column is
filtered to only
display Abnormal
results
Test Result Status
column is filtered to only
display ‘Final’, ‘Amended’
and ‘Preliminary’ results
ConnectingGTA User Guide September 2015 Page 37
Filtering (Remove a Filter)
To remove a filter:
1. Display the Filters list the same way as previously and unselect the check box. The filter criteria
will still be displayed, but the filter is not applied if the Filters checkbox is not selected.
Figure 41: Remove Filter
Note: when de-selecting a date filter, it is the primary Filters checkbox that must be de-selected (not
the After, Before, or On checkboxes).
Filters checkbox
must be clear for
filter to be removed
ConnectingGTA User Guide September 2015 Page 38
User Preferences (Configure My Grid)
The solution displays patient lists (My Workspace tab) and patient data (Patient Care tab) according
to system-wide defaults. Most of these defaults can be modified using the User Preferences icon
that is represented on each list/portlet. When changing settings here they will be saved for future
logins.
To configure the list (or portlet grid) by applying user preferences:
1. Click the User Preferences icon in the top right corner of the portlet or list title bar.
Figure 42: User Preferences Icon
2. This opens the ‘Configure My Grid’ dialog box. To apply changes to the portlet, click the
Save button .
Figure 43: Configure My Grid Dialog, Visits/Encounters Condensed View
User preferences available are:
Modify columns – hide/display
Modify columns – change display order
Change default sort
Set content area height
Reset to system defaults
Click the User
Preferences icon
Click Save to
apply any
changes to the
view
ConnectingGTA User Guide September 2015 Page 39
User preferences will be available in all portlets, on both the summary views and the individual
portlet views. These preferences are unique to each portlet (including each tab within a portlet), as
they are all independent from each other.
Any changes made to any portlet in the Summary View are unique to that view. For example,
changing the configuration of the Documents/Notes portlet in the Summary View will not affect the
configuration of the Documents/Notes portlet in either the Summary List View or the individual
portlet view.
Any changes made to a portlet in the Summary List View will also be reflected in the same portlet in
the individual portlet view. For example, changing the configuration of the Documents/Notes portlet
in the Summary List View will make the same change in the Document/Notes individual portlet view.
Modify Columns – Hide/Display
1. Select a column in the Displayed Columns list.
2. Click Hide.
Figure 44: Hide Column
This will move the column to the Available Columns list and hide it from display. The reverse
action can also be taken to display a hidden column in the list.
1. Select
column from
the list
2. Click Hide
ConnectingGTA User Guide September 2015 Page 40
Figure 45: Hide Column, Successful
Note: Columns with a lock icon beside them cannot be removed from the list.
Modify Columns – Change Display Order
1. Select a column in the Displayed Columns list.
2. Click Move Up or Move Down to adjust the position of the column.
Figure 46: Move Columns
This will move the position of the column in the displayed list.
1. Select
column from
the list
2. Click Move Down
to change the
position of the
column in the view
Organization
column will no
longer be
displayed in the
portlet
ConnectingGTA User Guide September 2015 Page 41
Change Default Sort
1. Select a column from the Default Sort Column drop down list to change the column which is
used as the default sort.
2. Specify if the default sort is ascending or descending.
Figure 47: Specify Default Sort
Set Content Area Height
1. In the Content Area Height (Rows) box, specify the number of rows to display per page in
the list.
Figure 48: Set Rows
Once applied, paging will be employed to see all results that don’t fit on the first page. For the list of
default number of rows by portlet, see Paging.
1. Select column
from the list
2. Specify whether sort
should be ascending or
descending
ConnectingGTA User Guide September 2015 Page 42
Reset to System Defaults
1. Click Reset to System Defaults button.
Figure 49: Reset to System Defaults Button
2. When prompted, select Confirm Reset to return to the list view with all defaults in place.
Figure 50: Confirm Reset Dialog
Click to reset the
system default
configuration
Click Confirm Reset
ConnectingGTA User Guide September 2015 Page 43
Loading Data
Note: this applies to CDR portlets only. Behaviour for Lab and Pathology Results is described Lab
and Pathology Results: Data Availability Indicators.
The user will know that data is loading, by:
1. ‘Loading…’ bar that appears at the bottom of the portlet
2. ‘Processing’ icon that replaces the ‘refresh’ icon.
Figure 51: Loading Data
When the query has been successfully executed but there is no data to display, a ‘No Data Found’
message will display directly in the portlet.
Figure 52: No Data Found
If errors are encountered while loading data, a yellow banner will appear at the top of the portlet to
indicate this to the user (“One or more data sources reported a problem retrieving data. Not all
results may be shown.”). A “transaction ID” will be appended to the end of the error message – this
may be required if you are reporting an issue to the Help Desk.
1. Loading bar
2. Processing icon
No data found No data found
ConnectingGTA User Guide September 2015 Page 44
Patient Banner
The patient banner identifies the current patient and appears at the top of every page containing
patient-specific information (i.e., not available on My Workspace). The patient banner displays both
patient demographic information and contact information. The patient banner will display in either a
concise collapsed view or more detailed expanded view.
Figure 53: Patient Banner, Overview
On the patient banner, the following actions can be performed:
1. Expand or collapse the patient banner, by clicking the chevron icon . By default, the patient
banner will be expanded.
Figure 54: Patient Banner, Expanded
Figure 55: Patient Banner, Collapsed
2. Add/remove the patient to/from My Patients List, see Add or Remove Patient.
3. View truncated data appearing in a hover over. When there is more information for a field, the
field appears as a link (blue text) and/or contains an … (ellipsis). Hover the pointer over the field
to show all the data in a tool tip.
Patient date of birth,
age and gender
Patient address and
phone number (hover
over to see detail)
Patient Health Card Number
Patient Medical Record
Number or CHRIS Client
Number (hover over to see
detail)
Patient name: Last, First,
Middle (if available)
Click the chevron icon
to collapse the patient
banner
Click the chevron icon to
expand the patient banner
ConnectingGTA User Guide September 2015 Page 45
Hover the pointer over the Contact & Address field to see the full set of information
Note: The display of patient contact information is dependent on the organization the user is
logged into the solution with.
1. If the patient’s contact information was captured by the same organization that the user is
logged in under, the patient’s contact information will be displayed in the patient banner.
2. If the patient’s contact information was captured by a different organization than the one
the user is logged in under, the patient’s contact information will appear blank in the
patient banner
Figure 56: Contact and Address Information
Hover the pointer over the MRN field to see full set of patient IDs. Note that the ID displayed directly
on the patient banner should be the ID associated with the Organization the user is currently working
under the authority of. If the patient does not have an MRN for the organization the user is working
under, the most recent MRN will be displayed.
Figure 57: MRN Information
Add or Remove Patient
To add the current patient to a patient list, or remove the current patient from a patient list, use the
add or remove current patient feature.
1. Click the Add/Remove Patient button to open a tooltip containing available patient lists
ConnectingGTA User Guide September 2015 Page 46
Lists that are checked indicate the current patient is on that list
Lists that are not checked indicate the current patient is not on that list
2. Check or clear the box
To add a patient to a list, check the list’s check box
To remove a patient from a list, clear the list’s check box
3. Click Done.
Figure 58: Add/Remove Patient Button
The solution adds or removes the patient, closes the patient list tooltip and displays a confirmation
message.
Figure 59: Patient Added Confirmation Message
Calendar
Where entry of a date is required in the solution, two methods are available: type the date directly
into a date field or use the calendar widget (if available for the field).
Figure 60: Calendar Button
A. Select a date within the current month:
1. Click the button to
access options
2. Check or clear
the box
3. Click Done
ConnectingGTA User Guide September 2015 Page 47
1. Click on the appropriate date directly on the displayed calendar or select the Today button. The
calendar closes automatically and puts the selected date in the date field.
Figure 61: Calendar – Select Date
B. Select a date in a different month:
1. Click the previous or next arrow to step through the calendar one month at a time.
2. Click on the appropriate date. The calendar closes automatically and puts the selected
date in the date field.
Figure 62: Calendar – Change Month
C. Select a date in a different month and/or year:
1. Click the drop-down to open the month/year selector
Click directly on
the appropriate
date or Today
1. Use the arrows to
move through the
calendar one month
at a time
2. Click the
appropriate date
ConnectingGTA User Guide September 2015 Page 48
Figure 63: Calendar – Select Drop Down
2. Use the previous or next arrow to show other years, if needed.
3. Click the month and year.
4. Click OK.
Figure 64: Calendar – Select Month/Year
The user will then be prompted to select the date within that month/year on the calendar popup.
2. Use the
arrows to show
other years
3. Select the
appropriate year
and month
4. Click OK
ConnectingGTA User Guide September 2015 Page 49
Viewing Documents
The document viewer is a separate window that opens when you select a document for viewing from
any portlet. Because each portlet contains different types of data, the document viewer will be
slightly different for each component. The document viewer can be accessed three ways:
1. Click the attachment icon
2. Double-click the row
3. Select the row of interest and select View
Figure 65: Opening the Document Viewer
The document viewer window will open to display the attachments. If there are multiple
attachments, each will display on its own tab. The following information will be displayed:
Patient Name, Health Card Number (HCN), Date of Birth (DOB) and Gender
Summary information (varies based on which portlet the attachment is opened from)
Attachment content
Privacy Disclaimer
Footer information (User ID, Organization, Date/Time)
3. Select row
and click View
1. Click
attachment icon
2. Double-click the row.
ConnectingGTA User Guide September 2015 Page 50
Figure 66: Document Viewer Framework
Users can print attachments from the document viewer, one tab at a time. See Printing from
Document Viewer.
Users must close the document viewer to continue working in the solution.
Figure 67: Closing the Document Viewer
Option 1: Close
the solution
using the ‘x’
Option 2: Close the
solution using the
Close button
Patient Name,
DOB, Age, Gender
and HCN
Summary
Information
Attachment
content
Privacy
Disclaimer
ConnectingGTA User Guide September 2015 Page 51
The Visits and Encounters and Community portlets allow for multiple documents to be associated with
a single visit. If the number of documents associated to a single visit or referral exceeds the
maximum that can be displayed (20), a message will be displayed in each applicable portlet.
Documents displayed in the Visits and Encounters portlet are also displayed in the Documents and
Notes portlet. If the number of documents for a visit exceeds 20, the following message will be
displayed
Figure 68: Too many matching documents – Visits and Encounters
Documents in the Community portlet only appear in the community portlet. If the number of
documents for a community encounter exceeds 20, the following message will be displayed
Document Size
The largest file that can be sent to the solution is 7MB. Files larger than 7MB will be divided to
smaller files by sites before sending to ConnectingGTA. Sites are suggested to name the files part 1
and part 2 to indicate the relationship of the files; however this may not always be the case.
Document Types
The following report types can be sent to solution to display: DOC, GIF, HTML, JPG, PDF, RTF, TIFF,
XML.
DOC and RTF files have to be downloaded by local applications to be viewed. Depending on the
plugins available on the user’s workstation, TIFF and PDF document may also have to be downloaded
by local applications to be viewed. Users must ensure that if PHI or personal information is
ConnectingGTA User Guide September 2015 Page 52
downloaded onto a mobile device from the solution, the location where the data is stored is encrypted
or the device utilizes full disk encryption.
1. Users will be presented with two tabs – the first tab provides instructions for viewing the
document:
Figure 69: Document View with Multiple Tabs
2. Follow the instructions displayed within the Document Viewer to trigger the download of the
document. In the example below, click on the second tab to trigger the File Download dialog.
3. Select Open.
4. Download will download using standard browser functionality.
Figure 70: File Download Dialog
1. Click Open to download
the document
ConnectingGTA User Guide September 2015 Page 53
Other files types can be viewed directly in the Document Viewer, as long as the add-ons are
configured.
Note: When using chrome, these documents will automatically download locally (and appear in the
downloads bar at the bottom of the browser). The first tab in document viewer will indicate that
clicking on the second tab will download the file locally. Users must ensure that if PHI or personal
information is downloaded onto a mobile device from the solution, the location where the data is
stored is encrypted or the device utilizes full disk encryption. Delete the file when you log out of the
solution.
ConnectingGTA User Guide September 2015 Page 54
Printing
Note that the user may only print personal health information from the solution if it is allowed by the
user’s organizational policies. Additionally, the user must handle any print-outs according to their
organizational procedures.
The following table provides a summary of what can be printed in the solution from My Workspace
tab.
List
My Patients List
My Recent Patients List
Table 3: Printing from My Workspace Tab
The following table provides a summary of what can be printed in the solution from Patient Care tab.
Available Views
Portlet Summary (3 Col)
Summary (1 Col)
Individual Portlet
Document
Viewer
Visits/Encounters and Summary Reports
Documents/Notes
DI Reports
Other Results
Lab and Pathology Results
Community
Table 4: Printing from Patient Care Tab
Printing functionality is disabled in the summary views (1 or 3 column views) of the Lab and
Pathology Results solution. The summary views do not include adequate detail and may impact a
clinical decision. Therefore, printing has been disabled to prevent an end-user from printing and
saving incomplete information. End-users should not use their keyboards’ “Print Scrn” function to
take a snapshot of any view because it may include incomplete information.
ConnectingGTA User Guide September 2015 Page 55
Printing from List Views
Printing from a list view includes the following:
Printing My Patients List and My Recent Patients List
Printing any portlet from Summary View
Printing any portlet from Summary List View
Printing any portlet from the individual portlet view
For Internet Explorer 8 users: To ensure that your printed copy includes attachment icons, ensure
that the print option Print Background Colors and Images is selected. To select or review this
option, from the File menu, click Page Setup….
Figure 71: Page Setup Dialog
To print a list:
1. Click the Print icon in the upper right corner of the list/portlet. Note that this printing
functionality will not be available from the Lab and Pathology Results portlet.
Figure 72: Print Icon
2. When the print icon is clicked, the standard print dialog for the internet browser will open.
This dialog will vary depending on which internet browser is in use.
The ConnectingGTA Header and Footer will be applied to all list views when printed. Note that
Patient’s Name, HCN, DOB, and Gender will not be printed if the printing is originating from
My Workspace (e.g., My Patients list or My Recent Patients list).
Click Print
ConnectingGTA User Guide September 2015 Page 56
Figure 73: Print Preview and Print Dialog (Internet Explorer)
Once the print icon is selected, all data in the view prints:
a. Any filters, sorting or other data limiting component features apply to the print function and
only those selected data/columns/sort options in the view (to include multiple pages if
warranted) will print in a formatted document.
b. If printing from the Summary View, only the columns displayed in this view will print (not all
the columns in the full portlet).
Print header includes:
- Portlet name
- Patient name
- Patient DOB
- Patient age
- Patient HCN
Print footer includes:
- Privacy disclaimer
- Print source
(ConnectingGTA)
- User’s ID name
- User’s organization
- Date printed
Select desired print
options and click Print.
ConnectingGTA User Guide September 2015 Page 57
c. If no filters or sort options are selected, all associated data for the view will print.
d. When paging is in effect, a user will be able to print all pages for the list (they are not limited
to the current page being viewed).
Printing from Document Viewer
Any attachment can be printed directly from the Document Viewer.
1. Click the Print Current Tab button to print the attachment found in the current tab.
The ConnectingGTA Header and Footer will be applied when possible, given the originating
format of the document being printed.
Note: To have the header appear at the top of every printed page, users of the Chrome web
browser must select the Headers and Footers check box.
Figure 74: Document Viewer Print Button
Click Print Current Tab to
print the attachment
Print header
includes:
- Patient name
- Patient DOB
- Patient age
- Patient HCN
Print footer includes:
- Privacy disclaimer
- Print source
(ConnectingGTA)
- User’s ID name
- User’s
organization
- Date printed
ConnectingGTA User Guide September 2015 Page 58
2. When the print button is clicked, the standard print dialog for the internet browser will also
open. This dialog will vary depending on which internet browser is in use.
Figure 75: Print Dialog (Internet Explorer)
Print Format
Images will be resized to fit within the width of the page when printing
Standard format is 8 ½ by 11
Print can be landscape or portrait to fit the document contents the best way
Select desired print
options and click Print.
ConnectingGTA User Guide September 2015 Page 59
Find and Select Patients
My Workspace Tab
The My Workspace tab contains patient lists that enable quick and easy selection of a patient. When
logging into the solution without a patient in context, this is the default page that will open.
The My Workspace page contains two components:
My Patients list
My Recent Patients list
Figure 76: My Workspace Overview
My Patients List
The user can add patients to My Patients list, which appears on the My Workspace tab. The My
Patients list is a convenient way to find a patient record quickly and easily.
The list contains the following patient information: name, gender, date of birth, age, ID (all IDs
available in hover over), organization and date added. By default, the list is sorted in ascending
order by Name.
Figure 77: My Patients List
My Patients List
My Recent
Patients List
ConnectingGTA User Guide September 2015 Page 60
Putting a Patient into Context
There are two ways to put a patient into context and view that patient’s data:
A. Double-click the patient row.
B. Click on the patient row to select it, then click View button.
Note: The ‘View’ button is not enabled until you click a row to select a patient.
Figure 78: View Button, My Patients List
After double-clicking the patient row or clicking View button, the solution does the following:
• Opens the Patient Summary page on the Patient Care tab
• Places the patient in context
• Displays the patient demographics in the patient banner
Add Patients
To add a patient to the list, use the Add/Remove Patient button on the patient banner (Add or
Remove Patient).
Remove Patients
Patients remain on the list until removed by the user.
1. With a patient row highlighted, click the Trash icon on the corresponding patient row to
delete the patient from the list.
Figure 79: Trash Button
Click the Trash icon to
delete ‘Smith, Carla’
from the list
ConnectingGTA User Guide September 2015 Page 61
2. Click Continue. Patient will be removed from list and confirmation message will display.
Figure 80: Remove Patient from List Confirmation
Patients can also be removed from a list using the Add/Remove Patient button on the patient banner
(Add or Remove Patient).
Reminder: Patients should be removed from My Patients list when no longer required.
Preferences
By default, the My Patients list shows all available columns. Users can set preferences for My Patients
list using two methods.
A. Adjust preferences directly on the list
Adjust the width of any column (Column Width).
Hide any of the following columns from the display: Name, Gender, DoB, Age, ID,
Organization and Date Added (Hide or Show Columns).
Sort the list by any column in ascending or descending order (Sorting)
Filter the list by any column (Filtering).
Note: Preferences configured directly on the list are not saved after navigating away from the My
Patients list.
B. Personalize the list by clicking on the User Preferences button .
Change which columns are displayed (Modify Columns – Hide/Display)
Change the order they are in (Modify Columns – Change Display Order)
Select which column should be used as the default sort (Change Default Sort)
Specify the number of data rows to display (Set Content Area Height)
Reset to system defaults (Reset to System Default)
My Recent Patients List
The My Recent Patients list is a convenient way to find patient records that have recently been
viewed by the user. The list is automatically created by the solution based on recently viewed
patients. Note that:
ConnectingGTA User Guide September 2015 Page 62
• A patient is added to the list as soon as the patient has been put into context within the
solution by the user (i.e., as soon as the user views on the patient’s data on Patient Care tab)
• Patients accessed within the last year are visible on this list
Figure 81: My Recent Patients List
Note:
Last Accessed is the date the logged-in user last accessed the patient’s record
Hover the pointer over the ID to see a list of other IDs for the patient
A patient can be added to My Patients list using the Add to… button (same
functionality as available on the patient banner).
By default, the list is sorted in descending order by Last Accessed.
Putting a Patient into Context
There are two ways to put a patient into context and view that patient’s data:
A. Double-click the patient row.
B. Click on the patient row to select it, then click View button.
Note: The View button is not enabled until you click a row to select a patient.
Figure 82: View Button, My Recent Patients List
ConnectingGTA User Guide September 2015 Page 63
After double-clicking the patient row or clicking ‘View’ button, the solution does the following:
• Opens the Patient Summary page on the Patient Care tab
• Places the patient in context
• Displays the patient demographics in the patient banner
Preferences
By default, the My Recent Patients list shows all available columns. Users can set preference for My
Recent Patients list using two methods.
A. Adjust preferences directly on the list
Adjust the width of any column (Column Width).
Hide any of the following columns from the display: Name, Gender, DoB, Age, ID,
Organization and Date Added (Hide or Show Columns).
Sort the list by any column in ascending or descending order (Sorting)
Filter the list by any column (Filtering).
Note: Preferences are not saved after navigating away from the My Recent Patients list.
B. Personalize the list by clicking on the User Preferences button
Change which columns are displayed (Modify Columns – Hide/Display)
Change the order they are in (Modify Columns – Change Display Order)
Select which column should be used as the default sort (Change Default Sort)
Specify the number of data rows to display (Set Content Area Height)
Reset to system defaults (Reset to System Default)
ConnectingGTA User Guide September 2015 Page 64
Time Span
By default, the list shows patients added in the last month (30 days). To view patients added during
a different time span:
1. Select the appropriate time span from the drop down list. Options are: 3 days, 5 days, 1
week (7 days), 1 month (30 days), 3 months (90 days) or 1 year (365 days).
Figure 83: My Recent Patients List Time Span Selection
Find a Patient
To find a patient in the solution:
1. Click the Search for a patient button at the top of the solution
window. This button is available on both the My Workspace and Patient Care tab.
Figure 84: Search for a Patient Button
The Patient Search and Selection window will open. There are three search options:
A. Search by HCN (default)
B. Search by MRN/CHRIS Client #
C. Advanced Search
Select time span
from drop down list
Search for a patient button
is always located near the
top of the solution
ConnectingGTA User Guide September 2015 Page 65
Figure 85: Patient Search and Selection Window
2. Within this window, enter the required search criteria using one of the three search options.
For required fields, a validation checkmark will display when the data is acceptable for a
search. An error message will display when further action is required.
Figure 86: Validation Messages
3. Click Search.
4. The solution will display the Patient Search Results table to display matched patients
(Select a Patient).
Search by HCN
Search for a patient using the patient’s Health Card Number by entering the following fields:
1. Health Card Number (Ontario Only)
E.g., “123456789”
2. Gender
Select gender from the drop-down list (male, female, unknown)
3. Last Name
If an exact match is not found, metaphone matching and fuzzy matching is used on
this field
E.g., “Smith”
4. Click Search
Note:
• This search can only be performed with Ontario Health Card Numbers. To search for a patient
without an Ontario Health Card Number use either the Search by MRN/CHRIS Client # or
Advanced Search options.
• Fields are not case sensitive
• All three fields are mandatory
ConnectingGTA User Guide September 2015 Page 66
Figure 87: Search by HCN
Search by MRN/CHRIS Client #
Search for a patient using the patient’s Medical Record Number or CHRIS Client Number by entering
the following fields:
1. Organization
o Select the organization that is associated with the ID number to be used in the search
from the drop-down list
o E.g., “University Health Network”
2. MRN/CHRIS Client #
o Enter the ID number
o E.g., “A1258647”
Note:
• Both fields are mandatory
• Alphabetic characters in any ID number are case sensitive (to align with the implementation
on the provincial Client Registry).
Figure 88: Search by MRN/CHRIS Client #
Advanced Search
Search for a patient using any combination of the fields listed below:
1. Enter HCN 2. Select
gender
3. Type last name
4. Click Search
1. Select organization 2. Type ID
number
3. Click Search
ConnectingGTA User Guide September 2015 Page 67
1. Enter any combination of the below fields into the search window:
o Last Name
If an exact match is not found, metaphone matching and fuzzy matching is used
on this field
E.g., “Smith”
o First Name
If an exact match is not found, metaphone matching and fuzzy matching is used
on this field
E.g., “Mary”
o Middle Name
If an exact match is not found, metaphone matching and fuzzy matching is used
on this field
E.g., “Louise”
o Gender
Select gender from the drop-down list (male, female, unknown)
o DOB (Date of Birth)
Enter the patient’s date of birth by typing the date directly into the field or using
the calendar widget (Calendar)
E.g., “01JAN1975”
o Street Address
Enter the patient’s street address
If an exact match is not found, sub-string matching is used on this field
E.g., “50 Maple Rd.”
o City
Enter the patient’s city of residence
If an exact match is not found, sub-string matching is used on this field
E.g., “Toronto”
o Postal Code
Enter the Canadian or International postal code for the patient, and exact match
is required
E.g., “X1X 6Y6”
o Phone Number
Enter the patient’s ten digit phone number (including the area code)
E.g., “416-555-1234”
o Organization
Select an Organization from the drop-down list
2. Click Search.
Note:
• A minimum of one field is required
• Fields are not case sensitive
ConnectingGTA User Guide September 2015 Page 68
Figure 89: Advanced Search
Select a Patient
After entering patient data into one of the available search options and clicking Search, the Patient
Search Results table will display at the bottom of the window.
Figure 90: Patient Search Results Table
Name, Gender, DOB, ID numbers and address information is always returned for all three search
options. The address and phone numbers are available to display on an expanded view.
1. Use any combination of
input fields
2. Click Search
Patient Search Results
ConnectingGTA User Guide September 2015 Page 69
Figure 91: Expanding the Search Results
If there are no patients that match the search criteria, the portlet will display ‘No patient for these
criteria’ in the Patient Search Results table.
Figure 92: No Patient Search Matches
Note: If more than 5 patients are matched to the entered search criteria, no results will be returned.
Users will be prompted with a message to further refine their search criteria and search again. To
clear the data populated in the search fields, users must select the Clear button.
Figure 93: Error Message - Too Many Results
Note: If there are multiple instances of a single patient, no results will be returned. Instead, users
will be shown an error message.
ConnectingGTA User Guide September 2015 Page 70
Figure 94: Error Message - Error with Patient's Record
Putting a Patient into Context
To view the patient’s data, the user must put the patient into context. This can be done two ways:
A. Click to select the row for the correct patient and then click View Selected Patient -OR-
B. Double-click on the row for the chosen patient.
Figure 95: View Selected Patient Button
With patient name
highlighted, click View
Selected Patient
ConnectingGTA User Guide September 2015 Page 71
Upon patient selection:
• The search window is closed
• The patient banner is updated to reflect the patient in context
• The user lands on the Summary View for that patient (or the user’s custom default view, if
applicable)
Linked Records
Search results may come from one or more sources, therefore a single patient may have multiple
MRNs and/or CHRIS Client #s in addition to a Health Card Number (HCN). In this case of linked
records (multiple IDs associated to the same patient), all of the patient’s IDs (and each associated
Organization) will display.
All IDs (HCN, MRNs, and CHRIS Client #s) for a patient will display alongside the master set of the
patient’s demographic information.
Patient Search Results Preferences
When the patient search results are displayed, the results are displayed using all available columns
and will be sorted in descending order by Name. The following display preferences are available:
• Sort the table by Name, Gender, or DoB, in ascending or descending order.
• Adjust the width of any column
Note: Preferences are not saved when the ‘Patient Search and Selection’ window closes.
Patient ‘Becks, Sam’
has 3 separate ID
numbers
ConnectingGTA User Guide September 2015 Page 72
Clinical Data Components
Timeline
The timeline controls the date range of data that displays in components on the Patient Care tab.
Data displayed within each portlet is within the selected time frame, unless otherwise specified.
The default time range is 30 days back from today, with the most recent date at the left end of the
Timeline. However, the user can choose to have the most recent date at either end of the Timeline
(Timeline Preferences).
Figure 96: Timeline (30 days)
When today’s date appears on the Timeline, an orange indicator is used to indicate the current
date/time position. Additionally, when the Timeline range is short enough, today’s date will be
represented for the full day indicating both the start and end of the day.
Figure 97: Today Date/Time Indicator
Today – current date/time
Today – End of Day Today – Start of Day
ConnectingGTA User Guide September 2015 Page 73
Timeline Preferences
The user can choose to have the most recent date at either end of the Timeline.
1. Click on the User Preferences icon on the right side of the Timeline.
Figure 98: User Preferences Icon
2. In the User Preferences dialog, select which results to display on the left side of the Timeline
as shown in the dialog below. To change today’s date to display on the right side of the
Timeline, select Oldest results and click Save. This change will persist until the user changes
it again.
Figure 99: User Preferences Selection
Timeline Control Mechanisms
When first displayed, the time range defaults to 30 days back from today. However, there are
multiple ways that a user can change the time range being displayed:
Figure 100: Timeline
Fixed time intervals Custom time interval
Time interval chevron Slider control
1. User
Preferences
icon
2. Make
selection and
click Save
ConnectingGTA User Guide September 2015 Page 74
Note: In order to populate the complete data set across all portlets, the Timeline will be greyed out
while data is loading. The user will not be able to interact with the Timeline until all portlets have
completed loading.
Fixed Time Intervals
1. Select a time interval button to set the time range (7 days, 30 days, 6 months, 1 year).
Figure 101: Fixed Time Intervals
Custom Time Interval
1. Click the Custom button to open the custom date range dialog.
2. Enter the From and To dates for the custom time range (Calendar).
Note: independent of which direction your timeline is displaying, the interval start date will
always be entered into the From field and the interval end date will always be entered into the
To field.
3. Click Go.
Figure 102: Custom Time Interval
1. Click Custom button
2. Specify dates 3. Go
ConnectingGTA User Guide September 2015 Page 75
Time Interval Chevrons
1. Click the arrow shaped chevron at either end of the Timeline to view the previous or
next time interval of the same duration as the currently selected time interval.
Figure 103: Arrow Shaped Chevron
Slider Controls
1. Drag the beginning and/or ending sliders to change the time range within what is currently
displayed.
In the example below, the user’s original time frame was 30 days. By using the slider controls on
either end of the Timeline, the user was able to further refine the time range and hence the data
displayed in all of the portlets.
Figure 104: Reducing the Selected Time Range
Encounter Selection
1. Click on an inpatient icon directly on the Timeline to display data ranging from two weeks
prior to and two weeks after the selected encounter.
Note: If the inpatient visit is ongoing (there is no discharge date), clicking on the icon will
display data ranging from two weeks prior to and two weeks after the start date of the
inpatient visit. In order to avoid missing any data that may fall outside of this range, use the
Custom Time Interval to select the appropriate range.
2. Click on an ambulatory icon directly on the Timeline to display data ranging from two weeks
prior to and two weeks after the start date of the encounter.
3. Click on an emergency icon directly on the Timeline to display data ranging from two weeks
prior to and two weeks after the start date of the encounter.
Note: This does not limit the information in the portlets to be specific to the chosen
encounter, only the approximate date range of the encounter data.
ConnectingGTA User Guide September 2015 Page 76
Figure 105: Encounter Selection
Display of Encounters
Three types of encounters display on the Timeline: inpatient, ambulatory and emergency.
The inpatient encounter bar, the blue bar displayed above the Timeline, shows the length of the
encounter. The ambulatory and emergency visits are each represented by an icon.
The user can choose to hide any of the visit types from the Timeline display by un-checking the
appropriate visit type in the Timeline legend. This WILL NOT change the data that displays in any of
the portlets, only the icons that appear on the Timeline.
Figure 106: Encounter Legend
Hovering over any encounter will display a tooltip with more information about the encounter, such
as:
• Visit Date
• Visit Type
• Reason for Visit
• Facility Visited
If multiple visits overlap a particular time frame, the hover over information will display the earliest
encounter
Figure 107: Encounter Tooltip
1. Click on any icon to re-align the Timeline
ConnectingGTA User Guide September 2015 Page 77
Timeline Relationship to Portlet Dates
* indicates the date field(s) that is used by the Timeline for the portlet
Portlet Name Tab Name
(if applicable)
Date(s)
Included
Date Description Relationship to Timeline
Visits/Encounters Date* Visit date or encounter start date; Display only date not time
Display any visit/encounter that has begun, ended or is ongoing within the selected time range
Discharge Date*
Date of discharge for the inpatient
encounter, not available for outpatient encounter types; Display only date not time
Documents/Notes Dictation Date/Time*
Date/time document was dictated
Display any document/note with a dictation date within the selected time range
Admit Date/Time
Admit date the document/note is
associated with
Discharge Date/Time
Discharge date the document/note is associated with
Lab Results All
Chemistry Hematology Blood Bank Pathology Microbiology Other
Collection
Date/Time*
Specimen collected
date/time
Display any lab result with a
collection date/time within the selected time range
Last Updated
Date/Time
Date/time lab result was last updated
DI Reports Procedure Date/Time*
Observation date/time Display any report with a procedure date within the selected time range
ConnectingGTA User Guide September 2015 Page 78
Portlet Name Tab Name
(if applicable)
Date(s)
Included
Date Description Relationship to Timeline
Other Results All Cardiology
Procedure Date/Time*
Observation date/time Display any result with a procedure date within the selected time range
Community Referral Start Date*
Equivalent to encounter admit date
Display any referral that has begun, ended or is ongoing within the selected time range (TBC)
Referral Close Date*
Equivalent to encounter discharge date
Table 5: Timeline Relationship to Portlet Dates
Overriding Consent
A patient can request to have all or some of their personal health information (PHI) blocked. This
block is referred to as a Consent Directive which can be requested by a patient or substitute decision
maker (SDM). This Consent Directive can be applied to PHI available in the Clinical Data Repository
(CDR), the Ontario Laboratories Information System (OLIS), or both.
Types of Consent Directives:
1. Global: Restricting access to all PHI in the Clinical Data Repository (CDR) for that patient
(except demographic data in the Client and Consent registries).
2. Domain: Restricting access to all PHI in an application or domain (according to the directives
registered in the application or domain), i.e. from OLIS in labs portlet.
3. Health Information Custodian (HIC) Record: Restricting or allowing access to all PHI
from a specific site/facility for a specific patient
4. Health Information Custodian (HIC) Agent:
a. All Agents - Restricting or allowing all users from a specific site/facility to access the
patient’s PHI in the CDR
b. (Single) Agent: Restricting or allowing a specific user (individual person) to access the
patient’s PHI in the CDR
ConnectingGTA User Guide September 2015 Page 79
When consent directives are applied for a patient and resultantly PHI is blocked, the following will
appear within the portlets:
1. A message will appear in every portlet with blocked PHI: “Warning: Some or all records are
blocked due to a patient consent directive.”
2. Yellow banner providing the option to override the consent directive
Figure 108: Display of Blocked PHI
Consent directives are only applied on the Patient Care tab, not before. Therefore they will never
prevent a patient from being found in a search or displaying in patient lists.
Viewing Unblocked Data Only
It is possible that only selective PHI for a patient is blocked. If a Consent Directive is applied to only
part of the PHI, the user will still be able to access the PHI that is not protected by a Consent
Directive. Messages will continue to display indicating that some or all results may be blocked as a
reminder.
Overriding Consent
Note: Overriding consent will override all active consent directives for the patient – it is not limited to
PHI in the current portlet.
If an override of consent is required:
1. Click the Override Consent button to display the dialog.
Figure 109: Override Consent Button
Click Override Consent button
ConnectingGTA User Guide September 2015 Page 80
2. Select one of the three available override reasons:
Option 1: Express consent obtained from patient (Option 1)
Option 2: Express consent obtained from a Substitute Decision Maker (SDM) (Option 2)
Option 3: Significant Risk of Serious Bodily Harm (Option 3)
Figure 110: Override Consent Dialog
Note: When you choose the reason, you will not be able to change it within the window for which the
override is valid (i.e., override is valid until 11:59pm on the day that the override is conducted in the
ConnectingGTA Solution). If you perform an override after the override period, you must choose the
reason again – the same or another.
Overriding Consent: Express Consent Obtained from Patient
1. Click Express consent obtained from patient option.
2. Click Override Consent and View Patient Record button to complete the override.
Figure 111: Consent Override, Option 1
1. Click Option 1
2. Click Override
Consent
ConnectingGTA User Guide September 2015 Page 81
Overriding Consent: Express consent obtained from a Substitute Decision Maker (SDM)
1. Click Express consent obtained from a Substitute Decision Maker (SDM) option.
2. Document SDM first name and last name.
Note: The first name has a maximum length of 20 characters. The last name has a maximum
length of 30 characters. Please ensure the text entered into these fields is within these limits.
3. Select the SDM’s relationship to the patient from the Relationship to Patient (SDM) drop down
menu
4. Click Override Consent and View Patient Record button to complete the override.
Figure 112: Consent Override, Option 2
Overriding Consent: Significant Risk of Serious Bodily Harm
1. Click Significant Risk of Serious Bodily Harm option.
2. Click Override Consent and View Patient Record button to complete the override.
Figure 113: Consent Override, Option 3
Notes:
This option will not override any blocked OLIS (Lab) PHI, only PHI from the CDR will be
unblocked
1. Click Option 2
2&3. Enter required
SDM information
1. Click Option 3 2. Click Override
Consent
ConnectingGTA User Guide September 2015 Page 82
To subsequently unblock OLIS PHI, the patient must be put into context again (return to My
Workspace and select patient again or search for the patient again) and consent override must
be provided using option 1 or 2
Once the override has been completed, all data in the portlets will be refreshed and blocked PHI will
display. The following message will display in any portlet, with the exception of the Lab and
Pathology Results portlet, where blocked PHI is being viewed:
“Warning: You are viewing PHI that was blocked & may only use or disclose it as
instructed by the patient/SDM.”
Figure 114: Viewing Blocked PHI
In the Lab and Pathology Results portlet, the following message will be displayed if blocked PHI is
being viewed:
“Warning: One or more of the tests in the view may have been blocked by the patient as
indicated within each OLIS report.”
Figure 115: Viewing Blocked PHI - Lab and Pathology Results Portlet
Note: When providing a consent override for OLIS PHI, consent will be overridden for any user within
your Organization for 4 hours. When providing a consent override for non-OLIS PHI, consent will be
overridden until 11:59pm on the day on which the override occurs.
Note: All consent directive overrides are reviewed by the CPO of the Organization.
ConnectingGTA User Guide September 2015 Page 83
Patient Summary Views and Custom Views
Summary views are used to provide a quick overview of recent activity in a patient’s record. Every
portlet can be viewed on the Summary View page, Summary List View page or on the individual
portlet page for that portlet. See General Navigation.
Users can also create their own custom views with any combination of portlets displayed on the view.
Using the available data portlet components, the user can create up to twelve custom views. The
option to add a new custom view will be disabled once the user reaches the maximum number of
custom views. To enable “add custom view” once the user has reached the maximum number of
views, the user must delete views to a number less than the maximum.
Working with Custom Views
To create a custom view
1. Expand the navigation bar, if necessary.
2. Select the edit icon at the top of the navigation bar.
Figure 116: Edit Icon on the Left Navigation Bar
Note: If the edit icon is not available, click My Views.
Figure 117: My Views
ConnectingGTA User Guide September 2015 Page 84
3. Click the More button, and then click Add New Page/View…
Figure 118: More Button
4. From the Create Page dialog box, in the Page Name box, type a name.
Note: No action is required on the ‘Friendly URL Name’ field, this will populate automatically.
Figure 119: Create Page Dialog
5. Click the Change link.
ConnectingGTA User Guide September 2015 Page 85
6. From the Select a template dialog box, select either “Single column” or “Top column, three
vertical columns”, then click the Select button.
Figure 120: Select a Template Dialog
7. From the Create Page dialog box, click the Create button.
Figure 121: Create Page Dialog
ConnectingGTA User Guide September 2015 Page 86
8. Do one of the following to select the portlets to include in the custom view:
Click the + icon for the portlet you wish to add.
Figure 122: Add Portlet using the + Button
Click the name of the portlet you wish to add. Then from the Details dialog box that
appears, click the Add to page button.
Figure 123: Add Portlet by Clicking on the Portlet Name
ConnectingGTA User Guide September 2015 Page 87
Drag and drop the portlet you wish to add.
Figure 124: Add Portlet by Drag & Drop
In the three column layout, the portlets are added to the middle column directly below the Timeline.
The user can then ‘drag and drop’ each portlet into the appropriate position.
In the one column layout, the portlets are added directly below the Timeline. The user can then ‘drag
and drop’ each portlet into the appropriate position
Reminder: By default the Timeline and Patient Banner components are displayed as the first two
components at the top of any view. These components cannot be removed and their position should
not be modified.
ConnectingGTA User Guide September 2015 Page 88
9. To save the view, do one of the following:
o Click the Save button.
Figure 125: Save Button
o Click the save link within the view.
Figure 126: Save Hyperlink within the Portlet
10. To revert to the last saved version of the page, click the revert button.
Figure 127: Revert Button
ConnectingGTA User Guide September 2015 Page 89
11. Once completed with the page, click the view icon.
Figure 128: View Icon
Notice that the custom view that you have just created now appears in the navigation bar, whether it
is expanded or collapsed.
Figure 129: Left Navigation Bar with New View
ConnectingGTA User Guide September 2015 Page 90
To edit a custom view
1. Expand the navigation bar, if necessary.
2. Select the custom view you intend to edit.
3. Select the edit icon at the top of the navigation bar.
Figure 130: Left Navigation Bar with Custom View
4. Edit the custom view by adding, moving, or deleting portlets.
To move portlets around within the custom view, users can ‘drag and drop’ the portlet or use the
right click menu. To access this menu, right click at the extreme right side of the portlet header. The
menu will display with available options for moving the portlet.
Figure 131: Right Click Menu
5. Click the Save button.
6. Click the view icon.
Note: To change the name or layout of the page, the users will need to create a new page/view and
delete the one they no longer want.
3. Select the custom view
1. Ensure Navigation Bar is
expanded
2. Select the edit
icon
ConnectingGTA User Guide September 2015 Page 91
To delete a custom view
1. Expand the navigation bar, if necessary.
2. Select the custom view you intend to delete.
3. Select the edit icon at the top of the navigation bar.
Figure 132: Left Navigation Bar with Custom View
4. Click the More button, and then click Delete Page…
5. Click OK to confirm that you want to delete the page.
6. Click the view icon.
2. Select the
custom view
1. Ensure Navigation Bar is
expanded
3. Select the edit
icon
ConnectingGTA User Guide September 2015 Page 92
Summary View
When first accessing the Patient Care tab, the default view is the Summary View. This is a
consolidated view of all six portlets showing data 30 days back from today. Each portlet is in its
condensed format, not showing all data columns.
Note: The view that appears at the top of the Left Navigation Bar (first view in the list) is the default
view for the user. If the user does not have any My Views configured, the default view will always be
the Summary View (defined below).
Figure 133: Summary View
To see the full portlet, use the Navigation Bar to select the portlet of interest (Navigation Bar)
Navigation Bar
Patient Banner
Timeline
Condensed
data portlets
ConnectingGTA User Guide September 2015 Page 93
Summary List View
This view presents all six full-sized portlets in a single vertical view. All default columns will be
displayed in this view since it is in full-sized portlet view.
Figure 134: Summary List View
Visits/Encounters and Summary Reports
The Visits/Encounters and Summary Reports portlet displays a list of all encounters (visits/episodes)
for the selected patient from all data sources (locations) within the time period selected on the
timeline. Any visit/encounter that started, finished, or is ongoing during the selected timeline
range will display.
ConnectingGTA User Guide September 2015 Page 94
Figure 135: Visits/Encounters and Summary Reports Portlet
The standard (default) columns as displayed above are:
Column Description
Date
Visit date if an ambulatory visit.
Encounter start date if inpatient, emergency department (ED) or
recurring visits.
*Default sort using this column
Type
- Inpatient*
- Ambulatory*
- ED (Emergency Department)*
- Pre-admit
- Recurring Outpatient
- Unknown / Other
* An icon will display on the timeline for these visit types
Summary
Reports
Attachment icon will display when documents are available for viewing.
Click on the “View” icon with the row selected, double click on the row,
or click directly on the attachment icon to open the Document Viewer
with the document of interest displayed (Viewing Documents).
Organization The facility or organization where the patient was actually seen. Click
the link to see additional information.
Service The service department or clinic where the visit/encounter took place
(e.g., Cardiology, Fracture Clinic).
ConnectingGTA User Guide September 2015 Page 95
Column Description
Discharge Date
Date of discharge for the visit/encounter. If an Inpatient or ED visit
does not have a discharge date, it is considered to be ongoing.
Note: Ambulatory visits will never have a discharge date.
Attending
Provider Attending Provider for the visit/encounter.
Reason for Visit Reason for visit or the diagnosis for the visit.
Visit /Encounter
ID
Visit or encounter number.
Note: This is a system number that can be used for cross-referencing
with the Documents/Notes portlet.
Table 6: Visits/Encounters and Summary Reports Data Elements
Summary Reports
Depending on the type of visit, certain documents associated to each visit can be viewed from this
portlet using the Document Viewer (as listed in the table below). Any documents not available
directly from the Visits/Encounters portlet will be available in the Documents/Notes portlet.
Visit Type Document Type to Display
ED Triage Note, ED Visit Report
Inpatient Admission Assessment, Discharge Summary, Medication
Reconciliation Report
Ambulatory Display all report types associated to the visit (no filtering).
Pre-Admit Display all report types associated to the visit (no filtering).
Recurring Outpatient Display all report types associated to the visit (no filtering).
Unknown /Other No reports are being pulled back. Solution will not display any
reports for this visit type
Table 7: Types of Reports Displayed per Visit Type
ConnectingGTA User Guide September 2015 Page 96
If there are more than 20 documents, a message will be displayed.
Figure 136: Too many matching documents
Preferences
By default, the Visits/Encounters and Summary Reports portlet shows all available columns. Users
can set preference for the portlet list using two methods.
A. Adjust preferences directly on the list
Adjust the width of any column (Column Width).
Hide any of the columns from the display (Hide or Show Columns).
Sort the list by any column in ascending or descending order (Sorting)
Filter the list by the date column (Filtering).
Note: Above preferences are not saved after navigating away from the portlet.
B. Personalize the list by clicking on the ‘User Preferences’ button .
Change which columns are displayed (Modify Columns – Hide/Display)
Change the order they are in (Modify Columns – Change Display Order)
Select which column should be used as the default sort (Change Default Sort)
Specify the number of data rows to display (Set Content Area Height)
Reset to system defaults (Reset to System Default)
Note:
If there are more rows than space available, use paging controls to see more rows or change
the default number of rows per page (Paging).
To print the list of encounters, click the print icon (Printing from List Views).
ConnectingGTA User Guide September 2015 Page 97
Documents/Notes
The Documents/Notes portlet includes all non-diagnostic notes and reports such as Consult Notes,
Discharge Summaries, History and Physicals, etc.
Note: The largest file that can be sent to the solution is 7MB. Files larger than 7MB will be divided to
smaller files by sites before sending to ConnectingGTA. Sites are suggested to name the files part 1
and part 2 to indicate the relationship of the files; however this may not always be the case.
Figure 137: Documents/Notes Portlet
The standard (default) columns as displayed above are:
Column Description
Document Date /
Time
The date and time of the document or note.
*Default sort using this column
Attachments (no
label)
Attachment icon will display when documents are available for viewing.
Click on the “View” icon with the row selected, double click on the row,
or click directly on the attachment icon to open the Document Viewer
with the document of interest displayed (Viewing Documents).
Description Description (title) of the document/note.
Status
Indicates the status of the document or note (e.g., preliminary, final,
etc.).
Only the most recent status of a document will be displayed in the
ConnectingGTA User Guide September 2015 Page 98
Column Description
portlet.
For a document/note with a status of ‘Withdrawn’, row detail will display
but no attachment will be available. If attachment is required, contact
the originating Organization.
Authored By The provider who dictated or documented the note or report.
Organization The facility or organization where the document or note was created.
Click the link to see additional information.
Admit Date / Time The admission date for the encounter associated with the note or report.
Discharge Date /
Time The discharge date for the encounter associated with the note or report.
Encounter / Visit ID
The visit or encounter number that the note or report is associated with.
Note: This is a system number that can be used for cross-referencing
with the Visits/Encounters portlet.
Table 8: Documents/Notes Data Elements
Preferences
By default, the Documents/Notes portlet shows all available columns. Users can set preference for
the portlet list using two methods.
A. Adjust preferences directly on the list
Adjust the width of any column (Column Width).
Hide any of the columns from the display (Hide or Show Columns).
Sort the list by any column in ascending or descending order (Sorting)
Filter the list by any column, with the exception of Attachments (Filtering).
Note: Above preferences are not saved after navigating away from the portlet.
ConnectingGTA User Guide September 2015 Page 99
B. Personalize the list by clicking on the ‘User Preferences’ button .
Change which columns are displayed (Modify Columns – Hide/Display)
Change the order they are in (Modify Columns – Change Display Order)
Select which column should be used as the default sort (Change Default Sort)
Specify the number of data rows to display (Set Content Area Height)
Reset to system defaults (Reset to System Default)
Note:
If there are more rows than space available, use paging controls to see more rows or change
the default number of rows per page (Paging).
To print the list of Documents/Notes, click the print icon (Printing from List Views).
Diagnostic Imaging Reports
The Diagnostic Imaging (DI) Reports portlet includes reports for all modalities found in the Diagnostic
Imaging department. The categories are based on the regional Diagnostic Imaging categorization of
procedures.
Figure 138: Diagnostic Imaging Reports Portlet
The standard (default) list of columns as displayed above:
Column Description
Procedure Date /
Time
The date and time the procedure took place (e.g. the time the patient
had their x-ray).
*Default sort using this column
ConnectingGTA User Guide September 2015 Page 100
Column Description
Attachments (no
label)
Attachment icon will display when documents are available for
viewing.
Click on the “View” icon with the row selected, double click on the
row, or click directly on the attachment icon to open the Document
Viewer with the document of interest displayed (Viewing Documents).
Procedure Name Name of the procedure that was performed.
Modality
- General Radiology
- CT Scan
- MRI
- Nuclear Medicine
- Ultrasound
- Mammography
- Special Procedures Report
- Other
Status
Indicates the status of the document or note (e.g., preliminary, final,
etc.).
Only the most recent status of a document will be displayed in the
portlet.
For a report with a status of ‘Withdrawn’, row detail will display but no
attachment will be available. If attachment is required, contact the
originating Organization.
Ordering Provider Provider who ordered the test, not the person who dictated the report.
Organization The facility or organization where the document or note was created.
Click the link to see additional information.
Table 9: DI Reports Data Elements
Preferences
By default, the DI Reports portlet shows all available columns. Users can set preference for the
portlet list using two methods.
ConnectingGTA User Guide September 2015 Page 101
A. Adjust preferences directly on the list
Adjust the width of any column (Column Width).
Hide any of the columns from the display (Hide or Show Columns).
Sort the list by any column in ascending or descending order (Sorting)
Filter the list by any column, with the exception of the Attachments column (Filtering).
Note: Above preferences are not saved after navigating away from the portlet.
B. Personalize the list by clicking on the ‘User Preferences’ button .
Change which columns are displayed (Modify Columns – Hide/Display)
Change the order they are in (Modify Columns – Change Display Order)
Select which column should be used as the default sort (Change Default Sort)
Specify the number of data rows to display (Set Content Area Height)
Reset to system defaults (Reset to System Default)
Note:
If there are more rows than space available, use paging controls to see more rows or change
the default number of rows per page (Paging).
To print the list of DI Reports, click the print icon (Printing from List Views).
Other Results
The Other Results portlet includes all results that are not in the Lab Results, Diagnostic Imaging
Reports, or Documents/ Notes portlets. The Other Results portlet will hold any procedure categorized
by Program and in some instances discipline, depending on how the site has mapped the document.
This portlet has 2 tabs:
‘All’ tab - displays all reports/results
‘Cardiology’ tab – will display any results categorized as ‘Cardiology’
ConnectingGTA User Guide September 2015 Page 102
Figure 139: Other Results Portlet
The standard (default) columns as displayed above are:
Column Description
Procedure Date /
Time
The date and time the procedure took place (e.g. the time the patient
had their EKG).
*Default sort using this column
Attachments (no
label)
Attachment icon will display when documents are available for viewing.
Click on the “View” icon with the row selected, double click on the row,
or click directly on the attachment icon to open the Document Viewer
with the document of interest displayed (Viewing Documents).
Procedure Name Name of the procedure that was performed.
Category Procedure category (e.g. "Cardiology", "Neurophysiology", etc.)
Status
Indicates the status of the document or note (e.g., preliminary, final,
etc.).
Only the most recent status of a document will be displayed in the
portlet.
For a report with a status of ‘Withdrawn’, row detail will display but no
attachment will be available. If attachment is required, contact the
originating Organization.
ConnectingGTA User Guide September 2015 Page 103
Column Description
Ordering Provider Provider who ordered the test, not the person who dictated the report.
Organization The facility or organization where the document or note was created.
Click the link to see additional information.
Table 10: Other Results Data Elements
Preferences
By default, the Other Results portlet shows all available columns. Users can set preference for the
portlet list using two methods.
C. Adjust preferences directly on the list
Adjust the width of any column (Column Width).
Hide any of the columns from the display (Hide or Show Columns).
Sort the list by any column in ascending or descending order (Sorting)
Filter the list by any column, with the exception of the Attachments column (Filtering).
Note: Above preferences are not saved after navigating away from the portlet.
D. Personalize the list by clicking on the ‘User Preferences’ button .
Change which columns are displayed (Modify Columns – Hide/Display)
Change the order they are in (Modify Columns – Change Display Order)
Select which column should be used as the default sort (Change Default Sort)
Specify the number of data rows to display (Set Content Area Height)
Reset to system defaults (Reset to System Default)
Note:
If there are more rows than space available, use paging controls to see more rows or change
the default number of rows per page (Paging).
To print the list of Other Results, click the print icon (Printing from List Views).
ConnectingGTA User Guide September 2015 Page 104
Lab and Pathology Results Portlet
Introduction to OLIS
Ontario Laboratories Information Systems (OLIS) is a provincial system that allows laboratory
information on patients from Ontario to be stored and retrieved electronically between practitioners
and laboratory service providers. Both private and acute institutions have been submitting data to
OLIS since January 2006 and this data continues to grow as new laboratories come on board. The
solution’s Lab and Pathology Reports portlet provides a view-only access to data currently available in
OLIS. This portlet is geared towards aiding clinical decision making and is meant to be used in
combination with the clinician’s existing access to their organization’s Health Information Systems.
The portlet is designed to present data as it is submitted to OLIS by the reporting laboratories
without alteration.
Important keywords:
Order and Report: In OLIS, a laboratory order and laboratory report differ only in whether
the results have been reported for the ordered tests, so the terms order and report are often
used interchangeably.
Order: An order identifies a patient, an ordering practitioner, and a list of CC’d practitioners.
The order’s main purpose is to group one or more test requests ordered by the practitioner
together.
Report: A report is a structured view of the results for an order. The report has test request
reported by an authorized Healthcare Facility.
Test Request: In OLIS, the tests ordered by the practitioner are grouped into Test Requests
(e.g. a Sodium test is sometimes grouped as part of a test request called Electrolytes).
OLIS Matching Points: The Ontario Health Card Number (HCN) is the primary patient
identifier the ConnectingGTA solution is using to match patient results stored in OLIS. This
may occasionally result in missing data from the solution as smaller labs may report results
using their own local identifiers (instead of an HCN) or patient’s may only have federal health
identifications (e.g. military personnel).
The Lab and Pathology Results portlet displays lab results returned from the Ontario Laboratories
Information System (OLIS) in 5 views.
1. Condensed Portlet view - Summary View
a. Quick view of what results are available
2. Individual Portlet Page - List View and Detail View
a. A more detailed view of what results are available with additional details available upon
clicking each result. Not all details are displayed to enhance usability.
3. Full Report View
a. The entire order shown as the reporting lab intended the order to be viewed. All results
for the order are displayed with all the available details.
4. Attachment View
a. All the attachments for a particular order are displayed at a glance.
5. Flowsheet View
a. Displays lab results in a tabular display over time, for a pre-determined set of panels
and test results
Information from acute, community, private labs and public health are displayed in the solution.
ConnectingGTA User Guide September 2015 Page 105
Currently the portlet filters the returned OLIS lab results into 8 tabs based on laboratory modalities or
functionality:
All – consolidated list of all available results
Hematology
Chemistry
Blood Bank
Pathology
Microbiology
Other – includes Immunology, Serology, Allergen and Clinical results
Flowsheet – aggregates a pre-determined set of panels and test results into a list view
Figure 140: Lab and Pathology Results Portlet
The look and feel of the Lab and Pathology portlet is consistent with the other portlets in
ConnectingGTA. However, close attention is required when using the following functionalities:
Filtering
Sorting
Printing
Consent Override
Status
List View and Detail List View
Hovering over full text result and links
Timeline
Condensed Portlet View – Summary View Page
Relevant patient information can be viewed at a glance in the condensed portlet view of the Lab and
Pathology Results portlet. All Lab and Pathology results with a Specimen Collection Date/Time that
falls within the selected timeline interval will be available in the portlet. In order to support an ‘at a
glance’ view, only the following key fields are displayed in this view:
Collection date and time
Last updated time
Ordered As
Test (test result name)
Flag
ConnectingGTA User Guide September 2015 Page 106
Figure 141: Lab and Pathology Reports Portlet, Condensed Portlet View
Users can navigate from this page to any of the other pages using the Navigation Bar.
Individual Portlet Page - List View and Detail View
Similar to the Condensed Portlet view, this view shows the data based on the selected Timeline
interval. In this view, users can view data in both the List View and Details View.
While still providing an ‘at a glance’ view of the results, this view provides additional details
necessary to facilitate making clinical decisions. This includes information such as result value,
reference range, status, specimen, nature of abnormality, reporting organization, etc. Due to the
large amount of details available it is broken into 3 groups of data:
1. The result value and attributes important to interpreting the result
2. Additional attributes about the result (comments, nature of abnormality, etc.)
3. Order level attributes with relation to the result (reporting organization, test request status,
etc.)
The first group is displayed in the list view. The last two are displayed in the details view that is
displayed upon clicking on the result row.
List View
The list view shares the same first 5 columns of the Condensed Portlet view and provides additional
columns that are important for interpreting the results appropriately. When first accessing this view,
the list view occupies the entire portlet module and is defaulted to the “All” tab. All lab results with a
Collection Date/Time that falls within the selected Timeline interval will be displayed. Results are
sorted by Collection Date/Time and the OLIS sort keys.
Note: If the result has been updated, the most recent result will always be displayed.
ConnectingGTA User Guide September 2015 Page 107
Note: If any result within an order has a collection date/time within the selected time range, then all
results for the order will be displayed in the grid view.
To view the Details screen:
1. Click on the result of interest (any row in the list)
2. The Details screen appears below the list to provide additional information about the result
that was clicked.
Note: Once the details screen has been opened, click the ‘x’ in the upper right corner of the details
screen to close it.
Figure 142: Individual Portlet Page, All Tab
Note that each tab has a default configuration of visible columns that varies based the
appropriateness of displaying that field for that tab/modality. For example, the Pathology tab will not
display a reference range or units by default as pathology results are generally available as a report
and not a standard discrete or numerical result. Users can add additional columns to the view for
each modality but cannot remove default columns. The columns available for display in any of the
tabs are listed in the following table.
Click the row to display details
for the ‘Glucose’ result
Click the ’x’ to close the
details screen.
ConnectingGTA User Guide September 2015 Page 108
Column Description
Collection Date/Time
Date and time of collection. This column is mandatory for all
modalities.
*Default sort using this column
Last Updated Date and time the result was last updated. This column is
mandatory for all modalities.
Ordered As Test Request name or Panel name that is associated with the test
result. This column is mandatory for all modalities.
Test Test result name. This column is mandatory for all modalities.
Flag Flag provided with the result (Flags)
Result Test result detail – numerical value or text. This column is mandatory
for all modalities.
Attachments
An icon will display in this column if one or more attachments are
associated with the result.
Click on the “View” icon with the row selected or click directly on the
attachment icon to open the Document Viewer with the document of
interest displayed (Viewing Documents).
Reference Range Reference range (normal range) for the test
Units Unit of measure for the result value
Test Result Status
Status of the test result. This column is mandatory for all modalities.
Note: Test results with a status of ‘Invalid’ will have a strikethrough
on the result, reference range, and units values in the list.
Specimen The source of the specimen
ConnectingGTA User Guide September 2015 Page 109
Column Description
Source Procedure source.
OLIS Full Report
An OLIS Full Report will be available for every lab result. Users can
open the full OLIS report by clicking on the attachment icon in this
column. Note that the report includes results for all Test Requests
within the Order. This column is mandatory for all modalities.
Table 11: Lab and Pathology Results Data Elements, List View
Details View
The Details View is the box below the list view that displays additional detail about the patient lab
results. The data displayed in the details screen is split into two sections: result level and order level.
Figure 143: Lab Portlet, including Details View
Result level details Order level details
ConnectingGTA User Guide September 2015 Page 110
Result level details are as follows:
Data Field Description
Test Name The test result name, test request name and a warning indicator if
the result is abnormal.
Result Test result detail – numerical value or text.
Flag Flag provided with the result (Flags).
Reference Range Reference Range (normal range) for the test and the nature of the
abnormal result (if applicable).
Units Unit of measure for the result value
Specimen The source of the specimen.
Source Procedure source
Reports/Images
Attachment link will display when attachments are available for the
result (excluding the OLIS Full Report). Clicking on it opens the
Document Viewer.
Test Result
Comments
Comments associated with the test result, including ancillary
comments.
Test Request
Comments
Comments associated with the test request, including Collector’s
comments.
Order Comments Comments associated with the order.
Table 12: Lab and Pathology Results Data Elements, Result Detail View
ConnectingGTA User Guide September 2015 Page 111
Order level details are as follows:
Data Field Description
Test Result Status
Status of test result
Note: Test results with a status of ‘Invalid’ will have a strikethrough
on the result, reference range, and units values in the details view.
Test Request Status Status of test request
Collection Date/Time Date and time of collection
Last Updated Date and time the result was last updated
Ordering Physician Physician who placed the order
Reporting
Organization Organization where the order was initiated
Performing
Organization Organization where the test was performed
Table 13: Lab and Pathology Results Data Elements, Order Detail View
Flags
When a result is abnormal, both the result value and flag value display in red and bold on the list
view and detail view. The available OLIS flags are:
Flag Description
Indicates an abnormal result within a test request or grouping
L Below low normal
H Above high normal
ConnectingGTA User Guide September 2015 Page 112
Flag Description
LL Below lower panic limits
HH Above upper panic limits
A Abnormal (applies to non-numeric results)
AA Very abnormal (applies to non-numeric units, analogous to panic limits for
numeric units)
Table 14: Lab and Pathology Results Data Elements, Flags
Note: When the value is abnormal, the accompanying nature of abnormality information is displayed
beneath the reference range value in the Details view.
Figure 144: Nature of Abnormality
Text Truncation
Result values in this portlet are truncated after 16 characters and are followed by an ellipse symbol
(“…”). An example of truncation would appear as follows “positive but tre…”
Note: Hovering over the truncated text value in the Lab and Pathology Results portlet does not show
the full text of the result. To view the full text, click on the link in the Detail View.
1. Click on the result with the truncated value to show the appropriate Details View.
2. Click on the result value that is hyperlinked within the Details View.
ConnectingGTA User Guide September 2015 Page 113
Figure 145: Lab and Pathology Results Portlet with Truncated Result
3. Full text of the truncated result will display in a pop up box.
Figure 146: Full Truncated Result View
Microbiology
When possible, microbiology data available in discrete values will be displayed in the List
View. However, there are cases when this is not possible, including data related to sensitivities. In
such cases, the user should access the OLIS Full Report directly (OLIS Full Report) to see the
appropriate detail.
1. For the appropriate row, click the attachment icon within the OLIS Full Report column.
Figure 147: Microbiology Tab
1. Click on row with
the truncated value
2. Click on the hyperlink
within the Details View.
Click the attachment
icon
ConnectingGTA User Guide September 2015 Page 114
Pathology
Pathology data is received in a report format and is not easily separated into detailed data without
losing context. Due to this, the List View does not show the full set of data available. To facilitate the
user’s workflow, high level information such as site of origin (body part) and the type of test
performed (e.g., surgical pathology) is displayed in the List View. To view the pathology test results
in the proper format, users should open the OLIS Full Report.
1. For the appropriate row, click the attachment icon within the OLIS Full Report column.
Figure 148: Pathology Tab
Flowsheet View
The Flowsheet View displays lab results in a tabular display over time for a pre-determined set of lab
panels and test results.
To access the Flowsheet View, the user must select the ‘Flowsheet’ tab. This is available only from
the Lab and Pathology Results View or the Summary List View.
Figure 149: Flowsheet Tab
Note: The results displayed in the trend view may not include all data that is available. Tests with
multiple assay methods may have additional result values available for the same collection date/time;
only one result value will be displayed for these tests. To view all available results, please use the All
tab.
Click the attachment
icon
Click the Flowsheet tab
ConnectingGTA User Guide September 2015 Page 115
A sub-set of test results will be displayed for the following panels:
o Hematology
o General Chemistry
o Lipid Profile
o Liver Panel/Pancreas Panel
The result value and any associated flag will be displayed directly in the grid (Flags).
Figure 150: Flowsheet Grid View
The user can take the following actions to access additional information on any lab result in the grid:
1. Hover over the result value to see the Normal Range, Units, Specimen, Status and Last
Updated date for the result.
Figure 151: Flowsheet Result Hover Over
ConnectingGTA User Guide September 2015 Page 116
2. Hover over the icon to see any Test Result comments associated with the result, if
available. Note that only Test Result Comments will be available in the hover (not Order or
Test Request comments)
Figure 152: Flowsheet Test Result Comment
3. Click on the result value to display the Details View for the result (Details View)
Figure 153: Flowsheet Details Screen
ConnectingGTA User Guide September 2015 Page 117
Note: If encapsulated data is associated with a result, the attachment will be available from the
details screen view only. (i.e., attachment icons will not display in the Flowsheet View).
Flowsheet Preferences
The Collection Date/Time will be displayed in the Flowsheet.
By default, the dates will display in reverse chronological order from left to right. The user can
choose to display the dates in chronological order.
1. Click on the User Preferences icon on the right side of the Flowsheet tab.
Figure 154: User Preferences Icon
2. In the User Preferences dialog, select ‘Oldest Results’ to display data is chronological order
and ‘Most recent results’ to display data in reverse chronological order.
Figure 155: Flowsheet User Preferences
User can filter and sort on the Test column in the Flowsheet tab:
To apply a filter, refer to Filtering (Apply a Filter).
To remove a filter, refer to Filtering (Remove a Filter).
User
Preferences
icon
Make selection and click Save
ConnectingGTA User Guide September 2015 Page 118
Flowsheet Navigation
The user will be able to scroll both vertically and horizontally to see all presented data in the
Flowsheet tab. The user will also be able to navigate rows using the keyboard arrow keys or the
scroll wheel on the mouse.
OLIS Full Report View
To view the complete detail of any lab order:
1. Click the attachment icon in the OLIS Full Report column within the appropriate result row of
the List View.
Figure 156: List View, OLIS Full Report Column
2. The Document Viewer will open and display the report for the full order.
Figure 157: Document Viewer, OLIS Full Report
Click the attachment
icon in the OLIS Full
Report column
ConnectingGTA User Guide September 2015 Page 119
The report can also be printed from the Document Viewer (Printing from Document Viewer)
To view any attachments that are associated with the OLIS Full Report:
1. Click on the attachment hyperlink found in the body of the report.
Figure 158: Document Viewer, OLIS Full Report with Attachment
2. Another tab will open in the Document Viewer, where the attachment will display.
Note: clicking on the same link more than once will result in multiple tabs with the same attachment
displayed. The only way to remove these duplicate attachments is to close and re-open the Document
Viewer.
Click hyperlink to
view attachment
ConnectingGTA User Guide September 2015 Page 120
Figure 159: Document Viewer, Viewing Attachment
Attachments
To view all the attachments associated with an order:
1. Click on the attachment icon visible in the attachment column of the List View.
Figure 160: List View, Attachments Column
Alternatively, click on the appropriate links in the OLIS Full Report (as described above in OLIS Full
Report View). Attachments are not common for most modalities with the exception of pathology. As
noted above, attachments are associated with a particular result (generally in place of a discrete
result value).
Click the attachment
icon in the
Attachments column
ConnectingGTA User Guide September 2015 Page 121
Personalization of the Lab and Pathology Results Portlet
General Preferences
Standard personalization and user preference features are available within the Lab and Pathology
Results portlet for each modality (tab).
Note: Due to the complex interaction between variables (e.g., source, units, results, etc.) of the Lab
and Pathology data in the portlet, OLIS does not recommend applying personalization to this portlet
that might misrepresent the data (e.g., removing columns).
Users can set preference for the portlet list using two methods.
A. Adjust preferences directly on the list (Temporary settings)
Adjust the width of any column (Column Width).
Hide any non-locked columns from display; this varies based on modality (Hide or Show
Columns).
Sort the list by any column in ascending or descending order (Sorting)
Filter the list by any column, with the exception of the Attachments and OLIS Full Report
columns (Filtering).
Note: Above preferences are not saved after navigating away from the portlet.
B. Personalize the list by clicking on the ‘User Preferences’ button . (Permanent setting)
Change which columns are displayed (non-locked columns only, this varies by modality) and
the order they are in (Modify Columns)
Select which column should be used as the default sort (Change Default Sort)
Reset to system defaults (Reset to System Default)
Sorting
There are 2 types of sorting on this portlet. The first is the OLIS defined sort and the second is the
user defined sort.
1. Default Sort (OLIS Defined Sort)
Default Sort is also referred to as the OLIS Defined Sort and is important to keep in mind as you
view the data. In order to maintain the sequence in which labs have intended to display their
result, the test result data is sorted by default in the following sort order:
Order Sort Key (Default Mode
for OLIS)
Notes
1 Collection date and time, in
descending order
Ensures that all tests are sorted by the latest
specimen collection date first.
ConnectingGTA User Guide September 2015 Page 122
Order Sort Key (Default Mode
for OLIS)
Notes
2 OLIS test request sort key
Defined by the laboratory who reported the
result. Ensures that the test is sorted in the
manner the laboratory believes is clinically
important.
3 OLIS test result sort key
Defined by the laboratory who reported the
result. Ensures that the test is sorted in the
manner the laboratory believes is clinically
important.
Table 15: Lab and Pathology Results, Default Sort
2. User Defined Sort
Applying the User Defined Sort, the user can choose to sort by any column. Users can sort on any
visible column in the Condensed Portlet View or Individual Portlet List View. However, the user can
only sort one column at a time.
To apply sorting, refer to Sorting.
Note: Sorting any column in ascending or descending order will re-order the results according the
fields’ data type (either alphabetical, numerical or date) in an increasing/decreasing direction. Some
columns allow sorting based on a limited set of values.
Within the Lab and Pathology Results portlet, data can be sorted by a unique feature called ‘Group
By’ option. Refer to Grouping for details.
Note: Use caution when applying a User Defined Sort. The column header will have an up or down
triangle indicating that the column has a sort applied. When an ascending/descending sort is applied,
the only way to “unsort” is to refresh the solution or change to a different view.
Grouping
Users can choose to group the display of lab results using a drop down menu in the portlet. The
following options are available:
1. None (default display) – lab results are not grouped by any attribute
2. Ordered As (Test Request name) – lab results are grouped together in the order sets,
panels or batteries they were ordered
3. Test Name – lab results are grouped together based on test result name.
4. Flag – lab results are grouped together based on flag.
ConnectingGTA User Guide September 2015 Page 123
Figure 161: Grouping Options
If there are abnormal/critical results within the group, a yellow triangle alert appears beside
the group header with a tool tip to indicating: “Abnormal/critical results present”.
All groups should be expanded by default. Use the expand/collapse all control to expand and
collapse all groups simultaneously.
When grouping has been enabled, column-level sorting applies to lab results within each group.
In other words, results will be re-ordered within each group.
When grouping has been enabled, you can filter for any column that has filter enabled.
Grouping does not persist between sessions.
Group by Ordered As
Grouping by Ordered As will display the test results by the test request name that they were ordered
as at a high level. This option is useful to identify what was ordered. For example, group order as
Complete Blood Count (CBC).
Each group header will display the Test Request name, a warning indicator if any results are
abnormal, Test Request status, specimen and collection date/time. Note that only tests from the
same order are grouped together using this option. As a result, you may see multiple CBC groups as
they were ordered separately.
Figure 162: Group by Ordered As
ConnectingGTA User Guide September 2015 Page 124
Group by Test Name
Grouping by Test Name will display the test results by name, in alphabetical order.
The group header will display the Test Result name which is an alternative to trending since it shows
similar tests grouped together and sorted by date.
Figure 163: Group by Test Name
Group by Flag
Grouping by Flag will bring all groups of tests with the same flag name together. The results with no
flags are grouped together in a group of “Non Flagged Results”. Groups will be displayed
alphabetically by flag name. This is helpful for reviewing all critical high (HH) tests at a glance.
The group header will display the Flag Name.
Figure 164: Group by Flag
Note: To return to the default view, users must select the ‘None’ Group By option.
Filtering
The portlet allows filtering in all the columns visible in the Condensed Portlet View and Individual
Portlet Views.
Filters can be applied to one or multiple columns at the same time (e.g., test and Specimen
columns). For most columns, applying a filter requires the user to type in free text keywords. The
portlet list will apply the filter immediately as the text is entered.
To apply a filter, refer to Filtering (Apply a Filter).
ConnectingGTA User Guide September 2015 Page 125
To remove a filter, refer to Filtering (Remove a Filter).
Note: filtering by the “Test” and “Ordered As” columns can result in a dramatic change in the list
view displayed. Users must pay close attention when filtering is applied to ensure correct
interpretation of the information. Filtering based on these fields can remove important contextual
information such as other tests that were ordered together, etc.
Paging
Paging is not employed for this portlet. All data is presented in a single list, use the vertical scroll
back to see more data.
Data Availability Indicators
A status indicator is displayed to indicate if all of the results have been returned from a query to the
database, if the query is still in progress or if there were errors in retrieving the data. This is at the
bottom of the List section.
Note: Depending on the patient and time interval selected, a large volume of lab data may be
returned to the Solution. The solution will display the results as they are received and will
continuously sort the data. This process may result in noticeable jumps in the position in the list of a
few results until the data collection process is complete.
Figure 165: Data Availability Indicator
The Lab and Pathology portlet has several indicators displayed to the user for easy navigation. For
example Status messages, consent warning messages, invalid or abnormal indicators, crossed out
record to indicate a lab was cancelled.
State Description Tooltip Icon
Success The query is complete and all
data is currently being displayed.
All data is up to date. Note: no data is
coming from the OLIS database. Adjust
the timeline to 1 year
Pending The query is still in progress. Retrieving new data. OLIS data is
loading
Error There was a problem completing
the query; not all available data
is being displayed.
There was a problem getting new data,
refresh your browser. If the problem
persists contact your helpdesk. Problem
loading OLIS data
Table 16: Lab and Pathology Results, Status Indicators
ConnectingGTA User Guide September 2015 Page 126
If the query has successfully completed, but no data is returned, a ‘No results available’ message will
display at the bottom of the List section.
While the data has partially loaded and is still pending, in addition to the icon, a yellow banner may
appear to indicate that more data is pending.
Error Messages
If there is a system issue, an error message will display with an error number and a short descriptive
message
System Error Messages
Message: “One or more data sources took too long to respond. Not all results may be shown.”
Reason: Unable to process message
Message: “There was an error accessing the component service. No data is available. Contact the
helpdesk.”
Reasons:
• SOAP Errors
• Unsupported message type
• Unable to extract content
• Data or identifiers are not valid
• Health Card reported lost, stolen, version code is incorrect
• Not authorized users
• Patient doesn’t have OHIP coverage
• Patient name, sex, and/or date of birth is not current
• Host Processing Error
Message: “The patient could not be found in OLIS. Please contact the ConnectingGTA Help Desk
for assistance.”
Reason: The health card number submitted for the patient (as stored in the Client Registry) does
not match the health card number OLIS has recorded for the patient.
Message: “Warning: Some or all of the requested laboratory information was not returned due to
a patient consent directive”.
Reason: Patient has a consent directive to block his/her records
Table 17: Lab and Pathology Results, System Error Messages
ConnectingGTA User Guide September 2015 Page 127
Printing
The OLIS Full Report contains all the relevant information regarding a single lab order (e.g. results,
comments, administrative info, etc). This is designed to mimic the paper form of the order result a
clinician would typically receive via fax.
Printing in the Lab and Pathology Results portlet uses the Document Viewer and follows OLIS
standards. Printing is allowed “only” from the Document Viewer, where the OLIS Full Report and
attachments are displayed. The printout will contain two headers OLIS and ConnectingGTA header
(DOB and gender fields), footer (Privacy Disclaimer) and body (the report content).
For more detail, refer to Printing from Document Viewer.
Note: Printing of the Lab and Pathology Results list is not available.
Consent Directive
The user may encounter a consent directive when trying to access OLIS information. A consent
directive is a block or restriction on access of Personal Health information (PHI) requested by a
patient or individual. Temporary access is granted when the clinician chooses to override the consent
directive to view Clinical and Laboratory Data. Once an OLIS consent override is in place, the OLIS
data access is available temporarily for 4 hours. Once the time frame expires the user will be
prompted to override consent and to enter the reason for the override.
Refer to Overriding Consent for details.
OLIS has a consent directive capability which gives patients or their substitute decision maker(s)
(SDM) the option to withhold or withdraw his or her consent for the collection, use, and disclosure of
all or some of his or her PHI. The patient’s OLIS data will remain accessible to authorized health
information custodians and their agents, until a consent directive (test-level or patient-level) is
applied to the patient’s OLIS data.
Patients have the option to apply the following type of consent directives:
1. Record-level Block: Restricts access to specific test request(s) for that patient, subject to
certain exceptions. For example, a patient has 10 records, but only 5 out of the 10 are
blocked.
2. Patient-level Block: This is a block-all directive that will restrict access to all OLIS data
(Orders and Reports), subject to certain exceptions. For example, if the patient has 10
records, all 10 records are blocked.
Note: all consent directive overrides are monitored by the Privacy Officer for auditing purposes.
ConnectingGTA User Guide September 2015 Page 128
Community
The Community portlet displays a list of all community type referrals, including Community Care
Access Centre (CCAC) referrals, for the selected patient within the time period selected on the
timeline. Any referral that started, finished, or is ongoing during the selected timeline range will
display.
Figure 166: Community Portlet
The standard (default) columns as displayed above are:
Column Description
Referral Start Date Referral date to the CCAC
Referral Type Type of referral (e.g., Long Term Placement, Short Stay Respite, Rehab,
etc.)
Reason for Referral Reason for the referral
Service Details
Attachment icon will display when documents are available for viewing.
Click on the “View” icon with the row selected, double click the row, or
click directly on the attachment icon to open the Document Viewer with
the document of interest displayed (Viewing Documents).
Organization The facility or organization associated with the referral.
Referral Close Date
End date for the referral.
Note: The presence of a referral close date can indicate that the referral
is no longer active.
Table 18: Community Data Elements
ConnectingGTA User Guide September 2015 Page 129
Service Details
All community-related documents sent to the solution by sites will be displayed in the Community
portlet. This includes documents such as:
Medical Equipment and Supplies
Service Details
Client Risk
CCAC Referral including long term care service details
Client Safety Issues
Note: Referral Assessment documents will not be displayed in the Community portlet; this document
will be found in the Documents/Notes portlet.
If there are more than 20 documents, a message will be displayed.
Figure 167: Too many matching documents
Preferences
By default, the Community portlet shows all available columns. Users can set preference for the
portlet list using two methods.
A. Adjust preferences directly on the list
Adjust the width of any column (Column Width).
Hide any of the columns from the display (Hide or Show Columns).
Sort the list by any column in ascending or descending order (Sorting)
Filter the list by the date column (Filtering).
Note: Above preferences are not saved after navigating away from the portlet.
ConnectingGTA User Guide September 2015 Page 130
B. Personalize the list by clicking on the ‘User Preferences’ button .
Change which columns are displayed and the order they are in (Modify Columns)
Select which column should be used as the default sort (Change Default Sort)
Specify the number of data rows to display (Set Content Area Height)
Reset to system defaults (Reset to System Default)
Note:
If there are more rows than space available, use paging controls to see more rows or change
the default number of rows per page (Paging).
To print the Community portlet list, click the print icon (Printing from List Views).
ConnectingGTA User Guide September 2015 Page 131
Icons
Icon Name Description
Add/Remove Patient From the patient banner, open a window to
add/remove the current patient from a list
Add to… From My Recent Patients list, open a window to
add/remove the current patient from a list
Alert/Warning Indicates critical data that should be reviewed
Attachment Click to open attachment in the Document
Viewer
Calendar Open the calendar window to select a date
Comment
There is a comment attached to the item, or the
full text is available. To view the comment,
hover the pointer over the icon.
Delete Remove the patient from My Patients List
Drop Down Click to open a menu
Expand row Expand the data to show all the rows, or all
details.
Collapse row Collapse the data to hide the rows, showing only
the main or heading row.
Expand All/Collapse
All
Expand or collapse all rows on the component.
Click this icon to toggle between showing and
hiding the rows.
Information Show additional information or notes
Error
Lab Portlet - There was a problem getting data,
refresh your browser. If the problem persists
contact your helpdesk.
Loading Lab Portlet - Retrieving new data…
Complete Lab Portlet - All data is up to date
Result Comments Lab Portlet – test result comments available
First Page Paging - display the first page of data.
Previous Page Paging - display the previous page of data.
ConnectingGTA User Guide September 2015 Page 132
Next Page Paging - display the next page of data.
Last Page Paging - display the last page of data.
Print Click to open the print preview window to view
and/or print the selected list view.
Click to open the print preview window to view
and/or print attachments from the Document
Viewer.
Refresh Redisplay the list with current data.
Search for a patient Click to open Patient Search and Selection dialog
Show/Hide Show more or less data on the patient banner
Sort Order Data is sorted on this column in ascending (
) or descending ( ) order.
Previous/Next Timeline - show the previous or next time range
on the timeline
End Point Slider Timeline - beginning and ending termination
point on the timeline
Today Timeline - indicator of today’s date and time on
the timeline
Inpatient Visit
Timeline – a blue line marks an inpatient visit on
the timeline. Click to adjust the timeline to
become two weeks before and two weeks after
the selected visit.
Ambulatory Visit
Timeline – marks an ambulatory (outpatient)
visit on the timeline. Click to adjust the timeline
to become two weeks before and two weeks
after the selected visit.
Emergency
Department Visit
Timeline – marks an ED visit on the timeline.
Click to adjust the timeline to become two weeks
before and two weeks after the selected visit.
User Preferences
(Options)
Click to open Configure My Grid dialog and set
user preferences
View Click to view patient record in Patient Care tab
View Click to view record details
ConnectingGTA User Guide September 2015 Page 133
Visits/Encounters Icon for the Visits/Encounters and Summary
Reports portlet
Documents/Notes Icon for the Documents/Notes portlet
Lab and Pathology
Results
Icon for the Lab and Pathology Results portlet
DI Reports Icon for the DI Reports portlet
Other Results Icon for the Other Results portlet
Community Icon for the Community portlet
Custom View Icon for any custom view created by the user
Completed Patient Search – required field was successfully
completed
Invalid Patient Search – required field was not
completed successfully
Edit Mode Navigation bar – click to enter Edit Mode for
creating & editing custom views
View Mode Navigation bar – click to enter View Mode (from
Edit Mode)
Collapse Patient Data
Views
Navigation bar – click to view only icons
Expand Patient Data
Views
Navigation bar – click to view icons and text
description