Connecting the Wattbike to Zwift Via Bluetooth

Compatible DevicesRecomended System Specs for Running Zwift (For Computer Software)

OS:

Windows 7 64bit or higheror OS X 10.7 or higher

Mac laptop/ desktop from 2012 and above will have a BLE chip inside. Please check your PCs settings.

Processor:

Dual Intel® Core™ i5 or AMD

Memory:

8GB

Graphics:

2GB Radeon R9 200 series,or NVIDIA GTX 650

Hard Drive:4GB of free space

Wattbike and Device Specifications

Wattbike Model B with Bluetooth

Firmware 1.24 installed

Apple:

iPhone, iPad or iPod touch running iOS 8.0 or later

Android:

Requires Jelly Bean 4.2 and up on Phone and Tablet

Connecting the Wattbike to the Zwift app and Mac & PC softwareThe Wattbike can be connected to Zwift using either just the software on its own or software and phone app in conjuction.

The phone app acts as a remote to the software, so you can control your ride whilst staying comfortably in the saddle. The Zwift computer software uses Wifi to talk to the mobile app and the mobile app uses BLE to connect to your phone. Connect to the same wifi network as your computer for Zwift to work.

To connect your set up:

a) Open the Zwift software on your PC or Mac and Phone or Tablet

b) Turn on the Wattbike Performance Monitor (WPM), ensure that BLE is on (small icon should show at the bottom of the screen). If your monitor has a BLE but it is not on head to Settings-> 'Remote' Tab->Turn BLE on.

c) Open the Zwift app on your phone and navigate to Settings -> Sensors -> Bluetooth LE and turn onthis setting.

wattbike.com @wattbike /Wattbike

Ensure your phone is connected to WiFi, If your set up doesn't automatically detect the set up touch the connect to button in the top right hand corner and select your computer-Zwift set up. Once the app is connected to your platform you can now ride. Se

e)

d) Navigate through Zwift computer software to the pair devices screen, in turn press search on all the sensorswhich you would like to connect to. The WPM will only show in the ‘Power Source’ and ‘Cadence’ in Zwift.ANT+* or BLE heart rate sensors can be added at this point The Wattbike's sensor number is the ID numberat the bottom of the WPM screen (also the last 5 digits on the back of the monitor). Once you haveselected your sensors, press okay.

*To connect an ANT+ Heart Rate belt insert an ANT+ dongle into your computer.