complete cataloge title page - rite idler - cema conveyor ......our series 65 idlers meet cema f...

CEMA E Specialty Products Measuring Guides

Technical Catalogue

Series 25 Our series 25 idlers meet CEMA C standards and are designed for medium duty applications. The bearing is a 6205 with a 25mm shaft diameter. The rolls in this series are available in 4", 5" and 6" diameter rolls. Series 25 idlers can accommodate belt widths from 18 to 72 inches.

Series 30Our series 30 idlers meet CEMA D standards and are designed for medium and heavy duty applications. The bearing is a 6306 with a 30mm shaft diameter. The rolls in this series are available in 5" and 6" diameter rolls. Series 30 idlers can accommodate belt widths up to 72 inches.

Series 40Our series 40 idlers meet CEMA E standards and are designed for severe heavy duty applications. The bearing is a 6308 with a 40mm shaft diameter. The rolls in this series are available in 6" and 7" diameter steel rolls, as well as 8" and 9" diameter rubber rolls. Series 40 idlers can accommodate belt widths from 36 to 102 inches.

Series 65Our series 65 idlers meet CEMA F standards and are designed for extreme severe heavy duty applications. These are custom-made designs to suit specific application needs. The rolls are available in 7" diameter steel, or in rubber up to 16" diameter. Series 65 idlers can be made to fit a minimum belt width of 60 inches.

Specialty ProductsWe can custom design the solution to all your conveyor idler needs. Some of the specialty products that we manufacture are:• Extreme duty impact idlers that surpass CEMA F standards.• Inverted “V” 3 roll return trainers that do not suffer from debris build up and failure like other trainers.• 3 roll return idlers provide tracking and belt cleaning capabilities.• Custom-designed guide rolls to fit your application.• Retractable idler frames that provide you with the capability to remove all three rolls without lifting the

belt out of the way!• Idler frames with removable end brackets to make wing roll removal easier.

Solutions to solve abrasion and corrosion problems including:• Ceramic and epoxy coatings applied to rolls and galvanized frames.• Roll sleeving with HDPE, urethane, UHMW and PVC.• Rubber rolls such as: vulcanized SBR rubber, and pure gum natural rubber to aid in abrasion or

wear resistance and to reduce material build up on rolls.

The Products

Series 40 Idlers

CEMA E Severe Duty Service Available in belt widths from 36” to 102”

SERIES 406 (STYLE 02)

Note: Dimensions subject to change, certified dimensions of ordered material furnished on request.

INLINE TROUGHED IDLER (for 6 inch/150mm dia. ROLL)

BELT WIDTH A B C D E H ROLL WGT IDLER WGTIDLER NUMBER

in./mm in. mm in. mm in. mm in. mm in. mm in. mm lbs kg Lbs kg

20 Degree

4060220-36 36/900 13.20 335 40.43 1026 15.13 384 45 1143 47.99 1218 10.46 266 20.50 9.32 109.0 49.6

4060220-42 42/1050 15.37 390 46.67 1185 15.87 403 51 1295 53.99 1370 10.46 266 25.50 11.60 121.00 55.0

4060220-48 48/1200 17.34 440 52.35 1329 16.54 420 57 1448 60.00 1523 10.46 266 29.50 13.40 136.50 60.05

4060220-54 54/1350 19.31 490 58.02 1473 17.21 427 63 1600 66.00 1675 10.46 266 33.50 15.20 152.00 69.10

4060220-60 60/1500 21.47 545 64.26 1631 17.95 456 69 1753 72.00 1828 10.46 266 37.50 17.05 168.50 76.59

4060220-66 66/1675 23.25 590 69.36 1761 18.56 471 75 1905 78.00 1980 10.46 266 39.50 17.95 174.00 79.10

4060220-72 72/1800 25.41 645 75.60 1919 20.05 509 81 2057 84.00 2132 11.21 285 41.26 18.75 179.75 81.70

4060220-78 78/1981 27.58 700 81.84 2077 20.79 528 87 2210 90.00 2285 11.21 285 45.96 20.89 193.85 88.10

4060220-84 84/2133 29.75 755 88.08 2236 22.43 569 93 2362 96.00 2437 12.11 307 48.29 21.95 200.84 91.30

4060220-96 96/2438 32.70 830 96.64 2453 23.45 595 105 2667 108.00 2742 12.11 307 54.45 24.75 226.31 103.0

4060220-102 102/2590 35.46 900 104.53 2653 24.39 619 111 2819 114.00 2894 12.11 307 55.70 25.35 230.06 105.0

35 Degree

4060235-36 36/900 13.20 335 36.75 933 18.22 462 45 1143 47.99 1218 10.46 266 20.50 9.32 109.0 49.6

4060235-42 42/1050 15.37 390 42.47 1078 19.46 494 51 1295 53.99 1370 10.46 266 25.50 11.60 121.50 55.20

4060235-48 48/1200 17.34 440 47.67 1210 20.59 523 57 1448 60.00 1523 10.46 266 29.50 13.40 139.00 63.2

4060235-54 54/1350 19.31 490 52.87 1342 21.72 551 63 1600 66.00 1675 10.46 266 33.50 15.20 154.50 70.20

4060235-60 60/1500 21.47 545 58.58 1487 22.96 583 69 1753 72.00 1828 10.46 266 37.50 17.05 171.00 77.70

4060220-66 66/1675 23.25 590 63.26 1606 23.98 609 75 1905 78.00 1980 10.46 266 39.50 17.95 175.50 79.80

4060235-72 72/1800 25.41 645 68.98 1751 26.00 660 81 2057 84.00 2132 11.21 285 41.26 18.75 182.75 83.10

4060235-78 78/1981 27.58 700 74.47 1890 27.23 691 87 2210 90.00 2285 11.21 285 45.96 20.89 196.85 89.50

4060235-84 84/2133 29.75 755 80.19 2035 29.35 745 93 2362 96.00 2437 12.11 307 48.29 21.95 204.84 93.10

4060235-96 96/2438 32.70 830 88.03 2234 31.05 788 105 2667 108.00 2742 12.11 307 54.45 24.75 231.00 105.0

4060235-102 102/2590 35.46 900 95.27 2418 32.62 828 111 2819 114.00 2894 12.11 307 55.70 25.35 234.89 107.0

45 Degree

4060245-36 36/900 13.20 335 32.77 832 19.85 504 45 1143 47.99 1218 10.46 266 20.50 9.32 109.0 49.6

4060245-42 42/1050 15.37 390 38.00 964 21.69 543 51 1295 53.99 1370 10.46 266 25.50 11.60 121.00 56.6

4060245-48 48/1200 17.34 440 42.75 1085 22.78 578 57 1448 60.00 1523 10.46 266 29.50 13.40 136.50 63.4

4060245-54 54/1350 19.31 490 47.51 1206 24.17 614 63 1600 66.00 1675 10.46 266 33.50 15.20 152.00 71.1

4060245-60 60/1500 21.47 545 52.74 1339 25.70 652 69 1753 72.00 1828 10.46 266 37.50 17.05 168.50 78.6

4060220-66 66/1675 23.25 590 57.02 1447 26.96 684 75 1905 78.00 1980 10.46 266 39.50 17.95 174.00 80.7

4060245-72 72/1800 25.41 645 62.25 1580 29.25 743 81 2057 84.00 2132 11.21 285 41.26 18.75 179.75 84.0

4060245-78 78/1981 27.58 700 67.48 1713 30.79 781 87 2210 90.00 2285 11.21 285 45.96 20.89 193.85 90.4

4060245-84 84/2133 29.75 755 72.72 1846 33.19 842 93 2362 96.00 2437 12.11 307 48.29 21.95 200.84 94.0

4060245-96 96/2438 32.70 830 80.09 2033 35.29 896 105 2667 108.00 2742 12.11 307 54.45 24.75 226.31 106.0

4060245-102 102/2590 35.46 900 86.51 2196 37.23 945 111 2819 114.00 2894 12.11 307 55.70 25.35 230.06 108.0


INLINE TROUGHED VULCANIZED IMPACT IDLER (for 6 inch/150mm dia. ROLL)


BELT

WIDTH A B C D E H ROLL WT IDLER WTIDLER

NUMBERin./mm in mm in mm in Mm in mm in mm in mm lbs kg Lbs Kg

20 Degree

4060420-36 36/900 13.20 335 40.43 1026 15.13 384 45 1143 47.99 1218 10.46 266 20.50 9.32 109 49.6

4060420-42 42/1050 15.370 390 46.67 1185 15.87 403 51 1295 53.99 1370 10.46 266 25.50 11.6 121.00 55.0

4060420-48 48/1200 17.340 440 52.35 1329 16.54 420 57 1448 60.00 1523 10.46 266 29.50 13.4 136.50 60.1

4060420-54 54/1350 19.310 490 58.02 1473 17.21 427 63 1600 66.00 1675 10.46 266 33.50 15.2 152.00 69.1

4060420-60 60/1500 21.470 545 64.26 1631 17.95 456 69 1753 72.00 1828 10.46 266 37.50 17.05 168.50 76.6

4060420-66 66/1675 23.25 590 69.36 1761 18.56 471 75 1905 78.00 1980 10.46 266 39.50 17.95 174.00 79.1

4060420-72 72/1800 25.41 645 75.60 1919 20.05 509 81 2057 84.00 2132 11.21 285 41.26 18.75 179.75 81.7

4060420-78 78/1981 27.58 700 81.84 2077 20.79 528 87 2210 90.00 2285 11.21 285 45.96 20.89 193.85 88.1

4060420-84 84/2133 29.75 755 88.08 2236 22.43 569 93 2362 96.00 2437 12.11 307 48.29 21.95 200.84 91.3

4060420-96 96/2438 32.70 830 96.64 2453 23.45 595 105 2667 108.00 2742 12.11 307 54.45 24.75 226.31 103

4060420-102 102/2590 35.46 900 104.53 2653 24.39 619 111 2819 114.00 2894 12.11 307 55.70 25.35 230.06 105

35 Degree

4060420-36 36/900 13.20 335 36.75 933 18.22 462 45 1143 47.99 1218 10.46 266 20.50 9.32 109 49.6

4060435-42 42/1050 15.370 390 42.47 1078 19.46 494 51 1295 53.99 1370 10.46 266 25.50 11.6 121.50 55.2

4060435-48 48/1200 17.340 440 47.67 1210 20.59 523 57 1448 60.00 1523 10.46 266 29.50 13.4 139.00 63.2

4060435-54 54/1350 19.310 490 52.87 1342 21.72 551 63 1600 66.00 1675 10.46 266 33.50 15.2 154.5 70.2

4060435-60 60/1500 21.470 545 58.58 1487 22.96 583 69 1753 72.00 1828 10.46 266 37.50 17.05 171.00 77.7

4060435-66 66/1675 23.25 590 63.26 1606 23.98 609 75 1905 78.00 1980 10.46 266 39.50 17.95 175.50 79.8

4060435-72 72/1800 25.41 645 68.98 1751 26.00 660 81 2057 84.00 2132 11.21 285 41.26 18.75 182.75 83.1

4060435-78 78/1981 27.58 700 74.47 1890 27.23 691 87 2210 90.00 2285 11.21 285 45.96 20.89 196.85 89.5

4060435-84 84/2133 29.75 755 80.19 2035 29.35 745 93 2362 96.00 2437 12.11 307 48.29 21.95 204.84 93.1

4060435-96 96/2438 32.70 830 88.03 2234 31.05 788 105 2667 108.00 2742 12.11 307 54.45 24.75 231.00 105

4060435-102 102/2590 35.46 900 95.27 2418 32.62 828 111 2819 114.00 2894 12.11 307 55.70 25.35 234.89 107

45 Degree

4060420-36 36/900 13.20 335 32.77 832 19.85 504 45 1143 47.99 1218 10.46 266 20.50 9.32 112 50.9

4060445-42 42/1050 15.370 390 38.00 964 21.69 543 51 1295 53.99 1370 10.46 266 25.50 11.6 124.50 56.6

4060445-48 48/1200 17.340 440 42.75 1085 22.78 578 57 1448 60.00 1523 10.46 266 29.50 13.4 139.5 63.4

4060445-54 54/1350 19.310 490 47.51 1206 24.17 614 63 1600 66.00 1675 10.46 266 33.50 15.2 156.5 71.1

4060445-60 60/1500 21.470 545 52.74 1339 25.70 652 69 1753 72.00 1828 10.46 266 37.50 17.05 173.0 78.6

4060445-66 66/1675 23.25 590 57.02 1447 26.96 684 75 1905 78.00 1980 10.46 266 39.50 17.95 177.5 80.7

4060445-72 72/1800 25.41 645 62.25 1580 29.25 743 81 2057 84.00 2132 11.21 285 41.26 18.75 184.85 84.0

4060445-78 78/1981 27.58 700 67.48 1713 30.79 781 87 2210 90.00 2285 11.21 285 45.96 20.89 198.85 90.4

4060445-84 84/2133 29.75 755 72.72 1846 33.19 842 93 2362 96.00 2437 12.11 307 48.29 21.95 206.84 94.0

4060445-96 96/2438 32.70 830 80.09 2033 35.29 896 105 2667 108.00 2742 12.11 307 54.45 24.75 234.00 106.0

4060445-102 102/2590 35.46 900 86.51 2196 37.23 945 111 2819 114.00 2894 12.11 307 55.70 25.35 237.00 108.0


RETURN BELT IDLER (STEEL) (for 6 inch/150mm dia. ROLL)


BELT WIDTH A B C IDLER WTIDLER NUMBER

in./mm in mm in mm in mm lbs kg

4062300-30 30/750 32.80 833 39.00 990 41.00 1040 63.25 28.75

4062300-36 36/900 38.70 983 45.00 1143 47.00 1194 70.75 32.15

4062300-42 42/1050 44.80 1138 51.00 1295 53.00 1345 79.25 36.02

4062300-48 48/1200 50.71 1288 57.00 1450 59.00 1499 87.75 39.89

4062300-54 54/1350 56.81 1443 63.00 1600 65.00 1650 96.25 43.75

4062300-60 60/1500 62.72 1593 69.00 1750 71.00 1805 104.75 47.61

4062300-66 66/1675 69 1746 75.00 1905 78.00 1980 113.25 51.47

4062300-72 72/1800 74.72 1898 81.00 2057 83.00 2108 115.25 52.38

4062300-78 78/1981 80.98 2057 87.00 2210 89.00 2261 123 55.91

4062300-84 84/2133 87.00 2210 93.00 2362 95.00 2413 130 59.1

4062300-96 96/2438 99 2508 105.00 2667 107.00 2718 138.5 62.96

4062300-102 102/2590 105 2661 109.00 2819 111.00 2870 147 66.82

SERIES 406 (STYLE 24TQ)

THREE ROLL “V” RETURN IDLER (for 6 inch/150mm dia. ROLL)


BELT WIDTH A B C D E H ROLL WGT IDLER WGTIDLER NUMBER

in./mm in. mm in. mm in. mm in. mm in. mm in. mm lbs kg lbs kg

3062415-42TQ 42/1050 14.96 380 51 1295 55.25 1403 11.6 295 14.13 359 8.15 207 25.5 11.6 121 55

3062415-48TQ 48/1200 16.930 430 57 1448 61.25 1556 11.6 295 14.13 359 8.15 207 29.5 13.4 136.5 60.05

3062415-54TQ 54/1350 19.020 483 63 1600 67.25 1708 11.6 295 14.13 359 8.15 207 33.5 15.2 152 69.1

3062415-60TQ 60/1500 21.020 534 69 1753 73.25 1861 11.6 295 14.13 359 8.15 207 37.5 17.05 168.5 76.59

3062415-72TQ 72/1800 24.920 633 81 2057 85.25 2165 11.6 295 14.13 359 8.15 207 41.26 18.75 179.75 81.7


INVERTED THREE ROLL “V” RETURN BELT IDLER (STEEL) (for 6 inch/150mm dia. ROLL)


BELT WIDTH A B C ROLL WT IDLER WTIDLER NUMBER

in./mm in mm in mm in mm lbs kg lbs kg

4063905-42TQ 42/1050 14.96 380 51 1295 55 1400 25.5 11.6 135.2 61.5

4063905-48TQ 48/1200 16.93 430 57 1448 61 1552 29.5 13.4 163.2 74.2

4063905-54TQ 54/1350 19.02 483 63 1600 67 1704 33.5 15.2 191.2 86.9

4063905-60TQ 60/1500 21.02 534 69 1753 73 1857 37.5 17.05 219.2 99.6

4063905-72TQ 72/1800 24.92 633 81 2057 85 2161 41.26 18.75 247.2 112.4


FLAT STEEL CARRIER IDLER (for 6 inch/150mm dia. ROLL)




4064000-42 42/1050 44.800 1138 51.000 1295 53.000 1345 72.5 32.89

4064000-48 48/1200 50.710 1288 57.000 1450 59.000 1499 81 36.74

4064000-54 54/1350 56.810 1443 63.000 1600 65.000 1650 89.5 40.6

4064000-60 60/1500 62.720 1593 69.000 1750 71.000 1805 98 44.45


3 ROLL SUSPENDED (CATENARY) TROUGH IDLER (for 6 inch/150mm dia. ROLL)




20 DEGREE

4068520-18 18/450 6.540 166 23.500 597 2.125 54 41.5 18.7

4068520-20 20/500 7.280 185 25.000 635 2.625 67 44.5 20

4068520-24 24/600 8.660 220 29.250 743 2.875 73 50.5 22.7

4068520-30 30/750 10.630 270 35.000 889 3.500 89 59.5 26.8

4068520-36 36/900 12.600 320 40.750 1035 4.250 108 68.5 30.8

4068520-42 42/1050 14.960 380 47.000 1194 5.125 130 76.3 34.3

4068520-48 48/1200 16.930 430 53.750 1340 5.750 146 88.3 39.7

4068520-54 54/1350 19.020 483 58.500 1486 6.375 162 100.3 45.1

4068520-60 60/1500 21.020 534 64.250 1632 7.000 178 112.3 50.5

35 DEGREE

4068535-18 18/450 6.540 166 20.000 508 4.125 105 41.5 18.7

4068535-20 20/500 7.280 185 21.500 546 4.500 114 44.5 20

4068535-24 24/600 8.660 220 25.000 635 5.375 137 50.5 22.7

4068535-30 30/750 10.630 270 30.500 775 6.500 165 59.5 26.8

4068535-36 36/900 12.600 320 35.750 908 7.625 194 68.5 30.8

4068535-42 42/1050 14.960 380 41.750 1060 8.875 225 76.3 34.3

4068535-48 48/1200 16.930 430 47.000 1194 10.000 254 88.3 39.7

4068535-54 54/1350 19.020 483 52.250 1334 11.125 283 100.3 45.1

4068535-60 60/1500 21.020 534 57.500 1461 12.250 311 112.3 50.5

45 DEGREE

4068545-18 18/450 6.540 166 17.750 450 5.125 130 41.5 18.7

4068545-20 20/500 7.280 185 19.250 489 5.500 140 44.5 20

4068545-24 24/600 8.660 220 22.500 572 6.500 165 50.5 22.7

4068545-30 30/750 10.630 270 27.500 699 8.000 203 59.5 26.8

4068545-36 36/900 12.600 320 32.250 819 9.375 238 68.5 30.8

4068545-42 42/1050 14.960 380 37.625 956 10.875 276 76.3 34.3

4068545-48 48/1200 16.930 430 42.500 1080 12.250 311 88.3 39.7

4068545-54 54/1350 19.020 483 47.375 1203 13.625 346 100.3 45.1

4068545-60 60/1500 21.020 534 52.250 1327 15.000 381 112.3 50.5


3 ROLL SUSPENDED (CATENARY) TROUGH IMPACT IDLER (for 6 inch/150mm dia. ROLL)




20 DEGREE

4068620-42 42/1050 14.960 380 47.000 1194 5.125 130 65.5 29.71

4068620-48 48/1200 16.930 430 53.750 1340 5.750 146 74.5 33.79

4068620-54 54/1350 19.020 483 58.500 1486 6.375 162 83.5 37.87

4068620-60 60/1500 21.020 534 64.250 1632 7.000 178 92.5 41.95

35 DEGREE

4068635-42 42/1050 14.960 380 41.750 1060 8.875 225 65.5 29.71

4068635-48 48/1200 16.930 430 47.000 1194 10.000 254 74.5 33.79

4068635-54 54/1350 19.020 483 52.250 1334 11.125 283 83.5 37.87

4068635-60 60/1500 21.020 534 57.500 1461 12.250 311 92.5 41.95

45 DEGREE

4068645-42 42/1050 14.960 380 37.625 956 10.875 276 65.5 29.71

4068645-48 48/1200 16.930 430 42.500 1080 12.250 311 74.5 33.79

4068645-54 54/1350 19.020 483 47.375 1203 13.625 346 83.5 37.87

4068645-60 60/1500 21.020 534 52.250 1327 15.000 381 92.5 41.95

BELT WIDTH A B C F IDLER WTIDLER NUMBER

in./mm in mm in mm in mm in mm lbs kg

20 DEGREE

4068720-18 18/450 6.540 166 26.500 673 3.125 79 8.66 220 47.5 21.55

4068720-24 24/600 8.660 220 32.500 826 3.875 98 10.63 270 56.5 25.63

4068720-30 30/750 10.630 270 38.000 965 4.500 114 12.6 320 65.5 30

4068720-36 36/900 12.600 320 43.875 1115 5.375 137 14.96 380 73.7 33.43

4068720-42 42/1050 14.960 380 50.125 1273 6.250 159 16.93 430 84.3 38.24

4068720-48 48/1200 16.930 430 55.875 1419 6.875 175 19.02 483 96.3 43.68

4068720-54 54/1350 19.020 483 61.625 1565 7.500 191 21.02 534 108.3 49.12

35 DEGREE

4068735-18 18/450 6.540 166 23.000 584 5.125 130 8.66 220 47.5 21.55

4068735-24 24/600 8.660 220 28.000 711 6.375 162 10.63 270 56.5 25.63

4068735-30 30/750 10.630 270 33.500 851 7.500 191 12.6 320 65.5 30

4068735-36 36/900 12.600 320 38.875 988 8.750 222 14.96 380 73.7 33.43

4068735-42 42/1050 14.960 380 44.875 1140 10.000 254 16.93 430 84.3 38.24

4068735-48 48/1200 16.930 430 51.125 1299 11.125 283 19.02 483 96.3 43.68

4068735-54 54/1350 19.020 483 56.375 1432 12.250 311 21.02 534 108.3 49.12

45 DEGREE

4068745-18 18/450 6.540 166 20.750 527 6.125 156 8.66 220 47.5 21.55

4068745-24 24/600 8.660 220 25.500 648 7.500 191 10.63 270 56.5 25.63

4068745-30 30/750 10.630 270 30.500 775 9.000 230 12.6 320 65.5 30

4068745-36 36/900 12.600 320 35.375 899 10.500 267 14.96 380 73.7 33.43

4068745-42 42/1050 14.960 380 40.750 1035 12.000 305 16.93 430 84.3 38.24

4068745-48 48/1200 16.930 430 45.625 1159 13.375 340 19.02 483 96.3 43.68

4068745-54 54/1350 19.020 483 50.500 1283 14.750 375 21.02 534 108.3 49.12


3 ROLL SUSPENDED (CATENARY) TROUGH IDLER c/w EXTENDED WING ROLLS

(for 6 inch/150mm dia. ROLL)


BELT WIDTH A B C F IDLER WTIDLER NUMBER

in./mm in mm in mm in mm in mm lbs kg

20 DEGREE

4068820-42 42/1050 14.960 380 50.125 1273 6.250 159 16.93 430 71.5 32.2

4068820-48 48/1200 16.930 430 55.875 1419 6.875 175 19.02 483 80.5 36.5

4068820-54 54/1350 19.020 483 61.625 1565 7.500 191 21.02 534 89.5 40.6

35 DEGREE

4068835-42 42/1050 14.960 380 44.875 1140 10.000 254 16.93 430 71.5 32.2

4068835-48 48/1200 16.930 430 51.125 1299 11.125 283 19.02 483 80.5 36.5

4068835-54 54/1350 19.020 483 56.375 1432 12.250 311 21.02 534 89.5 40.6

45 DEGREE

4068845-42 42/1050 14.960 380 40.750 1035 12.000 305 16.93 430 71.5 32.2

4068845-48 48/1200 16.930 430 45.625 1159 13.375 340 19.02 483 80.5 36.5

4068845-54 54/1350 19.020 483 50.500 1283 14.750 375 21.02 534 89.5 40.6


3 ROLL SUSPENDED (CATENARY) TROUGH IMPACT IDLER c/w EXTENDED WING ROLLS

(for 6 inch/150mm dia. ROLL)



INLINE TROUGHED IDLER (for 7 inch/178mm dia. ROLL)


BELT



20 Degree

4070220-36 36/900 13.20 335 39.89 1012 16.61 396 45 1143 47.99 1218 11.00 279 23.99 10.90 120.00 54.6

4070220-42 42/1050 15.370 390 46.33 1176 16.38 416 51 1295 53.99 1370 11.00 279 29.84 13.56 133.00 60.5

4070220-48 48/1200 17.340 440 52.00 1320 17.05 433 57 1448 60.00 1523 11.00 279 34.52 15.69 150.00 68.2

4070220-54 54/1350 19.310 490 57.68 1464 17.73 450 63 1600 66.00 1675 11.00 279 39.20 17.82 167.20 76.0

4070220-60 60/1500 21.470 545 63.91 1622 18.47 469 69 1753 72.00 1828 11.00 279 43.88 19.95 185.35 84.3

4070220-66 66/1675 23.25 590 69.02 1752 19.07 484 75 1905 78.00 1980 11.00 279 46.22 21.01 191.40 87.0

4070220-72 72/1800 25.41 645 75.26 1910 20.52 521 81 2057 84.00 2132 11.71 297 48.27 21.94 197.73 89.9

4070220-78 78/1981 27.58 700 81.50 2069 21.26 540 87 2210 90.00 2285 11.71 297 53.77 24.44 213.25 96.9

4070220-84 84/2133 29.75 755 87.74 2227 22.91 581 93 2362 96.00 2437 12.61 320 56.5 25.68 220.92 100.0

4070220-96 96/2438 32.70 830 96.25 2443 23.92 607 105 2667 108.00 2742 12.61 320 63.71 28.96 248.94 113.0

4070220-102 102/2590 35.46 900 104.19 2644 24.03 611 111 2819 114.00 2894 12.61 320 65.17 29.62 253.00 115.0

35 Degree

4070235-36 36/900 13.20 335 35.96 913 18.63 473 45 1143 47.99 1218 11.00 279 23.99 10.90 120.00 54.6

4070235-42 42/1050 15.370 390 41.68 1058 19.87 504 51 1295 53.99 1370 11.00 279 29.84 13.56 133.00 60.5

4070235-48 48/1200 17.340 440 46.87 1190 21.00 533 57 1448 60.00 1523 11.00 279 34.52 15.69 150.00 68.2

4070235-54 54/1350 19.310 490 52.07 1322 22.13 562 63 1600 66.00 1675 11.00 279 39.20 17.82 167.20 76.0

4070235-60 60/1500 21.470 545 57.79 1467 23.37 593 69 1753 72.00 1828 11.00 279 43.88 19.95 185.35 84.3

4070235-66 66/1675 23.25 590 62.47 1586 24.39 619 75 1905 78.00 1980 11.00 279 46.22 21.01 191.40 87.0

4070235-72 72/1800 25.41 645 68.19 1731 26.41 670 81 2057 84.00 2132 11.71 297 48.27 21.94 197.73 89.9

4070235-78 78/1981 27.58 700 73.90 1876 27.64 702 87 2210 90.00 2285 11.71 297 53.77 24.44 213.25 96.9

4070235-84 84/2133 29.75 755 79.62 2021 29.76 755 93 2362 96.00 2437 12.61 320 56.5 25.68 220.92 100.0

4070235-96 96/2438 32.70 830 87.44 2219 31.45 798 105 2667 108.00 2742 12.61 320 63.71 28.96 248.94 113.0

4070235-102 102/2590 35.46 900 94.69 2403 33.03 839 111 2819 114.00 2894 12.61 320 65.17 29.62 253.00 115.0

45 Degree

4070245-36 36/900 13.20 335 32.06 814 20.21 513 45 1143 47.99 1218 11.00 279 23.99 10.90 123.00 55.9

4070245-42 42/1050 15.370 390 37.79 946 21.74 552 51 1295 53.99 1370 11.00 279 29.84 13.56 136.00 61.8

4070245-48 48/1200 17.340 440 42.05 1067 23.13 587 57 1448 60.00 1523 11.00 279 34.52 15.69 153.00 69.6

4070245-54 54/1350 19.310 490 46.80 1188 24.53 623 63 1600 66.00 1675 11.00 279 39.20 17.82 171.00 77.7

4070245-60 60/1500 21.470 545 52.03 1321 26.06 661 69 1753 72.00 1828 11.00 279 43.88 19.95 190.00 86.4

4070245-66 66/1675 23.25 590 56.31 1429 27.31 693 75 1905 78.00 1980 11.00 279 46.22 21.01 194.00 88.2

4070245-72 72/1800 25.41 645 61.55 1562 29.61 752 81 2057 84.00 2132 11.71 297 48.27 21.94 201.00 91.4

4070245-78 78/1981 27.58 700 66.78 1693 31.14 790 87 2210 90.00 2285 11.71 297 53.77 24.44 217.00 98.6

4070245-84 84/2133 29.75 755 72.01 1828 33.55 851 93 2362 96.00 2437 12.61 320 56.5 25.68 225.00 102.0

4070245-96 96/2438 32.70 830 79.14 2009 35.64 905 105 2667 108.00 2742 12.61 320 63.71 28.96 253.00 115.0

4070245-102 102/2590 35.46 900 85.75 2178 37.59 954 111 2819 114.00 2894 12.61 320 65.17 29.62 257.00 117.0


INLINE TROUGHED VULCANIZED IMPACT IDLER (for 7 inch/178mm dia. ROLL)


BELT



20 Degree

4070420-36 36/900 13.20 335 39.89 1012 16.61 396 45 1143 47.99 1218 11.00 279 23.99 10.90 120.00 54.6

4070420-42 42/1050 15.370 390 46.33 1176 16.38 416 51 1295 53.99 1370 11.00 279 29.84 13.56 133.00 60.5

4070420-48 48/1200 17.340 440 52.00 1320 17.05 433 57 1448 60.00 1523 11.00 279 34.52 15.69 150.00 68.2

4070420-54 54/1350 19.310 490 57.68 1464 17.73 450 63 1600 66.00 1675 11.00 279 39.20 17.82 167.20 76.0

4070420-60 60/1500 21.470 545 63.91 1622 18.47 469 69 1753 72.00 1828 11.00 279 43.88 19.95 185.35 84.3

4070420-66 66/1675 23.25 590 69.02 1752 19.07 484 75 1905 78.00 1980 11.00 279 46.22 21.01 191.40 87.0

4070420-72 72/1800 25.41 645 75.26 1910 20.52 521 81 2057 84.00 2132 11.71 297 48.27 21.94 197.73 89.9

4070420-78 78/1981 27.58 700 81.50 2069 21.26 540 87 2210 90.00 2285 11.71 297 53.77 24.44 213.25 96.9

4070420-84 84/2133 29.75 755 87.74 2227 22.91 581 93 2362 96.00 2437 12.61 320 56.5 25.68 220.92 100.0

4070420-96 96/2438 32.70 830 96.25 2443 23.92 607 105 2667 108.00 2742 12.61 320 63.71 28.96 248.94 113.0

4070420-102 102/2590 35.46 900 104.19 2644 24.03 611 111 2819 114.00 2894 12.61 320 65.17 29.62 253.00 115.0

35 Degree

4070435-36 36/900 13.20 335 35.96 913 18.63 473 45 1143 47.99 1218 11.00 279 23.99 10.90 120.00 54.6

4070435-42 42/1050 15.370 390 41.68 1058 19.87 504 51 1295 53.99 1370 11.00 279 29.84 13.56 133.00 60.5

4070435-48 48/1200 17.340 440 46.87 1190 21.00 533 57 1448 60.00 1523 11.00 279 34.52 15.69 150.00 68.2

4070435-54 54/1350 19.310 490 52.07 1322 22.13 562 63 1600 66.00 1675 11.00 279 39.20 17.82 167.20 76.0

4070435-60 60/1500 21.470 545 57.79 1467 23.37 593 69 1753 72.00 1828 11.00 279 43.88 19.95 185.35 84.3

4070435-66 66/1675 23.25 590 62.47 1586 24.39 619 75 1905 78.00 1980 11.00 279 46.22 21.01 191.40 87.0

4070435-72 72/1800 25.41 645 68.19 1731 26.41 670 81 2057 84.00 2132 11.71 297 48.27 21.94 197.73 89.9

4070435-78 78/1981 27.58 700 73.90 1876 27.64 702 87 2210 90.00 2285 11.71 297 53.77 24.44 213.25 96.9

4070435-84 84/2133 29.75 755 79.62 2021 29.76 755 93 2362 96.00 2437 12.61 320 56.5 25.68 220.92 100.0

4070435-96 96/2438 32.70 830 87.44 2219 31.45 798 105 2667 108.00 2742 12.61 320 63.71 28.96 248.94 113.0

4070435-102 102/2590 35.46 900 94.69 2403 33.03 839 111 2819 114.00 2894 12.61 320 65.17 29.62 253.00 115.0

45 Degree

4070445-36 36/900 13.20 335 32.06 814 20.21 513 45 1143 47.99 1218 11.00 279 23.99 10.90 123.00 55.9

4070445-42 42/1050 15.370 390 37.79 946 21.74 552 51 1295 53.99 1370 11.00 279 29.84 13.56 136.00 61.8

4070445-48 48/1200 17.340 440 42.05 1067 23.13 587 57 1448 60.00 1523 11.00 279 34.52 15.69 153.00 69.6

4070445-54 54/1350 19.310 490 46.80 1188 24.53 623 63 1600 66.00 1675 11.00 279 39.20 17.82 171.00 77.7

4070445-60 60/1500 21.470 545 52.03 1321 26.06 661 69 1753 72.00 1828 11.00 279 43.88 19.95 190.00 86.4

4070445-66 66/1675 23.25 590 56.31 1429 27.31 693 75 1905 78.00 1980 11.00 279 46.22 21.01 194.00 88.2

4070445-72 72/1800 25.41 645 61.55 1562 29.61 752 81 2057 84.00 2132 11.71 297 48.27 21.94 201.00 91.4

4070445-78 78/1981 27.58 700 66.78 1693 31.14 790 87 2210 90.00 2285 11.71 297 53.77 24.44 217.00 98.6

4070445-84 84/2133 29.75 755 72.01 1828 33.55 851 93 2362 96.00 2437 12.61 320 56.5 25.68 225.00 102.0

4070445-96 96/2438 32.70 830 79.14 2009 35.64 905 105 2667 108.00 2742 12.61 320 63.71 28.96 253.00 115.0

4070445-102 102/2590 35.46 900 85.75 2178 37.59 954 111 2819 114.00 2894 12.61 320 65.17 29.62 257.00 117.0


RETURN BELT IDLER (STEEL) (for 7 inch/178mm dia. ROLL)




4072300-30 30/750 32.80 833 39.00 990 41.00 1040 71.44 32.47

4072300-36 36/900 38.70 983 45.00 1143 47.00 1194 80.42 36.55

4072300-42 42/1050 44.80 1138 51.00 1295 53.00 1345 90.45 41.11

4072300-48 48/1200 50.71 1288 57.00 1450 59.00 1499 100.42 45.6

4072300-54 54/1350 56.81 1443 63.00 1600 65.00 1650 110.44 50.2

4072300-60 60/1500 62.72 1593 69.00 1750 71.00 1805 120.42 54.74

4072300-66 66/1675 69 1746 75.00 1905 78.00 1980 128.95 58.61

4072300-72 72/1800 74.72 1898 81.00 2057 83.00 2108 133.93 60.88

4072300-78 78/1981 80.71 2050 87.00 2210 89.00 2261 143.22 65.1

4072300-84 84/2133 86.73 2203 93.00 2362 95.00 2413 151.75 68.98

4072300-96 96/2438 99 2508 105.00 2667 107.00 2718 160.28 72.85

4072300-102 102/2590 105 2661 109.00 2819 111.00 2870 168.81 76.73


FLAT STEEL CARRIER IDLER (STEEL) (for 7 inch/178mm dia. ROLL)




4074000-18 18/450 21.02 534 27.00 685 29.00 735 50.25 22.84

4074000-20 20/500 22.76 578 29.00 735 31.00 785 53.9 24.5

4074000-24 24/600 26.69 678 33.00 840 35.00 890 60.42 27.46

4074000-30 30/750 32.80 833 39.00 990 41.00 1040 71.44 32.47

4074000-36 36/900 38.70 983 45.00 1143 47.00 1194 80.42 36.55

4074000-42 42/1050 44.80 1138 51.00 1295 53.00 1345 90.45 41.11

4074000-48 48/1200 50.71 1288 57.00 1450 59.00 1499 100.42 45.6

4074000-54 54/1350 56.81 1443 63.00 1600 65.00 1650 110.44 50.2

4074000-60 60/1500 62.72 1593 69.00 1750 71.00 1805 120.42 54.74

4074000-66 66/1675 69.00 1746 75.00 1905 78.00 1980 129.13 58.70

4074000-72 72/1800 74.72 1898 81.00 2057 83.00 2108 133.93 60.88

4074000-78 78/1981 80.71 2050 87.00 2210 89.00 2261 143.22 65.1

4074000-84 84/2134 86.73 2203 93.00 2362 95.00 2413 151.75 68.98

Specialty Products

Specialty products available in most Series

Abrasion ResistanceMany of the bulk materials moved by conveyors can be very abrasive and/or corrosive. To help protect our idler rolls and frames against these elements we offer a range of options. Our rolls can be lagged with a variety of different rubbers, coated with a ceramic impregnated epoxy compound or sleeved with HDPE (High Density Polyethylene) or urethane. We offer the option of galvanized frames to aid in combating corrosion.

RubberWe have a variety of different rubber rolls to choose from to suit your conveyor system needs. Rubber can be used for abrasion resistance, belt cleaning or to lesson the stress on an idler. Non-castellated rubber rolls are used for wear resistance. Pure Gum rolls are a soft rubber roll used on the return side of the conveyor to clean the belt. Our castellated rolls are used for abrasion resistance as well as the prevention of material build up on rolls used on the return side of a conveyor. Rubber impact rolls are used in impact areas in order to lesson the stress on the conveyor belt as material is being dropped onto the belt. No matter what your rubber roll needs are, we can help you make the choice!

HDPEHDPE (High Density Polyethylene) covered rolls are used for abrasion & corrosion resistance.We utilize our standard steel roll with a 1/2” HDPE sleeve pressed onto it.

UrethaneUrethane rolls are also an excellent choice for abrasion resistance. We use our standard steel rolls with a 1/2” urethane sleeve pressed onto it.

CeramicCeramic rolls are used in very abrasive situations. Our Rite Idler ceramic rolls are made by taking our regular rolls and coating them with an epoxy which has ceramic embedded within it.

Galvanized Frames

Frames can experience corrosion due to the materials traveling on the conveyor belt, and even from the environment that the conveyor is in. Marine and salt water environments are a prime example of this. For this reason we offer the option of having any of our frames galvanized. We accomplish this using hot dipped galvanizing. For more severe applications, alternate coatings are available.

Choosing the abrasion resistant product to use on your conveyor system is a matter of personal preference. Rite Idler’s ceramic, HDPE and urethane rolls are all quality products designed to help reduce abrasion on your systems. Our galvanized frames are a great option for those working with corrosive material.

Retractable Idlers

In impact areas, or in heavily skirted areas of a conveyor system it is very difficult or even impossible to lift the belt in order to change the rolls. This leads to longer downtimes and greater frustrations when these rolls need to be changed.

The Retractable Idler is one of two options we offer to solve this problem. This product allows for the center roll and both wing rolls to be easily and quickly changed. One side slides out to give you access to one wing roll. The other side slides out to give you access to both the center and wing roll. This allows the rolls to get clear of the belt, making it easy to change ALL rolls.

Removable End Brackets

In impact areas, or in heavily skirted areas of a conveyor system it is very difficult or even impossible to lift the belt in order to change the rolls. This leads to longer downtimes and greater frustrations when these rolls need to be changed.

Our Removable End Bracket frames are our more economical solution to help solve this problem. This frame allows for easy removal of both wing rolls. All you need to do is undo the bolts on the end bracket and the top half of the bracket will lift out of the way. This will allow for the easy removal of the wing rolls. It is a much more economical solution than our retractable design for removing wing rolls, however it does not allow for the easy removal of the center roll.

Inverted "V" Tracking System

Conventional return training idlers can be a huge problem! The moving parts wear out, guide rolls fall off, debris gets lodged in the mechanisms and most people just end up roping them off to one side. Our Inverted “V” tracking system solves this problem!

The Inverted “V” Tracking System is a convenient and easy solution to your return tracking needs! Our Inverted “V” Returns are used in conjunction with regular return rolls on either side of it to make up the tracking system. The regular return rolls on either side are one CEMA rating higher than the rest of the system. The inverted V’s put pressure down directly on the belt, and then the next regular return roll ahead of it will track the belt straight. This system has NO moving parts! The only parts that move on this tracking system are the rolls spinning. All you do is set them up one time and let them run!

3 Roll Return Idlers

Rite Idler’s 3 roll return idler is the best and most effective return idler on the market! There are three major reasons why we can proudly make this claim. First, this design utilizes three shorter rolls as opposed to just one longer roll. This increases the number of bearings from two to six, doubling the carrying capacity of the idler, and decreasing the number of return idlers required on your system by half!

Second, the rolls used on the return are the same rolls used on the trough side of the belt, eliminating the need to stock extra spare rollers of another size! Not only will this simplify things and free up space, you will also be able to use less manpower due to the reduced weight of each roll!

Finally, the 3 roll return idler has the same ability to track your belt on the return side as a conventional return idler does, but it comes with two additional features! The belt is held in a trough on the return side rather than flat, so the forces that cause your belt to track off now have to battle gravity to try to push the belt up the incline of the return wing rolls. Our frames are designed so that both wing rolls tilt forward 2° in the direction of travel. This results in the belt being pushed to the centre of the idler and therefore towards the centre of the conveyor.

The 3 roll return idler is the choice for your return side of the belt. Not only is it the best and most effective product but it is also available in a special version which can solve material carry back on your belt. Placing the special version of our 3 roll return where the centre roll is lagged with pure gum rubber in strategic locations on the conveyor can effectively remove material that has accumulated without effecting the overall operation of the conveyor!

Already convinced this is the product for you or just looking to discuss your needs further? Contact any of our technical specialists for more information on how switching to 3 roll return idlers is the choice for you!

Guide Rolls

Guide rolls are designed to prevent belts from tracking off. They can be used on both the trough and return side of the conveyor belt. The problem with many guide rolls is the design itself. A conveyor belt can quickly wear down the steel of the guide roll and make it unusable.

Rite Idler’s guide rolls solve this problem because we have specifically designed ours to last longer. All of our guide rolls are custom-designed for specific applications and are machined out of solid steel billets. More steel means a longer life for our rolls. Our CNC capabilities allow our guide rolls to be custom-designed as required for different guiding requirements.

Extreme Duty Impact Idlers

When heavy duty is not enough, you have to go to the Extreme. Rite Idler’s “Extreme Duty” impact idlers are the perfect solution for tackling your toughest requirements. Pictured below is our 16” rubber tire impact idlers which can withstand the toughest impact conditions and are custom designed specifically for your application.

The end components of these idler rolls are precision machined in our CNC department. To achieve the durability required to stand up against the toughest loads, our 65 series incorporates 63132RS bearings.

With these products far surpassing CEMA F standards you can be assured that we are the choice for all your extreme duty needs!

Measuring Guides

Roll

Roll & Frame Measuring Guides and Tips

Measuring the Way Measuring rollers, frames can be tedious, difficult and confusing. Not only are these components often heavy, but if they are still on your conveyor system it can be very awkward to try and get any decent measurements. At Rite Idler, we understand this difficulty and have come up with handy reference guides to help you take the important and correct measurements the first time in order to ensure that the product is made for you.

The Tools for the Job Measuring tape. This is the most important tool you need. It’s not necessary to have to

use calipers or an overly precise measuring tool; a regular measuring tape which has millimeters and inches on it will work just fine.

Straight Edge. This can be anything from a piece of steel rod to a ruler. You will need two of them. It is used to help take precise measurements where the component itself gets in the way of taking the measurement properly. Plus it also makes taking the measurement much easier!

Helping Hand. If you have ever tried to measure a roll or idler on your own you know what were talking about. To be able to get accurate measurements easily you need more than two hands to do it. Grabbing a co-worker will make this job much easier.

Bonus Tools Angle Meter. This little devise is easy to use and will save you from taking two of the more difficult measurements. It is used to measure a frame or idler angle.

Helping Hand. Measuring large items by yourself is never easy, especially if the frame is still on the system. Grabbing a co-worker will make this job much easier.

Now that you have all the Rite tools for the job, grab one of our dimension sheets and a pen because we are ready to measure!

Measuring A Roller1. The first measurement you are going to take is the roll face. Take the measuring tape and measure

from the edge of one side of the can to the edge on the other side of the can. This is measurement “A” on our dimension sheets.

2. Next, measure from the inside of the slot (of one shaft end) to the other inside slot of the other shaft end. You are going to need a second set of hands and your straight edges. On one side take the straight edge against the inside slot of the roll. Hold one end of the tape measure against it. The second person is going to do the same thing on the other side. This makes it easy to read the distance between the inside of the slots. This measurement is “B” on our dimension sheets.

3. The third measurement is the total length of this roll. Use the straight edges against the end of each roll. Then you will measure in between each of your straight edges. This will give you the total length of your roll. This is measurement “C” on our dimension sheets.

4. The last measurement we need from the main structure of the roll is the roll diameter. This can be taken by measuring across the width of the roll at one end as close to the middle as possible. This is measurement “D” on our dimension sheets.

We are almost done! We need you to take a few shaft end measurements to ensure that your new roller will fit into your existing frame. Rite Idler has a variety of different shaft ends which we can screw in so we can give you the fit for virtually any frame!

1. First we need the shaft diameter. To measure this you are going to take your measuring tape and measure the shaft end. (If the end of your roll is hexagonal in shape; do not measure from the points! Measure the diameter of the flat edges.) This is measurement “F” on our dimension sheets.

2. The second measurement to take on the shaft end is also the most important measurement since it will determine if the roll will fit into the frame. This measurement is the distance from the flat surface on one side of the shaft to the flat surface on the other side of the shaft. This measurement is “G” on our dimension sheets. If the end is double-slotted (this is rare) you will need to also record the other distance between the flats. This will be measurement “H” on our dimension sheets.

3. The last thing we need to measure the width of the flats. This is the distance from the inside of the slot to the outside of the slot. This is measurement “E” on our dimension sheets.

Congratulations! You have now finished measuring your roller the way! Send us your completed dimension sheets and our dedicated sales team can get you exactly what you need!

Still not convinced that you can properly measure a roll? We will take the measurements for you! You can send us a sample of your roll or we can come visit you personally and take all of the proper measurements to ensure a custom fit!

Measuring a Frame1. The first and most important measurement you need to take when measuring a frame is the distance

between the bolt hole-centers across the stringers. Put one end of the measuring tape against the right edge of the slot in the stringer and measure it to the right edge of the hole in the stringer on the other side of the conveyor. This is measurement “A” on our dimension sheets.

2. The next measurement you will need to take is the distance between the center brackets. Measure from the inside of one center bracket to the inside of the other center bracket. This is measurement “B” on our dimension sheets.

If you know that this frame is for an equal length idler, proceed to step 4, if it is not or you are unsure continue on to step 3.

3. Measure the distance between the inside of the center bracket and the inside of the end bracket. This is measurement “C” on our dimension sheets.

Next we are going to determine the angle of the frame. This can only be directly measured by using an angle meter. If you have an angle meter proceed to step 6. Otherwise continue on to step 4.

4. Measure the distance between the inside of the tip of the end bracket to the inside tip of the other end bracket. This is measurement “E” on our dimension sheets.

5. Measure the distance between the tip of the end bracket to the bottom of the foot strap. It is important to make sure that you are measuring from the bottom of the foot strap. To make this measurement easier to take you can use a straight edge and lay it on the tip of the end bracket so that you can easily measure the distance. This is measurement “F” on our dimension sheet.

If you completed steps 4 & 5 proceed to step 7.

6. To use the angle meter on a frame you will need to use a straight edge and place on the center bracket and end bracket as shown in the picture below. Place the angle meter on the straight edge and it will give you the frame’s degree. This is measurement “D” on our dimension sheets.

7. Next you need to measure the slot width on the end bracket. Measure it from the inside edges. This is measurement “G” on our dimension sheets.

The last three measurements to be taken are on the foot strap.

8. Measure the distance between the inside edges of the slot [on the foot strap]. If it’s not on the structure; measure from the inside edge of one slot to the inside edge of the other slot. If it is on the structure; measure from the center of one bolt to the center of the other bolt. This is measurement “X” on our dimension sheets.

9. Next we need the length of the foot strap. Measure the distance between the outside edges of the foot strap. This is measurement “Y” on our dimension sheets.

10. The last measurement you need to take on the frame is the width of the slit in the foot strap. Measure the distance between the inside edges. This is measurement “Z” on our dimension sheets.

For your complete idler needs contact your local Rite Idler authorized distributor

Rite Idler 161 Brockley Drive

Hamilton, ON , Canada L8E 3C4 Tel: (905) 578-0332

Email: [email protected] www.riteidler.com

mailto:[email protected]://www.riteidler.com

complete cataloge title page - rite idler - cema conveyor ......our series 65 idlers meet cema f...

Documents