KISTNER GmbH & Co. KG www.maschinen-kistner.de info@maschinen-kistner.de

CNC coordinates portal measuring machine very maintained condition

Manufacture ZEISS

Type ECLIPSE 700 CNC 7/10/6 ST3/RDS-RST

Year of manufacture 2001

Control ZEISS – Software CALYPSO

Machine number 200103281292

Travels X - 700mm / Y - 1.000mm / Z - 580mm

TECHNICAL DATA

ZEISS CNC-Coordinate measuring device

ECLIPSE 700 CNC (ST3/RDS-RST)

measuring range X – 700mm / Y – 1.000mm / Z – 580mm

length measurement

length measurement uncertainty according to VDI/VDE 2617:

U1 = (2,4 + L/250) µm, U3 = (2,9 + L/250) µm, V2 = 2,2 µm

length measurement uncertainty accordint to ISO 10360-2:

E= (2,9 + L/250) µm, R3 = 3,3 µm

device characteristic

portal measuring device in ceramic technology

integrated vibration damping

microcomputer control

reference stylus

inclusive basic software package

acceptance document

operating manual

switching ZEISS probe ST3 for ECLIPSE

inclusive adapter, cable and 1 adapter plate

(smallest stylus tip diameter 1,5 mm)

determination measurement standard ball, DK = 25mm,

ceremics, max. form- and dimensional deviation: 0,0004

control panel standard

with two progressive joysticks and function keys

IP54 housing

data system

standard ZEISS PC data system

The computer fulfilled at least following hardware specification:

SCENIC eL-1183 with Intel Pentium III 733/133, 256 SLC

main storage SDRAM/133 (DIMM) 128MB

ISDN-interface card

graphic-contr. GM1000-32

CD-ROM drive 48x (IDE)

hard disk 20 GB (Ultra DMA/66)

fast ethernetlink XL 3C905C-TX WoL (3Com)

country accessories kit SCENIC 400 (D)

dual install NT/W2k & Word/Works German

second serial interface

keyboard KBPC P2 / D

1 pair of loudspeaker

17” Display

Printer

HP Laser Jet 1100

2 MB storage standard (max. up to 18 MB upgradable)

DIN A4

8 pages/per minute

7000 pages/per month

BW 600x600 dpi

HP PCL 5e

interface: Centronics parallel

inclusive Centronics cable, 2m

HP Colorado – internal tape 14 GB

for NT-systems

ethernet card

3COM 3C905B-Combo

fast etherlink XL PCI

10/100 Mbit RJ45, 10Mbit AUI, 10Mbit BNC

ethernet hub 8 x RJ45, 1 x AUI/BNC connection

inclusive 2 piece of RJ45 patch cable shielded, length 1 m

1 piece of RJ45 patch cable shielded, length 10 m

software

Software CALYPSO for CNC measurements

CC basis CALYPSO CNC geometry

fully graphical measurement- and evaluation software with

CAD-core for all prismatic measurements.

easily manageable through inspection plan orientated approach

strong graphic support with visualization of measuring task

and input value

few keystrokes and low error rate through automatic element recognition and

automatic travel way generation

measurement duration optimization through variable amount of inspection (FOCUS)

variable design of the presentation of results with easy integration of workpiece

specific graphics

multimedia support for the documentation of parts clamping and button arrangement

for the CNC-start

twisted-pair-cable

15m RJ45 1:1 Dop.

Gesch; K80 17.15

side table 800 mm x 800 mm

EQUIPMENT

stylus rack 3/280/800 ST

3 places; H=280 mm, L=600 mm

stylus rack – magazine place ST3/ST

adapter plate for ST3 (2pack)

button kit ST, small

(18 parted)