clean oil – always...purifiner – test of bio-oil before after purifiner ts5060pmh specification...
TRANSCRIPT
CLEAN OIL – ALWAYS
Purification of mineral and environmentally acceptable (EAL) oil systems
• Shipping
• Thrusters
• Stern-tube
• Cranes
• Winches
• RoRo equipment
www.atzmartec.com
Removing all water by evaporation
Today the use of EAL oil (Environmentally Acceptable Lubricant) requires
tight control of moisture content in thrusters, sterntubes or other systems
using biodegredable hydraulic oil (HEES).
It can be challenging to keep oil free of moisture. With purifiner’s oiltechnology we make it simple. All moisture is removed by evaporation, even from emulsified oil.
EAL oils break down in the
presence of water, hence
moisture content must be kept
to a minimum to prevent
damage to plant and machinery.
Oil suppliers recommend that
EAL oil should not have water
content exceeding 0.1%
(1000ppm)
The following analysis of particles, water content and
NAS class is provided by Norsk Oljelaboratorium AS.
After four hours of cleaning, the oil has a
superior NAS grade compared to new oil,
and the reduction in water is 99.3%
Furthermore, the reduction in particles
above 5 micron compared to before
processing is 80.2%.
After added water After four hours of cleaning
Number of particles above
5 micron Water in ppm Water in % NAS grade
New oil 11.410 254 0.0254 6
After added water 18.847 25.000 2.5 7
After 2 hours of cleaning 16.573 1.800 0.18 6
After 4 hours of cleaning 3.723 158 0.0158 4
Purifiner – test of bio-oil
BeforeAfter
PURIFINER TS5060PMH SPECIFICATIONCapacity: 600 litres/24 hourOil amount: Up to 3,000 litres (flow in the system / tank to be cleaned)Oil type: All hydraulic- and lubricating oilsViscosity: 32 - 320 (cSt.)Max pressure in: 200 bar (with reduction valve) 3 bar as standardMax Back-pressure: 8 barFilter use: Approx. 4 filters a year with continual use and
in normal circumstancesPower consumption: 2,400 watt, 230 volt, 16 amp circuitConnection: 3/8” BSP external threadWarranty: 24 monthsWeight: 45 kgDimensions: 64 x 45 x 47 cm (H x W x D)
Why choose purifiner?• Clean cotton filter + evaporation of water
• Continuous oil maintenance provides the highest standard of oil
• Most reliable technology on the market
• The lowest operating cost for a filter system on the market
• Provides significant cost savings on oil and future breakdowns
• Small outlay with good return on investment
• Extends oil life by a factor of 10 to 15 times
• Highest oil standard = less mechanical failures and downtime
PRESSURISED SYSTEMS
PRESSURISED SYSTEMS
Our patented filter removes particles down to 1-3 micron and evaporates water
in the specially designed chamber.
Heating element
Patentedevaporationchamber
Pure cotton filter
Clean oilreturn
Evaporation valve
Nozzle
Regulated flow 40 l/hr(Contaminated oil)
Knutsen OAS Shipping AS
www.atzmartec.com
References:
AtZ Marine Technologies LtdUnit 11, Compass Point, Ensign Way,Hamble, Southampton,Hampshire, SO31 4RATel: +44 (0)2380 455447Email: [email protected]
Many mechanical failures find their root cause in contaminated oil. Maintaining
oil quality by removing water and particulates results in fewer mechanical failures
and reduced downtime. It reduces operating costs, consumption and enhances
equipment life. Combined, the significant benefits of maintaining oil quality will
make your business greener.
We have delivered more than 3000 units to shipping customers worldwide
– with the best results.
We make oil greener
ww
w.b
k.no
04.
2018