circular saw bench gama 80 v - avola
TRANSCRIPT
CIRCULAR SAWS
Gama 80 V – DUO-infeed / outfeed devices
AVOLACircular Saw Bench GAMA 80 VRevolving cross cut / rip cut saw
Technical Equipmentl Motor rating 22 kW / 400 Vac-50 Hz star delta start gear drivel Motor speed rpm 3.000 / sawblade speed
rpm 2.200l Cutting height 90° / 310 mm – 45° / 217 mm – 30° / 149 mml Electrical sawblade inclination 90 – 30° l Revolving table 0-270°l Machine table with lateral movement 650 mml Automatic vertical pneumatic clamping cylinders right / leftl Laser light for cross cuttingl TCT-sawblade, 800 x 30 x T90 l Dust extraction spigots 160 / 160 / 80 / 80 mml Sawblade height adjustment via mechanical stop system, with measuring
scale, easy to adjustl DUO infeed / outfeed devices
AVOLA MASCHINENFABRIKA. Volkenborn GmbH & Co. KG
Heiskampstraße 11D-45527 HattingenPostfach 80 02 28D-45502 HattingenTelefon +49 / 23 24 - 96 36-0Telefax +49 / 23 24 - 96 36-50E-mail [email protected]
GAMA Circular Saw BenchesThe modular system for your individual wood working needs
Technical datas Unit GAMA 80 V
Motor output (S6 - 40%) kW 22
Drive gear
Motor speed 1/m 3000
Sawblade speed 1/m 2200
Peripheral speed of saw m/s 90
TCT – sawblade mm 800/30 T = 96
Cutting height 90/45/30° ca. mm 310/217/149
Table dimensions m 1,5x1,5x0,9
Sawblade inclination ° 90-30
Revolving table, angle ° 0-270
Ø Dia. Dust extraction spigots mm 160/160/80/80
Vacuum at dust extraction spigots pa 1750
Sound power level against DIN EN ISO 3746 run at no load – run at load dB (A) 102,0/106,0
Emission sound pressure against prEN ISO 11202 in connection with CEN TC 142 run at no load – run at load
dB (A) 87,0/91,0
GAMA 80 V
DUO – Infeed / outfeed devicesMaterial infeed and outfeed with infinitely variable speed Setting via potentiometer
(v = 0,5 – 25 m/min), Geared feed motor P2 = 0,75 kW / Feed power F = 1000 N
Extansion for DUO infeed / out-feed devices (option)Drive rollers are standing up to the machine table, even short pieces of timber from the outfeed area can be pulled out easily
Sawblade height adjustmentvia mechanical stop system, with measuring scale, easy to adjust.
Electrical sawblade inclination90 – 30°
Aluminium back fence connection, pneumatic
Laser light for cross cutting
DUO-Infeed / outfeed devices – Outfeed device with extansion Machine hood
DUO-Infeed / outfeed devices – Infeed device with extansion
pneumatic clamping cylinders left/right
horizontal clamping cylinder, right
Two-hand cross cutting system
Electrical sawblade inclination, digital readout
Sawblade height adjustment
Roller infeed - outfeed table
Roller infeed - outfeed table
AVOLA Circular Saw Bench GAMA 80 V
horizontal clamping cylinder, left