chemicalfumes and extraction system model ......chemicalfumes and extraction system model...

Chemical Fumes Laser Dust and Extraction System Model LCFE1704

Main Fume Extraction

ControlUnit

A ldjustable ength Gooseneckhigh temperature Fume Hosesupplied with 1.5 meter length.Customized more length ofsame available as per requiredpositioning.

• 1xMain Extraction unit

Extraction Arm• 1x (75mm dia, 1. meter long)5

Hood Square Metallic (180x180mm)• 1xSpeed Control Regulator• 1x

• 5 Spare Pre-Filtersx

Scope of Supply

Speed Control Regulator

On/Off witchS

Speed Control

Increase speed

Decrease speed

• Input Power SupplyNo of Workplaces • Stationary Pressure • • Maximum Airflow RateFiltering Efficiency (0.3um)• Noise Level• Dimension (LxWxH) (approx)•

: 230V/50Hz, 250W: 1: 3000 Pa: 25 m /h0 3

: 99.97%: <65dB: 470 x 230 x 350mm

Specifications

reliable & caring since 1976

AirflowSettingSwitches

Speed ControlRegulator Connector

powerful urbineT supplied with all accessoriesmaintenance-free Brushless ●

System Choke Alarm:When display shows

circular movement clockwise plus OFF

and system beeps,it means Filtersany of

needs replacement.

Digital Display Indicator

Air Flow Controlling Knob to control the Air FlowVarious types of Chemical Fumes Extraction possibilities

Metallic Square 180x180 m mAir Purifier Fume Hood has

A Fmechanical ir low Controller

Mechanical Air Flow

Controller

Air Flow Controller positionfully open

Air Flow Controller positionfully closed

While the information contained herein in, has been carefully compiled to the best of our knowledge, nothing is intended as representation and warranty on our part; and no statement shall be construed as recommendation to infringe any of existing patents. We accept no liability of whatsoever for any faults and errors in the information contained herein. Contents of this catalogue and specifications of the products, are subject to change without notice due to continuous improvements.

shown trademarks are property of their respective owners.

Warranty is 12 months from the date of invoice. It excludes all consumable parts as Filters, Extraction Arms and Hoods

Website: www.indeonline.in Landline: 0172-4614415 Email: [email protected] Phones: 8283820745 & 9316134502

Features


1. Normally Pre-Filter need periodic replacement when there is less suction of fumes.low cost s

2. hese Filters should be washed nor should be cleaned with compressed air .None of t at all

Details of -Stage Filters used in this Extraction System4 Chemical & Laser Dust Fumes

● Metal Framed Main Filter: This Metal Framed Filter,Stage IV besides absorbing very fine particles thru its HEPA Filter, also absorbs obnoxious chemical fumes because of its Charcoal & Alkalined based other stages.

● Pre-Filter: The Pre-Filter filters the bigger size particles Stage I for prolonging the life of both Middle and Main Filters.

● Metal Framed Middle Filter: It filters coarse size fume Stage II particles to prolong life of expensive Metal Framed Main Filter.

Stage I ● Pre-Filter: This Pre-Filter prolongs life of expensive II Metal Framed Main Filter so as to minimize its replacement.

Stage IV Metal Framed

, Charcoal &HEPAAlkaline combined

Main Filter

Stage I Pre-Filter

Stage IIMetal FramedMiddle Filter

Stage I IIPre-Filter

• Hassle-free easy-to-start operation with all inclusive kit supplied

• Easy-to-manoeuver positioning of Fume Extraction Arm

• Reliable & virtually maintenance-free Brushless DC Turbine

• Has low noise (< 65 dBA) in continuous running operation

• Special Main Filter with its last stage of Alkaline type, makes sure to remove obnoxious harmful chemical fumes

• Low running cost as normally low cost Pre-Filter mainlyneed replacement periodically as and when there is choking of fumes extraction.

• Middle Filter and Main Filter are in Metal Frames

• Ready availability of all spare parts from stock

Length of the Extraction Arm is easily adjustable,as this is made from press-fit type small sections which easily adjustable in length by selectionare

per length.of these sections as required

This is hi-end volume extraction type and ready-to-use Chemical Fume & Laser Dust Extraction System. It is designed for continuous working reliably on main production line. It has very powerful and maintenance-free Brushless Turbine and Electronic Speed Control Unit. Its metal framed special Middle Filter and Main Filterprovide clean working environment. The electronic Speed Controller regulates air-flow volume.

Ready-to-use Chemical Fume and Laser Dust

Extraction System Model LCFE1704 is fitted with

4-stage Filters: Pre-Filter, Metal Framed

Middle Filter, another Pre-Filter, Metal Framed

special Main Filter with last alkaline stage.

Combination of all these Filters cleans chemically

polluted air by absorbing these obnoxious fumes.

This System is designed for use both in industrial

and in laboratory environment. All it needs is merely

mains input Power Supply.

Pre-FilterP/N:PF-LCFE1704

Pre-FilterP/N:PF-LCFE1704

Metal FramedHEPA, Charcoal & Alkaline Main FilterP/N:CMF-LCFE1704

Metal FramedMiddle FilterP/N:MF-LCFE1704

Chemical Fumes Laser Dust and Extraction System Model LCFE1704

powerful urbineT supplied with all accessoriesmaintenance-free Brushless ●






2-Operators Solder Fumes Extraction System FES2-75ESDLCpowerful

Couple of 100's (in repeat orders) working reliably all over India for the last many years

Main Extraction Control Unit

Rigid Gooseneck Arms can be positioned anywhere on table and will stay in same place

No Plumbing requiredust position onj or

under the Table as needed

Metallic type Square Hoods

• 1xESD Safe Black Colour Main unit

ESD Safe Extraction Arms• 2x ( mm dia, 5 meter long)75 1.

Hoods• 2xMetallic Square Speed Control Regulator• 1x

pare Pre-FiltersS• 2x

Scope of Supply• Input Power Supply

No of Workplaces • Stationary Pressure •

• Maximum Airflow RateFiltering Efficiency (0.3um)• Noise Level• Dimension (LxWxH) (approx)•

: 230V/50Hz, W250: 2: 00 Pa30: m /h240 3

: 99.97%: <6 dB0: 470x230x500mm

Specifications

Ready-to-useCompletePackage

Caster wheels for easy mobility


On/Off switch

Speed Control

Increase speed

Decrease speed




Solder fumes extraction during hand soldering on PCB & Solder Pot tinning




needs replacement.






Stage III HEPA Filter

Stage I Pre-Filter

Unique Pre-CutMetal Plate

2- perators ready-to-use Solder oFumes Extraction System Model

is fitted with FES2-75ESD3-stage Filters: Pre-Filter, Middle Filter and HEPA Filter. /CharcoalCombination of these Filters cleans polluted air by separating 99.9% contaminated solder fumes. This System is designed for use both in industrial and laboratory environment. All it needs is

ains nput Power Supply only.m i

Stage IIMiddle Filter

Details of 3-Stage Filters used in this Fume Extraction System

1. Normally Pre-Filter only needs periodic replacement when there is less suction of fumes.

2. hese 3 Filters should never be washed nor should be cleaned with compressed air at all.T


Pre-FilterP/N:PF-PRO201

Metal Plate

Middle FilterP/N:MF-PRO201

Main Filter HEPA/CharcoalP/N:HF-PRO201

● Pre-Filter: The Pre-Filter filters the bigger size Stage I particles for prolonging the life of both Middle and Main Filters.

● Metal Plate: Metal Plate on top to increase the life of Filters

● Middle Filter: It filters coarse size fume particles Stage II to prolong life of expensive HEPA/Charcoal Filter

Features



• Hassle free easy-to-start operation with all inclusive kit- supplied

• Easy-to-manoeuver Extraction Armspositioning of Fumes


• Has low noise (< 60 dBA) in operation continuous running

• Filters design removes hazardous gaseous/adhesive substances from fumes.


• Readily availability of all spare parts from stock

FES2-75ESD reliable and really effective o is a volume extraction type 2- perators ready-to-use Solder Fume Extraction System. It is designed for continuous and reliable working on production line. Its powerful and maintenance-free brushless turbine combined with electronic speed control, provides clean working environment at low maintenance cost. The electronic Speed Controller regulates air-flow volume continuously.

● Main HEPA Filter:/Charcoal This Filter is a Stage III combination of HEPA (filters fine size fume particles) and A C ( )ctivated harcoal absorbs harmful gas substances Filters to provide clean air finally.

2-Operators Solder Fumes Extraction System FES2-75ESDLCpowerful






2-Operators Solder Fumes Extraction System FES2-75ESDTCpowerful


Main Extraction Control Unit


No extra Plumbing required

j connect ust supplied hoses thru Table Clamps

Metallic type Square Hoods

• 1xESD Safe Black Colour Main unit

ESD Safe Extraction Arms • 2x ( mm dia, 0.8 meter long)75 • 2xBench Clamps

2xSoft Connection Hose • 2xMetallic Square • Hoods

Speed Control Regulator• 1xpare Pre-FiltersS• 2x

Scope of Supply

• Input Power SupplyNo of Workplaces • Stationary Pressure •


: 230V/50Hz, W250: 2: 00 Pa30: m /h240 3

: 99.97%: <6 dB0: 470x230x500mm

Specifications


Caster wheels for easy mobility


On/Off switch

Speed Control

Increase speed

Decrease speed








needs replacement.







Stage I Pre-Filter



is fitted with FES2-75ESD3-stage Filters: Pre-Filter, Middle Filter and HEPA Filter. /CharcoalCombination of these Filters cleans polluted air by separating 99.9% contaminated solder fumes. This System is designed for use both in industrial and laboratory environment. All it needs is








Metal Plate






Features












2-Operators Solder Fumes Extraction System FES2-75ESDTCpowerful






2-Operators Solder Fumes Extraction System FES2-50ESDpowerful

over 1000 units (in repeat orders) working reliably all over India for the last many years

• 1xESD Safe Black Colour Main unitESD Safe Extraction Arms• 2x

(50mm dia, 1.2 meter long) ESD Safe Round Hoods• 2xSpeed Control Regulator• 1x


Scope of Supply includes all offollowing to make it ready-to-use

• Input Power SupplyNo of Workplaces • Stationary Pressure •


: 230V/50Hz, W250: 2: 00 Pa30: m /h240 3

: 99.97%: <6 dB0: 470x230x500mm

Specifications


On/Off switch

Speed Control

Increase speed

Decrease speed








needs replacement.

Burn-proof Round Hoods

Casterwheels

foreasy

mobility

2 Lockablewheels




Rigid Gooseneck Arms can be

positioned anywhere on

table and will stay in same place







Stage I Pre-Filter


Uniquely designed top Metal Plate toextend life of all 3-Filters


is fitted withFES2-50ESD topmetal plate and 3-stage Filters:Pre-Filter, Middle Filter and

/Charcoal HEPA Filter. Combinationof these Filters cleans polluted air byseparating 99.9% contaminated solderfumes. This System is designed for useboth in industrial and laboratory environment.

m iAll it needs is ains nput Power Supply only.


Details of 3-Stage Filters used in this Fume Extraction Systemtop Metal Plate and




Metal Plate






Features










2-Operators Solder Fumes Extraction System FES2-50ESDpowerful

over 1000 units (in repeat orders) working reliably all over India for the last many years






2-Operators Solder Fumes Extraction System FumePRO201-75LCpowerful


FumePRO 201Main

ExtractionControl

Unit




Burn-proof Metallic type Square Hoods(180x180mm)

• 1xFumePro201 Main Extraction unit

Extraction Arms• 2x ( mm dia, meter long)75 1.2

Metallic Square Hoods (180x180mm)• 2xSpeed Control Regulator• 1x


Scope of Supply• Input Power Supply

No of Workplaces • Stationary Pressure •


: 230V/50Hz, W250: 2: 00 Pa30: m /h240 3

: 99.97%: <6 dB0: 470x230x500mm

Specifications



On/Off switch

Speed Control

Increase speed

Decrease speed








needs replacement.







Stage I Pre-Filter

2- perators ready-to-use Solder oFumes Extraction System Model FumePRO201-75 is fitted with LC3-stage Filters: Pre-Filter, Middle Filter and HEPA Filter. /CharcoalCombination of these Filters cleans polluted air by separating 99.9% contaminated solder fumes. This System is designed for use both in industrial and laboratory environment. All it needs is






2-Operators Solder Fumes Extraction System FumePRO201-75LCpowerful







Features










FumePRO201-75 is a volume extraction type 2- perators ready-to-use Solder LC reliable and really effective oFume Extraction System. It is designed for continuous and reliable working on production line. Its powerful and maintenance-free brushless turbine combined with electronic speed control, provides clean working environment at low maintenance cost. The electronic Speed Controller regulates air-flow volume continuously.






HEPA (High-efficient filter paper: Material - fiberglass) Filter

Middle ilter (Middle filter paper: Material - fiberglass)F

Pre-Filter (Filter Material - polypropylene)

Item

1

2

3

4

5

6

7

Refers to Q/320000BXS16-2006Efficiency and resistance tested by sodium flame

Test results

White and even

0.33

75.8

1.33

0.724

99.97 (0.3um)

196

1.55

Test

Appearance

Thickness: mm

Gram weight: g/m 2

Strength: KN/m

Efficiency:0.321/min.c m 2

Resistance:0.321/min.c m 2

Stiffness: Mn.m

Specification

White and even

0.32-0.34

/

≥1.2 (Portrait)

≥0.5 (Lateral)

≥98 (0.3um)

≤220

≥1.2

Item

1

2

3

4

5

6

7

Refers to Q/320000BXS16-2006Efficiency and resistance tested by sodium flame

Test results

White and even

0.34

69.7

1.44

0.733

66.67

36

1.75

Test

Appearance

Thickness: mm

Gram weight: g/m 2

Strength: KN/m

Efficiency:0.321/min.c m 2

Resistance:0.321/min.c m 2

Stiffness: Mn.m

Specification

White and even

0.32-0.34

/

≥1.2 (Portrait)

≥0.5 (Lateral)

≥60

30-40

≥1.2

Item

1 350 5-6 1 323 78 110

Gram persquare meter:

g/m2

Dustcapacity:

g/m2

Free statethickness:

mm

Filterspeed:

m/s

Initialresistance:

Pa

Artificialdust

efficiency:%

Specifications/Test Report of Filters used in FES2 & FumePRO201-Series






chemicalfumes and extraction system model ......chemicalfumes and extraction system model...

Documents