chapter 1 introduction to the programmable logic controllers
DESCRIPTION
Chapter 1 Introduction to the Programmable Logic Controllers. 1.1 Introduction. Of all the devices that are used to control manufacturing operations, the Programmable Logic Controller (PLC) is one of the most important. 1.1 .1 Generation of PLC. - PowerPoint PPT PresentationTRANSCRIPT
2
1.1 Introduction
Of all the devices that are used to control manufacturing operations,
the Programmable Logic Controller (PLC) is one of the most important.
3
1.1 .1 Generation of PLC
The first PLC were introduced in the early 1960s, mainly by the automobile industry.
Up until then the automatic control of manufacturing equipment was achieved by using hundreds , and even thousands , of relays enclosed in metal cabinets.
4
1.1 .1 Generation of PLC
A lot of time, and errors often occurred when making connections.
For these reasons, control engineers developed a computerized programmable system to replace the relay racks.
The annual automobile-model changes required frequent modifications to the production lines and their associated relay-control systems.
5
1.1 .1 Generation of PLC
Because the control systems were complex, the modifications took a lot of time, and errors often occurred when making connections.
For These reasons, control engineers developed a computerized programmable system to replace the relay racks.
6
1.1 .1 Generation of PLC
Because the control systems were complex, the modifications took a lot of time, and errors often occurred when making connections.
For These reasons, control engineers developed a computerized programmable system to replace the relay racks.
7
1.1 .1 Generation of PLC
Computers that had previously been used to do accounting jobs were modified to respond to the needs of industry .
Little by little, the techniques were improved and more users of the new technology were found. however, a full decade went by before the new concept was systematically adopted by manufacturers.
8
In the beginning, PLC were mainly used to replace hard-wired physical relays.
This offered many advantages because the PLC took up less space than conventional relay cabinets and consumed much less energy.
1.1.2 Capacity of Industrial PLCs
9
In the beginning, PLC were mainly used to replace hard-wired physical relays.
This offered many advantages because the PLC took up less space than conventional relay cabinets and consumed much less energy.
they were programmable and equipped with LED indicators that made it easy to check the operation of the control system and to diagnose problems
1.1.2 Capacity of Industrial PLC
10
In the beginning, PLC were mainly used to replace hard-wired physical relays.
This offered many advantages because the PLC took up less space than conventional relay cabinets and consumed much less energy.
1.1.2 Capacity of Industrial PLC
11
Today, thanks to the evolution in electronics and computer technology, the performance of PLC is impressive.
While they are still used to replace relays, PLCs can now perform mathematical operations and control and regulate industrial processes.
1.1.2 Capacity of Industrial PLC
12
1.1.2 Capacity of Industrial PLCs
For instance, they can regulate temperature, pressure, flow rates, motor drives, and so forth.
PLCs can now communicate with each other as well as with a central computer. The latter can collect data, change the operating parameters, and even modify the PLC programming.
13
1.1.3 Elements of a Control System A central processing unit (CPU)
Which is a computer that can simulate the required relay contact and relay coils, as well as the connections between them.
An input modulewhich serves as an interface between the actual control devices and the CPU.
14
1.1.3 Elements of a Control System An output module, which serves as an
interface between the CPU and the actual device that are being controlled.
A programming unit consisting of a keyboard and monitor to program the CPU. It enables us to select different types of “relays” and “contacts” that the computer can simulate, as well as the way the are to be connected.
15
1.1.3 Elements of a Control System
A power supply that furnishes the power needed by the CPU, by the input/output (I/O).
Modules, and by the programming unit.
16
1.2 Functions and Characteristics
Stepping Sequence Control:
Motor Control Center
Machine Tool Electrical Control
Protection for power supply system
Boiler Safety Protection system
17
1.2 Functions and Characteristics
Timing Control
One equipment acts following another’s equipment’s action after certain timing control.
Timer Relay.
18
1.2 Functions and Characteristics
Conditioning Control
All the Other equipment are not allowed to act during certain equipment’s action.
19
1.2 Functions and Characteristics
Counting Control
The next action can begin only after attaining given counting number for a certain action.
20
1.2 Functions and Characteristics
A/D and D/A transformation A/D: Analog signal to Digital signal; Input to Computer.
D/A: Digital signal to Analog signal; Output analog signal to site equipment.
21
1.2 Functions and Characteristics
Data Transaction
Further transaction for the site data according to the requirements of computer.
22
1.2 Functions and Characteristics
Communication and Network 1) Remote Control;
2) PC Link between the same or different types of computers.
3) Host Link to Host Computer.
23
1.2 Functions and Characteristics
Spare Control
More than one computers have the control function in order to improve the reliabilities of the control system.
24
1.2 Functions and Characteristics
Monitoring and Control Function
Controls are used to the most important function.
Monitoring is used to identify, remember or interlock certain parameters.
25
1.2 Functions and Characteristics
Other Functions
1) Indication;
2) Printing;
3) Alarming;
4) Data and programs copying
26
1.3 PLC Selection Criteria
PC or PLC?Number of I/O (memory also)Type of I/OFunctions (PID, Recipes, Data Storage)Programming LanguageRedundancySafetyStandardizationPrice (Hardware and Complements)Reputation
27
1.3 PLC Initial System Selection
40% extra space
Fixed vs. Variable
DC vs. AC
Local vs. Multipoint
Special Function
Operator Interface
Documentation
70% input 30% output
28
Advantages of DC vs. AC
Smaller Wires
Less Insulation
Smaller Conduit
Smaller Switches
Safety
Smaller Connectors
29
1.4 PLC Classification by I/O
Nano 8-32 MicroLogix
Micro 32-250 CompactLogix
Small 250-4k ControlLogix
Medium 2k-16k Momentum (Mod)
Large 8k-32k Quantum (Mod)
Very Large >32kPLC-5