chaperon brochure - intl - vidriera online...microvention terumo | guiding catheter system bundled...
TRANSCRIPT
Mic
roVe
ntio
n Te
rum
o | G
uidi
ng C
athe
ter S
yste
m
Bundled and ready-to-use, Chaperon’s inner catheter is designed exclusively for the guiding catheter. It’s the only integrated system of its kind available.
Braid-Reinforced Proximal Shaft – 102cm Hydrophilic Coating – 15cm
Distal Flexible Length – 7cm
CHAPERON GUIDING CATHETER
Size iDCatheterLength
Distal Flex.Length
5F 0.059” (1.50mm) 95cm 7cm
6F 0.071” (1.80mm) 95cm 7cm
CHAPERON INNER CATHETER
Size iDCatheterLength
Distal Flex. Length
HydrophilicCoating Length
Max. injection Pressure
4F 0.041” (1.03mm) 117cm 7cm 15cm 750psi
5F 0.048” (1.22mm) 117cm 7cm 15cm 1000psi
5F Guiding Catheter comes with 4F Inner Catheter 6F Guiding Catheter comes with 5F Inner Catheter
GUIDING CATHETER
INNER CATHETER
Inner Catheter ShapesGuiding Catheter Shapes
JB2VTR SIM2STR MP1 MP2 BUR
Inner Catheter ShapesGuiding Catheter Shapes
JB2VTR SIM2STR MP2 BUR
MicroVention, Inc.Worldwide Headquarters Suite 3, The Barracks Building
10 Cliffords Fort, North ShieldsTyne and Wear, NE30 1JE UKPH +44 (0) 191 258 6777F +44 (0) 191 258 5999
30 bis, rue du Vieil Abreuvoir78100 Saint-Germain-en-LayeFrancePH +33 (1) 39 21 77 46F +33 (1) 39 21 16 01
1311 Valencia Ave. Tustin, CA 92780 USAPH +1.714.247.8000PH 1.800.990.8368
MicroVention UK Limited MicroVention Europe, S.A.R.L. Berliner Allee 61D-40212 DusseldorfGermanyPH +49 211 210 798-0F +49 211 210 798-29
MicroVention Deutschland GmbH
MICROVENTION and Chaperon are registered trademarks of MicroVention, Inc. • Scientific and clinical data related to this document are on file at MicroVention, Inc. Refer to Instructions for Use for additional information. © 2012 MicroVention, Inc. MM146(I) Rev.C 09/12
microvention.com
Integrated Catheter System with Greater Support and Lumen Area
I
NN
ER C
ATHE
TER
guId
INg
CATH
ETER
Mic
roVe
ntio
n Te
rum
o | g
uidi
ng C
athe
ter S
yste
m
fEATuRINg A lARgE luMEN wITH A uNIquE INNER CATHETER foR RApId ATRAuMATIC ACCESS
largest Id
Maximum Control & Maneuverability
guIdINg CATHETER fEATuRES
ID5F - 0.059” 6F - 0.071”
• Thin PTFE layer and flat wire braid creates increased lumen diameter
• 5F - 0.059” 6F - 0.071”
• Allows for multiple catheter usage (6F)
• Increased kink resistance
• Greater torque transmission and superior maneuverability
Soft Inner Catheter with Hydrophilic Coating
Finally, a guiding catheter that is available as a completely
integrated system. The only guiding catheter system
bundled with an inner catheter designed exclusively as
a single ready-to-use unit. No other guiding catheter
can match its large inner diameter design.
opTIMAl SHApE CoNfIguRATIoNSThe co-axial system with multiple tip configurations optimizes shape with vessel anatomy, improving placement and stability. Because the inner catheter provides you with appropriate curve selections for advancement of the system, you can select a more suitable curve on the guiding catheter.
Improved Vessel Access Safety
• INNER CATHETER provides gradual transition from guidewire to large- lumen guiding catheter
• loCkINg SySTEM combines the two catheters for easy advancement
• loNgER RAdIopACITy for safe distal positioning
fEATuRINg A lARgE luMEN wITH A uNIquE INNER CATHETER foR RApId ATRAuMATIC ACCESS
INNER CATHETER INTEgRATEd SySTEM wITH loCkINg MECHANISM
INNER CATHETER fEATuRES
Inner Catheter
Guiding Catheter
0.035” Guidewire
Guiding Catheter
• Increased trackability
• Sustained lubricity
• Facilitates atraumatic navigation in small, distal vasculature
• Allows smooth advancement of guiding catheter over inner catheter
• Soft, conformable tip contains no braiding in distal 15cm
• Radiopacity for precise placement
• Several tip configurations available
• Can be used for diagnostic treatments
• 4F - 750 PSI 5F - 1,000 PSI
Locking System