ch.1 – wans and routers
DESCRIPTION
Ch.1 – WANs and Routers. CCNA 2 version 3.0 Rick Graziani Cabrillo College. Overview. Students completing this module should be able to: Identify organizations responsible for WAN standards Explain the difference between a WAN and LAN and the type of addresses each uses - PowerPoint PPT PresentationTRANSCRIPT
Ch.1 – WANs and Routers
CCNA 2 version 3.0
Rick Graziani
Cabrillo College
Rick Graziani [email protected] 2
Overview
Students completing this module should be able to:
• Identify organizations responsible for WAN standards
• Explain the difference between a WAN and LAN and the type of addresses each uses
• Describe the role of a router in a WAN
• Identify internal components of the router and describe their functions
• Describe the physical characteristics of the router
• Identify common ports on a router
• Properly connect Ethernet, serial WAN, and console ports
Rick Graziani [email protected] 3
Introduction to WANs
These are the major characteristics of WANs: • They connect devices that are separated by wide geographical areas. • They use the services of carriers such as the Regional Bell Operating
Companies (RBOCs), Sprint, MCI, VPM Internet Services, Inc., and Altantes.net.
• They use serial connections of various types to access bandwidth over large geographic areas.
Rick Graziani [email protected] 4
Introduction to WANs
• Routers offer many services, including internetworking and WAN interface ports. • Switches in the WAN provide connectivity for voice, data, and video
communication. • Modems include interface voice-grade services, channel service units/digital
service units (CSU/DSUs) that interface T1/E1 services, and Terminal Adapters/Network Termination 1 (TA/NT1s) that interface Integrated Services Digital Network (ISDN) services.
• Communication servers concentrate dial-in and dial-out user communication.
Rick Graziani [email protected] 5
Introduction to WANs
Rick Graziani [email protected] 6
Introduction to routers in a WAN
Routers connect and allow communication between two networks and determine the best path for data to travel through the connected networks.
RAM
• Stores routing tables
• Holds ARP cache
• Holds fast-switching cache
• Performs packet buffering (shared RAM)
• Maintains packet-hold queues
• Provides temporary memory for the configuration file of the router while the router is powered on
• Loses content when router is powered down or restarted
NVRAM
• Provides storage for the startup configuration file
• Retains content when router is powered down or restarted
Rick Graziani [email protected] 7
Introduction to routers in a WAN
Flash memory• Holds the operating system image (IOS) • Allows software to be updated without removing
and replacing chips on the processor • Retains content when router is powered down or
restarted • Can store multiple versions of IOS software • Is a type of electronically erasable,
programmable ROM (EEPROM) Read-only memory (ROM) has the following
characteristics and functions: • Maintains instructions for power-on self test
(POST) diagnostics • Stores bootstrap program and basic operating
system software • Requires replacing pluggable chips on the
motherboard for software upgrades
Interfaces • Connect router to network for
frame entry and exit • Can be on the motherboard
or on a separate module
Rick Graziani [email protected] 8
Router LANs and WANs
• Smaller broadcast domains
• Connecting Layer 3 networks
Rick Graziani [email protected] 9
Router LANs and WANs
• Routers are the backbone devices of large intranets and of the Internet.
• They operate at Layer 3 of the OSI model, making decisions based on network addresses.
• The two main functions of a router are the selection of best path for and the switching of frames to the proper interface.
• Routers accomplish this by building routing tables and exchanging network information with other routers.
Rick Graziani [email protected] 10
Router role in a WAN
• The WAN physical layer describes the interface between the data terminal equipment (DTE) and the data circuit-terminating equipment (DCE).
• Generally, the DCE is the service provider and the DTE is the attached device. In this model, the services offered to the DTE are made available through a modem or a CSU/DSU.
Rick Graziani [email protected] 11
Router role in a WAN
• The primary WAN roles of a router are therefore not routing, but providing connections to and between the various WAN physical and data-link standards.
• For example, a router may have an ISDN interface using PPP encapsulation and a serial interface terminating a T1 line using Frame Relay encapsulation.
Rick Graziani [email protected] 12
Academy approach to hands-on labs
• In the academy lab, devices that make up the WAN cloud are simulated by the connection between the back-to-back DTE-DCE cables.
• One of the routers will provide the clock rate (later).
Rick Graziani [email protected] 13
Router internal components
• CPU • RAM • Flash • NVRAM
• Buses • ROM • Interfaces • Power Supply
Rick Graziani [email protected] 14
Router physical characteristics
Rick Graziani [email protected] 15
Router external connections
Rick Graziani [email protected] 16
Management port connections
Rick Graziani [email protected] 17
Management port connections
Rick Graziani [email protected] 18
Connecting console interfaces
When connected using the console interface, the computer is acting as a “dumb terminal”.
<Router Output>
Rick Graziani [email protected] 19
Connecting console interfaces
Rick Graziani [email protected] 21
Connecting LAN interfaces
Rick Graziani [email protected] 22
Connecting WAN interfaces
Rick Graziani [email protected] 23
Connecting WAN interfaces
Rick Graziani [email protected] 24
Connecting WAN interfaces
Rick Graziani [email protected] 25
Summary
An understanding of the following key points should have been achieved:
• WAN and LAN concepts
• Role of a router in WANs and LANs
• WAN protocols
• Configuring encapsulation
• The identification and description of the internal components of a router
• The physical characteristics of a router
• The common ports on a router
• How to connect router console, LAN, and WAN ports