1 © 2004, cisco systems, inc. all rights reserved. ccna 2 v3.1 module 1 wans and routers
TRANSCRIPT
1© 2004, Cisco Systems, Inc. All rights reserved.
CCNA 2 v3.1 Module 1 WANs and Routers
222© 2004, Cisco Systems, Inc. All rights reserved.
Purpose of This PowerPoint
• This PowerPoint primarily consists of the Target Indicators (TIs) of this module in CCNA version 3.1.
• It was created to give instructors a PowerPoint to take and modify as their own.
• This PowerPoint is:
NOT a study guide for the module final assessment.
NOT a study guide for the CCNA certification exam.
• Please report any mistakes you find in this PowerPoint by using the Academy Connection Help link.
333© 2004, Cisco Systems, Inc. All rights reserved.
To Locate Instructional Resource Materials on Academy Connection:
• Go to the Community FTP Center to locate materials created by the instructor community
• Go to the Tools section
• Go to the Alpha Preview section
• Go to the Community link under Resources
• See the resources available on the Class home page for classes you are offering
• Search http://www.cisco.com
• Contact your parent academy!
444© 2004, Cisco Systems, Inc. All rights reserved.
Objectives
555© 2004, Cisco Systems, Inc. All rights reserved.
Introduction to WANs
• A WAN is a data communications network that spans a large geographic area such as a state, province, or country.
666© 2004, Cisco Systems, Inc. All rights reserved.
WAN Devices
777© 2004, Cisco Systems, Inc. All rights reserved.
WAN Services
888© 2004, Cisco Systems, Inc. All rights reserved.
Data Link Encapsulations
999© 2004, Cisco Systems, Inc. All rights reserved.
Internal Configuration Components
101010© 2004, Cisco Systems, Inc. All rights reserved.
Routers Connected by WAN Technologies
111111© 2004, Cisco Systems, Inc. All rights reserved.
Path Determination
121212© 2004, Cisco Systems, Inc. All rights reserved.
Internetwork Routers
• Any internetwork must include the following:
Consistent end-to-end addressing
Addresses that represent network topologies
Best path selection
Dynamic or static routing
Switching
131313© 2004, Cisco Systems, Inc. All rights reserved.
Academy Approach to Labs
• In the academy lab, all the networks will be connected with serial or Ethernet cables and the students can see and physically touch all the equipment.
• Devices that make up the WAN cloud are simulated by the connection between the back-to-back DTE-DCE cables.
141414© 2004, Cisco Systems, Inc. All rights reserved.
Router Internal Components
151515© 2004, Cisco Systems, Inc. All rights reserved.
Router Internal Components
161616© 2004, Cisco Systems, Inc. All rights reserved.
Internal Components of a 2600 Router
171717© 2004, Cisco Systems, Inc. All rights reserved.
External Connections on a 2600 Router
181818© 2004, Cisco Systems, Inc. All rights reserved.
Router External Connections
191919© 2004, Cisco Systems, Inc. All rights reserved.
Computer or Terminal Console Connection
202020© 2004, Cisco Systems, Inc. All rights reserved.
Modem Connection to Console or Auxiliary Port
212121© 2004, Cisco Systems, Inc. All rights reserved.
Console Port Connections
1. Configure terminal emulation software on the PC for the following:
The appropriate com port
9600 baud
8 data bits
No parity
1 stop bit
No flow control
2. Connect a rollover cable to the router console port (RJ-45 connector).
3. Connect the other end of the rollover cable to the RJ-45 to DB-9 adapter
4. Attach the female DB-9 adapter to a PC.
222222© 2004, Cisco Systems, Inc. All rights reserved.
Eight-Pin Connections for Cisco 2600 Series Routers
232323© 2004, Cisco Systems, Inc. All rights reserved.
WAN Types
242424© 2004, Cisco Systems, Inc. All rights reserved.
Router Serial WAN Connectors
252525© 2004, Cisco Systems, Inc. All rights reserved.
DCE Serial Connections
262626© 2004, Cisco Systems, Inc. All rights reserved.
Summary