Cecil Henderson603 N.Mesa 

Carlsbad, New Mexico, 88220575-361-0595

cecilhenderson@windstream.net  W O R K E X P E R I E N C EL&E SERVICES, Carlsbad, NMTruck Pusher / Sales Rep., Aug 2016 – Present

 East Plant Surface Maintenance Supervisor, Oct 2011 – Aug 2016

Enforce safety rules and regulations.Plan work assignments and equipment allocations to meet Maintenance, operations or production goals.Confer with customers, supervisors, contractors, or other personnel to exchange information or to resolve problems.Direct workers in transportation or related services, such as pumping, moving, storing, or loading or unloading of materials or people.Resolve worker problems or collaborate with employees to assist in problem resolution.Review orders, production schedules, blueprints, or shipping or receiving notices to determine work sequences and material shipping dates, types, volumes, or destinations.Monitor field work to ensure that it is being performed properly and that materials are being used as they should be.Maintain or verify records of time, materials, expenditures, or crew activities.Explain and demonstrate work tasks to new workers or assign training tasks to experienced workers.Prepare, compile, and submit reports on work activities, operations, production, or work-related accidents.Recommend or implement personnel actions, such as employee selection, evaluation, rewards, or disciplinary actions.Requisition needed personnel, supplies, equipment, parts, or repair services.Inspect or test Materials, vehicles, equipment, or facilities to ensure that they are safe, free of defects, and consistent with specifications.Dispatch personnel and vehicles in response to telephone or radio reports of emergencies.Perform or schedule repairs or preventive maintenance of vehicles or other equipment.Interpret safety regulations, or company policies and procedures for workers.Drive vehicles or operate machines or equipment to complete work assignments or to assist workers.

 North Plant Maintenance Planner and O&M Coordinator, Aug 2007 – Oct 2011

Reassemble machines after the completion of repair or maintenance work.Start machines and observe mechanical operation to determine efficiency and to detect problems.Inspect or test damaged machine parts, and mark defective areas or advise supervisors of repair needs.Lubricate or apply other materials to machines, machine parts, or other equipment, according to specified procedures.

603 N.Mesa     Carlsbad, New Mexico, 88220    575-361-0595    cecilhenderson@windstream.net

 

Install, replace, or change machine parts and attachments, according to production specifications.Dismantle machines and remove parts for repair, using hand tools, chain falls, jacks, cranes, or hoists.Record production, repair, and machine maintenance information.Read work orders and specifications to determine machines and equipment requiring repair or maintenance.Set up and operate machines, and adjust controls to regulate operations.Collaborate with other workers to repair or move machines, machine parts, or equipment.Inventory and requisition machine parts, equipment, and other supplies so that stock can be maintained and replenished.Transport machine parts, tools, equipment, and other material between work areas and storage, using cranes, hoists, or dollies.Collect and discard worn machine parts and other refuse in order to maintain machinery and work areas.Clean machines and machine parts, using cleaning solvents, cloths, air guns, hoses, vacuums, or other equipment.Replace or repair metal, wood, or other lining in machines, or in equipment compartments.Remove hardened material from machines or machine parts, using abrasives, power and hand tools, jackhammers, sledgehammers, or other equipment.Measure, mix, prepare, and test chemical solutions used to clean or repair machinery and equipment.Replace, empty, or replenish machine and equipment containers such as gas tanks or boxes.

 Mobile Equipment shop, Feb 2005 – Aug 2007

Repair and replace damaged or worn parts.Dismantle and reassemble heavy equipment using hoists and hand tools.Operate and inspect machines or heavy equipment to diagnose defects.Test mechanical products and equipment after repair or assembly to ensure proper performance and compliance with manufacturers' specifications.Clean, lubricate, and perform other routine maintenance work on equipment and vehicles.Read and understand operating manuals, blueprints, and technical drawings.Overhaul and test machines or equipment to ensure operating efficiency.Fit bearings to adjust, repair, or overhaul mobile mechanical, hydraulic, and pneumatic equipment.Diagnose faults or malfunctions to determine required repairs, using engine diagnostic equipment such as computerized test equipment and calibration devices.Examine parts for damage or excessive wear, using micrometers and gauges.Repair, rewire, and troubleshoot electrical systems.Schedule maintenance for industrial machines and equipment, and keep equipment service records.Research, order, and maintain parts inventory for services and repairs.Clean parts by spraying them with grease solvent or immersing them in tanks of solvent.Weld or solder broken parts and structural members, using electric or gas welders and soldering tools.Adjust and maintain industrial machinery, using control and regulating devices.Assemble gear systems, and align frames and gears.

603 N.Mesa     Carlsbad, New Mexico, 88220    575-361-0595    cecilhenderson@windstream.net

 

Fabricate needed parts or items from sheet metal.Direct workers who are assembling or disassembling equipment or cleaning parts.

 Shift Mehanic, Oct 2002 – Aug 2005

Disassemble machinery or equipment to remove parts and make repairs.Repair or replace broken or malfunctioning components of machinery or equipment.Repair or maintain the operating condition of industrial production or processing machinery or equipment.Examine parts for defects, such as breakage or excessive wear.Reassemble equipment after completion of inspections, testing, or repairs.Observe and test the operation of machinery or equipment to diagnose malfunctions, using voltmeters or other testing devices.Operate newly repaired machinery or equipment to verify the adequacy of repairs.Clean, lubricate, or adjust parts, equipment, or machinery.Analyze test results, machine error messages, or information obtained from operators to diagnose equipment problems.Record repairs and maintenance performed.Study blueprints or manufacturers' manuals to determine correct installation or operation of machinery.Record parts or materials used and order or requisition new parts or materials as necessary.Cut and weld metal to repair broken metal parts, fabricate new parts, or assemble new equipment.Demonstrate equipment functions and features to machine operators.

 E D U C A T I O NCarlsbad Senior High School, Carlsbad, NMHigh School Diploma, Apr 1984

Education & TrainingNew Mexico State university at CarlsbadIntroduction to Engineering Technology, Industrial Processes, Applied DC Circuits, Applied DC circuit Lab, Digital Logic, Applied A/C Circuits, Applied A/C Circuit Lab, Introduction to InstrumentationCivic Organizations / HonorsNew Mexico State university at Carlsbad, Deans List, National Deans List (Spring 1999) with a 4.0 GPA

 A D D I T I O N A L S K I L L S

Over 27 years of industrial MaintenanceExperienced in leading a crew or Crews in repairing equipmentExperienced in prioritizing work loads and meeting dead linesExperienced in Supervision, Foreman, Lead man, Planning and SchedulingSelf-Motivated, highly dependable, Punctual, efficient team worker/ leaderCommitted to high performance and quality standardsWorked with Maintenance Computer programs such as emesa, Ellipse and MincomAble to use Microsoft Excel, Word and power pointExperienced in reading- Blue prints and wiring schematicsExperienced in repairing heavy equipmentExperienced in running heavy equipmentExperienced working within budget and time restraintsExperienced in inventory and purchasing

   

603 N.Mesa     Carlsbad, New Mexico, 88220    575-361-0595    cecilhenderson@windstream.net