category - advertising standards (4) page price
TRANSCRIPT
CATEGORY - ADVERTISING STANDARDS (4) PAGE PRICE
1. GYS 65-1: 2006 CCS….: 2006
Requirements for advertising - Part 1: General. 19 5,500
2. GYS 65 – 2: 1997 Requirements for advertising – Part 2: Advertising to children. 5 4,000
3. GYS 65 – 3: 1997 Requirements for advertising – Part 3: Advertising of cigarettes. 14 5,000
4. GYS 198: 2001 (BETS 3, Issue 2, December, 1997)
Television broadcasting. 26 6,600
CATEGORY - AGRICULTURE STANDARDS (28) PAGE PRICE
1. GYS 1: 2004 (First Revision)
Specification for limes.
8 4,000
2. GYS 2: 2010 CRS 24: Part 7: 2010/2nd Revision
Specification for grades of fresh agricultural produce – Part 7: Pineapple.
8 4,000
3. GYS 3: 2010 CRS 24: Part 8: 2010/1st Revision
Specification for grades of fresh agricultural produce – Part 8: Pumpkins
6 4,000
4. GYS 4: 1994 Specification for grades of watermelon. 4 3,300
5. GYS 5: 1994 Specification for grades of cucumber. 3 3,300
6. GYS 6: 1994 Specification for grades of fresh ginger. 3
7. GYS 7: 2010 CRS 24: Part 4: 2010/ 1st Revision
Specification for grades of fresh agricultural produce – Part 4: Hot peppers.
6 4,000
8. GYS 8: 2010 CRS 24: Part 2: 2010/1st Revision
Specification for grades of fresh agricultural produce – Part 2: Cabbages.
6 4,000
9. GYS 9-18: 2005 Specification for labelling of commodities – Part 18: Labelling of seeds.
6 4,000
10. GYS 24: 1995 Specification for grades of green plantain. 3 3,300
11. GYS 25: 1995 Specification for grades of sweet orange. 3 3,300
12. GYS 26: 2010 CRS 24: Part 5: 2010/2nd Revision
Specification for grades of fresh agricultural produce – Part 5: Mangoes.
7 4,000
13. GYS 27: 2010 CRS 24: Part 3: 2010
Specification for grades of fresh agricultural produce – Part 3: Grapefruits.
9 4,400
14. GYS 59: 1996 Specification for carambola. 7 4,000
15. GYS 60: 1996 Specification for grades of sweet potatoes. 4 3,300
16. GYS 61: 1996 Specification for grades of eddo. 4 3,300
17. GYS 62: 1996 Specification for grades of boulanger (Eggplant). 4 3,300
18. GYS 63: 1996 Specification for grades of avocado. 4 3,300
19. GYS 64: 1996 Specification for grades of passion fruit. 4 3,300
20. GYS 73: 1997 Specification for grades of cowpea. 5 4,000
21. GYS 74 : 2010 CRS 24: Part 1: 2010/ 1st Revision
Specification for grades of fresh agricultural produce – Part 1: Bananas
8 4,000
22. GYS 75: 1997 Specification for grades of cassava. 7 4,000
23. GYS 76: 2010 CRS 24: Part 9: 2010
Specification for grades of fresh agricultural produce – Part 9: Sweet peppers
6 4,000
24. GYS 136:2010 CRS 24: Part 10: 2010
Specification for grades of fresh agricultural produce – Part 10: Tomatoes
9 4,400
25. GYS 233: 2003 Specification for urea fertilizer grade. 21 6,100
26. GCP 21: 2005 Code of Practice for fresh fruits and vegetables. 21 6,100
27. GCP 25:2007
Code of Practice for packaging and transport of tropical fresh fruits and vegetables.
12 4,400
28 GYS 517: 2017 ISO 7409: 1984
Fertilizer – Making – Presentation and declarations 2 3,300
CATEGORY - CHEMICAL STANDARDS (6) PAGE PRICE
1. GYS 9-13: 2003
Specification for labelling of commodities – Part 13: Labelling of household chemicals.
8 4,000
2. GYS 9-14: 2003
Specification for labelling of commodities – Part 14: Labelling of hazardous industrial chemicals.
23 6,100
3. GYS 85: 2003
Specification for classification of hazardous chemicals and
chemical products.
71 11,300
4. GYS 213: 2002 Specification for liquid household chlorine bleaches. 9 4,400
5. GYS 221: 2003
Glossary of terms relating to chemical and radiation hazards and hazardous chemicals.
19 5,500
6. GYS 510: 2013 CRS 37: 2011
Specification for labelling of retail packages of aerosol insecticides. 9 4,400
CATEGORY – CONFORMITY ASSESSMENT STANDARDS (13)
1. GYS 170: 2009
(2nd Revision)
General requirements for the operation of a laboratory. 30 6,600
2. GYS 223: 2018 ISO/IEC 17025: 2017/2nd Rev.
General requirements for the competence of testing and calibration laboratories.
28 6,600
3. GYS 275: 2013 ISO/IEC 17020: 2012/1st Revision
Conformity assessment – Requirements for the operation of various types of bodies performing inspection.
18
5,500
4. GYS 276: 2013 ISO/IEC 7065: 2013
Conformity assessment – Requirements for bodies certifying products, process and services.
27 6,600
5. GYS 454: 2009 ISO/IEC 17021: 2006
Conformity assessment – Requirements for bodies providing audit and certification of management systems.
26 6,600
6. GYS 457: 2009
ISO Guide 31: 2000
Reference materials – Contents of certificates and labels. 7 4,000
7. GYS 466: 2009
ISO 17011: 2005
Conformity assessment – General requirements for accreditation bodies accrediting conformity assessment bodies.
21 6,100
8. GYS 467: 2009 ISO 17007: 2009
Conformity assessment – Guidance for drafting normative documents suitable for use for conformity assessment.
13 5,000
9. GYS 472: 2009
ISO/IEC Guide 60: 2004 Conformity assessment – Code of good practice. 5 4,000
10. GYS 473: 2009
ISO/IEC Guide 68: 2002 Arrangements for the recognition and acceptance of conformity assessment results.
8 4,000
11. GYS 474: 2009 ISO/IEC 17000: 2004
Conformity assessment – Vocabulary and general principles. 47 9,000
12. GYS 490: 2009
ISO Guide 67: 2004
Conformity assessment – Fundamentals of product certification.
9 4,400
13. GYS 500: 2013 ISO/IEC 17043: 2010
Conformity assessment – General requirements for proficiency
testing.
39 7,700
CATEGORY - CONSTRUCTION STANSDARDS (19) PAGE PRICE
1. GYS 168: 1996 ISO 10137: 1992
Bases for design of structures – Serviceability of buildings against vibration.
32 7,200
2. GYS 195: 2001 ASTM C 14-88
Specification for concrete sewer, storm drain and culvert pipe. 10 4,400
3. GYS 200: 2001 Specification for hollow clay blocks. 9 4,400
4. GYS 214: 2009 First revision
Specification for steel nails. 28 7,200
5. GYS 215: 2003 Reapproved 2018
Specification for load bearing masonry concrete units. 16 5,000
6. GYS 216: 2002 Reapproved
Specification for non-load bearing masonry concrete units. 5 4,000
7. GYS 227: 2003 Specification for ready mixed concrete. 11 4,400
8. GYS 269: 2010 Specification for galvanized steel barbed wire. 5 4,000
9. GYS 324: 2010 Specification for hot-dip coated corrugated steel sheets for general purposes.
12 4,000
10. GYS 458: 2009 Specification for chain link fence fabric. 6 4,000
11. GCP 9-1:2005 Building Code – Part 1: Enforcement. 24 5,000
12. GCP 9-3: 2005 First Revision
Building Code – Part 3: Fire, safety, use and occupancy. 17,400
13. GCP 9-5: 1999 Building Code – Part 5: Plumbing. 82 12,100
14. GCP 9-7: 1999
Building Code – Part 7: Use of Guyanese hardwoods in construction.
36 7,000
15. GCP 9-8: 1999 Building Code – Part 8: Concrete and block masonry. 41 7,700
16. GCP 9-9: 1999 Building Code – Part 9: Structural steel. 19 5,500
17. GCP 9-11: 2003 Building Code – Part 11: High rise buildings. 63 10,600
18. GCP 9-13: 2005 Building Code – Part 13: Foundations and excavations. 19 5,500
19. GYS 527:2018
Requirements for the design and construction of tanks and secondary treatment and disposal septic associate systems
26 6,600
CATEGORY – CONSUMER PRODUCTS STANDARDS (6) PAGE PRICE
1. GYS 28: 2006 CCS 0045: 1999 Revision, 2005
Specification for safety matches.
14 5,000
2. GYS 169: 1998 Specification for the content of warranties for goods. 7 4,000
3. GYS 171: 1998 Specification for toothbrushes. 11 4,400
4. GYS 212: 2009 First Revision
Specification for net content in packages. 12 4,400
5. GYS 230: 2003 Specification for the handling of consumer complaints. 14
6. GYS 557: 2020 Plastic bathtub and shower units.
IAPMO/ANSI
Z 124.1.2: 2005
Plastic bathtub and shower units.
CATEGORY – CONTRACEPTIVE DEVICES STANDARDS (2) PAGE PRICE
1. GYS 40-1: 1996 ISO 7857 - 1: 1983
Intra-uterine devices – Part 1: Determination of breaking force. 1 3,300
2. GYS 40-3: 1996 ISO 7857-3: 1983
Intra-uterine devices – Part 3: Packaging and labelling.
2 3,300
CATEGORY - COOKING APPLIANCES (1) PAGE PRICE
1. GYS 193: 2017 First Revision
Specification for domestic gas stoves for use with liquefied petroleum gases.
36 7,700
CATEGORY - COSMETICS AND BABY PRODUCTS STANDARDS (12) PAGE PRICE
1. GYS 9 – 8: 1998
Specification for labelling of commodities – Part 8: Labelling of cosmetics.
17 5,500
2. GYS 11 – 1: 1995 Specification for cosmetics – Part 1: General Requirements. 7 4,000
3. GYS 11 – 2 : 1997
Specification for cosmetics – Part 2: Water used in the preparation of cosmetics.
10 4,400
4. GYS 11 – 3: 1997. Specification for cosmetics – Part 3: Raw materials and adjuncts
22 6,100
5. GYS 11 – 4: 1997 Specification for cosmetics – Part 4: Microbiological test methods.
41 8,300
6. GYS 11 – 5: 1997 Specification for cosmetics – Part 5: Skin lotions and creams. 9 4,000
7. GYS 11 – 6: 1997 Specification for cosmetics – Part 6: Specification for shampoo.
15 5,000
8. GYS 11 – 7: 2002
Specification for cosmetics – Part 7: Methods of test for the efficacy of antimicrobial preservatives in water-based cosmetics.
7 4,000
9. GYS 179 – 1: 1998 Baby skin care products – Part 1: General Requirements. 6 4,000
10. GYS 179 – 2 : 998 Baby skin care products – Part 2: Baby powder. 13 5,000
11. GYS 495: 2010 CRS 16: 2010
Specification for botanical cosmetics. 18 5,500
12. GCP 6 : 1997 Code of Practice for persons carrying out the business of beautifying and improving the skin, hair or nails.
4 3,300
CATEGORY - ELECTRICAL EQUIPMENT STANDARDS (211) PAGE PRICE
1. GYS 9 – 7: 2005 First revision
Specification for labelling of commodities – Part 7: Labelling of electrical equipment, fittings and household electrical appliances.
5 4,000
2. GYS 182 – 1: 1999
Specification for safety of household and similar electrical appliances – Part 1: General requirements.
76 12,100
3. GYS 186: 1999 UL 507: 1994
Electric fans.
18,700
4. GYS 187: 1999 UL 982: 1985
Motor – operated household food preparing machines.
110 15,200
5. GYS 188: 1999 UL 250: 1993
Household refrigerators and freezers.
102 14,100
6. GYS 190 : 1999
Specification for electrical plugs and receptacles rated at 250 volts and less, 15 amperes and less.
6,100
7. GYS 196: 2001 UL 1410 : 1989
Television receivers and high voltage video products.
128 16,300
8. GYS 199 : 2001 BETS 4, Issue 1, November 01, 1996
Technical standards and requirements for television broadcasting transmitters.
44 8,300
9. GYS 201: 2001 ANSI/UL 510: 1986
Insulating tape.
12 4,400
10. GYS 202 : 2001 BS 6346: 1989
Specification for PVC – insulated cables for electricity supply.
36 7,700
11. GYS 204: 2001 ANSI/UL 1570: 1982
Fluorescent lighting fixtures.
76 12,100
12. GYS 205: 2001 BESP 100, Issue 1, November 01, 1996
Certification of broadcasting equipment.
21 6,100
13. GYS 217: 2003 ANSI/UL 935: 1992
Fluorescent – Lamp ballasts. 66 10,600
14 GYS 218: 2003 ANSI/UL 1778: 1991
Uninterruptable power supply equipment. 139 16,300
15. GYS 232: 2017 UL 588: 2015/1st Rev
Safety for seasonal and holiday decorative products. 202 20,000
16. GYS 236: 2003 Specification for transmitters and receivers in VHF maritime mobile service bands.
23 6,100
17. GYS 255: 2003 Specification for radio apparatus: VHF and UHF fixed and land mobile service.
20 5,500
18. GYS 257: 2004 Specification for electrical appliance protectors. 4 3,300
19. GYS 270: 2006 BS 6004: 2000
Electric cables – PVC insulated, non-armoured cables for voltages up to and including 450/750V, for electric power, lighting and internal wiring.
42
8,300
20. GYS CISPR 13: 2006 Edition 4.2
Sound and television broadcast receivers and associated equipment – Radio disturbance characteristics – Limits and methods of measurement.
83 12,100
21. GYS CISPR 16-1-1: 2006/2nd Edition
Specification for radio disturbance and immunity measuring apparatus and methods – Part 1: Radio disturbance and immunity measuring apparatus.
139
16,300
22. GYS CISPR 16-1-2: 2004/ Edition 1.1
Specification for radio disturbance and immunity measuring apparatus and methods – Part 1-2: Radio disturbance and immunity measuring apparatus - Ancillary equipment – Conducted disturbances.
141
16,300
23. GYS CISPR 16-1-3: 2004/ 2nd Edition
Specification for radio disturbance and immunity measuring apparatus and methods – Part 1-3: Radio disturbance and immunity measuring apparatus Ancillary equipment – Disturbance power.
63
10,600
24. GYS CISPR 16-1-4: 2004/A 2: 2005 Edition 1.1
Specification for radio disturbance and immunity measuring apparatus and methods – Part 1-4: Radio disturbance and immunity measuring apparatus – Ancillary equipment – Radiated disturbances.
147
11
17,400
4,400
25. GYS CISPR 16-1-5: 2003
Specification for radio disturbance and immunity measuring apparatus and methods – Part 1-5: Radio disturbance and immunity measuring apparatus - Antenna calibration test sites for 30 MHz to 1000 MHz.
103
14,100
26. GYS CISPR 16-2-1: 2005 Edition 1.1
Specification for radio disturbance and immunity measuring apparatus and methods- Part 2-1: Methods of measurement of disturbances and immunity – Conducted disturbance measurements.
137
16,300
27. GYS CISPR 16-2-2: 2005 Edition 1.2
Specification for radio disturbance and immunity measuring apparatus and methods – Part 2-2: Methods of measurement of disturbances and immunity – Measurement of disturbance power.
89
13,100
28. GYS CISPR 16-2-3: 2003/A 1 + A2: 2003
Specification for radio disturbance and immunity measuring apparatus and methods – Part 2-3: Methods of measurement of disturbances and immunity – Radiated disturbance measurements.
133
17,11
16,300; 5,500; 4,400
29. GYS CISPR 16-2-4: 2003
Specification for radio disturbance and immunity measuring apparatus and methods – Part 2-4: Methods of measurement of disturbances and immunity – Immunity measurements.
49
9,000
30. GYS CISPR 16-/TR: 2003/A 1: 2005 2nd Edition
Specification for radio disturbance and immunity measuring apparatus and methods – Part 3: CISPR technical reports.
192;
21
18,700
6,100
31. GYS CISPR 16-4-1/ TR: 2004 Edition 1.1
Specification for radio disturbance and immunity measuring apparatus and methods – Part 4-1: Uncertainties, statistics and limit modeling – Uncertainties in standardised EMS tests.
82
12,100
32. GYS CISPR 16-4-2: 2003
Specification for radio disturbance and immunity measuring apparatus and methods – Part 4-2: Uncertainties, statistics and limit modeling – Uncertainty in EMS measurements.
43
8,300
33. GYS CISPR 16-4-3/ TR:2 004
Specification for radio disturbance and immunity measuring apparatus and methods – Part 4-3: Uncertainties, statistics and limit modeling – Statistical considerations in the determination of EMC compliance of mass–produced products.
31
7,200
34. GYS CISPR 16-4-4/ TR: 2003
Specification for radio disturbance and immunity measuring apparatus and methods – Part 4-4: Uncertainties, statistics and limit modeling – Statistics of complaints and a model for the calculation of limits.
39
7,700
35. GYS CISPR 20: 2005 Edition 5.2
Sound and television broadcast receivers and associated equipment – Immunity characteristics Limits and methods of measurement.
171 18,700
36. GYS CEI/IEC 60050 (723): 1997/A 1: 1999
International Electrotechnical Vocabulary – Chapter 723: Broadcasting: Sound, television, data.
231 78
21,500 12,100
37. GYS CEI/IEC 60065: 2005/ Edition 7.1
Audio, video and similar electronic apparatus – Safety requirements.
339 25,400
38. GYS CEI/IEC 60076-1: 2000/Edition 2.1
Power Transformers – Part 1: General.
89 13,100
39. GYS CEI/IEC 60076-2: 1993/2nd Edition
Power Transformers – Part 2: Temperature rise. 57 9,800
40. GYS CEI/IEC 60076-3: 2000
Power transformers – Part 3: Insulation levels, dielectric tests and external clearances in air.
107 15,200
41. GYS CEI/IEC 60076-4: 2002
Power Transformers – Part 4: Guide to the lightning impulse and switching impulse testing – Power transformers and reactors.
123 15,200
42. GYS CEI/IEC 60076-5: 2006 3rd Edition
Power Transformers – Part 5: Ability to withstand short circuit.
71 11,300
43. GYS CEI IEC 60076-7: 2005
Power Transformers – Part 7: Loading guide for oil immersed power transformers.
113 15,200
44. GYS CEI/ IEC 60076-8: 1997
Power Transformers – Part 8: Application guide.
167 18,700
45. GYS CEI/IEC 60076-10: 2001
Power Transformers – Part 10: Determination of sound levels.
69 11,300
46. GYS CEI/IEC 60076- 10-1: 2005
Power Transformers – Part 10-1: Determination of sound levels – Application guide.
95 14,100
47. GYS CEI/IEC 60076-11: 2004
Power Transformers – Part 11: Dry – type transformers. 75 12,100
48. GYS CEI/IEC 60076-13: 2006
Power Transformers – Part 13: Self - protected liquid filled transformers.
35 7,200
49. GYS CEI/IEC/TS 60076-14: 2004
Power Transformers – Part 14: Design and application of liquid – immersed power transformers using high – temperature insulation materials.
75 12,100
50. GYS CEI/IEC 60094-1: 1981/+A1: 1994/ 4th Edition
Magnetic tape sound recording and reproducing systems – Part 1: General conditions and requirements.
43 8,300
51. GYS CEI/ IEC 60107-2:1997 2nd Edition
Methods of measurement on receivers for television broadcast transmissions – Part 2: Audio channels General methods and methods for monophonic channels.
51
9,000
52. GYS CEI/IEC 60107-3:1999 Edition 1.1
Recommended methods of measurement on receivers for television broadcast transmissions – Part 3: Electrical measurements on multichannel sound television receivers using subcarrier systems.
53
9,800
53. GYS CEI/IEC 60107-7: 1997
Methods of measurement on receivers for television – Part 7: HDTV displays.
129 16,300
54. GYS CEI/IEC 60107-8: 1997
Recommended methods of measurement on receivers for television broadcast transmissions – Part 8: Measurements on D2-MAC/packet equipment.
97
14,100
55. GYS CEI/IEC 60151-28:1 978
Measurements of the electrical properties of electronic tubes – Part 28: Methods of measurement of colour- television picture tubes
19
6,100
56. GYS CEI/IEC 60197: 1965
High – voltage connecting wire with flame retarding insulation for use in television receivers.
15 5,000
57. GYS CEI IEC 60244-5: 1992/ 2nd Edition
Methods of measurement for radio transmitters – Part 5: Performance characteristics of television transmitters.
168
18,700
58. GYS CEI IEC 60244-8: 1993 2nd Edition
Methods of measurement for radio transmitters – Part 8: Performance characteristics of vestigial - sideband demodulators used for testing television transmitters and transposers.
49
9,000
59. GYS CEI IEC 60244-10: 1986
Methods of measurement for radio transmitters – Part 10: Methods of measurement for television transmitters and transposers employing insertion test signals.
81
12,100
60. GYS CEI IEC 60246: 1967
Connecting wires having a rated voltage of 20 kV and k V d.c. and maximum 25 working temperature of 105 0C for use in television receivers.
11
5,500
61. GYS CEI IEC 60227-4: 1997 Edition 2.1
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750V – Part 4: Sheathed cables for fixed wiring.
15
5,000
62. GYS CEI IEC 60309- 1: 2005/Edition 4.1
Plugs, socket – outlets and couplers for industrial purposes Part 1: General requirements.
183
18,700
63. GYS CEI IEC 60309-2: 2005 Edition 4.1
Plugs, socket – outlets and couplers for industrial purposes - Part 2: Dimensional interchangeability requirements for pin and contact – tube accessories.
101
14,100
64. GYS IEC 60311: 2006 Edition 4.1
Electric irons for household or similar use – Method for measuring performance.
49 9,000
65. GYS CEI IEC 60315-1: 1988 2nd Edition
Methods of measurement on radio receivers for various classes of emission – Part 1 : General considerations and methods of measurement, including audio – frequency measurements
86
13,100
66. GYS CEI/IEC 60335-1: 2004/+ A 2: 2006/Edition 4.1
Household and similar electrical appliances – Safety – Part 1: General requirements.
281;43 22,800
8,300
67. GYS CEI IEC 60335- 2-3: 2005/ Edition 5.1
Household and similar electrical appliances – Safety – Part 2-3: Particular requirements for electric irons.
35 7,200
68. GYS CEI IEC 60335-2-9: 2006 Edition 5.1
Household and similar electrical appliances – Safety – Part 2-9: Particular requirements for grills, toasters and similar portable cooking appliances.
65 10,600
69. GYS CEI IEC 60335-2-69: 2005/ Edition 3.1
Household and similar electrical appliances – Safety Part 2-69: Particular requirements for wet and dry cleaners, including power brush, for industrial and vacuum commercial use.
117
15,200
70. GYS CEI IEC 60335- 2-80: 2002 + A 1: 2004 Edition 2.1
Household and similar electrical appliances – Safety – Part 2-80: Particular requirements for fans.
23
6,100
71. GYS CEI IEC 60335-2-97: 2005/Edition 2.1
Household and similar electrical appliances – Safety – Part 2-97: Particular requirements for drives for rolling shutters, awnings, blinds and similar equipment.
33
7,200
72. GYS CEI IEC 60335- 2-102: 2004
Household and similar electrical appliances – Safety – Part 2-102: Particular requirements for gas, oil and solid fuel burning appliances having electrical connections.
29
6,600
73. GYS CEI IEC 60335-2-103: 2002
Household and similar electrical appliances – Safety – Part 2-103: Particular requirements for drives for gates, doors and windows.
49
9,000
74. GYS CEI IEC 60335-2-104: 2004
Household and similar electrical appliances – Safety – Part 2-104: Particular requirements for appliances to recover and/or recycle refrigerant from air conditioning and refrigeration equipment.
87
13,100
75. GYS CEI IEC 60335-2-105: 2004
Household and similar electrical appliances – Safety – Part 2-105: Particular requirements for multifunctional shower cabinets.
31 7,200
76. GYS CEI IEC 60364-4-41: 2005 5th Edition
Low – voltage electrical installations – Part 4-41: Protection against electric shock.
65 10,600
77. GYS CEI IEC 60364-7-753: 2005
Low voltage electrical installations – Part 7-753: Requirements for special installations or locations – Floor and ceiling heating systems.
23
10,600
78. GYS CEI IEC 60461: 2001/3rd Edition
Time and control code for video tape recorders. 67 11,300
79. GYS CEI IEC 60510-3-4: 1992
Methods of measurements for radio equipment used in satellite earth stations – Part 3: Methods of measurement: Measurements for frequency division multicomplex (F.D.M) transmission.
43
8,300
80. GYS CEI IEC 60598- 1: 2003/ 6th Edition
Luminaries – Part 1: General requirements and tests. 363 25,400
81. GYS CEI IEC 60601-1: 2005 3rd Edition
Medical electrical equipment – Part 1: General requirements for basic requirements for basic safety nd essential performance.
777
36,900
82. GYS CEI IEC 60601-1-1: 2000 2nd Edition
Medical electrical equipment – Part 1-1: General requirements for safety – Collateral Standard: Safety requirements for medical electrical systems.
57 9,800
83. GYS CEI IEC Medical electrical equipment – Part 1-2: General 219 20,000
60601-1-2: 2004 Edition 2.1
requirements for safety – Collateral Standard: Electromagnetic compatibility – Requirements.
84. GYS CEI IEC 60601-1-3: 1994
Medical electrical equipment – Part 1: General requirements for safety – Collateral Standard: General requirements for radiation protection in diagnostic X-ray equipment.
99
14,100
85. GYS CEI IEC 60601-1-4: 2000
Medical electrical equipment – Part 1-4: General requirements for safety – Collateral Standard: Programmable electrical medical systems.
65
10,600
86. GYS CEI IEC 60601-1-6: 2004
Medical electrical equipment – Part 1-6: General requirements for safety – Collateral Standard: Usability.
147 17,400
87. GYS CEI IEC 60601-1-8: 2003
Medical electrical equipment – Part 1-8: General requirements for safety – Collateral Standard: General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems.
155
17,400
88. GYS IEC 60601-2- 51: 2003
Medical electrical equipment – Part 2-51: Particular requirements for safety, including essential performance, of recording and analyzing single channel and multichannel electrocardiographs.
175 18,700
89. GYS IEC 60704-2-13: 2000 + A 1: 2005
Household and similar electrical appliances – Test code for the determination of airborne acoustical noise – Part 2-13: Particular requirements for range hoods.
29; 10 6,600
4,400
90. GYS CEI IEC 60950- 1: 2005/ 2nd Edition
Information technology equipment – Safety – Part 1: General requirements.
610 32,500
91. GYS IEC 60968: 1999/Edition 1.2
Self – ballasted lamps for general lighting services - Safety requirements.
31 7,200
92. GYS IEC 60969: 2016/ Edition 2.0
Self – ballasted compact fluorescent lamps for general lighting services - Performance requirements.
webstore.iec. ch/csc
93. GYS IEC 61097- 6: 2005/ 2nd Edition
Global maritime distress and safety system (GMDSS) Part 6: Narrowband direct – printing telegraph equipment for the reception of navigational and meteorological warnings and urgent information to ships (NA VTEX).
43
8,300
94. GYS IEC/ TR 61158-1: 2003
Digital data communications for measurement and control – Fieldbus for use in industrial control systems– Part 1: Overview and guidance for the IEC 61158 series.
11
4,400
95. GYS IEC 61158-2: 2003/ 3rd Edition
Digital data communications for measurement and control – Fieldbus for use in industrial control systems – Part 2: Physical layer specification and service condition.
326
25,400
96. GYS IEC 61158-3: 2003/3rd Edition
Digital data communications for measurement and control – Fieldbus for use in industrial control systems – Part 3: Data link service definition.
315
24,100
97. GYS IEC 61158-4: 2003/3rd Edition
Digital data communications for measurement and control – Fieldbus for use in industrial control systems – Part 4: Data link protocol specification.
1,096
45,700
98. GYS IEC 61158-5: 2003
Digital data communications for measurement and control – Fieldbus for use in industrial control systems - Part 5: Application layer service definition.
1,256
50,100
99. GYS IEC 61158-6: 2003/ 3rd Edition
Digital data communications for measurement and control – Fieldbus for use in industrial control systems – Part 6: Application layer protocol specification.
1,304
50,100
100. GYS CEI IEC 61225 :2005/2nd Edition
Nuclear power plants – Instrumentation and control systems important to safety – Requirements for electrical supplies.
63 10,600
101. GYS CEI IEC 61241 -0: 2004
Electrical apparatus for use in the presence of combustible dust – Part 0: General requirements.
99
14,100
102. GYS CEI IEC 61241 -1: 2004
Electrical apparatus for use in the presence of combustible dust – Part 1: Protection by enclosures “tD”.
29
6,600
103. GYS IEC 61241-2-1: 1994
Electrical apparatus for use in the presence of combustible dust – Part 2: Test methods – Section 1: Methods for determining the minimum ignition temperatures of dust.
61 10,600
104. GYS CEI IEC 61300-3-18: 2005/2nd Edition
Fibre optic interconnecting devices and passive components – Basic test and measurement procedures - Part 3-18: Examinations and measurement s – Keying accuracy of an angled end face connector.
15 5,000
105. GYS CEI IEC 61300-3-29: 2005
Fibre optic interconnecting devices and passive components – Basic test and measurement procedures - Part 3-29: Examinations and measurements – Measurement techniques for characterizing the amplitude of the spectral transfer function of DWDM components.
63 10,600
106. GYS CEI IEC 61308: 2005/2nd Edition
High-frequency dielectric heating installations - Test methods for the determination of power output.
29 6,600
107. GYS CEI IEC 61326-1: 2005
Electrical equipment for measurement, control and laboratory use – EMC requirements – Part 1: General requirements.
37 7,700
108. GYS CEI IEC 61326-2-1: 2005
Electrical equipment for measurement, control and laboratory use – EMC requirements – Part 2-1: Particular requirements – Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications.
15
5,000
109. GYS CEI IEC 61326-2-2: 2005
Electrical equipment for measurement, control and laboratory use –EMC requirements – Part 2-2: Particular requirements – Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems.
19 11,300
110. GYS CEI IEC 61326-2-6: 2005
Electrical equipment for measurement, control and laboratory use – EMC requirements – Part 2-6: Particular requirements – In vitro diagnostic (IVD) medical equipment.
19
11,300
111. GYS CEI IEC 61347-2-2: 2006/ A 2: 2006/Edition 1.1
Lamp control gear – Part 2-2: Particular requirements for d.c. or a.c. supplied electronic step – down converters for filament lamps.
67 3
11,301 3,3000
112. GYS IEC 61400- 1: 2005/3rd Edition
Wind turbines – Part 1: Design requirements.
85 13,100
113. GYS CEI IEC 61400- 2: 2006/2nd Edition
Wind turbines – Part 2: Design requirements for small wind turbines.
179 18,700
114. GYS IEC 61400-11: 2002+ A 1: 2006 2nd Edition
Wind turbine generator systems – Part 11: Acoustic noise measurement techniques.
43;5 8,300 4,000
115. GYS IEC 61400-12-1: 2005
Wind turbines – Part 12-1: Power performance measurements of electricity producing wind turbines.
90 13,100
116. GYS IEC/TS 61400- 13: 2001
Wind turbine generator systems – Part 13: Measurement of mechanical loads.
69 11,300
117. GYS IEC/TS 61400- 14: 2005
Wind turbines – Part 14: Declaration of apparent sound power level and tonality values.
11 4,400
118. GYS CEI IEC 61400-21: 2001
Wind turbine generator systems – Part 21: Measurement and assessment of power quality characteristics of grid
85 13,100
connected wind turbines.
119. GYS IEC/TS 61400- 23: 2001
Wind turbine generator systems – Part 23: Full -scale structural testing of rotor blades.
63 10,600
120. GYS IEC/TR 61400- 24: 2002
Wind turbine generator systems – Part 24: Lightning protection.
69 11,300
121. GYS CEI IEC/TR 61508-0: 2005
Functional safety of electrical/electronic/ programmable electronic safety – related systems - Part 0: Functional safety and IEC 61508.
33 7,200
122. GYS CEI IEC 61508 -1: 1988
Functional safety of electrical/electronic/ programmable electronic safety – related systems - Part 1: General requirements.
115 15,200
123. GYS CEI IEC 61508-2: 2000
Functional safety of electrical/electronic/ programmable electronic safety– related systems - Part 2: Requirements for electrical/electronic/programmable electronic safety – related systems.
143 16,300
124. GYS CEI IEC 61508 -3: 1998
Functional safety of electrical/electronic/programmable electronic safety-related systems – Part 3: Software requirements.
95 14,100
125. GYS CEI IEC 61508 -4: 1998
Functional safety of electrical/electronic/programmable electronic safety – related systems – part 4: Definitions and abbreviations.
53 9,000
126. GYS CEI IEC 61508 -5: 1998
Functional safety of electrical/electronic/programmable electronic safety – related systems – Part 5: Examples of methods for the determination of safety integrity levels.
57 9,800
127. GYS CEI IEC 61508 -6: 2000
Functional safety of electrical/electronic/programmable electronic safety – related systems – Part 6: Guidelines on the application of IEC 61508-2 and IEC 61508-3.
145 17,400
128. GYS IEC 61508-7: 2000
Functional safety of electrical/electronic/programmable electronic safety – related systems – Part 7: Overview of techniques and measures.
229 21,500
129. GYS CEI IEC 61511 -1: 2003
Functional safety – Safety instrumented systems for the process industry sector – Part 1: Framework, definitions, system,
hardware and software requirements.
177 18,700
130. GYS CEI IEC 61511 -2: 2004
Functional safety – Safety instrumented systems for the process industry sector – Part 2: Guidelines for the application of IEC 61511-1.
159 17,400
131. GYS CEI IEC 61511- 3: 2004
Functional safety – Safety instrumented systems for the process industry process industry sector – Part 3: Guidelines for the determination of the required safety integrity levels.
113 15,200
132. GYS IEC 61606-4: 2005
Audio and audiovisual equipment – Digital audio parts - Basic measurement methods of audio characteristics – Part 4: Personal computer.
31 7,200
133. GYS CEI IEC 61755- 1: 2005
Fibre optic connector optical interfaces – Part 1: Optical interfaces for single mode non-dispersion shifted fibres – General and guidance.
27 6,600
134. GYS CEI IEC 61754- 6: 2005/Edition 1.2
Fibre optic connector interfaces – Part 6: Type MU connector family.
113 15,200
135. GYS IEC/TR 61850- 1: 2003
Communication networks and systems in substations – Part 1: Introduction and overview.
37 7,700
136. GYS IEC/TS 61850- 2: 2003
Communication networks and systems in substations – Part 2: Glossary.
42 8,300
137. GYS CEI IEC 61850- 3: 2002
Communication networks and systems in substations – Part 3: General requirements.
33 7,200
138. GYS CEI IEC 61850- 4: 2002
Communication networks and systems in substations – Part 4: System and project management.
59 9,800
139. GYS IEC 61850-5: 2003
Communication networks and systems in substations – Part 5: Communication requirements for functions and device models.
131 16,300
140. GYS IEC 61850-6: 2004
Communication networks and systems in substations – Part 6: Configuration description language for communication in electrical substations related to IEDs.
144
17,400
141. GYS IEC 61850-7-1: 2003
Communication networks and systems in substations – Part 7-1: Basic communication structure for substation and feeder equipment – Principles and models.
109
15,200
142. GYS IEC 61850-7-2: 2003
Communication networks and systems in substations – Part 7-2: Basic communication structure for substation and feeder equipment – Abstract communication service interface (ACSI).
169
18,700
143. GYS IEC 61850-7-3: 2003
Communication networks and systems in substations – Part 7-3: Basic communication structure for substation and feeder equipment – Common data classes.
64
10,600
144. GYS IEC 61850-7-4: 2003
Communication networks and systems in substations – Part 7-4: Basic communication structure for substation and feeder equipment – Compatible logical node classes and data classes.
104
15,200
145. GYS IEC 61850-8-1: 2004
Communication networks and systems in substations – Part 8-1: Specific Communication Service Mapping (SCSM) – Mappings to MMS (ISO 9506 and ISO 9506-2) and to ISO/IEC 8802-3.
133
16,300
146. GYS IEC 61850-9-1: 2003
Communication networks and systems in substations – Part 9-1: Specific Communication Service Mapping (SCSM) – Sampled values over serial unidirectional multidrop point to point link.
29
6,600
147. GYS IEC 61850-9-2: 2004
Communication networks and systems in substations – Part 9-1: Specific Communication Service Mapping (SCSM) – Sampled values over ISO/IEC 8802-3.
28
6,600
148. GYS IEC 61850- 10:2005
Communication networks and systems in substations – Part 10: Conformance testing.
43 8,300
149. GYS CEI IEC 61870- 1: 2005
Energy management system application program interface (EMS-API) – Part 1: Guidelines and general requirements.
81 12,100
150. GYS CEI IEC 62115: 2004/Edition 1.1
Electric toys – Safety.
75 12,100
151. GYS CEI IEC/TR 62263: 2005
Live working – Guidelines for the installation and maintenance of optical fibre cables on overhead power lines.
89 13,100
152. GYS IEC/PAS 62267: 2005
Railway applications – Automated Urban Guided Transport (AUGT) safety requirements.
33 7,200
153. GYSCEI IEC 62271- 2: 2003
High-voltage switchgear and control gear – Part 2: Seismic qualification for rated voltages of 72, 5kV and above.
45 14,100
154. GYS CEI IEC 62271- 100: 2003/Edition 1.1
High-voltage switchgear and control gear – Part 100: High-voltage alternating – current circuit – breakers.
579 32,500
155. GYS CEI IEC 62271- 101: 2006
High-voltage switchgear and control gear – Part 101: Synthetic testing.
281 22,800
156. GYS CEI IEC 62271- 102: 2001
High-voltage switchgear and control gear – Part 110: Inductive load switching.
187 18,700
157. GYS CEI IEC 62271-105: 2002
High-voltage switchgear and control gear – Part 105: Alternating current switch – fuse combinations.
95 14,100
158. GYS CEI IEC 62271- High-voltage switchgear and control gear – Part 107: 89 13,100
107: 2005 Alternating current fused circuit – switchers for rated voltages above 1 k V up to and including 52 kV.
159. GYS CEI IEC 62271-108: 2005
High-voltage switchgear and control gear – Part 108: High-voltage alternating current disconnecting circuit – breakers for rated voltages of 72, 5 k V and above.
47 9,000
160. GYS IEC/PAS 62271- 109: 2002/Edition 1.0
High-voltage switchgear and controlgear – Part 109: Alternating – current series capacitor by – pass switches.
92 13,100
161. GYS CEI IEC 62271- 110:2005
High-voltage switchgear and control gear – Part 110: Overheard, pad – mounted, dry vault, and submersible automatic circuit reclosers and fault interrupters for alternating current systems up to 38 Kv.
53
9,800
162. GYS IEC 62271- 111: 2005 IEEE C37.60
High-voltage switchgear and control gear – Part 111: Overhead, pad – mounted, dry vault, and submersible automatic circuit reclosers and fault interrupters for alternating current systems up to 38 Kv.
71 11,300
163. GYS CEI IEC 62271- 200: 2003
High-voltage switchgear and control gear – Part 200: AC metal-enclosed switchgear and control gear for rated voltages above 1 kV and up to and including 52 Kv.
169 18,700
164. GYS IEC 62271- 203: 2003
High –voltage switchgear and control gear – Part 203: Gas – insulated metal – enclosed switchgear for rated voltages above 52 Kv.
137 16,300
165. GYS CEI IEC/TR 62271-301: 2004
High-voltage switchgear and control gear – Part 301 : Dimensional standardisation of terminals.
9 4,400
166. GYS CEI IEC/TR 62271-308: 2002
High-voltage switchgear and control gear – Part 308: Guide for asymmetrical short –circuit breaking test duty T 100a.
89 13,100
167. GYS CEI IEC/TR 62271-310: 2004
High-voltage switchgear and control gear – Part 310: Electrical endurance testing for circuit – breakers of rated voltage 72, 5 kv and above.
55 9,800
168. GYS CEI IEC/TR 62354: 2005
General testing procedures for medical electrical equipment. 319 24,100
169. GYS IEC 62612: 2013
Self-ballasted LED lamps for general lighting services with supply voltages 250V – Performance requirements.
webstore.iec.
ch/csc
170. GYS IEC 62552-1: 2015
Household refrigerating appliances – Characteristics and test methods – Part 1: General requirements.
171. GYS IEC 62552-2: 2015
Household refrigerating appliances – Characteristics and test methods – Part 2: Performance requirements.
172. GYS IEC 62552-3: 2015
Household refrigerating appliances – Characteristics and test methods – Part 3: Energy consumption and volume.
173. GYS IEC 62612: 2013 Self-ballasted LED lamps for general lighting services with supply voltages > 50 V – Performance requirements
174. GYS 518: 2017 UL 496: 2017
Safety for Lampholders 109 15,200
175. GYS 519: 2018 UL 4: 2018
Safety for armored cable 26 6,600
176. GUYS 520: 2018 UL 67: 2017
Safety for Panelboards 179 18.700
177. GYS 521: 2018 UL 363: 2017
Safe for knife switches 31 7,200
178. GYS 522: 2018 UL 514B: 2014
Safe for Conduit, tubing and cable fittings. 146 17,400
179. GYS 524: 2018 UL 1447: 2017
Safe for Surge protective devices. 211 20,000
180. GYS 525: 2018 UL 489: 2016
Safe for Molded-case circuit breakers, molded-case switches and circuit-breaker enclosures.
301 24,100
181. GYS 526: 2018 UL 489B: 2016
Safe for Molded-case circuit breakers, molded-case switches, and circuit-breaker enclosures for use with photovoltaic.
18 5,000
182. GYS 528: 2018 UL 467: 2017
Safety for grounding and bonding equipment. 41 8,300
183. GYS 529: 2018 UL 817: 2017
Safety for cord sets and power-supply cords. 191 18,700
184. GYS 530: 2018 UL 1072: 2018
Safety for medium-voltage power cables. 122 15,200
185. GYS 531: 2018 UL 44: 2018
Safety for thermoset-insulated wires and cables. 114 15,200
186. GYS 532: 2018 UL 83: 2017
Safety for thermoplastic-insulated wires and cables. 80 12,100
187. GYS 533: 2018 UL 498: 2018
Safety for attachment plugs and receptacles. 336 25,400
188. GYS 534: 2018 UL 1581: 2017
Safety for reference standard for electrical wires, cables and flexible cords.
149 17,400
189. GYS 535: 2018 UL 2255: 2016
Safety for Receptacles closures. 13 5,500
190. GYS 536: 2018 UL 1561: 2015
Safety for Dry-Type general purpose and power transformers.
56 9,800
191. GYS 537: 2018 UL 1682: 2017
Safety for Plugs, receptacles, and cable connectors of the pin and sleeve type.
106 15,200
192. GYS 538: 2018 UL 1066: 2017
Safety for low-voltage, AC and DC power, circuit breakers used in enclosures.
102 14,100
193. GYS 539: 2018 UL 1838: 2017
Safety for low-voltage landscape lighting systems. 90 13,100
194. GYS 540: 2018 UL 2108: 2017
Safety for low-voltage lighting systems. 74 11,300
195. GYS 542: 2019 UL 6: 2007
Safety for electrical rigid metal conduit – Steel. 38 7,700
196. GYS 543: 2019 UL 541A: 2013
Safety for metallic outlet boxes. 90 13,100
197. GYS 544: 2019 UL 514C: 2018
Safety for non-metallic outlet boxes, flush-device boxes, and covers.
100 1,100
198. GYS 546: 2019 UL 1567: 2016
Safety for Receptacles and switches intended for use with aluminum wire.
14 5,000
199. GYS 547: 2019 UL 2388: 2017
Safety for Flexible lighting products. 39 7,700
200. GYS 548: 2019 UL 8750: 2018
Safety for Lighting emitting diode (LED) equipment for use in lighting products.
128 16,300
201. GYS 549: 2019 UL 2556: 2015
Safety for Wire and cable test methods. 237 21,500
202. GYS 550: 2019 UL 773A: 2016
Safety for Nonindustrial photoelectric switches for lighting control.
86 13,100
203. GYS 551: 2019 UL 231: 2016
Safety for Power outlets. 89 13,100
204. GYS 552: 2019 Safety for Flat - Plate Photovoltaic Modules and Panels. 125 16,300
UL 1703: 2018
205. GYS 553: 2019 UL 61730-1: 2017
Safety for Plate Photovoltaic (PV) Module Safety Qualification - Part 1: Requirements for Construction.
68 11,300
206. GYS 554: 2019 UL 61730-2: 2017
Safety for Plate Photovoltaic (PV) Module Safety Qualification - Part 2: Requirements for Testing.
71 11,300
207. GYS 558: 2019 UL 1741: 2018
Safety for Inverters, converts, controllers and inter- connection system equipment for use with distributed energy resources.
230 21,500
208. GYS 559: 2019 UL 4703: 2017
Safety for Photovoltaic wire.
11 4,400
209. GYS 560: 2019 UL 1699: 2017
Safety for Arc-Fault circuit-interrupters.
86 13,100
210. GYS 561: 2019 UL 6703: 2017
Safety for Connectors for use in photovoltaic systems.
24 6,100
211. GYS 562: 2019 UL 4248-19: 2015
Safety for Fuseholders – Part19: Photovoltaic fuseholders.
4 3,300
CATEGORY – ENERGY MANAGEMENT STANDARDS (6) PAGE PRICE IEC Webstore
1. GYS 503: 2019 ISO 50001: 2018/FR
Energy management systems - Requirements with guidance for use.
22 6,100
2. IEC 62612: 2013 Self-Ballasted led Lamps for General Lighting Services with supply voltages 50v –Performance Requirements.
webstore.iec.ch/csc
3. IEC 60969: 2016 Self-Ballasted Compact Fluorescent Lamp for General Lighting Services – Performance Requirements.
webstore.iec.ch/csc
4. IEC 62552-1: 2015 Household Refrigeration Appliances Characteristics and Test Methods – Part 1 – General Requirements
webstore.iec.ch/csc
5. IEC 62552-2: 2015 Household Refrigerating Appliances – Characteristics and Test Methods – Part 2 – Performance Requirements.
webstore.iec.ch/csc
6. IEC 62552-3: 2015 Household Refrigeration Appliances – Characteristics and Test Methods Part 3 – Energy Consumption and Volume
webstore.iec.ch/csc
CATEGORY – ENVIRONMENTAL STANDARDS (31)
PAGE PRICE
1. GYS 9 – 10: 2014 First Revision
Specification for labelling of commodities – Part 10: Labelling of equipment, items and parts containing refrigerants.
10 4,400
2.
GYS 89: 2015 ISO 14001: 2015/2nd Rev
Environmental management systems – Requirements with guidance for use.
35 7,200
3. GYS 167-3: 1996 ISO 7574-3: 1985
Acoustics – Statistical methods for determining and verifying stated noise emission values of machinery and equipment – Part 3: Simple (transition) method for stated values for batches of machines.
2 3,300
4. GYS 167 – 4: 1996 ISO 7574 – 4: 1985
Acoustics- Statistical methods for determining and verifying stated noise emission values of machinery and equipment – Part 4: Methods for stated values for batches of machines.
14 5,000
5. GYS 207: 2002 Interim guidelines for industrial effluent discharge into the environment.
17 5,500
6. GYS 229-3: 2003 Methods of sampling and testing for water and wastewater- Part 3: Biochemical oxygen demand- Five days (BOD5).
17 5,500
7. GYS 229-4: 2003 Methods of sampling and testing for water and wastewater: Part 4 - Chemical oxygen demand.
13 5,000
8. GYS 229-5: 2003 Methods of sampling and testing for water and wastewater: Part 5 -Solids.
8 4,000
9. GYS 229-6: 2005 Methods of sampling and testing for water and wastewater: Part 6 – Dissolved oxygen.
11 4,400
10. GYS 229-7: 2003 Methods of sampling and testing for water and wastewater: Part 7 - Nitrogen (Ammonium).
10 4,400
11. GYS 229-9: 2003 Methods of sampling and testing for water and wastewater: Part 9 – Phosphorus.
9 4,400
12. GYS 229-12: 2005 Methods of sampling and testing for water and wastewater: Part 12 - Chloride.
11 4,400
13. GYS 229-13: 2003 Methods of sampling and testing for water and wastewater: Part 13- Surfactants.
10 4,400
14. GYS 229-14: 2004 Methods of sampling and testing for water and wastewater: Part 14 Phenols.
9 4,400
15. GYS 229-15: 2003 Methods of sampling and testing for water and wastewater: Part 15- Coliform.
13 5,000
16. GYS 229-16: 2004 Methods of sampling and testing for water and wastewater: Part 16 - Oil and grease.
11 4,400
17. GYS 229-18 : 2003 Methods of sampling and testing for water and wastewater: Part 18 -Lead.
5 4,000
18. GYS 229-21-:2004 Methods of sampling and testing for water and wastewater: Part 21 – Copper.
9 4,400
19. GYS 229-22 : 2005 Methods of sampling and testing for water and wastewater: Part 22 - Zinc.
5 4,000
20. GYS 229-23: 2005 Methods of sampling and testing for water and wastewater: Part 23: Nickel
5 4,000
21. GYS 229-24: 2004 Methods of sampling and testing for water and wastewater: Part 24: Iron
9 4,400
22. GYS 248: 2003 ISO 14021: 1999
Environmental labels and declarations - Self-declared environmental claims (Type 11 environmental labelling).
23 6,100
23. GYS 249: 2003 ISO 14024: 1999
Environmental labels and declarations - Type 1 environmental labelling - Principles and procedures.
11 4,400
24. GYS 250: 2003 ISO 14031: 1999
Environmental management - Environmental performance evaluation - Guidelines.
32 7,200
25. GYS 263: 2010 Guidelines for noise emission into the environment. 5 4,000
26. GYS 280: 2006 ISO/TR 14032: 1999
Environmental management – Examples of environmental performance evaluation (EPE).
93 13,100
27. GYS 455: 2009 ISO 14004: 2004
Environmental management systems – General guidelines on principles, systems and support techniques.
39 7,700
28. GYS 456: 2009 ISO 14015: 2001
Environmental management – Environmental assessment of sites and organizations.
19 5,500
29. GYS 476: 2009 ISO 14064-1: 2006
Greenhouse gases – Pt. 1: Specification with guidance at the organization level for quantification and reporting of greenhouse gas emissions and removals.
20 5,500
30. GYS 477: 2009 ISO 14064-2: 2006
Greenhouse gases – Pt. 2: Specification with guidance at the project level for quantification, monitoring and reporting of greenhouse gas emissions reduction or removal
28 6,600
enhancements.
31. GYS 478: 2009 ISO 14064-3: 2006
Greenhouse gases – Pt. 3: Specification with guidance for the validation and verification of greenhouse gas assertions.
34 7,200
FERTILIZER STANDADS (2)
PAGE PRICE
1. GYS 233: 2003 Specification for urea fertilizer grade. 21 6,100
2. GYS 517: 2017
ISO 7409: 1984
Fertilizers – Marking – Presentation and
declarations.
2 3,300
FINANCE STANDARDS (1) PAGE PRICE
1. GYS 501: 2013 Brand valuation – Requirements for monetary brand valuation. 11 4,400
CATEGORY – FOOD STANDARDS (52) PAGE PRICE
1. GYS 9 -9: 2013 CRS 5: 2010/2nd Rev
Specification for labelling of pre-packaged foods. 28 6,600
2. GYS 9-11: 2002 Specification for labelling of commodities – Part 11: Labelling of brewery products (beer, stout, shandy and malta).
6 4,000
3. GYS 9-19: 2018 Specification for labelling of commodities - Part 19: Labelling of biodegradable food containers.
2 3,300
4. GYS 10: 2007/ 1st Rev Specification for salt. 11 4,400
5. GYS 12: 2013 CRS 1: 2010/1st Rev
Specification for packaged water.
14 5,000
6. GYS 14: 1996 Specification for white sugar. 4 3,300
7. GYS 15: 1995 Specification for powdered (icing) sugar. 4 3,300
8. GYS 16: 1995 Specification for sugar for canning. 4 3,300
9. GYS 17: 2004/1st Rev. Specification for brown sugar. 4 3,300
10. GYS 18: 1995 Specification for sampling and methods of analysis of sugar. 34 7,200
11. GYS 19: 2003/1st Rev Specification for vinegar. 6 4,000
12. GYS 29: 1995 Specification for curry powder. 5 4,000
13. GYS 33: 2003/1st Rev Specification for wheat flour. 67 11,300
14 GYS 34: 2003/1st Rev. Specification for biscuits. 15 5,000
15. GYS 35 : 1996 Specification for shortening. 7 4,000
16. GYS 36: 1996 Specification for margarine and cooking margarine. 8 4,000
17. GYS 37: 2006 CCS 0025 : 1992
Specification for rum. 18 5,500
18. GYS 38: 2001/1st Rev Specification for jams, (fruit preserves) and jellies. 25 6,100
19. GYS 53: 2016 Specification for salted fish and dried salted fish. 25 6,100
20. GYS 54: 1996 Specification for coconut oil. 7 4,000
21. GYS 192: 2000 Specification for bread and rolls. 39 7,700
22. GYS 209: 2010 ISO 22002-1: 2009
Prerequisite programmes on food safety – Part 1: Food manufacturing.
19 5,500
23. GYS 211: 2014 CRS 44: 2013/1st Rev
Rice – Specification. 20 5,500
24. GYS 211: 2017 ISO 7301: 2011
Rice - Specification 19 5,500
25. GYS 219 : 2003 Specification for ice-cream and related products. 24 6,100
26. GYS 246: 2010 CRS 19: 2010
Specification for cassava bread. 11 4,400
27. GYS 258: 2006 Specification for brewery products. 12 4,400
CRS 0047: 2003 (Revised 2004)
28. GYS 261: 2006 CCS 0050: 2004
Specification for carbonated beverages.
37 7,700
29. GYS 262: 2004 Specification for drinking water. 10 4,400
30. GYS 266: 2006 CCS 0044: 1998 Revised 2003
Requirements for the labelling of brewery products (Beer, stout, shandy, malta).
5 4,000
31. GYS 267:2007 Specification for nutrition labelling. 29 6,600
32. GYS 459: 2009 Specification for Milk 28 6,600
33. GYS 460: 2016 Specification for honey. 9 4,400
34. GYS 461: 2018 ISO 22000: 2005
Food safety management systems – Requirements for any organization in the food chain.
32 7,200
35. GYS 462: 2009
Food safety management systems –Requirements for ISO 22003:2007 bodies providing audit and certification of food safety management systems.
16 5,000
36. GYS 463: 2009 Food safety management systems – Guidance on the application of ISO 22004: 2005.
13 5,000
37. GYS 464: 2009
Traceability in the feed and food chain – General principles and basic requirements for system design and implementation.
8 4,000
38. GYS 492: 2016 Specification for achar, amchar and kuchela. 13 5,000
39. GYS 494: 2010 CRS 27: 2010
Specification for fruit and vegetable juices and drinks, and fruit nectars.
23 6,100
40. GYS 506: 2013 CRS 35: 2010
Specification for spices and sauces. 26 6,600
41. GYS 508: 2010 CRS 3: 2010
Specification for packaged natural coconut water 5 4,000
42. GYS 516: 2017 Requirements for water re-filling premises. 7 4,000
43. GYS 545: 2019 CRS 32: 2018
Processed foods Pasta products – Specification. 11 4,400
44. GCP 10: 2003 Code of practice for the production of rice 18 5,500
45. GCP 20 : 2004 Code of Practice for street vended foods. 13 5,000
46. GCP 22 : 2005
Code of Practice for the production, processing, labelling and marketing of organically produced foods.
51 9,000
47. GCP 23 : 2005 Code of Practice for the cultivation of paddy. 20 5,500
48. GCP 24: 2006 CCS 0048: 2003
Code of hygienic practice for the collecting, processing and marketing packaged water (Mineral water, spring water, purified water).
17 5,500
49. GCP 29: 2013 CRCP 1: 2010
Code of Practice for package water. 15 5,000
50. GCP 30: 2013 CRCP: 2010
Code of Practice for packaged natural coconut water. 9 4,400
51. GCP 32: 2009 CRCP 5: 2010
Code of Practice for General Principles of food hygiene. 19 5,500
52. GCP 33: 2009 Code of hygienic practice for Milk and milk products. 28 6,600
53. GCP 34: 2010 CRCP 6: 2010
Code of Practice for preparation of frozen fruit pulp and purées.
19 5,500
FOOTWEAR STANDARDS (14) PAGE PRICE
1. GYS 9-4: 2003
First Revision
Specification for labelling of commodities – Part 4: Labelling
of footwear.
5 4,000
2. GYS 30: 2016 Specification for footwear 12 4,400
3. GYS 479: 2009 ISO 17693: 2004
Footwear –Test methods for uppers – Resistance to damage on lasting.
5 4,000
4. GYS 480: 2009 ISO 17694: 2003
Footwear –Test methods for uppers and lining – Flex resistance.
6 4,000
5. GYS 481: 2009 ISO 17696: 2004
Footwear – Test methods for uppers, linings and socks – Tear strength.
6 4,000
6. GYS 482: 2009 ISO 17707: 2005
Footwear – Test methods for outsoles – Flex resistance. 8 4,000
7. GYS 483: 2009 ISO 17709: 2004
Footwear – Sampling location, preparation and duration of conditioning of sample and test pieces.
10 4,400
8. GYS 484: 2009 ISO 20863: 2004
Footwear – Test methods for stiffeners and toepuffs – Bondability.
5 4,000
9. GYS 485: 2009 ISO 17702: 2003
Footwear – Test methods for uppers – Water resistance. 8 4,000
10. GYS 486: 2009 ISO 177708:2003
Footwear – Test methods for whole shoe – Upper sole adhesion.
9 4,400
11. GYS 487: 2009 ISO 19958: 2004
Footwear – Test methods for heels and toe pieces – Top piece retention strength.
6 4,000
12. GYS 488: 2009 ISO 20871: 2001
Footwear – Test methods for outsoles – Adhesion resistance. 9 4,400
13. GYS 489: 2009 ISO 20864: 2004
Footwear – Test methods for stiffeners and toepuffs – Mechanical characteristics.
16 5,000
14. GCP 5 : 1997
Code of Practice for footwear: Purchasing, care and handling of complaints.
7 4,000
CATEGORY – GOVERNANCE AND ETHICS STANDARDS (1) PAGE PRICE
1. GYS 502: 2013
ISO 26000: 2010
Guidance on social responsibility. 106 15,200
CATEGORY - INFORMATION TECHNOLOGY STANDARDS (20) PAGE PRICE
1. GYS 299: 2006 ISO/IEC 9314-8: 1998
Information technology – Fibre Distributed Data interface (FDDI) – Part 8: Media Access Control -2 (MAC-2).
98 14,100
2. GYS 300: 2006 ISO/IEC 9316: 1995/2nd Edition
Information technology – Small Computer System Interface – 2.
439 27,600
3. GYS 301: 2006 ISO/IEC 9316-2: 2000
Information technology – Small Computer System Interface 2(SCSI- 2) – Part 2: Common Access Method (CAM) transport and SCSI interface module.
119
15,200
4. GYS302: 2006+ ISO/IEC 10918- 1: 1994
Information technology – Digital compression and coding of continuous – tone still images: Requirements and guidelines.
182
18,700
5.
GYS 303: 2006 ISO/IEC 10192-1: 2002
Information technology – Home Electronic System (HES) interfaces – Part 1: Universal Interface (UI) Class 1.
32 7,200
6. GYS 304: 2006 ISO/IEC/TR– 10192 - 2: 2000
Information technology – Home Electronic System (HES) interfaces Part 2: Sample Interface Type 1.
17 5,500
7. GYS 305: 2006 ISO/IEC 11172-3: 1993
Information technology – Coding of moving pictures and associated audio for digital storage media at up to and about 1,5 Mbit/s – Part 3 : Audio.
150 17,400
8. GYS 306: 2006 ISO/IEC 11801: 2000/ 2nd Edition
Information technology – Generic cabling for customer premises.
136 16,300
9. GYS 307: 2006 ISO/IEC 12207: 1995 A 1: 2002
Information technology – Software life cycle processes.
57;53 9,800 9,800
10. GYS 308: 2006 ISO/IEC 13239: 2002
Information technology – Telecommunications and information Exchange between systems - High - level data link and control (HDLC) procedures.
128 16,300
11. GYS 309: 2006 ISO/IEC 13818-3: 1998/ 2nd Edition
Information technology – Generic coding of moving pictures and associated audio information – Part 3: Audio.
115 15,200
12. GYS 310: 2006 ISO/IEC 14496-0: 2005/2nd Edition
Information technology – Coding of audio - visual objects – Part 10: Advanced video coding.
335
24,400
13. GYS 311: 2006 ISO/IEC 14496- 11: 2005
Information technology – Coding of audio – visual objects – Part 11: Scene description and application engine.
513 29,700
14. GYS 312: 2006 ISO/IEC 14709- 1: 1997+ A 1: 2004
Information technology – Configuration of customer premises cabling (CPC) for applications – Part 1: Integrated Services Digital Network (ISDN) basic access.
16 9
5,000 4,400
15. GYS 313: 2006 ISO/IEC 15476- 4: 2005
Information technology – CDIF semantic metamodel – Part 4: Data models.
113 15,200
16. GYS 314: 2006 ISO/IEC 18010: 2002 +A 1: 2005
Information technology – Pathways and spaces for customer premises cabling.
26;24 6,600 6,100
17. GYS 315: 2006 ISO/IEC 18028- 3: 2005
Information technology – Security techniques – IT network security – Part 3: Securing communications between networks using security gateways.
6,100
18. GYS 316: 2006 ISO/IEC 20000- 1: 2005
Information technology – Service management – Part 1: Specification.
16 5,000
19. GYS 317: 2006 ISO/IEC 20000-2: 2005
Information technology – Service management – Part 2: Code of Practice.
34 7,200
20. GYS 318: 2006 ISO/IEC 21117: 2005
Information technology – Office equipment – Copying machines and multi-function devices – Information to be included in specification sheets and related forms.
26 6,600
CATEGORY – JEWELLERY STANDARDS (1) PAGE PRICE
1. GYS 50: 2010 CRS 17: 2010/2nd Rev.)
Specification for gold articles. 16 5,000
CATEGORY – LABELLING STANDARDS (22) PAGE PRICE
1. GYS 9 –1: 2017 CRS 55-1: 2016/1st Rev
Labelling of Goods - Part 1: General requirements. 4 3,300
2. GYS 9 –2: 2017 CRS 55-2: 2016/1st Rev
Labelling of Goods – Part 2: Specific requirements for pre-packaged goods.
8 4,000
3. GYS 9-3: 2004 (First Revision)
Specification for labelling of commodities – Part 3: Labelling of retail packages of cigarettes.
5 4,000
4. GYS 9 – 3: 2009 Second Revision
Specification for the labelling of retail packages of tobacco products.
23 6,100
5. GYS 9-3: 2014
CRS 26: 2013
Labelling of tobacco products. 34 7,200
Third Revision (511)
6. GYS 9- 4: 2003 (First revision)
Specification for labelling of commodities – Part 4: Labelling of footwear.
5 4,000
7. GYS 9-5: 2002(1st Rev.)
Specification for labelling of commodities - Part 5: Labelling of furniture.
2
3,300
8. GYS 9-6: 2003 (First revision)
Specification for labelling of commodities - Part 6: Labelling of animal feeds.
3 3,300
9. GYS 9 – 7: 2005 First Rev/Amd. 1, 2019
Specification for labelling of commodities – Part 7: Labelling of electrical equipment, fittings and household electrical appliances.
5 4,000
10. GYS 9 – 8: 1998
Specification for labelling of commodities – Part 8: Labelling of cosmetics.
17 5,500
11. GYS 9 -9: 2013 CRS 5: 2010/(2nd Rev)
Specification for labelling of pre-packaged foods. 28 6,600
12. GYS 9 – 10: 2002 Specification for labelling of commodities – Part 10: Labelling of equipment, items and parts containing refrigerants.
10 4,400
13. GYS 9-11: 2002 Specification for labelling of commodities – Part 11: Labelling of brewery products (beer, stout, shandy and malta).
6 4,000
14. GYS 9 –12: 2002
Specification for labelling of commodities – Part 12: Labelling of toys and playthings.
5 4,000
15. GYS 9-13: 2003
Specification for labelling of commodities – Part 13: Labelling of household chemicals.
8 4,000
16. GYS 9-14: 2003
Specification for labelling of commodities – Part 14: Labelling of hazardous industrial chemicals.
23 6,100
17. GYS 9-15: 2003
Specification for labelling of commodities- Part 15: Labelling of garments.
3 3,300
18. GYS 9-16: 2003
Specification for labelling of commodities- Part 16: Labelling of textiles.
6 4,000
19. GYS 9 -17: 2004
Specification for labelling of commodities – Part 17: Labelling of protective helmets for road users.
6 4,000
20. GYS 9-18:2005
Specification for labelling of commodities - Part 18: Labelling of seeds.
6 4,000
21. GYS 9-19: 2018 Specification for labelling of commodities - Part 19: Labelling of biodegradable food containers.
2 3,300
22. GYS 541: 2018 Specification for the labelling, packaging and testing of toys and playthings.
5 4,000
CATEGORY – LABORATORY STANDARDS (6) PAGE PRICE
1. GYS 235: 2003 General requirements for safety in laboratories. 49 9,000
2. GYS 265: 2013 ISO 15189: 2012/1st Rev
Medical laboratories – Particular requirements for quality and competence.
50 9,000
3. GYS 268: 2007 Requirement for point-of-care testing (POCT) sites. 41 8,300
4. GYS 470: 2009 ISO 22870: 2006
Point of Care Testing (POCT) Requirements for quality and competence.
11 4,400
5. GYS 475: 2009 ISO 15190: 2003
Medical Laboratories – Requirements for safety.
39 7,700
6. GCP 8: 1999 Code of safety for chemical laboratories. 17 5,500
CATEGORY –MANAGEMENT SYSTEMS STANDARDS (19) PAGE PRICE
1. GYS 42-3: 1996 ISO 9000-3: 1997
Quality management and quality assurance standards - Part 3: Guidelines for the application of ISO 9001: 1994 to the development, supply, installation and maintenance of computer software.
13 5,000
2. GYS 181: 1999 A definition of year 2000 conformity requirements. 13 5,000
3. GYS 183: 1999 ISO 2859-1:1989
Sampling procedures for inspection by attributes- Part 1: Sampling schemes indexed by acceptable quality level (AQL) for lot-by-lot inspection.
67 11,300
4.
GYS 231: 2010 CRS 14: 2010/1st Rev
Requirements for good management practices for micro, small and medium enterprises.
14 5,000
5.
GYS 237: 2016 ISO 9000: 2015/1st Rev
Quality management systems – Fundamentals and vocabulary.
51 9,000
6.
GYS 238: 2015 ISO 9001: 2015/2nd Rev
Quality management systems - Requirements.
29 6,600
7.
GYS 239: 2003 ISO 9004: 2000
Quality management systems - Guidelines for performance improvements.
56 9,800
8.
GYS 244: 2003 ISO/TR 10013:2001
Guidelines for quality management system documentation. 14 5,000
9.
GYS 254: 2018 ISO 19011: 2018/SR
Guidelines for auditing management systems.
44 8,300
10.
GYS 271: 2006 ISO 15489-1: 2001
Information and documentation – Records management Part 1: General.
19 5,500
11.
GYS 272: 2006 ISO/TR 15489-2:2001
Information and documentation – Records management Part 2: Guidelines.
39 7,700
12
GYS 281: 2006 ISO 10002: 2004
Quality management – Customer satisfaction Guidelines for complaints handling in organisations.
23 6,100
13. GYS 468: 2009 ISO 10019: 2005
Guidelines for the Selection of Quality Management System consultants and use of their services.
13 5,000
14. GYS 469: 2009 ISO 10003: 2007
Quality Management – Customer satisfaction – Guidelines for dispute resolution external to organization.
34 7,200
15.
GYS 471: 2009 ISO 10001: 2007
Quality Management – Customer Satisfaction - Guidelines for Codes of Conduct for organization.
18 5,500
16. GYS 497: 2003 ISO 10015: 1999
Quality management – Guidelines for training. 14 5,000
17. GYS 504: 2013 ISO 10018: 2012
Quality Management – Guidance on people involvement and competence.
23 6,100
18. GYS 505: 2013 ISO 21500: 20123
Guidance on project management. 36 7,700
19. GCP 16 : 2003 Code of Practice for product recall procedures. 8 4,000
CATEGORY - MECHANICAL ENGINEERING STANDARDS (43) PRICE PRICE
1. GYS 82: 1998 Specification for automobile exhaust emissions. 4 3,300
2. GYS 113 : 1996 ISO 4866 : 1990
Mechanical vibration and shock – Vibration of buildings – Guidelines for the measurement of vibrations and evaluation of their effects on buildings.
18 5,500
3. GYS 115: 1996 ISO 3452 : 1984
Non-destructive testing – Penetrant inspection - General principles.
9 4,400
4. GYS 116 : 1996 ISO 3453: 1984
Non-destructive testing – Liquid penetrant inspection - Means of verification.
3 3,300
5. GYS 117: 1996 ISO 5580: 1985
Non-destructive testing – Industrial radiographic illuminators – Minimum requirements.
3
6. GYS 119 : 1996 ISO 9935: 1992
Non-destructive testing – Penetrant flaw detectors - General technical requirements.
4 3,300
7. GYS 120-1: 1996 ISO 4386-1: 1 992
Plain bearings – Metallic multilayer plain bearings - Part 1: Non-destructive ultrasonic testing of bond.
10 4,400
8. GYS 120-2: 1996 ISO 4386-2 : 1982
Plain-bearings –Metallic multilayer plain bearings - Part 2 : Destructive testing of bond for bearing metal layer thickness greater than or equal to 2mm.
4 3,300
9. GYS 120-3: 1996 ISO 4386-3 : 1992
Plain bearings – Metallic multilayer plain bearings - Part 3: Non-destructive penetrant testing.
10 4,400
10. GYS 122: 1996 ISO 9303 : 1989
Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes – Full peripheral ultrasonic testing for the detection of longitudinal imperfections.
4 3,300
11. GYS 123: 1996 ISO 9304 : 1989
Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes – Eddy current testing for the detection of imperfections.
7 4,000
12. GYS 124: 1996 ISO 9305: 1989
Seamless steel tubes for pressure purposes - Full peripheral ultrasonic testing for the detection of transverse imperfections.
4 3,300
13. GYS 125 : 1996 ISO 9764 : 1989
Electric resistance and induction welded steel tubes for pressure purposes – Ultrasonic testing of the weld seam for the detection of longitudinal imperfections.
3 3,300
14. GYS 126 : 1996 ISO 9765 : 1990
Submerged arc-welded steel tubes for pressure purposes – Ultrasonic testing of the weld seam for the detection of longitudinal and/or transverse imperfections.
4 3,300
15. GYS 127 : 1996 ISO 10332 : 1994
Seamless and welded (except submerged arc- welded) steel tubes for pressure purposes – Ultrasonic testing for verification of hydraulic leak tightness.
4 3,300
16. GYS 128: 1996 ISO 10543: 1993
Seamless and hot stretch reduced welded steel tubes for pressure purposes – Full peripheral ultrasonic thickness testing.
3 3,300
17. GYS 129 : 1996 ISO 11484: 1994
Steel tubes for pressure purposes – Qualification and certification of non-destructive testing (NDT) personnel.
12 5,000
18. GYS 130: 1996 ISO 11496: 1993
Seamless and welded steel tubes for pressure purposes – Ultrasonic testing of tube ends for the detection of laminar imperfections.
3 3,300
19. GYS 134: 1996 ISO 6947: 1990
Welds – Working positions – Definitions of angles of slope and rotation.
8 4,000
20. GYS 137: 1996 ISO 5182: 1991
Welding – Materials for resistance welding electrodes and ancillary equipment.
9 4,400
21. GYS 139: 1996 ISO 6848: 1984
Tungsten electrodes for inert gas shielded arc and for plasma welding, cutting and welding – Codification.
4 3,300
22. GYS 142: 1996 ISO 5175: 1987
Equipment used in gas welding, cutting and allied processes – Safety devices for fuel gases and oxygen or compressed air– General specifications, requirements and tests.
8 4,000
23. GYS 144: 1996 ISO 5822: 1998
Spot welding equipment – Taper plug gauges and taper ring gauges. 4 3,300
24. GYS 145: 1996 ISO 5829: 1984
Resistance spot welding – Electrode adaptors, female taper 1: 10.
2 3,300
25. GYS 146: 1996 ISO 7286: 1986
Graphical symbols for resistance welding equipment.
8 4,00
26. GYS 148: 1996 ISO 7931: 1985
Insulation caps and bushes for resistance welding equipment. 2 3,300
27. GYS 149: 1996 ISO 9090: 1989
Gas tightness of equipment for gas welding and allied processes.
4 3,300
28. GYS 152: 1996 ISO 5817: 1992
Arc-welded joints in steel – Guidance on quality levels for imperfections.
9 4,400
29. GYS 156: 1996 ISO 3677: 1992
Fill metal for soft soldering, brazing and braze welding – Designation.
2 3,300
30. GYS 157: 1996 ISO 4986: 1992
Steel castings – Magnetic particle inspection.
20 5,500
31. GYS 158: 1996 ISO 4987: 1992
Steel castings – Penetrant inspection.
11 4,400
32. GYS 159: 1996 ISO 4993: 1987
Steel castings – Radiographic inspection.
2 3,300
33. GYS 161: 1996 ISO 5948: 1994
Railway rolling stock material – Ultrasonic acceptance testing. 7 4,000
34. GYS 162: 1996 ISO 9915: 1992
Aluminum alloy castings – Radiography testing. 15 5,500
35. GYS 163: 1996 ISO 9916: 1991
Aluminum alloy and magnesium alloy castings - Liquid penetrant.
13 5,000
36. GYS 164: 1996 ISO 10049: 1992
Aluminum alloy castings – Visual method for Assessing the porosity.
3 3,300
37. GYS 166: 1996 (ISO 7593: 1986)
Chain slings assembled by methods other than Welding - Grade T (8).
15 5,000
38. GYS 191 – 9: 1999 ANSI/ASME B30.9b - 1987
Slings.
9
4,000
39. GYS 191 – 10: 1999 ANSI/ASME B 30 - 1990
Hooks.
11
5,000
40. GYS 191 – 17: 1999/ANSI/ASME B 30.17d - 1990
Overhead and gantry cranes (Top running bridge, single girder, underhung hoist).
14 5,000
41. GYS 206: 2001 JIS D 4604: 1979
Seat belt assemblies. 24 6,100
42. GYS 228-5: 2003 ASME/ANSI B 30.5:1989
Crane code – Part 5: Mobile and locomotive cranes.
109
9,000
43. GYS 274: 2006 ISO/TR 13352: 1997
Guidelines for interpretation of ISO series for application within iron ore industry.
16 5,000
MISCELLANEOUS STANDARDS (1) PAGE PRICE
1. GYS 256: 2004 Guide for drafting and presentation of Guyana standards. 61 10,600
CATEGORY – OPTICS & OPTICAL INSTRUMENTS (1) PRICE PRICE
1. GYS 111: 1996 ISO 8429:1 986
Optics and optical instruments – Ophthalmology - Graduated dial scale
1 3,300
CATEGORY – PAINTS AND SURFACE COATINGS STANDARDS (7) PAGE PRICE
1. GYS 55: 1996 Methods of test for paints and surface coatings. 27 6,600
2. GYS 56: 1996 Specification for the limit on lead content in paints. 18 5,500
3. GYS 176: 1998 Specification for paint - Interior and exterior, emulsion type,
flat.
5 4,000
4. GYS 177: 1998
Specification for paint - Emulsion type, interior and exterior, low sheen and semi-gloss.
5 4,000
5. GYS 178: 1998 Specification for paint - Interior and exterior, oil modified 4 4,000
alkyd.
6. GYS 225: 2003 Specification for lacquer. 17 5,500
7. GYS 226 : 2003 Methods of sampling and test for thinners and solvents for
paints.
27 6,600
CATEGORY – PAPER BOARD & PULPS STANDARDS (1) PAGE PRICE
1. GYS 189: 2010 Specification for toilet tissue. 15 5,000 CATEGORY - PETROLEUM STANDARDS (8) PAGES PRICE
1. GYS 175: 1998 Specification for compressed oxygen gas for industrial use only. 5 4,000
2. GYS 197: 2001 Specification for unleaded gasoline (Petrol) for motor vehicles.
14 5,000
3. GYS 264: 2005 Specification for the storage, handling and transportation of LPG cylinders.
7 4,000
4. GYS 453: 2008
Specification for the storage, handling and transport of steel compressed gas cylinders.
7 4,000
5. GYS 512: 2016 Requirements for the transportation of petroleum and petroleum products by road tanker wagons.
7 4,000
6. GYS 513: 2016 Requirements for the transportation of petroleum and petroleum products by bulk transportation carriers.
12 4,400
7. GYS 523: 2018 Specification for low pressure regulators for the use with liquefied petroleum gas (LPG).
26 6,100
8. APEA/IP: 1999 Guidance for the design, construction, modification and maintenance of petrol filling stations.
242 21,500
CATEGORY – PLASTIC & PLASTIC PRODUCTS STANDARDS (19) PAGE PRICE
1. GYS 91: 1998 ASTM D1784-81
Specification for rigid poly (vinyl chloride) for (PVC) compounds and chlorinated poly (vinyl chloride) (CPVC) compounds.
4 3,300
2. GYS 92: 2010 ASTM 3212 –07
Specification for joints for drain and sewer plastic pipes using flexible elastomeric seals.
3 3,300
3. GYS 94 :2010 ASTM D 2837 -08 (First revision)
Test method for obtaining hydrostatic design basis for thermoplastic pipe materials or pressure design basis for thermoplastic pipe products.
16 4,400
4. GYS 95: 2010 ASTM D 1598-02 1st Rev
Test method for time-to-failure of plastic pipe under Constant internal pressure.
4
4,000
5. GYS 96: 2010 ASTM D 1599- 99 (First revision)
Test method for resistance to short – time hydraulic pressure of plastic pipe, tubing and fittings.
3 4,000
6. GYS 97: 2010 ASTM D 2672-96 (1 st Rev.)
Specification for joints for IPS PVC pipe using solvent cement.
4 4,000
7. GYS 98: 2010 ASTM F 412-07/1st Rev
Terminology relating to plastic piping systems. 15 4,000
8. GYS 99: 2010 ASTM D 1785-06 (2nd Rev)
Specification for Poly (vinyl chloride) (PVC) Plastic pipe, schedules 40, 80 and 120.
11 4,400
9. GYS 100: 2010 (ASTM D 441/441 /M -02)
Specification for chlorinated poly (vinyl chloride) (CPVC) plastic pipe, schedules 40 and 80.
6 4,000
10. GYS 101: 1998 ASTM D 3139 -98
Specification for joints for plastic pressure using flexible elastomeric seals.
3 4,000
11. GYS 102: 2010 ASTM F 1057 –87
Standard practice for estimating the quality of extruded poly (vinyl chloride) (PVC) pipe by the heat reversion
7 4,000
(1st Rev) technique.
12. GYS 103: 2010 ASTM D 2152 – 95(First revision)
Test method for adequacy of fusion of extruded poly (vinyl chloride) (PVC) pipe and molded fittings by acetone immersion.
3 4,000
13. GYS 104: 2010 ASTM D 2122–98 (1st Rev)
Test method for determining dimensions of thermoplastic pipe and fittings.
5 4,000
14. GYS 105: 2010 ASTM D 2444-99 (First revision)
Test method for impact resistance of thermoplastic pipe and fittings by means of a tup (falling weight).
8 4,000
15. GYS 106: 1998 ASTM D 1600-86a
Abbreviations of terms relating to plastics. 3 4,000
16. GYS 107: 2010/ASTM D 2241 – 05/2nd Rev
Specification for poly (vinyl chloride) (PVC) pressure- rated pipe (SDR series).
8 4,400
17. GYS 185: 2010 ASTM F 442/ F442-99/1st Rev
Specification for chlorinated poly (vinyl chloride) (CPVC) plastic pipe (SDR – PR).
7 4,000
18. GYS 465: 2010 Specification for Polypropylene pipes. 37 7,700
19. GYS 491: 2010 CRS 33: 2010
Specification for polyethylene garbage bags – High density. 14 5,000
CATEGORY - POULTRY STANDARDS (7) PAGE PRICE
1. GYS 9-6: 2003 (First revision)
Specification for labelling of commodities - Part 6: Labelling of animal feeds.
3 3
3,300
2. GYS 58: 2006 Second revision
Specification for poultry feed and feed ingredients. 42 6,100
3. GYS 210: 2017 CRS 28: 2012 First Revision
Specification for poultry and poultry products.
20
7,500
4. GYS 260: 2004 Specification for an abattoir. 17 5,500
5. GYS 273: 2006 CCS 0052: 2005
Grading requirements for table eggs. 22 6,100
6. GCP 13: 2005
(First revision)
Code of Practice for poultry processing. 16 5,000
7. GCP 27: 2008 Code of Practice for the operation of poultry hatcheries. 18 5,500
CATEGORY – PRODUCT CERTIFICATION SCHEME STANDARDS (3) PRICE PRICE
1. GYS 50: 2010 CRS 17: 2010 (2ND Revision)
Specification for gold articles. 16 5,000
2. GYS 99: 2010 ASTM D 1785-06 (2nd Rev.)
Specification for Poly (vinyl chloride) (PVC) Plastic pipe, schedules 40, 80 and 120.
11 4,400
3. GYS 107: 2010 ASTM D 2241 – 05/2ND Revision
Specification for poly (vinyl chloride) (PVC) pressure- rated pipe (SDR series).
8 4,400
CATEGORY – SAFETY STANDARDS (9) PAGE PRICE
1. GYS 9 -17: 2004
Specification for labelling of commodities – Part 17: Labelling of protective helmets for road users.
6 4,000
2. GYS 57: 1997 ISO 6309:1987
Fire protection – Safety signs.
8 4,000
3. GYS 203: 2001 Code of safety for mercury. 6 4,000
4. GYS 208: 2002 Specification for accident prevention tags. 16 5,000
5. GYS 220: 2003 Specification for ergonomic principles in the design of work systems. 22 6,100
6. GYS 222: 2003 Safety conditions in industry. 31 6,600
7. GYS 234: 2 003 Specification for safety of toys and playthings. 30 7,200
8. GYS 259: 2018 ISO 45001: 2018/FR
Occupational Health and Safety Management Systems – Requirements with guidance for use.
56 8,300
9. GCP 19: 2004 Code of Practice on Occupational, Safety and Health Audit. 35 7,200
CATEGORY – SOAP, DETERGENTS AND CLEANING AGENTS
STANDARDS (4)
PAGE PRICE
1. GYS 21: 1995 Specification for toilet soap. 5 4,000
2. GYS 22: 1995 Specification for hard laundry soap. 4 3,300
3. GYS 23: 2005 Specification for synthetic laundry detergent powder. 15 4,000
4. GYS 172: 1998 Specification for paper products for personal cleansing.
22 6,100
CATEGORY – SPORTS STANDARDS (2)
PAGE Cost ($)
1.
GCP 35: 2016
ASTM F 2801-11(2015)
Code of Practice for paintball player safety briefing. 3
3,300
2. GCP 36: 2016 ASTM F 1777-12
Code of Practice for paintball field operation. 4 3,300
CATEGORY - TEXTILE AND GARMENTS STANDARDS (10) PAGE PRICE
1. GYS 9-15: 2003 Specification for labelling of commodities- Part 15: Labelling of garments.
3 3,300
2. GYS 9-16: 2003 Specification for labelling of commodities- Part 16: Labelling of textiles.
6 4,000
3. GYS 77: 1997 Specification for the care labelling of textiles. 15 5,000
4. GYS 78: 1997
Specification for the method of determining the maximum Safe ironing temperature of fabrics.
3 3,300
5. GYS 79: 1997 Specification for sizing of ladies clothing. 5 4,000
6. GYS 80: 1997 Specification for sizing of gent’s clothing. 5 4,000
7. GYS 81: 1997 Specification for sizing of children’s clothing. 7 4,000
8. GYS 173:1998 Glossary of terms relating to textiles and clothing. 25 6,100
9. GYS 174: 1998
Methods of test for the determination of dimensional change in washing and drying of textiles.
11 4,400
10. GYS 515: 2016 Specification for textile and related products. 6 4,000
CATEGORY – TOBACCO PRODUCTS STANDARDS (3) PAGE Cost ($)
1. GYS 9-3: 2004 (First Revision)
Specification for labelling of commodities – Part 3: Labelling of retail packages of cigarettes.
5 4,000
2. GYS 9 – 3: 2009 Second Revision
Specification for the labelling of retail packages of tobacco products.
23 6,100
3. GYS 511: 2013 CRS 26: 2013
Labelling of tobacco products 31 7,200
3rd Revision of 9-3
CATEGORY - TOURISM STANDARDS (4) PAGE PRICE
1. GCP 15: 2003
Code of Practice for assessment, licensing, registration, classification and grading of the accommodation sector.
40 7,700
2. GCP 17: 2003 Code of Practice for quality management in the restaurant service. 34 7,200
3. GCP 18: 2003 Code of Practice for tour operators and tour guides. 16 5,000
4. GYS 514: 2016 Requirements for bed and breakfast facilities. 6 4,000
CATEGORY – TRADE STANDARDS(32) PAGE PRICE
1. GYS 9-1: 1994 Specification for labelling of commodities – Part 1: General Principles.
3 3,300
2. GYS 9-2: 1994 Specification for labelling of commodities – Part 2: Labelling of prepackages goods.
11 4,400
3. GYS 9-9: 2013 CRS 5: 2010
Specification for labelling of pre-packaged foods. 28 6,600
4. GYS 9-11: 2002 Specification for labelling of commodities – Part 11: Labelling of
brewery products (beer, stout, shandy and malta).
6 4,000
5. GYS 12: 2013 CRS 1: 2010/1st Rev
Specification for packaged water. 14 5,000
6. GYS 15: 1995 Specification for powdered (icing) sugar. 4 3,300
7. GYS 17: 2004
(First revision)
Specification for brown sugar. 4 3,300
8. GYS 19: 2003
(First revision)
Specification for vinegar.
6
4,000
9. GYS 29: 1995 Specification for curry powder. 5 4,000
10. GYS 33: 2003
(First revision)
Specification for wheat flour.
9 4,400
11. GYS 34: 2003
(First revision)
Specification for biscuits.
15 5,000
12. GYS 35 : 1996 Specification for shortening. 7 4,000
13. GYS 36: 1996 Specification for margarine and cooking margarine. 8 4,000
14. GYS 37: 2006
CCS 0025 : 1992
Specification for rum.
20 5,500
15. GYS 38: 2001 First Revision
Specification for jams ( fruits preserves) and jellies 25 6,100
16. GYS 53: 2016 Specification for salted fish and dried salted fish. 23 6,100
17. GYS 54: 1996 Specification for coconut oil. 7 4,000
18. GYS 189: 2010 Specification for toilet tissue. 15 5,000
19. GYS 192: 2000 Specification for bread and rolls. 39 7,700
20. GYS 211: 2014
CRS 44: 2013
(First revision)
Rice – Specification. 20 5,500
21. GYS 219 : 2003 Specification for ice-cream and related products. 24 6,100
22. GYS 258: 2006
CRS 0047: 2003
Specification for brewery products. 12 4,400
(Revised 2004)
23. GYS 261: 2006
CCS 0050: 2004
Specification for carbonated beverages.
38 7,700
24. GYS 262: 2004 Specification for drinking water. 10 4,400
25. GYS 269: 2010 Specification for galvanized steel barbed wire. 5 4,000
26. GYS 324: 2010 Specification for hot-dip coated corrugated steel sheets for general purposes.
12 4,400
27. GYS 460: 2016 Specification for honey. 9 4,400
28. GYS 492: 2016 Specification for achar, amchar and kuchela. 13 5,000
29. GYS 494: 2010
CRS 27: 2010
Specification for fruit and vegetable juices and drinks, and fruit
nectars.
23 6,100
30. GYS 508: 2010 CRS 3: 2010
Specification for packaged natural coconut water 5 4,000
31. GCP 29: 2013 CRCP 1: 2010
Code of Practice for package water. 15 5,000
32. GCP 31: 2010
CRCP 7: 2010
Code of practice for the manufacture of wooden craft items. 9 4,400
CATEGORY – TYRE STANDARDS (5) PAGE PRICE
1. GYS 66: 1997 Definitions of terms used in the pneumatic tyre industry. 12 4,400
2. GYS 67: 2017 2nd Revision
Requirements for pneumatic passenger car tyres.
14
5,000
3. GYS 194: 2001/1st Rev
Specification for new pneumatic tyres for commercial highway vehicles.
23 6,100
4. GCP 4: 1999 Code of Practice for the storage of tyres, inner tubes and flaps. 4 3,300
5. GCP 11: 1999 Code of Practice for vehicle tyre and tube repairs. 5 4,000
CATEGORY – WEIGHTS AND MEASURES STANDARDS (3) PAGE Cost ($)
1.
GYS 32 : 996
Specification for liquid commercial capacity measures (metric).
7 4,000
2.
GYS 52: 1996
Metric practice guide conversion factors and procedures. 50 9,000
3.
GYS 180: 2001 (First revision)
Specification for equal arm scale (4 kg). 7 4,000
4
Metric & imperial conversion factors: for easy calculation and application.
19 500
CATEGORY – WOOD STANDARDS (7)
PAGE Cost ($)
1.
GYS 9-5: 2002 (First revision)
Specification for labelling of commodities - Part 5 : Labelling of furniture.
2 3,300
2. GYS 496: 2010
Requirement for the Guyana Legality assurance system 16 5,000
3. GYS 499: 2013 CRS 20: 2010
Specification for wooden furniture. 20 5,500
4. GCP 1: 2003 Code of Practice for the grading of hardwoods. 65
10,600
5. GCP 12: 2002 (First revision)
Code of Practice for the seasoning of hardwood lumber. 21 6,100