catalogue linear valves e 05-2007 - ac fluid · 05-2007 catalogue 55 e-2007/01/00142-0-3 high...
TRANSCRIPT
05-2007 Catalogue 55 E-2007/01/00142-0-3
High pressure valves for gas mixing, blending, fi lling and dispensing applications
Type TV17
®
WEH - New valves for gas applications
NEWNEW
Catalogue TV17
Page 2
®
SHORT INFORMATION | Types TV17
Part 1 | Introduction, product overview
TV17GE Stop valve with venting
TV17GR Stop valve with check valve
TV17GER Stop valve with venting and check valve
TV17GO Stop valve
Page 12
TV17GE
Page 14
TV17GE
Page 10
TV17GO
Page 16
TV17GR
Page 18
TV17GR
Page 20
TV17GER
Page 22
TV17GER
Page 8
TV17GO
Catalogue 55 E-2007/01/00142-0-3 | 05-2007
Page 3
®
Catalogue 55 E-2007/01/00142-0-3 | 05-2007
Part 1 | Introduction, product overview
Table of contents
INHALTSVERZEICHNIS
About us ...........................................................................................................................................................................................4
APPLICATIONS .................................................................................................................................................................................5
SYSTEM OVERVIEW TYPE TV17 ........................................................................................................................................................6
TV17GO | High pressure valve, pneumatic actuation ......................................................................................................................8
TV17GO | Technical data .................................................................................................................................................................9
TV17GO | High pressure valve, manual actuation .........................................................................................................................10
TV17GO | Technical data ...............................................................................................................................................................11
TV17GE | High pressure valve with venting, pneumatic actuation ................................................................................................12
TV17GE | Technical data ...............................................................................................................................................................13
TV17GE | High pressure valve with venting, manual actuation ....................................................................................................14
TV17GE | Technical data ...............................................................................................................................................................15
TV17GR | High pressure valve with check valve, pneumatic actuation .........................................................................................16
TV17GR | Technical data ..............................................................................................................................................................17
TV17GR | High pressure valve with check valve, manual actuation ..............................................................................................18
TV17GR | Technical data ...............................................................................................................................................................19
TV17GER | High pressure valve with venting and check valve, pneumatic actuation ...................................................................20
TV17GER | Technical data .............................................................................................................................................................21
TV17GER | High pressure valve with venting and check valve, manual actuation ........................................................................22
TV17GER | Technical data .............................................................................................................................................................23
TV17 ACCESSORIES | for all valves with pneumatic actuation .......................................................................................................24
TV17 ACCESSORIES | for all valves with manual actuation ............................................................................................................25
TV17 ACCESSORIES | Indicating elements for valves with pneumatic actuation ..........................................................................26
TV17 ACCESSORIES | Adaptors to fi t all TV17 valves ....................................................................................................................27
TV17 ACCESSORIES | Adaptors to fi t all TV17 valves ....................................................................................................................28
GENERAL INFORMATION ...............................................................................................................................................................29
TECHNICAL INFORMATION ............................................................................................................................................................30
ADDITIONAL PRODUCTS FOR GAS APPLICATIONS ........................................................................................................................31
FAX REPLY ......................................................................................................................................................................................32
Page 4
®
Catalogue 55 E-2007/01/00142-0-3 | 05-2007
Part 1 | Introduction, product overview
Innovative valves for gas producers
The TV17 is the latest in a series of innovative gas pro-ducts WEH have developed over many years.Development objectives were:
Modular designMaximising connection optionsSimplifi cation of plant assemblyCompact designHigh fl ow ratesHigh durabilityReduction of number of discreet valves in systemsSimple assemblyManual and automated options
All of these design objectives were achieved with the TV17 design.
•••••••••
Quality management
For WEH GmbH one of the uppermost company principles is quality. The latest manufacturing facilities and con-tinuous improvement processes guarantee the highest quality standards. WEH GmbH is certifi ed to ISO 9001.
Testing laboratory
Modern, unique test equipment guarantees a compre-hensive quality audit of all our products from design to manufacture.
About us
Page 5
®
Catalogue 55 E-2007/01/00142-0-3 | 05-2007
Part 1 | Introduction, product overview
Fig. 1: Construction of a mixing plant for CO2, N2 and O2 with WEHcomponents.
Fig. 2: Lateral view: twin banked valve construction
The TV17 is used in gas process plants and is suitable for fi lling, mixing and controlling all kinds of gaseous media, e.g. air, nitrogen, argon, helium, carbon dioxide, refrigerants, oxygen, nitrous oxide, hydrogen and methane (others on request).
Different fi elds of applicationCompact designHigh fl ow ratesHigh durabilityLight weight (about 5 kg)Ease of assemblyQuiet in operation
•••••••
Advantages
By integrating a check valve and venting valve into the TV17 the total number of valves in a system may be reduced and a compact assembly achieved.
In addition the TV17 valve series has compact dimensions and is low in weight, with high fl ow rates and extremely low fl ow noise.
Different types of actuation are available, e.g. by a pneumatic actuator or manual lever.
Increased functionality can be achieved with the accessory program (position sensors etc.). Alternative construction, material, nominal diameter and pressure ranges are also available.
With the TV17 WEH have simplifi ed the construction of gas process plants. By using only four valve confi gura-tions most fi lling, mixing and blending processes can be accomplished.
APPLICATIONS
Page 6
®
Catalogue 55 E-2007/01/00142-0-3 | 05-2007
Part 2 | Introduction, product overview
Accessory:
Various pipe work adaptors are available,
see under accessories on page 27
Accessory: Proximity switch, electrical
(Namur), page 26
Accessory: Output signal indicator, manual,
page 26
Accessory: Flow restrictor, manual,
page 26
TV17 with pneumatic actuation
TV17 with manual actuation
Further options and accessories
- alternative materials are possible, e.g. Monel
- alternative sealing materials, depending on media, are possible.
- other nominal diameters
- alternative valve actuators
Overview valves / options
SYSTEM OVERVIEW TYPE TV17
Part 2 | Introduction, Product overview
FunctionThe type TV17GE is designed as stop valve for pressurized gases. The outlet port of the valve is vented after closing.
TV17GE High pressure valve with automatic venting
FunctionThe type TV17GR is designed as stop valve for pressurized gases. The valve prevents backfl ow of the medium at the outlet port. No mixed gas can enter the inlet port.
TV17GR High pressure valve with integrated check valve
FunctionThe type TV17GER is designed as stop valve for pressurized gases. The valve automatically vents the space between the stop valve and the check valve. No mixed gas can enter the inlet port.
TV17GER High pressure valve with automatic venting and integrated check valve
Function The type TV17GO is designed as stop valve for pressurized gases with a similar function to a two-way ball valve. The valve can be pressurized either from the inlet port or from the outlet port.
TV17GO High pressure valve
Overview - TV17 designs
®
Catalogue 55 E-2007/01/00142-0-3 | 05-2007 Page 7
Characteristics TV17GO TV17GE TV17GR TV17GER
Stop valve - close / open x x x x
Automatic venting of the outlet port A x
Automatic venting of the inlet port B x
Check valve x x
Media fl ow one-way from inlet B to outlet A x x x
Media fl ow possible in both directions (outlet A to inlet B and inlet B to outlet A) x
TV17 functionality table
Part 4 | High pressure valves
TV17GO - Symbols
The TV17GO is a stop valve, which can switch the gas fl ow OFF or ON, comparable to a two-way ball valve, but with a substantially higher durability. The compact design makes the TV17GO ideal for installation into gas process plants. The valve can be ordered normally closed or nor-mally open.
Characteristic Specifi cation
Actuation Pneumatic for automatic control e.g. via SPS
Valve function By actuation depressurized OFF or ON
Flow rate Media fl ow possible in both directions (outlet A to inlet B and inlet B to outlet A)
Automatic venting No
Check valve No
Vacuum operation Yes
Seals within media fl ow NBR, others on request
Parts within media fl ow Brass and stainless steel, others on request
PS (allowed operating pressure) 0 to 420 bar
Pilot pressure 6 to 8 bar
Features
Pressure range: 0 - 420 bar
- Valve with OFF / ON function- Actuation: pneumatic
Normally closed Normally open
Specifi cation
TV17GO | High pressure valve, pneumatic actuation
®
Catalogue 55 E-2007/01/00142-0-3 | 05-2007 Page 8 Page 8
P P
Page 9
®
Catalogue 55 E-2007/01/00142-0-3 | 05-2007
Part No.
TV17GODN
Normal
position
Inlet B
Outlet A
Pilot
pressure P1M L1 L2 D
C1-51569 8 OFF M28x1.5 external thread G1/4“ internal thread M28x1.5 external thread 183 70 60
On request 8 ON M28x1.5 external thread G1/4“ internal thread M28x1.5 external thread 183 70 60
C1-79329 12 OFF UNF 1 3/8“ - 12 external thread G1/4“ internal thread M28x1.5 external thread 210 70 65
C1-77194 12 ON UNF 1 3/8“ - 12 external thread G1/4“ internal thread M28x1.5 external thread 210 70 65
Approx. dimensions in mm
Options & Accessories
Ordering
Part 4 | High pressure valves
Side view Front view
Dimensions
The TV17GO is also available oxygen cleaned and free of oil and grease. Please indicate when ordering. Other materials and seals on request. A large variety of adapters are available, see page 24.
TV17GO | Technical data
Page 10
®
Catalogue 55 E-2007/01/00142-0-3 | 05-2007
Part 4 | High pressure valves
TV17GO - Symbol
The TV17GO is a stop valve which can switch the gas fl ow OFF or ON, comparable to a two-way ball valve, but with a substantially higher durability. The compact design makes the TV17GO ideal for installation into gas process plants.
Characteristic Specifi cation
Actuation Manual
Valve function By actuation depressurized OFF or ON
Flow rate Media fl ow possible in both directions (outlet A to inlet B and inlet B to outlet A)
Automatic venting No
Check valve No
Vacuum operation Yes
Seals within media fl ow NBR, others on request
Parts within media fl ow Brass and stainless steel, others on request
PS (allowed operating pressure) 0 to 420 bar
Pressure range: 0 - 420 bar
- Valve with OFF / ON function- Actuation: manual
Features
Specifi cation
TV17GO | High pressure valve, manual actuation
Page 11
®
Catalogue 55 E-2007/01/00142-0-3 | 05-2007
Part No. TV17GO DNInlet B
Outlet AL1 L2 D
C1-51507 8 M28x1.5 external thread 183 97 55
C1-84662 12 UNF 1 3/8“ - 12 external thread 210 97 65
Approx. dimensions in mm
Options & Accessories
Ordering
Part 4 | High pressure valves
Side view Front view
Dimensions
The TV17GO is also available oxygen cleaned free of oil and grease. Please indicate when ordering. Other materials and seals on request. A large variety of adaptors are available, see page 24.
TV17GO | Technical data
Page 12
®
Catalogue 55 E-2007/01/00142-0-3 | 05-2007
Part 4 | High pressure valves
The TV17GE is a stop valve which can switch the gas fl ow OFF or ON, comparable to a two-way ball valve, but with a substantially higher durability. The compact design makes the TV17GE ideal for installation into gas process plants. After closing the valve the line output (port B) is vented. For example it may be used to vent a fi lling line where a connector needs to be depressurized in order to disconnect. The valve can be ordered normally closed oder normally open.
Pressure range: 0 - 420 bar
- Valve with OFF / ON function- Automatic venting- Actuation: pneumatic
Characteristic Specifi cation
Actuation Pneumatic for automatic control e.g. via SPS
Valve function By actuation depressurized OFF or ON
Flow rate Media fl ow one-way from inlet B to outlet A
Automatic venting Yes
Check valve No
Vacuum operation Yes
Seals within media fl ow NBR, others on request
Parts within media fl ow Brass and stainless steel, others on request
PS (allowed operating pressure) 0 to 420 bar
Pilot pressure 6 to 8 bar
Normally closed
TV17GE - Symbols
Normally open
Features
Specifi cation
TV17GE | High pressure valve with venting, pneumatic actuation
P P
Page 13
®
Catalogue 55 E-2007/01/00142-0-3 | 05-2007
Part No.
TV17GEDN
Normal
position
Inlet B
Outlet A
Pilot
pressure P1Venting P2 M L1 L2 D
C1-51567 8 OFF M28x1.5 external thread G1/4“ internal thread G1/8“ internal thread M28x1.5 external thread 183 70 60
On request 8 ON M28x1.5 external thread G1/4“ internal thread G1/8“ internal thread M28x1.5 external thread 183 70 60
C1-75174 12 OFF UNF 1 3/8“ - 12 external thread G1/4“ internal thread G1/8“ internal thread M28x1.5 external thread 210 70 70
On request 12 ON UNF 1 3/8“ - 12 external thread G1/4“ internal thread G1/8“ internal thread M28x1.5 external thread 210 70 70
Approx. dimensions in mm
Options & Accessories
Ordering
Front view
Part 4 | High pressure valves
Dimensions
The TV17GE is also available oxygen cleaned and free of oil and grease. Please indicate when ordering. Other materials and seals on request. A large variety of adapters are available, see page 24.
TV17GE | Technical data
Side view
Page 14
®
Catalogue 55 E-2007/01/00142-0-3 | 05-2007
Part 4 | High pressure valves
TV17GE - Symbol
The TV17GE is a stop valve which can switch the gas fl ow OFF or ON, comparable to a two-way ball valve, but with a substantially higher durability. The compact design makes the TV17GE ideal for installation into gas process plants. After closing the valve the line output (port B) is vented. For example it may be used to vent a fi lling line where a connector needs to be depressurized in order to disconnect.
Pressure range: 0 - 420 bar
- Valve with OFF / ON function- Automatic venting- Actuation: manual
Characteristic Specifi cation
Actuation Manual
Valve function By actuation depressurized OFF or ON
Flow rate Media fl ow one-way from inlet B to outlet A
Automatic venting Yes
Check valve No
Vacuum operation Yes
Seals within media fl ow NBR, others on request
Parts within media fl ow Brass and stainless steel, others on request
PS (allowed operating pressure) 0 to 420 bar
Features
Specifi cation
TV17GE | High pressure valve with venting, manual actuation
HandT
Page 15
®
Catalogue 55 E-2007/01/00142-0-3 | 05-2007
Part 4 | High pressure valves
Part No. TV17GE DNInlet B
Outlet AVenting P2 L1 L2 D
C1-51566 8 M28x1.5 external thread G1/8“ internal thread 183 97 60
C1-84665 12 UNF 1 3/8“ - 12 external thread G1/8“ internal thread 210 97 70
Approx. dimensions in mm
Options & Accessories
Ordering
Front view
Dimensions
The TV17GE is also available oxygen cleaned and free of oil and grease. Please indicate when ordering. Other materials and seals on request. A large variety of adapters are available, see page 24.
TV17GE | Technical data
Side view
Page 16
®
Catalogue 55 E-2007/01/00142-0-3 | 05-2007
Part 4 | High pressure valves
TV17GR - Symbols
The TV17GR is a stop valve which can switch the gas fl ow OFF or ON, comparable to a two-way ball valve, but with a substantially higher durability. The compact design makes the TV17GR ideal for installation into gas process plants. The valve can either be ordered normally closed or normally open. An integrated check valve prevents reverse fl ow.
Pressure range: 0 - 420 bar
- Valve with OFF / ON function- Protection against back fl ow- Actuation: pneumatic
Characteristic Specifi cation
Actuation Pneumatic for automatic control e.g. via SPS
Valve function By actuation depressurized OFF or ON
Flow rate Media fl ow one-way from inlet B to outlet A
Automatic venting No
Check valve Yes
Vacuum operation Yes
Seals within media fl ow NBR, others on request
Parts within media fl ow Brass and stainless steel, others on request
PS (allowed operating pressure) 0 to 420 bar
Pilot pressure 6 to 8 bar
Normally closed Normally open
Features
Specifi cation
TV17GR | High pressure valve with check valve, pneumatic actuation
PP
Page 17
®
Catalogue 55 E-2007/01/00142-0-3 | 05-2007
Part No.
TV17GRDN
Normal
position
Inlet B
Outlet A
Pilot
pressure P1M L1 L2 D
C1-51570 8 OFF M28x1.5 external thread G1/4“ internal thread M28x1.5 external thread 204 70 55
On request 8 ON M28x1.5 external thread G1/4“ internal thread M28x1.5 external thread 204 70 55
C1-75165 12 OFF UNF 1 3/8“ - 12 external thread G1/4“ internal thread M28x1.5 external thread 239 70 65
On request 12 ON UNF 1 3/8“ - 12 external thread G1/4“ internal thread M28x1.5 external thread 239 70 65
Approx. dimensions in mm
Options & Accessories
Ordering
Side view Front view
Part 4 | High pressure valves
Dimensions
The TV17GE is also available oxygen cleaned and free of oil and grease. Please indicate when ordering. Other materials and seals on request. A large variety of adapters are available, see page 24.
TV17GR | Technical data
Page 18
®
Catalogue 55 E-2007/01/00142-0-3 | 05-2007
Part 4 | High pressure valves
TV17GR - Symbol
The TV17GR is a manual stop valve which can switch the gas fl ow OFF or ON, comparable to a two-way ball valve, but with a substantially higher durability. The compact design makes the TV17GR ideal for installation into gas process plants. A integrated check valve prevents reverse fl ow.
Pressure range: 0 - 420 bar
- Valve with OFF / ON function- Protection against back fl ow- Actuation: manual
Characteristic Specifi cation
Actuation Manual
Valve function By actuation depressurized OFF or ON
Flow rate Media fl ow one-way from inlet B to outlet A
Automatic venting No
Check valve Yes
Vacuum operation Yes
Seals within media fl ow NBR, others on request
Parts within media fl ow Brass and stainless steel, others on request
PS (allowed operating pressure) 0 to 420 bar
Features
Specifi cation
TV17GR | High pressure valve with check valve, manual actuation
Page 19
®
Catalogue 55 E-2007/01/00142-0-3 | 05-2007
Part 4 | High pressure valves
Part No. TV17GR DNInlet B
Outlet AL1 L2 D
C1-51558 8 M28x1.5 external thread 204 97 55
C1-84716 12 UNF 1 3/8“ - 12 external thread 239 97 65
Approx. dimensions in mm
Options & Accessories
Ordering
Side view Front view
Dimensions
The TV17GE is also available oxygen cleaned and free of oil and grease. Please indicate when ordering. Other materials and seals on request. A large variety of adapters are available, see page 24.
TV17GR | Technical data
Page 20
®
Catalogue 55 E-2007/01/00142-0-3 | 05-2007
Part 4 | High pressure valves
TV17GER - Symbols
The TV17GER is a stop valve which can switch the gas fl ow OFF or ON, comparable to a two-way ball valve, but with a substantially higher durability. The compact design makes the TV17GER ideal for installation into gas process plants. The valve can be ordered normally closed or nor-mally open. The TV17GER also prevents creeping reverse fl ow by venting the space between the valve seat and the check valve.
Pressure range: 0 - 420 bar
- Valve with OFF / ON function - Automatic venting- Protection against back fl ow- Actuation: pneumatic
Characteristic Specifi cation
Actuation Pneumatic for automatic control e.g. via SPS
Valve function By actuation depressurized OFF or ON
Flow rate Media fl ow one-way from inlet B to outlet A
Automatic venting Yes
Check valve Yes
Vacuum operation Yes
Seals within media fl ow NBR, others on request
Parts within media fl ow Brass and stainless steel, others on request
PS (allowed operating pressure) 0 to 420 bar
Pilot pressure 6 to 8 bar
Normally closed Normally open
Features
Specifi cation
TV17GER | High pressure valve with venting and check valve, pneumatic actuation
P P
Page 21
®
Catalogue 55 E-2007/01/00142-0-3 | 05-2007
Part No.
TV17GERDN
Normal
position
Inlet B
Outlet A
Pilot
pressure P1Venting P2 M L1 L2 D
C1-51568 8 OFF M28x1.5 external thread G1/4“ internal thread G1/8“ internal thread M28x1.5 external thread 204 70 60
On request 8 ON M28x1.5 external thread G1/4“ internal thread G1/8“ internal thread M28x1.5 external thread 204 70 60
C1-74899 12 OFF UNF 1 3/8“ - 12 external thread G1/4“ internal thread G1/8“ internal thread M28x1.5 external thread 239 70 70
On request 12 ON UNF 1 3/8“ - 12 external thread G1/4“ internal thread G1/8“ internal thread M28x1.5 external thread 239 70 70
Approx. dimensions in mm
Ordering
Side view Front view
Part 4 | High pressure valves
Dimensions
TV17GER | Technical data
Options & Accessories
The TV17GER is also available oxygen cleaned and free of oil and grease. Please indicate when ordering. Other materials and seals on request. A large variety of adapters are available, see page 24.
Page 22
®
Catalogue 55 E-2007/01/00142-0-3 | 05-2007
Part 4 | High pressure valves
TV17GER - Symbol
The TV17GER is a manual stop valve which can switch the gas fl ow OFF or ON, comparable to a two-way ball valve, but with a substantially higher durability. The compact design makes the TV17GER ideal for installation into gas process plants. The valve can be ordered normally closed or normally open. The TV17GER also prevents creeping reverse fl ow by venting the space between the valve seat and the check valve.
Pressure range: 0 - 420 bar
- Valve with OFF / ON function - Automatic venting- Protection against back fl ow- Actuation: manual
Characteristic Specifi cation
Actuation Manual
Valve function By actuation depressurized OFF or ON
Flow rate Media fl ow one-way from inlet B to outlet A
Automatic venting Yes
Check valve Yes
Vacuum operation Yes
Seals within media fl ow NBR, others on request
Parts within media fl ow Brass and stainless steel, others on request
PS (allowed operating pressure) 0 to 420 bar
Features
Specifi cation
TV17GER | High pressure valve with venting and check valve, manual actuation
HandT
Page 23
®
Catalogue 55 E-2007/01/00142-0-3 | 05-2007
Part 4 | High pressure valves
Part No. TV17GER DNInlet B
Outlet AVenting P2 L1 L2 D
C1-51564 8 M28x1.5 external thread G1/8“ internal thread 204 97 60
C1-84664 12 UNF 1 3/8“ - 12 external thread G1/8“ internal thread 239 97 70
Approx. dimensions in mm
Options & Accessories
Ordering
Side view Front view
Dimensions
The TV17GE is also available oxygen cleaned and free of oil and grease. Please indicate when ordering. Other materials and seals on request. A large variety of adapters are available, see page 24.
TV17GER | Technical data
Page 24
®
Catalogue 55 E-2007/01/00142-0-3 | 05-2007
Part 5| Accessories High pressure valves
ACCESSORIES | for pneumatic actuation
Accessory: Proximity switch, electrical
(Namur)
Accessory: Output signal indicator, manual
Accessory: Flow restrictor, manual
Accessory: Swivel adaptor,
on request
Accessory: Adaptor
Accessory: Throttle check valve,
on request
TV17 ACCESSORIES
Page 25
®
Catalogue 55 E-2007/01/00142-0-3 | 05-2007
Part 5| Accessories High pressure valves
ACCESSORIES | for manual actuation
Accessory: Swivel adaptor,
on request
Accessory: Adaptor
TV17 ACCESSORIES
Page 26
®
Catalogue 55 E-2007/01/00142-0-3 | 05-2007
Part 5| Accessories High pressure valves
TV17 ACCESSORIES | Indicating elements
OVERVIEW | Indicating elements
Specifi cation Part No.
Manual indication of valve position C1-76590
Output signal indicator
FIg. 1: Indicating elements
Proximity switch
Specifi cation Part No.
Valve position electrically transmittable C1-76878
Flow restrictor, manual
Specifi cation Part No.
Restriction of the valve opening stroke C1-83559
As an option the pneumatic actuator may be equipped with a manual output signal indicator. A pin indicates if the valve is opened or closed.- Pin is not visible = valve is closed - Pin is visible = valve is open
As an option a ‘Namur‘ proximity switch can be used to transmit the valve position. This is a common requirement in automated process plants.
As an option a manual fl ow restrictor may be fi tted. This limits the stroke of the actuator and hence the gas fl ow rate.
Page 27
®
Catalogue 55 E-2007/01/00142-0-3 | 05-2007
Part 5| Accessories High pressure valves
TV17 ACCESSORIES | Adaptors
OVERVIEW | Adaptors
For connections to other components WEH can offer an extensive range of adaptors. These adaptors simplify valve, hose, pipework and sensor installation.
DN
(mm)Bore Port A inlet B
L1
(mm)
L2
(mm)A/F Part No.
8 3 M20x1.5 external thread M28x1.5 internal thread 55.5 10.5 18 C1-84453
12 3 M24x2.0 external thread UNF 1 3/8“ - 12 internal thread 59.5 14.5 22 C1-76167
Adaptors | with plain-o-ring
Fig. 1: Adaptors
Adaptors | with plain-o-ring
DN
(mm)Bore Port A inlet B
L1
(mm)
L2
(mm)A/F Part No.
8 8 M20x1.5 external thread M28x1.5 internal thread 84.5 10.5 18 C1-84458
12 12 M24x2.0 external thread UNF 1 3/8“ - 12 internal thread 88.5 14.5 22 C1-75271
8 8 M20x1.5 external thread M28x1.5 internal thread 55.5 10.5 18 C1-84463
12 12 M24x2.0 external thread UNF 1 3/8“ - 12 internal thread 59.5 14.5 22 C1-75266
DN
(mm)Bore Port A inlet B
L1
(mm)
L2
(mm)A/F Part No.
8 8 M20x1.5 external thread M28x1.5 internal thread 50.5 10.5 18 C1-84474
12 12 M24x1.5 24° external thread
UNF 1 3/8“ - 12 internal thread 54.5 14.5 22 C1-75267
Adaptors | Ermeto ø 12
Page 28
®
Catalogue 55 E-2007/01/00142-0-3 | 05-2007
Part 5| Accessories High pressure valves
Adaptors | with tube fi tting
DN
(mm)Port A inlet B
L1
(mm)
L2
(mm)A/F Part No.
12 G3/8“ internal thread
UNF 1 3/8“ - 12 internal thread 54.5 14.5 21 C1-78440
Adaptors | with plain-o-ring
DN
(mm)Port A inlet B
L1
(mm)
L2
(mm)A/F Part No.
8 Tube Ø 12 UNF 3/4“ - 20 internal thread 60 10.5 18 C1-84478
12 Tube Ø 16 UNF 1 3/8“ - 12 internal thread 64.6 14.5 22 C1-75940
Adaptors | with plain-o-ring
DN
(mm)Port A inlet B
L1
(mm)
L2
(mm)A/F Part No.
8 G1/4“ internal thread
M28x1.5 internal thread 35.5 10.5 18 C1-51571
12 G1/4“ internal thread
UNF 1 3/8“ - 12 internal thread 53.5 14.5 22 C1-76974
TV17 ACCESSORY | Adaptors to fi t all TV17 valves
Page 29
®
Catalogue 55 E-2007/01/00142-0-3 | 05-2007
Maximum care has been taken compiling this catalogue based on many years of experience. However we must point out, that all catalogue data is only valid, if it was expressly confi rmed in the individual order. We cannot guarantee the veracity of the data and the introductions in individual cases due to the large variety of applications for WEH products, and the unknown parameters and conditions of use. We have to refer to the individual order.The limits of use for pressure, temperature etc. in this catalogue are theoretical data calculated on the ba-sis of tests. Because of different operating conditions we cannot guarantee that the data do accord with the special use of the client. It has to be considered, that in the practical use interactive interferences of data parameters can cause the change of the maximum values. Especially if the operating conditions are extreme, the WEH company must be consulted before the use of the products.Therefore the requested values should be stated in the individual order, especially for extreme operating conditions. Furthermore we point out, that we cannot guarantee for misprints, uncompleted data or misinterpretation. The illustration of the products is for demonstration only.The exact form and design of the product is only defi ned by the individual order. The brochure is only an inte-gral part of the contract, if it is agreed expressly. Dimensions and other technical data in this catalogue are without obligation.
By the transfer of an up to date brochure or document all precursory versions will run out of validity. As a matter of principle the latest up to date version of brochures and other documents are valid. These versions are available from the WEH company.Our general terms and conditions are valid for consignments and all other services, unless otherwise agreed. We do not accept general terms and conditions of the purchaser.
Notice
Part 6 | General information
Copyright © All rights are reserved, WEH GmbH 2007.Unauthorized copies are strictly forbidden as well as the publishing and using without the written consent of the WEH company.WEH® is a registered trademark of the WEH GmbH Precision Connectors.
GENERAL INFORMATION
Page 30
®
Catalogue 55 E-2007/01/00142-0-3 | 05-2007
Symbols Description / Explanation
TV17GO pneumatic actuation - Normally closed
TV17GO pneumatic actuation - Normally open
TV17GO manually operated
TV17GE pneumatic actuation - Normally closed
TV17GE pneumatic actuation - Normally open
TV17GE manually operated
TV17GR pneumatic actuation - Normally closed
TV17GR pneumatic actuation - Normally open
TV17GR manually operated
TV17GER pneumatic actuation - Normally closed
TV17GER pneumatic actuation - Normally open
TV17GER manually operated
Symbols
Part 6 | General technical information
TECHNICAL INFORMATION
P
HandT
P
P
HandT
P
P
P
P
P
Page 31
®
Catalogue 55 E-2007/01/00142-0-3 | 05-2007
Radial fi lling rig for small gas cylinders Linear fi lling rig for small gas cylinders
Type TW54/57 200 bar
fi lling gas cylinders, for internal or external threads
Type TW52
fi lling CO2
Type TW17
testing gas cylinders with internal threads
Type TW117
testing, fi lling and emptying gas cylinders with water
Systems Mixing plant type TMG10
Part 7 | Other information
FURTHER PRODUCTS OF THE GAS INDUSTRY
Page 32
®
Catalogue 55 E-2007/01/00142-0-3 | 05-2007
Part 7 | Miscellaneous
Position
Department
Phone
Fax
Name
Company
Address
Postcode/City
Country
We are manufacturers of:
Yes, I want to have more details
Catalogue TS200/TS250
(Radial Filling Rigs for small gas cylinders)
Catalogue 20
(Connectors for the gas industry)
Catalogue 45
(High-Performance check valves TVR2)
Documentation
Please contact us
Visit
Remarks
Manufacturer:WEH GmbHSiemensstraße 589257 IllertissenGERMANYPhone.: +49 7303 9609-0Fax: +49 7303 9609-9999eMail: [email protected]://www.weh.com
FAX REPLY
-FüllständeTyp TS200 und TS250
Typ TS200/TS250
Stand 9/99
Radiale Kleinflaschenfüllstände
Für alle Fälle – WEH Füllstände
EQ ZERTZE
R T IF IZ IE R T
EN ISO 9OO1DIN EN ISO 9OO1
ISO 9OO1
20
-Adapter für die Gasindustrie
Katalog 20 / Stand 06/00
GAS
FüllenPrüfenund mehr ...
Zur Sicherheit – WEH
EQ ZERTZE
R T IF IZ IE R T
EN ISO 9OO1DIN EN ISO 9OO1
ISO 9OO1