catalogue - superpipe.co.zasuperpipe.co.za/downloads/catalogen.pdf · at/2002-02-1258 001/002865...
TRANSCRIPT
CATALOGUE
Metzerplas
SP A revolution in home plumbing. SP pipes are constructed of 5 layers:2 layers of cross-linked polyethylene, surrounding a central layer ofaluminum, bonded together by 2 adhesive layers. The result is a strong,lightweight pipe, which is flexible, sturdy, economical and easy to install.
Company ProfileMetzerplas is privately owned by Kibbutz Metzer, located in Israel’s central district.
Metzerplas was established in 1970, and since has accumulated profound expertise
and know-how in development, design, production, marketing and installation of
agricultural and landscaping products and turn-key irrigation projects.
Metzerplas products and systems are real-life tested and proven in the Kibbutz fields,
enabling complete examination of its innovative, leading state of the art products,
based on its experience and attending to regions with scarce and low quality water
resources, benefiting its customers with its industrious solutions.
Major ActivitiesDesign, development and production of more advanced irrigation products: a large
variety of dripper lateral lines — to fit specific requirements, new and innovative
fixtures enabling a myriad of dedicated applications.
Versed in both production and actual application of these products, we are attentive
and sensitive to the requirements and requests of the dripper lines manufacturers
of the technology.
Main ProductsHigh speed production lines for both cylindrical and flat emitters; compensated and
non-compensated drippers; irrigation systems and drip laterals; PE pipes and fittings
for agriculture, electricity, & industry; SP piping designed for hot and cold water at
high temperatures and pressures.
International StandardsMetzerplas was granted and maintains the ISO 9002 certificate since 1997. Metzerplas
production and service operate under strict ISO 900∫±2000 Standards.
SubsidiariesMetzerplas Irrigation - 100% ownership†—†Markets in ArgentinaÆ
Agrometzer - 34%†partnership†—†Produces and markets in Spain.
Dura-Line (Israel) - 6.66% partnership†—†Produces and markets
telecommunication tubes and conduits in Israel.
Metzerplas Australia Pty. Ltd. - 100% ownership - Markets in Australia
4 Press Fittings System 5 The Ideal Combination 8 Press Tools 10 Tools
12 Threaded Fitting System 14 Special Fittings 24 SP Around the world
A B O U T U S
Outer layer of crossed-linked polyethyleneAdhesive layer
Central layer of aluminumAdhesive layer
Inner layer of crossed-linked polyethylene
The Ideal CombinationThe advantage of SP is a successful combination of metal
and plastic , together in one pipe. It is completely corrosion
and scale resistant, both internally and externally. SP is
manufactured in outer diameters of: 14, 16,18, 20, 25, 32
mm. in standard roll lengths of 50 and 100 meters. SP is
color - coded: orange, blue, white and black for different
uses and easy identification. It can be used in a wide variety
of installations and can be simply and easily bent by hand.
SP pipes are acoustically and thermally insulated, can be
located quickly by metal detectors and can be easily attached
to any existing system.
A R E V O L U T I O N
C E R T I F I C A T I O N3
SP pipe is approved by standardsinstitutes around the world
Institute Certificate No. Product Standard Country
IAPMO
EME
TIN
AENOR
POCCHH
POCC
SKZ
KIWA
KIWA
KIWA
KIWA
KIWA
KOMO
SII
SII
SII
IQNet
CISQ
4755
A-927/1993
AT/2002-02-1258
001/002865
77.06.49311.31377.10.2
184875
A254
K40651/01
K40663/01
K20921/01
K20920/01
K20924/01
K20922/01
26869
7600
29570
9782
890
Pex-Al-Pex Composite pressure pipe system
Pex-Al-Pex Drinking water approval
Pex-Al-Pex
Pex-Al-Pex Pipes for hot and cold water pressure system
Pex-Al-Pex Pipe drinking water approval
Pex-Al-Pex Composite pipe system
Pex-Al-Pex Pipes
Pex-Al-Pex Pipes for transport of gas
Pex-Al-Pex System for transport of gas
Pex-Al-Pex System for hot and cold drinking water
Pex-Al-Pex Pipes for hot and cold drinking water
Metal fittings for SP system
Pex-Al-Pex Pipes drinking water approval
Compression fittings with compression sleeve
Pex-Al-Pex Pipes for hot and cold water supply
ISO 9001:2000
ISO 9001
ISO 9001:2000
ASTM F1281
A-2359/2004
Dz U Nr 107, z 1998-679 - Dz U Nr. B z 2002r
UNE 53961:2002 EX
MDU OPDK
TY 2248-005-47621749-99
DIN EN 45001
BRL-K 536 - E
BRL-K 536 - E
BRL-K 536 - E
BRL-K 536 - E
BRL-K 536
BRL 5603 - BRL 5806
2242-2
2242-1
USA
Hungary
Poland
Spain
Russia
Russia
Germany
Holland
Holland
Holland
Holland
Holland
Holland
Israel
Israel
Israel
Italy
The complementary fittings for SP Pipingsuit every method of installation, andfacilitate connection to every standardscrew threading. The fittings enable youto carry out a quick and easy installation,while ensuring that your pipes arehermetically sealed. In order to securethe manufacturers' product guarantee,only those fittings approved by theMetzerplas factory should be used duringthe installation process.
I N S T A L L A T I O N4
Chain method
Threaded fittings installed usingthe classic method
Press fittings installed usingthe classic method
SP piping systems are suited to serve manypurposes in the industrial field, domesticheating and the supply of hot and coldwater for home uses.The SP system for home water supply isvery reliable and installation is fast andsimple. The installation is done in straightlines for quick and easy maintenance anda minimal quantity of piping is required.Together resulting in an economical andenergy saving system.
I N S T A L L A T I O N5
Home water supplyBathroom and shower. This simply designed systemprovides for the effective installation of a large numberof plumping fixtures. Requires minimal piping in walls.
Heating RadiatorsDomestic heating with radiators. Operated from aclosed-circuit hot water source.
Under FloorDomestic floor heating network of SP pipes operatedfrom a closed-circuit hot water source.
T E C H N I C A L D A T A6
Flow RatesL/H
100200300400500600700800900
100011001200130014001500160017001800190020002100220023002400250026002700280029003000
J 0/00
16x2
113673
121179247324410504607
0.250.490.740.981.231.471.721.972.212.46
Speedm/sec
J 0/00
20x2
466382
104128154183213254279315353393434478
0.690.830.971.111.241.381.521.661.801.942.072.212.352.492.63
Speedm/sec
J 0/00
25x2.5
2836445363748596
109122136150165181197214231249268287306327348370
0.620.710.800.880.971.061.151.241.331.421.501.591.681.771.861.952.032.122.212.302.392.482.502.65
Speedm/sec
J 0/00
32x3
1315182124283135394347525761667277828894
100106
0.470.520.580.630.680.730.790.840.890.940.991.051.101.151.201.261.311.361.411.471.521.57
Speedm/sec
0.5 m/sec
1.0 m/sec
1.5 m/sec
2.0 m/sec
±∂“≤Æ∞
≤∞“≤Æ∞
≤µ“≤Ƶ
≤µ“≥Æ∞
100 1000 10000Q (L/H)
Pres
sure
loss
es o
f sp
pip
es -
%
1
10
100
1000
Pressure Losses of 100 m - SP pipes
At a water temperature of 40˚CUnitary pressure losses of SP pipes
Long-term Durability
105
50 Years104103102101100101
SP
PB
PEX
HDPE
PP
0.50.60.70.80.91.0
2.0
3.0
4.0
5.06.07.0
9.08.0
10.
20.0
Pres
sure
30.0
Time
7
0.45 W/m*k
16
1/2”
16x2
0.110
200
100
–
0.113
95
10
0.0004
0.000
80
20
0.50
20
3/4”
20x2
0.145
100
50
–
0.201
95
10
0.0004
0.000
100
25
1”
25x2.5
0.210
100
50
5
0.314
95
10
0.0004
0.000
125
32
11/4”
32x3
0.340
50
5
0.530
95
8
0.0004
0.000
160
30
0.75
60
1.50
70
1.75
80
2.00
90
2.25
100
2.50
0.25 mm/meter to 10˚C
Dt*k
mm/M
∆T=100˚CL0=1000mm
T E C H N I C A L D A T A
Unitary pressure losses of SP pipesmm
Inch
mm
kg/m
m
m
l/m
C˚
bar
mm
Mg/l
mm
Nominal diameter
Size
Pipe weight
Roll Lengths
Bar length
Water capacity
Max working temperature
Max working pressure temp. 95˚C
Internal roughness
Oxygen diffusion
Radius of bend
Thermal expansion capacity
Heat capacity
Pipe expansion
in various temp.
Pex
SP Metzerplas
Copper
Iron
15 mm
2.5 mm
1.5 mm
1.0 mm
Thermal Expansion PropertiesDifferent Pipes Comparison
0.10
0.40
0.80
1.00
3.00
5.00
T e m p e r a t u r e i n S P p i p e l i n e ( C ˚ )
Length ofpipe (m)
20
0.05
0.20
0.40
0.50
1.50
2.50
30
0.07
0.30
0.60
0.75
2.25
3.75
40
0.10
0.40
0.80
1.00
3.00
5.00
50
0.12
0.50
1.00
1.25
3.75
6.25
60
0.15
0.60
1.20
1.50
4.50
7.50
70
0.17
0.70
1.40
1.75
5.25
8.75
80
0.20
0.80
1.60
2.00
6.00
10.00
90
0.22
0.90
1.80
2.25
6.75
11.25
Length changes of SP pipes at various temperatures
8T E C H N I C A L D A T A
24
16
10
To 20
From 21 - To 80
From 10 - To 95
Max. Work Pressure (bar)Water Temp. (C˚)
Pressure Table
16 x 1/2”
16 x 3/4”
18 x 1/2”
18 x 3/4”
20 x 3/4”
25 x 3/4”
25 x 1”
Tightening force (N/m)Fitting size
Nut Tightening Forces
40
50
50
60
80
100
100
Table of nut tightening forces during assembly ofinserted thread connector fittings system
16 x 2
8.30
SP pipe
Diameters of through passage sections SP press fitting
18 x 2
9.80
20 x 2
11.70
25 x 2.5
15.00
32 x 3
2.70
16 x 2
3.40
1.30
4.00
0.90
3.59
Factors of local resistance for SP press fittingsName of fittings
Angle 90
Muff
T - joint “offshoot”
T - joint “pass”
T - joint “counter current”
Water flow direction 18 x 2
2.90
1.10
3.40
0.80
3.00
20 x 2
2.60
1.00
3.10
0.70
2.80
25 x 2.5
2.40
0.90
2.80
0.70
2.50
32 x 3
2.10
0.80
2.40
0.60
2.10
Azerba i j anRuss iaUkra ineL i thuan iaBu lga r iaCzechHungaryGreeceI ta l yBe lg iumHo l landSpa inMex i coPo landI re landInd iaSouth A f r i caCh ina
SP AROUND THE WORLD9
Press FittingsA Fitting for all needsIn 1998 SP Metzerplas introduced a systemof press connection fittings that is moreefficient, economical and easier to use.SP press connectors provide a strong, secureand durable seal.The wide range of pipes, connectors andaccessories allow quick and easy installationof the piping system, inside the home andout (for plumbing, heating, compressed air,and more) and enable it’s connection toany existing system.
The hermetic solutionThe pressing sleeve is firmly clamped tothe pipe and inserted connector with theuse of a pressing device*. The addition ofthe two O-rings found on the insertedconnector, guarantee a hermetic seal forhot and cold water systems.The stainless steel sleeve protects the pipeends and increases durability, as well asimproving the pipes appearance, be it insidea wall or on any exposed installations.*Additional advantage - The pressing deviceautomatically produces the right amountof pressure needed for proper sealing.
1
2
3
4
Cut pipe
Ream pipe
Insert connector
Crimp sleeve
10
White
Blue
Green
Black
Brown
Yellow
16 mm
18 mm
20 mm
25 mm
32 mm
Gas
P R E S S F I T T I N G S Y S T E M
ConnectorsSize Cat. No. Pc. per Pack18 - 1620 - 1620 - 1825 - 1625 - 1825 - 2032 - 25
780113780115780116780118780119780120780125
12012012080808040
SP PipesSize Cat. No. Pc. per Pack
770001770005770006770009770010766001766006766009
100 / 200100 / 20050 / 10050 / 10050505050
16 x 218 x 220 x 225 x 2.532 x 3.016 x 2 - Insulated20 x 2 - Insulated25 x 2.5 - Insulated
ConnectorsSize Cat. No. Pc. per Pack16 - 1618 - 1820 - 2025 - 2532 - 32
780102780103780104780105780106
1601201206040
11
Male Thread ConnectorsSize Cat. No. Pc. per Pack16 - 1/216 - 3/418 - 1/218 - 3/420 - 1/220 - 3/425 - 3/425 - 132 - 132 - 11/4
780141780142780143780144780145780146780147780148780149780150
16012012012010010080605040
Elbows Male ThreadSize Cat. No. Pc. per Pack16 - 1/218 - 1/220 - 1/2
780241780243780245
120120100
Elbows 90˚Size Cat. No. Pc. per Pack16 - 1618 - 1820 - 2025 - 2532 - 32
780201780202780203780204780205
1201201005040
SP Swivel ConnectorsSize Cat. No. Pc. per Pack16 - 1/2 (R)16 - 3/4 (R)18 - 1/2 (R)18 - 3/4 (R)20 - 1/2 (R)20 - 3/4 (R)25 - 3/4 (R)25 - 1 (R)32 - 1 (R)
780181780182780183780184780185780186780187780188780189
1501501501201501201006060
P R E S S F I T T I N G S Y S T E M12
Flat Swivel ConnectorsSize Cat. No. Pc. per Pack16 - 1/216 - 3/418 - 1/218 - 3/420 - 1/220 - 3/425 - 3/425 - 132 - 1
780191780192780193780194780195780196780197780198780199
1501501501201501201006060
Tap ConnectorsSize Cat. No. Pc. per Pack
780611780612780613780614780615
6060605040
16 - 1/218 - 1/220 - 1/220 - 3/425 - 3/4
P R E S S F I T T I N G S Y S T E M13
Double Tap Connector 90˚Size Cat. No. Pc. per Pack16 - 1/2 - 1618 - 1/2 - 1820 - 1/2 - 20
780625780626780627
404030
Elbows Female ThreadSize Cat. No. Pc. per Pack16 - 1/218 - 1/220 - 1/220 - 3/425 - 3/432 - 1
780261780263780265780266780267780269
100100100805030
Double Tap Connectors 180˚Size Cat. No. Pc. per Pack16 - 1/2 - 1618 - 1/2 - 1820 - 1/2 - 2020 - 1/2 - 16
780621780642780623780631
50404040
Radiator ConnectorsSize Cat. No. Pc. per Pack16 - 30018 - 30016 - 16 - 30018 - 18 - 30020 - 20 - 300
780811780812780821780822780823
55555
14P R E S S F I T T I N G S Y S T E M
Reduce Tap Connector 90˚Size Cat. No. Pc. per Pack16 - 1/2 - 2020 - 1/2 - 16
780634780635
4040
Shifted Tap Connectors 180˚Size Cat. No. Pc. per Pack16 - 1/2 - 1618 - 1/2 - 1820 - 1/2 - 20
16 - 1/2 - 2020 - 1/2 - 16
780622780643780624
780636780637
404040
4040
Flanged Tap ConnectorSize Cat. No. Pc. per Pack16 - 1/218 - 1/220 - 1/2
780661780662780663
404040
4
1
2
3
15P R E S S F I T T I N G S Y S T E M
T ConnectorsSize Cat. No. Pc. per Pack16 - 16 - 1618 - 18 - 1820 - 20 - 2025 - 25 - 2532 - 32 - 3216 - 18 - 1616 - 20 - 1618 - 16 - 1618 - 16 - 1820 - 25 - 2020 - 25 - 1620 - 16 - 1620 - 18 - 1820 - 20 - 1620 - 16 - 2020 - 18 - 2025 - 18 - 2525 - 20 - 2525 - 16 - 1625 - 20 - 2025 - 16 - 2525 - 25 - 1625 - 25 - 2025 - 16 - 2025 - 20 - 1625 - 32 - 2532 - 25 - 2532 - 20 - 3232 - 25 - 3232 - 16 - 2532 - 20 - 2532 - 25 - 1632 - 25 - 2032 - 32 - 2032 - 32 - 2516 - 16 - 1/220 - 20 - 1/216 - 1/2 - 1618 - 1/2 - 1820 - 1/2 - 2018 - 1/2 - 1625 - 3/4 - 2532 - 3/4 - 2532 - 3/4 - 32
780301780302780303780304780305780317780318780343780322780329780382780345780346780365780327780328780333780334780348780350780332780368780370780381780380780355780335780339780340780384780386780388780389780374780375780421780424780411780412780413780431780414780438780415
6060603018606060604040606060606030305040303030404027271818272727271818606060606060303030
1
2
3
4
P R E S S T O O L S16
780956
780992780993780936780937780938780939780940
Battery Crimping Tool Mini Series - KCat. No.Description
Battery crimping toolIncluding Jaws 16, 20, 25 mmBatteryCharger16 mm Jaw18 mm Jaw20 mm Jaw25 mm Jaw32 mm Jaw
Size
Manual Crimping ToolCat. No.780951780901780902780903
DescriptionManual Crimping161820
780955
780941780942780943780944780945
Electric Crimping Tool Series - KDescription Cat. No.SizeElectric crimping tool
16 Pressing Jaw18 Pressing Jaw20 Pressing Jaw25 Pressing Jaw32 Pressing Jaw
- Battery + Charger
SleeveSize Cat. No. Pc. per Pack1618202532
780016780018780020780025780032
1001001005050
Cutting ToolDescription Cat. No.
770400SP Cutter
Mounting PlatesDescription Cat. No.
770212770214770215
Double 150 mmDouble 100 mmSingle
Combi ClampsSize Cat. No.
760371760373760374
162025
Pc. per Pack15
Pc. per Pack50120100
Pc. per Pack10010050
Bending SpringSize Cat. No.
770420770421770424770423770426770427770428
1618202516 - External20 - External25 - External
ReamerSize Cat. No.
760293760294760295760296760297
1618202532
Pc. per Pack1 / 501 / 401 / 401 / 301 / 20
17T O O L S
1 / 201 / 201 / 201 / 151 / 151 / 151 / 10
Wrench 25 - 32 mmDescription Cat. No.1/4-3/4 Special Wrench1/2 Special Wrench
Pc. per Pack5 / 501
770432770431
18SPECIAL F ITT INGS
Plug Stoper (m)Size Cat. No. Pc. per Pack3/41
770340770341
200100
Cap Stoper (f)Size Cat. No. Pc. per Pack1/2 770345 300
Screw for Tap ConnectorSize Cat. No. Pc. per Pack1/2 771200 5, 500
770282770283790512790513
Distributor m/f InletSize Cat. No. Pc. per Pack2 - 1/2 - 3/43 - 1/2 - 3/42 - 1/2 - 13 - 1/2 - 1
32243020
Distributor m/fSize Cat. No. Pc. per Pack
770233770234770235770220770222770221
706050504035
2 - 1/2 - 3/43 - 1/2 - 3/44 - 1/2 - 3/42 - 1/2 - 13 - 1/2 - 14 - 1/2 - 1
1
2
3
4
5
Threaded ConnectorsThe optimumcombinationFor over a decade Metzerplas’s SPthreaded fittings system hassuccessfully proven itself. The SPthreaded connectors provide acomplete system of pipes and fittingsfor installations of any commercial orhome piping system, inside and out,for plumbing, heating, compressed air,and more.These threaded connectors allow theoptimum combination of ease andfunctional efficiency, thus supplyingthe means to successfully meet all yourdifferent piping needs.
A stable sealAfter insertion of the connector intothe pipe, the threaded nut is thentightened on to the pipe end, whichproduces pressure on the connectorsleeve. This sleeve presses against thepipe, producing a sure, strong andstable seal.The connecting nut is removable,whereas the inserted connectorremains firmly placed in the pipe, andthus enables its use with other fittingswithout loss in the integrity of theconnection.
Cut pipe
Ream pipe
Attach end fitting
Tighten
Place nut andinsert connector
19
SP PipesSize Cat. No. Pc. per Pack
770001770005770006770009766001766006766009
100 / 200100 / 20050 / 10050 / 100505050
16 x 218 x 220 x 225 x 2.516 x 2 - Insulated20 x 2 - Insulated20 x 2.5 - Insulated
Inserted Connector and NutSize Cat. No. Pc. per Pack16 - 1/216 - 3/420 - 3/425 - 3/425 - 1
770042770044770036770047770049
2001201008060
Inserted Connector without NutSize Cat. No. Pc. per Pack16 - 1/216 - 3/420 - 3/425 - 1
771042771044771036771049
50 / 50050 / 30050 / 25020 / 100
Double NippleSize Cat. No. Pc. per Pack1/2 - 1/2 - Long1/2 - 1/23/4 - 3/4 - Long1 - 11/2 - 3/4
770054770051770055770053770058
16020012080160
20THREADED F ITT ING SYSTEM
BushingSize Cat. No. Pc. per Pack1/2 - 1/2(m/f)3/4 - 3/4(m/f)1 - 1(m/f)1/2(m) - 3/4(f)3/4(m) - 1 (f)3/4(m) - 1/2(f)
770061770062770063770064770065770066
200806012080200
Elbow 90˚ m/mSize Cat. No. Pc. per Pack1/23/4
770071770072
16080
Elbow 90˚ m/fSize Cat. No. Pc. per Pack1/23/4
770075770076
12080
SocketSize Cat. No. Pc. per Pack1/23/4
770081770082
160100
21THREADED F ITT ING SYSTEM
22THREADED F ITT ING SYSTEM
TeeSize Cat. No. Pc. per Pack3/4(m) - 1/2(f) - 3/4(m) 770093 60
TeeSize Cat. No. Pc. per Pack
770091770092770095
1206040
1/23/41
TeeSize Cat. No. Pc. per Pack1/2(f) - 3/4(m) - 3/4(m)3/4(m) - 3/4(m) - 3/4(f)
770094770096
6060
23THREADED F ITT ING SYSTEM
Flanged Tap ConnectorCat. No.770206
Size1/2(f) - 1/2
Pc. per Pack60
Cross Tap ConnectorCat. No.770205770207
Size1/2(f) - 1/2 - 1/2 - 1/21/2(f) - 3/4 - 1/2 - 3/4
4040
Pc. per Pack
Double Tap Connector 90˚Cat. No.770203770209
Size 1/2(f) - 1/2 - 1/2 3/4(f) -1/2 - 3/4
Pc. per Pack6050
Double Tap Connector 180˚Cat. No.770202770204770208
Size 1/2(f) - 1/2 - 1/2 1/2(f) - 1/2 - 3/4 3/4(f) -1/2 - 3/4
Pc. per Pack605050
Tap ConnectorCat. No.770200770210
Size 1/2(f) - 1/2 3/4(f) - 3/4
Pc. per Pack8050
Metzerplas
Metzer 38820, IsraelTel: (972) 4 6387012Fax: (972) 4 [email protected]