catalogo tic

Wireline Tools and Equipment CatalogA Locking MandrelsB Plug AssembliesC Packoff EquipmentD Surface EquipmentE Tool String EquipmentF BailersG Shifting ToolsH Running ToolsI Pulling ToolsJ ProngsK Testing EquipmentL Gas Lift EquipmentM MiscellaneousN BHP Instrument AccessoriesO Baker Style Tools

Prices effective June 1, 2012 unless otherwise noted

TOOLS INTERNATIONAL CORPORATION TOOLS INTERNATIONAL CORPORATION P.O. Box 52323, Lafayette, LA 70505 9298 Hwy 23 South 132 N. Bernard Road, Broussard, LA 70518 Belle Chasse, LA 70037 (337) 837-9261 FAX (337) 837-4623 (504) 394-8495 FAX (504) 392-8534 www.tools-int.com

For Sales/Service Toll-Free 24 Hours1-800-338-0308

API-14L License #14L-0010

Prices effective June 1, 2012 1-800-338-0308 A-1

A

LOCKING MANDRELS

A-2

“B” MANDREL

The Type “B” Mandrel is designed tobe used in well completions that havenot been equipped with landingnipples. It can be lowered to anydesired depth and attached to thetubing wall as a means to set safetyvalves, regulators and flow beans.The Type “B” Mandrel can only holdpressure from below.

SNOITACIFICEPS"2/11 "2/11 "2/11 "2/11 "2/11 "4/31 "4/31 "4/31 "4/31 "4/31 "2"2"2"2"2 "2/12 "2/12 "2/12 "2/12 "2/12

.D.OkcenhsiF "881.1 "881.1 "573.1 "057.1)dednapxEspilS(.D.O.xaM "307.1 "028.1 "870.2 "045.2)detcarteRspilS(.D.O.xaM "084.1 "095.1 "958.1 "003.2

.D.ImuminiM "61/9 "61/9 "61/11 "8/7daerhTmottoB 41-"8/7 41-"8/7 41-"61/31 21-"61/91

looTgninnuR 05110W14 05110W14 00210W14 00210W14

slooTgnilluP 0511BR04051CUJ04ro

0511BR04051CUJ04ro

0021BR04002CUJ04ro

0521BR04052CUJ04ro


“B” MANDRELASSEMBLY 1 1/2” 1 3/4” 2” 2 1/2”

Part Number 10BM0150 10BM0175 10BM0200 10BM0250Unit Price 1210.00 1210.00 1290.00 1355.00

COMPONENTSMandrel 10B00196 10B00196 10B00204 10B00223

654.00 654.00 696.00 753.00

Slip Carrier 10B00991 10B00332 10B01331 10B01336253.00 253.00 253.00 302.00

Band 10A01608 10A01608 10A01609 10A0161022.00 27.00 27.00 35.00

Slip (3) 10B00992 (3) 10B00988 (3) 10B01639 (3) 10B00876136.00 ea. 136.00 ea. 133.00 ea. 143.00 ea.

Upper Cup Ring 10B00195 10B00195 10B00202 10B00224147.00 147.00 159.00 182.00

Choke Cup (2) 81CC0150 (2) 81CC0163 (2) 81CC0179 (2) 81CC031319.00 ea. 19.00 ea. 19.00 ea. 24.00 ea.

Lower Cup Ring 10B00197 10B00197 10B00203 10B0022275.00 75.00 83.00 104.00

Nut 10B00198 10B00198 10B00201 10B0022095.00 95.00 104.00 115.00

O-Ring #212 #212 #217 #222.85 .85 .85 1.00

A-4

“C” LOCK

The “C” Series Lock Mandrels are no-go type locks that are designed tolocate in the “D” Series LandingNipples. The “C” Lock features a no-go ring which assures positivepositioning in the landing nipple and ashear release ratchet mechanism thatprevents lock dogs from retracting.

SNOITACIFICEPS"2"2"2"2"2 "2/12 "2/12 "2/12 "2/12 "2/12 "3"3"3"3"3

.D.OkcenhsiF "573.1 "057.1 "313.2.D.OgnikcaP "18.1 "052.2 "057.2

.D.OoGoN "958.1 "792.2 "797.2daerhTmottoB)ydobgnikcap( 41-"8/51 41-"61/511 21-"2/12

daerhTmottoB)ebutrednapxe( 81-"61/51 81-"61/31 41-"8/51

looTgninnuR 00220D14 05220D14 00320D14

slooTgnilluP 002CDJ040021BS04ro

052CDJ040521BS04ro

003CDJ040031BS04ro


“C” LOCKASSEMBLY 2” 2 1/2” 3”

Part Number 12CL0200 12CL0250 12CL0300Unit Price 1705.00 1925.00 2185.00

COMPONENTSFishneck 12B01182 12B01187 12B01211

301.00 317.00 355.00

No Go Retainer 12B01186 12B01191 12B01212263.00 290.00 328.00

No Go Ring 12B01190 12B01195 12B01213139.00 150.00 168.00

Shear Dog (2) 12B01180 (2) 12B01196 (2) 12B0121431.00 ea. 35.00 ea. 39.00 ea.

Expander Tube 12B01183 12B01189 12B01215453.00 486.00 549.00

Locking Dog (2 ) 12B01192 (3 ) 12B01197 (3) 12B0121683.00 ea. 83.00 ea. 91.00 ea.

Lock Housing 12B01184 12B01193 12B01217317.00 367.00 418.00

Packing Body 12B01188 12B01194 12B01218290.00 301.00 341.00

Ratchet Assembly 12CL1200 12CL1250 12CL1300102.00 107.00 114.00

Back Up Ring (2) 12B01206 (2) 12B01209 (2) 12B0121944.00 ea. 53.00 ea. 61.00 ea.

Packing (6) 91A01079 (6) 91A00584 (6) 91V337606.13 net ea. 7.12 net ea. 6.55 net ea.

Adapter Ring 12B01205 12B01210 12B0122044.00 53.00 61.00

A-6

“D” LOCK

The Type “D” Collar Lock Mandrel isused to land and lock in any collarrecess of API collared tubing. Thesealing element is mechanicallylocked in the set position so thatpressure differentials can be heldfrom above or below the lockingmandrel. It can be used in conjunctionwith pump through plugs, positiveplugs, safety valves, standing valves,and packoffs.

(OPTIONAL)

SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS"2"2"2"2"2 "2/12 "2/12 "2/12 "2/12 "2/12 "3"3"3"3"3

.D.IkcenhsiF "573.1 "218.1 "213.2.D.O.xaM "048.1 "182.2 "448.2

.D.ImuminiM "839. "573.1 "057.1daerhTmottoB 81-"61/51 41-"23/121 21-"8/12

looTgninnuR 00210D14 05210D14 00310D14looTgnilluP 0021SG04 0521SG04 0031SG04

noisnetxEeroC 46800A04 29800A04 39800A04


“D” LOCKASSEMBLY 2” 2 1/2” 3”

Part Number 10D00200 10D00250 10D00300Unit Price 1910.00 2120.00 3430.00


227.00 250.00 404.00

Locking Sleeve 10B00641 10B00651 10B00661128.00 137.00 209.00

Outer Sleeve 10B00642 10B00652 10B00662411.00 415.00 693.00

Collet Lock 10B00643 10B00653 10B00663288.00 316.00 521.00

Lock Mandrel 10B00644 10B00654 10B00664274.00 301.00 438.00

Dog (4) 10B00645 (4) 10B00655 (4) 10B0066594.00 ea. 94.00 ea. 143.00 ea.

O-Ring Cage 10B00646 10B00656 10B0066679.00 85.00 129.00

Element 97A00588 97A00575 97A0057188.00 88.00 153.00

Element Expander 10B00647 10B00657 10B0066792.00 113.00 175.00

Packing Mandrel 10B00648 10B00658 10B00668169.00 185.00 303.00

Spacer 13A00924 13A01282 10B0066916.00 20.00 22.00

O-Ring #218 #223 #2281.00 1.00 1.40

O-Ring (2) #219 (2) #224 (2) #2291.00 1.10 1.40

ADAPTER SUB (EXTRA)10B00649 10B00659 10B00670

159.00 180.00 193.00

A-8

“M” LOCK

The “M” Series Lock Mandrelsare selective type locks thatare designed to locate in the“W” Series Landing Nipples.The “M” Lock, run with theseries “W” Running Tool,features the ability to land inany “W” nipple of the sameseal bore in the tubing string.The “M” Series Lock Mandreluses a shear release ratchetmechanism that prevents thelock dogs from retracting whileset in the nipple.

SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS"2"2"2"2"2 "2/12 "2/12 "2/12 "2/12 "2/12

.D.OkcenhsiF "573.1 "057.1

.D.OgnikcaP "578.1 "313.2

.D.ImuminiM "8/7 "521.1

looTgninnuR 00201W14 05201W14

looTgnilluP 002CDJ04 052CDJ04


“M” LOCKASSEMBLY 2” 2 1/2”

Part Number 12M00200 12M00250Unit Price 1495.00 1640.00

COMPONENTSFishneck 12B01182 12B01187

301.00 317.00

Lock Housing 12B01181 12B01199393.00 424.00

Locking Dog (2) 12B01178 (3) 12B0119875.00 ea. 75.00 ea.

Packing Body 12B01200 12B01201263.00 274.00

Expander Tube 12B01183 12B01189453.00 486.00

Back Up Ring (2) 12B01204 (2) 12B0120839.00 ea. 48.00 ea.

Vee Packing (6) 91V31000 (6) 91V318004.46 net ea. 4.57 net ea.

Adapter Ring 12B01203 12B0120739.00 48.00

Ratchet Assembly 12CL1200 12CL1250102.00 107.00

A-10

“TICR”/ “TICRN” LOCK

The “TICR” Locking Mandrel is aselective lock that can be installed inthe “TICR” Landing Nipple. They areused in heavier weight tubing due tohigher well pressure. These lockingmandrels use keys that lock into aprofile in the landing nipple that allowit to hold pressure differential fromeither above or below. This lock canbe used in conjunction with pumpthrough plugs, positive plugs, safetyvalves, and standing valves.

The “TICRN” Locking Mandrel is the“no go” version of the usuallyselective locks. The keys have anangled shoulder on them instead ofthe square shoulder of the selectivelocks. A “no go” shoulder of anequalizing sub or a crossover submade up the the bottom of the lockmust make contact with a borerestriction in the “no go” nipple inorder to lock this mandrel in theappropriate nipple. This lockingmandrel can be used in conjunctionwith pump through plugs, positiveplugs, safety valves, bottom holechokes, and standing valves.

(OPTIONAL)

SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS"017.1 "017.1 "017.1 "017.1 "017.1 "187.1 "187.1 "187.1 "187.1 "187.1 "578.1 "578.1 "578.1 "578.1 "578.1

.D.ImuminiM "057. "578. "578..D.IkcenhsiF "260.1 "573.1 "573.1

daerhTmottoBnoitcennoC 61-"8/11 41-"8/31 41-"8/31

looTgninnuR 17110RCIT14 87110RCIT14 88110RCIT14looTgnilluP 0511SG04 0021SG04 0021SG04

"000.2 "000.2 "000.2 "000.2 "000.2 "521.2 "521.2 "521.2 "521.2 "521.2 "881.2 "881.2 "881.2 "881.2 "881.2 "313.2 "313.2 "313.2 "313.2 "313.2 "265.2 "265.2 "265.2 "265.2 "265.2 "886.3 "886.3 "886.3 "886.3 "886.3.D.ImuminiM "578. "578. "521.1 "521.1 "573.1 "573.2.D.IkcenhsiF "573.1 "573.1 "218.1 "218.1 "218.1 "521.3

daerhTmottoBnoitcennoC 41-"8/31 41-"8/31 21-"4/31 21-"4/31 BLS21-"2 BLS21-"61/13

looTgninnuR 00210RCIT14 31210RCIT14 81210RCIT14 13210RCIT14 65210RCIT14 86310RCIT14looTgnilluP 0021SG04 0021SG04 0521SG04 0521SG04 0521SG04 0041SG04

Prices effective June 1, 2012 1-800-338-0308 A-1 1

“TICR”/ “TICRN” LOCKASSEMBLY 1.710” 1.781” 1.875”

Part Number (TICR) 10TICR00171 10TICR00178 10TICR00188Part Number (TICRN) 10TICRN0171 10TICRN0178 10TICRN0188Unit Price 1470.00 1470.00 1470.00


169.00 203.00 203.00

Expander Sleeve 10B00471 10B00980 10B00758304.00 304.00 304.00

Key Retainer 10B01023 10B00977 10B00760304.00 304.00 304.00

Key Spring (3) 90A00991 (3) 90A00991 (3) 90A0099224.00 ea. 24.00 ea. 26.00 ea.

Key (3) 150.00 ea. (3) 150.00 ea. (3) 150.00 ea.

For TICR Lock 10C00753 10C00760 10C00778 For TICRN Lock 10C01662 10C01665 10C01661


Back Up Ring (2) 10A00410 (2) 10A00412 (2) 10A0040537.00 ea. 37.00 ea. 32.00 ea.

Vee Packing (8) 91V12140 (7) 91V33790 (8) 91V144006.12 net ea. 5.36 net ea. 20.39 net ea.

Adapter Ring 10A00409 10A00411 10A0040437.00 37.00 32.00

ADAPTER SUB (EXTRA)10A00507 10A00508 10A00501

181.00 167.00 114.00

API “TICR” LOCK (LICENSE #14L-0010)

******** 1.781” 1.875”10TICR00178-API 10TICR00188-API

1780.00 1780.00

A-12


Part Number (TICR) 10TICR00200 10TICR00213 10TICR00218Part Number (TICRN) 10TICRN0200 10TICRN0213 10TICRN0218Unit Price 1660.00 1660.00 1660.00


257.00 257.00 269.00


Key Retainer 10B00445 10B00771 10B00778340.00 340.00 340.00


Key (3) 204.00 ea. (3) 204.00 ea. (3) 204.00 ea.

For TICR Lock 10C00779 10C00780 10C00781 For TICRN Lock 10C01666 10C01663 10C01664




Adapter Ring 10A00437 10A00413 10A0041546.00 46.00 46.00


167.00 167.00 159.00


******** 2.125” 2.188”10TICR00213-API 10TICR00218-API

1995.00 1995.00



TICR Part Number 10TICR00231 10TICR00256 10TICR00368TICRN Part Number 10TICRN0231 10TICRN0256 10TICRN0368Unit Price 1660.00 2215.00 3585.00


269.00 355.00 491.00


Key Retainer 10B00252 10B00396 10B00802354.00 486.00 898.00


Key (3) 204.00 ea. (3) 192.00 ea. (4) 301.00 ea.

For TICR Lock 10C00225 10C00782 10B00803 For TICRN Lock 10C01667 10C00792 10C01668




Vee Packing (6) 91V43080 ******** ********8.89 net ea.

Adapter Ring 10A00520 10A00417 10A0043246.00 46.00 63.00

Viton O-Ring ******** #031 #0403.05 5.80


134.00 203.00 246.00


2.313” 2.562” ********10TICR00231-API 10TICR00256-API

1995.00 2380.00

A-14

“S”/ “T” LOCK

The Type “S” Locking Mandrel consists oftwo basic subassemblies- the lockingassembly and the locating assembly. Thelocking assembly consists of locking dogsand a set of packing that seals in thepolished seal bore of the Type “S” LandingNipple. The locating section has a set oflocating keys (seven different profilepositions available) that match with theprofile of the landing nipple. When thelocking mandrel and locator are lowered intothe proper landing nipple, the locator keyswill engage with the profile of the nipple andstop the locking mandrel from traveling downand out of the nipple. The locking dogs of thelocking section would then be in line with anupper profile of the nipple that would stopthe lock from traveling up and out of thenipple. This allows the locking mandrel towithstand a pressure differential from aboveand below. It can be used in conjunction withpump through plugs, positive plugs, standingvalves, and safety valves.

The “T” Locking Mandrel operates in thesame way as the “S” Lock and Locator. It isused in heavy wall tubing instead ofstandard weight tubing as the “S” is.

(OPTIONAL)

KCOL"T"-SNOITACIFICEPS KCOL"T"-SNOITACIFICEPS KCOL"T"-SNOITACIFICEPS KCOL"T"-SNOITACIFICEPS KCOL"T"-SNOITACIFICEPS"187.1 "187.1 "187.1 "187.1 "187.1 "881.2 "881.2 "881.2 "881.2 "881.2 "057.2 "057.2 "057.2 "057.2 "057.2

.D.OkcenhsiF "573.1 "057.1 "313.2

.D.OgnikcaP "187.1 "881.2 "057.2

.D.ImuminiM "886. "578. "005.1

daerhTmottoB 21-"8/11 21-"4/11 21-"8/71

looTgninnuR 00210J14 05210J14 00310J14

looTgnilluP 0021SR04 0521SR04 0031SR04

KCOL"S"-SNOITACIFICEPS KCOL"S"-SNOITACIFICEPS KCOL"S"-SNOITACIFICEPS KCOL"S"-SNOITACIFICEPS KCOL"S"-SNOITACIFICEPS"052.1 "052.1 "052.1 "052.1 "052.1 "005.1 "005.1 "005.1 "005.1 "005.1 "526.1 "526.1 "526.1 "526.1 "526.1 "578.1 "578.1 "578.1 "578.1 "578.1 "313.2 "313.2 "313.2 "313.2 "313.2 "578.2 "578.2 "578.2 "578.2 "578.2 "318.3 "318.3 "318.3 "318.3 "318.3

.D.OkcenhsiF "000.1 "781.1 "781.1 "573.1 "057.1 "313.2 "521.3.D.OgnikcaP "052.1 "005.1 "526.1 "578.1 "313.2 "578.2 "218.3.D.ImuminiM "864. "265. "265. "886. "578. "005.1 "052.2

daerhTmottoB 61-"61/11 41-"8/7 41-"8/7 21-"8/11 41-"23/111 21-"8/71 21-"4/32looTgninnuR 52110J14 05110J14 05110J14 00210J14 05210J14 00310J14 00410J14

looTgnilluP 5211SR040511SR04051SUJ04ro

0511SR04051SUJ04ro

0021SR04002SUJ04ro

0521SR04052SUJ04ro

0031SR04003SUJ04ro

0041SR04004SUJ04ro


“S”/ “T” LOCATOR

The Type “S” and “T” LocatorMandrels are made up to thebottom of the “S” and “T” LockingMandrels to set in Type “S” and “T”Landing Nipples. It is the positionnumber of the keys on the locatormandrel that allow the lockingmandrel to be termed selective. Bychanging the keys from oneposition to another, you may set thelocking mandrel in one of fivedifferent nipples in the tubing string.The spring loaded position keys“seek out” and locate thecorresponding position nipple andprevent the lock from traveling outof the bottom of that nipple. Oncethis is accomplished, the lockingmandrel would hold pressure frombelow while the locator mandrelwould hold pressure from above.

ROTACOL"T"-SNOITACIFICEPS ROTACOL"T"-SNOITACIFICEPS ROTACOL"T"-SNOITACIFICEPS ROTACOL"T"-SNOITACIFICEPS ROTACOL"T"-SNOITACIFICEPS"187.1 "187.1 "187.1 "187.1 "187.1 "881.2 "881.2 "881.2 "881.2 "881.2 "057.2 "057.2 "057.2 "057.2 "057.2

.D.O.xaM)detcarteRsyeK(

"817.1 "390.2 "576.2

.D.ImuminiM "46/54 "8/7 "005.1

daerhTpoT 21-"8/11 21-"4/11 21-"8/71

daerhTmottoB 41-"61/31 21-"61/91 21-"2

ROTACOL"S"-SNOITACIFICEPS ROTACOL"S"-SNOITACIFICEPS ROTACOL"S"-SNOITACIFICEPS ROTACOL"S"-SNOITACIFICEPS ROTACOL"S"-SNOITACIFICEPS"052.1 "052.1 "052.1 "052.1 "052.1 "005.1 "005.1 "005.1 "005.1 "005.1 "526.1 "526.1 "526.1 "526.1 "526.1 "578.1 "578.1 "578.1 "578.1 "578.1 "313.2 "313.2 "313.2 "313.2 "313.2 "578.2 "578.2 "578.2 "578.2 "578.2 "318.3 "318.3 "318.3 "318.3 "318.3

.D.O.xaM)detcarteRsyeK(

"171.1 "604.1 "734.1 "218.1 "302.2 "067.2 "817.3

.D.ImuminiM "23/51 "61/9 "61/9 "46/54 "578. "005.1 "052.2daerhTpoT 61-"61/11 41-"8/7 41-"8/7 21-"8/11 41-"23/111 21-"8/71 21-"4/32

daerhTmottoB 61-"4/3 41-"8/7 41-"8/7 41-"61/31 21-"61/91 21-"2 21-"8/72

A-16

“S” LOCKASSEMBLY 1.250” 1.500” 1.625” 1.875”

Part Number 10SL0125 10SL0150 10SL0175 10SL0200Unit Price 900.00 900.00 900.00 900.00

COMPONENTSPacking Section 10B01469 10B01473 10B01451 10B01479

217.00 217.00 217.00 217.00

Slip Carrier 10B01468 10B01472 10B01472 10B01478217.00 217.00 217.00 217.00

Dog (4) 10B01471 (4) 10B01475 (4) 10B01450 (4) 10B0147687.00 ea. 87.00 ea. 87.00 ea. 87.00 ea.

Running Neck 10B01470 10B01474 10B01474 10B00477239.00 239.00 239.00 239.00

Back Up Ring (2) 10A00395 (2) 10A00403 (2) 10A00399 (2) 10A0040529.00 ea. 29.00 ea. 29.00 ea. 32.00 ea.

Vee Packing (8) 91V34500 (6) 91V34700 (6) 91V34600 (8) 91V310004.53 net ea. 4.62 net ea. 4.62 net ea. 4.46 net ea.

Adapter Ring 10A00394 10A00402 10A00398 10A0040649.00 39.00 39.00 44.00

NO GO SUB (EXTRA)20N20NG20NG1125 20NG1150 20NG1175 20NG1200

159.00 168.00 182.00 143.00

API “S” LOCK (LICENSE #14L-0010)

******** ******** ******** 1.875”10SL0200-API

1085.00


“S” LOCKASSEMBLY 2.313” 2.875” 3.813”

Part Number 10SL0250 10SL0300 10SL0400Unit Price 990.00 1180.00 2275.00

COMPONENTSPacking Section 10B01327 10B01321 10B00442

324.00 424.00 663.00

Slip Carrier 10B01328 10B01316 10B00422324.00 380.00 497.00

Dog (4) 10B01326 (4) 10B01318 (6) 10B00424104.00 ea. 159.00 ea. 159.00 ea.

Running Neck 10B01325 10B01315 10B01329290.00 355.00 424.00



Adapter Ring 10A00407 10A00434 10A0043146.00 64.00 75.00

NO GO SUB (EXTRA)20NG1250 20NG1300 20NG1400

152.00 274.00 333.00

API “S” LOCK (LICENSE #14L-0010)

2.313” ******** ********10SL0250-API

1225.00

A-18

“S” LOCATORASSEMBLY 1.250” 1.500” 1.625” 1.875”

Part Number 10SL*125 10SL*150 10SL*175 10SL*200Unit Price 740.00 740.00 740.00 740.00

COMPONENTSNut 10A01467 10A01470 10A01470 10A01477

53.00 53.00 53.00 53.00

Upper Key Retainer 10B00435 (2) 10A01471 (2) 10A01471 10A00919147.00 147.00 ea. 147.00 ea. 147.00

Lower Key Retainer 10B00432 ******** ******** 10A00920147.00 147.00

Key Spring (2) 90A00917 (2) 90A00917 (2) 90A00917 (2) 90A0091837.00 ea. 37.00 ea. 37.00 ea. 37.00 ea.

Locator Mandrels 203.00 203.00 203.00 203.00

For Positions #1,2,3 10B00433 10A01472 10A01472 10B00921 For Positions #4,5,6 10B00434 10A01473 10A01473 10B00922

Position Keys (2) 191.00 ea. 191.00 ea. 191.00 ea. 191.00 ea.

Key #1 10B00436 10B01103 10B01101 10B00956 Key #2 10B00437 10B01104 10B01100 10B01080 Key #3 10B00438 10B01105 10B01099 10B01035 Key #4 10B00439 10B01102 10B01098 10B00889 Key #5 10B00440 10B01106 10B01096 10B01165 Key #6 10B00441 10B01108 10B01097 10B00890

*Replace asterisk with desired position number


“S” LOCATORASSEMBLY 2.313” 2.875” 3.813”

Part Number 10SL*250 10SL*300 10SL*400Unit Price 760.00 1045.00 2145.00

COMPONENTSNut 10A01324 10A01317 10A00860

64.00 115.00 225.00

Upper Key Retainer 10A00867 10A01319 10A00859168.00 191.00 237.00

Lower Key Retainer 10A00868 10A01320 10A00858168.00 191.00 237.00


Locator Mandrels 252.00 359.00 610.00

For Positions #1,2,3 10B00923 10B01323 10B00425 For Positions #4,5,6 10B00924 10B01322 10B00421

Position Keys (2) 212.00 ea. 239.00 ea. 543.00 ea.

Key #1 10B00866 10B00818 10B01312 Key #2 10B01039 10B00819 10B01313 Key #3 10B00896 10B00820 10B01314 Key #4 10B00828 10B00821 10B00423 Key #5 10B01480 10B00822 10B00420 Key #6 10B00891 10B00823 10B00426


A-20

“T” LOCKASSEMBLY 1.781” 2.188” 2.750”

Part Number 10TL0200 10TL0250 10TL0275Unit Price 1040.00 1165.00 1395.00

COMPONENTSPacking Section 10B01482 10B01487 10B01107

336.00 370.00 504.00

Slip Carrier 10B01483 10B01490 10B01485336.00 370.00 451.00

Dog (4) 10B01484 (4) 10B01489 (4) 10B01311110.00 ea. 180.00 ea. 182.00 ea.

Running Neck 10B00477 10B01325 10B01315239.00 290.00 355.00



Adapter Ring 10A00396 10A00392 10A0042547.00 53.00 69.00


“T” LOCATORASSEMBLY 1.781” 2.188” 2.750”

Part Number 10TL*200 10TL*250 10TL*275Unit Price 845.00 905.00 1260.00

COMPONENTSNut 10A01477 ******** 10A01488

53.00 130.00

Upper Key Retainer 10A01482 10A01484 10A01486164.00 191.00 219.00

Lower Key Retainer 10A01481 10A01483 10A01487164.00 191.00 219.00


Locator Mandrels 203.00 296.00 359.00

For Positions #1,2,3 10B00921 10B01488 10B01323 For Positions #4,5,6 10B00922 10B01491 10B01322

Position Keys (2) 228.00 ea. 260.00 ea. 288.00 ea.

Key #1 10B01190 10B01059 10B01084 Key #2 10B01191 10B01060 10B01158 Key #3 10B01192 10B01061 10B01186 Key #4 10B01193 10B01062 10B01310 Key #5 10B01194 10B01063 10B01309 Key #6 10B01195 10B01064 10B01306


A-22

“W” MANDREL

The “W” Locking Mandrel is used inwells that are not equipped withlanding nipples during completion.They are attached to the wall of thetubing and during the runningprocedure, its element is expanded toseal against the tubing wall. It canonly hold a differential pressure frombelow. It can be used in conjunctionwith pump through plugs, regulators,safety valves, and bottom holechokes.

SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS"4/11 "4/11 "4/11 "4/11 "4/11 "2/11 "2/11 "2/11 "2/11 "2/11 "4/31 "4/31 "4/31 "4/31 "4/31 "2"2"2"2"2 "2/12 "2/12 "2/12 "2/12 "2/12 "3"3"3"3"3 "4"4"4"4"4

.D.OkcenhsiF "000.1 "881.1 "881.1 "573.1 "057.1 "313.2 "521.3.D.O.xaM

)dednapxEspilS( "094.1 "307.1 "028.1 "870.2 "045.2 "570.3 "015.3

.D.O.xaM)detcarteRspilS( "042.1 "084.1 "095.1 "958.1 "003.2 "448.2 "572.3

.D.ImuminiM "23/51 "61/9 "61/9 "61/11 "198. "573.1 "057.1looTgninnuR 52110W14 05110W14 05110W14 00210W14 00210W14 00310W14 00410W14

looTgnilluP 5211BR04 0511BR04051CUJ04ro

0511BR04051CUJ04ro

0021BR04002CUJ04ro

0521BR04052CUJ04ro

0031BR04003CUJ04ro

0041BR04004CUJ04ro

niPlloR "4/1x"8/1 "4/1x"8/1 "4/1x"8/1 "8/3x"8/1 "2/1x"8/1 "2/1x"8/1 "2/1x"8/1)2(sniPraehSssarB "4/1x"8/1 "61/5x"8/1 "61/5x"8/1 "61/7x"61/3 "2/1x"61/3 "2/1x"61/3 "2/1x"61/3

daerhTmottoB 61-"4/3 41-"8/7 41-"8/7 41-"61/31 21-"61/91 21-"2 21-"8/72


“W” MANDRELASSEMBLY 1 1/4” 1 1/2” 1 3/4” 2”

Part Number 10W01125 10W01150 10W01175 10W01200Unit Price 1645.00 1645.00 1645.00 1645.00

COMPONENTSMain Mandrel 10B00340 10B00990 10B00990 10B01638

317.00 317.00 317.00 317.00

Slip Mandrel 10B00337 10B00994 10B00994 10B01332278.00 278.00 278.00 359.00

Slip Carrier 10A00339 10B00991 10B00332 10B01331253.00 253.00 253.00 253.00

Element 18DE0125 18DE0150 18DE0175 18DE0200333.00 333.00 333.00 333.00

Sleeve 10B00341 10B00336 10B00335 10B01333317.00 317.00 317.00 317.00

Inner Sleeve ******** ******** ******** 10B01330127.00

Expander 10A01330 10B00993 10B00993 10B00989248.00 248.00 248.00 248.00

Slip (3) 10B00338 (3) 10B00992 (3) 10B00988 (3) 10B01639133.00 ea. 136.00 ea. 136.00 ea. 133.00 ea.

Band 10A01606 10A01608 10A01608 10A0160927.00 27.00 27.00 27.00

O-Ring #017 #020 #020 #120.75 .85 .85 .85

A-24

“W” MANDRELASSEMBLY 2 1/2” 3”

Part Number 10W01250 10W01300Unit Price 1920.00 3020.00

COMPONENTSMain Mandrel 10B01335 10B00351

341.00 538.00

Slip Mandrel 10B00875 10B00352361.00 577.00

Slip Carrier 10B01336 10A00355302.00 474.00

Element 18DE0250 18DE0300341.00 427.00

Sleeve 10B01334 10A00356350.00 529.00

Inner Sleeve 10B01337 10A00357145.00 165.00

Expander 10B01338 10B00353290.00 458.00

Slip (3) 10B00876 (3) 10B00354143.00 ea. 196.00 ea.

Band 10A01610 10A0161135.00 58.00

O-Ring #218 #2241.00 1.10


sretrauqdaeH50507AL,etteyafaL,32325xoB.O.P

81507AL,drassuorB,.dRdranreB.N2313264-738)733(XAF1629-738)733(

moc.tni-sloot.www

sruoH42eerF-lloTecivreS/selaSroF8030-833-008-1

noisiviDessahCelleBhtuoS32.ywH8929

73007AL,essahCelleB4358-293)405(XAF5948-493)405(

A-26

“TICX”/ “TICXN” LOCK

The “TICX” Locking Mandrel operatesin the same way as the “TICR”Locking Mandrel. The “TICX” LockingMandrel is used in standard weighttubing instead of heavy weight tubingthe “TICR” Locking Mandrel is usedin.

The “TICXN” Locking Mandrel is the“no go” version of the usuallyselective locks. The keys have anangled shoulder on them instead ofthe square shoulder of the selectivelocks. A “no go” shoulder of anequalizing sub or a crossover submade up the the bottom of the lockmust make contact with a borerestriction in the “no go” nipple inorder to lock this mandrel in theappropriate nipple. This lockingmandrel can be used in conjunctionwith pump through plugs, positiveplugs, safety valves, bottom holechokes, and standing valves.

(OPTIONAL)SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS"005.1 "005.1 "005.1 "005.1 "005.1 "526.1 "526.1 "526.1 "526.1 "526.1 "578.1 "578.1 "578.1 "578.1 "578.1

.D.ImuminiM "057. "057. "000.1.D.IkcenhsiF "260.1 "260.1 "573.1

daerhTmottoBnoitcennoC 61-"8/11 61-"8/11 41-"8/31

looTgninnuR 05110XCIT14 36110XCIT14 00210XCIT14looTgnilluP 0511SG04 0511SG04 0021SG04

"313.2 "313.2 "313.2 "313.2 "313.2 "057.2 "057.2 "057.2 "057.2 "057.2 "318.2 "318.2 "318.2 "318.2 "318.2 "313.3 "313.3 "313.3 "313.3 "313.3 "318.3 "318.3 "318.3 "318.3 "318.3.D.ImuminiM "573.1 "057.1 "057.1 "521.2 "526.2.D.IkcenhsiF "218.1 "313.2 "313.2 "526.2 "521.3

daerhTmottoBnoitcennoC 21-"4/31 BLS21-"4/12 BLS21-"4/12 BLS21-"057.2 BLS21-"61/13

looTgninnuR 05210XCIT14 00310XCIT14 18210XCIT14 13310XCIT14 00410XCIT14looTgnilluP 0521SG04 0031SG04 0031SG04 0531SG04 0041SG04


“TICX”/ “TICXN” LOCKASSEMBLY 1.500” 1.625” 1.875” 2.313”

Part Number (TICX) 10TICX00150 10TICX00163 10TICX00200 10TICX00250Part Number (TICXN) 10TICXN0150 10TICXN0163 10TICXN0200 10TICXN0250Unit Price 1170.00 1135.00 1135.00 1245.00

COMPONENTSFishneck 10B00385 10B00473 10B00390 10B00859

158.00 169.00 154.00 193.00

Expander Sleeve 10B00386 10B00386 10B00388 10B00709240.00 240.00 235.00 261.00

Key Retainer 10B00383 10B00878 10B00387 10B00706240.00 235.00 235.00 250.00


Key (2) 118.00 ea. (2) 117.00 ea. (2) 117.00 ea. (2) 146.00 ea.

For TICX Lock 10B01111 10B00578 10B00579 10B00580 For TICXN Lock 10B01130 10B01129 10B01131 10B01132

Packing Mandrel 10B00384 10B00877 10B00389 10B00847244.00 235.00 235.00 319.00




ADAPTER SUB (EXTRA)10A00500 10A00511 10A00501 10A01112

118.00 117.00 114.00 137.00

API “TICX” LOCK (LICENSE #14L-0010)

******** ******** 1.875” 2.313”10TICX00200-API 10TICX00250-API

1385.00 1505.00

1.875” 9cr 2.313” 9cr10TICX00201-API 10TICX00251-API

1415.00 1650.00

A-28

“TICX”/“TICXN” LOCKASSEMBLY 2.750” 2.813” 3.313” 3.813”

Part Number (TICX) 10TICX00300 10TICX00281 10TICX00350 10TICX00400Part Number (TICXN) 10TICXN0300 10TICXN0281 10TICXN0350 10TICXN0400Unit Price 2230.00 2230.00 3090.00 2555.00


305.00 305.00 432.00 358.00

Expander Sleeve 10B00407 10B00407 10B00601 10B00400407.00 407.00 546.00 464.00

Key Retainer 10B00406 10B00416 10B00602 10B00402418.00 418.00 585.00 480.00


Key (3) 167.00 ea. (3) 167.00 ea. (3) 230.00 ea. (3) 185.00 ea.

For TICX Lock 10B00971 10B00973 10B00605 10B00405 For TICXN Lock 10B01133 10B00974 10B00606 10B01140

Packing Mandrel 10B00408 10B00408 10B00603 10B00404536.00 536.00 730.00 609.00




Flat Spring ******** ******** ******** 90A0149050.00

O-Ring #033 #033 #037 #0393.40 3.40 5.80 5.80

ADAPTER SUB (EXTRA)10A00504 10A00512 10A00513 10A00514

252.00 252.00 261.00 274.00

API “TICX” LOCK (LICENSE #14L-0010)

2.750” 2.813” ******** 3.813”10TICX00300-API 10TICX00281-API 10TICX00400-API

2240.00 2240.00 3060.00




moc.tni-sloot.www




A-30

“TICX” LOCK CHECK SET TOOL

These tools are used to insure thatthe “TICX” and “TICR” LockingMandrels have properly been set inthe appropriate landing nipple. Asheared pin in the tool, once it hasbeen run, indicates that the lock hasbeen properly set. It is lowereddownhole to the locking mandrelusing standard wireline tools.

SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS"2/11 "2/11 "2/11 "2/11 "2/11"017.1 "017.1 "017.1 "017.1 "017.1 "2"2"2"2"2

.D.OkcenhsiF "881.1 "573.1noitcennoCdaerhT 01-"61/51 01-"61/51

niPraehSssarB "4/11x"61/3 "8/51x"4/1wercSteS "4/1x02-"4/1 "4/1x02-"4/1

"521.2 "521.2 "521.2 "521.2 "521.2 "881.2 "881.2 "881.2 "881.2 "881.2 "265.2"2/12 "265.2"2/12 "265.2"2/12 "265.2"2/12 "265.2"2/12 "3"3"3"3"3 "4"4"4"4"4.D.OkcenhsiF "573.1 "573.1 "573.1 "057.1 "057.1

noitcennoCdaerhT 01-"61/51 01-"61/51 01-"61/51 01-"61/51 01-"61/11niPraehSssarB "8/51x"4/1 "8/71x"4/1 "8/71x"4/1 "2/12x"4/1 "8/33x"61/3

wercSteS "4/1x02-"4/1 "4/1x81-"61/5 "4/1x81-"61/5 "4/1x81-"61/5 "4/1x81-"61/5


“TICX” LOCK CHECK SET TOOLASSEMBLY 1 1/2”, 1.710” 2” 2.125” 2.188”

Part Number 10CHK150 10CHK200 10CHK213 10CHK218Unit Price 455.00 455.00 455.00 545.00


189.00 198.00 198.00 211.00

Shear Pin Cover 10B01262 10B01250 10B01250 10B0125453.00 53.00 53.00 60.00

Housing 10B01263 10B01252 10B01252 10B01256115.00 115.00 115.00 126.00

Core 10B01258 10B01251 10B01264 10B01260173.00 173.00 173.00 198.00

ASSEMBLY 2 1/2”, 2.562” 3” 4”Part Number 10CHK250 10CHK300 10CHK400Unit Price 545.00 630.00 920.00


211.00 247.00 355.00

Shear Pin Cover 10B01254 10B01270 10B0127560.00 65.00 91.00

Housing 10B01256 10B01271 10B01276126.00 139.00 198.00

Core 10B01255 10B01273 10B01277198.00 237.00 332.00

A-32



moc.tni-sloot.www




Prices effective June 1, 2012 1-800-338-0308 B-1

B

PLUG ASSEMBLIES

B-2

“B”/ “H” EQUALIZING SUBThe Type “B” and “H”Equalizing Subs allow anequalization of a pressuredifferential across a lockingmandrel so that the lockingmandrel can be safely andproperly retrieved. It alsoprovides a means to allowfluid to bypass around alocking mandrel as it islowered into a landingnipple. A running prong andpulling prong are needed toequalize these subs. Theprong lifts a spring loadedequalizing dart off “seat”which will alllow either fluidbypass or pressureequalizing. The Type “B” and“H” subs are identical exceptthe internal diameters of the“H” subs are larger than the“B” subs.

"B"-SNOITACIFICEPS"2"2"2"2"2 "2/12 "2/12 "2/12 "2/12 "2/12 "3"3"3"3"3

.D.O "057.1 "051.2 "526.2.D.I "135. "917. "651.1

eziSdaerhT 41-"61/31 21-"61/91 21-"2).ni.qs(aerAwolF "300. "300. "300.

"H"-SNOITACIFICEPS"2/11 "2/11 "2/11 "2/11 "2/11 "2"2"2"2"2 "2/12 "2/12 "2/12 "2/12 "2/12 "3"3"3"3"3

.D.O "814.1 "057.1 "051.2 "017.2.D.I "365. "886. "578. "05.1

eziSdaerhT 41-"8/7 41-"61/31 21-"61/91 21-"2).ni.qs(aerAwolF "300. "300. "300. "300.


“B”/ “H” EQUALIZING SUB“B”ASSEMBLY 2” 2 1/2” 3”

Part Number 20B00200 20B00250 20B00300Unit Price 270.00 305.00 505.00

COMPONENTSBody 20B01461 20B01462 20B01465

206.00 234.00 423.00

Valve Spring 90A01457 90A01457 90A0145717.00 17.00 17.00

Dart 20A00476 20A00476 20A0047636.00 36.00 36.00

Cap 20A00475 20A00475 20A0047529.00 29.00 29.00

“H”ASSEMBLY 1 1/2” 2” 2 1/2” 3”

Part Number 20H00150 20H00200 20H00250 20H00300Unit Price 270.00 270.00 305.00 505.00

COMPONENTSBody 20B01458 20B01459 20B01460 20B01463

206.00 206.00 234.00 423.00

Valve Spring 90A01457 90A01457 90A01457 90A0145717.00 17.00 17.00 17.00

Dart 20A00476 20A00476 20A00476 20A0047636.00 36.00 36.00 36.00

Cap 20A00475 20A00475 20A00475 20A0047529.00 29.00 29.00 29.00

B-4

“C” PLUG

The Type “C” Equalizing Plug is anequalizing sub that holds pressuregenerated from the bottom only. Itcan be used as a pump throughplug if needed. When used inconjunction with the Type “B”, “H”,and “F” Equalizing Subs, the upperend of the bean housing serves asa valve which seats and seals on atapered seat that is present in allType “B”, “H”, and “F” subs. Thissame tapered seat is present in the“B” and “W” Mandrels so that the“C” Plug could be used on themwithout another equalizing submade up to it. The bean has asecondary valve which sticks outabove the bean that must bepushed off seat, using anequalizing prong made up the theproper pulling tool, in order toequalize. This is accomplished byapplying tool string weight on itprior to pulling the locking mandrel.

SNOITACIFICEPS"2"2"2"2"2 "2/12 "2/12 "2/12 "2/12 "2/12 "3"3"3"3"3

noitcennoCdaerhT 41-"61/31 21-"61/91 21-"2nottuBgnizilauqEaerAwolF

).nI.qS( "5700. "5700. "5700.

niPlloR "4/3x"4/1 "8/7x"4/1 "61/71x"4/1


“C” PLUGASSEMBLY 2” 2 1/2” 3”

Part Number 21C01200 21C01250 21C01300Unit Price 385.00 440.00 495.00

COMPONENTSBean Assembly 21CB0200 21CB0250 21CB0300

215.00 240.00 310.00

Housing 21B01452 21A00457 21A01460152.00 198.00 250.00

Secondary Valve 21A00456 21A00456 21A0045646.00 46.00 46.00

Spring 90A01515 90A01515 90A0151520.00 20.00 20.00

Cage 21B01446 21B01447 21B00438143.00 159.00 178.00

Spring 90A01044 90A00895 90A0113627.00 29.00 32.00

B-6

“D” BRIDGE PLUG

The Type “D” Bridge Plug isused in conjunction with theType “D” Collar LockingMandrel to make a positiveplug that will hold pressurefrom above and below.Equalization is achieved byshearing a disc prior to thepulling process.

SNOITACIFICEPS"2"2"2"2"2 "2/12 "2/12 "2/12 "2/12 "2/12 "3"3"3"3"3

noitcennoCdaerhT 81-"61/51 41-"23/121 21-"8/12


“D” BRIDGE PLUG

ASSEMBLY 2” 2 1/2” 3”Part Number 21DB0200 21DB0250 21DB0300Unit Price 485.00 630.00 715.00

COMPONENTSCap 21B00507 21B00510 21B00513

84.00 95.00 104.00

Equalizing Mandrel 21B00508 21B00511 21B00514398.00 535.00 620.00

Shear Disc 21B00505 21B00505 21B0050513.00 13.00 13.00

Bean 21B00504 21B00504 21B0050413.00 13.00 13.00

B-8

“D” PLUG (1 1/2”, 1 3/4”)

The Type “D” Equalizing Plug is aplug that is designed to holdpressure from below. It can beused in conjunction with manylocking devices to bleed off a wellin order to perform repairs orreplacement of surface equipment.It also has pump throughcapabilities that would allow anoperator to kill a well. A pullingprong is needed to equalize thesesubs. The prong actuates asecondary valve which allowseither fluid bypass or pressureequalization.

SNOITACIFICEPS"4/31,"2/11 "4/31,"2/11 "4/31,"2/11 "4/31,"2/11 "4/31,"2/11

.D.O.xaM "052.1noitcennoCdaerhT 41-"8/7

).ni.qs(nwoDpmuPaerAwolF "941.nottuBgnizilauqEaerAwolF

).ni.qs( "300.

niPlloR "2/1x"61/1


“D” PLUGASSEMBLY 1 1/2”, 1 3/4”

Part Number 21D01150Unit Price 765.00

COMPONENTSBody 21A01605

332.00

Bottom Sub 21A0160198.00

Outer Spring 90A0150233.00

Bean Assembly 21D02150240.00

Secondary Valve 21A0160462.00

Outer Housing 21A0160379.00

Inner Housing 21A0160276.00

Inner Spring 90A0149617.00

O-ring #113.75

B-10

“D” PLUG (2”- 3”)

The Type “D” Equalizing Plug is aplug that is designed to holdpressure from below. It can beused in conjunction with manylocking devices to bleed off a wellin order to perform repairs orreplacement of surface equipment.It also has pump throughcapabilities that would allow anoperator to kill a well. A pullingprong is needed to equalize thesesubs. The prong lifts a springloaded equalizing dart off “seat”which allows either fluid bypass orpressure equalizing.

SNOITACIFICEPS"2"2"2"2"2 "2/12 "2/12 "2/12 "2/12 "2/12 "3"3"3"3"3

.D.O.xaM "057.1 "521.2 "526.2eroB.D.I "135. "917. "651.1

noitcennoCdaerhT 41-"61/31 21-"61/91 21-"2).ni.qs(nwoDpmuPaerAwolF "122. "604. "940.1

nottuBgnizilauqEaerAwolF).ni.qs( "300. "300. "300.

wercSteS "4/1x02-"4/1 "4/1x02-"4/1 "4/1x02-"4/1

Prices effective June 1, 2012 1-800-338-0308 B-1 1

“D” PLUGASSEMBLY 2” 2 1/2” 3”


COMPONENTSEqualizing Sub Assembly 21D03200 21D03250 21D03300

430.00 455.00 565.00

Body 21B01444 21B01448 21B01449355.00 382.00 471.00

Cap 20A00475 20A00475 20A0047529.00 29.00 29.00

Dart 20A00476 20A00476 20A0047636.00 36.00 36.00

Valve Spring 90A01457 90A01457 90A0145717.00 17.00 17.00

Bean Assembly 21D02200 21D02250 21D02300160.00 175.00 220.00

Body 21A01445 21A01451 21B0043774.00 84.00 110.00

Packing Adapter 21A01128 21A01449 21A0148829.00 33.00 43.00

Core 21A01129 21A01450 21B0149057.00 63.00 85.00

Hycar 97A00582 97A00894 97A0115222.00 27.00 32.00

Cage 21B01446 21B01447 21B00438143.00 159.00 214.00

Spring 90A01044 90A00895 90A0113627.00 29.00 32.00

INCONEL SPRINGS (OPTIONAL)

Spring 90N02120 90N02121 ********51.00 51.00

B-12

“PN” PLUG

The Type “PN” Plug is a positive plugused in conjunction with the Type “N”Locking Mandrel to hold pressurefrom above and below in a Type “N”Landing Nipple. This plug might beused to test tubing or to plug tubingto perform repairs or replacement ofsurface equipment. Equalization isachieved by pulling the equalizingprong from the plug assembly.

SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS"4/11 "4/11 "4/11 "4/11 "4/11 "4/31,"2/11 "4/31,"2/11 "4/31,"2/11 "4/31,"2/11 "4/31,"2/11 "2"2"2"2"2 "2/12 "2/12 "2/12 "2/12 "2/12 "3"3"3"3"3

.D.OkcenhsiF "786. "218. "00.1 "00.1 "057.1.D.O.xaM "590.1 "224.1 "05.1 "00.2 "05.2

looTgninnuR 52100P14 05100P14 00200P14 05200P14 00300P14

looTgnilluP ******** ********831CDJ0400210G25ro5211BS04ro

831CDJ0400210G25ro5211BS04ro

052CDJ040521BS04ro

).ni.qs(aerAwolFgnizilauqE "940. "051. "051. "051. "051.daerhTrewoL TPN"4/1 TPN"8/3 TPN"8/3 TPN"8/3 TPN"8/3daerhTreppU 61-"4/3 41-"8/7 4-"61/31 21-"61/91 21-"2

niPraehSssarB "8/5x"8/1 "8/7x"61/3 "8/7x"61/3 "8/7x"61/3 "8/7x"61/3


“PN” PLUGASSEMBLY 1 1/4” 1 1/2”, 1 3/4”

Part Number 21PN0125 21PN0150Unit Price 700.00 700.00

COMPONENTSCage 21A00042 21A00036

146.00 146.00

Adapter Sub 21A00043 21A00045146.00 146.00

Prong 21B00046 21B00047204.00 204.00

Fishneck 21A00041 21A01127123.00 123.00

Watermelon 21A00040 21A00044146.00 146.00

O-ring #006 #011.55 .55

O-ring #012 (2) #113.55 .75 ea.

O-ring #008 #012.55 .55

ASSEMBLY 2” 2 1/2” 3”Part Number 21PN0200 21PN0250 21PN0300Unit Price 700.00 780.00 825.00

COMPONENTSCage 21A00036 21A00036 21A00036

146.00 146.00 146.00

Adapter Sub 21A00037 21B01187 21B01466146.00 146.00 182.00

Prong 21B00043 21B00043 21B00043204.00 204.00 204.00

Fishneck 21A00455 21A00039 21B01052123.00 204.00 285.00

Watermelon 21A00038 21A00038 21A00038146.00 146.00 146.00

O-ring #011 #011 #011.55 .55 .55

O-ring (2) #113 (2) #113 (2) #113.75 ea. .75 ea. .75 ea.

O-ring #012 #012 #012.55 .55 .55

B-14

“PS” PLUG

The Type “PS” Plug is a positive plugused in conjunction with the Type “S”Locking Mandrel and Type “S”Locator to hold pressure from aboveand below in a Type “S” LandingNipple. This plug might be used totest tubing or to plug tubing toperform repairs or replacement ofsurface equipment. Equalization isachieved by pulling the equalizingprong from the plug assembly.

SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS"4/11 "4/11 "4/11 "4/11 "4/11 "4/31,"2/11 "4/31,"2/11 "4/31,"2/11 "4/31,"2/11 "4/31,"2/11 "2"2"2"2"2 "2/12 "2/12 "2/12 "2/12 "2/12 "3"3"3"3"3

.D.OkcenhsiF "786. "218. "00.1 "00.1 "057.1.D.O.xaM "590.1 "224.1 "05.1 "00.2 "05.2

looTgninnuR 52100P14 05100P14 00200P14 05200P14 00300P14

looTgnilluP ******** ********831CDJ0400210G25ro5211BS04ro

831CDJ0400210G25ro5211BS04ro

052CDJ040521BS04ro

).ni.qs(aerAwolFgnizilauqE "940. "051. "051. "051. "051.daerhTrewoL TPN"4/1 TPN"8/3 TPN"8/3 TPN"8/3 TPN"8/3daerhTreppU 61-"4/3 41-"8/7 4-"61/31 21-"61/91 21-"2

niPraehSssarB "8/5x"8/1 "8/7x"61/3 "8/7x"61/3 "8/7x"61/3 "8/7x"61/3


“PS” PLUGASSEMBLY 1 1/4” 1 1/2”, 1 3/4”

Part Number 21PS0125 21PS0150Unit Price 700.00 700.00

COMPONENTSCage 21A00042 21A00036

146.00 146.00

Adapter Sub 21A00043 21A00045146.00 146.00

Prong 21B00045 21B00048204.00 204.00

Fishneck 21A00041 21A01127123.00 123.00

Watermelon 21A00040 21A00044146.00 146.00

O-ring #006 #011.55 .55

O-ring #012 (2) #113.55 .75 ea.

O-ring #008 #012.55 .55

ASSEMBLY 2” 2 1/2” 3”Part Number 21PS0200 21PS0250 21PS0300Unit Price 700.00 780.00 825.00

COMPONENTSCage 21A00036 21A00036 21A00036

146.00 146.00 146.00

Adapter Sub 21A00037 21B01187 21B01466146.00 146.00 182.00

Prong 21B00044 21B00044 21B00044204.00 204.00 204.00

Fishneck 21A00455 21A00039 21B01052123.00 204.00 285.00

Watermelon 21A00038 21A00038 21A00038146.00 146.00 146.00

O-ring #011 #011 #011.55 .55 .55

O-ring (2) #113 (2) #113 (2) #113.75 ea. .75 ea. .75 ea.

O-ring #012 #012 #012.55 .55 .55

B-16

“TICPR”/ “TICPX” PLUGS(PACKING STYLE)

The Type “TICPR” Plug is a positiveplug used in conjunction with theType “TICR” Landing Nipple. Thisplug might be used to test tubing orto plug tubing to perform repairs orreplacement of surface equipment.Equalization is achieved by pullingthe equalizing prong from the plugassembly.

The Type “TICPX” Plug is a positiveplug used in conjunction with theType “TICX” Landing Nipple. Thisplug might be used to test tubing orto plug tubing to perform repairs orreplacement of surface equipment.Equalization is achieved by pullingthe equalizing prong from the plugassembly.

"XPCIT"-SNOITACIFICEPS "XPCIT"-SNOITACIFICEPS "XPCIT"-SNOITACIFICEPS "XPCIT"-SNOITACIFICEPS "XPCIT"-SNOITACIFICEPS"005.1 "005.1 "005.1 "005.1 "005.1 "526.1 "526.1 "526.1 "526.1 "526.1 "578.1 "578.1 "578.1 "578.1 "578.1 "313.2 "313.2 "313.2 "313.2 "313.2 "057.2 "057.2 "057.2 "057.2 "057.2 "318.2 "318.2 "318.2 "318.2 "318.2 "318.3 "318.3 "318.3 "318.3 "318.3

.D.OkcenhsiF "00.1 "00.1 "573.1 "573.1 "573.1 "573.1 "573.1.D.OoGoN "094.1 "516.1 "568.1 "003.2 "047.2 "008.2 "508.3

noitcennoCdaerhT 61-"8/11 61-"8/11 41-"8/31 21-"4/31 21-"4/12BLS

21-"4/12BLS

21-"61/13BLS

/gninnuRgnorPlooTgnilluP

831CDJ045211BS04ro

831CDJ045211BS04ro

002CDJ040021BS04ro

002CDJ040021BS04ro

002CDJ040021BS04ro

002CDJ040021BS04ro

002CDJ040021BS04ro

wolFgnizilauqE).ni.qs(aerA "940. "940. "070. "571. "571. "571. "571.

"RPCIT"-SNOITACIFICEPS "RPCIT"-SNOITACIFICEPS "RPCIT"-SNOITACIFICEPS "RPCIT"-SNOITACIFICEPS "RPCIT"-SNOITACIFICEPS"017.1 "017.1 "017.1 "017.1 "017.1 "187.1 "187.1 "187.1 "187.1 "187.1

.D.OkcenhsiF "781.1 "781.1.D.OoGoN "007.1 "077.1

noitcennoCdaerhT 61-"8/11 41-"8/31/gninnuRgnorP

looTgnilluP051CDJ040511BS04ro

051CDJ040511BS04ro

wolFgnizilauqE).ni.qs(aerA "940. "940.

"578.1 "578.1 "578.1 "578.1 "578.1 "521.2 "521.2 "521.2 "521.2 "521.2 "881.2 "881.2 "881.2 "881.2 "881.2 "313.2 "313.2 "313.2 "313.2 "313.2 "265.2 "265.2 "265.2 "265.2 "265.2 "886.3 "886.3 "886.3 "886.3 "886.3 "318.3 "318.3 "318.3 "318.3 "318.3

.D.OkcenhsiF "781.1 "781.1 "573.1 "573.1 "573.1 "573.1 "573.1.D.OoGoN "568.1 "511.2 "571.2 "003.2 "055.2 "576.3 "508.3

noitcennoCdaerhT 41-"8/31 41-"8/31 21-"4/31 21-"4/31 BLS21-"2 BLS21-"61/13 BLS21-"61/13

/gninnuRgnorPlooTgnilluP

051CDJ040511BS04ro

051CDJ040511BS04ro

002CDJ040021BS04ro

002CDJ040021BS04ro

002CDJ040021BS04ro

002CDJ040021BS04ro

002CDJ040021BS04ro

wolFgnizilauqE).ni.qs(aerA "940. "940. "940. "940. "940. "571. "571.


“TICPR” PLUGASSEMBLY 1.710” 1.781” 1.875”

Part Number 21TICPR2171 21TICPR2178 21TICPR2188Unit Price 1175.00 1175.00 1175.00

COMPONENTSHousing 21B01413 21A00783 21A00784

301.00 301.00 301.00

Cap 21A01414 21A00915 21A00915173.00 173.00 173.00

Prong Assembly 21TICPR3171 21TICPR3213 21TICPR3213890.00 890.00 890.00

Prong 21B00860 21B00863 21B00863514.00 514.00 514.00

Nose 21A00219 21A00240 21A0024075.00 75.00 75.00

Spacer Ring 21A00216 21A00239 21A0023971.00 71.00 71.00

Double Male (2) 21A00218 (2) 21A00241 (2) 21A00241Adapter Ring 27.00 ea. 27.00 ea. 27.00 ea.



B-18

“TICPR” PLUGASSEMBLY 2.125” 2.188” 2.313” 2.562”

Part Number 21TICPR2213 21TICPR2218 21TICPR2231 21TICPR2256Unit Price 1175.00 1110.00 1100.00 1320.00

COMPONENTSHousing 21A00785 21B00839 21A00787 21B00841

301.00 332.00 332.00 382.00

Cap 21A00915 21A00838 21A00838 21A01415173.00 231.00 231.00 316.00

Prong Assembly 21TICPR3213 21TICPX5200 21TICPX5200 21TICPX5250890.00 620.00 620.00 645.00

Prong 21B00863 21B01339 21B01339 21B01340514.00 341.00 341.00 373.00

Nose 21A00240 21A00229 21A00229 21A0022375.00 62.00 62.00 62.00

Spacer Ring 21A00239 21A00227 21A00227 21A0022171.00 71.00 71.00 71.00

Double Male (2) 21A00241 (2) 21A00226 (2) 21A00226 (2) 21A00220Adapter Ring 27.00 ea. 27.00 ea. 27.00 ea. 27.00 ea.




“TICPR” PLUGASSEMBLY 3.688” 3.813”

Part Number 21TICPR2368 21TICPR2381Unit Price 3570.00 3570.00

COMPONENTSHousing 21B01414 21B01579

1392.00 1392.00

Cap 21A01418 21A01418355.00 355.00

Prong Assembly 21TICPX5400 21TICPX54001670.00 1670.00

Prong 21B01360 21B013601065.00 1065.00

Nose 21B01574 21B01574107.00 107.00

Spacer Ring 21B01575 21B0157594.00 94.00

Double Male (2) 21B01577 (2) 21B01577Adapter Ring 81.00 ea. 81.00 ea.


Vee Packing (12) 91V45140 (12) 91V451406.23 net ea. 6.23 net ea.

O-ring #033 #0331.10 1.10

B-20

“TICPX” PLUG (PACKING STYLE)

ASSEMBLY 1.500” 1.625” 1.875”Part Number 21TICPX1150 21TICPX1163 21TICPX1200Unit Price 1220.00 1220.00 935.00

COMPONENTSHousing 21B00393 21B00394 21B00225

301.00 301.00 350.00

Cap 21A01414 21A01414 ********173.00 173.00

Prong Assembly 21TICPX5150 21TICPX5150 21TICPX5200780.00 780.00 620.00

Prong 21B01335 21B01335 21B01339410.00 410.00 341.00

Nose 21A00243 21A00243 21A0022975.00 75.00 62.00

Spacer Ring 21A00244 21A00244 21A0022771.00 71.00 71.00

Double Male (2) 21A00246 (2) 21A00246 (2) 21A00226Adapter Ring 32.00 ea. 32.00 ea. 27.00 ea.




“TICPX” PLUG (PACKING STYLE)

ASSEMBLY 2.313” 2.750” 2.813” 3.813”Part Number 21TICPX1250 21TICPX1300 21TICPX1281 21TICPX1400Unit Price 1045.00 1225.00 1225.00 3175.00

COMPONENTSHousing 21B00219 21B00231 21B01412 21B01578

415.00 580.00 580.00 1318.00

Cap ******** ******** ******** 21A01418355.00

Prong Assembly 21TICPX5250 21TICPX5300 21TICPX5300 21TICPX5400645.00 700.00 700.00 1670.00

Prong 21B01340 21B01342 21B01342 21B01360373.00 480.00 480.00 1065.00

Nose 21A00223 21A00235 21A00235 21B0157462.00 62.00 62.00 107.00

Spacer Ring 21A00221 21A00233 21A00233 21B0157571.00 71.00 71.00 94.00

Double Male (2) 21A00220 (2) 21A00232 (2) 21A00232 (2) 21B01577Adapter Ring 27.00 ea. 27.00 ea. 27.00 ea. 81.00 ea.

Back Up Ring (2) 21A00222 (2) 21A00234 (2) 21A00234 (2) 21B0157624.00 ea. 24.00 ea. 24.00 ea. 53.00 ea.


Viton O-ring ******** ******** ******** #0333.40

B-22

“TICPX” PLUG (GROMMET STYLE)

The Type “TICPX” Plug is a positiveplug used in conjunction with theType “TICX” Locking Mandrel to holdpressure from above and below in aType “TICX” Landing Nipple. Thisplug might be used to test tubing orto plug tubing to perform repairs orreplacement of surface equipment.Equalization is achieved by pullingthe equalizing prong from the plugassembly.

SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS"005.1 "005.1 "005.1 "005.1 "005.1 "526.1 "526.1 "526.1 "526.1 "526.1 "578.1 "578.1 "578.1 "578.1 "578.1 "313.2 "313.2 "313.2 "313.2 "313.2 "057.2 "057.2 "057.2 "057.2 "057.2 "318.2 "318.2 "318.2 "318.2 "318.2

.D.OkcenhsiF "00.1 "00.1 "573.1 "573.1 "573.1 "573.1

.D.OoGoN "094.1 "516.1 "568.1 "003.2 "047.2 "597.2

noitcennoCdaerhT 61-"8/11 61-"8/11 41-"8/31 21-"4/31 BLS21-"4/12 BLS21-"4/12/gninnuRgnorP

looTgnilluP831CDJ045211BS04ro

831CDJ045211BS04ro

002CDJ040021BS04ro

002CDJ040021BS04ro

002CDJ040021BS04ro

002CDJ040021BS04ro

aerAwolFgnizilauqE).ni.qs( "940. "940. "070. "571. "571. "571.


“TICPX” PLUG (GROMMET STYLE)



301.00 301.00 262.00

Cap 21A01414 21A01414 21A00915173.00 173.00 173.00


Prong 21B01336 21B01336 21B01337336.00 336.00 336.00

Grommet (2) 97A01142 (2) 97A01142 (2) 97A0103220.00 ea. 20.00 ea. 22.00 ea.



292.00 658.00 658.00

Cap 21A00838 21A01418 21A01418231.00 355.00 355.00


Prong 21B01338 21B01341 21B01341315.00 446.00 446.00

Grommet (2) 97A00578 (2) 97A01130 (2) 97A0113029.00 ea. 35.00 ea. 35.00 ea

O-ring ******** #030 #0331.00 1.10

B-24

“TICR”/ “TICX” PLUGS

The Type “TICR” Plug is a positiveplug used in conjunction with theType “TICR” Locking Mandrel to holdpressure from above and below in aType “TICR” Landing Nipple. Thisplug might be used to test tubing orto plug tubing to perform repairs orreplacement of surface equipment.Equalization is achieved by shiftingan equalizing valve into the openposition before the mandrel isunlocked.

The Type “TICX” Plug is a positiveplug used in conjunction with theType “TICX” Locking Mandrel to holdpressure from above and below in aType “TICX” Landing Nipple. Thisplug might be used to test tubing orto plug tubing to perform repairs orreplacement of surface equipment.Equalization is achieved by shiftingan equalizing valve into the openposition before the mandrel isunlocked.

"RCIT"-SNOITACIFICEPS "RCIT"-SNOITACIFICEPS "RCIT"-SNOITACIFICEPS "RCIT"-SNOITACIFICEPS "RCIT"-SNOITACIFICEPS"017.1 "017.1 "017.1 "017.1 "017.1 "187.1 "187.1 "187.1 "187.1 "187.1 "578.1 "578.1 "578.1 "578.1 "578.1 "000.2 "000.2 "000.2 "000.2 "000.2 "521.2 "521.2 "521.2 "521.2 "521.2 "881.2 "881.2 "881.2 "881.2 "881.2 "313.2 "313.2 "313.2 "313.2 "313.2 "265.2 "265.2 "265.2 "265.2 "265.2

.D.OoGoN "007.1 "077.1 "568.1 "099.1 "511.2 "571.2 "003.2 "055.2.D.ImuminiM "526. "187. "187. "187. "187. "500.1 "500.1 "091.1

noitcennoCdaerhT 61-"8/11 41-"8/31 41-"8/31 41-"8/31 41-"8/31 21-"4/31 21-"4/31 BLS21-"2aerAwolFgnizilauqE

).ni.qs( "940. "820. "820. "820. "820. "940. "940. "140.

"XCIT"-SNOITACIFICEPS "XCIT"-SNOITACIFICEPS "XCIT"-SNOITACIFICEPS "XCIT"-SNOITACIFICEPS "XCIT"-SNOITACIFICEPS"005.1 "005.1 "005.1 "005.1 "005.1 "526.1 "526.1 "526.1 "526.1 "526.1 "578.1 "578.1 "578.1 "578.1 "578.1 "313.2 "313.2 "313.2 "313.2 "313.2 "057.2 "057.2 "057.2 "057.2 "057.2 "318.2 "318.2 "318.2 "318.2 "318.2 "313.3 "313.3 "313.3 "313.3 "313.3 "318.3 "318.3 "318.3 "318.3 "318.3

.D.OoGoN "094.1 "516.1 "568.1 "003.2 "047.2 "008.2 "003.3 "008.3.D.ImuminiM "526. "526. "578. "322.1 "036.1 "036.1 "00.2 "505.2

noitcennoCdaerhT 61-"8/11 61-"8/11 41-"8/31 21-"4/31 BLS21-"4/12 BLS21-"4/12 BLS21-"4/32 BLS21-"61/13

aerAwolFgnizilauqE).ni.qs( "410. "940. "820. "410. "550. "550. "380. "820.


“TICR” PLUGASSEMBLY 1.710” 1.781” 1.875” 2.000”

Part Number 21TICR00171 21TICR00178 21TICR00188 21TICR00200Unit Price 725.00 725.00 725.00 725.00

COMPONENTSEqualizing Sub Assembly 21TICR03171 21TICR03178 21TICR03188 21TICR03200

585.00 585.00 585.00 585.00

Housing 21B01400 21B01405 21B01404 21B01406437.00 437.00 437.00 437.00

Valve 21A01126 21A01405 21A01405 21A01405195.00 195.00 195.00 195.00

Viton O-ring (2) #116 (2) #120 (2) #120 (2) #1201.40 ea. 2.35 ea. 2.35 ea. 2.35 ea.

Cap 21A01414 21A00915 21A00915 21A00915173.00 173.00 173.00 173.00

ASSEMBLY 2.125” 2.188” 2.313” 2.562”Part Number 21TICR00213 21TICR00218 21TICR00325 21TICR00256Unit Price 725.00 890.00 890.00 960.00

COMPONENTSEqualizing Sub Assembly 21TICR03213 21TICR03218 21TICR03250 21TICR03256

585.00 685.00 685.00 690.00

Housing 21B01401 21B01402 21B01407 21B01403437.00 465.00 465.00 491.00

Valve 21A01405 21A01406 21A01406 21A01404195.00 230.00 230.00 235.00


Viton O-ring ******** ******** ******** #0313.05

Cap 21A00915 21A00838 21A00838 21A01415173.00 231.00 231.00 316.00

B-26

“TICX” PLUGASSEMBLY 1.500” 1.625” 1.875” 2.313”

Part Number 21TICX01150 21TICX01163 21TICX01200 21TICX01250Unit Price 595.00 595.00 595.00 750.00

COMPONENTSEqualizing Sub Assembly 21TICX00150 21TICX00163 21TICX00200 21TICX00250

450.00 450.00 450.00 520.00

Housing 21B01397 21B01395 21B00487 21B00411303.00 303.00 303.00 347.00

Valve 21A00347 21A00347 21A00348 21A00410162.00 162.00 162.00 176.00


Cap 21A01414 21A01414 21A00915 21A00838173.00 173.00 173.00 231.00

ASSEMBLY 2.750” 2.813” 3.313” 3.813”Part Number 21TICX01300 21TICX01281 21TICX01350 21TICX01400Unit Price 905.00 905.00 1605.00 1505.00

COMPONENTSEqualizing Sub Assembly 21TICX00300 21TICX00281 21TICX00350 21TICX00400

575.00 575.00 1140.00 905.00

Housing 21B01398 21B01396 21B01200 21B01399379.00 379.00 746.00 732.00

Valve 21A01416 21A01416 21B01202 21A01417193.00 193.00 377.00 357.00


Viton O-ring #033 #033 #037 #0393.40 3.40 5.80 5.80

Cap 21A01418 21A01418 21B01201 21B01420355.00 355.00 402.00 426.00


“TICXR” PUMP THROUGH PLUG

ASSEMBLY 1 1/2” 2” 2 1/2” 3”Part Number 21TICXR3150 21TICXR3200 21TICXR3250 21TICXR3300Unit Price 360.00 360.00 435.00 545.00

COMPONENTSCap 21B01511 21B01502 21B01503 21B01505

267.00 267.00 323.00 407.00

Seat 21B01512 21B01501 21B01504 21B0150674.00 74.00 84.00 92.00

Spring Sleeve 21B01510 21B01509 21B01508 21B0150773.00 73.00 73.00 92.00

Spring 90A01499 90A01044 90A00895 90A0113616.00 27.00 29.00 32.00

Ball 95SS0075 95SS0094 95SS0154 95SS012511.00 16.00 22.00 26.00

O-ring ******** ******** ******** #0331.10

INCONEL SPRINGS (OPTIONAL)Spring ******** 90N02120 90N02121 ********

51.00 51.00

The Type “TICXR” Pump ThroughPlug is used in conjunction with theType “TICX” Locking Mandrel and theType “TICX” Equalizing SubAssembly to hold pressure frombelow in a Type “TICX” LandingNipple. This plug has pump throughcapabilities that would allow anoperator to pump fluids into well bore.

SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS"2/11 "2/11 "2/11 "2/11 "2/11 "2"2"2"2"2 "2/12 "2/12 "2/12 "2/12 "2/12 "3"3"3"3"3

.D.O.xaM "523.1 "057.1 "00.2 "075.2noitcennoCdaerhT 61-"8/11 41-8/31 21-"4/31 BLS21-"4/12

taeS(aerAwolF).ni.qs()eloH "603. "173. "096. "168.

B-28

DUAL FLAPPER CHECK VALVEThe Dual Flapper Check Valve is adevice used to prevent pressure orfluid from passing up through theassembly. It is used in conjunctionwith a “TICX” or “TICR” LockingMandrel. The Dual Flapper CheckValve has two flapper assemblies withseals to prevent pressure of fluid by-pass upwards.

The Dual Flapper Check Valve is aback pressure valve that allows theoperator to pump through theassembly while allowing maxiumumflow through the assembly withminimal restriction.

Equalization can be achieved byplacing an equalizing sub above theassembly, or by running a prongattached to the pulling tool that willknock both flappers off seat.

SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS"2/11 "2/11 "2/11 "2/11 "2/11 "2"2"2"2"2 "2/12 "2/12 "2/12 "2/12 "2/12

.D.O.XAM "823.1 "057.1 "651.2)2(GNIR-O 611# 221# 821#)2(GNIR-O 611# 512# 122#

NOITCENNOCPOT 61-"8/11 41-"8/31 21-"4/31NOITCENNOCMOTTOB TPN"8/3 TPN"2/1 TPN"4/3).NI.QS(AERAWOLF "802. "473. "587.


DUAL FLAPPER CHECK VALVEASSEMBLY 1 1/2” 2” 2 1/2”

Part Number 21DUAL150 21DUAL187 21DUAL231

COMPONENTSTop Sub 21DUAL005 21DUAL001 21DUAL011

Bottom Sub 21DUAL006 21DUAL002 21DUAL012

Major Redress Kit 21DUAL007 21DUAL003 21DUAL013

Redress Kit 21DUAL008 21DUAL004 21DUAL014

Includes Springs, Grommet Seats, Pins, O-rings & Back up Rings

OPTIONALTeflon Seat 21DUAL015-TEF 21DUAL020-TEF 21DUAL025-TEF

*Prices Available Upon Request

B-30



moc.tni-sloot.www




Prices effective June 1, 2012 1-800-338-0308 C-1

C

PACKOFF EQUIPMENT

C- 2

“A” PACKOFF (UPPER ASSEMBLY)

The Type “A” Packoff is used tostraddle and seal off holes in thetubing. The upper and lower Type “A”Packoffs are usually joined by spacerpipe. Upper and lower tubing stopsare used to keep the packoffassemblies in the locked position. Inspecial applications, an upper orlower can be used as a tubing plug insituations where during wellcompletion, landing nipples were notinstalled.

SNOITACIFICEPS"2"2"2"2"2 "2/12 "2/12 "2/12 "2/12 "2/12 "3"3"3"3"3

.D.OgninnuR.xaM "448.1 "182.2 "007.2.D.I "640.1 "521.1 "135.1

kcenhsiF edisnI"005.1 edistuO"057.1 edistuO"13.2niPraehS ssarB"61/3 ssarB"8/1 ssarB"61/5

noitcennoCrewoL PL"1 EUEdr01-"4/11 TPN"2/11looTgnilluP 002SRP04 052CDJ04 003CDJ04looTgninnuR 002SRP04 052CDJ04 003CDJ04


“A” PACKOFF (UPPER)

ASSEMBLY 2” 2 1/2” 3”Part Number 13CC1200 13CC1250 13CC1300Unit Price 760.00 880.00 1470.00

COMPONENTSUpper Mandrel Core 13B00071 13B00258 13A00311

286.00 286.00 477.00

Element (2) 97A00813 (2) 97A01226 (2) 97A0059732.00 ea. 44.00 ea. 102.00 ea.

O-Ring 97A00814 97A01227 97A0059826.00 27.00 33.00

Cap 13B00074 13B00260 13A0031298.00 124.00 171.00

Body 13B00072 13B00259 13B00068295.00 393.00 577.00

Upper Mandrel Head 13B01038 13B00263 13A00313165.00 171.00 286.00

Split Ring ******** ******** (2) 13B0006640.00 ea.

O-Ring #123 #128 #133.85 1.00 1.10

O-Ring (2) #218 (2) #325 (2) #3291.00 ea. 1.10 ea. 1.10 ea.

*Other style & size fishnecks are available upon request.

C- 4

“A” PACKOFF (LOWER ASSEMBLY)

The Type “A” Packoff is used tostraddle and seal off holes in thetubing. The upper and lower Type “A”Packoffs are usually joined by spacerpipe. Upper and lower tubing stopsare used to keep the packoffassemblies in the locked position. Inspecial applications, an upper orlower can be used as a tubing plug insituations where during wellcompletion, landing nipples were notinstalled.

SNOITACIFICEPS"2"2"2"2"2 "2/12 "2/12 "2/12 "2/12 "2/12 "3"3"3"3"3

.D.OgninnuR.xaM "448.1 "182.2 "007.2.D.I "740.1 "521.1 "135.1

kcenhsiF A/N "057.1 A/N

niPraehS ssarB"61/3 munimulA"8/1ssarB"61/3dna munimulA"61/5

noitcennoCreppU TPN"1 EUEdr01-"4/11 TPN"2/11looTgnilluP 002CDJ04 052CDJ04 003CDJ04looTgninnuR 002CDJ04 052CDJ04 003CDJ04


“A” PACKOFF (LOWER)

ASSEMBLY 2” 2 1/2” 3”Part Number 13CC2200 13CC2250 13CC2300Unit Price 760.00 880.00 1470.00

COMPONENTSLower Mandrel Core 13B00073 13B00258 13A00310

286.00 286.00 479.00

Element (2) 97A00813 (2) 97A01226 (2) 97A0059732.00 ea. 44.00 ea. 102.00 ea.

O-Ring 97A00814 97A01227 97A0059826.00 27.00 33.00

Cap 13B00074 13B00260 13A0031298.00 124.00 171.00

Body 13B00072 13B00259 13B00068295.00 393.00 577.00

Lower Body Stop 13B00070 13B00069 13B00067143.00 171.00 286.00

Split Ring ******** ******** (2) 13B0006640.00 ea.

Running Adapter ******** 13B00262 ********207.00

O-Ring #123 #128 #133.85 1.00 1.10

O-Ring #218 #325 #3291.00 1.10 1.10

O-Ring ******** #224 ********1.10

C- 6

“G” PACKOFFELEMENT ASSEMBLY

The Type “G” Packoff is used tostraddle and seal off holes in thetubing. The upper and lower Type “G”Packoffs are usually joined by spacerpipe. Upper and lower tubing stopsare used to keep the packoffassemblies in the locked position. Inspecial applications, an upper orlower can be used as a tubing plug insituations where during wellcompletion, landing nipples were notinstalled.

)LANOITPO(

)LANOITPO(


noitcennoCreppU 21-"8/51 21-"61/12noitcennoCrewoL dr01-"1 dr01-"2/11

.D.O.xaM "048.1 "572.2.D.ImuminiM "360.1 "005.1

)lanoitpo(.D.IkcenhsiF "573.1 "18.1


“G” PACKOFFELEMENT ASSEMBLY

ASSEMBLY 2” 2 1/2”Part Number 13GP2200 13GP2250Unit Price 790.00 1085.00

COMPONENTSLocking Sleeve 13B00929 13A01275

235.00 295.00

Lug Segment (3) 13A01270 (3) 13A0127620.00 ea. 25.00 ea.

Locking Segment (6) 13A01269 (6) 13A0127710.00 ea. 10.00 ea.

Element Expander #1 13A00930 13A01278140.00 204.00

Element 97A00588 97A0057588.00 88.00

Element Expander #2 13A00931 13A0127979.00 102.00

Mandrel 13B00928 13A01280204.00 258.00

Lower Sub 13A00927 13A01281132.00 194.00

Spacer 13A00924 (2) 13A0128216.00 20.00 ea.

O-Ring (2) #219 (2) #2241.00 ea. 1.10 ea.

OPTIONAL (EXTRA)Fishneck 13B01167 13B00996

220.00 295.00

Collet 13A00925 13B00932220.00 295.00

C- 8

“K-3” PACKOFF (UPPER)

The Type “K-3” Packoff is used tostraddle and seal off holes in thetubing. The upper and lower Type“K-3” Packoffs are usually joined byspacer pipe. Upper and lower tubingstops are used to keep the packoffassemblies in the locked position. Inspecial applications, an upper orlower can be used as a tubing plug insituations where during wellcompletion, landing nipples were notinstalled.

SNOITACIFICEPS"2"2"2"2"2 "2/12 "2/12 "2/12 "2/12 "2/12

)gniReguaG(.D.O.xaM "318.1 "912.2.D.I.niM "318. "260.1

looTgninnuR looTgninnuRD looTgninnuRDlooTgnilluP 0020SA41 0520SA41swercSssarB "61/7x23-01 "61/7x23-01swercSleetS "61/5x02-"4/1 "61/5x02-"4/1

wercSdaeHdnuoR "61/3x23-01 "61/3x23-01wercSraehSssarB "61/5x02-"4/1 "61/5x02-"4/1

daerhTrewoL PL"1 PL"4/11


“K-3” PACKOFF (UPPER)

ASSEMBLY 2” 2 1/2”Part Number 13K31200 13K31250Unit Price 1780.00 1780.00


349.00 349.00

Keeper Ring 13B00401 13B00451159.00 159.00

Body 13B00402 13B00452534.00 534.00

O-Ring #216 #222.85 1.00

10-32 x 3/16” Pan 10320188 10320188Head Screw 1.85 1.85

Body Lock Ring 13B00403 13B00453214.00 214.00

O-Ring #021 #124.85 .85

1/4-20 x 5/16” Annealed (8) 02520313-1 (8) 02520313-1Steel Screw 2.31 ea. 2.31 ea.

1/4-20 x 5/16” Brass (4) 02520313-2 (4) 02520313-2Shear Screw 1.59 ea. 1.59 ea.

Element 97A01200 97A0121086.00 101.00

Gauge Ring (2) 13B00404 (2) 13B0045460.00 ea. 60.00 ea.

Lock Ring Housing Spacer 13B00405 13B0045584.00 84.00

10-32 x 7/16” Brass (2) 10320438 (2) 10320438Shear Screw .99 ea. .99 ea.

Threaded Lock Ring 13B00406 13B00456Housing 465.00 465.00

C- 10

“K-3” PACKOFF (LOWER)

The Type “K-3” Packoff is used tostraddle and seal off holes in thetubing. The upper and lower Type“K-3” Packoffs are usually joined byspacer pipe. Upper and lower tubingstops are used to keep the packoffassemblies in the locked position. Inspecial applications, an upper orlower can be used as a tubing plug insituations where during wellcompletion, landing nipples were notinstalled.

SNOITACIFICEPS"2"2"2"2"2 "2/12 "2/12 "2/12 "2/12 "2/12

)gniReguaG(.D.O.xaM "318.1 "912.2.D.I.niM "318. "260.1

looTgninnuR looTgninnuRD looTgninnuRDlooTgnilluP 0020SA41 0520SA41swercSssarB "61/7x23-01 "61/7x23-01swercSleetS "61/5x02-"4/1 "61/5x02-"4/1

wercSdaeHdnuoR "61/3x23-01 "61/3x23-01wercSraehSssarB "61/5x02-"4/1 "61/5x02-"4/1

Prices effective June 1, 2012 1-800-338-0308 C-1 1

“K-3” PACKOFF (LOWER)



349.00 349.00

Keeper Ring 13B00401 13B00451159.00 159.00

Body 13B00402 13B00452534.00 534.00

O-Ring #216 #222.85 1.00

10-32 x 3/16” Pan 10320188 10320188Head Screw 1.85 1.85

Body Lock Ring 13B00403 13B00453214.00 214.00

O-Ring #021 #124.85 .85

1/4-20 x 5/16” Annealed (8) 02520313-1 (8) 02520313-1Steel Screw 2.31 ea. 2.31 ea.

1/4-20 x 5/16” Brass (4) 02520313-2 (4) 02520313-2Shear Screw 1.59 ea. 1.59 ea.

Element 97A01200 97A0121086.00 101.00

Gauge Ring (2) 13B00404 (2) 13B0045460.00 ea. 60.00 ea.

Lock Ring Housing Spacer 13B00405 13B0045584.00 84.00

10-32 x 7/16” Brass (2) 10320438 (2) 10320438Shear Screw .99 ea. .99 ea.

Lock Ring Housing 13B00407 13B00457449.00 449.00

C- 12

BAKER STYLE LANDING SHOE(FOR “K-3” PACKOFF)

The Baker Style Landing Shoe ismade up to a joint of spacer pipe toconnect the upper and lower Type“K-3” Packoff.

SNOITACIFICEPS"2"2"2"2"2 "2/12 "2/12 "2/12 "2/12 "2/12

eroBlaeS "005.1 "187.1.D.I.niM "318. "260.1

noitcennoCdaerhT )epiPeniL(TPN"1 )epiPeniL(TPN"4/11



COMPONENTSRecepticle 13B00424 13B00474

509.00 509.00

Stinger 13K31201 13K31251450.00 450.00

Mandrel 13B00420 13B00470227.00 227.00


Adapter Ring 13B00422 13B0047236.00 36.00

Packing (6) 91BKR150 (6) 91BKR1784.96 net ea. 4.95 net ea.

Nut 13B00423 13B0047373.00 73.00

BAKER STYLE LANDING SHOE(FOR “K-3” PACKOFF)

C- 14

“A” SPEAR (FOR “K-3” PACKOFF)

The Type “A” Spear is used to pull theBaker Style “K-3” Packoff.

SNOITACIFICEPS"2"2"2"2"2 "2/12 "2/12 "2/12 "2/12 "2/12

noitcennoCdaerhT 01-"61/51 01-"61/11kcenhsiF "573.1 "057.1

segagnE/wraepS.D.I "005.1 "187.1wercSteS "8/3x02-"4/1 "2/1x02-"4/1


“A” SPEAR (FOR “K-3” PACKOFF)

ASSEMBLY 2” 2 1/2”Part Number 14AS0200 14AS0250Unit Price 1025.00 1145.00

COMPONENTSFishneck 14A00010 14A00015

326.00 358.00

Core 14A00011 14A00016370.00 403.00

Collet 14A00012 14A00017336.00 389.00

Spring (Inconel) 90N02161 90N0216237.00 43.00

C- 16

“TIC” PACKOFF(UPPER ELEMENT ASSEMBLY)SIZE 2” 2 1/2” 3” 4”

Unit Price 1145.00 Net 1210.00 Net 1560.00 Net 3240.00 Net

The “TIC” Packoff was originallydesigned for heavywall tubingapplications. The packoff can now bemanufactured for many different sizetubings and weights. The packoff isused to straddle and seal off holes inthe tubing. The upper and lower typepackoff are usually joined by spacerpipe. Upper and lower tubing stopsare used to keep the packoffassemblies in the locked position. Inspecial applications, and upper orlower can be used as a tubing plug insituations where during wellcompletion, landing nipples were notinstalled.

TUBING WEIGHTS 4.7# 6.5# 9.2# 11.6#

SNOITACIFICEPS"2"2"2"2"2 "2/12 "2/12 "2/12 "2/12 "2/12 "3"3"3"3"3 "4"4"4"4"4

tehctaR 0021LC21 0521LC21 5721LC21 LAICEPSgnir-O 612# 022# 322# 922#gnir-O 621# 422# 622# 232#

wercSteS "61/3X82-"4/1 "61/3X82-"4/1 "61/3X82-"4/1 "61/3X82-"4/1


“TIC” PACKOFF(LOWER ELEMENT ASSEMBLY)

SIZE 2” 2 1/2” 3” 4”

Unit Price 1145.00 Net 1210.00 Net 1560.00 Net 3240.00 Net

The “TIC” Packoff was originallydesigned for heavywall tubingapplications. The packoff can now bemanufactured for many different sizetubings and weights. The packoff isused to straddle and seal off holes inthe tubing. The upper and lower typepackoff are usually joined by spacerpipe. Upper and lower tubing stopsare used to keep the packoffassemblies in the locked position. Inspecial applications, and upper orlower can be used as a tubing plug insituations where during wellcompletion, landing nipples were notinstalled.

TUBING WEIGHTS 4.7# 6.5# 9.2# 11.6#

SNOITACIFICEPS"2"2"2"2"2 "2/12 "2/12 "2/12 "2/12 "2/12 "3"3"3"3"3 "4"4"4"4"4

tehctaR 0021LC21 0521LC21 5721LC21 LAICEPSgnir-O 612# 022# 322# 922#gnir-O 621# 422# 622# 232#

wercSteS "61/3X82-"4/1 "61/3X82-"4/1 "61/3X82-"4/1 "61/3X82-"4/1

C- 18

TIC 1-TRIP TUBING PLUGThe TIC 1-Trip Tubing Plug is designed to set in 23/8” 4.7# and 2 7/8” 6.5# 8RD collared tubing.The plug can be configured as a positive plug (holdpressure from top and bottom), standing valve(hold pressure from top) and pump thru (holdpressure from bottom). All types have a Kobeknockout equalizing feature.

The TIC Tubing Plug can also be manufactured formany different size tubings and weights, using an“A” Tubing Stop for the lower stop.

Examples:

2 1/16” 3.25# 2 7/8” 8.7# 2 7/8” 7.9#3 1/2” 12.95# 3 1/2” 9.2#

TIC Plug Elements are available in:

Viton (Standard)

HSN (Optional)

AFLAS (Optional)

*Also available with “A-1” TypeTubing Stop in place of “G” Anchor




moc.tni-sloot.www




C- 20

“G” STOP (ANCHOR)The Type “G” Stop Anchor isdesigned to be set in the tubing wallthrough standard wireline means. TheType “G” Stop Anchor is often used inconjunction with the Type “G”Element Assembly to pack off holesin the tubing.


.D.I.niM "070.1 "005.1.D.IkcenhsiF "093.1 "318.1

noitcennoCdaerhT 21-"8/51 21-"61/12.D.O.xaM "538.1 "572.2

looTgninnuR 00200G14 05200G14looTgnilluP 0021SG04 0521SG04

niPraehSssarB "4/1x"61/3 "4/1x"61/3


“G” STOP (ANCHOR)ASSEMBLY 2” 2 1/2”

Part Number 13G01200 13G01250Unit Price 785.00 835.00

COMPONENTSSlip Mandrel 13B01426 13B01428

332.00 347.00

Slip 13B01425 13B01427482.00 505.00

RUNNING SUB (EXTRA)13B01019 13B01020

120.00 128.00

SPACER PIPESpacer pipe and collars are used toconnect upper and lower packoffs.

LP 10rd NU

1” x 5’ 63SP2100 63SP3100185.00 185.00

1” Collar 94CL1000 94CL000019.00 19.00

1 1/4” x 5’ 63SP2125 63SP3125195.00 195.00

1 1/4” Collar 94CL1001 94CL000322.00 27.00

1 1/2” x 5’ 63SP2150 63SP3150218.00 218.00

1 1/2” Collar 94CL1002 94CL015024.00 31.00

C- 22

“F” COLLAR STOPThe Type “F” Collar Stop is designedto locate in the collar recess of APIupset and non-upset tubing. Bylowering the stop to the desired depthand lifting upward, the latch springsare tripped allowing the stop arms toexpand into the collar recess.Downward jarring on the innermandrel pushes it down behind thecollar stop arms locking them intoplace in the collar recess.

SNOITACIFICEPS"2"2"2"2"2 "2/12 "2/12 "2/12 "2/12 "2/12 "3"3"3"3"3 "4"4"4"4"4

.D.I.niM "578. "521.1 "526.1 "886.1.D.OkcenhsiF "573.1 "057.1 "313.2 "313.2looTgninnuR 05200F14 05200F14 00300F14 00400F14looTgnilluP 002CDJ04 052CDJ04 003CDJ04 003CDJ04


“F” COLLAR STOP RUNNING TOOL

The Type “F” Collar Stop RunningTool is used to set the Type “F” CollarStop.

SNOITACIFICEPS"2/12,"2 "2/12,"2 "2/12,"2 "2/12,"2 "2/12,"2 "3"3"3"3"3 "4"4"4"4"4

.D.OkcenhsiF "573.1 "057.1 "313.2noitcennoCniP 01-"61/51 01-"61/51 01-"61/11

.D.O.xaM "005.1 "000.2 "313.2

niPleetS "61/31x"4/1:"2"2/11x"4/1:"2/12 "2x"4/1 "2x"4/1

C- 24

“F” COLLAR STOPASSEMBLY 2” 2 1/2” *2 1/2”

Part Number 33F00200 33F00250 33F00251Unit Price 245.00 295.00 360.00

COMPONENTSArm (2) 33B00831 (2) 33B00831 (2) 33B00831

37.00 ea. 37.00 ea. 37.00 ea.

Body 33B00719 33B00002 33B00003117.00 131.00 203.00

Ring 33A00648 33A00394 33A0039427.00 33.00 33.00

Spring (2) 90A00557 (2) 90A00558 (2) 90A0055810.00 ea. 10.00 ea. 10.00 ea.

*With 1 3/8” Fishneck

“F” COLLAR STOP RUNNING TOOL

SIZE 2”, 2 1/2” 3” 4”Part Number 41F00250 41F00300 41F00400Unit Price 175.00 205.00 325.00

ASSEMBLY 3” 4”Part Number 33F00300 33F00400Unit Price 645.00 920.00

COMPONENTSArm (2) 33B00831 (2) 33B00831

37.00 ea. 37.00 ea.

Body 33B00715 33B00716301.00 428.00

Ring 33A01275 33A0127672.00 106.00

Spring (2) 90A00969 (2) 90A0115610.00 ea. 16.00 ea.




moc.tni-sloot.www




C- 26

“A” TUBING STOP

The Type “A” Tubing Stop is designedfor use in integral joint tubing stringswhere a coupling recess is notavailable. It is used primarily as ananchoring device in packoffapplications.

SNOITACIFICEPS"4/11 "4/11 "4/11 "4/11 "4/11 "2/11 "2/11 "2/11 "2/11 "2/11 "61/12 "61/12 "61/12 "61/12 "61/12

.D.I.niM "834. "526. "526..D.OkcenhsiF "578. "881.1 "881.1

detcarteRspilS.D.O.xaM "432.1 "834.1 "834.1looTgninnuR 521CDJ04 051CDJ04 051CDJ04looTgnilluP 521CDJ04 051CDJ04 051CDJ04

eziSniPraehS "8/1 "61/3 "61/3

SNOITACIFICEPS"2"2"2"2"2 )#7.8("2/12 )#7.8("2/12 )#7.8("2/12 )#7.8("2/12 )#7.8("2/12 )#9.7("2/12 )#9.7("2/12 )#9.7("2/12 )#9.7("2/12 )#9.7("2/12 "2/12 "2/12 "2/12 "2/12 "2/12 "3"3"3"3"3

.D.I.niM "307. "307. "307. "740.1 "005.1.D.OkcenhsiF "573.1 "573.1 "573.1 "057.1 "313.2

detcarteRspilS.D.O.xaM "057.1 "870.2 "521.2 "052.2 "917.2

looTgninnuR 0000BT14002CDJ04ro

0000BT14002CDJ04ro

0000BT14002CDJ04ro

0000BT14052CDJ04ro

0030BT14003CDJ04ro

looTgnilluP 002CDJ04 002CDJ04 002CDJ04 052CDJ04 003CDJ04eziSniPraehS "61/3 "61/3 "61/3 "8/1 "61/3


“A” TUBING STOPRUNNING TOOL

The Type “A” Collar Stop RunningTool is used to set the Type “A” CollarStop.

SNOITACIFICEPS"2/12,"2 "2/12,"2 "2/12,"2 "2/12,"2 "2/12,"2 "3"3"3"3"3

.D.OkcenhsiF "573.1 "573.1noitcennoCniP 01-"61/51 01-"61/51

.D.O.xaM "005.1 "313.2

eziSniPleetS "61/31x"4/1:"2"2/11x"4/1:"2/12 "8/12x"4/1

C- 28

“A” TUBING STOPASSEMBLY 1 1/4” 1 1/2” 2 1/16” 2”

Part Number 33TB1125 33TB1150 33TB1206 33TB1200Unit Price 780.00 645.00 645.00 645.00

COMPONENTSSlip (3) 33A00392 (3) 33B01628 (3) 33B01424 (3) 33B00105

123.00 ea. 102.00 ea. 106.00 ea. 102.00 ea.

Slip Retainer 33A00393 33B01421 33B01421 33B00108137.00 137.00 137.00 137.00

Body 33A00391 33B00635 33B00635 33B00106303.00 252.00 252.00 252.00

Ring 33A00390 33A00600 33A00600 33A0073627.00 27.00 27.00 29.00

ASSEMBLY 2 1/2” (8.7#) 2 1/2” (7.9#) 2 1/2” 3”Part Number 33TB1287 33TB1279 33TB1250 33TB1300Unit Price 700.00 700.00 700.00 1020.00

COMPONENTSSlip (3) 33B00112 (3) 33B00110 (3) 33B00048 (3) 33B01419

120.00 ea. 120.00 ea. 114.00 ea. 157.00 ea.

Slip Retainer 33B00108 33B00108 33B00057 33B00121137.00 137.00 153.00 224.00

Body 33B00106 33B00106 33B00077 33B00120252.00 252.00 279.00 362.00

Ring 33A00736 33A00736 33A00595 33A0142029.00 29.00 29.00 44.00

“A” TUBING STOP RUNNING TOOL

SIZE 2”, 2 1/2” 3”Part Number 41TB0000 41TB0300Unit Price 175.00 245.00




moc.tni-sloot.www




C- 30

“A-1” TUBING STOPThe Type “A-1” Tubing Stop isdesigned for use in integral jointtubing strings where a couplingrecess is not available. It is usedprimarily as an anchoring device inpackoff applications. The differencebetween the Type “A” and “A-1”Tubing Stop is that the “A-1” has aninternal fishneck, where the Type “A”has an external fishneck.

SNOITACIFICEPS"2"2"2"2"2 "2/12 "2/12 "2/12 "2/12 "2/12 "3"3"3"3"3

.D.I.niM "740.1 "740.1 "005.1.D.IkcenhsiF "573.1 "218.1 "313.2

detcarteRspilS.D.O.xaM "958.1 "182.2 "917.2dednapxEspilS.D.O.xaM "360.2 "135.2 "390.3

looTgninnuR 0021SG04 0521SG04 0031SG04

looTgnilluP 0021SG04 0521SG04 0031SG04eziSniPraehS "61/3 "8/1 "61/3


“A-1” TUBING STOPASSEMBLY 2” 2 1/2” 3”

Part Number 33TB2200 33TB2250 33TB2300Unit Price 710.00 710.00 1020.00

COMPONENTSSlip (3) 33B01629 (3) 33B00048 (3) 33B01419

114.00 ea. 114.00 ea. 157.00 ea.

Slip Retainer 33B01423 33B00057 33B00121153.00 153.00 224.00

Body 33B01422 33B00078 33B00119285.00 285.00 362.00

Ring 33A00736 33A00595 33A0142029.00 29.00 44.00

C- 32



moc.tni-sloot.www




D-1Prices effective June 1, 2012 1-800-338-0308

D

SURFACE EQUIPMENT

D-2

RIGHT ANGLE DRIVE

KLEIN CLAMP

VEEDER ROOT COUNTERThe Veeder Root Counter isattached to the counter headdirectly or by means ofremote cable. It allows theoperator to know the depthof the tool string duringwireline operations as thewire proceeds through thecounter head assembly. Thecounter is available formeasurement in feet ormeters.

A right angle drive allows anoperator to separate theVeeder Root Counter fromthe counter head using anodometer type cable. Theright angle drive unit canalso be used to change theratio between the counterhead and the Veeder RootCounter.

The Klein Wireline Clamp isa lightweight, economicalgrip designed for bare wireapplications. The clamp canbe used for manuallyworking the wire oranchoring the wire duringvarious wireline operations.


VEEDER ROOT COUNTERS80VRC002 Standard 785.0080VRC003 Standard Adapted for Remote 930.0080VRC001 Metric 785.0080VRC004 Metric Adapted for Remote 930.00

REMOTE COMPONENTS80RD0002 Adapter Pin 50.0080RD0009 Threaded Counter Adapter 116.0080RD0001 Adapter for Remote Counter 116.00

*PRICES SUBJECT TO CHANGE

KLEIN CLAMPS98WC1613 1613-30 (.082” - .200”) 210.0098WC1614 1614-40 (.125” - .375”) 255.00

RIGHT ANGLE DRIVES80RD0500 2:1 Ratio 305.0080RD1000 1:1 Ratio 305.0080RD2000 1:2 Ratio 305.00

REPLACEMENT PART80RD0010 Drive Pin 10.00

D-4

8” COUNTERHEAD ASSEMBLYA Counterhead Assembly is a device used for measuring downhole length ofslickline. The slickline is placed in the counter wheel groove while tension isapplied by the adjustable pressure wheels. The pressure wheels are adjustableto exert the correct amount of force needed for an accurate measurement. Aveeder root counter may be attached directly to the Counterhead spindle orattached remotely to display the downhole measurement.

*PRICES AVAILABLE UPON REQUEST


16” COUNTERHEAD ASSEMBLYA Counterhead Assembly is a device used for measuring downhole length ofslickline. The slickline is placed in the counter wheel groove while tension isapplied by the adjustable pressure wheels. The pressure wheels are adjustableto exert the correct amount of force needed for an accurate measurement. Aveeder root counter may be attached directly to the Counterhead spindle orattached remotely to display the downhole measurement.

*PRICES AVAILABLE UPON REQUEST

D-6

COUNTER WHEEL

PRESSURE WHEEL

The Counter Wheelis sold as areplacement partfor the 8” and 16”counter head.Please specify linesize when ordering.

The PressureWheel is sold as areplacement partfor the 8” and 16”counter head.Please specify linesize when ordering.


8” COUNTER WHEELS80CTW082 .082” 320.0080CTW092 .092” 330.0080CTW108 .108” 440.0080CTW125 .125” 440.0080CTW188 3/16” 440.00

80CTW000 Bearing 34.0080CTW001 Spindle F/Direct Drive 73.0080RD0004 Spindle F/Remote Drive 90.0080CTW002 Jam Nut 7.0080RD0008 Counter Cable (per foot) 22.00

METRIC COUNTER WHEELS80CTW082-MET .082” 470.0080CTW092-MET .092” 455.0080CTW108-MET .108” 455.0080CTW125-MET .125 455.0080CTW188-MET 3/16” 455.00

PRESSURE WHEELS(INCLUDES BEARINGS)

80PRW072 .072” 125.0080PRW082 .082” 135.0080PRW092 .092” 145.0080PRW108 .108” 165.0080PRW125 .125” 165.0080PRW188 3/16” 165.00

80PRW000 Bearing 26.00

16” COUNTER WHEELS80C16092 .092” 980.0080C16108 .108” 980.0080C16125 .125” 980.0080C16187 3/16” 1040.00

D-8

16” TIC HAY PULLEY (ALUMINUM)

The TIC 16” Hay Pulley is designed toalter the direction of the wireline from aperpendicular to a horizontal positionwhile in route from the stuffing box tothe wireline unit. The Hay Pulley acts toreduce the amount of side pull force tothe lubricator string. The 16” Hay Pulleyis configured for easy line wiperattachment.


16” TIC HAY PULLEY(ALUMINUM)ASSEMBLY 80HP8016

Unit Price 1620.00

COMPONENTSWheel 80HP0016

656.00

Internal Snap Ring 80HP00331.00

Sheave Bearing (2) 58SB000945.00 ea.

Eye Bolt (2) 80HP003012.00 ea.

Eye Bolt Nut (2) 80HP00291.00 ea.

Bushing (2) 58SB002532.00 ea.

Sheave Guard 80HP0013418.00

Fork 80HP0014440.00

Latch Pin 80HP002517.00

Hinge Nut 80HP00262.00

Hinge Washer (2) 80HP00271.00 ea.

Hinge Bolt 80HP00283.00

Jam Nut 80HP00312.00

Sheave Bolt 80HP00323.00

D-10

7” (.092”) HAY PULLEY

The TIC 7” Hay Pulley is designed toalter the direction of the wireline froma perpendicular to a horizontalposition while in route from thestuffing box to the wireline unit. TheHay Pulley acts to reduce theamount of side pull force to thelubricator string. The TIC 7” HayPulley is configured for easy linewiper attachment.


7” (.092”) HAY PULLEYASSEMBLY 80HP8003

Unit Price 585.00

COMPONENTS

Latch Block 80HP0010136.00

Eye Bolt 80HP003012.00

Nut 80HP00291.00

Fork 80HP0011143.00

Hinge Bolt 80HP00071.00

Hinge Nut 80HP00081.00

Latch Spring 80HP000914.00

Jam Nut 80SHB0042.00

Sheave Bolt 80SHB00343.00

Lock Pin Nut 80B0020017.00

Lock Pin 80B0020116.00

Wheel (with bearings) 80HP0002360.00

Wheel (only) 80HP0003303.00

Bearing (2) 80HPB00038.00 ea.

Screw (4) 80PRW0012.00 ea.

D-12

LINE WIPER FOR 16” HAY PULLEY

The TIC Line Wiper is designed toattach to the TIC Hay Pulley and isused to clean the line as it is beingremoved from the well.


LINE WIPER FOR 16” HAY PULLEYASSEMBLY 80LW1600

Unit Price 1120.00

COMPONENTSLock Pin Nut (2) 80B00200

17.00 ea.


Lock Pin 80LW001040.00

Body 80LW0012779.00

Guide (2) 80A0127030.00 ea.

Packing Follower 80LW000811.00

Rubber 80LW000113.00

Retainer Plate (2) 80A0127433.00 ea.

Plunger Spring 80LW00039.00

Plunger 80LW000630.00

Plunger Housing 80LW001164.00

Adj. Bolt 80LW00028.00

Brass Hex Screw 80LW000543.00

Set Screw (4) 80LW00041.00 ea.

D-14

LINE WIPERThe TIC Line Wiper is designed toattach to the TIC Hay Pulley and isused to clean the line as it is beingremoved from the well.


LINE WIPERASSEMBLY 80LW0000

Unit Price 620.00

COMPONENTSLock Pin Nut (2) 80B00200

17.00 ea.


Lock Pin 80B0020116.00

Body 80LW0007397.00

Guide (2) 80A0127030.00 ea.

Packing Follower 80LW000811.00

Rubber 80LW000113.00

Retainer Plate (2) 80A0127433.00 ea.

Plunger Spring 80LW00039.00

Plunger 80LW000630.00

Adj. Bolt 80LW00028.00

Brass Hex Screw 80LW000543.00

Set Screw (4) 80LW00041.00 ea.

D-16

TREE CONNECTIONS

4 3/4”-4UNION

CONNECTION

2 3/8” 8rd 46TR3238825.00

2 7/8” 8rd 46TR3278825.00

3 1/2” 8rd 46TR3350825.00

Tree Connections are used toconnect the bottom of the wirelinevalve to the connection on top of thetree.


MANUAL STUFFING BOX (5,000 PSI WP)

The Wireline Stuffing Boxis designed to allow themovement of solid wirelinein and out of the wellwithout allowing wellpressures to escape.

D-18

MANUAL STUFFING BOX (10,000 PSI WP)

The Wireline Stuffing Box is designedto allow the movement of solidwireline in and out of the well withoutallowing well pressures to escape.


MANUAL STUFFING BOXASSEMBLY 5,000 PSI WP 10,000 PSI WP

Part Number 58B0X005 58B0X010Unit Price 925.00 1505.00

COMPONENTSPacking Nut 58A00465 *58A00465

165.00 165.00

Body 58SB0000 58SB0014554.00 731.00

Upper Packing Gland 58A00583 *58A0058327.00 27.00

Lower Packing Gland 58A00582 58A0058235.00 35.00

Packing (7) 91ST0000 (7) 91ST00011.09 net ea. 1.67 net ea

Blow Plug 97A00612 97A0061240.00 net 40.00 net

Blow Plug Body 58A00464 58A00463173.00 173.00

Union Nut ******** 58A00466300.00

Staff Jam Nut 58SB0005 58SB0005104.00 104.00

10m Seal Protector Ring ******** 58A004505.00 net

10m Non-Extrusion Ring ******** 58A0045139.00 net

Please specify Line Size when ordering.

*When converting to hydraulic, the packing nut and the upper packing gland are omitted.

D-20

STAFF ASSEMBLY

The Staff Assembly is designed toalter the direction of the wireline intothe stuffing box using the same wheelas the Hay Pulley


STAFF ASSEMBLYASSEMBLY 7” 10” 16”

(Aluminum Sheave) 58ST0010Part Number 58ST0007 (Steel Sheave) 58ST0011 58ST0016Unit Price 1375.00 1500.00 1615.00

COMPONENTSStaff 58SB0017 58SB0001 58STF016

616.00 633.00 785.00

Bearing Housing 58SB0015 58SB0015 58SB0015Spacer 58SB0021 58SB0012 58SB0027Bracket 58SB0018 58SB0018 58SB0026Sheave Support 58SB0016 58SB0020 58SB0028Grease Zert 58SB0019 58SB0019 58SB0019Side Arm ******** ******** (2) 58SB0029

Sheave (Aluminum) 58SB000880HP0003 (Steel) 58SB0022 80HP0016

303.00 537.00 656.00

Bearing (2) 80HPB000 (2) 58SB0009 (2) 58SB000938.00 ea. 45.00 ea. 45.00 ea.

Sheave Bolt 80SHB003 80SHB003 80HP003243.00 43.00 3.00

Jam Nut 80SHB004 80SHB004 80HP00312.00 2.00 2.00

Washer (2) 58SB0010 ******** ********30.00 ea.

Bushing ******** (2) 58SB0003 (2) 58SB002532.00 ea. 32.00 ea.

Guard 58SB0011 58SB0007 58SB0031330.00 385.00 31.00

Guard Top Block ******** ******** 58SB0030110.00

Screw (3) 58SB0006 (3) 80LW0004 (3) 80LW00041.00 ea. 1.00 ea. 1.00 ea.

Staff Bearing (2) 58SB0004 (2) 58SB0004 (2) 58SB0004107.00 ea. 107.00 ea. 107.00 ea.

Bearing Block Bushing (2) 58SB0032 (2) 58SB0032 (2) 58SB003269.00 ea. 69.00 ea. 69.00 ea.

D-22

HYDRAULIC PACKING NUTThe Stuffing Box Hydraulic PackingNut allows you to operate the packingnut from a remote location forconvenience as well as a safer way topackoff the wireline.


HYDRAULIC PACKING NUTASSEMBLY 58SB0002

Unit Price 715.00

COMPONENTSPiston 58A00790

216.00

Body 58A00791298.00

Bottom Sub 58A00792105.00

Upper Gland 58A0079336.00

Spring 90A0151266.00

O-ring #222.85

O-ring #2101.00

Set Screw 1/4”-20 x 1/4”.25

D-24

HALLIBURTON STYLESTUFFING BOX

This is a Stuffing Box and Staff Assembly unit. TheWireline Stuffing Box is designed to allow themovement of solid wireline in and out of the wellwithout allowing well pressures to escape. TheStaff Assembly is designed to alter the direction ofthe wireline into the stuffing box using the samewheel as the Hay Pulley.


HALLIBURTON STYLE

ASSEMBLY 80SB0249Unit Price 2100.00

COMPONENTSBody 80SB0245

416.00

Bearing (2) 80SHB00162.00 ea.

Lower Gland 80SBL00031.00

Nut ********.55

Packing (3) 91ST00001.09 net ea.

Upper Gland 80SBU00027.00

Packing Nut 80SB0246216.00

Staff (Fork) 80SB02501150.00

Bearing Lock Nut 80SB0247105.00

Wheel (with bearings) 80HP0002360.00

Sheave Bolt 80SHB00343.00

Jam Nut 80SHB0042.00

STUFFING BOX

*Prices Subject to Change

D-26

QUICK UNIONQuick Unions are screwed onto Pup-Joints to form a Lubricator. They areused to attach sections of lubricatortogether to accommodate therequired tool string length. The QuickUnion is designed to hold pressureusing an o-ring type seal.


QUICK UNIONSIDENTIFICATION CHARTS

AAAAA BBBBB CCCCC DDDDD EEEEE100WOB64 4-"4/34 gnir-O043# 047.3 - 057.3 + "3-"2000WOB64 4-"2/15 gnir-O543# 573.4 - 583.4 + "3-"2

AAAAA BBBBB CCCCC DDDDD EEEEE0030TO64 4-"5 gnir-O833# 094.3 - 005.3 + "61/512-"2

D-28

QUICK UNIONSASSEMBLY 4 3/4”-4 4 3/4”-4 (L80)

2 3/8” EUE 2 3/8” EUEPart Number 46B0W238 46B0W238-L80Unit Price 995.00 995.00

COMPONENTSThreaded Half 46BN0238 46BN0238-L80

350.00 350.00

Pin Section 46BN2238 46BN2238-L80350.00 350.00

Nut 46BN3150 46BN3150300.00 300.00

O-ring #340 #340 (Viton)1.65 9.35

ASSEMBLY 4 3/4”-4 4 3/4”-4 (L80)2 7/8” EUE 2 7/8” EUE

Part Number 46B0W278 46B0W278-L80Unit Price 995.00 995.00


350.00 350.00


Nut 46BN3150 46BN3150300.00 300.00

O-ring #340 #340 (Viton)1.65 9.35

ASSEMBLY 4 3/4”-4 4 3/4”-4 (L80)3 1/2” 10RD NU 3 1/2” 10RD NU

Part Number 46B0W350 46B0W350-L80Unit Price 995.00 995.00


350.00 350.00


Nut 46BN3150 46BN3150300.00 300.00

O-ring #340 #340 (Viton)1.65 9.35


QUICK UNIONSASSEMBLY 5 1/2”- 4 5”- 4

Part Number 46B0W000 460T0300Unit Price 1695.00 995.00

COMPONENTSThreaded Half 46BN2350 460T1301

600.00 350.00

Pin Section 46BN1350 460T2301600.00 350.00

Nut 46BN3350 460T3301600.00 300.00

O-ring #345 #3381.85 1.65

UNION SPANNER WRENCHSIZE 4 1/2” - 6 1/4”Part Number 46B04560Unit Price 108.00

D-30



moc.tni-sloot.www




Prices effective June 1, 2012 1-800-338-0308 E-1

E

TOOL STRING EQUIPMENT

E-2

SINGLE STRAND ROPE SOCKET

The Single Strand Rope Socket is themeans used to attach single strandwireline with the wireline tool string.The spool type rope socket isrecommended for use with .066” -.092” line.

SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS"4/3 "4/3 "4/3 "4/3 "4/3 "8/7 "8/7 "8/7 "8/7 "8/7 "1"1"1"1"1 "4/11 "4/11 "4/11 "4/11 "4/11 "2/11 "2/11 "2/11 "2/11 "2/11 "4/31 "4/31 "4/31 "4/31 "4/31 "8/71 "8/71 "8/71 "8/71 "8/71 "8/12 "8/12 "8/12 "8/12 "8/12

.D.OkcenhsiF "886.0 "057.0 "578.0 "881.1 "573.1 "057.1 "057.1 "057.1.D.O.xaM "057.0 "578.0 "000.1 "052.1 "005.1 "057.1 "578.1 "521.2

noitcennoCdaerhT 31-"2/1 31-"2/1 11-"8/5 01-"61/51 01-"61/51 01-"61/11 01-"61/11 01-"61/11htgneL "886.5 "886.5 "526.5 "000.6 "000.6 "000.6 "000.6 "000.7


SINGLE STRAND ROPE SOCKETASSEMBLY 3/4” 7/8” 1” 1 1/4”

Part Number 43B01075 43B01078 43B01100 43B01125Unit Price 120.00 120.00 120.00 105.00

COMPONENTSBody ******** ******** 43B00440 43B00445

76.00 73.00

Spring ******** ******** 90B01169 90A0113322.00 11.00

Spool ******** ******** 43A00044 43A0034316.00 14.00

Thimble ******** ******** 43A00045 43A0034216.00 14.00

INCONEL SPRINGS (OPTIONAL)******** ******** ******** 90N02102

26.00

ASSEMBLY 1 1/2” 1 3/4” 1 7/8” 2 1/8”Part Number 43B01150 43B01175 43B01178 43B01213Unit Price 105.00 135.00 135.00 325.00


73.00 83.00 83.00 295.00

Spring 90A01133 90A01133 90A01133 90A0113311.00 11.00 11.00 11.00

Spool 43A00343 43A00343 43A00343 43A0034314.00 14.00 14.00 14.00

Thimble 43A00342 43A00342 43A00342 43A0034214.00 14.00 14.00 14.00

INCONEL SPRINGS (OPTIONAL)90N02102 90N02102 90N02102 90N02102

26.00 26.00 26.00 26.00

E-4

MULTI-STRAND ROPE SOCKET (SLIP TYPE)

The Multi-Strand Rope Socket is themeans used to attach multi-strandlines with the wireline tool string. Theslip type rope socket is designed foruse with small stranded lines upthrough 3/16” diameter.

SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS"4/11 "4/11 "4/11 "4/11 "4/11 "2/11 "2/11 "2/11 "2/11 "2/11 "4/31 "4/31 "4/31 "4/31 "4/31 "8/71 "8/71 "8/71 "8/71 "8/71

.D.OkcenhsiF "881.1 "573.1 "057.1 "057.1.D.O.xaM "052.1 "005.1 "057.1 "578.1

noitcennoCdaerhT 01-"61/51 01-"61/51 01-"61/11 01-"61/11htgneLllarevO "057.8 "000.9 "881.9 "881.9

wercSteS "61/5x61-"8/3 "61/5x61-"8/3 "61/5x61-"8/3 "61/5x61-"8/3


MULTI-STRAND ROPE SOCKET(CLAMP TYPE)

The Multi-Strand Rope Socket is themeans used to attach multi-strandlines with the wireline tool string. Theclamp type rope socket is designedfor use with small stranded lines upthrough 3/16” diameter.

SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS"2/11 "2/11 "2/11 "2/11 "2/11 "4/31 "4/31 "4/31 "4/31 "4/31 "8/71 "8/71 "8/71 "8/71 "8/71

.D.OkcenhsiF "573.1 "057.1 "057.1.D.O.xaM "005.1 "057.1 "578.1

noitcennoCdaerhT 01-"61/51 01-"61/11 01-"61/11htgneLllarevO "313.8 "964.9 "964.9

swercSdaeHtekcoS "2/1x82-"4/1 "8/5x82-"4/1 "8/5x82-"4/1

E-6

MULTI-STRAND ROPE SOCKETSLIP TYPE

ASSEMBLY 1 1/4” 1 1/2” 1 3/4” 1 7/8”Part Number 43MS0125 43MS0150 43MS0175 43MS0178Unit Price 405.00 405.00 485.00 485.00

COMPONENTSBody 43A00355 43A00360 43A00365 43A00370

184.00 184.00 262.00 262.00

Lower Sub 43A00356 43A00361 43A00366 43A0037199.00 99.00 99.00 99.00

Plug (Carriage) 43BW9125 43BW9150 43BW9150 43BW9150151.00 151.00 151.00 151.00

Slip (2) 43BW8125 (2) 43BW8150 (2) 43BW8150 (2) 43BW815034.00 ea. 34.00 ea. 34.00 ea. 34.00 ea.

CLAMP TYPE

ASSEMBLY 1 1/2” 1 3/4” 1 7/8”Part Number 43MS1150 43MS1175 43MS1178Unit Price 575.00 690.00 690.00

COMPONENTSBody 43A00375 43A00390 43A00380

264.00 381.00 381.00

Lower Sub 43A00376 43A00391 43A00381143.00 143.00 143.00

Clamp 43B00380 43B00381 43B00381259.00 259.00 259.00


MULTI-STRAND ROPE SOCKET(BRASS WEDGE)

The Brass Wedge Multi-Stand Rope Socket is usedas a means of connectingthe wireline to the wirelinetool string. The line is runthrough the body and aroundthe brass wedge. With theline set in the providedgroove of the brass wedge,the line and brass wedge arepulled tightly into the taperof the body.




E-8

MULTI-STRAND ROPE SOCKET

FOR 3/16” LINE

ASSEMBLY 1 1/4” 1 1/2” 1 3/4” 1 7/8”Part Number 43BWMS12-187 43BWMS15-187 43BWMS17-187 43BWMS18-187Unit Price 405.00 405.00 485.00 485.00


184.00 184.00 262.00 262.00

Lower Sub 43A00356 43A00361 43A00366 43A0037199.00 99.00 99.00 99.00

Brass Wedge 43BWMS01 43BWMS04 43BWMS04 43BWMS04218.00 218.00 218.00 218.00

FOR 7/32” LINE



184.00 184.00 262.00 262.00

Lower Sub 43A00356 43A00361 43A00366 43A0037199.00 99.00 99.00 99.00


(BRASS WEDGE)


MULTI-STRAND ROPE SOCKET

FOR 1/4” LINE



184.00 184.00 262.00 262.00

Lower Sub 43A00356 43A00361 43A00366 43A0037199.00 99.00 99.00 99.00


FOR .160 LINE



184.00 184.00 262.00 262.00

Lower Sub 43A00356 43A00361 43A00366 43A0037199.00 99.00 99.00 99.00


(BRASS WEDGE)

E-10

BRASS WEDGE & SLEEVE TYPEROPE SOCKET

The Brass Wedge and Sleeve TypeRope Socket is used as a means ofconnecting the wireline to the wirelinetool string. The line is run through thebody and sleeve and around thebrass wedge. With the line set in theprovided groove of the brass wedge,the line and brass wedge are pulledtightly into the taper of the sleeve.




niPlloR "4/11x"61/3 "2/11x"61/3 "4/31x"61/3 "4/31x"61/3

Prices effective June 1, 2012 1-800-338-0308 E-1 1

BRASS WEDGE & SLEEVE TYPEROPE SOCKET

FOR .092” WIREASSEMBLY 1 1/4” 1 1/2” 1 3/4” 1 7/8”

Part Number 43BWS125 43BWS150 43BWS175 43BWS178Unit Price 215.00 230.00 240.00 240.00


73.00 73.00 83.00 83.00

Brass Wedge 43B00504 43B00504 43B00504 43B0050463.00 63.00 63.00 63.00

Sleeve 43B00505 43B00505 43B00505 43B0050571.00 71.00 71.00 71.00

FOR .108”/.125” WIRE

ASSEMBLY 1 1/4” 1 1/2” 1 3/4” 1 7/8”Part Number 43BWS225 43BWS250 43BWS275 43BWS278Unit Price 215.00 230.00 240.00 240.00


73.00 73.00 83.00 83.00

Brass Wedge 43B00506 43B00506 43B00506 43B0050663.00 63.00 63.00 63.00

Sleeve 43B00505 43B00505 43B00505 43B0050571.00 71.00 71.00 71.00

E-12

BRASS WEDGE ROPE SOCKET

The Brass Wedge RopeSocket is used as a means ofconnecting the wireline to thewireline tool string. The line isrun through the body andaround the brass wedge. Withthe line set in the providedgroove of the brass wedge, theline and brass wedge arepulled tightly into the taper ofthe body.



noitcennoCdaerhT 01-"61/51 01-"61/51 01-"61/11 01-"61/11htgneLllarevO "052.5 ""318.4 "521.5 "521.5


BRASS WEDGE ROPE SOCKETFOR .072-.092” WIRE

ASSEMBLY 1 1/4” 1 1/2” 1 3/4” 1 7/8”Part Number 43BW2125 43BW2150 43BW2175 43BW2178Unit Price 175.00 175.00 205.00 205.00


141.00 141.00 164.00 164.00

Brass Wedge 43BW0002 43BW0002 43BW0002 43BW000238.00 38.00 38.00 38.00

FOR .108” WIRE



141.00 141.00 164.00 164.00


FOR 3/16” WIRE



141.00 141.00 164.00 164.00


E-14

STEM

The Wireline Stem, also called aweight bar, is used to add weight tothe wireline tool string to counteractthe wellbore pressure allowing theeasy descent of the tool string. It isalso used to increase theeffectiveness of jarring operations.

SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS"4/3 "4/3 "4/3 "4/3 "4/3 "1"1"1"1"1 "4/11 "4/11 "4/11 "4/11 "4/11 "2/11 "2/11 "2/11 "2/11 "2/11 "4/31 "4/31 "4/31 "4/31 "4/31 "8/71 "8/71 "8/71 "8/71 "8/71 "8/12 "8/12 "8/12 "8/12 "8/12

.D.OkcenhsiF "886.0 "578.0 "881.1 "573.1 "057.1 "057.1 "057.1.D.O.xaM "057.0 "000.1 "052.1 "005.1 "057.1 "578.1 "521.2

snoitcennoCxoB&niP 31-"2/1 11-"8/5 01-"61/51 01-"61/51 01-"61/11 01-"61/11 01-"61/11

htgneLpUedaM'2 "000.42 "000.42 "000.42 "000.42 "000.42 "000.42 "000.42'3 "000.63 "000.63 "000.63 "000.63 "000.63 "000.63 "000.63'5 "000.06 "000.06 "000.06 "000.06 "000.06 "000.06 "000.06


STEMLENGTH 2’ 3’ 5’SIZE

3/4” 44S02075 44S03075 44S0507590.00 110.00 115.00

1” 44S02100 44S03100 44S05100110.00 115.00 140.00

1 1/4” 44S02125 44S03125 44S05125125.00 140.00 150.00

1 1/2” 44S02150 44S03150 44S05150140.00 150.00 165.00

1 3/4” 44S02175 44S03175 44S05175165.00 165.00 205.00

1 7/8” 44S02178 44S03178 44S05178165.00 185.00 230.00

2 1/8” 44S02213 44S03213 44S05213165.00 200.00 245.00

E-16

ROLLER STEMThe Roller Stem is incorporated intothe wireline tool string to facilitatemaneuverability within the tubing. Therollers on the stem also allow the toolstring to move easier throughdeviated tubing.

LENGTH 2’ 3’ 5’SIZE

1 1/4” 44RS2125 44RS3125 44RS5125625.00 640.00 655.00

1 1/2” 44RS2150 44RS3150 44RS5150735.00 745.00 765.00

1 3/4” 44RS2175 44RS3175 44RS5175805.00 820.00 860.00

1 7/8” 44RS2178 44RS3178 44RS5178810.00 825.00 880.00



snoitcennoCxoB&niP 01-"61/51 01-"61/51 01-"61/11 01-"61/11.D.OsrelloR "834.1 "448.1 "526.2 "526.2

niPlloR "4/11x"8/3 "2/11x"8/3 "4/31x"8/3 "4/31x"8/3

htgneLpUedaM'2 "000.42 "000.42 "000.42 "000.42'3 "000.63 "000.63 "000.63 "000.63'5 "000.06 "000.06 "000.06 "000.06




moc.tni-sloot.www




E-18

KNUCKLE JOINTThe Knuckle Joint is designed forapplications where tool string rotationand/or deflection is required. It ismost useful in fishing operationswhere the pulling tool or overshotrequires flexibility to properly locatethe fish.

SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS"4/3 "4/3 "4/3 "4/3 "4/3 "8/7 "8/7 "8/7 "8/7 "8/7 "1"1"1"1"1 "4/11 "4/11 "4/11 "4/11 "4/11 "2/11 "2/11 "2/11 "2/11 "2/11 "4/31 "4/31 "4/31 "4/31 "4/31 "8/71 "8/71 "8/71 "8/71 "8/71 "8/12 "8/12 "8/12 "8/12 "8/12

.D.OkcenhsiF "886.0 "886.0 "578.0 "881.1 "573.1 "057.1 "057.1 "057.1.D.O.xaM "057.0 "578.0 "000.1 "052.1 "005.1 "057.1 "578.1 "521.2xoB&niP

snoitcennoC 31-"2/1 31-"2/1 11-"8/5 01-"61/51 01-"61/51 01-"61/11 01-"61/11 01-"61/11

pUedaMhtgneL "834.4 "834.4 "052.5 "313.7 "000.9 "521.9 "521.9 "521.9


KNUCKLE JOINTSIZE 3/4” 7/8” 1” 1 1/4”Part Number 45B01075 45B01078 45B01100 45B01125Unit Price 165.00 200.00 200.00 200.00

SIZE 1 1/2” 1 3/4” 1 7/8” 2 1/8”Part Number 45B01150 45B01175 45B01178 45B02125Unit Price 205.00 300.00 300.00 425.00

HYDRAULIC OIL JARThe Hydraulic Wireline Jar is designed to give the wireline operator controlover jarring intensity during wireline operations. This is accomplished throughits unique body design and integral inner mandrel that allows the jar to bereset easily following each jarring cycle.

SIZE 1 1/4” 1 1/2” 1 3/4” 2 1/8”Part Number 19JR0125 19JR0150 19JR0175 19JR0213Unit Price ******** ******** ******** ********

REPLACEMENT PARTSMain Mandrel 19B01276 19B00991 19B00990 19B00989

Piston 19B01073 19B01075 19B01074 ********

O-Ring Kit 19KIT125 19KIT150 19KIT175 19KIT213

Fill Plug 19B00995 19B00995 19B00995 ********

* Prices Available Upon Request

E-20

SWIVEL JOINTThe Swivel Joint is designed to assistin the changing of components in thewireline tool string. The swivel designallows the operator to change outlong sections without having tophysically rotate them. The swiveljoint also allows the tool string tomore freely spin and/or rotatedownhole to prevent line twist.

SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS"2/11 "2/11 "2/11 "2/11 "2/11 "4/31 "4/31 "4/31 "4/31 "4/31

.D.OkcenhsiF "573.1 "057.1.D.O.xaM "005.1 "057.1

snoitcennoCxoB&niP 01-"61/51 01-"61/11htgneLpUedaM "526.9 "365.01

niPlloR "881.1x"8/1 "365.1x"8/1


SWIVEL JOINTASSEMBLY 1 1/2” 1 3/4”

Part Number 44SW1500 44SW1750Unit Price 715.00 715.00

COMPONENTSFishneck 44SW1501 44SW1751

220.00 220.00

Core Bolt 44SW1502 44SW175248.00 54.00

Housing 44SW1503 44SW1753220.00 220.00

Bottom Sub 44SW1504 44SW1754220.00 220.00

Bearing 44SW1505 44SW175527.00 27.00

Bearing Seal 44SW1506 44SW175611.00 11.00

E-22

KNUCKLE JARThe Knuckle Jar provides a range ofmotion that helps to make the toolstring more flexible. Because theKnuckle Jar has a stroke, it can alsobe used for light jarring.



snoitcennoCxoB&niP 01-"61/51 01-"61/51 01-"61/11

htgneLpUedaM"3

desolC "005.31 "005.31 "005.31denepO "005.61 "005.61 "005.61

"5desolC "005.51 "005.51 "005.51denepO "005.02 "005.02 "005.02

sniPlloR "4/11x"8/1 "2/11x"8/1 "8/71x"8/1


KNUCKLE JAR3” STROKE

ASSEMBLY 1 1/4” 1 1/2” 1 7/8”Part Number 44KJ0125 44KJ0150 44KJ0178Unit Price 400.00 400.00 465.00

COMPONENTSStroke Rod 44B01234 44B01228 44B01230

96.00 96.00 106.00

Top Sub 44B01236 44B01225 44B01231118.00 118.00 130.00

Ball Housing 44B01235 44B01227 44B01232159.00 159.00 173.00

Lower Sub 44B01237 44B01226 44B0123380.00 80.00 96.00

5” STROKE

ASSEMBLY 1 1/4” 1 1/2” 1 7/8”Part Number 44KJ1125 44KJ1150 44KJ1178Unit Price 400.00 400.00 465.00

COMPONENTSStroke Rod 44B01238 44B01224 44B01240

96.00 96.00 106.00

Top Sub 44B01236 44B01225 44B01231118.00 118.00 130.00

Ball Housing 44B01239 44B01223 44B01241159.00 159.00 173.00

Lower Sub 44B01237 44B01226 44B0123380.00 80.00 96.00

E-24

TUBULAR JARThe Tubular Jar, through wirelinemanipulation, can be used to providean upward or downward impact. Theintensity of the jarring impactdepends on the weight of the wirelinestem above the jar, the stroke lengthof the jar, and the density of the wellfluid. The perforated body of theTubular Jar allows fluid bypass,reducing the effects of the well fluiddensity on the jarring impact.

SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS"4/3 "4/3 "4/3 "4/3 "4/3 "8/7 "8/7 "8/7 "8/7 "8/7 "1"1"1"1"1 "4/11 "4/11 "4/11 "4/11 "4/11

.D.OkcenhsiF "886.0 "057.0 "578.0 "881.1.D.O.xaM "057.0 "578.0 "000.1 "052.1xoB&niP

snoitcennoC 31-"2/1 31-"2/1 11-"8/5 01-"61/51

htgneLpuedaM)desolC( "318.02 "318.02 "834.13 "365.23

htgneLpUedaM)denepO( "318.43 "318.43 "834.15 "365.25

niPgnikcoLleetS "4/3x"8/1 "8/7x"8/1 "1x"8/1 "4/11x"8/1

"2/11 "2/11 "2/11 "2/11 "2/11 "4/31 "4/31 "4/31 "4/31 "4/31 "8/71 "8/71 "8/71 "8/71 "8/71 "8/12 "8/12 "8/12 "8/12 "8/12.D.OkcenhsiF "573.1 "057.1 "057.1 "057.1

.D.O.xaM "005.1 "057.1 "578.1 "521.2xoB&niP

snoitcennoC 01-"61/51 01-"61/11 01-"61/11 01-"61/11

htgneLpuedaM)desolC( "365.23 "365.23 "365.23 "886.23

htgneLpUedaM)denepO( "365.25 "365.25 "365.25 "886.25

niPgnikcoLleetS "2/11x"8/1 "4/31x"8/1 "8/71x"8/1 "8/12x"8/1


TUBULAR JARASSEMBLY 3/4” 7/8” 1” 1 1/4”

Part Number 44TUB075 44TUB078 44TUB100 44TUB125Unit Price 395.00 395.00 395.00 430.00

COMPONENTSFishneck 44B00003 44B00012 44B01340 44A00020

108.00 108.00 108.00 119.00

Body 44B00004 44B00013 44B01341 44B00022146.00 146.00 146.00 156.00

Stroke Rod 44B00005 44B00005 44B01339 44B00021136.00 136.00 136.00 146.00

Upper Stop 44B00006 44B00015 44B01338 44A0001849.00 49.00 49.00 61.00

Lower Stop 44B00007 44B00016 44B01337 44A0001961.00 61.00 61.00 69.00

ASSEMBLY 1 1/2” 1 3/4” 1 7/8” 2 1/8”Part Number 44TUB150 44TUB175 44TUB187 44TUB213Unit Price 475.00 525.00 605.00 915.00

COMPONENTSFishneck 44B00093 44A00606 44B00190 44B00201

128.00 136.00 117.00 193.00

Body 44B00096 44A00608 44B00192 44B00204164.00 176.00 241.00 259.00

Stroke Rod 44B00095 44A00605 44A00605 44B00198156.00 164.00 164.00 204.00

Upper Stop 44A00090 44A00607 44B00191 44B0020261.00 117.00 117.00 146.00

Lower Stop 44A00091 44A00609 44B00193 44B0020369.00 80.00 80.00 136.00

E-26

SPANG LINK JARThe Mechanical Link Jar, throughwireline manipulation, can be used toprovide an upward or downwardimpact. The intensity of the jarringimpact depends on the weight of thewireline stem above the jar, thestroke length of the jar, and thedensity of the well fluid.

SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS"1"1"1"1"1 "4/11 "4/11 "4/11 "4/11 "4/11 "2/11 "2/11 "2/11 "2/11 "2/11 "4/31 "4/31 "4/31 "4/31 "4/31 "8/71 "8/71 "8/71 "8/71 "8/71 "8/12 "8/12 "8/12 "8/12 "8/12 "2/12 "2/12 "2/12 "2/12 "2/12 "4/32 "4/32 "4/32 "4/32 "4/32

.D.OkcenhsiF "000.1 "881.1 "573.1 "057.1 "057.1 "057.1 "313.2 "313.2

.D.O.xaM "000.1 "052.1 "005.1 "057.1 "578.1 "521.2 "005.2 "057.2

snoitcennoCxoB&niP 11-"8/5 01-"61/51 01-"61/51 01-"61/11 01-"61/11 01-"61/11 01-"61/91 01-"61/91

htgneLpuedaM)desolC(

"41 "052.53 ***** ***** ***** ***** ***** ***** *****

"81 "052.93 ***** ***** ***** ***** ***** ***** *****

"02 ***** "000.34 "000.34 "000.34 "000.05 "000.05 "000.05 "000.05

"03 ***** "000.65 "000.65 "000.65 "000.65 "000.65 "000.65 "000.65

htgneLpUedaM)denepO(

"41 "000.35 ***** ***** ***** ***** ***** ***** *****

"81 "000.75 ***** ***** ***** ***** ***** ***** *****

"02 ***** "000.36 "000.36 "000.36 "000.07 "000.07 "000.07 "000.07

"03 ***** "000.68 "000.68 "000.68 "000.68 "000.68 "000.68 "000.68


SPANG LINK JARSTROKE 14” 18” 20” 30”SIZE

1” 44SG2100 44SG3100 ******** ********435.00 465.00

1 1/4” ******** ******** 44SG1125 44SG2125440.00 515.00

1 1/2” ******** ******** 44SG2150 44SG3150440.00 515.00

1 3/4” ******** ******** 44SG2175 44SG3175535.00 570.00

1 7/8” ******** ******** 44SG2178 44SG3178535.00 580.00

2 1/8” ******** ******** 44SG2213 44SG32131505.00 1840.00

2 1/2” ******** ******** 44SG2250 44SG32501560.00 1890.00

2 3/4” ******** ******** 44SG2275 44SG32752090.00 2400.00

E-28

CROSSOVER SUBSThe Crossover Sub is designed to connect components of the tool string thathave different size thread connections.

SUCKER ROD CROSSOVER SUBS

62A00888 3/4” SR Box x 3/4” SR Box 115.0062A00889 3/4” SR Pin x 3/4” SR Pin 115.0062A00894 5/8” SR Box x 5/8” SR Box 115.0062A00890 5/8” SR Pin x 5/8” SR Pin 115.0062A00893 3/4” SR Box x 5/8” SR Pin 115.0062A00898 3/4” SR Pin x 5/8” SR Box 115.0062B00974 Amerada Pin x 5/8” SR Box 115.0062B00975 Amerada Box x 5/8” SR Pin 115.00

SUCKER ROD THREAD CHASERS*

95TC6702 5/8” 215.0095TC6704 3/4” 235.0095TC6710 5/8” x 3/4” 330.00

*Prices Subject to change


BLIND BOX

SIZE 3/4” 1” 1 1/4” 1 1/2”Part Number 44BB0075 44BB0100 44BB0125 44BB0150Unit Price 135.00 135.00 135.00 135.00

SIZE 2” 2 1/2” 3” 4”Part Number 44BB0200 44BB0250 44BB0300 44BB0400Unit Price 140.00 185.00 200.00 245.00

SIZE 5” 6”Part Number 44BB0500 44BB0600Unit Price 275.00 385.00

The Blind Box is a one piece wirelinetool made from solid bar alloy steelthat has a fishneck and threads onone end, to facilitate attachment tothe wireline string, and a flat bottomon the other end for delivering blows.The Blind Box is actually used as adownhole “hammer,” striking objectsor debris with jarring force.

SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS"4/3 "4/3 "4/3 "4/3 "4/3 "1"1"1"1"1 "4/11 "4/11 "4/11 "4/11 "4/11 "2/11 "2/11 "2/11 "2/11 "2/11 "2"2"2"2"2

.D.OkcenhsiF "886.0 "578.0 "881.1 "881.1 "573.1.D.O.xaM "057.0 "000.1 "052.1 "005.1 "057.1

noitcennoCniP 31-"2/1 11-"8/5 01-"61/51 01-"61/51 01-"61/51htgneLpUedaM "573.8 "052.8 "000.8 "578.8 "578.8

"2/12 "2/12 "2/12 "2/12 "2/12 "3"3"3"3"3 "4"4"4"4"4 "5"5"5"5"5 "6"6"6"6"6.D.OkcenhsiF "573.1 "057.1 "057.1 "313.2 "313.2

.D.O.xaM "052.2 "526.2 "917.3 "052.4 "057.5

noitcennoCniP 01-"61/51 01-"61/11 01-"61/11 01-"61/11 01-"61/11

htgneLpUedaM "578.9 "578.9 "000.9 "000.9 "578.01

E-30

TUBING CENTRALIZER

SIZE 2” 2 1/2” 3”Part Number 65TC0200 65TC0250 65TC0300Unit Price 280.00 295.00 305.00

The Tubing Centralizer is used tohelp keep the tool string in the centerof the tubing. The diameter ismachined near the tubing driftspecification. Fluid bypass slots aremachined to assist the tool stringdownhole.



snoitcennoCxoB&niP 01-"61/51 01-"61/51 01-"61/11htgneLpUedaM "000.01 "000.01 "000.01


TUBING SWEDGE

SIZE 1 1/4” 1 1/2” 2”Part Number 65TS0125 65TS0150 65TS0200Unit Price 175.00 200.00 230.00

SIZE 2 1/2” 3” 4”Part Number 65TS0250 65TS0300 65TS0400Unit Price 290.00 355.00 505.00

The Tubing Swedge is used to bendout irregular places and otherobstructions wihin the tubing string. Itis equipped with a central bore andangled fluid ports for ample fluidbypass. The Swedge can also bemanufactured per customer specifiedO.D.

SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS"4/11 "4/11 "4/11 "4/11 "4/11 "2/11 "2/11 "2/11 "2/11 "2/11 "2"2"2"2"2 "2/12 "2/12 "2/12 "2/12 "2/12 "3"3"3"3"3 "4"4"4"4"4

.D.OkcenhsiF "000.1 "881.1 "573.1 "573.1 "057.1 "313.2.D.O.xaM "032.1 "135.1 "609.1 "343.2 "068.2 "078.3

noitcennoCniP 11-"8/5 01-"61/51 01-"61/51 01-"61/51 01-"61/11 01-"61/11htgneLpUedaM "052.6 "000.7 "000.8 "052.9 "052.9 "052.9

E-32

TUBING CENTRALIZER (TEFLON)

SIZE 2” 2 1/2” 3”Part Number 65TC1200 65TC1250 65TC1300Unit Price 415.00 435.00 465.00

The Teflon Centralizer is used to helpkeep the tool string in the center ofcoated tubing. The diameter ismachined near the tubing driftspecification. Fluid bypass slots aremachined to assist the tool stringdownhole.




wercSteS "4/1x02-"4/1 "4/1x02-"4/1 "8/3x02-"4/1




moc.tni-sloot.www




E-34

ADJUSTABLE BOW SPRINGCENTRALIZER

The Adjustable Wireline Centralizercomes in two models, one with arange from 1 1/2” to 8 1/2” O.D., andone with a range from 1 7/8” to 9”O.D. Through the use of anadjustment nut and coil spring, theO.D. of the centralizer springs can beadjusted to fit your specificapplication.

SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS"2/11 "8/71

.D.OkcenhsiF "573.1 "573.1

snoitcennoCxoB&niP 01-"61/51 01-"61/51

.D.O.xaM "005.1 "578.1

egnaRgnirpSwoB "2/18ot"2/11 "9ot"8/71

htgneLpUedaM "057.54 "057.54

swercSteSgnikcoL "4/1x02-"4/1)3( "4/1x02-"4/1)3(

swercSteSgnitsujdA "61/3x02-"4/1)2( "61/3x02-"4/1)2(


ADJUSTABLE BOW SPRINGCENTRALIZER

ASSEMBLY 1 1/2” 1 7/8”Part Number 65AC0150 65AC0178Unit Price 1465.00 1940.00

COMPONENTSTop Sub 65AC1501 65AC1507

195.00 347.00

Spring Carrier (2) 65AC1502 (2) 65AC1508232.00 ea. 332.00 ea

Spring Retainer (2) 65AC1503 (2) 65AC1509117.00 ea. 167.00 ea.

Bottom Sub 65AC1504 65AC1510174.00 245.00

Mandrel 65AC1505 65AC1511174.00 390.00

Adjusting Nut 65AC1506 65AC151297.00 141.00

Bow Spring (4) 90B00452 (4) 90B0045273.00 ea. 73.00 ea.

Coil Spring (2) 90A02002 (2) 90A0200331.00 ea. 45.00 ea.

E-36

PARAFFIN SCRATCHERThe Paraffin Scratcher is designed toscratch paraffin and scale from theI.D. of tubing by placing pieces ofwireline, cut to specific lengths andthreaded through a number of spirallydrilled holes, along its 5/8” diameterbody and running it up and downinside the tubing.

SIZE 2”- 3”Part Number 65SCR125Unit Price 215.00


.D.OkcenhsiF "881.1 "881.1 "881.1noitcennoCniP 01-"61/51 01-"61/51 01-"61/51htgneLpUedaM "000.22 "000.22 "000.22


TAR BABY

SIZE 1 3/4” 2” 2 1/4” 2 1/2”Part Number 52TB0175 52TB0200 52TB0225 52TB0250Unit Price 260.00 260.00 275.00 275.00

TO REPOUR............................................................................................................85.00 NET

The Tar Baby is used to retrieve smallparticles from the tubing that can notbe retrieved with a magnet assembly.

SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS"4/31 "4/31 "4/31 "4/31 "4/31 "2"2"2"2"2 "4/12 "4/12 "4/12 "4/12 "4/12 "2/12 "2/12 "2/12 "2/12 "2/12


noitcennoCniP 01-"61/51 01-"61/51 01-"61/51 01-"61/11htgneLpUedaM "005.4 "005.4 "000.5 "005.5

E-38

PARAFFIN CUTTERThe Paraffin Cutter (Gauge Ring) hasmany different purposes. It can beused to calibrate tubing, locatelanding nipples, and remove paraffinand other deposits from the tubingwall.

SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS"4/11 "4/11 "4/11 "4/11 "4/11 "2/11 "2/11 "2/11 "2/11 "2/11 "4/31 "4/31 "4/31 "4/31 "4/31 "2"2"2"2"2



"2/12 "2/12 "2/12 "2/12 "2/12 "3"3"3"3"3 "4"4"4"4"4 "5"5"5"5"5 "6"6"6"6"6.D.OkcenhsiF "573.1 "057.1 "313.2 "313.2 "313.2

.D.O.xaM "743.2 "609.2 "059.3 "065.4 "589.5noitcennoCniP 01-"61/51 01-"61/11 01-"61/11 01-"61/11 01-"61/91htgneLpUedaM "005.8 "005.8 "005.9 "005.9 005.01


SIZE 1 1/4” 1 1/2” 1 3/4”Part Number 65GAG125 65GAG150 65GAG175Unit Price 260.00 230.00 230.00

SIZE 2” 2 1/2” 3”Part Number 65GAG200 65GAG250 65GAG300Unit Price 255.00 330.00 440.00

SIZE 4” 5” 6”Part Number 65GAG400 65GAG500 65GAG600Unit Price 720.00 820.00 940.00

PARAFFIN CUTTER

E-40

SIZE 1” 1 1/4” 1 1/2” 2”Part Number 52IMP100 52IMP125 52IMP150 52IMP200Unit Price 155.00 155.00 155.00 185.00

SIZE 2 1/2” 3” 4”Part Number 52IMP250 52IMP300 52IMP400Unit Price 215.00 355.00 380.00

IMPRESSION BLOCKThe Impression Block consists of asteel housing with a lead insert.Impression Blocks are used duringfishing operations to determine theshape, size, and position of theobject being fished.

SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS"1"1"1"1"1 "4/11 "4/11 "4/11 "4/11 "4/11 "2/11 "2/11 "2/11 "2/11 "2/11 "2"2"2"2"2 "2/12 "2/12 "2/12 "2/12 "2/12 "3"3"3"3"3 "4"4"4"4"4

.D.OkcenhsiF "578.0 "881.1 "881.1 "573.1 "573.1 "057.1 "313.2.D.O.xaM "000.1 "052.1 "005.1 "057.1 "052.2 "526.2 "057.3

noitcennoCniP 11-"8/5 01-"61/51 01-"61/51 01-"61/51 01-"61/51 01-"61/11 01-"61/11htgneLpuedaM "052.5 "005.5 "005.5 "000.6 "000.6 "000.6 "005.6


TUBING BROACHThe Tubing Broach is used to cutburrs in the tubing I.D. caused byperforation, rust, bent tubing, etc.

SIZE 2 1/2” 3”Part Number 65B01250 65B01300Unit Price 750.00 825.00

SIZE 1 1/2” 2 1/16” 2”Part Number 65B01150 65B01175 65B01200Unit Price 630.00 630.00 630.00

SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS"2/11 "2/11 "2/11 "2/11 "2/11 "61/12 "61/12 "61/12 "61/12 "61/12 "2"2"2"2"2 "2/12 "2/12 "2/12 "2/12 "2/12 "3"3"3"3"3



E-42

SIDEWALL CUTTERThe purpose of the Sidewall Cutter isto cut the wireline at any desiredpoint in the tubing string. It can alsobe run all the way to the rope socketof a tool string which may be stuck inthe hole.The Sidewall Cutter Running Tool isused to run the Sidewall Cutter to itsdesired depth.

LOOTGNINNUR-SNOITACIFICEPS LOOTGNINNUR-SNOITACIFICEPS LOOTGNINNUR-SNOITACIFICEPS LOOTGNINNUR-SNOITACIFICEPS LOOTGNINNUR-SNOITACIFICEPS"2"2"2"2"2 "2/12 "2/12 "2/12 "2/12 "2/12 "3"3"3"3"3


niPleetS "61/31x"4/1 "2/11x"4/1 "2x"4/11



detcarteRsevinK "547.1 "002.2 "917.2dednapxEsevinK "360.2 "005.2 "000.3


SIDEWALL CUTTERASSEMBLY 2” 2 1/2” 3”

Part Number 47SW1200 47SW1250 47SW1300Unit Price 3215.00 3490.00 5680.00

COMPONENTSLower Knife (2) 47B00940 (2) 47A00602 (2) 47A00637

469.00 ea. 527.00 ea. 785.00 ea.

Upper Knife (2) 47B00941 (2) 47A00601 (2) 47A00636476.00 ea. 469.00 ea. 770.00 ea.

Slip Carrier 47A00631 47A00603 47A00639360.00 405.00 662.00

Split Ring (2) 47A00632 (2) 47A00606 (2) 47A0064096.00 ea. 102.00 ea. 159.00 ea.

Guide 47B00942 47A00600 47A00641271.00 321.00 571.00

Mandrel 47B00633 47A00604 47A00635698.00 796.00 1323.00

Keeper Ring 47A00630 47A00605 47A0063838.00 55.00 79.00

SIDEWALL CUTTER RUNNING TOOLSIZE 2” 2 1/2” 3”Part Number 41SW0000 41SW0500 41SW0300Unit Price 185.00 240.00 275.00

E-44

WIRELINE GRAB (2-PRONG)

SIZE 1 1/4” 1 1/2” 2”Part Number 52GRB125 52GRB150 52GRB200Unit 265.00 265.00 315.00

SIZE 2 1/2” 3”Part Number 52GRB250 52GRB300Unit Price 330.00 385.00

The Two Prong Wireline Grab is usedto retrieve broken wire from thetubing string. The arms includewelded barbs which catch the wire.

SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS"4/11 "4/11 "4/11 "4/11 "4/11 "2/11 "2/11 "2/11 "2/11 "2/11 "2"2"2"2"2 "2/12 "2/12 "2/12 "2/12 "2/12 "3"3"3"3"3





SIZE 1 1/2” 2” 2 1/2” 3”Part Number 52GR3150 52GR3200 52GR3250 52GR3300Unit Price 345.00 400.00 420.00 480.00

The Three Prong Wireline Grab isused to retrieve broken wire from thetubing string. The arms includewelded barbs which catch the wire.

SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS"2/11 "2/11 "2/11 "2/11 "2/11 "2"2"2"2"2 "2/12 "2/12 "2/12 "2/12 "2/12 "3"3"3"3"3



E-46


SIZE 2” 2 1/2” 3”Part Number 52GR4200 52GR4250 52GR4300Unit Price 330.00 420.00 480.00

The Four Prong Wireline Grab isused to retrieve broken wire from thetubing string. The arms includewelded barbs which catch the wire.



noitcennoCniP 01-"61/51 01-"61/51 01-"61/11htgneLpUedaM "834.02 "057.02 "000.12


CENTER SPEAR

SIZE 2” 2 1/2”Part Number 52CS0200 52CS0250Unit Price 255.00 255.00

The Center Spear is made by weldingbarbs on a pointed rod. It is mostcommonly used when the wire isballed up and stuck in the tubing. Itcan be driven into the tangled wire toloosen it and facilitate the use of atwo prong wire grab for final wireretrieval.


.D.OkcenhsiF "881.1 "881.1noitcennoCniP 01-"61/51 01-"61/51htgneLpUedaM "000.22 "000.22

E-48

WIREFINDERThe Wirefinder with Top Sub is usedto bend or ball the uppermost part ofthe wire so that retrievingapplications may be used.

-SNOITACIFICEPS -SNOITACIFICEPS -SNOITACIFICEPS -SNOITACIFICEPS -SNOITACIFICEPSBUSPOTDEDNETXE BUSPOTDEDNETXE BUSPOTDEDNETXE BUSPOTDEDNETXE BUSPOTDEDNETXE

"2"2"2"2"2.D.OkcenhsiF "573.1

.D.O.xaM "318.1noitcennoCniP 01-"61/51htgneLpUedaM "000.51





SOLID WIREFINDERThe Solid Wirefinder is used to bendor ball the uppermost part of the wireso that retrieving applications may beused.




E-50

SOLID WIREFINDERSIZE 2” 2 1/2” 3”Part Number 52WF1200 52WF1250 52WF1300Unit Price 240.00 265.00 310.00

ASSEMBLY 2” 2 1/2” 3”Part Number 52B00557 52B00558 52B00559Unit Price 545.00 595.00 685.00

COMPONENTSTop Sub 52B00841 52B00841 52B00841

158.00 158.00 158.00

Split Skirt 52B00555 52B00556 52B00850425.00 476.00 700.00

OPTIONAL (EXTRA)Extended Top Sub 52CS0000

288.00

WIREFINDER




moc.tni-sloot.www




E-52

WIRE RETRIEVER WITH SKIRT2”-3” WIRE RETRIEVER

The Wireline Retriever isdesigned to retrieve broken orcut slickline from the tubing. Itlocates and balls the broken wirewith the aid of the Split Skirt(located at the bottom of thetool). The wire is then trapped inbetween the spear point and theSplit Skirt. Pulling up on the toolstring wedges the broken linewithin the tool and the retrievingprocess can begin.

SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS"3-2 "3-2 "3-2 "3-2 "3-2

.D.OkcenhsiF "573.1.D.O.xaM "318.1

noitcennoCniP 01-"61/51htgneLpUedaM "839.92

TRIKSHTIW TRIKSHTIW TRIKSHTIW TRIKSHTIW TRIKSHTIW "2"2"2"2"2 "2/12 "2/12 "2/12 "2/12 "2/12 "3"3"3"3"3.D.OtrikStilpS "009.1 "004.2 "047.2

niPlloR x"8/1"2/11

x"8/1"2/11

x"8/1"2/11


2”-3” WIRE RETRIEVERASSEMBLY 52B0W000

Unit Price 750.00

COMPONENTSFishneck 52B00843

106.00

Inner Mandrel 52B01048159.00

Sub 52B00840106.00

Spear Point 52B00842141.00

Skirt Body 52B01597305.00

Slip 52A01599159.00

Slip Retainer Ring 52A0159844.00

WIRE RETRIEVER WITH SKIRTASSEMBLY 2” 2 1/2” 3”

Part Number 52WF0200 52WF0250 52WF0300Unit Price 1125.00 1175.00 1375.00

COMPONENTSWire Retriever 52B0W000 52B0W000 52B0W000

750.00 750.00 750.00

Split Skirt 52B00555 52B00556 52B00850425.00 476.00 700.00

E-54

GO DEVILThe Go Devil is dropped to cut thewireline at the rope socket when thetool string becomes stuck.



htgneLpUedaM'3 "000.63 "000.63 "000.63 "000.63'5 "000.06 "000.06 "000.06 "000.06


GO DEVILLENGTH 3’ 5’NOMINAL SIZE

1 1/4” 47G03125 47G05125300.00 340.00

1 1/2” 47G03150 47G05150300.00 355.00

1 3/4” 47G03175 47G05175365.00 415.00

1 7/8” 47G03178 47G05178450.00 510.00

E-56

RARE EARTH MAGNETThe Rare Earth Magnet is used toremove metal particles and debrisfrom the tubing, which may impedenormal wireline operations andprevent tools from functioningproperly.





RARE EARTH MAGNETASSEMBLY 1.450” 1.750” 2.250”

Part Number 37RE0150 37RE0200 37RE0250Unit Price 720.00 840.00 950.00

COMPONENTSTop Sub 37A00010 37A00020 37A00030

187.00 204.00 220.00

Bottom Sub 37A00011 37A00021 37A00031187.00 204.00 220.00

Shim 37A00012 37A00022 37A0003216.00 23.00 34.00

Magnet 37REM010 37REM020 37REM030334.00 400.00 523.00

E-58

RARE EARTH SKIRTED MAGNET

The Rare Earth Skirted Magnet isused to remove metal particles anddebris from the tubing, which mayimpede normal wireline operationsand prevent tools from functioningproperly.





RARE EARTH SKIRTED MAGNETASSEMBLY 1.750” 2.250” 2.750”

Part Number 37RES200 37RES250 37RES275Unit Price 1070.00 1480.00 1765.00

COMPONENTSFishneck 37A00023 37A00034 37A00050

241.00 257.00 289.00

Spring 90B01692 90B01692 90B0169242.00 42.00 42.00

Mandrel 37A00024 37A00035 37A00051241.00 257.00 289.00

Magnet 37REM010 37REM020 37REM030334.00 400.00 523.00

Shim 37A00012 37A00022 37A0003216.00 23.00 34.00

Bottom Sub 37A00011 37A00021 37A00031187.00 204.00 220.00

Skirt 37A00025 37A00036 37A00052241.00 273.00 289.00

E-60

SHOCK ABSORBERThe Shock Absorber is used toprotect pressure and temperaturerecording equipment from the jarringaction resulting from setting andretrieving the accompanying lockingmandrel. The Shock Absorber hastwo separate springs which receiveboth upward and downward jarringshock.



noitcennoCniP 01-"61/51 01-"61/11noitcennoCxoB 61-"4/3 61-"4/3htgneLpUedaM "000.42 "052.42

niPlloR "61/31x"8/1 "8/31x"8/1


SHOCK ABSORBERASSEMBLY 1 1/2” 1 3/4”

Part Number 34SA0150 34SA0175Unit Price 705.00 835.00

COMPONENTSLower Stop 34B00722 34B00828

73.00 88.00

Fishneck 34B00721 34B0082696.00 116.00

Body 34B00720 34B00827159.00 192.00

Rod 34B00723 34B00829159.00 175.00

Lower Spring 90N02211 90N02214117.00 131.00

Upper Spring 90N02212 90N02213117.00 131.00

Rod Cap 34B00724 34B0083045.00 55.00

E-62

“TIC” ANTI-BLOW TOOLThe “TIC” Anti-Blow Tool is installedin the tool string above the BottomHole Pressure equipment. The weightof the BHP equipment will keep thedog grabs on the Anti-Blow Toolretracted. A sudden surge of pressurefrom below forces the weight of theBHP equipment upward upon theAnti-Blow Tool. The spring loadeddog grabs expand to grab the innerwall of the tubing and prevent the toolstring from being blown up the tubing.



snoitcennoCxoB&niP 01-"61/51 01-"61/51 01-"61/51)dednapxE(sbarGgoD "313.2 "365.2 "573.3

niPkcoLleetS "8/7x"8/1 "8/7x"8/1 "8/7x"8/1


“TIC” ANTI-BLOW TOOLASSEMBLY 2 3/8” 2 7/8” 3 1/2”

Part Number 47TIC200 47TIC250 47TIC300Unit Price 960.00 960.00 980.00

COMPONENTSTop Sub 47TIC001 47TIC001 47TIC001

141.00 141.00 141.00

Adapter (2) 47TIC002 (2) 47TIC002 (2) 47TIC00262.00 ea. 62.00 ea. 62.00 ea.

Core 47TIC003 47TIC003 47TIC00388.00 88.00 88.00

Core Cap 47TIC004 47TIC004 47TIC00472.00 72.00 72.00

Body 47TIC005 47TIC005 47TIC005235.00 235.00 235.00

Swivel Arm (2) 47TIC006 (2) 47TIC006 (2) 47TIC00655.00 ea. 55.00 ea. 55.00 ea.

Dog Grab (2) 47TIC007 (2) 47TIC008 (2) 47TIC00997.00 ea. 97.00 ea. 105.00 ea.

Spring (2) 90N02120 (2) 90N02120 (2) 90N0212051.00 ea. 51.00 ea. 51.00 ea.

E-64

QUICK LOCKThe Quick Lock Coupling is designedto provide an operator with a fast butsafe means of changing over toolswithout the use of wrenches. Throughthe use of a spring loaded slide, theQuick Lock Coupling halves areeasily released or secured together.





TIC STYLE QUICK LOCKThe TIC Style Quick Lock is designedto provide an operator with a fast butsafe means of changing over toolswithout the use of wrenches.

The TIC Style Quick Lock is unique inthat it incorporates a locking pin topromote easy operation and apositive locking mechanism.

As an integral component of awireline tool, the TIC Style QuickLock becomes a fast, strong, andreliable alternative to the traditionalcoupling connection.



snoitcennoCxoB&niP 01-"61/51 01-"61/11htgneLpUedaM "578.01 "881.11

niPlloR "4/3x"8/1 "1x"8/1

E-66

TIC STYLE QUICK LOCKASSEMBLY 1 1/2” 1 7/8”

Part Number 12NQL150 12NQL200Unit Price 625.00 850.00

COMPONENTS

Slide 12NQL001 12NQL00496.00 124.00

Lock Pin 12NQL002 12NQL00545.00 51.00

Slide Pin Spring 90NQL150 90NQL17817.00 19.00

Body 12NQL006 12NQL008239.00 303.00

Lower Sub 12NQL007 12NQL009189.00 246.00

Spring 90A01499 90A0104416.00 27.00

QUICK LOCKASSEMBLY 1 1/4” 1 1/2” 2 1/2”

Part Number 12QL0125 12QL0150 12QL0250Unit Price 575.00 575.00 1240.00

COMPONENTSLower Sub 12B01105 12B01103 12B01597

140.00 140.00 476.00

Top Sub 12B01592 12B01104 12B01598347.00 347.00 699.00

Sleeve 12B01593 12B01595 12B0159923.00 23.00 109.00

Slide 12B01594 12B01596 12B0160080.00 80.00 318.00

Spring 90A01498 90A01499 90N0220916.00 16.00 81.00


WIRELINE TORSION TESTERThe Wireline Torsion Tester wasdesigned as a field testing procedureto identify deterioration of wiremechanical properties.

Part Number 99000001Unit Price 700.00 net

E-68

GD31MO

GD316

*Prices available upon request.

WIREGD31Mo is a super austenitic stainless steel suitable for well conditions withCO2, H2S, and Chlorides.

GD316 is an austenitic stanless steel suitable for sweet well conditions withCO2, no H2S and low Chlorides.

All lines are:

• Weld free• 100% non destructive tested• Wood or steel reels• Custom diameters and lengths available

)%.tw(egnaRnoitisopmoClacimehC )%.tw(egnaRnoitisopmoClacimehC )%.tw(egnaRnoitisopmoClacimehC )%.tw(egnaRnoitisopmoClacimehC )%.tw(egnaRnoitisopmoClacimehC

iN rC oM uC nM N C P SniM 5.42 0.02 0.6 8.0 81.0xaM 5.52 0.12 8.6 0.1 0.1 02.0 20.0 30.0 500.0

.aiD)ni(

.aiD)mm(

muminiMgnikaerB

daoL).f.sbl(

muminiMgnikaerB

daoL)Nk(

muminiMeziSevaehS

)ni(

muminiMeziSevaehS

)mm(

thgieW)tf0001/sbl(

thgieW)m0001/gk(

290. 43.2 0551 98.6 31 033 73.32 87.43801. 47.2 0512 65.9 51 183 12.23 49.74521. 81.3 0582 76.21 81 754 51.34 22.46

)%.tw(egnaRnoitisopmoClacimehC )%.tw(egnaRnoitisopmoClacimehC )%.tw(egnaRnoitisopmoClacimehC )%.tw(egnaRnoitisopmoClacimehC )%.tw(egnaRnoitisopmoClacimehC

iN rC oM nM iS N C P SniM 0.21 0.61 5.2 40.0xaM 0.41 0.81 0.3 0.2 0.1 60.0 60.0 540.0 010.0

.aiD)ni(

.aiD)mm(

muminiMgnikaerB

daoL).f.sbl(

muminiMgnikaerB

daoL)Nk(

muminiMeziSevaehS

)ni(

muminiMeziSevaehS

)mm(

thgieW)tf0001/sbl(

thgieW)m0001/gk(

270. 38.1 578 79.3 01 652 20.41 40.12290. 43.2 0341 94.6 31 033 09.22 04.43801. 47.2 0691 09.8 51 183 55.13 71.74521. 81.3 0462 99.11 81 754 72.24 45.36


WIREAPI - 9A CARBON WIRE

NETPART WEIGHT BREAKING PRICE

DIAMETER NUMBER PER MFT STRENGTH PER MFT.

.082” 82W08200 18.0 1239 ********

.092” 82W09200 22.6 1547 ********

.108” 82W10800 30.0 1966 ********

.125” 82W12500 41.7 2847 ********

HIGH STRENGTH CARBON WIRENET

PART WEIGHT BREAKING PRICEDIAMETER NUMBER PER MFT STRENGTH PER MFT.

.082” 82W08205 18.0 1460 ********

.092” 82W09205 22.6 1830 ********

.108” 82W10805 31.0 2490 ********

.125” 82W12505 41.7 3300 ********

* Prices available upon request.

E-70



moc.tni-sloot.www




F-1Prices effective June 1, 2012 1-800-338-0308

F

BAILERS

F- 2

SAND BAILERThe Sand Bailer is a pump actiontype bailer designed to remove sandand small debris in the tubing string,through the upward stroking motionof the pump section. Sand and debrisare held in the load barrel through theuse of different style check bottoms.A large percentage of wireline serviceinvolves sand bailing prior to theactual pulling or setting of subsurfaceflow controls.

"8/51 "8/51 "8/51 "8/51 "8/51 "4/31 "4/31 "4/31 "4/31 "4/31 "2"2"2"2"2.D.OkcenhsiF "573.1 "573.1 "573.1

.D.O.xaM "526.1 "057.1 "000.2noitcennoCniP 01-"61/51 01-"61/51 01-"61/51denepO-htgneL)llaB(desolC

"834.641 "005.741 "005.841"834.011 "005.111 "005.211

denepO-htgneL)reppalF(desolC

"521.641 "526.641 "526.641"521.011 "526.011 "526.011

ekortSregnulP "000.63 "000.63 "000.63)notsiP(llaB "8/5 "8/5 "8/5

llaB* "1 "8/11 "4/11niPleetS*

daerhTesraoCdaerhTeniF

"8/51x"61/3 "4/31x"61/3 *****

"8/51x"4/1 "4/31x"4/1 "2x"61/3

ylnOmottoBllaBnO*

SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS"1"1"1"1"1 "4/11 "4/11 "4/11 "4/11 "4/11 "8/31 "8/31 "8/31 "8/31 "8/31 "2/11 "2/11 "2/11 "2/11 "2/11


noitcennoCniP 11-"8/5 01-"61/51 01-"61/51 01-"61/51denepO-htgneL)llaB(desolC

"578.441 "886.641 "834.641 "834.641"578.801 "886.011 "834.011 "834.011

denepO-htgneL)reppalF(desolC

"365.441 "000.051 "521.541 '052.641"365.801 "000.411 "521.901 "052.011

ekortSregnulP "000.63 "000.63 "000.63 "000.63)notsiP(llaB "8/3 "2/1 "2/1 "2/1

llaB* "8/5 "4/3 "4/3 "1niPleetS*

daerhTesraoCdaerhTeniF

***** "4/11x"61/3 ***** "2/11x"61/3

"1x"61/3 "4/11x"4/1 "8/31x"61/3 "2/11x"4/1

ylnOmottoBllaBnO*


SAND BAILER (BALL BOTTOM / COARSE THREAD)

ASSEMBLY 1 1/4” 1 1/2” 1 5/8” 1 3/4”Part Number 50SB4125 50SB4150 50SB4158 50SB4175Unit Price 855.00 855.00 855.00 855.00

COMPONENTSPump Section 50SBP125 50SBP150 50SBP158 50SBP175

570.00 570.00 570.00 570.00

Fishneck 50B01182 50B01182 50B01075 50B01075126.00 126.00 126.00 126.00

Barrel 50B01341 50B00810 50B00560 50B01350172.00 172.00 172.00 172.00

Stroke Rod 50B01180 50B01180 50B01085 50B0108574.00 74.00 74.00 74.00

Piston Stop 50B01384 50B01380 50B01386 50B0138591.00 91.00 91.00 91.00

Piston 50B01383 50B01602 50B01086 50B01086102.00 102.00 102.00 102.00

Wobble Washer (4) 50A01134 (4) 50A01114 (5) 50A01115 (5) 50A0111611.00 ea. 11.00 ea. 11.00 ea. 11.00 ea.

Piston Nut 50B01088 50A01363 50B01087 50B0108716.00 16.00 16.00 16.00

Stop Ring 50B01082 50B01082 50B01083 50B0108313.00 13.00 13.00 13.00

Ball Bottom 50SB7125 50SB7150 50SB7158 50SB7175175.00 175.00 175.00 175.00

Housing 50B01179 50B00809 50B01073 50B0107492.00 92.00 92.00 92.00

Shoe 50B01178 50B00808 50B01084 50B0135192.00 92.00 92.00 92.00

Load Barrel 50B01345 50B01346 50B01342 50B01348172.00 172.00 172.00 172.00

Crossover Sub 50A00554 50B00811 50B01091 50B0109291.00 91.00 91.00 91.00

F- 4

SAND BAILER (FLAPPER BOTTOM / COARSE THREAD)

ASSEMBLY 1 1/4” 1 1/2” 1 5/8” 1 3/4”Part Number 50SB5125 50SB5150 50SB5158 50SB5175Unit Price 855.00 855.00 855.00 855.00

COMPONENTSPump Section 50SBP125 50SBP150 50SBP158 50SBP175

570.00 570.00 570.00 570.00

Fishneck 50B01182 50B01182 50B01075 50B01075126.00 126.00 126.00 126.00

Barrel 50B01341 50B00810 50B00560 50B01350172.00 172.00 172.00 172.00

Stroke Rod 50B01180 50B01180 50B01085 50B0108574.00 74.00 74.00 74.00

Piston Stop 50B01384 50B01380 50B01386 50B0138591.00 91.00 91.00 91.00

Piston 50B01383 50B01602 50B01086 50B01086102.00 102.00 102.00 102.00

Wobble Washer (4) 50A01134 (4) 50A01114 (5) 50A01115 (5) 50A0111611.00 ea. 11.00 ea. 11.00 ea. 11.00 ea.

Piston Nut 50B01088 50A01363 50B01087 50B0108716.00 16.00 16.00 16.00

Stop Ring 50B01082 50B01082 50B01083 50B0108313.00 13.00 13.00 13.00

Flapper Bottom 50SB8125 50SB8150 50SB8158 50SB8175175.00 175.00 175.00 175.00

Load Barrel 50B01345 50B01346 50B01342 50B01348172.00 172.00 172.00 172.00

Crossover Sub 50A00554 50B00811 50B01091 50B0109291.00 91.00 91.00 91.00


SAND BAILER (BALL BOTTOM / FINE THREAD)

ASSEMBLY 1” 1 1/4” 1 3/8” 1 1/2”Part Number 50SB4100 50FT1125 50SB4138 50FT1150Unit Price 855.00 855.00 855.00 855.00

COMPONENTSPump Section 50SBP100 50FTP125 50SBP138 50FTP150

570.00 570.00 570.00 570.00

Fishneck 50B00921 50B01182 50B01182 50B01182126.00 126.00 126.00 126.00

Barrel 50B00922 50B01417 50B01338 50B01424172.00 172.00 172.00 172.00

Stroke Rod 50B00924 50B01180 50B01180 50B0118074.00 74.00 74.00 74.00

Piston Stop 50B00920 50B01418 50B01387 50B0142591.00 91.00 91.00 91.00

Piston 50B00925 50B01383 50B01602 50B01602102.00 102.00 102.00 102.00

Wobble Washer ******** (4) 50B01422 (4) 50A01117 (4) 50B0142911.00 ea. 11.00 ea. 11.00 ea.

Piston Nut ******** 50B01088 50A01363 50A0136316.00 16.00 16.00

Stop Ring 50B01081 50B01082 50B01082 50B0108213.00 13.00 13.00 13.00

Ball Bottom 50SB7100 50FT7125 50SB7138 50FT7150175.00 175.00 175.00 175.00

Ball Housing ******** 50B01445 50B00804 50B0144692.00 92.00 92.00

Shoe ******** 50B01178 50B00805 50B0080892.00 92.00 92.00

Load Barrel 50B00927 50B01420 50B01343 50B01427172.00 172.00 172.00 172.00

Crossover 50B00923 50B01449 50B00812 50B0142891.00 91.00 91.00 91.00

F- 6

SAND BAILER (BALL BOTTOM / FINE THREAD)

ASSEMBLY 1 5/8” 1 3/4” 2”Part Number 50FT1163 50FT1175 50SB4200Unit Price 855.00 855.00 1095.00

COMPONENTSPump Section 50FTP163 50FTP175 50SBP200

570.00 570.00 645.00

Fishneck 50B01075 50B01075 50B01075126.00 126.00 126.00

Barrel 50B01431 50B01438 50B01037172.00 172.00 198.00

Stroke Rod 50B01085 50B01085 50B0108574.00 74.00 74.00

Piston Stop 50B01432 50B01439 50B0103691.00 91.00 105.00

Piston 50B01086 50B01086 50B01040102.00 102.00 102.00

Wobble Washer (5) 50B01436 (5) 50B01443 (4) 50A0113611.00 ea. 11.00 ea. 14.00 ea.

Piston Nut 50B01087 50B01087 50B0103916.00 16.00 16.00

Stop Ring 50B01083 50B01083 50B0108313.00 13.00 13.00

Ball Bottom 50FT7163 50FT7175 50SB7200175.00 175.00 190.00

Ball Housing 50B01447 50B01448 50B0104992.00 92.00 98.00

Shoe 50B01084 50B01351 50B0104892.00 92.00 98.00

Load Barrel 50B01434 50B01441 50B01038172.00 172.00 180.00

Crossover 50B01435 50B01442 50B0104691.00 91.00 109.00


SAND BAILER (FLAPPER BOTTOM / FINE THREAD)

ASSEMBLY 1” 1 1/4” 1 3/8” 1 1/2”Part Number 50SB5100 50FT0125 50SB5138 50FT0150Unit Price 855.00 855.00 855.00 855.00

COMPONENTSPump Section 50SBP100 50FTP125 50SBP138 50FTP150

570.00 570.00 570.00 570.00

Fishneck 50B00921 50B01182 50B01182 50B01182126.00 126.00 126.00 126.00

Barrel 50B00922 50B01417 50B01338 50B01424172.00 172.00 172.00 172.00

Stroke Rod 50B00924 50B01180 50B01180 50B0118074.00 74.00 74.00 74.00

Piston Stop 50B00920 50B01418 50B01387 50B0142591.00 91.00 91.00 91.00

Piston 50B00925 50B01383 50B01602 50B01602102.00 102.00 102.00 102.00

Wobble Washer ******** (4) 50B01422 (4) 50A01117 (4) 50B0142911.00 ea. 11.00 ea. 11.00 ea.

Piston Nut ******** 50B01088 50A01363 50A0136316.00 16.00 16.00

Stop Ring 50B01081 50B01082 50B01082 50B0108213.00 13.00 13.00 13.00

Flapper Bottom 50SB8100 50FT8125 50SB8138 50FT8150175.00 175.00 175.00 175.00

Load Barrel 50B00927 50B01420 50B01343 50B01427172.00 172.00 172.00 172.00

Crossover 50B00923 50B01449 50B00812 50B0142891.00 91.00 91.00 91.00

F- 8

SAND BAILER (FLAPPER BOTTOM / FINE THREAD)

ASSEMBLY 1 5/8” 1 3/4” 2”Part Number 50FT0163 50FT0175 50SB5200Unit Price 855.00 855.00 1095.00

COMPONENTSPump Section 50FTP163 50FTP175 50SBP200

570.00 570.00 645.00

Fishneck 50B01075 50B01075 50B01075126.00 126.00 126.00

Barrel 50B01431 50B01438 50B01037172.00 172.00 198.00

Stroke Rod 50B01085 50B01085 50B0108574.00 74.00 74.00

Piston Stop 50B01432 50B01439 50B0103691.00 91.00 105.00

Piston 50B01086 50B01086 50B01040102.00 102.00 102.00

Wobble Washer (5) 50B01436 (5) 50B01443 (4) 50A0113611.00 ea. 11.00 ea. 14.00 ea.

Piston Nut 50B01087 50B01087 50B0103916.00 16.00 16.00

Stop Ring 50B01083 50B01083 50B0108313.00 13.00 13.00

Flapper Bottom 50FT8163 50FT8175 50SB8200175.00 175.00 220.00

Load Barrel 50B01434 50B01441 50B01038172.00 172.00 180.00

Crossover 50B01435 50B01442 50B0104691.00 91.00 109.00


MAXWELL STYLE SAND BAILERThe Sand Bailer is a pump actiontype bailer designed to remove sandand small debris in the tubing string,through the upward stroking motionof the pump section. Sand and debrisare held in the load barrel through theuse of different style check bottoms.A large percentage of wireline serviceinvolves sand bailing prior to theactual pulling or setting of subsurfaceflow controls.

F- 10

PUMP SECTION(FOR MAXWELL STYLE SAND BAILER)

ASSEMBLY 1” 1 1/4” 1 1/2”Standard Stroke

Part Number 50MXP100-004 50MXP125-004 50MXP150-004Unit Price 795.00 795.00 795.00

6 ft. StrokePart Number 50MXP100-006 50MXP125-006 50MXP150-006Unit Price 845.00 845.00 845.00



126.00 126.00 126.00

Pump BarrelStandard Stroke 50B00922 50B01417 50B01424

172.00 172.00 172.00

6 ft. Stroke 50M00026 50M00028 50M00031216.00 216.00 216.00

8 ft. Stroke 50M00034 50M00037 50M00038227.00 227.00 227.00

Stroke RodStandard Stroke 50B00924 50B01180 50B01180

74.00 74.00 74.00

6 ft. Stroke 50M00027 50M00017 50M0003294.00 94.00 94.00

8 ft. Stroke 50M00035 50M00036 50M00036117.00 117.00 117.00

Piston Stop 50B00920 50B01418 50B0142591.00 91.00 91.00

Valve Hanger 50M00023 50M00014 50M00029105.00 105.00 105.00

Valve 50M00024 50M00013 50M0001378.00 78.00 78.00

Brass Piston 50M00025 50M00015 50M0003071.00 71.00 71.00

Stop Ring 50B01081 50B01082 50B0108213.00 13.00 13.00

F-1 1Prices effective June 1, 2012 1-800-338-0308

MAXWELL STYLE SAND BAILERCOMPONENTS 1” 1 1/4” 1 1/2”

Load Barrel (Standard) 50B00927 50B01420 50B01427172.00 172.00 172.00

Load Barrel (6 ft.) 50M00068 50M00069 50M00070193.00 193.00 193.00



Crossover 50B00923 50B01449 50B0142891.00 91.00 91.00

Ball Check Crossover 50M00050 50M00051 50M00052193.00 193.00 193.00

Flapper Crossover 50FLX100 50FLX125 50FLX150195.00 195.00 195.00

Flap 50SB8098 50SB8123 50SB814875.00 75.00 75.00

Crossover Body 50M00059 50M00060 50M00061138.00 138.00 138.00

Flapper Bottom 50SB8100 50FT8125 50FT8150175.00 175.00 175.00

Flap 50SB8098 50SB8123 50SB814875.00 75.00 75.00

Flapper Shoe 50SB8099 50B01423 50B01430140.00 138.00 138.00

Ball Bottom 50SB7100 50FT7125 50FT7150175.00 175.00 175.00

Ball Housing ******** 50B01445 50B0144692.00 92.00

Shoe ******** 50B01178 50B0080892.00 92.00

Chisel Bottom 50SB9100 50FTC125 50FTC150250.00 250.00 250.00

Ball Housing (with ******** 50B01445 50B01446(Fine Threads) 92.00 92.00

Chisel ******** 50A00050 50A00060149.00 149.00

Drive Down Fishneck 50DDF100 50DDF125 50DDF150(with Fine Threads) 117.00 117.00 117.00

F- 12

PUMP SECTION(FOR MAXWELL STYLE SAND BAILER)

ASSEMBLY 1 5/8” 1 3/4” 2”Standard Stroke

Part Number 50MXP158-004 50MXP175-004 50MXP200-004Unit Price 720.00 720.00 805.00




126.00 126.00 126.00


172.00 172.00 198.00

6 ft. Stroke 50M00040 50M00041 50M00042216.00 216.00 216.00

8 ft. Stroke 50M00039 50M00008 50M00022227.00 227.00 230.00


74.00 74.00 74.00

6 ft. Stroke 50M00033 50M00033 50M0003394.00 94.00 94.00

8 ft. Stroke 50M00005 50M00005 50M00005117.00 117.00 117.00

Piston Stop 50B01432 50B01439 50B0103691.00 91.00 105.00

Valve Hanger 50M00001 50M00001 50M00001105.00 105.00 105.00

Valve 50M00002 50M00002 50M0000278.00 78.00 78.00

Brass Piston 50M00020 50M00004 50M0001971.00 71.00 102.00

Stop Ring 50B01083 50B01083 50B0108313.00 13.00 13.00


MAXWELL STYLE SAND BAILERCOMPONENTS 1 5/8” 1 3/4” 2”





Crossover 50B01435 50B01442 50B0104691.00 91.00 109.00



Flap 50SB8156 50SB8173 50SB819865.00 65.00 75.00


Flapper Bottom 50FT8163 50FT8175 50SB8200175.00 175.00 220.00

Flap 50SB8156 50SB8173 50SB819865.00 65.00 75.00

Flapper Shoe 50B01437 50B01444 50SB8199125.00 125.00 150.00

Ball Bottom 50FT7163 50FT7175 50SB7200175.00 175.00 190.00

Ball Housing 50B01447 50B01448 50B0104992.00 92.00 98.00

Shoe 50B01084 50B01351 50B0104892.00 92.00 98.00

Chisel Bottom 50FTC158 50FTC175 50SB9200225.00 225.00 240.00

Ball Housing (with 50B01447 50B01448 50B01049(Fine Threads) 92.00 92.00 98.00

Chisel 50A00065 50A00070 50A00075135.00 135.00 145.00


F- 14

PUMP SECTION(FOR MAXWELL STYLE SAND BAILER)ASSEMBLY 2 1/4” 2 1/2” 3”

Standard StrokePart Number 50MXP225-004 50MXP250-004 50MXP300-004Unit Price 890.00 970.00 1050.00




185.00 231.00 360.00


216.00 230.00 299.00

6 ft. Stroke 50M00018 50M00047 50M00048277.00 295.00 315.00

8 ft. Stroke 50M00006 50M00044 50M00009295.00 315.00 333.00


74.00 149.00 149.00

6 ft. Stroke 50M00033 50M00046 50M0004694.00 175.00 175.00

8 ft. Stroke 50M00005 50M00007 50M00007117.00 204.00 204.00

Piston Stop 50B01042 50B00953 50B01411132.00 175.00 288.00

Valve Hanger 50M00001 50M00010 50M00010105.00 117.00 117.00

Valve 50M00002 50M00011 50M0001178.00 117.00 117.00

Brass Piston 50M00003 50M00043 50M00012117.00 159.00 175.00

Stop Ring 50B01083 50B01080 50B0108013.00 13.00 13.00


MAXWELL STYLE SAND BAILERCOMPONENTS 2 1/4” 2 1/2” 3”





Crossover 50B01044 50B00956 50B01415117.00 186.00 223.00



Flap 50SB8223 50SB8248 50SB829885.00 85.00 95.00


Flapper Bottom 50SB8225 50SB8250 50SB8300245.00 265.00 285.00

Flap 50SB8223 50SB8248 50SB829885.00 85.00 95.00

Flapper Shoe 50SB8224 50SB8249 50SB8299175.00 195.00 225.00

Ball Bottom 50SB7225 50SB7250 50SB7300225.00 310.00 480.00

Ball Housing ******** 50B00950 50B01412185.00 250.00

Shoe ******** 50B00951 50B01413160.00 240.00

Chisel Bottom 50SB9225 50SB9250 50SB9300345.00 380.00 430.00

Ball Housing (with 50B00946 50B00950 50B01412(Fine Threads) 172.00 185.00 250.00

Chisel Bottom 50A00085 50A00090 50A00093200.00 210.00 230.00


F- 16

DRIVE DOWN BAILER(BALL BOTTOM)

Drive Down Bailers are made of abarrel to hold the sand and a ball orflapper type check valve on thebottom. Usually, the very bottom ofthese bailers are cut off at an angleto make a horseshoe shape. They areused successfully in bailing mud andshale and are loaded merely byrunning them down in the mud andpulling back out.




llaB "4/3 "1 "1 "8/11niPleetS "4/11x"61/3 "2/11x"61/3 "8/51x"61/3 "4/31x"61/3


DRIVE DOWN BAILER(FLAPPER BOTTOM)

Drive Down Bailers are made of abarrel to hold the sand and a ball orflapper type check valve on thebottom. Usually, the very bottom ofthese bailers are cut off at an angleto make a horseshoe shape. They areused successfully in bailing mud andshale and are loaded merely byrunning them down in the mud andpulling back out.




F- 18

DRIVE DOWN BAILERBALL BOTTOM (COARSE THREAD)

ASSEMBLY 1 1/4” 1 1/2” 1 5/8” 1 3/4”Part Number 50DD0125 50DD0150 50DD0163 50DD0175Unit Price 425.00 425.00 425.00 425.00

COMPONENTSFishneck 50DD2125 50DD2150 50DD2158 50DD2175

117.00 117.00 117.00 117.00

Load Barrel 50B01345 50B01346 50B01342 50B01348172.00 172.00 172.00 172.00

Ball Bottom 50SB7125 50SB7150 50SB7158 50SB7175175.00 175.00 175.00 175.00

FLAPPER BOTTOM (COARSE THREAD)


COMPONENTSFishneck 50DD2125 50DD2150 50DD2158 50DD2175

117.00 117.00 117.00 117.00

Load Barrel 50B01345 50B01346 50B01342 50B01348172.00 172.00 172.00 172.00

Flapper Bottom 50SB8125 50SB8150 50SB8158 50SB8175175.00 175.00 175.00 175.00


DRIVE DOWN BAILERBALL BOTTOM (FINE THREAD)


COMPONENTSFishneck 50DDF125 50DDF150 50DDF158 50DDF175

117.00 117.00 117.00 117.00

Load Barrel 50B01420 50B01427 50B01434 50B01441172.00 172.00 172.00 172.00

Ball Bottom 50FT7125 50FT7150 50FT7163 50FT7175175.00 175.00 175.00 175.00

FLAPPER BOTTOM (FINE THREAD)


COMPONENTSFishneck 50DDF125 50DDF150 50DDF158 50DDF175

117.00 117.00 117.00 117.00

Load Barrel 50B01420 50B01427 50B01434 50B01441172.00 172.00 172.00 172.00

Flapper Bottom 50FT8125 50FT8150 50FT8163 50FT8175175.00 175.00 175.00 175.00

F- 20

HYDROSTATIC BAILER(SHEAR PIN STYLE)

The Hydrostatic Bailer is designed tobe used when a pump action bailerfails to remove the sand or debrissurrounding a subsurface device. TheHydrostatic Bailer consists of achamber loaded at atmosphere andsealed off. When the bailer reachesthe top of the sand, downward jarringshears a pin, causing bottom holepressure to surge into the chamber,forcing the bailer piston upward.When pressure in the chamberequalizes the bhp, a ball checkcloses to retain the sand and debrisin the chamber.

SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS"4/11 "4/11 "4/11 "4/11 "4/11 "8/31 "8/31 "8/31 "8/31 "8/31 "2/11 "2/11 "2/11 "2/11 "2/11 "8/51 "8/51 "8/51 "8/51 "8/51 "4/31 "4/31 "4/31 "4/31 "4/31



llaB "2/1 "4/3 "4/3 "8/7 "1niPleetS "4/11x"61/3 "8/31x"61/3 "2/11x"61/3 "8/51x"4/1 "4/31x"4/1niPraehS "61/51x"61/3 "8/11x"61/3 "8/11x"61/3 "8/31x"4/1 "2/11x"4/1


HYDROSTATIC BAILER(SHEAR PIN STYLE)

ASSEMBLY 1 1/4” 1 3/8” 1 1/2”Part Number 50HB1125 50HB1138 50HB1150Unit Price 1125.00 1125.00 1125.00


133.00 133.00 133.00

Check Element 50A00892 50A00892 50A00892100.00 100.00 100.00

Check Housing 50B00501 50B01367 50B01173171.00 171.00 171.00

Tube 50B00502 50B01344 50B01340216.00 216.00 216.00

Seat Washer 50B00509 50A01369 50A0136912.00 12.00 12.00

Seat 50B00510 50A01368 50A0136819.00 19.00 19.00

Soft Core Housing 50B00507 50B01369 50B01370108.00 108.00 108.00

Plunger 50B00505 50B01365 50B0136594.00 94.00 94.00

Plunger Housing 50B00506 50B01361 50B0139687.00 87.00 87.00

Piston 50B00503 50A01362 50A0136278.00 78.00 78.00

Piston Housing 50B00504 50B01366 50B01395157.00 157.00 157.00

Seat Skirt 50B00508 50B01363 50B01371133.00 133.00 133.00

O-ring (Piston) #111 #114 #114.75 .75 .75

O-ring (Tube) (2) #117 (2) #120 (2) #120.85 ea. .85 ea. .85 ea.

O-ring (Check Element) #009 #009 #009.55 .55 .55

O-ring (Check Element) #013 #013 #013.75 .75 .75

F- 22

HYDROSTATIC BAILER(SHEAR PIN STYLE)ASSEMBLY 1 5/8” 1 3/4”

Part number 50HB1163 50HB1175Unit Price 1125.00 1125.00


133.00 133.00

Check Element 50A00164 50A00164100.00 100.00

Check Housing 50B01392 50B01197171.00 171.00

Tube 50B01033 50B01195216.00 216.00

Seat Washer 50A01390 50A0139412.00 12.00

Seat 50A01389 50A0139519.00 19.00

Soft Core Housing 50B01200 50B01192108.00 108.00

Plunger 50B01199 50B0119394.00 94.00

Plunger Housing 50B01198 50B0119487.00 87.00

Piston 50A00851 50A0016378.00 78.00

Piston Housing 50A00874 50A00357157.00 157.00

Seat Skirt 50B01391 50B01050133.00 133.00

O-ring (Piston) #210 #212.85 .85

O-ring (Tube) #217 (2) #219.85 1.00 ea.

O-ring (Tube) #124 ********.85

O-ring (Check Element) #012 #012.55 .55

O-ring (Check Element) #113 #113.75 .75




moc.tni-sloot.www




F- 24

SAMPLE BAILERThe Sample Bailer is normallyattached to the bottom of a TubingEnd Locator to retrieve samples offluids and solids from the well bottom.This tool can be modified to accept aDrive Down Fishneck.

"8/51 "8/51 "8/51 "8/51 "8/51 "4/31 "4/31 "4/31 "4/31 "4/31.D.OkcenhsiF "573.1 "573.1

.D.O.xaM "526.1 "057.1noitcennoCniP 01-"61/51 01-"61/51htgneLpUedaM "886.32 "886.32

llaB "1 "4/11niPleetS "8/51x"61/3 "4/31x"61/3

SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS"1"1"1"1"1 "4/11 "4/11 "4/11 "4/11 "4/11 "2/11 "2/11 "2/11 "2/11 "2/11



llaB "8/5 "4/3 "8/7niPleetS "1x"8/1 "4/11x"61/3 "2/11x"61/3


SAMPLE BAILER(COARSE THREAD)

ASSEMBLY 1 1/4” 1 1/2”Part Number 50S00125 50S00150Unit Price 285.00 285.00

COMPONENTSTop Sub 50DD2125 50DD2150

117.00 117.00

Tube 50A00004 50A0001178.00 78.00

Ball Bottom 50SB7125 50SB7150175.00 175.00

Housing 50B01179 50B0080992.00 92.00

Shoe 50B01178 50B0080892.00 92.00

ASSEMBLY 1 5/8” 1 3/4”Part Number 50S00163 50S00175Unit Price 300.00 335.00

COMPONENTSTop Sub 50DD2158 50DD2175

117.00 117.00

Tube 50A00012 50A0002096.00 96.00

Ball Bottom 50SB7158 50SB7175175.00 175.00

Housing 50B01073 50B0107492.00 92.00

Shoe 50B01084 50B0135192.00 92.00

F- 26

SAMPLE BAILER(FINE THREAD)

ASSEMBLY 1” 1 1/4” 1 1/2”Part Number 50S00100 50SFT125 50SFT150Unit Price 280.00 285.00 285.00

COMPONENTSTop Sub 50DDF100 50DDF125 50DDF150

117.00 117.00 117.00

Tube 50A00007 50A00032 50A0003478.00 78.00 78.00

Ball Bottom 50SB7100 50FT7125 50FT7150175.00 175.00 175.00

Housing ******** 50B01445 50B0144692.00 92.00

Shoe ******** 50B01178 50B0080892.00 92.00

ASSEMBLY 1 5/8” 1 3/4”Part Number 50SFT163 50SFT175Unit Price 300.00 335.00

COMPONENTSTop Sub 50DDF158 50DDF175

117.00 117.00

Tube 50A00036 50A0003896.00 96.00

Ball Bottom 50FT7163 50FT7175175.00 175.00

Housing 50B01447 50B0144792.00 92.00

Shoe 50B01084 50B0135192.00 92.00




moc.tni-sloot.www




F- 28

ASSEMBLY 1 1/4”, 1 1/2” 2”, 2 1/2” 3”Part Number 33TL0125 33TL0200 33TL0300Unit Price 495.00 415.00 465.00

COMPONENTSBody 33B01245 33B01251 33B01252

350.00 292.00 333.00

Finger 33A01250 33A01124 33A01124128.00 109.00 109.00

Spring 90A01181 90A01180 90A0118022.00 20.00 20.00

TUBING END LOCATORThe Tubing End Locator is used todetermine the depth of the tubingthrough the use of a spring loadedfinger. The spring loaded fingercatches the end of the tubing whenpulled upward, registering a readingon the surface weight indicator.

SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS"2/11,"4/11 "2/11,"4/11 "2/11,"4/11 "2/11,"4/11 "2/11,"4/11 "2/12,"2 "2/12,"2 "2/12,"2 "2/12,"2 "2/12,"2 "3"3"3"3"3


daerhTnoitcennoC 01-"61/51 01-"61/51 01-"61/51

htgneLpUedaM "526.01 "834.01 "834.01niPraehS "4/11x"61/3 "4/31x"61/3 "4/31x"61/3

Prices effective June 1, 2012 1-800-338-0308 G-1

G

SHIFTING TOOLS

G-2

“B” SHIFTING TOOLThe “B” Shifting Tool is designed toselectively locate and shift mostsliding side door sleeves. This isaccomplished by the “B” Shifting Toolkeys engaging the SSD inner sleeve,and depending on the direction thetool is run, up or down, the sleeve isshifted.

"313.2 "313.2 "313.2 "313.2 "313.2 "265.2 "265.2 "265.2 "265.2 "265.2 "057.2 "057.2 "057.2 "057.2 "057.2 "318.2 "318.2 "318.2 "318.2 "318.2 "052.3 "052.3 "052.3 "052.3 "052.3 "886.3 "886.3 "886.3 "886.3 "886.3 "318.3 "318.3 "318.3 "318.3 "318.3.D.OkcenhsiF "057.1 "057.1 "313.2 "313.2 "313.2 "521.3 "521.3noitcennoCniP 01-"61/51 01-"61/51 01-"61/11 01-"61/11 01-"61/11 01-"61/11 01-"61/11htgnelpuedaM "318.11 "839.11 "881.21 "881.21 "521.41 "313.31 "839.21

.D.O)detcarteRsyeK( "651.2 "035.2 "817.2 "817.2 "002.3 "656.3 "437.3

.D.O)dednapxEsyeK( "656.2 "869.2 "130.3 "651.3 "046.3 "521.4 "390.4

wercSteS "4/1x61-"8/3 "61/5x61-"8/3 "4/1x61-"8/3 "4/1x61-"8/3 "8/3x61-"8/3 "8/5x61-"8/3 "8/5x61-"8/3

niPraehS "8/31x"4/1 "8/51x"4/1 "4/12x"61/5 "4/12x"61/5 "61/512x"8/3 "61/33x"8/3 "4/13x"8/3

SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS"052.1 "052.1 "052.1 "052.1 "052.1 "005.1 "005.1 "005.1 "005.1 "005.1 "526.1 "526.1 "526.1 "526.1 "526.1 "017.1 "017.1 "017.1 "017.1 "017.1 "187.1 "187.1 "187.1 "187.1 "187.1 "578.1 "578.1 "578.1 "578.1 "578.1 "521.2 "521.2 "521.2 "521.2 "521.2

.D.OkcenhsiF "000.1 "881.1 "881.1 "881.1 "573.1 "573.1 "573.1noitcennoCniP 11-"8/5 01-"61/51 01-"61/51 01-"61/51 01-"61/51 01-"61/51 01-"61/51htgnelpuedaM "526.9 "005.01 "839.01 "318.01 "313.11 "313.11 "000.31

.D.OdetcarteRsyeK( ) "012.1 "604.1 "516.1 "886.1 "057.1 "048.1 "569.1

.D.O)dednapxEsyeK( "354.1 "917.1 "098.1 "490.2 "021.2 "651.2 "834.2

wercSteS "4/1x02-"4/1 "4/1x02-"4/1 "61/5x02-"4/1 "61/5x02-"4/1 "4/1x61-"8/3 "4/1x61-"8/3 "4/1x61-"8/3

niPraehS "61/51x"61/3 "8/11x"4/1 "8/11x"4/1 "8/11x"4/1 "8/31x"4/1 "8/31x"4/1 "8/31x"4/1


“B” SHIFTING TOOLASSEMBLY 1.250” 1.500” 1.625” 1.710”

Part Number (Selective Keys) 42ST0125 42ST0150 42ST0175 42ST0171Part Number (Positive Keys) 42ST1125 42ST1150 42ST1175 42ST1171Unit Price 1065.00 1065.00 1065.00 1065.00

COMPONENTSTop Sub 42B00937 42B01431 42B00836 42B00650

266.00 266.00 266.00 266.00

Body 42B00938 42B01430 42B01430 42B01430285.00 285.00 285.00 285.00

Upper Key Retainer 42A00934 42A01432 42A01146 42A0144052.00 52.00 52.00 52.00

Lower Key Retainer 42A00935 42A01431 42A01445 42A0144157.00 57.00 57.00 57.00

Key 131.00 ea. 131.00 ea. 131.00 ea. 131.00 ea.

Selective (2) 42B00826 (2) 42B00832 (2) 42B00835 (2) 42B00651Positive (2) 42B00827 (2) 42B00833 (2) 42B00837 (2) 42B00652


Collet 42B00936 42B01429 42B01429 42B01429158.00 158.00 158.00 158.00

G-4

“B” SHIFTING TOOLASSEMBLY 1.781” 1.875” 2.125” 2.313”

Part Number (Selective Keys) 42ST2200 42ST0200 42ST0213 42ST0250Part Number (Positive Keys) 42ST3200 42ST1200 42ST1213 42ST1250Unit Price 935.00 935.00 1065.00 1065.00

COMPONENTSTop Sub 42A00103 42A00103 42B01531 42B00198

242.00 242.00 266.00 266.00

Body 42B00103 42B00103 42B00103 42B00197285.00 285.00 285.00 285.00

Upper Key Retainer 42A00193 42A00193 42A01528 42A0019638.00 38.00 52.00 52.00

Lower Key Retainer 42A00194 42A00194 42A01527 42A0019540.00 40.00 57.00 57.00

Key 117.00 ea. 117.00 ea. 131.00 ea. 131.00 ea.

Selective (2) 42B00078 (2) 42B00077 (2) 42B01529 (2) 42B00200Positive (2) 42B01005 (2) 42B01004 (2) 42B01528 (2) 42B00829


Collet 42B00102 42B00102 42B00102 42B00199142.00 142.00 142.00 158.00


“B” SHIFTING TOOLASSEMBLY 2.562” 2.750” 2.813”

Part Number (Selective Keys) 42ST0256 42ST0300 42ST0281Part Number (Positive Keys) 42ST1256 42ST1300 42ST1281Unit Price 1185.00 1325.00 1325.00

COMPONENTSTop Sub 42C01433 42A00603 42A00603

292.00 293.00 293.00

Body 42B00197 42B01435 42B01435285.00 367.00 367.00

Upper Key Retainer 42A00196 42B00822 42B0082252.00 58.00 58.00

Lower Key Retainer 42A00195 42B00823 42B0082357.00 62.00 62.00

Key 171.00 ea. 171.00 ea. 171.00 ea.

Selective (2) 42C00949 (2) 42B01076 (2) 42B00700Positive (2) 42C00950 (2) 42C01434 (2) 42B00701


Collet 42B00199 42B01146 42B01146158.00 229.00 229.00

G-6

“B” SHIFTING TOOLASSEMBLY 3.250” 3.688” 3.813”

Part Number (Selective Keys) 42ST0325 42ST0368 42ST0400Part Number (Positive Keys) 42ST1325 42ST1368 42ST1400Unit Price 3420.00 3795.00 3680.00

COMPONENTSTop Sub 42B00750 42B00740 42C01441

785.00 868.00 818.00

Body 42B00751 42B00742 42C01443971.00 1031.00 999.00

Upper Key Retainer 42B00752 42B00743 42B01438169.00 174.00 155.00

Lower Key Retainer 42B00753 42B00744 42B01436208.00 208.00 190.00

Key 434.00 ea. 514.00 ea. 477.00 ea.

Selective (2) 42B01200 (2) 42B00745 (2) 42C01445Positive (2) 42B01201 (2) 42B00747 (2) 42C01444

Key Spring (2) 90A00918 (4) 90B01067 (2) 90A0091837.00 ea. 32.00 ea. 37.00 ea.

Collet 42B00755 42B00741 42C01439636.00 598.00 566.00

Retainer ******** 42B00739 ********238.00




moc.tni-sloot.www




G-8

SELECTIVE SHIFTING TOOLThe Selective Shifting Tool isdesigned to selectively locate andshift sliding side doors only to thedown position. The tool is madeselective by the lower locating sectionwhich functions in the same manneras the locating section of the “TICX”Running Tool.

SNOITACIFICEPS"2"2"2"2"2 "2/12 "2/12 "2/12 "2/12 "2/12 "057.2 "057.2 "057.2 "057.2 "057.2 "318.2 "318.2 "318.2 "318.2 "318.2

.D.OkcenhsiF "573.1 "057.1 "313.2 "313.2noitcennoCniP 01-"61/51 01-"61/51 01-"61/11 01-"61/11noitcennoCxoB 01-"61/51 01-"61/51 01-"61/11 01-"61/11

)detcarteRsyeK(.D.O "828.1 "182.2 "817.2 "047.2)dednapxEsyeK(.D.O "881.2 "046.2 "651.3 "912.3

htgneLpUedaM "052.91 "052.91 "000.81 "000.81wercSteS "4/1x61-"8/3 "4/1x61-"8/3 "61/5x61-"8/3 "61/5x61-"8/3

)dednapxEsgoD(.D.O "839.1 "573.2 "448.2 "609.2)detcarteRsgoD(.D.O "057.1 "360.2 "886.2 "047.2


SELECTIVE SHIFTING TOOLASSEMBLY 2” 2 1/2” 2.750” 2.813”

Part Number 42SEL200 42SEL250 42SEL300 42SEL281Unit Price 1800.00 2050.00 2390.00 2390.00


305.00 333.00 389.00 389.00


Selective Key (2) 42B00077 (2) 42B00200 (2) 42B01076 (2) 42B00700117.00 ea. 131.00 ea. 171.00 ea. 171.00 ea.

Upper Key Retainer 42A00193 42A00196 42B00822 42B0082238.00 52.00 58.00 58.00

Lower Key Retainer 42A00194 42A00195 42B00823 42B0082340.00 57.00 62.00 62.00

Spring Housing 42B00263 42A00264 42B00281 42B00281204.00 231.00 273.00 273.00

Dog Retainer 42B00264 42B00265 42B00282 42B00282484.00 509.00 523.00 523.00

Locator Dog (2) 41C00726 (2) 41A00863 (2) 41B00113 (2) 41B0011497.00 ea. 120.00 ea. 146.00 ea. 146.00 ea.

Dog Spring 90N01220 90N01221 90N01225 90N0122549.00 56.00 56.00 56.00

Core Spring 90B00982 90A00964 90A01139 90A0113956.00 78.00 77.00 77.00

Split Ring (2) 41A00644 (2) 41B00732 (2) 41B00112 (2) 41B0011226.00 ea. 36.00 ea. 44.00 ea. 44.00 ea.

Locator Mandrel 42B00261 42B00267 42B00283 42B00283318.00 342.00 405.00 405.00

G-10



moc.tni-sloot.www




H-1Prices effective June 1, 2012 1-800-338-0308

H

RUNNING TOOLS

H-2

“C-1” RUNNING TOOLThe “C-1” Running Tool is capable ofrunning and landing several types ofBaker Style locks and plugs.

SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS"4/31,"2/11 "4/31,"2/11 "4/31,"2/11 "4/31,"2/11 "4/31,"2/11 "2"2"2"2"2 "2/12 "2/12 "2/12 "2/12 "2/12 "3"3"3"3"3 "4"4"4"4"4

.D.OkcenhsiF "881.1 "573.1 "057.1 "313.2 "521.3noitcennoCniP 01-"61/51 01-"61/51 01-"61/51 01-"61/11 01-"61/11htgneLpUedaM "578.5 "052.6 "578.5 "057.5 "052.8

wercSteS "8/3x02-"4/1 "8/3x02-"4/1 "8/3x02-"4/1 "8/3x02-"4/1 "8/3x02-"4/1sniPraehS "8/31x"8/1 "61/111x"61/3 "8/12x"61/3 "8/52x"61/3 "2/13x"61/3


“C-1” RUNNING TOOLASSEMBLY 1 1/2”, 1 3/4” 2”

Part Number 41CR0150 41CR0200Unit Price 465.00 515.00

COMPONENTSBody 41A01062 41A01063

302.00 317.00

No Go Rings 60.00 ea. 63.00 ea.

41A01020 41A0102841A01022 41A0103041A01024 41A0103241A01026

Thread Protector 41A01046 41A0105060.00 63.00

ASSEMBLY 2 1/2” 3” 4”Part Number 41CR0250 41CR0300 41CR0400Unit Price 575.00 710.00 855.00

COMPONENTSBody 41A01064 41A01065 41A01066

401.00 530.00 631.00

No Go Rings 74.00 ea. 78.00 ea. 100.00 ea.

41A01034 41A01038 41A0104241A01036 41A01040 41A01044

Thread Protector 41A01052 41A01054 41A0105674.00 78.00 100.00

H-4

“DB” RUNNING TOOLThe “DB” Series Running Tool isdesigned to run the same equipmentas the “D” Series Running Tool withthe addition of an “A” Blanking Plugattached to the lock.


.D.OkcenhsiF "573.1 "573.1noitcennoCniP 01-"61/51 01-"61/51

.D.O.xaM "958.1 "692.2htgneLpUedaM

denepOdesolC

"864.81 "318.51

"812.51 "052.41

sniPraehS "4/31x"61/3 "4/12x"61/3


“D” RUNNING TOOL(CAMCO TYPE)

The “D” Series Running Tool isdesigned to run a “C” Series No-GoLock into a “D” Series No-Go LandingNipple.



.D.O.xaM "958.1 "692.2 "697.2htgneLpUedaM

denepOdesolC

"135.51 "318.51 "886.71

"052.21 "052.41 "521.61

sniPraehS "4/31x"61/3 "4/12x"61/3 "4/32x"61/3

H-6

“DB” RUNNING TOOLASSEMBLY 2” 2 1/2”

Part Number 41DB0200 41DB0250Unit Price 710.00 755.00

COMPONENTSSkirt 41B01254 41B01256

367.00 380.00

Plunger 41B01253 41B01257230.00 278.00

Fishneck 41B01255 41B01251140.00 186.00

“D” RUNNING TOOL (CAMCO TYPE)

ASSEMBLY 2” 2 1/2” 3”Part Number 41D02200 41D02250 41D02300Unit Price 645.00 735.00 820.00

COMPONENTSSkirt 41B01259 41B01256 41B01261

344.00 380.00 434.00

Plunger 41B01253 41B01258 41B01260230.00 255.00 288.00

Fishneck 41B01255 41B01251 41B01262140.00 186.00 230.00




moc.tni-sloot.www




H-8

“D” RUNNING TOOLThe “D” Running tool is used to runthe “D” Lock and/or “DD” Bridge Plug.



.D.O.xaM "043.1 "057.1 "521.2htgneLpUedaM "005.21 "609.21 "578.21

niPraehS "61/31x"4/1 "8/51x"4/1 "2x"4/1wercSteS "4/1x02-"4/1 "4/1x02-"4/1 "4/1x02-"4/1


“D” RUNNING TOOLASSEMBLY 2” 2 1/2” 3”



140.00 140.00 173.00

Housing 41B01276 41B01272 41B01282173.00 186.00 207.00

Core 41B01273 41B01270 41B01280163.00 173.00 186.00

Collet 41B01275 41B01271 41B01284255.00 288.00 344.00

Shear Pin Cover 41B01277 41B01268 41B0128399.00 106.00 118.00

H-10

“J” RUNNING TOOL

Size 1 1/4” 1 1/2” 2”Part Number 41J01125 41J01150 41J01200Unit Price 260.00 260.00 260.00

Size 2 1/2” 3” 4”Part Number 41J01250 41J01300 41J01400Unit Price 290.00 330.00 355.00

The “J” Running Tool is used to runand set the “S” Lock Mandrel.


.D.OkcenhsiF "000.1 "881.1 "573.1 "573.1 "313.2 "313.2noitcennoCniP 11-"8/5 01-"61/51 01-"61/51 01-"61/51 01-"61/11 01-"61/11noitcennoCxoB 61-"8/3 61-"8/3 31-"2/1 31-"2/1 11-"8/5 21-"4/11

.D.O.xaM "521.1 "024.1 "526.1 "521.2 "005.2 "005.3htgneLpUedaM "573.2 "005.3 "886.3 "886.3 "526.4 "360.5

sniPraehS "61/11x"8/1 "8/31x"8/1 "61/91x"61/3 "61/12x"61/3 "61/72x"61/3 "61/73x"61/3

H-1 1Prices effective June 1, 2012 1-800-338-0308

“P” RUNNING TOOL

Size 1 1/4” 1 1/2” 2”Part Number 41P00125 41P00150 41P00200Unit Price 225.00 225.00 225.00

Size 2 1/2” 3” 4”Part Number 41P00250 41P00300 41P00400Unit Price 270.00 295.00 355.00

The “P” Running Tool is used to runand set the “PS” and “PN” lock andplug assembly.


.D.OkcenhsiF "000.1 "881.1 "573.1 "057.1 "313.2 "313.2noitcennoCniP 11-"8/5 01-"61/51 01-"61/51 01-"61/51 01-"61/11 01-"61/11

.D.O.xaM "881.1 "024.1 "886.1 "000.2 "005.2 "005.3htgneLpUedaM "000.5 "000.5 "005.6 "005.6 "578.5 "000.7

sniPraehS "8/11x"8/1 "8/31x"8/1 "8/51x"61/3 "61/511x"61/3 "61/72x"61/3 "61/73x"61/3

H-12

“G” STOP RUNNING TOOLThe “G” Stop Running Tool is used torun and set the “G” Stop Anchor.


.D.OkcenhsiF "573.1 "573.1noitcennoCniP 01-"61/51 01-"61/51htgneLpUedaM "881.03 "521.13

)detcarter(spilS.D.O "218.1 "572.2)dednapxE(spilS.D.O "510.2 "005.2

niPraehS "61/311x"8/1 "61/32x"8/1wercSteS "61/5x02-"4/1 "2/1x61-"8/3


“G” STOP RUNNING TOOLASSEMBLY 2” 2 1/2”

Part Number 41G00200 41G00250Unit Price 1300.00 1335.00


178.00 168.00

Expander 41B01515 41B01519190.00 182.00

Slip (4) 41B01516 (4) 41B01517110.00 ea. 115.00 ea.

Slip Retainer 10B01478 41B01518217.00 270.00

Mandrel ******** 41B01335225.00

Stop ******** 41B0152161.00

Core 41B01612 41B01613291.00 291.00

Spacer ******** 41B0152339.00

O-ring (2) #115.75 ea.

H-14

“TIC” SELECTIVE RUNNING TOOLThe “TIC” Selective Running tool wasdesigned as an alternative to the“TICX” and “TICR” Running Tools. Ituses a collet design to locate thedesired landing nipple. With an easychange of the collet and/or the lowercore, the tool can effectively run andset any “TICX” and “TICR” LockMandrel within a specific tubing size.


.D.OkcenhsiF "573.1 "057.1 "313.2noitcennoCniP 01-"61/51 01-"61/51 01-"61/11daerhTmottoB 31-"2/1 11-"8/5 01-"4/3htgneLpUedaM "052.92 "052.92 "526.92

niPraehS "4/11x"4/1 "61/71x"4/1 "61/511x"4/1

s'.D.OtelloCRCIT"187.1 "448.1

rcit/xcit"578.1 "839.1RCIT"000.2 "360.2RCIT"521.2 "881.2RCIT"881.2 "052.2

rcit/xcit"313.2 "573.2RCIT"265.2 "526.2XCIT"057.2 "318.2XCIT"318.2 "578.2


“TIC” SELECTIVE RUNNING TOOL(United States Patent No. 4,745,973)

ASSEMBLY 2” 2 1/2” 3”Part Number 41SEL*** 41SEL*** 41SEL***Unit Price 1570.00 1635.00 1930.00

COMPONENTSTop Sub 41SEL101 41SEL201 41SEL301

258.00 272.00 305.00

*Collet 163.00 ea. 170.00 ea. 216.00 ea.

1.781” TICR *41SEL1021.875” TICX/TICR *41SEL1032.000” TICR *41SEL1042.125” TICR *41SEL1052.188” TICR *41SEL2022.313” TICX/TICR *41SEL2032.562” TICR *41SEL2042.750” TICX *41SEL3022.813” TICX *41SEL303

Housing 41SEL106 41SEL206 41SEL306305.00 322.00 354.00

Top Core 41SEL107 41SEL207 41SEL307123.00 126.00 163.00

Bottom Sub 41SEL108 41SEL208 41SEL308171.00 178.00 211.00

*Bottom Core 211.00 ea. 221.00 ea. 267.00 ea.

TICX *41SEL109 *41SEL209 *41SEL309TICR *41SEL110 *41SEL210 ********

Set Screw 1.00 1.00 1.00

3/8 x 16 x 3/8 41SEL1111/2 x 13 x 3/8 41SEL211 41SEL211

Lug Segment (2) 41SEL112 (2) 41SEL212 (2) 41SEL31234.00 ea. 34.00 ea. 48.00 ea.

Collet Spring 90NSEL11 90NSEL21 90NSEL3146.00 83.00 90.00

Shear Pin Ring 41SEL113 41SEL213 41SEL31384.00 86.00 99.00

Core Spring 90NSEL12 90NSEL22 90NSEL3259.00 69.00 72.00

Set Screw 3/8” 16 x 1/4 41SEL114 41SEL114 41SEL1141.00 1.00 1.00

Retainer Lug (2) 41SEL115 (2) 41SEL215 (2) 41SEL31534.00 ea. 34.00 ea. 48.00 ea.

Collet Washer 41SEL116 ******** ********56.00

* Assembly comes complete with one collet and one core. Please specify when ordering.

H-16

“TICR” / “TICX” RUNNING TOOLThe “TICX” and “TICR” RunningTools are used to run, locate, and setType “TICX”, “TICXN”, “TICR”, and“TICRN” Locks and subsurfacesafety equipment.

XCIT-SNOITACIFICEPS XCIT-SNOITACIFICEPS XCIT-SNOITACIFICEPS XCIT-SNOITACIFICEPS XCIT-SNOITACIFICEPS"005.1 "005.1 "005.1 "005.1 "005.1 "526.1 "526.1 "526.1 "526.1 "526.1 "578.1 "578.1 "578.1 "578.1 "578.1 "313.2 "313.2 "313.2 "313.2 "313.2 "057.2 "057.2 "057.2 "057.2 "057.2

.D.OkcenhsiF "881.1 "881.1 "573.1 "057.1 "313.2noitcennoCniP 01-"61/51 01-"61/51 01-"61/51 01-"61/51 01-"61/11daerhTmottoB 61-"8/3 61-"8/3 31-"2/1 11-"8/5 01-"4/3htgneLpUedaM "360.03 "360.03 "313.92 "052.03 "000.13

niPraehS x"61/3"8/11

x"61/3"8/11

x"4/1"2/11

x"4/1"8/71

x"4/1"2/12

sgoD.D.OdetcarteR

dednapxE

"014.1 "395.1 "057.1 "571.2 "817.2

"265.1 "276.1 "739.1 "953.2 "348.2

segagnENF "260.1 "260.1 "573.1 "218.1 "313.2

"318.2 "318.2 "318.2 "318.2 "318.2 "578.2 "578.2 "578.2 "578.2 "578.2 "313.3 "313.3 "313.3 "313.3 "313.3 "318.3 "318.3 "318.3 "318.3 "318.3.D.OkcenhsiF "313.2 "313.2 "313.2 "313.2noitcennoCniP 01-"61/11 01-"61/11 01-"61/11 01-"61/11daerhTmottoB 01-"4/3 01-"4/3 21-"8/31 21-"8/12htgneLpUedaM "000.13 "000.13 "604.23 "573.23

niPraehS x"4/1"2/12

x"4/1"2/12

x"4/1"8/72

x"4/1"4/13

sgoD.D.OdetcarteR

dednapxE

"817.2 "448.2 "052.3 "057.3

"609.2 "839.2 "604.3 "098.3

segagnENF "313.2 "313.2 "526.2 "521.3

RCIT-SNOITACIFICEPS RCIT-SNOITACIFICEPS RCIT-SNOITACIFICEPS RCIT-SNOITACIFICEPS RCIT-SNOITACIFICEPS"017.1 "017.1 "017.1 "017.1 "017.1 "187.1 "187.1 "187.1 "187.1 "187.1 "578.1 "578.1 "578.1 "578.1 "578.1 "000.2 "000.2 "000.2 "000.2 "000.2 "521.2 "521.2 "521.2 "521.2 "521.2

.D.OkcenhsiF "881.1 "573.1 "573.1 "573.1 "573.1noitcennoCniP 01-"61/51 01-"61/51 01-"61/51 01-"61/51 01-"61/51daerhTmottoB 61-"8/3 31-"2/1 31-"2/1 31-"2/1 31-"2/1htgneLpUedaM "360.03 "313.92 "313.92 "313.92 "313.92


x"4/1"2/11

x"4/1"2/11

x"4/1"2/11

x"4/1"2/11

sgoD.D.OdetcarteR

dednapxE

"046.1 "057.1 "057.1 "839.1 "360.2

"067.1 "828.1 "739.1 "360.2 "561.2

segagnENF "260.1 "573.1 "573.1 "573.1 "573.1

"881.2 "881.2 "881.2 "881.2 "881.2 "313.2 "313.2 "313.2 "313.2 "313.2 "265.2 "265.2 "265.2 "265.2 "265.2 "886.3 "886.3 "886.3 "886.3 "886.3.D.OkcenhsiF "057.1 "057.1 "057.1 "313.2noitcennoCniP 01-"61/51 01-"61/51 01-"61/51 01-"61/11daerhTmottoB 11-"8/5 11-"8/5 11-"8/5 21-"8/71htgneLpUedaM "313.92 "313.92 "052.03 "176.13

niPraehS x"4/1"8/71

x"4/1"8/71

x"4/1"8/71

x"4/1"4/13

sgoD.D.OdetcarteR

dednapxE

"571.2 "571.2 "005.2 "016.3

"792.2 "953.2 "176.2 "057.3

segagnENF "218.1 "218.1 "218.1 "521.3


“TICR” RUNNING TOOLASSEMBLY 1.710” 1.781” 1.875” 2.000”

Part Number 41TICR01171 41TICR01178 41TICR01188 41TICR01200Unit Price 1700.00 1560.00 1560.00 1560.00Unit Price (With Inconel Springs) 1830.00 1620.00 1620.00 1620.00

COMPONENTSMandrel Sub Assembly 41TICX05150 41TICX05200 41TICX05200 41TICX05200

730.00 605.00 605.00 605.00

Core 41C00080 41C00056 41C00056 41C00056409.00 409.00 409.00 409.00

Dog Spring 90A01495 90N01220 90N01220 90N0122040.00 49.00 49.00 49.00

Core Spring 90A01494 90B00982 90B00982 90B0098264.00 56.00 56.00 56.00

Split Ring (2) 41A00495 (2) 41A00644 (2) 41A00644 (2) 41A0064431.00 ea. 26.00 ea. 26.00 ea. 26.00 ea.

Lug Segment (2) 41A00494 (2) 41A00994 (2) 41A00994 (2) 41A0099427.00 ea. 22.00 ea. 22.00 ea. 22.00 ea.

Locator Dog (2) 41B00486 (2) 41B00849 (2) 41C00726 (2) 41B00850117.00 ea. 117.00 ea. 97.00 ea. 117.00 ea.

Retainer Dog (2) 41A00490 (2) 41B00483 (2) 41B00483 (2) 41B0048378.00 ea. 78.00 ea. 78.00 ea. 78.00 ea.

Dog Retainer 41B00498 41B00727 41B00727 41B00851339.00 282.00 282.00 339.00

Spring Housing 41A00489 41A00725 41A00725 41A0072593.00 93.00 93.00 93.00

Retainer Pin 41A00493 41A01019 41A01019 41A0101963.00 63.00 63.00 63.00

INCONEL SPRINGS (OPTIONAL)Dog Spring 90N01219 90N01220 90N01220 90N01220

49.00 49.00 49.00 49.00

Core Spring 90N00219 90N00220 90N00220 90N00220163.00 119.00 119.00 119.00

H-18

“TICR” RUNNING TOOLASSEMBLY 2.125” 2.188” 2.313”

Part Number 41TICR01213 41TICR01218 41TICR01231Unit Price 1560.00 1620.00 1620.00Unit Price (With Inconel Springs) 1620.00 1845.00 1845.00

COMPONENTSMandrel Sub Assembly 41TICX05200 41TICX05250 41TICX05250

605.00 705.00 705.00

Core 41C00056 41B00358 41B00358409.00 448.00 448.00

Dog Spring 90N01220 90N01221 90N0122149.00 56.00 56.00

Core Spring 90B00982 90A00964 90A0096456.00 78.00 78.00

Split Ring (2) 41A00644 (2) 41B00732 (2) 41B0073226.00 ea. 36.00 ea. 36.00 ea.

Lug Segment (2) 41A00994 (2) 41A00960 (2) 41A0096022.00 ea. 22.00 ea. 22.00 ea.

Locator Dog (2) 41B00848 (2) 41B01132 (2) 41A0086397.00 ea. 120.00 ea. 120.00 ea.

Retainer Dog (2) 41B00483 (2) 41B00965 (2) 41B0096578.00 ea. 89.00 ea. 89.00 ea.

Dog Retainer 41B00482 41B00202 41B00202339.00 298.00 298.00

Spring Housing 41A00725 41A00201 41A0020193.00 103.00 103.00

Retainer Pin 41A01019 41A00733 41A0073363.00 45.00 45.00

INCONEL SPRINGS (OPTIONAL)Dog Spring 90N01220 90N01221 90N01221

49.00 56.00 56.00

Core Spring 90N00220 90N00221 90N00221119.00 152.00 152.00


“TICR” RUNNING TOOLASSEMBLY 2.562” 3.688”

Part Number 41TICR01256 41TICR01368Unit Price 1620.00 3210.00Unit Price (With Inconel Springs) 1690.00 3390.00

COMPONENTSMandrel Sub Assembly 41TICX05250 41TICR05368

705.00 945.00

Core 41B00350 41B00570448.00 699.00

Dog Spring 90N01221 90B0080156.00 71.00

Core Spring 90A00964 90B0080278.00 94.00

Split Ring (2) 41B00732 (2) 41A0032636.00 ea. 58.00 ea.

Lug Segment (2) 41A00960 (2) 41A0032422.00 ea. 44.00 ea.

Locator Dog (2) 41B00864 (2) 41B00575120.00 ea. 225.00 ea.

Retainer Dog (2) 41B00965 (2) 41B0032889.00 ea. 125.00 ea.

Dog Retainer 41B00863 41B00579298.00 460.00

Spring Housing 41A00201 41B00573103.00 215.00

Retainer Pin 41A00733 41A0032745.00 59.00

Pin ******** 41A0032831.00

INCONEL SPRINGS (OPTIONAL)Dog Spring 90N01221 90N01229

56.00 74.00

Core Spring 90N00221 90N00229152.00 192.00

H-20

“TICX” RUNNING TOOLASSEMBLY 1.500” 1.625” 1.875”

Part Number 41TICX01150 41TICX01163 41TICX01200Unit Price 1700.00 1700.00 1560.00Unit Price (With Inconel Springs) 1830.00 1830.00 1620.00


730.00 730.00 605.00

Core 41C00080 41C00080 41C00081409.00 409.00 341.00

Dog Spring 90A01495 90A01495 90N0122040.00 40.00 49.00

Core Spring 90A01494 90A01494 90B0098264.00 64.00 56.00

Split Ring (2) 41A00495 (2) 41A00495 (2) 41A0064431.00 ea. 31.00 ea. 26.00 ea.


Locator Dog (2) 41B00431 (2) 41B00750 (2) 41C00726117.00 ea. 117.00 ea. 97.00 ea.

Retainer Dog (2) 41A00490 (2) 41A00490 (2) 41B0048378.00 ea. 78.00 ea. 78.00 ea.

Dog Retainer 41B00980 41B00751 41B00727339.00 339.00 282.00


Retainer Pin 41A00493 41A00493 41A0101963.00 63.00 63.00


49.00 49.00 49.00

Core Spring 90N00219 90N00219 90N00220163.00 163.00 119.00





705.00 790.00 790.00

Core 41B00350 41B00111 41B00111448.00 500.00 500.00

Dog Spring 90N01221 90N01225 90N0122556.00 56.00 56.00

Core Spring 90A00964 90A01139 90A0113978.00 77.00 77.00

Split Ring (2) 41B00732 (2) 41B00112 (2) 41B0011236.00 ea. 44.00 ea. 44.00 ea.


Locator Dog (2) 41A00863 (2) 41B00113 (2) 41B00114120.00 ea. 146.00 ea. 146.00 ea.


Dog Retainer 41B00202 41B00206 41B00206298.00 337.00 337.00


Retainer Pin 41A00733 41A00203 41A0020345.00 45.00 45.00


56.00 56.00 56.00

Core Spring 90N00221 90N00225 90N00225152.00 231.00 231.00

H-22




790.00 1350.00 1230.00

Core 41B00111 41B00557 41B00321500.00 734.00 583.00

Dog Spring 90N01225 90A01118 90B0080156.00 37.00 71.00

Core Spring 90A01139 90A01117 90B0080277.00 61.00 94.00

Split Ring (2) 41B00112 (2) 41B00551 (2) 41A0032644.00 ea. 61.00 ea. 58.00 ea.

Lug Segment (2) 41A00040 (2) 41B00550 (2) 41A0032426.00 ea. 49.00 ea. 44.00 ea.

Locator Dog (2) 41A00140 (2) 41B00554 (2) 41B00326175.00 ea. 260.00 ea. 206.00 ea.


Dog Retainer 41A00141 41B00556 41B00322399.00 453.00 420.00

Spring Housing 41A00204 41B00552 41A00323146.00 229.00 178.00

Retainer Pin 41A00203 41B00553 41A0032745.00 84.00 59.00

Pin ******** ******** 41A0032831.00


56.00 96.00 74.00

Core Spring 90N00225 90N00227 90N00229231.00 146.00 192.00




moc.tni-sloot.www




H-24

“W” RUNNING TOOLThe “W” Running Tool is designed tothe the “B”, “C”, and “W” LockMandrels.

SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS"2/11 "2/11 "2/11 "2/11 "2/11 "2/12,"2 "2/12,"2 "2/12,"2 "2/12,"2 "2/12,"2 "3"3"3"3"3 "4"4"4"4"4

.D.OkcenhsiF "881.1 "573.1 "057.1 "313.2noitcennoCniP 01-"61/51 01-"61/51 01-"61/11 01-"61/11htgneLpUedaM "343.9 "834.01 "000.01 "057.9

)2(niPraehS "8/3x"4/1 "8/3x"61/5 "2/1x"61/5 "8/5x"61/5segagnE "886.0 "318.0&"000.1 "005.1 "609.1

.D.O.xaM "573.1 "005.1 "052.2 "057.2


“W” RUNNING TOOLASSEMBLY 1 1/2” 2”, 2 1/2” 3” 4”

Part Number 41W01150 41W01200 41W01300 41W01400Unit Price 530.00 530.00 825.00 1040.00

COMPONENTSFishneck 41B01245 41A00655 41B01316 41B01242

137.00 137.00 228.00 281.00

Housing 41B01247 41A00654 41B01318 41B01241137.00 137.00 228.00 281.00

Sleeve 41B01248 41A00653 41B01315 41B0124382.00 88.00 136.00 182.00

Collet 41B01249 41B00604 41B01317 41B01239171.00 171.00 272.00 305.00

Prong 41B01244 41A00656 41B01319 41B0124087.00 88.00 136.00 182.00

H-26

“GA-2” RUNNING TOOL

Part Number 41GA2000Unit Price 290.00

“JA” RUNNING TOOL

Part Number 41JA0000Unit Price 235.00

The “GA-2” Running Tool is used inconjunction with the “L” or “K”Kickover Tool to install 1” bottomlatch valves into side pocketmandrels.

The “JA” Running Tool is used toinstall the “AK” Type Latch with an“AK-1” Valve in a “KA” seriesmandrel.

SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS.D.OkcenhsiF "881.1noitcennoCniP 01-"61/51htgneLpUedaM "573.3

sniPlloR "8/7x"8/1sniPraehS "8/7x"8/1

.D.O.xaM "881.1


sniPraehS "1x"8/1.D.O.xaM "881.1


“JC-3” RUNNING TOOL

Part Number 41JC3000Unit Price 250.00

The “JC-3” Running Tool is used torun the “R” or “RA” Type Latch in theappropriate “MM” Series Mandrel.


sniPraehS "8/51x"61/3.D.O.xaM "057.1

H-28

“JC-3” RUNNING TOOL (LONG)

Part Number 41JC3001Unit Price 250.00

The “JC-3” Running Tool is used torun the “R” or “RA” Type Latch in theappropriate “MM” Series Mandrel.




“JDK” RUNNING TOOL

Part Number 41JDK000Unit Price 235.00

The “JDK” Running Tool is used torun the Type “BK” Latch in theappropriate “KC” Series Mandrel.



H-30

“JK” RUNNING TOOL

Part Number 41JK0001Unit Price 195.00

The “JK” Running Tool, in conjuctionwith a kickover tool, is used to installthe “BK” and “BK-2” Latches in sidepocket mandrels.




“RK-1” RUNNING TOOL

Part Number 41RK1000Unit Price 245.00

The “RK-1” Running Tool is used torun the “RK-1” or “RKP” Latch in theappropriate “MMG” Series Mandrel.



H-32



moc.tni-sloot.www




I-1Prices effective June 1, 2012 1-800-338-0308

I

PULLING TOOLS

I-2

“GG” FISHING SOCKETThe “GG” Fishing Socket is a non-releasable pulling tool primarily usedto extract prongs from “PS” and “PN”Plugs.

SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS"1x"2 "1x"2 "1x"2 "1x"2 "1x"2 "61/31x"2 "61/31x"2 "61/31x"2 "61/31x"2 "61/31x"2 "8/31x"2 "8/31x"2 "8/31x"2 "8/31x"2 "8/31x"2



)eziskcenhsiF(sbarG NF"1 NF"61/31 NF"8/31


“GG” FISHING SOCKETASSEMBLY 2” X 1” 2” X 1 3/16” 2” X 1 3/8”

Part Number 52G01200 52G04200 52G02138Unit Price 790.00 790.00 790.00


173.00 173.00 173.00

Skirt 52B00435 52B01659 52B01635258.00 258.00 357.00

Nose 52A00452 52B01657 ********173.00 173.00

Dog 52B00574 52B01653 52B00871258.00 258.00 258.00

I-4

“GR” ADAPTERThe “GR” Adapter is used inconjunction with the “GS” Pulling Toolto convert it into a “jar up to release”type tool.

SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS"2/11 "2/11 "2/11 "2/11 "2/11 "2"2"2"2"2 "2/12 "2/12 "2/12 "2/12 "2/12 "4,"3 "4,"3 "4,"3 "4,"3 "4,"3 "5"5"5"5"5 "7"7"7"7"7

.D.OkcenhsiF "881.1 "573.1 "057.1 "313.2 "521.3 "521.3noitcennoCniP 01-"61/51 01-"61/51 01-"61/51 01-"61/11 01-"61/11 01-"61/11

.D.O.xaM "064.1 "318.1 "521.2 "527.2 "000.4 "578.5

niPraehS "61/51x"4/1 "61/111x"61/5 "2x"61/5 "2/12x"8/3 "61/313x"61/5 "61/53x"8/3

noitcennoCxoB 01-"61/51 01-"61/51 01-"61/51 01-"61/11 01-"61/11 01-"61/11

htgneLpUedaM "573.8 "573.8 "578.8 "313.9 "057.01 "656.31


“GR” ADAPTERASSEMBLY 1 1/2” 2” 2 1/2”

Part Number 40GR1150 40GR1200 40GR1250Unit Price 625.00 625.00 645.00

COMPONENTSFishneck 40B01294 40B00468 40C01188

368.00 368.00 400.00

Pin 40A01295 40A01289 40A0119030.00 30.00 33.00

Band 40A01296 40A01288 40A0118938.00 38.00 45.00

Core Nut 40A01293 40B01191 40B01191194.00 194.00 194.00

ASSEMBLY 3”, 4” 5” 7”Part Number 40GR1300 40GR1500 40GR1700Unit Price 750.00 2885.00 3215.00

COMPONENTSFishneck 40C01284 40A01282 40C00075

443.00 1789.00 1338.00

Pin 40A01287 40A01281 40C0007737.00 143.00 154.00

Band 40A01285 40A01280 40C0007465.00 118.00 118.00

Cylinder ******** ******** 40C00076783.00

Core Nut 40B01286 40A01283 40C00078210.00 861.00 812.00

I-6

“GS” PULLING TOOLThe “GS” Running/Pulling Tool is ashear down releasing tool used to runor pull subsurface devices which haveinternal fishing necks.

SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS"2/11 "2/11 "2/11 "2/11 "2/11 "2"2"2"2"2 "2/12 "2/12 "2/12 "2/12 "2/12 "3"3"3"3"3 "2/13 "2/13 "2/13 "2/13 "2/13 "4"4"4"4"4 "5"5"5"5"5

.D.OkcenhsiF "881.1 "573.1 "057.1 "313.2 "313.2 "313.2 "521.3

noitcennoCniP 01-"61/51 01-"61/51 01-"61/51 01-"61/11 01-"61/11 01-"61/11 01-"61/11

.D.O.xaM "964.1 "057.1 "061.2 "917.2 "001.3 "526.3 "005.4

noitcennoCmottoB 31-"2/1 31-"2/1 11-"8/5 11-"8/5 21-"8/31 21-"8/12 01-"2/12

niPraehSx"61/3"23/71

x"4/1"46/931

x"4/1"23/131

x"4/1"46/132

x"61/5"23/322

x"61/5"46/323

x"61/5"4/14

segagnEkcenhsiF "260.1 "573.1 "218.1 "313.2 "526.2 "521.3 "000.4

hcaeR "912.1 "302.1 "302.1 "912.1 "052.1 "302.1 "052.1

htgneLpUedaM "057.01 "526.11 "578.11 "521.21 "573.21 "573.11 "005.71

wercSteSx02-"4/1"4/1

x02-"4/1"4/1

x02-"4/1"4/1

x02-"4/1"61/5

x02-"4/1"61/5

x02-"4/1"61/5

x02-"4/1"8/3


“GS” PULLING TOOLASSEMBLY 1 1/2” 2” 2 1/2” 3”

Part Number 40GS1150 40GS1200 40GS1250 40GS1300Unit Price 1190.00 1190.00 1260.00 1455.00

With Inconel Springs ******** 40GS1200-INC 40GS1250-INC 40GS1300-INCUnit Price 1210.00 1295.00 1450.00

COMPONENTSFishneck 40B01292 40A00432 40A00152 40A00026

105.00 117.00 124.00 190.00

Core 40B01155 40B00857 40B00858 40B00030184.00 184.00 197.00 274.00

Top Sub 40B01297 40A00192 40A00084 40A00661184.00 184.00 190.00 205.00

Cylinder 40B01098 40A00668 40B00155 40B00029264.00 264.00 285.00 349.00

Core Spring 90A01503 90A00804 90A00844 90A0114129.00 30.00 37.00 86.00

Spring Retainer 40A01291 40A00086 40A00890 40A0002579.00 79.00 97.00 114.00

Dog Spring 90A01504 90N01232 90N01233 90N0123729.00 37.00 50.00 90.00

Dog Retainer 40A01297 40B00041 40A00153 40B00144192.00 192.00 205.00 240.00

Dog (3) 40B00830 (4) 40A00087 (4) 40A00154 (4) 40A0002490.00 ea. 90.00 ea. 97.00 ea. 105.00 ea.

INCONEL SPRINGS (OPTIONAL)Core Spring ******** 90N00232 90N00233 90N00237

50.00 59.00 88.00

Dog Spring ******** 90N01232 90N01233 90N0123737.00 50.00 90.00

REPINNING TOOL (OPTIONAL)******** 40GS0200 40GS0250 40GS0300

165.00 170.00 185.00

CORE EXTENSION (OPTIONAL)******** 40A00864 40A00892 40A00893

126.00 126.00 147.00

I-8

“GS” PULLING TOOLASSEMBLY 3 1/2” 4” 5”

Part Number 40GS1350 40GS1400 40GS1500Unit Price 2295.00 2885.00 3180.00

With Inconel Springs 40GS1350-INC 40GS1400-INC 40GS1500-INCUnit Price 2295.00 2885.00 3315.00

COMPONENTSFishneck 40A00026 40A00026 40B01279

190.00 190.00 259.00

Core 40B01071 40B00143 40B01280610.00 777.00 860.00

Top Sub 40B01278 40A00141 40B01281339.00 424.00 472.00

Cylinder 40B01277 40B00803 40C01281563.00 671.00 748.00

Core Spring 90N00237 90N00237 90B0080288.00 88.00 94.00

Spring Retainer 40B01072 40A00882 40B01507186.00 232.00 252.00

Dog Spring 90N01239 90N00143 90B0150699.00 79.00 78.00

Dog Retainer 40B01070 40B01062 40B01284373.00 497.00 549.00

Dog (4) 40B00145 (4) 40B00329 (4) 40B01177158.00 ea. 158.00 ea. 194.00 ea.

INCONEL SPRINGS (OPTIONAL)Core Spring 90N00237 90N00237 90N00229

88.00 88.00 192.00

Dog Spring 90N01239 90N00143 90N0124399.00 79.00 113.00




moc.tni-sloot.www




I-10

“GS” PULLING TOOL (NEW STYLE)

The “GS” Running/Pulling Tool is ashear down releasing tool used to runor pull subsurface devices which haveinternal fishing necks.

SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS"4"4"4"4"4 "5"5"5"5"5 "7"7"7"7"7


.D.O.xaM "526.3 "484.4 "578.5

noitcennoCmottoB 21-"8/12 01-"2/12 01-"8/53

niPraehS "4/13x"61/5 "46/514x"61/5 "23/35X"8/3

segagnEkcenhsiF "521.3 "000.4 "573.5

hcaeR "651.1 "302.1 "834.1

htgneLpUedaM "313.21 "881.71 "005.02

wercSteS "61/5x02-"4/1 "8/3x81-"61/5 enon

I-1 1Prices effective June 1, 2012 1-800-338-0308

“GS” PULLING TOOL (NEW STYLE)

ASSEMBLY 4” 5” 7”Part Number 40GS1401 40GS1501 40GS1596Unit Price 3090.00 4020.00 6270.00

COMPONENTSFishneck 40A00026 40B01178 40B01307

190.00 251.00 304.00

Core 40B00137 40B01179 40B01309803.00 1070.00 1271.00

Top Sub 40B00138 40B01180 40B01304424.00 538.00 593.00

Cylinder 40B00139 40B01181 40B01303673.00 714.00 961.00

Core Spring 90N00237 90B00802 90N0024588.00 94.00 522.00

Spring Retainer 40B00140 40B01182 40B01305232.00 290.00 303.00

Dog Spring 90N00143 90B01506 90N0124579.00 78.00 258.00

Dog Retainer 40B00141 40B01284 40B01302558.00 549.00 802.00

Dog (4) 40B00142 (4) 40B01177 (12) 40B01301158.00 ea. 194.00 ea. 134.00 ea.

Retainer Ring ******** ******** 40B01306272.00

Nut ******** 40B01285 40B01308204.00 204.00

I-12

“JD” SERIES PULLING TOOLThe “J” Series Pulling Tool, throughminor component changes, is a sheardown or shear up releasing tool usedin pulling subsurface devices whichhave external fishing necks. Toaccommodate the many differenttypes of devices, the core of the “J”Series tools is made in variouslengths and can be changed in thefield.

SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS"4/11 "4/11 "4/11 "4/11 "4/11 "8/31 "8/31 "8/31 "8/31 "8/31 "2/11 "2/11 "2/11 "2/11 "2/11 "8/51 "8/51 "8/51 "8/51 "8/51 "2"2"2"2"2 "2/12 "2/12 "2/12 "2/12 "2/12 "3"3"3"3"3 "4"4"4"4"4

.D.OkcenhsiF "881.1 "881.1 "881.1 "881.1 "573.1 "573.1 "057.1 "313.2

noitcennoCniP 01-"61/51 01-"61/51 01-"61/51 01-"61/51 01-"61/51 01-"61/51 01-"61/51 01-"61/11

.D.O.xaM "092.1 "573.1 "224.1 "526.1 "958.1 "052.2 "697.2 "057.3

noitcennoCmottoB 02-"4/1 02-"4/1 31-"2/1 31-"2/1 31-"2/1 31-"2/1 11-"8/5 21-"4/11


x"61/3"46/91

x"61/3"46/111

x"61/3"46/111

x"61/5"46/131

x"61/5"23/721

x"8/3"23/112

x"8/3"46/913

segagnEkcenhsiF "578.0 "000.1 "781.1 "781.1 "573.1 "057.1 "313.2 "521.3

hcaeR "609.1-CDJ"656.2-SDJ

"218.1-CDJ"265.2-SDJ

"390.1-CDJ"348.1-SDJ

"130.1-CDJ"187.1-SDJ

"734.1-CDJ"182.2-SDJ

"562.1-CDJ-SDJ "193.2

"346.1-CDJ"792.2-SDJ

"313.2-CDJ"573.3-SDJ

htgneLpUedaM "609.21 "000.31 "360.31 "000.31 "193.41 "567.41 "000.51 "390.91

wercsteS enoN enoN x02-"4/1"61/3

x02-"4/1"61/3

x81-"61/5"4/1

x61-"8/3"4/1

x41-"61/7"8/3

x41-"61/7"4/1


“JDC” PULLING TOOLASSEMBLY 1 1/4” 1 3/8” 1 1/2” 1 5/8”

Part Number 40JDC125 40JDC138 40JDC150 40JDC163Unit Price 845.00 845.00 880.00 880.00

With Inconel Springs 40JDC125-INC 40JDC138-INC 40JDC150-INC 40JDC163-INCUnit Price 900.00 900.00 930.00 930.00

COMPONENTS“D” Fishneck 40B00400 40B00400 40B00420 40B00420

130.00 130.00 151.00 151.00

“C” Core 40B00044 40B00044 40B00051 40B00051130.00 130.00 141.00 141.00

Dog 40B00413 40B00412 40B00640 40B00640206.00 206.00 226.00 226.00

Skirt 40B00417 40B00210 40B00638 40B00946249.00 249.00 278.00 278.00

Pawl (2) 40A00418 (2) 40A00419 (2) 40A00419 (2) 40A0041925.00 ea. 25.00 ea. 25.00 ea. 25.00 ea.

Core Cap 40A00449 40A00449 40A00639 40A0063933.00 33.00 33.00 33.00

Shear Pin Cover 40A00415 40A00415 ******** ********32.00 32.00

Spring Retainer 40A00414 40A00414 ******** ********88.00 88.00

Core Spring 90A01011 90A01011 90A01011 90A0101122.00 22.00 22.00 22.00

Dog Spring 90A01073 90A00951 90A00565 90A0056527.00 27.00 30.00 30.00

INCONEL SPRINGS (OPTIONAL)Core Spring 90N00101 90N00101 90N00101 90N00101

44.00 44.00 44.00 44.00

Dog Spring 90N01101 90N01102 90N01103 90N0110359.00 59.00 59.00 59.00

I-14

“JDC” PULLING TOOLASSEMBLY 2” 2 1/2” 3” 4”

Part Number 40JDC200 40JDC250 40JDC300 40JDC400Unit Price 880.00 950.00 1315.00 2355.00

With Inconel Springs 40JDC200-INC 40JDC250-INC 40JDC300-INC 40JDC400-INCUnit Price 950.00 1005.00 1370.00 2635.00

COMPONENTS“D” Fishneck 40B00215 40B00094 40B00949 40C01209

151.00 181.00 216.00 469.00

“C” Core 40B00052 40B00217 40B01091 40C01212141.00 151.00 198.00 308.00

Dog 40B00076 40B00058 40C01173 40C01174226.00 245.00 332.00 567.00

Skirt 40C00032 40C00045 40C00053 40C01208278.00 303.00 382.00 730.00


Core Cap 40A00962 40A00066 40B00563 40B0121333.00 48.00 65.00 105.00

Spring Cover ******** ******** ******** 40B01214148.00

Core Spring 90A00849 90A00952 90B00562 90B0150222.00 45.00 72.00 88.00

Dog Spring 90A00597 90A00598 90B01659 90B0150130.00 43.00 71.00 110.00


51.00 72.00 83.00 127.00

Dog Spring 90N01105 90N01109 90N01113 90N0111763.00 74.00 120.00 292.00


“JDS” PULLING TOOLASSEMBLY 1 1/4” 1 3/8” 1 1/2” 1 5/8”

Part Number 40JDS125 40JDS138 40JDS150 40JDS163Unit Price 845.00 845.00 880.00 880.00

With Inconel Springs 40JDS125-INC 40JDS138-INC 40JDS150-INC 40JDS163-INCUnit Price 900.00 900.00 930.00 930.00

COMPONENTS“D” Fishneck 40B00400 40B00400 40B00420 40B00420

130.00 130.00 151.00 151.00

“S” Core 40B00045 40B00045 40B00050 40B00050159.00 159.00 141.00 141.00

Dog 40B00413 40B00412 40B00640 40B00640206.00 206.00 226.00 226.00

Skirt 40B00417 40B00210 40B00638 40B00946249.00 249.00 278.00 278.00


Core Cap 40A00449 40A00449 40A00639 40A0063933.00 33.00 33.00 33.00



Core Spring 90A01011 90A01011 90A01011 90A0101122.00 22.00 22.00 22.00

Dog Spring 90A01073 90A00951 90A00565 90A0056527.00 27.00 30.00 30.00


44.00 44.00 44.00 44.00

Dog Spring 90N01101 90N01102 90N01103 90N0110359.00 59.00 59.00 59.00

I-16

“JDS” PULLING TOOLASSEMBLY 2” 2 1/2” 3” 4”

Part Number 40JDS200 40JDS250 40JDS300 40JDS400Unit Price 880.00 950.00 1315.00 2355.00

With Inconel Springs 40JDS200-INC 40JDS250-INC 40JDS300-INC 40JDS400-INCUnit Price 950.00 1005.00 1370.00 2635.00

COMPONENTS“D” Fishneck 40B00215 40B00094 40B00949 40C01209

151.00 181.00 216.00 469.00

“S” Core 40B00049 40B00216 40B01090 40C01211141.00 151.00 198.00 308.00

Dog 40B00076 40B00058 40C01173 40C01174226.00 245.00 332.00 567.00

Skirt 40C00032 40C00045 40C00053 40C01208278.00 303.00 382.00 730.00


Core Cap 40A00962 40A00066 40B00563 40B0121333.00 48.00 65.00 105.00

Spring Cover ******** ******** ******** 40B01214148.00

Core Spring 90A00849 90A00952 90B00562 90B0150222.00 45.00 72.00 88.00

Dog Spring 90A00597 90A00598 90B01659 90B0150130.00 43.00 71.00 110.00


51.00 72.00 83.00 127.00

Dog Spring 90N01105 90N01109 90N01113 90N0111763.00 74.00 120.00 292.00




moc.tni-sloot.www




I-18

“JU” SERIES PULLING TOOLThe “J” Series Pulling Tool, throughminor component changes, is a sheardown or shear up releasing tool usedin pulling subsurface devices whichhave external fishing necks. Toaccommodate the many differenttypes of devices, the core of the “J”Series tools is made in variouslengths and can be changed in thefield.

"2"2"2"2"2 "2/12 "2/12 "2/12 "2/12 "2/12 "3"3"3"3"3 "4"4"4"4"4.D.OkcenhsiF "573.1 "573.1 "057.1 "313.2noitcennoCniP 01-"61/51 01-"61/51 01-"61/51 01-"61/11

.D.O.xaM "958.1 "052.2 "797.2 "057.3noitcennoCmottoB 31-"2/1 31-"2/1 11-"8/5 21-"4/11

niPraehS "46/131x"61/5 "23/721x"61/5 "46/122x"8/3 "46/913x"8/3

segagnEkcenhsiF "573.1 "057.1 "213.2 "521.3hcaeR "521.2 "781.2 "521.2 "213.2

htgneLpUedaM "823.41 "057.41 "057.41 "260.91wercsteS "8/3x81-"61/5 "2/1x61-"8/3 "2/1x41-"61/7 "2/1x41-"61/7

CUJ-SNOITACIFICEPS CUJ-SNOITACIFICEPS CUJ-SNOITACIFICEPS CUJ-SNOITACIFICEPS CUJ-SNOITACIFICEPS"4/11 "4/11 "4/11 "4/11 "4/11 "8/31 "8/31 "8/31 "8/31 "8/31 "2/11 "2/11 "2/11 "2/11 "2/11 "8/51 "8/51 "8/51 "8/51 "8/51 "2"2"2"2"2 "2/12 "2/12 "2/12 "2/12 "2/12 "3"3"3"3"3 "4"4"4"4"4

.D.OkcenhsiF "881.1 "881.1 "881.1 "881.1 "573.1 "573.1 "057.1 "313.2noitcennoCniP 01-"61/51 01-"61/51 01-"61/51 01-"61/51 01-"61/51 01-"61/51 01-"61/51 01-"61/11

.D.O.xaM "092.1 "573.1 "224.1 "526.1 "958.1 "052.2 "797.2 "057.3mottoB

noitcennoC 02-"4/1 02-"4/1 31-"2/1 31-"2/1 31-"2/1 31-"2/1 11-"8/5 21-"4/11


x"61/3"46/91

x"61/3"46/111

x"61/3"46/111

x"61/5"46/131

x"61/5"23/721

x"8/3"46/122

x"8/3"46/913

segagnEkcenhsiF "578.0 "000.1 "781.1 "781.1 "573.1 "057.1 "313.2 "521.3hcaeR "739.1 "000.1 "390.1 "390.1 "734.1 "213.1 "734.1 "573.3

htgneLpUedaM "609.21 "182.21 "000.31 "839.21 "823.41 "057.41 "057.41 "260.91

wercsteS x02-"4/1"8/3

x02-"4/1"8/3

x02-"4/1"8/3

x02-"4/1"8/3

x81-"61/5"2/1

x61-"8/3"2/1

x41-"61/7"2/1

x41-"61/7"2/1

SUJ-SNOITACIFICEPS SUJ-SNOITACIFICEPS SUJ-SNOITACIFICEPS SUJ-SNOITACIFICEPS SUJ-SNOITACIFICEPS"4/11 "4/11 "4/11 "4/11 "4/11 "8/31 "8/31 "8/31 "8/31 "8/31 "2/11 "2/11 "2/11 "2/11 "2/11 "8/51 "8/51 "8/51 "8/51 "8/51

.D.OkcenhsiF "881.1 "881.1 "881.1 "881.1noitcennoCniP 01-"61/51 01-"61/51 01-"61/51 01-"61/51

.D.O.xaM "092.1 "573.1 "224.1 "526.1noitcennoCmottoB 02-"4/1 02-"4/1 31-"2/1 31-"2/1

niPraehS "46/91x"61/3 "46/91x"61/3 "23/51x"61/3 "46/111x"61/3

segagnEkcenhsiF "578.0 "000.1 "881.1 "881.1hcaeR "886.2 "526.2 "348.1 "348.1

htgneLpUedaM "609.21 "182.21 "000.31 "839.21wercsteS "8/3x02-"4/1 "8/3x02-"4/1 "61/5x02-"4/1 "61/5x02-"4/1


“JUC” PULLING TOOLASSEMBLY 1 1/4” 1 3/8” 1 1/2” 1 5/8”

Part Number 40JUC125 40JUC138 40JUC150 40JUC163Unit Price 845.00 845.00 880.00 880.00

With Inconel Springs 40JUC125-INC 40JUC138-INC 40JUC150-INC 40JUC163-INCUnit Price 900.00 900.00 930.00 930.00

COMPONENTS“U” Fishneck 40B00401 40B00401 40B01176 40B01176

157.00 157.00 151.00 151.00

“C” Core 40B00044 40B00044 40B00051 40B00051130.00 130.00 141.00 141.00

Dog 40B00413 40B00412 40B00640 40B00640206.00 206.00 226.00 226.00

Skirt 40B00417 40B00210 40B00638 40B00946249.00 249.00 278.00 278.00




Core Spring 90A01011 90A01011 90A01011 90A0101122.00 22.00 22.00 22.00

Dog Spring 90A01073 90A00951 90A00565 90A0056527.00 27.00 30.00 30.00


44.00 44.00 44.00 44.00

Dog Spring 90N01101 90N01102 90N01103 90N0110359.00 59.00 59.00 59.00

I-20

“JUC” PULLING TOOLASSEMBLY 2” 2 1/2” 3” 4”

Part Number 40JUC200 40JUC250 40JUC300 40JUC400Unit Price 880.00 950.00 1315.00 2355.00

With Inconel Springs 40JUC200-INC 40JUC250-INC 40JUC300-INC 40JUC400-INCUnit Price 950.00 1005.00 1370.00 2635.00

COMPONENTS“U” Fishneck 40B00963 40B00063 40B00950 40C01210

181.00 181.00 238.00 469.00

“C” Core 40B00052 40B00217 40B01091 40C01212141.00 151.00 198.00 308.00

Dog 40B00076 40B00058 40C01173 40C01174226.00 245.00 332.00 567.00

Skirt 40C00032 40C00045 40C00053 40C01208278.00 303.00 382.00 730.00


Spring Cover ******** ******** ******** 40B01214148.00

Core Spring 90A00849 90A00952 90B00562 90B0150222.00 45.00 72.00 88.00

Dog Spring 90A00597 90A00598 90B01659 90B0150130.00 43.00 71.00 110.00


51.00 72.00 83.00 127.00

Dog Spring 90N01105 90N01109 90N01113 90N0111763.00 74.00 120.00 292.00


“JUS” PULLING TOOLASSEMBLY 1 1/4” 1 3/8” 1 1/2” 1 5/8”

Part Number 40JUS125 40JUS138 40JUS150 40JUS163Unit Price 845.00 845.00 880.00 880.00

With Inconel Springs 40JUS125-INC 40JUS138-INC 40JUS150-INC 40JUS163-INCUnit Price 895.00 900.00 930.00 930.00

COMPONENTS“U” Fishneck 40B00401 40B00401 40B01176 40B01176

157.00 157.00 151.00 151.00

“S” Core 40B00045 40B00045 40B00050 40B00050159.00 159.00 141.00 141.00

Dog 40B00413 40B00412 40B00640 40B00640206.00 206.00 226.00 226.00

Skirt 40B00417 40B00210 40B00638 40B00946249.00 249.00 278.00 278.00




Core Spring 90A01011 90A01011 90A01011 90A0101122.00 22.00 22.00 22.00

Dog Spring 90A01073 90A00951 90A00565 90A0056527.00 27.00 30.00 30.00


44.00 44.00 44.00 44.00

Dog Spring 90N01101 90N01102 90N01103 90N0110359.00 59.00 59.00 59.00

I-22

“JUS” PULLING TOOLASSEMBLY 2” 2 1/2” 3” 4”

Part Number 40JUS200 40JUS250 40JUS300 40JUS400Unit Price 880.00 950.00 1315.00 2355.00

With Inconel Springs 40JUS200-INC 40JUS250-INC 40JUS300-INC 40JUS400-INCUnit Price 950.00 1005.00 1370.00 2635.00

COMPONENTS“U” Fishneck 40B00963 40B00063 40B00950 40C01210

181.00 181.00 238.00 469.00

“S” Core 40B00049 40B00216 40B01090 40C01211141.00 151.00 198.00 308.00

Dog 40B00076 40B00058 40C01173 40C01174226.00 245.00 332.00 567.00

Skirt 40C00032 40C00045 40C00053 40C01208278.00 303.00 382.00 730.00


Spring Cover ******** ******** ******** 40B01214148.00

Core Spring 90A00849 90A00952 90B00562 90B0150222.00 45.00 72.00 88.00

Dog Spring 90A00597 90A00598 90B01659 90B0150130.00 43.00 71.00 110.00


51.00 72.00 83.00 127.00

Dog Spring 90N01105 90N01109 90N01113 90N0111763.00 74.00 120.00 292.00




moc.tni-sloot.www




I-24

“PRS-2” PULLING TOOLThe “PRS” Series Pulling Tool is ashear releasing tool used in pullingsubsurface devices which haveinternal fishing necks. From sizes upthrough 3 1/2”, the “PRS” Pulling Toolcan be configured to shear up ordown depending on the pullingoperations, and for sizes larger than3 1/2”, it can only release shearingdown.

SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS"2"2"2"2"2 "2/12 "2/12 "2/12 "2/12 "2/12 "4"4"4"4"4 "2/15,5 "2/15,5 "2/15,5 "2/15,5 "2/15,5

.D.OkcenhsiF "573.1 "573.1 "313.2 "313.2noitcennoCniP 01-"61/51 01-"61/51 01-"61/11 01-"61/91

.D.O.xaM "318.1 "318.1 "005.3 "083.4noitcennoCmottoB 31-"2/1 31-"2/1 epiPeniL"1 01-"61/91

niPraehS "23/121x"61/5 "23/121x"61/5 "46/913x"8/3 "46/743x"8/3segagnEkcenhsiF "005.1 "576.1 "005.2 "000.3

htgneLpUedaM "526.02 "526.02 "000.82 "005.72


“PRS-2” PULLING TOOLASSEMBLY 2” 2 1/2”

Part Number 40PRS200 40PRS250Unit Price 1180.00 1180.00


114.00 114.00

Inner Mandrel 40B01367 40B01367227.00 227.00

Compression Core Spring 90B01359 90B0135962.00 62.00

Spring Housing 40B01370 40B01370128.00 128.00

Spring Sleeve 40B01357 40B0135732.00 32.00

Shear Pin Sleeve 40B01369 40B0136927.00 27.00

Collet Housing 40B01368 40B01368128.00 128.00

Collet Retainer Spring 90B01358 90B0135857.00 57.00

Collet 40B01371 40B01360293.00 293.00

Collet Retainer 40B01358 40B0135898.00 98.00

Collet Core 40B01366 40B01366170.00 170.00

I-26

“PRS-2” PULLING TOOLASSEMBLY 4” 5”, 5 1/2”

Part Number 40PRS400 40PRS500Unit Price 3950.00 5740.00


364.00 526.00

Ratchet Housing 40B01425 40B01405387.00 563.00

Ratchet Sleeve 40B01420 40B01400590.00 857.00

Shear Pin Sleeve 40B01422 40B01402129.00 140.00

Spring Housing 40B01424 40B01404624.00 910.00

Spring 90B01365 90B01366170.00 189.00

Collet Housing 40B01428 40B01408536.00 770.00

Inner Mandrel 40B01429 40B01409717.00 1048.00

Collet 40B01427 40B01407899.00 1312.00

Collet Core 40B01426 40B01406238.00 345.00




moc.tni-sloot.www




I-28

“R” SERIES PULLING TOOLThe “R” Series Pulling Tool is a shearup releasing tool used in pullingsubsurface devices which haveexternal fishing necks. Toaccommodate the many differenttypes of devices, the core on the “R”Series Pulling Tool is made in variouslengths and can be changed in thefield.

SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS"61/31 "61/31 "61/31 "61/31 "61/31 "4/11 "4/11 "4/11 "4/11 "4/11 "2/11 "2/11 "2/11 "2/11 "2/11 "2"2"2"2"2 "2/12 "2/12 "2/12 "2/12 "2/12 "3"3"3"3"3 "4"4"4"4"4

.D.OkcenhsiF "578.0 "000.1 "881.1 "573.1 "573.1 "313.2 "313.2noitcennoCniP 11-"8/5 11-"8/5 01-"61/51 01-"61/51 01-"61/51 01-"61/11 01-"61/11

.D.O.xaM "081.1 "512.1 "524.1 "567.1 "071.2 "247.2 "566.3noitcennoCmottoB 41-"61/7 61-"8/3 61-"8/3 31-"2/1 31-"2/1 11-"8/5 21-"4/11

niPraehS "46/36x"61/3 "1x"61/3 "61/31x"4/1 "23/511x"61/5 "46/351x"61/5 "46/522x"8/3 "46/723x"8/3segagnEkcenhsiF "578.0 "000.1 "881.1 "573.1 "057.1 "313.2 "521.3

hcaeRBRBRBRBRBR "692.1 "812.1 "562.1 "912.1 "302.1 "792.1 "094.1JRJRJRJRJR ****** "521.2 "745.2 "745.2 "745.2 "906.2 "027.2SRSRSRSRSR ****** "348.1 "797.1 "489.1 "489.1 "091.2 "042.2

htgneLpUedaM "901.21 "573.21 "005.11 "869.21 "521.31 "000.51 "578.61wercSteS "4/1x02-"4/1 "4/1x02-"4/1 "61/5x81-"61/5 "4/1x41-"61/7 "8/3x61-"8/3 "8/3x41-"61/7 "2/1x31-"2/1


“RB”/ “RJ”/ “RS” PULLING TOOLASSEMBLY 1 3/16” 1 1/4” 1 1/2” 2”

Part Number (RB) 40RB1119 40RB1125 40RB1150 40RB1200Part Number (RJ) ******** 40RJ1125 40RJ1150 40RJ1200Part Number (RS) ******** 40RS1125 40RS1150 40RS1200Unit Price 860.00 860.00 860.00 860.00

With Inconel Springs ******** ******** 40**1150-INC 40**1200-INCUnit Price 890.00 955.00

COMPONENTSFishneck 40A01206 40B00500 40B00508 40A00001

130.00 130.00 130.00 131.00

Core 144.00 144.00 144.00 144.00

For “RB” 40A01209 40B00681 40A00150 40B00522For “RJ” ******** 40B00503 40B00149 40B00516For “RS” ******** 40B00682 40A00148 40B00525

Dog (3) 40A01213 (3) 40B00501 (3) 40B00157 (3) 40C00158105.00 ea. 78.00 ea. 78.00 ea. 78.00 ea.

Skirt 40A01208 40B00505 40B00344 40B00016334.00 334.00 334.00 257.00

Dog Washer 40A01214 40A00507 40A00514 40A0051826.00 25.00 25.00 26.00

Shear Pin Cover 40A01210 40A00506 40A00513 40A00511101.00 101.00 101.00 78.00

Spring Sleeve ******** ******** ******** 40A0051274.00

Dog Spring 90A00506 90A00502 90A00509 90A0051530.00 33.00 34.00 30.00

Core Spring 90A00507 90A00504 90A00511 90A0051755.00 43.00 30.00 34.00

INCONEL SPRINGS (OPTIONAL)Dog Spring ******** ******** 90N01247 90N01249

44.00 50.00

Core Spring ******** ******** 90N00247 90N0024844.00 101.00

**Insert desired pulling tool type - RB, RJ, or RS

I-30

“RB”/ “RJ”/ “RS” PULLING TOOLASSEMBLY 2 1/2” 3” 4”

Part Number (RB) 40RB1250 40RB1300 40RB1400Part Number (RJ) 40RJ1250 40RJ1300 40RJ1400Part Number (RS) 40RS1250 40RS1300 40RS1400Unit Price 960.00 1375.00 2570.00

With Inconel Springs 40**1250-INC 40**1300-INC 40**1400-INCUnit Price 1070.00 1415.00 2860.00


130.00 230.00 306.00

Core 144.00 256.00 432.00

For “RB” 40B00657 40B00541 40B00545For “RJ” 40B00660 40B00537 40B00547For “RS” 40B00659 40B00748 40B00549

Dog (3) 40C00156 (3) 40C00159 (4) 40C0067390.00 ea. 109.00 ea. 172.00 ea.

Skirt 40C00488 40B00207 40C00672290.00 432.00 1185.00

Dog Washer 40A00667 40A00670 40A0067626.00 33.00 63.00

Shear Pin Cover 40A00666 40A00671 40A0067778.00 89.00 136.00

Spring Sleeve 40A00665 ******** ********78.00

Dog Spring 90A01010 90N01253 90N0125729.00 97.00 91.00

Core Spring 90A01149 90A00538 90A0054643.00 78.00 132.00


66.00 97.00 91.00

Core Spring 90N00249 90N00253 90N00257115.00 113.00 424.00

**Insert desired pulling tool type - RB, RJ, or RS




moc.tni-sloot.www




I-32

“S” SERIES PULLING TOOLThe “S” Series Pulling Tool is a sheardown releasing tool used in pullingsub surface devices which haveexternal fishing necks. Toaccommodate the many differenttypes of devices, the core on the “S”Series Pulling Tool is made in variouslengths and can be changed in thefield.

SS/BS-SNOITACIFICEPS SS/BS-SNOITACIFICEPS SS/BS-SNOITACIFICEPS SS/BS-SNOITACIFICEPS SS/BS-SNOITACIFICEPS"4/11 "4/11 "4/11 "4/11 "4/11 "2/11 "2/11 "2/11 "2/11 "2/11 "2"2"2"2"2 "2/12 "2/12 "2/12 "2/12 "2/12 "3"3"3"3"3 "4"4"4"4"4

.D.OkcenhsiF "000.1 "881.1 "573.1 "573.1 "313.2 "313.2

noitcennoCniP 11-"8/5 01-"61/51 01-"61/51 01-"61/51 01-"61/11 01-"61/11

.D.O.xaM "912.1 "814.1 "567.1 "571.2 "047.2 "076.3

noitcennoCmottoB 61-"8/3 61-"8/3 31-"2/1 31-"2/1 11-"8/5 21-"4/11

niPraehS "23/31x"61/3 "46/711x"61/3 "46/931x"4/1 "46/361x"4/1 "8/12x"61/5 "8/52x"8/3

segagnEkcenhsiF "000.1 "881.1 "573.1 "057.1 "313.2 "521.3

hcaeRBSBSBSBSBS "082.1 "792.1 "912.1 "182.1 "005.1 "005.1

SSSSSSSSSS ****** "087.1 "130.2 "000.2 "012.2 "012.2

htgneLpUedaM "057.31 "964.21 "839.41 "823.51 "313.51 "000.71

MS-SNOITACIFICEPS MS-SNOITACIFICEPS MS-SNOITACIFICEPS MS-SNOITACIFICEPS MS-SNOITACIFICEPS"61/31 "61/31 "61/31 "61/31 "61/31 "2/11 "2/11 "2/11 "2/11 "2/11 "2"2"2"2"2

.D.OkcenhsiF "881.1 "573.1 "573.1

noitcennoCniP 01-"61/51 01-"61/51 01-"61/51

.D.O.xaM "881.1 "573.1 "567.1

noitcennoCmottoB 61-"8/3 61-"8/3 31-"2/1

niPraehS "23/11x"61/3 "23/31x"61/3 "46/931x"61/5

segagnEkcenhsiF "578.0 "781.1 "573.1

hcaeR "086.1 "875.1 "046.1

htgneLpUedaM "000.31 "958.21 "057.41


“SB”/ “SS” PULLING TOOLASSEMBLY 1 1/4” 1 1/2” 2”

Part Number (SB) 40SB1125 40SB1150 40SB1200Part Number (SS) 40SS1125 40SS1150 40SS1200Unit Price 1035.00 1035.00 860.00

With Inconel Springs ******* 40**1150-INC 40**1200-INCUnit Price ******* 1075.00 900.00


157.00 157.00 175.00

Core 144.00 144.00 144.00

For “SB” 40B00352 40B00628 40B00576For “SS” ****** 40B00629 40B00738

Dog (3) 40B00501 (3) 40B00157 (3) 40C0015878.00 ea. 78.00 ea. 78.00 ea.

Skirt 40B00353 40B00585 40B00741308.00 308.00 290.00

Dog Washer 40A00507 40A00514 40A0051825.00 25.00 26.00

Core Nut 40B00350 40A00702 40A0070543.00 43.00 44.00

Shear Pin Cover 40B00354 40A00701 40A0064293.00 93.00 89.00

Core Spring 90A00503 90A01503 90A0080436.00 29.00 30.00

Dog Spring 90A00502 90A00509 90A0051533.00 34.00 30.00

INCONEL SPRINGS (OPTIONAL)Core Spring ******** 90N00231 90N00232

50.00 50.00

Dog Spring ******** 90N01247 90N0124944.00 50.00

**Insert desired pulling tool type, SB or SS

I-34

“SB”/ “SS” PULLING TOOLASSEMBLY 2 1/2” 3” 4”

Part Number (SB) 40SB1250 40SB1300 40SB1400Part Number (SS) 40SS1250 40SS1300 40SS1400Unit Price 960.00 1375.00 2570.00

With Inconel Springs 40**1250-INC 40**1300-INC 40**1400-INCUnit Price 1020.00 1375.00 2570.00


130.00 230.00 230.00

Core 144.00 197.00 432.00

For “SB” 40B00744 40B00749 40B00692For “SS” 40B00742 40B00750 40B00693

Dog (3) 40C00156 (3) 40C00159 (4) 40C0067390.00 ea. 109.00 ea. 172.00 ea.

Skirt 40B00317 40B00004 40C00674332.00 567.00 996.00

Dog Washer 40A00667 40A00670 40A0067626.00 33.00 63.00

Core Nut 40A00746 40A00750 40A0075045.00 50.00 50.00


Core Spring 90A00844 90A01141 90A0114137.00 86.00 86.00

Dog Spring 90A01010 90N01253 90N0125729.00 97.00 91.00

INCONEL SPRINGS (OPTIONAL)Core Spring 90N00233 90N00237 90N00237

59.00 88.00 88.00

Dog Spring 90N01250 90N01253 90N0125766.00 97.00 91.00

** Insert desired pulling tool type, SB or SS


“SM” PULLING TOOLASSEMBLY 1 3/16” 1 1/2” 2”

Part Number 40SM0188 40SM0150 40SM0200Unit Price 1150.00 1150.00 1150.00

With Inconel Springs ******** ******** 40SM0200-INCUnit Price 1225.00

COMPONENTSFishneck 40A01205 40A01222 40B00740

175.00 175.00 175.00

Core 40A01212 40A01212 40A01230197.00 197.00 197.00

Dog (3) 40A01213 (3) 40B00502 (3) 40C00158105.00 ea. 106.00 ea. 78.00 ea.

Skirt 40A01203 40A01220 40A01229348.00 348.00 348.00

Dog Washer 40A01214 40A01214 40A0051826.00 26.00 26.00


Core Nut 40A01211 40A01211 40A0070553.00 53.00 44.00

Core Spring 90A01500 90A01500 90A0080429.00 29.00 30.00

Dog Spring 90A00506 90A00506 90A0051530.00 30.00 30.00

INCONEL SPRINGS (OPTIONAL )Core Spring ******** ******** 90N00232

50.00

Dog Spring ******** ******** 90N0124950.00

I-36

“SSJ” DOUBLE-SHEAR PULL TOOLThe “SSJ” Double-Shear Pulling Toolis used when the wireline operatorwants to be able to release the fishby jarring down on either the core orthe skirt of the pulling tool.



.D.O.xaM "567.1 "571.2 "047.2noitcennoCmottoB 31-"2/1 31-"2/1 11-"8/5

htgneLpUedaM "395.81 "052.91 "656.02segagnEkcenhsiF "573.1 "057.1 "313.2

hcaeR "005.2 "526.2 "307.2wercSteS "4/1x02-"4/1 "4/1x02-"4/1 "8/3x02-"4/1

)poT(niPraehS "23/911x"4/1 "61/511x"4/1 "46/332x"61/5


“SSJ” DOUBLE-SHEAR PULL TOOLASSEMBLY 2” 2 1/2” 3”

Part Number 40SSJ200 40SSJ250 40SSJ300Unit Price 2240.00 2960.00 3585.00

COMPONENTSTop Sub Adapter 40SSJ201 40SSJ251 40SSJ301

1480.00 2055.00 2570.00

Adapter Fishneck 40A00432 40A00152 40A00026117.00 124.00 190.00

Adapter Core 40C01352 40C01376 40C01366442.00 584.00 701.00

Adapter Shear Pin Cover 40C01353 40C01377 40C01365104.00 113.00 163.00

Shear Body 40C01354 40C01378 40C01369756.00 630.00 756.00

Lug Segment (2) 40C01350 (2) 40C01379 (2) 40C0136786.00 ea. 113.00 ea. 136.00 ea.

Adapter Spring 90C00200 90C00201 90C0020260.00 69.00 77.00

Lug Retainer 40C01351 40C01381 40C01368244.00 320.00 475.00

Skirt 40B00741 40B00317 40B00004290.00 332.00 567.00

Core 40B00577 40B00745 40B00751197.00 197.00 267.00

Dog (3) 40C00158 (3) 40C00156 (3) 40C0015978.00 ea. 90.00 ea. 109.00 ea.

Core Spring 90A00804 90A00844 90A0114130.00 37.00 86.00

Dog Spring 90A00515 90A01010 90A0114830.00 29.00 70.00

Dog Washer 40A00518 40A00667 40A0067026.00 26.00 33.00

Core Nut 40A00705 40A00746 40A0075044.00 45.00 50.00


I-38

REPINNING TOOL

RELEASING TOOL

NON-RELEASING TOOLS 2-PRONG 3-PRONG


REPINNING TOOLSIZE 2”-3” 4”Part Number 40PIN000 40PIN002Unit Price 220.00 305.00

3-PRONG NON-RELEASING TOOLSIZE 1 3/4” 2” 2 1/2”Part Number 40NR1175 40NR1200 40NR1250Unit Price 465.00 465.00 465.00

Will Pull Fishneck Size 1 3/16” 1 3/8” 1 3/4”

2-PRONG NON-RELEASING TOOLSIZE 1 3/4” 2” 2 1/2”Part Number 40NR0175 40NR0200 40NR0250Unit Price 385.00 385.00 465.00

Will Pull Fishneck Size 1 3/16” 1 3/8” 1 3/4”

RELEASING TOOLSIZE 1 1/2”-3” 4”Part Number 40REL200 40REL400Unit Price 245.00 430.00

I-40

ALLIGATOR GRAB


.D.OmumixaM "348.1 "003.2noitcennoCniP 01-"61/51 01-"61/51

.D.OkcenhsiF "573.1 "573.1htgneLllarevO "578.12 "526.92

The Alligator Grab is used to secureand retrieve small or unusuallyshaped objects. The tool must beretrieved after each attempt to bereset.


ALLIGATOR GRABASSEMBLY 2” 2 1/2”

Part Number 40AG0200 40AG0250Unit Price 5950.00 6430.00

COMPONENTSFishneck 40AG0201 40AG0251

660.00 706.00

Mandrel 40AG0202 40AG02521225.00 1318.00

Housing 40AG0203 40AG02531432.00 1544.00

Nut 40AG0204 40AG0254287.00 307.00

Jaws (2) 40AG0205 (2) 40AG0255866.00 ea. 932.00 ea.

Pin 40AG0206 40AG0256234.00 247.00

Slide Pin 40AG0207 40AG025788.00 94.00

Spring Pin 40AG0208 40AG025890.00 97.00

Large Spring 90AG0200 90B01690105.00 116.00

Key Spring 90B01067 90B0106732.00 32.00

I-42



moc.tni-sloot.www




Prices effective June 1, 2012 1-800-338-0308 J-1

J

RUNNING/PULLING PRONGS

J-2

PRONGS

TIC running and equalizing prongs are commonly screwed into running andpulling tools to perform functions necessary in manipulating subsurfacedevices.

SNOITACIFICEPS"2"2"2"2"2 "2/12 "2/12 "2/12 "2/12 "2/12 "3"3"3"3"3

gnilluP gnilluP gnilluP gnilluP gnilluP gninnuR gninnuR gninnuR gninnuR gninnuR gnilluP gnilluP gnilluP gnilluP gnilluP gninnuR gninnuR gninnuR gninnuR gninnuR gnilluP gnilluP gnilluP gnilluP gnilluP gninnuR gninnuR gninnuR gninnuR gninnuRnoitcennoCdaerhT 31-"2/1 31-"2/1 11-"8/5 11-"8/5 11-"8/5 01-"4/3

.D.O "365.0 "049.0 "049.0 "032.1 "063.1 "526.1htgneLllarevO "000.24 "008.2 "000.93 "005.3 "008.25 "003.4

SNOITACIFICEPS"2"2"2"2"2 "2/12 "2/12 "2/12 "2/12 "2/12 "3"3"3"3"3




“DK” TYPE PULLING RUNNING

2” 49DK3200 49DK2200130.00 106.00

2 1/2” 49DK3250 49DK2250140.00 128.00

3” 49DK3300 49DK2300179.00 130.00

PRONGS

“DK-XL” TYPE PULLING RUNNING

2” 49DK4200 49DK1200149.00 157.00

2 1/2” 49DK4250 49DK1250149.00 169.00

3” 49DK4300 49DK1300164.00 187.00

J-4

PRONGS


SNOITACIFICEPS"2"2"2"2"2 "2/12 "2/12 "2/12 "2/12 "2/12 "3"3"3"3"3



SNOITACIFICEPS"2"2"2"2"2 "2/12 "2/12 "2/12 "2/12 "2/12 "3"3"3"3"3




“DX” TYPE PULLING RUNNING

2” 49DX1200 49DX2200117.00 79.00

2 1/2” 49DX1250 49DX2250126.00 97.00

3” 49DX1300 49DX2300157.00 126.00

PRONGS

“HX” TYPE PULLING RUNNING

2” 49HX1200 49HX220097.00 79.00

2 1/2” 49HX1250 49HX2250126.00 97.00

3” 49HX1300 49HX2300157.00 105.00

J-6

PRONGS


SNOITACIFICEPS"017.1 "017.1 "017.1 "017.1 "017.1 "521.2-"187.1 "521.2-"187.1 "521.2-"187.1 "521.2-"187.1 "521.2-"187.1 "313.2/"881.2 "313.2/"881.2 "313.2/"881.2 "313.2/"881.2 "313.2/"881.2 "265.2 "265.2 "265.2 "265.2 "265.2 "886.3 "886.3 "886.3 "886.3 "886.3

gnilluP gnilluP gnilluP gnilluP gnilluP gninnuR gninnuR gninnuR gninnuR gninnuR gnilluP gnilluP gnilluP gnilluP gnilluP gninnuR gninnuR gninnuR gninnuR gninnuR gnilluP gnilluP gnilluP gnilluP gnilluP gninnuR gninnuR gninnuR gninnuR gninnuR gnilluP gnilluP gnilluP gnilluP gnilluP gninnuR gninnuR gninnuR gninnuR gninnuR gnilluP gnilluP gnilluP gnilluP gnilluP gninnuR gninnuR gninnuR gninnuR gninnuR

noitcennoCdaerhT 31-"2/1 61-"8/3 31-"2/1 31-"2/1 11-"8/5 11-"8/5 11-"8/5 11-"8/5 21-"8/12 21-"8/71

.D.O "517.0 "217.0 "078.0 "568.0 "390.1 "901.1 "003.1 "043.1 "073.2 "953.2

htgneLllarevO "834.21 "448.4 "526.21 "522.5 "839.31 "057.5 "318.21 "182.5 "578.31 "526.6

SNOITACIFICEPS.1.1.1.1.1 005 005 005 005 005 """"" "526.1 "526.1 "526.1 "526.1 "526.1 578.1 578.1 578.1 578.1 578.1 """"" 313.2 313.2 313.2 313.2 313.2 """""gnilluP gnilluP gnilluP gnilluP gnilluP gninnuR gninnuR gninnuR gninnuR gninnuR gnilluP gnilluP gnilluP gnilluP gnilluP gninnuR gninnuR gninnuR gninnuR gninnuR gnilluP gnilluP gnilluP gnilluP gnilluP gninnuR gninnuR gninnuR gninnuR gninnuR gnilluP gnilluP gnilluP gnilluP gnilluP gninnuR gninnuR gninnuR gninnuR gninnuR

noitcennoCdaerhT 31-"2/1 61-"8/3 31-"2/1 61-"8/3 31-"2/1 31-"2/1 11-"8/5 11-"8/5.D.O "517.0 "217.0 "517.0 "217.0 "969.0 "269.0 "003.1 "043.1

htgneLllarevO "834.21 "448.4 "834.21 "448.4 "052.21 "839.4 "318.21 "521.5

"318.2/"057.2 "318.2/"057.2 "318.2/"057.2 "318.2/"057.2 "318.2/"057.2 "313.3 "313.3 "313.3 "313.3 "313.3 "318.3 "318.3 "318.3 "318.3 "318.3gnilluP gnilluP gnilluP gnilluP gnilluP gninnuR gninnuR gninnuR gninnuR gninnuR gnilluP gnilluP gnilluP gnilluP gnilluP gninnuR gninnuR gninnuR gninnuR gninnuR gnilluP gnilluP gnilluP gnilluP gnilluP gninnuR gninnuR gninnuR gninnuR gninnuR

noitcennoCdaerhT 11-"8/5 01-"4/3 21-"8/31 21-"8/31 21-"8/12 21-"8/12.D.O "017.1 "017.1 "901.2 "001.2 "906.2 "906.2

htgneLllarevO "000.31 "005.5 "057.31 "193.6 "578.31 "005.6


PRONGS“TICR” TYPE PULLING RUNNING

1.710” 49TICXX1150 49TICXX2150204.00 230.00

1.781”/1.875”/2.125” 49TICR01213 49TICR02213277.00 238.00

2.188”/2.313” 49TICR01218 49TICR02218277.00 238.00

2.562” 49TICXX1250 49TICR02256230.00 238.00

3.688” 49TICR03680 49TICR03688322.00 322.00

“TICX” TYPE PULLING RUNNING

1.500” 49TICXX1150 49TICXX2150204.00 230.00

1.625” 49TICXX1150 49TICXX2150204.00 230.00

1.875” 49TICXX1200 49TICXX2200230.00 199.00

2.313” 49TICXX1250 49TICXX2250230.00 199.00

2.750”/2.813” 49TICXX1300 49TICXX2300277.00 238.00

3.313” 49TICXX1350 49TICXX2350442.00 442.00

3.813” 49TICXX1400 49TICXX2400442.00 442.00

J-8

PRONGS


SNOITACIFICEPSdaerhT daerhT daerhT daerhT daerhT .D.O .D.O .D.O .D.O .D.O htgneLllarevO htgneLllarevO htgneLllarevO htgneLllarevO htgneLllarevO

001-P 31-"2/1 "005.0 "573.12401-P 31-"2/1 "886.0 "526.12141-P 11-"8/5 "521.1 "573.32541-P 31-"2/1 "448.0 "005.22671-P 31-"2/1 "005.0 "881.52242-P 31-"2/1 "886.0 "005.22024-P 61-"8/3 "135.0 "000.81874-P 61-"8/3 "135.0 "057.71974-P 31-"2/1 "656.0 "573.12084-P 31-"2/1 "448.0 "057.12184-P 11-"8/5 "443.1 "573.22275-P 11-"8/5 "964.1 "000.32

SNOITACIFICEPS"2"2"2"2"2 "2/12 "2/12 "2/12 "2/12 "2/12

noitcennoCdaerhT 31-"2/1 11-"8/5.D.O "906.0 "816.0

htgneLllarevO "448.8 "318.8

SNOITACIFICEPSnoitcennoCniP 31-"2/1noitcennoCxoB 11-"8/5

.D.O "578.0htgneLllarevO "000.3


PRONGSDESCRIPTION PART NUMBER UNIT PRICE

P-100 49P10000 104.00

P-104 49P10400 131.00

P-141 49P14100 169.00

P-145 49P14500 131.00

P-176 49P17600 131.00

P-242 49P24200 131.00

P-420 49P42000 131.00

P-478 49P47800 131.00

P-479 49P47900 131.00

P-480 49P48000 131.00

P-481 49P48100 131.00

P-572 49P57200 169.00

PRONG CROSSOVER

Part Number 49PXOVERUnit Price 105.00

“DD” BRIDGE PLUG PRONG

2” 49DD1200 154.00

2 1/2” 49DD1250 169.00

J-10

BAKER STYLE EQUIPMENTThe “A” Probe is a wireline manipulated device that is used to close the dogs (orlocks) on a Baker Style Locking Mandrel in order to remove it from the well.

The “A” Shank is used to retain the down facing dogs on a Baker Style “S”,“TS”, “W”, and “Z” Lock, while used in conjunction with a “C-1” Running Tool.It can also serve as a crossover from the running tool to an “A” or “B” Prong.

The “A” Prong is used in conjunction with various running and pulling toolswhen setting and pulling Baker Style flow control devices. It is commonly usedin running and pulling operations.

SNOITACIFICEPS"2/11 "2/11 "2/11 "2/11 "2/11 "2"2"2"2"2 "2/12 "2/12 "2/12 "2/12 "2/12 "3"3"3"3"3

noitcennoCniP 61-"8/3 31-"2/1 31-"2/1 11-"8/5noitcennoCxoB 41-"61/7 31-"2/1 31-"2/1 11-"8/5

.D.O "427.0 "238.0 "731.1 "783.1htgneLllarevO "964.7 "360.9 "360.9 "656.01

kceN "839.0 "881.1 "005.1 "360.2

SNOITACIFICEPS"2/11 "2/11 "2/11 "2/11 "2/11 "2"2"2"2"2 "2/12 "2/12 "2/12 "2/12 "2/12 "3"3"3"3"3

noitcennoCniP 11-"8/5 61-"4/3 41-"1 41-"1noitcennoCxoB 41-"61/7 31-"2/1 31-"2/1 11-"8/5

.D.O "896.0 "238.0 "161.1 "114.1htgneLllarevO "057.4 "000.5 "886.4 "313.5

SNOITACIFICEPS"2"2"2"2"2 "2/12 "2/12 "2/12 "2/12 "2/12 "3"3"3"3"3

noitcennoCniP 31-"2/1 31-"2/1 11-"8/5.D.O "005.0 "005.0 "526.0

htgneLllarevO ****redrOremotsuCreP****

Prices effective June 1, 2012 1-800-338-0308 J-1 1

BAKER STYLE EQUIPMENT“A” PROBE*

ASSEMBLY 1 1/2” 2” 2 1/2” 3”Part Number 14P00150 14P00200 14P00250 14P00300Unit Price 515.00 530.00 585.00 645.00

COMPONENTSCore 14A00195 14A00200 14A00200 14B01205

107.00 127.00 127.00 141.00

Washer 14A00197 14B01203 14A00202 14B01206157.00 157.00 180.00 209.00

Body 14A00196 14B01202 14A00201 14B01207333.00 333.00 370.00 414.00

* Also available: “AC” Probe (same price)

“A” PRONGSIZE 2” 2 1/2” 3”Part Number 14P05200 14P05250 14P05300Unit Price 177.00 177.00 216.00

“A” SHANKSIZE 1 1/2” 2” 2 1/2” 3”Part Number 14SH0150 14SH0200 14SH0250 14SH0300Unit Price 140.00 140.00 154.00 186.00

J-12

BAKER STYLE EQUIPMENTThe “B” Probe is a wireline manipulated device that is used to close the dogs(or locks) on a Baker top or bottom No Go Style lock mandrel in order toremove it from the well.

The “N-1” Probe is used in conjunction with a pulling tool to retrieve BakerStyle “N”, “G”, “L”, or “R” (collet style) Locks.

The “N-1” Shank is used with a “C-1” Running Tool to run and set the BakerStyle “N”, “G”, “L”, or “R” (collet style) Locks.

SNOITACIFICEPS"4/11 "4/11 "4/11 "4/11 "4/11 "2/11 "2/11 "2/11 "2/11 "2/11 "2"2"2"2"2 "2/12 "2/12 "2/12 "2/12 "2/12 "3"3"3"3"3

noitcennoCniP 61-"8/3 31-"2/1 31-"2/1 31-"2/1 11-"8/5noitcennoCxoB 02-"4/1 41-"61/7 31-"2/1 31-"2/1 11-"8/5

.D.O 6594. "896.0 "238.0 "731.1 "783.1htgneLllarevO "182.6 "182.6 "490.7 "912.7 "057.7

kceN "8886. "839.0 "360.1 "005.1 "000.2

SNOITACIFICEPS"2"2"2"2"2 "2/12 "2/12 "2/12 "2/12 "2/12

noitcennoCniP 31-"2/1 31-"2/1noitcennoCxoB 31-"2/1 31-"2/1

.D.O "839.0 "532.1htgneLllarevO "005.11 "881.11

kceN enoN "656.1

SNOITACIFICEPS"2"2"2"2"2 "2/12 "2/12 "2/12 "2/12 "2/12

noitcennoCniP 61-"4/3 41-"1noitcennoCxoB 31-"2/1 31-"2/1

.D.O "839.0 "532.1htgneLllarevO "578.01 "318.01

Prices effective June 1, 2012 1-800-338-0308 J-1 3

BAKER STYLE EQUIPMENT

“B” PROBESIZE 1 1/4” 1 1/2” 2”Part Number 14P01125 14P01150 14P01200Unit Price 209.00 209.00 209.00

SIZE 2 1/2” 3”Part Number 14P01250 14P01300Unit Price 223.00 246.00

“N-1” SHANKSIZE 2” 2 1/2”Part Number 14SH2200 14SH2250Unit Price 209.00 223.00

“N-1” PROBESIZE 2” 2 1/2”Part Number 14P02200 14P02250Unit Price 250.00 268.00

J-14

BAKER STYLE EQUIPMENT

“C” PRONGSIZE 2”, 2 1/2”Part Number 14P03200Unit Price 214.00

The “C” Prong is used in conjunction with various running and pulling toolswhen setting and pulling Baker Style flow control devices. It is commonly usedwhen equalizing “R” Blanking Plugs.

SNOITACIFICEPS"2/12/"2 "2/12/"2 "2/12/"2 "2/12/"2 "2/12/"2

noitcennoCniP 31-"2/1.D.O "2/1

htgneLllarevO "005.53/"000.33

Prices effective June 1, 2012 1-800-338-0308 K-1

K

TESTING EQUIPMENT

K-2

“A” CIRCULATING PLUGThe Type “A” Circulating Plug is aremovable check valve that can beinstalled below a perforation. It mayalso be used to test the tubing fromabove.

SNOITACIFICEPS"2/11 "2/11 "2/11 "2/11 "2/11 "2"2"2"2"2 "2/12 "2/12 "2/12 "2/12 "2/12 "3"3"3"3"3

.D.OkcenhsiF "881.1 "573.1 "573.1 "313.2htgneLllarevO "057.21 "521.41 "526.51 "365.71

niPraehS "8/5x"8/1 "8/31x"8/1 "2/11x"8/1 "8/51x"61/3llaBleetSsselniatS "4/3 "8/7 "8/7 "8/51

aerAwolF "531.0 "951.0 "951.0 "082.0daerhTmottoB 01-"61/51 01-"61/51 01-"61/51 enoN


“A” CIRCULATING PLUGASSEMBLY 1 1/2” 2” 2 1/2” 3”

Part Number 15CP1150 15CP1200 15CP1250 15CP1300Unit Price 880.00 880.00 880.00 1035.00


281.00 281.00 281.00 300.00

Collet 15B01550 15B01554 15B01558 15B01566227.00 227.00 227.00 264.00

Ball Seat 15B01551 15B01555 15B01559 15B01563227.00 227.00 227.00 264.00

Valve Cup Retainer 15B01552 15B01556 15B01560 15B01565179.00 179.00 175.00 208.00

Stainless Steel Ball 95SS0069 95SS0088 95SS0100 95SS016310.00 16.00 17.00 59.00

Choke Cup 81CC0150 81CC0179 81CC0313 81CC028719.00 19.00 24.00 32.00

O-Ring (2) #213 (2) #216 (2) #222 (2) #225.85 ea. .85 ea. 1.00 ea. 1.10 ea.

K-4

“W” CIRCULATING PLUGThe Type “W” Circulating Plug is aremovable check valve that can beinstalled below a perforation. It mayalso be used to test the tubing fromabove.

SNOITACIFICEPS"2"2"2"2"2 "2/12 "2/12 "2/12 "2/12 "2/12

.D.OkcenhsiF "573.1 "573.1htgneLllarevO "839.81 "005.91

niPraehS "23/721x"8/1 "23/52x"8/1daerhTmottoB 01-"61/51 01-"61/51

.D.OgninnuR "958.1 "561.2looTgninnuR 00210H14 00210H14looTgnilluP 0021SR04 0021SR04

niPlloR "8/3x"8/1 "2/1x"8/1niPlloR "61/31x"8/1 "61/31x"8/1


“W” CIRCULATING PLUGASSEMBLY 2” 2 1/2”

Part Number 15W01200 15W01250Unit Price 1250.00 1360.00


117.00 117.00

Cage 15B01232 15B01237111.00 119.00

Valve 15B01242 15B01236107.00 153.00

Element Expander 15B01233 15B01238203.00 227.00

Element 18DE0200 18DE0250333.00 341.00

Sleeve 10B01333 10B01334317.00 350.00

Inner Sleeve 10B01330 10B01337127.00 145.00

Main Mandrel 15B01234 15B01239245.00 291.00

Lower Sub 15B01241 15B01240203.00 311.00

O-Ring #120 #218.85 1.00

K-6

“TIC” PACKOFF(CONFIGURED AS CIRCULATING PLUG)

SIZE 2” 2 1/2” 3”TUBING WEIGHTS 4.7# 6.5# 9.2#

Unit Price 1705.00 Net 1780.00 Net 2100.00 Net

The Type “TIC” Circulating Plug is aremovable check valve that can beinstalled below a perforation. It mayalso be used to test the tubing fromabove. The Type “TIC” CirculatingPlug can be manufactured for manydifferent size tubings and weights.




moc.tni-sloot.www




K-8

“A” EQUALIZING STANDING VALVEThe “A” Series Equalizing StandingValves are designed to hold pressurefrom above for use in intermittent gaslift wells to contain fluid in the tubingduring an injection cycle.

SNOITACIFICEPS"4/11 "4/11 "4/11 "4/11 "4/11 "2/11 "2/11 "2/11 "2/11 "2/11 "2"2"2"2"2 "2/12 "2/12 "2/12 "2/12 "2/12

.D.OkcenhsiF "578.0 "578.0 "573.1 "573.1htgneLllarevO "005.01 "057.01 "526.21 "578.21

niPraehS "8/7x"61/3 "8/7x"61/3 "8/31x"61/3 "8/31x"61/3llaBleetSsselniatS "4/3 "4/3 "4/11 "2/11

eroBelppiNtaeS "52.1 "34.1 "18.1 "52.2.D.OoGoN "313.1 "084.1 "068.1 "592.2

aerAwolF "531.0 "170.0 "332.0 "282.0looTgninnuR 521CDJ04 521CDJ04 002SDJ04 002SDJ04looTgnilluP 521CDJ04 521CDJ04 002SDJ04 002SDJ04


“A” EQUALIZING STANDING VALVEASSEMBLY 1 1/4” 1 1/2” 2” 2 1/2”

Part Number 14E00125 14E00150 14E00200 14E00250Unit Price 625.00 625.00 690.00 985.00

COMPONENTSRetainer Head 14B01542 14B01542 14B00116 14B00116

71.00 71.00 71.00 71.00

Pull Skirt 14B01546 14B01546 14B00115 14B01541282.00 282.00 282.00 448.00

Ball Housing 14B01544 14B01544 14B00119 14B01540157.00 157.00 157.00 228.00

Stainless Steel Ball 95SS0075 95SS0075 95SS0125 95SS015011.00 11.00 26.00 45.00

Packing Barrel 14B01543 14B01547 14B00118 14B01539157.00 157.00 157.00 157.00

Body ******** ******** 14B00117 14B01538197.00 228.00

Packing (3) 91A01080 (4) 91BKR143 (4) 91A01079 (4) 91A005843.98 net ea. 5.28 net ea. 6.13 net ea. 7.12 net ea.

Nose 14B01545 14B01548 ******** ********76.00 76.00

O-ring (2) #213 (2) #213 (2) #221 (2) #327.85 ea. .85 ea. 1.00 ea. 1.10 ea.

SEATING NIPPLESSIZE 2 3/8” 2 7/8”

Part Number 11N01238 11N01278Unit Price 347.00 376.00

The “A” Seating Nipple is a straightbore polished nipple, having nofacility for a lock mandrel, thus mostcommonly used with an equalizingstanding valve.

K-10

“N” / “Q” TEST TOOLSThe “N” / “Q” Test Tool is used topressure test the tubing above thenipple in which it is set. The tool isdesigned to hold pressure only fromabove, allowing a small amont of flowfrom beneath.

N-SNOITACIFICEPS"2"2"2"2"2 "2/12 "2/12 "2/12 "2/12 "2/12 "3"3"3"3"3

)kcenhsiF(.D.OtuN "573.1 "573.1 "313.2htgneLllarevO "182.01 "969.9 "000.11

.D.OoGoN "568.1 "003.2 "568.2daerhTmottoB 21-"8/11 41-"23/111 21-"8/71

looTgninnuR 00210H14 00210H14 00310H14looTgnilluP 0021BR04 0021BR04 0031BR04

niPlloR "61/31x"8/1 "61/31x"8/1 "2x"8/1

Q-SNOITACIFICEPS"3"3"3"3"3

)kcenhsiF(.D.OtuN "313.2htgneLllarevO "052.9

.D.OoGoN "027.2daerhTmottoB 21-"8/71

looTgninnuR 00310H14looTgnilluP 0031BR04

niPlloR "2x"8/1

Prices effective June 1, 2012 1-800-338-0308 K-1 1

“N” TEST TOOLASSEMBLY 2” 2 1/2” 3”

Part Number 14N01200 14N01250 14N01300Unit Price 645.00 710.00 870.00

COMPONENTSNut 14A00100 14A00100 14A00103

95.00 95.00 104.00

Drop 14A00098 14A00098 14A0009878.00 78.00 78.00

Cage 14A00099 14A00107 14B01172104.00 104.00 173.00

Packing Retainer 14A01058 14A01058 14A0105834.00 34.00 34.00

Seal Ring 14A00102 14A00102 14A0010210.00 10.00 10.00

Seal Insert 14A00101 14A00101 14A0010178.00 78.00 78.00

Packing Nut 14B01461 14B01462 14B0146349.00 62.00 70.00


Adapter 14A00096 14A00097 14A01463184.00 229.00 285.00

Male Adapter Ring 14A00094 14A00095 14A0146636.00 47.00 62.00

Back Up Ring 10A00405 10A00408 10A0043532.00 36.00 64.00

O-Ring #113 #113 #113.75 .75 .75

K-12

“Q” TEST TOOLASSEMBLY 3”

Part Number 14Q00300Unit Price 975.00

COMPONENTSNut 14A00103

104.00

Drop 14A0009878.00

Cage 14B01172173.00

Packing Retainer 14A0105834.00

Seal Ring 14A0010210.00

Seal Insert 14A0010178.00

Packing Nut 14B0146370.00

Vee Packing (4) 91V3020011.29 net ea.

Adapter 14B01171200.00

Male Adapter Ring 14A0146562.00

Back Up Ring 14A0146462.00

O-Ring #113.75




moc.tni-sloot.www




K-14

“S” / “T” TEST TOOLThe “S” / “T” Test Tool is used topressure test the tubing above theselective nipple in which it is set. Thetool is designed to hold pressure onlyfrom above, allowing a small amountof flow from beneath.

T-SNOITACIFICEPS"3"3"3"3"3

looTtseTQ)kcenhsiF(.D.OtuN "313.2

htgneLllarevO "052.9.D.OoGoN "027.2

daerhTmottoB 21-"8/71looTgninnuR 00310H14looTgnilluP 0031BR04

niPlloR "2x"8/1rotacoLT

)detcarteRsyeK(.D.O.xaM "576.2.D.ImuminiM "005.1

daerhTpoT 21-"8/71daerhTmottoB 21-"2

S-SNOITACIFICEPS"2"2"2"2"2 "2/12 "2/12 "2/12 "2/12 "2/12 "3"3"3"3"3

looTtseTN.D.OtuN

)kcenhsiF( "573.1 "573.1 "313.2

htgneLllarevO "182.01 "969.9 "000.11.D.OoGoN "568.1 "003.2 "568.2

daerhTmottoB 21-"8/11 41-"23/111 21-"8/71looTgninnuR 00210H14 00210H14 00310H14looTgnilluP 0021BR04 0021BR04 0031BR04

niPlloR "61/31x"8/1 "61/31x"8/1 "2x"8/1rotacoLS.D.O.xaM

)detcarteRsyeK( "218.1 "302.2 "067.2

.D.ImuminiM "46/54 "578. "005.1daerhTpoT 21-"8/11 41-"23/111 21-"8/71

daerhTmottoB 41-"61/31 21-"61/91 21-"2


“S” TEST TOOLASSEMBLY 2” 2 1/2” 3”

Part Number 14S0*200 14S0*250 14S0*300Unit Price 1375.00 1465.00 1905.00

COMPONENTS“N” Test Tool 14N01200 14N01250 14N01300

645.00 710.00 870.00

“S” Locator 10SL*200 10SL*250 10SL*300740.00 760.00 1045.00

“T” TEST TOOLASSEMBLY 3”

Part Number 14T0*300Unit Price 2225.00

COMPONENTS“Q” Test Tool 14Q00300

975.00

“T” Locator 10TL*2751260.00


K-16

“TICX” SELECTIVE TEST TOOLThe “TICX” Selective Test Tool isused to pressure test the tubingabove the nipple in which it is set.The locator assembly on this toolallows the operator the flexibility tolocate, land, and pressure test thetubing from any desired “TICX” StyleLanding Nipple within the tubingstring.

SNOITACIFICEPS"2"2"2"2"2 "2/12 "2/12 "2/12 "2/12 "2/12 "3"3"3"3"3

)kcenhsiF(.D.OtuN "573.1 "573.1 "057.1htgneLllarevO "604.22 "912.42 "489.52

daerhTmottoB enoN .P.L"1 .P.L"1dednapxEsyeK "491.2 "026.2 "91.3

.D.O "078.1 "503.2 "047.2looTgninnuR 002JSS04 002JSS04 052JSS04looTgnilluP 002JSS04 002JSS04 052JSS04

niPlloR "61/31x"8/1 "61/31x"8/1 "2x"8/1


“TICX” SELECTIVE TEST TOOLASSEMBLY 2”

Part Number 14TICX00200Unit Price 3995.00

COMPONENTSNut 14A00100 Packing Mandrel 14B00225

95.00 423.00

Drop 14A00098 Adapter Ring 14A0009478.00 36.00

Cage 14A00099 Packing (7) 91V31000104.00 4.46 net ea.

Packing Retainer 14A01058 Back Up Ring 10A0040534.00 32.00

Seal Ring 14A00102 Spring Housing 14B0022310.00 326.00

Seal Insert 14A00101 Core Spring (Inconel) 90N0022078.00 119.00

Body 14B00224 Dog Spring (Inconel) 90N01220669.00 49.00

Upper Key Retainer 14B00219 Dog Retainer 42B00264100.00 484.00

Key (2) 14B00199 Split Ring (2) 41A00644469.00 ea. 26.00 ea.

Lower Key Retainer 42A00194 Locator Dog (2) 41C0072640.00 97.00 ea.

Key Spring (2) 90A00917 Locator Mandrel 14B0022237.00 ea. 455.00

Nut 14B00221 O-Ring (Seal) #113178.00 .75

O-Ring (Mandrel) #213.85

K-18

“TICX” SELECTIVE TEST TOOLASSEMBLY 2 1/2”



95.00 479.00








Key (2) 14B00200 Split Ring (2) 41B00732575.00 ea. 36.00 ea.

Lower Key Retainer 14B00202 Locator Dog (2) 41A00863131.00 120.00 ea.


Nut 14B00195 O-Ring (Seal) #113198.00 .75



“TICX” SELECTIVE TEST TOOLASSEMBLY 3”



119.00 703.00








Key (2) 14B00135 Split Ring (2) 41B00735700.00 ea. 49.00 ea.

Lower Key Retainer 42B00823 Locator Dog (2) 41B0073662.00 216.00 ea.


Nut 14B00132 O-Ring (Seal) #113261.00 .75


K-20

“TICX” SELECTIVE TEST TOOL

The “TICX” Selective Test Tool (withBall Check) is used to pressure testthe tubing above the nipple in which itis set. The locator assembly on thistool allows the operator the flexibilityto locate, land and pressure test thetubing from any desired “TICX” StyleLanding Nipple within the tubingstring. If it becomes necessary toleave the test tool downhole, upwardjarring will shear two pins thatconnect the fishneck to the ballhousing. This will allow the tool stringto return to the surface. An insidefishneck on the ball housing of thetest tool will allow the test tool to beretrieved with a GS Pulling Tool.

(WITH BALL CHECK)

SNOITACIFICEPS"578.1 "578.1 "578.1 "578.1 "578.1 "313.2 "313.2 "313.2 "313.2 "313.2 "057.2 "057.2 "057.2 "057.2 "057.2 "318.2 "318.2 "318.2 "318.2 "318.2

.D.OkcenhsiF "573.1 "573.1 "057.1 "057.1noitcennoCniP 01-"61/51 01-"61/51 01-"61/11 01-"61/11htgneLpUekaM "906.03 "052.13 "093.23 "093.23

daerhTmottoB enoN .P.L"1 .P.L"1 .P.L"1dednapxEsyeK "491.2 "026.2 "091.3 "252.3

.D.O "078.1 "503.2 "047.2 "008.2sselniatS

llaBleetS "8/7 "4/11 "8/31 "8/31

)2(niPraehS "526.1x"4/1 "521.2x"61/5 "526.2x"61/5 "526.2x"61/5niPreniateR "578.1x"4/1 "573.2x"4/1 "578.2x"4/1 "578.2x"4/1

wercSteS "4/1x02-"4/1 "4/1x02-"4/1 "8/1x02-"4/1 "8/1x02-"4/1lanretnI

.D.IkcenhsiF "573.1 "218.1 "023.2 "023.2


“TICX” SELECTIVE TEST TOOL(WITH BALL CHECK)

ASSEMBLY 1.875”Part Number 14TICX01200Unit Price 4360.00

COMPONENTSFishneck 14A01500 Adapter Ring 14A00094

241.00 36.00

Ball Housing 14A01404 Packing (7) 91V31000367.00 4.46 net ea.

Ball 95SS0088 Back Up Ring 10A0040516.00 32.00

Ball Seat 14A01508 Spring Housing 14B00223204.00 326.00

O-Ring (3) #213 Core Spring (Inconel) 90N00220.85 ea. 119.00

Body 14A01512 Dog Spring (Inconel) 90N01220414.00 49.00


Key (2) 14B00199 Split Ring (2) 41A00644469.00 ea. 26.00 ea.

Lower Key Retainer 42A00194 Locator Dog (2) 41C0072640.00 97.00 ea.


Nut 14B00221178.00

Packing Mandrel 14B00225423.00

K-22




279.00 47.00


Ball 95SS0125 Back Up Ring 10A0040826.00 36.00



O-Ring #217 Dog Spring (Inconel) 90N01221.85 56.00

Body 14A01513 Dog Retainer 14B00203479.00 619.00

Upper Key Retainer 14B00201 Split Ring (2) 41B00732151.00 36.00 ea.

Key (2) 14B00200 Locator Dog (2) 41A00863575.00 ea. 120.00 ea.

Lower Key Retainer 14B00202 Locator Mandrel 14B00196131.00 523.00

Key Spring (2) 90A0091837.00 ea.

Nut 14B00195198.00






337.00 69.00


1 1/2” Ball 95SS0150 Back Up Ring 10A0042645.00 69.00






Key (2) 14B00135 Locator Dog (2) 41B00736700.00 ea. 216.00 ea.


Key Spring (2) 90A0091837.00 ea.

Nut 14B00132261.00


K-24




337.00 69.00


1 1/2” Ball 95SS0150 Back Up Ring 10A0043045.00 47.00






Key (2) 14A01516 Locator Dog (2) 14A01519700.00 ea. 216.00 ea.


Key Spring (2) 90A0091837.00 ea.

Nut 14B00132261.00

Packing Mandrel 14A01517703.00

Prices effective June 1, 2012 1-800-338-0308 L- 1

L

GAS LIFT EQUIPMENT

L- 2

“L” KICKOVER TOOLThe “L” Series Kickover Tool is usedin selectively locating 1” and 1 1/2”retrievable wireline devices in sidepocket mandrels.

SNOITACIFICEPS.D.OkcenhsiF "781.1

)detcarteRsmrA(.D.O.xaM "958.1htgneLpUekaM "000.03

niPleetS "052.1x"61/3daerhTniPpoT 01-"61/51

daerhTxoBmottoB 01-"61/51evlaV "2/11&"1

epyTlerdnaM ,GMBK,MBKGMM,MM


2”, 2 1/2” “L” KICKOVER TOOLASSEMBLY

Part Number 60L01200Unit Price 1705.00

COMPONENTSKnuckle Joint 60L05200

290.00

Mandrel 60B00080440.00

Sleeve 60B00970161.00

Barrel & Pin Retainer 60B00077509.00

Arm Assembly (2) 60L02200155.00 ea.

Spring Extension 60B00971103.00

Coil Spring 90A0059943.00

Locking Dog (2) 60B0018774.00 ea.

Spring Retainer 60A00973100.00

Arm Hinge Pin (2) 60A0164123.00 ea.

Slide Pin (2) 60A0164023.00 ea.

L- 4

“L2D” KICKOVER TOOLThe “L” Series Kickover Tool is usedin selectively locating 1” and 1 1/2”retrievable wireline devices in sidepocket mandrels.

SEZISLLA-SNOITACIFICEPS.D.OkcenhsiF "781.1

.D.O.xaM "057.1htgneLpUekaM "000.02

niPleetS "052.1x"61/3daerhTniPpoT 01-"61/51

daerhTxoBmottoB 01-"61/51evlaV "2/11&"1

epyTlerdnaM MBK


“L2D” KICKOVER TOOLASSEMBLY 2”, 2 1/2” 3”

Part Number 60L2D200 60L2D300Unit Price 1705.00 1760.00

COMPONENTSKnuckle Joint 60L05200 60L05200

290.00 290.00

Mandrel 60B00081 60B00081367.00 367.00

Sleeve 60B00970 60B00970161.00 161.00

Barrel & Pin Retainer 60B00078 60B00078509.00 509.00

Arm Assembly (2) 60L02200 (2) 60L02200155.00 ea. 155.00 ea.

Spring Extension 60B00972 60B00972103.00 103.00

Coil Spring 90A00599 90A0059943.00 43.00

Locking Dog (2) 60B00187 (2) 60B0018774.00 ea. 74.00 ea.

Spring Retainer 60A00972 60A00972100.00 100.00

Arm Spring ******** (2) 90A0060059.00 ea.

Arm Hinge Pin (2) 60A01641 (2) 60A0164123.00 ea. 23.00 ea.

Slide Pin (2) 60A01640 (2) 60A0164023.00 ea. 23.00 ea.

L- 6

“K” / “AK” KICKOVER TOOLThe “K” / “AK” Kickover Tools areused in selectively locating 1”retrievable wireline devices in sidepocket mandrels.

SEZISLLA-"K"-SNOITACIFICEPS.D.OkcenhsiF "573.1


)4(sniPlloR "573.1x"61/3daerhTniPpoT 01-"61/51

daerhTxoBmottoB 01-"61/51evlaV "1

epyTlerdnaM ,GMBK,MBKGMM*,MM*

recapS"260.4seriuqeR*

"KA"-SNOITACIFICEPS.D.OkcenhsiF "781.1


)4(sniPleetS "313.1x"61/3daerhTniPpoT 01-"61/51

daerhTxoBmottoB 01-"61/51evlaV "1

epyTlerdnaM AK,WUBK,UBK


“K” KICKOVER TOOLASSEMBLY 2”, 2 1/2” 3” 4-ARM

Part Number 60K00200 60K00300 60K00400Unit Price 1500.00 1500.00 1615.00

COMPONENTSKnuckle Joint 60K00002 60K00002 60K00002

425.00 425.00 425.00

Fishneck 60B00061 60B00061 60B0006172.00 72.00 72.00

Socket 60A00065 60A00065 60A0006572.00 72.00 72.00

Ball 60A00083 60A00083 60A0008339.00 39.00 39.00

Upper Bushing 60A00687 60A00687 60A0068791.00 91.00 91.00

Mandrel 60B00062 60B00062 60B00062311.00 311.00 311.00

Spring Protector Cap (2) 60B01125 (2) 60B01125 (2) 60B0112567.00 ea. 67.00 ea. 67.00 ea.

Ratchet Housing (2) 60B01123 (2) 60B01123 (2) 60B00064132.00 ea. 132.00 ea. 176.00 ea.

Lock Ratchet 60K00001 60K00001 60K0000199.00 99.00 99.00

Spring Attachment Sleeve (2) 60A00082 (2) 60A00082 (2) 60A00082117.00 ea. 117.00 ea. 117.00 ea.

Extension Spring 90A00914 90A00914 90A0091444.00 44.00 44.00

Centering Spring (3) 90A00564 (3) 90A00564 (4) 90A0056463.00 ea. 63.00 ea. 63.00 ea.

Slip Ratchet 60K00000 60K00000 60K0000099.00 99.00 99.00

Lower Bushing 60A00694 60A00694 60A0069491.00 91.00 91.00

L- 8

1 1/2” “AK” KICKOVER TOOLASSEMBLY

Part Number 60AK0150Unit Price 1770.00

COMPONENTSKnuckle Joint 60AK0001

425.00

Fishneck 60B00967173.00

Socket 60A00958123.00

Ball 60A00961180.00

Upper Bushing 60A00635111.00

Mandrel 60B00956377.00

Spring Protector Cap (2) 60A0095982.00 ea.

Ratchet Housing (2) 60B00957160.00 ea.

Lock Ratchet 60AK000290.00

Spring Attachment Sleeve (2) 60A00960141.00 ea.

Extension Spring 90A0091555.00

Centering Spring (3) 90A0056463.00 ea.

Slip Ratchet 60AK000090.00

Lower Bushing 60A00636111.00




moc.tni-sloot.www




L- 10

“OK-1” KICKOVER TOOLThe “OK-1” Kickover Tool is used toinstall and retrieve 1” devices inmandrels with an orienting sleeve.

SNOITACIFICEPS"2"2"2"2"2 "2/12 "2/12 "2/12 "2/12 "2/12


htgneLpUekaM "886.27 "886.27regniF-niPleetSregnulPesaeleR

"2/11x"4/1 "2/11x"4/1"2/11x"61/3 "2/11x"61/3

.pdAmrA-niPssarBretpadArewoL

"4/11x"61/3 "4/11x"61/3"4/11x"61/3 "4/11x"61/3

daerhTniPpoT 01-"61/51 01-"61/51evlaV "1 "1

epyTlerdnaM GBK,GMBK GBK,GMBK

"3"3"3"3"3 "4"4"4"4"4.D.OkcenhsiF "573.1 "573.1

.D.O.xaM "817.2 "017.3htgneLpUekaM "005.67 "005.67

regniF-niPleetSregnulPesaeleR

"4/11x"4/1 "4/11x"4/1"8/32x"61/3 "8/71x"61/3

.pdAmrA-niPssarBretpadArewoL

"4/11x"61/3 ********"4/11x"61/3 "4/11x"61/3

daerhTniPpoT 01-"61/51 01-"61/51evlaV "1 "1



“OK-1” KICKOVER TOOLASSEMBLY 2” 2 1/2” 3” 4”

Part Number 600K1200 600K1250 600K1300 600K1400Unit Price 4435.00 4660.00 5655.00 6100.00


217.00 217.00 293.00 269.00

Finger Housing 60B00977 60B00977 60B01648 60B01701482.00 482.00 585.00 535.00

Finger Cage 60B00975 60B01647 60B01646 60B017041291.00 1291.00 1714.00 2196.00

Leaf Spring (2) 90B01068 (2) 90B01068 (2) 90B01068 (2) 90B0106879.00 ea. 79.00 ea. 79.00 ea. 79.00 ea.

Release Plunger 60B00976 60B00976 60B01355 60B00976304.00 304.00 420.00 304.00

8/32” Screw (2) 60B00665 (2) 60B00665 (4) 60B00665 (2) 60B006653.00 ea. 3.00 ea. 3.00 ea. 3.00 ea.

Release Spring ******** ******** 90B01070 (2) 90B01071110.00 109.00 ea.

Lock Ring 60B00978 60B00978 60B01641 60B00978121.00 121.00 125.00 121.00

Half Dog Set Screw 60B00664 60B00664 60B00664 60B006647.00 7.00 7.00 7.00

Flat Head Socket Screw 60B00666 60B00666 60B00666 60B006663.00 3.00 3.00 3.00

Kick Spring (2) 90B01069 (2) 90B01069 (2) 90B01069 (2) 90B0106972.00 ea. 72.00 ea. 72.00 ea. 72.00 ea.

Housing 60B01068 60B01068 60B01642 60B01069*742.00 742.00 742.00 1150.00

Finger 60B00663 60B00999 60B00663 60B01700270.00 346.00 270.00 416.00

Core Spring 90A00952 90A00952 90A00952 90A0095245.00 45.00 45.00 45.00

Nose 60B01200 60B01200 60B01643 60B01200249.00 249.00 307.00 249.00

Sleeve ******** 60B01000 60B01644 ********249.00 249.00

Arm Assembly* 600K3200 600K3200 600K3205 600K3206865.00 865.00 870.00 1230.00

Skate ******** ******** ******** 60B01703367.00

*See next page for breakdown

L- 12

ARM ASSEMBLY(FOR OK-1 KICKOVER TOOLS)

ASSEMBLY 2” 2 1/2” 3” 4”Part Number 600K3200 600K3200 600K3205 600K3206Unit Price 865.00 865.00 870.00 1230.00

COMPONENTSArm Adapter 60B01067 60B01067 60B01067 ********

274.00 274.00 274.00

Arm 60B01066 60B01066 60B01066 60B01702461.00 461.00 461.00 954.00

Lower Adapter 60A00861 60A00861 60A00861 60A00861240.00 240.00 240.00 240.00

Arm Pin (2) 60B00667 (2) 60B00667 60B00667 (2) 60B0066714.00 ea. 14.00 ea. 14.00 14.00 ea.

Upper Arm Pin ******** ******** 60B00670 ********14.00

HOUSING ASSEMBLY(FOR 4” OK-1 KICKOVER TOOL)

ASSEMBLY 60B01069Unit Price 1150.00

Skate 60B01703367.00

Housing 60B01068742.00

Nose 60B01200249.00




moc.tni-sloot.www




L- 14

“OK-5” KICKOVER TOOLThe “OK-5” Kickover Tool is used toinstall and retrieve 1” devices in sidepocket mandrels with an orientingsleeve. The “OK-5” uses a ball detentand spring design to promote easyredress operation.

SNOITACIFICEPS"2"2"2"2"2 "2/12 "2/12 "2/12 "2/12 "2/12

.D.OkcenhsiF "573.1 "573.1

.D.O.xaM "057.1 "360.2

htgneLpUekaM "448.27 "448.27


"8/11x"4/1 "8/11x"4/1

"4/11x"61/3 "4/11x"61/3

wercSteS "881.x61-"8/3 "052.x61-"8/3

daerhTniPpoT 01-"61/51 01-"61/51

evlaV "1 "1


"3"3"3"3"3 "2/14 "2/14 "2/14 "2/14 "2/14

.D.OkcenhsiF "573.1 "573.1

.D.O.xaM "005.2 "005.3



"8/31x"4/1 "1x"4/1

"2/11x"61/3 "4/12x"61/3

wercSteS "052.x61-"8/3 "8/3x61-"8/3

daerhTniPpoT 01-"61/51 01-"61/51

evlaV "1 "1



2” “OK-5” KICKOVER TOOLASSEMBLY

Part Number 600K5200Unit Price 5125.00

COMPONENTSFishneck 60B01400 * 1/2” TC Ball 95TC0050

206.00 71.00

Finger Cage 60B01415 Spring Insert 60B014091062.00 34.00

Locator Finger 60B01402 * Flat Head 60B01410305.00 Socket Screw 3.00

* 8/32” Round Head (2) 60B00665 * Kick Spring (2) 90B01069Machine Screw 3.00 ea. 72.00 ea.

* Leaf Spring (2) 90B01068 Lower Adapter 60B0141179.00 ea. 270.00

Finger Housing 60B01403 Housing Barrel 60B01412458.00 839.00

* Socket Button (2) 60B01404 Nose 60B01413Cap Screw 3.00 ea. 229.00

Release Plunger 60B01405 Lock Ring 60B01414274.00 96.00

* Core Spring 90N00101 Arm Pin (2) 60B0066744.00 14.00 ea.

* Half Dog Set Screw 60B006647.00

Arm Adapter 60B01406320.00

Arm 60B01407544.00

* Detent Spring 90B01081117.00

* 9/16 TC Ball 95TC005684.00

Ball Seat 60B0140885.00

* Recommended Spares

L- 16

2 1/2” “OK-5” KICKOVER TOOLASSEMBLY


COMPONENTSFishneck 60B01400 Arm Adapter 60B01406

206.00 320.00

Finger Cage 60B01401 Arm 60B014071062.00 544.00

Locator Finger 60B01402 * Detent Spring 90B01081305.00 117.00

* Brass Finger Pin ******** * 9/16” TC Ball 95TC00560.25 84.00

* 8/32” Round Head (2) 60B00665 Ball Seat 60B01408Machine Screw 3.00 ea. 85.00

* #8 Lock Washer (2) ******** * 1/2” TC Ball 95TC00501.00 ea. 71.00

* Leaf Spring (2) 90B01068 Spring Insert 60B0140979.00 ea. 34.00

Finger Housing 60B01403 *Flat Head Socket Screw 60B01410458.00 3.00

* Centralizer Spring (2) 90B01080 * Kick Spring (2) 90B0106971.00 ea. 72.00 ea.

* Socket Button (2) 60B01404 Lower Adapter 60B01411Cap Screw 3.00 ea. 270.00

* Brass Shear Pin ******** Housing 60B014120.25 839.00

* Set Screw ******** Nose 60B014130.25 229.00









221.00 320.00







Finger Housing 60B01422 * Flat Head Socket Screw 60B01410495.00 3.00




* Set Screw ******** Nose 60B014250.25 276.00





L- 18




444.00 320.00











* Set Screw ******** Nose 60B014250.25 276.00


* Core Spring 90N00105 Upper Arm Pin 60A0165551.00 14.00

* Half Dog Set Screw 60B00664 Lower Arm Pin 60B006677.00 14.00

Skate 60B01833194.00

*Recommended Spares




moc.tni-sloot.www




L- 20

“OK-6” KICKOVER TOOLThe “OK-6” Kickover Tool is used toinstall and retrieve 1” devices in sidepocket mandrels with an orientingsleeve. The “OK-6” uses a ball detentand spring design to promote easyredress operation.

SNOITACIFICEPS"2/12 "2/12 "2/12 "2/12 "2/12 "3"3"3"3"3 "2/14 "2/14 "2/14 "2/14 "2/14


htgneLpUekaM "839.27 "260.07 "578.07regniF-niPleetSregnulPesaeleR

"8/11x"4/1 "8/31x"4/1 "1x"4/1"4/11x"61/3 "2/11x"61/3 "4/12x"61/3

wercSteS "052.x61-"8/3 "052.x61-"8/3 "8/3x61-"8/3wercSdaeHnottuB "8/3x02-"4/1 "8/3x02-"4/1 "8/3x02-"4/1

daerhTniPpoT 01-"61/51 01-"61/51 01-"61/51evlaV "1 "1 "1

epyTlerdnaM GBK,GMBK GBK,GMBK GBK,GMBK





206.00 320.00







Finger Housing 60B01403 *Flat Head Socket Screw 60B00666458.00 3.00

* Kick Spring (2) 90B01069 Centralizer Sleeve 60B0141971.00 ea. 573.00



* Set Screw ******** Nose 60B014130.25 229.00





L- 22




221.00 320.00








Centralizer Sleeve 60B01431 * Kick Spring (2) 90B01069626.00 72.00 ea.



* Set Screw ******** Nose 60B014250.25 276.00









444.00 320.00







Finger Housing 60B01827 * Flat Head Socket Screw (2) 60B00666726.00 3.00

Centralizer Sleeve 60B01834 * Kick Spring (2) 90B01069932.00 72.00 ea.

Lower Adapter 60B01411 Housing 60B01424270.00 839.00

* Brass Shear Pin ******** Nose 60B014250.25 276.00

* Set Screw ******** Lock Ring 60B018290.25 113.00

Release Plunger 60B01423 Upper Arm Pin 60A01655384.00 14.00

* Core Spring 90N00105 Lower Arm Pin 60B0066751.00 14.00

* Half Dog Set Screw 60B00664 Skate 60B018337.00 194.00

*Recommended Spares

L- 24

“OM-1” KICKOVER TOOLThe “OM-1” Kickover Tool is used toinstall and retrieve 1 1/2” devices inside pocket mandrels with anorienting sleeve.

SNOITACIFICEPS"2/12 "2/12 "2/12 "2/12 "2/12 "3"3"3"3"3


htgneLpUekaM "365.08 "057.08regniF-niPleetS

egniHgnirpS"1x"4/1 "8/71x"4/1"4/31x"61/3 "4/31x"61/3

egniHgnirpS-niPssarBretpadAmrA

retpadArewoLregnulPesaeleR

"4/31x"61/3 "4/31x"61/3"4/31x"61/3 "4/31x"61/3"4/31x"61/3 "4/31x"61/3"61/11x"61/3 "61/11x"61/3

wercSteS "2/1x02-"4/1 "2/1x02-"4/1daerhTniPpoT 01-"61/51 01-"61/51

evlaV "2/11 "2/11epyTlerdnaM GMM GMM

"2/14 "2/14 "2/14 "2/14 "2/14 "2/15 "2/15 "2/15 "2/15 "2/15.D.OkcenhsiF "573.1 "13.2

.D.O.xaM "017.3 "052.4htgneLpUekaM "886.08 "886.49

regniF-niPleetSegniHkciKlanretnI

egniHgnirpS

"8/71x"4/1 "8/71x"61/5"4/31x"61/3 "4/31x"61/3"4/31x"61/3 "4/31X"61/3

egniHgnirpS-niPssarBretpadAmrA

retpadArewoLregnulPesaeleR

"4/31x"61/3 "4/31x"61/3"4/31x"61/3 "4/31x"4/1"4/31x"61/3 "4/31x"61/3"61/11x"4/1 "8/71x"4/1

wercSteS "2/1x02-"4/1 "2/1x02-"4/1daerhTniPpoT 01-"61/51 01-"61/91

evlaV "2/11 "2/11epyTlerdnaM GMM GMM)2(sniPlloR ******** "2/1x"4/1


2 1/2” “OM-1” KICKOVER TOOLASSEMBLY

Part Number 600M1250Unit Price 7315.00

COMPONENTSFishneck 60B01664

357.00

Finger 60B00663270.00

Finger Housing 60B01665724.00

Leaf Spring (2) 90B0106879.00 ea.

Finger Cage 60B016661964.00

8/32” Screw (2) 60B006653.00 ea.

Core Spring 90A0095245.00

Release Plunger 60B01657584.00

Lock Ring 60B01658165.00

Half Dog Set Screw 60B006687.00


Flat Head Socket Screw 60B006663.00

Kick Spring (2) 90B0107279.00 ea.

Spring Hinge 60B01651285.00

Arm 60B01667776.00

Arm Pin (2) 60B0166319.00 ea.

Lower Adapter 60B01660464.00

Housing 60B016541152.00

L- 26

3” “OM-1” KICKOVER TOOLASSEMBLY


COMPONENTSFishneck 60B01659 Half Dog Set Screw 60B00668

379.00 7.00

Finger 60B00663 Arm Adapter 60B01655270.00 523.00

Spring Base 60B01662 Flat Head Socket Screw 60B0066646.00 3.00

Finger Housing 60B01650 Kick Spring (2) 90B01072718.00 79.00 ea.

Leaf Spring (2) 90B01068 Spring Hinge 60B0165179.00 ea. 285.00


8/32” Screw (2) 60B00665 Arm Pin (2) 60B016633.00 ea. 19.00 ea.

Core Spring 90A00952 Lower Adapter 60B0166045.00 464.00

Release Plunger 60B01657 Housing Assembly 600M1301584.00 1250.00

Release Spring 90B01071 Housing 60B01654109.00 1152.00

Lock Ring 60B01658 Skate 60B01653165.00 113.00





392.00 523.00

Finger 60B00663 Flat Head Socket Screw 60B00666270.00 3.00

Spring Base 60B01077 Kick Spring (6) 90B0107255.00 79.00 ea.

Finger Housing 60B01078 Spring Hinge 60B01651780.00 285.00

Leaf Spring (2) 90B01068 Arm 60B0108479.00 ea. 874.00

Finger Cage 60B01082 Arm Pin (2) 60B016632022.00 19.00 ea.

8/32” Screw (2) 60B00665 Lower Adapter 60B016603.00 ea. 464.00

Core Spring 90A00952 Internal Kick Hinge 60B0110945.00 131.00

Release Plunger 60B01657 Internal Kick Hinge 60B01110584.00 Bolt & Nut 8.00

Release Spring 90B01071 Housing Assembly 600M1451109.00 1425.00

Lock Ring 60B01658 Sleeve 60B01081165.00 330.00

Half Dog Set Screw 60B00668 Housing 60B010837.00 808.00

Nose 60B01080343.00

L- 28



COMPONENTSFishneck 60B01107 Flat Head Socket Screw 60B00666

562.00 3.00

Finger 60B01092 Kick Spring (7) 90B01072492.00 79.00

Upper Arm Pin 60B01090 Spring Hinge 60B0165165.00 285.00

Finger Housing 60B01097 Arm 60B010931542.00 1177.00

Leaf Spring (2) 90B01073 Lower Arm Pin 60B0166389.00 ea. 19.00

Finger Cage 60B01098 Lower Adapter 60B016604550.00 464.00

8/32” Screw (2) 60B00665 Internal Kick Hinge 60B011093.00 ea. 131.00

Core Spring 90B01074 Internal Kick Hinge Bolt & Nut 60B01110174.00 8.00

Release Plunger 60B01096 Housing Assembly 600M15511059.00 2775.00

Lock Ring 60B01095 Nose 60B01091244.00 578.00

Locking Screw (2) 60B00668 Kick Spring Block 60B010897.00 176.00

Half Dog Set Screw 60B00669 Housing 60B0109910.00 2668.00





moc.tni-sloot.www




L- 30

“OM-5” KICKOVER TOOLThe “OM-5” Kickover Tool is used toinstall and retrieve 1 1/2” devices inside pocket mandrels with anorienting sleeve. The “OM-5” uses aball detent and spring design topromote easy redress operation.

SNOITACIFICEPS"2/12 "2/12 "2/12 "2/12 "2/12 "3"3"3"3"3


htgneLpUekaM "218.39 "218.39regniF-niPraehSleetS "1x"4/1 "1x"4/1

niPraehSssarB "8/51x"8/1 "61/91x"8/1wercSteS enoN "8/3x61-"8/3

daerhTniPpoT 01-"61/51 01-"61/51evlaV "2/11 "2/11

epyTlerdnaM GRMM,GMM GRMM,GMM




COMPONENTSFishneck 60B01845 *Kick Spring (2) 90B01072

376.00 79.00 ea.

Locator Finger 60B01402 *Detent Spring 90B01082305.00 177.00

*Leaf Spring (3) 90B01068 Arm 60B0183879.00 ea. 844.00

Finger Housing 60B01835 Lock Ring 60B01839825.00 163.00

*8/32” Screw (2) 60B00665 Lower Detent Plunger 60B017073.00 ea. 134.00

*#8 Lock Washer (2) ******** *Brass Finger Pin ********.25 ea. .25

*Core Spring 90A00952 *Brass Shear Pin ********45.00 .25

Finger Cage 60B01836 *Half Dog Set Screw 60B018051952.00 11.00

Release Plunger 60B01837 Lower Adapter 60B01846643.00 475.00

*9/16” TC Ball (2) 95TC0056 Arm Pin (2) 60B0166384.00 ea. 19.00 ea.

Upper Detent Sleeve 60B01808 Arm Adapter 60B01842117.00 285.00

*Flat Head Socket Screw 60B00666 Housing 60B018433.00 902.00

Nose 60B01844381.00

*Recommended Spares

L- 32

3” “OM-5” KICKOVER TOOLASSEMBLY


COMPONENTSFishneck 60B01800 9/16” TC Ball (2) 95TC0056

376.00 84.00 ea.

*Cap Screw (2) 60B01404 Upper Detent Sleeve 60B018083.00 ea. 117.00

*Centralizer Spring (2) 90B01080 *Flat Head Socket Screw 60B0066671.00 ea. 3.00

Locator Finger 60B01402 *Kick Spring (3) 90B01072305.00 79.00 ea.

*Leaf Spring (3) 90B01068 *Detent Spring 90B0108279.00 ea. 177.00

Finger Housing 60B01802 Arm 60B01706825.00 843.00

*Brass Finger Pin ******** Lock Ring 60B01804.25 163.00

*8/32” Screw (2) 60B00665 Lower Detent Plunger 60B017073.00 ea. 134.00

*#8 Lock Washer (2) ******** *Half Dog Set Screw 60B01805.25 ea. 11.00

*Brass Shear Pin ******** Lower Adapter 60B01708.25 475.00

*Set Screw ******** Arm Pin (2) 60B01806.25 33.00 ea.

*Core Spring 90A00952 Arm Adapter 60B0180745.00 285.00

Finger Cage 60B01801 Housing 60B017091952.00 901.00

Release Plunger 60B01803 Nose 60B01710643.00 381.00

Skate 60B01809194.00

*Recommended Spares




moc.tni-sloot.www




L- 34

“R” KICKOVER TOOLThe “R” Kickover Tool is used toinstall and retrieve 1 1/2” devices inside pocket mandrels.

SNOITACIFICEPS"2"2"2"2"2 "2/12 "2/12 "2/12 "2/12 "2/12

.D.OkcenhsiF "573.1 "573.1denepO-.D.O.xaM

detcarteR"318.3 "318.3"958.1 "182.2


sniPleetS "573.1x"61/31"734.1x"61/31

"573.1x"61/31"734.1x"61/31

daerhTniPpoT 01-"61/51 01-"61/51daerhTxoBmottoB 01-"61/51 01-"61/51

evlaV "2/11 "2/11epyTlerdnaM MM,AMM MM,AMM

"3"3"3"3"3.D.OkcenhsiF "573.1

denepO-.D.O.xaMdetcarteR

"886.5"005.2

htgneLpUekaM "005.92

sniPleetS "573.1x"61/31"734.1x"61/31

daerhTniPpoT 01-"61/51daerhTxoBmottoB 01-"61/51

evlaV "2/11epyTlerdnaM MM,AMM


“R” KICKOVER TOOLASSEMBLY 2” 2 1/2” 3”

Part Number 60R01200 60R01250 60R01300Unit Price 2345.00 2345.00 3180.00

COMPONENTSAdapter 60B01351 60B01351 60B01351

117.00 117.00 117.00

Mandrel 60B01379 60B01379 60B01380510.00 510.00 590.00

Barrel 60B01347 60B01347 60B01350409.00 409.00 480.00

Arm Hinge Pin (6) 60A01641 (6) 60A01641 (6) 60A0164123.00 ea. 23.00 ea. 23.00 ea.

Arm Assembly* (2) 60R00200 (2) 60R00250 (2) 60R00300330.00 ea. 330.00 ea. 595.00 ea.

Locking Arm Assembly* 60R00201 60R00251 60R00301330.00 330.00 595.00

Sleeve 60B01352 60B01352 60B01352141.00 141.00 141.00

Extension Spring 90B01634 90B01634 90B0163433.00 33.00 33.00

Friction Spring 90B01354 90B01354 90B0135459.00 59.00 59.00

Fluted Bushing 60B01354 60B01354 60B0135485.00 85.00 85.00

Finger (2) 60B01168 (2) 60B01168 (2) 60B01168123.00 ea. 123.00 ea. 123.00 ea.

Finger Hinge Pin (2) 60A01377 (2) 60A01377 (2) 60A0137722.00 ea. 22.00 ea. 22.00 ea.

Finger Spring 90B01169 90B01169 90B0116922.00 22.00 22.00

Finger Sub 60B00986 60B00986 60B00986164.00 164.00 164.00

*See next page for breakdown

L- 36

ARM ASSEMBLY FOR “R” KOT(2 REQUIRED)

ASSEMBLY 2” 2 1/2” 3”Part Number 60R00200 60R00250 60R00300Unit Price 330.00 ea. 330.00 ea. 595.00 ea.

COMPONENTSUpper Arm 60B01353 60B01385 60B01349

146.00 146.00 247.00

Lower Arm 60B01378 60B01376 60B01360146.00 146.00 247.00

Arm Pin 60A01650 60A01650 60A0165019.00 19.00 19.00

Carbide Pad 60A01378 60A01378 60A0137943.00 43.00 43.00

LOCKING ARM ASSEMBLY FOR “R” KOT

COMPLETE ASSEMBLY 2” 2 1/2” 3”Part Number 60R00201 60R00251 60R00301Unit Price 330.00 330.00 595.00

COMPONENTSLocking Upper Arm 60B01377 60B01384 60B01361

146.00 146.00 247.00

Lower Arm 60B01376 60B01386 60B01362146.00 146.00 247.00

Carbide Pad 60A01378 60A01379 60A0137943.00 43.00 43.00

Arm Pin 60A01650 60A01650 60A0165019.00 19.00 19.00

M-1Prices effective June 1, 2012 1-800-338-0308

M

MISCELLANEOUS EQUIPMENT

M-2

SWAB CUPSSIZE 2” 2 1/2” 3”

Part Number 93CUP200 93CUP250 93CUP300Unit Price 38.00 50.00 71.00

O-RINGSO-RING NUMBER BUNA VITON

#004-012 .55 .80#013-019 .75 1.05#020-028 .85 2.20#029-032 1.00 3.05#033-035 1.10 3.40#036-044 1.40 5.80

#110-116 .75 1.40#117-124 .85 2.35#125-132 1.00 3.25#133-141 1.10 4.05#142-152 1.40 5.35

#202-208 .75 1.60#209-217 .85 3.30#218-223 1.00 4.65#224-227 1.10 5.50#228-235 1.40 7.95#236-243 1.65 10.00

#313-319 .85 ****#320-324 1.00 ****#325-329 1.10 9.10#330-340 1.65 9.35

SPUCBAWS-SNOITACIFICEPS"2"2"2"2"2 "2/12 "2/12 "2/12 "2/12 "2/12 "3"3"3"3"3

)dradnatS(.D.OpuC "069.1 "093.2 "759.2


VEE PACKING(IN PART NUMBER ORDER)

PART NO. DESCRIPTION TYPE NET PRICE

91V12140 1.710” TICR standard 6.1291V12300 2.000” TICR standard 5.9391V13300 2.813” TICX standard 6.3591V14400 1.875” TICR standard 20.3991V17200 2.125” TICPR moly-filled 7.81

91V30200 91V302 11.2991V30400 1.781” T standard 5.1391V31000 1.875” S and TICX standard 4.4691V31000-OS 1.875” S and TICX (oversized) standard 4.5491V31800 2.313” S and TICX standard 4.57

91V32000 3.813” S and TICX standard 9.6191V33080 1.875” TICPX standard 4.9891V33170 3.313” TICX standard 12.0891V33760 2.750” TICX standard 6.5591V33790 1.781” TICR standard 5.36

91V33850 2.562” TICR standard 7.7091V34500 1.250” S standard 4.5391V34600 1.625” S and TICX standard 4.6291V34601 1.625” TICX moly-filled 6.5691V34700 1 1/2” S and TICX standard 4.62

91V34730 1.250”/2.313” TICPX moly-filled 5.1691V35200 91V352 standard 4.5091V36600 2.750” T standard 6.9391V36600-001 2.750” T moly-filled 10.5091V37520 1.250” S/2.313” TICPX ryton 9.96

91V38000 2.188” T and TICR standard 5.5491V40070 1.710” TICPR moly-filled 7.7491V40080 1.710” TICPR ryton 7.8991V40770 1.875” TICPX moly-filled 5.4591V43080 2.313” S and TICX moly-filled 8.89

91V43090 2.313” TICR ryton 13.6091V43230 2.125” TICPR ryton 8.4491V43810 3.813” TICX moly-filled 10.8991V43830 3.688” TICR moly-filled 15.7091V43940 2.813” TICX ryton 17.37

91V43950 2.813” TICX moly-filled 8.1091V43960 2.750” TICX ryton 12.4391V43970 2.750” TICX moly-filled 9.9091V43990 2.562” TICPR ryton 10.5091V44000 2.562” TICR moly-filled 7.15

91V44020 2.188” TICR moly-filled 10.1391V44030 2.188” TICR ryton 10.6291V44040 2.125” TICR ryton 11.2991V44050 2.125” TICR moly-filled 6.4991V44100 1.875” TICX ryton 9.82

*Prices subject to change

M-4

VEE PACKING (CONT’D)(IN PART NUMBER ORDER)

PART NO. DESCRIPTION TYPE NET PRICE

91V44110 1.875” TICX moly-filled 8.2591V44120 1.781” TICR ryton 8.5391V44130 1.781” TICR moly-filled 6.7391V44140 1.710” TICR ryton 8.5591V44150 1.710” TICR moly-filled 6.82

91V45130 1.500”/2.750”/2.813”/3.813” TICPX ryton 8.5491V45140 1.500”TICX/S and 2.750” TICPX moly-filled 6.2391V47920 1.500”/1.625” TICPX moly-filled 5.5691V48270 2.188”/2.313” TICPR and 1.875” TICPX ryton 6.2991V64000 2.875” S standard 9.24

910R3054 2.313” Packing Adapter O-Ring 10.7891A00500 2” A Blanking Plug 7.0191A00501 2 1/2” A Blanking Plug 5.36

91A01079 2” C Lock 6.1391A00584 2 1/2” C Lock 7.12

91A01080 1 1/4” Standing Valve 3.98

91AK0000 AK Packing 4.1591BK0000 BK Packing 4.8391BK0001 BK Teflon Adapter Ring 3.1791BK0002 BK Hi-Temp Packing 5.80

91BKR143 1.43” Baker standard 5.2891BKR150 1.50” Baker standard 4.9691BKR178 1.78” Baker standard 4.9591BKR178-001 1.78” Baker moly-filled 7.0091BKR181 1.81” Baker standard 4.9591BKR181-001 1.81” Baker moly-filled 7.0491BKR187 1.87” Baker standard 4.9891BKR187-001 1.87” Baker moly-filled 7.0891BKR225 2.25” Baker standard 5.3991BKR225-001 2.25” Baker moly-filled 7.0891BKR231 2.31” Baker standard 5.0891BKR256 2.56” Baker standard 5.5991BKR275 2.75” Baker standard 10.0191BKR281 2.81” Baker standard 6.31

91RCL150 RC Lower 4.9191RCL151 Lower Adapter Ring 3.1791RCU150 RC Upper 4.9191RCU151 Upper Adapter Ring 3.17

*Prices subject to change


VEE PACKING(BY PLUG DESCRIPTION)

*Prices are net and subject to change

gulP&kcoLkcoL

dradnatSkcoL

delliF-yloMkcoLnotyR

gulPdradnatS

gulPdelliF-yloM

gulPnotyR

RRPCIT"017.1 04121V1921.6$

05144V1928.6$

04144V1955.8$

A/N 07004V1947.7$

08004V1998.7$

RRPCIT"187.1 09733V1963.5$

03144V1937.6$

02144V1935.8$

A/N 00271V1918.7$

03234V1944.8$

RRPCIT"578.1 00441V1993.02$

01144V1952.8$

00144V1928.9$

A/N 00271V1918.7$

03234V1944.8$

RRPCIT"000.2 00321V1981.5$

A/N A/N A/N A/N A/N

RRPCIT"521.2 A/N 05044V1994.6$

04044V1992.11$

A/N 00271V1918.7$

03234V1944.8$

RRPCIT"881.2 00083V1945.5$

02044V1931.01$

03044V1926.01$

08033V1989.4$

07704V1954.5$

07284V1992.6$

RRPCIT"313.2 A/N 08034V1998.8$

09034V1906.31$

08033V1989.4$

07704V1954.5$

07284V1992.6$

RRPCIT"265.2 05833V1907.7$

00044V1951.7$

09934V1905.01$

00543V1935.4$

03743V1961.5$

02573V1969.9$

XXPCIT"005.1 00743V1926.4$

04154V1932.6$

03154V1945.8$

A/N 02974V1965.5$

A/N

XXPCIT"526.1 00643V1926.4$

10643V1965.6$

A/N A/N 02974V1965.5$

A/N

XXPCIT"578.1 00013V1964.4$

01144V1952.8$

00144V1928.9$

08033V1989.4$

07704V1954.5$

07284V1992.6$

XXPCIT"313.2 00813V1975.4$

08034V1998.8$

09034V1906.31$

00543V1935.4$

03743V1961.5$

02573V1969.9$

XXPCIT"057.2 06733V1955.6$

07934V1909.9$

06934V1934.21$

00743V1926.4$

04154V1932.6$

03154V1945.8$

XXPCIT"318.2 00331V1953.6$

05934V1901.8$

04934V1973.71$

00743V1926.4$

04154V1932.6$

03154V1945.8$

XXPCIT"318.3 00023V1916.9$

01834V1998.01$

A/N 00743V1926.4$

04154V1932.6$

03154V1945.8$

M-6

STUFFING BOX PACKINGDESCRIPTION PART NO. NET PRICE

Standard Buna 91ST0000 1.09Available in either black or blue, standard service, lowpressure applications, integral cotton fabric, 200 degreesmaximum temperature

Graphite 91ST0002 1.20Same as above with graphite lubricant

Solid Buna 91ST0005 1.0090 durometer, good for higher pressure than StandardBuna with fabric, 200 degree maximum temperature

Urethane (High Pressure) 91ST0001 1.67Solid Urethane, good for high pressure, very good wearresistance

Solid Viton 91ST0006 2.26Good for high temperature, 400 degree maximum, goodfor various chemical resistance

Solid Buna 91ST0004 2.73Crown Type, has fabric heal providing good service in highand low pressure

HSN Solid 91ST0007 2.63Good for sour service and temperatures of 200 degrees to250 degrees, good wear resistance

HSN Crown Type 91ST0008 3.99Same as above but equipped with fabric heal

Packing Puller 91ST0003 20.13

Prices effective June 1, 2012 1-800-338-0308 N-1

N

TIC “PLUNK” BOTTOM HOLEPRESSURE INSTRUMENT

ACCESSORIES

N-2

TIC “PLUNK” BOMBROPE SOCKET

ASSEMBLYPart Number 48PL0100Unit Price 215.00

COMPONENTSBody 48PL0101 Spool 43A00343

181.00 14.00

Spring 90A01133 Thimble 43A0034211.00 14.00

The TIC “Plunk” Bomb Rope Socketprovides a means for connecting thewireline to the tool string. The wire iswrapped around the spool and thentied in a knot. The spring serves as acushion to prevent the wire tie fromstraightening out and releasingduring wireline operations.

SNOITACIFICEPSkcenhsiF "8/7

htgneLllarevO "578.7daerhTxoBmottoB 01-"61/51

.D.O "052.1


TIC “PLUNK” SOCKETAND BALL CONNECTOR


COMPONENTSSocket 48PL0201

144.00

Ball Sub 48PL0202116.00

The TIC “Plunk” Socket and BallConnector uses a quick connectdesign to facilitate safe and efficientattchment of Wireline MomeoryGauges (Bombs) being run intandem. It is manufactured out ofstainless steel to minimize corrosion.Wrench flats are provided on bothsections to prevent distortion of thebox connections.

• Pipe wrenches should not be used.

• Not recommended when heavyjarring is necessary.

SNOITACIFICEPS.D.O "052.1

htgneLllarevO "578.5tekcoSnodaerhTxoB 02-"380.1

llaBnodaerhTxoB 61-"4/3

N-4

TIC “PLUNK” SOFTRELEASE SUB


COMPONENTSMandrel 48PL0301 Spring 90NPL003

187.00 46.00

Body 48PL0302 Lower Sub 48PL0303314.00 258.00

The TIC “Plunk” Soft Release Sub ismade up directly to the upperconnection of the Wireline MemoryGauge. This tool is required whensetting gauges with the “Plunk”Release Tools. It also acts as a shockabsorber when retrieving the gaugefrom the well.

It is manufactured out of stainlesssteel to minimize corrosion. Wrenchflats are provided on both sections toprevent distortion of the boxconnection and inside diameter.



SNOITACIFICEPSkcenhsiF "578.0

htgneLllarevO "318.9daerhTxoBmottoB 61-"4/3

.D.O "052.1


TIC “PLUNK” MECHANICALRELEASE TOOL


COMPONENTSTop Sub 48PL0401 Core Spring 90NPL001

351.00 45.00

Whisker Spring 90NPL005 Dog Spring 90NPL00223.00 49.00

Activator Spring 90NPL004 Dog (2) 48PL040344.00 184.00 ea.

Core 48PL0402 Housing 48PL0404204.00 313.00

The TIC “Plunk” Mechanical ReleaseTool is designed to “soft set” releaseWireline Memory Gauges. When theWireline Memory Gauges reach theno go restriction or stop, the weightof the tool string forces the dogs intothe release position. The bomb isthen released and the MechanicalRelease Tool can be brought to thesurface.

Wrench flats are provided to preventdistortion to the inside diameter. Thetool is made out of stainless steel oralloy.• Pipe wrenches should not be

used.


htgneLllarevO "958.9daerhTniPpoT 61-"4/3

.D.O "573.1sesaeleR buStfoS

niPlloR "1x"23/5)2(niPrettoC "1x"8/1

N-6

TIC “PLUNK” WHISKEREDBOMB HANGER (FOR TUBING)


COMPONENTSBody 48PL0501 Core 48PL0506

296.00 126.00

Dog Grab (2) 48PL0502 Lower Sub 48PL0507105.00 ea. 204.00

Arm (2) 48PL0505 Whisker Spring 90NPL00560.00 ea. 23.00

Core Spring 90NPL00730.00

The TIC “Plunk” Whiskered Bomb Hanger forTubing can be used to set Wireline MemoryGauges in the tubing. A whisker spring is used tokeep the dogs retracted while the tool string ismoving downward. When the desired depth isreached, upward movement through a collar willtrip the whisker spring and activate the retracteddogs into locating position. Upon first downwardmovement of the tool string, the dogs will locatedirectly into the tubing wall.

Wrench flats are provided to prevent distortion ofthe box connection and inside diameter. The toolis made out of stainless steel except for the dogsand attaching arms which are alloy. The dogs areeasily replaced and should be when the teethbecome worn.


• Not recommended when heavy jarring isnecessary.

SNOITACIFICEPShtgneLllarevO "005.21


.D.O "052.1niPrettoC "1x"8/1niPlewoD "4/11x"4/1

"2/13dna,"8/72,"8/32rofsgoD


TIC “PLUNK” WHISKEREDBOMB HANGER (FOR COLLARS)


COMPONENTSBody 48PL0501 Core Spring 90NPL007

296.00 30.00

Dog Grab (2) 48PL0602 Lower Sub 48PL0507105.00 ea. 204.00

Arm (2) 48PL0505 Whisker Spring 90NPL00560.00 ea. 23.00

Core 48PL0506126.00

The TIC “Plunk” Whiskered Bomb Hanger forCollars can be used to set Wireline MemoryGauges in collared tubing. A whisker spring isused to keep the dogs retracted while the toolstring is moving downward. When the desireddepth is reached, upward movement through acollar will trip the whisker spring and activate theretracted dogs into locating position. An easydownward movement of the tool string will allowthe dogs to locate in the tubing collar.

Wrench flats are provided to prevent distortionof the box connection and inside diameter. Thetool is made out of stainless steel exept for thedogs and attaching arms which are alloy. Thedogs are easily replaced and should be when theedges become worn.


• Not recommended when heavy jarring isnecessary.



.D.O "052.1niPrettoC "1x"8/1niPlewoD "4/11x"4/1

"2/13dna,"8/72,"8/32rofsgoD

N-8

TIC “PLUNK” WHISKEREDBOMB HANGER (FOR CASING)

The TIC “Plunk” Whiskered BombHanger for Casing can be used to setWireline Memory Gauges in casing. Awhisker spring is used to keep thedogs retracted while the tool string ismoving downward. When the whiskerspring exits the tubing, it allows theretracted dogs to expand into thelocating position. Continueddownward movement will allow thesedogs to exit the tubing and set in thecasing.

The Whiskered Bomb Hanger forCasing is equipped with a built-inhanger safety tool that will preventthe Wireline Memory Gauges fromfalling downhole if a line break shouldoccur.The Whiskered Bomb Hanger ismanufactured out of stainless steel tominimize corrosion. Wrench flats areprovided to prevent distortion ofinside diameters.




.D.O.xaM "005.1niPrettoC "1x"8/1

)2(niPlewoD "573.1x"8/3gnisaC"7dna,"2/15,"2/14rofsgoD


TIC “PLUNK” WHISKEREDBOMB HANGER (FOR CASING)

ASSEMBLY 4 1/2” 5 1/2”Part Number 48PL0700 48PL0750Unit Price 1905.00 1905.00

COMPONENTSTop Sub 48PL0701 48PL0701

331.00 331.00

Top Spring 90NPL008 90NPL00837.00 37.00

Nut 48PL0702 48PL070290.00 90.00

Upper Adapter 48PL0703 48PL0703123.00 123.00

Spring Adapter 48PL0704 48PL0704102.00 102.00

Body 48PL0705 48PL0705757.00 757.00

Core Spring (2) 90NPL009 (2) 90NPL00926.00 ea. 26.00 ea.

Upper Core 48PL0706 48PL0706178.00 178.00

Swivel Arm (2) 48PL0707 (2) 48PL070772.00 ea. 72.00 ea.

Upper Dog Grab (2) 48PL0708 (2) 48PL0712105.00 ea. 105.00 ea.

Lower Dog Grab (2) 48PL0709 (2) 48PL0711105.00 ea. 105.00 ea.

Arm (2) 48PL0710 (2) 48PL071072.00 ea. 72.00 ea.

Lower Core 48PL0720 48PL0720178.00 178.00

Lower Sub 48PL0721 48PL0721463.00 463.00

Whisker Spring 90NPL005 90NPL00523.00 23.00

N-10

TIC “PLUNK” HYDROCHRONRELEASING AND SETTING TOOL

The TIC “Plunk” HydrochronReleasing and Setting Toolhydraulically sets and releasesWireline Memory Gauges. TheHydrochron can safely set andrelease the gauges in conjunctionwith the Collar, Tubing, and CasingHanger. The Hydrochron also can setand release gauges in no-gorestrictions or upon stops.

The Hydrochron must be used inconjunction with the TIC “Plunk” SoftSub. Wrench flats are provided andmust be used to prevent distortion ofinside diameters. The tool is madeout of stainless steel to minimizecorrosion.


SNOITACIFICEPSkcenhsiF "573.1

daerhTniPpoT 01-"61/51htgneLllarevO "057.11

sesaeleR buStfoS.D.O "573.1

liOdradnatS thgieW05

wercSteS "61/3x"23-01tleffoeceipllams/w

Prices effective June 1, 2012 1-800-338-0308 N-1 1

TIC “PLUNK” HYDROCHRONRELEASING AND SETTING TOOL


COMPONENTSTop Sub 48PL0801

207.00

Pin Sleeve (2) 48PL080360.00 ea.

Spring Retainer 48PL0804137.00

Upper Pin 48PL080214.00

Housing 48PL0805413.00

Spring 90NPL01050.00

Pin Cup 48PL080687.00

Piston 48PL0808154.00

Self Locking Nut (2) 48PL08072.00 ea.

Self Locking Nut 48PL0809with By-Pass Slot 2.00

Load Plug 48PL081461.00

Lower Pin 48PL081114.00

Dog 48PL0812204.00

Bottom Sub 48PL0813207.00

O-ring (3) #006.55 ea.

O-ring #117.85

N-12

TIC “PLUNK”HANGER-SAFETY TOOL

The TIC “Plunk” Hanger-Safety Tooluses the weight of the WirelineMemory Gauges to keep the springloaded dog grabs retracted. If for anyreason there is a loss of line tension,the spring will cause the dog grabs toexpand and catch the inside diameterof the tubing. The Hanger-Safety Toolwill prevent the Wireline MemoryGauges from falling downhole if a linebreak should occur. With this tool, thechances of gauge replacement orcostly fishing jobs are greatlyminimized.

An additional feature of this tool isthat it can be used to hang MemoryGauges at any point in the tubing.The Hanger-Safety Tool ismanufactured out of stainless steel tominimize corrosion. Wrench flats areprovided to prevent distortion of thebox connection and inside diameter.



SEZISLLA-SNOITACIFICEPShtgneLllarevO "005.51


.D.O "052.1

sniPlewoD"4/11x"4/1"1x"4/1

"2/13dna,"8/72,"8/32rofsgoD


TIC “PLUNK”HANGER-SAFETY TOOL

ASSEMBLY 2 3/8” 2 7/8” 3 1/2”Part Number 48PL0900 48PL0925 48PL0930Unit Price 1030.00 1030.00 1030.00

COMPONENTSTop Sub 48PL0901 48PL0901 48PL0901

144.00 144.00 144.00

Top Spring 90NPL011 90NPL011 90NPL01133.00 33.00 33.00

Core Cap 48PL0902 48PL0902 48PL090284.00 84.00 84.00

Adapter 48PL0903 48PL0903 48PL090368.00 68.00 68.00

Spring Adapter 48PL0904 48PL0904 48PL090476.00 76.00 76.00

Core Spring 90NPL012 90NPL012 90NPL01239.00 39.00 39.00

Core 48PL0905 48PL0905 48PL0905148.00 148.00 148.00

Arm (2) 48PL0906 (2) 48PL0906 (2) 48PL090672.00 ea. 72.00 ea. 72.00 ea.

Dog Grab (2) 48PL0907 (2) 48PL0909 (2) 48PL0910102.00 ea. 102.00 ea. 102.00 ea.

Bottom Sub 48PL0908 48PL0908 48PL0908225.00 225.00 225.00

N-14

TIC “PLUNK” TOPNO GO SUB

TIC “PLUNK” BOTTOMNO GO SUB

Part Number 48PL1100Unit Price 377.00

Part Number 48PL1200Unit Price 332.00

The TIC “Plunk” Top No Go Sub is afour blade centralizing sub. It is madeup to the top connection of theWireline Memory Gauge and allowsthe instruments to hang from the nogo restriction.

The tool is of one piece constructionand made out of heat treated 17-4stainless steel.

The TIC “Plunk” Bottom No Go Sub isa four blade Thermometer WellHousing. It replaces the ThermometerHousing on the Wireline MemoryGauge and allows the instruments toset upon the no go restriction.

The tool is of one piece constructionand made out of heat treated 17-4stainless steel.



snoitacificepss'remotsucrep.d.o

SNOITACIFICEPShtgneLllarevO "000.8daerhTxobpoT 02-"380.1

snoitacificepss'remotsucrep.d.o




moc.tni-sloot.www




N-16

TIC “PLUNK” PARAFFIN TOOLThe TIC “Plunk” Parafin Toolsincorporate the use of interchange-able rotating cutting blades to removeparaffin from the tubing wall. Thecutting blade O.D. can be made tocustomer’s specifications.

The upper section of the Paraffin Toolis machined with a Ball and SocketQuick Connect. The Quick Connectallows the cutting blade section to bechanged easily.

SEZISLLA-SNOITACIFICEPShtgneLllarevO "005.81

daerhTniPpoT 01-"61/51daerhTniPmottoB 31-"2/1

.D.O efinknosdneped"8/32-efinK "609.1"8/72 "343.2"2/13 "609.2)2(stuNxeH 31-"2/1

wercSteS "61/3x81-"61/5


TIC “PLUNK” PARAFFIN TOOLASSEMBLY 2 3/8” 2 7/8” 3 1/2”

Part Number 48PL1300 48PL1325 48PL1330Unit Price 535.00 545.00 560.00

COMPONENTSTop Sub 48PL1301 48PL1301 48PL1301

117.00 117.00 117.00

Body 48PL1302 48PL1302 48PL1302201.00 201.00 201.00

Mandrel 48PL1303 48PL1303 48PL1303193.00 193.00 193.00

Knife 48PL1304 48PL1305 48PL1306120.00 130.00 140.00

Hex Nut (2) 48PL1307 (2) 48PL1307 (2) 48PL13072.00 ea. 2.00 ea. 2.00 ea.

N-18

TIC “PLUNK”BOMB OVERSHOT


COMPONENTSFishneck 48PL1401 Housing 48PL1402

247.00 284.00

Spring 90NPL013 Dog (2) 48PL140355.00 108.00 ea.

The TIC “Plunk” Bomb Overshot is anon-releasable overshot designed tolatch and retrieve the “Plunk” SoftRelease Sub or the “Plunk” RopeSocket.


htgneLllarevO "786.8daerhTniPpoT 61-"4/3

.D.O "573.1

sehctaL /buStfoStekcoSepoR

Prices effective June 1, 2012 1-800-338-0308 O-1

O

BAKER STYLE TOOLS

O-2

“TICD-2” SHIFTING TOOLThe “TICD-2” Shifting Tool is used toprovide a safe, selective, andcontrolled method of opening andclosing Type “TL” CirculatingSleeves.

eziS eziS eziS eziS eziS "187.1 "187.1 "187.1 "187.1 "187.1 "18.1 "18.1 "18.1 "18.1 "18.1 "78.1 "78.1 "78.1 "78.1 "78.1 "52.2 "52.2 "52.2 "52.2 "52.2

rebmuNtraP rebmuNtraP rebmuNtraP rebmuNtraP rebmuNtraP 08712D41 01812D41 07812D41 05222D41)ten(ecirPtinU )ten(ecirPtinU )ten(ecirPtinU )ten(ecirPtinU )ten(ecirPtinU 00.0832 00.0832 00.0832 00.5552

eziS eziS eziS eziS eziS "13.2 "13.2 "13.2 "13.2 "13.2 "57.2 "57.2 "57.2 "57.2 "57.2 "18.2 "18.2 "18.2 "18.2 "18.2 "86.3 "86.3 "86.3 "86.3 "86.3 "18.3 "18.3 "18.3 "18.3 "18.3rebmuNtraP rebmuNtraP rebmuNtraP rebmuNtraP rebmuNtraP 01322D41 05722D41 01822D41 ******** ********

)ten(ecirPtinU )ten(ecirPtinU )ten(ecirPtinU )ten(ecirPtinU )ten(ecirPtinU 00.5552 00.5172 00.5172 00.0933 00.0933

SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS"187.1 "187.1 "187.1 "187.1 "187.1 "18.1 "18.1 "18.1 "18.1 "18.1 "78.1 "78.1 "78.1 "78.1 "78.1 "52.2 "52.2 "52.2 "52.2 "52.2

retemaiDtelloC "708.1 "348.1 "609.1 "182.2tnemtsujdA

htgneL "096.51 "096.51 "096.51 "526.61

htgneLllarevO "052.83 "052.83 "052.83 "573.93

retemaiDkcenhsiF "573.1 "573.1 "573.1 "057.1

"13.2 "13.2 "13.2 "13.2 "13.2 "57.2 "57.2 "57.2 "57.2 "57.2 "18.2 "18.2 "18.2 "18.2 "18.2 "86.3 "86.3 "86.3 "86.3 "86.3 "18.3 "18.3 "18.3 "18.3 "18.3retemaiDtelloC "343.2 "187.2 "348.2 "347.3 "768.3

tnemtsujdAhtgneL "526.61 "521.71 "521.71 "786.22 "786.22

htgneLllarevO "573.93 "734.93 "734.93 "000.34 "000.34

retemaiDkcenhsiF "057.1 "313.2 "313.2 "313.2 "313.2




moc.tni-sloot.www




O-4

“TICFWG” BY-PASSBLANKING PLUG

The “TICFWG” By-Pass BlankingPlug allows fluid to by-pass throughthe side ports when running in thewell. Once the plug is locked in a“TF” type profile, pressure can beheld in either direction. After the wellhas been repaired or tested, the plugcan be equalized and pulled withstandard wireline tools.

(TOP NO GO)

eziS eziS eziS eziS eziS "87.1 "87.1 "87.1 "87.1 "87.1 "18.1 "18.1 "18.1 "18.1 "18.1 "78.1 "78.1 "78.1 "78.1 "78.1rebmuNtraP rebmuNtraP rebmuNtraP rebmuNtraP rebmuNtraP 871GWF41 181GWF41 781GWF41

)teN(ecirPtinU )teN(ecirPtinU )teN(ecirPtinU )teN(ecirPtinU )teN(ecirPtinU 00.5951 00.5951 00.5951

eziS eziS eziS eziS eziS "52.2 "52.2 "52.2 "52.2 "52.2 "13.2 "13.2 "13.2 "13.2 "13.2 "57.2 "57.2 "57.2 "57.2 "57.2 "18.2 "18.2 "18.2 "18.2 "18.2rebmuNtraP rebmuNtraP rebmuNtraP rebmuNtraP rebmuNtraP 522GWF41 132GWF41 ******** ********

)teN(ecirPtinU )teN(ecirPtinU )teN(ecirPtinU )teN(ecirPtinU )teN(ecirPtinU 00.0561 00.0561 00.5571 00.5571


retemaiDoGoN "568.1 "568.1 "609.1 "203.2 "563.2 "208.2 "568.2retemaiDkcenhsiF "573.1 "573.1 "573.1 "057.1 "057.1 "313.2 "313.2

retemaiDkcoL "307.1 "307.1 "307.1 "651.2 "651.2 "656.2 "656.2htgneLllarevO "06.51 "06.51 "06.51 "60.61 "60.61 "96.61 "96.61

looTgninnuR 0020RC14 0020RC14 0020RC14 0520RC14 0520RC14 0030RC14 0030RC14

looTgnilluP 0021BS04 0021BS04 0021BS04002CDJ04ro 0521BS04 0521BS04

052CDJ04ro 0031BS04 0031BS04003CDJ04ro

eborPgnilluP 00210P41 00210P41 00210P41 05210P41 05210P41 00310P41 00310P41

gnir-O 410# 410# 410# 810# 810# 810# 810#

)2(sniPssarB x"61/3"61/51

x"61/3"61/51

x"61/3"61/51

x"4/1"4/11

x"4/1"4/11

x"4/1"4/11

x"4/1"4/11

)2(sgnir-O 110# 110# 110# 311# 311# 311# 311#

gnir-O 011# 011# 011# 511# 511# 511# 511#


“TICW” LOCK (TOP NO GO)

The “TICW” Lock Subassembly is atop no-go lock used in “TF” typeprofiles. It has a no-go shoulderwhich prevents downward movementand two spring loaded locking dogs toprevent upward movement.

eziS eziS eziS eziS eziS "187.1 "187.1 "187.1 "187.1 "187.1 "18.1 "18.1 "18.1 "18.1 "18.1 "78.1 "78.1 "78.1 "78.1 "78.1 "52.2 "52.2 "52.2 "52.2 "52.2 "13.2 "13.2 "13.2 "13.2 "13.2 "57.2 "57.2 "57.2 "57.2 "57.2 "18.2 "18.2 "18.2 "18.2 "18.2rebmuNtraP rebmuNtraP rebmuNtraP rebmuNtraP rebmuNtraP 87100W41 18100W41 78100W41 52200W41 13200W41 ******** ********

)teN(ecirPtinU )teN(ecirPtinU )teN(ecirPtinU )teN(ecirPtinU )teN(ecirPtinU 00.006 00.006 00.006 00.546 00.546 00.037 00.037


retemaiDoGoN "208.1 "568.1 "509.1 "203.2 "563.2 "208.2 "568.2

retemaiDkcenhsiF "573.1 "573.1 "573.1 "057.1 "057.1 "313.2 "313.2

.D.OkcoL "057.1 "057.1 "057.1 "881.2 "881.2 "886.2 "886.2

htgneLllarevO "005.7 "005.7 "005.7 "096.7 "096.7 "052.8 "052.8

retemaiDniPraehS "781. "781. "781. "781. "781. "781. "781.



052CDJ04ro 0031BS04 0031BS04003CDJ04ro


O-6

“TICRZG” BY-PASSBLANKING PLUG

The “TICRZG” By-Pass Blanking Plugallows fluid to by-pass through theside ports when running in the well.Once the plug is locked in a “TR”type profile, pressure can be held ineither direction. After the well hasbeen repaired or tested, the plug canbe equalized and pulled with standardwireline tools.

(BOTTOM NO GO)

eziS eziS eziS eziS eziS "187.1 "187.1 "187.1 "187.1 "187.1 "18.1 "18.1 "18.1 "18.1 "18.1 "78.1 "78.1 "78.1 "78.1 "78.1rebmuNtraP rebmuNtraP rebmuNtraP rebmuNtraP rebmuNtraP 871GZR41 181GZR41 781GZR41


eziS eziS eziS eziS eziS "52.2 "52.2 "52.2 "52.2 "52.2 "13.2 "13.2 "13.2 "13.2 "13.2 "57.2 "57.2 "57.2 "57.2 "57.2 "18.2 "18.2 "18.2 "18.2 "18.2rebmuNtraP rebmuNtraP rebmuNtraP rebmuNtraP rebmuNtraP 522GZR41 132GZR41 ******** ********




htgneLllarevO "06.51 "06.51 "06.51 "06.61 "06.61 "96.61 "96.61niPraehS ssarB"781. ssarB"781. ssarB"781. ssarB"052. ssarB"052. ssarB"052. ssarB"052.



052CDJ04ro 0031BS04 0031BS04003CDJ04ro

eborPgnilluP 00210P41 00210P41 00210P41 05210P41 05210P41 00310P41 00310P41gnir-O 410# 410# 410# 810# 810# 810# 810#

sniPraehSssarB)2(

x"61/3"61/51

x"61/3"61/51

x"61/3"61/51

x"4/1"4/11 "4/11x"4/1 x"4/1

"4/11 "4/11x"4/1

)2(sgnir-O 110# 110# 110# 311# 311# 311# 311#gnir-O 011# 011# 011# 511# 511# 511# 511#


“TICZ” LOCK (BOTTOM NO GO)

The “TICZ” Lock Subassembly is abottom no-go lock used in “TR” typeprofiles. It has two spring loadedlocking dogs that prevent upwardmovement. The no-go shoulder islocated on the packing gland whichno-go’s in the “TR” profile andprevents downward movement.

eziS eziS eziS eziS eziS "87.1 "87.1 "87.1 "87.1 "87.1 "18.1 "18.1 "18.1 "18.1 "18.1 "578.1 "578.1 "578.1 "578.1 "578.1 "52.2 "52.2 "52.2 "52.2 "52.2 "13.2 "13.2 "13.2 "13.2 "13.2 "57.2 "57.2 "57.2 "57.2 "57.2 "18.2 "18.2 "18.2 "18.2 "18.2rebmuNtraP rebmuNtraP rebmuNtraP rebmuNtraP rebmuNtraP 00200Z41 00200Z41 00200Z41 05200Z41 05200Z41 ******** ********

)teN(ecirPtinU )teN(ecirPtinU )teN(ecirPtinU )teN(ecirPtinU )teN(ecirPtinU 00.006 00.006 00.006 00.546 00.546 00.037 00.037


.D.O.xaM "057.1 "057.1 "057.1 "881.2 "881.2 "886.2 "886.2


htgneLllarevO "005.7 "005.7 "005.7 "096.7 "096.7 "052.8 "052.8

retemaiDniPraehS "781. "781. "781. "781. "781. "781. "781.



052CDJ04ro 0031BS04 0031BS04003CDJ04ro


O-8

“TICFSG” BY-PASSBLANKING PLUG(SELECTIVE)

The “TICFSG” By-Pass Blanking Plugallows fluid to by-pass through theside ports when running in the well.Once the plug is locked in a “TF” typeprofile, pressure can be held in eitherdirection. After the well has beenrepaired or tested, the plug can beequalized and pulled with standardwireline tools.

eziS eziS eziS eziS eziS "187.1 "187.1 "187.1 "187.1 "187.1 "18.1 "18.1 "18.1 "18.1 "18.1 "78.1 "78.1 "78.1 "78.1 "78.1rebmuNtraP rebmuNtraP rebmuNtraP rebmuNtraP rebmuNtraP 871GSF41 181GSF41 781GSF41


eziS eziS eziS eziS eziS "52.2 "52.2 "52.2 "52.2 "52.2 "13.2 "13.2 "13.2 "13.2 "13.2 "57.2 "57.2 "57.2 "57.2 "57.2 "18.2 "18.2 "18.2 "18.2 "18.2rebmuNtraP rebmuNtraP rebmuNtraP rebmuNtraP rebmuNtraP 522GSF41 132GSF41 ******** ********



.D.O.xaM "177.1 "208.1 "568.1 "042.2 "203.2 "047.2 "208.2.D.OkcenhsiF "573.1 "573.1 "573.1 "057.1 "057.1 "313.2 "313.2

htgneLllarevO "22.71 "22.71 "22.71 "957.71 "957.71 "609.81 "609.81niPraehS ssarB"781. ssarB"781. ssarB"781. ssarB"052. ssarB"052. ssarB"052. ssarB"052.



052CDJ04ro 0031BS04 0031BS04003CDJ04ro

eborPgnilluP 00200P41 00200P41 00200P41 05200P41 05200P41 00300P41 00300P41gnir-O 410# 410# 410# 810# 810# 810# 810#

raehSssarB)2(sniP

x"61/3"61/51

x"61/3"61/51

x"61/3"61/51

x"4/1"4/11 "4/11x"4/1 x"4/1

"4/11 "4/11x"4/1

)2(sgnir-O 110# 110# 110# 311# 311# 311# 311#gnir-O 011# 011# 011# 511# 511# 511# 511#


“TICS” LOCK (SELECTIVE)

The “TICS” Lock Subassembly is aselective lock. It contains two lockingdogs to prevent upward movementand two locking dogs to preventdownward movement (instead of ano-go shoulder).

eziS eziS eziS eziS eziS "8/32 "8/32 "8/32 "8/32 "8/32 "8/72 "8/72 "8/72 "8/72 "8/72 "2/13 "2/13 "2/13 "2/13 "2/13rebmuNtraP rebmuNtraP rebmuNtraP rebmuNtraP rebmuNtraP 00200S41 05200S41 ********



retemaiD.xaM "057.1 "881.2 "886.2kcenhsiFretemaiD "573.1 "057.1 "313.2

htgneLllarevO "521.9 "573.9 "864.01niPraehS

retemaiD "781. "781. "781.

looTgninnuR 0020RC14 0520RC14 0030RC14knahSgninnuR 0020HS41 0520HS41 0030HS41

looTgnilluP 0021BS04 0521BS04 0031BS04eborPgnilluP 00200P41 05200P41 00300P41

O-10

“TICFB-2” EQUALIZINGCHECK VALVE (TOP NO GO)

Equalizing Check Valves aresometimes called “Standing Valves”because they prevent fluid flow in onedirection (downward) while allowingfull fluid flow in the opposite direction(upward). The “TICFB-2” seats on thetop no-go shoulder of a “TF” typeprofile which prevents downwardmovement. It is not locked into theprofile, and it has a built-in method ofallowing equalizing before pulling.

eziS eziS eziS eziS eziS "87.1 "87.1 "87.1 "87.1 "87.1 "18.1 "18.1 "18.1 "18.1 "18.1 "78.1 "78.1 "78.1 "78.1 "78.1rebmuNtraP rebmuNtraP rebmuNtraP rebmuNtraP rebmuNtraP 8712BF41 1812BF41 7812BF41


eziS eziS eziS eziS eziS "52.2 "52.2 "52.2 "52.2 "52.2 "13.2 "13.2 "13.2 "13.2 "13.2 "57.2 "57.2 "57.2 "57.2 "57.2 "18.2 "18.2 "18.2 "18.2 "18.2rebmuNtraP rebmuNtraP rebmuNtraP rebmuNtraP rebmuNtraP 5222BF41 1322BF41 ******** ********




htgneLllarevO "86.51 "86.51 "86.51 "73.71 "73.71 "18.81 "18.81looTgninnuR 0020RC14 0020RC14 0020RC14 0520RC14 0520RC14 0030RC14 0030RC14


052CDJ04ro 0031BS04 0031BS04003CDJ04ro

gnir-O 721# 721# 721# 331# 331# 331# 331#llaB.S.S "8/11 "8/11 "8/11 "2/11 "2/11 "61/111 "61/111

gnir-O 421# 421# 421# 821# 821# 821# 821#gnir-O 812# 812# 812# 222# 222# 222# 222#

Prices effective June 1, 2012 1-800-338-0308 O-1 1

“TICRB-2” EQUALIZINGCHECK VALVE (BOTTOM NO GO)

Equalizing Check Valves aresometimes called “Standing Valves”because they prevent fluid flow in onedirection (downward) while allowingfull fluid flow in the opposite direction(upward). The “TICRB-2” seats on thetop no-go shoulder of a “TR” typeprofile which prevents downwardmovement. It is not locked into theprofile, and it has a built-in method ofallowing equalizing before pulling.

eziS eziS eziS eziS eziS "87.1 "87.1 "87.1 "87.1 "87.1 "18.1 "18.1 "18.1 "18.1 "18.1 "78.1 "78.1 "78.1 "78.1 "78.1rebmuNtraP rebmuNtraP rebmuNtraP rebmuNtraP rebmuNtraP 8712BR41 1812BR41 7812BR41


eziS eziS eziS eziS eziS "52.2 "52.2 "52.2 "52.2 "52.2 "13.2 "13.2 "13.2 "13.2 "13.2 "57.2 "57.2 "57.2 "57.2 "57.2 "18.2 "18.2 "18.2 "18.2 "18.2rebmuNtraP rebmuNtraP rebmuNtraP rebmuNtraP rebmuNtraP 5222BR41 1322BR41 ******** ********



retemaiDoGoN "177.1 "208.1 "568.1 "042.2 "203.2 "047.2 "208.2


htgneLllarevO "086.51 "086.51 "086.51 "573.71 "573.71 "318.81 "318.81



052CDJ04ro 0031BS04 0031BS04003CDJ04ro

gnir-O 721# 721# 721# 331# 331# 141# 141#

llaB.S.S "8/11 "8/11 "8/11 "2/11 "2/11 "61/111 "61/111

gnir-O 421# 421# 421# 821# 821# 531# 531#

gnir-O 812# 812# 812# 222# 222# 522# 522#

O-12

“TICF” LOCKING MANDREL(TOP NO GO)

The “TICF” Locking Mandrel withpacking gland is a top no-go lockused in “TF” type profiles. This lockhas a no-go shoulder to preventdownward movement and collet typelocking fingers to prevent upwardmovement. The I.D. of the lock has arelatively smooth, uninterrupted flowpath and is excellent for high volumecompletions.

Note: When the packing gland andpacking unit assembly is made up onthe “TICF” Lock, the item becomes a“TM” Lock Packing Sub Assembly.

eziS eziS eziS eziS eziS "57.2 "57.2 "57.2 "57.2 "57.2 "18.2 "18.2 "18.2 "18.2 "18.2)teN(ecirPtinU )teN(ecirPtinU )teN(ecirPtinU )teN(ecirPtinU )teN(ecirPtinU 00.0141 00.0141


SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS"57.2 "57.2 "57.2 "57.2 "57.2 "18.2 "18.2 "18.2 "18.2 "18.2

retemaiDoGoN "208.2 "278.2

retemaiDkcoL "517.2 "517.2

.D.IlerdnaMhctaL "058.1 "058.1

.D.IgniRkcoL "057.1 "057.1

.D.IlerdnaMgnikcaP "005.1 "005.1


.D.IkcenhsiF "13.2 "13.2

looTgnilluP/gninnuR 0031SG04 0031SG04

eborPgnilluP/gninnuR "M""2/13 "M""2/13

daerhTmottoB 2/111-"901.2 2/111-"901.2

"86.3 "86.3 "86.3 "86.3 "86.3 "18.3 "18.3 "18.3 "18.3 "18.3retemaiDoGoN "737.3 "538.3

retemaiDkcoL "526.3 "526.3

.D.IlerdnaMhctaL "057.2 "057.2

.D.IgniRkcoL "526.2 "526.2

.D.IlerdnaMgnikcaP "526.2 "526.2


.D.IkcenhsiF "21.3 "21.3

looTgnilluP/gninnuR 0041SG04 0041SG04

eborPgnilluP/gninnuR "M""2/14 "M""2/14

daerhTmottoB 21-"130.3 21-"130.3


“TICG” LOCKING MANDREL(TOP NO GO)

The “TICG” Lock Mandrel withpacking gland is a top no-go lockused in “TF” type profiles. This lockhas a no-go shoulder to preventdownward movement and collet typelocking fingers to prevent upwardmovement. The I.D. of the lock has arelatively smooth, uninterrupted flowpath and is excellent for high volumecompletions.

Note: When the packing gland andpacking unit assembly is made up onthe “TICG” Lock, the item becomes a“TN” Lock Subassembly.



SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS SNOITACIFICEPS"18.1 "18.1 "18.1 "18.1 "18.1 "78.1 "78.1 "78.1 "78.1 "78.1

retemaiDoGoN "568.1 "529.1

retemaiDkcenhsiF "573.1 "573.1

.D.IkcenhsiF "359. "359.

.D.IregnulP "708. "708.


looTgninnuR 0020RC14 0020RC14

knahSgninnuR 0022HS41 0022HS41

looTgnilluP 0021BS04 0021BS04002CDJ04ro

eborPgnilluP 00220P41 00220P41

daerhTmottoB 41-"864.1 41-"864.1

"52.2 "52.2 "52.2 "52.2 "52.2 "13.2 "13.2 "13.2 "13.2 "13.2retemaiDoGoN "203.2 "563.2

retemaiDkcenhsiF "057.1 "057.1

.D.IkcenhsiF "052.1 "052.1

.D.IregnulP "021.1 "021.1


looTgninnuR 0520RC14 0520RC14

knahSgninnuR 0522HS41 0522HS41

looTgnilluP 0521BS04 0521BS04052CDJ04ro

eborPgnilluP 05220P41 05220P41

daerhTmottoB 41-"208.1 41-"208.1

O-14

“TICFWB” DOWNHOLEINSTRUMENT HANGER

The “TICFWB” Downhole InstrumentHanger is used to land and lockgeophysical instruments in “TF” typeprofiles to allow recording of reservoirdata.

eziS eziS eziS eziS eziS "87.1 "87.1 "87.1 "87.1 "87.1 "18.1 "18.1 "18.1 "18.1 "18.1 "78.1 "78.1 "78.1 "78.1 "78.1 "52.2 "52.2 "52.2 "52.2 "52.2 "13.2 "13.2 "13.2 "13.2 "13.2 "57.2 "57.2 "57.2 "57.2 "57.2 "18.2 "18.2 "18.2 "18.2 "18.2)teN(ecirPtinU )teN(ecirPtinU )teN(ecirPtinU )teN(ecirPtinU )teN(ecirPtinU 00.039 00.039 00.039 00.079 00.079 00.0701 00.0701


retemaiDoGoN "208.1 "568.1 "609.1 "203.2 "563.2 "208.2 "568.2

htgneLllarevO "615.11 "615.11 "615.11 "715.21 "715.21 "704.21 "704.21




052CDJ04ro 0031BS04 0031BS04003CDJ04ro


daerhTmottoB 61-"4/3 61-"4/3 61-"4/3 61-"4/3 61-"4/3 61-"4/3 61-"4/3


“TICRZB” DOWNHOLEINSTRUMENT HANGER

The “TICRZB” Downhole InstrumentHanger is used to land and lockgeophysical instruments in “TR” typeprofiles to allow recording of reservoirdata.



retemaiDoGoN "177.1 "208.1 "568.1 "042.2 "203.2 "047.2 "208.2

htgneLllarevO "615.11 "615.11 "615.11 "715.21 "715.21 "704.21 "390.31




052CDJ04ro 0031BS04 0031BS04003CDJ04ro


daerhTmottoB 61-"4/3 61-"4/3 61-"4/3 61-"4/3 61-"4/3 61-"4/3 61-"4/3

O-16

“TICFSB” DOWNHOLEINSTRUMENT HANGER

The “TICFSB” Downhole InstrumentHanger is used to land and lockgeophysical instruments in “TF” typeprofiles to allow recording of reservoirdata.



retemaiD.xaM "177.1 "208.1 "568.1 "042.2 "203.2 "047.2 "208.2

htgneLllarevO "631.31 "631.31 "631.31 "702.41 "702.41 "726.41 "726.41



knahSgninnuR 0020HS41 0020HS41 0020HS41 0520HS41 0520HS41 0030HS41 0030HS41


052CDJ04ro 0031BS04 0031BS04003CDJ04ro


daerhTmottoB 61-"4/3 61-"4/3 61-"4/3 61-"4/3 61-"4/3 61-"4/3 61-"4/3

1-800-338-0308

INDEX-A-“A” Circulating Plugs, K-3“A” Standing Valves, K-9“A” Packoffs, C-3“A” Probes, J-11“A” Prongs, J-11“A” Shanks, J-11“A” Spear, C-15“A” Tubing Stops, C-28“AK” Kickover Tool, L-8Alligator Grabs, I-41“A-1” Tubing Stops, C-31Anchors (G Stops), C-21Anti-Blow Tool, E-63

-B-“B” Equalizing Subs, B-3“B” Mandrels, A-3“B” Probes, J-13“B” Shifting Tools, G-3Bailers

Drive Down, F-18Hydrostatic, F-21Maxwell Style, F-10Sample, F-25Sand, F-3

Baker Packing, M-4Baker Style Tools

“TICD-2” Shifting Tool, O-2“TICF” Lock, O-12“TICFB-2” Equalizing Check

Valve, O-10“TICFSB” Downhole Instru-

ment Hanger, O-16“TICFSG” By-Pass Blanking

Plug, O-8“TICFWB” Downhole Instru-

ment Hanger, O-14“TICFWG” By-Pass Blanking

Plug, O-4“TICG” Lock, O-13“TICRB-2” Equalizing Check

Valve, O-11“TICRZB” Downhole Instru-

ment Hanger, O-15“TICRZG” By-Pass Blanking

Plug, O-6“TICS” Lock, O-9“TICW” Lock, O-5“TICZ” Lock, O-7

Blind Boxes, E-29Bow Spring Centralizers, E-35Broaches, E-41

-C-“C” Locks, A-5“C” Plugs, B-5“C” Prong, J-14“C-1” Running Tools, H-3Center Spear, E-47Centralizers

Bow Spring, E-35Teflon, E-32Tubing, E-30

Continued...

-I-Impression Blocks, E-40

-J-“J” Running Tools, H-10“JA” Running Tool, H-26“JC-3” Run Tool, H-27“JDC” Pulling Tools, I-13“JDK” Run Tool, H-29“JDS” Pulling Tools, I-15“JK” Running Tool, H-30“JUC” Pulling Tools, I-19“JUS” Pulling Tools, I-21Jars

Knuckle Jars, E-23Oil Jars, E-19Spang Link Jars, E-27Tubular Jars, E-25

-K-“K” Kickover Tools, L-7“K-3” Packoffs, C-9Kickover Tools

“AK”, L-8“K”, L-7“L”, L-3“L2D”, L-5“OK-1”, L-11“OK-5”, L-15“OK-6”, L-21“OM-1”, L-25“OM-5”, L-31“R”, L-35

Knuckle Jars, E-23Knuckle Joints, E-19

-L-“L” Kickover Tool, L-3“L2D” Kickover Tool, L-5Landing Shoe, C-13Line Wiper, D-13Locators

“S”, A-18“T”, A-21

Locking Mandrels“B”, A-3“C”, A-5“D”, A-7“TICF” (Baker Style), O-12“TICG” (Baker Style), O-13“M”, A-9“TICR/TICRN”, A-11“S” , A-16“TICS” (Baker Style), O-9“T” , A-20“W”, A-23“TICW” (Baker Style), O-5“TICX/TICXN”, A-27“TICZ” (Baker Style), O-7

-M-“M” Locks, A-9Magnets, E-57Maxwell Style Sand Bailers, F-10Measuring Line, E-69

-C-Check Set Tools, A-31Circulating Plugs

“A”, K-3“TIC” Packoff, K-6

“W”, K-5Clamps, D-3Collar Stops, C-24Counter Wheels, D-7Counterhead Assembly, D-4Crossover Subs, E-28

-D-“D” Bridge Plugs, B-7“D” Locks, A-7“D” Plugs, B-9“D” Run Tools, H-6, H-9“TICD-2” Shifting Tool, O-2“DB” Running Tools, H-6“DD” Bridge Plug Prongs, J-9“DK” Prongs, J-3“DK-XL” Prongs, J-3“DX” Prongs, J-5Drive Down Bailers, F-18Dual Flapper Check Valve, B-29

-E-Equalizing Subs

“B/H”, B-3“TICR”, B-25“TICX”, B-26

-F-“F” Collar Stops, C-24“TICF” Lock, O-12“TICFB-2” Eq. Check Valve, O-10“TICFSB” Downhole Instrument

Hanger, O-16“TICFSG” By-Pass Blanking Plug, O-8“TICFWB” Downhole Instrument

Hanger, O-14“TICFWG” By-Pass Blanking Plug, O-4Fishing Sockets (GG), I-3

-G-“TICG” Lock, O-13“G” Packoffs,C-7“G” Stops (Anchors), C-21“G” Stop Running Tool, H-13“GA-2” Run Tool, H-26“GG” Fish Sockets, I-3“GR” Adapters, I-5“GS” Pulling Tools, I-7Gauges, E-39Go Devils, E-55Grabs, E-44

-H-“H” Equalizing Subs, B-3“HX” Prongs, J-5Hay Pulleys

16” TIC, D-97” (.092”), D-11

Hydraulic Jars, E-19Hydraulic Packing Nut, D-23Hydrostatic Bailers, F-21

1-800-338-0308

INDEX-S-“S” Locators, A-18“S” Locks, A-16“TICS” Lock (Baker Style), O-9“S” Test Tools, K-15“SB” Pulling Tools, I-33“SS” Pulling Tools, I-33“SM” Pulling Tools, I-35“SSJ” Pulling Tools, I-37Sand Bailers, F-3Sample Bailers, F-25Seating Nipples, K-9Selective Shift Tool, G-9Selective Run Tool, H-15Selective Test Tools, K-17Shifting Tools

“B”, G-3“TICD-2” (Baker Style), O-2Selective, G-9

Shock Absorbers, E-61Sidewall Cutters, E-43Skirted Magnet, E-59Spacer Pipe, C-21Spang Link Jars, E-27Staff Assemblies, D-21Stems, E-15Stuffing Box Packing, M-6Stuffing Boxes

Halliburton Style, D-25Manual, D-19

Swab Cups, M-2Swivel Joints, E-21

-T-“T” Locators, A-21“T” Locks, A-20“T” Test Tool, K-15Tar Babies, E-37Teflon Centralizers, E-32TIC 1-Trip Tubing Plug, C-18“TIC” Packoff, C-16“TIC” Packoff Circulating Plug, K-6Torsion Tester, E-67Tree Connections, D-16Tubing Broaches, E-41Tubing Centralizers, E-30Tubing End Locators, F-28Tubing Stops

“A”, C-28“A-1”, C-31

Tubing Swedges, E-31Tubular Jars, E-25

-U-Unions, D-28

-V-Veeder Root Counters, D-3

-W-“W” Circulating Plug, K-5“TICW” Lock (Baker Style), O-5“W” Mandrels, A-23“W” Running Tools, H-25Wire, E-69Wirefinders, E-50

-P-Pulling Tools

“GS”, I-7“JDC”, I-13“JDS”, I-15“JUC”, I-19“JUS”, I-21“PRS-2”, I-25“RB”, I-29“RJ”, I-29“RS”, I-29“SB”, I-33“SS”, I-33“SM”, I-35“SSJ”, I-37

-Q-“Q” Test Tool, K-12Quick Locks, E-66Quick Unions, D-28

-R-“R” Kickover Tools, L-35“TICR”/”TICRN” Locks, A-11“TICR” Plugs, B-25“TICR” Prongs, J-7“TICR” Run Tools, H-17“RB” Pulling Tools, I-29“TICRB-2” Equalizing Check

Valve, O-11“RJ” Pulling Tools, I-29“RS” Pulling Tools, I-29“TICRZB” Downhole Instrument

Hanger, O-15TICRZG” By-Pass Blanking

Plug, O-6Repinning Tool, I-39Releasing Tool, I-39Right Angle Drives, D-3Roller Stems, E-16Rope Sockets

Brass Wedge, E-13Brass Wedge and Sleeve

Type, E-11Multi-Strand, E-6Multi-Strand Brass Wedge, E-8Single Strand, E-3

Running Tools“A” Tubing Stop, C-28“C-1”, H-3“D”, H-6, H-9“DB”, H-6“F” Collar Stop, C-24“GA-2”, H-26“G Stop”, H-13“J”, H-10“JA”, H-26“JC-3”, H-27“JDK”, H-29“JK”, H-30“P”, H-11“RK-1”, H-31Selective, H-15Sidewall Cutter, E-43“TICR”, H-17“TICX”, H-20“W”, H-25 Continued...

-N-“N” Test Tools, K-11“N-1” Probes, J-13“N-1” Shank, J-13Non-Releasing Tools, I-39

-O-O-rings, M-4“OK-1” Kickover, L-11“OK-5” Kickover, L-15“OK-6” Kickover, L-21“OM-1”Kickover, L-25“OM-5” Kickover, L-31Oil Jars, E-19

-P-“P” Running Tools, H-11“TICPR” Plugs, B-17“TICPX” Plugs, B-20Packing, M-3Packoffs

“A”, C-3“G”, C-7“K-3”, C-9“TIC”, C-16

Paraffin Cutters, E-39Paraffin Scratcher, E-36Plugs

“C”, B-5“D” Bridge Plugs, B-7“D”, B-9“PN”, B-13“PS”, B-15“TICPR”, B-17“TICPX”, B-20“TICR”, B-25“TICX”, B-26“TICXR”, B-27

“Plunk” EquipmentBomb Overshot, N-18Bomb Rope Socket, N-2Hanger-Safety Tool, N-13Hydrochron Releasing and

Setting Tool, N-11Mechanical Release Tool, N-5No Go Subs, N-14Paraffin Tool, N-17Socket and Ball Connector, N-3Soft Release Sub, N-4Whiskered Bomb Hanger, N-6

Pressure Wheels, D-7Probes

“A”, J-11“B”, J-13“N-1”, J-13

Prong Crossover, J-9Prongs

“A”, J-11“C”, J-14“DD” Bridge Plug, J-9“DK”, J-3“DK-XL”, J-3“DX”, J-5“HX”, J-5“P”, J-9“TICR”, J-7“TICX”, J-7

1-800-338-0308

INDEX-W-Wireline Grabs, E-44Wireline Torsion Tester, E-67Wire Retriever, E-53

-X-“TICX” Eq. Subs, B-26“TICX/TICXN” Locks, A-27“TICX” Lock Check Set, A-31“TICX” Plugs, B-26“TICX” Prongs, J-7“TICX” Running Tools, H-20“TICX” Selective Test Tools K-17“TICXR” Pump Through

Plugs, B-27

-Z-“TICZ” Lock (Baker Style), O-7

catalogo tic

Documents

d series landingnipples

nogo ring

b mandrelthe type b

b mandrelassembly

c lockassembly

nogo type locks

choke cup

wireline tools