catalogo biologics

Product Catalog 2010

BioLogics Inc.

The most reliable life science instrumentationfor the highest performance and accuracy

Ultrasonic HomogenizersAntibiotic Potency Testing SystemsAutomated Bacterial Colony Counters

Contents

You will find the following navigation icons throughout the catalog:

To return to the Catalog Contents page, click this icon

To be directed to our Online Shopping Cart, click this icon

Ultrasonic Homogenizers 3

Ultrasonic Homogenizers - Model 150VT & 300VT 4

Ultrasonic Homogenizers - Model 3000 5

Ultrasonic Homogenizers - Small Volume Accessories 6

Ultrasonic Homogenizers - Medium to Large Volume Accessories 7

Ultrasonic Homogenizers - Medium to Large Volume Accessories (continued) 8

Ultrasonic Homogenizers - Cup Tip 9

Ultrasonic Homogenizers - Continuous Flow Chamber 10

Ultrasonic Homogenizers - Sound Abating Chamber 11

OMNICON Potency Testing System 12

OMNICON Zone Reader - 100mm Petri Dishes - Specifications 13

OMNICON Large Plate Zone Reader - 250mm and 340mm Square Plates - Specifications 14

OMNI-Noculator - Automated Peni Cylinder Filler 15

OMNI-Noculator - Automated Peni Cylinder Filler - Specifications 16

Peni Cylinder & Dispensers 17

Manual Peni Cylinder Dispenser 18

Peni Cylinder Dispenser with Hoppper 19

Peni Cylinder Dispenser with Motorized Hopper 20

Peni Cylinders 21

Automated Bacterial Colony Counter 22

Automated Bacterial Colony Counter - Specifications 23

Automated Bacterial Colony Counter - How It Works 24

Ordering and Payment Terms 25

Warranty 26

To be directed to the Online Application Notes or Published

Papers, click this icon

Navigation

www.biologics-inc.com Contents and Navigation 2

Ultrasonic Homogenizers01

www.ultrasonichomogenizer.com Ultrasonic Homogenizers 3

Advanced Instrumentation with Built in High Performance and ConvenienceOur Ultrasonic Homogenizers offer precision engineering with all the features necessary to create a total system for ultrasonic disruption.

It can disintegrate most cells, bacteria, spores or tissue. It can prepare an emulsion down to 1/100 of a micron, homogenize “immiscible” liquids, accelerate enzymatic and chemical reactions, stimulate bacterial activity, disperse solids in liquids and degas liquids.

How it WorksThe ultrasonic power supply transforms line voltage to high frequency 20 kHz of electrical energy. This electrical energy is transmitted to the probe, where it is changed to mechanical energy. The vibrations from the probe are coupled to, and intensified, by the titanium tip. The probe vibrates in a longitudinal direction, and transmits this motion to the titanium tip immersed in the solution. Cavitation results, in which microscopic vapor bubbles are formed momentarily and implode, causing powerful infinitesimal shock waves to radiate throughout the solution in proximity to the radiating face of the tip.

Automatic TuningOur Ultrasonic Homogenizers employ a proprietary feedback system, insuring that the Ultrasonic Homogenizer is always working at its maximum efficiency regardless of the application. There is no need for constant adjustment by the operator. The percentage of ultrasonic power emitted is indicated by the output meter, enabling accurate, reproducible results.

PerformanceThe ultrasonic generators provide continuous duty operation on difficult or large scale applications.

Model 300VT

Ultrasonic HomogenizersModel 150VT and Model 300VT

Model 150VT

0-121-0001 115 Volts/60Hz

Power Output 0 - 150 WATTSOutput Frequency 20k Hz

CATALOG NO. VOLTAGE

FEATURES

Automatic Tuning Yes

Duty Cycle (Pulsing) 10 - 90%Timer 1 - 15 minutesDisplay LEDSound Abating Chamber Optional

Generator 12.0 in W x 10.0 in D x 4.0 in H DIMENSIONS

Transducer 3.5 in Dia. x 4.0 in L 30.5 cm W x 25.4 cm D x 10.2 cm H

8.9 cm Dia. x 10.2 cm L

0-122-0001 115 Volts/60Hz


CATALOG NO. VOLTAGE

FEATURES


Duty Cycle (Pulsing) 10 - 90%Timer 1 - 15 minutesDisplay LEDSound Abating Chamber Optional



8.9 cm Dia. x 10.2 cm L

0-121-0002 230 Volts/50Hz

0-122-0002 230 Volts/50Hz

Microprocessor Control N/A


* Shown with optional 5/32” (3.9mm) diameter titanium stepped micro tip

* Shown with optional 1/2” (12.7mm) diameter solid titanium tip

* Titanium tips purchased separately



http://www.ultrasonichomogenizer.com/index.php?l=product_list&c=1

http://www.ultrasonichomogenizer.com/index.php?l=page_view&p=ultrasonic_homogenizer_application_notes&menu=ultrasonic_homogenizer



Ultrasonic HomogenizersModel 3000

0-127-0001 115 Volts/60Hz


CATALOG NO. VOLTAGE

FEATURES


Duty Cycle (Pulsing) 10 - 90%Timer 1 - 15 minutesMeter Type LEDSound Abating Chamber Integrated



8.9 cm Dia. x 10.2 cm L

0-127-0002 230 Volts/50Hz


* Shown with optional 1/2” (12.7mm) diameter solid titanium tip



Model 3000



Ultrasonic HomogenizersSmall Volume Accessories

TIP DIAMETER 5/32” (3.8 mm)CATALOG NO. 0-120-0005

PROCESSING VOL. 300 µl - 15 mlINTENSITY VERY HIGHAMPLITUDE 225 µmTYPE STEPPED

* 2 PIECE DESIGN AND MUST BE USED IN CONJUNCTION WITH THE 1/2” DIA. TAPPED TIP, CAT NO. 0-120-0010

1/8” (3.2 mm) DIA. TAPERED MICRO TIP SHOWN ATTACHED TO 1/2” (12.7 MM) DIA. TAPPED TIP


Titanium Micro Tips (Micro Horns)

TIP DIAMETER 1/8” (3.1 mm) 3/16” (4.8 mm)CATALOG NO. 0-120-0007* 0-120-0008*

PROCESSING VOL. 500 µl - 10 ml 750 µl - 25 mlINTENSITY VERY HIGH HIGHAMPLITUDE 240 µm 200 µmTYPE TAPERED TAPERED



TIP DIAMETER 3/8” (9.2 mm) 1/2” (12.7 mm) 1/2” (12.7 mm)CATALOG NO. 0-120-0009 0-120-0010* 0-120-0011

PROCESSING VOL. 5 ml - 200 ml 10 ml - 300 ml 10 ml - 300 mlINTENSITY HIGH MEDIUM HIGH MEDIUM HIGHAMPLITUDE 170 µm 140 µm 140 µmTYPE SOLID TAPPED SOLID

Ultrasonic HomogenizersMedium to Large Volume Accessories

The terms Tip and Horn are interchangeable. Typically, as the Tip diameter decreases, the intensity or amplitude of the radiating face increases as does the overall length.

* INCLUDES 1 TITANIUM REPLACEABLE FLAT TIP

Sold TipsSolid Tips are machined from a single piece of Titanium and are preferred when processing liquids with high surface tension. In addition, Solid Tips are generally less likely to cause sample cross contaminations.


Titanium Standard Tips (Horns)

Tapped TipsAll Tapped Tips include 1 Titanium Replacement Flat Tip. Flat Tips should be replaced when they show signs of excessive “pitting” and intensity/performance is greatly decreased.

TIP DIAMETER 3/4”(19.1 mm) 3/4”(19.1 mm)CATALOG NO. 0-120-0012* 0-120-0013

PROCESSING VOL. 25 ml - 600 ml 25 ml - 600 mlINTENSITY MEDIUM MEDIUMAMPLITUDE 70 µm 70 µmTYPE TAPPED SOLID

TIP DIAMETER 1”(25.4 mm) 1”(25.4 mm)CATALOG NO. 0-120-0014* 0-120-0015

PROCESSING VOL. 50 ml - 1000 ml 50 ml - 1000 mlINTENSITY LOW LOWAMPLITUDE 40 µm 40 µmTYPE TAPPED SOLID




Ultrasonic HomogenizersMedium to Large Volume Accessories (continued)

3/4” (19.1 mm) DIA. REPLACEMENT FLAT TIP SHOWN ATTACHED TO 3/4” (19.1 mm) DIA. TAPPED TIP


Titanium Replacement Flat Tips

TIP DIAMETER 1/2” (12.7 mm) 3/4” (19.1 mm) 1” (25.4 mm)CATALOG NO. 0-120-0016 0-120-0017 0-120-0018


Ultrasonic HomogenizersCup Tips and Accessories

If cooling is required with heat sensitive samples, cold water can be fed through the Cup Tip using the provided barbed fittings. The Cup Tip can also be used without the cooling feature by simply using the provided port plugs in place of the barbed fittings.

250 ml CUP TIP AND 8 POSITION MICRO TUBE TRAY SHOWN ATTACHED TO TRANSDUCER ASSEMBLY


The Titanium Cup Tips provide an easy way to process samples without direct exposure to the homogenizer tip, avoiding cross contamination.

Titanium Cup Tips can simultaneously process sealed vial, test tubes or micro tubes with identical parameters.

Titanium Cup Tips

Micro Tube Tray Holders

TIP DIAMETER 1 1/2” (38.1 mm) 2” (50.8 mm)CATALOG NO. 0-120-0019* 0-120-0020*

PROCESSING VOL. 250 ml 2000 mlINTENSITY MEDIUM LOW

NO. OF TUBES 8 20CATALOG NO. 0-120-0019 0-120-0020

* MUST BE POWERED BY THE MODEL 300VT OR 3000 ONLY



Ultrasonic HomogenizersContinuous Flow Chamber

This chamber permits continuous processing of liquids, and is designed for emulsifying and homogenizing applications. The continuous flow chamber may be sealed in a closed system when mounted, so that infectious materials can be used. It is equipped with a water flow-through cooling jacket to enable the temperature of the processed solution to be maintained at a desired level.

Continuous Flow Chamber shown with 3/4” Dia. Solid Titanium Tip and Transducer assembly.

2 CoolingJacket Ports

3 Sample Port


Continuous Flow ChamberCATALOG NO. 0-120-0026*

* REQUIRES THE 3/4” (19.1 mm) DIAMETER SOLID TITANIUM TIP CATALOG NO. 0-120-0013


Ultrasonic HomogenizersSONABOX Sound Abating Chamber

TransducerCompartment

AdjustableSample Table

The SONABOX reduces cavitational sound emitted during processing when used in conjunction with the Model 150VT and 300 VT Ultrasonic Homogenizer. These harmonics are produced by the vessel walls and fluid surface, and can be disturbing with extended operation. The clear acrylic door permits viewing of the sample while protecting the operator against accidental splashing. An access port for tubing is also provided for use with the accessory cooling jacket or continuous flow chamber.

TransparentSample Door


SONABOX Sound Abating ChamberCATALOG NO. 0-125-0001

SONABOX


OMNICON® Antibiotic Potency Testing02

www.omniconzonereader.com OMNICON Antibiotic Pentency Tesing 12

Now you can get fast, reproducible, quantitative results while you automate one of the most time consuming, tedious tasks in your lab. Put an OMNICON® Zone Reader system to work for you.

No matter what your volume of zones assays, no matter what your budget, either of the OMNICON® Zone Reader systems will suit your needs.

The OMNICON® Zone Reader systems integrates image analysis, comparison and reporting to provide accurate results in record time.

The OMNICON Zone Reader performs the following multi-plate assays (100 mm round petri dish):• United States Pharmacopeia (USP) Method• British Pharmacopeia (BP)/European Pharmacopeia (EP) Method• Japanese Pharmcopeia Method (JP)

The OMNICON Large Plate Zone Reader performs the following latin square assays (240 mm or 355 mm square dish):• British Pharmacopeia (BP) Method• European Pharmacopeia (EP) Method

All OMNICON® Zones of Inhibition software are 21 CFR, Part 11, Electronic Records and Signature compliant, providing three levels of security, audit trails, and data file protection.

The OMNICON® Zone of Inhibition software is easy to use and includes these features:• calculations performed automatically• predefined and user defined assay/product protocols• user defined reports and graphs• Outlier test

The OMNICON® Zone Reader systems are affordable. It is a solid investment that will quickly pay off with improved efficiency, accuracy and increased productivity.

There is no better, faster, or more economical way to analyze antibiotic potency than the OMNICON® Zone Reader systems

OMNICON® Antibiotic Potency TestingMulti Plate Assay - 100 mm Petri Dishes

0-131-0001 115 Volts/60Hz

Software Environment Windows™Pharmacopeia Methods US, EP/BP, JP and 2+2

CATALOG NO. VOLTAGE

FEATURES

CFR Part 11, ERS CompliantPlate Size 100 mm Round Petri DishPC Integrated - Intel Dual CoreIllumination Reflected and transmittedCamera High resolution B/W

Main Unit 10.0 in W x 24.0 in D x 14.0 in H DIMENSIONS

25.4 cm W x 60.9 cm D x 35.6 cm H

0-131-0002 230 Volts/50Hz


OMNICON Zone Reader - 100mm Round Petri Dishes

Measuring zone diameters on 100 mm round petri dishes has never been easier. Using the OMNICON Zone Reader you can get fast reproducible, quantitative antibiotic potency results while automating one of the most time-consuming, tedious tasks in your lab.

The software enables automatic zone diameter measuring, applies the USP Outlier Test or Gap Test, performs all calculation based on percent label claim or weight and dilution.

Regardless of the agar diffusion method being used, Peni Cylinders, cut wells or paper disc, the OMNICON Zone Reader analyzes them all effortlessly. The OMNICON Zones of Inhibition software is 21 CFR Part 11 Electronic Records and Signature compliant, and provides three levels of security, encrypted data files and comprehensive audit trails.

0-132-0001 115 Volts/60Hz

Software Environment Windows™Pharmacopeia Methods EP/BP

CATALOG NO. VOLTAGE

FEATURES

CFR Part 11, ERS CompliantPlate Size 240 mm or 355 mm Square

PC Integrated - Intel Dual CoreIllumination Transmitted or ReflectedCamera High resolution B/W


25.4 cm W x 60.9 cm D x 35.6 cm H

0-132-0002 230 Volts/50Hz

Stage Automatic motorized


OMNICON® Antibiotic Potency TestingLarge Plate - Latin Square

OMNICON Large Plate Zone Reader - 240 mm or 355mm Square Dishes

The OMNICON Large Plate Zone Reader integrates image analysis, automatic stage, comparison and reporting to provide accurate results in record time.

The automatic motorized scanning stage can accommodate either a 240 mm or 355 mm square dish.

The OMNICON Large Plate Zones Reader can measure all zones on a 240 mm square plate, calculate results, display and print results in 2-3 minutes.

The Large Plate OMNICON Zones of Inhibition software is 21 CFR Part 11 Electronic Records and Signature compliant, and provides three levels of security, encrypted data files and comprehensive audit trails.

OMNI-Noculator Peni Cylinder Filler03

www.omniconzonereader.com OMNI-Noculator Peni Cylinder Filler 15

The OMNI-Noculator is a robotic liquid handling system designed to fill Peni Cylinders with the corresponding antibiotic sample.

The analyst defines the Pharmacopeia method (USP, EP/BP, or JP), the number of plates to replicate or number of plates within the assay, selects one of several dispense patterns, and the volume of antibiotic sample to dispense into the Peni Cylinder.

www.omniconzonereader.com OMNI-Noculator Peni Cylinder Filler 16

OMNI-NocualtorAutomated Peni Cylinder Filler

0-134-0001 115 Volts/60Hz

Operating Environment Microprocessor ControlledDisplay Color LCD

CATALOG NO. VOLTAGE

FEATURES

Pharmacopeia Methods USP, EP/BP, and JPDispense Patterns 1 to 3 for each method

Pipette Volume 1000µlDispenser Volume 200µl to 290µlPlate Size 100 mm Round Petri Dish


71.1 cm W x 60.9 cm D x 48.3 cm H

0-134-0002 230 Volts/50Hz

Pump Type Syringe

OMNI-Noculator

Peni Cylindersand Dispensers04

www.omniconzonereader.com Peni Cylinders and Dispensers 17

For speed and accuracy in antibiotic potency testing by agar diffusion, nothing is more efficient in your microbiology laboratory than the Peni Cylinder Dispenser. Our Peni Cylinder Dispensers save time by automating the tedious task of manually placing Peni Cylinders into a 100 mm petri dish.

All internal components are manufactured using Stainless Steel, for ease of chemical sterilization. Both Hopper configurations of the Peni Cylinder Dispenser use internally lubricated bearings and therefore, autoclave sterilization is not recommended. This will damage the bearings.

A Manual Dispenser is available where Peni Cylinders are manually fed into an 18” long Feeder Rod. When ordering the Manual Dispenser, specify the number of Feeder Rods needed for your application.

The Manual Dispenser unit can be easily converted to either a Manual Hopper or a Motorized Hopper. All Dispensers can be modified to use either plastic or glass petri dishes.

0-144-0001 Manual Peni Cylinder DispenserCATALOG NO.


Peni Cylinder DispenserManual

Manual Peni Cylinder Dispenser

The Peni Cylinder Dispenser with a manual Hopper holds more than 400 Peni Cylinders, and eliminates the need for Feeder Rods. The Peni Cylinders are loaded into the Hopper and the necessary number of Peni Cylinders are automatically and accurately dropped on the petri dish with the pull of a lever and a few spins of the Hopper.

0-144-0002 Peni Cylinder Dispenser with manual Hopper

CATALOG NO.


Peni Cylinder DispenserHopper and Motorized Hopper

Peni Cylinder Dispenser with Manual Hopper

0-144-0003 Peni Cylinder Dispenser with Motorized Hopper

CATALOG NO.


Peni Cylinder DispenserHopper and Motorized Hopper

The Peni Cylinder Dispenser with a motorized Hopper continuously rotates the Hopper, providing the configured number of Peni Cylinders onto the Petri Dish with a pull of the lever.

Peni Cylinder Dispenser with Motorized Hopper

Peni Cylinders are manufactured from Stainless Steel and comply with USP/CFR requirements.

0-144-0005 Flat Face Peni Cylinder 8 mm OD x 6 mm ID x 10 mm Long

CATALOG NO.

0-144-0006 Chamfered Face Peni Cylinders 8 mm OD x 6 mm ID x 10 mm Long

CATALOG NO.


Peni CylindersFlat and Chamfered Face

Flat Face Peni Cylinder

Chamfered Face Peni Cylinder

AutomatedColony Counter05

www.biologics-inc.com Automated Colony Counters 22

Many biological procedures depend on an accurate count of the bacterial colonies and other organisms. The enumeration of such colonies is a slow, tedious task. When counts are made by more than one technician, wide variations are often noted. Various attempts have been made to speed up the process and to improve counting precision.

With the development of the BioLogics family of counter/analyzers, significant engineering advancements have been made to provide greater potential for accuracy and precision in a wide range of colony counting applications. Among the technological improvements that have enhanced accuracy and precision are: 1) Significant increase in sensitivity to detect smaller colonies in low contrast media; and 2) more sophisticated and expanded illumination systems to increase the range of visibility and broaden the scope of applications.

To a large extent, accurate colony counting depends on the ability to “see” colonies distinctly, whether viewed by the naked eye, or by an automated instrument. Colony morphology is largely a result of the characteristics of the growth media and other environmental conditions. To enhance visibility of colonies and enhance the counting accuracy in an even broader range of applications, it is good practice to employ those procedures that form colonies that are readily discernible by their improved size, shape, distribution and contrast.

The AccuCount series automated counters have outstanding sensitivity and resolution, permitting counting of a wide range of object types and sizes, including bacterial colonies, cells, industrial particles, etc.

Objects can be virtually any shape. Clearly defined or hazy. Dark or light. As long as there is a detectable difference in the light contrast levels of the object and the background, and at least 0.1 mm of separation between objects, the AccuCount series counters will provide accurate counts.

The detection feature insures optimum precision with a visual indicator. The unique flagging system places an illuminated dot in the upper left-hand corner of each scanned object. The operator sees exactly what objects are being analyzed.

The adjustable aperture allows the operator to isolate an object or group of objects for separate counting.

Simple adjustments of the size discrimination dial eliminate objects that are smaller than the determined size threshold.

Objects and their backgrounds vary widely, therefore, the operator can select from three methods of illumination to enhance visibility and increase accuracy. 1) Transmitted - for routine objects of high contrast with relatively transparent backgrounds. 2) Reflected - for objects with high contrast with opaque backgrounds. 3) Darkfield - for objects with low contrast with relatively transparent backgrounds.

115 Volts/60Hz 0-101-0001 0-102-0001

Internal Video Camera Yes NoExternal Video Camera No Yes

without RS2323 CATALOG NO. CATALOG NO.

FEATURES

POS/NEG Image Function Yes YesIllumination - Transmitted/Reflected Yes N/AOperation Mode Count CountAperture Type Circular CircularAperture Positioning Yes YesSensitivity Control Semi-Automatic Semi-Automatic

Main Unit 9.3 in W x 16.0 in D x 11.2 in H 9.3 in W x 15.5 in D x 6.0 in H DIMENSIONS

23.6 cm W x 40.6 cm D x 28.1 cm H 23.6 cm W x 39.4 cm D x 15.2 cm H

230 Volts/50Hz 0-101-0002 0-102-0002

115 Volts/60Hz 0-101-0003 0-102-0003with RS2323 CATALOG NO. CATALOG NO.

230 Volts/50Hz 0-101-0004 0-102-0004

Object Detection Type Edge EdgeStacking Ring Compensation 17% Fixed 17% FixedSize Discrimination Manual ManualMinimum Size Detected 0.2 mm Dia. Based on ObjectiveCount Accuracy +/- 2% of TV Raster Width +/- 2% of TV Raster Width

AccuCount 1000 AccuCount 2000(Shown with optional Microscope)

Monitor 11.7 in W x 10.4 in D x 8.9 in H 11.7 in W x 10.4 in D x 8.9 in H 29.7 cm W x 26.5 cm D x 22.7 cm H 29.7 cm W x 26.5 cm D x 22.7 cm H


Automated Colony CountersAccuCount 1000 and AccuCount 2000

http://www.biologics-inc.com/mofcart/catalog_colony_counters_pg1.htm

http://www.biologics-inc.com/colony_counter_papers_page1.htm

Object RecognitionThe CCD video camera functions as a scanning light detector. The electronic beam moves across the dish in a series of horizontally adjacent lines, generating a continuous electronic video signal.

The video signal is compared with the preset sensitivity and size thresholds established initially by the operator. These thresholds are controlled by the sensitivity and colony size adjustments. When the thresholds are exceeded, a pulse is generated by each colony. Therefore, the smaller particles and debris which are below the threshold are not detected. After the entire dish is scanned, and the total number of signals exceeding the threshold is shown on the LED display. To compensate for any colonies masked in the stacking ring area of the plate, and those which may overlap, the operator may choose to compensate the count by applying an electronic compensation factor.

Counting ResolutionThe CCD video camera in effect “sees” only one object at a time as it scans across and down the entire illumination area. The minimum object size that can be detected is related to the object diameter, optical magnification, and the number of lines in the scanning pattern. The scanning lines are controlled by the CCD video camera and it electronic circuitry. The minimum object size that can be detected also depends upon the contrast between the object and the background.

A minimum contrast level of 20% is required to accurately count objects 0.2 mm in diameter. As higher contrast levels are achieved, a minimum object size of 0.1 mm in diameter can be counted.

Closely spaced, clustered, or overlapping objects may be counted as multiple or single units, depending on the orientation of the objects to the scan line (see Fig. 1). In general, such conditions are effectively overcome by employing the compensation factor within the instrument. Another technique is to rotate the subject which contains the objects, recording the average of a few counts at different object orientations. Optional lenses are available to optically magnify the objects by a factor of two, allowing their detection at about one-half of the normal size and spacing requirements.

ApertureA very simple rapid adjustment at the start of the counting operation is used to establish the size and position of the scanning area. The entire subject may be viewed , but the area that is counted is segmented by the electronic aperture . The aperture is calibrated in square millimeters in the event a statistical comparison of different size areas may be needed. The aperture is viewed on the video monitor and appears as a brighter area superimposed over the subject being counted.

0.2 mm

COUNTS ASONE OBJECTS

COUNTS ASTWO OBJECTS

520 TVLines


Automated Colony CountersHow it Works

Ordering, Pricesand Payment06

www.biologics-inc.com Ordering, Prices and Payment 25

To OrderBioLogics Customer Service representatives receive orders Monday through Friday, from 8:00 AM to 5:00 PM Eastern Standard Time. To place an order call: • phone number 703-367-9020, option 1 • fax number 703-367-9024 • e-mail [email protected]

When ordering, please specify the following: 1. Your Customer Number 2. Your Purchase Order Number 3. Catalog Number 4. Product Description 5. Quantity 6. Requested Ship Date

Written confirmation of telephone orders is not required. If written confirmation is sent, it must be clearly marked as CONFIRMED since duplicate order can not be returned for credit.

Shipment MethodProducts will normally be shipped upon receipt of order. Shipment methods include common carriers, mail, or air freight. Orders placed before 3:00 PM Eastern Time will be shipped the same day.

Return ShipmentsDo not return any Product(s) without the Return Material Authorization (RMA) number provided by BioLogics Customer Service representative. UNAUTHORIZED RETURNS CANNOT BE ACCEPTED AND WILL BE RETURNED AT SENDER’S EXPENSE. Mistakes in ordering should be reported promptly. Any returns accepted due to the fault of the purchaser will be subject to a 30% restocking fee. Products made to order will not be authorized for return except when the Product has been proven to be defective or a shipping error has been made.

For products damaged during shipping or received in unsatisfactory condition, the carrier must note the condition on the delivery receipt and BioLogics must be notified within 48 hours. Damaged Product(s) must be retained for inspection by carrier.

Terms and ConditionsTerms of payment are 2% 10, Net 30 days with approved credit. All shipments are F.O.B. shipping point (Manassas, Virginia, USA). Shipping charges, insurance and applicable taxes are at the purchaser’s expense, and will be prepaid and added to the invoice. All prices are subject to change without notice.

Bids and QuotationsRequests for price quotations can be sent to: • By phone: 703-367-9020, option 1 • By fax: 703-367-9024 • By mail: BioLogics, Inc. 9024H Euclid Avenue Manassas, Virginia 20110 USA

PricesThe prices, specifications, and accessories contained in this catalog were in effect at the time this publication was approved for printing. BioLogics, whose policy is one of continuous improvement and innovation, reserves the absolute right to discontinue models and accessories, and to change the design or price(s) without notice, and without incurring obligation.

Prices are based on the BioLogics Price Policy. That policy is current at the time of shipment. Prices and taxes are subject to change without notice. We recommend you confirm prices when placing your order.

Payment MethodIn addition to payment by check, we accept VISA, Master Card , American Express and Electronic Fund Transfer (EFT) payments.

Warranty07

www.biologics-inc.com Warranty 26

All products manufactured by BioLogics, Inc. are warranted to the purchaser to be free of defects caused by faulty materials of workmanship as follows: defective parts and materials will be replaced, or at the election of BioLogics, repaired at no charge for a period of one (1) year from the date of sale, and the labor required for such replacement or repair will be provided by BioLogics at no charge for a period of six (6) months from the date of sale. BioLogics’ liability under this warranty is restricted to replacing, repairing, or issuing credit (at BioLogics’ option) for any BioLogics product found to be defective within the warranty period stated above. Defective products shall be returned to the place of manufacture, with shipping charges prepaid by the Purchaser. BioLogics shall make a reasonable determination as to the existence or cause of any alleged defect and warranty eligibility upon the return of the defective product. The foregoing warranty shall not be valid if 1) BioLogics is not promptly notified in writing of a defect within fifteen (15) days after the defect is noted or 2) if the product has been subjected to abuse, misuse, accident, alteration, neglect, unauthorized repair or installation.

THE FOREGOING WARRANTY IS MADE EXPRESSLY IN LIEU OF ANY AND ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY AND ANY WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, AND ANY OTHER OBLIGATIONS OR LIABILITY ON THE PART OF BIOLOGICS, INC. (THE SELLER). IN NO EVENT, INCLUDING THE CASE OF A CLAIM OF NEGLIGENCE, SHALL BIOLOGICS BE LIABLE FOR INCIDENTAL AND/OR CONSEQUENTIAL DAMAGES.

When an instrument is required to be installed by a BioLogics engineer, technician or sales representative, the period of this Warranty shall begin on the date of such installation provided that any use of the instrument prior to such installation shall, at the sole election of BioLogics, void this Warranty. When installation by BioLogics’ personnel is not required, the period of this Warranty shall begin as described above. Whether or not the instrument has been installed or shipped pursuant to a purchase order, and any trial period shall be deducted from the Warranty period that would otherwise apply under a subsequently placed purchase order for that instrument.

catalogo biologics

Documents

ultrasonic disruption

percentage of ultrasonic

iconultrasonic homogenizers

peni cylinder dispensers

manual peni cylinder

peni cylinders

bacterial activity

large volume accessories