catalogo 2012 inglese

AGRICULTURAL & FORESTAL MACHINERY

2011 SEPTEMBER

HOW TO REACH USBY CAR from Udine: enter the A23 motorway and take the Venice exit onto the A4 (following signs for Venezia); exit at Portogruaro and take the A28 to Conegliano Veneto; take the main road SS 13, heading towards Treviso and, after about 2.5 km, follow the signs for Pieve di Soligo.

from Venice: enter the A27 motorway, heading towards Belluno, and exit at Conegliano Veneto; take the main road SS 13, heading towards Treviso and, after about 2.5 km, follow the signs for Pieve di Soligo.

from Trento: follow the main road SS 47 "Strada della Valsugana" (following signs for Padova) as far as Primolano; take the main road SS 50 bis, heading towards Feltre/Treviso, as far as Fener; from here, head towards Valdobbiadene and follow the signs for Conegliano Veneto until you reach Pieve di Soligo.

from Milan: enter the A4 motorway, heading towards Venice (signs for Venezia); then take the A27 towards Belluno and exit at Conegliano Veneto; take the main road SS 13, heading towards Treviso and, after about 2.5 km, follow the signs for Pieve di Soligo.

VENICE

TRENTO

TREVISO

PIEVEDI SOLIGO

CONEGLIANOVENETO

UDINE

TRIESTE

BOLZANO

PADUA

MILAN

BOLOGNA

VERONA

Company.We have been designing and manufacturing farm trailers for

over sixty years and have now specialized in the design and

manufacture of forestry equipment.

Our experience is the product of constant hard work, carried

out with passion and determination.

We started off with four-wheeled farm trailers, then

focussed on drive axle trailers for use in mountain regions

and, lastly, supplemented our range with forestry trailers,

log splitters and forestry winches.

Innovation and reliability are the core values behind each

new project we undertake. We strive to build a 2-way

relationship with our customers, enabling us to offer and

receive new ideas with a view to improving the performance

of our products and, consequently, optimize the work of

farmers and forestry operators.

www.bernardimacchine.it

Reprint December 2011Le prestazioni sono indicative e dipendono dall’applicazione pratica. Modelli e dati possono essere modificati senza preavviso.Nelle immagini possono essere rappresentati anche accessori non compresi nel prezzo base.

Performance is approximate and depends on its actual operating conditions. Models and data are subject to modifications without prior notice.Picture may show optional accessories too.

Toute prestation est indicative et dépend de l’application pratique.Les modèles et les spécifications pourront être modifiés sans préavis. Les accessoires des illustrations ne sont pas toujours inclus dans les prix de base.

Die Leistungsangaben sind unverbindlich. Konstruktionsänderungen ohne Voravis bleiben vorbehalten. Aus den Schnitzeichnungen können Zubehörteile ersichtlich sein, die im Gerätepreis nicht mit inbegriffen sind.

Over sixty years of quality.

6 FARM TRAILERS

20 FORESTRY TRAILERS

37 SYNKRO HYDRAULIC DRIVE

42 "Z" SERIES FORESTRY LOADERS

52 "L" SERIES FORESTRY LOADERS

58 HYDRAULIC GRAPPLES AND ROTATORS

60 C3-POINT HITCH TRANSPORT BOX ATTACHMENTS

61 3-POINT HITCH GRAPPLE

62 FORESTRY WINCHES

74 LOG SPLITTERS

80 HYDRAULIC LIFT

www.bernardimacchine.it

SINGLE-AXLE 3-WAY TIPPER FARM TRAILERSINGLE-AXLE REAR-TIPPER FARM TRAILERS

6 FARM TRAILERS - www.bernardimacchine.it

TYPE SIZES (cm) WHEELS TOW EYE LOAD (kg) TOTAL CAPACITY (kg) TARE (kg) PRICE

STANDARD AXLE

B 21 P 225x140x30 205/70-15 330 2100 430 €

DRIVE AXLE

B 21 PM 225x140x30 205/70-15retreaded 345 2100 480 €

EXTRA CHARGE FOR GEARBOX ON DRIVE AXLE

WITH REVERSING GEAR for anticlockwise tractor PTO €

FOR TRACTORS with synchronized PTO higher than 180 rpm over 20 m ASK FOR QUOTE


MANUAL TIPPING

B 15 P 200x138x30 185/65-14 190 1500 280 €

HYDRAULIC TIPPING WITH DOUBLE-ACTING CYLINDER

B 15 P 200x138x30 185/65-14 190 1500 280 €

EXTRA CHARGE FOR SIDE EXTENSIONS

side extensions kit 200x138x30 €

tool box

bolt on front panel

lighting

grease nippleon rear tube

parking brake lever

removable parking jack


reclining lightingdouble-acting cylinder for hydraulic tipping

safety stay

safety stay

height- adjustable tow eye

hot-dip galvanized sides


side winches 1 RH + 1 LH

two coats of paint

adaptable/adjustabletractor brake lever

STANDARD EQUIPMENThydraulic tipping using tractor oil, smooth sheet metal bed, safety stay for bed, hot-dip galvanized sides, side extension fittings, parking jack, lighting, height-adjustable tow eye, mechanical brake, tool box complete with wheel chocks and 2 ratchet straps (except B15 P), quick coupler support. PTO shaft for powered trailer. Accessories see pages 14 -15 - 16- 17.

SINGLE-AXLE 3-WAY TIPPER FARM TRAILER

7www.bernardimacchine.it - FARM TRAILERS


STANDARD AXLE

B 21 225x140x30 205/70-15 345 2100 450 €

DRIVE AXLE

B 21 M 225x140x30 205/70-15retreaded 335 2100 490 €





lighting board

two coats of paint

parking jack support

travel limit valve for tipper

body anti-bending system grease nipple on rear tube

tool box

STANDARD EQUIPMENThydraulic tipping using tractor oil, travel limit valve, smooth sheet metal bed, safety stay for bed, hot-dip galvanized sides, side extension fittings, parking jack, lighting board, height-adjustable tow eye, mechanical brake, tool box complete with wheel chocks and 2 ratchet straps, quick coupler support. PTO shaft for powered trailer. Accessories see pages 14 -15 6- 17.

height-adjustable tow eye


FARM TRAILERS - www.bernardimacchine.it8

SINGLE-AXLE HYDRAULIC 3-WAY TIPPER FARM TRAILERS SINGLE-AXLE HYDRAULIC REAR-TIPPER FARM TRAILERS

STANDARD EQUIPMENThydraulic tipping using tractor oil, smooth sheet metal bed, safety stay for bed, hot-dip galvanized sides with rear stanchions, side extension fittings, parking jack, lighting, height-adjustable tow eye, mechanical brake, tool box complete with wheel chocks and 2 ratchet straps, quick coupler support. PTO shaft for powered trailer. Accessories see pages 14 -15 - 16- 17.

tool box

bolt on front panel

lighting

grease nipple on rear tube


safety stay



two coats of paint

adaptable/adjustable tractor brake lever

rear stanchionswith top and bottom hinged panelopening


B 23 PM


STANDARD AXLE

B 23 P 250x150x35 215/70-15retreaded 300 2300 530 €

B 35 P 260x160x35 10.0/75-15.3 400 3500 560 €

DRIVE AXLE

B 23 PM 250x150x35 30/9.50R15retreaded 320 2300 570 €

B 35 PM 260x160x35 10.0/75-15.3 405 3500 690 €




www.bernardimacchine.it - FARM TRAILERS 9

SINGLE-AXLE HYDRAULIC 3-WAY TIPPER FARM TRAILERS


STANDARD AXLE

B 23

260x150x35215/70 R15retreaded

255

2300 525 €250x150x35 292

250x140x35 292

B 35260x150x35

10.0/75-15.3426

3500 630 €250x150x35 483

B 41 260x160x35 10.0/75-15.3 478 4000 650 €

DRIVE AXLE

B 23 M

260x150x35 30/9.50 R15retreaded 263

2300 570

€

250x150x35 205/70-15retreaded 299 €

250x140x35

B 35 M260x150x35

10.0/75-15.3422

3500 750 €250x150x35 477

B 41 M 260x160x35 10.0/75-15.3 480 4000 765 €




travel limit valve

wheel jack support

safety stay

lighting board

tool box two coats of paintbody anti-bending system grease nipple on rear tube

STANDARD EQUIPMENThydraulic tipping using tractor oil, travel limit valve, smooth sheet metal bed, safety stay for bed, hot-dip galvanized sides with rear stanchions, side extension fittings, wheel parking jack, lighting board, height-adjustable tow eye, mechanical brake, tool box complete with wheel chocks and 2 ratchet straps, quick coupler support. PTO shaft for powered trailer. Accessories see pages 14 -15 - 16- 17.

bolt on front panel


removable wheel jack


adaptable/adjustable tractor brake lever

rear stanchions with topand bottom hinged

panel opening

B 41 M


SINGLE-AXLE 3-WAY TIPPER FARM TRAILERS


STANDARD AXLE

B 45 280x160x40 10.0/75-15.3 445 4500 770 €

B 50 300x170x50 11.5/80-15.3 540 5000 870 €

B 60 300x170x50 11.5/80-15.3 645 6000 870 €

B 51 320x180x50 11.5/80-15.3 535 5000 1050 €

B 61 320x180x50 11.5/80-15.3 635 6000 1050 €

B 52 350x190x50 11.5/80-15.3 550 5000 1180 €

B 62 350x190x50 11.5/80-15.3 660 6000 1180 €

B 63 380x200x50 15.0/55-17 735 6000 1400 €

STANDARD EQUIPMENThydraulic tipping using tractor oil, travel limit valve, smooth sheet metal bed, safety stay for bed, hot-dip galvanized sides with rear stanchions, side extension fittings, wheel parking jack, lighting board, height-adjustable tow eye, mechanical brake, tool box complete with wheel chocks and 2 ratchet straps, quick coupler supports, hydraulic braking on B60/61/62/63. Accessories see pages 14 -15 - 16- 17.


quick coupler supports

max. pressure valvewith hydraulic braking

wheel jack support

tool box

bolt on front panel

removable wheel jackheight-adjustable tow eyehydraulic brakingfor models 60 - 61 - 62 – 63

B 60



DRIVE AXLE

B 45 M 280x160x40 10.0/75-15.3 511 4500 920 €

B 50 M 300x170x50 11.5/80-15.3 550 5000 1010 €

B 60 M 300x170x50 11.5/80-15.3 650 6000 1000 €

B 51 M 320x180x50 11.5/80-15.3 535 5000 1200 €

B 61 M 320x180x50 11.5/80-15.3 635 6000 1200 €

B 52 M 350x190x50 11.5/80-15.3 565 5000 1310 €

B 62 M 350x190x50 11.5/80-15.3 640 6000 1310 €

B 63 M 380x200x50 15.0/55-17 770 6000 1500 €




STANDARD EQUIPMENTSee standard axle + PTO shaft. Accessories see pages 14 -15 - 16- 17.

safety stay lighting board

two coats of paint



rear stanchions with top and bottom

hinged panel opening

tipping guide(except models B 45 - B 45 M)

body anti-bending system


TANDEM-AXLE 3-WAY TIPPER FARM TRAILER


STANDARD AXLE

B 110 450x210x60 305/70x19.5retreaded 1115 11000 2800 €

Price difference for 14,000 kg type approval €

removable parking jackwith gear reduction box

height-adjustabletow eye

tipping cylinder with anti-fall safety valve

pneumatic braking system


hydraulic service brakingsystem with automaticemergency/parking brake

STANDARD EQUIPMENThydraulic tipping using tractor oil, anti-fall safety valve, travel limit valve, smooth sheet metal bed, safety stay for bed, hot-dip galvanized sides with rear stanchions, side extension fittings, parking jack with gear reduction box, lighting board, height-adjustable tow eye, tool box complete with wheel chocks and 2 ratchet straps, quick coupler supports, air or continuous hydraulic braking, leaf spring suspension with equalizer, rear steering axle with hydraulic locking, standard front axle. Ac-cessories see pages 14 -15 - 16- 17.

tool box parking jack support


B 110 M



FRONT DRIVE AXLE

B 110 M 450x210x60 305/70x19.5retreaded 1140 11000 2950 €



WITH REVERSING GEAR for anticlockwise tractor PTO ASK FOR QUOTE


lighting board

rear steering axle with hydraulic lockingleaf spring suspension with equalizer tipping guide

bolt on front panel

STANDARD EQUIPMENTSee standard axle + front drive axle + PTO shaft. Accessories see pages 14 -15 - 16- 17.

two coats of paint



safety stay


14

Pocket for stake

mod. from B 21to B 45 € each


FARM TRAILER ACCESSORIES

Light ratchet strap


PTO pump mounting for tipping

€

Mounting of brake cylinder with adjustment valve on mechanical levers, not type approved

€

Pneumaticallyengaged/disengaged drive

€

Hydraulicallyengaged/disengaged drive

€

Hydraulic parking jack mounting

€

Mounting of medium winch


Heavy ratchet strap


1.2m log stake

mod. from B50to B110 € each

Wheel jack mounting

mod. B21 P, B23 P,B35 P, B 21 €

Multifunctional joystick

ASK FOR QUOTE

Pocket for stake with plug



Reinforced rims

€ a pair

1.2m log stake

mod. from B21to B45 € each

Mounting of heavy winch


FARM TRAILERS - www.bernardimacchine.it

15

NOTES

Hydraulic drive operatedwith tractor oil

only forDRIVE AXLE €

Double-acting cylinders for raising or lowering rear axle

mod. B 110 €

Rear extension not type approved

€

www.bernardimacchine.it - FARM TRAILERS

Gearbox with gear ratiofor two tractors

(price difference)mod. from B 21 to B 45 €mod. from B 50 to B 110 €

Light steeringdrawbar – type approved

mod. from B 35 to B 63 €

Heavy steeringdrawbar – type approved

mod. B110 €

Superior differential

for B 62 M - 63 M €

Mounting of leaf spring suspension

mod. from B 45 to B 63 €

Stake extension

€ each

Mounting of EXTE truck stake pocket brackets

ASK FOR QUOTE

16 FARM TRAILERS - www.bernardimacchine.it

FARM TRAILER SIDE EXTENSIONS

TOP AND BOTTOM HINGED SIDE OPENINGFOR STANDARD SIDES PRICE

from B 23 to B 45 €



SIDE EXTENSIONS PRICE

dimensions 225x140 from 30 cm €

dimensions 250x140dimensions 250x150

from 35 cm €

from 40 cm €

from 50 cm €

dimensions 260x150dimensions 260x160

from 35 cm €

from 40 cm €

from 50 cm €

dimensions 280x160from 40 cm €

from 50 cm €


from 60 cm €


from 60 cm €


from 60 cm €


from 60 cm €


ACCESSORIES

Automatic tailgateopening

except for B 15 and B 21 €

Side panels split in two

for each full set of 4 sides €

Hydraulic side panelopening

€

Fittings for swing-opentailgate

€

TOP AND BOTTOM HINGED SIDE OPENINGWITH SIDE EXTENSIONS PRICE




TUBULAR SIDES QUOTED SEPARATELY.

Top and bottom hinged side opening for standard sides

Side extensions

Top and bottom hinged side opening with side extensions

17www.bernardimacchine.it - FARM TRAILERS

FARM TRAILER TYRES

B 23 B 35B 41 B 45 B 50 B 51 B 52 B 60 B 61 B 62 B 63 B 110

305/70 R19.5 retreaded - - - - - € - € € € -285/70 R19.5 retreaded - - - - € - - € - - -265/70 R19.5 retreaded - - - € - - - - - - -15.0/55 - 17 - - - - € € - € € - -435/50x19.5 retreaded on-road tyres - - - - - - - - - €

€ frontonly

USED AND RETREADED TYRES ARE NOT COVERED BY THE WARRANTY

DIFFERENCE FOR LARGER WHEELS ON TRAILERS WITH DRIVE AXLE

DIFFERENCE FOR LARGER WHEELS ON TRAILERS WITH STANDARD AXLE

TYRE TREAD PATTERNS

10.0/75x15.3 TRACTOR11.5/80x15.3 TRACTOR 400/60x15.5 TRACTOR

10.5 -15 20 PR EX AVIOretreaded

265/70 R19.5 retreaded285/70 R19.5 retreaded305/70 R19.5 retreaded

435/50 R19.5 retreadedon-road or forest tyre

205/70x15 215/70 R15 retreaded 205/70 R15 - 30/9.50x15 retreaded 27x8.50x15

10.0/75x15.311.5/80x15.313.0/55x1615.0/55 - 17

B 21 MB 23 M

B 35 MB 41 M B 45 M B 50 M B 51 M B 52 M B 60 M B 61 M B 62 M B 63 M B 110 M

27x8.50 - 15 € - - - - - - - - - -10.5-15 20 Pr retreaded aircraft - € € € € - - - - - -10.0/75x15.3 tractor - € - - - - - - - - -11.5/80-15.3 tractor - - - € € € - - - - -305/70 R19.5 retreaded - - - - - € - € € € -285/70 R19.5 retreaded - - - - € - - € - - -265/70 R19.5 retreaded - - - € - - - - - - -15.0/55-17 - - - - € € - € € - -400/60x15.5 14 Pr tractorforestry - - - - € € - € € € -435/50x19.5 retreaded on-road or forest tyres - - - - - - - - - € €

front only

18


B 35 FM+ C 350 Z

260x150x3510.0/75-15.3

5943500 1060 €

250x150x35 594

B 41 FM+ C 350 Z 260x160x35 10.0/75-15.3 610 4000 1080 €

B 45 FM+ C 350 Z 280x160x40 10.0/75-15.3 577 4500 1150 €

B 45 FM+ C 450 Z 280x160x40 10.0/75-15.3 605 4500 1220 €

FOR LOADER FEATURES SEE PAGES 42 - 43




FORESTRY TRAILERS - www.bernardimacchine.it

SINGLE-AXLE HYDRAULIC 3-WAY TIPPER FARM TRAILERS WITH LOADER

B 45 FM + C 350 Z

standard vertical hydraulic outrigger kit

height-adjustabletow eye

removable crane mounting bracket

drawbar extension removable parking jack

reinforced frame

pocket for stake with plug:2 RH + 2 LH + 2rear

fold-down hydraulic outrigger kit

STANDARD EQUIPMENTtype-approved drawbar extension, pockets for stakes with plug: 2 RH + 2 LH + 2 rear, parking jack, mounting of C 350 - C 450 crane with fold-down hydraulic outriggers, (for additional standard equipment, see pages 9 - 11 - 42)

B 60 FTS + C 450 Z

19

SINGLE-AXLE HYDRAULIC 3-WAY TIPPER FARM TRAILERS WITH LOADER

www.bernardimacchine.it - FORESTRY TRAILERS

Additional accessories see pages 14 - 15 - 16 - 43.

SPECIFIC ACCESSORIES

kit detachable PTO pumpand oil reservoir

€

Fixed seat

€

Tractor three-point hitch

€

B 50 + C 350 Z

B 45 FM + C 350 ZB 60 FTS + C 450 Z

8 - function hydrauliccontrol valve(6+2 electr. ON/OFF)

€

20 FORESTRY TRAILERS - www.bernardimacchine.it

SINGLE-AXLE DRIVE-AXLE 3-WAY TIPPER FORESTRY TRAILERS


B 60 FTM

300x170x50 11.5/80 - 15.3TRACTOR 1096÷1313 6000 1350

€

+ C 450 €

+ IB 2600 €

B 61 FTM

320x180x50 11.5/80 - 15.3TRACTOR 1065÷1455 6000 1500

€

+ C 450 €

+ IB 2600 €

B 62 FTM

350x190x50 305/70 R19.5retreaded 1195÷1505 6000 1680

€

+ IB 35 Z 60 €

+ IB 4600 €

B 63 FTM

380x200x50 305/70 R19.5retreaded 1325÷1557 6000 1800

€

+ IB 35 Z 60 €

+ IB 4600 €

LOADER OPTION FOR TRAILER WITH STANDARD EQUIPMENT AND MOUNTING SEE PAGES 42 - 44 - 45 - 47




STANDARD EQUIPMENTTYPE APPROVAL WITH CRANES OF VARIOUS KINDS, front provision for crane, hydraulic tipping using tractor oil, travel limit valve, pull-out front crane guard, smooth sheet metal bed, safety stay for bed, hot-dip galvanized sides with rear stanchions, side extension fittings, parking jack with gear reduction box, lighting board, height-adjustable tow eye, tool box complete with wheel chocks and 2 ratchet straps, quick coupler supports, hydraulic braking, 4 removable 1.20m stakes, pockets for stakes with plug: 2 RH + 2 LH + 2 rear, PTO shaft.

pull-out crane guard

reinforced frame

tool box


rear stanchions with top and bottom hinged panel opening

tipping guide

grease nipple on rear tube lighting board with guard

21www.bernardimacchine.it - FORESTRY TRAILERS

Additional accessories see pages 26 e 27. Other wheel options see page 33.


Superior differential

for B 62 - 63 FTM €

Crane pump coupling on gearbox

€

Steering drawbar – type ap-proved

for B 60 - 61 FTM. €

for B 62 - 63 FTM. €

DOMEX 700

4mm "DOMEX 700" sheet steel used for bed

for B 60-61-6263 FTM €

hydraulic parking jack(optional extra)


frame extensionfor attaching crane



max. pressure valvefor hydraulic braking


two coats of paint

pockets for stakesplus 1.2m stakes


hydraulic braking

safetystay

B 63 FTM + IB 4600


TANDEM-AXLE 3-WAY TIPPER FORESTRY TRAILER


B 110 FTM 380x200x50 305/70x19.5retreaded 1110 - 1205 11000 2660 €

B 110 FTM +IB 4600 380x200x50 305/70x19.5

retreaded 1110 11000 4010 €

B 110 FTM +IB 6600 380x200x50 305/70x19.5

retreaded 1205 11000 4330 €


LOADER OPTION FOR TRAILER WITH STANDARD EQUIPMENT AND MOUNTING SEE PAGES 47 - 48




DOMEX 700

STANDARD EQUIPMENTTYPE APPROVAL WITH CRANES OF VARIOUS KINDS, front provision for crane, hydraulic tipping using tractor oil, travel limit valve, anti-fall safety valve, pull-out front crane guard, smooth sheet metal bed, safety stay for bed, hot-dip galvanized sides with rear stanchions, side extension fittings, parking jack with gear reduction box, lighting board with wire guard, height-adjustable tow eye, tool box complete with wheel chocks and 2 ratchet straps, quick coupler supports, hydraulic or air braking, 4 removable 1.20m stakes, pockets for stakes with plugs: 2 RH + 2 LH + 2 rear, leaf spring suspension with equalizer, standard rear steering axle with hydraulic locking, front drive axle, PTO shaft.

tipping guide



4mm DOMEX 700sheet steel bed

grease nipple on rear tube lighting board with guard FRAME REINFORCED WITH HIGH-STRENGTH TUBULAR STEEL



pneumatic braking system


Additional accessories see pages 26 - 27. Other wheel options: see page 33.


Steering drawbar – type approved

€

Reinforced rims

€

Crane pump couplingon gearbox

€


rear steering axle with hydraulic locking

leaf spring suspension with equalizer

tool box

two coats of paint

safetystay


B 110 FTS + IB 6600

pocket for stake plus 1.2m stake

hydraulic parking jack (optional extra)steering drawbar (optional extra)



TANDEM-AXLE 3-WAY TIPPER FORESTRY TRAILER


B 140 FTM 430X210X60

385/65-22.5retreaded

1820÷1980 14000 4625€

385/65-22.5new €

B 140 FTM+IB 6600/6.70 430X210X60


1820 14000 6140€

385/65-22.5new €

B 140 FTM + IB 7600/7.70 430X210X60


1980 14000 6425€

385/65-22.5new €





STANDARD EQUIPMENTTYPE APPROVAL WITH CRANES OF VARIOUS KINDS, front provision for crane, hydraulic tipping using tractor oil, travel limit valve, anti-fall safety valve, pull-out front crane guard, smooth DOMEX 700 or textured sheet metal bed, safety stay for bed, H60 hot-dip galvanized sides with rear stanchions, side extension fittings, parking jack with gear reduction box, lighting board with wire guard, height-adjustable tow eye, tool box complete with wheel chocks and 2 ratchet straps, quick coupler supports, hydraulic or air braking, 6 removable 1.20m stakes, pockets for stakes with plugs: 4 RH + 4 LH + 2 rear, leaf spring suspension with equalizer, standard rear steering axle with hydraulic locking, front drive axle with gearbox on axle shafts, 10-hole rims with reinforced edge and valve protector, superior gearbox for ratio up to 1:6, PTO shaft.

B 140 FTM + IB 6600

FRAME REINFORCED WITHHIGH-STRENGTH TUBULAR STEEL


heightadjustable tow eye


tool box

pneumatic braking systemwith automatic parking brake

superior differential with gear-boxes on axle shafts




Additional accessories see pages 26 - 27. - Additional accessories see pages 33.


New twin drive axle system with independent axles and lowered equalizer

€


€


€

DOMEX 700

4mm DOMEX 700 or non-slip textured sheet metal bed

two coats of paint

reinforced rimsand valve protector



tipping guide


tipping cylinderand anti-fall safety

valve

rear steering axle withhydraulic locking body anti-bending system

reinforced lighting boardwith wire guards


3-WAY TIPPER FORESTRY TRAILER ACCESSORIES


ASK FOR QUOTE

Stake extension

for B 60-61-62 andB 63-110 FTM € each

for B 140 FTM € each

Pocket for stake



Ratchet strap

€ each


€ each

Double-acting cylinders for raising or lowering rear axle

for mod. B110 140 FTM €

Rear extension - not type approved

for B 60-61-62and B 63-110 FTM €

for B 140 FTM €

Pocket for stake with plug

for B 60-61-62 and B 63-110 FTM € each


1.2m log stake



Reinforced rims

€ a pair


€

Pneumatically engaged/disen-gaged drive

€

Hydraulically engaged/ disengaged drive

€


ASK FOR QUOTE

Hydraulic drive operated with tractor oil

€

Hydraulic drive operated withindependent hydraulic system bymeans of PTO

€

Gearbox with gear ratio for two tractors

(price difference)for B 60-61-62and 63-110 FTM €

B 140 FTM €


3-WAY TIPPER FORESTRY TRAILER SIDES

TOP AND BOTTOM HINGED SIDE OPENINGFOR STANDARD SIDES PRICE

for B 60 - 61 FTM €

for B 62 - 63 - 110 FTM €

for B 140 FTM €

SIDE EXTENSIONS PRICE


from 60 cm €


from 60 cm €


from 60 cm €


from 60 cm €


ACCESSORIES

Side panels split in two

for each full set of 4 sides €

TOP AND BOTTOM HINGED SIDE OPENINGWITH SIDE EXTENSIONS PRICE

for B 60 - 61 FTM €

for B 62 - 63 - 110 FTM €

for B 140 FTM €

TUBULAR SIDES QUOTED SEPARATELY.

Automatic tailgate opening

€

Fittings for swing-open tailgate

for each full set of panels €

Top and bottom hinged side opening for standard sides

Side extensions

Top and bottom hinged side opening with side extensions


DRIVE-AXLE FORESTRY LOG TRAILER

TYPE LOAD FRAME (cm) WHEELS TOW EYE LOAD (kg) TOTAL CAPACITY (kg) TARE (kg) PRICE

B 60 FM 420x210


1210 6000 2150€

385/65-22.5nuove €

B 60 FM +IB6600/6.00 350x210


1420 6000 3665€

385/65-22.5nuove €

B 60 FM + IB7600/6.60 350x210


1420 6000 3665€

385/65-22.5nuove €





STANDARD EQUIPMENTTYPE APPROVAL WITH CRANES OF VARIOUS KINDS or without crane, pull-out front crane guard, parking jack with gear reduction box, lighting with wire guard, tool box complete with wheel chocks and 2 ratchet straps, quick coupler supports, hydraulic braking, 4 removable stakes, pockets for stakes: 2 RH + 2 LH + 2 rear, 10-hole rims with reinforced edge and valve protector, superior gearbox for ratio up to 1:6, drive axle with gearboxes on axle shafts, PTO shaft.

B 60 FM + IB 7600

FRAME REINFORCED WITH HIGH-STRENGTH TUBULAR STEEL

two coats of paint



tool box


Protection on wheels

€


Additional accessories see page 32. Other wheel options see page 33.


€


€

pull-out crane guard stake pocket bracketand reinforced stake

superior differential with gearboxes on axle shafts

hydraulic braking

number plate holderand pockets for rear stakes

lighting withwire guard


30

TWIN-AXLE FORESTRY LOG TRAILER



B 140 FM 500x210385/65-22.5

retreaded 1760 14000 3395€

385/65-22.5 new €

B 140 FM +IB 6600/6.00orIB 6800/7.00

430x210

385/65-22.5retreaded 1704 14000 4910

€

385/65-22.5 new €

B 140 FM +IB 7600/6.60orIB 7800/7.60

430x210


1880 14000 5195€

385/65-22.5 new €

LOADER OPTION FOR TRAILER WITH STANDARD EQUIPMENT AND MOUNTING SEE PAGES 48 - 49 - 53 - 54




STANDARD EQUIPMENTTYPE APPROVAL WITH CRANES OF VARIOUS KINDS or without crane, pull-out front crane guard, parking jack with gear reduction box, lighting with wire guard, tool box complete with wheel chocks and 2 ratchet straps, quick coupler supports, hydraulic or air braking, 6 removable stakes, pockets for stakes: 3 RH + 3 LH + 2 rear, height-adjustable tow eye, 10-hole rims with reinforced edge and valve protector, superior gearbox for ratio up to 1:6, leaf spring suspension with equalizer, drive axle with gearboxes on axle shafts, standard rear steering axle with hydraulic locking, PTO shaft.

B 140 FM + IB 7600

pneumatic brakingsystem with automatic parking brake hydraulic parking jack (optional extra)steering drawbar (optional extra)


tool box

two coats of paint




Ulteriori accessori: vedi pag. 32 - - Other wheel options: see page 33

version with fixed platform 430x210

€

Protection on wheels

€

Steering drawbar – type ap-proved

€


€

New twin drive axle system with independent axles and lowered equalizer

€


rear steering axlewith hydraulic locking

pull-out crane guard stake pocket bracketand reinforced stake

superior differential withgearboxes on axle shafts

number plate holder andpockets for rear stakes

lighting with wire guard



LOGGING FORESTRY TRAILER ACCESSORIES

Stake pocket bracket+complete with stake

€ each

Double-acting cylinders for rais-ing or lowering rear axle

for B 140 FM €

Rear extension with stake pocket bracket and removable stakes - not type approved

€

Ratchet strap

€ each


€ each


ASK FOR QUOTE


€


€

Hydraulically engaged/disengaged drive

€


ASK FOR QUOTE


€

Hydraulic drive operated withindependent hydraulic system bymeans of PTO

€

Stake extension

€ each


(price difference) €


FORESTRY TRAILER TYRES

B 60 FTM B 61 FTM B 62 FTM B 63 FTM B 110 FTM

B 140 FTM B 60 FM B 140 FM B 140

FTXS B 140 FXS

400/60 x 15.5 forest tyre - € € € - - - - - -265/70 R19.5 retreaded € € - - - - - - - -435/50 x 19.5 retreadedon-road or forest tyres - - - €

€frontonly

- - - - -

500/45 x 22.5 forest tyre* - - - - - - € - € €

600/50 x 22.5 forest tyre* - - - - - - € - € €

* wheels not covered by type approval provisions - net cost to bring up to date € 400,00

USED AND RETREADED TYRES ARE NOT COVERED BY THE WARRANTY

DIFFERENCE FOR LARGER WHEELS

TYRE TREAD PATTERNS

10.0/75x15.3 TRACTOR11.5/80x15.3 TRACTOR

400/60x15.5 forest tyre385/65x22.5 new 385/65x22.5 retreaded

500/45 x 22.5forest tyre

265/70 R19.5 retreaded285/70 R19.5 retreaded305/70 R19.5 retreaded

435/50 R19.5 retreadedon-road or forest tyres


34

TYPE LOAD FRAME (cm) WHEELS TOW EYE LOAD (kg) TOTAL CAPACITY (kg) TARE (kg) PRICE

B 140 4WD 500x210 - 240 500/45x22,5forest tyres 1810 14000 3800 €

B 140 4WD +IB 7600/6.60orIB 7800/7.60

430x210 - 240 500/45x22,5forest tyres 1925 14000 5450 €

B 140 4WD +IB 9800 430x210 - 240 500/45x22,5

forest tyres 2185 14000 5810 €

LOADER OPTION FOR TRAILER WITH STANDARD EQUIPMENT AND MOUNTING SEE PAGES 49 - 54 - 55




PRICE DIFFERENCE FOR 600/50X22,5 FOREST TYRES €


FORESTRY TRAILER WITH FORWARDER DRIVE AXLE

slide-out lighting board 4WD "NAF" differential with total 4WD locking

Forest tyres 600/50x22.5 (optional extra)

movable stakepocket brackets

extension with stakepocket bracket (optional extra)

STANDARD EQUIPMENTTYPE APPROVAL WITH CRANES OF VARIOUS KINDS or without crane, steering drawbar, DOMEX 700 steel frame, pull-out front crane guard, parking jack with gear reduction box, slide-out lighting, tool box complete with wheel chocks and 2 ratchet straps, quick coupler supports, hydraulic braking, 4 movable stake pocket brackets, 8 removable shaped stakes, 10-hole rims with reinforced edge and valve protector, FORWARDER drive axle with 4WD (NEW), hydraulic braking with wet multi-plate disks, PTO shaft. Accessories see pages 36 e 37.

DOMEX 700

frame made entirely fromDOMEX 700 sheet steel

B 140 4WD + IB 7600

two coats of paint

55 cm

35


B 140 4WDT 480x210 - 240 500/45x22,5 1645÷1870 14000 6430÷6790 €

B 140 4WDT +IB 7600/7.70 480x210 - 240 500/45x22,5 1780 14000 6510 €

B 140 4WDT +IB 9000 480x210 - 240 500/45x22,5 1860÷1870 14000 6790 €





SIDES, ACCESSORIES and SPECIAL APPLICATIONS FOR SIDES ASK FOR QUOTE

PRICE DIFFERENCE FOR 600/50X22,5 FOREST TYRES €


under-chassis guardhydraulic service brakingsystem control with automatic

parking brake and wet multi-plate disk brakes

reinforced rims and valve protector


constant-velocity PTO shaft

steering drawbar

STANDARD EQUIPMENTTYPE APPROVAL WITH CRANES OF VARIOUS KINDS or without crane, hydraulic 3-way tipping bed, steering drawbar, travel limit valve, DOMEX 700 steel frame and bed, safety stay for bed, pull-out front crane guard, parking jack with gear reduction box, slide-out lighting, tool box complete with wheel chocks and 2 ratchet straps, quick coupler supports, hydraulic braking, pockets for stakes: 4RH + 4 SX + 4 rear, 8 removable 1.20m stakes, 10-hole rims with reinforced edge and valve protector, FORWARDER drive axle with 4WD (NEW), hydraulic braking with wet multi-plate disks, PTO shaft. Accessories see pages 36 e 37.

B 140 4WDT


ACCESSORIES FOR FORESTRY TRAILERS WITH FORWARDER DRIVE AXLE

Rear extension - not type ap-proved

for B 140 4WD €

Ratchet strap

€ each


for B 140 4WDT ASK FOR QUOTE


€


€

Movable stake pocket bracket with 2 stakes

for B 140 4WD € each

Hydraulically engaged/disengaged drive

€


ASK FOR QUOTE


(price difference) €


€

Pocket for stake

for B 140 4WDT € each

1.2m log stake


Shaped fixed bed

for B 140 4WD ASK FOR QUOTE


€

Hydraulic drive operated with independent hydraulic system by means of PTO

€

Stake extension



SYNKRO HYDRAULIC DRIVE

TYRE TREAD PATTERNS



Tracks

ASK FOR QUOTE

SYNCHRONIZED HYDRAULIC DRIVE WITH CLOSED-LOOP VARIABLEDISPLACEMENT PUMP AND MOTOR

TECHNICAL FEATURES• Software-managed synchronizing with cabin-

mounted control panel

• Programmable synchronizing for more than one tractor

• 2-speed gear change from 0-5 km/h and 0-10

km/h (approx.), engaged and disengaged via

cabin-mounted control panel

• The closed-loop hydraulic system used means the

drive also works as a brake when running downhill

• +/- button for early/delayed drive engagement

so that any manoeuvre (climbing, downhill and

sharp U-bends) can be carried out entirely safely

APPLICATION ONB 140 4WD - 4WDT

Full load capacity (kg) 14000

Speed 1 with PTO 1000 rpm (km/h) 0÷5

Max. driving torque for wheel (Nm) 11000

Speed 2 with PTO 1000 rpm (km/h) 0÷10

Driving torque for wheel speed 2 (Nm) 5500

Circuit pressure while running (bar) 350

Circuit pressure while running (bar) 400

Max. climbable gradient speed 1 55%

Max. climbable gradient speed 2 20%

Wheels 600/50 - 22.5

PRICE €

38

FORESTRY LOG TRAILER

TYPE LOAD SURFACE (sq m) LOAD LENGTH (mm) AXLE SQUARE X-SECTION DIMENSIONS (mm)

FRAME TUBING SIZE (mm)

STEERING DRAWBARN° OF CYLINDERS WHEELS RECOMMENDED LOADERS PAIRS OF STAKES

STANDARD ISSUE PAYLOAD (kg) TARE (kg) PRICE

B 9000 1,8 3400 60x60 - 6 holes 1x (160x160) 1 11.5/80 x 15.3 525 - IB 2800 2 9000 950 €

B 12000 2,7 4000 80x80 - 8 holes 2x (200x100) 2 400/50 x 15.5 FOREST TYRE 680 - IB 2800 4 12000 1550 €

B 12000 S 2,4 3620 80x80 - 8 holes 2x (200x100) 2 400/50 x 15.5 FOREST TYRE 680 - 700 - IB 2800 - IB 6800 4 12000 1750 €

B 14000 2,9 4300 80x80 - 8 holes 2x (250x150) 2 500/45 x 22.5 FOREST TYRE 700 - 840 - IB 6800 - IB 7800 4 14000 1900 €

CRANE APPLICATION ASK FOR QUOTE


hydraulic braking with cylinder guard



twin-cylindersteering drawbar

pump, oil reservoirand oil kit


STANDARD EQUIPMENTSteering drawbar, support ready for crane mounting, pull-out crane guard, removable parking jack, lighting, hydraulic braking on four wheels (on two wheels for B9000), removable shaped stakes, wheels with reinforced rims with valve protector (except for B9000), tandem axle with independent rigid equalizers.

tandem axle withindependent rigid equalizers

B 12000 S + IB 6800


TYPE LOAD SURFACE (sq m) LOAD LENGTH (mm) AXLE SQUARE X-SECTION DIMENSIONS (mm)

FRAME TUBING SIZE (mm)

STEERING DRAWBARN° OF CYLINDERS WHEELS RECOMMENDED LOADERS PAIRS OF STAKES

STANDARD ISSUE PAYLOAD (kg) TARE (kg) PRICE

B 9000 1,8 3400 60x60 - 6 holes 1x (160x160) 1 11.5/80 x 15.3 525 - IB 2800 2 9000 950 €

B 12000 2,7 4000 80x80 - 8 holes 2x (200x100) 2 400/50 x 15.5 FOREST TYRE 680 - IB 2800 4 12000 1550 €

B 12000 S 2,4 3620 80x80 - 8 holes 2x (200x100) 2 400/50 x 15.5 FOREST TYRE 680 - 700 - IB 2800 - IB 6800 4 12000 1750 €

B 14000 2,9 4300 80x80 - 8 holes 2x (250x150) 2 500/45 x 22.5 FOREST TYRE 700 - 840 - IB 6800 - IB 7800 4 14000 1900 €

CRANE APPLICATION ASK FOR QUOTE

slide-out lighting board(for B12000 S only)

high-strength steel reinforcedstakes (10 mm thick)

valve protector

movable equalizerfor B 12000 S only

Accessories see page 41.

B 9000 + PALMS 525

B 12000 S + IB 6800

SPECIFIC TYRE TREAD PATTERNS AND PRICE DIFFERENCE

11.5/80x15.3

400/60x15.5 forest tyrefor mod. B9000 €

385/65x22.5 newfor mod. B12000 and B12000 S €

500/45x22.5 forest tyre

for mod. B14000 €

600/50x22.5 forest tyre

for mod. B14000 €

40

FORESTRY LOG TRAILER

B 9000


TYPE A (mm) B (mm) C (mm) D (mm) E (mm) F (mm) L (mm) M (mm) N (mm) O (mm)

B 12000 2685 4000 525 1110 1050 1225 6051 900 1971 2451

B 14000 2705 4245 505 1150 1050 1440 6260 1000 2071 2540

A

N

O

B

D

L

M

E FC

B 12000B 14000

41

Hydraulic drive on wheel hubs, driving force equivalent to 6000 (Nm)per wheel, at 250 (bar), electric on/off to engage/disengage

for B 12000 S €

Independent hydraulic system, hydraulic pump, oil reservoir and oil, for loader

with valve forhydraulic drive €

without valve forhydraulic drive €

Platform for support and operating control valves above drawbar

€

Hydraulic drive with rolleron wheels

for mod. B12000 and B14000 €


B 12000 S

Pair of stake pocket holders

for mod. B9000 €

for mod. B 12000B 12000 S - B 14000

€

Rear extension with stakes,pulls out manually

for mod. B9000 €

for mod. B 12000B 12000 S - B 14000 €


Type approval for road use(total capacity kg)

for mod. B9000 (6000 kg)hydraulic brakes only netto €

for mod. B9000 (9000 kg)hydraulic or air brakes netto €

Type approval for road use(total capacity kg)

for mod. B12000 (12000 kg)for mod. B12000S (12000 kg)for mod, B14000 (14000 kg)hydraulic or air brakes

netto €

Type approvalfor road use

Type approvalfor road use

42 FORESTRY LOADERS - www.bernardimacchine.it

"Z" SERIES FORESTRY LOADERS

C 350 Z C 450 Z

Moment rating (kNm) 10 12

Max. reach (m) 3,50 4,20

Moment on rotation axis (kNm) 7 14

Slewing angle 360° 360°

Recommended pump flow rate (l/min) 15 15 / 20

Working pressure (bar) 170 170

Loader weight (kg) 245 375

PRICE € €

FOLD-DOWN HYDRAULIC STABILIZERS (100 kg) € €

MOUNTING ON OUR TRAILER AND CRANE MOUNTING BRACKET € €

C 350 Z

STANDARD EQUIPMENTC 350 Z – C 450 Z• 360° rotation and back

• Operated from ground

• Tractor-operated hydraulic system

• Grapple mod. BKP 10 (BKP 10 S for C 450 Z)

with continuous 360° rotator model

• 7-function hydraulic control valve

• Z-folding boom

• Hydraulic extension

• Adjustable support for hydraulic control valve

turret rotation withdual rack on C 450 Z

descent control valve

frame made entirelyfrom DOMEX 700

CRANE JOINTS MACHINEDON MACHINING CENTRE

lock valves

fold-down hydraulic stabilizers

adjustable supportfor hydraulic control valve

DOMEX 700

43www.bernardimacchine.it - FORESTRY LOADERS


Tractor 3-point hitch

€

Swivel seat with post

€

Grab bucket 125l capacity

€

Kit detachable PTO pumpand oil reservoir

€

Vertical stabilizers – pull out manually

€

C 350 Z C 450 Z

- -

Four-tooth manure grapple

€

Fixed seat

€

8 - function hydrauliccontrol valve(6+2 electr. ON/OFF)

€

44 FORESTRY LOADERS - www.bernardimacchine.it


ACCESSORIES SPECIFICALLY DESIGNED FOR IB 2600

STANDARD EQUIPMENT• Turret slewing 400° and back with twin cylinder rack system in oil bath

• Individually controlled hydraulic outriggers

• Folding boom

• Control console w/ 2 joysticks + 2 pedals

high on post


• Telescopic end boom

• Grapple BKP 10 S (1.05 m opening)

• Rotator BKR 35 360° continuous rotation


€

IB 2600

Moment rating (kNm) 30

Max. reach (m) 4,70

Moment on rotation axis (kNm) 10

Slewing angle 400°

Recommended pump flow rate (l/min) 30

Working pressure (bar) 170

Loader weight (kg) 650

PRICE €

MOUNTING ON OUR TRAILER €


€

IB 2600

Movable pumpand oil reservoir kit

€

Difference for grapple BKP 12

€

www.bernardimacchine.it - FORESTRY LOADERS 45

ACCESSORIES SPECIFICALLY DESIGNED FOR IB 35Z.60

STANDARD EQUIPMENT• Turret slewing 400° and back with 4-cylinder rack system in oil bath


• Folding boom

• Control console w/ 2 joysticks + 2 pedals high on post


• 6.00m boom with single hydraulic extension

• Grapple BKP 12 (1.20 m opening)


Difference for rotator BKR 50

€


€

IB 35Z.60


Max. reach (m) 6


Slewing angle 400°




PRICE €



€

IB 35Z.60


€

FORESTRY LOADERS - www.bernardimacchine.it 46


ACCESSORIES SPECIFICALLY DESIGNED FORIB 3600 - IB 4600

STANDARD EQUIPMENT• Turret slewing 400° and back with 2-cylinder rack-

system in oil bath


• Folding boom

• Control console w/ 2 joysticks + 2 pedals high on

post

• Hydraulic pump with oil reservoir and oil

• 5m boom with single hydraulic extension




mod. IB 3600 €

mod. IB 4600 €

RH and LH hydraulically extend-ing vertical outriggers

€

Heat exchanger

€

IB 3600


Max. reach (m) 5,00


Slewing angle 400°

Recommended pump flow rate (l/min) 35/45



PRICE €



€

IB 3600




• Folding boom






Anti-sway

for IB 4600 €

IB 4600


Max. reach (m) 6,00


Slewing angle 400°




PRICE €


ACCESSORIES SPECIFICALLY DESIGNED FOR IB 3600 - IB 4600


€

IB 4600


for IB 4600 €






• Folding boom



• 6.00m boom with single hydraulic extension or 6.70m with double



IB 6600 6,00 IB 6600 6,70


Max. reach (m) 6,00 6,70



Recommended pump flow rate (l/min) 50/60 50/60



PRICE € €

MOUNTING ON OUR TRAILER € €


€

Difference for flanged rotator BKR 65 F

€

Anti-sway

€

Heat exchanger

€

IB 6600



STANDARD EQUIPMENT• Turret slewing 400° and back with cylinder rack system in oil bath


• Folding boom


• Hydraulic pump with oil reservoir and oil• 6.60 m boom with single hydraulic extension or 7.70 m with double



Extra for double hydraulic piston pump

€

Servo-hydraulic controls

€

IB 7600 6,60 IB 7600 7,70


Max. reach (m) 6,60 7,70






PRICE € €


RH and LH hydraulically exten-ding vertical outriggers

€


€

IB 7600



IB 9000


Max. reach (m) 8,00


Slewing angle 400°




PRICE €




• Folding boom.



• 8.00m boom with double hydraulic extension



IB 9000


Two lights for use at night

€

Difference for other rotator options

BKR 110 F flanged €

BKR 65 F flanged €

Anti-sway

€ 610,00

Heat exchanger

€

Double hydraulic piston pump

€


€


€


€


€

Electro-hydraulic proportionalcontrol with joystick-operated remote control

€

Joystick-operated electro-hy-draulic proportional control

€



"L" SERIES FORESTRY LOADERS


IB2800


Max. reach (m) 6,20


Slewing angle 400°




PRICE €







• Grapple BKP 10 S (1.05 m opening)

• Rotator BKR 35 360° continuous rotation IB 2800


€


€

Movable pump and oil reservoir kit

€


€










Additional accessories see pages 54 - 55.

IB6800


Max. reach (m) 7,0


Slewing angle 400°




PRICE €


2000 kg extended 2 mt.1300 kg extended 5 mt. 870 kg extended 7 mt.

IB 6800


€

Heat exchanger

€


€


€


"L" SERIES FORESTRY LOADERS

ACCESSORIES SPECIFICALLY DESIGNED FOR IB 6800 - 7800 - 9800





• 7.54m boom with single hydraulic extension or 8.26 with double



IB 7800 7,60 IB 7800 8,30


Max. reach (m) 7,60 8,30






PRICE € €


IB 7800

Difference for flanged rotatorBKR 65 F

for IB 6800 -7800 €


€


€


€


ACCESSORIES SPECIFICALLY DESIGNED FOR IB 6800 - 7800 - 9800





• 9.00 m boom with single hydraulic extension



Additional accessories for IB 9800 see page 51.

IB 9800


Max. reach (m) 9,00


Slewing angle 400°




PRICE €


IB 9800

Heat exchanger

€


€

Anti-sway

€

Difference for flanged rotatorBKR 110 F

per IB 9800 €


PALMS "L" SERIES FORESTRY LOADERS

PALMS 410 PALMS 525 PALMS 680

Moment rating (kNm) 27 40 47

Max. reach (m) 4,10 5,25 6,80

Moment on rotation axis (kNm) 5,5 10 10

Slewing angle 360° 360° 370°

Recommended pump flow rate (l/min) 15/20 30/40 40/60

Working pressure (bar) 180 180 180

Loader weight (kg) 600 900 1130

PRICE € € €

DIFFERENCE FOR SERVO-HYDRAULIC CONTROLS - - €

HYDRAULIC FOLD-DOWN OUTRIGGERS - € €

MOUNTING ON TRAILER ASK FOR QUOTE ASK FOR QUOTE ASK FOR QUOTE

PALMS 525

PALMS 680

STANDARD EQUIPMENT FORPALMS 410 - PALMS 525 - PALMS 680• Operated with tractor oil

• Turret slewing with 4-cylinder rack system in oil bath (2 for PALMS 410)

• Vertical hydraulic outriggers

• L-folding boom (Mod. 680 with single hydraulic extension)

• Mod. 410 with grapple BKP 10 (1,000 m opening) + rotator BKR 10 (360° continuous rotation)

• Mod. 525 with grapple BKP 10 S (1,050 m opening) + rotator BKR 35 (360° continuous rotation)

• Mod. 680 with grapple BKP 12 (1,20 m opening) + rotator BKR 50 (360° continuous rotation)




PALMS 700 PALMS 840


Max. reach (m) 7 8,40






PRICE € €

PALMS 840

STANDARD EQUIPMENT• Operated with tractor oil

• Turret slewing with 4-cylinder rack system in oil bath

• Individually controlled fold-down hydraulic outriggers

• L-folding boom (Mod. 700 with single hydraulic extension - Mod. 840 with double hydraulic

extension)

• Grapple BKP 13 (1.30 m opening) + rotator BKR 50 (360° continuous rotation)


• Servo-hydraulic controls


€

Heat exchanger

for PALMS 525 - 680 € for PALMS 700 - 840 €

Independent hydraulic system, piston pump, large oil reservoir, oil.

for PALMS 680 - 700 - 840 €

Movable pump and oil reservoir kit

for PALMS 525 €

58 GRAPPLES AND ROTATORS - www.bernardimacchine.it

HYDRAULIC ROTATORSHYDRAULIC GRAPPLES

TYPE WEIGHT (kg)

AREA (m)2

CAPACITY (kg)

N° CYLIN-DERS MAX. PRESSURE (bar) A

(mm)B

(mm)C

(mm)D

(mm)L

(mm)E

(mm) PRICE

BKP 10 54 0,15 500 1 150 70 437 600 1000 330 435 €

BKP 10 S 65 0,15 1000 1 175 70 437 600 1000 340 435 €

BKP 12 78 0,21 1500 1 175 85 455 680 1200 360 550 €

BKP 13 120 0,23 2000 1 200 120 545 730 1300 425 590 €

BKP 15 195 0,28 3000 1 200 110 600 800 1500 500 660 €

BKP 16 230 0,33 3100 1 200 110 630 840 1620 505 690 €

BKP 16 S 185 0,28 3500 2 230 100 570 660 1600 488 - €

BKP 18 S 235 0,35 5000 2 230 130 570 625 1800 526 - €

BKP 20 S 260 0,40 5000 2 230 150 640 640 2050 526 - €

BKP 15

BKP 12

lock valve standard issue on all models

GRAPPLE FEATURES

• All grapples are made with high-strength steels (HARDOX and DOMEX 700)

• Large pins and bushes

• All joints are machined on machining centres following welding

• All grease nipples are protected and easy to reach

59www.bernardimacchine.it - GRAPPLES AND ROTATORS

HYDRAULIC ROTATORS

TYPE WEIGHT (kg)

CAPACITY (kg)

MAX.PRESSURE ROTATION TORQUE

(Nm)GRAPPLEFLANGE

A (mm)

B (mm)

C (mm)

D (mm)

E (mm) PRICE

BKR 35 F 22 3500 200 360° cont. 720 4 fori Ø17inter. Ø140 25 73 - - 35 €

BKR 50 F 28 5000 200 360° cont. 1000 4 fori Ø17inter. Ø140 25 73 - - 40 €

BKR 65 F 43 6000 200 360° cont. 1150 6 holes Ø17centre-to-centre Ø173 35 130,5 80,5 42 40 €

BKR 110 F 53 11000 200 360° cont. 16006 holes Ø17

centre-to-centre Ø173

35 130,5 80,5 42 45 €

BKR 120 F 68 12000 250 360° cont. 28006 holes Ø17


45 170 100,5 58 55 €

BKR 160 F 71 16000 250 360° cont. 34006 holes Ø17


45 170 100,5 58 55 €

BKR 160/6 F 79 16000 250 360° cont. 3400 6 holes Ø17centre-to-centre Ø173 45 170 100,5 58 55 €

EXTRA CHARGE

MOUNTING ON OUR GRAPPLES INCLUDING 2 HYDRAULIC HOSES €

ROTATOR COUPLER FOR EXCAVATOR ASK FOR QUOTE

TYPE WEIGHT (kg)

CAPACITY (kg)

MAX.PRESSURE ROTATION TORQUE

(Nm)A

(mm)B

(mm)C

(mm)D

(mm)E

(mm)F

(mm) PRICE

BKR 10 10 1000 200 360° cont. 450 25 45 30 39,5 20 20 €

BKR 35 17 3500 200 360° cont. 700 25 59 29 49,5 25 25 €

BKR 50 21 5000 200 360° cont. 1000 25 73 30 59 30 30 €

BKR 65 27 5500 200 360° cont. 1150 30 73 35 69 30 33 €

EXTRA CHARGE

MOUNTING ON OUR GRAPPLES INCLUDING 2 HYDRAULIC HOSES, BUSH AND PIN €

ROTATOR COUPLER FOR EXCAVATOR ASK FOR QUOTE

BKR 35

BKR 65 F

B A

C

F

D

E

B

C

D

E

40 mm

A

60 THREE-POINT HITCH TRANSPORT BOX ATTACHMENTS - www.bernardimacchine.it

THREE-POINT HITCH TRANSPORT BOX ATTACHMENTS

TYPE DIMENSIONS (cm) CAPACITY (kg) WEIGHT (kg) HITCH SPECIFICATIONS PRICE SIDE EXTENSIONS(35 cm)

PCH 140x20 140x100 2000 302 I., II. € €

PCH 160x20 160x100 2000 312 I., II. € €

PCH 180x20 180x100 2000 322 I., II. € €

PCH 200x20 200x100 2000 332 I., II. € €

PCH 220x30 220x125 3000 417 II., III. € €

SUITABLE FOR CARRYING IMPLEMENTS AND MATERIALS IN GENERAL.ITS REINFORCED FRAME MEANS IT CAN BE USED AS A MECHANICAL SHOVEL FOR LOADING/UNLOADING.

HIGH-STRENGTH STEEL FRAME AND HYDRAULIC CYLINDERFOR TIPPING PLUS RETURN SPRING.

reinforced stanchions wear-resistant "HARDOX" edge

hitch category I, II

high-strengthsteel frame

top-hinged side

61www.bernardimacchine.it - GRAPPLE ON THREE-POINT HITCH

GRAPPLE ON THREE-POINT HITCH

TYPE WEIGHT (kg)

GRAPPLE OPENING(mm)

GRAPPLE REACH(mm) SIDE SHIFT WIDTH

(mm)HEIGHT(mm)

LENGTH(mm) PRICE

BKP 2200 335 2200 1280 ± 45° 1520 900 1600 €

TECHNICAL FEATURES• Tractor three-point hitch grapple

• 40° RH + 40° LH tilting

• Suitable for clearing even very large logs

• Double-acting cylinders operated with tractor oil.

BKP 2200

3-point hitch category II.

double-acting cylinder for grapple opening/closing(clamping force at 200 bar: 60 kN)

double-acting cylinderfor side shift +/- 45°

62 FORESTRY WINCHES - www.bernardimacchine.it

MECHANICAL FORESTRY WINCHES

TYPE PULL FORCE (kN) BRAKING FORCE (kN) PULL SPEED (m/s) MAX. CABLE LENGTH (m) RECOMMENDED

CABLE WIDTH (mm) H W/OUT SCREEN (mm) H W/ SCREEN (mm) WEIGHT W/OUT CABLE (kg) 3-POINT HITCH CAT. TRACTOR POWER (HP) PRICE

(without rope)

BK300 30 35 0,90 Ø8/75 Ø 8 1010 1030 2050 181 I. 15 - 35 €

BK350 35 45 0,95 Ø10/80 - Ø9/90 - Ø8/105 Ø 10 standard Ø 9 compacted 1200 1100 1800 224 I. 35 €

BK400 40 50 0,95 Ø11/90 - Ø10/100 - Ø9/120 Ø 10 standardØ 9 compacted 1415 1230 2000 304 I.,II. 50 €

BK400 R 40 50 0,70 Ø11/90 - Ø10/100 - Ø9/120 Ø 10 standardØ 9 compacted 1415 1230 2000 322 I.,II. 40 €



BK700 R 70 80 0,70 Ø12/100 - Ø11/130 Ø 12 standardØ 11 compacted 1620 1650 2300 540 II. 60 €

STANDARD EQUIPMENT• Manually controlled clutch engagement and brake release

• Automatic adjustable band braking

• Upper pulley

• Lower pulley (except for BK 3000)

• Tool box

• Chainsaw holder

• Axe carrier

• Patented fairlead (except for BK 300-350)

• Mesh screen

• Disk clutch

• Support leg

• Tow hook (not type approved)

• Skidding plate

• Standard gearbox for BK 400 R - 500 R - 700 R

Accessories see pages 70 - 71 - 72 - 73.

good distance betwe-en drum and upper pulley

mesh screen

axe carrier

loweridle pulley

tow hook - nottype approved

63www.bernardimacchine.it - FORESTRY WINCHES

TYPE PULL FORCE (kN) BRAKING FORCE (kN) PULL SPEED (m/s) MAX. CABLE LENGTH (m) RECOMMENDED


(without rope)

BK300 30 35 0,90 Ø8/75 Ø 8 1010 1030 2050 181 I. 15 - 35 €

BK350 35 45 0,95 Ø10/80 - Ø9/90 - Ø8/105 Ø 10 standard Ø 9 compacted 1200 1100 1800 224 I. 35 €





BK700 R 70 80 0,70 Ø12/100 - Ø11/130 Ø 12 standardØ 11 compacted 1620 1650 2300 540 II. 60 €

brake adjustment with drum not in gear

chainsaw holder

automatically engaged brake control lever

clutch control lever

tool box

3-point hitchcat. I, II.

PTO shaft support

gearbox

brake and clutch

sturdy drum

64

ELECTRO-HYDRAULIC FORESTRY WINCHES

FORESTRY WINCHES - www.bernardimacchine.it

TYPE PULL FORCE (kN) BRAKING FORCE (kN) PULL SPEED(m/s) MAX. CABLE LENGTH (m) RECOMMENDED


(without rope)

BK500 EH 50 60 0,70 Ø11/90 - Ø10/100 - Ø9/120 Ø 11 standard Ø 10 compacted 1515 1430 2100 344 I.,II. 50 €

BK750 EH 75 85 0,70 Ø12/100 - Ø11/130 Ø 12 standard Ø 11 compacted 1620 1650 2300 540 II. 70 €

BK910 EH 90 100 0,70 Ø14/90 - Ø12/130 Ø 14 standardØ 12 compacted 1820 1620 2320 641 II. 80 €


good distance between drum and upper pulley

tow hook - not type approved

chain anchorpoints

lower idlepulley

STANDARD EQUIPMENT• PTO-driven electro-hydraulic power pack

• Electric control station for engaging clutch and releasing brake with 5m-long cable


• Upper and lower pulley

• Tool boxes

• Chainsaw holder

• Axe carrier

• Patented fairlead

• Mesh screen

• Disk clutch

• Support leg


• Skidding plate


TYPE PULL FORCE (kN) BRAKING FORCE (kN) PULL SPEED(m/s) MAX. CABLE LENGTH (m) RECOMMENDED


(without rope)

BK500 EH 50 60 0,70 Ø11/90 - Ø10/100 - Ø9/120 Ø 11 standard Ø 10 compacted 1515 1430 2100 344 I.,II. 50 €

BK750 EH 75 85 0,70 Ø12/100 - Ø11/130 Ø 12 standard Ø 11 compacted 1620 1650 2300 540 II. 70 €

BK910 EH 90 100 0,70 Ø14/90 - Ø12/130 Ø 14 standardØ 12 compacted 1820 1620 2320 641 II. 80 €

brake adjustment with drumnot in gear

chainsaw holder

brake release regulator

electro-hydraulic power pack

gearbox PTO shaft support

axe carrier

brake and clutchsturdy drum

controlstation cable

tool box

brake controlcylinder

3-point hitchcat. I, II


FORESTRY WINCH FOR FRONT LIFT

BK 500 EHF

Pull force (kN) 50

Braking force (kN) 62,5

Pull speed (m/s) 0,7

Max. cable length (m) Ø11/90 - Ø10/100 - Ø9/120

Recommended cable (mm) Ø 11 standardØ 10 compacted

Width (mm) 1520

Height without screen (mm) 1750

Height with guard (mm) 2400

Weight without cable (kg) 425

3-point hitch category I.,II.

Recommended tractor power (HP) 50/70

PRICE (without rope) €


• Electric control station for engaging clutch and releasing brake with 5m- long cable



• Tool boxes

• Chainsaw holder

• Axe carrier


• Mesh screen

• Disk clutch

• Support leg


• Skidding plate

• Gearbox with dual PTO for front and rear use


Dual PTO for:- front use 1000 rpm left- rear use 540 rpm right


FORESTRY WINCHES WITH FOLDING SKIDDING PLATE

BK 750 EHP BK 910 EHP

Pull force (kN) 75 90

Braking force (kN) 85 110

Pull speed (m/s) 0,7 0,7

Max. cable length (m) Ø12/100 - Ø11/130 Ø11/150 - Ø12/130 - Ø14/90

Recommended cable (mm) Ø 11 compacted Ø 12 compacted

Width (mm) 1820 2020

Height without screen (mm) 1650 1650

Height with guard (mm) 2400 2400

Weight without cable 770 840

3-point hitch category II. II.,III.

Recommended tractor power (HP) 70/100 90/130

PRICE (without rope) € €


hydraulic payout

folding skidding plate operatedhydraulically with tractor oil


• Electric control station for engaging clutch and releasing brake with 5m- long cable



• Tool boxes

• Chainsaw holder

• Axe carrier


• Mesh screen

• Disk clutch

• Support leg


• Folding skidding plate

• Hydraulic payout


HYDROSTATIC WINCH

TYPE PULL FORCE (kN) BAND BRAKINGFORCE (kN)

PULL SPEED (m/s) at 95 (l/min)

MAX. CABLE LENGTH (m)

EMPTY DRUM DIAME-TER (mm) WIDTH (mm) H W/OUT SCREEN (mm) H W/ SCREEN (mm) WEIGHT W/OUT CABLE

(kg) 3-POINT HITCH CAT TRACTOR POWER (HP) PRICE(without rope)

HS 8000 low gear 90high gear 21 30 low gear 0 ÷ 0,4

high gear 0 ÷ 1,7215 (Ø 12)460 (Ø 8) Ø 280 1800 1800 2000 993 II 80 €

GENERAL FEATURES • Hydrostatic winch with three-point tractor hitch,

operation via variable-displacement pump and motor

• Professional fairlead

• Electro-hydraulic proportional controls for both reel-in and payout

• Payout control valve (120 l/min)

• Wet multi-plate negative brake

• Electro-hydraulically engaged two-speed gearbox

• Electro-hydraulic control to put the drum out of gear

• Band brake for manually adjusted free-wheel payout

• Planetary winch with gears totally enclosed in oil bath

drum with manual payout and hydraulic reel-in for cableway with load-bearing cable (optional extra)

idle pulley

chain anchor points

frame made entirely from DOMEX 700

DOMEX 700

UNIT FOR USE AS:- SKIDDING WINCH- STATIONARY WINCH- CABLEWAY (max. 500 m)

HS 8000MulTIspeed



TYPE PULL FORCE (kN) BAND BRAKINGFORCE (kN)

PULL SPEED (m/s) at 95 (l/min)

MAX. CABLE LENGTH (m)

EMPTY DRUM DIAME-TER (mm) WIDTH (mm) H W/OUT SCREEN (mm) H W/ SCREEN (mm) WEIGHT W/OUT CABLE

(kg) 3-POINT HITCH CAT TRACTOR POWER (HP) PRICE(without rope)

HS 8000 low gear 90high gear 21 30 low gear 0 ÷ 0,4

high gear 0 ÷ 1,7215 (Ø 12)460 (Ø 8) Ø 280 1800 1800 2000 993 II 80 €

oil filter

band brake for manually adjustedfree-wheel payout

swivel-head fairlead hydraulic motor serving the following functions:- cable payout with drum out of gear- brake for cable tension during reel-in

heatexchanger

oil reservoir

hydraulicallyengaged/

disengaged clutchto put winch

out of gear

hydraulic motor

movable third point

brake valve

tool box

gearbox additional pump variable-displacement pump

tool box

proportional electric controls with3m-long cable, provision

for remote control

electro-hydrauliccable payout

control


FORESTRY WINCH ACCESSORIES

Swivel hookmod. BK 300/350/400

cod. 85.2000.025 €

mod. BK 500/700 R

cod. 85.2000.028 €

mod. BK 750 EH/910 EH

cod. 85.2000.050 €

G100 cable slider

cod. 85.2000.510 €

Slider hook

for cables Ø 8-9-10-11-12

cod. 85.2212.000 €

for cables Ø 13-14 - 16

cod. 85.2216.000 €

STANDARD ROPE Ø (mm) BREAKING STRENGTH (N/mm2) WEIGHT (kg/m) PRICEper metre

8 5.140 0,263 €

10 8.040 0,407 €

11 9.720 0,472 €

12 11.600 0,578 €

14 16.100 0,820 €

COMPACTED ROPE Ø (mm) BREAKING STRENGTH (N/mm2) WEIGHT (kg/m) PRICEper metre

9 9.830 0,370 €

10 11.700 0,550 €

11 13.850 0,650 €

12 16.150 0,750 €

G80 cable slider

cod. 85.2000.500 €

Flat grab hookmod. BK 300/350/400/500/700 R

cod. 85.2000.600 €

Heavy grab hookmod. BK 750 EH/ 910 EH

cod. 85.2113.008 €

Swivel keyholefor cables Ø 8 -10

cod. 85.2000.571 €

for cables Ø 11-14

cod. 85.2000.581 €

Sling hookmod. BK 300/350

cod. 85.2000.205 €

mod. BK 400/500

cod. 85.2000.235 €

mod. BK 700 R

cod. 85.2000.265 €


G80 logging chainchain 2.0 m long 7 mm thickcapacity 3250 kg

cod. 85.3007.020 €

chain 2.5 m long 8 mm thickcapacity 4500 kg

cod. 85.3008.024 €


cod. 85.3008.028 €

Manual brake release lever,on EH models

€

G80 swivel keyhole cable slider

cod. 85.2000.530 €

G100 swivel keyhole cable slider

cod. 85.2000.540 €

G100 logging chain


cod. 85.3008.025 €


cod. 85.3008.030 €

Cable pressure rollers

€

Hydraulic payout,on EH models

€

Kit (separate)

€

Cable CHOKER

cable Ø 10 L 2500/3000

cod. 85.1500.096 €

cable Ø 11 L 2500/3000

cod. 85.1500.100 €

cable Ø 12 L 2500/3000

cod. 85.1500.104 €

Accelerator kit operatedvia remote control, on EH models

cod. 85.0100.008 €

PTO shaft

20/25 HP L700

cod. 28.0020.035 €

40 HP L700

cod. 28.0040.035 €

50 HP L700

cod. 28.0050.030 €

60 HP L700

cod. 28.0060.030 €

Cable slider with pulley

cod. 85.2000.520 €

TERRA remote control kit,on EH models

cod. 85.0100.006 €

ELCA remote control kit,on EH models

cod. 85.0100.030 €


FORESTRY WINCH ACCESSORIES

PULLEY TYPE ITEM CODE CAPACITY (kg) CABLE Ø (mm) WEIGHT (kg) PRICE

SCISSOR-TYPE OPENING PULLEY

85.5000.590 5000 max 12 5,9 €

85.5000.600 10.000 max 16 7,30 €


AUTOMATIC RELEASE PULLEY

76.9530.015 10.000 max 12 5,3 €


OPENING PULLEY

85.5000.700 10.000 max 12 6,5 €

85.5000.750 16.000 max 14 6,5 €


LIGHT ALLOY OPENING PULLEY

85.5000.805 10.000 max 14 2,4 €

85.5000.815 15.000 max 16 3,9 €


SINGLE SIDE OPENING PULLEY

85.5000.630 3000 max 9 2,2 €

85.5000.645 4500 max 12 3,8 €

85.5000.660 6000 max 14 6,5 €

85.5000.680 8000 max 18 14,0 €


LOOPED STROPS ITEM CODE CAPACITY (kg) 100% (kg) 80% (kg) 200% (kg) PRICE

Belt 2 mt 85.1300.040 1000 1000 800 2000 €

Belt 2,5 mt 85.1300.055 1000 1000 800 2000 €

Belt 2 mt 85.1300.205 2000 2000 1600 4000 €

Belt 2,5 mt 85.1300.255 2000 2000 1600 4000 €

Belt 2 mt 85.1300.305 3000 3000 2400 6000 €

Belt 3 mt 85.1300.355 3000 3000 2400 6000 €

Belt 2 mt 85.1300.405 4000 4000 3200 8000 €

Belt 3 mt 85.1300.455 4000 4000 3200 8000 €

Belt 2 mt 85.1300.505 5000 5000 4000 10.000 €

Belt 3 mt 85.1300.555 5000 5000 4000 10.000 €

Belt 2 mt 85.1300.605 6000 6000 4600 12.000 €

Belt 3 mt 85.1300.655 6000 6000 4600 12.000 €

Belt 2 mt 85.1300.705 8000 8000 6400 16.000 €

Belt 3 mt 85.1300.755 8000 8000 6400 16.000 €

100% kg 80% kg 200% kg

CARRIAGE KIT FOR CABLEWAY capacity 1500 kg

SYNTHETIC FIBRE LOOPED STROPS

DRUM KIT for manual payout and hydraulicrecovery of load-bearing cable(cable not included)

for mod. BK 910 EH €

for mod. HS 8000 €

• upper station with locking cylinder and

10m hose

• lower station with locking cylinder and 10m hose

• articulated cable support

• hydraulic hand pump kit

• tapered hook and ring carrier chain

Max. capacity (kg) 1500

Compacted load-bearing cable (mm) Ø12/14

Compacted pulling cable (mm) Ø7/8

PRICE €

RING FOR ATTACHING CHAIN OR CHOKER €

74

LOG SPLITTER SPART 80

LOG SPLITTERS - www.bernardimacchine.it

TYPE OPERATION SPLITTING FORCE (t/bar)

FOOTPRINT (mm)

WEIGHT(kg)

CYLINDER STROKE(mm)

SPLITTING SPEEDDOWN - UP (cm/s) PRICE

SPART 80 E230 el. motor HP 3single pump 8 - 210 460x560x1170 114 500 3,7 - 14,3 €

SPART 80 E230 PD el. motor HP 3dual pump 10 - 250 460x560x1170 115 500 8 - 10 €

SPART 80 E400 el. motor HP 3single pump 8 - 210 460x560x1170 114 500 3,7 - 14,3 €

SPART 80 PFtractor PTOfixed pump

3-point hitch8 - 210 460x560x1170 130 500 4,3 - 20

PTO max 350 g/min €

ACCESSORIES ON REQUEST

CROSS BLADE €

1020 mm

740 mm

550 mm

STANDARD EQUIPMENT• Splitting force 8 tonnes

• 3-position adjustable table

• Accident-prevention levers

• DELRIN sliders

• Wedge blade

• Hydraulic oil specifically designed for high performance

VERSION WITH DUAL PUMP 10-TONNE SPLITTING FORCE

Removablewedge blade

75

1410 mm

1090 mm

640 mm


www.bernardimacchine.it - LOG SPLITTERS


FOOTPRINT (mm)

WEIGHT(kg)

CYLINDER STROKE (mm)


SPART 120 G tractor driven with movable pump 12 - 250 675x1100x1150 227 600 6,2 - 20


SPART 120 HG tractor oil 12 - 250 675x1100x1120 213 600 €

SPART 120 EG230/400 PD

el. motor HP 3dual pump 12 - 250 675x1100x1120 235 600 9 - 10 €

combined with movable pump 12 - 250 675x1100x1120 247 600 6,2 - 20 €

SPART 120 EG 400

el. motor HP 4single pump 12 - 250 675x1100x1120 235 600 5 - 20 €

combined with movable pump 12 - 250 675x1100x1120 247 600 6,2 - 20 €

SPART 120 BG petrol engineHP 6,5 dual pump 12 - 250 675x1200x1150 246 600 9 - 10 €


CROSS BLADE €

TABLE EXTENSION €


• Double 3-position adjustable swivel table

• Accident-prevention levers

• DELRIN sliders

• 3-point hitch

• Wedge blade


76



450 mm

700 mm


• Safety bar

• 3-point hitch

• Splitting height 450/700 mm


• Brass sliders

• Operated with accident-prevention levers

• Oil filter


• High-capacity oil reservoir column

• Anti-burst hydraulic hoses

• Drawbar and wheels for electric models


FOOTPRINT (mm)

WEIGHT(kg)

CYLINDER STROKE (mm)


SPART 130tractor PTO driven

with movable pump

13 - 250 780x1150x2280 228 650 14,4 - 28,5PTO max 350 g/min €

SPART 130 H tractor oil 13 - 250 780x1150x2280 205 650 €

SPART 130 E230/400

el. motor HP3dual pump 13 - 250 780x1150x2280 245 650 9,4 - 11,8 €

combined with movable pump 13 - 250 780x1150x2280 270 650 14,4 - 28,5


SPART 130 B6,5 HP petrol

enginedual pump

13 - 250 780x1150x2280 240 650 9,4 - 11,8 €


CROSS BLADE €

TABLE EXTENSION €

DRAWBAR €

PAIR OF WHEELS €

77



450 mm

700 mm

1150 mm


• Splitting blade dual speed

• Safety bar

• Splitting blade downstroke and upstroke height adjustment

• 1 side log support

• 3-point hitch

• Splitting height 450/700/1200 mm


• Brass sliders


• Lowering option for cylinder

• High-capacity oil reservoir

• Oil filter

• Reinforced base to support logs




TYPE OPERATION SPLITTING FORCE (t/bar) FOOTPRINT (mm) WEIGHT

(kg)CYLINDER STROKE

(mm)SPLITTING SPEEDDOWN - UP (cm/s) PRICE


with movable pump

15 - 250 780x1150x2750/2070 288 1050 9,3÷26 - 10,5PTO max 350 g/min €

SPART 150 H tractor oil 15 - 250 780x1150x2750/2070 250 1050 €

SPART 150 E230/400

el. motor HP 3dual pump 15 - 250 780x1150x2750/2070 300 1050 6,7÷18,7 - 6,5 €

combined with movable pump 15 - 250 780x1150x2750/2070 330 1050 9,3÷26 - 10,5


SPART 150 E400

el. motor HP 6.4 single pump 15 - 250 780x1150x2750/2070 305 1050 5,6÷15,6 - 5,4 €

combined with movable pump 15 - 250 780x1150x2750/2070 335 1050 9,3÷26 - 10,5


SPART 150 B petrol engineHP 6.5 dual pump 15 - 250 780x1150x2750/2070 303 1050 6,7÷18,7 - 6,5 €


CROSS BLADE €

TABLE EXTENSION €

DRAWBAR €

PAIR OF WHEELS €

MECHANICAL LOADER €

HYDRAULIC LOADER €

FIXED PUMP €

78

LOG SPLITTER SPART 170 LOG SPLITTER SPART 210



• Splitting blade dual speed

• Safety bar

• Splitting blade downstroke and upstroke height adjustment

• Double log support

• 3-point hitch


• Pull-out table

• Bronze sliders



• High-capacity oil reservoir

• Oil filter


• Oil specifically designed for high performance



600 mm

1110 mm

pull-out table


(kg)CYLINDER STROKE



with movable pump

17 - 250 870x1200x2620/1900 344 1050 8,4÷17,5 - 11,6PTO max 350 g/min €

SPART 170 H tractor oil 17 - 250 870x1200x2620/1900 305 1050 - €

SPART 170 E 400

el. motor HP 6.4single pump 17 - 250 870x1200x2620/1900 360 1050 5,4÷11,2 - 6,3 €

combined with movable pump 17 - 250 870x1200x2620/1900 390 1050 8,4÷17,5 - 11,6


CROSS BLADE €

TABLE EXTENSION €

DRAWBAR €

PAIR OF WHEELS €

MECHANICAL LOADER €

HYDRAULIC LOADER €

FIXED PUMP €

79

LOG SPLITTER SPART 170 LOG SPLITTER SPART 210



• Splitting blade automatic dual speed

• Safety bar

• Splitting blade downstroke and upstroke height adjustment .

• 3-point hitch


• Pull-out table

• Bronze sliders


• Hydraulic loader


• High-capacity oil reservoir made from DOMEX 700

• Oil filter


• Oil specifically designed for high performance


• Drawbar and wheels for electric models.


(kg)CYLINDER STROKE


SPART 210 tractor PTOwith fixed pump 21 - 250 870x1300x2620/1900 458 1050 17,5÷7,5


SPART 210 H tractor oil 21 - 250 870x1300x2620/1900 402 1050 - €

SPART 210 E400

el. motor HP 7.5single pump 21 - 250 870x1300x2620/1900 471 1050 13,1 - 6,7 €

combined with fixed pump 21 - 250 870x1300x2620/1900 520 1050 17,5÷7,5



CROSS BLADE €

TABLE EXTENSION €

DRAWBAR €

PAIR OF WHEELS €

MANUALLY CONTROLLED HYDRAULIC WINCH €

REMOTE-CONTROLLED HYDRAULIC WINCH €

winch (optional extra)

hydraulic loader

dual speedautomatic valve

HYDRAULIC LIFT - www.bernardimacchine.it 80

HYDRAULIC LIFT FOR TRANSPORTERS

TYPE CAPACITY (kg)

WEIGHT (kg) CYLINDERS

CAN BE MOUNTED ON FOLLOWING MACHINERYPRICE

ANTONIO CARRARO CARON GOLDONI

HL 12 300 90 1 Tigrecar 3100Tigrecar 4300 - Transcar 25-33 RS - SN €

HL 25 500 140 2Tigrecar 5500 PC/PLTigrecar 6500 PC/PLTigrecar 8400 PC/PL

200/300 series500/600 series

Transcar sincro40 - 60 - 70 - SN

Transcar sincro40 - 60 - 70 - RS

€

EXTRA CHARGE

TYPE APPROVAL FOR AGRICULTURAL VEHICLES (with garden tractor on our premises) net €

TYPE APPROVAL FOR BACKHOE LOADER ASK FOR QUOTE

PTO SHAFT L=1200 mm HP40 item cod. 28.0040.200 €

MOUNTING (with garden tractor on our premises net €

SECOND CYLINDER FOR HL12 TYPE (only for A.C. TIGRECAR 3100/4300) €

HL 25

www.bernardimacchine.it - HYDRAULIC LIFT 81

RECOMMENDED ATTACHMENTS ON HYDRAULIC LIFT

FORESTRY WINCH

FORESTRY LOADER

LOG SPLITTERS

recommended models:

BK300 -BK 350 - BK400 - BK400 R see pages 62 - 63

recommended models:

C350 Z - C450 Z see pages 42 - 43

recommended models:

SPART 80 see page 74




TERMS AND CONDITIONS OF SALEOrders can only be accepted in accordance with the following terms:

1 This price list cancels and supersedes all previous lists.

2 Prices given on the price list do not include VAT and are given as an approximate guide only; the actual prices will be those effective at the time of delivery.

3 Specifications, weights and measurements given on the price list are meant as a rough guide only.

The Manufacturer reserves the right to make changes to the design and manufacture of its machinery at any time without prior notice.

4 The wheels featured on the price list are given as an approximate guide only and may be changed by the Manufacturer based on availability.

5 Please understand that machinery is sold on an ex works basis from the Manufacturer's facility.

6 The delivery dates shall be those agreed on except in the case of force majeure.

7 Shipments will always be made using the most cost-effective and reliable means and will be carried out on your behalf. Note that goods are transported at

your risk, even when sent on a carriage paid basis.

8 You can only a submit claim once you have received the goods and, in the event the claim is accepted, no compensation will be paid for damages, lost

earnings, etc..

9 The warranty covers the machinery for a period of 12 months from the date of delivery. Claims must be addressed to the Manufacturer, who has sole

discretion over their assessment.

Parts that are found to be defective will be replaced free of charge and you will be charged just for transport.

The warranty becomes void if defects are the result of poor use of the machinery owing to the user's inexperience, carelessness or negligence.

Warranty coverage of tyres is subject to assessment by the supplier. Used and retreaded wheels are not covered by the warranty.

10 In the event payment is not received by the agreed due date, you will be charged interest on all monies due and payable at the current bank rate.

11 When ordering equipment in a non-standard size, the price for the difference will be determined on a case-by-case basis and you will be asked to put

down a 25% deposit when you submit the order.

12 In the event of a complaint, the judicial authority of Treviso (Autorità Giudiziaria di Treviso), Italy, shall be the sole authority to have jurisdiction.

IMPORTANT NOTEDIRECTIONS FOR ORDERING DRIVE AXLES

Please provide the following data in writing when submitting your order:

- make and type of tractor and rear wheels;

- rpm of PTO synchronized with low gears over a travelling distance of 10 or 20 metres;

- PTO direction of rotation;

- height of tow hook.

In the absence of confirmation in writing, the Manufacturer cannot be held responsible for errors arising out of a misunderstanding over the

phone.

When you receive the trailer, make sure it does not push or lag behind with respect to the tractor.

ONLY USE THE DRIVE WHERE NECESSARY AND IN LOW GEAR, ON UNSURFACED ROADS ONLY, NEVER ON ASPHALT OR CEMENT.

The Manufacturer is not responsible for wear of tyres or other mechanical parts as a result of the trailer's unsuitability for the tractor.

Furthermore, the Manufacturer cannot be held responsible for the accuracy of the technical specifications provided by the tractor's manufacturer.

BERNARDI sas di Bernardi R. e G. & C. Via Sartori, 98 - 31053 Pieve di Soligo (TV) - ITALYTel. +39.0438.82248 - Fax +39.0438.82981 - www.bernardimacchine.it - [email protected]

AGRICULTURAL & FORESTAL MACHINERY

netech

.it

catalogo 2012 inglese

Documents

main road ss

venice signs

conegliano veneto

venice exit

manufacturing farm trailers

wheeled farm trailers

venezia exit

a4 motorway