catalog laser marking - interpack€¦ · laser source ytterbium fiber laser, pulsed, air-cooled cw...

Diode-Pumped Ytterbium Fiber Lasers

Laser Marking

Made in Germany

Edition 5.1

2

The basics

For current data refer to websitewww.cab.de/en/marking-laser.

All information on scopes of delivery, design and technical specifications correspond to the date of printing. Subject to change.

Using marking lasers is economic, when it comes to precisely and durably mark smallest components up to larger parts. The benefits of laser marking are manifold. The most significant are:

• Focusing in smallest spaces, as laser beams allow enormous energies to be bundled.

• Flexibility, as both metal and plastic parts can be marked. Even in places that are difficult to access.

• High marking speed, as strongly focused light does not have to overcome mechanical resistance.

• No mechanical force on components, as heat energy is used without direct contact.

• High durability, as laser marking is insensitive to acids or alkalis, UV radiation, heat and abrasion.

Marking lasers of the FL+ series are designed for a wide range of applications. The process allows stationary as well as on-the-fly marking on metal or plastic parts in various industries:

• Medtech: For example machine-readable codes on medical or surgical instruments. According to the guidelines for “Unique Device Identification“.

• Aerospace: Datamatrix codes on all strategic component parts, such as turbine components.

• Electronics: For quality assurance with permanent codes and alpha-numeric characters on PCBs, terminals, switches and others.

• Automotive: Laser marked codes for traceability of automotive components and assemblies. Allows marking contents including production data, date as well as serial, part and lot numbers, and others.

3

Marking laser FL+ – Applications

cab FL+ marking lasers are primarily used for the processing of metal and plastic parts. Different methods are commonly used depending on the requirement and material.

EngravingAblation of the material through evaporation with very high energy density that produces a deep marking with contour sharpness. An additional color change depending on the alloy or chemical composition improves the readability of the marking contents.

Surface removalThe laser marker removes top coating to show a different-colored material underneath. Examples: top coatings or anodizing layers, laser label material or day and night design on control buttons.

AnnealingIs mainly used with high-alloy, stainless steels and with titanium. Laser annealing creates a color change when the material is selectively exposed to heat and oxygen without noticeable material ablation.

Color changeIs used for the processing of plastic material. The color change depends on the chemical composition of the material and additives. Destroying color pigments and creating gas bubbles within the material produces light marks. Carbonization produces dark marks.

FoamingThe laser beam melts the workpiece surface locally. Small gas bubbles increase the volume of the molten material producing a raised marking. Small gas bubbles within the material diffusely reflect the light.

QR codes for traceability

Automotive components

Plastic ident clips Cable tags

Cast parts

Aluminum nameplates

Consumption meters Size allocation in medical technology

Medtech Traceability in sterilization processes

4

Marking laser FL+

Different plano-spherical lenses allow the lasers to mark in a field of 69x69 up to 290x290 mm. The lasers are used to mark on plastic, metal and color-coated surfaces.

The marking lasers FL+ consist of two fiber coupled functional modules: The scan head and the control unit with integrated laser source. The scan head may be assembled in each installation position.

Control unit with integrated laser source is available in two different designs.

Precise, fast, economic

Performance and quality of a marking mainly relies on the output power and the laser beam‘s focusing.

cab marking lasers FL+ are diode-pumped, air-cooled and offer highest beam quality and pulse peak power.

An output power of the laser source of 10 up to 50 Watt is available.

Type 2 “Rack” for FL+10/20/30/50 Watt Preferably used for the integration into 19“ cabinets. Control unit and laser source are incorporated in a 19“ rack mount.

Type 1 “Tower” for FL+20/30 WattVery compact design, used both as desktop version and for the integration into housings.

2.1, 2.2, 2.3, 2.4

1.2, 1.3

5

Marking laser FL+

InterfacesFor controlling and monitoring the process flow.

Ethernet 10/100 Base for PC. The device is supplied with a fixed IP address or configured in the DHCP mode.

Ethernet 10/100 Base for peripherals. For data communication from and to end devices.

2 x RS232 C for peripherals. For data communication from and to end devices.

Digital I/O for control and monitoring. Including eight freely programmable inputs and outputs. Protective circuit according to IEC 61131-2.

Remote for switching on and monitoring the laser.

Interlock/E-Stop for the integration into external safety circuits and the connection to an external E-Stop according to performance level d.

1

2

4

5

6

7

3 +

Technical data Tower 1.2 1.3Rack 2.1 2.2 2.3 2.4

Marking laser FL+10 FL+20 FL+30 FL+50Laser source Ytterbium fiber laser, pulsed, air-cooled cw output power max. W 10 20 30 50 Pulse energy mJ 0.5 1 1 1 Wave length nm 1064 Beam quality M2 <1.8 Pulse width ns 90-120 80-120 Pulse frequency kHz 20-80 2-200 2-200 2-200 Fiber coupling m 4.5 2.5 2.5 2.5Scan head Mounting Horizontal/vertical Marking speed mm/s ~5000Pilot laser

Wave length nm 650 cw output power mW <1Electronics Processor 32 bit clock rate MHz 600 Main memory (RAM) MB 256 Data memory (Flash) MB 512 Extensions (Flash) USB memory stickDimensions and weights Tower Rack 4RU 19“Control unit HxWxD mm 312x150x410 178x420x420 weight kg 15 16Scan head HxWxD mm 110x170x330 weight kg 7

Control panelKey switch Laser source ON/OFF

Push button pilot laser ON/OFF shutter open OPEN/CLOSEIndicator emission Laser source active laser error Laser source error ready Laser source ready power Power supply ON pilot laser ON shutter open Safety lock openConnector service USB mini data memory USBOperating data FL+10 FL+20 FL+30 FL+50Operating voltage/frequency 100-240 VAC ~ 50/60 HzPower ON/OFFPower consumption standby W 65 max.W 150 175 200 250Temp./humidity operation 5-40 °C/10-85 % not condensing stock 0-60 °C/20-80 % not condensing transport –25-60 °C/20-80 % not condensingApprovals CE, FCC class A, ICE S3Performance level dLaser safety class EN60825-1 laser source Class 4 pilot laser Class 2

2

1

3

5

6

7

4+

Recommended system requirements PC

Computer IBM PC/AT compatible

Operating system Microsoft Windows 7 Professional SP1 (32/64 bit)

Processor Intel Core i3-540 or higher

Main storage Minimum 1 GB RAM, 2 GB or more recommended

Hard disc Memory requirements software 1 GB,recommended size of hard disc 40 GB or more

Drives CD-ROM/DVD drive for software installation

Interfaces Network card 10/100 Mbit for laser connection, PS2/USB interfaces for mouse/keyboard, USB 2.0 connection for dongle Options: USB 2.0 connection for storage medium, RS232 interface for cab axis systems or cab laser label marker LM+

Software cabLase Editor 5Monitor SVGA, recommended resolution 1280x1024

Remote

User I/O

6

Marking laser FL+ – Accessories

Plano-spherical lenses F-ThetaFor bundling the laser beam to focus energy on one spot. Lenses with marking fields in different sizes are available. The smaller the marking field the higher the resolution.

Mounting plateIs used to tightly screw the tower housing on a base plate or a frame design.

Laser protection windowsIs used to be built in housings or doors for monitoring the marking process. The window can be tighten bolt directly to the housing panel.

Assembly frames for laser protection windowAs an alternative, the laser protection window can be mounted with a black anodized front cover and rear side frame.

3.1 3.3 3.6 3.9Plano-spherical lens 100.1 160.1 254.1 420.1Working distance mm 141±2 202±4 302±4 541±10Marking field mm 69x69 112x112 180x180 290x290Spot diameter µm ~25 ~35 ~50 ~85=̂ Resolution dpi 1000 725 500 300

3.12 3.13Laser protection window 100x200 120x270Dimensions Height mm 128 148 Width mm 228 298 Thickness mm 3 3

3.11Mounting plate FL+TDimensions Width mm 144 Depth mm 460 Thickness mm 6

3.14 3.15Assembly frame 100x200 120x270Dimensions Height mm 128 148 Width mm 228 298 Thickness mm 2 2

290x290

180x180

541±

10

302±

4

202±

4

141±

2

112x112

69x69

Working distance Marking field

Adapter cables FL/FL+

User I/O and remote interfaces have different connector pin assignments between FL and FL+. The adapters allow the marking lasers FL+ to be connected to even older installations. The E-Stop also requires an adapted wiring.

3.1, 3.3, 3.6, 3.9

3.11

3.12, 3.13

3.14, 3.15

3.16, 3.17

3.16 3.17Adapter cable set FL-PCI/FL+ FL-TCP/FL+

Adapter cable Remote FL/FL+

Adapter cable User I/O FL-PCI/FL+ –Adapter cable User I/O FL-TCP/FL+ –

Description E-Stop

7

Overview marking laser systems

LM+ LSG+65 LSG+100E THS+Basic THS+M

1.1 Marking laser FL+T 20 W 1.2 Marking laser FL+T 30 W 2.1 Marking laser FL+R 10 W

2.2 Marking laser FL+R 20 W



3.1 Plano-spherical lens F-Theta 100.1




4.1 PC in 19“ rack mount 4RU

4.2 Monitor 19“

4.3 - 4.6

Keyboard USB

5.3 External rewinder ER 4/300 LM

5.56.7

Mobile cart

7.3 Linear axis X400

7.4 Rotary axis ZD30

7.7 Axis controller 2S

7.9 Rotary table module RTM650

7.10 Typeplate handling on request

10.110.2

Extraction and filter device AF1.1

8

Laser label marker LM+

The laser label marker allows to precisely mark and cut labels in different sizes out of continuous material without the need of additional tools.

After the marking, labels made of of laser markable foil can be separated via cutter or rewound by using an external rewinder.

Technical data 5.1 5.2Laser label marker LM+160.1 LM+254.1Working area HxWxD mm 5x160x190Positioning accuracy mm 0.2Transport speed mm/s 200Interior light LEDMaterial Die cut or continuous thickness mm 0.055-0.3 weight up to g/m2 500 width mm 25-120Label height max. mm 180

Roll outer diameter max. mm 300 core diameter mm 76 winding Outside or insideFor plano-spherical lens type 160.1 254.1Marking field mm 112x112 120x180Working distance mm 202 302Dimensions and weightHxWxD mm 520x440x802Laser protect. window HxW mm 50x100Mounting feet Ø mm 50Connector extraction Ø mm 50Weight kg 22Operating dataOperating voltage/frequency 100-240 VAC ~ 50/60 HzPower ON/OFFTemp./air humidity operation 5-40 °C/10-85 % not condensing stock 0-60 °C/20-80 % not condensing transport –25-60 °C/20-80 % not condensingLaser safety class EN60825-1 Class 1Approval CE

Cutter

5.1, 5.2

Control panelLED indicators Continuous material

Labels

Push buttons Material feed forwardsMaterial feed backwards

Cut

Switches Automatic/manualE-Stop

MonitoringSafety circuits ClosedPressure roller LockedMaterial In marking position/no materialInterfacesInterlock/E-Stop FL+

Serial RS232 C FL+ Con5External E-StopCutter

Laser label marker LM+with mobile cart, an external rewinder on the console, a column to attach a monitor and an extraction and filter device AF1.1

Accessories

External rewinder

Hose set

Mobile cart

Console

Column for monitor

5.3

5.4

5.5

5.6

5.7

9

Laser safety housing LSG+65

The laser safety housing LSG+65 offers a professional solution that allows an easy and fast marking of single workpieces and small series. The desktop version provides enough working space even for larger workpieces. The manual operation door is balanced. Keyboard and monitor may, as an option, be installed in an ergonomic way on a pivot arm.

Technical data 6.1Laser safety housing LSG+65Working area HxWxD mm 200x530x380Base plate T-slot WxD mm 495x375Pitch mm 25Z axis stroke mm 240Positioning accuracy mm 0.1Interior light LEDOperating door ManualFor plano-spherical lens type 100.1 160.1 254.1Marking field mm 69x69 112x112 180x180Working distance mm 141 202 302Workpiece height max. mm 30-270 210 110Workpiece weight max. kg 20Dimensions and weightHxWxD mm 615x675x860Laser protect. window HxW mm 200x100Mounting feet Ø mm 50Connector extraction Ø mm 50Weight kg 90Operating dataOperating voltage/frequency 100-240 VAC ~ 50/60 HzPower ON/OFFTemp./air humidity operation 5-40 °C/10-85 % not condensing stock 0-60 °C/20-80 % not condensing transport –25-60 °C/20-80 % not condensingLaser safety class EN60825-1 Class 1Approval CE

Control panel LED indicators Power

EmissionMarkingReadyError

Push buttons illuminated Control ON/OFFFocus finder ON/OFFExtraction ON/OFF

Air pressure ON/OFF

Interior light ON/OFFStart

Z axis UP/DOWNRotary axis LEFT/RIGHT

Switch E-StopKey switch Automatic/manualMonitoringSafety circuits ClosedCollective error Marking laser

ExtractionInterfacesInterlock/E-Stop FL+

Remote FL+

Digital I/O FL+

Step motor z axis, rotary axisExtraction and filter device AF1.1

6.1

Accessories

Pivot arm for monitor with keyboard tray

Rotary axis

Suction hose

Mobile cart

6.2

6.7

6.3

6.6

10

Laser safety housing LSG+100E

The laser safety housing LSG+100E offers the industrial solution that allows the marking of parts in series with the FL+ marking laser. The robust metal design provides a large working area and enough space for the integration of laser source and industrial PC into 19“ rack mounts.

Keyboard and monitor are installed in an ergonomic way on a pivot arm. The operation door opens and closes pneumatic driven.

Control panelLED indicators Power

EmissionMarkingReadyError

Push buttons illuminated Control ON/OFFFocus finder ON/OFFExtraction ON/OFF

Interior light ON/OFFStart

Z axis UP/DOWNX axis LEFT/RIGHT

Rotary axis LEFT/RIGHTOPEN/CLOSE door

Reserve

Switch E-StopKey switch Automatic/manualMonitoringSafety circuits ClosedCollective error Marking laser

ExtractionInterfacesInterlock/E-Stop FL+

Remote FL+

Digital I/O FL+

Step motor z axis, x axis, rotary axisExtraction and filter device AF1.1

Technical data 7.1 7.2Laser safety housing LSG+100E 230 V LSG+100E 120 VWorking area HxWxD mm 460x980x980Groove plate T-slot WxD mm 550x375Pitch mm 25Z axis stroke mm 440Positioning accuracy mm 0.02Repetitive accuracy mm ±0.02Traversing speed max. mm/s 60Interior light Low energy light bulbOperating door Electric driveOpening/closing time s <2For plano-spherical lens type 100.1 160.1 254.1 420.1Marking field mm 69x69 112x112 180x180 290x290Working distance mm 141 202 302 541Workpiece height max. mm 60-490 430 330 90Workpiece weight max. kg 50Dimensions and weightHxWxD mm 2280x1000x1120Laser protect. window HxW mm 100x200Mounting feet Ø mm 80Connector extraction Ø mm 50Rack mount for marking laser FL+ and PC

19“, 4RU

Weight kg 395Operating dataOper. voltage/frequency VAC/Hz 220-240/50 100-140/60Power ON/OFFTemp./air humidity operation 5-40 °C/10-85 % not condensing stock 0-60 °C/20-80 % not condensing transport –25-60 °C/20-80 % not condensingLaser safety class EN60825-1 Class 1Approval CE

7.1, 7.2

Accessories

Linear axis

Rotary axis

Axis controller

Round table module

Laser typeplate handling on request

7.3

7.4

7.7

7.9

7.10

11

Laser safety housing LSG+100E

Setup doorThe large setup door allows easy access to the laser safety housing LSG+100E. By this, jigs may comfortably be mounted on the groove plate in the well-lit working space.

Linear axis Z400Allows precise and fast focus adjustment. With buttons integrated in the control panel the linear axis is traversed in setup operation.

Turning axis ZD30 with 3-jaw chuck

7.3

7.4, 7.5

AccessoriesLinear axis X400Allows to precisely position user-specific jigs or pallet carriers with a maximum weight of 50 kg.

7.3Linear axis X400Traversing distance mm 440Positioning accuracy mm 0.02Repetitive accuracy mm ±0.02Traversing speed max. mm/s 60Dimensions HxWxD mm 110x835x200Load capacity kg 50Weight kg 16

Turning axis ZD30For marking the outline of round components. These can be manually clamped in the 3-jaw chuck.

7.4Turning axis ZD30Rotation speed U/min 0-40Operating torque Nm 12Increment min. [arcmin] 2.5Holding torque Nm 2.0Dimensions HxWxD mm 105x125x128Weight kg 3

7.53-jaw chuck ZD30

Clamping range Ø inner mm 23-76

Ø outer mm 3-76

12

Laser typeplate handling THS+

The laser typeplate handling THS+ allows to durably mark flat parts as e.g. typeplates or marker sheets made of plastics or metal.

Designed for the processing of nameplates for motors, pumps, control cabinets, and others it is used for applications in demanding industrial environments where the contents needs to be clearly legible even after years.

Two different designs are available:

Type 1 “THS+Basic”Plates or other flat parts up to a thickness of 4 mm are individually inserted into a jig, fed after start, marked and then automatically rejected.

Type 2 “THS+M”The plates are stacked in a magazine. The upper one of a stack is marked and then automatically rejected.

Technical data 8.1 9.1Laser typeplate handling THS+Basic THS+MWorking area HxWxD mm 10x120x120 –Typeplate WxH min. mm max. mm

– 40x40– 110x90

Positioning accuracy mm ±0.2Handling motor driven Linear slide MagazinePlates 0.5 mm piece 1 100For plano-spherical lens type 160.1Marking field WxH mm 112x112 110x88Working distance mm 202Thickness plate max. mm 4 0.5-1.0Workpiece weight max. kg 0.5 0.1Dimensions and weightHxWxD mm 299x176x340Laser protect. window HxW mm 100x98Connector extraction Ø mm 50Total weight kg 14Operating dataOperating voltage/frequency 110-240 VAC ~ 50/60 HzPower ON/OFFTemp./air humidity operation 5-40 °C/10-85% not condensing stock 0-60 °C/20-80% not condensing transport –25-60 °C/20-80% not condensingLaser safety class EN60825-1 Class 1Approval CE

Control panel THS+Basic THS+MPush buttons illuminated Tray OPEN/CLOSE

AutostartSynchronizing/

Manual rejection

Switch E-StopMonitoringSafety circuits ClosedLinear slide Position –Magazine – PositionTypeplate In marking positionInterfacesInterlock/E-Stop FL+

Digital I/O FL+

Extraction and filter device AF1.1

THS+Basic

THS+M

8.1 9.1

Accessories

Customer-specific jig for THS+Basic

Customer-specific magazine for THS+M

8.2

9.2

Dire

ctio

n of

tran

spor

t Corner radius R at least 1 mm

Left/right 1 mm margins not markable

Type plate THS+M

13

Extraction and filter devices AF1.1

Material processing with lasers produces toxic dust and gaseous contaminants. The extraction system protects the operator’s health and prevents the working area and lens from being contaminated, thus providing a constant laser output power.

The contaminated air of the working area is extracted by a high-power turbine and transported to the filter unit via a flexible hose. Contaminant particles, respectively dust are filtered out in the pre-filter and filter for suspended particles. Gaseous contaminants are absorbed by the active carbon filter. The cleaned air is then diverted into the environment.

The extraction and filter device AF1.1 features

• compact design, • small footprint,• simple and fast change of filter,• low sound level due to extract air silencer,• monitoring of filter saturation and motor.

Option: additional safety filter bag for rough particles and dusts

Consumables

Safety filter bag

Pre-filter

Filter for susp. particles

Active carbon filter

Option

Suction hose 10.410.3

10.7

10.5

10.6

Technical data 10.1 10.2Extraction and filter device AF1.1-230 AF1.1-120Suction capacity max. m3/h 320Vacuum max. Pa 12500Filter Separation ClassSafety filter bag

Pre-filter 96-98% M5

Filter for susp. particles ≥ 99,95% H13

Active carbon filter 10L

Dimensions and weight

Device HxWxD mm Weight approx. kg

682x355x35535

Connector extraction Ø mm 50Operating dataOperating voltage/frequency VAC/Hz 230/50 120/60Power consumption max. kW 1.2Sound level dB (A) <67Protection class IP 42Temp./air humidity operation 5-40 °C/10-85 % not condensing

stock 0-60 °C/20-80 % not condensing

transport –25-60 °C/20-80 % not condensingApproval CE

Operation panelPower ON/OFFLED indicators for Filter

Push button 1 LED indicator green

Extraction ON/OFF

Push button 2 LED indicator red

Reset

Adjusting knob Speed regulationInterfaceDigital I/O interface a Extraction ON/OFF

Operation OKCollective error

24 VDCMonitoringFilter Saturated

Motor Defective

Standard Optionally

Larger extraction devices on request

10.1, 10.2

14

Marking software cabLase

All FL+ marking lasers have installed the marking software cabLase Editor 5. Key features are:

• Graphic design of layouts• Control of marking• Monitoring marking process

• Stand-alone modecabLase supports marking without the need of a PC. Marking layouts and associated fonts are downloaded and then transferred to the laser control for further management. Allows process control and monitoring by digital signals.

• Remote host modecabLase allows to be remote controlled via serial, Ethernet or ProfiBus connection by a host control, e.g. PC/PLC. Programming commands are available to select layouts, to change marking data, for process control and monitoring.

• Remote API interfaceSpecially designed to be integrated into demanding manufacturing environments. Allows to generate objects, its parameter setting, management and processing of associated layouts and variable contents externally from a PC or via PLC.

• COM Automation Server For individual, customizable marking applications. It offers a command library with all functions of the marking software cabLase.

• Integration in ERP and MES systemscabLase offers program modules for the integration of laser marking systems into MES and ERP platforms. As member in SAP’s Printer Vendor Program cab has access to e.g. implement marking applications to the SAP data stream.

cabLase overviewSoftwareSoftware cabLase Editor 5CharactersFonts All TrueType fonts installed in Windows,

filled or as outline, laser specific single, double and triple line fonts. All fonts can be freely sca-led and „wobbled“.

Alignment Any alignment and direction of rotation, circular arc marking

Character spacing Stretching and compressingGraphicsGraphic elements Lines, circles, rectangles, polygones; Hatching

of all filled surface elements

Graphic formats PLT, DXF, BMP, JPG, PCX, WMF, EPS, TIF;All graphic elements can be scaled, moved, rotated, grouped or mirrored. Special tools are available to align the objects.

BarcodesLinear barcodes Interleaved 2/5

Code 39, Code 93Code 128

CodabarEANUPC

2D-Codes Data Matrix, ECC200, QR codeAll codes are variable in height, module width and ratio. Optionally: check digits, inverted codes

Additional featuresSerial number, time, dateVariable fieldsInsertion of graphic data out of Windows programsProgrammable laser parametersStorage of process and parameter filesControl of digital in- and outputs

Control and monitoring of additional axes, e.g. lifting, rotary and linear axes

Industry 4.0 and the Internet of Things symbolize tomorrow’s smart production. Software for users and connectivity are key technologies to be implemented. cab FL+ marking lasers are designed for the future and supplied with all necessary program and data interfaces. We will be pleased to advise you on questions about your application!

Industry 4.0

15

Part no. Device

1.2 Tower 5527530 Marking laser FL+20T

1.3 5527540 Marking laser FL+30T

2.1 Rack 5527250 Marking laser FL+10R

2.2 5527580 Marking laser FL+20R



Scope of delivery Marking laser FL+

USB software dongle cabLase Editor 5Power cable type E+F, 1,8 mPatch cable CAT 5e, 3 mAssembly instructions de/en

Part no. Accessories

3.1 5525039 Plano-spherical lens F-Theta 100.1 69x69 mm




3.11 5527237 Mounting plate FL+T

3.12 5907189 Laser protection window 100x200 mm

3.13 5906286 Laser protection window 120x270 mm

3.14 5527416 Assembly frame 100x200 mm

3.15 5527419 Assembly frame 120x270 mm

3.16 5527478 Adapter cable set FL-PCI/FL+

3.17 5527479 Adapter cable set FL-TCP/FL+

Part no. Device

4.1 5570125 PC in 19" rack mount 4RU

4.2 5570130 Monitor 19“

4.3 5901626 Standard keyboard USB de4.4 5901677 Standard keyboard USB en4.5 5901621 Keyboard with trackball USB de4.6 5901651 Keyboard with trackball USB en

Laser marking – Product range

Part no. Device

5.1 5527265 Laser label marker LM+160.1

5.2 5527485 Laser label marker LM+254.1

Scope of delivery Laser label marker LM+

Power cable type E+F, 1,8 mConnecting cable, 9/9 pole, 3 m, for Interlock/E-StopConnecting cable, 9/9 pole, 3 m, for remoteConnecting cable, 25/15 pole, 3 m, for extraction AF1Funnel for scan headGuide 1 mm for label transportGuide 2 mm for label transportCutterBlind plug for extractionJoint with throttle valve for extractionAssembly instructions de/en


5.3 5525355External rewinder ER 4/300 LM

5.4 5527655 Hose set LM+

5.5 5527585 Mobile cart

5.6 5527675 Console r/l

5.7 5527705 Column for monitor

16

Laser marking – Product range

Part no. Device

6.1 5527245 Laser safety housing LSG+65

Scope of delivery Laser safety housing LSG+65Power cable type E+F, 1,8 mConnecting cable, 9/9 pole, 3 m, for Interlock/E-StopConnecting cable, 9/9 pole, 3 m, for remoteConnecting cable, 25/25 pole, 3 m, for digital I/OConnecting cable, 15/15 pole, 3 m, for extraction AF1.1Assembly instructions de/en


6.2 5526167Pivot arm formonitor with keyboard tray

6.3 5905933 Rotary axis ZD30

6.4 5905978 3-jaw chuck ZD306.5 5526156 Connecting cable ZD306.6 5905818 Suction hose, 2.5 m

6.7 On request: Mobile cart

Part no. Device

7.1

5528090Laser safety housing LSG+100E 230 V

7.2 5528095Laser safety housing LSG+100E 120 V

Scope of delivery Laser safety housing LSG+100EPower cable type E+F, 1,8 mConnecting cable, 9/9 pole, 3 m, for Interlock/E-StopConnecting cable, 9/9 pole, 3 m, for remoteConnecting cable, 25/25 pole, 3 m, for digital I/OConnecting cable, 15/15 pole, 3 m, for extraction AF1.1Pivot arm for monitor with keyboard trayAssembly instructions de/en


7.3 5527690 Linear axis X400

7.4 5905933 Rotary axis ZD30

7.5 5905978 3-jaw chuck ZD307.6 5526156 Connecting cable ZD307.7 5527685 Axis controller 2S7.8 5527665 Connecting cable 2S7.9 5526030 Rotary table module RTM6507.10 On request: Laser typeplate handling 7.11 5525994 Roller set

Part no. Device

8.1 5527285Laser typeplate handling THS+Basic

Scope of delivery Laser typeplate handling THS+BasicPower cable type E+F, 3 mConnecting cable, 9/9 pole, 3 m, for Interlock/E-StopConnecting cable, 25/25 pole, 3 m, for digital I/OConnecting cable, 15/15 pole, 3 m, for extraction AF1.1Assembly instructions de/en


8.2 On request: Customer-specific jig

Part no. Device

9.1 5527290Laser typeplate handling THS+M

Scope of delivery Laser typeplate handling THS+MPower cable type E+F, 3 mConnecting cable, 9/9 pole, 3 m, for Interlock/E-StopConnecting cable, 25/25 pole, 3 m, for digital I/OConnecting cable, 15/15 pole, 3 m, for extraction AF1.1Assembly instructions de/en


9.2 On request: Customer-specific magazine

Part no. Device

10.1 5907275Extraction and filter device AF1.1-230 including filter set

10.2 5907280Extraction and filter device AF1.1-120 including filter set

Scope of delivery Extraction and filter device AF1.1Pre-filterFilter for suspended particlesActive carbon filterPower cable type E+F, 2,5 mAssembly instructions de/en


10.3 5905818 Suction hose, 2.5 m

Part no. Consumables PU10.4 5906623.001 Safety filter bag 110.5 5906617.001 Pre-filter AF1/AF2 1010.6 5906618.001 Filter for susp. part. AF1/AF2 110.7 5906619.001 Active carbon filter AF1/AF2 1

19

Product overview

Label software cablabel S3Design, print, monitoring

Label dispensers HS/VSfor horizontal or vertical dispensing

Labeling heads IXORto be integrated in labeling machines

Print and apply systems Hermes+

for automation

Marking lasers FL+

with output powers 10 to 50 wattLaser marking systemsfor industrial solutions

Label printers XD4Tfor double-sided printing

Label printers A2+

industrial device up to print width 57 mm

Label printers A6+


Label printers A8+


Label printers SQUIX


Label printers EOS1desktop device for label rolls up to diameter 155 mm

Label printers EOS4desktop device for label rolls up to diameter 210 mm

Label printers MACH1/2in the lower price segment

Label printers MACH4where little space is available

Label printers XCfor two-color printing

Labelsof more than 400 materials

Ribbonsin wax, resin and resin/wax qualities

Print modules PXto be integrated in automatic labeling systems

Print and apply systems Hermes Cfor two-color printing and applying

2

3

4

5

6

7

1

This document and any translations hereof are the property of cab Produkttechnik GmbH & Co KG. © cab/9009751The replication, processing, reproduction or distribution in whole or in parts requires our prior written consent.

Headquarters and fabrication in Germany

to International subsidiaries

There are further 820 distribution partners in more than 80 countries.

2 7

Asia

Taiwancab Technology Co., Ltd.

16F-1, No. 700, Jhong Jheng RdJunghe, Taipei 23552phone +886 (02) 8227 3966fax +886 (02) 8227 [email protected]/tw

Chinacab (Shanghai) Trading Co., Ltd.

A507, No. 268, Tong Xie RdShanghai 200335phone +86 (021) 6236 3161fax +86 (021) 6236 [email protected]/cn

cab (Shanghai) Trading Co., Ltd.

Room 39, 10F, 8 Lin He Zhong Rd Tian He District, Guangzhou 510610phone +86 (020) 2831 [email protected]/cn

Europe

Germanycab Produkttechnik GmbH & Co KGWilhelm-Schickard-Str. 1476131 Karlsruhephone +49 721 6626 0fax +49 721 6626 [email protected] www.cab.de

Francecab Technologies S.à.r.l.2a Rue de la ModerZ.A. Nord du Val de Moder67350 Niedermodernphone +33 388 722501fax +33 388 722502 [email protected]/fr

America

USAcab Technology, Inc.87 Progress Avenue Unit 1Tyngsboro, MA 01879phone +1 978 649 0293fax +1 978 649 [email protected]/us

Latin America Alejandro BalmacedaHacienda Jurica Pte 1615Colonial de Valle32553 Juárez, Mexicophone +52 656 682 [email protected]/es

Africa

South Africacab Technology (Pty) Ltd.14 Republic StreetBordeaux2125 Randburgphone +27 11 886 3580fax +27 11 789 [email protected]/za

Sta

tus:

10/

2016

1

catalog laser marking - interpack€¦ · laser source ytterbium fiber laser, pulsed, air-cooled cw...

Documents