catalog - ipf electronic · 2019. 5. 20. · ipf electronic gmh alve te - 7 8 densced en _ te 9 96-...

CATALOGSENSOR TECHNOLOGY 2/3

ENSubject to alteration! Version: 07.03.2018

Contents

I Norm switching distancesI Increased switching distancesI All-steel sensorsI Analog sensorsI High-temperature sensorsI Ring sensorsI Pressure-proof sensorsI Welding-proof sensors

Inductive sensors 6

I Metal devicesI Plastic devices

Capacitive sensors 7

I Magnetic proximity switchesI Cylinder sensorsI Magnetic high-temperature sensorsI Accessories

Magnetic sensors8

I Diffuse reflection sensorsI Retro-reflective light barriersI Radar motion sensors

Ultrasonic sensorsRadar sensors 9

Catalog 2/3

ipf electronic gmbh

Kalver Straße 25 – 27 58515 Lüdenscheid Germany

Tel +49 2351 9365-0 Fax +49 2351 9365 [email protected] www.ipf-electronic.com

3ipf electronic gmbh • Kalver Straße 25 - 27 • 58515 Lüdenscheid • Germany │ Tel +49 2351 9365-0 • Fax +49 2351 9365-19 │ [email protected] • www.ipf-electronic.com

functional principleInductive proximity switches are contactlessly working sensors. They detect all conductive metal parts, whether they move or not. The oscillating circuit coil behind the active surface of the proximity switch produces an alternating electromagnetic field that is emitted from the active surface of the initiator. Any electrically conductive material (damping object) approaching the field will induce eddy currents, extracting energy from the oscillator. The damping of the oscillator is then converted into a switching signal in the amplifier.

functional principle of an inductive proximity switch

switching distanceThe distance to the sensor surface, where a metal causes a change in the switching state, is called switching distan-ce. This distance is not the same for all metals. That is why a so-called correction factor has been specified for the res-pective metal, e.g. copper or aluminum. The nominal switching distance is determined by a norm measuring plate. The plate is square, 1mm thick and fabricated out of steel (St37).

One differentiates between the norm switching distance Sn, which is determined without consideration for manufacturing tole-rances or external influences, and the operational switching distance So.The safe operational switching distance is between 0 and 81% of Sn (0< Sa< 0.81 x Sn).

switching hysteresisDuring the approach and subsequent removal of the measuring plate from the initiator there will be a difference between switch-on point and switch-off point. This integrated hysteresis prevents the switching output from oscillating during mechanical vibrations. Usually the hysteresis is between 5 to 15% of Sn.

INDUCTIVE SENSORSINTRODUCTION 1000

6

4 ipf electronic gmbh • Kalver Straße 25 - 27 • 58515 Lüdenscheid • Germany │ Tel +49 2351 9365-0 • Fax +49 2351 9365-19 │ [email protected] • www.ipf-electronic.com

plus- and pro-seriesKindly refer to the special mounting instructions on the specific data sheets!

The PLUS-series of the ipf electronic recognizes metals at distances of up to 3-times the distance of a standard device of the same design.

The PRO-series combines a large switching distance with extreme mechanical stability under load. The devices are completely made from stainless steel. This means that the weak point of any proximity switch, the active surface, has even been protected against any big impacts. A new operating principle was used to obtain this „transparence“.

For these series the edges of the norm measuring plate used to determine the nominal switching distance require a length that corresponds to 3 times the diameter of the active sensor surface.

output circuitFor the switching outputs of DC devices, a differentiation is made between PNP and NPN. For PNP outputs the load is connected in such a way that it is energized (positive switching) when the sensor is driven to full output (damping). NPN devices maintain their load permanently energized, switching the earth connection only (negative switching). A corresponding wiring diagram is supplied with every sensor.

The alternating current devices are usually 2-wire devices without short-circuit protection. Consequently a load must be connected, which allows for a minimum load current of 2mA, however, not exceeding the maximum load current.

Proximity switches with analog output circuits are used in the control and measurement industry. These devices produce either a linear voltage (0 … 10V) or a current (4 … 20mA) instead of a switching signal.

connection in seriesTo be operationally safe the connection in series of 3-wire PNP sensors requires a logical AND-gate, e.g. the VL250100.

parallel connectionWhen connecting 3-wire PNP-sensors in parallel, the internal resistance of the sensor that is driven to full output influences the other proximity switches. This requires decoupling diodes to be inserted into the outputs. A logical OR-gate, e.g. the VL250120, can be used to facilitate the connection in parallel.

mountingPlease follow the mounting instructions for flush or non-flush sensors when installing inductive proximity switches into a metal backing material to avoid undefined switching of the device.

mounting instructions for flush sensors mounting instructions for non-flush sensorsFor flush mounting the active surface of the sensor head may be on one level with the backing material (metal).

For non-flush mounting the active surface must not be surroun-ded by the metal of the carrier. Through this the electromagnetic field is less damped, thus allowing larger switching distances.

INDUCTIVE SENSORS1000 INTRODUCTION


switching frequencyThe switching frequency states the maximum number of available switching operations per second.Every switching operation of the inductive proximity switch triggers the oscillating circuit. The time needed for the oscillation puts a limit on the switching frequency.For half the nominal switching distance the pulse to pause ratio should be at least 1 : 2,i.e. when choosing the right proximity switch, a compromise needs to be made between the size of the sensor and the switching frequency. General rule: The larger the sensor, the lower the switching frequency.

electrical connectionThe electrical connection of the proximity switches takes place either through a directly connected cable, a M8-connector, M12-connector or a Lemo-connector for high-temperature applications or through a MC-connector for 230V AC applications.

tightening torquesTo avoid damage when mounting proximity switches, never exceed the specified tightening torques.

stainless steel thread nickel/chrome-plated brass thread plastic threadM4 = 0.8Nm M8 = 4Nm M12 = 1.5NmM5 = 1.5Nm M12 = 10Nm M18 = 3NmM8 = 7Nm M18 = 25Nm M30 = 5NmM12 = 20Nm M30 = 70NmM18 = 50Nm

active switching zone / active surfaceThe active switching zone is the area in front of the active surface, within which the proximity switch reacts to the approach of metal parts, i.e. changes the state of the output.

nominal switching distance (Sn)The distance at which a metal part that is approaching the active surface of the proximity switch causes a status change in the state of the switching output.

output functionnormally open: object within the area of the active switching zone – output switchednormally closed: object within the area of the active switching zone – output inhibited

correction factorsSpecify the reduction in the switching distance, if materials other than steel St37 are used. The change in the switching distance depends on the type, characteristics (internal structure), size and the geometry of the material that is to be detected.typical correction factors: St:1 V2A: approx. 0.7, Ms: approx. 0.4, Al: approx. 0.3, Cu: approx. 0.2In order to assess the approximate switching distance on the materials which differ from St37, the switching distance for St37 has to be multiplied by the appropriate correction factor.

repeat accuracyThe repeat accuracy (according to IEC 60947-5-2 / EN 60947-5-2) is the repeat accuracy of the real switching distance Sr over a period of 8 hours at an ambient temperature of (23 ± 5)°C and a defined operating voltage Vs. The specified repeat accuracy corresponds to this definition. Generally the repeat accuracy is considerably better in case of sequent measurements.

reverse polarity protectionAn internal protection prevents destruction of the proximity switch if the connection lines are accidentally swapped.

short-circuit protection (DC devices)An internal protection prevents destruction of the proximity switch in case of an overcurrent.

INDUCTIVE SENSORSINTRODUCTION 1000

6


glossary for pictograms

mounting

flush non-flush semi-flush

specifications

unaffected by atmospheric changes pressure-proof high temperature increased magnetic field resistance

voltage supply

direct current alternating current universal power device

output signals

PNP PNP, no PNP, no/nc PNP, NPN relay, change-over contact AC, no/nc

connection options

M8-connector M8-connector M8-connector M12-connector M12-connector M12-connector 3-pin 4-pin 4-pin 5-pin

analog output alarm output

other information

protective isolation

INDUCTIVE SENSORS1000 INTRODUCTION


stan

dard

, sho

rt, p

refe

renti

al, t

op

ustandard designushort designupreferential seriesutop-series

INDUCTIVE SENSORSNORM SWITCHING DISTANCES 1100

6


INDUCTIVE SENSORS1100 NORM SWITCHING DISTANCES

NOTES


P LED display of the switching signal

P robust metal housing

P different lengths

P connection via cable, M8-, M12- or microchange-connector (MC)

manyfold output signals and connection possibilities

descriptionAn important feature of these sensors is the cast electronics in a stable, metal housing. As a consequence of the compound, the electronics are perfectly protected from vibrations. As such, the devices are also sealed against fluids, except for the connector side.They are much more resistant to mechanical stress than con-ventional proximity switches made from plastic.The ambient temperature can be up to +70°C. In addition, these sensors work through the contactless detection of the object, without wear and tear.Due to the large number of mechanical dimensions, the devices can be exchanged against many other proximity swit-ches without any problems.The range of applications in which these inductive sensors can be used extends, for example, from machine/systems engineering, automotive industry, conveyor technology and packaging industry, technology for the printing/paper indus-tries, chemical engineering and process engineering (as well as many others).An inductive sensor (proximity switch, position sensor, initi-ator) is a contactless switch which reliably detects metallic

objects. In the case of inductive sensors, a correction factor is stated which evaluates the reduction of the switching distance in relation to the different materials that the object is made from. This factor depends on the type, characteristics (internal structure), size and geometry of the material that the object to be detected is made from. The stated switching distance value relates to steel St37 (factor 1 steel). In order to assess the approximate switching distance for materials which differ from this, the value has to be multiplied by the appropriate correction factor.For realizing the maximum switching distance, the size and characteristics of the object to be detected (standard target and/or flat surface) should be taken into account.

application examplesu integration in machine parts in the automation technologyu checking the presence of metal parts with various dimensi-

onsu detecting object heights, e.g. metal parts on conveyor beltsudetection of objects through the walls of non-metallic con-

tainers and tubes

dimensions Ø3mm M4 x 0.5 Ø4mm M5 x 0.5 Ø6.5mm M8 x 1 M12 x 1 M18 x 1 M30 x 1.5

flush switching distance 0.6 to 15mmnon-flush switching distance 2.0 to 15mm


6


Notes on inductive proximity switches

I inductive sensor

IA flush, preferential seriesIB flush, standard and short design, top-seriesIM non-flush, preferential series IN non-flush, standard and short design, top-series

functional principleThe oscillation coil behind the active surface of the proximity switch produces an alternating electromagnetic field. Any electrically conductive material entering the field will induce rotational currents extracting energy from the oscillating circuit. The damping of the oscillator is then converted into a switching signal in the output amplifier.It follows the functional principle that all metals are detected, moving or not. Important: The high frequency field produces no mea-surable increase in temperature and no magnetic influence inside the object to be detected. That means the sensors operate without interacting with the system.

functional principle of an inductive proximity switchswitching distance / norm measuring plateThe distance to the sensor surface, where a metal causes a change in the switching state, is called switching distance. This distance is not the same for all metals. That is why a so-called correction factor has been specified for the respective metal, e.g. copper or aluminum. The nominal switching distance Sn is determined by a norm measuring plate. This is a quadratic metal plate made from steel (St37) with a thickness of 1mm and a smoothed surface. The edge length is 3 x Sn if 3 x Sn is larger than the diameter of the active surface, otherwise the edge length is the same as the diameter of the active surface.One differentiates between the normal switching distance Sn, which is determined without consideration for manufacturing tolerances or external influences, and the operational switching distance Sa.The safe operational switching distance is between 0 and 81% of Sn (0< Sa< 0.81 x Sn).




output circuitFor the switching outputs of direct current devices a differentiation is made between PNP and NPN. For PNP outputs the load is connected in such a way that it is energized (positive switching) when the sensor is driven to full output (damping). NPN devices maintain their load permanently energized, switching the earth connection only (negative switching). A corresponding wiring diagram is supplied with every sensor.

For devices with M12-connector and normally closed contact function (nc), the switching output is wired via PIN2. For this reason a 4-wire cable socket should be used and the connection made via the white wire.

The alternating current devices are usually 2-wire devices without short-circuit protection. Consequently a load must be connec-ted, which allows for a minimum load current of 2mA, however, not exceeding the maximum load current.Proximity switches with analog output circuits are used in the control and measurement industry. These devices produce either a linear voltage (0 … 10V) or a current (4 … 20mA) instead of a switching signal.

series connectionWhen a number of sensors are connected in series, the voltage drop of each device should be taken into account in order to ensure that the final device also receives the required operating voltage. The internal electronics permits a maximum of 3 devices to be connected in series.To be operationally safe the connection in series of 3-wire PNP sensors requires a logical AND-gate, e.g. VL250100.


mountingPlease follow the mounting instructions for flush or non-flush sensors when installing inductive proximity switches into a metal backing material to avoid undefined switching of the device. For a flush device the active face may be on one level with the backing material. Non-flush sensors must protrude. As a rule of thumb use 2x the nominal switching distance of the sensor.

mounting instructions for flush sensors mounting instructions for non-flush sensors

switching frequencyThe switching frequency states the maximum number of available switching operations per second. Every switching operation of the inductive proximity switch triggers the oscillating circuit. The time needed for the oscillation puts a limit on the switching frequency. For half the nominal switching distance the pulse to pause ratio should be at least 1 : 2,i.e. when choosing the right proximity switch, a compromise needs to be made between the size of the sensor and the switching frequency. General rule: The larger the sensor, the smaller the switching frequency.


6


tightening torquesTo avoid damage when mounting proximity switches, never exceed the tightening torque given.

stainless steel thread nickel-plated brass thread plastic thread

M4 = 0,8Nm M8 = 4Nm M12 = 1,5NmM5 = 1,5Nm M12 = 10Nm M18 = 3NmM8 = 6Nm M18 = 25Nm M30 = 5NmM12 = 20Nm M30 = 150NmM18 = 50Nm M30 = 150Nm

active switching zone / active surface:The active switching zone is the area in front of the active surface, within which the proximity switch reacts to the approach of metal parts, i.e. changes the state of the output.

nominal switching distance (Sn):The distance at which a metal part that is approaching the active surface of the proximity switch causes a change in the state of the switching output.

repeatability:Repeat accuracy of two measurements under standardized conditions. The difference in the measured values should be less than 10%.

output function:Normally open: object within the area of the active switching zone – output switchedNormally closed: object within the area of the active switching zone – output inhibited

readiness delay:Time required by the proximity switch to be functional after the supply voltage is applied (lies in the millisecond range).

correction factor:Specify the reduction in the switching distance, if materials other than steel St37 are used. The change in the switching distance depends on the type, characteristics (internal structure), size and the geometry of the material that is to be detected.typical correction factors: St37: 1 V2A: approx. 0.7 Ms: approx. 0.4 Al: approx. 0.3 Cu: approx. 0.2In order to assess the approximate switching distance on the materials which differ from St37, the switching distance for St37 has to be multiplied by the appropriate correction factor.

repeat accuracy The repeat accuracy (according to IEC 60947-5-2 / EN 60947-5-2) is the repeat accuracy of the real switching distance Sr over a period of 8 hours at an ambient temperature of (23 ± 5)°C and a defined operating voltage Vs. The specified repeat accuracy corresponds to this definition. Generally the repeat accuracy is considerably better in case of sequent measurements.

reverse polarity protection:An internal protection prevents destruction of the proximity switch if the connection lines are accidentally swapped.

short-circuit protection:An internal protection prevents destruction of the proximity switch in case of an overcurrent.

switching point drift:The switching point shifts due to the change in ambient temperature.

Warning: Never use these devices in applications where the safety of a person depends on their functionality.



TECHNICAL DATAswitching distance (Sn) 0.6mm 0.6mm 0.6mm 0.6mmoutput signal see above see above see above see above

operating voltage 10 … 30V DC 10 … 30V DC 10 … 30V DC 10 … 30V DCcurrent consumption (w/o load) ≤ 5.5mA ≤ 5.5mA ≤ 5.5mA ≤ 5.5mAoutput current (max. load) 100mA 100mA 100mA 100mAvoltage drop (max. load) 1.5V DC 1.5V DC 1.5V DC 1.5V DCNorm measuring plate acc. to EN 60947-5-2 acc. to EN 60947-5-2 acc. to EN 60947-5-2 acc. to EN 60947-5-2hysteresis < 15% < 15% < 15% < 15%repeat accuracy acc. to EN 60947-5-2 acc. to EN 60947-5-2 acc. to EN 60947-5-2 acc. to EN 60947-5-2correction factor St37: 1; V2A: approx. 0.7; Ms: approx. 0.4; Al: approx. 0.3; Cu: ca. 0.2 switching frequency 5kHz 5kHz 5kHz 5kHz

display (signal) yellow LED yellow LED yellow LED yellow LEDshort-circuit protection + + + +reverse polarity protection + + + +

dimensions Ø 3mm Ø 3mm M4x0.5 M4x0.5length (thread/complete) -/22mm -/22mm 19mm/22mm 19mm/22mmhousing material stainl. steel stainl. steel stainl. steel stainl. steeloperating temperature -25 … +70°C -25 … +70°C -25 … +70°C -25 … +70°Cdegree of protection (EN 60529) IP67 IP67 IP67 IP67

connection 2m PUR cable, 3-wire M8-cable connector, 3-pin 2m PUR cable, 3-wire M8-cable connector, 3-pinconnection accessories - e.g. VK200075 - e.g. VK200075mounting accessories (clip) - - AY000044 AY000044

short design short design short design short designarticle-no. IBR30104 IBR30174 IB040104 IB040174switching distance (Sn) 0.6mm 0.6mm 0.6mm 0.6mmoutput signal pnp, no pnp, no pnp, no pnp, nomounting flush flush flush flushconnection cable M8-cable connector cable M8-cable connector

article-no. IBR30204 * IB040204 *output signal pnp, nc pnp, nc pnp, nc pnp, nc

article-no. * * * *output signal npn, no npn, no npn, no npn, no

article-no. * * * *output signal npn, nc npn, nc npn, nc npn, nc

* on request


6



operating voltage 10 … 30V DC 10 … 30V DC 10 … 30V DC 10 … 30V DCcurrent consumption (w/o load) ≤ 5.5mA ≤ 5.5mA ≤ 5.5mA ≤ 5.5mAoutput current (max. load) 200mA 200mA 200mA 200mAvoltage drop (max. load) 1.5V DC 1.5V DC 1.5V DC 1.5V DCNorm measuring plate acc. to EN 60947-5-2 acc. to EN 60947-5-2 acc. to EN 60947-5-2 acc. to EN 60947-5-2hysteresis < 15% < 15% < 15% < 15%repeat accuracy acc. to EN 60947-5-2 acc. to EN 60947-5-2 acc. to EN 60947-5-2 acc. to EN 60947-5-2correction factor St37: 1; V2A: approx. 0.7; Ms: approx. 0.4; Al: approx. 0.3; Cu: ca. 0.2 switching frequency 5kHz 5kHz 5kHz 5kHz


dimensions Ø 4mm Ø 4mm M5x0.5 M5x0.5length (thread/complete) -/25mm -/38mm 18mm/25mm 23mm/38mmhousing material stainl. steel stainl. steel stainl. steel stainl. steeloperating temperature -25 … +70°C -25 … +70°C -25 … +70°C -25 … +70°Cdegree of protection (EN 60529) IP67 IP67 IP67 IP67

connection 2m PUR cable, 3-wire M8-connector, 3-pin 2m PUR cable, 3-wire M8-connector, 3-pinconnection accessories - e.g. VK200075 - e.g. VK200075mounting accessories (universal holder) - - AY000115 AY000115mounting accessories (clip) AY000044 AY000044 AY000045 AY000045

short design short design short design short designarticle-no. IBR40104 IBR40174 IB050104 IB050174switching distance (Sn) 0.8mm 0.8mm 0.8mm 0.8mmoutput signal pnp, no pnp, no pnp, no pnp, nomounting flush flush flush flushconnection cable M8-connector cable M8-connector

article-no. IBR40204 IBR40274 IB050204 IB050274output signal pnp, nc pnp, nc pnp, nc pnp, nc

article-no. IBR41104 * IB051104 IB051174output signal npn, no npn, no npn, no npn, no


* on request




operating voltage 10 … 30V DC 10 … 30V DC 10 … 30V DC 10 … 30V DCcurrent consumption (w/o load) ≤ 15mA ≤ 15mA ≤ 15mA ≤ 15mAoutput current (max. load) 200mA 200mA 200mA 200mAvoltage drop (max. load) 2.0V DC 2.0V DC 2.0V DC 2.0V DCNorm measuring plate acc. to EN 60947-5-2 acc. to EN 60947-5-2 acc. to EN 60947-5-2 acc. to EN 60947-5-2hysteresis < 15% < 15% < 15% < 15%repeat accuracy acc. to EN 60947-5-2 acc. to EN 60947-5-2 acc. to EN 60947-5-2 acc. to EN 60947-5-2correction factor St37: 1; V2A: approx. 0.7; Ms: approx. 0.4; Al: approx. 0.3; Cu: ca. 0.2 switching frequency 1kHz 1kHz 1kHz 1kHz


dimensions Ø 6.5mm Ø 6.5mm Ø 6.5mm Ø 6.5mmlength (thread/complete) -/40mm -/50mm -/50mm -/35mmhousing material nickel-plated brass nickel-plated brass stainl. steel stainl. steeloperating temperature -25 … +70°C -25 … +70°C -25 … +70°C -25 … +70°Cdegree of protection (EN 60529) IP67 IP67 IP67 IP67

connection 2m PUR cable, 3-wire M8-connector, 3-pin 2m PUR cable, 3-wire 2m PUR cable, 3-wireconnection accessories - e.g. VK200075 - -mounting accessories (clip) AY000046 AY000046 AY000046 AY000046

preferential series preferential series standard design short designarticle-no. IA060100 IA060170 IB060100 IB060104switching distance (Sn) 1.5mm 1.5mm 1.5mm 1.5mmoutput signal pnp, no pnp, no pnp, no pnp, nomounting flush flush flush flushconnection cable M8-connector cable cable

article-no. - - IB060200 IB060204output signal pnp, nc pnp, nc pnp, nc pnp, nc

article-no. - - IB061100 IB061104output signal npn, no npn, no npn, no npn, no

article-no. - - * *output signal npn, nc npn, nc npn, nc npn, nc

* on request


6



operating voltage 10 … 30V DC 10 … 30V DC 10 … 30V DC 10 … 30V DCcurrent consumption (w/o load) ≤ 15mA ≤ 15mA ≤ 15mA ≤ 15mAoutput current (max. load) 200mA 200mA 200mA 200mAvoltage drop (max. load) 2.0V DC 2.0V DC 2.0V DC 2.0V DCNorm measuring plate acc. to EN 60947-5-2 acc. to EN 60947-5-2 acc. to EN 60947-5-2 acc. to EN 60947-5-2hysteresis < 15% < 15% < 15% < 15%repeat accuracy acc. to EN 60947-5-2 acc. to EN 60947-5-2 acc. to EN 60947-5-2 acc. to EN 60947-5-2correction factor St37: 1; V2A: approx. 0.7; Ms: approx. 0.4; Al: approx. 0.3; Cu: ca. 0.2 switching frequency 1kHz 1kHz 1kHz 5kHz


dimensions Ø 6.5mm Ø 6.5mm Ø 6.5mm Ø 6.5mmlength (thread/complete) -/60mm -/45mm -/29mm -/16mmhousing material stainl. steel stainl. steel stainl. steel stainl. steeloperating temperature -25 … +70°C -25 … +70°C -25 … +70°C -25 … +70°Cdegree of protection (EN 60529) IP67 IP67 IP67 IP67

connection M8-connector, 3-pin M8-connector, 3-pin M8-connector, 3-pin 2m PUR cable, 3-wireconnection accessories e.g. VK200075 e.g. VK200075 e.g. VK200075 -mounting accessories (clip) AY000046 AY000046 AY000046 AY000046

standard design short design short design short designarticle-no. IB060170 IB060174 IB060185 IB0601A4switching distance (Sn) 1.5mm 1.5mm 1.5mm 1.5mmoutput signal pnp, no pnp, no pnp, no pnp, nomounting flush flush flush flushconnection M8-connector M8-connector M8-connector cable

article-no. IB060270 IB060274 IB060285 IB0602A4output signal pnp, nc pnp, nc pnp, nc pnp, nc

article-no. IB061170 IB061174 * IB0611A4output signal npn, no npn, no npn, no npn, no


* on request




operating voltage 10 … 30V DC 10 … 30V DC 10 … 30V DC 10 … 30V DCcurrent consumption (w/o load) ≤ 15mA ≤ 15mA ≤ 15mA ≤ 15mAoutput current (max. load) 200mA 200mA 200mA 200mAvoltage drop (max. load) 2.0V DC 2.0V DC 2.0V DC 2.0V DCnorm measuring plate acc. to EN 60947-5-2 acc. to EN 60947-5-2 acc. to EN 60947-5-2 acc. to EN 60947-5-2hysteresis < 15% < 15% < 15% < 15%repeat accuracy acc. to EN 60947-5-2 acc. to EN 60947-5-2 acc. to EN 60947-5-2 acc. to EN 60947-5-2correction factor St37: 1; V2A: approx. 0.7; Ms: approx. 0.4; Al: approx. 0.3; Cu: ca. 0.2 switching frequency 1kHz 1kHz 1kHz 1kHz


dimensions Ø 6.5mm Ø 6.5mm Ø 6.5mm Ø 6.5mmlength (thread/complete) -/50mm -/40mm -/40mm -/50mmhousing material stainl. steel stainl. steel nickel-plated brass nickel-plated brassoperating temperature -25 … +70°C -25 … +70°C -25 … +70°C -25 … +70°Cdegree of protection (EN 60529) IP67 IP67 IP67 IP67

connection M8-connector, 3-pin 2m PUR cable, 3-wire 2m PVC cable, 3-wire M8-connector, 3-pinconnection accessories e.g. VK200075 - e.g. VK200075mounting accessories (clip) AY000046 AY000046 AY000046 AY000046

top-series top-series preferential series preferential seriesarticle-no. IB060173 IB0601A3 IM060100 IM060170switching distance (Sn) 2.0mm 2.0mm 3.0mm 2.0mmoutput signal pnp, no pnp, no pnp, no pnp, nomounting flush flush non-flush non-flushconnection M8-connector cable cable M8-connector

article-no. * * - -output signal pnp, nc pnp, nc pnp, nc pnp, nc

article-no. * * - -output signal npn, no npn, no npn, no npn, no

article-no. * * - -output signal npn, nc npn, nc npn, nc npn, nc

* on request


6





dimensions Ø 6.5mm Ø 6.5mm Ø 6.5mm Ø 6.5mmlength (thread/complete) -/50mm -/60mm -/47mm -/35.5mmhousing material stainl. steel stainl. steel stainl. steel stainl. steeloperating temperature -25 … +70°C -25 … +70°C -25 … +70°C -25 … +70°Cdegree of protection (EN 60529) IP67 IP67 IP67 IP67

connection 2m PVC cable, 3-wire M8-connector, 3-pin M8-connector, 3-pin 2m PVC cable, 3-wireconnection accessories - e.g. VK200075 e.g. VK200075 -mounting accessories (clip) AY000046 AY000046 AY000046 AY000046

standard design standard design short design short designarticle-no. IN060100 IN060170 IN060174 IN060104switching distance (Sn) 3.0mm 3.0mm 3.0mm 3.0mmoutput signal pnp, no pnp, no pnp, no pnp, nomounting non-flush non-flush non-flush non-flushconnection cable M8-connector M8-connector cable

article-no. * IN060270 * *output signal pnp, nc pnp, nc pnp, nc pnp, nc

article-no. * IN061170 * *output signal npn, no npn, no npn, no npn, no


* on request



TECHNICAL DATAswitching distance (Sn) 4.0mm 4.0mm output signal see above see above

operating voltage 10 … 30V DC 10 … 30V DC current consumption (w/o load) ≤ 15mA ≤ 15mA output current (max. load) 200mA 200mA voltage drop (max. load) 2.0V DC 2.0V DC norm measuring plate acc. to EN 60947-5-2 acc. to EN 60947-5-2 hysteresis < 15% < 15% repeat accuracy acc. to EN 60947-5-2 acc. to EN 60947-5-2correction factor St37: 1; V2A: approx. 0.7; Ms: approx. 0.4; Al: approx. 0.3; Cu: ca. 0.2 switching frequency 1kHz 1kHz

display (signal) yellow LED yellow LED short-circuit protection + + reverse polarity protection + +

dimensions Ø 6.5mm Ø 6.5mm length (thread/complete) -/50mm -/40mm housing material stainl. steel stainl. steel operating temperature -25 … +70°C -25 … +70°C degree of protection (EN 60529) IP67 IP67

connection M8-connector, 3-pin 2m PUR cable, 3-wire connection accessories e.g. VK200075 -mounting accessories (clip) AY000046 AY000046

top-series top-seriesarticle-no. IN060173 IN0601A3 switching distance (Sn) 4.0mm 4.0mm output signal pnp, no pnp, no mounting non-flush non-flush connection M8-connector cable

article-no. * *output signal pnp, nc pnp, nc

article-no. * *output signal npn, no npn, no

article-no. * *output signal npn, nc npn, nc

* on request


6





dimensions M8x1 M8x1 M8x1 M8x1length (thread/complete) 40mm/40mm 35mm/50mm 40mm/50mm 35mm/35mmhousing material nickel-plated brass nickel-plated brass stainl. steel stainl. steeloperating temperature -25 … +70°C -25 … +70°C -25 … +70°C -25 … +70°Cdegree of protection (EN 60529) IP67 IP67 IP67 IP67

connection 2m PVC cable, 3-wire M8-connector, 3-pin 2m PVC cable, 3-wire 2m PVC cable, 3-wireconnection accessories - e.g. VK200075 - -mounting accessories (universal holder) AY000115 AY000115 AY000115 AY000115mounting accessories (clip) AY000047 AY000047 AY000047 AY000047

preferential series preferential series standard design short design article-no. IA080100 IA080170 IB080100 IB080104switching distance (Sn) 1.5mm 1.5mm 1.5mm 1.5mmoutput signal pnp, no pnp, no pnp, no pnp, nomounting flush flush flush flushconnection cable M8-connector cable cable

article-no. - - IB080200 IB080204output signal pnp, nc pnp, nc pnp, nc pnp, nc

article-no. - - IB081100 IB081104output signal npn, no npn, no npn, no npn, no


* on request






dimensions M8x1 M8x1 M8x1 M8x1length (thread/complete) 39mm/60mm 45mm/60mm 31mm/45mm 20mm/29mmhousing material stainl. steel stainl. steel nickel-plated brass nickel-plated brassoperating temperature -25 … +70°C -25 … +70°C -25 … +70°C -25 … +70°Cdegree of protection (EN 60529) IP67 IP67 IP67 IP67

connection M12-connector, 3-pin M8-connector, 3-pin M8-connector, 3-pin M8-connector, 3-pinconnection accessories e.g. VK200025 e.g. VK200075 e.g. VK200075 e.g. VK200075mounting accessories (universal holder) AY000115 AY000115 AY000115 AY000115mounting accessories (clip) AY000047 AY000047 AY000047 AY000047

standard design standard design short design short design article-no. IB080121 IB080170 IB080174 IB080184switching distance (Sn) 1.5mm 1.5mm 1.5mm 1.5mmoutput signal pnp, no pnp, no pnp, no pnp, nomounting flush flush flush flushconnection M12-connector M8-connector M8-connector M8-connector

article-no. IB080221 IB080270 IB080274 IB080284output signal pnp, nc pnp, nc pnp, nc pnp, nc

article-no. IB081121 IB081170 IB081174 *output signal npn, no npn, no npn, no npn, no

article-no. * * * *output signal npn, nc npn, nc npn, nc npn, ncc

* on request


6





dimensions M8x1 M8x1 M8x1 M8x1length (thread/complete) 16mm/16mm 28mm/60mm 35mm/50mm 35mm/40mmhousing material stainl. steel nickel-plated brass stainl. steel stainl. steeloperating temperature -25 … +70°C -25 … +70°C -25 … +70°C -25 … +70°Cdegree of protection (EN 60529) IP67 IP67 IP67 IP67

connection 2m PUR cable, 3-wire M12-connector, 3-pin M8-connector, 3-pin 2m PUR cable, 3-wireconnection accessories - e.g. VK200025 e.g. VK200075 -mounting accessories (universal holder) AY000115 AY000115 AY000115 AY000115mounting accessories (clip) AY000047 AY000047 AY000047 AY000047

short design top-series top-series top-series article-no. IB0801A4 IB080123 IB080173 IB0801A3switching distance (Sn) 1.5mm 2.0mm 2.0mm 2.0mmoutput signal pnp, no pnp, no pnp, no pnp, nomounting flush flush flush flushconnection cable M12-connector M8-connector cable

article-no. IB0802A4 * IB080273 IB0802A3output signal pnp, nc pnp, nc pnp, nc pnp, nc

article-no. * IB081123 * IB0811A3output signal npn, no npn, no npn, no npn, no


* on request






dimensions M8x1 M8x1 M8x1 M8x1length (thread/complete) 35mm/40mm 30mm/50mm 32mm/35mm 28mm/45mmhousing material nickel-plated brass nickel-plated brass stainl. steel nickel-plated brassoperating temperature -25 … +70°C -25 … +70°C -25 … +70°C -25 … +70°Cdegree of protection (EN 60529) IP67 IP67 IP67 IP67

connection 2m PVC cable, 3-wire M8-connector, 3-pin 2m PVC cable, 3-wire M8-connector, 3-pinconnection accessories - e.g. VK200075 - e.g. VK200075mounting accessories (universal holder) AY000115 AY000115 AY000115 AY000115mounting accessories (clip) AY000047 AY000047 AY000047 AY000047

preferential series preferential series short design short design article-no. IM080100 IM080170 IN080104 IN080174switching distance (Sn) 2.0mm 2.0mm 2.5mm 2.5mmoutput signal pnp, no pnp, no pnp, no pnp, nomounting non-flush non-flush non-flush non-flushconnection cable M8-connector cable M8-connector

article-no. - - * *output signal pnp, nc pnp, nc pnp, nc pnp, nc

article-no. - - IN081104 IN081174output signal npn, no npn, no npn, no npn, no


* on request


6





dimensions M8x1 M8x1 M8x1 M8x1length (thread/complete) 38mm/50mm 23mm/s. oben 40mm/60mm 29mm/50mmhousing material stainl. steel nickel-plated brass stainl. steel stainl. steeloperating temperature -25 … +70°C -25 … +70°C -25 … +70°C -25 … +70°Cdegree of protection (EN 60529) IP67 IP67 IP67 IP67

connection 2m PVC cable, 3-wire M12-connector, 3-pin M8-connector, 3-pin M8-connector, 3-pinconnection accessories - e.g. VK200025 e.g. VK200075 e.g. VK200075 mounting accessories (universal holder) AY000115 AY000115 AY000115 AY000115mounting accessories (clip) AY000047 AY000047 AY000047 AY000047

standard design standard design standard design top-series article-no. IN080100 IN080121 IN080170 IN080173switching distance (Sn) 3mm 3mm 3mm 4mmoutput signal pnp, no pnp, no pnp, no pnp, nomounting non-flush non-flush non-flush non-flushconnection cable M12-connector M8-connector M8-connector

article-no. IN080200 IN080221 IN080270 *output signal pnp, nc pnp, nc pnp, nc pnp, nc

article-no. * * * IN081173output signal npn, no npn, no npn, no npn, no

article-no. * * IN081270 *output signal npn, nc npn, nc npn, nc npn, nc

* on request

IN080121 L=60IN080221 L=58



TECHNICAL DATAswitching distance (Sn) 4.0mm output signal see above

operating voltage 10 … 30V DC current consumption (w/o load) ≤ 15mA output current (max. load) 200mA voltage drop (max. load) 2.0V DC norm measuring plate acc. to EN 60947-5-2 hysteresis < 15% repeat accuracy acc. to EN 60947-5-2 correction factor St37: 1; V2A: approx. 0.7;

Ms: approx. 0.4; Al: approx.

0.3; Cu: ca. 0.2 switching frequency 1kHz

display (signal) yellow LED short-circuit protection + reverse polarity protection +

dimensions M8x1 length (thread/complete) 31mm/40mm housing material stainl. steel operating temperature -25 … +70°C degree of protection (EN 60529) IP67

connection 2m PUR cable, 3-wire connection accessories - mounting accessories (universal holder) AY000115 mounting accessories (clip) AY000047

top-series article-no. IN0801A3 switching distance (Sn) 4mm output signal pnp, no mounting non-flush connection cable

article-no. * output signal pnp, nc

article-no. IN0811A3 output signal npn, no

article-no. *output signal npn, nc

* on request


6



operating voltage 10 … 30V DC 10 … 30V DC 10 … 30V DC 10 … 30V DCcurrent consumption (w/o load) ≤ 15mA ≤ 15mA ≤ 15mA ≤ 15mAoutput current (max. load) 200mA 200mA 200mA 200mAvoltage drop (max. load) 2.0V DC 2.0V DC 2.0V DC 2.0V DCnorm measuring plate acc. to EN 60947-5-2 acc. to EN 60947-5-2 acc. to EN 60947-5-2 acc. to EN 60947-5-2hysteresis < 15% < 15% < 15% < 15%repeat accuracy acc. to EN 60947-5-2 acc. to EN 60947-5-2 acc. to EN 60947-5-2 acc. to EN 60947-5-2correction factor St37: 1; V2A: approx. 0.7; Ms: approx. 0.4; Al: approx. 0.3; Cu: ca. 0.2 switching frequency 800Hz 800Hz 800Hz 800Hz


dimensions M12x1 M12x1 M12x1 M12x1length (thread/complete) 38mm/50mm 30mm/30mm 40mm/60mm 23mm/45mmhousing material nickel-plated brass nickel-plated brass nickel-plated brass nickel-plated brassoperating temperature -25 … +70°C -25 … +70°C -25 … +70°C -25 … +70°Cdegree of protection (EN 60529) IP67 IP67 IP67 IP67

connection 2m PVC cable, 3-wire 2m PVC cable, 3-wire M12-connector, 3-pin M12-connector, 3-pinconnection accessories - - e.g. VK200025 e.g. VK200025mounting accessories (universal holder) AY000115 AY000115 AY000115 AY000115mounting accessories (clip) AY000049 AY000049 AY000049 AY000049

preferential series preferential series preferential series preferential seriesarticle-no. IA120100 IA120104 IA120120 IA120124switching distance (Sn) 2mm 2mm 2mm 2mmoutput signal pnp, no pnp, no pnp, no pnp, nomounting flush flush flush flushconnection cable cable M12-connector M12-connector

article-no. - - - -output signal pnp, nc pnp, nc pnp, nc pnp, nc

article-no. - - - -output signal npn, no npn, no npn, no npn, no

article-no. - - - -output signal npn, nc npn, nc npn, nc npn, nc

* on request




operating voltage 10 … 30V DC 10 … 30V DC 10 … 30V DC 10 … 30V DCcurrent consumption (w/o load) ≤ 15mA ≤ 15mA ≤ 15mA ≤ 15mAoutput current (max. load) 200mA 200mA 200mA 200mAvoltage drop (max. load) 2.0V DC 2.0V DC 2.0V DC 2.0V DCnorm measuring plate acc. to EN 60947-5-2 acc. to EN 60947-5-2 acc. to EN 60947-5-2 acc. to EN 60947-5-2hysteresis < 15% < 15% < 15% < 15%repeat accuracy acc. to EN 6947-5-2 acc. to EN 60947-5-2 acc. to EN 60947-5-2 acc. to EN 60947-5-2corection factor St37: 1; V2A: approx. 0.7; Ms: approx. 0.4; Al: approx. 0.3; Cu: ca. 0.2 switching frequency 800Hz 800Hz 800Hz 800Hz


dimensions M12x1 M12x1 M12x1 M12x1length (thread/complete) 40mm/51.5mm 25mm/36mm 40mm/60mm 23mm/45mmhousing material nickel-plated brass nickel-plated brass nickel-plated brass nickel-plated brassoperating temperature -25 … +70°C -25 … +70°C -25 … +70°C -25 … +70°Cdegree of protection (EN 60529) IP67 IP67 IP67 IP67


standard design short design standard design short design article-no. IB120100 IB120104 IB120121 IB120125switching distance (Sn) 3mm 3mm 3mm 3mmoutput signal pnp, no pnp, no pnp, no pnp, nomounting flush flush flush flushconnection cable cable M12-connector M12-connector

article-no. IB120200 IB120204 IB120221 IB120225output signal pnp, nc pnp, nc pnp, nc pnp, nc

article-no. IB121100 * IB121121 *output signal npn, no npn, no npn, no npn, no

article-no. IB121200 * IB121221 *output signal npn, nc npn, nc npn, nc npn, nc

* on request


6





dimensions M12x1 M12x1 M12x1 M12x1length (thread/complete) 38.5m/60mm 24mm/44mm 40mm/60mm 38mm/50mmhousing material stainl. steel nickel-plated brass nickel-plated brass nickel-plated brassoperating temperature -25 … +70°C -25 … +70°C -25 … +70°C -25 … +70°Cdegree of protection (EN 60529) IP67 IP67 IP67 IP67

connection M8-connector, 3-pin M8-connector, 3-pin M12-connector, 3-pin 2m PUR cable, 3-wireconnection accessories e.g. VK200075 e.g. VK200075 e.g. VK200025 -mounting accessories (universal holder) AY000115 AY000115 AY000115 AY000115mounting accessories (clip) AY000049 AY000049 AY000049 AY000049

standard design short design top-series top-series article-no. IB120170 IB120174 IB120123 IB1201A3switching distance (Sn) 3mm 3mm 4mm 4mmoutput signal pnp, no pnp, no pnp, no pnp, nomounting flush flush flush flushconnection M8-connector M8-connector M12-connector cable

article-no. * IB120274 IB120223 *output signal pnp, nc pnp, nc pnp, nc pnp, nc

article-no. IB121170 * * *output signal npn, no npn, no npn, no npn, no


* on request







connection 2m PVC cable, 3-wire 2m PVC cable, 3-wire M12-connector, 3-pin M12-connector, 3-pinconnection accessories - - e.g. VK200025 e.g. VK200025 mounting accessories (universal holder) AY000115 AY000115 AY000115 AY000115mounting accessories (clip) AY000049 AY000049 AY000049 AY000049

preferential series preferential series preferential series preferential seriesarticle-no. IM120100 IM120104 IM120120 IM120124switching distance (Sn) 4mm 4mm 4mm 4mmoutput signal pnp, no pnp, no pnp, no pnp, nomounting non-flush non-flush non-flush non-flushconnection cable cable M12-connector M12-connector

article-no. - - - -output signal pnp, nc pnp, nc pnp, nc pnp, nc

article-no. - - - -output signal npn, no npn, no npn, no npn, no


* on request


6







standard design short design standard design short design article-no. IN120100 IN120104 IN120121 IN120125switching distance (Sn) 6.0mm 6.0mm 6.0mm 6.0mmoutput signal pnp, no pnp, no pnp, no pnp, nomounting non-flush non-flush non-flush non-flushconnection cable cable M12-connector M12-connector

article-no. IN120200 IN120204 IN120221 IN120225output signal pnp, nc pnp, nc pnp, nc pnp, nc

article-no. IN121100 IN121104 IN121121 *output signal npn, no npn, no npn, no npn, no

article-no. * * IN121221 *output signal npn, nc npn, nc npn, nc npn, nc

* on request








standard design short design top-series top-series article-no. IN120170 IN120174 IN120123 IN1201A3switching distance (Sn) 6.0mm 6.0mm 8.0mm 8.0mmoutput signal pnp, no pnp, no pnp, no pnp, nomounting non-flush non-flush non-flush non-flushconnection M8-connector M8-connector M12-connector cablearticle-no. * IN120274 * IN1202A3output signal pnp, nc pnp, nc pnp, nc pnp, nc

article-no. IN121170 * * *output signal npn, no npn, no npn, no npn, no


* on request


6


TECHNICAL DATAswitching distance (Sn) 2.0mm 2.0mm 4.0mm 4.0mmoutput signal AC, no AC, no see above see above

operating voltage 20 … 250V AC/DC 20 … 250V AC/DC 20 … 250V AC/DC 20 … 250V AC/DCcurrent consumption (w/o load) ≤ 15mA ≤ 15mA ≤ 15mA ≤ 15mAoutput current (max. load) 300mA 300mA 180mA 300mAvoltage drop (max. load) 5.0V AC 5.0V AC 5.0V AC 5.0V ACnorm measuring plate acc. to EN 60947-5-2 acc. to EN 60947-5-2 acc. to EN 60947-5-2 acc. to EN 60947-5-2hysteresis < 15% < 15% < 15% < 15%repeat accuracy acc. to EN 60947-5-2 acc. to EN 60947-5-2 acc. to EN 60947-5-2 acc. to EN 60947-5-2correction factor St37: 1; V2A: approx. 0.7; Ms: approx. 0.4; Al: approx. 0.3; Cu: ca. 0.2 switching frequency 30Hz 30Hz 30Hz 30Hz

display (signal) yellow LED yellow LED yellow LED yellow LEDshort-circuit protection + + + +reverse polarity protection - - - -

dimensions M12x1 M12x1 M12x1 M12x1length (thread/complete) 59mm/70mm 45mm/75mm 40mm/66.5mm 54mm/80mmhousing material nickel-plated brass nickel-plated brass nickel-plated brass nickel-plated brassoperating temperature -25 … +70°C -25 … +70°C -25 … +70°C -25 … +70°Cdegree of protection (EN 60529) IP67 IP67 IP67 IP67

connection 2m PVC-cable, 3-wire MC-connector, 3-pin 2m PVC-cable, 3-wire MC-connector, 3-pinconnection accessories - e.g. VK201034 - e.g. VK201034mounting accessories (universal holder) AY000115 AY000115 AY000115 AY000115mounting accessories (clip) AY000049 AY000049 AY000049 AY000049

standard design standard design standard design standard design article-no. IB125100 IB125130 IN125100 IN125130switching distance (Sn) 2mm 2mm 4mm 4mmoutput signal AC, no AC, no AC, no AC, nomounting flush flush non-flush non-flushconnection cable MC connector cable MC connector

article-no. - - IN125200 IN125230output signal - - AC, nc AC, nc

* on request








standard design short design standard design short design article-no. IA180100 IA180120 IB180100 IB180104switching distance (Sn) 5.0mm 5.0mm 5.0mm 5.0mmoutput signal pnp, no pnp, no pnp, no pnp, nomounting flush flush flush flushconnection cable M12-connector cable cable

article-no. - - IB180200 *output signal pnp, nc pnp, nc pnp, nc pnp, nc

article-no. - - IB181100 *output signal npn, no npn, no npn, no npn, no


* on request


6





dimensions M18x1 M18x1 M18x1 M18x1length (thread/complete) 45mm/71.5mm 25mm/50mm 35mm/60mm 40mm/50mmhousing material nickel-plated brass nickel-plated brass stainl. steel stainl. steeloperating temperature -25 … +70°C -25 … +70°C -25 … +70°C -25 … +70°Cdegree of protection (EN 60529) IP67 IP67 IP67 IP67


standard design short design top-series top-series article-no. IB180121 IB180125 IB180123 IB1801A3switching distance (Sn) 5.0mm 5.0mm 7.0mm 7.0mmoutput signal pnp, no pnp, no pnp, no pnp, nomounting flush flush flush flushconnection M12-connector M12-connector M12-connector cable

article-no. IB180221 IB180225 IB180223 *output signal pnp, nc pnp, nc pnp, nc pnp, nc

article-no. IB181121 - * *output signal npn, no npn, no npn, no npn, no

article-no. IB181221 - * *output signal npn, nc npn, nc npn, nc npn, nc

* on request








preferential series preferential series standard design short designarticle-no. IM180100 IM180120 IN180100 IN180104switching distance (Sn) 8.0mm 8.0mm 8.0mm 8.0mmoutput signal pnp, no pnp, no pnp, no pnp, nomounting non-flush non-flush non-flush non-flushconnection cable M12-connector cable cable

article-no. - - * IN180204output signal pnp, nc pnp, nc pnp, nc pnp, nc

article-no. - - IN181100 *output signal npn, no npn, no npn, no npn, no


* on request


6







standard design short design top-series top-series article-no. IN180121 IN180125 IN180123 IN1801A3switching distance (Sn) 10.0mm 10.0mm 12.0mm 12.0mmoutput signal pnp, no pnp, no pnp, no pnp, nomounting non-flush non-flush non-flush non-flushconnection M12-connector M12-connector M12-connector cable

article-no. IN180221 IN180225 * *output signal pnp, nc pnp, nc pnp, nc pnp, nc

article-no. IN181121 * * *output signal npn, no npn, no npn, no npn, no


* on request







connection 2m PVC-cable, 2-wire MC-connector, 3-pin 2m PVC-cable, 2-wire MC-connector, 3-pinconnection accessories - e.g. VK201034 - e.g. VK201034mounting accessories (universal holder) AY000117 AY000117 AY000117 AY000117mounting accessories (clip) AY000051 AY000051 AY000051 AY000051

standard design standard design standard design standard design article-no. IB185100 IB185130 IN185100 IN185130switching distance (Sn) 5.0mm 5.0mm 8.0mm 8.0mmoutput signal AC, no AC, no AC, no AC, nomounting flush flush non-flush non-flushconnection cable MC connector cable MC connector

article-no. IB185200 IB185230 IN185200 IN185230output signal AC, nc AC, nc AC, nc AC, nc

* on request


6





dimensions M30x1.5 M30x1.5 M30x1.5 M30x1.5length (thread/complete) 51mm/60mm 44mm/70mm 51mm/60mm 44mm/70mmhousing material nickel-plated brass nickel-plated brass nickel-plated brass nickel-plated brassoperating temperature -25 … +70°C -25 … +70°C -25 … +70°C -25 … +70°Cdegree of protection (EN 60529) IP67 IP67 IP67 IP67

connection 2m PVC cable, 3-wire M12-connector, 3-pin 2m PVC cable, 3-wire M12-connector, 3-pin connection accessories - e.g. VK200025 - e.g. VK200025 mounting accessories (clip) AY000061 AY000061 AY000061 AY000061

preferential series preferential series standard design standard designarticle-no. IA300100 IA300120 IB300100 IB300121switching distance (Sn) 10mm 10mm 10mm 10mmoutput signal pnp, no pnp, no pnp, no pnp, nomounting flush flush flush flushconnection cable M12-connector cable M12-connector

article-no. - - * *output signal pnp, nc pnp, nc pnp, nc pnp, nc

article-no. - - IB301100 *output signal npn, no npn, no npn, no npn, no


* on request






dimensions M30x1.5 M30x1.5 M30x1.5 M30x1.5length (thread/complete) 44mm/70mm 51mm/60mm 35mm/60mm 30mm/70mmhousing material stainl. steel stainl. steel nickel-plated brass nickel-plated brassoperating temperature -25 … +70°C -25 … +70°C -25 … +70°C -25 … +70°Cdegree of protection (EN 60529) IP67 IP67 IP67 IP67

connection M12-connector, 3-pin 2m PUR cable, 3-wire 2m PVC cable, 3-wire M12-connector, 3-pin connection accessories e.g. VK200025 - - e.g. VK200025 mounting accessories (clip) AY000061 AY000061 AY000061 AY000061

top-series top-series preferential series preferential seriesarticle-no. IB300123 IB3001A3 IM300100 IM300120switching distance (Sn) 15mm 15mm 15mm 15mmoutput signal pnp, no pnp, no pnp, no pnp, nomounting flush flush non-flush non-flushconnection M12-connector cable cable M12-connector

article-no. * * - -output signal pnp, nc pnp, nc pnp, nc pnp, nc

article-no. * * - -output signal npn, no npn, no npn, no npn, no

article-no. * * - -output signal npn, nc npn, nc npn, nc npn, nc

* on request


6





dimensions M30x1.5 M30x1.5 M30x1.5 M30x1.5length (thread/complete) 35mm/60mm 30mm/70mm 30mm/70mm 36mm/60mmhousing material nickel-plated brass nickel-plated brass stainl. steel stainl. steeloperating temperature -25 … +70°C -25 … +70°C -25 … +70°C -25 … +70°Cdegree of protection (EN 60529) IP67 IP67 IP67 IP67

connection 2m PVC cable, 3-wire M12-connector, 3-pin M12-connector, 3-pin 2m PUR cable, 3-wireconnection accessories - e.g. VK200025 e.g. VK200025 -mounting accessories (clip) AY000061 AY000061 AY000061 AY000061

standard design standard design top-series top-series article-no. IN300100 IN300121 IN300123 IN3001A3switching distance (Sn) 20mm 20mm 20mm 20mmoutput signal pnp, no pnp, no pnp, no pnp, nomounting non-flush non-flush non-flush non-flushconnection cable M12-connector M12-connector cable

article-no. IN300200 IN300221 * *output signal pnp, nc pnp, nc pnp, nc pnp, nc



* on request






dimensions M30x1.5 M30x1.5 M30x1.5 M30x1.5length (thread/complete) 60mm/82mm 60mm/89mm 50mm/81mm 37mm/80mmhousing material nickel-plated brass nickel-plated brass nickel-plated brass nickel-plated brassoperating temperature -25 … +70°C -25 … +70°C -25 … +70°C -25 … +70°Cdegree of protection (EN 60529) IP67 IP67 IP67 IP67

connection 2m PVC-cable, 2-wire MC-connector, 3-pin 2m PVC-cable, 2-wire MC-connector, 3-pinconnection accessories - e.g. VK201034 - e.g. VK201034mounting accessories (clip) AY000061 AY000061 AY000061 AY000061

standard design standard design standard design standard designarticle-no. IB305100 IB305130 IN305100 IN305130switching distance (Sn) 10mm 10mm 15mm 15mmoutput signal AC, no AC, no AC, no AC, nomounting flush flush non-flush non-flushconnection cable MC connector cable MC connector

article-no. IB305200 IB305230 IN305200 IN305230output signal AC, nc AC, nc AC, nc AC, nc

* on request


6


connection

3-pin PNP, no 3-pin PNP, nc

3-pin NPN, no 3-pin NPN, nc

wire colors: bn = brown (1), bu = blue (3), bk = black (4)

For devices with M12-connector and normally closed contact function (nc), the switching output is wired via PIN2. For this reason a 4-wire cable socket should be used and the connection made via the white wire.

3-pin, PNP, nc, M12-connector 3-pin, NPN, nc, M12-connector

wire colors: bn = brown (1), wh = white (2), bu = blue (3)

3-pin, AC/DC, MC-connector, no 3-pin, AC/DC, MC-connector, nc

wire colors: gn = green (1), rd/bk = red/black (2), rd/wh = red/white (3)

2-pin, AC/DC, no 2-pin, AC/DC, nc

wire colors: bn = brown (1), bu = blue (2)



cable socket: M8, angular M8, straight M12, angularnumber of pins (assigned): 3-pin 3-pin 3-pin

article-no. VK200071 VK200075 VK200021length 2m 2m 2m

article-no. VK500071 VK500075 VK500021 length 5m 5m 5m

article-no. VKA00071 VKA00075 VKA0002length 10m 10m 10m

cable socket: M12, straight MC, angular MC, straightnumber of pins (assigned): 3-pin 3-pin 3-pin

article-no. VK200025 VK201030 VK201034length 2m 2m 2m

article-no. VK500025 - - length 5m - -

article-no. VKA00025 - - length 10m - -


6


ACCESSORIESarticle-no. description dimensions fig.

AY000044 quick clip 4, plastic sensor 4round, mounting clip 1AY000045 quick clip 5, plastic sensor 5round, mounting clip 1AY000046 quick clip 6.5, plastic sensor 6.5round, mounting clip 1AY000047 quick clip 8, plastic sensor 8round, mounting clip 1AY000048 quick clip 8, plastic sensor 8round, mounting clip, positive stop 1

AY000049 quick clip 12, plastic sensor 12round, mounting clip 2AY000050 quick clip 12, plastic sensor 12round, mounting clip, positive stop 2AY000051 quick clip 18, plastic sensor 18round, mounting clip 3AY000052 quick clip 18, plastic sensor 18round, mounting clip, positive stop 3AY000061 quick clip 30, plastic sensor 30round, mounting clip 4AY000062 quick clip 30, plastic sensor 30round, mounting clip, positive stop 4

AY000053 base, straight, plastic for quick clip 12 + 18round 5AY000054 base, angular, plastic for quick clip 12 + 18round 6AY000055 label, white for quick clip 12 + 18 + 30round without

mounting material / quick clips

fig. 1 fig. 2 fig. 3

dimension A = sensor diameter


example



ACCESSORIESarticle-no. description note

AY000088 base module * flanges: stainless steel, ball pins: galvanized steelAY000115 mounting kit for M5, M8, M12 sensors stainless steelAY000117 mounting kit for M18 sensors stainless steel

* The AY000088 base module is contained in every mounting kit.Material of bolts and nuts: galvanized steel

universal mounting AY000115consisting of base module … … and fitting panel



6


NOTES



P LED display of the switching signal

P outstanding impermeability

P high switching frequency up to 5kHz

P connection with M8- or M12-connector

IO-Link-capable devicesrobust metal housing

descriptionIO-Link is a globally standardized IO technology (IEC 61131-9) for communicating with sensors as well as actuators. The powerful point-to-point communication is based on the well-established three-conductor sensor and actuator connection. It allows additional information, e.g., damping, sensor failure or switching frequency as well as the setting of sensor parameters such as switching performance, timer functions, etc., to be communicated without any additional requirements on the cable material.An inductive sensor (proximity switch, position sensor, initi-ator) is a contactless switch which reliably detects metallic objects. In the case of inductive sensors, a correction factor is stated which evaluates the reduction of the switching distance in relation to the different materials that the object is made from. This factor depends on the type, characteristics (internal structure), size and geometry of the material that the object to be detected is made from. The stated switching distance value relates to steel St37 (factor 1 steel). In order to assess the approximate switching distance for materials which differ from this, the value has to be multiplied by the appropriate

correction factor.To achieve the maximum switching distance, the size and cha-racteristics of the object to be detected (norm measuring plate and/or flat surface) are to be taken into account.A further important feature of these sensors is the cast electro-nics in a stable, metal housing. As a consequence of the com-pound, the electronics are perfectly protected from vibrations. The devices are thus also largely sealed against liquids (degree of protection IP67).The ambient temperature can be up to +70°C. In addition, these sensors work through the contactless detection of the object, without wear and tear.

application examplesu integration in machine parts in the automation technologyu checking the presence of metal parts with various dimensi-

onsu detecting object heights, e.g. metal parts on conveyor beltsu detection of objects through the walls of non-metallic con-

tainers and tubes

dimensions M8x1 M12x1 M18x1 M30x1.5 flush switching distance 1.5 … 10mm

INDUCTIVE SENSORSNORM SWITCHING DISTANCES, IO-LINK 1150

6


TECHNICAL DATAswitching distance (Sn) 1.5mm 2mm 5mm 10mmIO-Link (IEC 61131-9) + + + +output signal PNP, NO PNP, NO PNP, NO PNP, NO

operating voltage 10 … 30V DC 10 … 30V DC 10 … 30V DC 10 … 30V DCcurrent consumption (w/o load) ≤ 10mA ≤ 10mA ≤ 10mA ≤ 10mAoutput current (max. load) 200mA 200mA 200mA 200mAvoltage drop (max. load) 2.0V DC 2.0V DC 2.0V DC 2.0V DCnorm measuring plate 8x8x1mm, FE360 12x12x1mm, FE360 18x18x1mm, FE360 30x30x1mm, FE360hysteresis ≤ 20% ≤ 20% ≤ 20% ≤ 20%repeat accuracy * 0.07mm 0.1mm 0.25mm 0.5mmreadiness delay 100ms 100ms 100ms 100mscorrection factors (St37/Alu/Ms) 1.0 / 0.25 / 0.35 1.0 / 0.35 / 0.5 1.0 / 0.35 / 0.45 1.0 / 0.45 / 0.55correction factors (V2A/Cu) 0.7 / 0.2 0.85 / 0.3 0.75 / 0.3 0.8 / 0.4switching frequency 5000Hz 3000Hz 2000Hz 1200Hz


dimensions M8x1 M12x1 M18x1 M30x1.5length (thread/complete) 30mm / 45mm 51mm / 60mm 42mm / 63.5mm 42mm / 63.5mmhousing material V2A nickel-plated brass nickel-plated brass nickel-plated brassmaterial (active surface) PA12 PBTP PBTP PBTPoperating temperature -25 … +70°C -25 … +70°C -25 … +70°C -25 … +70°Cdegree of protection (EN 60529) IP67 IP67 IP67 IP67

connection M8-connector, 3-pin M12-connector, 3-pin M12-connector, 3-pin M12-connector, 3-pinconnection accessories e.g. VK200075 e.g. VK200025 e.g. VK200025 e.g. VK200025mounting accessories (clip) e.g. AY000047 e.g. AY000049 e.g. AY000051 e.g. AY000061mounting accessories (universal holder) AY000115 AY000115 AY000117 -

* at 20 … 30V DC and 18 … 28C°

article-no. IA080171 IA120121 IA180121 IA300121switching distance 1.5mm 2mm 5mm 10mmoutput PNP, NO PNP, NO PNP, NO PNP, NOconnection M8-connector M12-connector M12-connector M12-connector

INDUCTIVE SENSORS1150 NORM SWITCHING DISTANCES, IO-LINK


connection

connector devices

1 = L+, 3 = L-, 4 = PNP NO

wire color: 1 = BN (brown), 3 = BU (blue), 4 = BK (black)

mounting parameters

M8 flush mounting M12

M18 M30

INDUCTIVE SENSORSNORM SWITCHING DISTANCES, IO-LINK 1150

6


This data sheet as well as your personal contact can be found at www.ipf-electronic.com

mounting accessories (universal holder) AY000115, AY000117

consisting of base module … and fitting panel

ACCESSORIESarticle-no. description noteAY000088 base module* jaw: stainless steel, ball pin: galvanized steelAY000115 mounting kit for M5, M8, M12 sensors stainless steelAY000117 mounting kit for M18 sensors stainless steel


The IODD files necessary for the IO-Link functionality can be downloaded from our homepage upon entry of the article number.

This data sheet only contains the available standard variants. For other output / connection variants, we kindly ask that you contact us.

We are happy to supply the right cable socket for the plug equipment. You will find a list in the “accessories” section of the catalog under -SENSORFLEX® “cable sockets” or in the search window on our homepage www.ipf-electronic.com (using the search term “VK”).


INDUCTIVE SENSORS1150 NORM SWITCHING DISTANCES, IO-LINK


plus

-ser

iesup to 3-fold norm switching distance

6

INDUCTIVE SENSORSINCREASED SWITCHING DISTANCES 1200


NOTES

INDUCTIVE SENSORS1200 INCREASED SWITCHING DISTANCES


P metal sleeve made of stainl. steel or chrome-plated brass

P LED display

P integrated amplifier

P threaded devices acc. to European standards

P high switching frequency and switching distances

P connection via cable and M8/M12-connector

up to 3-fold norm switching distancerobust metal housing

descriptionipf electronic’s plus series inductive proximity switches are characterized by long switching distances. The devices work in a way which is similar to conventional proximity switches.However the oscillator and the downstream signal evaluation unit are configured differently, whereby significantly better stability is achieved in terms of temperature. This enables the switching point to be rescheduled so that longer switching distances are achieved.Plus series devices are preferably put to use in applications where a long switching distance has to be achieved, but the space does not allow for a correspondingly large standard device. Further fields of application can be found where the limited switching distance of standard sensors do not guaran-tee reliable operation, e.g. when detecting sheet metal parts

with large mechanical tolerances.For attaining the maximum switching distance, attention should be paid concerning the size of the object (norm measu-ring plate) and the kind of surface (level surface). For the relia-ble operation of the devices, it is essential that the installation conditions on the following pages are adhered to.

application examplesu inspection of die-cut metal parts of various sizes using dif-

ferent switching distancesu integration, even in machine partsu detection of objects through the walls of non-metallic con-

tainers and tubes

dimensions 3round M4x0.5 4round M5x0.5 6.5round M8x1 M12x1 M18x1 M30x1.5

flush switching distance 1 to 1.5mmsemi-flush switching distance 3 to 22mmnon-flush switching distance 6 to 40mm

6




I inductive sensorIB flush

IN non-flush



switching distance / norm measuring plateThe distance to the sensor surface, where a metal causes a change in the switching state, is called switching distance. This distance is not the same for all metals. That is why a so-called correction factor has been specified for the respective metal, e.g. copper or aluminum. The nominal switching distance Sn is determined by a norm measuring plate. This is a quadratic metal plate made from steel (St37) with a thickness of 1mm and a smoothed surface. The edge length is 3 x Sn if 3 x Sn is larger than the diameter of the active surface, otherwise the edge length is the same as the diameter of the active surface.One differentiates between the normal switching distance Sn, which is determined without consideration for manufacturing tolerances or external influences, and the operational switching distance Sa.The safe operational switching distance is between 0 and 81% of Sn (0< Sa< 0.81 x Sn).switching hysteresis



During the approach and subsequent removal of the measuring plate from the initiator there will be a difference between switch-on point and switch-off point. This integrated hysteresis prevents the switching output from oscillating during mechanical vibrations. Usually the hysteresis is between 5 to 15% of Sn.

series connectionTo be operationally safe the connection in series of 3-wire PNP sensors requires a logical AND-gate, e.g. VL250100.

parallel connectionA logical OR-gate, e.g. the VL250120, can be used to facilitate the connection in parallel.

mountingFor the reliable operation of the devices, it is essential that the installation conditions are adhered to.

switching frequencyThe switching frequency states the maximum number of available switching operations per second. Every switching operation of the inductive proximity switch causes the oscillating circuit to move. The time needed for the oscillation puts a limit on the switching frequency. For half the nominal switching distance the pulse to pause ratio should be at least 1 : 2,i.e. when choosing the right proximity switch, a compromise needs to be made between the size of the sensor and the switching frequency. General rule: The larger the sensor, the lower the switching frequency.

tightening torquesTo avoid damage when mounting proximity switches, never exceed the specified tightening torques.

stainless steel thread chrome-plated brass threadM4 = 0.8Nm M8 = 4NmM5 = 1.5Nm M12 = 10NmM8 = 6Nm M18 = 25NmM12 = 20Nm M30 = 70NmM18 = 50Nm


6



nominal switching distance (Sn):The distance at which a metal part that is approaching the active surface of the proximity switch causes a status change in the state of the switching output.

output function:normally open: Object within the area of the active switching zone – output switchednormally closed: Object within the area of the active switching zone – output inhibited


repeat accuracy The repeat accuracy (according to IEC 60947-5-2 / EN 60947-5-2) is the repeat accuracy of the real switching distance Sr over a period of 8 hours at an ambient temperature of (23 ± 5)°C and a defined operating voltage Vs. The specified repeat accuracy corresponds to this definition. Generally the repeat accuracy is considerably better in case of sequent measurements.






TECHNICAL DATAswitching distance (Sn) 1mm 1mm 1mm 1mmoutput signal see above see above see above see above

operating voltage 10 … 30V DC 10 … 30V DC 10 … 30V DC 10 … 30V DCcurrent consumption (w/o load) ≤ 10mA ≤ 10mA ≤ 10mA ≤ 10mAoutput current (max. load) 100mA 100mA 100mA 100mAvoltage drop (max. load) 2.0V DC 2.0V DC 2.0V DC 2.0V DCnorm measuring plate 3x3x1mm, FE360 3x3x1mm, FE360 4x4x1mm, FE360 4x4x1mm, FE360hysteresis typ. < 10% typ. < 10% typ. < 10% typ. < 10%repeat accuracy 0.02mm 0.02mm 0.02mm 0.02mmcorrection factors (St37/Alu/Ms) 1.0 / 0.5 / 0.6 1.0 / 0.5 / 0.6 1.0 / 0.5 / 0.6 1.0 / 0.5 / 0.6correction factors (stainl. steel/Cu) 0.8 / 0.45 0.8 / 0.45 0.8 / 0.45 0.8 / 0.45switching frequency 3kHz 3kHz 3kHz 3kHz


dimensions Ø 3mm Ø 3mm M4x0.5 M4x0.5housing material stainless steel 1.4305 stainless steel 1.4305 stainless steel 1.4305 stainless steel 1.4305length (thread/complete) - / 22mm - / 22mm 16mm / 22mm 16mm / 22mmoperating temperature -25 … +70°C -25 … +70°C -25 … +70°C -25 … +70°Cdegree of protection (EN 60529) IP67 IP67 IP67 IP67

connection 2m PUR cable M8 cable connector 2m PUR cable M8 cable connector 3-pin 3-pinconnection accessories - e.g. VK200075 - e.g. VK200075mounting accessories (clip) - - AY000044 AY000044

article-no. IBR30106 IBR30176 IB040106 IB040176output signal pnp, no pnp, no pnp, no pnp, noswitching distance 1mm 1mm 1mm 1mmversion Ø 3mm Ø 3mm M4x0.5 M4x0.5mounting flush flush flush flushconnection 2m PUR cable M8 cable connector 2m PUR cable M8 cable connector

article-no. IBR30206 IBR30276 IB040206 IB040276output signal pnp, nc pnp, nc pnp, nc pnp, nc


article-no. * * * *output signal npn, nc npn, nc npn, nc npn, nc* on request

6




operating voltage 10 … 30V DC 10 … 30V DC 10 … 30V DC 10 … 30V DCcurrent consumption (w/o load) ≤ 10mA ≤ 10mA ≤ 10mA ≤ 10mAoutput current (max. load) 200mA 200mA 200mA 200mAvoltage drop (max. load) 2.0V DC 2.0V DC 2.0V DC 2.0V DCnorm measuring plate 4.5x4.5x1mm, FE360 4.5x4.5x1mm, FE360 5x5x1mm, FE360 5x5x1mm, FE360hysteresis typ. < 10% typ. < 10% typ. < 10% typ. < 10%repeat accuracy 0.03mm 0.03mm 0.03mm 0.03mmcorrection factors (St37/Alu/Ms) 1.0 / 0.4 / 0.5 1.0 / 0.4 / 0.5 1.0 / 0.4 / 0.5 1.0 / 0.4 / 0.5correction factors (stainl. steel/Cu) 0.75 / 0.4 0.75 / 0.4 0.75 / 0.4 0.75 / 0.4switching frequency 3kHz 3kHz 3kHz 3kHz


dimensions Ø 4mm Ø 4mm M5x0.5 M5x0.5housing material stainless steel 1.4305 stainless steel 1.4305 stainless steel 1.4305 stainless steel 1.4305length (thread/complete) - / 25mm - / 38mm 20mm / 25mm 23mm /38mmoperating temperature -25 … +70°C -25 … +70°C -25 … +70°C -25 … +70°Cdegree of protection (EN 60529) IP67 IP67 IP67 IP67

connection 5m PUR cable M8-connector, 3-pin 5m PUR cable M8-connector, 3-pinconnection accessories - e.g. VK200075 - e.g. VK200075mounting accessories (clip) AY000044 AY000044 AY000045 AY000045mounting accessories - - AY000115 AY000115(universal holder)

article-no. IBR40106 IBR40176 IB050106 IB050176output signal pnp, no pnp, no pnp, no pnp, noswitching distance 1.5mm 1.5mm 1.5mm 1.5mmversion Ø 4mm Ø 4mm M5x0.5 M5x0.5mounting flush flush flush flushconnection 5m PVC-cable M8-connector 5m PVC-cable M8-connector

article-no. IBR40206 * IB050206 IB050276output signal pnp, nc pnp, nc pnp, nc pnp, nc





article-no. IB060106 IB060126 IB060176 output signal pnp, no pnp, no pnp, no switching distance 3mm 3mm 3mm version Ø 6.5mm Ø 6.5mm Ø 6.5mm mounting semi-flush semi-flush semi-flush connection 2m PVC-cable M12-connector M8 connector

article-no. IB060206 * IB060276 output signal pnp, nc pnp, nc pnp, nc

article-no. * * * output signal npn, no npn, no npn, no

article-no. * * * output signal npn, nc npn, nc npn, nc* on request

TECHNICAL DATAswitching distance (Sn) 3mm 3mm 3mm output signal see above see above see above

operating voltage 10 … 30V DC 10 … 30V DC 10 … 30V DC current consumption (w/o load) ≤ 10mA ≤ 10mA ≤ 10mA output current (max. load) 200mA 200mA 200mA voltage drop (max. load) 2.0V DC 2.0V DC 2.0V DC norm measuring plate 9x9x1mm, FE360 9x9x1mm, FE360 9x9x1mm, FE360 hysteresis typ. < 10% typ. < 10% typ. < 10% repeat accuracy 0.15mm 0.15mm 0.15mm correction factors (St37/Alu/Ms) 1.0 / 0.26 / 0.35 1.0 / 0.26 / 0.35 1.0 / 0.26 / 0.35correction factors (stainl. steel/Cu) 0.67 / 0.18 0.67 / 0.18 0.67 / 0.18switching frequency 1kHz 1kHz 1kHz

display (signal) yellow LED yellow LED yellow LED short-circuit protection + + + reverse polarity protection + + +

dimensions Ø 6.5mm Ø 6.5mm Ø 6.5mm housing material chrome-plated brass chrome-plated brass chrome-plated brass length (thread/complete) - / 45mm - / 66mm - / 60mm operating temperature -25 … +70°C -25 … +70°C -25 … +70°C degree of protection (EN 60529) IP67 IP67 IP67

connection 2m PVC-cable M12-connector, 3-pin M12-connector, 3-pin connection accessories - e.g. VK200025 e.g. VK200075mounting accessories (clip) AY000046 AY000046 AY000046

6



article-no. IB080106 IB080126 IB080176 output signal pnp, no pnp, no pnp, noswitching distance 3mm 3mm 3mm version M8x1 M8x1 M8x1 mounting semi-flush semi-flush semi-flush connection 2m PVC-cable M12-connector M8 connector

article-no. IB080206 IB080226 IB080276 output signal pnp, nc pnp, nc pnp, nc

article-no. IB081106 * IB081176 output signal npn, no npn, no npn, no



operating voltage 10 … 30V DC 10 … 30V DC 10 … 30V DC current consumption (w/o load) ≤ 10mA ≤ 10mA ≤ 10mA output current (max. load) 200mA 200mA 200mA voltage drop (max. load) 2.0V DC 2.0V DC 2.0V DC norm measuring plate 9x9x1mm, FE360 9x9x1mm, FE360 9x9x1mm, FE360 hysteresis typ. < 10% typ. < 10% typ. < 10% repeat accuracy 0.15mm 0.15mm 0.15mm correction factors (St37/Alu/Ms) 1.0 / 0.33 / 0.41 1.0 / 0.33 / 0.41 1.0 / 0.33 / 0.41correction factors (stainl. steel/Cu) 0.72 / 0.27 0.72 / 0.27 0.72 / 0.27switching frequency 1kHz 1kHz 1kHz


dimensions M8x1 M8x1 M8x1 housing material chrome-plated brass chrome-plated brass chrome-plated brass length (thread/complete) 45mm / 45mm 44mm / 66mm 45mm / 60mm operating temperature -25 … +70°C -25 … +70°C -25 … +70°C degree of protection (EN 60529) IP67 IP67 IP67

connection 2m PVC-cable M12-connector, 3-pin M8 connector, 3-pin connection accessories - e.g. VK200025 e.g. VK200075 mounting accessories (clip) AY000047 AY000047 AY000047mounting accessories AY000115 AY000115 AY000115(universal holder)



article-no. IN080106 IN080126 IN080176 output signal pnp, no pnp, no pnp, no switching distance 6mm 6mm 6mm version M8x1 M8x1 M8x1 mounting non-flush non-flush non-flush connection 2m PVC-cable M12-connector M8 connector

article-no. IN080206 IN080226 IN080276 output signal pnp, nc pnp, nc pnp, nc

article-no. * * IN081176 output signal npn, no npn, no npn, no



operating voltage 10 … 30V DC 10 … 30V DC 10 … 30V DC current consumption (w/o load) ≤ 10mA ≤ 10mA ≤ 10mA output current (max. load) 200mA 200mA 200mA voltage drop (max. load) 2.0V DC 2.0V DC 2.0V DC norm measuring plate 18x18x1mm, FE360 18x18x1mm, FE360 18x18x1mm, FE360 hysteresis typ. < 10% typ. < 10% typ. < 10% repeat accuracy 0.3mm 0.3mm 0.3mm correction factors (St37/Alu/Ms) 1.0 / 0.47 / 0.55 1.0 / 0.47 / 0.55 1.0 / 0.47 / 0.55correction factors (stainl. steel/Cu) 0.77 / 0.44 0.77 / 0.44 0.77 / 0.44switching frequency 500Hz 500Hz 500Hz


dimensions M8x1 M8x1 M8x1 housing material chrome-plated brass chrome-plated brass chrome-plated brass length (thread/complete) 41mm / 45mm 42mm / 66mm 41mm / 60mm operating temperature -25 … +70°C -25 … +70°C -25 … +70°C degree of protection (EN 60529) IP67 IP67 IP67

connection 2m PVC-cable M12-connector, 3-pin M8 connector, 3-pin connection accessories - e.g. VK200025 e.g. VK200075mounting accessories (clip) AY000047 AY000047 AY000047mounting accessories AY000115 AY000115 AY000115(universal holder)

6




operating voltage 10 … 30V DC 10 … 30V DC 10 … 30V DC 10 … 30V DCcurrent consumption (w/o load) ≤ 10mA ≤ 10mA ≤ 10mA ≤ 10mAoutput current (max. load) 200mA 200mA 200mA 200mAvoltage drop (max. load) 2.0V DC 2.0V DC 2.0V DC 2.0V DCnorm measuring plate 18x18x1mm, FE360 18x18x1mm, FE360 30x30x1mm, FE360 30x30x1mm, FE360hysteresis typ. < 10% typ. < 10% typ. < 10% typ. < 10%repeat accuracy 0.3mm 0.3mm 0.3mm 0.3mmcorrection factors (St37/Alu/Ms) 1.0 / 0.3 / 0.40 1.0 / 0.3 / 0.40 1.0 / 0.49 / 0.56 1.0 / 0.49 / 0.56correction factors (stainl. steel/Cu) 0.7 / 0.25 0.7 / 0.25 0.77 / 0.45 0.77 / 0.45switching frequency 800Hz 800Hz 400Hz 400Hz


dimensions M12x1 M12x1 M12x1 M12x1housing material chrome-plated brass chrome-plated brass chrome-plated brass chrome-plated brasslength (thread/complete) 50mm / 50mm 40mm / 60mm 44mm / 50mm 35mm / 60mmoperating temperature -25 … +70°C -25 … +70°C -25 … +70°C -25 … +70°Cdegree of protection (EN 60529) IP67 IP67 IP67 IP67

connection 2m PVC-cable M12-connector, 3-pin 2m PUR cable M12-connector, 3-pinconnection accessories - e.g. VK200025 - e.g. VK200025mounting accessories (clip) AY000049 AY000049 AY000049 AY000049mounting accessories AY000115 AY000115 AY000115 AY000115(universal holder)

article-no. IB120106 IB120126 IN120106 IN120126output signal pnp, no pnp, no pnp, no pnp, noswitching distance 6mm 6mm 10mm 10mmversion M12x1 M12x1 M12x1 M12x1mounting semi-flush semi-flush non-flush non-flushconnection 2m PVC-cable M12-connector 2m PVC-cable M12-connector

article-no. * IB120226 IN120206 IN120226output signal pnp, nc pnp, nc pnp, nc pnp, nc

article-no. * IB121126 IN121106 IN121126output signal npn, no npn, no npn, no npn, no




TECHNICAL DATAswitching distance (Sn) 12mm 12mm 20mm 20mm output signal see above see above see above see above

operating voltage 10 … 30V DC 10 … 30V DC 10 … 30V DC 10 … 30V DCcurrent consumption (w/o load) ≤ 10mA ≤ 10mA ≤ 10mA ≤ 10mAoutput current (max. load) 200mA 200mA 200mA 200mAvoltage drop (max. load) 2.0V DC 2.0V DC 2.0V DC 2.0V DCnorm measuring plate 36x36x1mm, FE360 36x36x1mm, FE360 60x60x1mm, FE360 60x60x1mm, FE360hysteresis typ. < 10% typ. < 10% typ. < 10% typ. < 10%repeat accuracy 0.6mm 0.6mm 1mm 1mmcorrection factors (St37/Alu/Ms) 1.0 / 0.26 / 0.33 1.0 / 0.26 / 0.33 1.0 / 0.40 / 0.45 1.0 / 0.40 / 0.45correction factors (stainl. steel/Cu) 0.63 / 0.20 0.63 / 0.20 0.66 / 0.35 0.66 / 0.35switching frequency 500Hz 500Hz 200Hz 200Hz


dimensions M18x1 M18x1 M18x1 M18x1housing material chrome-plated brass chrome-plated brass chrome-plated brass chrome-plated brasslength (thread/complete) 50mm / 50mm 42mm / 63.5mm 40mm / 50mm 32mm / 63.5mmoperating temperature -25 … +70°C -25 … +70°C -25 … +70°C -25 … +70°Cdegree of protection (EN 60529) IP67 IP67 IP67 IP67

connection 2m PVC-cable M8-connector, 3-pin 2m PVC-cable M12-connector, 3-pinconnection accessories - e.g. VK200025 - e.g. VK200025mounting accessories (clip) AY000051 AY000051 AY000051 AY000051mounting accessories AY000117 AY000117 AY000117 AY000117(universal holder)

article-no. IB180106 IB180126 IN180106 IN180126output signal pnp, no pnp, no pnp, no pnp, noswitching distance 12mm 12mm 20mm 20mmversion M18x1 M18x1 M18x1 M18x1mounting semi-flush semi-flush non-flush non-flushconnection 2m PVC-cable M12-connector 2m PVC-cable M12-connector

article-no. IB180206 IB180226 IN180206 IN180226output signal pnp, nc pnp, nc pnp, nc pnp, nc

article-no. * IB181126 IN181106 IN181126output signal npn, no npn, no npn, no npn, no


6



TECHNICAL DATAswitching distance (Sn) 22mm 22mm 40mm 40mm output signal see above see above see above see above

operating voltage 10 … 30V DC 10 … 30V DC 10 … 30V DC 10 … 30V DCcurrent consumption (w/o load) ≤ 10mA ≤ 10mA ≤ 10mA ≤ 10mAoutput current (max. load) 100mA 100mA 100mA 100mAvoltage drop (max. load) 2.0V DC 2.0V DC 2.0V DC 2.0V DCnorm measuring plate 66x66x1mm, FE360 66x66x1mm, FE360 120x120x1mm, FE360 120x120x1mm, FE360hysteresis typ. < 10% typ. < 10% typ. < 10% typ. < 10%repeat accuracy 1.1mm 1.1mm 2mm 2mmcorrection factors (St37/Alu/Ms) 1.0 / 0.40 / 0.45 1.0 / 0.40 / 0.45 1.0 / 0.42 / 0.47 1.0 / 0.42 / 0.47correction factors (stainl. steel/Cu) 0.66 / 0.35 0.66 / 0.35 0.78 / 0.37 0.78 / 0.37switching frequency 200Hz 200Hz 100Hz 100Hz


dimensions M30x1.5 M30x1.5 M30x1.5 M30x1.5housing material chrome-plated brass chrome-plated brass chrome-plated brass chrome-plated brasslength (thread/complete) 60mm / 60mm 52mm / 73.5mm 50mm / 60mm 42mm / 73.5mmoperating temperature -25 … +70°C -25 … +70°C -25 … +70°C -25 … +70°Cdegree of protection (EN 60529) IP67 IP67 IP67 IP67

connection 2m PVC-cable M12-connector, 3-pin 2m PVC-cable M12-connector, 3-pinconnection accessories - e.g. VK200025 - e.g. VK200025mounting accessories (clip) AY000061 AY000061 AY000061 AY000061

article-no. IB300106 IB300126 IN300106 IN300126output signal pnp, no pnp, no pnp, no pnp, noswitching distance 22mm 22mm 40mm 40mm version M30x1.5 M30x1.5 M30x1.5 M30x1.5mounting semi-flush semi-flush non-flush non-flushconnection 2m PVC-cable M12-connector 2m PVC-cable M12-connector

article-no. * IB300226 * IN300226output signal pnp, nc pnp, nc pnp, nc pnp, nc

article-no. IB301106 IB301126 * IN301126output signal npn, no npn, no npn, no npn, no




correction factors

steel (St37) 1.0 steel (St37) 1.0stainless steel 0.72 stainless steel 0.77aluminum 0.33 aluminum 0.47copper 0.27 copper 0.44brass 0.41 brass 0.55

correction factors


correction factors


IBR301X6, IB0401X6 IBR401X6

IB0501X6 IB0601X6 flush mounting response curve flush mounting response curve

IB0801X6 IN0801X6 flush mounting response curve non-flush mounting response curve

6



correction factors


correction factors


correction factors


IB1201X6 IN1201X6 semi-flush mounting response curve non-flush mounting response curve





cable socket M8, angular M8, straight M12, angular M12, angularnumber of pins 3-pin 3-pin 3-pin 4-pin

article-no. VK200071 VK200075 VK200021 VK200321length 2m 2m 2m 2m

article-no. VK500071 VK500075 VK500021 VK500321length 5m 5m 5m 5m

article-no. VKA00071 VKA00075 VKA00021 VKA00321length 10m 10m 10m 10m

switching output pnp, no pnp, nc

switching output npn, no

For devices with M12-connector and normally closed contact function (nc), the switching output is wired via PIN2. For this reason a 4-pin cable socket (e.g. VK200325) should be used and the connection made via the white wire.

wire colors: bn = brown (1), wh = white (2), bu = blue (3), bk = black (4)

6



We will be pleased to supply the matching mounting material for your devices. Please refer to the list in catalog chapter “accessories” under “mounting material” or “quick clips“

ACCESSORIESarticle-no. description material

AY000088 base module * flanges: stainless steel, ball pins: galvanized steelAY000115 mounting kit for sensors M5x1 stainless steelAY000115 mounting kit for sensors M8x1 stainless steelAY000115 mounting kit for sensors M12x1 stainless steelAY000117 mounting kit for sensors M18x1 stainless steel

* The AY000088 base module is contained in every mounting kit. Material of bolts and nuts: galvanized steel

ACCESSORIES sensor- materialarticle-no. description diameter article / bolts

AY000044 quick clip 4mm PA6 / galvanized steelAY000045 quick clip 5mm PA6 / galvanized steelAY000046 quick clip 6.5mm PA6 / galvanized steelAY000047 quick clip 8mm PA6 / galvanized steelAY000048 quick clip with positive stop 8mm PA6 / galvanized steelAY000049 quick clip 12mm PA6 / galvanized steelAY000050 quick clip with positive stop 12mm PA6 / galvanized steelAY000051 quick clip 18mm PA6 / galvanized steelAY000052 quick clip with positive stop 18mm PA6 / galvanized steelAY000061 quick clip 30mm PA6 / galvanized steelAY000062 quick clip with positive stop 30mm PA6 / galvanized steel

AY000053 straight base for quick clip 12mm, 18mm PA6 / galvanized steelAY000054 angular base for quick clip 12mm, 18mm PA6 / galvanized steel

AY000055 quick clip label 12 … 30mm plastic / -

AY000057 box set with selection of quick clips 4 … 18mm plastic / -


This data sheet contains the standard versions only. Kindly request the availability of other output and connection versions.

We will be pleased to supply the matching cable socket for your devices with connector. Please refer to the list in catalog chapter „accessories“ under „cable sockets -SENSORFLEX®“ or search our website for „VK“.




P increased switching distances

P stainless steel housing or chrome-plated brass


P LED display for easy adjustment

P connection via cable, M8- or M12-connector

dimensions Ø 4mm M5 x 0.5 M8 x 1 M12 x 1 flush switching distance 2.5mmsemi-flush switching distance 4 to 8mm

super plus, up to 4-foldnorm switching distance

descriptionipf electronic’s super plus series inductive proximity switches are characterized by very long switching distances. The devices work in a way which is similar to conventional proximity swit-ches.However the oscillator and the downstream signal evaluation unit are configured differently, whereby significantly better stability in terms of temperature is achieved. This enables the switching point to be rescheduled so that way longer switching distances are achieved.Super Plus series devices are preferably put to use in applica-tions where a long switching distance has to be achieved, but the space does not allow for a correspondingly large standard device. Further fields of application can be found where the limited switching distance of standard sensors do not guaran-tee reliable operation, e.g. when detecting sheet metal parts with large mechanical tolerances.The range of applications in which these inductive sensors can be used extends, for example, from machine/systems

engineering, automotive industry, conveyor technology and packaging industry, technology for the printing/paper indus-tries, chemical engineering and process engineering (as well as many others).For attaining the maximum switching distance, attention should be paid concerning the size of the object (standard target) and the kind of surface (level surface). For reliable operation of the devices, it is essential that the installation conditions on this data sheet are adhered to.

application examplesu integration in automation technology machine partsu checking the presence of metal parts with various dimensi-

onsu detecting object heights, e.g. metal parts on conveyor beltsudetection of objects through the walls of non-metallic con-

tainers and tubes


6


TECHNICAL DATAswitching distance (Sn) 2.5mm 2.5mm 2.5mm 2.5mm output signal see above see above see above see above

operating voltage 10 … 30V DC 10 … 30V DC 10 … 30V DC 10 … 30V DC current consumption (w/o load) ≤ 10mA ≤ 10mA ≤ 10mA ≤ 10mA output current (max. load) 200mA 200mA 200mA 200mA voltage drop (max. load) 2.0V DC 2.0V DC 2.0V DC 2.0V DC norm measuring plate 7.5x7.5x1mm 7.5x7.5x1mm 7.5x7.5x1mm 7.5x7.5x1mm hysteresis < 8% < 8% < 8% < 8% repeat accuracy 0.03mm 0.03mm 0.03mm 0.03mm readiness delay 30ms 30ms 30ms 30mscorrection factor (St/Al/Ms) 1.0/0.28/0.36 1.0/0.28/0.36 1.0/0.33/0.42 1.0/0.33/0.42correction factor (stainl. steel/Cu) 0.6/0.25 0.6/0.25 0.67/0.3 0.67/0.3switching frequency 800Hz 800Hz 800Hz 800Hz

display (switching state) yellow LED yellow LED yellow LED yellow LED short-circuit protection + + + + reverse polarity protection + + + +

dimensions Ø 4mm Ø 4mm M5x0.5 M5x0.5length (thread/complete) -/25mm -/38mm 20mm/25mm 22mm/38mm housing material stainless steel stainless steel stainless steelmaterial (front cap) Noryl Noryl Noryl Noryloperating temperature -25 … +70°C -25 … +70°C -25 … +70°C -25 … +70°C degree of protection (EN 60529) IP67 IP67 IP67 IP67

connection 2m PVC-cable, 3-wire M8-connector, 3-pin 2m PVC-cable, 3-wire M8-connector, 3-pin connection accessories - e.g. VK200075 - e.g. VK200075mounting accessories (clip) AY000044 AY000044 AY000045 AY000045mounting accessories - - AY000115 AY000115(universal holder)

article-no. IBR4010H IBR4017H IB05010H IB05017Hswitching distance (Sn) 2.5mm 2.5mm 2.5mm 2.5mmoutput signal pnp, no pnp, no pnp, no pnp, nomounting flush flush flush flushconnection cable M8-connector cable M8-connector

article-no. * * * *output signal pnp, nc pnp, nc pnp, nc pnp, nc



* on request



article-no. IB08010H IB08012H IB08017Hswitching distance (Sn) 4mm 4mm 4mmoutput signal pnp, no pnp, no pnp, nomounting flush flush flushconnection cable M12-connector M8-connector

article-no. * * *output signal pnp, nc pnp, nc pnp, nc

article-no. * * * output signal npn, no npn, no npn, no

article-no. * * * output signal npn, nc npn, nc npn, nc

* on request

TECHNICAL DATAswitching distance (Sn) 4mm 4mm 4mmoutput signal see above see above see above

operating voltage 10 … 30V DC 10 … 30V DC 10 … 30V DCcurrent consumption (w/o load) ≤ 10mA ≤ 10mA ≤ 10mAoutput current (max. load) 200mA 200mA 200mAvoltage drop (max. load) 2.0V DC 2.0V DC 2.0V DCnorm measuring plate 16x16x1mm 16x16x1mm 16x16x1mmhysteresis < 10% < 10% < 10%repeat accuracy 0.2mm 0.2mm 0.2mmreadiness delay 50ms 50ms 50mscorrection factor (St/Al/Ms) 1.0/0.25/0.35 1.0/0.25/0.35 1.0/0.25/0.35correction factor (stainl. steel/Cu) 0.65/0.22 0.65/0.22 0.65/0.22switching frequency 500Hz 500Hz 500Hz

display (switching state) yellow LED yellow LED yellow LEDshort-circuit protection + + +reverse polarity protection + + +

dimensions M8x1 M8x1 M8x1length (thread/complete) 45mm/45mm 44mm/66mm 45mm/60mmhousing material chrome-plated brass chrome-plated brass chrome-plated brassmaterial (front cap) PBTP PBTP PBTPoperating temperature -25 … +70°C -25 … +70°C -25 … +70°Cdegree of protection (EN 60529) IP67 IP67 IP67

connection 2m PVC-cable, 3-wire M12-connector, 3-pin M8-connector, 3-pinconnection accessories - e.g. VK200025 e.g. VK200075mounting accessories (clip) AY000047 AY000047 AY000047mounting accessories AY000115 AY000115 AY000115(universal holder)


6


TECHNICAL DATAswitching distance (Sn) 8mm 8mmoutput signal see above see above

operating voltage 10 … 30V DC 10 … 30V DCcurrent consumption (w/o load) ≤ 10mA ≤ 10mAoutput current (max. load) 200mA 200mAvoltage drop (max. load) 2.0V DC 2.0V DCnorm measuring plate 32x32x1mm 32x32x1mmhysteresis < 10% < 10%repeat accuracy 0.4mm 0.4mmreadiness delay 50ms 50mscorrection factor (St/Al/Ms) 1.0/0.27/0.36 1.0/0.27/0.36correction factor (stainl. steel/Cu) 0.67/0.23 0.67/0.23switching frequency 400Hz 400Hz

display (signal) yellow LED yellow LEDshort-circuit protection + +reverse polarity protection + +

dimensions M12x1 M12x1length (thread/complete) 50mm/50mm 40mm/60mmhousing material chrome-plated brass chrome-plated brassmaterial (front cap) PBTP PBTPoperating temperature -25 … +70°C -25 … +70°Cdegree of protection (EN 60529) IP67 IP67

connection 2m PVC-cable, 3-wire M12-connector, 3-pinconnection accessories - e.g. VK200025mounting accessories (clip) AY000049 AY000049mounting accessories AY000115 AY000115(universal holder)

article-no. IB12010H IB12012Hswitching distance (Sn) 8mm 8mmoutput signal pnp, no pnp, nomounting semi-flush semi-flushconnection cable M12-connector

article-no. * *output signal pnp, nc pnp, nc

article-no. * *output signal npn, no npn, no

article-no. * *output signal npn, nc npn, nc

* on request



This data sheet contains the standard versions only. Kindly request the availability of other output- and connection functions.



connection

cable device connector device


IBR401XH IB0501XH

flush mounting response curve flush mounting response curve


IB0801XH IB1201XH

flush mounting response curve semi-flush mounting response curve

correction factors


correction factors



6


all-s

teel

sens

ors

uthreaded designucuboid designuhigh-temperature devices

INDUCTIVE SENSORSALL-STEEL SENSORS 1400

6


INDUCTIVE SENSORS1400 ALL-STEEL SENSORS

NOTES


P an innovation of ipf electronic

P all-round stainl. steel (housing, front and rear)

P devices up to 130°C with integrated amplifier


P connection via cable, M8-, M12- or Lemosa-connector

active stainl. steel surface, for multi-limit switches, oil proof versions

descriptionAn important feature of these sensors is the one-piece stain-less steel housing. This means that the active surface of the devices is sealed against fluids and gases, to which the whole housing material is resistant. They are much more resistant to mechanical stress than conventional proximity switches.The IC120104 and IC120105 devices relate to a further devel-opment of the IC120100, specifically for use in roller gap sen-sors. Due to the limited spatial conditions, the length of the housing is reduced to 40mm. In these applications, the devices come into contact with abrasive emulsion. For this reason they have a silicone cable, sealing in the cable exit as well as a special compound. The ambient temperature can reach up to +100°C.The IC2201L0 has been developed, in order to replace mechan-ical multi-limit switches on injection molding machines. Com-pared to these it has the following key advantages: The stain-less steel housing is significantly more robust than the plastic housing of mechanical devices. Apart from this, the IC2201L0

works by detecting objects in a non-contact way, without wear and tear. Due to the identical dimensions, the devices can be exchanged with each other without any problems. With the aid of oblong holes, an adjustment of the switching distance is possible.In the same way as multi-limit switches, any number of devices can be installed directly next to each other, without causing interference. The ambient temperature can reach up to +100°C.

application examplesu integration in machine parts subject to rough industrial

environmentsu checking the presence of metal parts with various dimen-

sionsu detecting object heights, e.g. metal parts on conveyor beltsu detection of objects through the walls of non-metallic con-

tainers and tubes

dimensions M12 x 1mm M18 x 1mm M30 x 1.5mm 12 x 12 x 66mm 22 x 40 x 46mm flush switching distance 2 to 10mmnon-flush switching distance 4mm


6



I inductive sensor

IC all-steel flushIO all-steel non-flush


switching distance / norm measuring plateThe distance to the sensor surface, where a metal causes a change in the switching state, is called switching distance. This distance is not the same for all metals. That is why a so-called correction factor has been specified for the respective metal, e.g. copper or aluminum. The nominal switching distance is determined by a norm measuring plate. This is a quadratic metal plate made from steel (St37) with a thickness of 1mm and a smoothened surface for determining the rated switching distance Sn. The edge length is 3 x Sn if 3 x Sn is larger than the diameter of the active surface, otherwise the edge length is the same as the diameter of the active surface.




One differentiates between the normal switching distance Sn, which is determined without consideration for manufacturing tolerances or external influences, and the operational switching distance Sa.The safe operational switching distance is between 0 and 81% of Sn (0< Sa< 0.81 x Sn).


series connectionTo be operationally safe the connection in series of 3-wire PNP sensors requires a logical AND-gate, e.g. VL250100.

parallel connectionA logical OR-gate, e.g. the VL250120, can be used to facilitate the connection in parallel.

mountingFor the reliable operation of the devices, it is essential that the installation conditions are adhered to.

switching frequencyThe switching frequency states the maximum number of available switching operations per second. Every switching operation of the inductive proximity switch causes the oscillating circuit to move. The time needed for the oscillation puts a limit on the switching frequency. For half the nominal switching distance the pulse to pause ratio should be at least 1 : 2.I.e. when choosing the right proximity switch, a compromise needs to be made between the size of the sensor and the switching frequency. General rule: The larger the sensor, the lower the switching frequency.


stainless steel threadM12 = 20NmM18 = 50NmM30 = 150Nm



6





correction factors:Specify the reduction in the switching distance, if materials other than steel St37 are used. The change in the switching distance depends on the type, characteristics (internal structure), size and the geometry of the material that is to be detected.Typical correction factors can be found in the "Technical Data" list.Aluminum won't be recognized.




Note: Never use these devices in applications where the safety of a person depends on their functionality!



article-no. IC120100 IC120120 IO120120switching distance (Sn) 2mm 2mm 4mmmounting flush flush non-flushoperating temperature -25 ... +70°C -25 ... +70°C -25 ... +70°Cconnection cable M12-connector M12-connector

TECHNICAL DATAswitching distance (Sn) 2mm 2mm 4mmoutput signal pnp, no pnp, no pnp, no

operating voltage 7 … 35V DC 7 … 35V DC 7 … 35V DCcurrent consumption (w/o load) ≤ 15mA ≤ 15mA ≤ 15mAoutput current (max. load) 300mA 300mA 300mAvoltage drop (max. load) 2.0V DC 2.0V DC 2.0V DCnorm measuring plate acc. to EN 60947-5-2 acc. to EN 60947-5-2 acc. to EN 60947-5-2 hysteresis typ. < 15% typ. < 15% typ. < 15%correction factors (St37/Alu/Ms) 1.0 / - / 0.1 1.0 / - / 0.1 1.0 / - / 0.1correction factors (stainl. steel/Cu) 0.6 / - 0.6 / - 0.6 / -switching frequency 40Hz 40Hz 40Hz

display (signal) yellow LED yellow LED yellow LEDshort-circuit protection + + +reverse polarity protection + + +

dimensions M12x1 M12x1 M12x1length (thread/complete) 46mm/58mm 46mm/71mm 37mm/71mmhousing material stainl. steel stainl. steel stainl. steeloperating temperature -25 … +70°C -25 … +70°C -25 … +70°Cdegree of protection (EN 60529) cable side: IP65 connector side: IP65 connector side: IP65 front: IP68 front: IP68 front: IP68

connection 2m PUR-cable, 3-wire M12-connector, 3-pin M12-connector, 3-pin connection accessories - e.g. VK200025 e.g. VK200025


6


TECHNICAL DATAswitching distance (Sn) 5mm 5mm 10mm 10mmoutput signal pnp, no pnp, no pnp, no pnp, no

operating voltage 7 … 35V DC 7 … 35V DC 7 … 35V DC 7 … 35V DCcurrent consumption (w/o load) ≤ 15mA ≤ 15mA ≤ 15mA ≤ 15mAoutput current (max. load) 300mA 300mA 300mA 300mAvoltage drop (max. load) 2.0V DC 2.0V DC 2.0V DC 2.0V DCnorm measuring plate acc. to EN 60947-5-2 acc. to EN 60947-5-2 acc. to EN 60947-5-2 acc. to EN 60947-5-2hysteresis typ. < 15% typ. < 15% typ. < 15% typ. < 15%correction factors (St37/Alu/Ms) 1.0 / - / 0.1 1.0 / - / 0.1 1.0 / - / 0.1 1.0 / - / 0.1correction factors (stainl. steel/Cu) 0.6 / - 0.6 / - 0.6 / - 0.6 / -switching frequency 30Hz 30Hz 30Hz 30Hz


dimensions M18x1 M18x1 M30x1.5 M30x1.5length (thread/complete) 60mm/71mm 60mm/86mm 60mm/71mm 60mm/86mmhousing material stainl. steel stainl. steel stainl. steel stainl. steeloperating temperature -25 … +70°C -25 … +70°C -25 … +70°C -25 … +70°Cdegree of protection (EN 60529) cable side: IP65 connector side: IP65 connector side: IP65 connector side: IP65 front: IP68 front: IP68 front: IP68 front: IP68

connection 2m PUR-cable, 3-wire M12-connector, 3-pin 2m PUR-cable, 3-wire M12-connector, 3-pinconnection accessories - e.g. VK200025 - e.g. VK200025

article-no. IC180100 IC180120 IC300100 IC300120switching distance (Sn) 5mm 5mm 10mm 10mmmounting flush flush flush flushoperating temperature -25 ... +70°C -25 ... +70°C -25 ... +70°C -25 ... +70°Cconnection cable M12-connector cable M12-connector



TECHNICAL DATAswitching distance (Sn) 2mmoutput signal pnp, no

operating voltage 10 … 30V DCcurrent consumption (w/o load) ≤ 15mAoutput current (max. load) 200mAvoltage drop (max. load) 2.0V DCnorm measuring plate acc. to EN 60947-5-2hysteresis typ. < 15%correction factors (St37/Alu/Ms) 1.0 / - / 0.2correction factors (stainl. steel/Cu) 0.6 / -switching frequency 40Hz

display (signal) yellow LEDshort-circuit protection +reverse polarity protection +

dimensions 12x12x66mmlength (thread/complete) -/66mmhousing material stainl. steeloperating temperature -25 … +70°Cdegree of protection (EN 60529) IP65

connection M8-connector, 3-pinconnection accessories e.g. VK200075

article-no. IC130170switching distance (Sn) 2mmmounting flushoperating temperature -25 ... +70°Cconnection M8-connector


6


TECHNICAL DATAswitching distance (Sn) 3mm 3mmoutput signal pnp, no pnp, no

operating voltage 10 … 30V DC 10 … 30V DCcurrent consumption (w/o load) ≤ 15mA ≤ 15mAoutput current (max. load) 200mA 200mAvoltage drop (max. load) 2.0V DC 2.0V DCnorm measuring plate acc. to EN 60947-5-2 acc. to EN 60947-5-2 hysteresis typ. < 15% typ. < 15%correction factors (St37/Alu/Ms) 1.0 / - / 0.25 1.0 / - / 0.25correction factors (stainl. steel/Cu) 0.6 / - 0.6 / -switching frequency 30Hz 30Hz

display (signal) - -short-circuit protection + -reverse polarity protection + +

dimensions M12x1 M12x1length (thread/complete) 40mm/40mm 40mm/40mmhousing material stainl. steel stainl. steeloperating temperature -25 … +100°C -25 … +100°Cdegree of protection (EN 60529) IP67 IP67

connection 2m silicone cable, 3-wire 5m silicone cable, 3-wire connection accessories - -

article-no. IC120104 IC120105switching distance (Sn) 3mm 3mmmounting flush, oil-proof flush, oil-proofoperating temperature -25 ... +100°C -25 ... +100°Cconnection cable cable



TECHNICAL DATAswitching distance (Sn) 2mm 2mmoutput signal pnp, no pnp, no

operating voltage 10 … 30V DC 10 … 30V DCcurrent consumption (w/o load) ≤ 15mA ≤ 15mAoutput current (max. load) 300mA 300mAvoltage drop (max. load) 2.0V DC 2.0V DCnorm measuring plate acc. to EN 60947-5-2 acc. to EN 60947-5-2 hysteresis typ. < 15% typ. < 15%correction factors (St37/Alu/Ms) 1.0 / - / - 1.0 / - / -correction factors (stainl. steel/Cu) 0.25 / - 0.25 / -switching frequency 25Hz 25Hz

display (signal) yellow LED yellow LEDshort-circuit protection + -reverse polarity protection + +

dimensions 22x40x46 22x40x46length (thread/complete) -/- -/-housing material stainl. steel stainl. steeloperating temperature -25 … +100°C -25 … +100°Cdegree of protection (EN 60529) IP65 IP65

connection M12-connector, 3-pin Lemosa mini-connector, 3-pin connection accessories e.g. VK200025 e.g. VK2000L5

article-no. IC220120 IC2201L0switching distance (Sn) 2mm 2mmmounting flush, addable flush, addableoperating temperature -25 ... +100°C -25 ... +100°Cconnection M12-connector Lemosa mini-connector


6


article-no. IC120155 IC1201L0 IC12012Wswitching distance (Sn) 2mm 2mm 2mmmounting flush flush flushoperating temperature -25 ... +130°C -25 ... +130°C -25 ... +130°Cconnection cable Lemosa mini-connector M12-connector

TECHNICAL DATAswitching distance (Sn) 2mm 2mm 2mmoutput signal pnp, no pnp, no pnp, no

operating voltage 7 … 35V DC 7 … 35V DC 7 … 35V DCcurrent consumption (w/o load) ≤ 15mA ≤ 15mA ≤ 15mAoutput current (max. load) 150mA 150mA 150mAvoltage drop (max. load) 2.0V DC 2.0V DC 2.0V DCnorm measuring plate acc. to EN 60947-5-2 acc. to EN 60947-5-2 acc. to EN 60947-5-2hysteresis typ. < 15% typ. < 15% typ. < 15%correction factors (St37/Alu/Ms) 1.0 / - / 0.1 1.0 / - / 0.1 1.0 / - / 0.1correction factors (stainl. steel/Cu) 0.6 / - 0.6 / - 0.6 / -switching frequency 40Hz 40Hz 40Hz

display (signal) yellow LED yellow LED yellow LEDshort-circuit protection + + -reverse polarity protection + + +

dimensions M12x1 M12x1 M12x1length (thread/complete) 45mm/59mm 45mm/70mm 45mm/71mmhousing material stainl. steel stainl. steel stainl. steeloperating temperature -25 … +130°C -25 … +130°C -25 … +130°Cdegree of protection (EN 60529) IP65 IP50 IP65

connection 2m silicone cable, 3-wire Lemosa mini-connector, 3-pin M12-connector, 3-pinconnection accessories - e.g. VK2000L5 e.g. VK200025



TECHNICAL DATAswitching distance (Sn) 5mm 5mm 10mm 10mmoutput signal pnp, no pnp, no pnp, no pnp, no

operating voltage 7 … 35V DC 7 … 35V DC 7 … 35V DC 7 … 35V DCcurrent consumption (w/o load) ≤ 15mA ≤ 15mA ≤ 15mA ≤ 15mAoutput current (max. load) 150mA 150mA 150mA 150mAvoltage drop (max. load) 2.0V DC 2.0V DC 2.0V DC 2.0V DCnorm measuring plate acc. to EN 60947-5-2 acc. to EN 60947-5-2 acc. to EN 60947-5-2 acc. to EN 60947-5-2hysteresis typ. < 15% typ. < 15% typ. < 15% typ. < 15%correction factors (St37/Alu/Ms) 1.0 / - / 0.1 1.0 / - / 0.1 1.0 / - / 0.1 1.0 / - / 0.1correction factors (stainl. steel/Cu) 0.6 / - 0.6 / - 0.6 / - 0.6 / -switching frequency 30Hz 30Hz 30Hz 30Hz

display (signal) yellow LED - yellow LED -short-circuit protection + + + +reverse polarity protection + + + +

dimensions M18x1 M18x1 M30x1.5 M30x1.5length (thread/complete) 60mm/71mm 60mm/83mm 60mm/71mm 60mm/83mmhousing material stainl. steel stainl. steel stainl. steel stainl. steeloperating temperature -25 … +130°C -25 … +130°C -25 … +130°C -25 … +130°Cdegree of protection (EN 60529) IP65 IP50 IP65 IP50

connection 2m silicone cable Lemosa connector 2m silicone cable Lemosa connector 3-wire 3-pin 3-wire 3-pinconnection accessories - e.g. VK500941 - e.g. VK500941

article-no. IC180155 IC180145 IC300155 IC300145switching distance (Sn) 5mm 5mm 10mm 10mmmounting flush flush flush flushoperating temperature -25 ... +130°C -25 ... +130°C -25 ... +130°C -25 ... +130°Cconnection cable Lemosa connector cable Lemosa connector


6


TECHNICAL DATAswitching distance (Sn) 2mmoutput signal pnp, no

operating voltage 10 … 30V DCcurrent consumption (w/o load) ≤ 15mAoutput current (max. load) 200mAvoltage drop (max. load) 2.0V DCnorm measuring plate acc. to EN 60947-5-2hysteresis typ. < 15%correction factors (St37/Alu/Ms) 1.0 / - / 0.2correction factors (stainl. steel/Cu) 0.6 / -switching frequency 40Hz

display (signal) -short-circuit protection +reverse polarity protection +

dimensions 12x12x66mmlength (thread/complete) -/66mmhousing material stainl. steeloperating temperature -25 … +130°Cdegree of protection (EN 60529) IP50

connection Lemosa mini-connector, 3-pinconnection accessories e.g. VK2000L5

article-no. IC1301L0switching distance (Sn) 2mmmounting flushoperating temperature -25 ... +130°Cconnection Lemosa mini-connector



cable socket Lemosa mini, angular Lemosa mini, straight Lemosa, straightnumber of pins (assigned) 3-pin 3-pin 3-pin

article-no. VK2000L0, silicone VK2000L4, silicone -length 2m 2m -

article-no. VK5000L0, silicone VK5000L4, silicone VK500940, silicone length 5m 5m 5m

article-no. VKA000L0, silicone VKA000L4, silicone VKA00940, siliconelength 10m 10m 10m

article-no. VK2000L1, teflon VK2000L5, teflon -length 2m 2m -

article-no. VK5000L1, teflon VK5000L5, teflon VK500941, teflon length 5m 5m 5m

article-no. VKA000L1, teflon VKA000L5, teflon VKA00941, teflonlength 10m 10m 10m

cable socket: M8, straight M12, straightnumber of pins (assigned): 3-pin 3-pin

article-no. VK200075, PUR VK200025, PURlength 2m 2m

article-no. VK500075, PUR VK500025, PURlength 5m 5m

article-no. VKA00075, PUR VKA00025, PURlength 10m 10m

connection




6



NOTES


P active face made of metall

P pressure resistant up to 20bar

P high sensing ranges on steel, brass and aluminium

Poutstanding impermeability, active face IP 68

P LED display for assured switching range

all metal housing made of steel improved EMC resistance

descriptionAn important feature of these sensors is the one-piece stain-less steel housing. This means that the active surface of the devices is sealed against fluids and gases, to which the whole housing material is resistant. They are much more resistant to mechanical stress than conventionalproximity switches.In order to achieve the maximum sensing range, care should be taken with regard to the size of the object (standard target) and its surface characteristics (flat surface). It is recommended to leave the devices projecting out of the metal carrier material by approx. 1mm.Correction factors state the change in the sensing range,

if materials other than steel (1.0037) are used. This factor depends on the type, characteristics (internal structure), size and geometry of the material that the object to be detected is made from. In order to assess the approximate sensing range on materials that differ from steel, the value for steel has to be multiplied by the appropriate correction factor.

application examplesu operation in extreme environments (oil, dirt, pressure)u use where great demands are made in terms of reliability

and longevity

dimensions Ø 6.5mm M8x1 M12x1 M18x1

semi-flush sensing range 2 … 6mm


6

EMC


TECHNICAL DATAsensing range (sn) 2mm 2mm 4mm 6mmmounting semi-flush semi-flush semi-flush semi-flushpressure resistance < 20bar < 20bar < 20bar < 20baroutput signal pnp, no pnp, no pnp, no pnp, no

operating voltage 10 ... 30V DC 10 ... 30V DC 10 ... 30V DC 10 ... 30V DCcurrent consumption (w/o load) ≤ 20mA ≤ 20mA ≤ 14mA ≤ 14mAoutput current (max. load) 200mA 200mA 200mA 200mAvoltage drop (max. load) 2.0V DC 2.0V DC 2.0V DC 2.0V DCnorm target 9x9x1mm, FE360 9x9x1mm, FE360 18x18x1mm, FE360 30x30x1mm, FE360hysteresis (real sensing range sr) 2 ... 20% 2 ... 20% 2 ... 20% 2 ... 20%correction factors (alu / copper) 0.45 / 0.35 0.45 / 0.35 0.45 / 0.35 0.45 / 0.35correction factors (stainl. steel) 0.55 0.55 0.55 0.55sampling frequency 150Hz 150Hz 100Hz 100Hz

status display yellow LED yellow LED yellow LED yellow LEDshort-circut protection + + + +reverse polarity protection + + + +

design Ø 6.5mm M8x1 M12x1 M18x1length (thread/complete) - / 46mm 34mm / 46mm 35mm / 50mm 45mm / 60mmhousing material V4A V4A V4A V4Atemperature range -25 ... +70°C -25 ... +70°C -25 ... +70°C -25 ... +70°Csystem of protection (EN 60529) active face / sensor active face / sensor active face / sensor active face / sensor IP 68/IP67 IP 68/IP67 IP 68/IP67 IP 68/IP67

connection M8-connector, 3-pin M8-connector,, 3-pin M12-connector,,´ 3-pin M12-connector, 3-pinconnection accessories e.g. VK200071 e.g. VK200071 e.g. VK200021 e.g. VK200021mount. accessories (uni-bracket) - AY000115 AY000115 AY000117mounting accessories (clip) AY000046 - - -

article-no. IC060173 IC080173 IC120123 IC180123sensing range 2mm 2mm 4mm 6mm version Ø 6.5mm M8x1 M12x1 M18x1



You also find this data sheet, as well as contact details under www.ipf-electronic.com


AY000046 quick clip Ø 6.5mm PA6/steel zincedAY000088 base modul * flanges: stainless steel, ball pin: steel zincedAY000115 fastening-parts kit for sensors M5, M8, M12 stainless steelAY000117 fastening-parts kit for sensors M18 stainless steel

* The base module AY000088 is included in every fastening-parts kit. Material of the screws and nuts: steel zinced

The list of articles contains the standard versions only. Kindly request the availability of other output- and connection functions.

We will be pleased to supply the matching cable socket for your devices with connector. Please refer to the list in catalog chapter “accessories” under “cable sockets -SENSORFLEX®“ or search our website for “VK”.


connection mounting

connector-devices

wire colors: bn = brown, wh = white, bu = blue, bk = black

mounting accessories (Uni-bracket) AY0000115, AY000117 with base modul ...and fitting panel


6



NOTES


P all-stainless steel housing

P high pressure resistance max. 40 … 100bar

P high switching distances on steel, brass and aluminum

P outstanding impermeability, cable device IP68



dimensions M8x1 M12x1 M18x1 M30x1.5

flush switching distance 3 … 20mmnon-flush switching distance 6 … 40mm

up to 3-fold norm switching distance active surface made from metal

descriptionThe PRO-series from ipf electronic features large switching dis-tances that are on a par with those of the PLUS-series. Thanks to special technology these high switching distances can be achieved not only on steel but also on other metals such as aluminum or brass. A further important characteristic of these sensors is their all-stainless steel housing. This means that the active surface of the devices is sealed against fluids and gases, to which the housing material is resistant. The devices in the PRO-series offer a high resistance to pressure thanks to the comparati-vely thick gauge material of the active surface. The pressure resistance of the devices refers to the active surface and the thread only. In addition they are much more resistant to mechanical loads than usual proximity switches. Attention should be paid to the size of the object (standard target) and the surface condition (even surface) to guarantee the maximum switching distance.For the reliable operation of the devices, it is essential that the installation conditions on the following pages are adhered to. Furthermore it is recommended that the flush devices protru-

de approx. 1.5mm from the metal backing material.The LED status display lights up permanently if the distance between the sensor surface and the object is not more than 80% of the indicated switching distance. The object is reliably detected.In the case of larger distances, (80 to 100% of the indicated switching distance) the LED display flashes.correction factors indicate the change relating to the switching distance if materials other than St37 (steel) are used. The change in the switching distance depends on the type, cha-racteristics (internal structure), size and the geometry of the material that is to be detected. In order to assess the appro-ximate switching distance on the materials which differ from St37, the value for St37 has to be multiplied by the appropriate correction factor.

application examplesuoperation in an extreme environment (oil, dirt, pressure)uuse where a high demand is made in terms of reliability and longevity


6


TECHNICAL DATAswitching distance (Sn) 3mm 3mm 6mm 6mmpressure resistance (max.) 100bar 100bar 100bar 100baroutput signal see above see above see above see above

operating voltage 10 … 30V DC 10 … 30V DC 10 … 30V DC 10 … 30V DCcurrent consumption (w/o load) ≤ 10mA ≤ 10mA ≤ 10mA ≤ 10mAoutput current (max. load) 200mA 200mA 200mA 200mAvoltage drop (max. load) 2.0V DC 2.0V DC 2.0V DC 2.0V DCnorm measuring plate 9x9x1mm, FE360 9x9x1mm, FE360 18x18x1mm, FE360 18x18x1mm, FE360hysteresis ≤ 20% ≤ 20% ≤ 20% ≤ 20%repeat accuracy * ≤ 5% ≤ 5% ≤ 5% ≤ 5%correction factors (St37/Alu/Ms) 1.0 / 1.0 / 1.35 1.0 / 1.0 / 1.35 1.0 / 1.0 / 1.4 1.0 / 1.0 / 1.4correction factors (stainl. steel/Cu) - / 0.9 - / 0.9 - / 0.85 - / 0.85correction factors (V2A: 1mm/2mm) 0.3 / 0.6 0.3 / 0.6 0.3 / 0.9 0.3 / 0.9switching frequency 1000Hz 1000Hz 700Hz 700Hz

display (signal) yellow LED yellow LED yellow LED yellow LEDdisplay (functional reserve) yellow LED, flashing yellow LED, flashing yellow LED, flashing yellow LED, flashingshort-circuit protection + + + +reverse polarity protection + + + +

dimensions M8x1 M8x1 M8x1 M8x1length (thread/complete) 45mm / 45mm 45mm / 60mm 41mm / 45mm 41mm / 60mmhousing material V2A (1.4305) V2A (1.4305) V2A (1.4305) V2A (1.4305)material thickness (active surface) 0.25mm 0.25mm 0.25mm 0.25mmline length (max.) 300m 300m 300m 300moperating temperature -25 … +70°C -25 … +70°C -25 … +70°C -25 … +70°Cdegree of protection (EN 60529) IP68 IP67 IP68 IP67

connection 2m PUR cable, 3-wire M8-connector, 3-pin 2m PUR cable, 3-wire M8-connector, 3-pinconnection accessories - e.g. VK200075 - e.g. VK200075mounting accessories (clip) e.g. AY000047 e.g. AY000047 e.g. AY000047 e.g. AY000047mounting accessories AY000115 AY000115 AY000115 AY000115(universal holder)* at 20 … 30V DC and +18 … +28C°

switching distance 3mm 3mm 6mm 6mm version M8x1 M8x1 M8x1 M8x1mounting flush flush non-flush non-flushconnection cable connector cable connector

article-no. IC080106 IC080176 IO080106 IO080176 output pnp, no pnp, no pnp, no pnp, no

article-no. (on request) IC080276 (on request) (on request) output pnp, nc pnp, nc pnp, nc pnp, nc

article-no. (on request) (on request) (on request) (on request) output npn, no npn, no npn, no npn, no




operating voltage 10 … 30V DC 10 … 30V DC 10 … 30V DC 10 … 30V DCcurrent consumption (w/o load) ≤ 10mA ≤ 10mA ≤ 10mA ≤ 10mAoutput current (max. load) 200mA 200mA 200mA 200mAvoltage drop (max. load) 2.0V DC 2.0V DC 2.0V DC 2.0V DCnorm measuring plate 18x18x1mm, FE360 18x18x1mm, FE360 30x30x1mm, FE360 30x30x1mm, FE360hysteresis ≤ 15% ≤ 15% ≤ 15% ≤ 15%repeat accuracy * 0.3mm 0.3mm 0.5mm 0.5mmcorrection factors (St37/Alu/Ms) 1.0 / 1.0 / 1.3 1.0 / 1.0 / 1.3 1.0 / 1.0 / 1.4 1.0 / 1.0 / 1.4correction factors (stainl. steel/Cu) - / 0.85 - / 0.85 - / 0.8 - / 0.8correction factors (V2A: 1mm/2mm) 0.5 / 0.9 0.5 / 0.9 - / 0.65 - / 0.65switching frequency 600Hz 600Hz 400Hz 400Hz


dimensions M12x1 M12x1 M12x1 M12x1length (thread/complete) 50mm / 50mm 41mm / 60mm 45mm / 50mm 36mm / 60mmhousing material V2A (1.4305) V2A (1.4305) V2A (1.4305) V2A (1.4305)material thickness (active surface) 0.4mm 0.4mm 0.4mm 0.4mmline length (max.) 300m 300m 300m 300moperating temperature -25 … +70°C -25 … +70°C -25 … +70°C -25 … +70°Cdegree of protection (EN 60529) IP68 IP67 IP68 IP67

connection 2m PUR cable, 3-wire M12-connector, 4-pin 2m PUR cable, 3-wire M12-connector, 4-pinconnection accessories - e.g. VK200325 - e.g. VK200325mounting accessories (clip) e.g. AY000049 e.g. AY000049 e.g. AY000049 e.g. AY000049mounting accessories AY000115 AY000115 AY000115 AY000115(universal holder)* at 20 … 30V DC and +18 … +28C°



article-no. (on request) IC120226 IO120206 IO120226 output pnp, nc pnp, nc pnp, nc pnp, nc

article-no. IC121106 IC121126 (on request) (on request) output npn, no npn, no npn, no npn, no


6



operating voltage 10 … 30V DC 10 … 30V DC 10 … 30V DC 10 … 30V DCcurrent consumption (w/o load) ≤ 10mA ≤ 10mA ≤ 10mA ≤ 10mAoutput current (max. load) 200mA 200mA 200mA 200mAvoltage drop (max. load) 2.0V DC 2.0V DC 2.0V DC 2.0V DCnorm measuring plate 30x30x1mm, FE360 30x30x1mm, FE360 60x60x1mm, FE360 60x60x1mm, FE360hysteresis ≤ 15% ≤ 15% ≤ 15% ≤ 15%repeat accuracy * 0.5mm 0.5mm 1mm 1mmcorrection factors (St37/Alu/Ms) 1.0 / 1.0 / 1.2 1.0 / 1.0 / 1.2 1.0 / 1.0 / 1.35 1.0 / 1.0 / 1.35correction factors (stainl. steel/Cu) - / 0.8 - / 0.8 - / 0.9 - / 0.9correction factors (V2A: 1mm/2mm) 0.5 / 0.9 0.5 / 0.9 0.3 / 0.6 0.3 / 0.6switching frequency 200Hz 200Hz 200Hz 200Hz


dimensions M18x1 M18x1 M18x1 M18x1length (thread/complete) 50mm / 50mm 42mm / 63.5mm 43mm / 50mm 35mm / 63.5mmhousing material V2A (1.4305) V2A (1.4305) V2A (1.4305) V2A (1.4305)material thickness (active surface) 0.6mm 0.6mm 0.6mm 0.6mmline length (max.) 300m 300m 300m 300moperating temperature -25 … +70°C -25 … +70°C -25 … +70°C -25 … +70°Cdegree of protection (EN 60529) IP68 IP67 IP68 IP67

connection 2m PUR cable, 3-wire M12-connector, 4-pin 2m PUR cable, 3-wire M12-connector, 4-pinconnection accessories - e.g. VK200325 - e.g. VK200325mounting accessories (clip) e.g. AY000051 e.g. AY000051 e.g. AY000051 e.g. AY000051mounting accessories AY000117 AY000117 AY000117 AY000117 (universal holder)* at 20 … 30V DC and +18 … +28C°



article-no. IC180206 IC180226 IO180206 IO180226 output pnp, nc pnp, nc pnp, nc pnp, nc

article-no. (on request) IC181126 (on request) (on request) output npn, no npn, no npn, no npn, no




operating voltage 10 … 30V DC 10 … 30V DC 10 … 30V DC 10 … 30V DCcurrent consumption (w/o load) ≤ 10mA ≤ 10mA ≤ 10mA ≤ 10mAoutput current (max. load) 200mA 200mA 200mA 200mAvoltage drop (max. load) 2.0V DC 2.0V DC 2.0V DC 2.0V DCnorm measuring plate 60x60x1mm, FE360 60x60x1mm, FE360 120x120x1mm, FE360 120x120x1mm, FE360hysteresis ≤ 15% ≤ 15% ≤ 15% ≤ 15%repeat accuracy * 1mm 1mm 2mm 2mmcorrection factors (St37/Alu/Ms) 1.0 / 1.0 / 1.3 1.0 / 1.0 / 1.3 1.0 / 1.0 / 1.2 1.0 / 1.0 / 1.2correction factors (stainl. steel/Cu) - / 0.9 - / 0.9 - / 0.9 - / 0.9correction factors (V2A: 1mm/2mm) 0.35 / 0.7 0.35 / 0.7 - / 0.25 - / 0.25switching frequency 100Hz 100Hz 100Hz 100Hz


dimensions M30x1.5 M30x1.5 M30x1.5 M30x1.5length (thread/complete) 50mm / 50mm 42mm / 63.5mm 40mm / 50mm 32mm / 63.5mmhousing material V2A (1.4305) V2A (1.4305) V2A (1.4305) V2A (1.4305)material thickness (active surface) 1mm 1mm 1mm 1mmline length (max.) 300m 300m 300m 300moperating temperature -25 … +70°C -25 … +70°C -25 … +70°C -25 … +70°Cdegree of protection (EN 60529) IP68 IP67 IP68 IP67

connection 2m PUR cable, 3-wire M12-connector, 4-pin 2m PUR cable, 3-wire M12-connector, 4-pinconnection accessories - e.g. VK200325 - e.g. VK200325mounting accessories (clip) e.g. AY000061 e.g. AY000061 e.g. AY000061 e.g. AY000061mounting accessories - - - -(universal holder)* at 20 … 30V DC and +18 … +28C°

switching distance 20mm 20mm 40mm 40mm version M30x1.5 M30x1.5 M30x1.5 M30x1.5mounting flush flush non-flush non-flushconnection cable connector cable connector


article-no. IC300206 IC300226 (on request) IO300226 output pnp, nc pnp, nc pnp, nc pnp, nc

article-no. (on request) IC301126 (on request) (on request) output npn, no npn, no npn, no npn, no


6


This data sheet contains the deliverable versions only. Kindly request the availability of other output- and connection functions.




connection

cable devices cable devices M8-connector

M12-connector M12-connector

For devices with M12-connector and normally closed contact function (nc), the switching output is wired via PIN2. For this reason a 4-wire cable socket should be used and the connection made via the white wire.wire colors: bn = brown (1), wh = white (2), bu = blue (3), bk = black (4)

mounting parameters

version flush mounting correction factors for non-flush mounting overhang (X) mounting into carrierM8

M12

M18

M30

carrier X

aluminum 9mmsteel 15mmbrass 10mmstainless steel 14mm

carrier X


carrier X


carrier X


carrier X

aluminum 0.9steel 1.0brass 0.9stainless steel 1.0

carrier X


carrier X


carrier X




P all-stainless steel housing

P high pressure resistance up to max. 100bar

P high switching distances on steel, brass and alu-minum

P outstanding impermeability



active surface made from metalIO-Link-capable devices

descriptionIO-Link is a globally standardized IO technology (IEC 61131-9) for communicating with sensors as well as actuators. The powerful point-to-point communication is based on the well-established three-conductor sensor and actuator connection. It allows addi-tional information, e.g., damping, sensor failure or switching frequency as well as the setting of sensor parameters such as switching performance, timer functions, etc., to be communica-ted without any additional requirements on the cable material.The series features particularly large switching distances. Thanks to special technology these high switching distances can be achieved not only on steel but also on other metals such as aluminum or brass. A further important characteristic of these sensors is their all-stainless steel housing. This means that the active surface of the devices is sealed against liquids and gases, to which the housing material is resistant. The devices offer a high pressure resistance thanks to the comparatively thick gauge material of the active surface. The pressure resistance of the devices refers to the active surface and the thread only. In addition they are much more resistant to mechanical loads than usual proximity switches.Attention should be paid to the size of the object (standard

target) and the surface condition (even surface) to guarantee the maximum switching distance.The LED status display lights up permanently if the distance between the sensor surface and the object is not more than 80% of the indicated switching distance. The object is reliably detected.In the case of larger distances, (80 to 100% of the indicated switching distance) the LED display flashes.correction factors indicate the change relating to the swit-ching distance if materials other than St37 (steel) are used. The change in the switching distance depends on the type, characteristics (internal structure), size and the geometry of the material that is to be detected. In order to assess the approximate switching distance on the materials which dif-fer from St37, the value for St37 has to be multiplied by the appropriate correction factor.

application examplesu operation in an extreme environment (oil, dirt, pressure)u use where a high demand is made in terms of reliability and

longevity

dimensions M8x1 M12x1 M18x1 M30x1.5 flush switching distance 2 … 10mm

INDUCTIVE SENSORSALL-STEEL SENSORS, IO-LINK 1650

6


TECHNICAL DATAswitching distance (Sn) 2mm 3mm 5mm 10mmIO-Link (IEC 61131-9) + + + +pressure resistance 100bar 80bar 60bar 40baroutput signal PNP, NO PNP, NO PNP, NO PNP, NO

operating voltage 10 … 30V DC 10 … 30V DC 10 … 30V DC 10 … 30V DCcurrent consumption (w/o load) ≤ 10mA ≤ 10mA ≤ 10mA ≤ 10mAoutput current (max. load) 200mA 200mA 200mA 200mAvoltage drop (max. load) 2.0V DC 2.0V DC 2.0V DC 2.0V DCnorm measuring plate 8x8x1mm, FE360 12x12x1mm, FE360 18x18x1mm, FE360 30x30x1mm, FE360hysteresis ≤ 20% ≤ 15% ≤ 15% ≤ 15%repeat accuracy * ≤ 0.1mm ≤ 0.2mm ≤ 0.3mm ≤ 0.3mmreadiness delay 30ms 25ms 25ms 50mscorrection factors (St37/Alu/Ms) 1.0 / 1.0 / 1.4 1.0 / 1.0 / 1.4 1.0 / 1.0 / 1.3 1.0 / 1.0 / 1.3correction factors (stainl. steel/Cu) - / 0.8 - / 0.9 - / 0.8 - / 0.8correction factors (V2A: 1mm/2mm) 0.2 / 0.4 0.2 / 0.6 0.3 / 0.7 0.4 / 0.6switching frequency 100Hz 100Hz 100Hz 50Hz


dimensions M8x1 M12x1 M18x1 M30x1.5length (thread/complete) 45.5mm / 60mm 41mm / 60mm 42mm / 63.5mm 42mm / 63.5mmhousing material V2A (1.4305) V2A (1.4305) V2A (1.4305) V2A (1.4305)material (active surface) V2A (1,4305) V2A (1,4305) V2A (1,4305) V2A (1,4305)material thickness (active surface) 0.25mm 0.4mm 0.6mm 1.0mmoperating temperature -25 … +70°C -25 … +70°C -25 … +70°C -25 … +70°Cdegree of protection (EN 60529) IP67 IP67 P67 IP67

connection M8-connector, 3-pin M12-connector, 3-pin M12-connector, 3-pin M12-connector, 3-pinconnection accessories e.g. VK200075 e.g. VK200025 e.g. VK200025 e.g. VK200025mounting accessories (clip) e.g. AY000047 e.g. AY000049 e.g. AY000051 e.g. AY000061mounting accessories (universal holder) AY000115 AY000115 AY000117 -

* at 20 … 30V DC and 18 … 28°C

article-no. IC080172 IC120122 IC180122 IC300122switching distance 2mm 3mm 5mm 10mmoutput PNP, NO PNP, NO PNP, NO PNP, NOconnection M8-connector M12-connector M12-connector M12-connector

INDUCTIVE SENSORS1650 ALL-STEEL SENSORS, IO-LINK


connection

connector devices

mounting parameters

flush mounting

M8

correction factors when mounting into carrier

M12

M18

M30

carrier factoraluminum 0.9steel 0.9brass 0.9stainless steel 0.9




1 = L+, 3 = L-, 4 = PNP NO

wire color: 1 = BN (brown), 3 = BU (blue), 4 = BK (black)

INDUCTIVE SENSORSALL-STEEL SENSORS, IO-LINK 1650

6



mounting accessories (universal holder) AY000115, AY000117


ACCESSORIESarticle-no. description noteAY000088 base module* jaw: stainless steel, ball pin: galvanized steelAY000115 mounting kit for M5, M8, M12 sensors stainless steelAY000117 mounting kit for M18 sensors stainless steel


The IODD files necessary for the IO-Link functionality can be downloaded from our homepage upon entry of the article number.




INDUCTIVE SENSORS1650 ALL-STEEL SENSORS, IO-LINK


P plastic housing

P LED display



P connection via cable and M12-connector

switching distance up to 140mmadjustable sensitivity

descriptionThe inductive proximity switches described here feature a robust plastic housing. Because these are injection molded parts, the devices are very tightly sealed near the active surfac-es. Moreover, compared to the typically used brass housings, they offer improved resistance to various chemicals. Devices with diameters from 80mm are equipped with a potentiom-eter for sensitivity adjustment. The size of the active surface ensures that very large switching distances can be achieved. To realize the specified distances, attention must be paid to the dimensions of the object. According to the standard, this is a square steel plate (ST37) with a thickness of 1 mm; the edge length must correspond to the diameter of the active surface of the used sensor. If the object is smaller or does not have a flat surface, the switching distance is reduced.Correction factors are listed in the data sheet for the detection of other metals.In order to assess the approximate switching distance to an object of the specified materials, the value of the nominal switching distance must be multiplied by the corresponding

correction factor.The DC versions of the large proximity switches (> Ø 80mm) are now equipped with an exclusive-OR switching output as well as an M12 plug connection.The application fields of these devices include areas where, e.g., sheet metal parts are to be detected with relatively large mechanical tolerances. The range of applications extends from machine/systems engineering, automotive industry, con-veyor technology and packaging industry, technology for the printing/paper industries, chemical engineering and process engineering (as well as many other industries).

application examplesu integration in machine parts in the automation technologyu checking the presence of metal parts with various dimen-

sionsu detecting object heights, e.g. metal parts on conveyor beltsu detection of objects through the walls of non-metallic con-

tainers and tubes

dimensions M12 x 1 M18 x 1 Ø 20mm M30 x 1.5 Ø 34mm Ø 80mm Ø 105mm Ø 160mm Ø 200mm non-flush switching distance 4 to 140mm


6


TECHNICAL DATAswitching distance (Sn) 4.0mm 4.0mm 4.0mm 8.0mmoutput signal pnp, no pnp, no AC, no pnp, nomounting non-flush non-flush non-flush non-flush

operating voltage 10 ... 30V DC 10 ... 30V DC 76 ... 250V AC 10 ... 60V DCcurrent consumption (w/o load) ≤ 11mA ≤ 11mA ≤ 2.5mA ≤ 8.0mAoutput current (max. load) 200mA 200mA 200mA 200mAvoltage drop (max. load) 1.5V DC 1.5V DC < 10.0V AC < 2.5V DCnorm measuring plate acc. to EN 60947-5-2 acc. to EN 60947-5-2 acc. to EN 60947-5-2 acc. to EN 60947-5-2hysteresis approx. 10% approx. 10% approx. 10% approx. 10%repeat accuracy ≤ 5% ≤ 5% ≤ 5% ≤ 5%correction factors (St37/Alu/Ms) 1/0.4/0.4 1/0.4/0.4 1/0.4/0.4 1/0.4/0.4correction factors (stainl. steel/Cu) 0.7/0.3 0.7/0.3 0.7/0.3 0.7/0.3switching frequency 400Hz 400Hz 25Hz 200Hz

display (signal) yellow LED yellow LED yellow LED yellow LEDshort-circuit protection + + - +reverse polarity protection + + + +

dimensions M12x1 M12x1 M12x1 M18x1length (thread/complete) 38mm/61mm 58mm/71mm 38mm/61mm 58mm/81.5mm housing material PA 6 PA 6 PA 6 PA 6operating temperature -25 ... +70°C -25 ... +70°C -25 ... +70°C -25 ... +70°C degree of protection (EN 60529) IP67 IP67 IP67 IP67

connection 2m PVC-cable, 3-wire M12-connector, 3-pin 2m PVC-cable, 2-wire 2m PVC-cable, 3-wireconnection accessories - e.g. VK200025 - - mounting accessories (clip) e.g. AY000049 e.g. AY000049 e.g. AY000049 e.g. AY000051accessories (universal holder) AY000115 AY000115 AY000115 AY000117

article-no. IN120107 IN120127 IN124107 IN180107switching distance 4.0mm 4.0mm 4.0mm 8.0mmoutput signal pnp,no pnp,no AC,no pnp,noconnection cable M12-connector cable cable



article-no. IN200107 IN200427 IN204107switching distance 10mm 10mm 10mmoutput signal pnp, no pnp, no/nc AC, noconnection cable M12-connector cable

TECHNICAL DATAswitching distance (Sn) 10mm 10mm 10mm output signal pnp, no pnp, no/nc AC, no mounting non-flush non-flush non-flush

operating voltage 10 ... 60V DC 10 ... 60V DC 20 ... 250V AC current consumption (w/o load) ≤ 8.0mA ≤ 8.0mA ≤ 2.0mA output current (max. load) 200mA 200mA 400mA voltage drop (max. load) < 2.5V DC < 2.5V DC 5.0V AC norm measuring plate acc. to EN 60947-5-2 acc. to EN 60947-5-2 acc. to EN 60947-5-2 hysteresis approx. 10% approx. 10% approx. 10% repeat accuracy ≤ 5% ≤ 5% ≤ 5% correction factors (St37/Alu/Ms) 1/0.4/0.4 1/0.4/0.4 1/0.4/0.4correction factors (stainl. steel/Cu) 0.7/0.3 0.7/0.3 0.7/0.3 switching frequency 200Hz 200Hz 10Hz

display (signal) yellow LED yellow LED yellow LED short-circuit protection + + -reverse polarity protection + + +

dimensions Ø 20mm Ø 20mm Ø 20mm length (thread/complete) -/79mm -/79mm -/79mm housing material PBT PBT PBT operating temperature -25 ... +70°C -25 ... +70°C -25 ... +70°C degree of protection (EN 60529) IP67 IP67 IP67

connection 2m PVC-cable, 3-wire M12-connector, 4-pin 2m PVC-cable, 2-wire connection accessories - e.g. VK000325 -mounting accessories (clip) incl. in scope of delivery incl. in scope of delivery incl. in scope of delivery accessories (universal holder) - - -


6


TECHNICAL DATAswitching distance (Sn) 15mm 15mmoutput signal pnp, no AC, nomounting non-flush non-flush

operating voltage 10 ... 60V DC 20 ... 250V AC current consumption (w/o load) ≤ 8.0mA ≤ 2.0mA output current (max. load) 200mA 400mA voltage drop (max. load) 2.5V DC < 5.0V ACnorm measuring plate acc. to EN 60947-5-2 acc. to EN 60947-5-2 hysteresis approx. 10% approx. 10% repeat accuracy ≤ 5% ≤ 5%correction factors (St37/Alu/Ms) 1/0.4/0.4 1/0.4/0.4 correction factors (stainl. steel/Cu) 0.7/0.3 0.7/0.3 switching frequency 100Hz 10Hz

display (signal) - - short-circuit protection + - reverse polarity protection + +

dimensions M 30x1.5 M 30x1.5length (thread/complete) 60mm/81mm 60mm/81mm housing material PA PAoperating temperature -25 ... +70°C -25 ... +70°C degree of protection (EN 60529) IP67 IP67

connection M12-connector, 3-pin 2m PVC-cable, 2-wireconnection accessories e.g. VK200025 - mounting accessories (clip) e.g. AY000061 e.g. AY000061accessories (universal holder) - -

article-no. IN300127 IN304107switching distance 15mm 15mmoutput signal pnp, no AC, noconnection M12-connector cable



article-no. IN340107 IN340127 IN344107switching distance 20.0mm 20.0mm 20.0mm output signal pnp, no pnp, no AC, no connection cable M12-connector cable

TECHNICAL DATAswitching distance (Sn) 20mm 20mm 20mm output signal pnp, no pnp, no AC, no mounting non-flush non-flush non-flush

operating voltage 10 ... 60V DC 10 ... 60V DC 20 ... 250V AC current consumption (w/o load) ≤ 8.0mA ≤ 8.0mA ≤ 2.0mA output current (max. load) 200mA 200mA 400mA voltage drop (max. load) 2.5V DC 2.5V DC 5.0V AC norm measuring plate acc. to EN 60947-5-2 acc. to EN 60947-5-2 acc. to EN 60947-5-2 hysteresis < 10% < 10% < 10% repeat accuracy ≤ 5% ≤ 5% ≤ 5% correction factors (St37/Alu/Ms) 1/0.4/0.4 1/0.4/0.4 1/0.4/0.4 correction factors (stainl. steel/Cu) 0.7/0.3 0.7/0.3 0.7/0.3 switching frequency 100Hz 100Hz 10Hz

display (signal) yellow LED - yellow LED short-circuit protection + + - reverse polarity protection + + +

dimensions Ø 34mm Ø 34mm Ø 34mm length (thread/complete) -/85mm -/82mm -/85mm housing material PBT PBT PBT operating temperature -25 ... +70°C -25 ... +70°C -25 ... +75°C degree of protection (EN 60529) IP67 IP67 IP67

connection 2m PVC-cable, 3-wire M12-connector, 3-pin 2m PVC-cable, 2-wire connection accessories - e.g. VK200025 - mounting accessories (clip) incl. in scope of delivery incl. in scope of delivery incl. in scope of delivery


6


TECHNICAL DATAswitching distance (Sn) 55mm 55mm 100mm 70mm output signal pnp, no/nc AC, no/nc pnp, no/nc AC, no/nc mounting non-flush non-flush non-flush non-flush

operating voltage 10 ... 55V DC 20 ... 250V AC 10 ... 55V DC 20 ... 250V AC current consumption (w/o load) ≤ 4.0mA ≤ 2.5mA ≤ 4.0mA ≤ 2.5mA output current (max. load) 400mA 400mA 400mA 400mA voltage drop (max. load) 2.0V DC 6.0V AC 2.0V DC 6.0V AC norm measuring plate acc. to EN 60947-5-2 acc. to EN 60947-5-2 acc. to EN 60947-5-2 acc. to EN 60947-5-2correction factors (St37/Alu/Ms) 1/0.4/0.4 1/0.4/0.4 1/0.4/0.4 1/0.4/0.4 correction factors (stainl. steel/Cu) 0.7/0.3 0.7/0.3 0.7/0.3 0.7/0.3 switching frequency 20Hz 10Hz 20Hz 10Hz

display (signal) yellow LED yellow LED yellow LED yellow LED short-circuit protection + - + - reverse polarity protection + + + +

dimensions Ø 80mm Ø 80mm Ø 105mm Ø 105mm length (thread/complete) -/40mm -/40mm -/40mm -/40mm housing material PBT PBT PBT PBT operating temperature -25 ... +75°C -25 ... +75°C -25 ... +75°C -25 ... +75°C degree of protection (EN 60529) IP67 IP67 IP67 IP67

connection M12-connector, 4-pin 2m PVC-cable, 2-wire M12-connector, 4-pin 2m PVC-cable, 2-wire connection accessories e.g. VK200325 - e.g. VK200325

article-no. IN800420 IN804300 INKA0420 INKA4300 switching distance 55mm 55mm 100mm 70mm output signal pnp, no / nc AC, no / nc pnp, no / nc AC, no / nc connection M12-connector cable M12-connector cable



TECHNICAL DATAswitching distance (Sn) 120mm 120mm output signal pnp, no/ nc AC, no/nc mounting non-flush non-flush

operating voltage 10 ... 55V DC 20 ... 250V AC current consumption (w/o load) ≤ 4.0mA ≤ 2.5mA output current (max. load) 400mA 400mA voltage drop (max. load) 2.0V DC 6.0V AC norm measuring plate acc. to EN 60947-5-2 acc. to EN 60947-5-2 correction factors (St37/Alu/Ms) 1/0.4/0.4 1/0.4/0.4 correction factors (stainl. steel/Cu) 0.7/0.3 0.7/0.3 switching frequency 20Hz 10Hz

display (signal) yellow LED yellow LED short-circuit protection + 3A/10ms reverse polarity protection + +

dimensions Ø 160mm Ø 160mm length (thread/complete) -/60mm -/60mm housing material PBT PBT operating temperature -25 ... +75°C -25 ... +75°C degree of protection (EN 60529) IP67 IP67

connection M12-connector, 4-pin 2m PVC-cable, 2-wire connection accessories e.g. VK200325 -

article-no. INKF0420 INKF4300 switching distance 120mm 120mm output signal pnpno/nc AC,no/nc connection M12-connector cable


6


TECHNICAL DATAswitching distance 140mm 140mm output signal pnp, no/nc AC, no/nc mounting non-flush non-flush

operating voltage 10 ... 55V DC 20 ... 250V AC current consumption (w/o load) ≤ 4.0mA ≤ 2.5mA output current (max. load) 400mA 400mA voltage drop (max. load) 2.0V DC 6.0V AC norm measuring plate acc. to EN 60947-5-2 acc. to EN 60947-5-2 correction factors (St37/Alu/Ms) 1/0.4/0.4 1/0.4/0.4 correction factors (stainl. steel/Cu) 0.7/0.3 0.7/0.3 switching frequency 20Hz 10Hz

display (signal) yellow LED yellow LED short-circuit protection + 3A/10ms reverse polarity protection + +

dimensions Ø 200mm Ø 200mm length (thread/complete) -/60mm -/60mm housing material PBT PBT operating temperature -25 ... +75°C -25 ... +75°C degree of protection (EN 60529) IP67 IP67

connection M12-connector, 4-pin 2m PVC-cable, 2-wire connection accessories e.g. VK200325 -

article-no. IN850420 IN854300 switching distance 140mm 140mm output signal pnp,no/nc AC,no/nc connection M12-connector cable



connection

DC cable connector device DC cable connector device


NO/NC switchover by removing the cable gland (AC devices) with designs IN80, IN85, INKA, INKF!

AC cable device AC cable device


6

switch



AY000088 base module * jaw: stainless steel, ball pin: galvanized steelAY000115 mounting kit for M5, M8, M12 sensors stainless steel AY000117 mounting kit for M18 sensors stainless steel


mounting accessories (universal holder) AY000115 and AY000117




ACCESSORIESarticle-no. description note image

AY000049 quick clip 12, plastic sensor 12round, mounting clip 1AY000050 quick clip 12, plastic sensor 12round, mounting clip, positive stop 1AY000051 quick clip 18, plastic sensor 18round, mounting clip 2AY000052 quick clip 18, plastic sensor 18round, mounting clip, positive stop 2AY000061 quick clip 30, plastic sensor 30round, mounting clip 3AY000062 quick clip 30, plastic sensor 30round, mounting clip, positive stop 3

AY000053 base, straight, plastic for quick clip 12 + 18round 4AY000054 base, angular, plastic for quick clip 12 + 18round 5AY000055 label, white for quick clip 12 + 18 + 30round without

This data sheet contains only the available standard versions. Please contact us for other output and connection versions.

We will be pleased to supply the matching cable socket for your connector devices. Please refer to the list in catalog chapter "accessories" under "cable sockets -SENSORFLEX®" or search our website for "VK".


mounting material / quick clips


fig. 4 fig. 5


6



NOTES


P chrome-plated brass housing


P large measuring ranges


analog measurement systems 0 to 10 V DC and 4 to 20mA

descriptionInductive analog sensors from ipf electronic are distinguished by a very large detection range, high precision, stability, repeat accuracy and low scattering.The product range includes sizes from M8 to M30 in semi-flush, build-in versions.Devices in the M8 design have a voltage output (0 … 10V). Starting with the M12 design, an additional current output (4 … 20mA) is available. All the main protective functions such as short-circuit and overload protection, reverse polarity pro-tection, induction and EMC-protection and power-on reset are built in.

To obtain the maximum measuring range, pay attention to the size of the object (standard target) and the surface finish (even surface). To ensure reliable device operation, you must comply with the installation conditions on this data sheet.

application examplesu punch check on metal parts with different dimensionsu distance and position measurementu position recognition of rotating machine parts using eccen-

trics

dimensions M8x1 M12x1 M18x1 M30x1.5

semi-flush measuring range up to 20mm

INDUCTIVE SENSORSANALOG SENSORS 1800

6


TECHNICAL DATAmeasuring range 0 … 4mm 0 … 4mm 0 … 6mm 0 … 6mmoutput signal 0 … 10V DC 0 … 10V DC 0 … 10V DC 0 … 10V DC - - 4 … 20mA 4 … 20mAresolution ≤ 1µm ≤ 1µm ≤ 1µm ≤ 1µm

operating voltage 15 … 30V DC 15 … 30V DC 15 … 30V DC 15 … 30V DCcurrent consumption (w/o load) ≤ 10mA ≤ 10mA ≤ 12mA ≤ 12mAload resistance voltage: > 100kΩ voltage: > 100kΩ voltage: > 100kΩ voltage: > 100kΩ - - current: > 1kΩ current: < 1kΩnorm measuring plate 12x12x1mm 12x12x1mm 18x18x1mm 18x18x1mmrepeat accuracy 0.3mm 0.3mm 0.3mm 0.3mmreadiness delay ≤ 50ms ≤ 50ms ≤ 50ms ≤ 50mscorrection factors (St37/Alu/Ms) 1.0 / 0.28 / 0.4 1.0 / 0.28 / 0.4 1.0 / 0.28 / 0.35 1.0 / 0.28 / 0.35correction factors (stainl. steel/Cu) 0.68 / 0.25 0.68 / 0.25 0.47 / 0.2 0.47 / 0.2

display - - - -short-circuit protection + + + +reverse polarity protection + + + +

dimensions M8x1 M8x1 M12x1 M12x1housing material chrome-plated brass chrome-plated brass chrome-plated brass chrome-plated brassmaterial (front cap) PBTP PBTP PBTP PBTP length (thread/complete) 45mm/45mm 45mm/60mm 50mm/50mm 44mm/60mmoperating temperature -25 … +70°C -25 … +70°C -25 … +70°C -25 … +70°Cdegree of protection (EN 60529) IP67 IP67 IP67 IP67

connection 2m PUR cable, 3-wire M8-connector, 3-pin 2m PUR cable, 4-wire M12-connector, 4-pinconnection accessories - e.g. VK205071 - e.g. VK205321 mounting accessories (clip) AY000047 AY000047 AY000049 AY000049mounting accessories AY000115 AY000115 AY000115 AY000115 (universal holder)

article-no. IB080006 IB080076 IB120006 IB120026operating range 0 … 4mm 0 … 4mm 0 … 6mm 0 … 6mmoutput 0 … 10V DC / - 0 … 10V DC / - 0 … 10V DC / 4 … 20mA 0 … 10V DC / 4 … 20mA

INDUCTIVE SENSORS1800 ANALOG SENSORS


TECHNICAL DATAmeasuring range 0 … 10mm 0 … 10mm 0 … 20mm 0 … 20mmoutput signal 0 … 10V DC 0 … 10V DC 0 … 10V DC 0 … 10V DC 4 … 20mA 4 … 20mA 4 … 20mA 4 … 20mAresolution ≤ 2µm ≤ 2µm ≤ 5µm ≤ 5µm

operating voltage 15 … 30V DC 15 … 30V DC 15 … 30V DC 15 … 30V DCcurrent consumption (w/o load) ≤ 12mA ≤ 12mA ≤ 12mA ≤ 12mAload resistance voltage: > 100kΩ voltage: > 100kΩ voltage: > 100kΩ voltage: > 100kΩ current: > 1kΩ current: > 1kΩ current: > 1kΩ current: < 1kΩnorm measuring plate 30x30x1mm 30x30x1mm 60x60x1mm 60x60x1mmrepeat accuracy 0.3mm 0.3mm 0.3mm 0.3mmreadiness delay ≤ 50ms ≤ 50ms ≤ 50ms ≤ 50mscorrection factors (St37/Alu/Ms) 1.0 / 0.18 / 0.28 1.0 / 0.18 / 0.28 1.0 / 0.2 / 0.3 1.0 / 0.2 / 0.3correction factors (stainl. steel/Cu) 0.6 / 0.15 0.6 / 0.15 0.65 / 0.17 0.65 / 0.17

display - - - -short-circuit protection + + + +reverse polarity protection + + + +

dimensions M18x1 M18x1 M30x1.5 M30x1.5housing material chrome-plated brass chrome-plated brass chrome-plated brass chrome-plated brassmaterial (front cap) PBTP PBTP PBTP PBTP length (thread/complete) 50mm/50mm 42mm/63.5mm 60mm/60mm 52mm/73.5mmoperating temperature -25 … +70°C -25 … +70°C -25 … +70°C -25 … +70°Cdegree of protection (EN 60529) IP67 IP67 IP67 IP67

connection 2m PUR cable, 4-wire M12-connector, 4-pin 2m PUR cable, 4-wire M12-connector,4-pinconnection accessories - e.g. VK205321 - e.g. VK205321mounting accessories (clip) AY000051 AY000051 AY000061 AY000061mounting accessories ( AY000117 AY000117 - -universal holder)

article-no. IB180006 IB180026 IB300006 IB300026operating range 0 … 10mm 0 … 10mm 0 … 20mm 0 … 20mmoutput 0 … 10V DC / 4 … 20mA 0 … 10V DC / 4 … 20mA 0 … 10V DC / 4 … 20mA 0 … 10V DC / 4 … 20mA

INDUCTIVE SENSORSANALOG SENSORS 1800

6


mounting parameters

IB080006 IB120006 IB180006 IB300006 IB080076 IB120026 IB180026 IB300026installation dimension A 8mm 12mm 19mm 35mminstallation dimension B 20mm 30mm 44mm 80mminstallation dimension C* 1mm 2mm 4mm 6mminstallation dimension D 12mm 18mm 30mm 60mm

* when mounting into backing material „metal“


connection

IB08 IB12, IB18, IB30





IB080006 and IB080076 only analog output 0 to 10V DC

response curves

IB08 IB12

IB18 IB30

INDUCTIVE SENSORS1800 ANALOG SENSORS


P resistant to spray water or permanent submersion

P resistant to acids and bases

P insensitive to rapid temperature changes from -25°C to +110°C

P housing: V4A, front cap: teflon

P LED display with M18 and M30

P versions with DC or AC voltage

P switching frequency up to 1000kHz

dimensions M12x1 M18x1 M30x1.5 flush switching distance 2 to 10mmnon-flush switching distance 4 to 15mm

unaffected by atmospheric changesdegree of protection IP68 and IP69k

descriptionThe atmospheric-change-resistant inductive proximity swit-ches from ipf electronic are intended for use in corrosive environments with constantly changing temperature and high humidity. Thus, permanent use in washing facilities is permissible. A high resistance to corrosion while still providing mechanical stability under load is achieved through the combination of PTFE and titanium-stabilized stainless steel. The built-in LED shines through the cable-side cover.A Viton O-ring in the front cap as well as the compound around

the connection cable within the housing ensure outstanding impermeability.

application examplesuuse in washing facilitiesuuse in climatic chambersufoodstuffs and pharmaceutical industriesuuse in aggressive environmental conditionsuroll stands in cold rolling mills

INDUCTIVE SENSORSUNAFFECTED BY ATMOSPHERIC CHANGES 2000

6


TECHNICAL DATAswitching distance (Sn) 2mm 4mmmounting flush non-flush output signal pnp, no pnp, no

operating voltage 10 … 30V DC 10 … 30V DC current consumption (w/o load) ≤ 4mA ≤ 4mA output current (max. load) 200mA 200mA voltage drop (max. load) 2.0V DC 2.0V DC norm measuring plate acc. to EN 60947-5-2 acc. to EN 60947-5-2 hysteresis < 10% < 10% repeat accuracy < 3% < 3% switching frequency 1kHz 1kHzpressure resistance (max.) 10bar 10bar

display (signal) - - short-circuit protection + + reverse polarity protection + +

dimensions M12x1mm M12x1mmlength (thread/complete) 35mm/63mm 35mm/67mmhousing material stainless steel 1.4571 stainless steel 1.4571 material (front cap) PTFE PTFEoperating temperature -25 … +110°C -25 … +110°C degree of protection (EN 60529) IP68/IP69K IP68/IP69K

connection 2m FEP-cable 3-wire 2m FEP-cable 3-wire mounting accessories (clip) AY000099 AY000099

article-no. IB1201K0 IN1201K0switching distance (Sn) 2mm 4mm mounting flush non-flush output pnp, no pnp, no

INDUCTIVE SENSORS2000 UNAFFECED BY ATMOSPHERIC CHANGES


TECHNICAL DATAswitching distance (Sn) 5mm 7mm 5mm 7mmmounting flush non-flush flush non-flushoutput signal pnp, no / nc pnp, no / nc AC, no AC, no

operating voltage 10 … 30V DC 10 … 30V DC 20 … 250V AC 20 … 250V ACcurrent consumption (w/o load) ≤ 4mA ≤ 4mA ≤ 2.5mA ≤ 2.5mAminimum load current - - < 5mA < 5mAoutput current (max. load) 200mA 200mA 400mA 400mAvoltage drop (max. load) 2.0V DC 2.0V DC 5.0V AC 5.0V ACnorm measuring plate acc. to EN 60947-5-2 acc. to EN 60947-5-2 acc. to EN 60947-5-2 acc. to EN 60947-5-2hysteresis < 10% < 10% < 10% < 10%repeat accuracy < 3% < 3% < 3% < 3% switching frequency 1kHz 1kHz 25Hz 25Hzpressure resistance (max.) 10bar 10bar 10bar 10bar

display (signal) yellow LED yellow LED yellow LED yellow LEDshort-circuit protection + + - -reverse polarity protection + + + +

dimensions M18x1mm M18x1mm M18x1mm M18x1mmlength (thread/complete) 60mm/95mm 60mm/103mm 60mm/95mm 60mm/103mmhousing material stainless steel 1.4571 stainless steel 1.4571 stainless steel 1.4571 stainless steel 1.4571material (front cap) PTFE PTFE PTFE PTFEoperating temperature -25 … +110°C -25 … +110°C -25 … +110°C -25 … +110°Cdegree of protection (EN 60529) IP68/IP69K IP68/IP69K IP68/IP69K IP68/IP69K

connection 2m FEP cable 4-wire 2m FEP cable 4-wire 2m FEP cable 3-wire 2m FEP cable 3-wiremounting accessories (clip) AY000100 AY000100 AY000100 AY000100

article-no. IB1804K0 IN1804K0 IB1841K0 IN1841K0switching distance (Sn) 5mm 7mm 5mm 7mmmounting flush non-flush flush non-flushoutput pnp, no / nc pnp, no / nc AC, no AC, no


6


TECHNICAL DATAswitching distance (Sn) 10mm 15mm 10mm 15mmmounting flush non-flush flush non-flushoutput signal pnp, no / nc pnp, no / nc AC, no AC, no

operating voltage 10 … 30V DC 10 … 30V DC 20 … 250V AC 20 … 250V ACcurrent consumption (w/o load) ≤ 4mA ≤ 4mA ≤ 2.5mA ≤ 2.5mAminimum load current - - < 5mA < 5mAoutput current (max. load) 200mA 200mA 400mA 400mAvoltage drop (max. load) 2.0V DC 2.0V DC 5.0V AC 5.0V ACnorm measuring plate acc. to EN 60947-5-2 acc. to EN 60947-5-2 acc. to EN 60947-5-2 acc. to EN 60947-5-2hysteresis < 10% < 10% < 10% < 10%repeat accuracy < 3% < 3% < 3% < 3% switching frequency 1kHz 1kHz 25Hz 25Hzpressure resistance (max.) 10bar 10bar 10bar 10bar

display (signal) yellow LED yellow LED yellow LED yellow LEDshort-circuit protection + + - -reverse polarity protection + + + +

dimensions M30x1.5mm M30x1.5mm M30x1.5mm M30x1.5mmlength (thread/complete) 65mm/100mm 65mm/110mm 65mm/100mm 65mm/110mmhousing material stainless steel 1.4571 stainless steel 1.4571 stainless steel 1.4571 stainless steel 1.4571material (front cap) PTFE PTFE PTFE PTFEoperating temperature -25 … +110°C -25 … +110°C -25 … +110°C -25 … +110°Cdegree of protection (EN 60529) IP69K IP69K IP69K IP69K

connection 2m FEP cable 4-wire 2m FEP cable 4-wire 2m FEP cable 3-wire 2m FEP cable 3-wiremounting accessories AY000101 AY000101 AY000101 AY000101

article-no. IB3004K0 IN3004K0 IB3041K0 IN3041K0switching distance (Sn) 10mm 15mm 10mm 15mmmounting flush non-flush flush non-flushoutput pnp, no / nc pnp, no / nc AC, no AC, no



connection

cable device DC M12 cable device DC M18, M30

cable device AC M18, M30


output current as a function of temperature

Ix1201K0 Ix1804K0, Ix3004K0

Ix1841K0, Ix3004K0


6



AY000099 mounting clip Ø 12mm stainl. steelAY000100 mounting clip Ø 18mm stainl. steelAY000101 mounting clip Ø 30mm stainl. steel




mounting accessories (clip)

AY000099 for M12x1, stainl. steel AY000100 for M18x1, stainl. steel

AY000101 for M30x1.5, stainl. steel



P operating temperature up to +100°C

P housing made of stainless steel

P stainless steel sensor surface


P connection with M12-connector

high-pressure-proof up to 500bartemperature resistant up to +90°C/+100°C

descriptionThese devices are perfectly suited for applications with high dynamic pressure loads.The main problem with pressure-proof inductive proximity switches is the thick coverage of the active surface (generally from a ceramic material) required to obtain the pressure resistance.The new pressure-proof ipf sensors consist of a one-piece, all stainless steel housing. Thus, proven technology is at work.The devices have a switching distance of 2mm and are tempe-rature resistant up to +100°C.

The active surfaces are identical in construction to those of conventional pressure-proof proximity switches and, through appropriate fit and sealing with an O-ring, are very well sealed.As a result, the devices can replace existing systems without problem.

application examplesu position recognition of hydraulic cylinder pistons

dimensions M12x1

flush switching distance 2.0mm

INDUCTIVE SENSORSPRESSURE-PROOF SENSORS 2150

6


article-no. IP129120 IP129121 IP129122 switching distance 2.0mm 2.0mm 2.0mm

TECHNICAL DATAswitching distance (Sn) 2.0mm 2.0mm 2.0mm mounting flush flush flush pressure resistance (operation) 500bar 500bar 500bar output signal pnp, no pnp, no pnp, no

operating voltage 10 … 30V DC 10 … 30V DC 10 … 30V DC current consumption (w/o load) ≤ 10mA ≤ 10mA ≤ 10mA output current (max. load) 200mA 200mA 200mA voltage drop (max. load) 2.4V DC 2.4V DC 2.4V DC hysteresis < 15% < 15% < 15% repeat accuracy < 5% < 5% < 5% readiness delay ≤ 100ms ≤ 100ms ≤ 100ms switching frequency 400Hz 400Hz 400Hz

display (signal) - - - short-circuit protection + + + reverse polarity protection + + +

dimensions M12x1 M12x1 M12x1 length (thread/complete) 36mm/70mm 40mm/79mm 42mm/78mm housing material stainless steel stainless steel stainless steel material (front cap) stainless steel stainless steel stainless steel operating temperature -25 … +100°C -25 … +100°C -25 … +100°C degree of protection (EN 60529) IP67/IP69k IP67/IP69k IP67/IP69k

connection M12-connector, 3-pin M12-connector, 3-pin M12-connector, 3-pin connection accessories e.g. VK200025 e.g. VK200025 e.g. VK200025

INDUCTIVE SENSORS2150 PRESSURE-PROOF SENSORS


article-no. IP129123 IP129124 IP129125 switching distance 2.0mm 2.0mm 2.0mm

TECHNICAL DATAswitching distance (Sn) 2.0mm 2.0mm 2.0mm mounting flush flush flush pressure resistance (operation) 500bar 500bar 500bar output signal pnp, no pnp, no pnp, no

operating voltage 10 … 30V DC 10 … 30V DC 10 … 30V DC current consumption (w/o load) ≤ 10mA ≤ 10mA ≤ 10mA output current (max. load) 200mA 200mA 200mA voltage drop (max. load) 2.4V DC 2.4V DC 2.4V DC hysteresis < 15% < 15% < 15% repeat accuracy < 5% < 5% < 5% readiness delay ≤ 100ms ≤ 100ms ≤ 100ms switching frequency 400Hz 400Hz 400Hz


dimensions M12x1 M12x1 M12x1 length (thread/complete) 94mm/127mm 42mm/57mm 38mm/56mm housing material stainless steel stainless steel stainless steel material (front cap) stainless steel stainless steel stainless steel operating temperature -25 … +100°C -25 … +90°C -25 … +90°C degree of protection (EN 60529) IP67/IP69k IP67/IP69k IP67/IP69k

connection M12-connector, 3-pin M12-connector, 3-pin M12-connector, 3-pin connection accessories e.g. VK200025 e.g. VK200025 e.g. VK200025

INDUCTIVE SENSORSPRESSURE-PROOF SENSORS 2150

6



connection

connector device



We are happy to supply the right cable socket for the plug equipment. You will find a list in the “accessories” section of the catalog under -SENSORFLEX®” “cable sockets” or in the search window on our homepage www.ipf-electronic.com (using the search term “VK”).


INDUCTIVE SENSORS2150 PRESSURE-PROOF SENSORS


P high resolution

P insensitive to soiling

P adjustable pulse stretching

P adjustable sensitivity

P high object speed possible

P short response time

dimensions 35 x 20 x 60mm to 145 x 45 x 190mm

static / dynamic ring Ø 6.1mm 10.1mm 15.1mm 20.1mm 25.1mm 35.2mm 51.0mm 101.0mm

wire break (static) ring Ø 4.0mm 6.0mm

functions “static” and “dynamic” as well as “wire break sensors”

descriptionIn the case of inductive ring sensors, the active detection range is located within a ring-shaped opening. When passing this ring, all metal objects trigger a defined output signal. Pulse stretching is integrated so that it can be reliably used for cont-rol, registration, checking and other processing tasks.ipf ring sensors are especially suited for use in machine and system engineering and are increasingly used in the fields of installation technology and feed automation.Static ring sensors offer optimum functions for all conceivable applications, e.g. detection and jam control of small metal parts in feed hoses.Dynamic ring sensors guarantee the reliable detection of parts which are quickly moved at a minimum speed of 15cm/sec.They have a resolution which is still higher and guarantees the detection of the smallest of parts / parts which have a low mass (e.g. springs). The high resolution also remains preserved for a long time when environmental conditions are changed, e.g.

soiling which contains metal.ipf wire fracture sensors are especially adjusted for fracture control of thin wires. They are characterized by their very short response time. Versions which have interior diameters of the ring measuring 4mm and 6mm are fitted with a ceramic element for improving resistance.

application examplesuin processing situations, reliable detection of metallic for-

eign bodies in bulk material or foodstuffsuin manufacturing processes, controlling the ejection of

small parts partially containing metaluthe reliable selection of different part sizes in transportation

or assembly linesureliable controlling of wire breakage where wires are wound

and pulleducontrolling the supply of metal parts

INDUCTIVE SENSORSRING SENSORS 2200

6


article-no. IY060320 IY100320 IY150320inner ring diameter 6.1mm 10.1mm 15.1mmversion static static staticresolution (steel ball) 1.0mm 1.5mm 2.0mm

article-no. IY060325 IY100325 IY150325inner ring diameter 6.1mm 10.1mm 15.1mmversion dynamic dynamic dynamicresolution (steel ball) 0.5mm 0.6mm 0.8mm

TECHNICAL DATAinner ring diameter 6.1mm 10.1mm 15.1mmoutput signal pnp, no/nc pnp, no/nc pnp, no/nc

operating voltage 10 … 35V DC 10 … 35V DC 10 … 35V DCcurrent consumption (w/o load) < 10mA < 10mA < 10mAoutput current (max. load) 200mA 200mA 200mAvoltage drop (max. load) 2.0V DC 2.0V DC 2.0V DCshort response and decay time static: 0.5ms/10ms static: 0.5ms/10ms static: 0.5ms/10ms dynamic: 0.2ms/10ms dynamic: 0.2ms/10ms dynamic: 0.2ms/10ms

display (signal) yellow LED yellow LED yellow LEDparts speed (max.) 35m/s 35m/s 35m/ssensitivity adjustment potentiometer potentiometer potentiometersetting change-over switch no/nc change-over switch no/nc change-over switch no/ncpulse stretching static: 10 … 150ms static: 10 … 150ms static: 10 … 150ms dynamic: 10 … 150ms dynamic: 10 … 150ms dynamic: 10 … 150msshort-circuit protection + + +reverse polarity protection + + +

dimensions 35x20x60mm 35x20x60mm 35x20x60mmhousing material polyamide polyamide polyamidering material POM POM POMoperating temperature -25 … +70°C -25 … +70°C -25 … +70°Cdegree of protection (EN 60529) IP67 IP67 IP67

connection M12-connector, 3-pin M12-connector, 3-pin M12-connector, 3-pinconnection accessories e.g. VK200025 e.g. VK200025 e.g. VK200025

INDUCTIVE SENSORS2200 RING SENSORS


article-no. IY200320 IY250320 IY350320version static static staticinner ring diameter 20.1mm 25.1mm 35.2mmresolution (steel ball) 2.5mm 3.0mm 4.5mm

article-no. IY200325 IY250325 IY350325version dynamic dynamic dynamicinner ring diameter 20.1mm 25.1mm 35.2mmresolution (steel ball) 1.0mm 1.2mm 2.0mm

TECHNICAL DATA inner ring diameter 20.1mm 25.1mm 35.2mmoutput signal pnp, no/nc pnp, no/nc pnp, no/nc

operating voltage 10 … 35V DC 10 … 35V DC 10 … 35V DCcurrent consumption (w/o load) < 10mA < 10mA < 10mAoutput current (max. load) 200mA 200mA 200mAvoltage drop (max. load) 2.0V DC 2.0V DC 2.0V DCshort response and decay time static: 0.5ms/10ms static: 0.5ms/10ms static: 0.5ms/10ms dynamic: 0.2ms/10ms dynamic: 0.2ms/10ms dynamic: 0.2ms/10ms

display (signal) yellow LED yellow LED yellow LEDparts speed (max.) 35m/s 35m/s 35m/ssensitivity adjustment potentiometer potentiometer potentiometersetting change-over switch no/nc change-over switch no/nc change-over switch no/ncpulse stretching static: 10 … 150ms static: 10 … 150ms static: 10 … 150ms dynamic: 10 … 150ms dynamic: 10 … 150ms dynamic: 0.1 … 150msshort-circuit protection + + +reverse polarity protection + + +

dimensions 35x20x60mm 35x20x60mm 60x20x85mmhousing material polyamide polyamide polyamidering material POM POM POMoperating temperature -25 … +70°C -25 … +70°C -25 … +70°Cdegree of protection (EN 60529) IP67 IP67 IP67

connection M12-connector, 3-pin M12-connector, 3-pin M12-connector, 3-pinconnection accessories e.g. VK200025 e.g. VK200025 e.g. VK200025


6


article-no. IY500320 IYK00320inner ring diameter 51.0mm 101.0mmversion static staticresolution 6.0mm 10.0mm

article-no. IY500325 IYK00325inner ring diameter 51.0mm 101.0mmversion dynamic dynamicresolution 2.5mm 5.0mm

TECHNICAL DATA inner ring diameter 51.0mm 101.0mmoutput signal pnp, no/nc pnp, no/nc

operating voltage 10 … 35V DC 10 … 35V DCcurrent consumption (w/o load) < 10mA < 15mAoutput current (max. load) 200mA 200mAvoltage drop (max. load) 2.0V DC 2.0V DCshort response and decay time static: 1.0ms/10ms static: 1.0ms/10ms dynamic: 0.2ms/0.2ms dynamic: 0.2ms/0.2ms

display (signal) yellow LED yellow LEDparts speed (max.) 35m/s 25m/ssensitivity adjustment potentiometer potentiometersetting change-over switch no/nc change-over switch no/ncpulse stretching static: 10 … 150ms static: 10 … 150ms dynamic: 0.1 … 150ms dynamic: 0.1… 150msshort-circuit protection + +reverse polarity protection + +

dimensions 80x20x110mm 140x45x190mmhousing material polyamide polyamidering material POM POMoperating temperature -25 … +70°C -25 … +70°Cdegree of protection (EN 60529) IP67 IP67

connection M12-connector, 3-pin M12-connector, 3-pinconnection accessories e.g. VK200025 e.g. VK200025



article-no. IY040322 IY060322version wire break (static) wire break (static)resolution copper wire: 0.2mm copper wire: 0.2mm

TECHNICAL DATA inner ring diameter 4.0mm 6.0mmoutput signal pnp, no/nc pnp, no/nc

operating voltage 10 … 35V DC 10 … 35V DCcurrent consumption (w/o load) < 10mA < 10mAoutput current (max. load) 200mA 200mAvoltage drop (max. load) 2.0V DC 2.0V DCresponse/decay time 0.5ms / 10ms 0.5ms / 10ms

display (signal) yellow LED yellow LEDparts speed (max.) 35m/s 35m/ssensitivity adjustment potentiometer potentiometersetting change-over switch no/nc change-over switch no/ncpulse stretching 10 … 150ms 10 … 150msshort-circuit protection + +reverse polarity protection + +

dimensions 35x40x60mm 35x40x60mmhousing material polyamide polyamidematerial (ring) POM with ceramic insert POMoperating temperature -25 … +70°C -25 … +70°Cdegree of protection (EN 60529) IP67 IP67



6


IY060320 0mm 0mm 11mm 0mmIY100320 0mm 0mm 15mm 0mmIY150320 5mm 0mm 20mm 0mmIY200320 10mm 50mm 25mm 2mmIY250320 10mm 50mm 32mm 2mmIY350320 10mm 50mm 50mm 7mmIY500320 60mm 180mm 70mm 40mmIYK00320 10mm 60mm 130mm 80mm

IY060325 5mm 20mm 11mm 0mmIY100325 20mm 60mm 15mm 0mmIY150325 60mm 120mm 20mm 2mmIY200325 70mm 130mm 25mm 4mmIY250325 150mm 200mm 32mm 8mmIY350325 40mm 100mm 50mm 0mmIY500325 230mm 250mm 70mm 0mmIYK00325 10mm 30mm 130mm 0mm

IY040322 0mm 0mm - 5mmIY060322 0mm 0mm - 5mm

connection

connector devices


MOUNTING PARAMETERSarticle-no. distance X distance Y bore D distance Z adjacent to one another above one another flush with metal plate bore D1 = Ø ring









P LED display

P connection with M8- and M12-connector

dimensions Ø 6.5mm M8x1 M12x1 M18x1 M30x1.5

flush switching distance 1.5 to 10mmnon-flush switching distance 3.0 to 15mm

temperature range from -40 to +100°C

descriptionInductive sensors with enlarged temperature range are avai-lable in Ø 6.5, M8, M12, M18 and M30 designs. The maximum ambient temperature must not exceed +100°C.The electronics of these sensors are housed in a sturdy metal housing. As a consequence of the compound, the electronics are perfectly protected from vibrations.The devices are provided with an M8 or M12 plug connection. The connection is made via cable sockets, which are also sui-table for elevated temperatures.The sensors work through the contactless detection of objects, without wear and tear. Detection of the objects is signaled by a yellow LED.

To obtain the maximum switching distance, pay attention to the size of the object (standard target) and its surface finish (even surface).

application examplesuintegration in machine parts subject to rough

industrial environmentsurobotics applicationsudetection of hot workpieces in the steel industry,

in foundries and glass manufactureupositioning hot parts in handling and conveying systems

INDUCTIVE SENSORSENLARGED TEMPERATURE RANGE 2250

6


TECHNICAL DATAswitching distance (Sn) 1.5mm 3.0mm 1.5mm 3.0mm mounting flush non-flush flush non-flush output signal pnp, no pnp, no pnp, no pnp, no

operating voltage 10 … 30V DC 10 … 30V DC 10 … 30V DC 10 … 30V DC current consumption (w/o load) ≤ 13mA ≤ 13mA ≤ 13mA ≤ 13mA output current (max. load) 200mA 200mA 200mA 200mA voltage drop (max. load) 2.4V DC 2.4V DC 2.4V DC 2.4V DC hysteresis < 15% < 15% < 15% < 15% repeat accuracy < 10% < 10% < 10% < 10% readiness delay ≤ 300ms ≤ 300ms ≤ 300ms ≤ 300ms switching frequency 2kHz 1kHz 2kHz 1kHz

display (signal) + + + + short-circuit protection + + + + reverse polarity protection + + + +

dimensions Ø 6.5mm Ø 6.5mm M8x1 M8x1length (thread/complete) -/50mm -/50mm 36mm/50mm 30mm/57mm housing material nickel-plated brass nickel-plated brass nickel-plated brass nickel-plated brassmaterial (front cap) Pocan Pocan Pocan Pocan operating temperature -40 … +100°C -40 … +100°C -40 … +100°C -40 … +100°C degree of protection (EN 60529) IP67 IP67 IP67 IP67

connection M8-connector M8-connector M8-connector M8-connector connection accessories e.g. VK20H075 e.g. VK20H075 e.g. VK20H075 e.g. VK20H075mounting accessories (universal holder) - - e.g. AY000115 e.g. AY000115mounting accessories (bracket) - - e.g. AY000098 e.g. AY000098mounting accessories (clip) e.g. AY000019 e.g. AY000019 - -

article-no. IA06017W IM06017W IA08017W IM08017W switching distance 1.5mm 3.0mm 1.5mm 3.0mmmounting flush non-flush flush non-flush

INDUCTIVE SENSORS2250 ENLARGED TEMPERATURE RANGE


TECHNICAL DATAswitching distance (Sn) 2.0mm 4.0mm 5.0mm 8.0mm mounting flush non-flush flush non-flush output signal pnp, no pnp, no pnp, no pnp, no

operating voltage 10 … 30V DC 10 … 30V DC 10 … 30V DC 10 … 30V DC current consumption (w/o load) ≤ 13mA ≤ 13mA ≤ 13mA ≤ 13mA output current (max. load) 200mA 200mA 200mA 200mA voltage drop (max. load) 2.4V DC 2.4V DC 2.4V DC 2.4V DC hysteresis < 15% < 15% < 15% < 15% repeat accuracy < 10% < 10% < 5% < 5% readiness delay ≤ 300ms ≤ 300ms ≤ 300ms ≤ 300ms switching frequency 2kHz 1kHz 1kHz 500Hz

display (signal) + + + + short-circuit protection + + + + reverse polarity protection + + + +

dimensions M12x1 M12x1 M18x1 M18x1 length (thread/complete) 40mm/60mm 34mm/60mm 40mm/65mm 30mm/65mm housing material nickel-plated brass nickel-plated brass nickel-plated brass nickel-plated brassmaterial (front cap) PCB PCB PCB PCB operating temperature -40 … +100°C -40 … +100°C -40 … +100°C -40 … +100°C degree of protection (EN 60529) IP67 IP67 IP67 IP67

connection M12-connector M12-connector M12-connector M12-connector connection accessories e.g. VK20H026 e.g. VK20H026 e.g. VK20H026 e.g. VK20H026mounting accessories (universal holder) e.g. AY000115 e.g. AY000115 e.g. AY000117 e.g. AY000117mounting accessories (bracket) e.g. AY000099 e.g. AY000099 e.g. AY000100 e.g. AY000100

article-no. IA12012W IM12012W IA18012W IM18012Wswitching distance 2.0mm 4.0mm 5.0mm 8.0mmmounting flush non-flush flush non-flush


6


TECHNICAL DATAswitching distance (Sn) 10.0mm 15.0mm mounting flush non-flush output signal pnp, no pnp, no

operating voltage 10 … 30V DC 10 … 30V DC current consumption (w/o load) ≤ 13mA ≤ 13mA output current (max. load) 200mA 200mA voltage drop (max. load) 2.4V DC 2.4V DC hysteresis < 15% < 15% repeat accuracy < 10% < 10% readiness delay ≤ 300ms ≤ 300ms switching frequency 500Hz 300Hz

display (signal) + + short-circuit protection + + reverse polarity protection + +

dimensions M30x1.5 M30x1.5 length (thread/complete) 50mm/75mm 34mm/74mm housing material nickel-plated brass nickel-plated brass material (front cap) PCB PCB operating temperature -40 … +100°C -40 … +100°C degree of protection (EN 60529) IP67 IP67

connection M12-connector M12-connector connection accessories e.g. VK20H026 e.g. VK20H026mounting accessories (bracket) e.g. AY000101 e.g. AY000101

article-no. IA30012W IM30012W switching distance 10.0mm 15.0mmmounting flush non-flush






connection


universal mounting AY000115, AY000117



6



AY000099 for design M12x1, stainl. steel AY000100 for design M18x1, stainl. steel

AY000101 for design M30x1.5, stainl. steel AY000104 for design M30x1.5

accessories - brackets

AY000019 for design Ø 6.5 AY000098 for design M8x1, stainl. steel






flush

, non

-flus

h, a

ll-m

etal

uinductive high temperature sensors

up to +180°C

INDUCTIVE SENSORSHIGH-TEMPERATURE SENSORS 2300

6


NOTES

INDUCTIVE SENSORS2300 HIGH-TEMPERATURE SENSORS



P all-metal sensors all around (sleeve, front- and backside) made of stainless steel

P with integrated amplifier

P connection via cable, M12 or Lemo-connector

active surface made of stainless steel or Vectra®devices usable up to +180°C

descriptionInductive high temperature sensors are available with integrat-ed amplifiers in the M8, M12, M18, M30, M50, M80 and cuboid designs. The maximum ambient temperature, depending on the version, can lie between +130°C and +180°C. The devices are available with silicone or teflon cables and also with M12 or Lemo-connectors.On the active surfaces, devices with full metal housings are absolutely impermeable to fluids and gases, against which the entire housing material is resistant.They are much more resistant to mechanical loads than con-ventional proximity switches. Easy cleaning with a stream jet is also satisfied.

To obtain the maximum switching distance, pay attention to the size of the object (standard target) and its surface finish (even surface).


environmentsu robotics applications in welding plantsu detection of hot workpieces in the steel industry, in found-

ries and glass manufactureu positioning hot parts in handling and conveying systemsu foodstuffs industry, chemical industry

dimensions M8 x 1 M12 x 1mm M18 x 1mm M30 x 1.5mm M50 x 1.5mm M80 x 1.5mm 8 x 40 x 8mm 12 x 55 x 12mm 12 x 66 x 12mm 40 x 40mm flush switching distance 2 to 10mmnon-flush switching distance 4 to 50mm

6




I inductive sensor

IB flushIC flush, all-metalIN non-flush



switching distance / norm measuring plateThe distance to the sensor surface, where a metal causes a change in the switching state, is called switching distance. This distance is not the same for all metals. That is why a so-called correction factor has been specified for the respective metal, e.g. copper or aluminum. The nominal switching distance is determined by a norm measuring plate. This is a quadratic metal plate made from steel (St37) with a thickness of 1mm and a smoothed surface for determining the switching distance Sn, otherwise the edge length is the same as the diameter of the active surface.One differentiates between the normal switching distance Sn, which is determined without consideration for manufacturing tolerances or external influences, and the operational switching distance Sa.The safe operational switching distance is between 0 and 81% of Sn (0< Sa< 0.81 x Sn).




output circuitFor the switching outputs of DC devices, a differentiation is made between PNP and NPN. For PNP outputs the load is connected in such a way that it is energized (positive switching) when the sensor is driven to full output (damping). NPN devices maintain their load permanently energized, switching the earth connection only (negative switching). A corresponding wiring diagram is supplied with every sensor.

series connectionWhen a number of sensors are connected in series, the voltage drop of each device should be taken into account in order to ensure that even the final device also receives the required operating voltage. The internal electronics permits a maximum of 3 devices to be connected in series.To be operationally safe the connection in series of 3-wire PNP sensors requires a logical AND-gate, e.g. VL250100.




switching frequencyThe switching frequency states the maximum number of available switching operations per second. Every switching operation of the inductive proximity switch causes the oscillating circuit to move. The time needed for the oscillation puts a limit on the switching frequency. For half the nominal switching distance the pulse to pause ratio should be at least 1 : 2,i.e. when choosing the right proximity switch, a compromise needs to be made between the size of the sensor and the switching frequency. General rule: The larger the sensor, the lower the switching frequency.


6



metal threads

M8 = 3NmM12 = 20NmM18 = 50NmM30 = 150NmM50 = 200NmM80 = 200Nm






correction factors:Specify the reduction in the switching distance, if materials other than steel St37 are used. The change in the switching distance depends on the type, characteristics (internal structure), size and the geometry of the material that is to be detected.typical correction factors: St: 1 V2A: approx. 0.7 Ms: approx. 0.4 Al: approx. 0.3 Cu: approx. 0.2In order to assess the approximate switching distance on the materials which differ from St37, the switching distance for St37 has to be multiplied by the appropriate correction factor.

repeat accuracy:The repeat accuracy (according to IEC 60947-5-2 / EN 60947-5-2) is the repeat accuracy of the real switching distance Sr over a period of 8 hours at an ambient temperature of (23 ± 5)°C and a defined operating voltage. The specified repeat accuracy corresponds to this definition. Generally the repeat accuracy is considerably better in case of sequent measurements.



switching point drift:The switching point shifts due to the change e.g. in ambient temperature.




TECHNICAL DATAswitching distance 2mm 2mm 2mm 3mm output signal pnp, no pnp, nc pnp, no pnp, no

operating voltage 10 … 30V DC 10 … 30V DC 10 … 35V DC 10 … 35V DC current consumption (w/o load) ≤ 15mA ≤ 15mA ≤ 15mA ≤ 15mA output current (max. load) 50mA 50mA 80mA 120mA voltage drop (max. load) 2.0V DC 2.0V DC 2.0V DC 2.0V DC hysteresis 3 … 15% 3 … 15% 3 … 15% 3 … 15% switching frequency 600Hz 600Hz 600Hz 500Hz

display (signal) - - - yellow LED short-circuit protection + + + + reverse polarity protection + + + +

dimensions M8x1 M8x1 M8x1 M12x1 housing material stainl. steel stainl. steel stainl. steel stainl. steel material (front cap) Vectra® Vectra® Vectra® Vectra® length (thread/complete) 53mm / 60mm 53mm / 60mm 53mm / 60mm 48mm / 56mm operating temperature 0 … +140°C 0 … +140°C 0 … +140°C 0 … +130°C degree of protection (EN 60529) IP65 IP65 IP65 IP65

connection see above see above M12 cable connector see above connection accessories - - e.g. VK50H026 - mounting accessories (clip) AY000098 AY000098 AY000099 AY000099

switching distance 2mm 2mm 2mm 3mmoperating temperature 0 … +140°C 0 … +140°C 0 … +140°C 0 … +130°Coutput signal pnp, no pnp, nc pnp, no pnp, nomounting flush flush flush flush

2m silicone cable IB080150 IB080250 - IB1201555m silicone cable IB080151 IB080251 - IB12015610m silicone cable IB080152 IB080252 - IB1201572m teflon cable IB0801T0 - - -5m teflon cable IB0801T1 - - -10m teflon cable IB0801T2 - - -M12 cable connector - - IB08012W -

silicone cable Ø 3.5mm teflon cable Ø 3mm

6





display (signal) - - - - short-circuit protection + + + + reverse polarity protection + + + +


connection see above 2m silicone cable Lemo mini-connector M12-connector connection accessories - - e.g. VK2000L4 e.g. VK50H026 mounting accessories AY000099 AY000099 AY000099 AY000099

switching distance 3mm 3mm 3mm 3mm operating temperature 0 … +150°C 0 … +150°C 0 … +150°C 0 … +150°C output signal pnp, no pnp, nc pnp, no pnp, no mounting flush flush flush flush 2m silicone cable IB120150 IB120250 - - 5m silicone cable IB120151 - - - 10m silicone cable IB120152 - - - 2m teflon cable IB1201T0 - - - 5m teflon cable IB1201T1 - - - 10m teflon cable IB1201T2 - - - M12-connector - - - IB12012W Lemo mini-connector - - IB1201L0 -

silicone cable Ø 5mmteflon cable Ø 3mm




TECHNICAL DATAswitching distance 4mm 4mm 4mm 4mm output signal pnp, no pnp, no pnp, nc pnp, no


display (signal) yellow LED - - - short-circuit protection + + + + reverse polarity protection + + + +


connection see above see above 2m silicone cable M12-connector connection accessories - - - e.g. VK50H026 mounting accessories AY000099 AY000099 AY000099 AY000099

switching distance 4mm 4mm 4mm 4mm operating temperature 0 … +130°C 0 … +150°C 0 … +150°C 0 … +150°C output signal pnp, no pnp, no pnp, nc pnp, no mounting non-flush non-flush non-flush non-flush

2m silicone cable IN120155 IN120150 IN120250 - 5m silicone cable IN120156 IN120151 - - 10m silicone cable IN120157 IN150152 - - 2m teflon cable - IN1201T0 - - 5m teflon cable - IN1201T1 - - 10m teflon cable - IN1201T2 - - M12-connector - - - IN12012W

6



TECHNICAL DATAswitching distance 5mm 5mm 5mm 5mm output signal pnp, no pnp, no pnp, nc npn, no




connection see above see above see above see above connection accessories - - - - mounting accessories AY000100 AY000100 AY000100 AY000100

switching distance 5mm 5mm 5mm 5mm operating temperature 0 … +130°C 0 … +180°C 0 … +180°C 0 … +180°C output signal pnp, no pnp, no pnp, nc npn, no mounting flush flush flush flush

2m silicone cable IB180155 IB180150 IB180250 IB181150 5m silicone cable IB180156 IB180151 IB180251 10m silicone cable IB180157 IB180152 IB180252 IB181152 2m teflon cable - IB1801T0 - - 5m teflon cable - IB1801T1 IB1802T1 - 10m teflon cable - IB1801T2 - -







display (signal) - - - yellow LED short-circuit protection + + + + reverse polarity protection + + + +

dimensions M18x1 M18x1 M18x1 M18x1 housing material stainl. steel stainl. steel stainl. steel stainl. steel material (front cap) Vectra® Vectra® Vectra® Vectra® length (thread/complete) 60mm / 83mm 60mm / 83mm 60mm / 84.5mm 60mm / 77mm operating temperature 0 … +180°C 0 … +180°C 0 … +150°C 0 … +130°C degree of protection (EN 60529) IP50 IP50 IP65 IP65

connection Lemo-connector Lemo-connector M12-connector see above connection accessories e.g. VK200940 e.g. VK200940 e.g. VK50H026 - mounting accessories AY000100 AY000100 AY000100 AY000100

switching distance 5mm 5mm 5mm 8mm operating temperature 0 … +180°C 0 … +180°C 0 … +150°C 0 … +130°C output signal pnp, no pnp, nc pnp, no pnp, no mounting flush flush flush non-flush

2m silicone cable - - - IN180155 5m silicone cable - - - IN180156 10m silicone cable - - - IN180157 M12-connector - - IB18012W - Lemo connector IB180140 IB180240 - -

6



TECHNICAL DATA switching distance 8mm 8mm 8mm 8mm output signal pnp, no pnp, nc npn, no pnp, no




connection see above see above see above M12-connector connection accessories - - - e.g. VK50H026 mounting accessories AY000100 AY000100 AY000100 AY000100

switching distance 8mm 8mm 8mm 8mm operating temperature 0 … +180°C 0 … +180°C 0 … +180°C 0 … +150°C output signal pnp, no pnp, nc npn, no pnp, no mounting non-flush non-flush non-flush non-flush 2m silicone cable IN180150 IN180250 IN181150 - 5m silicone cable IN180151 - IN181151 - 10m silicone cable IN180152 - IN181152 - 2m teflon cable IN1801T0 IN1802T0 - - 5m teflon cable IN1801T1 - - - 10m teflon cable IN1801T2 - - - M12-connector - - - IN18012W





TECHNICAL DATA switching distance 10mm 10mm 10mm 10mm output signal pnp, no pnp, no pnp, no pnp, nc



dimensions M30x1.5 M30x1.5 M30x1.5 M30x1.5 housing material stainl. steel stainl. steel stainl. steel stainl. steel material (front cap) Vectra® Vectra® Vectra® Vectra® length (thread/complete) 60mm / 70mm 60mm / 83mm 61mm / 85mm 61mm / 85mm operating temperature 0 … +130°C 0 … +130°C 0 … +150°C 0 … +150°C degree of protection (EN 60529) IP65 IP50 IP65 IP65

connection see above Lemo-connector M12-connector M12-connector connection accessories - e.g. VK200940 e.g. VK50H026 e.g. VK50H026 mounting accessories AY000101/AY000104 AY000101/AY000104 AY000101/AY000104 AY000101/AY000104

switching distance 10mm 10mm 10mm 10mm operating temperature 0 … +130°C 0 … +130°C 0 … +150°C 0 … +150°C output signal pnp, no pnp, no pnp, no pnp, nc mounting flush flush flush flush

2m silicone cable IB300155 - - - 5m silicone cable IB300156 - - - 10m silicone cable IB300157 - - - M12-connector - - IB30012W IB30022W Lemo connector - IB300145 - -

6



switching distance 10mm 10mm 10mm 10mm operating temperature 0 … +180°C 0 … +180°C 0 … +180°C 0 … +180°C output signal pnp, no pnp, nc pnp, no pnp, nc mounting flush flush flush flush 2m silicone cable IB300150 IB300250 - - 5m silicone cable IB300151 - - - 10m silicone cable IB300152 - - - 2m teflon cable IB3001T0 - - - 5m teflon cable IB3001T1 - - - 10m teflon cable IB3001T2 - - - Lemo-connector - - IB300140 IB300240

TECHNICAL DATA switching distance 10mm 10mm 10mm 10mm output signal pnp, no pnp, nc pnp, no pnp, nc




connection see above see above see above see aboveconnection accessories - - e.g. VK200940 e.g. VK200940 mounting accessories AY000101/AY000104 AY000101/AY000104 AY000101/AY000104 AY000101/AY000104




switching distance 15mm 15mm 15mm 15mm operating temperature 0 … +130°C 0 … +130°C 0 … +150°C 0 … +180°C output signal pnp, no pnp, no pnp, no pnp, no mounting non-flush non-flush non-flush non-flush 2m silicone cable IN300155 - - IN300150 5m silicone cable IN300156 - - IN300151 10m silicone cable IN300157 - - IN300152 2m teflon cable - - - IN3001T0 5m teflon cable - - - IN3001T1 10m teflon cable - - - IN3001T2 M12-connector - - IN30012W - Lemo-connector - IN300145 - -

TECHNICAL DATA switching distance 15mm 15mm 15mm 15mm output signal pnp, no pnp, no pnp, no pnp, no




connection see above Lemo-connector M12-connector see above connection accessories - e.g. VK200940 e.g. VK50H026 - mounting accessories AY000101/AY000104 AY000101/AY000104 AY000101/AY000104 AY000101/AY000104



6


switching distance 15mm 8mm 15mm operating temperature 0 … +180°C 0 … +140°C 0 … +140°C output signal pnp, no pnp, no pnp, no mounting non-flush flush non-flush 5m stainl. steel teflon cable - IB3001S1 - 10m stainl. steel teflon cable - IB3001S2 - 15m stainl. steel teflon cable - IB3001S3 IN3001S3 Lemo connector IN300140 - -

TECHNICAL DATAswitching distance 15mm 8mm 15mm output signal pnp, no pnp, no pnp, no

operating voltage 10 … 35V DC 10 … 35V DC 10 … 35V DC current consumption (w/o load) ≤ 15mA ≤ 15mA ≤ 15mA output current (max. load) 150mA 150mA 150mA voltage drop (max. load) 2.0V DC 2.0V DC 2.0V DC hysteresis 3 … 15% 3 … 15% 3 … 15% switching frequency 200Hz 200Hz 200Hz


dimensions M30x1.5 M30x1.5 M30x1.5 housing material stainl. steel stainl. steel stainl. steel material (front cap) Vectra® Vectra® Vectra® length (thread/complete) 60mm / 92mm 18mm / 18mm 18mm / 27mm operating temperature 0 … +180°C 0 … +140°C 0 … +140°C degree of protection (EN 60529) IP50 IP65 IP65

connection Lemo-connector see above see above connection accessories e.g. VK200940 - mounting accessories AY000101/AY000104 AY000101/AY000104 AY000101/AY000104



switching distance 20mm 20mm 25mm 25mm operating temperature 0 … +180°C 0 … +180°C 0 … +180°C 0 … +180°C output signal pnp, no pnp, no pnp, no pnp, no mounting flush flush non-flush non-flush 2m silicone cable IB500150 - IN500150 - 5m silicone cable IB500151 - IN500151 - 10m silicone cable IB500152 - IN500152 - 2m teflon cable IB5001T0 - IN5001T0 - 5m teflon cable IB5001T1 - IN5001T1 - 10m teflon cable IB5001T2 - IN5001T2 - Lemo connector - IB500140 - IN500140

TECHNICAL DATA switching distance 20mm 20mm 25mm 25mm output signal pnp, no pnp, no pnp, no pnp, no




connection see above Lemo-connector see above Lemo-connector connection accessories - e.g. VK200940 - e.g. VK200940 mounting accessories AY000101/AY000104 AY000101/AY000104 AY000101/AY000104 AY000101/AY000104



6



TECHNICAL DATAswitching distance 50mm 50mm output signal pnp, no pnp, no

operating voltage 10 … 35V DC 10 … 35V DC current consumption (w/o load) ≤ 15mA ≤ 15mA output current (max. load) 150mA 150mA voltage drop (max. load) 2.0V DC 2.0V DC hysteresis 3 … 15% 3 … 15% switching frequency 100Hz 100Hz

display (signal) - - short-circuit protection + + reverse polarity protection + +

dimensions M80x1.5 M80x1.5 housing material stainl. steel stainl. steel material (front cap) Vectra® Vectra® length (thread/complete) 40mm / 66mm 40mm / 81mm operating temperature 0 … +160°C 0 … +160°C degree of protection (EN 60529) IP65 IP50

connection see above Lemo connector connection accessories e.g. VK50H026 e.g. VK200940 mounting accessories AY000101/AY000104 AY000101/AY000104

switching distance 50mm 50mm operating temperature 0 … +160°C 0 … +160°C output signal pnp, no pnp, no mounting non-flush non-flush

2m silicone cable IN800150 - 5m silicone cable IN800151 - 10m silicone cable IN800152 - Lemo connector - IN800140



switching distance 2mm 4mm 25mm operating temperature 0 … +140°C 0 … +130°C 0 … +150°C output signal pnp, no pnp, no pnp, no mounting flush flush non-flush

2m silicone cable IB090150 IB130155 - 5m silicone cable IB090151 IB130156 - M12-connector - - IN40012W

TECHNICAL DATAswitching distance 2mm 4mm 25mm output signal pnp, no pnp, no pnp, no

operating voltage 10 … 30V DC 10 … 30V DC 10 … 35V DC current consumption (w/o load) ≤ 15mA ≤ 15mA ≤ 15mA output current (max. load) 50mA 200mA 200mA voltage drop (max. load) 2.0V DC 2.0V DC 2.0V DC hysteresis 3 … 15% 3 … 15% 3 … 15% switching frequency 600Hz 500Hz 200Hz


dimensions 8x40x8mm 12x55x12mm 40x40mm housing material stainl. steel stainl. steel stainl. steel material (front cap) Vectra® Vectra® Vectra® length (thread/complete) - / 40mm - / 55mm - / 55mm operating temperature 0 … +140°C 0 … +130°C 0 … +150°C degree of protection (EN 60529) IP65 IP65 IP65

connection see above see above M12-connector connection accessories - - e.g. VK50H026 mounting accessories - - e.g. AY000135

6



TECHNICAL DATAswitching distance 2mm 2mm 2mm 5mm output signal pnp, no pnp, no pnp, no pnp, no


display (signal) yellow LED yellow LED yellow LED yellow LED short-circuit protection + + + + reverse polarity protection + + + +

dimensions M12x1 M12x1 M12x1 M18x1 housing material stainl. steel stainl. steel stainl. steel stainl. steel material (front cap) stainl. steel stainl. steel stainl. steel stainl. steel length (thread/complete) 45mm / 59mm 45mm / 70mm 45mm / 71mm 60mm / 71mm operating temperature -25 … +130°C -25 … +130°C -25 … +130°C -25 … +130°C degree of protection (EN 60529) IP65 IP50 IP65 IP65

connection 2m silicone cable Lemo mini-connector M12-connector 2m silicone cableconnection accessories - e.g. VK2000L4 e.g. VK50H026 - mounting accessories AY000099 AY000099 AY000099 AY000100

switching distance 2mm 2mm 2mm 5mm operating temperature -25 … +130°C -25 … +130°C -25 … +130°C -25 … +130°C output signal pnp, no pnp, no pnp, no pnp, no mounting flush flush flush flush 2m silicone cable IC120155 - - IC180155 M12-connector - - IC12012W - Lemo mini-connector - IC1201L0 - -



TECHNICAL DATAswitching distance 5mm 10mm 10mm 2mm output signal pnp, no pnp, no pnp, no pnp, no


display (signal) - yellow LED - - short-circuit protection + + + + reverse polarity protection + + + +

dimensions M18x1 M30x1.5 M30x1.5 12x66x12mm housing material stainl. steel stainl. steel stainl. steel stainl. steel material (front cap) stainl. steel stainl. steel stainl. steel stainl. steel length (thread/complete) 60mm / 83mm 60mm / 71mm 60mm / 83mm - / 66mm operating temperature -25 … +130°C -25 … +130°C -25 … +130°C -25 … +130°C degree of protection (EN 60529) IP50 IP65 IP50 IP50

connection Lemo connector 2m silicone cable Lemo connector Lemo mini-connectorconnection accessories e.g. VK200940 - e.g. VK200940 e.g. VK2000L4 mounting accessories AY000100 AY000101/AY000104 AY000101/AY000104 -

switching distance 5mm 10mm 10mm 2mm operating temperature -25 … +130°C -25 … +130°C -25 … +130°C -25 … +130°C output signal pnp, no pnp, no pnp, no pnp, no mounting flush flush flush flush

2m silicone cable - IC300155 - - Lemo connector IC180145 - IC300145 - Lemo mini-connector - - - IC1301L0

6



cable socket Lemosa mini, angular Lemosa mini, straight Lemosa, straightnumber of pins (assigned) 3-wire 3-wire 3-wire

article-no. VK2000L0, silicone VK2000L4, silicone VK200940, siliconelength 2m 2m 2m

article-no. VK5000L0, silicone VK5000L4, silicone VK500940, silicone length 5m 5m 5m

article-no. VKA000L0, silicone VKA000L4, silicone VKA00940, siliconelength 10m 10m 10m

article-no. VK2000L1, teflon VK2000L5, teflon VK200941, teflonlength 2m 2m 2m

article-no. VK5000L1, teflon VK5000L5, teflon VK500941, teflon length 5m 5m 5m

article-no. VKA000L1, teflon VKA000L5, teflon VKA00941, teflonlength 10m 10m 10m

article-no. - - VKB00941, teflonlength - - 20m

cable socket M12 cable socket M12 cable socket M12 cable socket M12 cable connector +150°C angular +150°C straight +150°C straight +150°C straight number of pins (assigned) 3-wire 3-wire 4-pin 4-pin

article-no. VK50H022 polyolefin VK50H026 polyolefin VK003524 VK003528 length 5m 5m field attachable field attachable

article-no. VKA0H022 polyolefin VKA0H026 polyolefin - - length 10m 10m - -



connection

PNP, no PNP, nc

mounting material

AY000098 for design M8x1, stainl. steel AY000099 for design M12x1, stainl. steel

AY000100 for design M18x1, stainl. steel AY000101 for design M30x1.5, stainl. steel

AY000104 for design M30x1.5, aluminum AY000135 for design 40

wire colors: bn = brown (1), bu = blue (3), bk = black (4)NPN, no





6




NOTES


flush

, non

-flus

h, a

mpl

ifier

uinductive high temperature sensors

up to +230°C

connection to amplifier


6


NOTES




P robust stain. steel housing

P connection to external amplifier

P connection with teflon cable, M12- or Lemo-con-nector

active surface made of Vectra®devices usable up to +230°C

descriptionInductive high temperature sensors are available in the M8, M18, M30, M50 and cubic designs. The connection is made via an external amplifier. The maximum ambient temperature for the M8 version is +140°C; for the M18, M30, M50 and cuboid versions it is +230°C. The devices are available with silicone or teflon cables and also with M12 or Lemo connectors. To obtain the maximum switching distance, pay attention to the size of the object (standard target) and its surface finish (even surface). The external evaluation electronics are available in three different versions. The M12 housing version (IV120450) for laying in cable ducts and the version with zinc diecast hous-

ing (IV400720) for mounting in the field are connected via M12 plug connectors and have degree of protection IP65. For switching cabinet installation on a top hat rail, model IV850700, which has terminal connections, is available.


environmentsu robotics applications in welding plants u detection of hot workpieces in the steel industry, in found-

ries and glass manufactureu positioning hot parts in handling and conveying systemsu foodstuffs industry, chemical industry

dimensions M8 x 1 M18 x 1mm M30 x 1.5mm M50 x 1.5mm 40 x 40mm

flush switching distance 2 to 20mmnon-flush switching distance 15 to 25mm

6




I inductive sensor

IB flushIN non-flushIV amplifier



switching distance / norm measuring plateThe distance to the sensor surface, where a metal causes a change in the switching state, is called switching distance. This distance is not the same for all metals. That is why a so-called correction factor has been specified for the respective metal, e.g. copper or alu-minum. The nominal switching distance Sn is determined by a norm measuring plate. This is a quadratic metal plate made from steel (St37) with a thickness of 1mm and a smoothed surface for determining the switching distance Sn, otherwise the edge length is the same as the diameter of the active surface.One differentiates between the normal switching distance Sn, which is determined without consideration for manufacturing tolerances or external influences, and the operational switching distance Sa.The safe operational switching distance is between 0 and 81% of Sn (0< Sa< 0.81 x Sn).




output circuitFor the switching outputs of direct current devices a differentiation is made between PNP and NPN. For PNP outputs the load is connected in such a way that it is energized (positive switching) when the sensor is driven to full output (damping). NPN devices maintain their load permanently energized, switching the earth connection only (negative switching). A corresponding wiring diagram is supplied with every sensor.

series connectionWhen a number of sensors are connected in series, the voltage drop of each device should be taken into account in order to ensure that the final device also receives the required operating voltage. The internal electronics permits a maximum of 3 devices to be connected in series.To be operationally safe the connection in series of 3-wire PNP sensors requires a logical AND-gate, e.g. VL250100.




switching frequencyThe switching frequency states the maximum number of available switching operations per second. Every switching operation of the inductive proximity switch triggers the oscillating circuit. The time needed for the oscillation puts a limit on the switching frequency. For half the nominal switching distance the pulse to pause ratio should be at least 1 : 2,i.e. when choosing the right proximity switch, a compromise needs to be made between the size of the sensor and the switching frequency. General rule: The larger the sensor, the smaller the switching frequency.


6



stainless steel threadM8 = 8NmM18 = 50NmM30 = 150NmM50 = 200Nm


nominal switching distance (Sn):The distance at which a metal part that is approaching the active surface of the proximity switch causes a change in the state of the switching output.

real switching distance (Sr):The actual switching distance may vary due to component tolerances or external influences. For devices of this series, it may vary from the nominal switching distance by up to max. ±20%.




correction factor:Specify the reduction in the switching distance, if materials other than steel St37 are used. The change in the switching distance depends on the type, characteristics (internal structure), size and the geometry of the material that is to be detected.typical correction factors: St37: 1 V2A: approx. 0.7 Ms: approx. 0.4 Al: approx. 0.3 Cu: approx. 0.2In order to assess the approximate switching distance on the materials which differ from St37, the switching distance for St37 has to be multiplied by the appropriate correction factor.

repeat accuracy The repeat accuracy (according to IEC 60947-5-2 / EN 60947-5-2) is the repeat accuracy of the real switching distance Sr over a period of 8 hours at an ambient temperature of (23 ± 5)°C and a defined operating voltage. The specified repeat accuracy corresponds to this definition. Generally the repeat accuracy is considerably better in case of sequent measurements.







switching distance 2mm 5mm 5mmoperating temperature 0 … +140°C 0 … +230°C 0 … +230°Cmounting flush flush flush

3m teflon cable/ IB086050 IB186050 IB186053M12-connector5m teflon cable/ - IB186051 -M12-connector10m teflon cable/ - IB186052 -M12-connector

TECHNICAL DATAswitching distance (Sn) 2mm 5mm 5mmmounting flush flush flushoutput signal see following pages see following pages see following pages

operating voltage see following pages see following pages see following pageshysteresis 2 ... 15% 2 ... 15% 2 ... 15%switching frequency 300Hz 300Hz 300Hz

reverse polarity protection + + +

dimensions M8x1 M18x1mm M18x1mmlength (thread/complete) 23mm / 30mm 25mm / 30mm 60mm / 70mmhousing material stainl. steel stainl. steel stainl. steelmaterial (front cap) Vectra® Vectra® Vectra®operating temperature 0 … +140°C 0 … +230°C 0 … +230°Cdegree of protection (EN 60529) IP50 IP50 IP50

connection 3m teflon cable/M12-connector see above 3m teflon cable/M12-connectorconnection accessories - - -mounting accessories AY000098 AY000100 AY000100


6


TECHNICAL DATAswitching distance (Sn) 10mm 10mm 15mm 15mmmounting flush flush non-flush non-flushoutput signal see following pages see following pages see following pages see following pages

operating voltage see following pages see following pages see following pages see following pageshysteresis 2 ... 15% 2 ... 15% 2 ... 15% 2 ... 15%switching frequency 200Hz 200Hz 150Hz 150Hz

reverse polarity protection + + + +

dimensions M30x1.5mm M30x1.5mm M30x1.5mm M30x1.5mmlength (thread/complete) 60mm / 70mm 60mm / 84mm 60mm / 79mm 60mm / 91mmhousing material stainl. steel stainl. steel stainl. steel stainl. steelmaterial (front cap) Vectra® Vectra® Vectra® Vectra®operating temperature 0 … +230°C 0 … +230°C 0 … +230°C 0 … +230°Cdegree of protection (EN 60529) IP50 IP50 IP50 IP50

connection see above Lemo-connector see above Lemo-connectorconnection accessories - e.g. VK206941 - e.g. VK206941mounting accessories AY000101 AY000101 AY000101 AY000101

switching distance 10mm 10mm 15mm 15mmoperating temperature 0 … +230°C 0 … +230°C 0 … +230°C 0 … +230°Cmounting flush flush non-flush non-flush

3m teflon cable/ IB306050 - IN306050 -M12-connector5m teflon cable/ IB306051 - IN306051 -M12-connector10m teflon cable/ IB306052 - IN306052 -M12-connector15m teflon cable/ - - IN306053 -M12-connectorLemo connector - IB306040 - IN306040



TECHNICAL DATAswitching distance (Sn) 20mm 20mm 25mmmounting flush flush non-flushoutput signal see following pages see following pages see following pages



dimensions M50x1.5mm M50x1.5mm M50x1.5mmlength (thread/complete) 41mm / 51mm 41mm / 64mm 41mm / 64mmhousing material stainl. steel stainl. steel stainl. steelmaterial (front cap) Vectra® Vectra® Vectra®operating temperature 0 … +230°C 0 … +230°C 0 … +230°Cdegree of protection (EN 60529) IP50 IP50 IP68

connection see above Lemo-connector Lemo-connectorconnection accessories - e.g. VK206941 e.g. VKB0C590mounting accessories AY000102 AY000102 AY000102

switching distance 20mm 20mm 25mmoperating temperature 0 … +230°C 0 … +230°C 0 … +230°Cmounting flush flush non-flush

3m teflon cable/ IB506050 - -M12-connector5m teflon cable/ IB506051 - -M12-connector10m teflon cable/ IB506052 - -M12-connectorLemo connector - IB506040 IN50C543


6


TECHNICAL DATAswitching distance (Sn) 25mm 25mm 20mmmounting non-flush non-flush non-flushoutput signal see following pages see following pages see following pages



dimensions M50x1.5mm M50x1.5mm 40x40x66mmlength (thread/complete) 41mm / 63.5mm 41mm / 77mm -housing material stainl. steel stainl. steel stainl. steelmaterial (front cap) Vectra® Vectra® Vectra®operating temperature 0 … +230°C 0 … +230°C 0 … +230°Cdegree of protection (EN 60529) IP50 IP50 IP50

connection see above see above Lemo-connectorconnection accessories - e.g. VK206941 e.g. VK206F41mounting accessories AY000102 AY000102 AY000135

switching distance 25mm 25mm 20mmoperating temperature 0 … +230°C 0 … +230°C 0 … +230°Cmounting non-flush non-flush non-flush

3m teflon cable/ IN506050 - -M12-connector5m teflon cable/ IN506051 - -M12-connector10m teflon cable/ IN506052 - -M12-connectorLemo connector - IN506040 IN406040



article-no. IV120450connection sensor: M12 cable socket 300mm supply / connection: 2m PUR-cableversion integrated line monitoring *

TECHNICAL DATAoutput signal pnp / no, pnp / nc

operating voltage 7 … 35V DCcurrent consumption (w/o load) ≤ 25mAoutput current (max. load) 300mAvoltage drop (max. load) 2.0V DCswitching frequency 1kHz

short-circuit protection +reverse polarity protection +

dimensions M12x1mmhousing material stainl. steellength (thread/complete) 48mm / 55mmoperating temperature -25 … +75°Cdegree of protection (EN 60529) IP65

connection see abovemounting accessories AY000099

* in event of short circuit or interruption in the line between sensor and amplifier, both outputs switchto "high".

M12 cable socket


6


TECHNICAL DATAoutput signal pnp, no/nc, alarm pnp, no/nc, alarm

operating voltage 10 … 30V DC 10 … 30V DCcurrent consumption (w/o load) ≤ 25mA ≤ 25mAoutput current (max. load) 200mA 200mAvoltage drop (max. load) 2.0V DC 2.0V DCswitching frequency 1kHz 1kHz

display (signal) + +short-circuit protection + +reverse polarity protection + +

dimensions 40x42x88mm 17.8x85x65mmhousing material aluminum plasticlength (thread/complete) - / - - / -operating temperature -25 … +75°C -25 … +75°Cdegree of protection (EN 60529) IP65 IP20

connection see above see above

* in event of short circuit or interruption in the line between sensor and amplifier, both outputs switchto "high".

article-no. IV400720 IV850700connection sensor: M12 cable socket sensor: terminals supply / output: M12-connector supply / output: terminalsversion integrated line monitoring * integrated line monitoring *



adjustment options IV400720 / IV850700DIP switch On Off1 output 2 = exclusive-OR output 2 = alarm2 setting control on setting control off3 time delay on time delay off4 turn-on delay 0-1s (potentiometer) turn-off delay 0-1s (potentiometer)5 high hysteresis / high setting control small hysteresis / small setting control6 3-wire sensors 2-wire sensors

green LED 1: operating voltage Green/yellow LED 1: operating voltage / object identifiedyellow LED 2: object identified Red LED 2: lights up: sensor is not connectedred LED 3: lights up: sensor is not connected flashes: functional reserve range flashes: functional reserve range lights up + yellow LED flashes: lights up + yellow LED flashes: short circuit at the output short circuit at the output

setting control:If the setting control is activated (DIP switch 2 ‘on’), the red LED flashes in order to identify the standby functional reserve. An object that is to be recorded must be located sufficiently close to the sensor so that the yellow LED lights up and the red LED does not flash. Objects that don't have to be recorded must be sufficiently far away from the sensor so that both LEDs do not light up. If the red LED flashes while the sensor is running, then it has to be re-adjusted.

alarm output:The alarm output is activated by switching DIP switch 1 to the ‘on’ setting. If no sensor is connected, or if the line to the sensor is disconnected, the alarm output will switch on. In addition, the red LED will light up. The alarm output also switches on if there is a short circuit on the switching output of the amplifier. In this case, the red LED lights up and the yellow LED flashes.

hysteresis setting:The hysteresis can be set in two stages in order to adjust the size of the connected sensors. For large sensors (designs 30 and 50), it is recommended that the “small” setting be selected; for small sensors (design 18), the “large” setting should be used.The sensors depicted in this catalog that are designed for operation with an external amplifier are two-wire sensors. The electrical connection between the sensor and amplifier takes place via two wires: brown (PIN 1 of M12-connector) and blue (PIN 3 of M12-connector).

pin configuration IV400720 IV850700

Only one sensor can be connected!

LED 1 LED 2 LED 3 potentiometer

DIP switch

LED 1LED 2 Potentiometer

DIP switch


6

switching output off (yellow LED off)

switching output on (yellow LED lights up)

stable on standby function

(red LED flashes)

stable off

distance of the object from the sensors


connection - sensor: lemo, straight, shielded amplifier: M12-connectorouter jacket material - teflonversion - connection to amplifier IV120450 / IV400720

article-no. - VKB0C590length 20m

connection sensor: lemo, straight, shielded sensor: lemo, straight, shielded - amplifier: M12-connectorouter jacket material teflon teflonversion connection to amplifier connection to amplifier

IV850700 IV120450 / IV400720

article-no. VK206941 VK206F41length 2m 2m

article-no. VK506941 VK506F41length 5m 5m

article-no. VKA06941 VKA06F41length 10m 10m



connection

connector device 2-wire (sensors) amplifier IV120450

mounting accessories

AY000098 for design M8x1, stainl. steel AY000099 for design M12x1, stainl. steel AY000100 for design M18x1, stainl. steel

AY000101 for design M30x1.5, stainl. steel AY000102 for design M50x1.5, aluminum AY000104 for design M30x1.5, aluminum

AY000135 for design 40x40, stainl. steel


amplifier IV400720 amplifier IV850700






6



NOTES


P short response time due to high switching frequency

P LED-display of the switching state

P miniature design with integrated amplifier

P connection with cable or 3-pin M8-connector

dimensions 16 x 28 x 10mm 16 x 28 x 10.4mm 26 x 40 x 12mm

flush sensing range 2mmnon-flush sensing range 4mm

flush or non-flush mounting several connection versions

descriptionThe electronics of these sensors are cast into the square-sha-ped plastic housing and as such, they are protected from all kinds of vibrations.Examples for the areas of application in which these inductive sensors are used include among others: mechanical enginee-ring/plant construction, automotive industry, warehouse and materials handling equipment, packaging industry, printing and paper industries, chemical and process engineering.An inductive sensor (proximity switch, position sensor, initi-ator) is a contactless switch which reliably detects metallic objects. In the case of inductive sensors, a correction factor is stated which evaluates the reduction of the sensing range in relation to the different materials that the object is made from. This factor depends on the type, characteristics (internal struc-ture), size and geometry of the material that the object to be detected is made from. The stated sensing range value relates

to steel St37 (factor 1 steel). In order to assess the approximate sensing range for materials which differ from this, the value has to be multiplied by the appropriate correction factor.In order to ensure that the device runs reliably, it is essential that the fitting conditions on this data sheet are adhered to.For realizing the maximum sensing range, the size and charac-teristics of the object to be detected (standard target and/or flat surface) should be taken into account.

application examplesuinspection of die-cut metal parts of various sizesuintegration, even in machine parts with very limited availa-

ble spaceuposition switches in the feeding technology sectorudetection of objects through the walls of non-metallic con-

tainers and tubes

INDUCTIVE SENSORSNORM SENSING RANGES 2400

6


TECHNICAL DATAsensing range (Sn) 2.0mm 2.0mm 2.0mm 2.0mmmounting flush flush flush flushoutput signal pnp, no pnp, no pnp, no pnp, no

operating voltage 10 … 30V DC 10 … 30V DC 10 … 30V DC 10 … 30V DCcurrent consumption (w/o load) ≤ 11mA ≤ 13mA ≤ 11mA ≤ 13mAoutput current (max. load) 200mA 200mA 200mA 200mA voltage drop (max. load) 1.6V DC 2.4V DC 1.6V DC 2.4V DCnorm trimming plate EN 60947-5-2 EN 60947-5-2 EN 60947-5-2 EN 60947-5-2 hysteresis 5 … 15% of Sn 5 … 15% of Sn 5 … 15% of Sn 5 … 15% of Snswitching frequency 800Hz 1kHz 800Hz 1kHz


dimensions 16x28x10.4mm 16x28x10mm 16x28x10.4mm 16x28x10mmhousing material PA 6.6 PA 6.6 PA 6.6 PA 6.6operating temperature -25 … +70°C -25 … +70°C -25 … +70°C -25 … +70°Cdegree of protection (EN60529) IP67 IP67 IP67 IP67

connection 2m PVC-cable, 3-wire 2m PVC-cable, 3-wire M8-connector, 3-pin M8-connector, 3-pincojnnection accessories - - e.g. VK200071 e.g. VK200071mounting accessories AY000118 AY000118 AY000118 AY000118(universal holder)

article-no. IB160100 IB160105 IB160170 IB160175 sensing range 2.0mm 2.0mm 2.0mm 2.0mm mounting flush flush flush flushconnection 2m PVC cable 2m PVC cable M8 connector M8 connector lateral straight lateral straight

INDUCTIVE SENSORS2400 NORM SENSING RANGES


TECHNICAL DATAsensing range (Sn) 4.0mm 2.0mmmounting flush flush output signal pnp, no pnp, no

operating voltage 10 … 30V DC 10 … 30V DCcurrent consumption (w/o load) ≤ 13mA ≤ 13mAoutput current (max. load) 200mA 200mA voltage drop (max. load) 2.4V DC 2.4V DCnorm trimming plate EN 60947-5-2 EN 60947-5-2hysteresis 5 … 15% of Sn 5 … 15% of Sn switching frequency 800Hz 1kHz

display (signal) yellow LED yellow LED short-circuit protection + +reverse polarity protection + +

dimensions 26x40x12mm 26x40x12mm housing material PA6.6 PBToperating temperature -25 … +70°C -25 … +70°C degree of protection (EN 60529) IP67 IP67

connection M8-connector, 3-pin 2m PVC-cable, 3-wire connection accessories e.g. VK200071 -mounting accessories AY000118 AY000118(universal holder)

article-no. IN160175 IB260100 sensing range 4.0mm 2.0mm mounting non-flush flush connection M8 connector 2m PVC cable straight diagonal


6


article-no. IB260170 IN260100 IN260170 sensing range 2.0mm 4.0mm 4.0mm mounting flush non-flush non-flushconnection M8 connector 2m PVC cable M8 connector diagonal diagonal diagonal

TECHNICAL DATAsensing range (Sn) 2.0mm 4.0mm 4.0mm mounting flush non-flush non-flushoutput signal pnp, no pnp, no pnp, no

operating voltage 10 … 30V DC 10 … 30V DC 10 … 30V DCcurrent consumption (w/o load) ≤ 13mA ≤ 13mA ≤ 13mAoutput current (max. load) 200mA 200mA 200mA voltage drop (max. load) 2.4V DC 2.4V DC 2.4V DC norm trimming plate EN 60947-5-2 EN 60947-5-2 EN 60947-5-2 hysteresis 5 … 15% of Sn 5 … 15% of Sn 5 … 15% of Snswitching frequency 1kHz 1kHz 1kHz

display (signal) yellow LED yellow LED yellow LED short-circuit protection + + +reverse polarity protection + + +

dimensions 26x40x12mm 26x40x12mm 26x40x12mm housing material PBT PBT PBToperating temperature -25 … +70°C -25 … +70°C -25 … +70°Cdegree of protection (EN 60529) IP67 IP67 IP67

connection M8-connector, 3-pin 2m PVC cable, 3-wire M8-connector, 3-pinconnection accessories e.g. VK200071 - e.g. VK200071mounting accessories AY000118 AY000118 AY000118(universal holder)



connection



Correction factors indicate the change relating to the sensing range if materials other than St37 (steel) are used. The change in the sensing range depends on the type, characteristics (internal structure), size and the geometry of the material that is to be detected. In order to assess the approximate sensing range on the materials which differ from St37, the value for St37 has to be multiplied by the appropriate correction factor.

correction factors

material factorstainless steel (V2A) approx. 0.7brass (Ms) approx. 0.4aluminum (Al) approx. 0.4copper (Cu) approx. 0.3

mounting parameters

flush mounting non-flush mounting


6



AY000088 base module * jaw: stainless steel, ball pin: galvanized steelAY000118 mounting kit for sensors Ix16, Ix26 stainless steel

* The AY000088 base module is contained in every mounting kit. Material of bolts and nuts: galvanized steel





mounting accessories (universal holder) AY000118




P shock-resistant plastic housing

P DC-devices short-circuit and reverse polarity pro-tected

P switching state display with yellow LED

P operating voltage display with green LED

P M20-thread for cable gland and connection in the junction box


active surface flexible adjustableconnector or terminal connection

descriptionIn each case, these inductive proximity switches consist of three functional parts. The bottom part with the cable insert for M20 screw connections and the connection terminals can be fastened regardless of the rest of the electronics. The unit can be conveniently fitted to a machine using the feedthrough holes on the base. Accordingly, the electronics module is only inserted from above and it is fixed with screws. This way, the active surface can still be adjusted in five different detection and/or approach directions by turning the head.The modular construction of these sensors provide a whole range of applications and if necessary, the sensors can be exch-anged very quickly without having to reconnect the connecting lead which is time consuming.The fields of application of these inductive sensors cover all conceivable areas of automation technology.The electronics of these sensors are cast into the square-sha-ped plastic housing and as such, they are protected from all

kinds of vibrations.For realizing the maximum switching distance, the size and characteristics of the object to be detected (standard target) should be taken into account.

application examplesu creep speed switches / stop switches for units of

movementu position switches in the feeding technology sectoru integration in machine parts subject to rough industrial

environmentsu checking the presence of metal parts with various dimensi-


tainers and tubes

dimensions 40 x 40 x 118mm 40 x 40 x 120mm flush switching distance 15mmnon-flush switching distance 30 … 40mm


6


article-no. IB400400 IB400420 IB404300switching distance (Sn) 15mm 15mm 15mmmounting flush flush flushoutput pnp, no/nc pnp, no/nc AC, no/ncconnection terminals M12-connector terminals

article-no. IB400100 IB400120 -switching distance (Sn) 15mm 15mm -mounting flush flush -output pnp, no pnp, no -connection terminals M12-connector -

TECHNICAL DATAswitching distance (Sn) 15mm 15mm 15mmoutput signal see above see above see above

operating voltage 10 … 60V DC 10 … 60V DC 20 … 250V ACcurrent consumption (w/o load) ≤ 10mA ≤ 10mA ≤ 2mAoutput current (max. load) 200mA 200mA 500mAvoltage drop (max. load) 2.8V DC 2.8V DC 5.0V ACNorm measuring plate acc. to EN 60947-5-2 acc. to EN 60947-5-2 acc. to EN 60947-5-2 hysteresis typ. < 5% typ. < 5% typ. < 5%repeat accuracy * * *correction factors (St37/Alu/Ms) 1.0 / 0.3 / - 1.0 / 0.3 / - 1.0 / 0.3 / -correction factors (stainl. steel/Cu) 0.75 / 0.25 0.75 / 0.25 0.75 / 0.25 switching frequency 150Hz 150Hz 20Hz

display (signal) yellow LED yellow LED yellow LEDdisplay (operation) green LED green LED green LEDshort-circuit protection + + -reverse polarity protection + + +

dimensions 40x40x118mm 40x40x118mm 40x40x118mmhousing material PBT plastic PBT plastic PBT plasticmaterial (front cap) PBT plastic PBT plastic PBT plasticoperating temperature -25 … +70°C -25 … +70°C -25 … +70°Cdegree of protection (EN 60529) IP68 IP67 IP68

connection terminals M12-connector, 4-pin terminals connection accessories - e.g. VK200325 -* not specified




operating voltage 10 … 60V DC 10 … 60V DC 20 … 250V AC 10 … 65V ACcurrent consumption (w/o load) ≤ 10mA ≤ 10mA ≤ 2mA ≤ 20mAoutput current (max. load) 200mA 200mA 500mA 300mAvoltage drop (max. load) 2.8V DC 2.8V DC 5.0V AC 2.5V DCNorm measuring plate acc. to EN 60947-5-2 acc. to EN 60947-5-2 acc. to EN 60947-5-2 acc. to EN 60947-5-2hysteresis typ. < 5% typ. < 5% typ. < 5% < 20%repeat accuracy * * * 1.5mmcorrection factors (St37/Alu/Ms) 1.0 / 0.45 / - 1.0 / 0.45 / - 1.0 / 0.45 / - 1.0 / 0.5 /correction factors (stainl. steel/Cu) 0.8 / 0.4 0.8 / 0.4 0.8 / 0.4 0.8 / 0.4switching frequency 100Hz 100Hz 20Hz 20Hz

display (signal) yellow LED yellow LED yellow LED yellow LEDdisplay (operation) green LED green LED green LED green LEDshort-circuit protection + + - +reverse polarity protection + + + +

dimensions 40x40x118mm 40x40x118mm 40x40x118mm 40x40x120mmhousing material PBT plastic PBT plastic PBT plastic PBT plasticmaterial (front cap) PBT plastic PBT plastic PBT plastic PBT plastic operating temperature -25 … +70°C -25 … +70°C -25 … +70°C -25 … +85°Cdegree of protection (EN 60529) IP68 IP67 IP68 IP65

connection terminals M12-connector, 4-pin terminals terminalsconnection accessories - e.g. VK200325 - -* not specified

article-no. IN400400 IN400420 IN404300 IN420306switching distance (Sn) 30mm 30mm 30mm 40mmmounting non-flush non-flush non-flush non-flushoutput pnp, no/nc pnp, no/nc AC, no/nc pnp, no/ncconnection terminals M12-connector terminals terminals

article-no. IN400100 - - -switching distance (Sn) 30mm - - -mounting non-flush - - -output pnp, no - - -connection terminals - - -


6



connection

terminals, connector device, pnp no terminals, connector device, pnp no/nc





terminals AC no terminals AC nc

IN420306 terminals, pnp no/nc selectable



P short response time due to high switching frequency

P LED display of the switching state


P miniature design with integrated amplifier

P connection with cable and M8-connector

dimensions 5 x 25 x 5mm to 12 x 65 x 12mm

flush switching distance 0.8mm 1.5mm 2mm 4mm

semi-flush switching distance 3mm

mounting flush or semi-flushvarious switching distances

descriptionThe electronics of these inductive sensors are cast into the square-shaped metal housing and as such, they are protected from all kinds of vibrations.In spite of the very small dimensions (5x25x5mm), sensor IBQ50174 features a convenient plug connection. This is pos-sible due to the fact that an M8 connector is connected via a short (150mm) line. Sensors with article number IB09… (8x8mm) are available in different versions with respect to switching distance and housing length.Sensors with article number IB13… (12x12mm) offer an increa-sed switching distance of 4mm.For realizing the maximum switching distance, the size and characteristics of the object to be detected (standard target and/or flat surface) should be taken into account. In the case of inductive proximity switches, a correction fac-tor is stated which evaluates the reduction of the switching distance in relation to the different materials that the object is made from. This factor depends on the type, characteristics (internal structure), size and geometry of the material that the object to be detected is made from. The stated switching distance value relates to steel St37 (factor 1 steel). In order to

assess the approximate switching distance for materials which differ from this, the value has to be multiplied by the approp-riate correction factor. In order to ensure that the device runs reliably, it is essential that the installation conditions on this data sheet are adhered to.Examples for the areas of application in which these inductive proximity switches are used include among others: mecha-nical engineering/plant construction, automotive industry, warehouse and materials handling equipment, packaging industry, printing and paper industries, chemical and process engineering.

application examplesuinspection of die-cut metal parts of various sizes through various switching distancesuintegration, even in machine parts with very limited available space udetection of metallic objects in aggressive media through Teflon protective walludetection of objects through the walls of non-metallic containers and tubes

INDUCTIVE SENSORSNORM SWITCHING DISTANCES, INCREASED SWITCHING DISTANCES 2600

6


TECHNICAL DATA switching distance (Sn) 0.8mm 0.8mm mounting flush flush output signal pnp, no pnp, no

operating voltage 10 … 30V DC 10 … 30V DC current consumption (w/o load) ≤ 13mA ≤ 10mA output current (max. load) 200mA 200mA voltage drop (max. load) 2.0V DC 2.0V DC hysteresis < 5% < 10% switching frequency 3kHz 5kHz

display (signal) yellow LED yellow LED short-circuit protection + + reverse polarity protection + +dimensions 5x25x5mm 5x25x5mm housing material nickel-plated brass chrome-plated brassmaterial (front cap) PA 6.6 polyesteroperating temperature -25 … +70°C -25 … +70°C degree of protection (EN 60529) IP67 IP67

connection 2m PUR cable, 3-wire M8-cable connector, 3-pinconnection accessories - e.g. VK200075

article-no. IBQ50104 IBQ50174 switching distance 0.8mm 0.8mm mounting flush flush connection 2m PUR cable M8 cable connector

M8-connector with 150mm PUR-line

INDUCTIVE SENSORS2600 NORM SWITCHING DISTANCES, INCREASED SWITCHING DISTANCES


article-no. IB090100 IB090170 IB090174 switching distance 1.5mm 1.5mm 2.0mm mounting flush flush flush connection 2m PVC-cable M8-connector M8-connector

TECHNICAL DATA switching distance (Sn) 1.5mm 1.5mm 2.0mm mounting flush flush flush output signal pnp, no pnp, no pnp, no

operating voltage 10 … 30V DC 10 … 30V DC 10 … 30V DC current consumption (w/o load) ≤ 13mA ≤ 13mA ≤ 12mAoutput current (max. load) 200mA 200mA 200mA voltage drop (max. load) 2.0V DC 2.4V DC 2.0V DC hysteresis ≤ 15% ≤ 15% 3 …20% switching frequency 5kHz 1kHz 5kHz

display (signal) yellow LED yellow LED red LED short-circuit protection + + + reverse polarity protection + + +

dimensions 8x40x8mm 8x59x8mm 8x35.5x8mm housing material nickel-plated brass nickel-plated brass nickel-plated brassmaterial (front cap) PA PA PBToperating temperature -25 … +70°C -25 … +70°C -25 … +75°C degree of protection (EN 60529) IP67 IP67 IP67

connection 2m PVC-cable, 3-wire M8-connector, 3-pin M8-connector, 3-pinconnection accessories - e.g. VK200075 e.g. VK200075


6


TECHNICAL DATA switching distance (Sn) 2.0mm 2.0mm 3.0mm 3.0mm mounting flush flush semi-flush semi-flush output signal pnp, no pnp, no pnp, no pnp, no

operating voltage 10 … 30V DC 10 … 30V DC 10 … 30V DC 10 … 30V DCcurrent consumption (w/o load) ≤ 12mA ≤ 12mA ≤ 10mA ≤ 10mAoutput current (max. load) 200mA 200mA 200mA 200mA voltage drop (max. load) 2.0V DC 2.0V DC 2.0V DC 2.0V DChysteresis 3 … 20% 3 … 20% < 10% < 10%switching frequency 5kHz 5kHz 1kHz 1kHz

display (signal) red LED red LED yellow LED yellow LEDshort-circuit protection + + + +reverse polarity protection + + + +

dimensions 8x20x8mm 8x49x8mm 8x40x8mm 8x59x8mmhousing material nickel-plated zinc diecast nickel-plated brass chrome-plated zinc diecast chrome-plated zinc diecastmaterial (front cap) PBT PBT PBTP PBTPoperating temperature -25 … +75°C -25 … +75°C -25 … +70°C -25 … +70°Cdegree of protection (EN 60529) IP67 IP67 IP67 IP67

connection 2m PVC-cable, 3-wire M8-connector, 3-pin 2m PVC-cable, 3-wire M8-connector, 3-pinconnection accessories - e.g. VK200075 - e.g. VK200075

article-no. IB090104 IB090175 IB090106 IB090176 switching distance 2.0mm 2.0mm 3.0mm 3.0mm mounting flush flush semi-flush semi-flushconnection 2m PVC-cable M8-connector 2m PVC-cable M8-connector



TECHNICAL DATA switching distance (Sn) 4mm 4mm mounting flush flush output signal pnp, no pnp, no

operating voltage 10 … 30V DC 10 … 30V DC current consumption (w/o load) ≤ 13mA ≤ 13mA output current (max. load) 200mA 200mA voltage drop (max. load) 2.4V DC 2.4V DC hysteresis 15% 15%switching frequency 800Hz 800Hz


dimensions 12x55x12mm 12x65x12mm housing material nickel-plated brass nickel-plated brassoperating temperature -25 … +70°C -25 … +70°C degree of protection (EN 60529) IP67 IP67

connection 2m PVC-cable, 3-wire M8-connector, 3-pinconnection accessories - e.g. VK200075

article-no. IB130100 IB130170 switching distance 4.0mm 4.0mm mounting flush flush connection 2m PVC-cable M8-connector


6






connection



mounting parameters correction factors

IBQ5… flush mounting IBQ5…

material factor

steel 1.0stainless steel (V2A) 0.85brass (Ms) 0.7aluminum (Al) 0.6copper (Cu) 0.6

IB09… flush mounting IB09…

IB090106 and IB090176 semi-flush mounting IB090106 and IB090176

IB13… flush mounting IB13…

material factor


material factor


material factor




P robust plastic housing

P LED display

P static or dynamic switching output

P dynamic pulse stretching 100msec

P connection with M8-connector or M12-cable connector

dimensions 19 x 78.5 x 9mm non-flush static switching distance 10mmnon-flush dynamic switching distance 16mm

direct mounting on plastic-hoses with cable straps

descriptionThe sensors offer the opportunity of recognizing metallic objects in transparent or non-transparent supply hoses. In relation to this, the sensor can be fastened to the hose with the aid of cable clips.Static embodiments generate an output signal as long as metallic parts are found in the detection range. This is how supply processes, e.g. screw conveying, blockage checks can be achieved.Dynamic sensors are employed if the detection involves par-ticularly small parts with a small mass. If a metallic object is passing the device, a short pulse (can be set to 100msec) is generated at the output. As a condition of this (that only mate-

rial which is moved is detected), metallic abrasion in the hose is suppressed and in these applications as well, the resolution remains intact.For realizing the maximum switching distance, care should be taken in relation to the size and characteristics of the object to be detected (standard target). A free zone of 30mm should be adhered to around the sensor.

application examplesu for use in supply hosesu jam checksu counting tasks

INDUCTIVE SENSORSHOSE SENSORS 2700

6


article-no. IY190120 IY190170 IY190175switching distance (Sn) 16mm 16mm 10mm output signal pnp, no,dynamic pnp, no, dynamic pnp, no, staticconnection M12-cable connector M8-connector M8-connector

TECHNICAL DATAswitching distance (Sn) 16mm 16mm 10mm output signal pnp, no,dynamic pnp, no, dynamic pnp, no, static mounting non-flush non-flush non-flush

operating voltage 10 … 30V DC 10 … 30V DC 10 … 30V DC current consumption (w/o load) ≤ 10mA ≤ 10mA ≤ 10mA output current (max. load) 200mA 200mA 200mA voltage drop (max. load) 2.4V DC 2.4V DC 2.4V DC hysteresis < 15% < 15% < 15% repeat accuracy < 10% < 10% < 10% pulse stretching 100ms 100ms - switching frequency - - 300Hz


dimensions 19x78.5x9mm 19x78.5x9mm 19x78.5x9mm housing material plastic plastic plastic operating temperature -25 … +75°C -25 … +75°C -25 … +75°Cdegree of protection (EN 60529) IP67 IP67 IP67

connection M12-cable connector M8-connector, 3-pin M8-connector, 3-pin 4-pin, 3 assigned, 50mm connection accessories e.g. VK200025 e.g. VK200075 e.g. VK200075





connection

normally open


INDUCTIVE SENSORS2700 HOSE SENSORS


flush

, non

-flus

h

CAPACITIVE SENSORSMETAL, PLASTIC DEVICES 1000

7


CAPACITIVE SENSORS1000 METAL, PLASTIC DEVICES

NOTES


P metal sleeve made of stain. steel; nickel-plated brass or plastic housing

P LED indicator for signal




Switching distance adjustable with potentiometer

descriptionThe function of a capacitive sensor is based on the change of the electric field in the area in front of its active zone. The sen-sor operates with an oscillator. The capacitance between the active electrode and the electric ground potential is measured.As a metallic or non-metallic material enters the active zone of the sensor, the capacitance increases and thereby influences the oscillation amplitude of the oscillator.As a result, the trigger stage downstream of the oscillator flips, thereby causing the switching amplifier in the sensor to change its output status.All sensors are provided with a potentiometer by means of which the desired switching distance can be set. These capaci-tive sensors are used for the detection of objects, for counting

tasks and for all types of filling level monitoring of solid mate-rials (e.g., powder, granulate, pellets, etc.) and liquid materials (e.g., water, oil, hot glue, pastes, acids, etc.).


environmentsu checking the presence of metal parts with various dimensi-


tainers and tubes

dimensions M8 x 1 M12 x 1 M18 x 1 Ø 20 M30 x 1.5 Ø 34 Ø 80 Ø 100 flush switching distance up to 25mmnon-flush switching distance up to 120mm


7


TECHNICAL DATAswitching distance 0.1 … 1.5mm 0.1 … 1.5mm 0.1 … 3.0mm 0.1 … 3.0mmoutput signal pnp, no pnp, no pnp, no pnp, no

operating voltage 11 … 30V DC 11 … 30V DC 11 … 30V DC 11 … 30V DC current consumption (w/o load) ≤ 15mA ≤ 15mA ≤ 15mA ≤ 15mA output current (max. load) 50mA 50mA 50mA 50mA voltage drop (max. load) 2.0V DC 2.0V DC 2.0V DC 2.0V DC hysteresis 5 … 15% 5 … 15% 5 … 15% 5 … 15%switching frequency 100Hz 100Hz 100Hz 100Hzcorrection factors wood, glass approx. 0.6 wood, glass approx. 0.6 wood, glass approx. 0.6 wood, glass approx. 0.6 oil, PVC approx. 0.5 oil, PVC approx. 0.5 oil, PVC approx. 0.5 oil, PVC approx. 0.5

display yellow LED yellow LED yellow LED yellow LEDshort-circuit protection + + + +reverse polarity protection + + + +sensitivity adjustment potentiometer potentiometer potentiometer potentiometer

dimensions M8x1 M8x1 M8x1 M8x1length (thread/complete) 36mm/42mm 42mm/54mm 33mm/42mm 39mm/54mmhousing material stainl. steel stainl. steel stainl. steel stainl. steelmaterial (front cap) PTFE PTFE PTFE PTFE operating temperature -10 … +70°C -10 … +70°C -10 … +70°C -10 … +70°Cdegree of protection (EN 60529) IP65 IP65 IP65 IP65

connection 2m PUR cable, 3-wire M8-connector, 3-pin 2m PUR cable, 3-wire M8-connector, 3-pinconnection accessories - e.g. VK200075 - e.g. VK200075mounting accessories (clip( AY000047 AY000047 AY000047 AY000047mounting accessories (universal holder) AY000115 AY000115 AY000115 AY000115

article-no. KB080100 KB080170 KN080100 KN080170switching distance 0.1 … 1.5mm 0.1 … 1.5mm 0.1 … 3.0mm 0.1 … 3.0mmoutput signal pnp, no pnp, no pnp, no pnp, nomounting flush flush non-flush non-flush connection cable M8-connector cable M8-connector



TECHNICAL DATAswitching distance 0 … 6mm 0 … 6mm 0 … 6mm 0 … 6mmoutput signal pnp, no pnp, no pnp, no/nc pnp, no/nc

operating voltage 10 … 35V DC 10 … 35V DC 10 … 35V DC 10 … 35V DC current consumption (w/o load) ≤ 15mA ≤ 15mA ≤ 15mA ≤ 15mA output current (max. load) 250mA 250mA 2x250mA 2x250mA voltage drop (max. load) 2.0V DC 2.0V DC 2.0V DC 2.0V DC hysteresis 5 … 15% 5 … 15% 5 … 15% 5 … 15%switching frequency 500Hz 500Hz 500Hz 500Hzcorrection factors wood, glass approx. 0.6 wood, glass approx. 0.6 wood, glass approx. 0.6 wood, glass approx. 0.6 oil, PVC approx. 0.5 oil, PVC approx. 0.5 oil, PVC approx. 0.5 oil, PVC approx. 0.5

display (signal) yellow LED yellow LED yellow LED yellow LEDdisplay (operation) green LED - green LED -short-circuit protection + + + +reverse polarity protection + + + +sensitivity adjustment potentiometer potentiometer potentiometer potentiometer


connection 2m PUR cable, 3-wire M12-connector, 3-pin 2m PUR cable, 4-wire M12-connector,4-pinconnection accessories - e.g. VK200025 - e.g. VK200325mounting accessories (clip) AY000049 AY000049 AY000049 AY000049mounting accessories (universal holder) AY000115 AY000115 AY000115 AY000115

article-no. KB120100 KB120120 KB120400 KB120420switching distance 0 … 6mm 0 … 6mm 0 … 6mm 0 … 6mmoutput signal pnp, no pnp, no pnp, no/nc pnp, no/ncmounting flush flush flush flush connection cable M12-connector cable M12-connector


7


TECHNICAL DATAswitching distance 0.5 … 10mm 0.5 … 10mm 0.5 … 10mm 0.5 … 10mmoutput signal pnp, no pnp, no pnp, no/nc pnp, no/nc

operating voltage 10 … 35V DC 10 … 35V DC 10 … 35V DC 10 … 35V DC current consumption (w/o load) ≤ 15mA ≤ 15mA ≤ 15mA ≤ 15mA output current (max. load) 250mA 250mA 2x250mA 2x250mAvoltage drop (max. load) 2.0V DC 2.0V DC 2.0V DC 2.0V DC hysteresis 5 … 15% 5 … 15% 5 … 15% 5 … 15%switching frequency 50Hz 50Hz 50Hz 50Hzcorrection factors wood, glass approx. 0.6 wood, glass approx. 0.6 wood, glass approx. 0.6 wood, glass approx. 0.6 oil, PVC approx. 0.5 oil, PVC approx. 0.5 oil, PVC approx. 0.5 oil, PVC approx. 0.5



connection 2m PUR cable, 3-wire M12-connector, 3-pin 2m PUR cable, 4-wire M12-connector,4-pinconnection accessories - e.g. VK200025 - e.g. VK200325mounting accessories (clip) AY000049 AY000049 AY000049 AY000049mounting accessories (universal holder) AY000115 AY000115 AY000115 AY000115

article-no. KN120100 KN120120 KN120400 KN120420switching distance 0.5 … 10mm 0.5 … 10mm 0.5 … 10mm 0.5 … 10mmoutput signal pnp, no pnp, no pnp, no/nc pnp, no/ncmounting non-flush non-flush non-flush non-flush connection cable M12-connector cable M12-connector






dimensions M18x1 M18x1 M18x1 M18x1length (thread/complete) 55mm/70mm 55mm/84mm 55mm/70mm 55mm/84mmhousing material nickel-plated brass nickel-plated brass nickel-plated brass nickel-plated brassmaterial (front cap) PTFE PTFE PTFE PTFE operating temperature -25 … +70°C -25 … +70°C -25 … +70°C -25 … +70°Cdegree of protection (EN 60529) IP67 IP67 IP67 IP67

connection 2m PUR cable, 3-wire M12-connector, 3-pin 2m PVC-cable, 4-wire M12-connector,4-pinconnection accessories - e.g. VK200025 - e.g. VK200325mounting accessories (clip) AY000051 AY000051 AY000051 AY000051mounting accessories (universal holder) AY000117 AY000117 AY000117 AY000117

article-no. KB180100 KB180120 KB180400 KB180420switching distance 0.5 … 10mm 0.5 … 10mm 0.5 … 10mm 0.5 … 10mmoutput signal pnp, no pnp, no pnp, no/nc pnp, no/ncmounting flush flush flush flush connection cable M12-connector cable M12-connector


7





dimensions M18x1 M18x1 M18x1 M18x1length (thread/complete) 43mm/70mm 43mm/84mm 43mm/70mm 43mm/84mmhousing material nickel-plated brass nickel-plated brass nickel-plated brass nickel-plated brassmaterial (front cap) PTFE PTFE PTFE PTFE operating temperature -25 … +70°C -25 … +70°C -25 … +70°C -25 … +70°Cdegree of protection (EN 60529) IP67 IP67 IP67 IP67

connection 2m PUR cable, 3-wire M12-connector, 3-pin 2m PVC-cable, 4-wire M8-connector,4-pinconnection accessories - e.g. VK200025 - e.g. VK200325mounting accessories (clip) AY000051 AY000051 AY000051 AY000051mounting accessories (universal holder) AY000117 AY000117 AY000117 AY000117

article-no. KN180100 KN180120 KN180400 KN180420switching distance 0.5 … 15mm 0.5 … 15mm 0.5 … 15mm 0.5 … 15mmoutput signal pnp, no pnp, no pnp, no/nc pnp, no/ncmounting non-flush non-flush non-flush non-flush connection cable M12-connector cable M12-connector



TECHNICAL DATAswitching distance 1.0 … 8.0mm 1.0 … 8.0mm 3.5 … 15mm 3.5 … 15mmoutput signal pnp, no AC, no pnp, no pnp, no

operating voltage 10 … 60V DC 20 … 250V AC 10 … 60V DC 10 … 60V DCcurrent consumption (w/o load) ≤ 15mA ≤ 20mA ≤ 15mA ≤ 15mAminimum load current - - 5mA -output current (max. load) 200mA 300mA 400mA 400mAvoltage drop (max. load) 3.0V DC 10.0V AC 3.0V DC 3.0V DChysteresis 5 … 15% 5 … 15% 5 … 15% 5 … 15%switching frequency 25Hz 15Hz 25Hz 25Hzcorrection factors wood, glass approx. 0.6 wood, glass approx. 0.6 wood, glass approx. 0.6 wood, glass approx. 0.6 oil, PVC approx. 0.5 oil, PVC approx. 0.5 oil, PVC approx. 0.5 oil, PVC approx. 0.5

display (signal) yellow LED yellow LED yellow LED yellow LEDdisplay (operation) green LED green LED green LED green LEDshort-circuit protection + - + +reverse polarity protection + + + +sensitivity adjustment potentiometer potentiometer potentiometer potentiometer

dimensions M18x1 M18x1 Ø 20mm Ø 20mmlength (thread/complete) 40mm / 81mm 40mm / 81mm - / 81mm - / 81mmhousing material PBT PBT PBT PBTmaterial (front cap) PA 6.6 PA 6.6 PA 6.6 PA 6.6 operating temperature -25 … +70°C -25 … +70°C -25 … +70°C -25 … +70°Cdegree of protection (EN 60529) IP67 IP67 IP67 IP67 *

connection 2m PVC-cable, 3-wire 2m PVC-cable, 2-wire 2m PVC-cable, 3-wire M8-connector, 4-pinconnection accessories - - - e.g. VK200375mounting accessories (clip) AY000051 AY000051 - -mounting accessories (universal holder) AY000117 AY000117 - -

article-no. KN180107 KN184107 KN200107 KN200177switching distance 1.0 … 8.0mm 1.0 … 8.0mm 3.5 … 15mm 3.5 … 15mmoutput signal pnp, no AC, no pnp, no pnp, nomounting non-flush non-flush non-flush non-flush connection cable cable cable M8-connector


7



operating voltage 10 … 35V DC 10 … 35V DC 10 … 35V DC 10 … 35V DC current consumption (w/o load) ≤ 15mA ≤ 15mA ≤ 15mA ≤ 15mA output current (max. load) 250mA 250mA 2x250mA 2x250mAvoltage drop (max. load) 2.0V DC 2.0V DC 2.0V DC 2.0V DC hysteresis 5 … 15% 5 … 15% 5 … 15% 5 … 15%switching frequency 200Hz 200Hz 200Hz 200Hzcorrection factors wood, glass approx. 0.6 wood, glass approx. 0.6 wood, glass approx. 0.6 wood, glass approx. 0.6 oil, PVC approx. 0.5 oil, PVC approx. 0.5 oil, PVC approx. 0.5 oil, PVC approx. 0.5

display (signal) yellow LED yellow LED yellow LED yellow LEDdisplay (operation) green LED green LED green LED green LEDshort-circuit protection + + + +reverse polarity protection + + + +sensitivity adjustment potentiometer potentiometer potentiometer potentiometer

dimensions M30x1.5 M30x1.5 M30x1.5 M30x1.5length (thread/complete) 55mm/70mm 55mm/82mm 55mm/70mm 55mm/82mmhousing material nickel-plated brass nickel-plated brass nickel-plated brass nickel-plated brassmaterial (front cap) PTFE PTFE PTFE PTFE operating temperature -25 … +70°C -25 … +70°C -25 … +70°C -25 … +70°Cdegree of protection (EN 60529) IP67 IP67 IP67 IP67

connection 2m PVC-cable, 3-wire M12-connector, 3-pin 2m PVC-cable, 4-wire M12-connector, 4-pinconnection accessories - e.g. VK200025 - e.g. VK200325mounting accessories (clip) AY000061 AY000061 AY000061 AY000061

article-no. KB300100 KB300120 KB300400 KB300420switching distance 0.5 … 25mm 0.5 … 25mm 0.5 … 25mm 0.5 … 25mmoutput signal pnp, no pnp, no pnp, no/nc pnp, no/ncmounting flush flush flush flush connection cable M12-connector cable M12-connector




operating voltage 20 … 250V AC 10 … 35V DC 10 … 35V DC 10 … 35V DC current consumption (w/o load) ≤ 15mA ≤ 15mA ≤ 15mA ≤ 15mA minimum load current 5mA - - -output current (max. load) 400mA 400mA 2x250mA 2x250mA voltage drop (max. load) 2.0V DC 2.0V DC 2.0V DC 2.0V DC hysteresis 5 … 15% 5 … 15% 5 … 15% 5 … 15%switching frequency 15Hz 50Hz 50Hz 50Hzcorrection factors wood, glass approx. 0.6 wood, glass approx. 0.6 wood, glass approx. 0.6 wood, glass approx. 0.6 oil, PVC approx. 0.5 oil, PVC approx. 0.5 oil, PVC approx. 0.5 oil, PVC approx. 0.5

display (signal) yellow LED yellow LED yellow LED yellow LEDdisplay (operation) - green LED green LED green LEDshort-circuit protection 3A/10ms + + +reverse polarity protection + + + +sensitivity adjustment potentiometer potentiometer potentiometer potentiometer

dimensions M30x1.5 M30x1.5 M30x1.5 M30x1.5length (thread/complete) 60mm/80mm 40mm/70mm 40mm/70mm 40mm/82mmhousing material nickel-plated brass nickel-plated brass nickel-plated brass nickel-plated brassmaterial (front cap) PPO PTFE PTFE PTFE operating temperature -25 … +70°C -25 … +70°C -25 … +70°C -25 … +70°Cdegree of protection (EN 60529) IP67 IP67 IP67 IP67

connection 2m PVC-cable, 3-wire 2m PVC-cable, 3-wire 2m PVC-cable, 4-wire M12-connector, 4-pinconnection accessories - - - e.g. VK200325mounting accessories (clip) AY000061 AY000061 AY000061 AY000061

article-no. KB304100 KN300100 KN300400 KN300420 switching distance 3.0 … 15mm 1.0 … 30mm 1.0 … 30mm 1.0 … 30mm output signal AC, no pnp, no pnp, no/nc pnp, no/ncmounting flush non-flush non-flush non-flush connection cable cable cable M12-connector


7


TECHNICAL DATAswitching distance 3.0 … 20mm 5.0 … 20mm 5.0 … 20mm 5.0 … 20mmoutput signal pnp, no pnp, no pnp, no/nc AC, no

operating voltage 20 … 250V AC 10 … 60V DC 10 … 60V DC 20 … 250V AC current consumption (w/o load) ≤ 2.5A ≤ 20mA ≤ 20mA ≤ 15mA minimum load current 5mA - - 5mAoutput current (max. load) 400mA 400mA 400mA 300mA voltage drop (max. load) 10.0V AC 3.0V DC 3.0V DC 10.0V AC hysteresis 5 … 15% 5 … 15% 5 … 15% 5 … 15%switching frequency 25Hz 25Hz 25Hz 15Hzcorrection factors wood, glass approx. 0.6 wood, glass approx. 0.6 wood, glass approx. 0.6 wood, glass approx. 0.6 oil, PVC approx. 0.5 oil, PVC approx. 0.5 oil, PVC approx. 0.5 oil, PVC approx. 0.5

display (signal) yellow LED yellow LED yellow LED yellow LEDdisplay (operation) green LED green LED green LED green LEDshort-circuit protection 3A/10ms + + -reverse polarity protection + + + +sensitivity adjustment potentiometer potentiometer potentiometer potentiometer

dimensions M30x1.5 M30x1.5 M30x1.5 M30x1.5length (thread/complete) 60mm/90mm 40mm/81mm 40mm/81mm 40mm/81mmhousing material nickel-plated brass PBT PBT PBTmaterial (front cap) PPO PA 6.6 PA 6.6 PA 6.6 operating temperature -25 … +70°C -25 … +70°C -25 … +70°C -25 … +70°Cdegree of protection (EN 60529) IP67 IP67 IP67 * IP67

connection 2m PVC-cable, 3-wire 2m PVC-cable, 3-wire M12-connector, 3-pin 2m PVC-cable, 2-wireconnection accessories - - e.g. VK200025 -mounting accessories (clip) AY000061 AY000061 AY000061 AY000061

article-no. KN304100 KN300107 KN300127 KN304107switching distance 3.0 … 20mm 5.0 … 20mm 5.0 … 20mm 5.0 … 20mmoutput signal AC, no pnp, no pnp, no AC, nomounting non-flush non-flush non-flush non-flush connection cable cable M12-connector cable

* only with screwed-on cable socket



article-no. KN340107 KN340127 KN344107 switching distance 6.0 … 30mm 6.0 … 30mm 6.0 … 30mm output signal pnp, no pnp, no AC, nomounting non-flush non-flush non-flush connection cable M12-connector cable

TECHNICAL DATAswitching distance 6.0 … 30mm 6.0 … 30mm 6.0 … 30mm output signal pnp, no pnp, no AC, no

operating voltage 10 … 60V DC 10 … 60V DC 20 … 250V AC current consumption (w/o load) ≤ 20mA ≤ 20mA ≤ 15mAminimum load current - - 5mA output current (max. load) 400mA 400mA 30mA voltage drop (max. load) 3.0V DC 3.0V DC 10.0V AC hysteresis 5 … 15% 5 … 15% 5 … 15% switching frequency 25Hz 25Hz 15Hz correction factors wood, glass approx. 0.6 wood, glass approx. 0.6 wood, glass approx. 0.6 oil, PVC approx. 0.5 oil, PVC approx. 0.5 oil, PVC approx. 0.5

display (signal) yellow LED yellow LED yellow LEDdisplay (operation) green LED green LED green LED short-circuit protection + + -reverse polarity protection + + +sensitivity adjustment potentiometer potentiometer potentiometer

dimensions Ø 34mm Ø 34mm Ø 34mm length (thread/complete) - / 81mm - / 81mm - / 81mm housing material PBT PBT PBT material (front cap) PA 6.6 PA 6.6 PA 6.6 operating temperature -25 … +70°C -25 … +70°C -25 … +70°C degree of protection (EN 60529) IP67 IP67 * IP67

connection 2m PVC-cable, 3-wire M12-connector, 3-pin 2m PVC-cable, 2-wireconnection accessories - e.g. VK200025 -mounting accessories (clip) - - -


7


TECHNICAL DATAswitching distance 1.0 … 70mm 1.0 … 70mm 1.0 … 120mm 1.0 … 120mmoutput signal pnp, no AC, no pnp, no AC, no

operating voltage 10 … 55V DC 20 … 250V AC 10 … 55V DC 20 … 250V DC current consumption (w/o load) ≤ 4.0mA ≤ 2.5mA ≤ 4.0mA ≤ 2.5mAminimum load current - 5mA - 5mA output current (max. load) 400mA 400mA 400mA 400mAvoltage drop (max. load) 1.5V DC 10.0V AC 1.5V DC 10.0V AC hysteresis 5 … 15% 5 … 15% 5 … 15% 5 … 15%switching frequency 10Hz 10Hz 10Hz 10Hzcorrection factors wood, glass approx. 0.6 wood, glass approx. 0.6 wood, glass approx. 0.6 wood, glass approx. 0.6 oil, PVC approx. 0.5 oil, PVC approx. 0.5 oil, PVC approx. 0.5 oil, PVC approx. 0.5

display (signal) yellow LED yellow LED yellow LED yellow LEDshort-circuit protection + 3A/10ms + 3A/10msreverse polarity protection + + + +

dimensions Ø 80mm Ø 80mm Ø 100mm Ø 100mmlength (thread/complete) -/40mm -/40mm -/40mm -/40mmhousing material PBT PBT PBT PBTmaterial (front cap) PBT PBT PBT PBT operating temperature -25 … +70°C -25 … +70°C -25 … +70°C -25 … +70°Cdegree of protection (EN 60529) IP67 IP67 IP67 IP67

connection 2m PVC-cable, 3-wire 2m PVC-cable, 2-wire 2m PVC-cable, 3-wire 2m PVC-cable, 2-wireconnection accessories - - - -mounting accessories (clip) - - - -

article-no. KN800100 KN804100 KN830100 KN834100switching distance 1.0 … 70mm 1.0 … 70mm 1.0 … 120mm 1.0 … 120mmoutput signal pnp, no AC, no pnp, no AC, nomounting non-flush non-flush non-flush non-flush connection cable cable cable cable



ACCESSORIESarticle-no. description diameter material

AY000088 base module* flanges: stainless steel, ball pins: galvanized steelAY000115 mounting kit for M5, M8, M12 sensors stainless steelAY000117 mounting kit for M18 sensors stainless steel

AY000047 quick clip 8mm PA6 / galvanized steelAY000048 quick clip with positive stop 8mm PA6 / galvanized steelAY000049 quick clip 12mm PA6 / galvanized steelAY000050 quick clip with positive stop 12mm PA6 / galvanized steelAY000051 quick clip 18mm PA6 / galvanized steelAY000052 quick clip with positive stop 18mm PA6 / galvanized steelAY000061 quick clip 30mm PA6 / galvanized steelAY000062 quick clip with positive stop 30mm PA6 / galvanized steelAY000053 straight base for quick clip 12mm, 18mm PA6 / galvanized steel AY000054 angular base for quick clip 12mm, 18mm PA6 / galvanized steelAY000055 quick clip label 12 … 30mm plastic / -AY000057 box set with selection of quick clips 4 … 18mm plastic / -

The AY000088 base module is contained in every mounting kitMaterial of bolts and nuts: galvanized steel

connection

PNP, no PNP, no/nc

wire colors: bn = brown (1), white = (wh), bu = blue (3), bk = black (4)

AC, no

universal mounting AY000115 / AY000117consisting of base module … and fitting panel





7



NOTES


P metal sleeve made of stainl. steel

P LED display





very small, M5x0.5mmtemperature up to +130°C

descriptionThese magnetic sensors are used for contactless and wear-free position detection in control technology. They are used everywhere inductive proximity switches are pushed to their limits. Compared to inductive sensors, they offer a much larger switching distance.Even the smallest version M5x0.5 features a switching distance of 40mm to the AM000009 magnets. With appropriate mag-nets, even larger switching distances can be realized.The object to be detected must be provided with a magnet, as the sensors only respond to magnets. Because magnetic fields penetrate all non-magnetizable materials, the sensors are able to detect magnets through, e.g., walls made of non-ferrous metal, stainless steel, aluminum, plastic or wood.The MC120125 offers the possibility to set the magnetic sen-

sitivity in a range from 1.5mT to 10mT.The setting is performed by applying a positive voltage for at least 1 second on PIN2 of the M12-connector. This is indicated by the flashing of the LED in the sensor.When the programming voltage is switched off, the current measured value is stored. The sensor switches if the magnetic field is greater than or equal to the „taught“ value.

application examplesu position recognition from the outside through stainless

steel tubesu speed sensing with rotating shaftsu position sensing on chain guidesu sensing of door positions

dimensions M5x0.5 M8x1 M12x1 flush switching distance 40mm

MAGNETIC SENSORSPROXIMITY SWITCHES 1000

8


TECHNICAL DATAswitching distance * 40mm 40mm 40mm 40mmoutput signal pnp, no pnp, no pnp, no pnp, no

operating voltage 8 … 30V DC 8 … 30V DC 8 … 30V DC 8 … 30V DCcurrent consumption (w/o load) ≤ 20mA ≤ 20mA ≤ 20mA ≤ 20mAoutput current (max. load) 150mA 150mA 200mA 200mAvoltage drop (max. load) 2.0V DC 2.0V DC 2.0V DC 2.0V DChysteresis 5 … 15% 5 … 15% 5 … 15% 5 … 15%switching frequency 1kHz 1kHz 1kHz 1kHz


housing material stainl. steel stainl. steel stainl. steel stainl. steeldimensions M5x0.5 M5x0.5 M8x1 M8x1length (thread/complete) 14.5mm/14.5mm 14.5mm/14.5mm 45mm/52mm 45mm/59mmoperating temperature -25 … +70°C -25 … +70°C -25 … +70°C -25 … +70°Cdegree of protection (EN 60529) IP67 IP67 IP67 IP67

connection M8-cable connector, 3-pin 2m PUR cable, 3-wire 2m PUR cable, 3-wire M8-connector, 3-pinconnection accessories e.g. VK200075 - - e.g. VK200075mounting accessories (universal holder) AY000115 AY000115 AY000115 AY000115mounting accessories (clip) AY000045 AY000045 AY000047 AY000047

* with respect to magnets AM000009

article-no. MC050176 MC0501A6 MC080100 MC080170version - - - -output signal pnp, no pnp, no pnp, no pnp, noconnection cable connector cable cable M8-connectoroperating temperature -25 … +70°C -25 … +70°C -25 … +70°C -25 … +70°C

MAGNETIC SENSORS1000 PROXIMITY SWITCHES


article-no. MC120100 MC120120 MC120125 MC120155version - - teach-in -output signal pnp, no pnp, no pnp, no pnp, noconnection cable M12-connector M12-connector cableoperating temperature -25 … +70°C -25 … +70°C -25 … +70°C -25 … +130°C

article-no. MC120200 MC120420 - -output signal pnp, nc pnp, no/nc - -connection cable M12-connector - -operating temperature -25 … +70°C -25 … +70°C - -

TECHNICAL DATAswitching distance * 40mm 40mm 40mm 40mmoutput signal see above see above pnp, no pnp, no

operating voltage 8 … 30V DC 8 … 30V DC 10 … 30V DC 18 … 30V DCcurrent consumption (w/o load) ≤ 20mA ≤ 20mA ≤ 20mA ≤ 20mAoutput current (max. load) 200mA 200mA 200mA 100mAvoltage drop (max. load) 2.0V DC 2.0V DC 2.0V DC 2.0V DChysteresis 5 … 15% 5 … 15% 5 … 15% 5 … 15%switching frequency 1kHz 1kHz 1kHz 1kHz


housing material stainl. steel stainl. steel stainl. steel stainl. steeldimensions M12x1 M12x1 M12x1 M12x1length (thread/complete) 55mm/69mm 45mm/72mm 45mm/72mm 55mm/69mmoperating temperature -25 … +70°C -25 … +70°C -25 … +70°C -25 … +130°Cdegree of protection (EN 60529) IP67 IP67 IP67 IP67

connection 2m PUR cable, 3-wire M12-connector, 3-/4-pin M12-connector, 4-pin 2m silicone cable, 3-wireconnection accessories - e.g. VK200025 e.g. VK200325 - e.g. VK200325mounting accessories (universal holder) AY000115 AY000115 AY000115 AY000115mounting accessories (clip) AY000049 AY000049 AY000049 AY000049

* with respect to magnets AM000009

MAGNETIC SENSORSPROXIMITY SWITCHES 1000

8


ACCESSORIES

ARTICLE-NO. description dimensions note

AY000088 base module * flanges: stainless steel, ball pins: galvanized steelAY000115 mounting kit for M5, M8, M12 sensors stainless steel

AY000045 quick clip Ø 5mm PA6 / galvanized steel boltsAY000047 quick clip Ø 8mm PA6 / galvanized steel boltsAY000048 quick clip with positive stop Ø 8mm PA6 / galvanized steel boltsAY000049 quick clip Ø 12mm PA6 / galvanized steel boltsAY000050 quick clip with positive stop Ø 12mm PA6 / galvanized steel bolts

AM000001 magnet, barium ferrite 20 round / length 6.5mm bore 4.3 mmAM000002 magnet, barium ferrite 30 round / length 15mm bore 5.6 mmAM000009 magnet, barium ferrite 30 round / length 10mm can be fastened with adhesiveAM000010 magnet, plastic cover 35 round / length 17mm bore 5.6 mmAM000020 magnet, Neodelta 10 round / length 3mm can be fastened with adhesive



connection

M5, M8, M12 cable device M12 connector device, teach-in

universal mounting AY000115consisting of base module … and fitting panel





MAGNETIC SENSORS1000 PROXIMITY SWITCHES


NotesAutomated machines often require feedback on the position of pneumatic cylinders. Reed switches are often used for this purpose. Under certain conditions, e.g. high vibration, high switching frequencies, or where very precise switch positi-oning is required, reed switches have severe limitations. In addition, they are not short-circuit proof and can-not handle high levels of inductive load. These factors coupled with mechanical wear of the switch contacts can make reed switches unreliable. These weaknesses have resulted in a demand from industrial users for a sensor that will guarantee trouble free opera-tion, avoiding machine down time and the consequential loss of production. As reliable alternative ipf electronic have engineered a range of electronic cylinder sensors based on the design of inductive proximity sensors. This “wear-free” mode of operation guarantees operational safety and reliability. The electronic cylinder sensors have been designed to fit cylinders from all major manufacturers and are directly interchangeable with reed switches using the same 3-wire technology.

Selection table for magnetic cylinder sensors Cylinders Cylinder sensors Mounting possibilities / Examples

Short stroke cylinder with round groove MZR4 Direct mounting

Profiled cylinder MZR9 Clamp AM000021

Round clinder MZ13 Strap retainer Clamp AM000004 AM000005

Dovetailed cylinder MZ15 Direct mounting

Pull-rod cylinder MZ31, MZ38, MZ41 Direct mounting

Round clinder MZR9 Mounting clip AM000015

MAGNETIC SENSORSOVERVIEW CYLINDER SENSORS 1100

sensorstrap retainer

cylinder tube

sensorclamp

cylinder tube

8


Selection table for magnetic cylinder sensors MZ07 Cylinders Insertable cylinder sensors Mounting possibilities / Examples

Note: the article numbers given for mounting clips, fastening clamps and strap retainers are just examples. Please refer to the following data sheets to establish the exact article numbers of these fixing options for your size of cylinder.

Round cylinder AM000040

Profiled cylinder AM000073

Pull-rod cylinder AM000070

Dovetailed cylinder AM000036

T-groove cylinder direct mounting

T-groove cylinder direct mounting

T-groove cylinder Direct mounting

MZR4 with mounting holder fits on all T-groove cylinders

MAGNETIC SENSORS1100 OVERVIEW CYLINDER SENSORS

MZA70175


P temperature range up to +130°C

P wear-free and impact-resistant since fully electronic


P high locking power

P fast mounting

P very short design

P LED display, except for the +130°C version

P connection via cable, M8-connector, M8- or M12-cable connector

dimensions 10 x 16 x 19.5mm Ø 3.6 x 20.5mm Ø 4.0 x 20.5mm

C-groove cylinders sensor surface middle area

cylinder sensors for 4mm round groo-ve for Festo or SMC cylinders

descriptionFor many tasks in automation technology, it is necessary to detect movements in pneumatic and hydraulic cylinders and to precisely detect the position of the piston. Here, magnetic cylinder sensors are used.The electronic cylinder sensors of the MZR4 series are used for contactless and wear-free position detection in control technology. They offer a large switching distance yet still have a small design.Because magnetic fields penetrate all non-magnetizable mate-rials, the cylinder magnets are detected through walls made of non-ferrous metal, stainless steel and aluminum.The electronic cylinder sensors can be used on all cylinders

from leading manufacturers and are directly interchangeable with reed switches that use three-wire system technology.Through the absolute wear-free mode of operation, they ensu-re maximum operational dependability and reliability.To retain the same position when replacing a cylinder switch, the locking stop AM000111 is available as an accessory.

application examplesuposition detection of a cylinder pistonuend position sensing

MAGNETIC SENSORSCYLINDER SENSORS 1200

8


article-no. MZR40175version for Festo cylinders operating temperature -25 … +70°Cconnection M8-connector

TECHNICAL DATAsensor surface (active) middle area output signal pnp, no

operating voltage 10 … 30V DC current consumption (w/o load) ≤ 15mA output current (max. load) 200mA voltage drop (max. load) 2.0V DC hysteresis typ. 1mm repeatability ±0.1mm switching frequency 1kHz

display (signal) yellow LED short-circuit protection + reverse polarity protection +

housing material zinc diecast dimensions 10x16x19.5mm operating temperature -25 … +70°C degree of protection (EN 60529) IP67

connection M8-connector, 3-pin connection accessories e.g. VK200075 mounting accessories -

MAGNETIC SENSORS1200 CYLINDER SENSORS


TECHNICAL DATAsensor surface (active) middle area middle area output signal pnp, no pnp, no

operating voltage 10 … 30V DC 10 … 30V DC current consumption (w/o load) ≤ 15mA ≤ 15mA output current (max. load) 150mA 150mA voltage drop (max. load) 2.0V DC 2.0V DC hysteresis typ. 1mm typ. 1mm repeatability ±0.1mm ±0.1mm switching frequency 1kHz 1kHz

display (signal) - yellow LED short-circuit protection + + reverse polarity protection + +

housing material zinc diecast stainl. steel dimensions Ø 3.6x20.5mm Ø 3.6x20.5mm operating temperature -25 … +130°C -25 … +70°C degree of protection (EN 60529) IP67 IP67

connection M8-cable connector, teflon, 3-pin 2m cable, PUR, 3-wire connection accessories e.g. VK200075 -mounting accessories AM000081 adapter, AM000111 positive stop AM000081 adapter, AM000111 positive stopNote: The output stage is located in the connector!

article-no. MZR40158 MZR401A8version for Festo cylinders for Festo cylindersoperating temperature -25 … +130°C -25 … +70°Cconnection M8-cable connector, teflon, 300mm 2m cable


8


TECHNICAL DATAsensor surface (active) middle area middle area output signal pnp, no pnp, no



housing material stainl. steel stainl. steel dimensions Ø 3.6x20.5mm Ø 3.6x20.5mm operating temperature -25 … +70°C -25 … +70°C degree of protection (EN 60529) IP67 IP67

connection M12-cable connector, PUR, 3-pin M8-cable connector, PUR, 3-pinconnection accessories e.g. VK200025 e.g. VK200075 mounting accessories AM000081 adapter, AM000111 positive stop AM000081 adapter, AM000111 positive stop

article-no. MZR40128 MZR40178version for Festo cylinders for Festo cylindersoperating temperature -25 … +70°C -25 … +70°Cconnection M12-cable connector, PUR, 300mm M8-cable connector, PUR, 300mm

article-no. MZR401E8 MZR401F8version for Festo cylinders for Festo cylinders operating temperature -25 … +70°C -25 … +70°C connection M12-cable connector, PUR, 600mm M8-cable connector, PUR, 600mm

article-no. - MZR401K8version - for Festo cylinders operating temperature - -25 … +70°C connection - M8-cable connector, PUR, 1000mm

preferred types are shown in bold!



article-no. MZR401A9 MZR40129 MZR40179version for SMC cylinders for SMC cylinders for SMC cylinders operating temperature -25 … +70°C -25 … +70°C -25 … +70°C connection 2m PUR cable M12-cable connector, 300mm M8-cable connector, 300mm

article-no. - MZR401E9 MZR401F9version - for SMC cylinders for SMC cylinders operating temperature - -25 … +70°C -25 … +70°C connection - M12-cable connector, 600mm M8-cable connector, 600mm


TECHNICAL DATA sensor surface (active) middle area middle area middle area output signal pnp, no pnp, no pnp, no

operating voltage 10 … 30V DC 10 … 30V DC 10 … 30V DC current consumption (w/o load) ≤ 10mA ≤ 10mA ≤ 10mA output current (max. load) 150mA 150mA 150mA voltage drop (max. load) 2.0V DC 2.0V DC 2.0V DC hysteresis typ. 1mm typ. 1mm typ. 1mm repeatability ±0.1mm ±0.1mm ±0.1mm switching frequency 1kHz 1kHz 1kHz


housing material stainl. steel stainl. steel stainl. steel dimensions Ø 4.0x20.5mm Ø 4.0x20.5mm Ø 4.0x20.5mm operating temperature -25 … +70°C -25 … +70°C -25 … +70°C degree of protection (EN 60529) IP67 IP67 IP67

connection 2m PUR cable, 3-wire M12-cable connector, PUR, 3-pin M8-cable connector, PUR, 3-pinconnection accessories - e.g. VK200025 e.g. VK200075 mounting accessories AM000111 positive stop AM000111 positive stop AM000111 positive stop


8



AM000081 adapter for T-groove aluminumAM000111 positive stop for C-groove stainl. steel

connection


wire colors: bn = brown (1), bu = blue (3), bk = black (4) cable connector with rotatable outside thread


AM000081 adapter AM000111 positive stop






P easy mounting

P high switching accuracy with small hysteresis


P high switching frequency

P LED display


P robust metal housing (vibration-resistant)

electronic microsensorimpact-resistant and wear-free

descriptionOn automatic machines, there is often the requirement that a switching signal must be received at certain piston positions of a pneumatic cylinder. Here, magnetic cylinder sensors are used.These magnetic sensors are used for contactless and wear-free position detection in control technology. Magnetic cylinder sensors offer a high switching distance yet still have a small design.Because magnetic fields penetrate all non-magnetizable mate-rials, the sensors are able to detect magnets through non-fer-rous metal, stainless steel or aluminum.

The electronic cylinder sensors can be used on all cylinders from leading manufacturers (Bosch, Festo, Norgren Martonair, Numatics) and are directly interchangeable with reed switches that use three-wire system technology.To retain the same position when replacing a cylinder switch, the locking stop AM000076 is available as an accessory.

application examplesu position detection of a cylinder pistonu end position sensing

dimensions 6.2 x 6.3 x 30mm 10.1 x 22 x 23mm 9.6 x 16 x 22mm

T-groove sensor surface edge area middle area


8


article-no. MZ0701A4 MZ070174 MZ070124 connection 2m PUR cable 0.3m M8-cable connector 0.3m M12-cable connector

article-no. - MZ0701F4 MZ0701E4connection - 0.6m M8-cable connector 0.6m M12-cable connector

article-no. - MZ0701K4 -connection - 1.0m M8-cable connector -

article-no. - - MZ0701U4connection - - 2.0m M12-cable connector

TECHNICAL DATA sensor surface (active) edge area edge area middle area output signal pnp, no pnp, no pnp, no

operating voltage 10 … 30V DC 10 … 30V DC 10 … 30V DC current consumption (w/o load) ≤ 15mA ≤ 15mA ≤ 15mA output current (max. load) 150mA 150mA 150mA voltage drop (max. load) 2.0V DC 2.0V DC 2.0V DC switching hysteresis typ. 1mm typ. 1mm typ. 1mm repeatability ±0.1mm ±0.1mm ±0.1mm switching frequency 1kHz 1kHz 1kHz


housing material zinc diecast zinc diecast zinc diecast dimensions 6.2x6.3x30mm 6.2x6.3x30mm 6.2x6.3x30mm operating temperature -25 … +75°C -25 … +75°C -25 … +75°C degree of protection (EN 60529) IP67 IP67 IP67

connection 2m PUR cable, 3-wire M8-cable connector, 3-pin M12-cable connector, 3-pinconnection accessories - e.g. VK200075 e.g. VK200025mounting accessories AM000076 AM000076 AM000076



TECHNICAL DATAsensor surface (active) edge area edge area output signal pnp, no pnp, no



housing material aluminum zinc diecast dimensions 10.1x22x23mm 9.6x16x22mm operating temperature -25 … +75°C -25 … +75°C degree of protection (EN 60529) IP67 IP67

connection M12-connector, 3-pin M8-connector, 3-pin connection accessories e.g. VK200025 e.g. VK200075mounting accessories AM000076 AM000076

article-no. MZ070125 MZ070175 connection M12-connector M8-connector


8



AM000076 positive stop for T-groove zinc

connection

cable-connector device

mounting AM000076 positive stop


wire colors: 1 L+ br brown 4 pnp/no bl black 3 L- bl blue






P fully electronic microsensor

P robust metal housing (oscillation-resistant)


P fast mounting

P very short design with built-in amplifier

P LED display (except for +130°C version)

P connection via M8-, M12-connector or cable

PversionwithPURortefloncable

dimensions 5 x 4.6 x 18mm 5 x 6.5 x 27mm 10.2 x 16 x 25mm

T-groove cylinders sensor surface middle area

insertable from above temperature range up to +130°C

descriptionFor many tasks in automation technology, it is necessary to detect movements in pneumatic cylinders and to precisely detect the position of the piston. Available for selection are both fully electronic sensors as well as reed sensors.Under certain operating conditions, e.g., in the case of strong vibrations, high switching frequencies and high requirements for exact switching points, reed switches have application limits. The lack of short-circuit protection, the high sensitivity in the event of inductive voltage spikes and, in particular, the mechanical wear of the switching contacts are frequent causes of problems in practical use.Due to these shortcomings, industry demanded sensors that guarantee long-term and fault-free operation and thereby avoid machine stoppages and the associated pro-duction losses.

For this purpose, ipf electronic gmbh offers magnetic cylinder sensors that are used for the position detection of the piston position in pneumatic cylinders. Through the absolute wear-free mode of operation, they ensure maximum operational dependability and reliability.The electronic cylinder sensors can be used on all cylinders from leading manufacturers and are directly interchan-geable with reed switches that use three-wire system technology.

application examplesuposition detection of a cylinder pistonuend position sensing

8



article-no. MZ0701A2 MZ070122 MZ070172 connection 2m cable M12-cable connector, 300mm M8-cable connector, 300mmoperating temperature -25 … +70°C -25 … +70°C -25 … +70°Carticle-no. - MZ0701E2 MZ0701F2 connection - M12-cable connector, 600mm M8-cable connector, 600mmoperating temperature - -25 … +70°C -25 … +70°C article-no. - MZ0701J2 - connection - M12-cable connector, 1000mmoperating temperature - -25 … +70°C -

TECHNICAL DATAsensor surface (active) middle area middle area middle areaoutput signal pnp, no pnp, no pnp, no operating voltage 10 … 30V DC 10 … 30V DC 10 … 30V DC current consumption (w/o load) ≤ 10mA ≤ 10mA ≤ 10mA output current (max. load) 200mA 200mA 200mA voltage drop (max. load) 2.0V DC 2.0V DC 2.0V DC switching hysteresis typ. 1mm typ. 1mm typ. 1mm repeatability ±0.1mm ±0.1mm ±0.1mm switching frequency 1kHz 1kHz 1kHz display (signal) yellow LED yellow LED yellow LED short-circuit protection + + +reverse polarity protection + + + housing material aluminum aluminum aluminumdimensions 5x6.5x27mm 5x6.5x27mm 5x6.5x27mm operating temperature -25 … +70°C -25 … +70°C -25 … +70°Cdegree of protection (EN 60529) IP67 IP67 IP67 connection 2m cable, PUR, 3-wire M12-cable connector, PUR, 3-pin M8-cable connector, PUR, 3-pinconnection accessories - e.g. VK200025 e.g. VK200075mounting accessories AM000076 positive stop AM000076 positive stop AM000076 positive stop cable clip AM000087 cable clip AM000087 cable clip AM000087




article-no. MZ070173 MZ0701A6 MZ070126 connection M8-connector 2m cable M12-cable connector, 300mmoperating temperature -25 … +70°C -25 … +70°C -25 … +70°C article-no. - - MZ0701E6 connection - - M12-cable connector, 600mmoperating temperature - - -25 … +70°C article-no. - - MZ0701J6 connection - - M12-cable connector, 1000mmoperating temperature - - -25 … +70°C

TECHNICAL DATA sensor surface (active) middle area middle area middle areaoutput signal pnp, no pnp, no pnp, no operating voltage 10 … 30V DC 10 … 30V DC 10 … 30V DC current consumption (w/o load) ≤ 15mA ≤ 15mA ≤ 15mA output current (max. load) 200mA 200mA 200mA voltage drop (max. load) 2.0V DC 2.0V DC 2.0V DC switching hysteresis typ. 1mm typ. 1mm typ. 1mm repeatability ±0.1mm ±0.1mm ±0.1mm switching frequency 1kHz 1kHz 1kHz display (signal) yellow LED yellow LED yellow LED short-circuit protection + + +reverse polarity protection + + + housing material aluminum aluminum aluminumdimensions 10.2x16x25mm 5x4.6x18mm 5x4.6x18mm operating temperature -25 … +70°C -25 … +70°C -25 … +70°Cdegree of protection (EN 60529) IP67 IP67 IP67 connection M8-connector, 3-pin cable, 2m, PUR M12-connector, PUR, 3-pinconnection accessories e.g. VK200075 - e.g. VK200025mounting accessories - AM000076 positive stop AM000076 positive stop - cable clip AM000087 cable clip AM000087


8



article-no. MZ070176 MZ070186 - connection M8-cable connector, 300mm M8-cable connector, 300mm -operating temperature -25 … +70°C -25 … +70°C - -article-no. MZ0701F6 - MZ070156 connection M8-cable connector, 600mm - M8-cable connector, 600mmoperating temperature -25 … +70°C - -25 … +130°C (connector max. +100°C)article-no. MZ0701K6 - -connection M8-cable connector, 1000mm - -operating temperature -25 … +70°C - -

TECHNICAL DATA sensor surface (active) middle area middle area middle areaoutput signal pnp, no pnp, no pnp, no operating voltage 10 … 30V DC 10 … 30V DC 10 … 30V DC current consumption (w/o load) ≤ 15mA ≤ 15mA ≤ 15mA output current (max. load) 200mA 200mA 200mA voltage drop (max. load) 2.0V DC 2.0V DC 2.0V DC hysteresis typ. 1mm typ. 1mm typ. 1mm repeatability ±0.1mm ±0.1mm ±0.1mm switching frequency 1kHz 1kHz 1kHz display (signal) yellow LED yellow LED - short-circuit protection + + +reverse polarity protection + + + housing material aluminum aluminum aluminumdimensions 5x4.6x18mm 5x4.6x18mm 5x4.6x18mm operating temperature -25 … +70°C -25 … +70°C -25 … +130°C (connector max. +100°C)degree of protection (EN 60529) IP67 IP67 IP67 connection M8-cable connector, PUR, 3-pin M8-cable connector, teflon, 3-pin M8-cable connector, teflon, 3-pinconnection accessories e.g. VK200075 e.g. VK200075 e.g. VK200075mounting accessories AM000076 positive stop AM000076 positive stop AM000076 positive stop cable clip AM000087 cable clip AM000087 cable clip AM000087


Caution: The output stage is located in the connector!



ACCESSORIESarticle-no. description materialAM000076 positive stop for T-groove zincAM000087 cable clip for T-groove plastic

connection



cable connector with rotatable outside thread


mounting example

positive stop with clamp fastening AM000076

This data sheet only contains the available standard variants. For other output / connection variants, we kindly ask that you contact us. We are happy to supply the right cable socket for the plug equipment. You will find a list in the “accessories” section of the catalog under

-SENSORFLEX® “cable sockets” or in the search window on our homepage www.ipf-electronic.com (using the search term “VK”). Warning: Never use these devices in applications where the safety of a person depends on their functionality.

8




NOTES


8

P fully electronic microsensor

P robust zinc diecast housing (vibration-resistant)


P fast mounting

P very short design with built-in amplifier

P LED display (except for +100°C version)


can be inserted from abovenew fastening system

descriptionOn automatic machines, there is often the requirement that a switching signal must be received at certain piston positions of a pneumatic cylinder. Here, magnetic cylinder sensors are used.The pistons of the pneumatic cylinders are equipped with a ring magnet. The magnetic field penetrates non-magnetizable materials. As a result, the position of the piston can be detect-ed through the cylinder wall.For decades, magnetic cylinder sensors from ipf electronic have been characterized by outstanding reliability and robustness.The new devices of the MZA7 series continue this tradition. The housing is made of diecast zinc; the electronics function contactlessly and are thus wear-free. The compound provides the necessary impermeability and protects the circuit board from any possible impacts.A new fastening mechanism ensures simple installation (can be inserted from above) and, at the same time, a secure hold.

3 different devices are available for selection:The MZA70175 is suitable for standard applications. The pre-vious devices MZ070175 and MZ070173 can be replaced with this device.The MZA70155 is designed for elevated ambient temperatures of up to +100°C.The MZA72185 has a very short travel path.The devices can be used on all cylinders from leading manufac-turers and are directly interchangeable with reed switches that use three-wire system technology. To retain the same position when replacing a cylinder sensor, the locking stop AM000076 is available as an accessory.


dimensions 9.2 x 16.5 x 20mm

T-groove cylinders sensor surface middle area below the connector



TECHNICAL DATAsensor surface (active) middle area middle area below the connectoroutput signal PNP, NO PNP, NO PNP, NO

operating voltage 10 ... 30V DC 10 ... 30V DC 10 ... 30V DCcurrent consumption (w/o load) ≤ 10mA ≤ 10mA ≤ 10mAoutput current (max. load) 150mA 150mA 150mAvoltage drop (max. load) 2.0V DC 2.0V DC 2.0V DChysteresis typ. 1mm typ. 1mm typ. 1mmrepeatability ±0.1mm ±0.1mm ±0.1mmswitching frequency 5kHz 5kHz 5kHz

display (signal) yellow LED - yellow LEDshort-circuit protection + + -reverse polarity protection + + +housing material zinc diecast zinc diecast zinc diecast

dimensions 9.2x16.5x20mm 9.2x16.5x20mm 9.2x16.5x20mmoperating temperature -25 ... +70°C -25 ... +100°C -25 ... +70°Cdegree of protection (EN 60529) IP67 IP67 IP67

connection M8-connector, 3-pin M8-connector, 3-pin M8-connector, 3-pinconnection accessories e.g. VK200075 e.g. VK200075 e.g. VK200075mounting accessories AM000076 positive stop AM000076 positive stop AM000076 positive stop cable clip AM000087 cable clip AM000087 cable clip AM000087

article-no. MZA70175 MZA70155 MZA72185operating temperature -20 ... +70°C -20 ... +100°C -20 ... +70°Cversion standard enlarged temperature range shorter travel pathsensor surface (active) middle area middle area below the connector



8

connection

connector device

1 = L+, 3 = L-, 4 = PNP NO

wire colors: BN = brown (1), BU = blue (3), BK = black (4)

mounting

positive stop with clamp fastening AM000076


AM000076 positive stop for T-groove zincAM000087 cable clip for T-groove plastic








NOTES




P fast mounting

for mounting MZ07on all common cylinders

descriptionFor many tasks in automation technology, it is necessary to detect movements in pneumatic cylinders and to precisely detect the position of the piston.The magnetic cylinder sensors are used for position detection of the piston position in pneumatic cylinders.Through the absolute wear-free mode of operation, they ensure maximum operational dependability and reliability.For this purpose, ipf electronic gmbh offers various mounting options for magnetic cylinder sensors on all cylinders from leading manufacturers.

The MZ07 sensors are mounted on round cylinders using mounting clips AM000036 to AM000046.Moreover, it is also possible to fasten the sensors to dovetailed cylinders with the aid of clamp AM000036, to pull-rod cylinders with the aid of clamps AM000070 to AM000072 and to profile cylinders with the aid of clamps AM000073 to AM000075.


dimensions Ø 8 to Ø 63mm Ø 32 to Ø 40mm Ø 50 to Ø 63mm Ø 80 to Ø 100mm

round cylindersDovetailed cylinderspull-rod cylindersprofile cylinders

MAGNETIC SENSORSACCESSORIES 1500

8


article-no. AM000036 width 12mm dovetailed tenon housing material aluminum

article-no. AM000037 AM000038 AM000039 AM000040 AM000041piston diameter Ø 8mm Ø 10mm Ø 12mm Ø 16mm Ø 20mmround cylinders B1 18.9 20.4 22.7 26.1 33.2 B2 9 11 13 17.1 20.8B3 7 7 7 7 9H1 18.3 19.9 21.9 25.7 30.4housing material plastic plastic plastic plastic plastic

article-no. AM000042 AM000043 AM000044 AM000045 AM000046piston diameter Ø 25mm Ø 32mm Ø 40mm Ø 50mm Ø 63mmround cylinders B1 36.5 41.7 48.3 60.6 74.5 B2 26.1 33.4 41.4 52.1 64.2B3 9 9 9 9 9H1 35.6 42.7 50.7 61.5 74.5housing material plastic plastic plastic plastic plastic

Note: This adapter is not suitable for sensors that can be installed in the groove from above!

MAGNETIC SENSORS1500 ACCESSORIES


article-no. AM000070 AM000071 AM000072 piston diameter Ø 32 … 40mm Ø 50 … 63mm Ø 80 … 100mmpull-rod cylinders housing material aluminum aluminum aluminum

article-no. AM000073 AM000074 AM000075 piston diameter Ø 32 … 40mm Ø 50 … 63mm Ø 80 … 100mmprofile cylinders housing material aluminum aluminum aluminum

MAGNETIC SENSORSACCESSORIES 1500

8


pull-rod cylinder profile cylinder

mounting example

round cylinder dovetailed cylinder


carrying case set AM000090

article-no. description

AM000036 adapter for MZ07 to dovetailAM000037 for cylinder Ø 8AM000038 for cylinder Ø 10AM000039 for cylinder Ø 12AM000040 for cylinder Ø 16AM000041 for cylinder Ø 20AM000042 for cylinder Ø 25AM000043 for cylinder Ø 32AM000044 for cylinder Ø 40AM000045 for cylinder Ø 50AM000046 for cylinder Ø 63AM000070 for pull-rod cylinder Ø 32 and 40AM000071 for pull-rod cylinder Ø 50 and 63AM000072 for pull-rod cylinder Ø 80 and 100AM000073 for profile cylinder Ø 32 and 40AM000074 for profile cylinder Ø 50 and 63AM000075 for profile cylinder Ø 80 and 100VK003S74 straight, displacement connections, 3-pin

MZ070174 10-30V DC, 200mAMZ070175 10-30V DC, 200mA

The AM000089 carrying case set includes the same accessories as the AM000090, only with magnetic cylinder sensors MZ070173 and MZ070176.


MAGNETIC SENSORS1500 ACCESSORIES


P robust metal housing (impact- and vibration-resistant)

P simple mounting, even with very short cylinders


P LED display



for use on profile cylinders and round cylinders

descriptionFor many tasks in automation technology, it is necessary to detect movements in pneumatic cylinders and to precisely detect the position of the piston. Available for selection are both fully electronic sensors as well as reed sensors.Under certain operating conditions, e.g., in the case of strong vibrations, high switching frequencies and high requirements for exact switching points, reed switches have application limits. The lack of short-circuit protection, the high sensitivity in the event of inductive voltage spikes and, in particular, the wear of the switching contacts are frequent causes of problems in practical use.Due to these shortcomings, industry demanded sensors that guarantee long-term and fault-free operation and thereby

avoid machine stoppages and the associated production losses.For this purpose, ipf electronic offers magnetic cylinder sensors that are used for the position detection of the piston position in pneumatic cylinders. Through the absolute wear-free mode of operation, they ensure maximum operational dependability and reliability.The electronic cylinder sensors can be used on cylinders from all leading manufacturers.


dimensions Ø 9mm

round cylinders mounting clip profile cylinders clamp


8


TECHNICAL DATAsensor surface (active) middle area middle area middle area middle areaoutput signal pnp, no pnp, no pnp, no pnp, no

operating voltage 10 … 30V DC 10 … 30V DC 10 … 30V DC 10 … 30V DC current consumption (w/o load) ≤ 15mA ≤ 15mA ≤ 15mA ≤ 15mA output current (max. load) 150mA 200mA 200mA 150mA voltage drop (max. load) 2.0V DC 2.0V DC 2.0V DC 2.0V DC switching hysteresis typ. 1mm typ. 1mm typ. 1mm typ. 1mm repeatability ±0.1mm ±0.1mm ±0.1mm ±0.1mm switching frequency 1kHz 1kHz 1kHz 1kHz

display (signal) yellow LED yellow LED yellow LED yellow LED short-circuit protection + + + +reverse polarity protection + + + +

housing material stainl. steel stainl. steel stainl. steel stainl. steeldimensions Ø 9x22mm Ø 9x29mm Ø 9x22mm Ø 9x22mm operating temperature -25 … +75°C -25 … +75°C -25 … +75°C -25 … +75°Cdegree of protection (EN 60529) IP67 IP67 IP67 IP67

connection M12-cable connector, 3-pin M8-connector, 3-pin M8-connector, 3-pin 90° 2m cable, PUR, 3-wireconnection accessories e.g. VK200025 e.g. VK200075 e.g. VK200075 -mounting accessories e.g. AM000011 e.g. AM000011 e.g. AM000011 e.g. AM000011

article-no. MZR90120 MZR90179 MZR90185 MZR901A8connection M12-cable connector M8-connector M8-connector 90° 2m cable



ACCESSORIES mounting clip for MZR9article-no. for piston Ø B1 B2 B3 H1 H2 H3 housing material

AM000011 Ø 8mm 21 - 14 23.5 16.5 9 plasticAM000012 Ø 10mm 22 0.5 14 26 18.5 10 plasticAM000013 Ø 12mm 22 4 11 28.5 20 10.2 plasticAM000014 Ø 16mm 22.5 4 11.5 33.5 22.5 12.4 plasticAM000015 Ø 20mm 26.5 5.5 13.5 35.5 22.5 14 plasticAM000016 Ø 25mm 31.5 7.5 16 40.5 25 16 plasticAM000047 Ø 32mm 38.6 7.9 - 47.8 29 19.7 plasticAM000048 Ø 40mm 46.6 8.1 - 55.8 33 23.8 plastic

ACCESSORIES mounting clip for MZR9article-no. for piston Ø Rmax B housing material

AM000023 Ø 32mm 29 10 plasticAM000024 Ø 40mm 32 10 plasticAM000025 Ø 50mm 38 10 plastic AM000026 Ø 63mm 46 10 plastic AM000027 Ø 80mm 54 12 plasticAM000028 Ø 100mm 64 12 plastic

ACCESSORIES twin clip for MZR9article-no. for piston Ø S T housing material

AM000029 Ø 8/10mm 27.4 19.6 plastic/stainl. steelAM000030 Ø 12mm 28.5 21.4 plastic/stainl. steelAM000031 Ø 16mm 29.4 23.4 plastic/stainl. steelAM000032 Ø 20mm 29.7 28.8 plastic/stainl. steelAM000033 Ø 25mm 31.4 28.7 plastic/stainl. steel

connection



cable connector with rotatable outside thread


8


ACCESSORIES clamp for MZR9article-no. description housing material

AM000021 for cylinder rails up to 12mm Ø zincAM000022 for cylinder rails up to 14mm Ø zinc

ACCESSORIES clip for MZR9article-no. description comment housing material

AM000053 accessories clip 1 mounting MZR9 on SMC cylinders aluminumAM000054 accessories clip 2 mounting MZR9 on SMC cylinders aluminum


clip 1 clip 2






P fully electronic version

P easy mounting



P impact- and vibration-resistant


P LED display

wear-free cylinder switchrobust metal housing

descriptionFor many tasks in automation technology, it is necessary to detect movements in pneumatic and hydraulic cylinders and to precisely detect the piston position. In control technology, cylinder sensors are used for this purpose. These magnetic sensors function contactlessly and wear-free on a magnetic switching element on the cylinder piston.Magnetic cylinder sensors offer a high switching distance yet still have a small design.Because magnetic fields penetrate all non-magnetizable materials, the sensors are able to detect magnets through walls made of non-ferrous metal, stainless steel and aluminum.The sensor of the MZ13 series can be used on nearly all cylinder variants due to the universal type of „strap retainer fastening“ and is directly interchangeable with existing reed switches that use three-wire system technology.The sensor is provided with a notch for the strap retainer and

has rounded (concave) surfaces on two sides. As a result, exact fastening and secure guiding on the corresponding cylinder are ensured. By means of these flexible mounting options, the out-let direction of the connector may point in various directions. The LED indicator, which signals the detection of the magnetic field, is highly visible when viewing the top and front sides.Through the absolute wear-free mode of operation, maximum operational dependability and reliability are ensu-red.

application examplesu position detection of a cylinder pistonu end position sensing during feed movementsu recognition of magnetic switching cams, even through

housing walls

dimensions 12 x 12 x 22mm round cylinders strap retainers Ø 6 ... Ø 147mmpull-rods clamps up to 6mmdouble rails clamps up to 6mm


8


mounting examples

Round cylinder with strap retainer double rail cylinder with clamp pull-rod cylinder with clamp

article-no. MZ130175connection M8-connector

TECHNICAL DATAsensor surface (active) middle areaoutput signal pnp, no

operating voltage 10 … 30V DCcurrent consumption (w/o load) ≤ 15mAoutput current (max. load) 200mAvoltage drop (max. load) 2.0V DChysteresis typ. 1mmrepeat accuracy ±0.1mmswitching frequency 1kHz

display (signal) yellow LEDshort-circuit protection +reverse polarity protection +

housing material aluminumdimensions 12x12x22mmoperating temperature -25 … +70°Cdegree of protection (EN 60529) IP67

connection M8-connector, 3-pinconnection accessories e.g. VK200075mounting accessories (clamp) AM000005, zinc, for pull-rods and double rails up to 6mmmounting accessories (strap retainer) AM000003, stainl. steel, for cylinder Ø 6 to 17mm AM000061, stainl. steel, for cylinder Ø 16 to 27mm AM000004, stainl. steel, for cylinder Ø 26 to 37mm AM000062, stainl. steel, for cylinder Ø 36 to 47mm AM000007, stainl. steel, for cylinder Ø 50 to 67mm AM000008, stainl. steel, for cylinder Ø 80 to 97mm AM000063, stainl. steel, for cylinder Ø 100 to 115mm AM000064, stainl. steel, for cylinder Ø 130 to 147mm

connection clamp








P easy to mount from above

P can be used independent of cylinder manufacturer

P impact- and vibration-resistant

P operating temperature up to +130°C



P LED display

P connection with cable and M8-connector

electronic cylinder switchrobust metal housing

descriptionOn automatic machines, there is often the requirement that a switching signal must be received at certain piston positions of a pneumatic cylinder. Here, magnetic cylinder sensors are used.These magnetic sensors are used for contactless and wear-free position detection in control technology. They are used ever-ywhere inductive sensors are pushed to their limits.Compared to inductive sensors, magnetic cylinder sensors offer a considerably higher switching distance yet still have a small design.Because magnetic fields penetrate all non-magnetizable mate-rials, the sensors are able to detect magnets through, e.g.,

walls made of non-ferrous metal, stainless steel, aluminum, plastic or wood.The electronic cylinder sensors can be used on all cylin-ders from leading manufacturers (Bosch, Festo, Norgren Martonair, Numatics) and are directly interchangeab-le with reed switches that use three-wire system technology.


dimensions 13.5 x 13.5 x 20mm 11.8 x 4.5 x 16.5mm

dovetailed tenon sensor surface edge area middle area


8


TECHNICAL DATAsensor surface (active) edge area edge area middle area middle area output signal pnp, no pnp, no pnp, no pnp, no

operating voltage 10 … 30V DC 10 … 30V DC 10 … 30V DC 10 … 30V DCcurrent consumption (w/o load) ≤ 15mA ≤ 15mA ≤ 15mA ≤ 15mAoutput current (max. load) 200mA 200mA 200mA 200mA voltage drop (max. load) 2.0V DC 2.0V DC 2.0V DC 2.0V DCswitching hysteresis typ. 1mm typ. 1mm typ. 1mm typ. 1mmrepeat accuracy ±0.1mm ±0.1mm ±0.1mm ±0.1mmswitching frequency 1kHz 1kHz 1kHz 1kHz


housing material zinc diecast zinc diecast zinc diecast zinc diecastdimensions 13.5x13.5x20mm 20.5x13.5x20mm 13.5x13.5x20mm 20.5x13.5x20mmoperating temperature -25 … +75°C -25 … +75°C -25 … +75°C -25 … +75°Cdegree of protection (EN 60529) IP67 IP67 IP67 IP67

connection 2m PUR cable, 3-wire M8-connector, 3-pin 2m PUR cable, 3-wire M8-connector, 3-pinconnection accessories - e.g. VK200075 - e.g. VK200075

article-no. MZ150103 MZ150173 MZ150105 MZ150175 sensor surface edge area edge area middle area middle area operating temperature -25 … +75°C -25 … +75°C -25 … +75°C -25 … +75°Cconnection 2m PUR cable M8-connector 2m PUR cable M8-connector



TECHNICAL DATAsensor surface (active) middle area middle areaoutput signal pnp, no pnp, no

operating voltage 10 … 30V DC 10 … 30V DC current consumption (w/o load) ≤ 15mA ≤ 15mA output current (max. load) 150mA 150mA voltage drop (max. load) 2.0V DC 2.0V DC switching hysteresis typ. 1mm typ. 1mm repeat accuracy ±0.1mm ±0.1mm switching frequency 1kHz 1kHz


housing material aluminum aluminumdimensions 11.8x4.5x16.5mm 11.8x4.5x16.5mmoperating temperature -25 … +120°C -25 … +75°C degree of protection (EN 60529) IP67 IP67

connection M8-cable connector, 3-pin M8-cable connector, 3-pinconnection accessories e.g. VK200075 e.g. VK200075

article-no. MZ150156 MZ150176sensor surface middle area middle areaoperating temperature -25 … +120°C -25 … +75°C connection M8-cable connector, teflon cable, length 600mm M8-cable connector, PUR cable, length 300mm


8


connection



mounting







general

Ultrasonic sensors are contactless and wear-free position switches that can also be used under harsh environmental conditions. A key advantage of these devices is that they can detect objects made of nearly any material and with nearly any surface texture. Solid, liquid, granular and powdery materials are detected without the shape or color of the objects having any effect on the measurement result. The ability to detect transparent materials such as foils or liquids is of special significance.

With a piezoelectric sound transducer, short pulses or pulse trains are emitted at specific time intervals. After being reflec-ted at the measurement object, the signals are again received by the sensor and the propagation time measured. Using this time, which is proportional to the signal path, the speed of sound C is used to calculate the distance to the object:Sn = (C x t) / 2. The propagation velocity of sound in air is heavily dependent on temperature and is 343m/s at a temperature of 20°C. The value changes by approx. 0.18% per degree °C. Tem-perature fluctuations in the air are therefore offset by means of a temperature-compensated propagation time measurement.

Depending on the application in positioning, regulation and control systems, the requirements on these sensors vary widely. Often, the versions are therefore offered with one analog output (current or voltage) and one switching output (pnp or npn). Moreover, with some sensors it is possible to transfer the measurement result via an RS232 interface. Programming of the sensor can then also be programmed via this interface.Many ultrasonic sensors with digital output include a switching point that is adjustable via a potentiometer or by means of teach-in. The object is thereby detected only at an exactly defined distance.

synchronization (e.g. UT180126 / UT180127 / UT180128)With sensors that are operated very close to one another, mutual interference may occur. To avoid this effect, the sen-sors are synchronized, i.e., the transmission pulse is emitted at the same time for all sensors. The synchronization occurs automatically if the corresponding connections lines of the sensors are connected to one another. The sensor with the longest echo propagation time determines the measurement frequency. Furthermore, the receiving sensitivity can be adjusted via a potentiometer in order to compensate for the influence of echos from other sensors, two-source echos or echos from the sides.

dead zoneThe dead zone is defined as the area between the sensor head and the minimum switching distance. The sensor may not be used within this area since objects are not detected or are detected in an undefined manner.

synchronization line

clock master

sound reflection at the measurement object

ultrasonic sensor

piezoelectric sound transducer

switching distance Sn

ULTRASONIC SENSORSINTRODUCTION 1000

9


NOTES

ULTRASONIC SENSORS1000 INTRODUCTION


P very small angle of beam spread

P version with attached beam columnator for nearly linear sound cone

P LED switching state display and setting control

P setting via teach-in input


analog output 0 to 10V orswitching output with teach-in

descriptionThe ultrasonic sensors from ipf electronic make possible contactless and non-contacting position detection. The distances are determined using the echo propagation time process. Here, the propagation time measurement is temperature compensated and makes possible very accurate detection of sound-reflecting objects of any color and material over a large temperature range.Due to the high sound frequency, the ultrasonic sensor is insen-sitive to interference even in harsh industrial environments.To teach-in the analog output or the switching point, the sup-ply voltage is applied to the teach-in input.Serving as an alignment and setting control is an LED display that supports the adjustment in teach-in mode.Analog sensors: any interval within the measuring range (mea-suring range section ≥ 5mm) can be taught in for the analog output.

Switching sensors: the sensing range within the detection ran-ge can be taught in very exactly for the PNP output.Version with beam columnator: by calibrating the sensors to this attachment element, which was manufactured specifi-cally for this purpose, the lateral spread of the sound cone is reduced and straightened (quasi linear).

application examplesu filling level measurement of a wide range of materialsu measurement of heights, e.g., packages on conveyor belts

or palletsu distance measurement of optically undetectable materialsu winding and unwinding control of any type of foilu control of material tension by means of sag measurementu detection of thicknesses and diametersu length and distance measurement systems

dimensions M12x1 dif. reflection sensors (norm.) measuring range 10 … 200mmdif. reflection sensors (beam column.) measuring range 2 … 82mmdif. reflection sensors (norm.) detection range 30 … 200mmdif. reflection sensors (beam column.) detection range 5 … 70mm

ULTRASONIC SENSORSDIFFUSE REFLECTION SENSORS 1100

9


TECHNICAL DATAmeasuring range 20 … 200mm 2 … 82mmoutput signal 0 … 10V DC 0 … 10V DC

operating voltage 15 … 30V DC 15 … 30V DCcurrent consumption (w/o load) ≤ 35mA ≤ 35mAoutput current (w/o load) ≤ 20mA ≤ 20mAresolution ≤ 0.3mm ≤ 0.3mmtemperature drift ≤ 2% S teach ≤ 2% S teachrepeat accuracy ≤ 0.5mm ≤ 0.5mmcarrier frequency 380kHz 380kHzresponse/decay time ≤ 30ms / ≤ 30ms ≤ 30ms / ≤ 30mssound frequency 16Hz 16Hz

display (teach) yellow + red LED yellow + red LEDdisplay (measuring range) yellow LED yellow LEDdisplay (alarm) red LED below measuring range red LED below measuring rangesetting remote-teach input (supply on pin 2) remote-teach input (supply on pin 2)short-circuit protection + +reverse polarity protection + +

dimensions M12x1 M12x1length (thread/complete) 55mm / 70mm 42.5mm / 88mmhousing material nickel-plated brass nickel-plated brassoperating temperature -10 … +60°C -10 … +60°Cdegree of protection (EN 60529) IP67 IP67

connection M12-connector, 4-pin M12-connector, 4-pinconnection accessories e.g. VK200325 e.g. VK200325mounting accessories (universal holder) AY000115 AY000115accessories teach adapter: AV000114 teach adapter: AV000114

article-no. UT120020 UT120021version dif. reflection sensor dif. reflection sensor with beam columnatormeasuring range 20 … 200mm 2 … 82mmoutput signal 0 … 10V DC 0 … 10V DC

ULTRASONIC SENSORS1100 DIFFUSE REFLECTION SENSORS


TECHNICAL DATA sensing range 10 … 200mm 5 … 70mmoutput signal see above see above

operating voltage 12 … 30V DC 12 … 30V DCcurrent consumption (w/o load) ≤ 35mA ≤ 35mAoutput current (max. load) ≤ 200mA ≤ 200mAvoltage drop (max. load) 2V DC 2V DCtemperature drift ≤ 0.18% S teach ≤ 0.18% S teachhysteresis 4% 4%repeat accuracy ≤ 0.5mm ≤ 0.5mmcarrier frequency 380kHz 380kHzresponse/decay time ≤ 10ms / ≤ 10ms ≤ 10ms / ≤ 10msswitching frequency 50Hz 50Hz

display (teach) green flashing LED green flashing LEDdisplay (signal) green LED green LEDsetting remote-teach input (supply on pin 2) remote-teach input (supply on pin 2)short-circuit protection + +reverse polarity protection + +

dimensions M12x1 M12x1length (thread/complete) 55mm / 70mm 42.5mm / 100mmhousing material nickel-plated brass nickel-plated brassoperating temperature -10 … +60°C -10 … +60°Cdegree of protection (EN 60529) IP67 IP67

connection M12-connector, 4-pin M12-connector, 4-pinconnection accessories e.g. VK200325 e.g. VK200325mounting accessories (universal holder) AY000115 AY000115accessories teach adapter: AV000114 teach adapter: AV000114

article-no. UT120120 UT120121version dif. reflection sensor dif. reflection sensor with beam columnatorsensing range 10 … 200mm 5 … 70mmoutput pnp, no pnp, no

article-no. UT120220 -output pnp, nc -

article-no. UT121120 -output npn, no -


9


AY000049 AY000053 AY000054


AY000088 base module * jaws: stainless steel, ball pin: galvanized steelAY000115 mounting kit for M5, M8, M12 sensors stainless steel

AY000049 quick clip 12, plastic for M12-sensor, roundAY000053 base, straight, plastic for quick clip 12 and 18, roundAY000054 base, angular, plastic for quick clip 12 and 18, roundAY000114 teach-in, adapter M12-socket/M12-connector

* The AY000088 base module is included with each mounting kit. Material of the screw and nuts: galvanized steel

connection



analog digital







P synchronization option for the operation of multiple sensors

P very accurate position detection of any objects with high repeat accuracy

P LED display

P adjustable switching point of PNP output


analog output for measurement tasks adjustable PNP switching output

descriptionipf ultrasonic sensors operate as contactless and non-cont-acting position switches that determine distances according to the echo propagation time process. The propagation time measurement is temperature compensated and makes possib-le very accurate position detection of sound-reflecting objects of any color and material over a large temperature range.Thanks to the high sound frequency, the ultrasonic sensor is insensitive to interference.The synchronization line remains open in standard mode for the devices in this data sheet. The connection to 0V interrupts transmission operation. The switching distance remains stored according to the last measurement. Multiple sensors can be synchronized by connecting them together. This is recommended if sensors are arranged close together in order to prevent mutual interference of two or

more sensors of the same type.

application examplesu detection of optically undetectable materialsu filling level measurement of bulk materials and liquids in

containers u measurement of heights, e.g., packages on conveyor belts,

pallets and stacking devicesu distance measurement, e.g., with driverless vehiclesu winding and unwinding control of any type of foilu detection of thicknesses and diametersu regulation of material tension through sag measurementu positioning of goods in automatic storage systemsu length measurement systems

dimensions M18x1 dif. reflection sensors measuring range 60 to 300mm 100 to 600mm 200 to 1500mm

dif. reflection sensors sensing range 60 to 300mm 100 to 600mm 200 to 1500mm


9


article-no. - UT180025 UT180024measuring range - 100 … 600mm 200 … 1500mmoutput - 4 … 20mA 4 … 20mA

article-no. UT180026 UT180027 UT180028measuring range 60 … 300mm 100 … 600mm 200 … 1500mmoutput 0 … 10V 0 … 10V 0 … 10V

TECHNICAL DATAmeasuring range 60 … 300mm 100 … 600mm 200 … 1500mmsound cone (angle of beam spread) 8° 8° 8°output analog (see above) analog (see above) analog (see above)

operating voltage 19 … 30V DC 19 … 30V DC 19 … 30V DCcurrent consumption (w/o load) ≤ 35mA ≤ 35mA ≤ 35mAoutput current (max. load) - - -carrier frequency 330kHz 300kHz 180kHzlinearity deviation < 0.3% < 0.3% < 0.3%repeat accuracy 0.2% 0.2% 0.2%response time < 60ms < 60ms < 120ms

display (signal) - - -adjustment - - -input release / lock / sync release / lock / sync release / lock / sync short-circuit protection + + +reverse polarity protection + + +

dimensions M18x1 M18x1 M18x1length (thread/complete) 65mm / 104mm 65mm / 104mm 65mm / 104mmhousing material plastic plastic plasticoperating temperature -15 … +70°C -15 … +70°C -15 … +70°Cdegree of protection (EN 60529) IP67 IP67 IP67

connection M12-connector, 4-pin M12-connector, 4-pin M12-connector, 4-pinconnection accessories e.g. VK205325 e.g. VK205325 e.g. VK205325mounting accessories (clip) e.g. AY000051 e.g. AY000051 e.g. AY000051mounting accessories (universal holder) AY000117 AY000117 AY000117accessories 90° deflection reflector AU000012 90° deflection reflector AU000012 90° deflection reflector AU000012



article-no. UT180126 UT180127 UT180128sensing range 60 … 300mm 100 … 600mm 200 … 1500mmoutput pnp, no pnp, no pnp, no

TECHNICAL DATAsensing range 60 … 300mm 100 … 600mm 200 … 1500mmsound cone (angle of beam spread) 8° 8° 8°output pnp, no pnp, no pnp, no

operating voltage 19 … 30V DC 19 … 30V DC 19 … 30V DCcurrent consumption (w/o load) ≤ 35mA ≤ 35mA ≤ 35mAoutput current (max. load) 500mA 500mA 500mAcarrier frequency 330kHz 300kHz 180kHzhysteresis 2.5% 2.5% 2.0%repeat accuracy 0.2% 0.2% 0.2%switching frequency 20Hz 20Hz 10Hz

display (signal) yellow LED yellow LED yellow LEDsetting potentiometer potentiometer potentiometercontrol input release / lock / sync release / lock / sync release / lock / sync short-circuit protection + + +reverse polarity protection + + +

dimensions M18x1 M18x1 M18x1length (thread/complete) 65mm / 92mm 65mm / 92mm 65mm / 92mmhousing material plastic plastic plasticoperating temperature -15 … +70°C -15 … +70°C -15 … +70°Ctemperature compensation 0 … +60°C 0 … +60°C 0 … +60°Cdegree of protection (EN 60529) IP67 IP67 IP67

connection M12 cable connector, 4-pin M12 cable connector, 4-pin M12 cable connector, 4-pinconnection accessories e.g. VK200325 e.g. VK200325 e.g. VK200325mounting accessories (clip) e.g. AY000051 e.g. AY000051 e.g. AY000051mounting accessories (universal holder) AY000117 AY000117 AY000117accessories 90° deflection reflector AU000012 90° deflection reflector AU000012 90° deflection reflector AU000012


9



AY000051 quick clip 18, round, plastic for M18-sensor, roundAY000053 base, straight, plastic for quick clip 12 and 18, round AY000054 base, angular, plastic for quick clip 12 and 18, round

AY000117 mounting accessories (universal holder) fitting panel made of stainless steel

connection analog output switching output

detection range of the ultrasonic sensors


sensor blocked: connect PIN 2 with 0Vsynchronization: connect PIN 2 with +Vsrelease: PIN 2 not assigned

AY000051 AY000053 AY000054





definite detection of an object 10 x 10cm possible detection of a large object definite detection of an object 10 x 10cm possible detection of a large object



P plastic sleeve made of PBT

P LED switching state display and alignment aid

P high resolution


dimensions M18x1 M30x1.5

dif. reflection sensors sensing range (teachable) 30 … 400mm 60 … 500mm 100 … 800mm 80 … 1600mm 200 … 2000mm 300 … 3500mm

analog output 0-10V, 4-20mA2 switching outputs, programmable

descriptionipf ultrasonic sensors operate as contactless and non-cont-acting position switches or as position meters. The distances are determined using the echo propagation time process. The propagation time measurement is temperature compensa-ted and makes possible very accurate position detection of sound-reflecting objects of any color and material over a large temperature range.Thanks to the high sound frequency, the ultrasonic sensor is insensitive to interference even in harsh industrial environments.To teach-in the switching points or the analog output, the teach-in input is to be connected to GND via a push button.Serving as an alignment aid is a green LED that lights up only if the sensor receives an echo.

analog sensorsAny interval within the measuring range can be taught in for the analog output.

switching sensorsThe position and characteristics of the two switching out-

puts can be taught in via the teach-in input with millimeter accuracy. The following functions can be programmed:

1. normal switching function (no/nc)2. window function3. hysteresis function

application examplesufilling level measurement of bulk materials and liquidsumeasurement of heights, e.g., packages on conveyor belts

or palletsudistance measurement, e.g., detection of optically undetec-

table materialsumeasurement of stacking heights on loading and unloading

devicesuwinding and unwinding control of any type of foiludetection of thicknesses and diametersucontrol of material tension by means of sag measurementulength measurement systems


9


TECHNICAL DATAsensing range 30 … 400mm 60 … 500mm 100 … 800mm 200 … 2000mm 80 … 1600mopening of the sound cone 8° 8° 8° 8° 8°resolution 0.125mm 0.25mm 0.25mm 1.0mm 1.0mmoutput signal see above see above see above see above see aboveoperating voltage 15 … 30V DC 15 … 30V DC 15 … 30V DC 15 … 30V DC 15 … 30V DCcurrent consumption (w/o load) ≤ 30mA ≤ 30mA ≤ 30mA ≤ 30mA ≤ 30mAoutput current (max. load) - - - - -carrier frequency 360kHz 330kHz 300kHz 180kHz 220kHzrepeat accuracy 1mm 1mm 1mm 2mm 2mmlinearity deviation < 0.5% < 0.5% < 0.5% < 0.5% < 0.5%response time 60ms 100ms 100ms 200ms 140msswitching frequency - - - - -

display (measuring range) 2 x yellow LED 2 x yellow LED 2 x yellow LED 2 x yellow LED green LEDdisplay (alignment aid) green LED green LED green LED green LED green LEDsetting teach-in teach-in teach-in teach-in teach-inshort-circuit protection + + + + + reverse polarity protection + + + + +

housing material PBT PBT PBT PBT PBTdimensions M18x1 M18x1 M18x1 M18x1 M18x1length (thread/complete) 65 / 100.5mm 65 / 102mm 65 / 102.5mm 65 / 103.5mm 65 / 103.5mmoperating temperature -20 … +70°C -20 … +70°C -20 … +70°C -20 … +70°C -20 … +70°Cdegree of protection (EN 60529) IP65 IP67 IP67 IP67 IP65

connection M12-connector, 5-pin M12-connector, 5-pin M12-connector, 5-pin M12-connector, 5-pin M12-connector, 5-pin

connection accessories e.g. VK205625 e.g. VK205625 e.g. VK205625 e.g. VK205625 e.g. VK205625

article-no. UT180023 UT180020 UT180021 UT180022 UT18002Fmeasuring range 30 … 400mm 60 … 500mm 100 … 800mm 200 … 2000mm 80 … 1600mmoutput 4 … 20mA 4 … 20mA 4 … 20mA 4 … 20mA 4 … 20mA

article-no. UT18002E UT18002A UT18002B UT18002C UT18002Hmeasuring range 30 … 400mm 60 … 500mm 100 … 800mm 200 … 2000mm 80 … 1600mmoutput 0 … 10V DC 0 … 10V DC 0 … 10V DC 0 … 10V DC 0 … 10V DC



TECHNICAL DATAsensing range 30 … 400mm 60 … 500mm 100 … 800mm 200 … 2000mm 80 … 1600mmopening of the sound cone 8° 8° 8° 8° 8°resolution 0.125mm 0.25mm 1mm 1mm 1mmoutput signal 2 x pnp, no / nc 2 x pnp, no / nc 2 x pnp, no / nc 2 x pnp, no / nc 2 x pnp, no / nc

operating voltage 12 … 30V DC 12 … 30V DC 12 … 30V DC 12 … 30V DC 12 … 30V DCoutput current (max. load) 500mA 500mA 500mA 500mA 500mAcurrent consumption (w/o load) ≤ 60mA ≤ 60mA ≤ 60mA ≤ 60mA ≤ 60mAcarrier frequency 360kHz 330kHz 300kHz 180kHz 220kHzrepeat accuracy 0.5% 1mm 1mm 2mm 2mmhysteresis 1% 1% 1% 1% 1% response time - - - - -switching frequency 15Hz 10Hz 10Hz 5Hz 6Hz

display (signal) 2 x yellow LED 2 x yellow LED 2 x yellow LED 2 x yellow LED 2 x yellow LEDdisplay (alignment aid) green LED green LED green LED green LED green LEDsetting (switching point) teach-in teach-in teach-in teach-in teach-inshort-circuit protection + + + + + reverse polarity protection + + + + +

housing material PBT PBT PBT PBT PBTdimensions M18x1 M18x1 M18x1 M18x1 M18x1length (thread/complete) 65 / 100.5mm 65 / 102mm 65 / 102.5mm 65 / 103.5mm 65 / 103.5mmoperating temperature -20 … +70°C -20 … +70°C -20 … +70°C -15 … +70°C -15 … +70°Cdegree of protection (EN 60529) IP65 IP67 IP67 IP67 IP65

connection M12-connector, 5-pin M12-connector, 5-pin M12-connector, 5-pin M12-connector, 5-pin M12-connector, 5-pin

connection accessories e.g. VK205625 e.g. VK205625 e.g. VK205625 e.g. VK205625 e.g. VK205625

article-no. UT180323 UT180320 UT180321 UT180322 UT180324 detection range 30 … 400mm 60 … 500mm 100 … 800mm 200 … 2000mm 80 …1600mmoutput 2 x pnp, no / nc 2 x pnp, no / nc 2 x pnp, no / nc 2 x pnp, no / nc 2 x pnp, no / nc


9


TECHNICAL DATAsensing range 300 … 3500mm 300 … 3500mmopening of the sound cone 8° 8°resolution 1mm 1mmoutput signal see above 2 x pnp, no / nc

operating voltage 15 … 30V DC 12 … 30V DC current consumption (w/o load) ≤ 30mA ≤ 60mAoutput current (max. load) - 500mAcarrier frequency 130kHz 130kHzrepeat accuracy 2mm 2mm linearity deviation < 0.5% - hysteresis - 1%response time 400ms -switching frequency - 2.5Hz

display (measuring range) 2 x yellow LED -display (signal) - 2 x yellow LEDalignment aid green LED green LEDsetting teach-in teach-in short-circuit protection + +reverse polarity protection + +

housing material PBT PBTdimensions M30x1.5 M30x1.5length (thread/complete) 90 / 141mm 90 / 141mmoperating temperature -20 … +70°C -20 … +70°Cdegree of protection (EN 60529) IP67 IP67


article-no. UT300020 UT300320 measuring range 300 … 3500mm 300 … 3500mmoutput 4 … 20mA 2 x pnp, no / nc

article-no. UT30002A - measuring range 300 … 3500mm -output 0 … 10V DC -




AU000002 deflection angle 18, plan 90° for design 18AU000001 deflection angle 18, focus 90° for design 18AU000003 deflection angle 30, plan 90° for design 30AU000004 deflection angle 30, focus 90° for design 30AU000012 deflection angle 18, compact for design 18AU000010 deflection angle 30, compact for design 30

AU000013 M12 / M12 teach-in adapter, plastic 12-30V DC

AY000051 quick clip 18, plastic for sensor 18mm, roundAY000053 base, straight, plastic for quick clip 12 and 18AY000054 base, angular, plastic for quick clip 12 and 18

connection

analog devices switching devices

wire colors: brown (1), wh = white (2), bu = blue (3), bk = black (4), gy = gray (5)


AY000051 AY000052 AY000053





9



NOTES


P large measuring range

P current or voltage output and two switching outputs

P simple adjustability by means of teach-in button and LED displays

P high sound intensity

P adjustable normally open and normally closed function

analog output measuring range as well as two adjustable PNP switching points

descriptionipf ultrasonic sensors operate as contactless and non-cont-acting position switches or as position meters. The distances are determined using the echo propagation time process. The propagation time measurement is temperature compensa-ted and makes possible very accurate position detection of sound-reflecting objects of any color and material over a large temperature range.Through the use of a microprocessor, the ultrasonic sensors are insensitive to interference.The devices have one analog voltage output (0 … 10V) or one current output (4 … 20mA) and two additional PNP outputs whose switching point can be freely defined. The start and end of the analog range are also defined by tea-ching-in (teach-in button on the sensor) the two corresponding switching points, depending on whether the characteristic curve is to be positive or negative. The switching characteristic of the normally closed (nc) and normally open contact (no) can also be programmed in this way.Using just a single teach-in button, the start and end of the

analog range can be set independent of one another. The end points determine the position of the switching points. Three LED displays facilitate simple adjustment of the sensor.

application examplesu filling level measurement of bulk materials and liquids in

containersu measurement of heights and positioning tasks, e.g. packages

on conveyor belts, pallets or stackingu distance measurement, e.g., with automatic or driverless

transport vehiclesu detection of materials that are not detectable with optical

sensorsu winding and unwinding control of any type of foilu detection of thicknesses and diametersu control of material tension by means of sag measurementu positioning of goods in automatic storage systemsu length measurement systems for a wide range of objects

dimensions M30x1.5 dif. reflection sensors measuring range / sensing range 150 … 3500mm


9


article-no. UT300024 UT300026 UT300025operating range 150 … 1500mm 250 … 2000mm 350 … 3500mmoutput 4 … 20mA / 2x PNP no/nc 4 … 20mA / 2x PNP no/nc 4 … 20mA / 2x PNP no/nc

article-no. UT300027 UT300028 UT300029operating range 150 … 1500mm 250 … 2000mm 350 … 3500mmoutput 0 … 10V / 2x PNP no/nc 0 … 10V / 2x PNP no/nc 0 … 10V / 2x PNP no/nc

TECHNICAL DATAmeasuring range / sensing range 150 … 1500mm 250 … 2000mm 350 … 3500mmsound cone (angle of beam spread) 8° 8° 8°resolution 1mm 1mm 1mmoutput signal analog (see above) / 2x PNP no/nc analog (see above) / 2x PNP no/nc analog (see above) / 2x PNP no/nc

operating voltage 19 … 30V DC 19 … 30V DC 19 … 30V DCcurrent consumption (w/o load) ≤ 45mA ≤ 45mA ≤ 45mAoutput current (max. load) 100mA 100mA 100mAcarrier frequency 200kHz 180kHz 130kHzlinearity deviation 0.5% 0.5% 0.5%hysteresis 1% 1% 1%repeat accuracy 0.4% / >2mm 0.4% / >2mm 0.4% / >2mmswitching frequency 2Hz 2Hz 1Hzresponse time 300ms 300ms 500ms

display (measuring range) 2x yellow LED 2x yellow LED 2x yellow LEDdisplay (alignment aid) green LED green LED green LEDsetting teach-in button teach-in button teach-in buttontemperature compensation 0 … +50°C 0 … +50°C 0 … +50°Cshort-circuit protection + + +reverse polarity protection + + +

dimensions M30x1.5 M30x1.5 M30x1.5length (thread/complete) 90mm / 136mm 90mm / 140mm 90mm / 141mmhousing material plastic plastic plasticoperating temperature -15 … +70°C -15 … +70°C -15 … +70°Cdegree of protection (EN 60529) IP65 IP65 IP65

connection M12-connector, 5-pin M12-connector, 5-pin M12-connector, 5-pinconnection accessories e.g. VK205625 e.g. VK205625 e.g. VK205625mounting accessories (clip) AY000061 AY000061 AY000061accessories 90° deflection reflector AU000010 90° deflection reflector AU000010 90° deflection reflector AU000010

* observe distance from mounting clip to sensor head



ACCESSORIESarticle-no. description sensor diameter article material screw material

AY000061 quick clip Ø 30mm PA6 galvanized steel




detection ranges of the ultrasonic sensors

connection

wire colors: bn = brown (1), wh = white (2), bu = blue (3), bk = black (4), gr = gray (5)

analog characteristic curve control elements

The characteristic curve can also be inverted during the teach-in process.


mounting clip AY000061


9



NOTES


P very small angle of beam spread

P contactless and accurate detection

P measuring range and sensing range / range can be taught in by means of teach-in input

P no dead zone in detection range of the ultrasonic retro-reflective sensor

dimensions 20 x 15 x 42mm dif. reflection sensors (analog) detection range 20 … 200mmdif. reflection sensors (digital) detection range 10 … 200mmretro-reflective sensors detection range 0 … 200mm

switching or analog outputcomfortable teach-in function

descriptionThese ipf ultrasonic sensors are used for position checking or distance measurement. This distance is determined contact-lessly using the echo propagation time process.The devices detect objects with widely different properties - liquid, solid, powder and even transparent – and surfaces: rough or smooth, clean or soiled, wet or dry. They are insen-sitive to external influences such as light or temperature and are especially reliable in changing or difficult environmental conditions. The sensors include LED displays as setting control for the teach-in function and for monitoring the switching signal or the measuring range.The desired operating range is taught in by connecting the positive potential of the supply voltage to the teach-in input (pin 2) or by actuating the teach button on the sensor. For the versions with switching output, the sensing range is set with millimeter accuracy with respect to the desired reference object distance. For the ultrasonic sensors with analog output, the measuring range can be set to a range of minimum 5mm. Within the overall detection range (20 to 200mm), this secti-on can be taught in at any point (e.g., measuring range 50 to

55mm or 90 to 95mm).The UT21 diffuse reflection devices have a „dead zone“ directly in front of the sensor head in which no objects can be detected. Thus, the sensor must be mounted set back from the detection range by the length of the „dead zone“. The UR21 retro-re-flective sensor does not have this „dead zone“ since the range is taught in to a sound-reflecting reference surface (reflector min. 30x30mm). Thus, everything is detected that lies in the reflection path between sensor and reference surface and influences it accordingly.

application examplesu level measurement of bulk materials or liquidsu measurement of filling levels in very small containersu presence checking or distance measurement of clear or transparent objectsu measurement of object heights on conveying systemsu winding and unwinding control of any type of foilu control of material tension by means of sag measurementu detection of thicknesses and diameters

ULTRASONIC SENSORSDIFFUSE REFLECTION SENSORS, RETRO-REFLECTIVE SENSORS 1800

9


TECHNICAL DATAmeasuring range 20 … 200mm 20 … 200mmteaching range (min.) 5mm 5mmoutput signal analog, 4 … 20mA (or 20 … 4mA) analog, 0 … 10V (or 10 … 0V)sound cone (angle of beam spread) 6° 6°

operating voltage 15 … 30V DC 15 … 30V DCresidual ripple 10% 10%output current (max. load) 20mA 20mAcurrent consumption (w/o load) ≤ 35mA ≤ 35mAload resistance < 400 ohm (at 15V) … < 1100 ohm (at 30V) -carrier frequency 380kHz 380kHzresolution ≤ 0.3mm ≤ 0.3mmtemperature drift ≤ 2% S (object) ≤ 2% S (object)repeat accuracy ≤ 0.5mm ≤ 0.5mmresponse/decay time ≤ 30ms ≤ 30msswitching frequency 16Hz 16Hz

display (measuring range) yellow LED / red LED yellow LED / red LEDdisplay (teach) both LEDs flash alternately both LEDs flash alternatelysensitivity adjustment teach-in button + teach-input teach-in button + teach-inputshort-circuit protection + +reverse polarity protection + +

dimensions 20x15x42mm 20x15x42mmhousing material plastic (polyester) plastic (polyester)operating temperature -10 … +60°C -10 … +60°Cdegree of protection (EN 60529) IP67 IP67

connection M8-connector, 4-pin M8-connector, 4-pinconnection accessories e.g. VK200375 e.g. VK200375mounting accessories (universal holder) AY000116 AY000116

detection range / sound cone

article-no. UT210070 UT210075version dif. reflection sensor dif. reflection sensormeasuring range 20 … 200mm 20 … 200mmoutput 4 … 20mA 0 … 10V

detection range / sound cone

ULTRASONIC SENSORS1800 DIFFUSE REFLECTION SENSORS, RETRO-REFLECTIVE SENSORS


detection range / sound cone detection range / sound cone

TECHNICAL DATAdetection range 10 … 200mm 0 … 200mmsensing range/range 30 … 200mm (reference object distance) 40 … 200mm (reference surface/reflector)output signal digital, pnp, no digital, pnp, nosound cone (angle of beam spread) 6° 6°

operating voltage 12 … 30V DC 12 … 30V DCresidual ripple 10% 10%output current (max. load) 200mA 200mAcurrent consumption (w/o load) ≤ 35mA ≤ 35mAvoltage drop (max. load) 2V DC 2V DCcarrier frequency 380kHz 380kHzhysteresis ≤ 4% S teach -temperature drift ≤ 0.18% S teach/K ≤ 2% S teachrepeat accuracy ≤ 0.5mm ≤ 1.5mmresponse/decay time ≤ 10ms ≤ 10msswitching frequency 50Hz 50Hz

display (signal) green LED green LEDdisplay (teach) LED flashes LED flashessetting (switching point) teach-in button + teach-input teach-in button + teach-inputshort-circuit protection + +reverse polarity protection + +

dimensions 20x15x42mm 20x15x42mmhousing material plastic (polyester) plastic (polyester)operating temperature -10 … +60°C -10 … +60°Cdegree of protection (EN 60529) IP67 IP67

connection M8-connector, 4-pin M8-connector, 4-pinconnection accessories e.g. VK200375 e.g. VK200375mounting accessories (universal holder) AY000116 AY000116

article-no. UT210170 UR210170detection range 10 … 200mm 0 … 200mmversion dif. reflection sensor reflective sensoroutput pnp, no pnp, no

ULTRASONIC SENSORSDIFFUSE REFLECTION SENSORS, RETRO-REFLECTIVE SENSORS 1800

9



AY000088 base module * jaw: stainless steel, ball pin galvanized / stainless steelAY000116 mounting kit for sensors Ux21 stainless steel


connection

UT210070 UT210075

UT210170, UR210170







ULTRASONIC SENSORS1800 DIFFUSE REFLECTION SENSORS, RETRO-REFLECTIVE SENSORS


P adjustable detection range

P movement-direction-dependent object detection, selectable

P sensitivity adjustment through dif. reflection sensor or optional remote control

P large range

P potential-free relay output with change-over contact

P relay decay time adjustable from 0.5 to 9s

P robust and impermeable plastic housing

P holder made of anodized aluminum

difference between vehicles and people

descriptionThe RT71 radar sensor operates in the microwave range with 24.125GHz. Depending on the configuration, the device detects all moving objects depending on or independent of the movement direction.Persons can be masked so that the sensor reacts only to vehicles. In the past, it was necessary to install induction loops in the floor for such applications. The work associated with the installation of such loops is several times greater and is more expensive than the use of this radar sensor.The device can detect very small movements. Nevertheless, it is less sensitive to rain and snow than previously available motion sensors.

The decay time of the relay can be set between 0.5 and 9s. Very simple door controls can thereby be realized without an additional time delay relay.The radar motion sensor should be installed above a gate. All parameters can be set with the aid of two push buttons that are located on the front of the sensor or by means of the optional AR000001 remote control.

application examplesu control of automatic doors and gatesu alarm systems

dimensions 127 x 102 x 97mm

dif. reflection sensors sensing range 3.5 to 7m

RADAR SENSORSRADAR MOTION SENSORS 2100

9


TECHNICAL DATAsensing range 3.5 … 7mdetection range 4 x 5m, installation height 5m detection mode movement 5cm/sinclination angle 0 … 180°Coutput signal potential-free change-over contact 42V AC/DC

operating voltage 12 … 24V AC ±10% 12 … 24V DC +30% / -10% power consumption 2Woutput current (max. load) < 1A transmitting frequency 24.125Ghz transmitting power < 20dBm EIRP 0.25mm, density: < 5mW/cm2

display (signal) red LED sensitivity adjustment 2 push buttons, remote controlshort-circuit protection + reverse polarity protection +

housing material ABS, polycarbonatedimensions 127x102x97mm operating temperature -30 … +60°C degree of protection (EN 60529) IP65

connection cable 10m accessories remote control AR000001

article-no. RT710900transmitting frequency 24.125Ghzoperating range 3.5 … 7m output potential-free change-over contact 42V AC/DC

RADAR SENSORS2100 RADAR MOTION SENSORS


connection

wire colors: bn = brown (1), gn = green (2), wh = white (3), ye = yellow (4), gy = grey (5)

terminal1 operating voltage (UB) e.g. 24V DC2 operating voltage (UB) e.g. 0V DC3 relay center contact (common contact)4 relay make contact (no)5 relay break contact(nc)

setting the detection field size

mounting height: 5msensitivity: 9inclination angle:15° ––––––––––––30° –– - –– - –– - –45° –– –– –– –– ––

mounting height: 5msensitivity: 3, 6, 9inclination angle: 30°

mounting height: 3.5msensitivity: 9inclination angle:15° ––––––––––––30° –– - –– - –– - –45° –– –– –– –– ––

mounting height: 3.5msensitivity: 3, 6, 9inclination angle: 30°

RADAR SENSORSRADAR MOTION SENSORS 2100

9


ACCESSORIESarticle-no. description

AR000001 remote control

ceiling mounting wall mounting

dimensions of the holder





RADAR SENSORS2100 RADAR MOTION SENSORS

ipf electronic gmbh Kalver Straße 25 - 27 58515 LüdenscheidGermany

Tel +49 2351 9365-0 Fax +49 2351 [email protected] • www.ipf.de

ipf vertrieb deutschland gmbhniederlassung nord Kirchenstraße 16 21224 RosengartenGermany

Tel +49 4108 4189-0 Fax +49 4108 [email protected]

ipf vertrieb deutschland gmbhniederlassung mitteRömerweg 25 58513 LüdenscheidGermany


ipf vertrieb deutschland gmbhniederlassung süd Flöschgasse 41 78647 TrossingenGermany

Tel +49 7425 94005-0 Fax +49 7425 94005-19sü[email protected]

ipf electronic gmbhexport division Kalver Straße 25 - 27 58515 LüdenscheidGermany


CONTACT

Contents catalog 2

Chapter 6

INDUCTIVE SENSORSNorm switching distancesIncreased switching distancesAll-steel sensorsAnalog sensorsHigh-temperature sensorsRing sensorsPressure-proof sensorsWelding-proof sensors

Chapter 7

CAPACITIVE SENSORSMetal devicesPlastic devices

Chapter 8

MAGNETIC SENSORSMagnetic proximity switchesCylinder sensorsMagnetic high-temperature sensorsAccessories

Chapter 9

ULTRASONIC SENSORSDiffuse reflection sensorsRetro-reflective sensors

RADAR SENSORSRadar motion sensors

Contents catalog 1

Chapter 1

OPTICAL SENSORSThrough-beam sensorsRetro-reflective sensorsHigh-performance through-beam sensors with amplifierDiffuse reflection sensors

Chapter 2

FIBER OPTIC SENSORSFiber optic amplifiersGlass fiber opticsPlastic fiber optics

Chapter 3

INTEGRATED LIGHTBARRIERSFork light barriersAngular light barriersFrame light barriersRing light barriers

LASER SENSORSThrough-beam sensorsReftro-reflective light barriersDiffuse reflection sensorsMeasuring systems

Chapter 4

CAMERA SENSORSIPF Opti-Check: Camera sensorsAccessories

SPECIAL OPTICAL SENSORSColor sensorsLuminescence diffuse reflection sensorsContrast scanners

Chapter 5

SECURITY SYSTEMSIPF SAFE: Safety light curtainsSafety relaysAccessories

Contents catalog 3

Chapter 10

FILLING LEVEL SENSORSCapacitive filling level sensorsInductive filling level sensorsConductive probesConductive filling level relaysAccessoires

Chapter 11

FLUID TECHNOLOGYPressure sensorsFlow sensorsTemperature sensors

Chapter 12

POWER SUPPLIESSwitching power supply unitsPower output stages

Chapter 13

EVALUATION SYSTEMSMulti-function countersPulse countersElapsed-time countersTime-delay relaysMeasuring transducersMonitorsCoupler relays

Chapter 14

ACCESSORIESCable sockets DistributorsLogic modules Signal invertersSensor tester Fixing materialMechanic tappets Reflectors

Chapter 15

LINEAR MEASUREMENT SYSTEMSMagnetic linear measurementEncodersAccessories

If you want 110%.

catalog - ipf electronic · 2019. 5. 20. · ipf electronic gmh alve te - 7 8 densced en _ te 9 96-...

Documents