catalog - fastronix solutions 2012a.pdf · multi pack new products hi-amp master fuse kit install...

24
www.fastronixsolutions.com Catalog Trucks Marine Street Rods Trailers Racecars Off Road Performance Automotive Electrical Wiring Components RV's Street Machines ® Fastronix Solutions © 1 2012A

Upload: trinhxuyen

Post on 10-May-2018

213 views

Category:

Documents


1 download

TRANSCRIPT

www.fastronixsolutions.com

Catalog

Trucks

Marine

Street Rods

Trailers

Racecars

Off Road

Performance Automotive Electrical Wiring

Components

RV's

Street Machines

®

Fastronix Solutions © 1 2012A

www.fastronixsolutions.com

~ 4 ~ 15~ 4 ~ 15~ 4-5 ~ 16~ 5 ~ 17~ 5~ 6~ 6 ~ 18~ 6,8 ~ 18~ 7 ~ 18~ 7 ~ 19~ 8 ~ 19

~ 19~ 20

~ 9,10 ~ 20~ 10 ~ 21~ 11 ~ 21~ 11 ~ 21~ 12 ~ 21~ 12 ~ 22

~ 13 ~ 23~ 13 ~ 23~ 14 ~ 24~ 14 ~ 24

Disclaimer:All technical information and recommendationsrelated to the Fastronix product line are basedupon information believed to be correct, but theaccuracy and completeness thereof is notguaranteed. Before using a product the Usershould determine the suitability of the product for itsintended use. Fastronix products are intended foroff road use only. Since Fastronix cannot controlthe use of its products after their sale the Userassumes all risks and liability in connection withsuch use.

Insulated Ring Terminals ----------------------

Terminal Products

LED Indicators ------------------------------------

Relay Panel----------------------------------------High Power Relays ------------------------------

Catalog ContentsBattery Power Accessories

Relay Devices

Battery Cable -------------------------------------

Push Button Starter Switch --------------------

Split Loom Tubing -------------------------------

Power Junction Blocks -------------------------

Heat Shrink Tubing ------------------------------

Grommets / Bushings ---------------------------

Power / Ground Distribution Blocks ---------Multi-Stud Junction Blocks --------------------

Fuses -----------------------------------------------

Cable Ties -----------------------------------------

Heat Shrink Terminals --------------------------

Circuit Breakers ----------------------------------

Molded Connectors -----------------------------

Wire Splices ---------------------------------------Quick Connect Terminals ----------------------

Wiring Accessories

Cable Clamps -------------------------------------

Circuit ProtectionFuse Blocks / Panels ---------------------------

Terminal Strips -----------------------------------

Fuse Holders --------------------------------------

Weather Pack Connectors --------------------

Heavy Duty Heat Shrink -----------------------

Relay Sockets ------------------------------------

Terminal Covers ---------------------------------Battery Disconnects -----------------------------

Solenoids ------------------------------------------

Engine Ground Strap ---------------------------

Lighted Switch Panels --------------------------

Automotive Relays ------------------------------

Copper Lug Ends --------------------------------

Switches

Welcome to Fastronix SolutionsYour complete source for performance electrical wiring components for aftermarket applications.In your hands is our latest offering in our ongoing quest to provide you, the end user, solutions toyour electrical wiring dilemma. After browsing through the Fastronix Solutions extensive line ofunique and hard to find wiring components, you'll be excited with a newfound confidence to tacklethat wiring project you’ve put on the back burner. So whether you’re going On-track or Off-road,do the job right and keep the current flowing with Fastronix Solutions Components .

Battery Cable Ends ------------------------------

Battery Jumper Terminals---------------------

Battery Quick Connector-----------------------

Trans Brake Switch and Cord----------------

Weather Pack Tools ----------------------------

Wire--------------------------------------------------

Toggle Switches ---------------------------------

Premium Lighted Rocker Switches ---------- High Temp Sleeving ----------------------------

Fastronix Solutions © 2 2012A

www.fastronixsolutions.com

NEW PRODUCTS

Hi-Amp Master Fuse KitInstall between battery andvehicle to protect yourvehicles entire electricalsystem from catastrophicmeltdown. Features fourmounting holes and 5/16"studs. Includes 250 ampfuse, holder, and cable bootcovers.

#500-040Spare Fuse #501-149

RPM Selector Switch

Use in place of RPM Chips. EachRPM Selector has a 1200 RPMrange and adjusts in 100 RPMincrements. Selector modules areavailable in RPM ranges from 2000to 9000 to meet your exact needs.Adjust quickly and accurately with aturn of the knob.

Above #650-002See full details atfastronixsolutions.com

Black

#152-020

Quick Release

Trans Brake Switch #302-100

Universal remote push button and spiral cord. Ideal forbracket racing, designed for use with transbrake, launchcontrol, and nitrous systems. 18 ga cord stretches to 60"Works with 12 and 16 volt systems. Rated 12 amps.

Toggle Switch

Multi PackPackage of 3 heavy dutytoggle switches. SPSTswitches with screw terminalsand includes On/Off plate.Rated for 20 Amps. #300-310

High Power Continuous Duty

SolenoidUse for battery switching or otherapplications that require highcurrent demand. This continuousduty solenoid is for 12 voltapplications an is rated for 200amps. Features isolated groundcase 4 wire design with 5/16" input/output studs.

Fastronix "T" ShirtsGet your Fastronix Solutions T-Shirt,available for a limitedtime. Features 100%cotton with the red andblack Fastronix logo onfront and large logo onback.

Available in M, L, XL, and 2XL

10 Gauge Race Wire

20' coil of 10 gauge cross-linkedautomotive race wire. Rated hightemp to 257F Resists oil andabrasions. Use in high currentautomotive applications.

#201-102

Red

#152-220

Fastronix Solutions © 3 2012A

www.fastronixsolutions.com

3/8"1/2"3/8"1/2"405-010

405-002 (qty.2)405-009 (qty.2)405-006

405-007

405-102 (qty.2)

Simple Installation

405-008405-011

405-109 (qty.2)405-108405-103

100'4 - Black

#404-021

Battery Cable Compression Connectors

405-105

Gauge

#132-225 #132-025Length

#4 25'

Battery CableHeavy duty PVC jacketed multistrand copper battery cabledesigned for automotive and marine use. This cable ismanufactured to SAE specification J1127-SGT and is available ineither 2 or 4 gauge in lengths of 25 or 100 feet.

BlackGauge

#133-225

#404-020

405-111405-110

Right Elbow

405-003Positive

100' #132-200 #132-000

#4

2 - Red & 2 - Black

#404-0014 - Red

Straight405-107

Flag

Red

Lug EndsNegative

Left Elbow

Positive 405-104

Red

#133-425

Quality copper battery compression fittings make it easy to build custom

length battery cables for any application.

405-004405-005#1&2 Negative

Post

405-106

#2Super Flex

CablePremium neoprene jacketed super fine stranded copper batterycable. Perfect in tight battery applications or where cable flexibilityand high cranking amp power output is important. Available ineither 2 or 4 gauge.

Black

#133-025100' #133-200 #133-00025'

#132-400 #132-300

#133-300#133-325

Gauge Length

#2 25'100'

#4#133-400

#132-42525' #132-325

Battery Cable Heat Shrink

Extra heavy duty heat shrinkfeaturing a thick adhesive inner wallwhich melts as tubing is shrunkaround cable and fitting tocompletely seal battery cableconnection. Shrinks down 3:1.Packaged in 4 packs of red orblack. Pieces are 3/4" X 1-1/2" .

Battery Accessories

Fastronix Solutions © 4 2012A

www.fastronixsolutions.com

Ga. Hole#4 5/16"#4 3/8"#2 5/16"#2 3/8"

Angle Gauge

#2#4#2#4

#405-022

#405-023

Battery Terminal Covers

Use for a professionallooking installation and toprotect battery terminal endsfrom corrosion and shorting.Set includes 1-Red & 1-Blackand will fit up to 1/0 gaugebattery cable.

Battery Accessories

Military Battery Connectors

Angled Copper

Lugs

#405-017#405-114#405-016

45d

Battery Washers

#405-024

Copper Lugs

#405-112#405-113

Part #

POS. Flag

Straight

#405-0303/8" Lugs (pair)

Fastronix anti-corrosion batterywashers neutralize battery acid andprevent battery terminal corrosionand acid corrosion around battery.Install under each battery cableterminal. Will work on both top andside post batteries. (4-pack)

#404-200

#405-031

45 degree lugs

NEG. Straight

#404-100

#405-115

Flag Style

#405-116

No Crimping required. Simple to use battery cable ends for1 & 2 gauge cable. Each connector barrel is pre-loaded withflux and solder. Just heat barrel with a propane torch orother heat source and insert battery cable for a perfectconnection. Made from cast copper for super conductivityand come polarity specific for a secure fit. Available instraight, flag and lug end styles.

#405-013#405-012

3/8" hole#405-015

Lug Ends

#405-117

#405-014

Heavy duty copper lugs.Flared end for easy cableinsertion. Can be crimpedor soldered. For # 2 or # 4gauge cable. Available in4 packs.

#405-911

Tinned angled lugs.Use for starters or intight areas. Available in45 deg. or 90 deg.Crimp or solder.(2 per package). 90d

POS. StraightNEG. Flag

#405-029 1/2" Lugs (pair)

5/16" hole

Pre-Soldered Battery Connectors

Use in dual or multiple batteryconfigurations to simplify batterycoupling. Standard battery cablelug ends are easily installed orremoved through long 3/8" bolt.Polarity specific lead construction.

Positive Terminal

#405-910Negative Terminal

Fastronix Solutions © 5 2012A

www.fastronixsolutions.com

#404-111

Battery Jumper

TerminalsPremium remote batteryterminal pair. Maintainscomplete access to batteryfor quick charging or jumpstarting. (1-red,1-black)

#406-225

Remote Battery

Terminals

#406-220

Remote Starter Solenoid

These terminal boots can beused with stud type junctionblocks to protect againstaccidental shorting andcorrosion while improvingappearance. Available inpairs in red or black.

Red

#404-110

Can be mounted away fromexhaust heat ensuring solidstarts. Route main batterycable away from headers andavoid potential fire hazard.Connect 12V accessoriesdirectly to solenoid. Allows forquick and easy starterswaps. #201-105

Battery Accessories

Black

#930-301

Battery Switch Kit

Everything you need for a professional installation

Sealed battery disconnect switchwith aluminum On/Off face plate.Switch rated for 180 Ampscontinuous duty or 1000 Ampsintermittent. Meets requirements ofNHRA and SCCA.

Kit includes 180 Amp masterdisconnect switch (standard or twopole for alternator shut-off), on/offplate, pair of #2 3/8"copper lugs,H.D. heat shrink to seal connectionsand a pair of rubber terminalinsulators to cover studs andprevent shorts.

#930-300Standard Disconnect Kit

2-pole Disconnect Kit

Unique one piece designedterminal block allowscomplete access to bothbattery terminals for easycharging or jumpstarting.Middle safty plate preventsaccidental shorts.

Four post switch for disconnectingalternator or other electrical devicein addition to battery. Features 3/8"studs rated for 180 ampscontinuous duty and 10-32 studsrated for 20 amps. Includes On/Offface plate and wiring diagram.

Stud Terminal Covers

#303-001 #303-002

Double Pole Disconnect

Switch

Master Disconnect

Switch

Fastronix Solutions © 6 2012A

www.fastronixsolutions.com

Pass Thru Junction

BlockFirewall pass throughjunction block. Glass fillednylon construction withmounting holes. 3/8" studs,nuts included. Rated 250Amps.

Black #406-201

Red #406-203

#405-900

Quick Connect

Cover

#405-001

Use with #4 or #2ga cable

Side Terminal Battery

Power TapThis brass adapter can be used to obtain power directlyfrom your side post battery. The adapter secures batterycable and provides a 5/16" stud for easily connectingadditional power accessories. Includes ring terminal.

#401-201

Red connector cover forFastronix Solutions #401-200battery connector kits. Sealsand protects terminals whennot in use. One per package.

Power Junction

Block3/8 Black #406-200

Kit includes 1-conn. body and 2-tips

#401-200

Red #404-110Black #404-111

Battery Accessories

Stud Terminal Covers

These terminal boots can beused with stud type junctionblocks to protect againstaccidental shorting andcorrosion while improvingappearance. Available inpairs in red or black.

Single stud power junctionblock. Nylon constructionwith mounting holes. Can beused for power or grounddistribution. Available in redor black 3/8" or 5/16" stud.

3/8 Red #406-2025/16 Black

Battery Quick

ConnectUse for high powerconnections or quick jumpstarts. Easy to use prefluxedand soldered tips. Just heatwith an lp torch and yourdone. No crimping required.

#406-2045/16 Red #406-205

Thru-Panel Battery Feed

Installs easily in a 1-1/4” hole toprovide a positively isolated batteryfeed through terminal connection.Two 3/8"-16 brass stud terminals,5/8" long.

Fastronix Solutions © 7 2012A

www.fastronixsolutions.com

Remote Starter Solenoid

#201-105

24" #190-001

#201-103

13" #190-000

High Power Continuous Duty

SolenoidUse for battery switching or otherapplications that require highcurrent demand. This continuousduty solenoid is for 12 voltapplications an is rated for 200amps. Features isolated groundcase 4 wire design with 5/16" input/output studs.

Can be mounted away fromexhaust heat ensuring solidstarts. Route main batterycable away from headers andavoid potential fire hazard.Connect 12V accessoriesdirectly to solenoid. Allows forquick and easy starterswaps.

Use for switching any high currentapplication or solution for batteryisolation in dual batteryconfigurations. Rated for 12Volt85Amp. 5/16" studs on input andoutput. (Includes wiring diagram).

#201-102

Continuous Severe Duty

SolenoidOur highest rated continuous dutysolenoid at 225 Amps. This heavyduty solenoid can be used in manyHD applications including, batterydisconnect, alternator shut downand battery isolator. 12VDC

Latching SolenoidContinuous duty solenoid uses alatching coil. Apply 12V to the coilthrough a momentary push buttonto turn solenoid ON or OFF. Due tothe latching operation, solenoid willnot heat up or drain battery when inuse. Great for a battery disconnectswitch or battery isolator. 12VDCRated 110Amps #201-110

Battery Disconnect

#201-101 (case gnd)

Continuous Duty

Solenoids #201-100 (4-wire)

Ground Strap

Excellent for grounding engine andframe together and will give extraprotection on computer controlledvehicles. Heavy duty 4 gaugebraided cable with 3/8" lug endsavailable in 13" or 24" lengths.

Battery Accessories

A simple turn of the knobquickly disconnects batteryvoltage for maintenance orsecurity. For top postnegative battery terminal.

#303-000

Fastronix Solutions © 8 2012A

www.fastronixsolutions.com

Switches

Switch with Safety Cover

Heavy-duty SPST (on/off) toggleswitch with red aircraft switchguard. Use for Ignition switch orwherever an actuation protectedswitch is needed. Toggle switchhas screw terminals and is rated for20 amps @ 12V

SPDT ON/OFF/momON

#300-230

#300-233

#300-235

#300-231#300-232

Description

#300-211 SPST Momentary

Part ##300-210 SPST ON/OFF

#300-234

#300-213

Heavy duty toggle switch withweatherproof neoprene boot.Boot screws on and keepsout dirt and moisture. SPSTswitch features screwterminals and includesON/OFF plate. Switch israted for 20 amps.

#300-301

Switch with Boot

Available in a variety ofconfigurations for manyapplications. Rated 21 Amps@ 14 Volt. Includes .250 female quick connect crimpterminals. Requires 1/2"mounting hole.

DPDT ON/ON

SPDT ON/ON

#300-215

SPDT Center Off

Description

Toggle Switch

Multi Pack

SPDT ON/ONSPST Momentary

Toggle Switch Boot

Part #

SPDT Center Off

DPDT Center Off

#300-212

#300-310

Package of 3 heavy dutytoggle switches. SPSTswitches with screw terminalsand includes On/Off plate.Rated for 20 Amps.

#300-201

Package of 2

Toggle Switch Safety Cover

Prevent accidental actuation withthis rugged safety cover. Springloaded design with red cover. Easyto install. For use with most on-offmetal toggle switches with standard15/32" mounting stem.

#300-200

Tough silicon weatherproofswitch cover screws on toFastronix toggle switches toprotect and seal switch frommoisture, dust and dirt.

Sealed Toggle

SwitchesSPST ON/OFF

Moisture and dust resistantneoprene-sealed togglesoffer complete protection inharsh enviroments. Rated 21Amps @ 14 Volt and featurescrew terminals. Requires1/2" mounting hole.

#300-214

DPDT Center Off

Heavy Duty Toggle

Switches

#300-300

Fastronix Solutions © 9 2012A

www.fastronixsolutions.com

Replacement boot.Screws on to startswitch to protect fromdirt and moisture

#305-009

#305-001

Heavy-duty momentary push button switch with neoprenecap for extra protection against dust and moisture. Flushterminal screws. 5/8” diameter mounting stem. Silvercontacts rated at 60 Amps at 12 Volts.

Chrome Bezel GuardScrews on to startswitch to protectagainst accidentalactuation.

#305-008

Switches

Push / Pull Switch

Starter Switch

Heavy duty momentary pushbutton switch with chromesafety bezel for extraprotection against accidentalswitch actuation. Flushterminal screws. 5/8"diameter mounting stem.Silver contacts rated at 60Amps at 12 Volts.

Amber Glow

#301-300

Heavy duty push/pull switchcan be used for lights orother accessories. Featureschrome knob, copper screwterminals and a diecast base.High current rating of 75amps @ 6-28 volts DC.

#301-201

#305-030

Neoprene CoverBlk. Non-illuminated

Green Glow#301-303#301-304

#301-302#301-301 Red Glow

ColorPart #

Mini Rocker Switches

Mini snap-in single pole (on/off) rockerswitches. The #301-201 features a redvisible indicator when switched on. Switchsnaps into a standard size hole (.480 by1.072). Rated 8 amps at 14 volts. Has1/4" male tab terminals. Package of 2.

#300-111

#305-003

LED Toggle Switch

Blue Glow

Easily mount in a 1/2" hole.Available in standard black orfully illuminated in a variety ofcolors. SPST switch rated 12volt 30 amp with 2 or 3 1/4"terminals. (Package of 2switches)

Start Switch with Bezel

#300-110Red -

Green -

Round Hole Rocker

Switches

Blue -

Black toggle handle tippedwith a bright LED indicator.Available in Red, Green orBlue. Perfect for automotiveapplications. Requires 1/2"mounting hole. Switch has1/4" tab terminals and israted for 30A/12V DC. #300-112

#301-200

Fastronix Solutions © 10 2012A

www.fastronixsolutions.com

SPTT off/on/on

Specialty Rocker

SwitchesQuality sealed commercialduty rocker switches. Can beused with the Fastronixrocker switch panels. Ratedfor 20 amps @ 12 volts. Redindicator(s). Mounting hole7/8"x1-1/2".

* No indicator on #301-120#301-120 - SPST Momentary

#301-124 -

Rocker Switch Sockets

Simplify wiring to Fastronix lightedrocker switches and switch panels withthese easy to use connectors. Socketsare available pre wired or in kit form forcustom installations. Sockets lock on toswitch bodies for a secure connection.Pre wired sockets features 3-14ga 12"leads. Socket kits contain connector bodyand 4 terminals.

Pre-Wired #301-115

Socket Kit #301-116

SPDT center off#301-125 - DPDT center off#301-126 -

#930-044 4-1/8" x 1-7/8"For quick wiring use with pre-wired switch sockets

Fastronix # 301-115 or #301-116..

Four Color Switch Panel #930-060

Features Fastronix premium lighted rocker switches withred, amber, green, and blue indicators. Use a different colorfor each accessory. Rockers rated for 20 amps @12 VDCand have 1/4" male terminals.

Start-Ignition Switch Panel

Red #930-015Two switch panel featureslighted rocker switch forignition and a momentaryrocker for starting. Can alsobe used as a nitrousArm/Purge switch panel.

4 Green #930-034 4-1/8" x 1-7/8"4 Amber #930-024 4-1/8" x 1-7/8"4 Red #930-014 4-1/8" x 1-7/8"3 Blue #930-043 3-1/16" x 1-7/8"3 Green #930-033 3-1/16" x 1-7/8"3 Amber #930-023 3-1/16" x 1-7/8"3 Red #930-013 3-1/16" x 1-7/8"

Green #930-032 2" x 1-7/8"2 Blue #930-042 2" x 1-7/8"

Switches

Amber #930-025Green

22

#930-0211 Amber

#930-041

1" x 1-7/8"1 Green #930-031 1" x 1-7/8"

1" x 1-7/8"2 Red1 Blue

#930-035

Amber #930-022

Blue

#301-121Quality sealed commercialduty automotive/marinerocker switch. SPST 12 voltswitch rated for 20 Amps.Indicator lights when on. 1/4"male terminals. Snaps into a.083" x 1.45" hole.

Amber #301-122Green #301-123Blue #301-127

Lighted Rocker

SwitchesRed

Rocker Switch Panels

Switches Lens Part #

#930-012 2" x 1-7/8"2" x 1-7/8"

Blue #930-0454

Mounting1 Red #930-011 1" x 1-7/8"

Fastronix Solutions © 11 2012A

www.fastronixsolutions.com

Reversing Momentary

SwitchDPDT momentary rocker switch.Use for door locks, power windows,winches or for reversing control ofmotors. Mounting size 7/8"x1-3/16".Rated 21A @12VDC. 3/16" maletab terminals. #305-020

Amber

Switches

Quick Release

Trans Brake Switch

Universal remote push button and spiral cord. Ideal forbracket racing, designed for use with transbrake, launchcontrol, and nitrous systems. 18 ga cord stretches to 60"Works with 12 and 16 volt systems. Rated 12 amps.

Door Switch

#305-002

Grounding style pin switchpair, for hood, trunk or doors.Use to control lights alarmsor accessories. 5/16-18threads with bullet crimpterminals. Use with relay toswitch (+) 12V.

Green

#304-002

Available in pairs - red, amber or green

Red

#304-003

#304-006

#304-007

LED bright indicator lightsavailable in red, amber orgreen. Featuring chromehousing with nut and locknutand 3" wire leads for 12VDC.7/16" mounting hole.(Packaged of 2)

#304-005

Amber

Jumbo LED bright indicator lightsavailable in red, amber or green.Featuring chrome housing with nutand locknut and .250 male tabs foreasy connections. 12VDCapplications. Requires 7/16"mounting hole. (Packaged of 2 with.250 female crimp terminalsincluded) Green

Red

LED Indicators

#302-100

Jumbo LED Lights

#304-001

#302-001

Momentary Push Button

SwitchNormally open push button switchwith screw terminals. Mounts instandard 1/2" hole. Use formomentary action of lights oraccessories. 6 amp rating.

Universal keyed ignition switch with 4 position pattern, (Acc -Off - On - Start). 10-32 stud terminals. Mounting stem 7/16"long, with a 3/4" diameter. Rated to 15 amps. Use withrelays for higher output current capabilities

#305-010

Universal Ignition Switch

Fastronix Solutions © 12 2012A

www.fastronixsolutions.com

Tyco OEM Relay

TYCO Electronics heavy dutySPDT automotive relay. OEMon many applications. Plastichousing with mounting tab.30 amp.

#201-002

#201-001

Relay Devices

Weatherproof Automotive 40

Amp Relay

12VDC SPDT automotive relay with40 amp contacts. This relay issealed for use in exterior or damplocations. Features plastic housingwith metal mounting bracket. Usefor switching high currentaccessories.

Relay Socket Kit

#201-003

Build your own custom relaysockets for automotive typerelays. Includes socket, fivepush in locking crimpterminals for 16-14ga. wireand relay wiring diagram.

#200-010

Relay Socket

12 Volt SPDT Bosch typeautomotive relay. 30Ampcontacts. Plastic housing withmounting tab. Use forswitching high currentautomotive accessories.

Automotive Relay

Interlocking Relay Socket

Kit

Build your own custom relaysockets for automotiverelays. Includes interlockingsocket, five push in lockingcrimp terminals for 16-14ga.wire and relay wiringdiagram.

AutomotiveRelay

#200-001

Prewired relay socket for usewith Bosch type automotiverelays (Fastronix # 201-001).Features five 14gauge multi-colored 12" leads and aregangable. Includes wiringdiagram.

and

#200-015Multiple sockets interlock.

Socket#900-000

12V SPDT 30 amp relay and prewired socket with 12"leads. Many uses include controlling fuel pump, waterpump, fans, or any other high current accessory. Diagramincluded.

Fastronix Solutions © 13 2012A

www.fastronixsolutions.com

Relay Panel

This four relay and socket panel canbe used for switching your high currentwater pump, cooling fans, fuel pumpand lights. Each 30 Amp relay featuresits own pre-wired socket for easywiring. Relays can be separated andused individually or ganged together inany configuration.

Continuous duty solenoid uses alatching coil. Apply 12V to the coilthrough a momentary push buttonto turn solenoid ON or OFF. Due tothe latching operation, solenoid willnot heat up or drain battery when inuse. Great for a battery disconnectswitch or battery isolator. 12VDCRated 110Amps #201-110

Latching SolenoidContinuous Duty

Solenoids Use for switching any high currentapplication or solution for batteryisolation in dual batteryconfigurations. Rated for 12Volt85Amp. 5/16" studs on input andoutput. (Includes wiring diagram).

#201-100 (4-wire)

For high current switching.Example, connect to ignitioncircuit to control or shut downpower circuits, accessories orfuse panels through ignitionswitch. SPST dual contactsrated for 75 amps.

High Power Relay

#900-004

Relay Devices

#201-101 (case gnd)

#201-020

#201-103

High Power Continuous Duty

SolenoidUse for battery switching or otherapplications that require highcurrent demand. This continuousduty solenoid is for 12 voltapplications an is rated for 200amps. Features isolated groundcase 4 wire design with 5/16" input/output studs.

#201-102

Continuous Severe Duty

SolenoidOur highest rated continuous dutysolenoid at 225 Amps. This heavyduty solenoid can be used in manyHD applications including, batterydisconnect, alternator shut downand battery isolator. 12VDC

Fastronix Team 1971 Chevy Vega

Fastronix Solutions © 14 2012A

www.fastronixsolutions.com

AMP351015202530

#500-010

8 Fuse Panel

10 Fuse Panel

Multi-Circuit Fuse Panels#500-011

Covered Fuse Block

6 circuit ATO/ATC fuse blockwith attached 8 ga. powerlead with ring term., screwterminals, and cover.Includes mounting screwsand crimp terminals. Rated65 amp total all branches.

Circuit Protection

#501-101

Fuse Kit

#501-106

ATO/ATC automotive fuseassortment. Contains a totalof 15 fuses, 3 each of thefollowing values 5, 10, 15, 20and 30 amp.

Green

Fuses not included

Automotive Fuses ATO/ATC Blade Type

TanRed

#501-104Blue

Multi-circuit 150 amp auxiliary fusepanels for simplification of wiring, usestandard ATO/ATC blade style fuses andfeatures a #10-32 input stud, fuseprotected 1/4” output tabs and 4 recessed mounting holes. Available in 6,8,10 and12 circuit panels. 30amp max/circuit.Includes crimp terminals.

This is a complete assemblyfor ATO/ATC type bladefuses. Units can be snappedtogether to gang for multiplecombinations. Includes 8-inch leads of 12 ga. wire.Mounting holes for #10screws are 3-1/8” apart.

4 Circuit Fuse Block

Kit

Natural

Color

#501-105

Package of 5#501-100

#500-0036 Fuse Panel

#500-006

#500-004#500-005

10 Fuse Panel #500-005

#501-109Yellow

#501-103#501-102

Violet

12 Fuse Panel

#500-009

Fuse Block4 Circuit

ATO/ATC fuse block withmounting holes. Multipleunits lock together foradditional circuits. Includesbrass terminal strip and 4individual terminals. 50 ampmaximum total all circuits.

Fastronix Solutions © 15 2012A

www.fastronixsolutions.com

Maxi Fuse Holder

#501-124

Weatherproof Fuse Holder

#500-020

Maxi holder with cover and 50A fuse

#500-001

Premium sealed ATO/ATCautomotive fuse holder.Features locking cover withmounting tab and 8" 12 ga.leads. Great for under thehood applications. 30 ampmax.

Fuse not included

#500-000

80Amp

70Amp

Circuit Protection

60Amp

#501-126

#501-123

In-Line Fuseholder

One pair of in-linefuseholders for standard1-1/4" AGC style fuses.Holders have 18 gaugeleads. (fuses notincluded)

40Amp #501-122 ATO/ATC

Fuseholder

Perfect for protecting themain battery feed to yourfuse panel, high currentaccessories or alternatoroutput. Use in place of thoseold fusible links. Featuresweather resistant cover, 7"long #8 ga. leads and 50Amp maxi fuse.

Heavy duty in-line fuseholderwith cover for automotiveATO/ATC style blade fuses.10 gauge leads for up to 30amp rating. (fuse included).

#501-125

Maxi Fuses

#500-002

50Amp

Install between battery andvehicle to protect yourvehicles entire electricalsystem from catastrophicmeltdown. Features fourmounting holes and 5/16"studs. Includes 250 ampfuse, holder, and cable bootcovers.

#500-040Spare Fuse #501-149

Hi-Amp Master Fuse Kit

Fastronix Team 1970 Dodge Challenger

Fastronix Solutions © 16 2012A

www.fastronixsolutions.com

Panel Mount Circuit Breakers

#502-15220

#950-0034 - 30 Amp Circuit Breaker Panel

Design your own circuit protectedswitch panel with these easy to usepanel mount circuit breakers.Features include push buttonmanual reset, 1/4" push onterminals and the necessaryhardware to mount in a 7/16" hole.Available in four amperage ratings.

Circuit Breaker CoversFor a professional installation usewith Fastronix inline circuitbreakers. Protects from theelements and prevents accidentalshorting. Secures to circuit breakerstuds. Features side cutouts toallow for terminal connections.Package of 2 (red). #502-140

#502-103#502-102

Circuit Breakers

#502-101

40

Circuit Protection

10

15

#502-151

#502-10530

10 Amp

Simplify many automotive wiring projects withthese 4 gang circuit breaker panels featuringautomatic resetting circuit breakers, 10-32 studterminals, common input bus bar and all metalmounting bracket. Available in multipleconfigurations for 12 volt dc applications.

Circuit Breaker Panels

4 - 10 Amp Circuit Breaker Panel #950-002

4 - 20 Amp Circuit Breaker Panel

#502-163 20 Amp

#950-001#950-000

#502-164

2 -10 Amp & 2 -20 Amp CB Panel

Automatic reset circuitbreakers, use for circuitprotection in many 12 voltapplications. Featuresinsulated plastic housing, in-line mounting tabs and 10-32stud terminals. Standardautomotive Type I.

Amps

20

Rating

Fastronix

#502-15315

#502-161

#502-155

30 Amp

15 Amp

Amps

Fastronix Team 1969 Plymouth Fury III

#502-162

Circuit Breakers

Heavy duty replacement forATO/ATC blade style fuses.Tabs can be snapped off tothe required length. Thesebreakers will remain openuntil trouble is corrected orpower is removed. 12 volt DConly.

Fastronix

#502-106

10

30

Part #

Fastronix Solutions © 17 2012A

www.fastronixsolutions.com

Wiring Accessories

#406-304-

Terminal Strip KitsUse to eliminate splicing and simplify manyautomotive wiring projects. Both terminal kits contain3 quality double row terminal blocks (4,6 and 8position) with 6-32 screws. The #940-200 kit includes(40) 16-14 gauge nylon double crimp ring terminalswhile the #940-201 kit includes 20 1/4" push on tabs(10-45deg.&10-flat) to enable the use of 1/4" quickdisconnects. #940-200 #940-201

The best way to properly groundall your electrical devices.Features a 1/4-20 input stud ona nickle-plated bus bar with 12stainless steel terminal screws.Also includes premium nyloninsulated ring terminals.

#406-211

Multi-Stud Junction

Block Kits

This common bus brass terminal strip is the best and rightway to create a ground circuit for your dash area oraccessories. Has (10) 8-32 screw terminals and (2) 1/4-20supply studs on an insulated base with mounting holes.

Useful in a wide variety ofautomotive electrical wiringapplications. Feature #10-32brass studs and include nuts,lock washers and premiumnylon double crimp ringterminals.

Ground Terminal

Block

Give your wiring a professional lookwith this enclosed stud terminaljunction box featuring 10-32 studs,five open, five closed grommetsand all necessary hardware. Idealfor trailer wiring.

8 stud block, hardware and 20 ring terminals

#406-212

#406-308-

Power Terminal

BlockProvide power to all yourelectrical devices. Features a1/4-20 input stud, nickle-platedbus bar, 12 stainless steelterminal screws, protectiveinsulator cover, stud terminalboot, and includes nyloninsulated ring terminals

Ground Terminal

Strip

#406-310

#406-210

7 Terminal Junction Box

4 stud block, hardware and 10 ring terminals

#406-306- 6 stud block, hardware and 15 ring terminals

Fastronix Solutions © 18 2012A

www.fastronixsolutions.com

1-Pin2-Pin Red3-Pin 20-18 Green4-Pin 16-14 Gray6-Pin 12-10 Blue

Weatherpack Pin Tool

A must have tool for removing pins from weatherpackconnectors. Allows you to reconfigure connector just in caseyou make a mistake or want to re-use connector. Simplyslide over terminal pin and pull wire out.

#600-001

#401-005

#401-002

Spark plug wire die set

#600-003

Fastronix sealed connectors provide superiorweather protection and is the preferred choiceof many top Race Teams. The silicone gasketsand precision construction make for a weatherresistant severe duty connection. Mates directlywith the Deutsch DT series connectors. Kitsinclude all necessary parts and detailedinstructions. 14-16 gauge pins. 13 amp/pin.

Wiring Accessories

4-Pin Kit - #401-154

8-Pin Kit - #401-158

Molded connectors feature a12" loop with 16 gauge wire.Just cut loop and splice touse as a quick disconnect forelectrical accessories.

Sealed Deutsch Style Connectors

2-Pin Kit Shown Above

2-Pin Kit - #401-1523-Pin Kit - #401-153

Weather Pack Crimp Tool

12-Pin Kit - #401-162

Molded Loop Connectors

#401-003

#401-117#401-113

#600-002

#600-001

#401-001

#401-004

#401-115

#401-006

Crimps most weather packterminals and open barrel non-insulated connectors 22-10AWG. Ratchet action ensuresperfect crimps. Features steelframe, contoured grips and theability to change dies. (Alternatedie sets available separately)

#401-001 shown (2-wire) #401-008

5-Wire4-Wire sq.

8-Wire

#401-104

(5-male & 5-female)#401-102

#401-106

1-Wire2-Wire

Weather Pack

Weather Pack Pin Removal tool#401-116

#401-114

3-Wire

6-Wire

Replacement Pins

Connector KitsWire like the pros with these lockingweather pack connector kits. Siliconeseals protect against dust, dirt andmoisture and ensure a fail-safeconnection. Connector kits are availablein one through six pin configurations andinclude, connector bodies, male andfemale 16-14 gauge terminal pins andgreen seals.

Connector Kits

4 Pin Connector Kit #401-104

#401-111#401-112

Wire Seals (10pack)#401-101

#401-103

Weather Pack

6-Pin Kit - #401-156

Fastronix Solutions © 19 2012A

www.fastronixsolutions.com

1/4" 3/8" 10 Hole3/8" 1/2" 10 Size5/8" 3/4" 6 5/8

3/41-1/81-1/2

1/8" 1/4" (10)

3/16" 5/16" (10)1/4" 3/8" (10)

5/16" 7/16" (10)3/8" 1/2" (10)1/2" 13/16" (6)5/8" 7/8" (6)3/4" 7/8" (6)

#403-207

#403-103

Push mounts in a 1/4" hole

#403-001 (pkg of 10)

#403-101 #403-201

#403-215#403-113

#403-000 (pkg of 6)

#403-740#403-736

#403-732#403-733#403-734#403-735

#403-731#403-730

Rubber Grommet

AssortmentSize I.D. Part # Mnt.

Hole Qty

Wiring Accessories

Yellow

GreyPurple

These quality nylon tiesare available in avariety of colors tomatch any job. The 4"ties have a 18lb.strength rating and the7-1/2" ties have a 50lb.strength rating.

Neon Grn.

Black

#403-107#403-208

4-way adhesive backed /screw mount

Color 4" (pkg.50)

#403-100

RedBrown

#403-202

#403-206#403-204

(10)-1/4" (10)-3/8" (10)-5/8"#403-723#403-710

#403-704 .18 -.31 (qty.2)

#403-203

7-1/2" (pkg.40)

#403-200

#403-213#403-115

Orange

#403-720

Blue

Mount Hole

#403-104

#403-722

Much better then standardgrommets. Use as a firewallfeed-through bushing forwires and cables. Fittingwhen tightened locks ontowires or cable providingstrain relief protection as wellas a water tight seal.

Weatherproof Grommets

Secure cabling with these cable tie bases. Choose from theadhesive backed base or the nylon push mount base.

Cable Tie Bases

#403-102

.45 -.70

.59 -.99

.27 -.45 (qty.2)

#403-106

#403-702#403-701

#403-108

Nylon Cable Ties

Neon Pk.Neon Org.

#403-112 #403-212

Fastronix Bushing I.D.

Range

#403-721Snap Bushing Assortment

Quanity per pkg.

Use these in the firewall orwherever wiring is passingthrough panels to eliminatesharp edges and to protectwires and harneses. Snapsinto standard holes andallows easy pulling of wiresdue to their nylonconstruction.

Snap-In Bushings

Cable Dia.

Part #

#403-737

Protect wiring routed throughpanels with this 18 piece rubbergrommet assortment. Kit contains(5)-3/16", (5)-1/4", (5)-3/8", (1)-1/2",(1)-5/8" and (1)-3/4" (grommet sizeis I.D.)

Rubber Grommets

Fastronix Solutions © 20 2012A

www.fastronixsolutions.com

1/4"3/8"1/2"3/4"

Qty1/4" #4 10pc.3/8" #6 10pc.1/2" #8 10pc.5/8" #10 8pc.3/4" #12 8pc.7/8" #14 7pc.1" #16 6pc.

Qty10pc.10pc.10pc.10pc.10pc.10pc.10pc.

30pack

50pack

1/4" #140-000

Split Loom

Split loom is one of the mostpopular conduits for holdinggroups of wire. It protectswires against abrasion orpinching. Split loom has aslit for easy insertion of wiresover a long run. Made fromblack polyethylene andavailable in a variety of sizes.

#141-010

#143-010#142-010

Wiring Accessories

Use to protect and sealwiring splices andconnections. Assortmentkit containing two 5"pieces of the followingsizes, 3/16", 1/4", 3/8" and1/2".

1/2"

Kits include 3' length ofFastronix Ultra high tempsleeving and (6) adhesivelined heat shrink ends to holdand bond sleeving. Use toprotect cables and wiringfrom extreme heat areas.Available in 3 sizes.

Heavy duty plated steelneoprene cushioned clamps.Use to secure hoses, fuellines, wire harnesses, cablesand loom tubing. Clampshave a ¼” mounting hole andare available in a variety ofsizes.

3/4" #140-130

10' coil

#140-020

3/4"

#140-120

#140-1101/4"

#403-503

#403-505

3/8"

#140-030

1/2"

#403-5511/4" #140-100

#140-010

3/8"

Size

#403-501A 100% woven blackfiberglass sleeving forapplications with temps to1200 F. Protects wiring andcables from extremetemperatures. Available in 3'lengths. (1/4" is 5' in length)

#403-552

Cable Clamps High Temp

Part #

Ultra

High Temp Sleeving Kit

Sleeving

#403-504

#403-506

#403-500

#403-502

10' coil#145-008 8' coil

#403-5503/16"

7/16" #403-555

Nylon Cable Clamps

#404-003

Heat Shrink Tubing

Lightweight black nylon cableclamps. Ideal for securingbrake lines, wires cables andfuel lines. All have a 13/64"mounting hole and areavailable in ten packs.

Size Part #1/8"

#403-591

5/16" #403-5533/8" #403-554

Nylon Clamp Assortment Packs1/2" #403-556

10' coil

Strong but lightweight black nylonclamp assortments, great forsecuring a wide variety of smallersize brake lines and cables.Available in 30 or 50 packs.

#403-59010each 1/8",3/16"and 1/4"

10each 1/8",3/16",1/4",5/16"and 3/8"

Fastronix Solutions © 21 2012A

www.fastronixsolutions.com

#401-300 #401-301

Easy to use - no crimping or soldering, just strip, insert wireand tighten set screw. Strips can be easily cut for anyapplication. Dead front design to prevent shorts. Acceptswire sizes 8 to 18 gauge.

Headlight Connectors

Red

3- Wire connector

Pre-wired headlightconnector assemblywith 12" leads. Use onall vehicles with sealedbeam headlights or asa flasher socket.Available in 2 or 3 wireconfigurations.

2- Wire connector

Moisture Resistant

Splice Taps

Wiring Accessories #152-220

Black

10 Gauge Race Wire

20' coil of 10 gauge cross-linkedautomotive race wire. Rated hightemp to 257F Resists oil andabrasions. Use in high currentautomotive applications.

Bullet Tap Splices

#152-020

#400-9105 bullet terminals / 5 splice taps

Everything you need toquickly splice into an existingwire while providing theflexibility to connect ordisconnect through the bulletterminal as needed. Includes5-splice taps and 5-bulletterminals. (18-14ga)

#406-100

Euro Style Terminal Strip

#400-900 (package of 10)

#400-9013M gel filled splice tap #804(blue), 18-14 gauge.Protective gel sealsconnection ensuring amoisture resistant barrierpreventing corrosion.

(package of 5)

Gel Filled

RPM Selector Switch

Use in place of RPM Chips. EachRPM Selector has a 1200 RPMrange and adjusts in 100 RPMincrements. Selector modules areavailable in RPM ranges from 2000to 9000 to meet your exact needs.Adjust quickly and accurately with aturn of the knob.

Above #650-002See full details atfastronixsolutions.com

Splice Taps

3M splice taps #801(blue) for18-14gauge wire. Quickconnections with no wirestripping. Simply insert bothwires and squeeze downmetal insert with pliers andsnap cover in place.

Fastronix Solutions © 22 2012A

www.fastronixsolutions.com

22-18

16-1422-18

Solder splice connectors have asolder ring and a heat shrinkinsulator sleeve. Strip and insertwires, when heat is applied thesolder melts inside bonding thewires while the adhesive andinsulation melt and shrink sealingthe connection. (Package of 10)

#400-40416-14 #400-405

12-10 #400-403

#400-40612-10

12-10

Gauge

#400-415#400-41416-14

#400-407

Heat Shrink Terminal 10 Packs.

Heat sealable crimp-on terminals provide arugged environmentally sealed connection forwire gauges 22 through 10. They insulate, sealand protect electrical connections from water,abrasion and corrosive elements.

#10 Ring Terminal

22-18

Solder Splice Connectors

WireGauge

Gauge Part#

1/4" Female Push On

#400-413Part#

Heat Shrink Terminals

#400-412

Butt SpliceGauge Part#22-18 #400-410

#400-411

16-14 #400-40812-10 #400-409

16-1412-10

Part#

1/4" Male Push On

Assortment 10 Pack Includes

Terminal Products

Gauge Part#

22-18

#400-402#400-401

Combo Butt Splice

When only the best will douse the ultimate heat shrinksolder splice. Crimped forreliability, soldered forstrength and conductivity andheat sealed for superiordurability and protection.

(3)20-18ga (5)16-14ga (2)12-10ga.

#400-420

Premium Splice Pack

Fastronix "T" ShirtsGet your Fastronix Solutions T-Shirt,available for a limitedtime. Features 100%cotton with the red andblack Fastronix logo onfront and large logo onback.

Available in M, L, XL, and 2XL

Vinyl Butt Splice Combo#400-430 (pkg of 5)

Heat ShrinkCombo#400-440 (pkg of 5)

Splice 2 wires to 1 wire withthese combo butt splices.Available in standard vinyl orpremium heatshrink withadhesive liner. 16-14gauge to 12-10 gauge. 5 per pack.

Fastronix Solutions © 23 2012A

www.fastronixsolutions.com

Gauge Qty16-14 1016-14 5012-10 1012-10 50

#400-135#400-235

22-18 #400-13416-14 #400-234

#400-236 #400-237

12-10 #400-334 #400-335

#1/2" Ring Terminal

12-10 #400-336 #400-337

Gauge 10 Pack 50 Pack22-18 X X16-14

16-1412-10

#3/8" Ring TerminalGauge 10 Pack 50 Pack

#400-332 #400-333#400-232 #400-233

Gauge22-18 #400-132 #400-133

10 Pack

#400-131#400-130

12-10

#5/16" Ring Terminal

#400-230 #400-23116-1422-18

Gauge 10 Pack

#400-326 #400-327

#400-325

50 Pack

#400-330 #400-331

#10 Ring Terminal

12-10

#1/4" Ring Terminal

Quality nylon insulated crimp on ring terminalsavailable in a wide range of wire and stud sizes.These Fastronix terminals feature an extrasleeve and can be double crimped for morestrength and a better connection.

50 Pack

50 Pack#400-127

#400-225

#400-227

10 Pack 50 pack#400-141

#400-340 #400-341#400-240 #400-241

Butt Connectors#400-302

12-10 #400-324

Terminal Products

Gauge 10 Pack

16-14 #400-22422-18

12-10

#400-12550 Pack

#400-124

Available in 10 or 50 Packs

#400-14022-18

Heavy duty nylon insulated crimp on butt connectors featurea solid barrel for a superior connection. Available in threesizes in packages of 10 or 50.

Gauge

16-14

1/4" #404-011 (20 pack)

3/8" #404-012 (15 pack)

Pre-cut Heat Shrink

1-1/4" long dual-wall heatshrink pieces with adhesiveliner allows you to quicklysecure and weatherproof allcrimp terminal wire splicesand connections.

#400-200 22-18 #400-126Gauge

16-14 #400-226

Female MaleUse as an in-line connector

Quick connect Terminals

Standard 1/4" fully insulated nylon crimp-on quick connect terminals. Available in both female and male, packaged in quantities of 10 or 50.

#400-204 Use with switches, fuse blocks, relays. #400-300 #400-303

#400-304

#400-203#400-202

Performance Ring Terminals

#8 Ring Terminal

10 Pack

Fastronix Solutions © 24 2012A