catalog aimpoint red dot sights | optics trade | 2015
TRANSCRIPT
PRODUCTS 2015
RED DOT SIGHTS FOR HUNTING &
SPORT Shooting
2
When the time comes to take the shot, there should be no question that you can count on your sight to perform. We believe that a weapon sight should simplify aiming while meeting the highest possible requirements for reliability and ruggedness.We know that conditions in the field place extreme demands on your equipment, so we design and test Aimpoint products to stand up to any condition you are likely to encounter. We also design our products to operate constantly for years on a single battery so your sight will be ready when you are.
The Aimpoint Philosophy
Why an Aimpoint Red Dot Sight?
To be successful, shooters must be able to aim accurately and quickly under a wide variety of conditions. On a shooting range, there is plenty of time to take aim, but in the real world, everything is in fast motion. Add rough terrain, foul weather, poor light and high levels of stress and even the most experienced hunter will be put to the test.
Tests have repeatedly proven that the single red dot reticule is the fastest on target in timed and rapid-fire close target exercises and also provides the greatest increase in hit probability with moving targets. Other aiming devices require that the shooter’s focus leaves the target or create limited situational awareness. Aimpoint red dot sights give you increased aiming confidence, allow you to remain on target and shoot with both eyes open, so you are fully aware at all times.
Why an aimpointred dot sight?
2 3
Many great hunting opportunities happen suddenly, and you have to be ready when game appears. An Aimpoint sight gives you a tremendous advantage, aiming with both eyes open allows you to see the animal as well as the surroundings. You instinctively place the red dot on the game, and are ready to pull the trigger.
We design our sights to make you effective and extremely fast when you really need to be.
Get the WHOLE picture
Get the WHOLE picture
Former World’s Strongest Man, Magnus Samuelsson, Hunting Cape Buffalo in Africa
”When doing something so exciting and critical as hunting dangerous game, I want to see what is going on around me
by keeping my both eyes open!”
4
All conditions – Anywhere
Aimpoint sights work in all light condi-tions, from the darkness of the forest before dawn, to bright mountain sun-light. They are completely waterproof so you never have to worry about rain or immersion. Aimpoint sights are developed and tested to be used in any weather conditions, from the sub-zero temperatures of the Arctic to the heat and humidity of the tropics.
On any type of firearmWhether you have a rifle, shotgun, handgun, black powder rifle or bow, Aimpoint has a sight for you.
User friendlinessAimpoint sights are extremely user friendly. Operated by a mechanical switch or push-buttons, an Aimpoint sight can be easily and quickly changed to the right setting while simultane-ously aiming through your sight. Our mechanical switch and push buttons won’t freeze and are easy to operate whether you are wearing gloves or not.
Environmental awarenessAt Aimpoint, we take great pride in making sure that neither hazardous nor radioactive materials are used in our sights.
Standard features on
all Aimpoint sights
• Unlimited field of view
• Parallax-free
• Unlimited eye relief
• Unaffected by extreme weather conditions
• Extremely rugged, durable construction
• No hazardous materials
• No laser emission that could be harmful to your eyes
• Increased aiming confidence and hit probability
• Reduced training time and ammunition consumption
• Battery life measured in years
5
Accessories & mounts info on page 12-13.More tech details on page 14.
AIMPOINT micro H-2
AIMPOINT MICRO H-1
Article No 200185Dot size 2 MOA*Battery life**A 50 000 hBattery type CR2032Weight 93 gWeigth w mount and flip covers 136 gPower Switch Rotary Mounting Integrated Picatinny/ Weaver
Article No 11910 / 200018Dot size 4 / 2 MOA*Battery life**A 50 000 hBattery type CR2032Weight 84 gWeight w mount 105 gPower Switch Rotary Mounting Integrated Picatinny/ Weaver
The Micro H-2 is a result of feedback coming from hard core customers desiring an even more hard core Micro sight. With a redesigned and reinforced house body, as well as flip-up covers protecting the lenses, the Micro H-2 can withstand all types of environmental conditions. And thanks to new optical lenses and cutting edge lens coatings, the optical performance and the shape and clarity of the red dot are radically improved.
The Aimpoint Micro H-2 is available as a kit with Blaser original saddle mount. Micro H-2 with Blaser mount, Art.No. 200187Complete information about this product
Since its introduction in 2007, the Micro H-1 has become a very popular hunting sight worldwide due to its size, light weight and robust build quality.
The Aimpoint Micro H-1 is available as a kit with Blaser original saddle mount. Micro H-1 with Blaser mount, Art.No. 200090Complete information about this product
MICRO SERIES SIGHTS
6
With all of the ruggedness that has made Aimpoint sights famous all over the world, Aimpoint Micro series sights are able to withstand the toughest conditions while adding negligible weight to your firearm. Shotguns, rifles, handguns or archery, these sights can do it all!
The Micro sights series can be mounted on to a magnified scope with an adapter to hunt at both long and short distances. Plenty of mounts for the Micro sights are available on the market.
7
Accessories & mounts info on page 12-13.More tech details on page 14.
AIMPOINT HUNTER H34L
AIMPOINT HUNTER H30L
Article No 12693Dot size 2 MOA*Battery life**B 50 000 hBattery type CR2032Tube Ø 34 mmPower Switch Push button Dist btwn rings Max 142 mm Min 45 mmMounting 2 Rings Ø34 mm Not included
Article No 12691Dot size 2 MOA*Battery life**B 50 000 hBattery type CR2032Tube Ø 30 mmPower Switch Push button Dist btwn rings Max 142 mm Min 45 mmMounting 2 Rings Ø30 mm Not included
This sight has a 34 mm tube diameter for an exceptional optical performance. Due to its length, we recommend this sight primarily for use on rifles with standard or magnum actions, plus to any hunter who desires the classic lines of a full length sight.Complete information about this product
The Hunter series offers an improved optical performance and incorporates the latest technology from Aimpoint. Its design is similar to a traditional magnifying scope and is appreciated by many hunters. The Hunter series is available in 4 different versions. The length of the action of your rifle will determine if you need a long or short version. For an even better optical experience, the 34 mm versions would be the sight we recommend.
This sight has a 30 mm tube diameter, which is standard and therefore offers a wide choice of mounting rings. Due to its length, we recommend this sight primarily for use on rifles with standard or magnum actions, plus to any hunter who desires the classic lines of a full length sight.Complete information about this product
HUNTER SERIES SIGHTS
8
Accessories & mounts info on page 12-13.More tech details on page 14.
AIMPOINT HUNTER H34S
AIMPOINT HUNTER H30S
Article No 12692Dot size 2 MOA*Battery life**B 50 000 hBattery type CR2032Tube Ø 34 mmPower Switch Push button Dist btwn rings Max 110 mm Min 45 mmMounting 2 Rings Ø34 mm Not included
Article No 12690Dot size 2 MOA*Battery life**B 50 000 hBattery type CR2032Tube Ø 30 mmPower Switch Push button Dist btwn rings Max 110 mm Min 45 mmMounting 2 Rings Ø30 mm Not included
This sight has a 34 mm tube diameter for an exceptional optical performance. Due to its length, we recommend this sight for use on standard or short action rifles, as well as semi-automatic rifles, combination rifles, drilling and magnum handguns.Complete information about this product
This sight has a 30 mm tube diameter, which is standard and therefore offers a large choice of mounting rings. Due to its length, we recommend this sight for use on standard or short action rifles, as well as semi-automatic rifles, combination rifles, drilling and magnum handguns.Complete information about this product
The Hunter series offers an improved optical performance and incorporates the latest technology from Aimpoint. Its design is similar to a traditional magnifying scope and is appreciated by many hunters. The Hunter series is available in 4 different versions. The length of the action of your rifle will determine if you need a long or short version. For an even better optical experience, the 34 mm versions would be the sight we recommend.
HUNTER SERIES SIGHTS
9
Accessories & mounts info on page 12-13.More tech details on page 14.
AIMPOINT 9000L
Article No 11406 / 11419Dot size 4 / 2 MOA*Battery life**C 50 000 hBattery type 2 L76 • DL1/3NTube Ø 30 mmPower Switch Rotary Dist btwn rings Max 155 mm Min 60 mmMounting 2 Rings Ø30 mm Not included
This is the most popular sight within the 9000 series due to its long length. It makes it ideal for use primarily on rifles with standard or magnum actions.Complete information about this product
Ever since their introduction in 2005, market response to Aimpoint’s 9000 series sights has been very strong. The 9000 series’ ability to offer a combination of a high quality optic at an affordable price has kept this sight in high demand. The 9000 series is available in three different versions. The length of the action of your rifle will determine if you need a long or short version.
9000 SERIES SIGHTS
AIMPOINT 9000SC
Article No 11407 / 11417Dot size 4 / 2 MOA*Battery life**C 50 000 hBattery type 2 L76 • DL1/3NTube Ø 30 mmPower Switch Rotary Switch Dist btwn rings Max 115 mm Min 50 mmMounting 2 Rings Ø30 mm Not included
This is the short version of the series which is for use on standard or short action rifles, as well as semi-automatic rifles, combination rifles, drilling and magnum handguns.Complete information about this product
10
Accessories & mounts info on page 12-13.More tech details on page 14.
AIMPOINT 9000SC-NV
AIMPOINT CompC3
Article No 200136Dot size 2 MOA*Battery life**C 50 000 hBattery type 2 L76 • DL1/3NTube Ø 30 mmPower Switch Rotary Switch Dist btwn rings Max 115 mm Min 50 mmMounting 2 Rings Ø30 mm Not includedNight vision compatible Yes
Article No 11421Dot size 2 MOA*Battery life**C 50 000 hBattery type 2L76 • DL1/3NTube Ø 30 mmPower Switch Rotary SwitchRing Width Max 30 mmMounting 1 Ring Ø30 mm Included
The Aimpoint CompC3 is designed to be used whenever you need a compact sight with a 30 mm tube diameter. This sight belongs to the Comp series sights which is a very popular series for the professional market. The CompC3 is a civilian version mostly used on scout rifles, bows, carbines and competition pistols.Complete information about this product
This is the same sight as the 9000SC, but it is compatible with night vision devices (NVD.) With more and more states and countries allowing hunting of predators and feral wildlife after sunset, Aimpoint offers one sight which is compatible with NVDs. The first four intensity settings are for use with a night vision device. This means that the dot is not visible with a naked eye. Through the night vision equipment, the red dot becomes white and can be used as usual.Complete information about this product
CompC3
Intensity settings1 Off, 4 NVD & 5 DL
View through NVD
11
Flip-Up Rear Cover For CompC3 & 9000
Art.No. 12224
Flip-up Front Cover For CompC3 & 9000
Art.No. 12223
Flip-up Front Cover Transparent For CompC3 & 9000
Art.No. 12241
Flip-up Rear Cover Transparent For CompC3 & 9000
Art.No. 12240
Polarization Filter For CompC3 & 9000
Art.No. 12216
Rubber Bikini Lens Cover For Micro sights
Art. No. 12204
Lens Cover Bikini For 9000 & CompC3, Art.No. 10628
For H30L & H30S, Art.No. 12663
For H34L & H34S, Art.No. 12664
Accessories
CR 2032 Lithium Battery For Micro & Hunter
Art.No. 12211
Micro ToolArt.No. 12207
DL1/3N Lithium Battery For 9000 and CompC3
Art.No. 10903
Flip-up Front Cover Transparent For Micro H-2
Art.No. 200192
Flip-up Rear Cover Transparent For Micro H-2
Art.No. 200193
Flip-up Front Cover For Micro H-2
Art.No. 200191
12
SRW-L Low Wide Ring 30 mm Black, for CompC3. Fits on Weaver rail and Picatinny rail.
Art.No. 12244*
Micro H-1 Drilling Mount Fits most of the Merkel Drillings.
Art.No. 12200**
Micro H-1 Mount kit Black finish, fits Ruger MK III.
Art.No. 12464**
Micro H-1 Mount Kit For Ruger 10/22.
Art.No. 12466**
Micro H-1 Mount For Glock pistols.
Art.No. 12437**
Micro 11 mm Dovetail Mount Fits most of the 11 mm Dovetail Bases ranging from 10-12.5 mm.
Art.No. 12215**
Micro LRP Mount Kit To convert Micro Mount to Lever Release Picatinny.
Art.No. 12184
Micro H-1 Safari Mount Fits most of the Merkel Double Rifles.
Art.No. 12201**
Micro H-1 2MOA With Blaser Mount original factory installed. Fits Blaser guns with saddle mount interface. The Blaser mount is not sold separately.
Art.No. 200090
LQR 34 mm Rings Black, one pair. For H34S and H34L Fits on Leupold Quick Release bases.
Art.No. 12910*
WH 34 mm Rings Black, one pair. For H34S and H34L Fits on Weaver bases and Picatinny rail.
Art.No. 200087*
Micro Spacer High For Micro sights. Raises height of optical axis to 39 mm for cowitness with AR-15.
Art.No. 12358***
Micro Spacer Low For Micro sights. Raises height of optical axis to 30 mm.
Art.No. 12357***
Micro LRP Mount Lever Release Picatinny for Micro sights. Return to zero after dismount-ing. Thread sealer included.
Art.No. 12905 ***
* Screws and Allen key included** Screws and Micro Tool included*** Screws, Micro Tool and Thread Sealer included
Mount Adapter 30 mm For magnifying scopes with 30 mm tube.
Art.No. 200152*
Rings 30 mm Black, one pair. For 9000 sights.
Art.No. 12229*
Mount Adapter 34 mm For magnifying scopes with 34 mm tube.
Art.No. 200153*
Mounting solutions
Micro H-2 2MOA With Blaser Mount original factory installed. Fits Blaser guns with saddle mount interface. The Blaser mount is not sold separately.
Art.No. 200187
13
TECHNICAL SPECS
DISTANCE BETWEEN RINGS ***
Aimpoint Hunter Series
Aimpoint 9000 Series Aimpoint CompC3
14
ELECTRONIC DATA MICRO H-2 MICRO H-1 HUNTER H34L
HUNTER H30L
HUNTER H34S HUNTER H30S 9000SC-NV 9000SC 9000L COMPC3
One 3V Lithium battery, type CR2032 CR2032 CR2032 CR2032 CR2032 CR2032 2L76 • DL1/3N 2L76 • DL1/3N 2L76 • DL1/3N 2L76 • DL1/3N
Battery life, in hours** 50 000 A 50 000 A 50 000 B 50 000 B 50 000 B 50 000 B 50 000 C 50 000 C 50 000 C 50 000 C
Battery life, in hours, in NVD position 500 000
Manual rotary switch - Dot intensity regulator x x x x x x
Digital push button - Dot intensity regulator x x x x
1 Off and daylight (DL) settings 12 DL 12 DL 12 DL 12 DL 12 DL 12 DL 9 DL 9 DL 9 DL
Night Vision Device (NVD) and daylight (DL) settings 1 Off, 4 NVD & 5 DL
MECHANICAL DATA
Material green touch pad - Silicon rubber x x x x
Material flip-up lens covers - Rubber black & polymer transparent
x
Material lens covers - Polymer - Black x x x x x x x x
Material lens covers - Rubber - Black - Matte x
Adjustment 1 click = 13 mm at 100 m 1/2” at 100 yds
13 mm at 100 m 1/2” at 100 yds
20 mm at 100 m 1/2” at 80 yds
20 mm at 100 m 1/2” at 80 yds
20 mm at 100 m 1/2” at 80 yds
20 mm at 100 m 1/2” at 80 yds
16 mm at 100 m 1/2” at 100 yds
16 mm at 100 m 1/2” at 100 yds
12 mm at 100 m 1/2” at 100 yds
16 mm at 100 m 1/2” at 100 yds
Mounting methods IntegratedPicatinny/Weaver
IntegratedPicatinny/Weaver
2 Ringsø 34 mmNot
included
2 Ringsø 30 mmNot
included
2 Ringsø 34 mm
Not included
2 Rings ø 30 mm
Not included
2 Ringsø 30 mm
Not included
2 Ringsø 30 mm
Not included
2 Ringsø 30 mm
Not included
1 Ring ø 30 mmIncluded
DIMENSIONS
Length 77 mm / 3” 62 mm / 2.4” 229 mm / 9.0” 229 mm / 9.0” 197 mm / 7.75” 197 mm / 7.75” 160 mm / 6.3” 160 mm / 6.3” 200 mm / 7.9” 120 mm / 4.7”
Width x height - including mount 41 x 40 mm 1.6” x 1.6”
Width x height - including mount and flip ups 42 x 46 mm1.6” x 1.8”
Objective diameter 28 mm / 1.1”
47 mm / 1.85”
43 mm /1.7”
47 mm / 1.85” 43 mm / 1.7” 38 mm / 1.5” 38 mm / 1.5” 38 mm / 1.5” 38 mm / 1.5”
Tube diameter 34 mm 30 mm 34 mm 30 mm 30 mm 30 mm 30 mm 30 mm
Maximum distance between rings***2 142 mm 5.6” 142 mm 5.6” 110 mm 4.3” 110 mm 4.3” 115 mm / 4.5” 115 mm / 4.5” 155 mm / 6.1”
Minimum distance between rings***3 45 mm / 1.77“ 45 mm / 1.77“ 45 mm / 1.77“ 45 mm / 1.77“ 50 mm / 2.0” 50 mm / 2.0” 50 mm / 2.0”
Maximum ring width***4 30 mm
Weight sight only 93 g / 3.3 oz
84 g / 3.0 oz
260 g / 9.0 oz
235 g / 8.3 oz
250 g / 8.8 oz
225 g / 7.9 oz
210 g / 7.4 oz
210 g / 7.4 oz
230 g / 8.1 oz
200 g / 7.1 oz
Weight sight with integrated mount 105 g / 3.7 oz
Weight sight with integrated mount and flip-ups.
136 g / 4.8 oz
ARTICLE NUMBERS
4 MOA 11910 11407 11406
2 MOA 200185 200018 12693 12691 12692 12690 200136 11417 11419 11421
ELECTRONIC DATA MICRO H-2 MICRO H-1 HUNTER H34L
HUNTER H30L
HUNTER H34S HUNTER H30S 9000SC-NV 9000SC 9000L COMPC3
One 3V Lithium battery, type CR2032 CR2032 CR2032 CR2032 CR2032 CR2032 2L76 • DL1/3N 2L76 • DL1/3N 2L76 • DL1/3N 2L76 • DL1/3N
Battery life, in hours** 50 000 A 50 000 A 50 000 B 50 000 B 50 000 B 50 000 B 50 000 C 50 000 C 50 000 C 50 000 C
Battery life, in hours, in NVD position 500 000
Manual rotary switch - Dot intensity regulator x x x x x x
Digital push button - Dot intensity regulator x x x x
1 Off and daylight (DL) settings 12 DL 12 DL 12 DL 12 DL 12 DL 12 DL 9 DL 9 DL 9 DL
Night Vision Device (NVD) and daylight (DL) settings 1 Off, 4 NVD & 5 DL
MECHANICAL DATA
Material green touch pad - Silicon rubber x x x x
Material flip-up lens covers - Rubber black & polymer transparent
x
Material lens covers - Polymer - Black x x x x x x x x
Material lens covers - Rubber - Black - Matte x
Adjustment 1 click = 13 mm at 100 m 1/2” at 100 yds
13 mm at 100 m 1/2” at 100 yds
20 mm at 100 m 1/2” at 80 yds
20 mm at 100 m 1/2” at 80 yds
20 mm at 100 m 1/2” at 80 yds
20 mm at 100 m 1/2” at 80 yds
16 mm at 100 m 1/2” at 100 yds
16 mm at 100 m 1/2” at 100 yds
12 mm at 100 m 1/2” at 100 yds
16 mm at 100 m 1/2” at 100 yds
Mounting methods IntegratedPicatinny/Weaver
IntegratedPicatinny/Weaver
2 Ringsø 34 mmNot
included
2 Ringsø 30 mmNot
included
2 Ringsø 34 mm
Not included
2 Rings ø 30 mm
Not included
2 Ringsø 30 mm
Not included
2 Ringsø 30 mm
Not included
2 Ringsø 30 mm
Not included
1 Ring ø 30 mmIncluded
DIMENSIONS
Length 77 mm / 3” 62 mm / 2.4” 229 mm / 9.0” 229 mm / 9.0” 197 mm / 7.75” 197 mm / 7.75” 160 mm / 6.3” 160 mm / 6.3” 200 mm / 7.9” 120 mm / 4.7”
Width x height - including mount 41 x 40 mm 1.6” x 1.6”
Width x height - including mount and flip ups 42 x 46 mm1.6” x 1.8”
Objective diameter 28 mm / 1.1”
47 mm / 1.85”
43 mm /1.7”
47 mm / 1.85” 43 mm / 1.7” 38 mm / 1.5” 38 mm / 1.5” 38 mm / 1.5” 38 mm / 1.5”
Tube diameter 34 mm 30 mm 34 mm 30 mm 30 mm 30 mm 30 mm 30 mm
Maximum distance between rings***2 142 mm 5.6” 142 mm 5.6” 110 mm 4.3” 110 mm 4.3” 115 mm / 4.5” 115 mm / 4.5” 155 mm / 6.1”
Minimum distance between rings***3 45 mm / 1.77“ 45 mm / 1.77“ 45 mm / 1.77“ 45 mm / 1.77“ 50 mm / 2.0” 50 mm / 2.0” 50 mm / 2.0”
Maximum ring width***4 30 mm
Weight sight only 93 g / 3.3 oz
84 g / 3.0 oz
260 g / 9.0 oz
235 g / 8.3 oz
250 g / 8.8 oz
225 g / 7.9 oz
210 g / 7.4 oz
210 g / 7.4 oz
230 g / 8.1 oz
200 g / 7.1 oz
Weight sight with integrated mount 105 g / 3.7 oz
Weight sight with integrated mount and flip-ups.
136 g / 4.8 oz
ARTICLE NUMBERS
4 MOA 11910 11407 11406
2 MOA 200185 200018 12693 12691 12692 12690 200136 11417 11419 11421
Warranty InformationAimpoint values your business and always attempts to provide you the very best of products and services. That’s why we back our products with one of the best guarantees in the industry. Our products are guaranteed to be free from original manufacturer defects in material and/or workmanship under normal use from the date of purchase for ten (10) years for personal use and two (2) years for professional or competition use.
Customer Service & Dealership EligibilityFor dealership eligibility and information about customer service, please scan the code or follow the link.
www.aimpoint.com/customerservice www.aimpoint.com/dealership
Micro H-2
Micro H-1
Hunter H34L
Hunter H30L
Hunter H34S
Hunter H30S
9000SC-NV
9000SC
9000L
CompC3
APPLICATION AREAS
Hunters
Action shooters - - - - - - -
APPLICATION FIREARMS
Pistol - Revolver - - -
Bow - - - - - - -
Magnum Handgun1 - - - -
Semi-automatic rifle
Rifle with short length action
Rifle with standard length action - - - -
Combination rifles
Drilling
primary use secondary use - not recommended
TECHNOLOGY- ACET (Advanced Circuit Efficiency Technology)- Working principle: Reflex collimator sight - red dot sight
OPTICAL DATA- LED (Light Emitting Diode) totally eye-safe- Light source wave length, 650 nm red light - Band Pass coating for NVD compatibility (9000SC-NV) - Parallax free - No centering required- Unlimited eye relief- Anti-reflex coating all surfaces & multi-layer coating objective lens - No magification (1X)
MECHANICAL DATA- Material housing and tube, high strength aluminium- Surface finish housing, anodized, semi-matte- Black color housing
ENVIRONMENTAL DATA- Temperature range, -30° to +60°C (-20° to +140°F)- Fully waterproof - No radioactive material used- No laser emission
1 Optics must be mounted using two heavy duty steel mounting rings and a solid one piece mounting base designed specifically for use with these revolvers.
* MOA (minute of angle) 1 MOA ≈ 30 mm at 100 meters ≈ 1” at 100 yards
** A at room temperature & at setting 8 out of 12 ** B at room temperature & at start-up setting 7 ** C at room temperature & at setting 7 out of 10
Specifications are subject to change without notice.
General TECHNICAL DATA
FEATURES FOR ALL AIMPOINT RED DOT SIGHTS
In summary, Aimpoint’s breakthrough technology allows you to do what comes naturally - shoot with both eyes open whileremaining focused on the target. Instinctively place the reddot on the game with no centering required, and you are ready to pull the trigger. Get on target fast, and forget about being challenged by poor weather conditions, bad light, or moving targets. It is this inherent combination of simplicity, speed, accuracy, andreliability that makes Aimpoint sights the preferred choice for beginners and experts alike.
For speed, ACCURACY AND RELIABILITY
15
Aimpoint ABJägershillgatan 15
SE- 213 75 Malmö, SwedenPhone +46 (0)40 671 50 20
Fax +46 (0)40 21 92 38E-mail: [email protected]
www.aimpoint.com
Photographers: Mikael Grennard, Sussi Lorinder. Art Direction and Layout: Thorn Reklambyrå, Printing House: Exaktaprinting, Malmö, SWEDEN
This printed material is for information purposes only and does not constitute any binding obligation or agreement by Aimpoint AB All rights reserved. © 2015 Aimpoint AB. Art. No. M01976
Available at: www.aimpoint.com/catalogs
An extended version of this catalog is available online in the following languages: English, French, German, Swedish, Russian, Spanish and Italian.