red dot sights for hunting & sport...
TRANSCRIPT
-
PRODUCTS 2015
RED DOT SIGHTS FOR HUNTING &
SPORT Shooting
-
To be successful, shooters must be able to aim accurately and quickly under a wide variety of conditions. On a shooting range, there is plenty of time to take aim, but in the real world, everything is in fast motion. Add rough terrain, foul weather, poor light and high levels of stress and even the most experienced hunter will be put to the test.
Tests have repeatedly proven that the single red dot reticule is the fastest on target in timed and rapid-fire close target exercises and also provides the greatest increase in hit probability with moving targets. Other aiming devices require that the shooter’s focus leaves the target or create limited situational awareness. Aimpoint red dot sights give you increased aiming confidence, allow you to remain on target and shoot with both eyes open, so you are fully aware at all times.
Why an aimpointred dot sight?
When the time comes to take the shot, there should be no question that you can count on your sight to perform. We believe that a weapon sight should simplify aiming while meeting the highest possible requirements for reliability and ruggedness.We know that conditions in the field place extreme demands on your equipment, so we design and test Aimpoint products to stand up to any condition you are likely to encounter. We also design our products to operate constantly for years on a single battery so your sight will be ready when you are.
The Aimpoint Philosophy
1
-
All conditions – Anywhere
Aimpoint sights work in all light condi-tions, from the darkness of the forest before dawn, to bright mountain sun-light. They are completely waterproof so you never have to worry about rain or immersion. Aimpoint sights are developed and tested to be used in any weather conditions, from the sub-zero temperatures of the Arctic to the heat and humidity of the tropics.
On any type of firearmWhether you have a rifle, shotgun, hand-gun, black powder rifle or bow, Aimpoint has a sight for you.
User friendlinessAimpoint sights are extremely user friendly. Operated by a mechanical switch or push-buttons, an Aimpoint sight can be easily and quickly changed to the right setting while simultane-ously aiming through your sight. Our mechanical switch and push button won’t freeze and are easy to operate whether you are wearing gloves or not.
Environmental awarenessAt Aimpoint, we take great pride in making sure that neither hazardous nor radioactive materials are used in our sights.
Former World’s Strongest Man, Magnus Samuelsson, Hunting Cape Buffalo in Africa
When doing something so exciting and critical as hunting dangerous game, I want to see what is going on around me
by keeping both of my eyes open!
Standard features on
all Aimpoint sights
• Unlimited field of view
• Parallax-free
• Unlimited eye relief
• Unaffected by extreme weather conditions
• Extremely rugged, durable construction
• No hazardous materials
• No laser emission that could be harmful to your eyes
• Increased aiming confidence and hit probability
• Reduced training time and ammunition consumption
• Battery life measured in years
3
-
AIMPOINT MICRO H-1
Article No 11910 / 200018Dot size 4 / 2 MOA*Battery life**A 50 000 hoursBattery type CR2032Weight 3.0 ozWeight w mount 3.7 ozPower Switch Rotary Mounting Integrated Picatinny/Weaver
Since its introduction in 2007, the Micro H-1 has become a very popular hunting sight worldwide due to its size, light weight and robust build quality.
The Micro sights series can be mounted onto a magnified scope with an adapter to hunt at both long and short distances.
Plenty of mounts for the Micro sights are available on the market.
Aimpoint Micro sights are available as a kit with Blaser original saddle mount.
Complete information about this product
MICRO SERIES SIGHTS
Micro H-1 Art.No. 200090
4
http://www.aimpoint.com/products/all-products/product-singleview/product/Micro%20H-1/
-
AIMPOINT HUNTER H30L
AIMPOINT HUNTER H34L
Article No 12693Dot size 2 MOA*Battery life**B 50 000 hoursBattery type CR2032Tube Ø 1.33”Power Switch Push button Dist btwn rings Max 5.6” Min 1.77” Mounting: 2 Rings Ø 1.33” Not included
Article No 12691Dot size 2 MOA*Battery life**B 50 000 hoursBattery type CR2032Tube Ø 1.18”Power Switch Push button Dist btwn rings Max 5.6” Min 1.77”Mounting 2 Rings Ø 1.18” Not included
This sight has a 34 mm tube diameter for an exceptional optical performance. Due to its length, we recommend this sight primarily for use on rifles with standard or magnum actions, a plus to any hunter who desires the classic lines of a full length sight.Complete information about this product
The Aimpoint sight was born steeped in hunting tradition. The difficulty in making fast shots to hit moose, wild boar and red stag moving through thick forests in rain and snow, made the illuminated red dot sight a necessity. Using the Hunter Series of sights, you’ll be able to make the tough shots and forget about being challenged by bad light or moving targets. Replace your magnified scope and give yourself the advantages of speed and accuracy on your next hunt.
This sight has a 30 mm tube diameter, which is standard and therefore offers a wide choice of mounting rings. Due to its length, we recommend this sight primarily for use on rifles with standard or magnum actions, a plus to any hunter who desires the classic lines of a full length sight.Complete information about this product
HUNTER SERIES SIGHTS
5
http://www.aimpoint.com/products/all-products/product-singleview/product/H34L/http://www.aimpoint.com/products/all-products/product-singleview/product/H30L/
-
HUNTER SERIES SIGHTS
AIMPOINT HUNTER H34S
AIMPOINT HUNTER H30S
Article No 12692Dot size 2 MOA*Battery life**B 50 000 hoursBattery type CR2032Tube Ø 1.33”Power Switch Push button Dist btwn rings Max 4.3” Min 1.77” Mounting 2 Rings Ø 1.33” Not included
Article No 12690Dot size 2 MOA*Battery life**B 50 000 hoursBattery type CR2032Tube Ø 1.18”Power Switch Push button Dist btwn rings Max 4.3” Min 1.77”Mounting 2 Rings Ø 1.18” Not included
This sight has a 34 mm tube diameter for an exceptional optical performance. Due to its length, we recommend this sight for use on standard or short action rifles, as well as semi-automatic rifles, combination rifles, drilling and magnum handguns.Complete information about this product
This sight has a 30 mm tube diameter, which is standard and therefore offers a wide choice of mounting rings. Due to its length, we recommend this sight primarily for use on rifles with standard or magnum actions, a plus to any hunter who desires the classic lines of a full length sight.Complete information about this product
The Aimpoint sight was born steeped in hunting tradition. The difficulty in making fast shots to hit moose, wild boar and red stag moving through thick forests in rain and snow, made the illuminated red dot sight a necessity. Using the Hunter Series of sights, you’ll be able to make the tough shots and forget about being challenged by bad light or moving targets. Replace your magnified scope and give yourself the advantages of speed and accuracy on your next hunt.
6
http://www.aimpoint.com/products/all-products/product-singleview/product/H34S/http://www.aimpoint.com/products/all-products/product-singleview/product/H30S/
-
AIMPOINT 9000L
AIMPOINT 9000SC-NV
Article No 11406 / 11419Dot size 4 / 2 MOA*Battery life**C 50 000 hoursBattery type 2 L76 • DL1/3NTube Ø 1.18”Power Switch Rotary Dist btwn rings Max 6.1” Min 2.0”Mounting 2 Rings Ø 1.18” Not included
Article No 200136Dot size 2 MOA*Battery life**C 50 000 hoursBattery type 2 L76 • DL1/3NTube Ø 1.18”Power Switch Rotary Switch Dist btwn rings Max 4.5” Min 2.0”Mounting 2 Rings Ø 1.18” Not includedNight vision compatible Yes
This is the most popular sight within the 9000 series due to its long length. It makes it ideal for use primarily on rifles with standard or magnum actions.Complete information about this product
Ever since their introduction in 2005, market response to Aimpoint’s 9000 series sights has been very strong. The 9000 series’ ability to offer a combination of a high quality optic at an affordable price has kept this sight in high demand. The 9000 series is available in three different versions. The length of the action of your rifle will determine if you need a long or short version.
This is the same sight as the 9000SC, but it is compatible with night vision devices (NVD.) With more and more states and countries allowing hunting of predators and feral wildlife after sunset, Aimpoint offers one sight which is compatible with NVDs. The first four intensity settings are for use with a night vision device. This means that the dot is not visible with a naked eye. Through the night vision equipment, the red dot becomes white and can be used as usual.Complete information about this product
AIMPOINT 9000SC
Article No 11407 / 11417Dot size 4 / 2 MOA*Battery life**C 50 000 hoursBattery type 2 L76 • DL1/3NTube Ø 1.18”Power Switch Rotary Switch Dist btwn rings Max 4.5” Min 2.0”Mounting 2 Rings Ø 1.18” Not included
This is the short version of the series which is for use on standard or short action rifles, as well as semi-automatic rifles, combination rifles, drilling and magnum handguns.Complete information about this product
9000 SERIES SIGHTS
Intensity settings1 Off, 4 NVD & 5 DL
View through NVD
7
http://www.aimpoint.com/products/all-products/product-singleview/product/9000L/http://www.aimpoint.com/products/all-products/product-singleview/product/9000SC/http://www.aimpoint.com/products/all-products/product-singleview/product/9000SC-NV/
-
Aimpoint does not just offer stand-alone products but rather complete modular optical solutions called System-of-Systems.These modular accessories can be used together with Aimpoint sights in order to enhance an operator´s capabilities. Placed behind the red dot sight, they do not affect the point of impact.
The Aimpoint 3XMag magnifying module is a high quality optic that can be used with any Aimpoint sight for extended range target identification and engagement.
Mechanical InterfaceThe recommended mount for the 3XMag is the Aimpoint TwistMount, which allows for quick attachment on any MIL-Std 1913 Picatinny Rail. Check if you need a spacer for co-witnessing with the Aimpoint sight. The 3XMag can also be attached to aftermarket “flip to side” mounts.
3XMAG
Item No: 11324Optical SystemMagnification: 3XField of view (FOV): 7 °Exit pupil diameter: 7 mm Eye relief: 70 mmPhysical SpecificationsDimensions, L x W x H: 110 mm x 44 mm x 41 mm (4.3” x 1.7” x 1.6”)Weight: 200 g (7.1 oz) including rubber cover
Environmental SpecificationsTemperature range: -45° C to + 70° C, (-50° F - +160° F) in operation and storageWater resistance: Submersible to 20 m (67 ft)
Complete information about this product
3xmag
8
http://www.aimpoint.com/products/all-products/product-singleview/product/3XMag/
-
* Screws and Allen key included** Screws and Micro Tool included*** Screws, Micro Tool and Thread Sealer included
ARD KillFlash® Filter CompC3 & 9000.
Art.No. 12239
Accessories
LQR 34 mm Rings Black, one pair. For H34S and H34L Fits on Leupold Quick Release bases.
Art.No. 12910*
WH 34 mm Rings Black, one pair. For H34S and H34L Fits on Weaver bases and Picatinny rail.
Art.No. 200087*
Mount Adapter 30 mm For magnifying scopes with 30 mm tube.
Art.No. 200152*
Rings 30 mm Black, one pair. For 9000 sights.
Art.No. 12229*
Mount Adapter 34 mm For magnifying scopes with 34 mm tube.
Art.No. 200153*
Mounting solutions
Micro Drilling Mount Fits most of the Merkel Drillings.
Art.No. 12200**
Micro Mount kit Black finish, fits Ruger MK III.
Art.No. 12464**
Micro Mount Kit For Ruger 10/22.
Art.No. 12466**
Micro Mount For Glock pistols.
Art.No. 12437**
Micro 11 mm Dovetail Mount Fits most of the 11 mm Dovetail Bases ranging from 10-12.5 mm.
Art.No. 12215**
Micro LRP Mount Kit To convert Micro Mount to Lever Release Picatinny.
Art.No. 12184
Micro Safari Mount Fits most of the Merkel Double Rifles.
Art.No. 12201**
Micro H-1 2MOA With Blaser Mount original factory installed. Fits Blaser guns with saddle mount interface. The Blaser mount is not sold separately.
Art.No. 200090
Micro Spacer High For Micro sights. Raises height of optical axis to 39 mm for cowitness with AR-15.
Art.No. 12358***
Micro Spacer Low For Micro sights. Raises height of optical axis to 30 mm.
Art.No. 12357***
Micro LRP Mount Lever Release Picatinny for Micro sights. Return to zero after dismount-ing. Thread sealer included.
Art.No. 12905 ***
Flip-Up Rear Cover For CompC3 & 9000
Art.No. 12224
Flip-up Front Cover For CompC3 & 9000
Art.No. 12223
Flip-up Front Cover Transparent
For CompC3 & 9000
Art.No. 12241
Flip-up Rear Cover Transparent
For CompC3 & 9000
Art.No. 12240
Polarization Filter For CompC3 & 9000
Art.No. 12216
Rubber Bikini Lens Cover For Micro sights
Art. No. 12204
Lens Cover Bikini For 9000 & CompC3, Art.No. 10628
For H30L & H30S, Art.No. 12663
For H34L & H34S, Art.No. 12664
CR 2032 Lithium Battery For Micro & Hunter
Art.No. 12211
Micro ToolArt.No. 12207 DL1/3N
Lithium Battery For 9000 and CompC3
Art.No. 10903
TwistMount Ring Separate ring for TwistMountArt. No. 12238 *
TwistMount Complete Quick Release Mount for 3XMag and CEUFits on Picatinny rail (MIL-STD 1913)Art. No. 12234 *
TwistMount Base Separate base for Twist-Mount Fits on Picatinny rail (MIL-STD 1913)Art. No. 12236
Aimpoint Endorsement
”A Red Dot Sight (RDS) is a force multiplier, and it enhances our ability to win the fight. I consider it to be mission critical.
I have been using Aimpoint RDS, in one form or another, either issued or privately purchased, since the mid 1980’s.
I use Aimpoint RDS for several reasons.Durability- It has proven to be sufficiently strong to meet the requirements
Reticle- The single dot makes for faster engagementElectronics- the phenomenal battery life means that I never have to turn the sight off- and more
importantly, on. It is always ready to go. And, I don’t have to concern myself with the unit switching off at critical moments.
The only RDS in the EAG armory are Aimpoint’s. There is a reason for that.”
Pat RogersEAG Tactical
9
-
ELECTRONIC DATA MICRO H-1 HUNTER H34L HUNTER H30L HUNTER H34S HUNTER H30S 9000L 9000SC 9000SC-NV
One 3V Lithium battery, type CR2032 CR2032 CR2032 CR2032 CR2032 2L76 • DL1/3N 2L76 • DL1/3N 2L76 • DL1/3N
Battery life, in hours** 50 000 A 50 000 B 50 000 B 50 000 B 50 000 B 50 000 C 50 000 C 50 000 C
Battery life, in hours, in NVD position 500 000
Manual rotary switch - Dot intensity regulator x x x x
Digital push button - Dot intensity regulator x x x x
1 Off and daylight (DL) settings 12 DL 12 DL 12 DL 12 DL 12 DL 9 DL 9 DL
Night Vision Device (NVD) and daylight (DL) settings
1 Off, 4 NVD & 5 DL
MECHANICAL DATA
Color touch pad - dark green x x x x
Material touch pad - Silicon rubber x x x x
Material lens covers - Polymer - black x x x x x x x
Material lens covers - Rubber - black - matte x
Adjustment 1 click = 1/2” at 100 yds 13 mm at 100 m
1/2” at 80 yds 20 mm at 100 m
1/2” at 80 yds 20 mm at 100 m
1/2” at 80 yds 20 mm at 100 m
1/2” at 80 yds 20 mm at 100 m
1/2” at 100 yds 12 mm at 100 m
1/2” at 100 yds 16 mm at 100 m
1/2” at 100 yds 16 mm at 100 m
Mounting methods IntegratedPicatinny/Weaver
2 Ringsø 1.33”Not
included
2 Ringsø 1.18”Not
included
2 Ringsø 1.33”
Not included
2 Rings ø 1.18”
Not included
2 Ringsø 1.18”
Not included
2 Ringsø 1.18”
Not included
2 Ringsø 1.18”
Not included
DIMENSIONS
Length 2.4” / 62 mm 9.0” / 229 mm 9.0” / 229 mm 7.75” / 197 mm 7.75” / 197 mm 7.9” / 200 mm 6.3” / 160 mm 6.3” / 160 mm
Objective diameter 1.1” / 28 mm 1.85” / 47 mm 1.7” / 43 mm 1.85” / 47 mm 1.7” / 43 mm 1.5” / 38 mm 1.5” / 38 mm 1.5” / 38 mm
Tube diameter 1.33” 1.18” 1.33” 1.18” 1.18” 1.18” 1.18”
Maximum distance between rings***2 5.6” / 142 mm 5.6” / 142 mm 4.3” / 110 mm 4.3” / 110 mm 6.1” / 155 mm 4.5” / 115 mm 4.5” / 115 mm
Minimum distance between rings***3 1.77 “ / 45 mm 1.77 “ / 45 mm 1.77” / 45 mm 1.77” / 45 mm 2.0” / 50 mm 2.0” / 50 mm 2.0” / 50 mm
Maximum ring width***4
Weight sight only 3.0 oz/ 84 g 9.0 oz/ 260 g 8.3 oz/ 235 g 8.8 oz/ 250 g 7.9 oz/ 225 g 8.1 oz/ 230 g 7.4 oz/ 210 g 7.4 oz/ 210 g
Weight sight with integrated mount 3.7oz / 105 g
ARTICLE NUMBERS
4 MOA 11910 11406 11407
2 MOA 200018 12693 12691 12692 12690 11419 11417 200136
TECHNICAL SPECS
DISTANCE BETWEEN RINGS ***
Aimpoint Hunter Series
Aimpoint 9000 Series Aimpoint CompC3
Micro H-1
Hunter H34L
Hunter H30L
Hunter H34S
Hunter H30S
9000L
9000SC
9000SC-NV
APPLICATION AREAS
Hunters
Action shooters - - - - - - -
APPLICATION FIREARMS
Pistol - Revolver - - -
Bow - - - - - - -
Magnum Handgun1 - - -
Semi-automatic rifle
Rifle with short length action
Rifle with standard length action - - - -
Combination rifles
Drilling
primary use secondary use - not recommended
TECHNOLOGY- ACET (Advanced Circuit Efficiency Technology)- Working principle: Reflex collimator sight - red dot sight
OPTICAL DATA- LED (Light Emitting Diode) totally eye-safe- Light source wave length, 650 nm red light - Band Pass coating for NVD compatibility (9000SC-NV) - Absence of parallax - No centering required- Unlimited eye relief- Anti-reflex coating all surfaces & multi-layer coating objective lens - No magification (1X)
MECHANICAL DATA- Material housing and tube, high strength aluminium- Surface finish housing, anodized, semi-matte- Black Color housing
ENVIRONMENTAL DATA- Temperature range, -30° to +60°C (-20° to +140°F)- Fully waterproof - No radioactive material used- No laser emission
1 Optics must be mounted using two heavy duty steel mounting rings and a solid one piece mounting base designed specifically for use with these revolvers.
* MOA (minute of angle) 1 MOA ≈ 30 mm at 100 meters ≈ 1” at 100 yards
** A at room temperature & at setting 8 out of 12 ** B at room temperature & at start-up setting 7 ** C at room temperature & at setting 7 out of 10
Specifications are subject to change without notice.
General TECHNICAL DATA
FEATURES FOR ALL AIMPOINT RED DOT SIGHTS
Warranty InformationAimpoint values your business and always attempts to provide you the very best of products and services. That’s why we back our products with one of the best guarantees in the industry. Our products are guaranteed to be free from original manufacturer defects in material and/or workmanship under normal use from the date of purchase for ten (10) years for personal use and two (2) years for professional or competition use.
Customer Service & Dealership EligibilityFor dealership eligibility and information about customer service, please scan the code or follow the link.
www.aimpoint.com/customerservice www.aimpoint.com/dealership10
-
When the time comes to take the shot, there should be no ques-tion that you can count on your sight to perform. We believe that a weapon sight should simplify aiming while meeting the highest possible requirements for reliability and ruggedness. We know that conditions in the field place extreme demands on your equipment, so we design and test Aimpoint products to stand up to any condition you are likely to encounter. We also design our products to operate constantly for years on a single battery so your sight will be ready when you are.
The Aimpoint Philosophy
Aimpoint, Inc.14103 Mariah CourtChantilly, VA 20151
Phone 703.263.9795Fax 703.263.9463
E-mail: [email protected]
www.aimpoint.com
Photographers: Peter Ozberg, Mikael Grennard, Sussi Lorinder, Yamil Sued, Tony Bynum, Michael Anscheutz Art Direction and Layout: Thorn Reklambyrå, Printing House: Exaktaprinting, Malmö, SWEDEN
This printed material is for information purposes only and does not constitute any binding obligation or agreement by Aimpoint ABAll rights reserved. © 2015 Aimpoint AB. Art. No. M01982