cat - hastings deering engine model cat® c4.4 stage iiia dit gross power 63 kw 84 hp maximum torque...
TRANSCRIPT
SpecificationsEngineModel Cat® C4.4 Stage IIIA DITGross Power 63 kW 84 hpMaximum Torque 353 Nm/1400 rpmDisplacement 4.4 litre
WeightsOperating Weight with Carriage and Forks 5897 kg
Operating SpecificationsRated Load Capacity 2500 kgMaximum Lift Height 5600 mmMaximum Forward Reach 3250 mmTop Travel Speed 26 km/hLoad at Max Height 2500 kgLoad at Max Reach 940 kgTurning Radius Over Tyres 3200 mmTurning Radius Over Forks 4254 mm
Service Refill CapacitiesFuel Tank 91 litreHydraulic System 98 litre
TyresStandard 14.00 x 17.5 Foam Filled
BrakesService Brakes Inboard wet disc brakes on front axleParking Brakes Wet disc spring-applied hydraulic release• Light on dash indicates when brake is on.
Axles• Planetary on front and rear axles.• High bias limited slip differential on front axle.
Hydraulic System — ImplementPump Type Single Section Gear PumpMaximum system pressure 240 barMaximum Pump Flow 85 litre/min• Auxiliary Hydraulic Circuit used for all attachments
equipped with cylinders or other hydraulic components. Consists of valves, controls, and hydraulic lines.
TransmissionTransmission HydrostaticForward Variable SpeedReverse Variable Speed
Boom PerformanceBoom Up 6.2 SecondsBoom Down 4.3 SecondsTele In 3.4 SecondsTele Out 6.3 SecondsBucket Dump 2.0 SecondsBucket Crowd 2.4 SecondsDrawbar Pull (Loaded) 38.7 kN
Instruments• Indicators for machine hours, fuel-level, steer mode,
steering pressure, battery charge, coolant temperature, parking brake and engine pre-heat.
• Reverse motion alarm.• Panel and switches are illuminated for night operation.
Cat®
TH255Telehandler
For more complete information on Cat products, dealer services, and industry solutions, visit us on the web at www.cat.com
© 2009 Caterpillar All rights reserved.
CAT, CATERPILLAR, their respective logos, “Caterpillar Yellow” and the POWER EDGE trade dress, as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.
2 m
3 m
4 m
5 m
6 m
1 m
0 m
4 m 3 m 2 m 1 m 0 m600 mm
C
DE
BA
0°
10°
20°
30°
40°
50°
60°
70°
940
kg 1500
kg 20
00 k
g 2500
kg
2500 kg
TL255
-1010 20
30 4050 60
7080
TL255
-1010 20
30 4050 60
7080
TL255
-10 10 20 3040 50
60 7080
TL255
Load Chart and Dimensions
AEHQ6033-01 (10-2009)
1920 mm
2290 mm
3660 mm
279 mm
1820 mm
TH255 Telehandler
Dimensions
All dimensions are approximate.
IMPORTANTRated lift capacities shown are with machine equipped with standard carriage and pallet forks. When lifting loads, the machine requires a firm surface with undamaged, properly inflated tyres. Machine specifications and stability are based on rated lift capacities at specific boom angles and boom lengths. (If specifications are critical, the proposed application should be discussed with your dealer.)
DO NOT exceed rated lift capacity loads, as unstable and dangerous machine conditions will result.
DO NOT tip the machine forward to determine the allowable load.
Due to continuous product improvements, machine specifications and/or equipment changes may be made without prior notification. This machine meets or exceeds AS1418.19-2007 as originally manufactured for intended applications.
Cat®
TH336Telehandler
SpecificationsEngineEngine
Standard Cat®C4.4DITAACOptional Cat®C4.4DITAAC-ACERT™
GrossPowerStandard 74.5kW/101hpOptional 93.1kW/126hp
MaximumTorqueStandard 410Nm/1400rpmOptional 496Nm/1400rpm
Bore 105mmStroke 127mmDisplacement 4.4litre• Allenginehorsepower(hp)aremetric.
WeightsOperatingWeight
Non-Agriculture 6573kgAgriculture 6693kg
Operating SpecificationsRatedLoadCapacity 3000kgMaximumLiftHeight 6100mmMaximumForwardReach 3109mmTopTravelSpeed 40km/hLoadatMaxHeight 2250kgLoadatMaxReach 975kgTurningRadiusOverTyres 3700mmTurningRadiusOverForks 4670mm
Service Refill CapacitiesFuelTank 150litreHydraulicTank 90litre
TyresStandard 15.5/80-2416PR
BrakesServiceBrakes ServoassistedonfrontaxleParkingBrakes Mechanicalonfrontaxle
SoundOperatorSound 78dB(A)ExteriorSound
74.5kWEngine 106dB(A)93.1kWEngine 107dB(A)
Hydraulic SystemMaximumSystemPressure 250barMaximumPumpFlow 113litre/minPumpType VariableDisplacement
LoadSensingAxialPistonPump
AuxiliaryHydraulicSupplyIntermittent 80litre/minContinuous 60litre/min
Transmission SpeedsForward
1 7km/h2 12km/h3 21km/h4 32km/h5* 40km/h
Reverse1 7km/h2 12km/h3 21km/h
*ACERTengineoptiononly
Boom PerformanceBoomUp 6.0SecondsBoomDown 4.0SecondsTeleIn 5.0SecondsTeleOut 5.0SecondsCrowdForward(dump) 3.0SecondsCrowdBackward 3.0SecondsCombined
UpandOut 10.0SecondsDownandIn 7.0Seconds
DrawbarPull74.5kW 82,4kNDrawbarPull93kW 86,8kNBucketBreakoutForcetoISO8313 55kNBoomBreakoutForce 36kN
FormorecompleteinformationonCatproducts,dealerservices,andindustrysolutions,visitusonthewebatwww.cat.com
©2010CaterpillerAllrightsreserved.
CAT,CATERPILLAR,theirrespectivelogos,“CaterpillarYellow”andthePOWEREDGEtradedress,aswellascorporateandproductidentityusedherein,aretrademarksofCaterpillarandmaynotbeusedwithoutpermission.
7 m
6 m
5 m
4 m
3 m
2 m
1 m
4 m 3 m 2 m 1 m600 mm
10º
20º
30º
40º
50º
67.5º
0º
2700 kg
3000 kg
2250 kg
1300
kg
975
kg
1750
kg
1500
kg
TH336 Telehandler
Dimensions
Alldimensionsareapproximate.
Load Chart and Dimensions
430mm
375mm
4621mm
4253mm
2950mm
1753mm
2323mm
920mm–agricultural880mm–nonagricultural
1988mm
2400mm
AEHQ6050-02(03-2010)
IMPORTANTRatedliftcapacitiesshownarewithmachineequippedwithstandardcarriageandpalletforks.Whenliftingloads,themachinerequiresafirmsurfacewithundamaged,properlyinflatedtyres.Machinespecificationsandstabilityarebasedonratedliftcapacitiesatspecificboomanglesandboomlengths.(Ifspecificationsarecritical,theproposedapplicationshouldbediscussedwithyourdealer.)
DONOTexceedratedliftcapacityloads,asunstableanddangerousmachineconditionswillresult.
DONOTtipthemachineforwardtodeterminetheallowableload.
Duetocontinuousproductimprovements,machinespecificationsand/orequipmentchangesmaybemadewithoutpriornotification.ThismachinemeetsorexceedsAS1418.19-2007asoriginallymanufacturedforintendedapplications.Whenutilisingasuspendedload,theJLGLoadManagementIndicatorSystem(LMIS)mustbeinstalledinordertoremaincompliantwithAS1418.19-2007.
SpecificationsEngineModel
Standard Cat®C4.4DITAACOptional Cat®C4.4DITAACACERT™
GrossPowerStandard 74.5kW/101hpOptional 93.1kW/126hp
MaximumTorqueStandard 410Nm/1400rpmOptional 496Nm/1400rpm
Bore 105mmStroke 127mmDisplacement 4.4litre• Allenginehorsepower(hp)aremetric.
WeightsOperatingWeightwithCarriage&Forks
Non-Agriculture 7200kgAgriculture 7320kg
Operating SpecificationsRatedLoadCapacity 3700kgMaximumLiftHeight 6100mmMaximumForwardReach 3109mmTopTravelSpeed 40km/hLoadatMaxHeight 2500kgLoadatMaxReach 1500kgOutsideTurningRadiusOverTyres 3700mmOutsideTurningRadiusOverForks 4670mm
Service Refill CapacitiesFuelTank 150litreHydraulicTank 90litre
TyresStandard 15.5/80-2416PR
BrakesServiceBrakes ServoassistedonfrontaxleParkingBrakes Mechanicalonfrontaxle
SoundOperatorSound 78dB(A)ExteriorSound
(74.5kWEngine) 106dB(A)(93.1kWEngine) 107dB(A)
Hydraulic SystemMaximumSystemPressure 250barMaximumPumpFlow 150litre/minPumpType Variabledisplacement loadsensingaxial pistonpumpAuxiliaryHydraulicSupply
Intermittent 80litre/minContinuous 60litre/min
Transmission SpeedsForward
1 7km/h2 12km/h3 21km/h4 32km/h5(ACERT engine option only) 40km/h
Reverse1 7km/h2 12km/h3 21km/h
Boom PerformanceBoomUp 5.0SecondsBoomDown 4.0SecondsTeleIn 4.5SecondsTeleOut 5.0SecondsCrowdForward(dump) 3.0SecondsCrowdBackward 3.0SecondsCombined
UpandOut 8.0SecondsDownandIn 6.0Seconds
DrawbarPull74.5kW 82,4kNDrawbarPull93.1kW 86,8kNBucketBreakoutForcetoISO8313 55kNBoomBreakoutForce 36kN
Cat®
TH406Telehandler
FormorecompleteinformationonCatproducts,dealerservices,andindustrysolutions,visitusonthewebatwww.cat.com
©2010CaterpillarAllrightsreserved.
CAT,CATERPILLAR,theirrespectivelogos,“CaterpillarYellow”andthePOWEREDGEtradedress,aswellascorporateandproductidentityusedherein,aretrademarksofCaterpillarandmaynotbeusedwithoutpermission.
A
B
C
0 m
1 m
2 m
3 m
4 m
5 m
6 m
4 m 3 m 2 m 1 m 0 m
500 mm
1500
kg
2000
kg
2500
kg
3000
kg
3700
kg
50°
40°
30°
20°
10°
0°
67.5°B
A
B
C
0 m
1 m
2 m
3 m
4 m
5 m
6 m
4 m 3 m 2 m 1 m 0 m
500 mm
1500
kg
2000
kg
2500
kg
3000
kg
3700
kg
50°
40°
30°
20°
10°
0°
67.5°B
TH406
Load Chart and Dimensions
TH406 Telehandler
Dimensions
Alldimensionsareapproximate.
HEHB3859-05(02-2010)
Load Chart and Dimensions
2382mm
1988mm
2323mm
1753mm
4253mm
2950mm
430mm
662mm
4621mm
920mm—agricultural880mm—non-agricultural
IMPORTANTRatedliftcapacitiesshownarewithmachineequippedwithcarriageandpalletforks.Themachinemustbelevelonafirmsurfacewithundamaged,properlyinflatedtyres.Machinespecificationsandstabilityarebasedonratedliftcapacitiesatspecificboomanglesandboomlengths.(Ifspecificationsarecritical,theproposedapplicationshouldbediscussedwithyourdealer.)
DONOTexceedratedliftcapacityloads,asunstableanddangerousmachineconditionswillresult.
DONOTtipthemachineforwardtodeterminetheallowableload.
Duetocontinuousproductimprovements,machinespecificationsand/orequipmentchangesmaybemadewithoutpriornotification.
SpecificationsEngineModel
Standard Cat®C4.4DITAACOptional Cat®C4.4DITAAC-ACERT™
GrossPowerStandard 74.5kW 101hpOptional 93.1kW 126hp
MaximumTorqueStandard 410Nm/1400rpmOptional 496Nm/1400rpm
Bore 105mmStroke 127mmDisplacement 4.4litre
WeightsOperatingWeightwithCarriage&Forks
Non-Agriculture 7700kgAgriculture 7820kg
Operating SpecificationsRatedLoadCapacity 3700kgMaximumLiftHeight 7300mmMaximumForwardReach 3763mmTopTravelSpeed 40km/hLoadatMaxHeight 2000kgLoadatMaxReach 1300kgTurningRadiusOverTyres 3750mmTurningRadiusOverForks 4740mm
Service Refill CapacitiesFuelTank 150litreHydraulicTank 90litre
TyresStandard 15.5/80-2416PR
BrakesServiceBrakes ServoassistedonfrontaxleParkingBrakes Mechanicalonfrontaxle
SoundOperatorSound 78dB(A)ExteriorSound
74.5kWEngine 106dB(A)93.1kWEngine 107dB(A)
Hydraulic SystemMaximumSystemPressure 250barMaximumPumpFlow 150litre/minPumpType Variabledisplacement loadsensingaxial pistonpumpAuxiliaryHydraulicSupply
Intermittent 80litre/minContinuous 60litre/min
Transmission SpeedsForward
1 7km/h2 12km/h3 21km/h4 32km/h5* 40km/h
Reverse1 7km/h2 12km/h3 21km/h
*ACERTengineoptiononly
Boom PerformanceBoomUp 7.5SecondsBoomDown 5.1SecondsTeleIn 4.8SecondsTeleOut 5.7SecondsCrowdForward(dump) 3.0SecondsCrowdBackward 3.0SecondsCombined
UpandOut 11.5SecondsDownandIn 6.6Seconds
DrawbarPull74.5kW 83,4kNDrawbarPull93.1kW 87,3kNBucketBreakoutForcetoISO8313 65kNBoomBreakoutForce 42kN
Cat®
TH407Telehandler
FormorecompleteinformationonCatproducts,dealerservices,andindustrysolutions,visitusonthewebatwww.cat.com
©2010CaterpillarAllrightsreserved.
CAT,CATERPILLAR,theirrespectivelogos,“CaterpillarYellow”andthePOWEREDGEtradedress,aswellascorporateandproductidentityusedherein,aretrademarksofCaterpillarandmaynotbeusedwithoutpermission.
5 m0 m
1 m
2 m
3 m
4 m
5 m
6 m
7 m
4 m 3 m 2 m 1 m 0 m600 mm
1300
kg
2000
kg
3700 kg
2000 kg
3000
kg
2500
kg
60°
50°
40°
30°
20°
10°
0°
67.5°
Load Chart and Dimensions
AEHQ6035-02(03-2010)
TH407 Telehandler
Dimensions
Alldimensionsareapproximate.
1988mm
920mm—agricultural880mm—non-agricultural
2382mm 5153mm
2385mm
1838mm
4679mm
3050mm962mm
430mm
IMPORTANTRatedliftcapacitiesshownarewithmachineequippedwithstandardcarriageandpalletforks.Whenliftingloads,themachinerequiresafirmsurfacewithundamaged,properlyinflatedtyres.Machinespecificationsandstabilityarebasedonratedliftcapacitiesatspecificboomanglesandboomlengths.(Ifspecificationsarecritical,theproposedapplicationshouldbediscussedwithyourdealer.)
DONOTexceedratedliftcapacityloads,asunstableanddangerousmachineconditionswillresult.
DONOTtipthemachineforwardtodeterminetheallowableload.
Duetocontinuousproductimprovements,machinespecificationsand/orequipmentchangesmaybemadewithoutpriornotification.ThismachinemeetsorexceedsAS1418.19-2007asoriginallymanufacturedforintendedapplications.Whenutilisingasuspendedload,theJLGLoadManagementIndicatorSystem(LMIS)mustbeinstalledinordertoremaincompliantwithAS1418.19-2007.
SpecificationsEngineModel Cat® C4.4 DITAACGross Power 74.5 kW/101 hpMaximum Torque 410 Nm/1400 rpmBore 105 mmStroke 127 mmDisplacement 4.4 litre
WeightsOperating Weight with Carriage & Forks 9550 kg
Operating SpecificationsRated Load Capacity
On Tyres 3700 kgOn Stabilizers 3700 kg
Maximum Lift Height Stabilizers Up 13 700 mmStabilizers Down 13 700 mm
Maximum Forward Reach 9225 mmTop Travel Speed 32 km/hLoad at Max Height
Stabilizers Up 1250 kgStabilizers Down 2500 kg
Load at Max ReachStabilizers Up 350 kgStabilizers Down 1000 kg
Outside Turning Radius Over Tyres 3805 mmOutside Turning Radius Over Forks 5640 mmDrawbar Pull 74.5 kW 88,0 kN
Service Refill CapacitiesFuel Tank 150 litreHydraulic Tank 90 litre
TyresStandard 15.5/80-24 16PR
BrakesService Brakes Servo assisted on front axleParking Brakes Mechanical on front axle
Hydraulic SystemMaximum System Pressure 250 barMaximum Pump Flow 113 litre/minPump Type Variable displacement load sensing axial piston pumpAuxiliary Hydraulic Supply
Intermittent 80 litre/minContinuous 60 litre/min
Transmission SpeedsForward
1 7 km/h2 12 km/h3 21 km/h4 32 km/h
Reverse1 7 km/h2 12 km/h3 21 km/h
Boom PerformanceBoom Up 13.0 SecondsBoom Down 8.0 SecondsTele In 11.0 SecondsTele Out 11.0 SecondsCrowd Forward (dump) 3.0 SecondsCrowd Backward 3.0 SecondsCombined
Up and Out 23.0 SecondsDown and In 13.4 Seconds
Bucket Breakout Force to ISO 8313 65 kNBoom Breakout Force 45 kN
SoundOperator Sound 78 dB(A)Exterior Sound (74.5 kW Engine) 106 dB(A)
Cat®
TH414Telehandler
For more complete information on Cat products, dealer services, and industry solutions, visit us on the web at www.cat.com
© 2010 Caterpillar All rights reserved.
CAT, CATERPILLAR, their respective logos, “Caterpillar Yellow” and the POWER EDGE trade dress, as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.
Stabilizers DownStabilizers Up
9 m 8 m 7 m 6 m 5 m 4 m 3 m 2 m 1 m 0 m 9 m 8 m 7 m 6 m 5 m 4 m 3 m 2 m 1 m 0 m-1 m
0 m
1 m
2 m
3 m
4 m
5 m
6 m
7 m
8 m
9 m
10 m
11 m
12 m
13 m
14 m
-1 m
0 m
1 m
2 m
3 m
4 m
5 m
6 m
7 m
8 m
9 m
10 m
11 m
12 m
13 m
14 m
600 mm 600 mm
75°
60°
50°
40°
30°
20°
10°
0°
75°
60°
50°
40°
30°
20°
10°
0°
350
kg50
0 kg
750
kg
1000
kg
1500
kg 25
00 k
g
3700
kg
3000 kg
2000 kg
1250 kg
2500
kg
1000
kg
1500
kg
2500 kg
3700
kg
3000
kg
2000
kg
Load Chart and Dimensions
TH414 Telehandler
Dimensions
All dimensions are approximate.880 mm
2036 mm
2449 mm
2592 mm
1979 mm
3200 mm
458 mm
5091 mm6325 mm
1225 mm
AEHQ6036 02(12-2010)
IMPORTANTRated lift capacities shown are with machine equipped with standard carriage and pallet forks. When lifting a load, the machine requires a firm surface with undamaged, properly inflated tyres. Machine specifications and stability are based on rated lift capacities at specific boom angles and boom lengths. (If specifications are critical, the proposed application should be discussed with your dealer.)
DO NOT exceed rated lift capacity loads, as unstable and dangerous machine conditions will result.
DO NOT tip the machine forward to determine the allowable load.
Due to continuous product improvements, machine specifications and/or equipment changes may be made without prior notification.
This machine meets or exceeds AS1418.19-2007 as originally manufactured for intended applications. When utilising a suspended load, the JLG Load Management Indicator System (LMIS) must be installed in order to remain compliant with AS1418.19-2007.
EngineModel Cat®C4.4DITAACGrossPower 74.5kW/101hpMaximumTorque 410Nm/1400rpmBore 105mmStroke 127mmDisplacement 4.4litre
WeightsOperatingWeightwithCarriage&Forks 11800kg
Operating SpecificationsRatedLoadCapacity 4000kgMaximumLiftHeight
StabilizersUp 15290mmStabilizersDown 17300mm
MaximumForwardReach 12900mmTopTravelSpeed 32km/hLoadatMaxHeight
StabilizersUp 500kgStabilizersDown 3000kg
LoadatMaxReachStabilizersUp 0kgStabilizersDown 500kg
OutsideTurningRadiusOverTyres 3920mmOutsideTurningRadiusOverForks 5650mm
Service Refill CapacitiesFuelTank 150litreHydraulicTank 90litre
TyresStandard 14.00-2416PRTG02
BrakesServiceBrakes ServoassistedonfrontaxleParkingBrakes Mechanicalonfrontaxle
Hydraulic SystemMaximumSystemPressure 250barMaximumPumpFlow 150litre/minPumpType Variabledisplacement loadsensingaxial pistonpumpAuxiliaryHydraulicSupply
Intermittent 80litre/minContinuous 60litre/min
Transmission SpeedsForward
1 7km/h2 12km/h3 21km/h4 32km/h
Reverse1 7km/h2 12km/h3 21km/h
Boom PerformanceBoomUp 16.0SecondsBoomDown 13.0SecondsTeleIn 20.0SecondsTeleOut 25.0SecondsCrowdForward(dump) 3.4SecondsCrowdBackward 3.0SecondsCombined
UpandOut 30.0SecondsDownandIn 23.0Seconds
DrawbarPull74.5kW 88,0kNBucketBreakoutForcetoISO8313 65kNBoomBreakoutForce 60kN
SoundOperatorSound 78dB(A)ExteriorSound(74.5kWEngine) 106dB(A)
Specifications
Cat®
TH417Telehandler
FormorecompleteinformationonCatproducts,dealerservices,andindustrysolutions,visitusonthewebatwww.cat.com
©2010CaterpillarAllrightsreserved.PrintedinU.S.A
Materialsandspecificationsaresubjecttochangewithoutnotice.Featuredmachinesinphotosmayincludeadditionalequipment.SeeyourCatdealerforavailableoptions.
CAT,CATERPILLAR,theirrespectivelogos,“CaterpillarYellow”andthePOWEREDGEtradedress,aswellascorporateandproductidentityusedherein,aretrademarksofCaterpillarandmaynotbeusedwithoutpermission.
9 m 8 m10 m11 m12 m13 m 7 m 6 m 5 m 4 m 3 m 2 m 1 m 0 m-1 m
0 m
1 m
2 m
3 m
4 m
5 m
6 m
7 m
8 m
9 m
10 m
11 m
12 m
13 m
14 m
15 m
16 m
17 m
18 m
Stabilizers Up
TH417
9 m 8 m10 m11 m12 m13 m 7 m 6 m 5 m 4 m 3 m 2 m 1 m 0 m-1 m
0 m
1 m
2 m
3 m
4 m
5 m
6 m
7 m
8 m
9 m
10 m
11 m
12 m
13 m
14 m
15 m
16 m
17 m
18 m
Stabilizers Up
TH417
270
0 kg
200
0 kg 1
500
kg
100
0 kg
500
kg
250
kg
4000 kg3700 kg
270
0 kg
200
0 kg 1
500
kg
100
0 kg
500
kg
250
kg
4000 kg2700 kg
600 mm
60°
50°
40°
30°
20°
10°
0°
600 mm
60°
50°
40°
30°
20°
10°
0°
9 m 8 m10 m11 m12 m13 m 7 m 6 m 5 m 4 m 3 m 2 m 1 m 0 m-1 m
0 m
1 m
2 m
3 m
4 m
5 m
6 m
7 m
8 m
9 m
10 m
11 m
12 m
13 m
14 m
15 m
16 m
17 m
18 m
Stabilizers Down
TH417
9 m 8 m10 m11 m12 m13 m 7 m 6 m 5 m 4 m 3 m 2 m 1 m 0 m-1 m
0 m
1 m
2 m
3 m
4 m
5 m
6 m
7 m
8 m
9 m
10 m
11 m
12 m
13 m
14 m
15 m
16 m
17 m
18 m
Stabilizers Down
TH417
500
kg
1000
kg
2000
kg 300
0 kg 4000 kg
500
kg
1000
kg
2000
kg 300
0 kg 4000 kg
600 mm
60°
70°72°
50°
40°
30°
20°
10°
0°
600 mm
60°
70°72°
50°
40°
30°
20°
10°
0°
Ratedliftcapacitiesshownarewithmachineequippedwithcarriageandpalletforks.Themachinemustbelevelonafirmsurfacewithundamaged,properlyinflatedtyres.Machinespecificationsandstabilityarebasedonratedliftcapacitiesatspecificboomanglesandboomlengths.(Ifspecificationsarecritical,theproposedapplicationshouldbediscussedwithyourdealer.)
DONOTexceedratedliftcapacityloads,asunstableanddangerousmachineconditionswillresult.
DONOTtipthemachineforwardtodeterminetheallowableload.
Duetocontinuousproductimprovements,machinespecificationsand/orequipmentchangesmaybemadewithoutpriornotification.
ThismachinemeetsorexceedsAS1418.19-2007asoriginallymanufacturedforintendedapplications.Whenutilisingasuspendedload,theJLGLoadManagementIndicatorSystem(LMIS)mustbeinstalledinordertoremaincompliantwithAS1418.19-2007.
IMPORTANT
AEHQ6148(08-2010)
Load Chart and Dimensions
2078mm
2440mm
2630mm
2080mm
3200mm
401mm
5135mm
6670mm
1275mm
TH417 Telehandler
Dimensions
Alldimensionsareapproximate.880mm
SpecificationsEngineModel Cat®C4.4DITAACGrossPower 74.5kW/101hpMaximumTorque 410Nm/1400rpmBore 105mmStroke 127mmDisplacement 4.4litre
WeightsOperatingWeightwithCarriage&Forks 11000kg
Operating SpecificationsRatedLoadCapacity
OnTyres 4600kgOnStabilizers 5000kg
MaximumLiftHeightStabilizersUp 13380mmStabilizersDown 14000mm
MaximumForwardReach 9225mmTopTravelSpeed 32km/hLoadatMaxHeight
StabilizersUp 1800kgStabilizersDown 2000kg
LoadatMaxReachStabilizersUp 500kgStabilizersDown 1200kg
OutsideTurningRadiusOverTyres 3920mmOutsideTurningRadiusOverForks 5570mmDrawbarPull74.5kW 88,0kN
Service Refill CapacitiesFuelTank 150litreHydraulicTank 90litre
TyresStandard 14.00-24TG-02
BrakesServiceBrakes ServoassistedonfrontaxleParkingBrakes Mechanicalonfrontaxle
Hydraulic SystemMaximumSystemPressure 250barMaximumPumpFlow 150litre/minPumpType Variabledisplacement loadsensingaxial pistonpumpAuxiliaryHydraulicSupply
Intermittent 80litre/minContinuous 60litre/min
Transmission SpeedsForward
1 7km/h2 12km/h3 21km/h4 32km/h
Reverse1 7km/h2 12km/h3 21km/h
Boom PerformanceBoomUp 17.0SecondsBoomDown 10.0SecondsTeleIn 20.0SecondsTeleOut 17.5SecondsCrowdForward(dump) 4.0SecondsCrowdBackward 3.0SecondsCombined
UpandOut 28.0SecondsDownandIn 19.0Seconds
BucketBreakoutForcetoISO8313 95kNBoomBreakoutForce 63kN
SoundOperatorSound 78dB(A)ExteriorSound(74.5kWEngine) 106dB(A)
Cat®
TH514Telehandler
FormorecompleteinformationonCatproducts,dealerservices,andindustrysolutions,visitusonthewebatwww.cat.com
©2010CaterpillarAllrightsreserved.PrintedinU.S.A
Materialsandspecificationsaresubjecttochangewithoutnotice.Featuredmachinesinphotosmayincludeadditionalequipment.SeeyourCatdealerforavailableoptions.
CAT,CATERPILLAR,theirrespectivelogos,“CaterpillarYellow”andthePOWEREDGEtradedress,aswellascorporateandproductidentityusedherein,aretrademarksofCaterpillarandmaynotbeusedwithoutpermission.
AEHQ6083-01(08-2010)
Stabilizers Up
0 m1 m2 m3 m4 m5 m6 m7 m8 m9 m10 m11 m-1 m
0 m
1 m
2 m
3 m
4 m
5 m
6 m
7 m
8 m
9 m
10 m
11 m
12 m
13 m
14 m
15 m
70º
30º
40º
50º
60º
20º
10º
0º
4600 kg
TH514
600 mm
500
kg 1000
kg
1350
kg
1800
kg
2500
kg
3450
kg
4300
kg
Stabilizers Up
0 m1 m2 m3 m4 m5 m6 m7 m8 m9 m10 m11 m-1 m
0 m
1 m
2 m
3 m
4 m
5 m
6 m
7 m
8 m
9 m
10 m
11 m
12 m
13 m
14 m
15 m
70º
30º
40º
50º
60º
20º
4600 kg
TH514
600 mm
500
kg 1000
kg
1350
kg
1800
kg
2500
kg
3450
kg
4300
kg
10º
0º
Stabilizers Down
75º
40º
50º
60º
70º
30º
20º
10º
0º
2000 kg
0 m1 m2 m3 m4 m5 m6 m7 m8 m9 m10 m11 m-1 m
0 m
1 m
2 m
3 m
4 m
5 m
6 m
7 m
8 m
9 m
10 m
11 m
12 m
13 m
14 m
15 m
TH514
600 mm
4000
kg
5000 kg5000 kg
2600
kg
3000
kg
2000
kg
1200
kg
Stabilizers Down
75º
40º
50º
60º
30º
20º
10º
0º
2000 kg
0 m1 m2 m3 m4 m5 m6 m7 m8 m9 m10 m11 m-1 m
0 m
1 m
2 m
3 m
4 m
5 m
6 m
7 m
8 m
9 m
10 m
11 m
12 m
13 m
14 m
15 m
TH514
600 mm
4000
kg
5000 kg5000 kg
2600
kg
3000
kg
2000
kg
1200
kg
Load Chart and Dimensions
TH514 Telehandler
Dimensions
Alldimensionsareapproximate.880mm
2078mm
2440mm
2630mm
1979mm
3200mm
401mm
5091mm6520mm
1225mm
IMPORTANTRatedliftcapacitiesshownarewithmachineequippedwithstandardcarriageandpalletforks.Whenliftingaload,themachinerequiresafirmsurfacewithundamaged,properlyinflatedtyres.Machinespecificationsandstabilityarebasedonratedliftcapacitiesatspecificboomanglesandboomlengths.(Ifspecificationsarecritical,theproposedapplicationshouldbediscussedwithyourdealer.)
DONOTexceedratedliftcapacityloads,asunstableanddangerousmachineconditionswillresult.
DONOTtipthemachineforwardtodeterminetheallowableload.
Duetocontinuousproductimprovements,machinespecificationsand/orequipmentchangesmaybemadewithoutpriornotification.
ThismachinemeetsorexceedsAS1418.19-2007asoriginallymanufacturedforintendedapplications.Whenutilisingasuspendedload,theJLGLoadManagementIndicatorSystem(LMIS)mustbeinstalledinordertoremaincompliantwithAS1418.19-2007.