castors wheels - find the needlepdfs.findtheneedle.co.uk/108419-1185.pdf · 2014. 10. 1. · 4 ross...

CA S T O R S W H E E L S&

Soft Tread WheelsSoft tread means more resistance, which may result in being harder to push. They are however, quieter and kinder to the floors. Rubber, Non Marking Rubber, Polyurethane, High Temperature Rubber and Pneumatic wheels.

A Quick Guide to Selecting Castors & Wheels

CASTORSIn order to select the appropriate castors you must consider the following; load capacity, castor fittings and environmental conditions. Load CapacityFor the castor to be effective, you must consider the total load of the unit you wish to manoeuvre. You can use the following equation to determine your load capacity per castor.

Load Capacity ofCastor

Unit Load + Weight of Equipment

3

= 1

TON

For example a trolley requiring 4 castors, you take the total weight of the trolley, plus the maximum weight the trolley is to carry, and divide by 3. This will give you the load capacity requirement for each castor, allowing for a margin of safety. The margin of safety is built in to allow for different working conditions and uneven floor surfaces. Once you have your maximum load requirement, the next decision is to choose a castor fitting.

This guide is to help you identify the correct castors or wheels for your requirements.

Castor Fittings - Bolt Hole FittingA single central bolt hole fixing, with a swivelling castor housing and a bolt hole diameter of either M12 or M10. Can be fitted with a tubular expander to fit either round or square tubing. Swivel with brake is available.

Castor Fittings - Top Plate FittingA rectangular or square plate with 4 fixing bolts. The 4 bolts provide a strong fixing and distribute the weight evenly. Can be either swivelling castor, fixed or swivel with a brake.

WHEELSIn general the larger the wheel the more weight it can carry and the easier it is to move. Bearings in wheels will help to reduce friction and ease movement. Wheels can be divided into two categories. Hard Tread WheelsEasiest to push, least resistance, but can be noisy and damage certain floors. Available in Cast Iron and Steel, Nylon, Polypropylene and Phenolic ( High Temp ).

BEARINGSThere are 4 types of bearings which can help reduce rolling resistance. The choice, like the wheels, depends upon the application, working environment, load capacities and the amount of movement required. Plain Bearings - for light loads moving over short distances Roller Bearings- reduces resistance for heavy loads on short distances Ball Journal – precision bearings for heavy loads with constant movement Tapered Roller Bearing – for the largest loads.

SPECIAL APPLICATIONSWe also offer a range of special application castors and wheels, such as heat resistant, stainless steel, aluminium castors, scene shifters and low level castors, jacking and gate castors. For special application wheels we can offer antistatic, high temperature, wheelchair wheels, trolley wheels, v- grooved and flanged steel wheels. For more information please call: 0116 276 4987

Ross Handling Tel: 0116 2764 987 or Email: [email protected]

Twin Wheel Castors

Display & PoS Castors

Furniture Castors

Designer Castors

Bolt Hole Castors

Institutional Castors

Light Industrial Castors

Medium Industrial Castors

Medium/Heavy Duty Castors

Anti-Static & High Temp Castors

Stainless Steel Castors

Extra Heavy Duty Castors

Fabricated Castors

Jacking Castors

Gate & Low Level Castors

Special Application Castors

Assorted Wheels

Special Application Wheels

Terms & Conditions

TELEPHONE ORDER LINE 0116 276 4987FAX ORDER LINE 0116 274 1751

Index

World Class Supplier of Castors & Wheels

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20 - 25

26

27

71 Cannock Street Leicester LE4 9HRE-mail: [email protected]

www.rosshandling.co.uk

ROSS HANDLING LIMITED

Ross Handling Tel: 01162764987 or Email: [email protected]

4 Ross Handling Tel: 0116 2764 987 or Email: [email protected]

Twin Wheel Castors

TW SeriesAn inexpensive range of black plastic 40mm and 50mm hooded twin wheeled castors. Available with M8 & M10 threaded stems and plate fixings. Suitable for use on light domestic equipment, video stands, office furniture, point of sale and display equipment. All sizes can be supplied with or without footbrakes. The 75mm heavy duty version is unhooded and can be supplied with M10 stems (2 lengths) or with flat top plates.

Wheel Diam.

Threaded Stems Castor Height Load

CapacityUnbraked Reference Braked Reference

40mm M8 x 15mm 52mm 40kg TW4001 M8 x 15 TW4001 M8 x 15/B






Wheel Diam. Plate Size Bolt

Diam.Castor Height

Load Capacity

Unbraked Reference Braked Reference

40mm 38mm x 38mm27mm x 27mm 5mm 54mm 40kg TW4004 TW4004/B



Wheel Diam. Fixings Castor

HeightLoad

CapacityNylon Wheel Reference

Rubber Wheel Reference

50mm M10 x 30mm 54mm 50kg TW500 M10 CIRCLIP -

50mm M11 x 22mm 57mm 50kg TW500 M11 CIRCLIP -

50mm M10 x 30mm 54mm 50kg - TWR500 M10 CIRCLIP

50mm M11 x 22mm 57mm 50kg - TWR500 M11 CIRCLIP

TW Series (Circlip)

Ideal for office chairs. Available in black nylon or soft grey rubber wheels.

The twin wheeled castors can be supplied complete (as shown) or with loose top plates for ease of fitting.

The twin wheeled castors can be supplied complete (as shown) or with loose threaded stems for ease of fitting. Wood Inserts, Tee-Nuts, Weld-on-Nuts also available as optional extras.

Threaded Stem Fittings

Plate Fitting

5Ross Handling

Display & PoS Castors

FS SeriesA range of light/medium pressed steel swivel castors for use on point of sale, display racks, etc., available with 8mm bolt hole fitting. Can be supplied with black plastic or grey rubber tyred wheels. 10mm bolt hole available to special order. Braked or unbraked.

Wheel Diam. Wheels Overall

HeightLoad

CapacityUnbraked Reference

Braked Reference

50mm Black plastic 70mm 55kg FS-N2013 FS-N2013/BR

50mm *Grey rubber 70mm 50kg FS-P2013 FS-P2013/BR

*The rubber tyred wheels are fitted with threadguards.

FS SeriesSome range as above but fitted with flat top plates. Avaliable with 50mm black plastic or grey rubber wheels. Braked or unbraked.


HeightLoad Capc.

Plate size / Hole centres

Unbraked Ref. Braked Ref

50mm Black plastic 72mm 55kg 50mm x 50mm

36mm x 36mm FS-N2014 FS-N2014/BR

50mm *Grey rubber 72mm 50kg 50mm x 50mm

36mm x 36mm FS-P2014 FS-P2014/BR

*The rubber tyred wheels are fitted with threadguards. Bolt size: 6mm.

Plate Fitting

360 SeriesSize: 50mm & 75mm

Twin wheeled castors suitable for a wide range of light duty applications. Available with M10 single bolt hole fixings. Braked or unbraked can be fitted with Black Polypropylene or Grey Rubber tyred wheels.


HeightLoad Capc.

Unbraked Reference

Braked Reference

50mm Black plastic 72mm 60kg 50-360-P-BH10 50-360-P-BH10/SWB

50mm Grey rubber 72mm 60kg 50-360-R-BH10 50-360-R-BH10/SWB

75mm Black plastic 98mm 90kg 75-360-P-BH10 75-360-P-BH10/SWB

75mm Grey rubber 100mm 90kg 75-360-R-BH10 75-360-R-BH10/SWB

Bolt Hole Fitting

360 SeriesSize: 50mm & 75mm

Twin wheeled castors suitable for a wide range of light duty applications. Available with flat top plate fixings. Braked or unbraked can be fitted with Black Polypropylene or Grey Rubber tyred wheels.

Plate size: 60mm x 60mm, centres (48/38mm x 48/38mm)


HeightLoad Cap.

Unbraked Reference

Braked Reference

50mm Black plastic 72mm 60kg 50-360-P-FP 50-360-P-FP/SWB

50mm Grey rubber 72mm 60kg 50-360-R-FP 50-360-R-FP/SWB

75mm Black plastic 98mm 90kg 75-360-P-FP 75-360-P-FP/SWB

75mm Grey rubber 100mm 90kg 75-360-R-FP 75-360-R-FP/SWB

Plate Fitting

Threadgaurds only to special order, not fitted as standard.

Bolt Hole Fitting

Tel: 0116 2764 987 or Email: [email protected]

6 Ross Handling

Furniture Castors

Type Wheel Diam. Wheels Fittings Overall

Height Capacity Reference

FF 41mm Black Plastic

Wood Socket 52mm 50kg FFK-41

FF 41mm Black Plastic

Round Plastic Sockets for 5/8” 3/4” 1” TubingSquare Plastic Sockets for 3/4/” 1” Tubing

SHEPHERD Series Shepherd Metal ball castors with and without rubber tyres. Available in 50mm and 63mm diameters. The 50mm is suitable for furniture, medium duty office equipment, small trolleys etc. The 63mm is a heavy duty version suitable for display racking, merchandisers, materials handling equipment etc

Wheel Diam.

Threaded Stems

Peg & Socket Top Plates Load

Capc.Peg & Socket Top Plates Threaded

Stems

50mm M-8 9.5 38 x 38(25.4 x 25.4) 50kg No. 46 No. 41 No. 44

63mm M-10 - 38 x 38(25.4 x 25.4) 75kg - No. 52 No. 54

Available in Beige colour. Alternatively in Dark Brown or Bright Nickel to special order.

OVERALL HEIGHTS: 50mm Castors 63mm to 82mm 63mm Castors 75mm to 90mm

Range of Fittings available Castor Reference

No. 1000 3/4” & 1” diameter

No. 1007 1” diameter

No. 1009 3/4” & 1” diameter

Flange fitting where height is restricted. Used for conveyor and transfer tables etc. Self cleaning hole standard. Method of attachment - self tapping screws, pop rivets, nuts and bolts.

Used for conveyor, transfer tables etc. Ball upwards only. Self cleaning hole standard.

Bolt fixing M8 thread. Stock lengths 25mm.

LOAD CAPACITY Diagrams are shown with 1” balls UPWARDS: 3/4” = 23kg 1” = 55kg DOWNWARDS: 3/4” = 10kg 1” = 25kg

Light duty swivel castors suitable for use on point of sale and display equipment. Can be supplied with metal sockets for wood fitting, and round or square plastic sockets for metal tubing.

FF Series

BALL TRANSFERSBall transfer units consist of a large ball seated in a quantity of small bearings in a hemispherical cup. The design allows the ball to rotate freely in any direction. Available in ¾” and 1” diameters.

NOVELTY CASTORSNew range of brightly coloured, novelty swivel castors in 50mm diameters. Ideal for use on playschool equipment. childrens furniture and fun applications. 4 colours are available with or without footbrakes. Can be fitted with threaded stems, circlip or plate fittings. Available to special order only.


7Ross Handling

Designer Castors

DS SeriesContemporary range of twin wheeled castors. Silver body with dark grey rubber tyres. Ideal for furniture and point of sale. Available with M.10 stems or Flat Top Plates, with or without footbrakes.

Wheel Diam. Fixings Overall Height Load Capacity


65mm M10 x 15mm 74mm 60kg DS65M10x15 DS65M10x15/B


65mm 38 x 38mm (27 x 27mm) 79mm 60kg DS654 DS654/B



75mm 38 x 38mm(27 x 27mm) 88mm 75kg DS7504 DS7504/B

BS SeriesElegant modern design castors with metallic silver finish and light grey rubber wheels. Available with M.10 stems or Flat Top Plates, with or without footbrakes.



75mm M10 x 15mm 92mm 100kg BS75M10x15 BS75M10x15/B

75mm M10 x 25mm 92mm 100kg BS75M10x25 BS75M10x25/B

75mm 65 x 65mm(47 x 47mm) 100mm 100kg BS754 BS754/B

ES SeriesNew slimline design castors. Ideal for display and furniture applications. Light grey body with dark grey rubber tyres. Available with M.10 stems or Flat Top Plates, with or without footbrakes.



80mm M10 x 15mm 110mm 60kg ES80M10x15 ES80M10x15/B


80mm 65 x 65mm(47 x 47mm) 114mm 60kg ES804 ES804/B



100mm 65 x 65mm(47 x 47mm) 131mm 70kg ES1004 ES1004/B

Tel: 0116 2764 987 or Email: [email protected] Tel: 0116 2764 987 or Email: [email protected]

GS SeriesSynthetic castor, ideal for use as a wheelchair castor or on medical equipment . Light grey body with dark grey non-marking tyres. Available in a 100,125 and 150mm diameter wheel. With either a 12mm bolt hole or plate fitting. With or without footbrakes



100mm M12 B/H 135mm 80Kg GS100M12 GS100M12/BR

100mm 90 X 70mm (70x50mm) 138mm 80Kg GS1004 GS1004/BR

125mm M12 B/H 161mm 100Kg GS125M12 GS125M12


150mm M12 B/H 189mm 100Kg GS150M12 GS150M12/BR


8 Ross Handling

Bolt Hole Castors

310 SeriesSize: 50mm, 75mm & 100mm

Light duty pressed steel swivel castors with 10mm bolt holes. Can be fitted with grey non-marking Rubber Tyred or Black Polypropylene wheels. Suitable for a wide range of light duty applications.

Wheel Diam. Tread Width Plated Finish Castor Height Swivel

RadiusSwivel Race

Diam.Bolt

Diameter Grey Rubber Black Polypropylene

2”50mm 22mm Zinc 73mm 45mm 41mm *10mm 50-310-R

60kg50-310-P

65kg

3”75mm **23mm Zinc 101mm 68mm 41mm *10mm 75-310-R

70kg75-310-P

75kg

4”100mm **26mm Zinc 124mm 75mm 41mm *10mm 100-310-R

80kg100-310-P

85kg

An alternative 100mm and 125mm castor is available in a chrome plated finish. Details on request.

* Bolt hole fitting requires a 20mm washer and a 10mm bolt. ** The 3” and 4” Polypropylene wheels have 22mm tread widths.

3” ANTI-STATIC WHEELS AVAILABLE TO SPECIAL ORDER

Castor Reference and Load Capacity

OPTIONAL EXTRASRound Expanding Tubular Adaptor

Expanding adaptors available for round tubing in the following sizes: Overall height of castors increased by 3mm. To order add suffix detailed in table to swivel castor reference.

Square Expanding Tubular Adaptor

Expanding adaptors available for square tubing in the following sizes: Overall height of castors increased by 3mm. To order add suffix detailed in table to swivel castor reference.

Combined Swivel and Wheel Brake (all sizes)

Simultaneously brakes both the swivel head and wheel. Release is affected by the trip pedal. To order add suffix ‘SWB’ to castor reference. Swivel Radius The swivel radius is increased when brakes are fitted. 50mm wheels: increased by 40mm 75mm wheels: increased by 32mm 100mm wheels: increased by 25mm

Spring Loaded Castors (For Mobile Steps)

Spring fitting for use with a 75mm castor. The standard spring compresses with a load of 26Kg.

Alternative spring strengths can be fitted but the maximum load capacity of the castor is 70Kg.

Expander Range Ref.

18 - 19.5mm R-18

19.5 - 21.7mm R-20

21.7 - 24.5mm R-22

24.5 - 27mm R-25

27mm - 29.5mm R-27

29.5 - 32mm R-30

Expander Range Ref.

20 - 22mm S-20

22 - 25mm S-22

25 - 28mm S-25

29 - 32mm S-29

36 - 38mm S-36

85mm

35mm

29mm

223mm

75mm

21mmtread


9Ross Handling

Institutional Castors

314 Seriesize: 50mm, 75mm & 100mm

Light duty pressed steel swivel castors with flat top plates. Available in grey non-marking Rubber Tyred or Black Polypropylene wheels. Suitable for a wide range of light duty applications.

Wheel Diam. Tread Width Plated Finish Castor Height Swivel

Radius Plate Size Bolt Diam. Grey Rubber Black Polypropylene

2”50mm 22mm Zinc 72mm 45mm 60mm x 60mm

48/38 x 48/38 6mm 50-314-R60kg

50-314-P65kg

3”75mm *23mm Zinc 101mm 68mm 60mm x 60mm

48/38 x 48/38 6mm 75-314-R70kg

75-314-P75kg

4”100mm *26mm Zinc 124mm 75mm 60mm x 60mm

48/38 x 48/38 6mm 100-314-R80kg

100-314-P85kg

* The 3” and 4” Polypropylene wheels have 22mm tread widths

3” ANTI-STATIC WHEELS AVAILABLE TO SPECIAL ORDER


OPTIONAL EXTRA


Foot operated wheel brake simultaneously brakes both the swivel head and wheel. Release is affected by the trip pedal. To order add suffix ‘ SWB ’ to the swivel castor reference.

Swivel Radius

The swivel radius is increased when brakes are fitted.

50mm wheels: increased by 40mm




10 Ross Handling

Light Industrial Castors

2260 Series Size: 80mm, 100mm & 125mm.

Double ball bearing swivel castors. Double ball race castors suitable for a wide range of light duty applications.Available with white nylon, grey non marking or black rubber tyred wheels.

Wheel Diam.

Tread Width Type Castor

Height Plate size Bolt hole spacing

Bolt Diam

Swivel Rad. White Nylon Grey Rubber Black Rubber

3" + 80mm *30mm Swivel 107mm 99 x 80mm 80 x 60mm 8mm 70mm 80-2260-NV

100kg80-2260-GV

50kg80-2260-PV

50kg

4”100mm *30mm Swivel 127mm 99 x 80mm 80 x 60mm 8mm 80mm 100-2260-NV

120kg100-2260-GV

70kg100-2260-PV

70kg

5” 125mm *39mm Swivel 155mm 99 x 80mm 80 x 60mm 8mm 100mm 125-2260-NV

150kg125-2260-GV

100kg125-2260-PV

100kg

*The tread shown is for nylon wheels. Rubber tyred wheels will be narrower as follows: 80mm = 23mm, 100mm = 23mm, 125mm = 26mm


2268 Series Size: 80mm, 100mm & 125mm.

Fixed castors suitable for a wide range of light duty applications. Available with white nylon, grey non marking or black rubber tyred wheels.

Wheel Diam.

Tread Width

Castor Type

Castor Height Plate size Bolt hole

spacingBolt

Diam White Nylon Grey Rubber Black Rubber

3" + 80mm *30mm Fixed 107mm 100 x 84mm 80 x 60mm 8mm 80-2268-NV

100kg80-2268-GV

50kg80-2268-PV

50kg

4”100mm *30mm Fixed 127mm 100 x 84mm 80 x 60mm 8mm 100-2268-NV

120kg100-2268-GV

70kg100-2268-PV

70kg

5” 125mm *39mm Fixed 155mm 100 x 84mm 80 x 60mm 8mm 125-2268-NV

150kg125-2268-GV

100kg125-2268-PV

100kg

*The thread shown is for nylon wheels. Rubber tyred wheels will be narrower as follows: 80mm = 23mm, 100mm = 23mm, 125mm = 26mm


OPTIONAL EXTRA


Foot operated wheel brake simultaneously brakes both the swivel head and wheel. Release is affected by the trip pedal. To order add suffix ‘ SWB ’ to the swivel castor reference.

Swivel Radius

The swivel radius is increased when brakes are fitted.





11Ross Handling

Medium Industrial Castors

4000 SeriesSize: 80mm, 100mm, 125mm & 160mm

Double Ball Bearing Swivel Castors.

The latest addition to the pressed steel range. The castors are suitable for use on trolleys, roll pallets, display racks and general purpose equipment. Available with rubber, polyurethane or nylon wheels.

Wheel Diam.

Tread Width

Castor Height

Sw'l Race Diam.

Bolt Diam.

Swivel Radius

Blue Rubber

Black Rubber

Grey Rubber

Polyure -thane White Nylon Anti Static

3” + 80mm

RN=36mmPV=22mmGV=22mmPN=38mmNY=30mm

108mm 65mm *12mm 70mm 80-4000-RNB100kg

80-4000-PV70kg

80-4000-GV70kg

80-4000-PNB100kg

**

80-4000-NY100kg -

4”100mm

RN=29mmPV=22mmGV=22mmPN=30mmNY=30mmAS=22mm

128mm 65mm *12mm 80mm 100-4000-RNB120kg

100-4000-PV80kg

100-4000-GV80kg

100-4000-PNB120kg

100-4000-NY120kg

100-4000-ASR70kg

5”125mm


157mm 73mm *12mm 100mm 125-4000-RNB150kg

125-4000-PV100kg

125-4000-GV100kg

125-4000-PNB150kg

125-4000-NY150kg

125-4000-ASR100kg

6” + 160mm


195mm - *12mm 135mm 160-4000-RNB200kg

160-4000-PVR135kg

160-4000-GVR135kg

160-4000-PNB200kg

160-4000-NYB200kg

160-4000-ASR135kg

*We also offer loose fitted reducing bushes to give a 10mm bolt diameter. **80mm wheel is grey on grey


OPTIONAL EXTRASRound Expanding Tubular Adaptor

Expanding adaptors available for round tubing in the following sizes: Overall height of castors increased by 3mm. To order add suffix detailed in table to castor references.

Square Expanding Tubular Adaptor

Expanding adaptors available for square tubing in the following sizes: Overall height of castors increased by 3mm. To order add suffix detailed in table to castor references.

Combined Swivel and Wheel Brake (all sizes)Simultaneously brakes both the swivel head and wheel. Release is affected by the trip pedal. To order add suffix ‘SWB’ to castor reference. Swivel Radius The swivel radius is increased when brakes are fitted. 80mm wheels: increased by 45mm 100mm wheels: increased by 40mm 125mm wheels: increased by 30mm 160mm wheels: increased by 32mm

Expander Range Ref.

18 - 19.5mm R-18

19.5 - 21.7mm R-20

21.7 - 24.5mm R-22

24.5 - 27mm R-25

27 - 29.5mm R-27

29.5 - 32mm R-30

Expander Range Ref.

20 - 22mm S-20

22 - 25mm S-22

25 - 28mm S-25

29 - 32mm S-29

36 - 38mm S-36


12 Ross Handling

Medium/Heavy Duty Castors

3360 Series (Swivel)Size: 80mm, 100mm, 125mm, 160mm & 200mm

Wheel Diam.

Tread width(mm)

Castor Type

Castor Height

Plate size

Bolt Hole

spacin'Swiv. Rad.

Blue Rubber

Grey Rubber

Black Rubber

Polyure -thane

PB WhiteNylon

RB WhiteNylon

3” + 80mm

RN=36GV=27PV=27PN=38NY=34

Swivel 108mm 105 x85mm

80 x60mm 75mm 80-3360-RNB

90kg80-3360-GVR

70kg80-3360-PVR

70kg*80-3360-PNB

150kg80-3360-NY

150kg -

Fixed 108mm 99 x85mm

80 x60mm - 80-3368-RNB

90kg80-3368-GVR

70kg80-3368-PVR

70kg*80-3368-PNB

150kg80-3368-NY

150kg -

4” 100mm



80 x60mm 85mm 100-3360-RNB

160kg100-3360-GVR

80kg100-3360-PVR

80kg100-3360-PNB

200kg - 100-3360-NYB 200kg


80 x60mm - 100-3368-RNB

160kg100-3368-GVR

80kg100-3368-PVR

80kg100-3368-PNB

200kg - 100-3368-NYB 200kg

5” 125mm



80 x60mm 105mm 125-3360-RNB

180kg125-3360-GVR

100kg125-3360-PVR

100kg125-3360-PNB

250kg - 125-3360-NYB 300kg


80 x60mm - 125-3368-RNB

180kg125-3368-GVR

100kg125-3368-PVR

100kg125-3368-PNB

250kg - 125-3368-NYB 300kg

6” + 160mm



105 x80mm 140mm 160-3360-RNB

300kg160-3360-GVR

150kg160-3360-PVR

150kg160-3360-PNB

300kg160-3360-NY

350kg160-3360-NYB

350kg


105x80mm - 160-3368-RNB

300kg160-3368-GVR

150kg160-3368-PVR

150kg160-3368-PNB

300kg160-3368-NY

350kg160-3368-NYB

350kg

8” 200mm



105x80mm 165mm 200-3360-RNB

400kg200-3360-GVR

200kg200-3360-PVR

200kg200-3360-PNB

400kg200-3360-NY

400kg200-3360-NYB

400kg


105 x80mm - 200-3368-RNB

400kg200-3368-GVR

200kg200-3368-PVR

200kg200-3368-PNB

400kg200-3368-NY

400kg200-3368-NYB

400kg

*The 80mm Polyurethane wheel is grey on grey.


3368 Series (Fixed)Size: 80mm, 100mm, 125mm, 160mm & 200mm

Double Ball Bearing Swivel & Fixed Castors. The castors are suitable for use on trolleys, roll pallets, display racks and general purpose equipment where good manoeuvrability and easy rolling is required together with high strength. Available with rubber, polyurethane or nylon wheels. 8mm bolt diameter for 3”, 4” and 5” castors. The 6” and 8” castors have 10mm bolt diameters

OPTIONAL EXTRAS


Foot operated wheel brake simultaneously brakes both the swivel head and wheel. Release is affected by the trip pedal. To order add suffix SWB’ to the swivel castor reference. Swivel Radius The swivel radius is increased when brakes are fitted. 80mm wheels: increased by 45mm 100mm wheels: increased by 40mm 125mm wheels: increased by 30mm 160mm wheels: increased by 30mm 200mm wheels: increased by 20mm

Directional Swivel Locks

Loose fitted (unassembled) directional swivel locks available on 6” and 8” castors.


13Ross Handling

Anti-Static & High Temp. Castors

Wheel Diam.

Tread Width

Castor Type

Castor Height Plate Size Bolt Hole

SpacingBolt

Diam. Swiv. Rad. Anti Static Rubber

High Temp. Phenolic

High Temp.Rubber

3” + 80mm TH=35mm

Swivel 108mm 105 x 85mm 80 x 60mm 8mm 75mm - 80-3360-TH100kg -

Fixed 108mm 99 x 85mm 80 x 60mm 8mm - - 80-3368-TH100kg -

4” 100mm

AS=22mmTH=35mmHT=34mm

Swivel 128mm 105 x 85mm 80 x 60mm 8mm 85mm 100-3360-ASR70kg

100-3360-TH125kg

100-3360-HT60kg

Fixed 128mm 101 x 85mm 80 x 60mm 8mm - 100-3368-ASR70kg

100-3368-TH125kg

100-3368-HT60kg

5” 125mm

AS=27mm TH=35mm


125-3360-TH150kg -


125-3368-TH150kg -

6” + 160mm

AS=24mmTH=40mm


160-3360-TH250kg -


160-3368-TH250kg -

8” 200mm

AS=30mmTH=50mm


200-3360-TH300kg -


200-3368-TH300kg -


Anti-Static Castors & High temperature CastorsA range of anti-static (electrically conductive) and high temperature castors. The anti-static wheels are pressed steel centres with black rubber tyres. The wheels are phenolic resin and high temperature rubber and have a range from -40°C to +280°C. Both ranges are available with and without brakes.

OPTIONAL EXTRACombined Swivel and Wheel Brake (all sizes)Foot operated wheel brake simultaneously brakes both the swivel head and wheel. Release is affected by the trip pedal. To order add suffix ‘SWB’ to the swivel castor reference.

Swivel Radius The swivel radius is increased when brakes are fitted. 80mm wheels: increased by 45mm 100mm wheels: increased by 40mm 125mm wheels: increased by 30mm 160mm wheels: increased by 30mm 200mm wheels: increased by 20mm

Pneumatic Tyred Swivel CastorsSwivel and Fixed Pneumatic tyred castors. Availabe in 8” and 10” diameters. Ideal for cushioning sensitive loads. The 10” wheel is used on cricket wicket covers as the wide tread prevents damage to the playing surface. Black tyres on grey metal centres.

Wheel Diam.

Tread Width

Castor Type

Castor Height Plate Size Bolt Hole

SpacingBolt

Diam.Swiv. Rad. 8" Ref. 10" Ref.

8” 200mm48mm

Swivel 240mm 137 x 105mm 105 x 80mm 10mm 165mm 200-3360-PWR75kg -

8” 200mm Fixed 240mm 140 x 115mm 105 x 80mm 10mm - 200-3368-PWR75kg -

10” 260mm85mm

Swivel 302mm 200 x 160mm 105 x 115mm 12mm 215mm - 260-3360-PWR200kg

10” 260mm Fixed 302mm 200 x 160mm 105 x 115mm 12mm - - 260-3368-PWR200kg



14 Ross Handling

Stainless Steel Castors

SS Series Stainless Steel Swivel Castors

Size: 80mm, 100mm, 125mm, 160mm & 200mm

Wheel Diam.

Tread width(mm)

Castor Type

Castor Height

Plate size

(mm)

Bolt Hole spacing

(mm)Bolt

Diam.Swiv. Rad.

Grey Rubber

Polyur-ethane

WhiteNylon

High Temp Termotex

High Temp Rubber

3” + 80mm

GV=27PN=38NY=34TH=35

Swivel 108mm 105 x 85 80 x 60 8mm 75mm SS-80-GVR 70kg

*SS-80-PNB 100kg

SS-80-NY 100kg

SS-80-TH 100kg -

Fixed 108mm 99 x 85 80 x 60 8mm - SF-80-GVR 70kg

*SF-80-PNB 100kg

SF-80-NY 100kg

SF-80-TH 100kg -

4” 100mm

GV=23PN=30NY=34TH=35HT=34


SS-100-PNB 150kg

SS-100-NY 150kg

SS-100-TH 125kg

SS-100-HT 60kg


SF-100-PNB 150kg

SF-100-NY 150kg

SF-100-TH 125kg

SF-100-HT 60kg

5” 125mm

GV=23PN=30NY=38TH=35


SS-125-PNB 300kg

SS-125-NY 300kg

SS-125-TH 150kg -


SF-125-PNB 300kg

SF-125-NY 300kg

SF-125-TH 150kg -

6” + 160mm

PN=40NY=40TH=40

Swivel 196mm 140 x 110 105 x 80/75 10mm 140mm - SS-160-PNB 350kg

SS-160-NY 350kg

SS-160-TH 250kg -

Fixed 196mm 140 x 110 105 x 80/75 10mm - - SF-160-PNB 350kg

SF-160-NY 350kg

SF-160-TH 250kg -

8” 200mm

PN=50NY=46TH=40

Swivel 236mm 140 x 110 105 x 80/75 10mm 165mm - SS-200-PNB 400kg

SS-200-NY 400kg

SS-200-TH 300kg -

Fixed 236mm 140 x 110 105 x 80/75 10mm - - SF-200-PNB 400kg

SF-200-NY 400kg

SF-200-TH 300kg -

*The 80mm Polyurethane wheel is grey on grey.


SF Series Stainless Steel Fixed Castors

Size: 80mm, 100mm, 125mm, 160mm & 200mm

STAINLESS STEEL SWIVEL & FIXED CASTORS have been introduced to cater for the increased demand in the food processing, institutional and hospital equipment industries. Bolt hole fitting also available on 80mm, 100mm, 125mm and 160mm wheel diameters.

OPTIONAL EXTRACombined Swivel and Wheel Brake (all sizes)

Foot operated wheel brake simultaneously brakes both the swivel head and wheel. Release is affected by the trip pedal. To order add suffix ‘SWB’ to the swivel castor reference. Swivel Radius The swivel radius is increased when brakes are fitted. 80mm wheels: increased by 45mm 100mm wheels: increased by 40mm 125mm wheels: increased by 30mm 160mm wheels: increased by 30mm 200mm wheels: increased by 30mm Bolt hole fitting M12 bolt hole fitting also available in 80mm, 100mm, 125mm and 160mm wheel diameters.


Size: 80mm, 100mm, 125mm, 160mm & 200mm

15Ross Handling

Extra Heavy Duty Castors

5000 Series (Swivel)Size: 160mm & 200mm

Wheel Diam.

Tread width(mm)

Castor Type

Castor Height

Plate size

(mm)

Bolt Hole spacin' (mm)

Bolt Diam.

Swiv. Rad. Rubber Polyur-

ethaneWhiteNylon Cast Iron

5” 125mm

HRT=50SUB=50NYB=50

Swivel 164mm 140 x 110 105 x 80/75 10mm 118mm 125-5000- HRT 300kg

125-5000-SUB 550kg

125-5000-NYB 700kg -

Fixed 164mm 140 x 110 105 x 80/75 10mm - 125-5050- HRT 300kg

125-5050-SUB 550kg

125-5050-NYB 700kg -

6” + 160mm

HRT=50SUB=50

NYB=50CIB=45

Swivel *200mm 140 x 110 105 x 80/75 10mm 135mm 160-5000- HRT 400kg

160-5000-SUB 700kg

160-5000-NYB 700kg

150-5000-CIB 700kg

Fixed *200mm 140 x 110 105 x 80/75 10mm - 160-5050- HRT 400kg

160-5050-SUB 700kg

160-5050-NYB 700kg

150-5050-CIB 700kg

8” 200mm

HRT=50SUB=50

NYB=50CIB=45

Swivel 240mm 140x 110 105 x 80/75 10mm 155mm 200-5000- HRT 500kg

200-5000-SUB 800kg

200-5000-NYB 800kg

200-5000-CIB 800kg

Fixed 240mm 140 x 110 105 x 80/75 10mm - 200-5050- HRT 500kg

200-5050-SUB 800kg

200-5050-NYB 800kg

200-5050-CIB 800kg

*When the 6” cast iron wheels are used, the castor height is reduced by 10mm.


5050 Series (Fixed)Size: 160mm & 200mm Very heavy duty swivel and fixed castors. Suitable for a wide range of industrial applications. Available with rubber, polyurethane, nylon and cast iron wheels.

OPTIONAL EXTRAS

Combined Swivel and Wheel Brake

Foot operated wheel brake simultaneously brakes both the swivel head and wheel. Release is affected by the trip pedal. To order add suffix ‘SWB’ to the swivel castor reference. Swivel Radius The swivel radius is increased when brakes are fitted. 125mm wheels: increased by 30mm 160mm wheels: increased by 15mm The 6” cast iron wheels are not available with brakes.

TLCH Truck Locks

Top plate fittingThe TLCH truck lock is designed to bolt to the underside of the truck and should be mounted with its top face 200mm above the ground surface.

Plate size Bolt Hole Spacing

Bolt Diam.

Overall height - free position

Overall height - pad extended

152 x 114mm 127 x 63.5mm 12mm 163.5mm 208mm


16 Ross Handling

Fabricated Castors

6000 Series (Swivel)Size: 100mm, 125mm, 160mm, 200mm & 250mm

Wheel Diam.

Tread width(mm)

Castor Type

Castor Height Plate size

Bolt Hole spacin' (mm)

Bolt Diam. Swiv. Rad. Cast Iron Polyurethane

4”100mm

CI=45SUB=50

Swivel 145mm 135 x 110mm 105 x 80/75mm 10mm 92mm TSH-100-CI1H320kg

100-6000-SUB450kg

Fixed 145mm 135 x 110mm 105 x 80/75mm 10mm - TFH-100-CI1H320kg

100-6050-SUB450kg

5”125mm

CI=45SUB=50

Swivel 170mm 135 x 110mm 105 x 80/75mm 10mm 110mm TSH-125-CI1H630kg

125-6000-SUB550kg

Fixed 170mm 135 x 110mm 105 x 80/75mm 10mm - TFH-125-CI1H630kg

125-6050-SUB550kg

6”160mm 60mm

Swivel 205mm 135 x 110mm 105 x 80/75mm 11mm 137mm - 160-6000-SUB860kg

Fixed 205mm 135 x 110mm 105 x 80/75mm 11mm - - 160-6050-SUB860kg

8”200mm 60mm

Swivel 245mm 135 x 110mm 105 x 80/75mm 11mm 166mm - 200-6000-SUB1200kg

Fixed 245mm 135 x 110mm 105 x 80/75mm 11mm - - 200-6050-SUB1200kg

10”250mm 80mm

Swivel 305mm 200 x 160mm 160 x 120mm 14mm 199mm - 250-6000-SUB1700kg

Fixed 305mm 200 x 160mm 160 x 120mm 14mm - - 250-6050-SUB170kg


6050 Series (Fixed)Size: 100mm, 125mm, 160mm, 200mm & 250mm Extremely heavy duty fabricated swivel & fixed castors. Precision bearings in swivel head and wheel on 160mm, 200mm and 250mm diameters. Available with cast iron or polyurethane wheels.

OPTIONAL EXTRA

Combined Swivel and Wheel Brake

Available on 125mm, 160mm, 200mm and 250mm sizes.Foot operated brake simultaneously brakes both wheel and swivel head. To order add suffix ‘SWB’ to castor reference. Swivel Radius The swivel radius is increased when brakes are fitted. 125mm wheels: increased by 40mm 160mm wheels: increased by 20mm 200mm wheels: increased by 20mm 250mm wheels: increased by 20mm


Size: 100mm, 125mm, 160mm, 200mm & 250mm

Size: 100mm, 125mm, 160mm, 200mm & 250mm Extremely heavy duty fabricated swivel & fixed castors. Precision bearings in swivel head and wheel on 160mm, 200mm and 250mm diameters. Available with cast iron or polyurethane wheels.

17Ross Handling

Jacking Castors

Wheel Diam.

Swiv.Rad.

Tread Width

Load Capacity Wheel Type Bearing

Type Castor Ref

4”100 mm 91 mm

35mm29mm35mm38mm

135kg225kg225kg225kg

Rubber TyredPolyurethane

NylonCast Iron

Plain Plain Plain Plain

JA4-100-RU04JA4-100-PT04JA4-100-NY04JA4-100-CI04

5”125 mm 105 mm

38mm32mm35mm38mm

160kg225kg225kg225kg

Rubber TyredPolyurethane

NylonCast Iron

Plain Plain Plain Plain

JA5-125-RU04JA5-125-PT04JA5-125-NY04JA5-125-CI04

Medium Duty Jacking Castors with 76mm liftAvailable with 4” and 5” wheels in nylon, rubber, cast iron and polyurethane.

Optional extras: Wheel and swivel lock. The foot pedal clamps a spring across the wheel and swivel and effectively locks them both. To order add suffix ‘L’ to reference (swivel radius increased by 40mm).

6”150 45mm 556mm 291mm 135mm Roller JA-6RTB

400/370kgJA-6SUB

725/630kgJA-6CIB

1020/680kg

8”200

51mmCI=45

mm607mm 342mm 160mm Roller JA-8RTB

585/535kgJA-8SUB

1045/725kgJA-8CIB

1090/725kg

Heavy Duty Jacking Castors with 76mm lift

Wheel Diam.

Tread Width

Swivel Radius

Wheel Bearing

Type Rubber Polyurethane Cast Iron


Footmaster CastorFootmaster multifunctional castors allow users to move and position large equipment single handedly. Light, Medium and heavy duty versions available.

Load capacity from 50kg to 1500kg.

Ask our sales office for details.

C D

Available with 6” and 8” rubber tyred, polyurethane and cast iron wheels.


18 Ross Handling

Gate & Low Level Castors

Gate CastorsHeavy duty 4” fixed castor is designed to help support a gate where either end of a gate needs support and/or there is some variation in level of ground (3” maximum compression of spring with 70kg force). Consideration therefore needs to be given as to the location of this castor on the gate. Fixing via 2 x 10mm holes. Fitted with rubber tyred, roller bearing wheels.

Heavy Duty Light Duty The light duty swivel version is 280mm overall height with a 100mm fixing plate and 60mm centres. Fitted with 4” rubber tyred wheels

having a load capacity of 60kg.

Scene Shifter - Industrial SkatesRange of scene shifters and industrial skates for low level movement. Available from 35mm to 125mm wheel diameters. Ideal for moving scenery. Load capacity 300kg to 500kg.

Appliance RollersEasily move refrigerators, and other heavy domestic appliances. Not recommended for cushioned vinyl floors and hardwood floors. 420mm x 80mm extendable to 640mm. Overall height: 38mm Load capacity: 200kg (Per pair)

Wheel Diam.

Overall Height

Swivel Radius

Tread Width

Load Capacity Wheel Type Castor Ref

2”50mm 64mm 50mm 14mm

160kg270kg160kg

Twin PolyurethaneTwiin SteelTwin Nylon

2SL 050 PTOL2SL 050 STOL2SL 050 NYOL

50mm Twin Low Level CastorsTwin wheel castors are only 64mm overall height with twin 50mm wheels. On a smooth hard floor these castors are able to carry up to 270kg per castor. Suitable for use on concert grand piano-fortes, fire proof filing cabinets, safes and other such heavy equipment. Available with twin steel, polyurethane or nylon wheels.

100

85

40

375

41

885 159

8

Type A Elevation


19Ross Handling

Special Application Castors

Glass Handling Scaffolding Stair Climber

Twin Wheeled Puncture Proof Shock Absorbing


20 Ross Handling

Pneumatic & Trolley Wheels

Wheel Diameter

Tread Width

Load Cap.

Hub Length

Hub Bore

Reference Plain

6" (150mm) 39mm 30kg 38mm 1/2" PD-6

7" (180mm) 45mm 50kg 38mm 1/2" PD-7

8" (200mm) 45mm 50kg 38mm 1/2" PD-8

“Light duty wheels - tough moulded polypropylene centres fitted with ribbed tyres. PD range is specially designed for grass cutting machines and other light horticultural applications.”

PD Series

Wheel Diameter

Tread Width

Load Cap.

Hub Length

Hub Bore

Reference Plain

80mm 21mm 30kg 37mm 8mm A-80100mm 24mm 35kg 35mm 10mm A-100125mm 31mm 50kg 44mm 15mm A-125160mm 40mm 100kg 44mm 20mm AB-160200mm 33mm 130kg 44mm 20mm AB-200L

“Traditional light industrial range of wheels. The centres are black polypropylene with black rubber tyres.”

ABC Series

Wheel Diameter

Tread Width

Load Cap.

Hub Length

Hub Bore

Reference Plain

6" (160mm) 30mm 150kg 51mm 3/4" EPR-6 (3/4")

6" (160mm) 30mm 150kg 51mm 1" EPR-6 (1")

8" (200mm) 30mm 200kg 51mm 3/4" EPR-8 (3/4")

8" (200mm) 30mm 200kg 51mm 1" EPR-8 (1")

10" (250mm) 60mm 275kg 51mm 1" EPR-10 (1")

11" (270mm) 60mm 150kg 59mm 1" EPR-11 (1")

“Light industrial range of cushion tyred wheels having red centres with black tyres. Ideally suited for sack trucks and trolleys etc. Alternative diameters and hub bores available.” We can produce bushes for the hub bore, which will reduce the bore size to: 1/2” or 20mm. The hub lengths will then be increased by 8mm and the load capacity reduced by 50%.

EPR Series

Wheel Diameter

Tread Width

Load Cap.

Hub Length

Hub Bore

Reference Plain

10 5/8" (270mm) 98mm 125kg 56mm 1" GB-270 (1")

GB Series (Sandhopper)“Extra wide tread wheels.Suitable for barrows, launching trolleys and any outdoor application.” We can produce bushes for the hub bore, which will reduce the bore size to: 1/2” or 20mm. The hub lengths will then be increased by 8mm and the load capacity reduced by 50%.

Wheel Diameter

Tread Width

Load Cap.

Hub Length

Hub Bore Wheel Reference

8 3/4" (220mm) 65mm 100kg 76mm 1"PB PW-250-4-25.4-76

10 1/4" (260mm) 85mm 120kg 76mm 1"PB PW-300-4-25.4-76

10 1/4" (260mm) 85mm 120kg 76mm 1"RB PWR-300-4-25.4-76

16" (400mm) 100mm 150kg 68mm 1"PB PW-400-8-25.4-68

16" (400mm) 100mm 150kg 75mm 1"RB PWR-400-8-25.4-75

PW Series (Plastic Centres) “Pneumatic tyred wheels suitable for low speed applications. Red centres with black tyres 4 ply rating.” We can produce bushes for the hub bore, which will reduce the bore size to: 1/2” or 20mm. The hub lengths will then be increased by 8mm and the load capacity reduced by 50%.“Puncture proof” tyres available to special order with and

without roller bearing centres.

Wheel Diameter

Tread Width

Load Cap.

Hub Length

Hub Bore

Reference Plain

8" (200mm) 48mm 75kg 60mm 20mm WAT-8RBM20

10 1/4" (260mm) 85mm 200kg 76mm 20mm PWMR-300-4-20-76

10 1/4" (260mm) 85mm 200kg 76mm 1"RB PWMR-300-4-25.4-76

*16" (400mm) 100mm 250kg 76mm 1"RB PWMR-400-8-25.4-76

PW Series (Metal Centres)

* The 16” diameter wheel has a red metal centre and is also available in black to special order.

“Pneumatic tyred wheels suitable for low speed applications. Grey Metal centres with black tyres 4 ply rating.”


Pneumatic & Trolley Wheels

21Ross Handling

Plastic & Nylon Wheels

Wheel Diameter Tread Width Load Cap. Hub Length Hub Bore Reference

Plain

2" 50mm 22mm 70kg 28mm 8mm 50-PL

3" 75mm 22mm 80kg 29mm 8mm 75-PL

4" 100mm 22mm 90kg 30mm 8mm 100-PL

PL Series Light Duty Plastic Wheels Finish: Black


Plain

2" 50mm 22mm 60kg 27.5mm 8mm 50-RP

3" 75mm 23mm 70kg 28mm 8mm 75-RP

4" 100mm 26mm 80kg 30mm 8mm 100-RP

RP Series Light Duty Grey Rubber Tyred Wheels Finish: Grey/Grey


Plain

3" + 80mm 30mm 100kg 39mm 12mm 80-NV

4" 100mm 30mm 130kg 39mm 12mm 100-NV

5" 125mm 38mm 200kg 44mm 15mm 125-NV

NV Series Medium Duty Nylon Wheels Finish: White


Plain

3" + 80mm 22mm 70kg 39mm 12mm 80-PV

4" 100mm 22mm 80kg 39mm 12mm 100-PV

5" 125mm 27mm 100kg 44mm 15mm 125-PV

PV Series Medium Duty Rubber Tyred Wheels Finish: Black/Black


Plain

3" + 80mm 22mm 70kg 39mm 12mm 80-GV

4" 100mm 22mm 80kg 39mm 12mm 100-GV

5" 125mm 27mm 100kg 44mm 15mm 125-GV

GV Series Medium Duty (non-marking) Rubber Tyred Wheels Finish: Grey/Black

Wheel Diameter Tread Width Load Cap. Hub Length Hub Bore Wheel

Reference

6" 150mm 30mm 60kg 36mm 8mm RJP-150

8" 200mm 30mm 70kg 53mm 8mm RJP-200

24" 610mm 28mm 50kg 56mm 12mm RQP-610

RJ SeriesMedium Duty (non-marking) Rubber Tyred Wheelchair Wheels fitted with ball journal bearings. The 24” is also available with synthetic or polyurethane tyres.


22 Ross Handling

Rubber & High Temp. Wheels

Wheel Diam.

Tread Width

Load Cap.

Hub Length Hub Bore Ref. Plain Ref. Roller

3" + 80mm 27mm 70kg 45mm 12-20mm 80-PVP-20mm 80-PVR-12mm

4" 100mm 23mm 80kg 45mm 12-20mm 100-PVP-20mm 100-PVR-12mm


6" + 160mm 25mm 150kg 58mm 15-23mm 160-PVP-23mm 160-PVR-15mm


PVR Series Medium/Heavy Duty Rubber Tyred Wheels Finish: Black/Black, Red centres on 6” and 8”

Wheel Diam.

Tread Width

Load Cap.


3" + 80mm 27mm 70kg 45mm 12-20mm 80-GVP-20mm 80-GVR-12mm

4" 100mm 23mm 80kg 45mm 12-20mm 100-GVP-20mm 100-GVR-12mm


6" + 160mm 25mm 150kg 58mm 15-23mm 160-GVP-23mm 160-GVR-15mm


GVR Series Medium/Heavy Duty (non-marking) Rubber Tyred wheels Finish: Grey/Black

Wheel Diam.

Tread Width

Load Cap.


3" + 80mm 36mm 150kg 40mm 12mm - 80-RNB

4" 100mm 29mm 200kg 44mm 12mm - 100 RNB

5" 125mm 34mm 250kg 44mm 12mm - 125 RNB

6" + 160mm 40mm 350kg 60mm 20mm - 160 RNB

8" 200mm 40mm 400kg 60mm 20mm - *200 RNB

RN Series Heavy Duty Blue Elastic Rubber Tyred Wheels Finish: Blue/Black

Wheel Diam. Tread Width Load Cap. Hub Length Hub Bore Ref. Plain

3" + 80mm 35mm 100kg 40mm 12mm 80-TH

4" 100mm 35mm 125kg 40mm 12mm 100-TH

5" 125mm 35mm 150kg 40mm 12mm 125-TH

6" + 160mm 40mm 250kg 58mm 20mm 160-TH

8" 200mm 50mm 300kg 58mm 20mm 200-TH

TH Series Heavy Duty phenolic resin, high temperature wheels. Temp range from: -40°C + 280°C Finish: Black

Wheel Diam. Tread Width Load Cap. Hub Length Hub Bore BallBearing

4" 100mm 34mm 60kg 38mm 12mm 100-HT

HT Series Heat Resisting Rubber Wheel. Fitted with precision ball bearings. Temp range from: -30°C + 260°C Finish: Red/Silver

The 8” diameter wheels are fitted with ball journals


Rubber & High Temp. Wheels

23Ross Handling

Polyurethane Wheels

Wheel Diam.

Tread Width

Load Cap.


3" + 80mm 34mm 150kg 44mm 12mm 80-NY-12mm 80-NYB-12mm

4" 100mm 34mm 200kg 44mm 12-20mm 100-NY-20mm 100-NYB-12mm


6" + 160mm 40mm 350kg 58mm 20mm 160-NY-20mm 160-NYB-20mm


8" 200mm 38mm 450kg 60mm 25.4mm (1") WNY-8L -

NY Series Heavy Duty Nylon Wheels Finish: White

Wheel Diameter Tread Width Load Cap. Hub Length Hub Bore Ref. Ball

Journal

5" 125mm 50mm 700kg 60mm 20mm 125-HNYB

6" + 160mm 50mm 700kg 60mm 20mm 160-HNYB

8" 200mm 50mm 800kg 60mm 20mm 200-HNYB

HNY Series Extra Heavy Duty Nylon Wheels Finish: White

Wheel Diam.

Tread Width

Load Cap.


3" + 80mm 38mm 150kg 44mm 12mm-20mm 80-PN-20mm 80-PNB-12mm

4" 100mm 30mm 150kg 44mm 12mm-20mm 100-PN-20mm 100-PNB-12mm

5" 125mm 30mm 200kg 44mm 12mm-20mm 125-PN-20mm 125-PNB-12mm

6" + 160mm 40mm 400kg 59mm 20mm - 160-PNB-20mm

8" 200mm 50mm 500kg 59mm 20mm - 200-PNB-20mm

PN SeriesHeavy Duty Polyurethane Tyred Wheels on nylon centres Finish: Maroon/White (3” Grey on Grey)


Journal

4" 100mm 50mm 450kg 60mm 20mm 100-HSUB

5" 125mm 50mm 550kg 60mm 20mm 125-HSUB

6" + 160mm 50mm 770kg 60mm 20mm 160-HSUB-50

6" + 160mm 60mm 850kg 60mm 20mm 160-HSUB-60

8" 200mm 50mm 1000kg 60mm 20mm 200-HSUB

8" 200mm 60mm 1200kg 60mm 20mm 200-HSUB-60

10" 250mm 80mm 1800kg 90mm 25mm 250-HSUB-80

HSU SeriesExtra Heavy Duty Polyurethane Tyred Wheels on cast iron centres Finish: Yellow/Black


Journal

5" 125mm 50mm 300kg 60mm 20mm 125-HRT

6" + 160mm 50mm 400kg 60mm 20mm 160-HRT

8" 200mm 50mm 500kg 60mm 20mm 200-HRT

HRT Series Extra Heavy Duty Rubber Tyred Wheels on aluminium centres. Finish: Black/Silver


24 Ross Handling

Anti-Static Wheels & Pallet Rollers

Wheel Diam.

Tread Width

Load Cap.


*3" + 75mm 25mm 75kg 26mm 8mm *75-ASPR -4" 100mm 22mm 70kg 45mm 12mm - 100-ASR5" 125mm 27mm 100kg 45mm 12mm - 125-ASR

6" + 160mm 24mm 135kg 58mm 20mm - 160-ASR8" 200mm 30mm 205kg 58mm 20mm - 200-ASR

ASR Series Heavy Duty Anti-static (Electrically conductive) Rubber Wheels on Metal Centres. Finish: Black/Zinc

* The 3” is plastic centred with a plain bore.

Type of Roller Roller Diam. Roller Width Hub Bore Load Capacity

Ref.Ball Journal

Polyurethane82mm 100mm *20mm 600kg 82-PR200mm 50mm 20mm 500kg 200-PR

PR Series Polyurethane Pallet Rollers on nylon centres Finish: Brown/White

* 25mm hub bores also available. Extra heavy duty rollers on cast iron centres available to special order

Type of Roller Roller Diam. Roller Width Hub Bore Load Capacity

Ref.Ball Journal

Nylon

82mm 60mm *20mm 700kg 60-NP82mm 75mm *20mm 800kg 75-NP82mm 100mm *20mm 1500kg 82-NP82mm 50mm *20mm 1200kg 200-NP

NP Series Nylon Pallet Rollers Finish: White

* 25mm hub bores also available.

Wheel Diam.

Tread Width

Load Cap.


6" 150mm 35mm 150kg 51mm 25.4mm NSS-6(Z) NSS-6R(Z)





NSS Series Cushioned Tyred Wheels with Pressed Steel Centres Finish: Black/Zinc

Wheel Diam. Tread Width Load Cap. Hub Length Hub Bore Ref.Plain

13" 330mm 70mm 250kg 66mm 25.4mm PBW-330RIB14" 350mm 52mm 300kg 66mm 25.4mm PBW-350RIB16" 400mm 90mm 350kg 66mm 25.4mm PBW-400RIB

PB Series Solid Rubber Tyred Wheels with Plastic Centres Finish: Black/Red

Wheel Diam.

Tread Width

Load Cap.


13" 3330mm 70mm 300kg 66mm 25.4mm BWG-330RIB -

*14" 350mm 75mm 400kg 66mm 25.4mm BWG-350RIB BWR-350RIB

*16" 400mm 100mm 500kg 66mm 25.4mm BWG-400RIB BWR-400RIB

18" 450mm 115mm 750kg 100mm 1 1/4" - BWR-450RIB

BW Series Heavy Duty Rubber Wheels on Metal Centres. Alternative red centres to special order Finish: Black/Black


Anti-Static Wheels & Pallet Rollers

25Ross Handling

Cast Iron, Grooved & Flanged Rail Wheels

Wheel Diam.

Tread Width

Load Cap.


3" 75mm 32mm 170kg 39mm 12mm 75-CI -

4" 100mm 38mm 400kg 48mm 15mm 100-CI 100-CIB




10" 250mm 51mm 1360kg 60mm 25mm - 250-CIB

CI Series Heavy Duty Cast Iron Wheels Finish: Black

Wheel Diam. Tread Width Load Cap. Hub Length Hub Bore Ref. Taper Roller

6" 150mm 70mm 3000kg 92mm 31.8mm WHC-306 TM10” 250mm 76mm 3270kg 92mm 31.8mm WHC-310 TM10" 250mm 102mm 5500kg 148mm 34.9mm WHC-510 TM

HC Series Extra Heavy Duty Cast Iron Wheels fitted with Taper Roller Bearings Finish: Black

Wheel Diam. Tread Width Hub Length Hub Bore Load Capacity

Ref.Roller

3" 75mm 37mm 60mm 20mm 225kg 075-CVIB4" 100mm 46mm 60mm 20mm 250kg 100-CVIH5" 125mm 38mm 60mm 20mm 265kg 125-CVIH6" 150mm 45mm 60mm 25mm 910kg 150-CVIH*6" 150mm 48mm 60mm 20mm 1020kg WGR-6RBM208" 200mm 45mm 60mm 25mm 910kg 200-CVIH

GR SeriesV-Grooved Cast Iron Wheels Finish: Silver Additional sizes of Grooved Wheels are also available to special order.

*Black finish on WGR-6RBM20.

Wheel Diameter Tread Width Load Cap. Hub Length Hub Bore Ref. Roller &

Ball Bearing

4" 100mm 33mm 250kg 60mm 20mm 100-CFIH

5" 125mm 50mm 900kg 50mm 20mm 125-CFIH

6" 150mm 35mm 910kg 57mm 20mm 150-CF2H

8" 200mm 58mm 1500kg 58mm 25mm 200-CF2H

CF SeriesCast Iron Single Flanged Rail Wheels Finish: Silver, Black also available on some versions. Additional sizes of single flanged wheels are also available to special order.


& Taper

2" 50mm 14mm 135kg 17mm 12mm 050-STOL-PLAIN

6" 150mm 50mm 1130kg 48.3mm 20mm 150-ST2H

8” 200mm55mm 2500kg 53mm 31.7mm 200-STTP

85mm 5080kg 81mm 50mm 200-ST3T

10" 250mm 100mm 5450kg 108mm 30mm 250-STT

12" 300mm 100mm 5500kg 108mm 30mm 300-STT

ST Series Extra Heavy Duty Steel Wheels Finish: Black (Silver on some sizes). Solid steel wheels fitted with ball and taper roller bearings.


26 Ross Handling

Special Application Wheels

Steel Flat Tread Heavy Duty Antistatic

Twin Wheels

Keyway Polyurethane

Double FlangedFlanged Beam


Wheelie Bin Wheels

Wheelie Bin Wheels

27Ross Handling

Terms & Conditions of Sale

1. DEFINITIONSThe following definitions shall apply to the following phrases when used in these conditions:

• ‘’The Company’’ means Ross Handling Ltd

• ‘’ The Goods ‘’ means any standard goods supplied by the company to the purchaser under contract subject to these conditions

• ‘’ The Purchaser’’ means the person(s), firm or company (including the consumer) –whose order for the Goods is accepted by the Company.

• ‘’The Consumer’’ means an individual who enters into a contract for purpose which is outside its trade, business or profession. The consumers will be governed by Distance Selling Regulations ( DSR’s )

The purchaser, to whom the goods are to be supplied, are subject to these conditions:

Our Terms and Conditions apply to all contracts for the sale of Goods by the Company, any deviations are not accepted unless we expressly agreed to them in writing. They are Governed by English Law. The placing of the order will be deemed to constitute acceptance of these terms. These conditions will apply to all future contracts, written or verbal for the supply of goods.

2. QUOTES AND ORDERSQuotes are valid for 30 days from the date of the quote. Quotations are subject to alteration and withdrawal without notice by the Company. Whilst we will make every effort to maintain prices quoted, often unexpected rises in material costs or changes in quantities ordered by the purchaser my affect prices quoted. Orders or acceptance of a quotation, are accepted by the Company, with either a written purchase order , fax or e mail and / or verbal confirmation of the order. Minimum order values are £10 ( exc. Carriage and VAT )Acceptance of the order by the Company is deemed as the Purchaser or Consumer accepting the Terms and Conditions of Sale.

3. PRICEThe price quoted upon application to the Company is exclusive of VAT. All prices quoted are subject to carriage unless the Goods are collected by the Purchaser, or Purchasers courier. The Company reserves the right to alter any of its prices at any time and Goods despatched after the date of such alteration shall be invoiced at the rate then prevailing. Where quantities ordered vary from those quoted for, the Company reserves the right to requote.

4. DESCRIPTIONS, SAMPLES AND LITERATUREAll descriptions, drawings, sizes, specifications issued by the Company or published in Company literature must not be relied upon by the Buyer, as they are issued to give an approximate idea.

5. PAYMENTWhere no credit account has been opened, the Purchaser is required to pay in advance for the Goods. In order to set up a credit account the Purchaser would need to apply to the Company directly for more information.

Where a credit account has been opened the invoice for the Goods will become due 30 days from the date of the invoice. In the event that the purchaser fails to make payment by that date the Company may without prejudice to any other rights which it may have:

a) Suspend all further deliveries to the Purchaser under the contract in question or any other contract.

b) Require payment in advance for any future deliveries

c) Require payment of interest on the amount due at a compound annual rate of 3% per annum above the Bank of England Base Rate for the time prevailing from the date when payment becomes due to the actual date of payment

d) Withdraw the credit account at any time and make credit reference searches in relation to the buyer.

e) Reduce and or remove the credit limit and review on a quarterly basis.

5. DELIVERYUnless otherwise agreed the Goods will be sent to the Purchaser by courier service and unless contrary instructions are received, the Goods will be delivered to the Purchasers place of business and or Invoice address. Therefore transport of the Goods will be subject to the couriers conditions, which are available upon request.

Any period of time or dates quoted for delivery of the Goods are approximate and will not be the essence of the contract. The Company will not be liable for any claim for any shortages, pilferage or damage to Goods unless the Company is advised within 3 working days of delivery. This is in addition to and does not affect a Consumers rights in relation to defective goods given to consumers by law. Should the Goods be returned due to incorrect ordering on the part of the Purchaser, the Company reserves the right to charge 20% restocking charge and will not refund carriage. Should the Purchaser fail to take delivery, or fail to give the Company adequate delivery instructions in advance then the Company will have deemed to have delivered the Goods, and carriage will not be refunded. The Company will not be liable for any claim for non delivery unless advised by the Purchaser within 7 days of the relevant Invoice Date. Any delay in delivery does not entitle the Purchaser to terminate the contract, unless and until the Purchaser has given a specific amount days written notice to the Company requiring delivery to be made and the Company has not fulfilled the delivery.

6. TITLE AND RISKThe Goods remain the sole and absolute property of the Company until the Purchaser has paid for the Goods in full. The Goods are insured by and at the risk of the Company until they are off loaded at the Purchases delivery address, place of business or otherwise specified address. It is then the purchaser’s responsibility to insure the Goods. Purchasers right to possession of the Goods terminates if the Purchaser has failed to pay for the Goods in full or has a Bankruptcy order made against them.

7. WARANTEES AND CONDITIONSThe warrantees and conditions contained in the Sale of Goods Act 1979 shall apply to this contract and all other warrantees and conditions wether express or implied are hereby excluded provided that:

a) The Company may very designs and specifications or modift the Goods supplied without prior notice, provided such modifications do not adversely effect the performance of the Goods.

b)The Company shall be under no liability to the Purchaser or any third party for any consequential or economic loss or expenses.

c) The Company shall be under no liability for breach of any of the said conditions and warrantees arising from defects in the Goods unless a claim has been notified within 6 months form the date the Goods were delivered.

d) The Company may at its option either repair or replace any Goods which may be found to be defective.

e) The Company’s liability for any loss or damage caused by any defect in the Goods shall be limited to the amount paid or payable by the Purchaser to the Company for the Goods.

f) Third Parties , unless the right of enforcement is expressly provided, it is not intended that a third party should have the right to any part of this contract pursuant to the Contract.( Rights of Third Parties 1999)

8. DAMAGES AND SHORTAGESThe Company will credit or replace any products that we agree are defective or damaged, free of charge and carriage free. Providing such Goods are not defective due to misuse and the Purchaser informs the Company within 3 working days of receipt. The Company does not accept liability for expenses incurred by Purchaser on such defective products or for any direct or consequential damage arising from such a defect. Misuse, can refer to using the Goods for a purpose other than specified and intended. For example using higher loads than specified in the Company literature or web site. Using on uneven floors, in extremes of temperatures, using around hazardous chemicals, rough use, impacts, foreign matter intrusions, excessive speeds or any modifications made. Shortages must also be advised to the Company within 3 working days otherwise we cannot accept claims. The Company will not be liable for any failure or delay or for the consequential loss of any failure or delay in performance of the contract if it is due to any event or force majeure, beyond the reasonable control of the company.

9. TERMINATIONThe Company does not accept termination of special orders (which are defined as non standard stock items). These goods are non refundable. The Company reserves the right to terminate the contract to supply Goods should the Purchaser enter into insolvency, bankruptcy, or any arrangements with its creditors, or breach the contract.

10. LIMITATION OF LIABILITYIf the Goods are or any part thereof are defective solely as a result of faulty materials or workmanship of the Company, the Company’s liability shall be limited, at its discretion, either by replacing such goods or the defective part, or by giving the Purchaser credit for the value. No such liability shall arise unless notification of any defect is received by the Company within 3working days

11. INDEMNITYThe Purchaser agrees to indemnify the Company against liabilities incurred by the Company ( including damages, losses and expenses) awarded against or incurred by the Company by reason of any proceedings, claims or demand which may be made or brought against the Company: either

a) Alleging infringement of any patent copyright or other rights of third parties by reason of anything done by the seller in accordance with the Purchaser designs, specifications or instructions express or implied or

b) Alleging injury, death, loss or damage to any third party or property of third party by reason of any defect in any of the goods when the same have been supplied by the Company in accordance with the Purchasers designs, specifications or instructions express or implied

12. CONSUMERS – GOVERNED BY DSR (Distance Selling Regulation) details upon application to the Company

13. EXPORT – Details upon application to the Company

14. LAWThe formation, existence and construction of this contract of terms and conditions is Governed by English Law and shall be subject to the jurisdiction of English Courts


71 Cannock Street Leicester LE4 9HR Tel: 0116 276 4987 Fax: 0116 274 1751

E-mail: [email protected] www.rosshandling.co.uk

castors wheels - find the needlepdfs.findtheneedle.co.uk/108419-1185.pdf · 2014. 10. 1. · 4 ross...

Documents