case product index2!20!09

CASEProduct Index

Table of ContentsAliphatic Monomers and Polyisocyanates ........................................................... 1

Aromatic Monomers, Polyisocyanates and Prepolymers ..................................... 5

Textile Curatives, Crosslinking Agents, Catalysts and Solutions .......................... 10

Waterborne Resins for Coatings ........................................................................... 12

Waterborne Resins for Adhesives ........................................................................ 14

Polychloroprene Rubber for Adhesives ................................................................ 15

Hydroxyl-Functional Polyurethanes for Adhesives ............................................... 16

UV Curable Resins ................................................................................................ 17

UV Curable Dispersions ....................................................................................... 19

Unsaturated Polyesters for Conventional Curing ................................................. 20

Saturated Hydroxyl Terminated Polyesters .......................................................... 21

Linear Polycarbonate Polyesters .......................................................................... 22

Hydroxyl Terminated Polyacrylates ...................................................................... 23

Amine Functional and Polyaminoalcohol Coreactants ......................................... 23

Polyether Polyols ................................................................................................. 24

Crosslinkers for Polyurethane Powder Coatings .................................................. 27

Polyesters for Powder Coatings ........................................................................... 27

Trust the Proven Power of Polyurethane Coatings, Adhesives and SealantsBuilt on Bayer Technology

The product data listed is provided as general information only. They are approximate values and are not considered part of the product specifications.Note: Viscosity in mPa•s is 23˚C or 25˚C unless otherwise noted.


Aliphatic IsocyanatesMonomeric Aliphatic Diisocyanates

Base Solids NCO Equiv. Visc. Weight per Product Isocyanate % Solvent Wt. % Wt. mPa•s gal., lbs Application Areas Features / Benefits Desmodur® H HDI 100 - 49.7 84 3 8.76 Aliphatic oligomers Provides flexibility, and prepolymers for weather stability coatings, adhesives and elastomer applications

Desmodur® I IPDI 100 - 37.5 111 10 8.84 Prepolymers and PU Provides optical clarity, dispersions for coatings, hardness and elastomers, adhesives and weather stability sealant applications

Desmodur® W H12

MDI 100 - 31.8 132 30 8.90 Prepolymers and PU Provides optical clarity, dispersions for coatings, weather stability, superior elastomers, adhesives and mechanical properties and sealant applications resistance to hydrolysis

Desmodur N – HDI Biuret

Base Solids NCO Equiv. Visc. Weight per Product Isocyanate % Solvent Wt. % Wt. mPa•s gal., lbs Application Areas Features / Benefits

Desmodur® N 100

Desmodur® N 3200

Desmodur® N 75 BA

Desmodur® N 75 BA/X

HDI

HDI

HDI

HDI

100

100

75

75

-

-

BA

BA/ X (1:1)

191

183

255

255

7500

1750

150

150

2K-PUR systems for auto-motive refinish, wood/furniture, industrial, plastics and maintenance coatings

2K-PUR systems for auto-motive refinish, wood/fur-niture, industrial, plastics and maintenance coatings



Outstanding weather stability and gloss retention, non-yellowing, high chemical resistance, goodcompatibility

Lower viscosity than Des-modur® N 100, especially for weather-stable and non-yel-lowing high solids coatings

Outstanding weather stability and gloss retention, non-yellowing, high chemical resistance, good compatibility, HAPS free

Outstanding weather stability and gloss retention, non-yellowing, high chemical resistance, good compatibility

9.51

9.33

8.85

8.85

22.0

23.0

16.5

16.5

Desmodur N – HDI Trimer


Desmodur® N 3300A

Desmodur® N 3390A BA/SN

Desmodur® N 3790 BA

Desmodur® N 3800

HDI

HDI

HDI

HDI

100

90

90

100

-

BA/SN 100(1:1)

BA

-

193

214

236

382

3000

500

1600

6000

2K-PUR systems for automo-tive OEM, automotive refinish, plastics and industrial coatings

2K-PUR systems for automo-tive OEM, automotive refinish, plastics and industrial coatings

2K-PUR systems for automo-tive refinish and industrial coatings

2K-PUR coatings for plastics (soft feel coatings), stone-chip protection systems

Outstanding weather stability and gloss retention, non-yellowing


High functionality, fast-drying, weather stable and non-yellowing

Highly flexible, weather stable, increased formulation latitude as blend partner with other hardeners.

9.75

9.41

9.41

9.33

21.8

19.6

17.8

11.0

1



Desmodur® N – Low Viscosity HDI Polyisocyanates

Base Solids Solvent NCO Equiv. Visc. Weight per Product Isocyanate % Wt. % Wt. mPa•s gal., lbs Application Areas Features / Benefits

Desmodur® N 3400

Desmodur® N 3600

Desmodur® XP 2410

Desmodur® XP 2580

HDI

HDI

HDI

HDI

100

100

100

100

-

-

-

-

193

183

175

210

140

1100

700

350

Reactive thinner or hardener for high solids and waterborne 2K-PUR coatings

2K-PUR systems for auto-motive OEM, automotive refinish, plastics and industrial coatings

2K-PUR systems for auto-motive refinish, plastics and industrial coatings

2K-PUR light stable elastomers and are high solids systems

Very low viscosity, light-fast, suitable for high gloss systems as well as for matte moisture cure systems

Low viscosity, weather stable, non-yellowing; for high solids and waterborne systems

Low viscosity, weather stable, non-yellowing; for high solids and waterborne systems: good functionality/viscosity balance

Low viscosity, weather stable, retains gloss and color

9.50

9.66

9.58

9.26

21.8

23.0

24.0

20.0

Bayhydur® – Water Dispersible Polyisocyanates

Weight Base Solids NCO Equiv. Visc. perProduct Isocyanate % Solvent Wt. % Wt. mPa•s gal., lbs Application Areas Features / Benefits

Bayhydur® 302

Bayhydur® 303

Bayhydur® 304

Bayhydur® 305

Bayhydur® 401-70

Bayhydur® VP LS 2150 BA

Bayhydur® VP LS 2306

Bayhydur® XP 2487/1

Bayhydur® XP 2547

HDI

HDI

HDI

HDI

IPDI

IPDI

HDI

HDI

HDI

100

100

100

100

70

70

100

100

100

-

-

-

-

PMA/ X (1:1)

BA

-

-

-

243

218

233

259

447

447

525

204

183

2300

2400

4500

6800

600

500

7500

5400

600

Hardener in waterborne 2K-PUR sys-tems for automotive refinish, plastics, industrial coatings and ahesives

Hardener in waterborne 2K-PUR systems for plastics and industrial coatings and adhesives

Hardener in waterborne 2K-PUR sys-tems for automotive refinish, plastics and industrial coatings

Hardener in waterborne 2K-PUR sys-tems for wood/furniture and industrial coatings

Hardener in waterborne 2K-PUR systems for automotive refinish and industrial coatings, crosslinking Dispercoll C

Hardener in waterborne 2K-PUR systems for automotive refinish and industrial coatings

Hardener in waterborne 2K-PUR systems for plastics and industrial coatings (soft feel coatings)

Hardener in waterborne 2K PUR systems for plastics and industrial coatings

Hardener in 2K waterborne PUR systems; flooring and anti-graffiti coating applications

Outstanding weather stability and gloss retention, non-yellowing. FDA compliant for 175.105

Good chemical resistance, weather stable, non-yellowing

High functionality, good chemical resistance, good dispersibility, weather stable, non-yellowing. FDA compliant for 175.105

Good dispersibility, weather stable, non-yellowing, increased flexibility

Weather stable, non-yellowing, improved hardness, better dry-ing properties, Improved heat resistance and long potlife with Dispercoll C

Weather stable, non-yellowing, improved hardness, better drying properties

High flexibility, weather stable, non-yellowing


Non-yellowing, water dispersible, low viscosity

9.63

9.60

9.66

9.66

8.91

8.83

9.33

9.68

9.60

17.3

19.3

18.0

16.2

9.4

9.4

8.0

20.6

23.0

2



Desmodur® BL 1265 MPA/X

Desmodur® BL 3175A

Desmodur® BL 3272 MPA

Desmodur® BL 3370 MPA

Desmodur® BL 3475 BA/SN

Desmodur® BL 4265 SN

Desmodur® PL 340 BA/SN

Desmodur® PL 350 MPA/SN

Desmodur® VP LS 2078

Desmodur® VP LS 2117

Desmodur® VP LS 2352/1

TDI

HDI

HDI

HDI

HDI/IPDI

IPDI

IPDI

HDI

IPDI

H12

MDI

HDI/IPDI

65

75

72

70

75

65

60

75

60

75

60

PMA/X(1:1)

SN 100

PMA

PMA

BA/ SN 100(1:1)

SN 100

BA/ SN 100 (18:22)

PMA/ SN 100 (11:14)

SN 100:150:200(17.3: 17: 5.7)

SN 100/MPA(1:1)

SN 100/PMA/i-BuOH

(5.8, 13.8, 21.0)

875

378

410

472

510

519

575

400

600

470

583

20000

3000

2400

3500

1000

11000

600

5300

4000

4000

1500

Increases hardness for interior tube/can coatings and stone-chip primer surfacers

Hardener in 1K-PUR baking systems for automotive OEM, can/coil coating and industrial finishes

Hardener in 1K-PUR baking systems for coil coating and industrial finishes

Hardener in 1K-PUR bakingsystems for can/coil coating and industrial finishes

Hardener in 1K-PUR baking systems for industrial finishes, plastics and can/coil coating

Hardener in 1K-PUR baking systems for automotive OEM, can/coil coating and industrial finishes

Hardener in 1K-PUR baking systems for automotive OEM, can/coil coat-ing and industrial finishes

Hardener in 1K-PUR baking systems for automotive OEM, can/coil coat-ing and industrial finishes

Hardener in 1K-PUR baking systems for can/coil coating and industrial finishes

Hardner for lightfast baking PUR systems, formulates high-quality in-dustrial finishes for coil/can coatings

High-grade industrial finishes, especially can/coil coatings; also, used as an additive to improve flex-ibility and adhesion of conventional can/coil coating sytems

Can improve flexibility and resistance to abrasion, impact and chemicals of coatings

High flexibility, good adhesion, weather stable, good chemical resistance

Good stability to thermal yellowing; especially for high build systems

Low baking temperature; high reactivity, weather stable

Low baking temperature; high reactivity, weather stable

Good chemical resistance, high hardness

Low baking temperature, high reactivity, good stability to thermal yel-lowing, high hardness

Low baking temperature, high reactivity, good stability to thermal yel-lowing, high flexilbilty

Good stability to thermalyellowing; good weather stability,

Improves flexibility, tear resistance and adhesionof baking coating systems

Good weather stability and flexibility

9.18

8.80

9.16

9.00

9.16

8.58

8.58

9.16

8.66

8.68

8.25

4.8

11.1

10.2

8.9

8.2

8.1

7.3

10.5

7.0

8.9

7.2

Bayhydur®

– Water Dispersible Polyisocyanates - continued


Bayhydur XP 7165

Desmodur® DA-L

Desmodur® DN

HDI

HDI

HDI

100

100

100

-

-

-

230

210

193

1000

3400

1250

Hardener in waterborne 2K-PUR systems for automotive refinish, plastics and industrial coatings

Crosslinker for waterborne adhesives systems

Crosslinker for waterborne adhesives systems

Low viscosity, easily dis-persible, weather stable, non-yellowing High functionality produces improved water resistance

Lower viscosity for im-proved dispersibility

9.99

9.68

9.60

18.3

20.0

21.8

Desmodur BL – Blocked Aliphatic Polyisocyanates for 1K Polyurethane Baking Systems

Base Solids Blocked Equiv. Visc. Weight per

Product Isocyanate % Solvent NCO Wt. % Wt. mPa•s gal., lbs Application Areas Features / Benefits

3



Desmodur® NZ – HDI/IPDI Polyisocyanates


Desmodur® NZ 1 HDI/IPDI

100 - 210 3000 2K-PUR systems for floor coatings, automo-tive refinish and indus-trial finishes

Solvent-free hardener, good weathering, very good gloss retention and mechanical properties

9.6620.0

Blocked Polyisocyanate Dispersions

Base Solids Blocked Equiv. Visc. Weight per Product Isocyanate % Solvent NCO Wt. % Wt. mPa•s gal., lbs Application Areas Features / Benefits Bayhydur® VP LS 2240 H

12MDI 35 Water/ PMA/X 2.5 1680 20 8.66 Waterborne 2K PUR High flexibility, good adhesion,

(56: 4.5: 4.5) systems for industrial weather stable, good coatings applications, chemical resistance espec. glass coatings especially vs alkali Bayhydur® VP LS 2310 HDI 37 Water/NMP/ 3.7 1135 6500 9.18 Water-thinnable, lightfast, Improves flexibility, impact DMEA 1K-PUR baking coatings strength and adhesion of (54.9: 5: 2.6) aqueous baking systems

Desmodur® Z – IPDI Trimer


Desmodur® Z 4470 BA

Desmodur® Z 4470 MPA/X

Desmodur® Z 4470 SN

Desmodur® Z 4470 SN/BA

IPDI

IPDI

IPDI

IPDI

7 0

7 0

7 0

7 0

BA

PMA/X(1:1)

SN 100

SN 100/BA (2:1)

353

353

353

353

550

1200

1600

1000

2K-PUR systems for auto-motive OEM and refinish; also as additive in alkyd refinish systems




Outstanding weather stability and gloss retention; compat-ible with aliphatic solvents; HAPS free

Outstanding weather stability and gloss retention; compat-ible with aliphatic solvents



8.75

8.83

8.75

8.66

11.9

11.9

11.9

11.9

4

Aliphatic Prepolymers

Base Solids NCO Equiv. Visc. Weight perProduct Isocyanate % Solvent Wt. % Wt. mPa•s gal., lbs Application Areas Features / Benefits

Desmodur® E-3265 HDI 65 PMA/SN 100 10.4 404 1200 8.70 Moisture curing Good weathering,non-yellowing (6: 29) 1K-PUR systems Desmodur® VP LS 2371 IPDI 100 - 3.7 1100 13000 8.70 Binder for elastic Provides resistance to hydrolysis coatings compounds and surface sealing

Baytec® WP-260 H12

MDI 100 - 26.4 159 280 9.00 Light stable elastomers, Clear, light-stable, room- Polyether prepolymer temperature processable with based on PPG high hardness capabilities, used in coatings and adhesives

Desmodur® XP 2617 HDI 100 - 12.5 328 4250 9.07 Two component Desmodur XP 2617 is a low polyurethane, polyurea, monomer, largely linear and hybrid sealants isocyanate prepolymer



Aromatic Isocyanates and PrepolymersMonomeric Aromatic Diisocyanates Chemical Commercial NCO Viscosity Equiv. Typical Product Description Form Wt. % mPa•s Wt. Funct. Application Areas Features / Benefits

Mondur® M 4-4’-Diphenylmethane Fused 33.6 Solid 125 2 Elastomers High performance PUR Diisocyanate (MDI) flaked or TPU’s Special storage temp. molten Adhesives required Coatings Fibers

Mondur® ML Mixture of 4,4’- and 2,4’- Light 33.6 10 125 2 Synthetic surfaces Liquid monomeric Diphenylmethane yellow Binders isocyanate Diisocyanate (MDl) liquid Elastomers Low vapor pressure Coatings, Adhesives Good low-temperature Sealants properties Mondur® TDS 2,4-Toluene Clear to 48 3 87.5 2 Elastomers Production of low free TDI Diisocyanate (TDI) light yellow Coatings monomer prepolymers liquid Adhesives Foams

Mondur® TD-65 65/35 mixture of 2,4 Clear to 48 3 87.5 2 Elastomers Unique isomer ratio and 2,6-Toluene light yellow Foams Diisocyanate (TDI) liquid

Mondur® TD-80 80/20 mixture of 2,4- Clear to 48 5 87.5 2 Elastomers Excellent flowability and 2,6-Toluene light yellow Coatings Low temp. stability Diisocyanate (TDI) liquid Adhesives, Sealants Largest commercial Foams TDI version

Special TDI Bayer can also produce blends of its TDI products to offer custom isomer ratios. Contact our Isocyanate Product Management Blends Group for more information at 412-777-2000. Special Blends Bayer can also produce blends of its TDI and MDI isocyanates to meet customer needs. Contact our Isocyanate Product TDI and MDI Management Group for more information at 412-777-2000.

Special MDI Bayer can also produce blends of its MDI products to offer custom products. Contact our Isocyanate Product Management Blends Group for more information at 412-777-2000.

5

Modified MDI Diisocyanates

Chemical Commercial Solids NCO Viscosity Equiv. Typical Product Description Form % Wt. % mPa•s Wt. Funct. Applications Features Mondur® PF Modified MDI Light 100 22.9 650 183 2 High property Liquid 4,4’ -MDI yellow sealants and prepolymer modified MDI liquid coatings Mondur® PC Modified MDI Clear to 100 25.8 145 163 2.1 Elastomers, Low viscosity light yellow High-property High performance liquid sealants and coatings

Mondur® CD Uretonimine Clear to 100 29.5 50 143 2.2 High-performance Low viscosity modified MDI yellow liquid elastomers, High NCO content coatings, sealants, adhesives



Desmodur® L

Desmodur® IL

Desmodur® HL

Desmodur® L/IL/HL

Base Solids Solvent NCO Equiv. Viscosity Weight per Product Type Unique Properties andProduct Isocyanate % Wt.% Wt. mPa•s gal., lbs and Description Typical End-Use

Desmodur® L 67 BA

Desmodur® L 67 MPA/X

Desmodur® L 75

Desmodur® IL BA

Desmodur® IL EA

Desmodur® IL 1451

Desmodur® HL BA

TDI

TDI

TDI

TDI

TDI

TDI

HDI / TDI

67

67

75

51

51

51

60

BA

PMA/X

EA

BA

EA

BA

BA

Desmodur® L 67 BA is an aromatic polyi-socyanate based on toluene diisocyanate (TDI)

Desmodur® L 67 MPA /X is an aromatic polyisocyanate based on toluene diisocya-nate (TDI)

Desmodur® L 75 is an aromatic polyiso-cyanate based on toluene diisocyanate (TDI)

Desmodur® IL BA is an aromatic polyisocya-nate based on toluene diisocyanate (TDI)

Desmodur® IL EA is an aromatic polyisocya-nate based on toluene diisocyanate (TDI)

Desmodur® IL 1451 is an aromatic polyi-socyanate based on toluene diisocyanate

Desmodur® HL BA is an aliphatic/aromatic polyisocyanate copoly-mer based on toluene diisocyanate (TDI) and hexamethylene diisocyanate (HDI)

Used to formulate air-drying two-component polyurethane coatings and adhesives



Extremely fast-curing, two-component coatings for wood and metal

Extremely fast-curing, two-component coatings for wood and metal

Hardener component for fast-drying two-component polyurethane coatings, used in industrial wood and furniture finishing

Fast-curing, two-component coatings for furniture and metal; improved light stability over Desmodur® L polyisocyanates

350

350

315

525

525

570

400

600

1600

1600

2000

700

250

2200

9.5

9.6

9.8

9.1

9.3

8.9

9.4

11.9

11.9

13.3

8.0

8.0

7.4

10.5

6



Desmodur® R Polyisocyanates

Base Solids Solvent NCO Equiv. Viscosity Weight per Product Type Unique Properties and Product Isocyanate % Wt. % Wt. mPa•s gal., lbs and Description Typical End-Use

Crosslinker for sol-ventborne polyurethane and polychloroprene adhesives

Desmodur® RC is a solution of the polyisocyanurate of toluene diisocyanate (TDI)

Crosslinker for sol-ventborne polyurethane and polychloroprene adhesives

Rapid curing, high heat resistance, bond discoloration occurs

Crosslinker for solventborne polyurethane and polychloro-prene adhesives; light colored product, slower cure than Desmodur RE or RFE

Rapid curing, high heat resistance, minimal discoloration of bond

Desmodur® RE

Desmodur® RC

Desmodur® RFE

Triphenyl methane- 4,4’,4” -triisocyanate

TDI trimer

Tris- (p-isocya-natophenyl) thiophosphate

27

35

27

EA

EA

EA

452

600

583

3

3

3

8.2

n/a

8.3

9.3

7.0

7.2

7

Polymeric MDI

Chemical Commercial Solids NCO Viscosity Equiv. Typical Product Description Form % Wt. % mPa•s Wt. Funct. Applications Features

Mondur® 448 Modified Brown/ 100 27.7 140 152 2.2 Adhesives, Low vapor pressure Polymeric MDI amber liquid coatings, elastomers, Good flowability synthetic surfaces, binders

Mondur® MRS 2,4’-MDI rich Brown/ 100 31.5 200 133 2.6 Coatings, Low vapor pressure Polymeric MDI amber liquid adhesives, sealants

Mondur® MR Polymeric MDI Brown/ 100 31.5 200 133 2.8 Coatings, Multi-purpose Light light amber adhesives, liquid encapsulants

Mondur® 582 2,4’-MDI rich Brown/ 100 32.0 70 131 2.5 Coatings, Low vapor pressure Polymeric MDI amber liquid adhesives, Low viscosity elastomers

Mondur® MRS-5 2,4’-MDI rich Brown/ 100 32.3 55 130 2.4 Coatings, Multi-purpose Polymeric MDI amber liquid elastomers, adhesives, encapsulants, synthetic surfaces

Mondur® MR-5 Polymeric MDI Brown/ 100 32.5 50 129 2.4 Coatings, adhesives Low viscosity amber liquid specialty elastomers High monomer

Mondur® MRS-4 2,4’-MDI rich Brown/ 100 32.5 40 129 2.4 Coatings, Low viscosity Polymeric MDI amber liquid elastomers, adhesives, Good flowability encapsulants, Excellent low-temperature synthetic surfaces stability

Mondur® 1488 2,4’-MDI rich Amber liquid 100 32.9 30 128 2.3 Coatings Low functionality Polymeric MDI adhesives, elastomers, Low vapor pressure encapsulants Good flowability

Mondur® MRS-2 2,4’-MDI rich Amber liquid 100 33.0 25 127 2.2 Coatings, Low functionality Polymeric MDI elastomers, Low vapor pressure encapsulants, Good flowability adhesives

1. Additional Polymeric MDI products are available. Contact our Isocyanate Product Management Group for more information at 412-777-2000.



TDI Prepolymers

MDI Prepolymers

Prepolymers

Weight per Base Solids NCO Equiv. Viscosity gal., Product Type Unique Properties and Product Isocyanate % Solvent Wt. % Wt. mPa•s lbs and Description Typical End-Use

Desmodur® E-1160 MPA/X is a toluene diisocyanate (TDI) based prepolymer

Desmodur® E-14 is a solvent-free, linear aromatic pre-polymer based on toluene diisocyanate (TDI)

Mondur® 1437 is an MDI- terminated polyether prepolymer

Mondur® MP-095 is an aro-matic isocyanate prepolymer based on MDI

Desmodur® E-23A is a solvent free aromatic polyisocyanate prepolymer based on diphenylmethane diisocyanate (MDI)

Desmodur® E-28 is a polyisocyanate prepolymer based on diphenylmethane diisocyanate (MDI)

Desmodur® E-743 is a polyisocyanate prepolymer based on diphenylmethane 4,4’-diisocyanate (MDI)

Desmodur® E-744 is an aromatic polyisocyanate prepolymer based on diphenylmethane 4,4’-diisocyanate (MDI)

Low monomer contentprepolymer

Solvent free prepolymer

Used for wood coatings, wall and ceiling paneling, boats and furni-ture; clear impregnating systems provide long-term protection against moisture, oil, fuel, chemical and mechanical damage

Used in the formulation of two-component coatings and sealants

Processing ease and low viscosity; used in moisture cured binders

Used as bonding material in foam applications

One-component moisture cure adhesive for bonding wood and other substrates; can also be used as a one-component primer, concrete sealants; two-component thick section coating

Used to formulate zinc-rich primers to give galvanic protection; one-compo-nent moisture cure polymer adhesive for bonding wood and other substrates and sealing porous substrates

Membranes, sealants, flexible adhe-sives and coatings, two-component high-solids systems; adhesive flexibilizer for Desmodur E-28

Produces two-component high-solids adhesives and coatings systems for deck and roof coatings, product finishing, or coatings for solvent sensitive substrates

For use in FDA 175.105 compliant adhesives and coatings

In the formulation of two-component polyurea caulks & sealants with Desmophen® NH 1420 & NH 1520

Desmodur® E-1160 MPA/X

Desmodur® E -14

Mondur® 1437

Mondur® MP- 095

Desmodur® E-23A

Desmodur® E-28

Desmodur® E-743

Desmodur® E-744

Desmodur® VP LS2397

Desmodur® E 210

TDI

TDI

MDI

MDI

MDI

MDI

MDI

MDI

MDI

MDI

60

100

100

100

100

100

100

100

100

100

PMA/X(1:1)

-

-

-

-

-

-

-

-

-

780

1200

420

440

263

255

525

179

750

420

550

6800

2500

4200

1600

6100

2500

600

10000@

50˚C

2500

8.9

8.8

9.1

9.3

9.4

9.5

9.0

10.1

-

9.1

5.4

3.3

10.0

9.6

16.5

16.5

8.0

23.5

5.6

10.0

8



Prepolymers – continued

Base Solids NCO Equiv. Viscosity Weight per Product Type Unique Properties andProduct Isocyanate % Solvent Wt. % Wt. mPa•s gal., lbs and Description Typical End-Use

Polyether Based Prepolymers

Baytec® MP-030 is a MDI-terminated polyether prepolymer





Low viscosity and low isocyanate content; used in rubber crumb binders, flex-ible caulks, and sealants

Forms clear moisture-cured films; used in rubber crumb binders, flexible caulks, and sealants

Hydrolysis and bacteria resis-tant; used in pipe lining and conveyor rolls and sealants

Low viscosity; used in adhesives, binders, spray and solid elastomers

Low-temperature stability and inherent flexibility; used in casting systems for cable splicing, and flexible parts

Baytec® MP-030

Baytec® MP-080

Baytec® MP-090

Baytec MP-210

Baytec MP-230

MDI

MDI

MDI

MDI

MDI

100

100

100

100

100

-

-

-

-

-

1105

525

467

194

178

8000

2500

80°C / 225 100°C/ 115

330

550

8.9

9.1

10.0

9.7

10.8

3.8

8.0

9.0

21.6

23.5

High viscosity; used as an epoxy flexibilizer and to formulate liquid, solvent-free polyurethane systems

Epoxy flexibilizer; also used to produce membranes, seal-ants, and casting compounds

Desmocap® 11A is a branched aromatic urethane polymer with ether groups

Desmocap® 12A is a linear aromatic urethane polymer with ether groups

Desmocap® 11A

Desmocap® 12A

TDI

TDI

100

100

-

-

1400

2000

90000

33000

8.7

8.7

3.0

2.1

Desmocap®

Silane – Terminated Prepolymers

Solids Viscosity Weight per Product Type Unique Properties andProduct % Diluent mPa•s gal., lbs and Description Typical End-Use

Desmoseal® XP 2458 is a silane-terminated polyurethane prepolymer

A silane-terminated polyurethane prepolymer

Moisture cures with the absence of bubbles, binder for flexible adhesives, sealants and coatings

For moisture curing coatings,sealants and adhesives

90

100

Mesamoll

-

35,000

40,000

8.5

8.4

Desmoseal® S XP 2458

Desmoseal® S XP 2636

9

Base Solids NCO Equiv. Viscosity Weight per Product Type Unique Properties andProduct Isocyanate % Solvent Wt. % Wt. mPa•s gal., lbs and Description Typical End-Use


The product data listed is provided as general information only. They are approximate values and are not considered part of the product specifications.Note: Viscosity in mPa•s is 23˚C or 25˚C unless otherwise noted. 10

MDI Allophanates

Chemical Solids NCO Viscosity Equiv. Product Description % Wt. % mPa•s Wt. Applications/Features

Allophanate modified 4,4’ - diphenylmethane diisocyanate (MDI)

Allophanate modified 4,4’ - diphenylmethane diisocyanate (MDI)

Allophanate modified 4,4’ - diphenylmethane diisocyanate (MDI) blended with polymeric diphenylmethane diisocyanate containing 2,4’ - isomer

An isocyanate-terminated (MDI) prepolymer mixed with an allophanate modified 4,4’ - diphenylmethane diisocyanate (MDI)

Allophanate modified 4,4’- diphenylmethane diisocyanate (MDI)

An isocyanate-terminated (MDI) prepolymer mixed with an allophanate modified MDI

An isocyanate-terminated (MDI) prepolymer mixed with an allophanate modified 4,4’ - diphenylmethane diisocyanate (MDI)

Low freeze point; high solids, solvent-free two-component used in truck bedliners, adhesives, sealants and carpet backing

High monomer content, low freeze point; used in high-performance sealants and coatings

Low NCO content, low freeze point; used in microcellular foams

Low freeze point; used in spray elastomers and adhesives

High solids, solvent-free two-component adhesives and sealants

Low viscosity; used in elastomers, coatings and sealants

Used as a raw material for the preparation of two component urethane coatings, sealants, and adhesives

Mondur® MA-2300

Mondur® MA-2600

Mondur® MA-2601

Mondur® MA-2603

Mondur® MA-2902

Mondur® MA-2903

Mondur® MA-2904

100

100

100

100

100

100

100

180.3

162

145

262

145

221

350

450

100

100

1000

40

400

1400

23.0

26.0

29.1

16.0

29.0

19.0

12.0

1. Additional allophanate products are available. Contact our Isocyanate Product Management Group for more information at 412-777-2000.

Impranil High Solids Polyurethane Prepolymers with Blocked Isocyanate Groups

Solids Viscosity Product Description Solvent % mPa•s Applications/Features Impranil HS-62 Aromatic/Polyether PMA 98 70000 Transfer coating process as topcoat, intermediate coat, and adhesion coat. Hydrolysis resistance, soft film

Impranil HS-80 Aromatic/Polyether PMA 90 55000 Transfer coating process as topcoat, intermediate coat, and adhesion coat. Hydrolysis resistance, medium film hardness

Impranil HS-90 Aromatic/Polyether PMA 90 50000 Transfer coating process as topcoat, intermediate coat, and adhesion coat. Hydrolysis resistance, medium film hardness

Impranil HS-130 Aromatic/Polyether None 100 130000 Transfer coating process as topcoat, intermediate coat, and adhesion coat. Hydrolysis resistance, hard film


The product data listed is provided as general information only. They are approximate values and are not considered part of the product specifications.Note: Viscosity in mPa•s is 23˚C or 25˚C unless otherwise noted.11

Imprafix Crosslinking Agents and Catalysts

Solids Viscosity Product Description Solvent % mPa•s Applications/Features

Imprafix TH solution Aromatic Polyisocyanate EA 75 1600 Crosslinker for waterborne products

Imprafix VP LS 2330 Alkyl Amine None 100 <100 Crosslinker for Impranil HS products

Imprafix HS-C Alkyl Amine None 100 <100 Crosslinker for Impranil HS products

Solids Viscosity Product Description Solvent % mPa•s Applications/Features Impranil EWN-13 Aromatic/Polyether DMF/Toluene/MEK 35 22500 Transfer and direct process as topcoat, hydrolysis resistance, flexible with excellent adhesion

Impranil ELH A/1 Aliphatic/ Toluene/IPA/PGME 30 35000 Transfer and direct process as topcoat, Polycarbonate hydrolysis resistance, light stable

Impranil 1K Polyurethane Solutions



Waterborne ResinsBayhydrol Polyurethane Dispersions for Coatings and Adhesives

Weight Tensile Elong. 100% Solids Cosolvent Viscosity per gal., Strength, at Modulus, TgProduct wt. % % Cosolvent mPa•s pH lbs. psi break,% psi (˚C) Type

Bayhydrol® 110 35 15 NMP 50-300 7.5-9.5 9.20 5900 180 4200 -22 polyester

Bayhydrol® 122 35 15 NMP 50-400 7.0-9.0 9.18 5000 150 4100 -29 polycarbonate

Bayhydrol® 124 35 12 NMP 50-400 7.0-9.0 9.18 5000 275 1300 -32 polycarbonate

Bayhydrol® 140AQ 40 1 Toluene 100-700 6.0-8.0 8.75 5300 450 800 -45 polyester

Bayhydrol® PR 240 40 0 none 10-500 6.0-8.0 9.18 3500 600 350 -47 polyester

Bayhydrol® PR 340/1 40 0 none 10-500 6.0-7.0 9.18 3500 500 350 -47 polycarbonate

Bayhydrol® PR 535 35 5 NMP 10-900 7.0-9.0 8.70 3000 200 2500 -45 polyester-polycarbonate

Bayhydrol® VP LS 2305 40 0 none 11-18 sec (DIN 4) 6.5-8.5 8.34 polyester

Bayhydrol® VP LS 2952/1 40 0 none 10-30 sec (DIN 4) 6.5-7.5 8.30

Bayhydrol® XP 2558 37 0 none < 100 8.0-9.0 8.71 6500 350 polyurethane

Bayhydrol® XP 2637 40 0 none < 1000 7.0 - 9.0 8.40 3500 220 1100 -33 polycarbonate

Bayhydrol Polyurethane Dispersions and Polyacrylics for 2K Applications

Weight % OH Solids Cosolvent Viscosity per gal., Equivalent based on Product wt. % % Cosolvent mPa•s pH lbs Weight solid resin Type

Bayhydrol® A 145 45 8 SN100/EGMBE 400-1500 7.5-8.5 8.83 1145 3.3 OH functional polyacrylic (1:1)

Bayhydrol® PT 241 41 5 NMP 500-1500 7.8-8.8 9.16 1659 2.5 OH functional polyester

Bayhydrol® PT 355 55 2 NMP 250-650 7.0-7.5 8.91 2061 1.5 OH functional polyester- polycarbonate

Bayhydrol® VP LS 2239 35 5 NMP approx. 4000 approx. 8.0 8.66 1056 4.6 OH functional polyester

Bayhydrol® XP 2470 45 8 SN 100/PGNBE approx. 2000 approx. 7.8 8.83 969 3.9 OH functional polyacrylic (1:1)

Bayhydrol® XP 2542 50 1 PGNBE 1000-3500 approx. 7.5 8.83 630 5.4 OH functional polyacrylic

Bayhydrol® XP 2546 41 0 none 35-200 approx. 7.5 8.76 1000 4.15 OH functional polyacrylic

Bayhydrol® XP 2591 35 0 none <1000 6.5-8.5 9.16 1214 4.0 OH functional polyester

Bayhydrol® XP 2601 45 8 SN 100/PGNBE 35-200 approx. 7.8 8.83 969 3.9 OH functional polyacrylic (1:1)

Bayhydrol® XP 2646 50 1 PGNBE 1000-3500 approx. 7.5 8.83 630 5.4 OH functional polyacrylic



Tensile Elongation 100% Solids, Viscosity Weight per Strength at break, Modulus, TgProduct wt. % Cosolvent DIN mn cup pH gal., lbs psi % psi (˚C) Type

Baybond® PU 330 30 none 30-140 sec 6.5-8.0 8.3 130 700 100 -52 polyester



Baybond® PU 405 33 none 11-18 sec 6.0-8.0 8.67 900 400 500 n/a polyether

Baybond® PU 406 34.5 none 10-22 sec 5.5-7.5 8.76 1200 275 600 -64 polyether

Baybond® XP 2569 40 none 10-25 sec 7.0-10.0 8.72 900 700 200 -44 polyester

Baybond® Polyurethane Dispersions for Glass Fiber Sizings

Oxidative Cure Dispersions Weight Tensile Elongation 100% Solids Viscosity per Strength, at Modulus, Tg Product wt. % Cosolvent (mPa•s) pH gal., lbs psi break % psi (˚C) Applications

Bayhydrol® B 130 30 none 1600-3000 8.5-9.1 8.34 n/a n/a n/a -89 Primers for metal

Bayhydrol® XP2557* 35 none <100 8.0-9.0 8.54 4350 280 -77 Sealers and coatings for wood. Excellent black heel mark resistance. Parquet sealers and coatings

Bayhydrol® XP 2592 45 none approx. 300 approx. 7.2 8.73 n/a n/a n/a n/a Primers and high gloss coatings for metal with good anti-corrosion properties

Bayhydrol® XP2593/1* 35 none <100 8.0-9.0 8.6 6500 350 2900 n/a Sealers and coatings for wood. Excellent black heel mark resistance

Tensile Elongation 100% Solids, Viscosity Weight per Strength at break, Modulus, TgProduct wt. % Cosolvent (mPa•s) pH gal., lbs psi % psi (˚C) Type

Impranil® DLC-F 40 none < 1000 7.0-9.0 8.76 3000 250 1 000 -33 polycarbonate

Impranil® DLN 40 none 10-500 5.0-8.0 9.18 2900 700 300 -47 polyester

Impranil® DLP 50 none 150-800 6.0-9.0 9.15 500 740 200 -79 polyester

Impranil® DLS 50 none < 70 sec (DIN 4) 6.5-8.5 9.16 3600 600 300 -50 polyester

Impranil® DLU 60 none < 90 sec (DIN 4) 7.0-9.0 8.63 3600 700 360 -65 polycarbonate- polyether

Impranil® DLV/1 40 none 10-40 sec (DIN 4) 5.5-7.5 9.16 2900 500 360 -47 polycarbonate- polyether

Impranil® Polyurethane Dispersions for Textile Coatings and Adhesives

* TSCA approval pending



Dispercoll® U Polyurethane Dispersions for Adhesives

Tensile Elongation 100% % OH Initial Solids, Viscosity Weight per Strength at break, Modulus, Tg based on Heat PeelProduct Name wt. % Cosolvent mPa•s pH gal., lbs psi % psi (˚C) solid resin Activation Strength

Dispercoll® U 42 ** 50 none 150-800 6.0-9.0 8.91 500 740 200 -79 0 - -

Dispercoll® U 53 ** 40 none 50-600 6.0-9.0 8.91 5600 710 1200 -57 0.14 + ++

Dispercoll® U 54 50 none 40-600 6.0-9.0 8.91 5600 820 1100 -57 0.13 + ++

Dispercoll® U 56 ** 50 none 50-900 6.0-9.0 8.93 4100 860 1100 -60 n/a ++ -

Dispercoll® U KA 8755 ** 45 none < 1000 6.0-9.0 8.91 -62 n/a - +

Dispercoll® U XP 2578 40 none < 1000 6.0-9.0 8.76 5600 710 1200 -57 0.14 + ++

Dispercoll® U XP 2643 ** 40 none < 1000 6.0-9.0 8.91 n/a n/a n/a -48 n/a n/a n/a

Dispercoll U XP 2699 45 none < 1000 6.0-9.0 8.91 1500 800 300 -58 n/a n/a n/a

** Complies with 21 CFR 175.105 (Adhesives) as a component of polyurethane adhesives that comply with 21 CFR 175.105

Latent Reactive Crosslinker for Polyurethane Dispersions for Adhesive Applications

NCO Solids ViscosityProduct Type Content % Content % mPa•s Application

Dispercoll® BL XP 2514N Encapsulated 8 40 ca 5000 Latent reactive crosslinker for polyurethane TDI-dimer suspension dispersions

Form Polymer Viscosity GelProduct Name Supplied Content% pH mPa•s Crystallization Content Applications

Dispercoll® C-74 white 58 12.5 ca 100 medium high Adhesives with long open tack time, liquid relatively high uncrosslinked heat resistance

Dispercoll® C-84 white 55 12.5 ca 100 fast/high medium Rapid development of bond strength liquid

Dispercoll® C VP LS 2372H white 58 12.5 ca 100 slow/low low Adhesives with long open time and adhesion to liquid non-polar substrates

Viscosity Particle Specific Density Product Name Type Concentration% pH mPa•s Size, nm Surface, m sq/g g/cm3 Applications

Dispercoll S 3030 SiO2 30 10 max. 7 9 300 1.21 Adjust Dispercoll C adhesive viscosity, dispersion improve contact bond life & peel strength Dispercoll S 4020 SiO2 40 10 max. 7 15 200 1.29 Adjust Dispercoll C adhesive viscosity, dispersion improve contact bond life & peel strength

Dispercoll S 4510 SiO2 45 10 max. 15 30 100 1.34 Adjust Dispercoll C adhesive viscosity, dispersion improve contact bond life & peel strength

Dispercoll S 5005 SiO2 50 9 max. 30 55 50 1.39 Adjust Dispercoll C adhesive viscosity, dispersion improve contact bond life & peel strength

Dispercoll® C Polychloroprene Dispersions for Adhesives

Dispercoll S Additives for Dispercoll C



Baypren® Polychloroprene Rubber for Adhesives Viscosity Form Specific mPa•s Crystallization Product Name Supplied Gravity 10% in Toluene Rate Applications

Baypren® 213-1 chips 1.23 70-220 medium Contact adhesives with extended open time








Baypren® 310-1 chips 1.23 70-220 high Contact adhesives with rapid strength development Mercaptan modified



Baypren® 321-1 chips 1.23 350-550 high Contact adhesives with rapid strength development Thiuram modified


Baypren® 331-2 chips 1.23 1000-1320 high Contact adhesives with rapid strength development Thiuram modified





Hydroxyl-Functional Polyurethanes for Adhesives

Desmocoll® XP 2597/4 granules 1500-2200 45 ca 30 min. Very good adhesion with a longer tack life than other Desmocoll® 500 grades


Desmomelt® Hydroxyl-Functional Polyurethanes for Adhesives

Desmomelt® 530 granules 1000-1400 55* ca 30 min. High crystallization and low thermoplasicity. For the manufacture of adhesive films, webs & fleece for bonding many materials

Desmomelt® 540/1 granules 100-500 60* ca 10 min. Higher initial bond strength and better thermal stability than Desmomelt® 530



Desmomelt® VP KA 8702 granules 300+/-200 50* ca 10 min. Very high rate of crystallization and very low thermoplasticity. Allows the economic production of industrial textiles as well as footwear and leather goods.

Viscosity Min. Form mPa•s Activation CrystallizationProduct Name Supplied 15% in MEK Temp. ˚C Time Applications

Desmocoll® 140 granules 60-120 45 ca 48h Low crystallizing, laminating applications, use with crosslinker

Desmocoll® 176 granules 400-800 45 ca 48h Medium crystallizing, general applications, use with crosslinker

Desmocoll® 400/1 granules 400-800 50 ca 30 min. Excellent PVC adhesion, moderate heat resistance, crosslinker recommended

Desmocoll® 400/2 granules 800-1200 50 ca 30 min. Excellent PVC adhesion, moderate heat resistance, crosslinker recommended

Desmocoll® 406 granules 400-800 50 ca 72h Excellent PVC adhesion, low initial strength, longer tack life than Desmocoll® 400

Desmocoll® 500/2 granules 400-800 50 ca 5 min. Excellent adhesion to PVC & rubber, extremely high crystallization rate, for two component adhesives

Desmocoll® 526 granules 400-800 50 ca 48h Excellent PVC adhesion, higher initial strength than Desmocoll® 406

Desmocoll® 530/1 granules 380-1000 55 ca 30 min. Excellent PVC adhesion, high initial bond strength and heat resistance






Desmocoll® 621/1 granules 1500-2100 55 ca 2h Good PVC adhesion, long tack life after thermal activation

Desmocoll® 621/2 granules 2100-3100 55 ca 2h Good PVC adhesion, long tack life after thermal activation



* Softening Point, ˚C



Supply Viscosity Dual General Type form % in mPa•s Flooring Furniture Plastics Graphics Films Cure Industrial Properties

Desmolux U 100 Tough but 100 7000 l l l l High abrasion resistance, (previously flexible, aliphatic especially for parquet. VP LS 2258) urethane acrylate Workhorse resin, excellent adhesion to metal Desmolux U 200 Tough but 100 8000 l l Very high abrasion resistance (previously flexible, aliphatic in many test urethane acrylate VP XP 2430) methods, especially for parquet. Workhorse resin Desmolux U 375H* Tough but 75 in HDDA 60000 l l High abrasion resistance, (previously flexible, aliphatic especially for parquet VP LS 2989) urethane acrylate

Desmolux U 400* Hard aliphatic 60 in PTTA 90000 l l Highly resistant films, especially urethane scratch resistance, hard coats hexaacrylate

Desmolux U 500 Tough but 100 6000 l l l l High abrasion and scratch (previously flexible, aromatic resistance, especially for XP 2614) urethane acrylate parquet and cork Desmolux U 680 H Hard, aliphatic 80 in HDDA 29000 l l l Highly resistant films, also for (previously urethane acrylate outdoor applications VP XP 2308)

Desmolux VP LS 2265 Hard, aliphatic 100 800 l l l High hardness and abrasion urethane acrylate resistance, combination product for Desmolux® U100 & U200, high reactivity for low-viscosity coatings

Desmolux XP 2491 Highly flexible, 80 in IBOMA 60000 l Extremely flexible, elongation aliphatic urethane at break >400%, acrylate improves elasticity also in combinations with hard resins

Desmolux XP 2513 Flexible, aliphatic 100 25000 l l l l Highly flexible, improves urethane acrylate elasticity in combination with hard resins. Suitable for flexible applications

Desmolux XP 2587 Hard, aliphatic 100 1500 l l Brilliant coatings with good urethane acrylate, chemical and scratch water emulsifiable resistance

Desmolux XP 2654 Hard, aliphatic 60 in BA 750 l Developed for automotive urethane acrylate clearcoat spot repair

Desmolux XP 2683 Tough but 80 in IBOA 22000 l High abrasion resistance, flexible, aliphatic @ 50˚C excellent adhesion to metal

UV Curable ResinsUrethane Acrylates

* TSCA approval pending



Supply Viscosity NCO Dual Product Type form % in mPa•s % Flooring Furniture Plastics Graphics Films Cure Properties

Desmolux D 100 Hard, 100 12500 12.5 l l l l For dual-cure technology; (previously aliphatic improves adhesion VP LS 2337) urethane and coin test acrylate

Desmolux VP LS 2396 Flexible, 100 12500 7.5 l l l l l For dual-cure technology; aliphatic improves adhesion, urethane coin test and flexibility acrylate

Desmolux XP 2510 Hard, 90 in BA 15000 6.7 l l l l For dual-cure technology; aliphatic improves adhesion, urethane coin-test, high UV acrylate reactivity

*TSCA approval pending

Epoxy Acrylate

Supply Viscosity Dual General Product Type form % in mPa•s Flooring Furniture Plastics Graphics Films Cure Industrial Properties

Desmolux VP LS 2266 Tough but 100 8000 l l l l High reactivity, flexible, excellent adhesion epoxy acrylate to metal hybrid

Polyether Acrylate

Supply Viscosity Dual General

Product Type form % in mPa•s Flooring Furniture Plastics Graphics Films Cure Industrial Properties

Desmolux VP LS 2299* Medium-hard, 100 800 l l l Very high reactivity, aminemodified for low viscosity polyether acrylate coatings, excellent adhesion to metal

Polyester in Reactive Thinner

Supply Viscosity Dual General Product Type form % in mPa•s Flooring Furniture Plastics Graphics Films Cure Industrial Properties

Desmolux P 175 D Hard, gloss 70 in DPGDA 17000 l l l For clear and (previously polyester pigmented primers VP LS 2110) and topcoats; for UP very high reactivity, good sandability, adhesion and intercoat adhesion, improves scratch resistance of UA topcoats

NCO containing Urethane Acrylates for Dual Cure



UV Curable Dispersions Viscosity Neutralizing General Product Type Supply form % in DIN 4 mm cup Agent Furniture Plastics Cork Parquet Industrial PVC Properties Bayhydrol UV 2282 PUR-dispersion 39 in water <50 TEA l l l l High chemical resistance, good grain wetting, physical drying. For all round use (multicoat)

Bayhydrol UV 2317 PUR-dispersion 37 in water <80 TEA l l l l High wet film transparency, good grain wetting

Bayhydrol UV VP LS 2280 PUR-dispersion 39 in water <90 TEA l Outstanding physical drying, high chemical resistance. For pigmented laquers

Bayhydrol UV XP 2629* PUR-dispersion 42 in water <50 TEA l Excellent physical drying, very high chemical and stain resistance, for pigmented coatings

PVCflooring

Bayhydrol UV XP 2687 PUR-dispersion 49 in water <50 TEA l l Excellentgrainwetting, goodadhesionoilywoods, nophysicaldrying,for sealerandadhesion primers

Bayhydrol UV XP 2689 PUR-dispersion 42 in water <50 TEA l l Highest crosslink density, low physical drying. Especially for clear coats or single layer metallic coats.

Bayhydrol UV XP 2690* PUR-dispersion 39 in water <80 TEA l l l Weather stable, tough; especially suited for wood exterior applications, very fast water release

*TSCA approval pending

Legend

Abbreviation Explanation Abbreviation Explanation Abbreviation Explanation

TPGDA Tripropylene HDDA Hexanediol TEA Triethylamine glycol diacrylate diacrylate

DPGDA Dipropylene PTTA Pentaerythol IBOMA Isobornyl-methacrylate glycol diacrylate Tetraacrylate

VP LS...XP...UV LS Trial Products • especially suitable suitable

Solvent

Abbreviation Explanation

BA n-butyl acetate

DMF dimethylformamide

EA ethyl acetate

EGMBE ethylene glycol monobutyl ether

i-BuOH isobutyl alcohol

IPA isopropyl alcohol

MEK methyl ethyl ketone

NMP n-methylpyrrolidone

PGME propylene glycol methyl ether

PGNBE propylene glycol n-butyl ether

PMA/MPA PM acetate

SN100 aromatic 100

X xylene



Unsaturated Polyesters for UV Curing

Wood

Supply form Viscosity Topcoat Topcoat Topcoat Product Type % in mPa•s Putty Sealers matt gloss pigmented Properties

Roskydal 300/1 Tough but 70 in styrene 650 l l Gloss to matt systems: good leveling flexible, gloss and scratch resistance; also for films polyester

Roskydal 502 BA Very hard, 80 in BA 4500 l l lClear and pigmented coatings for gloss polyester application up to max. 100 g/m2 and for pigment pastes; for UP very high UV reactivity after solvent evaporation; virtually non-yellowing; also for films

Roskydal 502 S Very hard, 66 in styrene 525 l Pigmented topcoats for application up to gloss polyester 200 g/m2; good reactivity and resistance to yellowing in the light and dark; also for films

Roskydal E 70 Highly flexible, 65 in styrene 950 l l l lImproves flexibility of styrenic UP requires paraffin systems wax

Unsaturated Polyesters for Conventional Curing

Roskydal 500A Tough but 76 in styrene 1800 l l lHigh brilliance, very low yellowing in flexible gloss the dark, reproducible matt effects; in polyester combination with NC and CAB for thin matt varnishes; excellent leveling and high scratch resistance

Roskydal 502 BA Very hard, 80 in BA 4500 l l lClear and pigmented coatings for gloss polyester application up to max. 100 g/m2 and for pigment pastes; virtually non-yellowing

Roskydal 502 S Very hard, 66 in styrene 525 l Pigmented topcoats for application up to gloss polyester 200 g/m2; good reactivity and resistance to yellowing in the light and dark

Roskydal E 70 Highly flexible, 65 in styrene 950 l l l lImproves flexibility of styrenic UP requires paraffin systems wax

Roskydal 5030 Tough, wax-free 75 in styrene 1525 l l l lWax-free sealers for wood polyester and furniture coatings (clear or pigmented)

Roskydal VP LS 2190 Hard, gloss 100 2,900 l l l lFor clear and pigmented styrene-free UP polyester systems with a solids content of >90%



Saturated Hydroxyl Terminated PolyestersLinear and Branched Polyesters

Viscosity Approximate Molecular Typical OH # Water,% mPa•s Acid # Products Composition Weight mg KOH/g max. @60˚C mg KOH/g, max.

Desmophen® 1700 Diethylene adipate diol 2550 44 0.1 785@73˚C 1.5

Desmophen® 1800 Branched diethyleneglycol adipate 2800 60 0.1 1250@73˚C 1.2

Desmophen® 2000 Ethylene adipate diol 2000 56 0.1 645@73˚C 1

Desmophen® 2001 KS Ethylene adipate diol 2000 56 0.1 645@73˚C 12001 K(uncatalyzed)

Desmophen® 2502 Butylene adipate diol 2000 56 0.05 685@73˚C o.8

Desmophen® 2505 Butylene adipate diol 4000 28 0.05 3800@73˚C 0.8

Desmophen® F-207-60A Branched diethyleneglycol adipate 60 0.05 1750 0.6

Desmophen® F-2408 Branched diethyleneglycol adipate 48 0.05 1925 0.5

Desmophen® S-101 T-55 Ethylene adipate diol 2000 55 0.05 1175 0.6

Desrnophen® S-102-110 Butylene adipate diol 1000 110 0.05 350 0.6

Desrnophen® S-102-210 Butylene adipate diol 520 210 0.04 400@40˚C 0.5

Desmophen® S-102-160 Butylene adipate diol 750 150 0.05 500 0.5

Desmophen® S-105-110 Hexanediol adipate diol 1000 110 0.05 295 0.6

Desmophen® S-107-55 Neopentylglycol adipate diol 2000 55 0.05 2300 0.6

Desmophen® S-107-110 Neopentylglycol adipate diol 1000 110 0.05 700 0.6

Desmophen® S-1011-55 Diethyleneglycol adipate diol 2000 55 0.05 1075 0.6

Desmophen® S-1011P-110 Diethyleneglycol adipate diol 1000 110 0.05 775@40˚C 0.6

Desmophen® S-1011P-210 Diethyleneglycol adipate diol 520 210 0.05 250@40˚C 0.6

Desmophen® S-1015-35 Hexanediol neopentylglycol adipate diol 3100 35 0.04 4000 0.6



Desmophen® S-1017-55 Ethylene propyleneglycol adipate diol 2000 55 0.05 1200 0.6

Desmophen® S-1017C-55 Ethylene propyleneglycol adipate diol 2000 55 0.03 1200 0.5

Desmophen® S-1019-35 Hexanediol Adipate/lsophthalate diol 3100 35 0.05 8500 0.6

Desmophen® S-1019-55 Hexanediol adipate/isophthalate diol 2000 55 0.05 2500 1.8

Desmophen® S-1021-70 Butanediol adipate/isophthalate diol 1600 70 0.04 1900 0.6

Desmophen® S-1028-55 Hexanediol phthalate diol 2000 55 0.05 12000 0.6

Desmophen® S-1028-115 Hexanediol phthalate diol 950 115 0.05 2100 0.6

Desmophen® S-1028-210 Hexanediol phthalate diol 510 210 0.05 500 1

Desmophen® S-1035-55 Hexanediol azelate/isophthalate diol 1950 56 0.05 4050 0.7

Desmophen® S-1040P-55 Ethylene butylene adipate diol 2000 55 0.05 1300 0.6

Desmophen® S-1040P-110 Ethylene butylene adipate diol 1000 110 0.05 400 0.6

Desmophen® S-1095-110 Butylene neopentylglycol adipate/ 1000 110 0.05 1500 0.9 isophthalate diol



Equivalent OH Solids Viscosity Weight/gallon, Weight, avg. Content, Products % Solvent mPa•s lbs. as supplied % Applications

Desmophen® 631A-75 75 PMA 10000-25000 9.2 267 6.4 High solids coatings with similar properties as Desmophen 650A-65

Desmophen® 650A-65 65 PMA/X 10000-20000 9.5 325 5.2 Pigmented coatings with outstanding (6:1) chemical and weather resistance

Desmophen® 651A-65 65 PMA/X 7000-15000 9.2 330 5.2 Pigmented or clear coatings with excellent (6:1) chemical weather resistance and compatibility with other resins

Desmophen® 670A-80 80 BA 2000-31000 9.2 500 3.4 Flexible coatings for metal and plastic, good weather resistance

Desmophen® 680 BA 70 BA 25000-3500 9.0 740 2.3 Higher solids clear and pigmented weatherable coatings

Desmophen® 800 100 - 184000 9.6 200 8.8 Chemical resistant, metal and concrete coatings

Desmophen® 1100 100 - 30500 9.3 262 6.5 Flexible coatings for metal

Desmophen® 1145 100 - 2950-250 1.01 240 0.2 High solids high build coatings for flooring

Desmophen® 1150 100 - 3000-4000 8.3 340 5 High solids high build coatings for flooring Desmophen® 1300 BA 75 BA 800-1200 8.8 567 3 Wood, paper, and metal coatings; fast drying

Desmophen® 1300 X 75 X 3100-3300 8.8 567 3 Wood, paper, and metal coatings, fast drying

Desmophen® 1652A 100 - 9000-13000 9.7 1002 1.7 Flexible coatings for elastomeric roof coatings

Desmophen® F-806P 80 BA/ 2600-4400 10.0 401 4.2 Higher solids, high performance coatings PMA

Desmophen® F-2035 100 - 770-1000 (40˚C) 9.2 216 7.9 Hard abrasion resistant coatings

Desmophen® F-2037-420 100 - 450-520 (40˚C) 10.0 134 12.7 Aliphatic higher solids coatings with good impact and solvent resistance

Desmophen R-12A 100 - 17700 9.4 337 5 Flexible coatings; wood finishes and flooring

Desmophen R221-75 75 PMA 3000-11000 9.2 522 3.3 Weather resistant coatings; excellent grind medium, good flexibility

Polyesters for 2K Systems

Desmophen® C 1100 Aliphatic polycarbonate polyester diol 1000 112 0.05 3200 0.1



Desmophen® C 2200 Aliphatic polycarbonate polyester diol 2000 56 0.05 2300@75˚ C 0.2

Linear Polycarbonate Polyesters _

Approximate Molecular Typical OH # Water,% Viscosity Acid # Products Composition Weight mg KOH/g max. mPa•s mg KOH/g, max.



Polyesters for 2K Systems - Continued Equivalent OH Solids Viscosity Weight/gallon, Weight, avg. Content, Products % Solvent mPa•s lbs. as supplied % Applications

Desmophen® A 160 SN

Desmophen® A 365

Desmophen® A 450 BA

Desmophen® A 450 BA/X

Desmophen® A 870 BA

60 SN 100

65 BA/X (3:1)

50 BA

50 BA/X (1:1)

70 BA

2800

3000

4000

4500

3500

8.3

8.6

8.4

8.4

8.6

1063

586

1700

1700

576

1.6

2.9

1

1

2.95

Good water, detergent and chemical resistance

Air dry coatings with excellent light stabilityand weather resistance

Very fast drying furniture finishes

Very fast drying furniture finishes

Automotive refinish and industrial coatings with excellent weather resistance and light stability

Hydroxyl Terminated Polyacrylates

Amine Functional Coreactants

Viscosity Equivalent Typical Products mPa•s Weight, avg. as supplied Amine Value Properties

Desmophen® NH 1220

Desmophen® NH 1420

Desmophen® NH 1520

Desmophen® NH 1521

Desmophen® LS 2965A

Hardener OZ

100 max.

900-2000

800-2000

110-300

100 max.

5000-10000

230

279

290

325

167

244

240-248

199-203

189-193

168-176

335-355

122

Very low viscosity amine functionalcoreactant or reactive diluent of high reactivity

Amine functional coreactant or reactive diluent with longer gel time. For 2K polyurea coatings & sealants

Amine functional coreactant or reactive diluent with longer gel time, less flexible coatings. For 2K polyurea coatings & sealants

Supplied as 90% in n-butyl acetate

Ketimine-functional reactive partner for polyisocyanates

210-240 Latent aliphatic coreactant based on urethane bisoxazolidine

Polyaminoalcohol Coreactant

Viscosity Arnine Equivalent Amine/Hydroxyl Equivalent TypicalProducts mPa•s Weight, avg. as supplied Weight, avg. as supplied Amine Value Properties

Desmophen® VP LS 2089 75 BA 10000 9.3 283 6 Pigmented aliphatic coatings with good chemical resist and weatherability

Desmophen® XP-7116 80 BA 6000 9.6 386 4.4 High solids, high performance coatings for metal and plastic substrates



Polyether Polyols Typical OH No. Typical Molecular Typical ViscosityProduct Functionality mg KOH/g Weight mPa•s EO Tip

Amine-Based Polyols

Multranol® 4050 4 630 356 18000 No

Multranol® 4063 4 460 488 18000 No

Multranol® 8114 4 395 568 8800 No

Multranol® 8120 4 360 623 25000 No

Multranol® 9138 3 700 240 785 No

Multranol® 9144 3 150 1122 250 No

Multranol® 9170 3 350 481 275 No

Multranol® 9181 4 770 291 36000 No

Sucrose-Based Polyols

Multranol® 4030 5.8 380 856 12500 No

Multranol® 4034 5.2 470 624 33000 No

Multranol® 4035 3 380 438 600 No

Multranol® 9171 6.2 340 1020 9000 No

Multranol® 9196 5.5 470 660 28000 No

Specialty Polyols for Coatings, Adhesives, Sealants & Elastomers (CASE)

Arcol® LG-650 3 650 260 820 No

Arcol® LHT-112 3 112 1500 280 No

Arcol® LHT-240 3 238 707 250 No

Arcol® PPG-425 2 263 426 70 No

Arcol® PPG-725 2 147 763 125 No

Arcol® PPG-1000 2 111 1000 164 No

Multranol® 4011 3 550 306 1650 No

Multranol® 4012 3 370 455 650 No

Multranol® 8116 3 120 1400 285 Yes

Multranol® 9133 3 1,050 160 1350 No

Multranol® 9158 3 470 356 470 No

Multranol® 9185 6 100 3366 670 Yes

Multranol® 9198 2 515 218 55 No

Softcel® U-1000 3 168 1000 220 No


Polyether Polyols – continued

Typical OH No. Typical Molecular Typical ViscosityProduct Functionality mg KOH/g Weight mPa•s EO Tip

Low-Monol Polyols

Acclaim® 703 3 238 700 265 No

Acclaim® 2200 2 56 2000 370 No

Acclaim® 2220N 2 50 2250 340 Yes

Acclaim® 3205 2 35 3000 637 No

Acclaim® 3300N 3 57.6 3000 524 No

Acclaim® 4200 2 28 4000 968 No

Acclaim® 4220N 2 28 4000 860 Yes

Acclaim® 6300 3 28 6000 1470 No

Acclaim® 6320N 3 28 6000 1725 Yes

Acclaim® 8200 2 14 8000 3000 No

Flexible Polyols

Arcol® 11-34 3 35 4800 840 Yes

Arcol® E-351 2 40 2800 490 Yes

Arcol® E-644 6 28 12000 1700 Yes

Arcol® F-3022 3 56 3000 480 No

Arcol® F-3222 3 52.6 3200 520 No

Arcol® LG-56 3 57 3000 480 No

Arcol® LHT-42 3 41 4200 700 No

Arcol® PPG-2000 2 56 2000 370 No

Arcol® PPG-3025 2 37 3000 570 No

Arcol® PPG-4000 2 28 4000 980 No

Hyperlite® E-824 3 35.7 4700 830 Yes

Hyperlite® E-863 3.8 31.5 6870 1100 Yes

Multranol® 3900 3 35 4800 840 Yes

Multranol® 3901 3 28 6000 1120 Yes

Multranol® 9111 2 28 4000 820 Yes

Multranol® 9139 3 28 6000 1150 Yes

Multranol® 9190 2 28 4000 830 Yes

Multranol® 9199 3 37 4525 1100 Yes

Softcel® VE-1000 2.5 94 1500 375 Yes

Ultracel® 3000 4.0 30 7500 1700 Yes


Polyether Polyols – continued

Typical OH No. Typical Molecular Typical ViscosityProduct Functionality mg KOH/g Weight mPa•s EO Tip

Polymer Polyols

Arcol® 24-32 2 32 NA 1220 Yes

Arcol® 31-28 3 28 NA 3000 Yes

Arcol® 34-28 3 27 NA 2240 Yes

Arcol® 34-35 3 47 NA 1260 No

Arcol® E-900 3 25.4 NA 2600 Yes

Arcol® HS-100 3 28.2 NA 3600 No

Hyperlite® E-851 3.8 18.5 NA 6000 Yes

Hyperlite® E-852 3 20.2 NA 5200 Yes

Hyperlite® E-889 3 20.2 NA 5000 Yes

Multranol® 8151 3 28 NA 3600 Yes

Polyols for Encapsulation Systems

Baytec® ENC-30P 3 550 306 1650 No

Baytec® ENC-55P 3 370 45 650 No

Baytec® ENC-140P 3 222 NA 1350 No

Baytec® ENC-340P 3 56 3000 500 No

Baytec® ENC-390P 2 35 4800 840 Yes

Contact Bayer for more detailed information about Actaclear carrier fluids.

27

Rucote® Polyesters for Smooth, Weatherable Polyurethane Powder Coatings

OH Viscosity Rucote® Resin Type Number Poise@200°C ~ Tg (°C) Bake Cycle Features

Rucote® 102 Polyurethane 40 40 57 10’ @ 200°C / 392°F Smooth and excellent gloss, 20’ @ 185°C / 365°F excellent mechanics

Rucote® 106 Polyurethane 42 42 66 10’ @ 200°C / 392°F Good flow and gloss, higher 20’ @ 185°C / 365°F Tg than Rucote 102

Rucote® 107 Polyurethane 47 40 65 10’ @ 200°C / 392°F Excellent gloss and mechanics, 20’ @ 185°C / 365°F high Tg

Rucote® 118 Polyurethane 42 72 68 10’ @ 200°C / 392°F Highest Tg for storage stability, 20’ @ 185°C / 365°F utility in low gloss and wrinkle systems

Rucote® 121 Polyurethane 40 40 58 15’ @ 200°C / 392°F Flexible resin (0 T-bend), great 20’ @ 185°C / 365°F corrosion resistance, utility in low gloss systems

Rucote® Polyesters for Smooth, Chemical Resistant and Matte Finishes

Rucote® 104 Polyurethane 112 40 57 15’ @ 200°C / 392°F Detergent resistance with high 20’ @ 185°C / 365°F gloss and excellent elasticity

Rucote® 117 Polyurethane 110 40 60 20’ @ 200°C / 392°F Anti - graffiti coatings, high chemical resistance, tough with good gloss

Rucote® 109 Polyurethane 265 25 55 15’ @ 210°C / 392°F Used in combination with Rucote 123 or Rucote 118 for one-shot low gloss systems

Rucote® 123 Polyurethane 23 75 64 15’ @ 210°C / 392°F Used in combination with Rucote 109 for one-shot low gloss systems

Rucote® Polyesters for Super Weatherable Polyurethane Powder Coating

Rucote® XP 1003 Polyurethane 55 25 >57 15’ @ 210°C / 392°F Isophthalic acid based for superior outdoor durability

Rucote® XP 1004 Polyurethane 77 30 >57 15’ @ 210°C / 392°F Isophthalic acid based for superior outdoor durability and chemical resistance

Crelan® Crosslinkers for Polyurethane Powder Coatings

Minimum Baking Crelan® Crosslinker Basis NCO % ~Functionality ~ Tg (°C) Temperature @ 15’ Features

Crelan® NI-2 ε caprolactam 14.0 2.2 60.0 180°C / 356°F High gloss in thin film builds blocked IPDI

Crelan® VP LS 2256 ε caprolactam 14.6 2.5 50.0 170°C / 338°F High chemical resistance, blocked IPDI excellent overbake stability

Crelan® NW-5 ε caprolactam 12.5 2.3 55 170°C / 338°F Higher reactivity & elasticity blocked H12MDI

Crelan® EF 403 IPDI Uretdione 13.5 1.9 52 180°C / 356°F No blocking agent, excellent flowout & pigment wetting

Crelan® XP 2459 IPDI Uretdione 18.8 2 60 180°C / 356°F Higher reactivity, chemical resistance, & better mechanics


28

Rucote® Polyesters for 50:50 Hybrid Powder Coatings

OH Viscosity Rucote® Resin Type Acid # Poise@200°C ~ Tg (°C) Bake Cycle Features

551 Epoxy Hybrid 85 25 62 15’ @ 180°C / 356°F Superior flow and leveling

5006 Epoxy Hybrid 85 25 67 10’ @ 185°C / 365°F Excellent flow and leveling

XP 5006-S Epoxy Hybrid 85 25 67 10’ @ 185°C / 365°F Low reactivity resin

Rucote® Polyesters for 60:40 Hybrid Powder Coatings

560 Epoxy Hybrid 55 30 60 15’ @ 200°C / 392°F Excellent flow and chemical resistance

XP 561 Epoxy Hybrid 55 30 60 -- Low reactivity resin, FDA compliant for CFR 175.300

5000 Epoxy Hybrid 55 30 58 10’ @ 200°C / 392°F Superior gloss and DOI

Rucote® Polyesters for 70:30 Hybrid Powder Coatings 570 Epoxy Hybrid 37 50 62.0 15’ @ 200°C / 392°F Cost effective, good flow

Rucote® Polyesters Resins for Standard Outdoor Durability 900900 93:7 TGIC 37 50 70 15’ @ 200°C / 392°F Good flow and mechanics 95:5 HAA

9006 93:7 TGIC 36 34 68 15’ @ 204°C / 400°F Excellent flow and overbake stability

910 93:7 TGIC 35 40 64 10’ @ 200°C / 392°F Excellent flow and 0 T-bend

921 93:7 TGIC 38 18 60 15’ @ 150°C / 302°F High reactivity for low 95:5 HAA temperaturecure

9008 90:10 TGIC 50 25 69.0 15’ @ 190°C / 379°F Enhanced chemical resistance 93:7 HAA

Rucote® Polyesters Resins for Highest Outdoor Durability 945 93:7 TGIC 35 35 60.0 15’ @ 170°C / 338°F Isophthalic acid based, high reactivity

9010 93:7 TGIC 32 42 66.0 15’ @ 190°C / 379°F Isophthalic acid based, high gloss 95:5 HAA


Bayer MaterialScience LLC100 Bayer RoadPittsburgh, PA 15205-9741Contact Number: 412-777-3983

www.bayermaterialscienceNAFTA.com

The manner in which you use and the purpose to which you put and utilize our products, technical assistance and information (whether verbal, written or by way of production evaluations), including any suggested formulations and recommendations are beyond our control. Therefore, it is imperative that you test our products, technical assistance and information to deter-mine to your own satisfaction whether our products, technical assistance and information are suitable for your intended uses and applications. This application-specific analysis must at least include testing to determine suitability from a technical as well as health, safety, and environmental standpoint. Such testing has not necessarily been done by us. Unless we otherwise agree in writing, all products are sold strictly pursuant to the terms of our standard conditions of sale which are available upon request. All information and technical assistance is given without warranty or guarantee and is subject to change without notice. It is expressly understood and agreed that you assume and hereby expressly release us from all liability, in tort, contract or otherwise, incurred in connection with the use of our products, technical assistance, and information. Any statement or recommendation not contained herein is unauthorized and shall not bind us. Nothing herein shall be construed as a recommendation to use any product in conflict with any claim of any patent relative to any material or its use. No license is implied or in fact granted under the claims of any patent.

© Bayer MaterialScience LLC 20621 1/09

case product index2!20!09

Documents