case ih header adapters - bish enterprises ih header adapters: the complete solution ... hydraulic...

508 South D Road - Giltner, NE 68841 61028080 (402) 849-2674 - www.bishenterprise.com - [email protected] Bish Enterprises is a privately owned company and is not affiliated with or endorsed by Case IH® in any way or form. The term “Case IH”, and any images of Case IH® equipment are for descriptive purposes only and in no way infer or imply that any part or accessory sold by Bish Enterprises or advertised on this website is manufactured, sold, or endorsed by Case IH®.

• Highest Quality Adapters on the Market, with Complete Solutions Available! • Large Knowledge Base, We’ve Been Building Adapters Since 1976!

• Improve your Performance in Some Situations. • Quality Conversions, Both Functionally and Cosmetically.

Case IH Header Adapters:

The Complete Solution o We Stock the Adapter(s), Upright Kit(s), Telescoping Power Shaft(s), and Electrical Conversion(s)

Case IH® Heads can be Adapted to Fit Almost Any Combine! o We Offer kits for Case IH ® Headers to:

Cat Challenger® Cat® / Claas® / Lexion® Gleaner® John Deere® Massey Ferguson®

New Holland® White® Oliver® Others Can Be Custom Built

Case IH® Combines can be Adapted to Fit Almost Any Header! o We Offer Kits for Case IH ® Combines to:

Cat Challenger® Cat® / Claas® / Lexion® Gleaner® John Deere®

Massey Ferguson® New Holland® Shelbourne Reynolds® Others Can Be Custom Built

Prices subject to change...Prices valid as of August 2013

PART # Header Manufacturer

TYPE OF HEAD

Header Model #

YearSerial #

Combine Manufacturer

CombineModel #'s

Feederhouse Shaft Length / Shaft

Type

Conversion Type

Additional Informtion

Installation Time

(Hours)

HeaderConversion

Components

TelescopicPower Shafts

Contact Bish Enterprises For Pricing (Series Options Vary)

Bearing Support Kit (No T.P.S.)

Additional Components

Needed

Headsisght®Height

Conversion (Sensor)

700-0027-LL Case IH

Cornheads Only

800 - 900 - 1000 Series

OnlyJohn Deere

All Years4400 - 9650Level Land

Feederhouses

83.69"

21 Spline(Must Specify)

•Bolt in pieces •Remove Feederhouse Chain Cover 2-4

$1,75019" Female 21

Spline 14 Series

21" Male 1-1/8" Hex 14 Series

Single Drive:$300

Double Drive$600

Custom Build

Please Call

Lights Only$175

700-0027-CM Case IH

Cornheads Only

800 - 900 - 1000 Series

OnlyJohn Deere

All Years9600 - S Series Contour Master Feederhouses

83.69"


•Bolt in pieces •Remove Feederhouse Chain Cover 2-4

$1,75019" Female 21

Spline 14 Series


Single Drive:$300

Double Drive$600

Custom Build

Please Call

Lights Only$175

700-0270 Case IH

Cornheads Only

22 - 3400 Series

John Deere

All Years4400 - 9760 / 7700 /

8800 / S / Series Level Land or Contour Master Feederhouses

83.69"


•Requires Hooks on Feederhouse

•Bolt in pieces

•Move or Remove Gearbox, Install Bearing Holder & Change TPS

•New Backshafts Can Be Provided @ an Additional

Cost

2-4$1,995

2x 27-31" Male 1-1/4

Hex Shafts

Single Drive:$300

Double Drive$600

Hydraulic Block

Custom Build

Please Call

Lights Only$175

700-0271 Case IH

Chopping Cornheads

Only

Case 2600 & 4400 Series

John Deere

All Years4400 - 9760 / 7700 /

8800 / S / Series Level Land or Contour Master Feederhouses

83.69"


•Requires Hooks on Feederhouse

•Bolt in pieces

•Verify Backshaft Diameter: 1-1/8" Hex or

30mm are options

•Stub shafts are best option if customer will

approve

3-5$1,995 Already has long

drive shafts, just needs yoke changes.

Already has long drive shafts, just

needs yoke changes.

John Deere Hydraulic Block

Storage Bracket

Stub Shaft

Yoke Change

Custom Build

Please Call

Lights Only$175

700-0272-C Case IH

Cornheads Only

Case 2200 Series

Case IH

All Years1420 / 1440 / 1460 / 1470 / 1480 / 1482

1620 / 1640 / 1644 / 1660 / 1666 / 1670 / 1680 / 1688 / 2144 / 2166 / 2188 / 2344 /

2366 / 2388

70"

1-1/8" Hex

•Adapter Plate •Stub Adapters 3-5 $2,795.00

Not Typically Necessary

Yoke Change1-1/4" Hex


Stub Shaftor

Yoke Change

Not typically requiered. Call if harnesess do not

match.

700-0272-P Case IH

Platrom / Cutterbar Only 2020 Case IH

All Years1420 / 1440 / 1460 / 1470 / 1480 / 1482

1620 / 1640 / 1644 / 1660 / 1666 / 1670 / 1680 / 1688 / 2144 / 2166 / 2188 / 2344 /

2366 / 2388

70"

1-1/8" Hex

•Adapter Plate •Stub Adapters 3-5 $2,795.00




Stub Shaftor

Yoke Change


match.

700-0279 Case IH

Cornheads Only

Case 2600 & 4400 Series

Case IH

All Years1420 / 1440 / 1460 / 1470 / 1480 / 1482

1620 / 1640 / 1644 / 1660 / 1666 / 1670 / 1680 / 1688 / 2144 / 2166 / 2188 / 2344 /

2366 / 2388

70"

1-1/8" Hex

•Adapter Plate •Stub Adapters

700-0271 & 700-0009 Together 3-5 $2,795.00




Stub Shaftor

Yoke Change


match.

700-0371 Case IH

Cornheads Only

Case 2400 - 3400

Case IH

All Years1420 / 1440 / 1460 / 1470 / 1480 / 1482

1620 / 1640 / 1644 / 1660 / 1666 / 1670 / 1680 / 1688 / 2144 / 2166 / 2188 / 2344 /

2366 / 2388

70"

1-1/8" Hex

•Adapter Plate •Stub Adapters•Relocate TPS

1-2 $3,995.00




Stub Shaftor

Yoke Change


match.

*Prices listed are subject to cahnge without notice. Contact Bish Enterprises for Current Pricing. www. bishenterprise.com**Prices shown are list price and do not reflect any promotional, bulk, or dealer pricing. Contact Bish Enterises for dealer or bulk pricing information.***Bish Enterprises is a privately owned company and is not affiliated with or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®, in any way or form. The terms “Agco”, “Case IH”, “CAT”, “Claas/Lexion”, “Gleaner”, “John Deere” or “Deere & Company”, “Massey”, “New Holland”, or “Shelbourne Reynolds” and any images of Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds® equipment are for descriptive purposes only and in no way infer or imply that any part or accessory sold by Bish Enterprises or advertised on this website is manufactured, sold, or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®.



TYPE OF HEAD

Header Model #

YearSerial #


CombineModel #'s


Type

Conversion Type


Installation Time

(Hours)

HeaderConversion

Components





Needed

Headsisght®Height

Conversion (Sensor)


700-0372 Case IH

Cutter Bar Only 2020 Case IH

All Years1420 / 1440 / 1460 / 1470 / 1480 / 1482

1620 / 1640 / 1644 / 1660 / 1666 / 1670 / 1680 / 1688 / 2144 / 2166 / 2188 / 2344 /

2366 / 2389

70"

1-1/8" Hex


1-3 $3,995.00 Not Typically Necessary

Not Typically Necessary $100 Stub Adapter


match.

700-0375 Case IH

Cornheads Only

2200 & 3200 Series

Case IH

All YearsAFX 7010 / AFX 8010 7120 / 8120 / 9120 / 7230 / 8230 / 9230 / 7240 / 8240 / 9240

85"

6 Spline

•4" Wedge Kit

•Replace Male Half of TPS

4-6$3,950 Not Typically

NecessaryNot Typically Necessary

Male TPS505-3010

Hydraulic Block$300


match.

700-0375 Case IH

Cornheads Only

2200 & 3200 Series

Case IH

All Years5088 / 6088 / 7088 / 5130 / 6130 / 7130 / 5140 / 6140 / 7140

72"

6 Spline

•4" Wedge Kit

•Replace Male Half of TPS

4-6$3,950 Not Typically

NecessaryNot Typically Necessary

Male TPS505-3010

Hydraulic Block$301


match.

Hybrid Frame Kit

Case IH

Cornheads Only

1000 Series Row UnitsAny Year

Case IH

All YearsAFX 7010 / AFX 8010 7120 / 8120 / 9120 / 7230 / 8230 / 9230 / 7240 / 8240 / 9240

85"

6 SplineUpgrade Frame

Transfer all row units and componets to a Bish Built frame that will accomidate the Case 8010 & NH CR

as well as most other machines with additional

adapters

N/A Typically Not Needed

Typically Not Needed


match.

Hybrid Frame Kit

Case IH

Cornheads Only


Case IH

All Years5088 / 6088 / 7088 / 5130 / 6130 / 7130 / 5140 / 6140 / 7140

72"

6 SplineUpgrade Frame



adapters




match.

Hybrid Frame Kit

Case IH

Cornheads Only


New Holland

- to 2013 CR 9220 / 9240 /

9260 / 9270 / 9040 / 9060 / 9070 / 9080 / 9090 / 6.90 / 7.90 /

8.90 / 9.90 CX 720 / 740 / 760 /

780 / 8030 / 8040 / 8050 / 8060 / 8070 / 8080 / 8090 / 820 /

840 / 860 / 880

85"(Must Specify)

6 Spline

Shaved

Upgrade Frame



adapters



Custom Build

Please Call

Lights Only$500

Hybrid Frame Kit

Case IH

Cornheads Only


New Holland

- to 2013 CR 9220 / 9240 /

9260 / 9270 / 9040 / 9060 / 9070 / 9080 / 9090 / 6.90 / 7.90 /

8.90 / 9.90 CX 720 / 740 / 760 /

780 / 8030 / 8040 / 8050 / 8060 / 8070 / 8080 / 8090 / 820 /

840 / 860 / 880

74"(Must Specify)

6 Spline

Shaved

Upgrade Frame



adapters



Custom Build

Please Call

Lights Only$500



TYPE OF HEAD

Header Model #

YearSerial #


CombineModel #'s


Type

Conversion Type


Installation Time

(Hours)

HeaderConversion

Components





Needed

Headsisght®Height

Conversion (Sensor)


Hybrid Frame Kit

Case IH

Cornheads Only


New Holland

- to 2013 CR 9220 / 9240 /

9260 / 9270 / 9040 / 9060 / 9070 / 9080 / 9090 / 6.90 / 7.90 /

8.90 / 9.90 CX 720 / 740 / 760 /

780 / 8030 / 8040 / 8050 / 8060 / 8070 / 8080 / 8090 / 820 /

840 / 860 / 880

85"(Must Specify)

6 Spline

Shaved

Upgrade Frame



adapters



Custom Build

Please Call

Lights Only$500

Hybrid Frame Kit

Case IH

Cornheads Only


New Holland

- to 2013 CR 9220 / 9240 /

9260 / 9270 / 9040 / 9060 / 9070 / 9080 / 9090 / 6.90 / 7.90 /

8.90 / 9.90 CX 720 / 740 / 760 /

780 / 8030 / 8040 / 8050 / 8060 / 8070 / 8080 / 8090 / 820 /

840 / 860 / 880

74"(Must Specify)

6 Spline

Shaved

Upgrade Frame



adapters



Custom Build

Please Call

Lights Only$500

700-0029-CH Case IH

Cornheads Only All Massey

Red Feederhouse

Rotary - 8560 / 8570 / 8590 / 8780

90" 1-1/4" Hex

•Adapter Plate •Convert to TPS

•Tight fit may require a little grinding to adapter plate or to head and /or

fedderhouse.

•If equiped with Smart-Trac, Refer to kit 700-0011-

ST

1-2 $1,295.00

19" Female 1-1/4" Hex 14 Series

31" Male 1-1/8" or 1-1/4" Hex 14

Series

Single Drive:$300

Double Drive$600

Custom Build

Please Call

Lights Only$175

700-0301-O Case IH

22 - 2400 Series All Gleaner

R Series - 40 / 42 / 52 / 62 / 72 / 75 / R5

/ R6 / R7

90"

21 Spline

•Adapter Plate•Convert or

Relocate TPS

•Remove or move gear boxes and replace power

shafts.


ST

3-5 $1,955.00

28" Female 21 Spline 14 / 35 Series on Left

31" Male 1-1/8" or 1/1/4 Hex 14 / 35

Series on Left

19" Female 21 Spline 14 / 35

Series on Right

21" Male 1-1/8" or 1-1/4" Hex 14 / 35

Series on Right

Single Drive:$300

Double Drive$600

Custom Build

Please Call

Lights Only$175

700-0301-C Case IH

22 - 2400 Series All Gleaner

R Series - 40 / 42 / 52 / 62 / 72 / 75 / R5

/ R6 / R7

90"

21 Spline

•Adapter Plate•Convert or

Relocate TPS

•Remove or move gear boxes and replace power

shafts.


ST

3-5 $1,955.00


31" Male 1-1/8" or 1/1/4 Hex 14 / 35

Series on Left


Series on Right

21" Male 1-1/8" or 1-1/4" Hex 14 / 35

Series on Right

Single Drive:$300

Double Drive$600

Custom Build

Please Call

Lights Only$175



TYPE OF HEAD

Header Model #

YearSerial #


CombineModel #'s


Type

Conversion Type


Installation Time

(Hours)

HeaderConversion

Components





Needed

Headsisght®Height

Conversion (Sensor)


700-0030 Case IH

800, 900, 1000 Series

CornheadsCutter BarPlatform

All Gleaner

R Series - 40 / 42 / 52 / 62 / 72 / 75 / R5

/ R6 / R7

90"

21 Spline



ST1-2 $1,000.00

19" Female 21 Spline 14 Series


Single Drive:$300

Double Drive$600

Custom Build

Please Call

Lights Only$175

700-0031 Cornheads Only All Gleaner L / M •Adapter Plate

•Convert to TPS 1-2 $1,150.00



Single Drive:$300

Double Drive$600

Custom Build

Please Call

Lights Only$175

700-0033 Case IH

Cornheads Only All New Holland

Lower DriveTR - 70 / 75 / 76 / 85 / 86 / 87 / 88 / 89 / 96 /

97 / 98 / 99 / 995

72"

6 Spline

•Adapter Plate•Convert to TPS 1-2 $1,295.00



Single Drive:$300

Double Drive$600

Custom Build

Please Call

Lights Only$500

700-0036 Case

Corn Heads Only

2200 -24003200-3400

SeriesCAT Lexion

All Years

405-780

Narrow Body

70" 21 Spline

•Cut & Weld Kit•Convert or

Relocate TPS

Requires parts from 3 adapters ( 700 - 0270 + 700-0008 + 700-0036)

3$2,995


31" Male 1-1/8" or 1/1/4 Hex 14 / 35

Series on Left


Series on Right

21" Male 1-1/8" or 1-1/4" Hex 14 / 35

Series on Right

Single Drive:$300

Double Drive$600

Hydraulic Block

$3,750

Custom Build

Please Call

Lights Only$175

700-0037 Case

Corn Heads Only

2200 -2400 Series

CAT Lexion

All Years

405-780

Wide Body

80"21 Spline


Relocate TPS

Requires parts from 3 adapters ( 700 - 0270 + 700-0008 + 700-0036)

4$2,995


31" Male 1-1/8" or 1/1/4 Hex 14 / 35

Series on Left


Series on Right

21" Male 1-1/8" or 1-1/4" Hex 14 / 35

Series on Right

Single Drive:$300

Double Drive$600

Hydraulic Block

$3,750

Custom Build

Please Call

Lights Only$175



TYPE OF HEAD

Header Model #

YearSerial #


CombineModel #'s


Type

Conversion Type


Installation Time

(Hours)

HeaderConversion

Components





Needed

Headsisght®Height

Conversion (Sensor)


700-0007-N john deere Corn Head40 or 90 Series

8r 30" and Smaller

case

All YearsAFX 7010 / AFX 8010 7120 / 8120 / 9120 / 9130 / 7230 / 8230 / 9230 / 7240 / 8240 /

9240

85"

6 Spline

•Cut & Weld Kit•Relocate TPS•2" Wedge Kit

Add Stripper Extensions For 5088 - 5130-6130

Models4-6 $1,375

1x 19" Female 6 Spline 14 Series

1x 28.75" Female 6 Spline 14 Series

2x 30.38" Male 1-1/8" Hex 14 Series

Single Drive:$300

Double Drive$600

Stripper Extentions$100

Hydraulic Block$300

$1815

Lights Only$175

700-0007-N john deere Corn Head40 or 90 Series

8r 30" and Smaller

case

All Years5088 / 6088 / 7088 / 5130 / 6130 / 7130 / 5140 / 6140 / 7140

72"

6 Spline


Add Stripper Extensions For 5088 - 5130-6130

Models4-6 $1,375


1x 28.75" Female 6 Spline 14 Series


Single Drive:$300

Double Drive$600


Hydraulic Block$300

$1815

Lights Only$175

700-0007-W john deere Corn Head40 or 90 Series

12r 20" and Larger

case

All YearsAFX 7010 / AFX 8010 7120 / 8120 / 9120 / 7230 / 8230 / 9230 / 7240 / 8240 / 9240

85"

6 Spline


•Add Stripper Extensions For Xx88 - 5130-6130

Models6-8 $1,995


31" Male 1-1/8" Hex Male 35

Series

Single Drive:$300

Double Drive$600


Hydraulic Block$300

$1815

Lights Only$175

700-0007-W john deere Corn Head40 or 90 Series

12r 20" and Larger

case

All Years5088 / 6088 / 7088 / 5130 / 6130 / 7130 / 5140 / 6140 / 7140

72"

6 Spline


Add Stripper Extensions For Xx88 - 5130-6130

Models6-8 $1,995



Series

Single Drive:$300

Double Drive$600


Hydraulic Block$300

$1815

Lights Only$175

700-0007-P-IH

john deere Platform 200 or 900 Series

case

All YearsAFX 7010 / AFX 8010 7120 / 8120 / 9120 / 7230 / 8230 / 9230 / 7240 / 8240 / 9240

85"

6 Spline


Add Stripper Extensions For 20-40-60 Models 4-6 $1,675




Single Drive:$300

Double Drive$600


Hydraulic Block$300

900F series$250

200 Series$900

700-0007-P-IH

john deere Platform 200 or 900 Series

case

All Years5088 / 6088 / 7088 / 5130 / 6130 / 7130 / 5140 / 6140 / 7140

72"

6 Spline


Add Stripper Extensions For 20-40-60 Models 4-6 $1,675




Single Drive:$300

Double Drive$600


Hydraulic Block$300

900F series$250

200 Series$900

700-0007-6C-IH-E

john deere

Corn Head

600 SERIES

Serial # -745100

case

All YearsAFX 7010 / AFX 8010 7120 / 8120 / 9120 / 7230 / 8230 / 9230 / 7240 / 8240 / 9240

85"

6 Spline


•On Heads With Split Augers The Feederhouse Front Channel Has To Be Knotched 1/2" Down And

24" Wide

•5088-6230 Need To Add Stripper Extensions

6-8 $3,695



Series or 48" Male 1-1/8" Hex Male 35

Series

Single Drive:$325

Double Drive$650

Replacement Feederhouse

Guides$250


Hydraulic Block$300

$1815

Lights Only$175



TYPE OF HEAD

Header Model #

YearSerial #


CombineModel #'s


Type

Conversion Type


Installation Time

(Hours)

HeaderConversion

Components





Needed

Headsisght®Height

Conversion (Sensor)


700-0007-6C-IH-E

john deere Corn Head

600 SERIES

Serial # -745100

case

All Years5088 / 6088 / 7088 / 5130 / 6130 / 7130 / 5140 / 6140 / 7140

85"

6 Spline



24" Wide


6-9 $3,695




Series

Single Drive:$325

Double Drive$650


Guides$250


Hydraulic Block$300

$1815

Lights Only$175

700-0007-6C-IH-L


600 SERIES

Serial #745101 -

case

All YearsAFX 7010 / AFX 8010 7120 / 8120 / 9120 / 7230 / 8230 / 9230 / 7240 / 8240 / 9240

72"

6 Spline



24" Wide


6-8 $3,695


Yoke ChangeAW36 6 Spline



Guides$250


Hydraulic Block$300

$1815

Lights Only$175

700-0007-6C-IH-L


600 SERIES

Serial # 745101 -

case

All Years5088 / 6088 / 7088 / 5130 / 6130 / 7130 / 5140 / 6140 / 7140

72"

6 Spline



24" Wide


6-8 $3,695


Yoke ChangeAW36 6 Spline



Guides$250


Hydraulic Block$300

$1815

Lights Only$175

700-0007-6P-IH-4-30

john deere

HyrdaflexPlatform

RigidPlatform

600 SERIES

30 Ft or less case

All YearsAFX 7010 / AFX 8010 7120 / 8120 / 9120 / 7230 / 8230 / 9230 / 7240 / 8240 / 9240

85"

6 Spline



•Single P.T.O. Drive6-8 $3,950




Series

Single Drive:$325


Hydraulic Block$350

$2810

Lights Only$500

700-0007-6P-IH-4-30

john deere

HyrdaflexPlatform

RigidPlatform

600 SERIES

30 Ft or less case

All Years5088 / 6088 / 7088 / 5130 / 6130 / 7130 / 5140 / 6140 / 7140

85"

6 Spline



•Single P.T.O. Drive6-8 $3,950




Series

Single Drive:$325


Hydraulic Block$350

$2810

Lights Only$500

700-0007-6P-IH-4-35

john deere

HyrdaflexPlatform

RigidPlatform

600 SERIES

35 Ft or more case

All YearsAFX 7010 / AFX 8010 7120 / 8120 / 9120 / 7230 / 8230 / 9230 / 7240 / 8240 / 9240

72"

6 Spline



•Single P.T.O. Drive6-8 $3,950 Yoke Change

6 Spline Not Typically Necessary


Hydraulic Block$350

$2810

Lights Only$500

700-0007-6P-IH-4-35

john deere

HyrdaflexPlatform

RigidPlatform

600 SERIES

35 Ft or more case

All Years5088 / 6088 / 7088 / 5130 / 6130 / 7130 / 5140 / 6140 / 7140

72"

6 Spline



•Single P.T.O. Drive6-8 $3,950 Yoke Change

6 Spline Not Typically Necessary


Hydraulic Block$350

$2810

Lights Only$500



TYPE OF HEAD

Header Model #

YearSerial #


CombineModel #'s


Type

Conversion Type


Installation Time

(Hours)

HeaderConversion

Components





Needed

Headsisght®Height

Conversion (Sensor)


700-0009 john deere

Corn HeadRow Head All case

All Years1420 / 1440 / 1460 / 1470 / 1480 / 1482

1620 / 1640 / 1644 / 1660 / 1666 / 1670 / 1680 / 1688 / 2144 / 2166 / 2188 / 2344 /

2366 / 2388

70"

1-1/8" Hex

•Adapter Plate•Convert to TPS

Cut Backshafts, Install Bearing Kit For Tps (Slip

Clutch Add-On - Cutterbars + $85 Per Side)

3 $1,250

19" Female 1-1/8" Hex 14 / 35 Series

30.38" Male 1-1/8" Hex 14 / 35 Series

Single Drive:$300

Double Drive$600

Hydraulic Block$300

$1815

Lights Only$175

700-0009-P john deere

Cutter BarPlatform All case

All Years1420 / 1440 / 1460 / 1470 / 1480 / 1482

1620 / 1640 / 1644 / 1660 / 1666 / 1670 / 1680 / 1688 / 2144 / 2166 / 2188 / 2344 /

2366 / 2388

70"

1-1/8" Hex


•Install Slip Clutch



3 $1,250


30.38" Male 1-1/8" Hex 14 / 35 Series

Single Drive:$300

Double Drive$600

$100 Slip Clutch Repo

Hydraulic Block$350

Multiple Options

700-0009-P-35

john deere

Cutter BarPlatform

35 Ft or more

All case

All Years1420 / 1440 / 1460 / 1470 / 1480 / 1482

1620 / 1640 / 1644 / 1660 / 1666 / 1670 / 1680 / 1688 / 2144 / 2166 / 2188 / 2344 /

2366 / 2388

70"

1-1/8" Hex


•Install Slip Clutch



3 $1,250 Yoke Change1-1/8" Hex



Hydraulic Block$350

Multiple Options

700-0009-6D john deere Ridgid Draper 600 Series case

All Years1420 / 1440 / 1460 / 1470 / 1480 / 1482

1620 / 1640 / 1644 / 1660 / 1666 / 1670 / 1680 / 1688 / 2144 / 2166 / 2188 / 2344 /

2366 / 2388

70"

1-1/8" Hex

•Adapter Plate•Shaft Change



3 $1,500


30.38" Male 1-1/8" Hex 14 / 35 Series

Single DriveShaft Only


Hydraulic Block$350

Custom Build

Please Call

Lights Only$175

700-0037 New Holland

Lower Drive Heads Only

Case IH

All Years1420 / 1440 / 1460 / 1470 / 1480 / 1482

1620 / 1640 / 1644 / 1660 / 1666 / 1670 / 1680 / 1688 / 2144 / 2166 / 2188 / 2344 /

2366 / 2388

70"

1-1/8" Hex


Relocate TPS

Trim vertical guides on rear of feederhouse. 1-2 $1,295.00

19" Female 1-1/8" Hex 14 Series


Single Drive:$300

Double Drive$600

Stub Adapter$100

Custom Build

Please Call

Lights Only$175


Corn Head Only 996 Case IH

All YearsAFX 7010 / AFX 8010 7120 / 8120 / 9120 / 7230 / 8230 / 9230 / 7240 / 8240 / 9240

85"

6 Spline

•Cut & Weld Kit•Relocate TPS

Complete feederhouse modification required - See

website for information4-6 $1,500.00 Typically Not

NecesarryTypically Not Necesarry

Custom Build

Please Call

Lights Only$175


Corn Head Only 996 Case IH

All Years5088 / 6088 / 7088 / 5130 / 6130 / 7130 / 5140 / 6140 / 7140

72"

6 Spline

•Cut & Weld Kit•Relocate TPS

Complete feederhouse modification required - See

website for information4-6 $1,500.00 Typically Not


Custom Build

Please Call

Lights Only$175


Cornheads Only 99C & 980CR Case IH

All Years1420 / 1440 / 1460 / 1470 / 1480 / 1482

1620 / 1640 / 1644 / 1660 / 1666 / 1670 / 1680 / 1688 / 2144 / 2166 / 2188 / 2344 /

2366 / 2388

70"

1-1/8" Hex

•Adapter Plate •Stub Adapters 3-5 $2,795.00 Yoke Change

1-1/8" Hex

Yoke Change or

$100 Stub Adapter

Custom Build

Please Call

Lights Only$175



TYPE OF HEAD

Header Model #

YearSerial #


CombineModel #'s


Type

Conversion Type


Installation Time

(Hours)

HeaderConversion

Components





Needed

Headsisght®Height

Conversion (Sensor)



Cornheads

Platform 98C - 74C Case IH

All Years1420 / 1440 / 1460 / 1470 / 1480 / 1482

1620 / 1640 / 1644 / 1660 / 1666 / 1670 / 1680 / 1688 / 2144 / 2166 / 2188 / 2344 /

2366 / 2388

70"

1-1/8" Hex


1-2 $3,995.00




Stub Shaftor

Yoke Change

Custom Build

Please Call

Lights Only$175

750-5010 Gleaner Stripper Head 6000 Case 801072"

6 Spline

•Adapter Plate •Change Yoke

Remove all Gleaner componets from feeder house & bolt in adapter -

you will also have a bolt on yoke, hyd block, & hose needed for conversion

2-3$3,105 Yoke Change

6 Spline

Typically Not Necesarry

Yoke Changes

Hydraulic Block$350

Custom Build

Please Call

Lights Only$175

750-5069 Gleaner Stripper Head 6000 Case XX8872"

6 Spline•Adapter Plate

Remove all Gleaner componets from

feederhouse & bolt in Bish asapter + 700-0009

3-4$3,105 Yoke Change

6 Spline


Yoke Changes

Hydraulic Block$350

Custom Build

Please Call

Lights Only$175

700-9250IH Gleaner

Dyna-Flex Draper 9250 Case

All YearsAFX 7010 / AFX 8010 7120 / 8120 / 9120 / 7230 / 8230 / 9230 / 7240 / 8240 / 9240

85"

6 Spline


Remove factory plate & bolt in Bish adapter along

with electrical5-6

$3,500 Typically Not Necesarry


Single Yoke Change

Electrical Kit Needed

Hydraulic Block $350

$3820

700-9250IH Gleaner


All Years5088 / 6088 / 7088 / 5130 / 6130 / 7130 / 5140 / 6140 / 7140

72"

6 Spline



with electrical5-6 $3,500 Typically Not


Single Yoke Change

Electrical Kit Needed

Hydraulic Block $350

$3820

700-0048 Massey Corn Head Case

All Years1420 / 1440 / 1460 / 1470 / 1480 / 1482

1620 / 1640 / 1644 / 1660 / 1666 / 1670 / 1680 / 1688 / 2144 / 2166 / 2188 / 2344 /

2366 / 2388

70"

1-1/8" Hex


•Cut top shat

• Install TPS1-2 $1,295.00 Please Call To

InquirePlease Call To

Inquire

Custom Build

Please Call

Lights Only$175

700-0048 Massey Cutter Bar Case

All Years1420 / 1440 / 1460 / 1470 / 1480 / 1482

1620 / 1640 / 1644 / 1660 / 1666 / 1670 / 1680 / 1688 / 2144 / 2166 / 2188 / 2344 /

2366 / 2388

70"

1-1/8" Hex


•Cut top shat

• Install TPS1-2 $1,295.00 Please Call To


Inquire

Custom Build

Please Call

Lights Only$175

700-9250IH Massey


All YearsAFX 7010 / AFX 8010 7120 / 8120 / 9120 / 7230 / 8230 / 9230 / 7240 / 8240 / 9240

85"

6 Spline


Remove factory plate & bolt in Bish asapter along



Single Yoke Change

Electricl Kit Needed

Hydraulic Block Available

$350

$2830



TYPE OF HEAD

Header Model #

YearSerial #


CombineModel #'s


Type

Conversion Type


Installation Time

(Hours)

HeaderConversion

Components





Needed

Headsisght®Height

Conversion (Sensor)


700-9250IH Massey


All Years5088 / 6088 / 7088 / 5130 / 6130 / 7130 / 5140 / 6140 / 7140

72"

6 Spline


Remove factory plate & bolt in Bish asapter along



Single Yoke Change

Electricl Kit Needed

Hydraulic Block Available

$350

$2830

HA-90 CAT Corn Head Case

2388 / 2577 (2003 +) Level Land

Feederhouse Only

All Years1420 / 1440 / 1460 / 1470 / 1480 / 1482

1620 / 1640 / 1644 / 1660 / 1666 / 1670 / 1680 / 1688 / 2144 / 2166 / 2188 / 2344 /

2366 / 2388

70"

1-1/8" Hex

•Adapter Plate •Relocate Tps Shafts ( No kit

available )1-2 $1,395 Typically Not


Stub Adapter$100

Custom Build

Please Call

Lights Only$175

HA-60-9 challenger Corn Head Case

2389 / 2577 (2003 +) Level Land

Feederhouse Only

All Years1420 / 1440 / 1460 / 1470 / 1480 / 1482

1620 / 1640 / 1644 / 1660 / 1666 / 1670 / 1680 / 1688 / 2144 / 2166 / 2188 / 2344 /

2366 / 2389

70"

1-1/8" HexHA-60 + HA-09 1 $2,500 Please Call To


InquireStub Adapter

$100

Custom Build

Please Call

Lights Only$175

700-1359 shelbourne Stripper Head

XCV- All Models

CVS- All Models

case

All YearsAFX 7010 / AFX 8010 7120 / 8120 / 9120 / 7230 / 8230 / 9230 / 7240 / 8240 / 9240

85"

6 Spline

•Adapter Plate •Change Yolk


with electrical2 $1,850 Possible Yoke

ChangeNot Typically Necessary

Stub Adapter$100

$455 W/O Sensors

$4690With Sensors

700-1359 shelbourne Stripper Head

XCV- All Models

CVS- All Models

case

All Years5088 / 6088 / 7088 / 5130 / 6130 / 7130 / 5140 / 6140 / 7140

72"

6 Spline

•Adapter Plate •Change Yolk


with electrical2 $1,850 Possible Yoke

ChangeNot Typically Necessary

Stub Adapter$100

$455 W/O Sensors

$4690With Sensors

1 | P a g e 2 0 1 6

Prices listed are subject to change without notice. Contact Bish Enterprises for Current Pricing. www.bishenterprise.com Prices shown are list price and do not reflect any promotional, bulk, or dealer pricing. Contact Bish Enterprises for dealer or bulk pricing information.

508 South D Road - Giltner, NE 68841 61021380 (402) 849-2674 Office - www.bishenterprise.com - [email protected]

Bish Enterprises is a privately owned company and is not affiliated with or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®, in any way or form. The terms “Agco”, “Case IH”, “CAT”, “Claas/Lexion”, “Gleaner”, “John Deere” or “Deere & Company”, “Massey”, “New Holland”, or “Shelbourne Reynolds” and any images of Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds® equipment are for descriptive purposes only and in no way infer or imply that any part or accessory sold by Bish Enterprises or advertised on this website is manufactured, sold, or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®.

Part # Item Price

Including Shafts

500-0100 IHC 843, 844, 853, 943, 944, 953, 1043, 1044 Field Tracker

Field Tracker Conversion - Single Drive $750.00 30" TPS

500-0102 IHC 854, 863, 864, 883, 963, 1063 Field Tracker

Field Tracker Conversion - Double Drive $1500.00 30" TPS

500-0103 IHC 854, 863, 954, 963, 1063, 1054 Field Tracker


500-0106 IHC 954, 963, 1063, 1054 Field Tracker

Field Tracker Conversion - Single Drive - End Panel Kit $750.00 30" TPS

500-0108 IHC 964, 984, 1064, 1084 Field Tracker Field Tracker Conversion - Double Drive

$1500.00 30" TPS

500-0110 IHC 983, 1083 Field Tracker

Field Tracker Conversion - Double Drive (Current Model) $1500.00 30" TPS


Field Tracker Conversion - Double Drive (Prior Model) $1500.00 30" TPS



500-0116 IHC 800 Series Platform/Cutter Bar

Field Tracker Conversion - Single Drive $750.00 30" TPS

mailto:[email protected]

1 | P a g e 2 0 1 6




Part # Item Price

Complete Telescoping Power Shafts (Complete Male and Female Shaft with Yoke)

505-XXXX 14 Series Single T.P.S ( 18" - 31") $300.00








505-XXXX AW36 Series Single T.P.S ( 31" - 40") $550.00

505-XXXX AW36 Series Single T.P.S ( 41" - 60") $750.00

505-6002 F 505-6003 M John Deere® Contour Master Shafts $400.00

505-6002-R F 505-6003-R M John Deere® Contour Master Shafts (Refurbished) $300.00

505-6010-R F 505-6011-F M OEM Case® Drive-line For Case Field Tracker (Refurbished) $600.00

505-3010 Case® Drive-line for 700-0270 & 700-0375 Kit $500.00

Yokes & Cross Kits 506-1014 14 Series Cross Kit $35.00

506-XXXX 14 Series Replacement Yoke $75.00

506-1035 35 Series Cross Kit $37.50

506-XXXX 35 Series Replacement Yoke $85.00

506-1044 44 Series Cross Kit $47.50

506-XXXX 44 Series Yoke $90.00

506-1135 AW-35 Cross Kit $37.50

506-XXXX AW-35 Yoke $85.00

506-1236 AW-36 Cross Kit $47.50


1 | P a g e 2 0 1 6




Part # Item Price

Stub Adapter

507-1001 1-1/2" Hex Female x 1-1/4" Hex Male $85.00

507-1004 1-1/2" Round Female x 1-1/8" Hex Male $85.00



507-1013 1-1/8" Hex Female to 1-3/8" 6 Spline Male $85.00


507-1019 1-1/8" Hex Female x 1-3/8" 21 Spline Male $85.00

507-1022 1-1/8" Hex Male x 1-1/8" Hex Male $85.00

507-1025 1-3/8" 21 Spline Female x 1-1/4" Hex Male $85.00


507-1031 1-3/8" 21 Spline Female x 6 Spline Male $85.00

507-1034 1-3/8" 21 Spline QT Female x 1-1/8" Hex Male $85.00


507-1040 1-3/8" 6 Spline Female x 1-3/8" 21 Spline Male $85.00

Part # Item Price

Repositioning Adapters 507-1101 1-1/8" Hex x 10" $85.00

507-1104 1-1/8" Hex x 4" $85.00

507-1107 1-3/8" 21 Spline x 3 1/2" Turned $85.00

507-1110 1-3/8" 21 Spline x 4" $85.00

507-1113 1-3/8" 6 Spline x 3 1/2" Turned $85.00

507-1116 1-3/8" 6 Spline x 4" $85.00

507-1119 4 Bolt Round Hub $85.00

507-1122 Tapered Hub $85.00


2 | P a g e 2 0 1 6




Part # Item Price

Couplers 507-1201 1" Hex Coupler (with Set Screws) $65.00

507-1204 1-1/8 Hex Coupler (with Set Screws) $65.00




507-1216 Pipe Sleeve for 1-1/4" Shaft (Weld On) $30.00

Part # Item Price

Short Hex Shafts Threaded 1" Hex Shafting (Per foot) 3+ ft. $18.00

Threaded 1-1/8" Hex Shafting (Per foot) 3+ ft. $18.75



503-4001 6-1/4" Hex Shaft - Non-Threaded (Bolt-on Collar) $65.00

503-4005 8-3/4" Hex Shaft - Threaded (with Lock Collar) $100.00

503-4002 8" Hex Shaft - Non-Threaded (Bolt-on Collar) $100.00

503-4004 8" Hex Shaft - Threaded (with Lock Collar) $100.00


503-4003 10" Hex Shaft - Non-Threaded (Bolt-on Collar) $100.00



case ih header adapters - bish enterprises ih header adapters: the complete solution ... hydraulic...

Documents