cat® / claas® / lexion® header adapters
TRANSCRIPT
508 South D Road - Giltner, NE 68841 61028080
(402) 849-2674 - www.bishenterprise.com - [email protected]
Bish Enterprises is a privately owned company and is not affiliated with or endorsed by CAT®/Claas®/Lexion®, in any way or form. The terms “CAT” or “Claas” or “Lexion”, and any images of CAT®/Claas®/Lexion® equipment are for descriptive purposes only and in no way infer or imply that any part or accessory sold by Bish Enterprises or advertised on this website is manufactured, sold, or endorsed by CAT®/Claas®/Lexion®.
• Highest Quality Adapters on the Market, withComplete Solutions Available!
• Large Knowledge Base, We’ve Been BuildingAdapters Since 1976!
• Improve your Performance in Some Situations.
• Quality Conversions, Both Functionally andCosmetically.
CAT® / Claas® / Lexion® Header Adapters:
Complete Solutions o We Stock the Adapter(s), Upright Kit(s), Telescoping Power Shaft(s), and Electrical Conversion(s)
CAT®/Claas®/Lexion® Row Units can be Adapted to Fit Almost Any Combine! o We Offer a Frame Kit for CAT®/Claas®/Lexion® Row Units to work with:
CAT® Challenger® Case IH® Gleaner® John Deere® New Holland®
Massey Ferguson® Oxbo® New Models Being Researched Others Can Be Custom Built
CAT®/Claas®/Lexion® Combines can be Adapted to Fit Almost Any Header! o We Offer Kits for CAT®/Claas®/Lexion® Combines to:
Case IH® Gleaner® Honey Bee® John Deere®
New Holland® Massey Ferguson® New Models Being Researched Others Can Be Custom Built
PART # Header Manufacturer
TYPE OF HEAD
Header Model #
YearSerial #
Combine Manufacturer
CombineYear
Model #'s
Feederhouse Shaft Length / Shaft Type
Conversion Type
Additional Information
Installation Time
(Hours)
HeaderConversion
Components
TelescopicPower Shafts
Contact Bish Enterprises For Pricing (Series
Options Vary)
Bearing Support Kit (No T.P.S.)
Hydraulic Components
Needed
Headsight®Height
Conversion (Sensor)
Accessory Components
700-0090 CAT Corn Head Case
2388 / 2577 (2003 +) Level Land and Field
Tracker
All Years1420 / 1440 / 1460 / 1470 / 1480 / 1482
1620 / 1640 / 1644 / 1660 / 1666 / 1670 / 1680 / 1688 / 2144 / 2166 / 2188 / 2344 /
2366 / 2388
70"
1-1/8" Hex
•Adapter Plate •Relocate TPS Shafts ( No kit
available )1-2 $1,795
Yoke Change or Stub Shaft
Adapter
Not Typically Necessary
Not Typically Necessary
Custom Build
Please Call
Not Typically Necessary
700-0060 Challenger Corn Head 3000 Series John Deere
All Years9400 - S Series /
Level Land
83.69"
21 Spline(Must Specify)
•Adapter Plate •Convert to TPS
Remove all Gleaner components from
feederhouse & bolt in John Deere adapter
Early Contour Master will require torch work on head
for clearance. Does not require hyd block since these move with electric
actuator
2-3 $1,795 Please Inquire Not Typically Necessary
Not Typically Necessary
Custom Build
Please Call
Not Typically Necessary
700-0060-9 challenger Corn Head Case
2388 / 2577 (2003 +) Level Land and Field
Tracker
All Years1420 / 1440 / 1460 / 1470 / 1480 / 1482
1620 / 1640 / 1644 / 1660 / 1666 / 1670 / 1680 / 1688 / 2144 / 2166 / 2188 / 2344 /
2366 / 2389
70"
1-1/8" HexHA-60 + HA-09 1 $2,695
Yoke Change or Stub Shaft
Adapter
Not Typically Necessary
Not Typically Necessary
Custom Build
Please Call
Not Typically Necessary
700-0008-N john Deere
Corn HeadRow Head
40, 50A, or 90 Series
Top Cap on Center Frame
Lexion
All Years
560 / 570 / 575 / 580 / 585 / 730 / 730P / 740 / 740tt / 750 / 750tt /
7400 / 7400tt / 7500 / 7500tt
Narrow Body
70" 21 Spline
•Cut & Weld Kit•Relocate TPS•2" Wedge Kit
Will Need the Dimensions of the Top Bar
Yokes need to be shaved for clearance on
feederhouse shaft
7-10 $2,995
1x 28" Female 21 Spline PB Shaved 35 Series On Left
Side
1x 28" Female 21 Spline AL 35
Series On Right Side
2x 31" Male 1-1/8" Hex 35 Series
500-0210 - $450500-0212 - $450500-0214 - $450
Please Inquire Please Inquire N/A
700-0008-N john Deere
Corn HeadRow Head
40, 50A, or 90 Series
Top Cap on Center Frame
Lexion
All Years
590 / 595 / 760 / 760tt / 780 / 780tt / 8600 /
8600tt / 8700 / 8700tt / 8800 / 8800tt
Wide Body
80"21 Spline
•Cut & Weld Kit•Relocate TPS•2" Wedge Kit
Will Need the Dimensions of the Top Bar
Yokes need to be shaved for clearance on
feederhouse shaft
7-10 $2,995
1x 28" Female 21 Spline PB Shaved 35 Series On Left
Side
1x 28" Female 21 Spline AL 35
Series On Right Side
2x 31" Male 1-1/8" Hex 35 Series
500-0210 - $450500-0212 - $450500-0214 - $450
Please Inquire Please Inquire N/A
700-0008-N john Deere
Corn HeadRow Head 40, 50A, or 90
SeriesLexion
All Years
560 / 570 / 575 / 580 / 585 / 730 / 730P / 740 / 740tt / 750 / 750tt /
7400 / 7400tt / 7500 / 7500tt
Narrow Body
70" 21 Spline
•Cut & Weld Kit•Relocate TPS•2" Wedge Kit
Will Need the Dimensions of the Top Bar
Yokes need to be shaved for clearance on
feederhouse shaft
7-10 $2,995
1x 28" Female 21 Spline PB Shaved 35 Series On Left
Side
1x 28" Female 21 Spline AL 35
Series On Right Side
2x 31" Male 1-1/8" Hex 35 Series
500-0210 - $450500-0212 - $450500-0214 - $450
Please Inquire Please Inquire N/A
*Prices listed are subject to change without notice. Contact Bish Enterprises for Current Pricing. www. bishenterprise.com**Prices shown are list price and do not reflect any promotional, bulk, or dealer pricing. Contact Bish Enterprises for dealer or bulk pricing information.***Bish Enterprises is a privately owned company and is not affiliated with or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®, in any way or form. The terms “Agco”, “Case IH”, “CAT”, “Claas/Lexion”, “Gleaner”, “John Deere” or “Deere & Company”, “Massey”, “New Holland”, or “Shelbourne Reynolds” and any images of Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds® equipment are for descriptive purposes only and in no way infer or imply that any part or accessory sold by Bish Enterprises or advertised on this website is manufactured, sold, or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®.
CAT Header Conversion Combinations
PART # Header Manufacturer
TYPE OF HEAD
Header Model #
YearSerial #
Combine Manufacturer
CombineYear
Model #'s
Feederhouse Shaft Length / Shaft Type
Conversion Type
Additional Information
Installation Time
(Hours)
HeaderConversion
Components
TelescopicPower Shafts
Contact Bish Enterprises For Pricing (Series
Options Vary)
Bearing Support Kit (No T.P.S.)
Hydraulic Components
Needed
Headsight®Height
Conversion (Sensor)
Accessory Components
*Prices listed are subject to change without notice. Contact Bish Enterprises for Current Pricing. www. bishenterprise.com**Prices shown are list price and do not reflect any promotional, bulk, or dealer pricing. Contact Bish Enterprises for dealer or bulk pricing information.***Bish Enterprises is a privately owned company and is not affiliated with or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®, in any way or form. The terms “Agco”, “Case IH”, “CAT”, “Claas/Lexion”, “Gleaner”, “John Deere” or “Deere & Company”, “Massey”, “New Holland”, or “Shelbourne Reynolds” and any images of Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds® equipment are for descriptive purposes only and in no way infer or imply that any part or accessory sold by Bish Enterprises or advertised on this website is manufactured, sold, or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®.
CAT Header Conversion Combinations
700-0008-N john Deere
Corn HeadRow Head 40, 50A, or 90
SeriesLexion
All Years
590 / 595 / 760 / 760tt / 780 / 780tt / 8600 /
8600tt / 8700 / 8700tt / 8800 / 8800tt
Wide Body
80"21 Spline
•Cut & Weld Kit•Relocate TPS•2" Wedge Kit
Will Need the Dimensions of the Top Bar
Yokes need to be shaved for clearance on
feederhouse shaft
7-10 $2,995
1x 28" Female 21 Spline PB Shaved 35 Series On Left
Side
1x 28" Female 21 Spline AL 35
Series On Right Side
2x 31" Male 1-1/8" Hex 35 Series
500-0210 - $450500-0212 - $450500-0214 - $450
Please Inquire Please Inquire N/A
700-0008-W john Deere
Corn HeadRow Head
40, 50A, or 90 Series
Top Cap on Center Frame
Lexion
All Years
560 / 570 / 575 / 580 / 585 / 730 / 730P / 740 / 740tt / 750 / 750tt /
7400 / 7400tt / 7500 / 7500tt
Narrow Body
70" 21 Spline
•Cut & Weld Kit•Relocate TPS•2" Wedge Kit
Will Need the Dimensions of the Top Bar
Yokes need to be shaved for clearance on
feederhouse shaft
7-10 $2,995
1x 28" Female 21 Spline PB Shaved 35 Series On Left
Side
1x 28" Female 21 Spline AL 35
Series On Right Side
2x 31" Male 1-1/8" Hex 35 Series
500-0210 - $450500-0212 - $450500-0214 - $450
Please Inquire Please Inquire N/A
700-0008-W john Deere
Corn HeadRow Head
40, 50A, or 90 Series
Top Cap on Center Frame
Lexion
All Years
590 / 595 / 760 / 760tt / 780 / 780tt / 8600 /
8600tt / 8700 / 8700tt / 8800 / 8800tt
Wide Body
80"21 Spline
•Cut & Weld Kit•Relocate TPS•2" Wedge Kit
Will Need the Dimensions of the Top Bar
Yokes need to be shaved for clearance on
feederhouse shaft
7-10 $2,995
1x 28" Female 21 Spline PB Shaved 35 Series On Left
Side
1x 28" Female 21 Spline AL 35
Series On Right Side
2x 31" Male 1-1/8" Hex 35 Series
500-0210 - $450500-0212 - $450500-0214 - $450
Please Inquire Please Inquire N/A
700-0008-W john Deere
Corn HeadRow Head 40, 50A, or 90
SeriesLexion
All Years
560 / 570 / 575 / 580 / 585 / 730 / 730P / 740 / 740tt / 750 / 750tt /
7400 / 7400tt / 7500 / 7500tt
Narrow Body
70" 21 Spline
•Cut & Weld Kit•Relocate TPS•2" Wedge Kit
Will Need the Dimensions of the Top Bar
Yokes need to be shaved for clearance on
feederhouse shaft
7-10 $2,995
1x 28" Female 21 Spline PB Shaved 35 Series On Left
Side
1x 28" Female 21 Spline AL 35
Series On Right Side
2x 31" Male 1-1/8" Hex 35 Series
500-0210 - $450500-0212 - $450500-0214 - $450
Please Inquire Please Inquire N/A
700-0008-W john Deere
Corn HeadRow Head 40, 50A, or 90
SeriesLexion
All Years
590 / 595 / 760 / 760tt / 780 / 780tt / 8600 /
8600tt / 8700 / 8700tt / 8800 / 8800tt
Wide Body
80"21 Spline
•Cut & Weld Kit•Relocate TPS•2" Wedge Kit
Will Need the Dimensions of the Top Bar
Yokes need to be shaved for clearance on
feederhouse shaft
7-10 $2,995
1x 28" Female 21 Spline PB Shaved 35 Series On Left
Side
1x 28" Female 21 Spline AL 35
Series On Right Side
2x 31" Male 1-1/8" Hex 35 Series
500-0210 - $450500-0212 - $450500-0214 - $450
Please Inquire Please Inquire N/A
PART # Header Manufacturer
TYPE OF HEAD
Header Model #
YearSerial #
Combine Manufacturer
CombineYear
Model #'s
Feederhouse Shaft Length / Shaft Type
Conversion Type
Additional Information
Installation Time
(Hours)
HeaderConversion
Components
TelescopicPower Shafts
Contact Bish Enterprises For Pricing (Series
Options Vary)
Bearing Support Kit (No T.P.S.)
Hydraulic Components
Needed
Headsight®Height
Conversion (Sensor)
Accessory Components
*Prices listed are subject to change without notice. Contact Bish Enterprises for Current Pricing. www. bishenterprise.com**Prices shown are list price and do not reflect any promotional, bulk, or dealer pricing. Contact Bish Enterprises for dealer or bulk pricing information.***Bish Enterprises is a privately owned company and is not affiliated with or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®, in any way or form. The terms “Agco”, “Case IH”, “CAT”, “Claas/Lexion”, “Gleaner”, “John Deere” or “Deere & Company”, “Massey”, “New Holland”, or “Shelbourne Reynolds” and any images of Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds® equipment are for descriptive purposes only and in no way infer or imply that any part or accessory sold by Bish Enterprises or advertised on this website is manufactured, sold, or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®.
CAT Header Conversion Combinations
700-0008-1N john Deere
Corn HeadRow Head
40, 50A, or 90 Series
Lexion
All Years
560 / 570 / 575 / 580 / 585 / 730 / 730P / 740 / 740tt / 750 / 750tt /
7400 / 7400tt / 7500 / 7500tt
Narrow Body
70" 21 Spline
Faceplate Adapter
Yokes need to be shaved for clearance on
feederhouse shaft2-4 Please Inquire
2x 26" Female 21 Spline 14 Series
2x 28" Male 1-1/8" Hex 14 Series
500-0208 - $450500-0210 - $450500-0212 - $450500-0214 - $450
Please Inquire Please Inquire N/A
700-0008-1N john Deere
Cutter BarPlatform 200-900 Series Lexion
All Years
560 / 570 / 575 / 580 / 585 / 730 / 730P / 740 / 740tt / 750 / 750tt /
7400 / 7400tt / 7500 / 7500tt
Narrow Body
70" 21 Spline
Faceplate Adapter
Yokes need to be shaved for clearance on
feederhouse shaft2-4 Please Inquire
2x 26" Female 21 Spline 14 Series
2x 28" Male 1-1/8" Hex 14 Series
500-0200 - $650 Please Inquire Please Inquire N/A
700-0008-1N john Deere Corn Head
600 Series (Serial Number
Break - 745100)
All Years
560 / 570 / 575 / 580 / 585 / 730 / 730P / 740 / 740tt / 750 / 750tt /
7400 / 7400tt / 7500 / 7500tt
Narrow Body
70" 21 Spline
Faceplate Adapter
Yokes need to be shaved for clearance on
feederhouse shaft2-4 Please Inquire
2x 26" Female 21 Spline 35 Series
2x 28" Male 1-1/4" Hex 35 Series
Not Typically Necessary Please Inquire Please Inquire N/A
700-0008-1N john Deere Corn Head600 Series
(Serial Number Break 745101-)
All Years
560 / 570 / 575 / 580 / 585 / 730 / 730P / 740 / 740tt / 750 / 750tt /
7400 / 7400tt / 7500 / 7500tt
Narrow Body
70" 21 Spline
Faceplate Adapter
Yokes need to be shaved for clearance on
feederhouse shaft2-4 Please Inquire Not Typically
NecessaryNot Typically Necessary Please Inquire Please Inquire N/A
700-0008-1N john Deere
Cutter BarPlatform 600 Series (30'
or shorter)
All Years
560 / 570 / 575 / 580 / 585 / 730 / 730P / 740 / 740tt / 750 / 750tt /
7400 / 7400tt / 7500 / 7500tt
Narrow Body
70" 21 Spline
Faceplate Adapter
Yokes need to be shaved for clearance on
feederhouse shaft2-4 Please Inquire
2x 26" Female 21 Spline 14 Series
2x 28" Male 1-1/8" Hex 14 Series
Not Typically Necessary Please Inquire Please Inquire N/A
700-0008-1N john Deere
Cutter BarPlatform 600 Series (35'
or longer)
All Years
560 / 570 / 575 / 580 / 585 / 730 / 730P / 740 / 740tt / 750 / 750tt /
7400 / 7400tt / 7500 / 7500tt
Narrow Body
70" 21 Spline
Faceplate Adapter
Yokes need to be shaved for clearance on
feederhouse shaft2-4 Please Inquire Not Typically
NecessaryNot Typically Necessary Please Inquire Please Inquire N/A
700-0008-1N john Deere
Flex Draper 600 - 700 Series
All Years
560 / 570 / 575 / 580 / 585 / 730 / 730P / 740 / 740tt / 750 / 750tt /
7400 / 7400tt / 7500 / 7500tt
Narrow Body
70" 21 Spline
Faceplate Adapter
Yokes need to be shaved for clearance on
feederhouse shaft2-4 Please Inquire
1x 30" Star Shaped Male
Waltersheid Shaft
30" Plastic Shielding
Not Typically Necessary Please Inquire Please Inquire N/A
700-0008-1W john Deere
Corn HeadRow Head
40, 50A, or 90 Series
All Years
590 / 595 / 760 / 760tt / 780 / 780tt / 8600 /
8600tt / 8700 / 8700tt / 8800 / 8800tt
Wide Body
80"21 Spline
Faceplate Adapter
Yokes need to be shaved for clearance on
feederhouse shaft2-4 Please Inquire
2x 26" Female 21 Spline 35 Series
2x 28" Male 1-1/8" Hex 35 Series
500-0208 - $450500-0210 - $450500-0212 - $450500-0214 - $450
Please Inquire Please Inquire N/A
700-0008-1W john Deere
Cutter BarPlatform 200-900 Series
All Years
590 / 595 / 760 / 760tt / 780 / 780tt / 8600 /
8600tt / 8700 / 8700tt / 8800 / 8800tt
Wide Body
80"21 Spline
Faceplate Adapter
Yokes need to be shaved for clearance on
feederhouse shaft2-4 Please Inquire
2x 26" Female 21 Spline 14 Series
2x 28" Male 1-1/8" Hex 14 Series
500-0200 - $650 Please Inquire Please Inquire N/A
PART # Header Manufacturer
TYPE OF HEAD
Header Model #
YearSerial #
Combine Manufacturer
CombineYear
Model #'s
Feederhouse Shaft Length / Shaft Type
Conversion Type
Additional Information
Installation Time
(Hours)
HeaderConversion
Components
TelescopicPower Shafts
Contact Bish Enterprises For Pricing (Series
Options Vary)
Bearing Support Kit (No T.P.S.)
Hydraulic Components
Needed
Headsight®Height
Conversion (Sensor)
Accessory Components
*Prices listed are subject to change without notice. Contact Bish Enterprises for Current Pricing. www. bishenterprise.com**Prices shown are list price and do not reflect any promotional, bulk, or dealer pricing. Contact Bish Enterprises for dealer or bulk pricing information.***Bish Enterprises is a privately owned company and is not affiliated with or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®, in any way or form. The terms “Agco”, “Case IH”, “CAT”, “Claas/Lexion”, “Gleaner”, “John Deere” or “Deere & Company”, “Massey”, “New Holland”, or “Shelbourne Reynolds” and any images of Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds® equipment are for descriptive purposes only and in no way infer or imply that any part or accessory sold by Bish Enterprises or advertised on this website is manufactured, sold, or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®.
CAT Header Conversion Combinations
700-0008-1W john Deere Corn Head
600 Series (Serial Number
Break - 745100)
All Years
590 / 595 / 760 / 760tt / 780 / 780tt / 8600 /
8600tt / 8700 / 8700tt / 8800 / 8800tt
Wide Body
80"21 Spline
Faceplate Adapter
Yokes need to be shaved for clearance on
feederhouse shaft2-4 Please Inquire
2x 26" Female 21 Spline 35 Series
2x 28" Male 1-1/4" Hex 35 Series
Not Typically Necessary Please Inquire Please Inquire N/A
700-0008-1W john Deere Corn Head
600 Series (Serial Number Break 745101 -
)
All Years
590 / 595 / 760 / 760tt / 780 / 780tt / 8600 /
8600tt / 8700 / 8700tt / 8800 / 8800tt
Wide Body
80"21 Spline
Faceplate Adapter
Yokes need to be shaved for clearance on
feederhouse shaft2-4 Please Inquire Not Typically
NecessaryNot Typically Necessary Please Inquire Please Inquire N/A
700-0008-1W john Deere
Cutter BarPlatform 600 Series (30'
or shorter)
All Years
590 / 595 / 760 / 760tt / 780 / 780tt / 8600 /
8600tt / 8700 / 8700tt / 8800 / 8800tt
Wide Body
80"21 Spline
Faceplate Adapter
Yokes need to be shaved for clearance on
feederhouse shaft2-4 Please Inquire
2x 26" Female 21 Spline 14 Series
2x 28" Male 1-1/8" Hex 14 Series
Not Typically Necessary Please Inquire Please Inquire N/A
700-0008-1W john Deere
Cutter BarPlatform 600 Series (35'
or longer)
All Years
590 / 595 / 760 / 760tt / 780 / 780tt / 8600 /
8600tt / 8700 / 8700tt / 8800 / 8800tt
Wide Body
80"21 Spline
Faceplate Adapter
Yokes need to be shaved for clearance on
feederhouse shaft2-4 Please Inquire Not Typically
NecessaryNot Typically Necessary Please Inquire Please Inquire N/A
700-0008-1W john Deere
Flex Draper 600 - 700 Series
All Years
590 / 595 / 760 / 760tt / 780 / 780tt / 8600 /
8600tt / 8700 / 8700tt / 8800 / 8800tt
Wide Body
80"21 Spline
Faceplate Adapter
Yokes need to be shaved for clearance on
feederhouse shaft2-4 Please Inquire
1x 30" Star Shaped Male
Waltersheid Shaft
30" Plastic Shielding
Not Typically Necessary Please Inquire Please Inquire N/A
700-0008-9P john Deere Cutter BarPlatform
200 / 900 Series Lexion
All Years
590 / 595 / 760 / 760tt / 780 / 780tt / 8600 /
8600tt / 8700 / 8700tt / 8800 / 8800tt
Wide Body
80"21 Spline
•Cut & Weld Kit•Relocate TPS•2" Wedge Kit
Will Need the Dimensions of the Top Bar 7-10 $2,995
1x 28" Female 21 Spline PB Shaved 35 Series On Left
Side
1x 28" Female 21 Spline AL 35
Series On Right Side
2x Male 1-1/8" Hex 35 Series
500-0200 - $650 Please Inquire Please Inquire N/A
700-0008-9P john Deere Cutter BarPlatform
200 / 900 Series Lexion
All Years
560 / 570 / 575 / 580 / 585 / 730 / 730P / 740 / 740tt / 750 / 750tt /
7400 / 7400tt / 7500 / 7500tt
Narrow Body
70" 21 Spline
•Cut & Weld Kit•Relocate TPS•2" Wedge Kit
Will Need the Dimensions of the Top Bar
Yokes need to be shaved for clearance on
feederhouse shaft
7-10 $2,995
1x 28" Female 21 Spline PB Shaved 35 Series On Left
Side
1x 28" Female 21 Spline AL 35
Series On Right Side
2x Male 1-1/8" Hex 35 Series
500-0200 - $650 Please Inquire Please Inquire N/A
700-0008-6-E john Deere
Corn Head
600 Series
Serial # -745100
Lexion
All Years
560 / 570 / 575 / 580 / 585 / 730 / 730P / 740 / 740tt / 750 / 750tt /
7400 / 7400tt / 7500 / 7500tt
Narrow Body
70" 21 Spline
•Cut & Weld Kit•Relocate TPS•2" Wedge Kit
Yokes need to be shaved for clearance on
feederhouse shaft7-10 $3,995
2x 28" Female 21 Spline 35 Series
2x 31" Male 1-1/4" Hex Male 35
Series or 48" Male 1-1/4" Hex Male 35
Series
Not Typically Necessary Please Inquire Please Inquire N/A
PART # Header Manufacturer
TYPE OF HEAD
Header Model #
YearSerial #
Combine Manufacturer
CombineYear
Model #'s
Feederhouse Shaft Length / Shaft Type
Conversion Type
Additional Information
Installation Time
(Hours)
HeaderConversion
Components
TelescopicPower Shafts
Contact Bish Enterprises For Pricing (Series
Options Vary)
Bearing Support Kit (No T.P.S.)
Hydraulic Components
Needed
Headsight®Height
Conversion (Sensor)
Accessory Components
*Prices listed are subject to change without notice. Contact Bish Enterprises for Current Pricing. www. bishenterprise.com**Prices shown are list price and do not reflect any promotional, bulk, or dealer pricing. Contact Bish Enterprises for dealer or bulk pricing information.***Bish Enterprises is a privately owned company and is not affiliated with or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®, in any way or form. The terms “Agco”, “Case IH”, “CAT”, “Claas/Lexion”, “Gleaner”, “John Deere” or “Deere & Company”, “Massey”, “New Holland”, or “Shelbourne Reynolds” and any images of Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds® equipment are for descriptive purposes only and in no way infer or imply that any part or accessory sold by Bish Enterprises or advertised on this website is manufactured, sold, or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®.
CAT Header Conversion Combinations
700-0008-6-E john Deere
Corn Head
600 Series
Serial # -745100
Lexion
All Years
590 / 595 / 760 / 760tt / 780 / 780tt / 8600 /
8600tt / 8700 / 8700tt / 8800 / 8800tt
Wide Body
80"21 Spline
•Cut & Weld Kit•Relocate TPS•2" Wedge Kit
Yokes need to be shaved for clearance on
feederhouse shaft7-10 $3,995
2x 28" Female 21 Spline 35 Series
2x 31" Male 1-1/4"
Hex Male 35 Series or 48" Male 1-1/4" Hex Male 35
Series
Please Inquire
500-0221 $450Please Inquire Please Inquire N/A
700-0008-6-L john Deere
Corn Head600 Series
Serial # 745101-
Lexion
All Years
590 / 595 / 760 / 760tt / 780 / 780tt / 8600 /
8600tt / 8700 / 8700tt / 8800 / 8800tt
Wide Body
80"21 Spline
•Cut & Weld Kit•Relocate TPS•2" Wedge Kit
Yokes need to be shaved for clearance on
feederhouse shaft7-10 $3,995 Not Typically
NecessaryNot Typically Necessary Please Inquire Please Inquire N/A
700-0008-6-L john Deere
Corn Head600 Series
Serial # 745101-
Lexion
All Years
560 / 570 / 575 / 580 / 585 / 730 / 730P / 740 / 740tt / 750 / 750tt /
7400 / 7400tt / 7500 / 7500tt
Narrow Body
70" 21 Spline
•Cut & Weld Kit•Relocate TPS•2" Wedge Kit
Yokes need to be shaved for clearance on
feederhouse shaft7-10 $3,995 Not Typically
NecessaryNot Typically Necessary Please Inquire Please Inquire N/A
700-0008-6P-30
john Deere
Platform
30 Ft or less
600 SeriesLexion
All Years
590 / 595 / 760 / 760tt / 780 / 780tt / 8600 /
8600tt / 8700 / 8700tt / 8800 / 8800tt
Wide Body
80"21 Spline
•Cut & Weld Kit•Relocate TPS•2" Wedge Kit
Yokes need to be shaved for clearance on
feederhouse shaft7-10 $3,995
1x 28" Female 21 Spline 35 Series
1x 31" Male 1-1/8" Hex Male 35
Series
Not Typically Necessary Please Inquire Please Inquire N/A
700-0008-6P-30
john Deere
Platform
30 Ft or less
600 SeriesLexion
All Years
560 / 570 / 575 / 580 / 585 / 730 / 730P / 740 / 740tt / 750 / 750tt /
7400 / 7400tt / 7500 / 7500tt
Narrow Body
70" 21 Spline
•Cut & Weld Kit•Relocate TPS•2" Wedge Kit
Yokes need to be shaved for clearance on
feederhouse shaft7-10 $3,995
1x 28" Female 21 Spline 35 Series
1x 31" Male 1-1/8" Hex Male 35
Series
Not Typically Necessary Please Inquire Please Inquire N/A
700-0008-6P-35
john Deere
Platform
35 Ft or more
600 SeriesLexion
All Years
590 / 595 / 760 / 760tt / 780 / 780tt / 8600 /
8600tt / 8700 / 8700tt / 8800 / 8800tt
Wide Body
80"21 Spline
•Cut & Weld Kit•Relocate TPS•2" Wedge Kit
Yokes need to be shaved for clearance on
feederhouse shaft7-10 $3,995 Not Typically
NecessaryNot Typically Necessary Please Inquire Please Inquire N/A
700-0008-6P-35
john Deere
Platform
35 Ft or more
600 SeriesLexion
All Years
560 / 570 / 575 / 580 / 585 / 730 / 730P / 740 / 740tt / 750 / 750tt /
7400 / 7400tt / 7500 / 7500tt
Narrow Body
70" 21 Spline
•Cut & Weld Kit•Relocate TPS•2" Wedge Kit
Yokes need to be shaved for clearance on
feederhouse shaft7-10 $3,995 Not Typically
NecessaryNot Typically Necessary Please Inquire Please Inquire N/A
700-0120 john Deere
Corn HeadRow HeadCutter BarPlatform
All Challenger
520C / 540C / 550C / 560C / 540E / 660 / 660B / 670 / 670B /
680B Level Land Only
90" •Adapter Plate•Convert to TPS
For Level Land Only. If equipped with Smart-Trac, Head needs to be modified.
1-2 $1,795
2x 26" Female 21 Spline 14 Series
2x 28" Male 1-1/8" Hex 14 Series
500-0200 - $650
500-0208 - $450500-0210 - $450500-0212 - $450500-0214 - $450
Not Typically Necessary Please Inquire N/A
700-0011ST john Deere
Corn HeadRow HeadCutter BarPlatform
All challanger
A Series - A65 / A66 / A75 / A76 / A85 /
A86 / C62 Level Land Only
90"
21 Spline
•Relocate Top Toolbar
•Wedge
If equipped with Smart-Trac, Head needs to be
modified.31 $6,995
Including Labor
2x 26" Female 21 Spline 14 Series
2x 28" Male 1-1/8" Hex 14 Series
500-0200 - $650
500-0208 - $450500-0210 - $450500-0212 - $450500-0214 - $450
Not Typically Necessary Please Inquire N/A
PART # Header Manufacturer
TYPE OF HEAD
Header Model #
YearSerial #
Combine Manufacturer
CombineYear
Model #'s
Feederhouse Shaft Length / Shaft Type
Conversion Type
Additional Information
Installation Time
(Hours)
HeaderConversion
Components
TelescopicPower Shafts
Contact Bish Enterprises For Pricing (Series
Options Vary)
Bearing Support Kit (No T.P.S.)
Hydraulic Components
Needed
Headsight®Height
Conversion (Sensor)
Accessory Components
*Prices listed are subject to change without notice. Contact Bish Enterprises for Current Pricing. www. bishenterprise.com**Prices shown are list price and do not reflect any promotional, bulk, or dealer pricing. Contact Bish Enterprises for dealer or bulk pricing information.***Bish Enterprises is a privately owned company and is not affiliated with or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®, in any way or form. The terms “Agco”, “Case IH”, “CAT”, “Claas/Lexion”, “Gleaner”, “John Deere” or “Deere & Company”, “Massey”, “New Holland”, or “Shelbourne Reynolds” and any images of Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds® equipment are for descriptive purposes only and in no way infer or imply that any part or accessory sold by Bish Enterprises or advertised on this website is manufactured, sold, or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®.
CAT Header Conversion Combinations
700-0036 New Holland
Corn Heads Only 96C or 98C Lexion
All Years
560 / 570 / 575 / 580 / 585 / 730 / 730P / 740 / 740tt / 750 / 750tt /
7400 / 7400tt / 7500 / 7500tt
Narrow Body
70" 21 Spline
•Cut & Weld Kit•Convert or
Relocate TPS
Requires parts from 3 adapters ( 700 - 0270 + 700-
0008 + 700-0036)Feeder House Components Provided. Back Drive shaft cut back to center support
bearing.
3 $2,995
2x 28" Female 21 Spline 35 Series
2x 31" Male 1/1/4 Hex 35 Series
Please Inquire Please InquireCustom Build
Please Call
Not Typically Necessary
700-0036 New Holland
Corn Heads Only 96C or 98C Lexion
All Years
590 / 595 / 760 / 760tt / 780 / 780tt / 8600 /
8600tt / 8700 / 8700tt / 8800 / 8800tt
Wide Body
80"21 Spline
•Cut & Weld Kit•Convert or
Relocate TPS
Requires parts from 3 adapters ( 700 - 0270 + 700-
0008 + 700-0036)Feeder House Components Provided. Back Drive shaft cut back to center support
bearing.
3 $2,995
2x 28" Female 21 Spline 35 Series
2x 31" Male 1/1/4 Hex 35 Series
Please Inquire Please InquireCustom Build
Please Call
Not Typically Necessary
700-5099 Gleaner Stripper Head 6000 CAT
400, 500, 600, or 700 Series
Narrow Body
70" 21 SplineShaved
•Adapter Plate 750-5060 + other components 3-4 $4,095 Yoke Change Not Typically
Necessary Please InquireCustom Build
Please Call
Not Typically Necessary
700-5100 Gleaner Stripper Head 6000 CAT
400, 500, 600, or 700 Series
Wide Body
80"21 SplineShaved
•Adapter Plate 750-5060 + other components 3-4 $4,095 Yoke Change Not Typically
Necessary Please InquireCustom Build
Please Call
Not Typically Necessary
700-9250LX Gleaner
Dyna-Flex Draper 9250
All Years
560 / 570 / 575 / 580 / 585 / 730 / 730P / 740 / 740tt / 750 / 750tt /
7400 / 7400tt / 7500 / 7500tt
Narrow Body
70" 21 Spline
•Adapter Plate Remove factory plate & bolt in Bish adapter along with
electrical5-6 $3,495 Not Typically
NecessaryNot Typically Necessary
Included in Headsight Kit
HD0CA12-31A$9215
Not Typically Necessary
700-9250LX Gleaner
Dyna-Flex Draper 9250 Lexion
All Years
590 / 595 / 760 / 760tt / 780 / 780tt / 8600 /
8600tt / 8700 / 8700tt / 8800 / 8800tt
Wide Body
80"21 Spline
•Adapter Plate Remove factory plate & bolt in Bish adapter along with
electrical5-6 $3,495 Not Typically
NecessaryNot Typically Necessary
Included in Headsight Kit
HD0CA12-31A$9215
Not Typically Necessary
700-9250LX Agco
Dyna-Flex Draper 9250 Lexion
All Years
560 / 570 / 575 / 580 / 585 / 730 / 730P / 740 / 740tt / 750 / 750tt /
7400 / 7400tt / 7500 / 7500tt
Narrow Body
70" 21 Spline
•Adapter Plate Remove factory plate & bolt in Bish adapter along with
electrical5-6 $3,495 Not Typically
NecessaryNot Typically Necessary
Included in Headsight Kit
HD0CA12-31A$9215
Not Typically Necessary
700-9250LX Agco
Dyna-Flex Draper 9250 Lexion
All Years
590 / 595 / 760 / 760tt / 780 / 780tt / 8600 /
8600tt / 8700 / 8700tt / 8800 / 8800tt
Wide Body
80"21 Spline
•Adapter Plate Remove factory plate & bolt in Bish adapter along with
electrical5-6 $3,495 Not Typically
NecessaryNot Typically Necessary
Included in Headsight Kit
HD0CA12-31A$9215
Not Typically Necessary
700-9250LX Massey
Dyna-Flex Draper 9250 Lexion
All Years
560 / 570 / 575 / 580 / 585 / 730 / 730P / 740 / 740tt / 750 / 750tt /
7400 / 7400tt / 7500 / 7500tt
Narrow Body
70" 21 Spline
•Adapter Plate •Change Yoke
Remove factory plate & bolt in Bish adapter along with
electrical5-6 $3,995 Not Typically
NecessaryNot Typically Necessary
Included in Headsight Kit
HD0CA12-31A$9215
Not Typically Necessary
PART # Header Manufacturer
TYPE OF HEAD
Header Model #
YearSerial #
Combine Manufacturer
CombineYear
Model #'s
Feederhouse Shaft Length / Shaft Type
Conversion Type
Additional Information
Installation Time
(Hours)
HeaderConversion
Components
TelescopicPower Shafts
Contact Bish Enterprises For Pricing (Series
Options Vary)
Bearing Support Kit (No T.P.S.)
Hydraulic Components
Needed
Headsight®Height
Conversion (Sensor)
Accessory Components
*Prices listed are subject to change without notice. Contact Bish Enterprises for Current Pricing. www. bishenterprise.com**Prices shown are list price and do not reflect any promotional, bulk, or dealer pricing. Contact Bish Enterprises for dealer or bulk pricing information.***Bish Enterprises is a privately owned company and is not affiliated with or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®, in any way or form. The terms “Agco”, “Case IH”, “CAT”, “Claas/Lexion”, “Gleaner”, “John Deere” or “Deere & Company”, “Massey”, “New Holland”, or “Shelbourne Reynolds” and any images of Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds® equipment are for descriptive purposes only and in no way infer or imply that any part or accessory sold by Bish Enterprises or advertised on this website is manufactured, sold, or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®.
CAT Header Conversion Combinations
700-9250LX Massey
Dyna-Flex Draper 9250 Lexion
All Years
590 / 595 / 760 / 760tt / 780 / 780tt / 8600 /
8600tt / 8700 / 8700tt / 8800 / 8800tt
Wide Body
80"21 Spline
•Adapter Plate •Change Yoke
Remove factory plate & bolt in Bish adapter along with
electrical5-6 $3,995 Not Typically
NecessaryNot Typically Necessary
Included in Headsight Kit
HD0CA12-31A$9215
Not Typically Necessary
508 South D Road - Giltner, NE 68841 61028080 (402) 849-2674 - www.bishenterprise.com - [email protected] Bish Enterprises is a privately owned company and is not affiliated with or endorsed by John Deere® or Deere & Company in any way or form. The terms “John Deere” or “Deere & Company”, and any images of John Deere® or Deere & Company equipment are for descriptive purposes only and in no way infer or imply that any part or accessory sold by Bish Enterprises or advertised on this website is manufactured, sold, or endorsed by John Deere® or Deere & Company.
Part # Item Price
Complete Telescoping Power Shafts (Complete Male and Female Shaft with Yoke)
14 Series Single T.P.S ( 18" - 31") $450.00 14 Series Single T.P.S. (18" - 31") - Half Shaft $265.00 14 Series Single T.P.S ( 31" - 60") $450.00 14 Series Single T.P.S ( 31" - 60") - Half Shaft $250.00 35 Series Single T.P.S ( 27" - 31") $500.00 35 Series Single T.P.S ( 18" - 31") - Half Shaft $275.00 35 Series Single T.P.S ( 31" - 40") $500.00 35 Series Single T.P.S ( 31" - 40") - Half Shaft $300.00 35 Series Single T.P.S ( 41" - 60") $550.00 35 Series Single T.P.S ( 41" - 60") - Half Shaft $300.00 44 Series Single T.P.S ( 41" - 60") - Square $950.00 44 Series Single T.P.S ( 41" - 60") - Spline $950.00 AW36 Lengthen Drive Shaft No Yoke $250.00 AW36 Lengthen Drive Shaft 6 Spline Yoke $500.00 AW36 Complete Half Shaft (Male) $600.00 John Deere® Contour Master Shafts $550.00 John Deere® Contour Master Shafts (Refurbished) $350.00
Case® Drive-line for 700-0270 & 700-0375 Kit (AW36
Complete Half Shaft (Male)) $600.00
Yokes & Cross Kits 506-200-1400 14 Series Cross Kit $35.00
14 Series Replacement Yoke $75.00 506-200-3500 35 Series Cross Kit $40.00
35 Series Replacement Yoke $85.00 506-200-4400 44 Series Cross Kit $75.00
44 Series Yoke $150.00 506-200-7676 AW-35 Cross Kit $37.50
Prices listed are subject to change without no�ce. Contact Bish Enterprises for Current Pricing. Prices shown are list price and do not reflect any promo�onal, bulk, or dealer pricing. Contact Bish Enterprises for dealer or bulk pricing informa�on.
508 South D Road - Giltner, NE 68841 61028080 (402) 849-2674 - www.bishenterprise.com - [email protected] Bish Enterprises is a privately owned company and is not affiliated with or endorsed by John Deere® or Deere & Company in any way or form. The terms “John Deere” or “Deere & Company”, and any images of John Deere® or Deere & Company equipment are for descriptive purposes only and in no way infer or imply that any part or accessory sold by Bish Enterprises or advertised on this website is manufactured, sold, or endorsed by John Deere® or Deere & Company.
AW-35 Yoke $85.00 506-201-7989 AW-36 Cross Kit $85.00
AW-36 Yoke $90.00 Part # Item Price
Stub Adapter
507-1001 1-1/2" Hex Female x 1-1/4" Hex Male $125.00
507-1007 1-1/4" Hex Female x 1-1/4" Hex Male $125.00
507-1010 1-1/4" Hex Female x 1-1/8" Hex Male $125.00
507-1013 1-1/8" Hex Female to 1-3/8" 6 Spline Male $125.00
507-1016 1-1/8" Hex Female x 1-1/4" Hex Male $125.00
507-1019 1-1/8" Hex Female x 1-3/8" 21 Spline Male $125.00
507-1025 1-3/8" 21 Spline Female x 1-1/4" Hex Male $125.00
507-1028 1-3/8" 21 Spline Female x 1-1/8" Hex Male $125.00
507-1031 1-3/8" 21 Spline Female x 6 Spline Male $125.00
507-1034 1-3/8" 21 Spline QT Female x 1-1/8" Hex Male $125.00
507-1037 1-3/8" 6 Spline Female x 1-1/8" Hex Male $125.00
507-1040 1-3/8" 6 Spline Female x 1-3/8" 21 Spline Male $125.00
Part # Item Price
Repositioning Adapters 507-1101 1-1/8" Hex x 10" $125.00
507-1104 1-1/8" Hex x 4" $125.00
507-1107 1-3/8" 21 Spline x 3 1/2" Turned $125.00
507-1110 1-3/8" 21 Spline x 4" $125.00
507-1113 1-3/8" 6 Spline x 3 1/2" Turned $125.00
507-1116 1-3/8" 6 Spline x 4" $125.00
507-1119 4 Bolt Round Hub $125.00
507-1122 Tapered Hub $125.00
Part # Item Price
Couplers 507-1201 1" Hex Coupler (with Set Screws) $65.00
507-1204 1-1/8 Hex Coupler (with Set Screws) $65.00
507-1207 1-1/4 Hex Coupler (with Set Screws) $85.00
508 South D Road - Giltner, NE 68841 61028080 (402) 849-2674 - www.bishenterprise.com - [email protected] Bish Enterprises is a privately owned company and is not affiliated with or endorsed by John Deere® or Deere & Company in any way or form. The terms “John Deere” or “Deere & Company”, and any images of John Deere® or Deere & Company equipment are for descriptive purposes only and in no way infer or imply that any part or accessory sold by Bish Enterprises or advertised on this website is manufactured, sold, or endorsed by John Deere® or Deere & Company.
507-1210 1-3/8 Hex Coupler (with Set Screws) $95.00
507-1213 1-1/2 Hex Coupler (with Set Screws) $100.00
507-1216 Pipe Sleeve for 1-1/4" Shaft (Weld On) $30.00
Part # Item Price
Short Hex Shafts Threaded 1" Hex Shafting (Per foot) 3+ ft. $18.00
Threaded 1-1/8" Hex Shafting (Per foot) 3+ ft. $18.75
Threaded 1-1/4" Hex Shafting (Per foot) 3+ ft. $21.00
Threaded 1-1/2" Hex Shafting (Per foot) 3+ ft. $25.00
503-4001 6-1/4" Hex Shaft - Non-Threaded (Bolt-on Collar) $65.00
503-4005 8-3/4" Hex Shaft - Threaded (with Lock Collar) $100.00
503-4002 8" Hex Shaft - Non-Threaded (Bolt-on Collar) $100.00
503-4004 8" Hex Shaft - Threaded (with Lock Collar) $100.00
503-4006 10" Hex Shaft - Threaded (with Lock Collar) $100.00
503-4003 10" Hex Shaft - Non-Threaded (Bolt-on Collar) $100.00
503-4009 18" Hex Shaft - Threaded (with Lock Collar) $125.00
508 South D Road - Giltner, NE 68841 61028080 (402) 849-2674 - www.bishenterprise.com - [email protected] Bish Enterprises is a privately owned company and is not affiliated with or endorsed by John Deere® or Deere & Company in any way or form. The terms “John Deere” or “Deere & Company”, and any images of John Deere® or Deere & Company equipment are for descriptive purposes only and in no way infer or imply that any part or accessory sold by Bish Enterprises or advertised on this website is manufactured, sold, or endorsed by John Deere® or Deere & Company.
Part # Item Price
992-LAN166915 Dark or light blue coupler for reel aft or reel fore function For John Deere® Header $96.60
992-LAN166916 Red coupler for reel drive function For John Deere® Header $111.55
992-LAN166917 Yellow coupler for reel return function For John Deere® Header $111.55
992-LAN166918 Green coupler for reel lift function For John Deere® Header $111.55
992-LAN166987 1/2" coupler O-ring seal repair kit For John Deere® Header $17.25
992-LAN166988 3/8" coupler O-ring seal repair kit For John Deere® Header $17.25
992-LAN166990 Single point coupler block with no couplers For John Deere® Header $251.85
992-LAN166991 Complete single point block (all functions) For John Deere® Header $714.15
992-LAN166992 Single point block with reel fore function only For John Deere® Header $392.15
992-LAN166993 Single point block with reel fore and reel aft functions For John Deere® Header $410.55
992-LAN166994 Single point block with reel drive and reel return functions For John Deere® Header $424.35
992-LAN166995 Single point block with reel drive, reel return, and reel lift For John Deere® Header $543.95
992-LAN166996 Single point block with reel drive function only For John Deere® Header $358.80
992-LAN166997 Single point block with reel fore, reel aft, reel drive, and reel return For John Deere® Header $649.75
992-LAN166998 Single point coupler with reel lift function only For John Deere® Header $361.10
992-LAN204828BLKS Coupler block storage bracket with hardware For John Deere® Header $67.85
992-LAN204828S Coupler block storage bracket with hardware For John Deere® Header $58.65
992-LAN2P5065-2AFC
Single point coupler block For CNH® corn headers $230.00
992-LAN2P5065-5AFC
Single point coupler block CNH® platforms $385.25
Part # Item Price
Prices listed are subject to change without no�ce. Contact Bish Enterprises for Current Pricing. Prices shown are list price and do not reflect any promo�onal, bulk, or dealer pricing. Contact Bish Enterprises for dealer or bulk pricing informa�on.
508 South D Road - Giltner, NE 68841 61028080 (402) 849-2674 - www.bishenterprise.com - [email protected] Bish Enterprises is a privately owned company and is not affiliated with or endorsed by John Deere® or Deere & Company in any way or form. The terms “John Deere” or “Deere & Company”, and any images of John Deere® or Deere & Company equipment are for descriptive purposes only and in no way infer or imply that any part or accessory sold by Bish Enterprises or advertised on this website is manufactured, sold, or endorsed by John Deere® or Deere & Company.
992-LAN3P5065-5GMC
Single point coupler block for the combine side of CNH® headers For John Deere® Header $414.00
992-LAN84207 Single point hydraulic kit For John Deere® 50 Series STS combines $1,891.75
992-LAN84208 Single point hydraulic kit For John Deere® 50 Series Walker combines $1,891.75
992-LAN84209 Single point hydraulic kit For John Deere® 50 Series Walker combines $1,891.75
992-LAN84209NE Single point hydraulic kit For John Deere® 9X00 and 9X10 Series combines $1,788.25
992-LANAH225671 Combine side single point hydraulic large valve replacement For John Deere® Combine $241.50
992-LANAXE21789 Combine side single point hydraulic small valve replacement For John Deere® Combine $208.15