Carson’s Nut - Bolt & Tool Co.The Premier Tool Distributor

621 McGee Rd Unit BAnderson, SC 29625

Ph: 864-622-1080Fx: 864-622-1086

522 Broadcast RdSpartanburg, SC 29303

Ph: 864-585-9686Fx: 864-583-9931

301 Hammett St ExGreenville, SC 29609Ph: 864-242-4720Fx: 864-242-6821

GRINDING WHEEL For Steel and Cast IronPERFORMANCE LINE SG-ELASTIC: A 24 R SG•Reinforced Grinding Wheels for Steel, Cast Iron:Type 27 (Depressed Center), Type 28 (Saucer)•Performance grinding wheel provides good removalrates and long life for reduced wheel changes.

GRINDING/CUTOFF WHEEL - Specialty Line SG-PLUS forStainless Steel (INOX) - Type 1 (Flat)•Features X-SLIM wheels, which are .030” (0.8 mm) – thethinnest wheel achieveable for the fastest cuttingperformance and the least material waste.•Manufactured without addition of ferrous, sulphurous orchlorinated fillers.

CUT-OFF WHEEL For Steel and Cast IronPERFORMANCE LINE SG-ELASTIC•Cut-off wheel for Steel, Cast Iron:Type 27 (Depressed Center)•The wide range of wheel shapes meetall demands for efficient cutting.

NON-WOVEN ABRASIVES - POLIVLIES™ HAND PADS•The low aggressive characteristics of the polyamide fibresand the positive effect of the abrasive non-woven materialscreate brilliant smooth finished surfaces.•Designed for light manual grinding, deburring and cleaningwork on metals, plastics, fibreglass, reinforced plastics,paint, coatings and fillers.

POLIFAN®-CURVE Flap DiscsSGP ZIRKON CURVE•Quickly achieve a smooth, consistent surface finish•Tough and aggressive – removes scale and bead from allmetals: steel, stainless steel (INOX), aluminum and alloys.•Excellent tool life, including the radius edge of the disc.

GRINDING WHEEL For Stainless SteelUNIVERSAL LINE PS-FORTE: A 24 LSF INOX•General purpose grinding wheel for use on all metals.•Smooth grinding action and fast removal rates withminimal contact pressure.•INOX: Manufactured without addition of ferrous,sulphurous or chlorinated fillers.

CUT-OFF WHEEL For Stainless SteelSPECIALTY LINE SG-PLUS Steel (INOX)•Top performing cut-off wheels for Stainless Steel provideunparalleled cutting performance and service life.•The range features X-SLIM wheels, which are.030” (0.8 mm)– the thinnest wheel achieveable for thefastest cutting performance.

Diameter Thickness Arbor Hole/ Grit Max RPM(inches) (mm) Thread Size

4-1/2 .045 1.6 7/8 A.H. 46 13,300

Diameter Thickness Arbor Hole/ Grit Max RPM(inches) (mm) Thread Size

4-1/2 1/4 7.2 7/8 A.H. 24 13,300

EDP Diameter Thickness Arbor Hole/ Grit Max RPM(inches) (mm) Thread Size

63162 4-1/2 .045 1.6 7/8 A.H. 46 13,30063164 6 .045 1.6 7/8 A.H. 46 10,200

Diameter Thickness Arbor Hole/ Grit Max RPM(inches) (mm) Thread Size

4-1/2 .045 1.6 7/8 A.H. 46 13,300

Diameter Arbor Hole/ Max RPM Flange SetThread Size

4-1/2 7/8 A.H. 13,300 EDP 69116/EDP 69118

GRINDING WHEEL For Stainless SteelPERFORMANCE LINE SG-ELASTIC•As tough and safe as a reinforced grinding wheel and100% increased aggressiveness•CC-GRIND-SOLID for rough grinding applications.•50% less noise and vibration during use

Diameter Thickness Arbor Hole/ Grit Max RPM(inches) (mm) Thread Size

4-1/2 9/16 14 7/8 A.H. 40 13,300

Diameter Thickness Arbor Hole Grit Max RPM(inches) (mm)

4-1/2 .045 1.6 7/8 46 13,300

Carson’s Nut - Bolt & Tool Co.The Premier Tool Distributor

621 McGee Rd Unit BAnderson, SC 29625

Ph: 864-622-1080Fx: 864-622-1086

522 Broadcast RdSpartanburg, SC 29303

Ph: 864-585-9686Fx: 864-583-9931

301 Hammett St ExGreenville, SC 29609Ph: 864-242-4720Fx: 864-242-6821

EDP Diameter Arbor Hole/ Grit Max RPMThread Size

60458 4-1/2 7/8 A.H. 46 13,30060460 4-1/2 7/8 A.H. 60 13,30060461 4-1/2 7/8 A.H. 80 13,300

FLAP DISC POLIFAN® PSF ZIRKON-EXTRAFlat (PFF- Type 27)

•Special flap arrangement provides flexibility and cushionedgrinding effect.•Constructed with 40% more material than standard PSFflap discs, providing a long service life

FLAP DISC POLIFAN® SGP-STRONG-FREEZE•High-performance flap disc for the most demandingof grinding tasks.•Innovative abrasive with ceramic grain guaranteesultra-cool grinding on poor heat-conducting materials

EDP Diameter Thickness Arbor Hole/ Grit Max RPM(inches) (mm) Thread Size

62946 4-1/2 9/16 14 7/8 A.H. 36 13,30062948 4-1/2 1/2 13 7/8 A.H. 50 13,300

Diameter Fillet Weld Width Thickness Arbor Hole Grit Max RPM(inches) (mm)

4-1/2 Med > 3/16” (5mm) 9/16 14 7/8 A.H. 60 13,300

FLAP DISC POLIFAN®-CURVEPOLIFAN SGP CO-CURVE

•Designed to quickly achieve a smooth, consistentsurface finish on fillet welds.•The unique radial construction shape (PFR) offers asuperior solution for this common task

FLAP DISC POLIFAN®-CURVEPOLIFAN SGP CURVE-ALU

•Specially formulated for non-loading grinding performanceon soft, greasy grades of Aluminum.•Contains no fillers that might leave undesirable residues•The ground surface can be welded right away, without anyfurther treatment.

Diameter Fillet Weld Width Thickness Arbor Hole Grit Max RPM(inches) (mm)

4-1/2 Large > 5/16” (8mm) 9/16 14 7/8 A.H. 40 13,300

EDP Diameter Thickness Arbor Hole/ Max RPM(inches) (mm) Thread Size

63320 4-1/2 .065 1.9 7/8 A.H. 13,30063333 4-1/2 1/8 2.8 7/8 A.H. 13,300

ANGLE GRINDING DUODISC®•Combination cutting, light deburring and surface grindingwheels conform to U.S. and international safety standards.•Manufactured without addition of ferrous,

sulphurous or chlorinated fillers