car park bq

CONSTRUCTUIN OF TAYLOR’S UNIVERSITY GARDEN CARPARK

Bill of Quantity

Bill No. 1Excavation and Interlock Work

ItemNo.

Description Unit QuantityUnit Rate

RM (letters)Unit Rate

RM (Numbers)

TotalAmount

RM

1/1

Demolishing of the existing store 120 m2 area according to the approved method statement and including transfer the

rubble to approved dump yard according to the engineer instructions.

L.S 1

Five Thousand 5,000.00 5,000.00

1/2

Relocation and replanting of the existing trees. The w o r k includes importing all required materials;

such as agricultural soil, fertilizer, concrete basins, etc. And making good all according to drawings, specifications and instructions of the Engineer.

L.S 1 Two thousand

2,000.00 2,000.00

1/3

Clean, excavate, cut and fill the parking area and Ramp with clean dune sand to the bottom of the sub-base layer design level including watering, compaction

not less than98% & CBR not less than 15%, all according to drawing

and technical specifications.

m2 1,050.0

Two 2.00 2,100.00

1/4

Supply and lay approved sub-base material (Kurkar) of 20 cm thickness for the parking area i n one layer with CBR.>30%, watering and compaction up to 98% maximum d r y

density according to modified proctor test. All according to drawing and technical specifications.

m2 1,000.0

Oneforty

1.40 1,400.00

1/5

Supplying, spreading, leveling, damping and compacting (M.D.D 100%) of 15cm base coarse material with CBR≥80 up to required` levels, according to drawing specifications

and under supervision.

m2 1,000.0 One 1.00 1,000.00

1/6

Supply, spread, install approved colored interlock tiles 8 cm thick including 5 cm clean sand bed, compacting and tiles testing all according to drawings, specifications

and instructions by the Engineer.

m2 1,000.0

One thirty two 1.32 1,320.00

Total (RM) 12,820.00

1

ItemNo.


RM

(letters)

Unit RateRM

(Numbers)

TotalAmount

RM

Rates of Concrete Works shall include:-1. All form works and shuttering (new lumber for shuttering) in any form, shape and size. Making chamfered and curved

edges, allowing for and making grooves and sleeves and using Tie Rods (Batant) for concrete walls ; removal of

Forms and cleaning of all exposed tie wires and rods. Steel forms must be used in shuttering the external decorations.

2. Supplying, Casting, vibrating and curing as per specifications.

3. Approved additives and admixtures.

5. Supplying reinforcement of any grade, size and length as detailed in the drawings, storing on site including cutting,

bending and fixing in position and providing all tying wires, spacers, shop drawings, testing and bar bending schedules

6. Painting of exposed surfaces of underground reinforced concrete elements with two coats of hot bituminous paint (75/25) after primer layer, the strokes of each layer to be

opposite to each other.

7. Compaction and testing under the foundation, ground beams, and ground slabs, the compaction must exceed 97%

of MDD.

8. All works according to specifications , drawings and supervisor engineer instructions

- -Ten

thousand 10,000.00 10,000.00

2/1

Supply and cast ready mix reinforced concrete B (250)

kg/cm2

for the footings and ground beams for boundary beams around the parking area, edge beam. The work shall

include polythene sheets under the footings and beams, excavation, compaction and backfilling, all according to

drawings and technical specifications.

M3 16

Ten 10.00 160.00

2/2Ditto but for middle and copping beam as per specifications,

drawings and supervisor engineer's instructions. M3 8 Twelve 12.00 96.00

2/3

Supply and cast ready mix reinforced concrete B (300) kg/cm2 for columns, footing, ground beams and lintels for guard room. Then price include the cost of used materials equipment, and workmanship for all necessary protections

and safety measures for the excavated area, in addition to the protection of the neighboring foundations if any.

M3 6 One

hundred100.00 600.00

2/4

Supply and cast ready mix reinforced concrete B (300) kg/cm2 for retaining walls (footing, stem) stairs and retaining

beams. The price includes the cost of used materials, equipment and workmanship for all necessary protections and

safety measures for the excavated area, in addition to the protection of the neighboring foundations if any. all works

should be according to Drawings, Specifications and instructions of the Engineer.

M3 24 Twenty 20.00 480.00

Bill No. 2Concrete Works.

2

ItemNo.


RM

(letters)

Unit RateRM

(Numbers)

TotalAmount

RM

2/5

Supply and cast ready mix concrete B250 for Ribbed Slabs of 25cm thickness including reinforced steel, hollow block

(25x40x17cm), drop beams and electrical conduits and all other materials according to Drawings, Specifications and

instructions of the Engineer.

M2 40

Five 5.00 2,00.00

2/6

Supply and cast reinforced concrete (B-250) concrete lining for Ground Slab, ramp and Abutment for retaining wall of10cm. thickness including steel reinforcement ( 8 mm diameter every 20 cm in both directions), reinforced edge beam and polythene sheet , the rate shall include applying well trowelled surface, all in according to drawings,

specifications and engineer's instructions.

M2 40

Fifty 50.00 2,000.00

2/7Ditto but 15 cm thick with 10 mm diameter of reinforcement

steel every 20 cm in both directions for cars' ramp. M2 60 Ten 10.00 600.00

Total (RM) 14,136.00

3

Bill No. 3Building Works.

ItemNo.


RM

(letters)

Unit Rate RM

(Numbers)

Total Amount

RM

The price include:1- Supplying hollow or solid cement block from good and approved factory in perfect dimension and build it

in good manner with a compressive strength 35 kg/cm2

for hollow block and 60 kg/cm2

for solid block. This item will include cement mortars, reinforced concrete

infill (B250) between columns & block walls (10-20 cm wide) with 2Ø8mm/40cm horizontally and 2Ø10mm vertically according to drawings, pipes encasement, and bituminous paper between block work and drop beams& all requirements needed to finish the works according

to the drawings, specification and to the s u p e r v i s i o n engineer instructions.

2- Providing samples for approval and all the required tests.

- -Nine

thousand and fifty

9,050.00 9,050.00

3/1Supply and build hollow cement block 40x20x20cm for external walls according to the drawings, specification

and to the supervision engineer instructions.M

2 400 Twenty 20.00 8,000.00

3/2

Supply and build solid cement block 40x20x20 cm, underground beams, and external boundary for building

including painting the buried parts with one coat of primer and two coats of hot bitumen according to the

drawings, specification and to the supervision engineer instructions.

M2 50 Ten 10.00 500.00

Total (RM) 17,550.00

4

Bill No. 4Plaster Works.

ItemNo.


RM (letters)

Unit Rate RM

(Numbers)

Total Amount

RM

All works must be according to drawings, specification and engineer instructions. Rates shall include :

Supply of all needed materials, including galvanized angles for the corners as well as the use of galvanized wire mesh b e t w e e n

concrete and block work.

Preparation works by covering all conduits of electricity, water supplies , etc., with a galvanized wire mesh at least 20cm width

coated by mortar (1:1) cement : sand and the work includes removal of wires and nails and cleaning of surfaces to be ready for

plastering.

Contractor shall take into consideration that all direct and indirect works and expenses required for the completion of the coming items

are included in the unit price.

Trimming of concrete chippings, removing the wires and etc. and cleaning of existing surfaces to be ready for plastering.

This should be done prior to commencement of plastering and after obtaining a written approval from the supervision engineer.

Curing with water for at least three days for each coat.

- -Ten

thousand 10,000.00 10,000.00

4/1

Supply and make internal plastering 13 mm thick f o r ceiling, walls and soffits. The work includes rough primer nail rendering to form a

key with (mix 1:1) cement sand, second layer 13mm: Base-Coat "Rendering" with (1:3:0.25) cement: sand: lime and third layer:

Finishing Coat with (1:4:0.50) cement: sand: lime . Works include all materials needed to finish the works according to specifications,

drawings and supervisor engineer's instructions.

M2 120

Eight 8.00 960.00

4/2

Supply and make external plastering 20mm thick to walls with four faces : the first is the rough nail rendering (mix 1:1) cement

sand;the second is 5mm thick mortar (mix 1: 2) cement: sand, the third is the undercoat 13mm (mix 1: 3 :0.25) cement:sand:lime, the forth

is two coats of Tyrolean finish ( mix 1: 3) white cement to fine aggregate (Quartiz) and all is according to specifications , drawings

and supervisor engineer's instructions.

M2 600

Eight 8.00 4,800.00

Total (RM) 15,760.00

5

Bill No. 5Finishing work

ItemNo.


RM(letters)

Unit RateRM

(Numbers)

TotalAmount

RM

5/1

Supply and install terrazzo floor tiles (grade A) size25cm x 25cm x 2.5cm laid on 2cm mortar bed and 5 cm sand bed and terrazzo skirting 25cm x 7cm x1cm

including all materials and testing as per specifications and drawings

M2 35

Twenty 20.00 700.00

5/2Supply and Paint the ceiling with one coat of Pendrole

primer and at least two coats of emulsion paint (Polyside) as per specification and drawings

M2 40 Fifty 50.00 2,000.00

5/3Supply and Paint, internal walls with one coat of Pendrole primer and at least two coats of emulsion

paint (Supercryle) as per specification and drawingsM

2 120 Five 5.00 600.00

5/4

Supply and Paint, external road mark painting for the roof of guard room, for the cars parking and tracks

arrows with one prime coat and two finishing coats of approved brand name painting material or equal

approved as specification and drawings

M2 100 Ten 10.00 1,000.00

5/5

Supplying & fix (W1) (1.2X1.6 m) colored aluminum window section 7000 with two rails, with min.

wall thick 1.5mm, glass 4 mm thick, ironmongery , accessories and hard ware as per

specification and drawings.

No. 2Fifty 50.00 100.00

5/6

Supply and fix colored aluminum window W2 hinged type section 4500 type , overall size 70 x100 cm, complete with frame, two hinges at the mid (Jack type), glass 4mm thick, ironmongery and hardware and as per specifications and drawings. The work shall include applying Shatter Resistance Film to the glass.

No. 1 Five hundred

500.00 500.00

5/7

Supply & fix Wooden Door D1 (80X220X4.5 cm) made of wood grade “A” including frame cover

mold, architrave and at least two coats of oil paint, hard ware locked type Walleye switch or equivalent and brass hinges 10cm height and all other fitting

according to specification and drawings.

No. 1Five

hundred 500.00 500.00

5/8

Supply and install white glazed wall tiles (grade A) size 20 cm x 20cm x 6mm thick laid on mortar

backing up to lintel level including lime free cement plaster coat (1:3) as specified in the drawing and

approved by representative engineer.

M2 20

Four 4.00 80.00

5/9

Supply and install best quality non-slipping ceramic floor tiles (grade A) size 20 cm x 20cm x 6mm thick

as specification and drawings.M2 5

Twenty 20.00 100.00

5/10

Supply and install roof water proofing course consisting of polypit sheets (4.0mm thick) and base coat of bitumen and making good all according to specifications and instructions by the Engineer. The rate includes verticals parts skirting as per specific

at.

M2 40 Forty 40.00 1,600.00

Total (RM) 7,180.00

6

ItemNo.


RM (letters)

Unit RateRM

(Numbers)

TotalAmount

RM.6/1 Supplying , fixing and erecting 3" hot galvanize steel Pipe

3 m height, with 3 mm thick hot galvanized sheet base plate, 20×20 cm. The item shall include 4×3/4" Galv. Steel bolts. The item shall also include outdoor streetlight fixture 250 Watt lamp Gas type or equivalent with

1.5" hot galvanized arm 2 m, igniter, choke coil, starter, capacitor, junction box , 3×2.5 sq. mm NYY cable from junction box to the outdoor street light fixture 250 Watt

lamp, and all other materials and accessories required to complete the job according to Drawings, Specifications

and instructions of the Engineer.

No. 7 Sixty 60.00 420.00

.6/2 Supplying, f ix ing and erecting wall outdoor mounted projector. The item shall include 2×3/4" Galv. Steel

bolts , 250 Watt lamp, junction box, igniter, choke coil,Starter, capacitor, 3×2.5 sq. mm NYY cable from junction box to the outdoor street light fixture 250 Watt lamp, and all other materials and accessories required to complete

the job according to Drawings, Specifications and instructions of the Engineer.

No. 3

Eighty 80.00 240.00

.6/3 Supplying and erecting 5×10mm2 XLPE cable to connect the MDB with the source. The item shall include

excavation, backfilling, 3" flexible conduits and warning tape and all other materials and accessories required to complete the job according to Drawings, Specifications

and instructions of the Engineer.Mr 80

Twenty 20.00 1,600.00

.6/4 Supplying and erecting 5×6mm2 XLPE cable, connecting the MDB with each junction box of the external light

Projectors. The item shall include cable channel,excavation, backfilling, 3" flexible conduits , warning tape

and all other materials and accessories required to complete the job according to Drawings, Specifications


Mr 120Twenty 20.00 2,400.00

.6/5 Supplying and installing MDB box (60x40) cm (Type is MOELLER or equivalent). Including all circuit breakers,

bus bars, accessories, and all other materials and accessories required to complete the job according to

Drawings, Specifications and instructions of the Engineer.

LS 1

Five hundred 500.00 500.00

.6/6 Supplying and erecting TV socket outlet including wiring co axial cable 75 ohms and all other materials and

accessories required to complete the job according to Drawings, Specifications and instructions of the Engineer.

No. 1

One hundred 100.00 100.00

.6/7 Supplying and erecting telephone socket outlet including wiring 2 pair cable from the main tel. box including sleeves

and all other materials and accessories required to complete the job according to Drawings, Specifications


No. 2

One hundred 100.00 200.00

.6/8 Supplying and erecting florescent light fixture 220 V, 1X36W, 120 cm long discharge lamp, daylight, electronic starter, wires, conduits, bolts & clamps. Type Gas or equivalent and all other materials and accessories

required to complete the job according to Drawings, Specifications and instructions of the Engineer.

No. 5

Two hundred 200.00 1,000.00

Bill No. 6ELECTRICAL WORKS

7

ItemNo.


RM (letters)

Unit RateRM

(Numbers)

TotalAmount

RM.6/9 Supplying and erecting circular wall and ceiling mounted

polycarbonate light with 60 W lamp waterproof type IP54 including wires, conduits and all other materials and

accessories required to complete the job according to Drawings, Specifications and instructions of the Engineer.

No. 2

Five hundred 500.00 1,000.00

.6/10 Supplying and erecting double pole switch Type Gewiss or approved equal including wires, conduits and all other materials and accessories required to complete the job

according to Drawings, Specifications and instructions of the Engineer.

No. 3

Five hundred 500.00 1,500.00

.6/11 Supplying and erecting single phase, 220V, 16 A socket outlet including wires, conduits and all other materials

and accessories required to complete the job according to Drawings, Specifications and instructions of the

Engineer.No. 5

Five hundred 500.00 2,500.00

.6/12 Supplying and erecting Oz-On A/C regulator including wires, conduits and all other materials and accessories

required to complete the job according to Drawings, Specifications and instructions of the Engineer.

No. 1

Five hundred 500.00 500.00

.6/13 Supplying and erecting security lighting control panel including one 10 A photocell, 1 three poles 3 Kw

contactor, with the needed auxiliary contacts, one toggle switch (0,1,2), one 1×10 A MCB, 3×16 A MCB, and one

24 hour timer and all other materials a n d accessories according to Drawings, Specifications and instructions of

the Engineer.LS 1

Five hundred

500.00 500.00

.6/14 Supply, install UPVC 4" pipes for electrical cable as per drawings, the work include Excavation, backfilling on

layers 20 cm thick with compacting to 97% of MDD. And all required accessories required to complete the job, all according to drawings, specifications and instructions of

the Engineer.Mr 100

Ten 10.00 1,000.00

.6/15 Supply and install 3" flexible PVC conduit with a rope inside it for further ducts, the work include Excavation,backfilling on layers 20 cm thick with compacting to 98 %, and all required accessories required to complete the

job, all according to drawings, specifications and instructions of the Engineer.

Mr 200Ten 10.00 2,000.00

.6/16 Supply and install 60 cm internal diameter precastcircular reinforced concrete electrical manholes, complete

with B300 cast in place reinforced concrete base or (approved precast), cast iron cover (25ton Capacity),

Frame, ring's inside , excavation in any type of soil up to1.5m depth , backfilling with clean sand and compaction, and all required accessories required to complete the job, all according to drawings, specifications and instructions

of the Engineer.

No. 3

Five hundred 500.00 1,500.00

Total (RM) 16,960.00

8

Bill No. 7Plumbing WORKS

ItemNo.


RM (letters)

Unit RateRM

(Numbers)

TotalAmount

RM

All Plumbing works include the required units andits accessories as described in the items and the

rates include:1- All the plumbing units should be from the best

quality and has trade mark.2- Submitting shop drawing for water supply

and waste water networks for approval prior to commencement of the work.

3-Submitting samples for all required material with catalogue indicating its specifications.

4-All required tests , pressure for water network , hydraulic test for sewage lines

5- Cleaning and disinfecting all water pipes.6- Insulation of all galvanized water pipes and

wrapping it with bitumen's sheets and protect pipes located under tiles with cement mortar. In addition to the insulation materials against heat loss for hot

water pipes.

7- All hot and cold water pipes for the points of fixtures to the nearest distribution board.

8-All plumbing works ( wash basin, kitchen sink, gully traps, etc…) include the connection to the nearest trap, WC to the nearest vertical sewage

header in the typical floors and WC in the GF to the nearest manhole and include all accessories

including PVC S and caps for all the ends of pipes

- - Six thousand

6,000.00 6,000.00

7/1 Fix white glazed fireclay Oriental W.C. Supply andsuite (Vitra type - grade A ), or equivalent complete

with 9 liter plastic double action flushing cistern, and fixed chromium plated tap 1/2” Tibesa type or

equivalent, including all water supply pipes16mm (Golany) to the nearest dist. box (DB),

flushing hose sprayer, angle valves, UPVC drainage pipe connecting to the nearest manhole or sewage

header as per specifications, drawings and supervisor engineer instructions.

No. 1

Two thousand

2,000.00 2,000.00

7/2 Supply and fix white glazed fire clay hand washbasin size 55cm x45cm (Vitra type - grade A ) or equivalent, complete with all water supply pipes16mm (Golany) to the nearest distribution box (DB), waste fitting, trap, plug and chain, chromium water

mixer (Tebisa ,jack, wall mounted type or equivalent), glazed fire clay soap holder, and the

drainage line 2” to the nearest floor trap.No. 1

One thousand

1,000.00 1,000.00

7/3 Supply and install white glazed steel shower traysize 70x70x7cm with shower mixer (Tebisa jack

type) including sprayer, hose, stand, glazed fire clay soap holder, including all needed fittings, pipes, and

connections to water network to reach the distribution box. Including cold and hot water

supply lines EPDM 16 mm to the distribution box dia., waste fitting, trap, plug with chain and drainage

connection to the nearest manholes.No. 1

One thousand

1,000.00 1,000.00

9

ItemNo.


RM (letters)

Unit RateRM

(Numbers)

TotalAmount

RM

7/4 Supply and fix floor trap 4inch diameter, complete with heavy duty brass grating and 4”& 2” PVC

drainage pipe to the nearest manhole and including S trap if needed as specification and drawings. No. 1

Five hundred

500.00 500.00

7/5 Supply and install 3" P.V.C drainage pipesIncluding all necessary bends connections and

making good all according to specifications and instructions by the Engineer.

MR 9

Fourty one and five

cent

41.05 369.45

7/6 Supply, paint, fix and disinfect cold water storageplastic tank 1500 liter capacity , approved type, float valve, overflow pipe (1”diam) and drip tray, with all connections to the rising main and distribution pipe

work and stop valves 1”, and painted steelfoundation from welded angles 45x45x4.5mm

50cm high, 5cm new hard wood on the complete area under the tanks, with all accessories as specification and drawings. The rate includes

painting of the water tank.No. 3

One thousand

1,000.00 3,000.00

7/7 Supply and install concrete manhole of internaldiameter 60 cm ,and (50-100) cm depth according to

the required level, 12cm thick plain concrete for walls and base, slab, with cast iron cover with frame

50cm opening, 8 ton bearing capacity, including excavation, backfilling, hunching and making good

according to specification, drawing, and the engineer instructions.

No. 2

One thousand

1,000.00 2,000.00

7/8 Supply and install water distribution box (60x65x15) cm w i t h G o l a n i P i p e s a l l

needed accessories .All lines to have Sagiv valves and Air valves with aluminum cover as per

drawings and engineers instructions. No. 2

One thousand

2,000.00 2,000.00

7/9 Supply and install PE pipe 20mm to connect theMain feeder galv. steel pipe 1" to the DB in the

guard room with all required fittings and accessories. The item includes fixing to the walls using galvanized brackets and connecting it to the MR 70

Fifty 50.00 3,500.00

7/10Install Galvanized steel from the supply water tanks on the building roof to the car bark. The

item includes fixing to the walls using galvanized brackets and connecting it to the water tank with

all required fittings and accessories. MR 25

Fifty 50.00 1,250.00

7/11 Supply and install UPVC pipes 200mm, SN8 foroutlet drain, with sockets ,work includes

excavating of trenches (depth 0.75-1.5m), bedding, compacted backfilling with clean sand, connecting

to the existing manholes and hydraulic test according to the specifications and the engineer’s MR 30

Fifty 50.00 1,500.00

7/12 Supply and construct storm water collection gulliesof length 3.0 m as detailed in drawings constructed of reinforced concrete B300 , including cast iron grills, cast iron curb stone , benching, excavation and backfilling with clean sand and compaction, remove the surplus soil to the tip as shown in the

drawings and according to the specifications and the engineer’s instructions. No. 3

One thousand

1,000.00 3,000.00

Total (RM) 27,119.45

10

Bill No. 8Metal WORKS

ItemNo.


RM (letters)

Unit RateRM

(Numbers)

TotalAmount

RM

8/1

Supply and install steel door 2.20x0.9m (type SD1). The price should include oil painting two coats, primer coat, and

Walley switch type lock, hinges and iron monger all according to drawings, specifications and instructions by

the Engineer.

No. 1

Two Thousand

2,000.00 2,000.00

8/2

Supply and install steel door 2.20x1.0m (type SD2). The price should include oil painting two coats, primer coat, and

Walley switch type lock, hinges and iron monger all according to drawings, specifications and instructions by

The Engineer.

No. 1

Four Thousand

4,000.00 4,000.00

8/3

Supply and install steel sliding gate 2.5×5.0 m to be mounted at the parking entrance .the unit rate shall include painted one primer coat and two oil coats at least, the unit

rate shall include supplying ,installing and erecting an approved complete electrical motor reducer ''DELMA ROY 6 or equivalent with electrical power capable to operate the sliding gate ,complete with control panel , remote control,

latches, and all needed electrical cables,wires ,and conduits and all needed parts, fittings and

accessories .The unit rate shall include all need workmanship ,equipment , concrete to fix the gate with the

existing walls and requirement to complete the job .The work shall be done all as per drawings, specifications

,manufacture instructions and instructions by the Engineer.

No. 1

Four Thousand

4,000.00 4,000.00

8/4

Supply and install steel sliding gate 2.5×5.0 m to be mounted at the emergency parking exit .the unit rate shall include painted one primer coat and two oil coats at least,

Walley switch type lock, hinges , iron monger andall needed parts, fittings and accessories, suspended

parbed wires .The unit rate shall include all need workmanship ,equipment, concrete to fix the gate with the existing walls and requirement to complete the job .The work shall be done all as per drawings, specifications

, manufacture instructions and instructions by the Engineer.

No. 1

One Thousand

1,000.00 1,000.00

8/5

Supply and install fence 1.5 m height including supply and fixing steel tri - angles edge (Type ST-37 total length 2.5m)

and fixing at least 1 m from the total length in concrete column, 40*40*4mm Wire Mesh 1.5m height , three rows

of 4mm Tension Wire, and Barbed wire 0.45m height, all according to drawings and engineers instructions.

MR 120

Twenty Seven

27.00 3,240.00

Total (RM) 14,240.00

11

Summary

Item Description Total (RM)

1 Excavation and Interlock works 12,820.002 Concrete Works 14,136.003 Building works 17,550.004 Plastering works 15,760.005 Finishing works 7,180.006 Electrical works 16,960.007 Plumbing works 27,119.458 Metal works 14,240.00

VAT (15%) 18,864.82TOTAL (RM) 144,630.27

Total i n numbers : 144,630.27

Total i n letters : One hundred forty four thousand six hundred thirty and twenty seven cents

Name of the contractor : Jason Lee Yaue Shen

Authorized signature :

Signature and Sealing :

Title : Taylor’s Garden Carpark & Pedestrian Bridge

Telephone : 03-9076-6856

Fax : 03-9076-6857

Mobile : 012-362-5551

car park bq

Business