capitalelectriceducation.com training catalog · classes taught: master electrician prep course, 40...

All Courses IncludeFree Lunch; Course Book10% Discount for 3 or more attendees

capitalelectriceducation.com

The Electrical Distributor of Choice

Registration on the last pageNFPA70 NEC code book avialable for

purchase for only $89.00

Training CatalogFEBRUARY 2020

2 capitalelectriceducation.com

Welcome to the FebruaryCapital Electric Training Catalog!

The Capital Electric Training Catalog is designed to be an informative tool in bringing customers the most up-to-date information on what Capital Electric is offering on industry knowledge. Updated monthly, the catalog features listings of the scheduled courses and seminars that are currently being offered.

Scheduled Training – Keep a look-out at the counters and in your e-mail, or ask your salesperson for education opportunities Capital Electric offers to our customers. If you see a course or seminar that you are interested in but cannot attend because the date is not good for you, relax! We offer all Scheduled Training classes as On-Site Private Training as well! Remember, dates and locations are subject to change based on registration, etc. Please check capitalelectriceducation.com for the most up-to-date information.

On-Site Private Training – Would you like us to come to you? If you would like a private session for your company to be held at your location, Capital Electric will provide exclusive access to any course we offer. Or if you would like, you can take advantage of our state-of-the-art training facility that seats up to 60 people and have your exclusive training session hosted by us!How to Register 1. Visit capitalelectriceducation.com where you can register for

courses or schedule on-site training.2. Contact Amanda Sockriter at (301) 909-6511 or

[email protected]

ABOUT USCapital Electric is The Electrical Distributor of Choice in the Mid-Atlantic region and a proud member of the Sonepar family. Capital Electric delivers excellence in service, products from the finest lighting and electrical manufacturers, extensive application expertise, and customized, comprehensive solutions to our customers. Staying true to Sonepar’s model of “Local Brands, Local Leaders, Local Execution,” we operate under the Capital Electric name. Altogether, we serve customers in the District of Columbia, Maryland, Virginia, Delaware, Pennsylvania, West Virginia, North Carolina, South Carolina, and Georgia from over 70 locations and from our central distribution center and company headquarters in Upper Marlboro, MD.

MISSION STATEMENTOur mission is to be the Electrical Distributor of Choice for our customers, our employees, and our suppliers.

We will achieve our mission by being: accountable, respectful, ethical, profitable, innovative and professional.

3Capital Electric will not be held liable for typos or misprints. Capital Electric reserves the right to cancel or postpone these events at any time at its sole discretion.

Use our website 24 hours a day, 7 days a week.Visit us at capitalelectriceducation.com!

Table of contents

TRAININGABOUT OUR INSTRUCTORS ........................................................................................................................................ 4

TESTIMONIALS ............................................................................................................................................................... 5

LIGHTING SUMMIT ......................................................................................................................................................... 6

SAFETY CLASSES

Arc Flash & Electrical Safety NFPA 70E (Multiple Locations in MD, VA, & NC) .................................................. 7

PREP CLASSES

40 Hour Journeyman’s Prep Course (Upper Marlboro, MD) .................................................................................. 8Master Prep (Upper Marlboro, MD) .............................................................................................................................. 9Fundamentals of Electrical Work (Upper Marlboro, MD) ........................................................................................10

NEC CODE CLASSES

2020 NEC Analysis of Changes (Multiple Locations in MD, VA & PA)* ................................................................11Transformer Installation Course (Multiple Locations in MD & VA)* ......................................................................12Grounding and Bonding Seminar (Multiple Locations in MD, VA & PA)* ............................................................13The NEC Today (Multiple Locations in NC)* ..............................................................................................................14Grounding and Bonding (Multiple Locations in NC)* ..............................................................................................15Residential Wiring Course (Durham, NC)* .................................................................................................................16Installation and Inspection of Services Course (Durham, NC)*. ............................................................................ 17Transformer Installation Course (Durham, NC)*. ......................................................................................................18

SAFETY FEATURE

Generator Safety .............................................................................................................................................................19

REGISTRATION FORM .................................................................................................................................................23

*Continuing Education Credits Available


About Our InstructorsDon A. Hursey retired as Durham City/County Senior Electrical Inspector after 33 years of service. He is a licensed electrical contractor for North Carolina. He received the “Instructor of the Year” Award in 2004 from the NC Board of Examiners of Electrical Contractors, and in 2008 he received the North Carolina “Electrical Inspector of the Year” Award from the NC Chapter of the IAEI. Mr. Hursey is a member of the North Carolina Ellis Cannady Chapter of IAEI Education Committee and NFPA 72 Committee. He is also the North Carolina State Fair Electrical Apprenticeship Contest Judge. Mr. Hursey is also an instructor for NFPA, UL, and the Southeastern OSHA Training Institute Education Center.

Classes Taught: Transformer Installation Course, Electrical Safety Essentials, Residential Wiring Course, Installation and Inspection of Services Course, Grounding and Bonding, The NEC Today

John F. Mayan, PE, CESCP is a licensed Professional Engineer (PE) in DC, DE, MD, and VA, as well as a licensed Master Electrician in DE and MD. With nearly 40 years of experience in the industry, Mr. Mayan is a Senior Electrical Engineer with RMF Engineering in Baltimore, where he is responsible for power systems engineering projects ranging from high voltage transmission systems to low voltage distribution and utilization. Mr. Mayan is also an NFPA Certified Electrical Safety Compliance Professional (CESCP), and he holds a Bachelor of Science in Electrical Engineering from Rochester Institute of Technology.

Class Taught: Arc Flash Safety

Wayne H. Robinson is a retired Chief Electrical Inspector and former supervisor for the Electrical Engineering Department in Prince George’s County, Maryland. He holds multiple International Code Council Certifications for Electrical Inspections and Plan review. Wayne is a Master Electrician in Maryland and the District of Columbia, and has instructed numerous NEC Code courses over the past 30+ years at local community colleges, trade organizations and local governments.

He holds multiple US patents on grounding devices and has published books on Electrical Calculations, Illustrated Guide for Electricians and Inspectors, Grounding, Motor Calculations and Swimming Pool Bonding. Wayne is a current member of National Fire Protection Association (NFPA), International Association of Electrical Inspectors (IAEI) and the Maryland Uniformed Electrical Licensing and Examination Committee (MUELEC).

Classes Taught: Master Electrician Prep Course, 40 Hour Journeyman’s Prep Course, Fundamentals of Electrical Work, Transformer Installation Course, Grounding and Bonding Seminar, NEC Analysis of Changes

Michael V. Robinson is a licensed Master Electrician in Maryland and the District of Columbia and site superintendent for a large electrical contractor in the D.C. Metropolitan Area. He is currently responsible for the code compliant installation of a 1.3 million square foot electrical renovation project and 50+ electricians. In addition, Michael teaches both Journeyman Prep and Master Prep classes at Capital Electric.

Beginning in the trade in 1999, Michael is a 2011 graduate and salutatorian of the Local 26 IBEW Apprenticeship. He also has a B.A. from the University of Maryland at College Park. Michael resides in Prince Frederick, Maryland, is married to wife, Kristin and has two young sons, Brooks and Wade.

Classes Taught: Master Electrician Prep Course, 40 Hour Journeyman’s Prep Course, Fundamentals of Electrical Work, Transformer Installation Course

Robert A. “Bob” Preston, LC, IES is an Energy & Lighting Specialist with the Energy Solutions Group for Capital Electric. Bob is Lighting Certified by the National Council on Qualifications for the Lighting Professions (NCQLP) and is a member of the Illuminating Engineering Society of North America (IES). He has been with Capital Electric for 30 years in a variety of roles including electronics and test & measurement and has been specializing in lighting since 2006.

Bob supports energy efficient lighting activities throughout Capital Electric. He also coordinates utility incentive programs for the sales team and their customers, with particular focus on western MD and Pennsylvania. Over the last ten years, Bob has spearheaded educational lighting seminars across all of Capital Electric’s market area. Hundreds of customers and employees have attended these award-winning events which have focused on the latest advancements in energy efficient lighting technology. Bob specializes in the more technical aspects of lighting applications, particularly in the rapidly developing LED marketplace.

Class Taught: Lighting Technology Update Seminars

William “Bill” O’Connell, LC, LEED AP is a Regional Specification Sales Manager for Eaton’s Lighting Division, formerly known as Cooper Lighting. In addition to responsibility for sales of specification lighting products, Bill also serves as a technical resource for Eaton’s rep agencies, as well as lighting designers, engineering firms, specifiers, and end users, educating them on new lighting products and technologies.

Bill has more than 20 years of experience in the lighting industry. He earned a Bachelor of Science degree in Applied Optics from the Rose-Hulman Institute of Technology along with a minor in Computer Science and a German Technical Translators Certificate. Bill began his career with OSRAM SYLVANIA in 1994 as an Optical Engineer designing optical systems for car headlamps, tail lamps and turn signals. After transferring to OSRAM SYLVANIA’s general lighting division, Bill was awarded two patents, one technical and one design, for the design of SYLVANIA’s SPL optical system which shapes a halogen PAR lamp’s light to provide a more even, high quality distribution across a broad area.

Class Taught: Lighting Technology Update Seminars


TESTIMONIALSWhat attendees are saying...

“Very informative, great visuals with best

knowledge of present & past code.”

D. Gwyn – Ayden, NC

Installation and Inspection of Services

with Don HurseyJohn Mayan Arc Flash &

Electrical Safety

“Interesting, learned information I did not now

was relevant to Arc Flash.” M. Langley – Sterling, VA

40 Hour Journeyman Prepwith Wayne and Michael

Robinson

“Excellent course! All the course material was covered

very well and in a manner that was easy to understand.”

M. Holmes - Washington DC

Transformer Installationwith Don Hursey

“Focused, lots of good information. Stayed on

topic and knew his stuff.” E. Kinney – Richmond, VA

Master Electrician Prep Coursewith Wayne and Michael Robinson

“The course really helps you understand the calculations.”

A. GuIllen – Arlington, VA

Grounding & Bonding with Don Hursey

“Don Hursey provides an unparallelled level of

expertise and knowledge to his students.”

J. Holder – Durham, NC


Ten years into the LED revolution and it’s not slowing down. We’ll examine the current state of the technology in 2020, and put special emphasis on Lighting Controls. Installation of controls enhances energy savings, improves performance, expands the capabilities of LED lighting, and creates opportunities for using lighting in ways not previously possible. In addition to covering the latest LED technology, we’ll dig into lighting controls starting with the basics and up to more advanced controls applications. A not-to-be-missed event!

VENDORS*

2020 LIGHTING SUMMITLighting Controls and LED

For More Information, Visit or Call: CAPITALELECTRICEDUCATION.COM | 301.909.6511

Sylvania | Cooper Lighting | Lithonia/Acuity | LutronRAB | Signify/Philips | Progress | WattStopper

TUES 4.21 VIRGINIA BEACH, VA

WEDS 4.22 RICHMOND, VA

THUR 4.23 CHARLOTTESVILLE, VA

TUES 4.28 BALTIMORE, MD

WEDS 4.29 UPPER MARLBORO, MD

THUR 4.30 FAIRFAX, VA

WEDS 5.13 CHARLESTON, SC

THUR 5.14 COLUMBIA, SC

THUR 5.28 DURHAM, NC

TUES 6.09 YORK, PA

WEDS 6.10 HAGERSTOWN, MD

9AM – 3PM | $99

*Participating vendors may vary by location


This one day course meets the mandate of training as prescribed in

the NFPA 70E, 2018 Edition, Chapter 1, Article 110.2.

COST: $299/PERSON

Arc Flash & Electrical Safety NFPA 70E 2018

TIME: 9:00 AM - 3:00 PM

Participants will receive a copy of the 2018 Edition of the NFPA 70E Standard for Electrical Safety in the Workplace - a $76.00 value!

THIS COURSE QUALIFIES

FOR 5 HOURS TOWARDS CEUs IN

MARYLAND!

To register, see the last page of this catalog or visit


Taught by John F. Mayan

FEBRUARY 19, 2020Richmond, VA

MARCH 4, 2020Falls Church, VA

APRIL 8, 2020Upper Marlboro, MD

MAY 6, 2020Durham, NC

AGENDAUpon completion of this course, you will be able to:

• Understand Arc Flash, The Causes And Effects

• Learn What Enforcement Standards Apply

• Understand How to Safely Interact With Electrical Equipment

• Learn What is Involved in the Arc Flash Analysis

• Learn How to Bring a Facility Into Compliance With NFPA 70E

• Investigate Ways to Reduce Arc Flash Hazards

• Become Qualified in the Determination of Arc Flash and

Electric Shock Hazards by Demonstrating Proficiency

• See How Power Systems Analysis Is Used To Develop The

Arc Flash Label


ATTENTION ELECTRICIANS!…if you answered YES to these questions, then this class is for YOU!

Sponsored by

Capital Electric Upper Marlboro Training Room

February 4 - March 19, 2020Tuesdays and Thursdays4:30 - 7:30 PM

$549 ea. with a $50 discount if registered & paid prior to Jan 21st. (10% discount for 3 or more employees from the same company) Included with registration: The Illustrated Guide for Electricians and Inspectors (based on the 2017 NEC).

This course is taught by Master Electricians and industry experts Wayne Robinson and Michael Robinson and is based on the 2017 National Electrical Code (NEC)

Want to grow

your career?Preparing

for the Journeyman’s

exam?

Have 4 years working in the electrical trade?

To register, see the last page of this catalog or visit capitalelectriceducation.com


Capital Electric Upper Marlboro Training Room

Tuesdays and Thursdays • 4:30 - 7:30 PMMarch 31 -May 21, 2020

Sponsored by

WHO SHOULD TAKE THIS COURSE?• Anyone interested in becoming

a licensed master electrician or electrical contractor

• Have at least 6 years experience in the electrical trade

• Planning to take the master electrician licensing exam within the next few months

COURSE TOPICS• Branch circuits• Feeder and service

calculations• Voltage drop calculations • Commercial calculations• Appliance calculations

ATTENTION JOURNEYMEN: GET PREPPED! Save $60 if

registered and paid before March 17!

$659 ea.

See back for registration or visit capitalelectriceducation.com

Based on the 2017 National Electric Code

Taught by Master Electrician Wayne Robinson


This course is taught by Master Electricians and industry experts Wayne Robinson and Michael Robinson and is

based on the 2017 National Electrical Code (NEC)

NEW TO THE ELECTRICAL TRADE?

INTERESTED IN A CAREER AS AN

ELECTRICIAN?Ideal for anyone with 0-4 years of experience in the electrical

construction field, this five-week introductory training module will cover the basic concepts that all electrical workers need to know.

• Intro to Electrician’s Math

• Intro to Ohm’s Law• Branch Circuits Basics• Switching and

Receptacles• Grounding and

Bonding Basics• Overcurrent Protection

Basics

• Single Phase systems • Introduction to

Electrical Safety• Plans and Symbols• NEC Definitions• Wiring Methods• Conductor Properties• ...and much more!

TOPICS INCLUDE:

Mondays and WednesdaysSeptember 14 - October 14, 2020

4:30 - 7:30 PM Capital Electric Upper Marlboro

Training Room

Sponsored by

AnyAnyExperienceExperience

LevelLevelWelcome!Welcome!


Fundamentals of Electrical WorkFundamentals of Electrical WorkIntroduction to Basic Electrical Construction ConceptsIntroduction to Basic Electrical Construction Concepts

• Early Bird Pricing (before Sept. 1, 2020): $399.00 (must register and pay by Sept. 1)

• Volume Discount = 10% off (3 or more in attendance from the same company)

• Standard Price (after Sept. 1, 2020): $449.00 (any registrations/payments after Sept. 1)


Get up-to-date on the most essential changes in the NEW 2020 NEC, taught by retired

Chief Electrical Inspector and industry expert, Wayne H.

Robinson!

THIS COURSE QUALIFIES FOR 10 HOURS TOWARD CEU CREDIT!

This updated course is based on the latest 2020 edition of the National Electrical Code (NEC). This course qualifies for 10

Credit Hours toward continuing education requirements in the state of Delaware, the state of Maryland, and the following MD counties: Cecil, Harford, Prince George’s, Queen Anne, and Wicomico. NOTE: The state of Virginia has NOT approved

2020 NEC courses for continuing education.

2020 NEC Analysis of Changes

National Electrical Code Seminar

This is a 2 Day Seminar • $349 per person8:00 AM - 2:30 PM each day

Space is limited! To register, see the last page of this catalog or visit capitalelectriceducation.com

FEBRUARY 20 & 21, 2020THURSDAY & FRIDAYFalls Church, VA

FEBRUARY 6 & 7, 2020THURSDAY & FRIDAYBaltimore, MD

MARCH 19 & 20, 2020THURSDAY & FRIDAY Chesapeake, VA

APRIL 16 & 17, 2020THURSDAY & FRIDAY Cumberland, MD

APRIL 23 & 24, 2020THURSDAY & FRIDAY York, PA


TRANSFORMER INSTALLATION COURSEThis course is taught by Master Electricians and industry experts Wayne Robinson and Michael Robinson and is based on the 2017 National Electrical Code (NEC)

FEBRUARY 13 & 14, 2020Hagerstown, MD

APRIL 20 & 21, 2020Falls Church, VA

MAY 14 & 15, 2020Cumberland, MD

JUNE 11 & 12, 2020Chesapeake, VA


$329 ea.

Sponsored by

This is a Two day Seminar!8:00 am - 2:30 pm each day unless otherwise noted.

This course qualifies for 10 Hours of CEU Credit!This course, based on the 2017 National Electrical Code (NEC), qualifies for up to 10 contact hours toward electrical continuing education credits (CEUs) in the following jurisdictions: State of

Delaware, State of Virginia (3 hrs), State of Maryland, and the following MD counties: Cecil (5 hrs), Harford,

Prince George’s, Queen Anne’s, and Wicomico.

Featuring a HANDS-ON demonstration of

wiring a transformer!

ThIS Course IS:• A comprehensive, yet easy-to-

understand, walkthrough of the electrical code as it applies to transformers

• A step-by-step explanation of how to properly install a transformer according to code

• The opportunity to learn from the experience and on-the-job lessons and challenges of other experienced electricians

• Access to an actual transformer showing how to terminate primary and secondary conductors and appropriate grounding requirements

• AND MORE!


Grounding & BondingWhat You’ll Learn:Grounding and Bonding covers the essential information needed by all workers who face electrical hazards. You’ll better understand the general requirements for grounding and bonding electrical installations, including:

• Understand Grounding and Bonding as outlined in NEC Article 250

• Essential differences, requirements, and exceptions to Grounding and Bonding procedures

• Definition of key terms, such as: bonded, grounded, equipment bonding jumper, main bonding jumper, system bonding jumper, grounded conductor, equipment grounding conductor and more

• Systems, circuits, and equipment required, permitted or not permitted to be grounded

• Types and sizes of grounding and bonding conductors and electrodes

• And much more!

How You’ll Benefit:• Gain a thorough understanding of grounding and bonding procedures and avoid

making simple mistakes on the job.

• Confidently assess grounding and bonding requirements of a job without getting tripped up over technical terms.

• Perform service installations quickly without compromising efficiency.

• Connect with an expert you can call if you’re in a situation where you need advice.

• Navigate potential violations and avoid the risk of failing an inspection (and losing time and money to correct it).

Who Should Attend?• Supervisors & Safety Managers

• Maintenance Personnel

• Engineers

• Electricians• Qualified Workers

2-Day Seminar! Thursday & Friday 8:00am–2:30pm

$349June 4 & 5, 2020 Falls Church, VA

June 18 & 19, 2020 Baltimore, MD

Aug. 6 & 7, 2020 Hagerstown, MD

Nov. 19 & 20, 2020 Eastern Shore, MD

Dec. 10 & 11, 2020 York, PA

10 Hours of CEU Credit This course, based on the National Electrical Code (NEC), qualifies for up to 10 contact hours toward electrical continuing education credits (CEUs) in the following jurisdictions: State of Delaware, State of Virginia (3 hrs), State of Maryland, and the following MD counties: Cecil (5 hrs), Harford, Prince George’s, Queen Anne’s, and Wicomico.

Sponsored by



Master the Basic Concepts You Need to Excel as an Electrician with...

Capital Electric is not affiliated with the state of North Carolina or the NC Board of Examiners of Electrical Contractors. This course, when offered during fiscal year 2019, meets the requirements of the North Carolina State Board of Examiners of Electrical Contractors for 8 contact hours toward continuing education credit. This course is not sponsored by the Board.

WEDNESDAY, FEBRUARY 5, 2020Durham, NC

This course is approved for 8 hours toward continuing education in North Carolina by the NC State Board of Examiners of Electrical Contractors (NCBEEC)

8HOURS

THE NEC TODAY

An 8-hour seminar based on the 2017 National Electrical Code with

Instructor Don A. Hursey

Course Objectives:This course assists electrical apprentices, journeymen, contractors, engineers, inspectors, and maintenance personnel in understanding the changes of the 2017 National Electrical Code. 8 contact hours.

Course Materials:IAEI Analysis of Changes PowerPoint Presentation, Chapters 1-4. Based on the 2017 National Electrical Code (NEC).

Course Outline:This course will cover the 2017 edition of the National Electrical Code. The Instructor will review multiple NEC topics.

Articles covered include:110, 210, 230, 240, 250, and 300

Cost: $229

REGISTER TODAY!

To register, see the last page of this catalog or visit


Sponsored by

FEB05

TUESDAY, JUNE 9, 2020Greensboro, NC

JUN09

8:00 AM - 5:00 PM


8hours

This course is approved for 8 hours of continuing education in North Carolina by the NC State Board of Examiners of Electrical Contractors (NCBEEC)

2017 NEC Requirements for Grounding and Bonding is a one-day course designed to help you break down the dense topic of grounding and bonding according to the NEC Article 250 requirements and enable you to perform servicing and installations accurately and effectively.

8:00 AM - 5:00 PM

To register, see the back of this catalog or visit: capitalelectriceducation.com

Tuesday, April 28, 2020Charlotte, NC

Tuesday, March 17, 2020Durham, NC

Cost: $229 ea.

What you’ll Learn• Essential differences, requirements,

and exceptions to Grounding and Bonding procedures

• Systems, circuits, and equipment required, permitted or not permitted to be grounded

• Building or structures supplied by feeders or branch circuits

• And much more!

Grounding and Bondingwith Don Hursey

Discover the quickest and easiest way to get up-to-date on everything you need to know about grounding and bonding.

Sponsored by



NECReferences

Covered

• Definitions• Use and Identification of

Grounded Conductors• Branch Circuits• Grounding and Bonding• General Requirements for

Wiring Methods and Materials• Conductors for General Wiring• Cabinets, Cutout Boxes, and

Meter Socket Enclosures• Nonmetallic-Sheathed Cable:

Types NM, NMC, and NMS• Switches• Receptacles, Cord Connectors,

and Attachment Plugs (Caps)• Swimming Pools, Fountains,

and Similar Installations

This Course...

Covers the NEC requirements for wiring a dwelling and includes specific 2017 NEC changes that are related to residential wiring.

Is approved for 4 hours of continuing education in North Carolina by the NC State Board of Examiners of Electrical Contractors (NCBEEC).

with Don Hursey

WednesdayMarch 18

2020Durham,NC8am -12pm$75 ea.



NECReferences

Covered








This Course...



with Don Hursey

WednesdayMarch 18



NECReferences

Covered








This Course...



with Don Hursey

WednesdayMarch 18



Wednesday, March 18th, 20201pm - 5pm • $75 ea.Durham, NC

This course covers the NEC requirements for an electrical service and it includes specific guidelines on how to achieve a code compliant installation.

NEC References Covered:• Definitions• Requirements for

Electrical Installations• Services

• Overcurrent Protection• Service-Entrance Cable: Types SE and USE• Switchboards, Switchgear, and Panelboards

Installation and Inspection of Services Course This course is approved for 4 hours of

continuing education in North Carolina by the NC State Board of Examiners of Electrical Contractors (NCBEEC).

This course is taught by instructor Don Hursey and is based on the 2017 National Electrical Code (NEC)




Transformer Installation CourseThis course is taught by instructor Don Hursey and is based on the 2017 National Electrical Code (NEC)

TUESDAY, MAY 12, 2020

COST: $199/PERSON

YOU’LL RECEIVE:A comprehensive, yet easy-to-understand, walkthrough of the electrical code as it applies to transformers

A step-by-step explanation of how to properly install a transformer according to code

The opportunity to learn from the experience and on-the-job lessons and challenges of other experienced electricians who are participating in the training

Durham, NC

8:00 AM - 5:00 PM


No other course delivers such a detailed explanation of code-compliant transformer installation – or gives you a close look at an actual, properly installed transformer.


NFPA Public Education Division • 1 Batterymarch Park, Quincy, MA 02169Your Source for SAFETY Information

www.nfpa.org/education

Generator Generator

Just Remember...

Downed utility lines, power company blackouts, heavy snow falls or summer storms can all lead to power outages. Many people turn toa portable generator for a temporary solution without knowingthe risks.

FACT• CO deaths associated with

generators have spiked in recent years as generator sales have risen.

!

SafetySafety

When plugging in appliances, make sure they are plugged directly into the generator or a heavy duty outdoor-rated extension cord. The cords should be checked for cuts, tears and that the plug has all three prongs, especially a grounding pin.

If you must connect the generator to the house wiring to power appliances, have a qualified electrician install a properly rated transfer switch in accordance with the National Electrical Code® (NEC) and all applicable state and local electrical codes.

KKK Store fuel for the generator in a container that is intended for the purpose and is correctly labeled as such. Store the containers outside of

living areas.

KKK Generators should be used in well ventilated locations outside away from all doors, windows and vent openings.

KKK Never use a generator in an attached garage, even with the door open.

KKK Place generators so that exhaust fumes can’t enter the home through windows, doors or other openings in the building.

KKK Make sure to install carbon monoxide (CO) alarms in your home. Follow manufacturer’s instructions for correct placement and mounting height.

KKK Turn off generators and let them cool down before refueling. Never refuel a generator while it is hot.

NFPA Public Education Division • 1 Batterymarch Park, Quincy, MA 02169Your Source for SAFETY Information

www.nfpa.org/education

Generator Generator

Just Remember...

Downed utility lines, power company blackouts, heavy snow falls or summer storms can all lead to power outages. Many people turn toa portable generator for a temporary solution without knowingthe risks.

FACT• CO deaths associated with

generators have spiked in recent years as generator sales have risen.

!

SafetySafety

When plugging in appliances, make sure they are plugged directly into the generator or a heavy duty outdoor-rated extension cord. The cords should be checked for cuts, tears and that the plug has all three prongs, especially a grounding pin.

If you must connect the generator to the house wiring to power appliances, have a qualified electrician install a properly rated transfer switch in accordance with the National Electrical Code® (NEC) and all applicable state and local electrical codes.

KKK Store fuel for the generator in a container that is intended for the purpose and is correctly labeled as such. Store the containers outside of

living areas.

KKK Generators should be used in well ventilated locations outside away from all doors, windows and vent openings.

KKK Never use a generator in an attached garage, even with the door open.

KKK Place generators so that exhaust fumes can’t enter the home through windows, doors or other openings in the building.

KKK Make sure to install carbon monoxide (CO) alarms in your home. Follow manufacturer’s instructions for correct placement and mounting height.

KKK Turn off generators and let them cool down before refueling. Never refuel a generator while it is hot.


Headquarters: 8511 Pepco Place, Upper Marlboro, MD 20772800-527-1051

About On-Site TrainingOn-site classes require a 10-person minimum in order to run and are subject to instructor availability. Prices may vary based on location and other factors. For more information on what we can do for your career advancement and knowledge, email [email protected] or call us at 301-909-6511.

Customers now have the ability to

schedule group training sessions to be held at

your convenience. Put on a class for your associates,

or get together with co-workers and friends in the industry

to take advantage of an opportunity to

advance your career!

Advance your Organization with

On-Site Seminars

through Capital Electric!


A 220,000 Square Foot State-of-the-Art Distribution Center featuring the latest in warehouse technology, receiving and shipment capabilities, accurate on-time order delivery

Millions of dollars in current inventories

Thousands of items in stock every day

Outstanding fill rate accuracy and service levels

Representing hundreds of manufacturers representing the electrical industry

State-of-the-Art wire paralleling facilities

Next day delivery

3,000 Square Foot Full Service counter and Will Call on site

Centralized Commercial Projects Department specializing in Power Distribution and Lighting

Outstanding training facility featuring State-of-the-Art computer and audio/visual capabilities. This facility is available for use by Capital Electric customers for their company meetings, training activities and other events at no charge to them (Subject to availability)

8511 Pepco Place | Upper Marlboro, MD 20772Phone: 301-909-6500 Fax: 301-735-8140

Corporate Office Hours: Monday – Friday 8:00 AM – 5:00 PM

Central DistributionCenter Fact Sheet

Conveniently located less than ½ mile from the Capital Beltway(Interstate 495) and Pennsylvania Ave (Route 4) interchange

capitalelectricsupply.com


18

70

70

80

80 80

81

95

64

81

81

85

68

70

83

95

64

68

77

79

79

15 916

26

40

40

40

77

77

85

85

95

95

56

59

54

E2

55

16

20

575

75

75

85

75

64

52

20

20

26

85

26

385

77

95

95

26

95

60

66

67

28

29 30

8

Pennsylvania1. Chambersburg2. Gettysburg3. Hanover4. Lancaster5. McConnellsburg*6. Mechanicsburg7. York

Maryland8. Annapolis9. Baltimore10. Beltsville11. Chestertown12. Columbia13. Cumberland14. Frederick15. Gaithersburg16. Glen Burnie17. Golden Ring18. Hagerstown19. Havre de Grace20. Ocean Pines21. Salisbury22. Timonium23. Upper Marlboro24. Westminster25. White Plains

Virginia26. Alexandria27. Ashland28. Blacksburg29. Charlottesville30. Charlottesville31. Chesapeake32. Colonial Heights33. Fairfax34. Fishersville35. Fredericksburg36. Goochland

Virginia Cont’d37. Harrisonburg38. Manassas39. Midlothian40. Newport News41. Norfolk42. Oyster Point43. Richmond44. Richmond45. Sterling46. Virginia Beach47. Virginia Beach48. Williamsburg49. Winchester50. Woodbridge

West Virginia51. Martinsburg

North Carolina52. Charlotte53. Durham54. Fayetteville55. Gastonia56. Greensboro57. Hickory58. Mooresville59. Raleigh

South Carolina60. Anderson61. Bluffton (Hilton Head)62. Charleston63. Columbia64. Moncks Corner65. Myrtle Beach

Georgia66. Augusta67. Savannah

Capital ElectricCounter Locations

9

10

1112

13

1417

2418 19

2021

22

23

25

45

53

1

2 3

4

6

5 7

62

64

65

26

27

31

32

33

34

35

4336

44

37

38

494042

41

39

46

47

48

49

50

51

VIRGINIA

MARYLAND

PENNSYLVANIA

WESTVIRGINIA

NORTHCAROLINA

SOUTHCAROLINA

GEORGIA

5758

61

North CarolinaE1. CharlotteE2. GreensboroE3. Raleigh

Ensco Counter Locations

E1

E3

63GEORGIA

*sales office only

20190719

Capital Electric (formerly CapitalTristate / Eck Supply) Location Map

capitalelectricsupply.com


Company Name _______________________________________________________________________________________________

Address _______________________________________________________________________________________________

Phone __________________________________________ Fax _________________________________________________

Attendee #1 Name _________________________________________ Email ______________________________________________




Method of Payment (Payment is required to secure your spot):

____ Check # _______________ (Payable to Capital Electric; mail to address below)

____ Credit Card (Visa, Amex, MC)

Name on Card _____________________________________________ CC# ________________________________________________

Security Code _____________________________________________ Exp Date _____________________________________________

Billing Address _____________________________________________ Signature ____________________________________________

_____________________________________________

____ OR authorize payment with your Capital Electric Commercial Account.

Capital Electric Account# _______________________ PO#______________ Signature _______________________________________

3 Easy Ways To Register:1. ONLINE at capitalelectriceducation.com2. FAX completed registration form to (301) 735-6279 3. MAIL your registration to Capital Electric,

Attn: Marketing Dept, 8511 Pepco Place, Upper Marlboro, MD 20772

ITEM QUANTITY FEE TOTAL

Please reserve the following number of seats x $TUITION SUBTOTAL

I am sending 3+ employees. Please give me the team discount. – 10% off tuition subtotal – $

NEC Code Books, softbound Please check: q 2017 q 2020 x $89 + $NFPA NEC Handbook Please check: q 2017 q 2020 x $164 + $NEC Tabs Please check: q 2017 q 2020 x $16 + $

MY TOTAL INVESTMENT $

TC-20201220

8511 Pepco Place, Upper Marlboro, MD 20772Phone Number: 301-909-6511 • Fax: 301-735-6279

Email: [email protected]

REGISTRATION FORM

Please issue payment at time of registration in order to secure spot in seminar. Cancellations or rescheduling must be received at least 7 days in advance prior to the start of the seminar/event in order to receive a full refund or credit. No-shows and/or cancellations received after this deadline will be billed and are non-refundable.

For questions regarding this seminar, please contact Amanda Sockriter at (301) 909-6511 or [email protected]

Course Title _____________________________________________________________________________________________

Session Date _____________________________________________________________________________________________

Session Location _____________________________________________________________________________________________

20190124

Capital Electric thanks our educational sponsor!

Visit us at capitalelectriceducation.com for the latest in course offerings and events!

Follow us on Social Media!

capitalelectriceducation.com training catalog · classes taught: master electrician prep course, 40...

Documents