capacitorr® hv 200 - saes getters · capacitorr® hv 200 d.vs.137.3.17 note: pumping speed data...
TRANSCRIPT
The CapaciTorr® HV 200 pump uses the innovative ZAO getter alloy (Ti‐Zr‐V‐Al) in the form of highly porous sintered disks. The pump, which has a very compact design, provides high pumping performance in the high vacuum (HV) regime (i.e. 10‐7 ‐ 10‐9 Torr range) for all getterable gases like H2, N2, H2O, CO/CO2 and O2. This is achieved operating the getter cartridge at moderate temperature (≈200 °C).Thanks to the extremely high gas sorption capacity, the pump can cope with large air leakages or sudden gas burst typical of high vacuum systems.Use of the pump in UHV range is also possible operating the getter cartridge at room temperature.
The CapaciTorr HV 200 consists of:
built‐in heater that directly connects to the flange power feedthrough
an external housing with CF63 connecting flange
a Non Evaporable Getter cartridge using the ZAO sintered disks
The getter cartridge is very durable and designed for prolonged operation. Once spent it can be easily replaced. A bakeable connector provides an easy and fast connection to the pump power supply to activate and power the NEG cartridge.
The CapaciTorr HV 200 is also available with CF 35 connecting flange.
HIGHLIGHTS
Ordering Information
Product Product description Code
CapaciTorr HV 200 pump on CF63 CAPACITORR HV 200 5H0156
CapaciTorr HV 200 pump on CF35 CAPACITORR HV 200 CF35 5H0159Power supply + output cables CAPACITORR HV 200 POWER SUPPLY 3B0455
Input cable CABLE MAINS INPUT CF35 3MT 3B0338
CapaciTorr® HV 200
oupgr
making innovation happen, together
General Features
£ High pumping speed for all active gases
£ High sorption capacity and increased lifetime
£ Costant pumping speed in HV, UHV and XHV
£ Reversible pumping of hydrogen and its isotopes
£ Operation in the presence of high magnetic fields
£ Oil free and vibration free
£ Low weight
£ Fast pumpdown after air venting and without baking
£ Capable of coping with large air leaks
£ Suitable for viton sealed systems
Applications
£ Improving ultimate vacuum in combination with ion, diffusion, cryogenic or turbomolecular pumps
£ Surface analysis systems
£ Particle accelerators, synchrotron radiation sources and related equipment
£ Process pumps for vacuum devices and deposition chambers
£ Thin films deposition systems
£ Portable vacuum instrumentation
£ Pumping, storing and releasing hydrogen isotopes
£ Impurities removal in rare gas filled devices
Dimensions in mm
ø114
195
ø123
156
CapaciTorr® HV 200
D.VS.137.3.17
Note: Pumping speed data refer to the initial values measured at pump inlet. The “Single run” capacity is intended as the recommended absorbed quantity per run allowing to perform more than 20 sorption cycles. In case of operation under lower gas loads or at RT, the pump can be reactivated 100 times or more.
© SAES Group. Printed in Italy. All rights reserved. SAES® , ZAO® and CapaciTorr® are registered trademarks of SAES Group. SAES Group reserves the right to change or modify product specifications at any timewithout notice.
The SAES Group manufacturing companies are ISO9001 certified and the Italian companies are also ISO14001 certified. Full information about our certifications for each company of the Group are available on our website at: www.saesgroup.com
SAES Groupwww.saesgroup.comneg_technology@saes‐group.com
oupgr
Number of sorption cycles >20 cycles
Heating parameters
CapaciTorr HV 200 on CF 63Activation 54 W
Operation at 200 °C 8.6 W
CapaciTorr HV 200 on CF 35Activation 54 W
Operation at 200 °C 7.5 W
Typical Pump Characteristics CapaciTorrHV 200 on CF35
CapaciTorrHV 200 on CF63
Alloy Type ZAO
Alloy Composition Zr V Ti AlGetter Mass (g) 140Getter Surface (cm2) 432
Pumping Speed (l/s)@200 °C
H2 105 210
O2 32 90
CO2 25 65
N2 30 60
Sorption Capacity (Torrll)
H2 2800
O2 Single cycle at 200 °C 200
CO2 Single cycle at 200 °C 40
N2 Single cycle at 200 °C 200
1
10
100
1000
CapaciTorr HV 200 sorption test (according to ASTM F798-97)
------ CF63 ----CF35
Sorbed Quantity (Torr ∙ l )
Pum
ping
Spe
ed (l
/s)
Activation: 550°C x 60'
Sorption pressure: 1e-6Torr
Sorption temperature: 200°C
0,0001 0,001 0,01 0,1 1 10 100 1000
H2
CO2
N2
O2
General Features
£ High pumping speed for all active gases
£ High sorption capacity and increased lifetime
£ Costant pumping speed in HV, UHV and XHV
£ Reversible pumping of hydrogen and its isotopes
£ Operation in the presence of high magnetic fields
£ Oil free and vibration free
£ Low weight
£ Fast pumpdown after air venting and without baking
£ Capable of coping with large air leaks
£ Suitable for viton sealed systems
Applications
£ Improving ultimate vacuum in combination with ion, diffusion, cryogenic or turbomolecular pumps
£ Surface analysis systems
£ Particle accelerators, synchrotron radiation sources and related equipment
£ Process pumps for vacuum devices and deposition chambers
£ Thin films deposition systems
£ Portable vacuum instrumentation
£ Pumping, storing and releasing hydrogen isotopes
£ Impurities removal in rare gas filled devices
The CapaciTorr® HV 1600 pump uses the innovative ZAO getter alloy (Ti‐Zr‐V‐Al) in the form of highly porous sintered disks. The pump, which has a very compact design, provides high pumping performance in the high vacuum (HV) regime (i.e. 10‐7 ‐ 10‐9 Torr range) for all getterable gases like H2, N2, H2O, CO/CO2 and O2. This is achieved operating the getter cartridge at moderate temperature (≈200 °C).Thanks to the extremely high gas sorption capacity, the pump can cope with large air leakages or sudden gas burst typical of high vacuum systems.Use of the pump in UHV range is also possible operating the getter cartridge at room temperature.
The CapaciTorr HV 1600 consists of:
built‐in heater that directly connects to the flange power feedthrough
an external housing with CF150 connecting flange
a Non Evaporable Getter cartridge using the ZAO sintered disks
The getter cartridge is very durable and designed for prolonged operation. Once spent it can be easily replaced. A bakeable connector provides an easy and fast connection to the pump power supply to activate and power the NEG cartridge.
* Other models, able to simultaneously drive 2, 3 or 4 pumps are also available.
**The power supply includes also the main input cable
***Longer output cables are available
HIGHLIGHTS
Ordering Information
Product Product description Code
CapaciTorr HV 1600 pump CAPACITORR HV 1600 5H0157Power supply** NEG POWER C1* 3B0501
Output cable*** Cable supply output V1.1‐5 3Mt 3B0337
CapaciTorr® HV 1600
oupgr
making innovat ion happen , together
230
257
ø 20
7
ø 203
Dimensions in mm
CapaciTorr® HV 1600
D.VS.138.3.17
Typical Pump Characteristics CapaciTorr HV 1600
Alloy Type ZAO
Alloy Composition Zr V Ti AlGetter Mass (g) 690Getter Surface (cm2) 2190
Pumping Speed (l/s)@180 °C
H2 1700
O2 800
CO2 620
N2 470
Sorption Capacity (Torrll)
H2 13800
O2 Single cycle at 180 °C 800
CO2 Single cycle at 180 °C 160
N2 Single cycle at 180 °C 800
Note: Pumping speed data refer to the initial values measured at pump inlet. The “Single run” capacity is intended as the recommended absorbed quantity per run allowing to perform more than 20 sorption cycles. In case of operation under lower gas loads or at RT, the pump can be reactivated 100 times or more.
© SAES Group. Printed in Italy. All rights reserved. SAES® , ZAO® and CapaciTorr® are registered trademarks of SAES Group. SAES Group reserves the right to change or modify product specifications at any timewithout notice.
The SAES Group manufacturing companies are ISO9001 certified and the Italian companies are also ISO14001 certified. Full information about our certifications for each company of the Group are available on our website at: www.saesgroup.com
SAES Groupwww.saesgroup.comneg_technology@saes‐group.com
oupgr
Number of sorption cycles >20 cycles
Heating parameters
CapaciTorr HV 1600Activation at 550 °C
controlled by thermocoupleOperation at 180 °C
10
100
1000
10000
0,0001 0,001 0,01 0,1 1 10 100 1000 10000
CapaciTorr HV 1600
sorption test (according to ASTM F798-97)
Sorbed Quantity (Torr ∙ l )
Pum
ping
Spe
ed (l
/s)
Activation: 550°C x 60'
Sorption pressure 1e-6Torr
Sorption temperature: 180°C
H2
CO2
N2
O2
General Features
£ High pumping speed for all active gases
£ High sorption capacity and increased lifetime
£ Costant pumping speed in HV, UHV and XHV
£ Reversible pumping of hydrogen and its isotopes
£ Operation in the presence of high magnetic fields
£ Oil free and vibration free
£ Low weight
£ Fast pumpdown after air venting and without baking
£ Capable of coping with large air leaks
£ Suitable for viton sealed systems
Applications
£ Improving ultimate vacuum in combination with ion, diffusion, cryogenic or turbomolecular pumps
£ Surface analysis systems
£ Particle accelerators, synchrotron radiation sources and related equipment
£ Process pumps for vacuum devices and deposition chambers
£ Thin films deposition systems
£ Portable vacuum instrumentation
£ Pumping, storing and releasing hydrogen isotopes
£ Impurities removal in rare gas filled devices
The CapaciTorr® HV 2100 pump uses the innovative ZAO getter alloy (Ti‐Zr‐V‐Al) in the form of highly porous sintered disks. The pump, which has a very compact design, provides high pumping performance in the high vacuum (HV) regime (i.e. 10‐7 ‐ 10‐9 Torr range) for all getterable gases like H2, N2, H2O, CO/CO2 and O2. This is achieved operating the getter cartridge at moderate temperature (≈200 °C).Thanks to the extremely high gas sorption capacity, the pump can cope with large air leakages or sudden gas burst typical of high vacuum systems.Use of the pump in UHV range is also possible operating the getter cartridge at room temperature.
The CapaciTorr HV 2100 consists of:
built‐in heater that directly connects to the flange power feedthrough
an external housing with CF200 connecting flange
a Non Evaporable Getter cartridge using the ZAO sintered disks
The getter cartridge is very durable and designed for prolonged operation. Once spent it can be easily replaced. A bakeable connector provides an easy and fast connection to the pump power supply to activate and power the NEG cartridge.
* Other models, able to simultaneously drive 2, 3 or 4 pumps are also available.
**The power supply includes also the main input cable
***Longer output cables are available
HIGHLIGHTS
Ordering Information
Product Product description Code
CapaciTorr HV 2100 pump CAPACITORR HV 2100 5H0158Power supply** NEG POWER C1* 3B0501
Output cable*** Cable supply output V1.1‐5 3Mt 3B0337
CapaciTorr® HV 2100
oupgr
making innovat ion happen, together
Dimensions in mm
ø257
ø253
,5
265
230
CapaciTorr® HV 2100
D.VS.145.2.17
Typical Pump Characteristics CapaciTorr HV 2100Alloy Type ZAO®Alloy Composition Zr V Ti AlGetter Mass (g) 1130Getter Surface (cm2) 3580
Pumping Speed (l/s)@180 °C
H2 2100
O2 1250
CO2 880
N2 625
Sorption Capacity (Torrll)
H2 22600
O2 Single run at 180 °C 1300
CO2 Single run at 180 °C 260
N2 Single run at 180 °C 1300
Note: Pumping speed data refer to the initial values measured at pump inlet. The “Single run” capacity is intended as the recommended absorbed quantity per run allowing to perform more than 20 sorption cycles. In case of operation under lower gas loads or at RT, the pump can be reactivated 100 times or more.
© SAES Group. Printed in Italy. All rights reserved. SAES® , ZAO® and CapaciTorr® are registered trademarks of SAES Group. SAES Group reserves the right to change or modify product specifications at any timewithout notice.
The SAES Group manufacturing companies are ISO9001 certified and the Italian companies are also ISO14001 certified. Full information about our certifications for each company of the Group are available on our website at: www.saesgroup.com
SAES Groupwww.saesgroup.comneg_technology@saes‐group.com
oupgr
Number of runs (sorption cycles) >20
Heating parameters
CapaciTorr HV 2100Activation at 550 °C
controlled by thermocoupleOperation at 180 °C
H2
CapaciTorr HV 2100
sorption test (according to ASTM F798-97)
Sorbed Quantity (Torr ∙ l )
Pum
ping
Spe
ed (l
/s)
Activation: 550° C x 60'
Sorption pressure 1e-6Torr
Sorption temperature: 180° C
0,0001 0,001 0,01 0,1 1 10 100 1000 1000010
100
1000
10000
CO2
N2
O2
Power Supply for CapaciTorr® HV 200The CapaciTorr HV 200 Power Supply is an electronic unit specifically designed for controlling the activation and working processes of the CapaciTorr HV 200 getter pump. The instrument receives line voltage (110 - 240 VAC, 50-60 Hz), converts to DC voltage of 16.5 VDC and supply the getter pump by way of a microprocessor-based electronic control card. The instrument is designed to control the getter pump in two different modes:
ActivationWorking
In the activation mode, the instrument supplies the power necessary to heat up the getter pump to the activation temperature (~500°C). In this operating mode, the CapaciTorr HV 200 power supply deliver 100% of the available power.In the working mode, the instrument supplies the power necessary to heat up the getter pump to the working temperature (~200°C). Working modes for CapaciTorr HV 200 on CF 63 and CF 35 flanges are available.NEG supply output cable 5 meters long is directly integrated in the power supply.
HIGHLIGHTS
oupgr
Ordering InformationProduct description CodeCapaciTorr HV 200 Power Supply 3B0455Cable mains input CF 35 3Mt 3B0338
CapaciTorr® HV 200 Power Supply
making innovation happen, together
Line Voltage£ Supply voltage: 110-240 VAC
£ Frequency: 50-60 Hz
£Mains cord connector: IEC Type 6A 250V
£ Over-voltage class: Cat II
Line Protection Required
£ Supply protection: 6 A Fuse or Circuit Breaker
£ Differential switch: 30 mA
£ Isolation type: Class I
Output
£ Output voltage VDC: (8.6- 16.5) V
£ Output power : (4.0 - 6.0) A
Instrument Protection
£ Internal line fuse: (2.0-3.5) A T
£ Overload protection: Electronic control
£ High Temp. Protection: Electronic control
Dimensions
£ 72 x 144 x 300 mm (HxWxD)
Weight
£ 2,1 kg
n n
Input:
£ Maximum power: 3.5 kW
£ Supply voltage: 110-220 VAC
£ Frequency: 50-60 Hz
£ Input current: 1 x 18.5/9 A
£ Noise at 1 mt: < 40 dBA
£Mains cord connector: IEC Type 16A 250V
Output 1-4 at 110 V
£ Output power: 700 W+overload
£ Output voltage: 0-110VDC
£ Overload: 110% for one minute
£ Supply current 10 A (at 70VDC)
Main features of NEG POWER
£ Switching power controller
£ Simultaneous activation/conditioning of up to 4 NEG pumps
£ Local control by user friendly touch screen controller
£ Remote control by RS232 interface with ASCII protocol
£ Remote control by RS485 interface with Modbus protocol (RTU)
£ Remote control by standard Ethernet interface
£ Temperature monitoring and regulation
£ Automatic power regulation for different pump configurations
£ Diagnostic features (open/short connection, broken thermocouple, broken heating filament, overheating control, etc.)
£ Unit switches into stand-by mode after a long time of non-operation
HIGHLIGHTS
oupgr
NEG POWER Multicontroller
making innovation happen, together
The SAES Group manufacturing companies are ISO9001 certified, the Asian and Italian companies are also ISO14001 certified. Full information about our certifications for each company of the Group is available on our website at: www.saesgroup.com
© SAES Group. Printed in Italy. All rights reserved. SAES® and CapaciTorr® are registered trademarks of SAES Group. SAES Group reserves the right to change or modify product specifications at any timewithout notice.
Multicontroller for NEXTorr®, CapaciTorr®, CapaciTorr® HV and SORB-AC® pumpsThe NEG POWER is an electronic unit specifically designed to control the activation process of NEXTorr, CapaciTorr, CapaciTorr HV and SORB-AC pumps with or without a thermocouple.The NEG POWER can simultaneously activate up to four different NEXTorr, CapaciTorr, CapaciTorr HV and SORB-AC pumps. It supplies
Adjustable DC voltage up to 110 VCurrent up to 10 APower up to 700 W per channelLAN, RS232 or RS485 remote control.
The unit has a user friendly touch screen display to control the pumps. It is also possible to control the NEG POWER by the SAES remote control software.The parameters of the GP SORB-AC, CapaciTorr, CapaciTorr HV and NEXTorr pump series are preset in the software, making the activation as simple as selecting the pump. The activation process can be easily customized by inputting the electrical parameters and the desired temperature. The summary table below lists the pump models whose parameters are preset in the NEG POWER software.
*It can be upgraded to NEG POWER Models controlling more pumps.** Other cables lenghts are available on request
D.VS.147.1.17
n n n n
Ordering Information
Product description Code Pump ModelsNEG POWER C1* 3B0501 All pumpsNEG POWER C2* 3B0502 All pumpsNEG POWER C3* 3B0503 All pumpsNEG POWER C4 3B0504 All pumps
Cable supply output V1.1-5 3MT** 3B0337
CapaciTorr D 2000,CapaciTorr D 3500,GP 100, GP 200, GP 500,CapaciTorr HV 1600,CapaciTorr HV 2100
Cable supply output V1.1-4 3MT** 3B0345 GP 100, GP 200, GP 500
Cable supply output with K-TC/3MT-V1.1-HT** 3B0420
CapaciTorr D 1000,NEXTorr D 300-5, NEXTorr D 500-5,NEXTorr D 1000-10,NEXTorr D 2000-10
Cable supply output V1.1-CF 35 3MT** 3B0347 CapaciTorr D 400-2
NEG POWER-NEXTorr D100/D200 OUTPUT CABLE-5MT** 3B0469
NEXTorr D 100-5,NEXTorr D 200-5,CapaciTorr D 100,CapaciTorr D 200
Cable supply output V1.1-2F 3MT** 3B0370 GP 50