2009Catalog 457013

Supercedes 457013, Dated October 2006

SKF BearingsMaster Interchange

For automotive, heavy truck, andagricultural bearings

Includes ball, cylindrical, needle,tapered, special bearings and hub assemblies

SKF is your source for a wide range of products covering various industries. From automotive to heavy duty to industrial applications, SKF offers a solution to keep your machines operating and your business profitable.

To receive updates and news from SKF, please email: vsm.updates@skf.com

SKF Group 2009All rights reservedPrinted in the U.S.A.

SKF is a registered trademark of the SKF Group.

For more information, please contact your local SKF representative at 1-800-882-0008 or visit us at www.vsm.skf.com.

SKF VSM NA890 N. State StreetSuite 200Elgin, IL 60123

The Power of Knowledge Engineering

457013

SKF Bearings M

aster Interchange

This catalog is presented in a simple to use sequence similar to a dictionary listing. The original equipment and manufacturers numbers are arranged in left-to-right Alpha/Numeric sequence. There is no need to pre-determine the Prefix/Base-Suffix to quickly locate the desired number. Letters (alpha) take priority over numbers (numeric).

Examples:

A22 AT201S 3382T Followed by: 2AH06-1 Followed by: AT21 Followed by: 33821

Other examples:

6206 R1309TKS Followed by: 6206LL Followed by: R1309WKB Followed by: 6206LLB Followed by: R1312TKGSR

Note: Interchanges listed here will provide a fast conversion of manufacturer or competitor numbers to the SKF equivalent. Please note that many interchanges are made on an application basis and may not be identical in style or type. Whenever possible refer to the SKF Passenger car & light truck catalog-Current (457205), SKF Passenger car & light truck catalog supplement (457205s dated 2009) SKF Passenger car & light truck catalog-Vintage (457206), or the SKF Agricultural applications pocket guide (457649), to assure proper seal specifications.

How to use this catalog

1

Ball bearing nomenclature .....................................................2

Cylindrical bearing nomenclature ..........................................3

Needle bearing nomenclature ...............................................4

Tapered roller bearing nomenclature ...................................5

Tapered roller bearing type illustration .................................6

Bearing numbering system ....................................................7

Hub assembly types ............................................................. 10

Manufacturer abbreviation list ............................................ 25

Interchange listings .............................................................. 27

Go to www.vsm.skf.comfor the most up to date product & promotion information.

Click on "On-line Catalog",then click on "Automotive" or "Heavy Duty"for interchange information.

Simple. Quick. Complete.

Table of contents

Can't find it here?

2

Ball bearingsNomenclature

Prefix Description Suffix Description

Prefixes

AB Alternator bearings.AC Air conditioning clutch bearing.BR Bearings.B Bearings.FW Front wheel applications.GRW Rear wheel bearings with variations in widths.GWC Generator bearing.N Bearing inner and outer ring narrower than standard.RLS Light series, inch type.RWC Rear wheel bearing, including locking ring.RWF Rear wheel bearing, including locking ring.RW Rear wheel with variation of basic design.R Extra light inch series.TBT Timing belt tensioner.W Inner and outer rings wider than standard.XLS Extra light series.

Suffix Description

Suffixes

A Special inner and outer ring corners.A Double row, Conrad type, open.ANR Double row, Conrad type, snap ring.ANRH Double row, Conrad type, snap ring, special features.AR Special inner and outer ring corners, locking ring for rear wheel applications.AZ Double row, Conrad type, one shield.A2Z Double row, Conrad type, two shields.B Internal design change or special bearing dimensions.BEP 40 angular contact, hi cap, polyamide cage.BR Special dimension, locking ring for rear wheel applications.BY Single row angular contact ball bearing.C Two-piece wiping seal on one side.CDR Two-piece wiping seal on both sides of bearing, locking ring included.CCRA Two-piece wiping seal on both sides of bearing, locking ring with special dimensions.CR Locking ring.E Double row, maximum capacity, open.ER Locking ring.ENR Double row, maximum capacity, snap ring.EZ Double row, maximum capacity, one shield.E2Z Double row, maximum capacity, two shields.EZNR Double row, maximum capacity, snap ring, one shield. FR Locking ring.GR Locking ring.

Suffixes-cont.

H Double row ball bearing, Conrad type.J Stamped unhardened steel cage.M Non-significantwhenusedwithpillowblocks.NBRJ Snapringonoppositesideoffillingslot.NJ Snap ring groove on O.D. of bearing, stamped steel cage, snap ring not included. NJX Snap ring groove, stamped steel cage, special dimensions, snap ring not included.NRJ Snap ring groove, snap ring, stamped steel cage.NRJ1 Snap ring, stamped steel cage, special O.D. and I.D.NRJX Snap ring, steel cage, special features.R Locking ring.RA Locking ring with special dimensions.RB Locking ring with special dimensions.RSJ Sealed one side, steel cage.2RSJ Sealed both sides, steel cage.2RSNR Sealed both sides, snap ring.2RS2 Two Viton seals, C3 clearance, mineral base grease.2RS2S Two Viton seals, C3 clearance, synthetic grease.S Shieldonoppositesideoffillingslot.VAL Modificationoforiginaldesign,sealedbothsides.VAW Special features.VSP Various special designs.W Double row, maximum capacity type.WA Double row, maximum capacity, with special inner and outer ring corners.WCC Double row bearing with vertex of contact angles inside the bearing, maximum capacity. Two-piece wiping seal on both sides.WNR Maximum capacity, snap ring.WNRX Maximum capacity, snap ring, special dimensions.YYR Single lip molded seal on both sides. Locking ring supplies with rear wheel types.ZBJ Shield opposite standard side, steel cage.ZJ Shield on one side, steel cage.ZNBRJ Shield on one side, snap ring on same side as shield, steel cage.ZNBRJX Shield on one side, snap ring on same side as shield, steel cage, special dimensions.ZNJ Shield on one side, snap ring groove opposite shield, steel cage. Snap ring not included.ZNRJ Shield on one side, snap ring opposite shield, steel cage.ZNRJ2 Shield on one side, snap ring opposite shield, special inner and outer ring corners.ZNRJX Shield on one side, snap ring opposite shield, special dimensions.2ZJ Shields on both sides, steel cage.2ZJ1 Two-piece wiping seal on both sides of bearing. Special 5/8" inner dimension.2ZNRJ Shield on both sides of bearing, snap ring, steel cage.1J I.D. 1mm larger than standard I.D.

Cylindrical roller bearingsNomenclature

3

Prefix Description Suffix Description

Suffixes-cont.JB Bronze cage. Special features.L Riveted steel retainer. Flange guided.R Locking ring.REAB Snap ring groove in outer ring O.D., snap ring included. Double rib outer ring. Oversized O.D. for heavypressfit.Moldedpolymericretainer.REAX Snap ring groove in outer ring O.D., snap ring included. Double rib outer ring. Oversized O.D. for heavypressfit.Segmentedretainer.REB Snap ring groove in outer ring O.D., snap ring included. Double rib outer ring. Molded polymeric retainer.REX Snap ring groove in outer ring O.D., snap ring included. Double rib outer ring. Segmented retainer.RUGV Snap ring groove in outer ring O.D., snap ring included. Single rib outer ring. One snap ring in I.D. of outer ring. Formed steel retainer.RUM Snap ring groove in outer ring O.D., snap ring included. Single rib outer ring. One snap ring in I.D. of outer ring. Full complement.SGNV Short single rib outer ring. Snap ring groove in outer ring O.D., with outer face plate. Formed steel retainer.TAV Outer ring with two snap rings in I.D. Oversized O.D. forheavypressfit.Formedsteelretainer.TDHM Outer ring with two snap rings in I.D. Special features. Blind hole in O.D. Full complement.TDM Outer ring with two snap rings in I.D. Special features. Full complement.TM Outer ring with two snap rings in I.D. Full complement.TM1 Outer ring with two snap rings in I.D. Full complement. Inner ring I.D. radius .080".TM2 Outer ring with two snap rings in I.D. Full complement I.D. .1969" undersized. Inner ring radius .250".TM12 Outer ring with two snap rings in I.D. Full complement. Inner ring I.D. radius .156".TM17 Outer ring with two snap rings in I.D. Full complement. Outer ring width .0787" oversized. Inner ring radius .060".TM19 Outer ring with two snap rings in I.D. Full complement. Inner ring radius .187".TV Outer ring with two snap rings in I.D. Formed steel retainer.UBM Single rib outer ring. One snap ring in I.D. of outer ring. Molded polymeric retainer. Full complement.UM Single rib outer ring. One snap ring in I.D. of outer ring. Full complement.UM18 Single rib outer ring. One snap ring in I.D. of outer ring. Full complement. Inner and outer ring .0410" wider than standard inner ring. Rib dia. .040" oversized. Inner ring I.D. .1087" oversized.UM23 Single rib outer ring. One snap ring in I.D. of outer ring. Full complement. Outer ring width .0787" oversized.UM26 Single rib outer ring. One snap ring in I.D. of outer ring. Full complement. Inner ring radius .100".UV Single rib outer ring. One snap ring in I.D. of outer ring. Formed steel retainer.V Formed steel retainer.W Non-standard.X Segmented retainer.

PrefixesBR Bearings.C Special features.DB Drawn cup.GRW Rear wheel bearing.M Metric series.MA Plain cylin