7/29/2019 Call 14 Topics

1/1

Provisional CALL 14 TOPICS

SP1-JTI-CS-2013-01

tentative publication date: 15 January 2013

Identification ITD - AREA - TOPIC topics VALUE () MAX FUND ()

JTI-CS-ECO Clean Sky - EcoDesign 6 1,300,000 975,000JTI-CS-ECO-01 Area-01 - EDA (Eco-Design for Airframe) 1,300,000

JTI-CS-2013-1-ECO-01-065 Manufacturing optimisation of a plenum with GFRP cyanate ester-based prepreg 150,000

JTI-CS-2013-1-ECO-01-066 Manufacturing by DMLS and machining of a titanium fan wheel. Comparison with casting process 200,000

JTI-CS-2013-1-ECO-01-067 Manufactur ing of h igh temperature compos ite par ts for a ir cooling unit (e .g. cyanate es ter / carbon fibers) by filament winding 200,000

JTI-CS-2013-1-ECO-01-068 Manufacturing and optimisation of a PEEK scroll for a Motorized Turbo Compressor (MTC) in an E-ECS 250,000

JTI-CS-2013-1-ECO-01-069 Characterization of metallurgical joining technologies for Mg Al and Mg Al-Li joints for the demonstrator B2 assembly 200,000

JTI-CS-2013-1-ECO-01-070 Application of sol gel technologies on low weight green metallic fuselage section 300,000

JTI-CS-ECO-02 Area-02 - EDS (Eco-Design for Systems)

JTI-CS-GRA Clean Sky - Green Regional Aircraft 4 6,420,000 4,815,000JTI-CS-GRA-01 Area-01 - Low weight configurations

JTI-CS-GRA-02 Area-02 - Low noise configurations 6,420,000

JTI-CS-2013-1-GRA-02-020 Aerodynamic experimental development and investigation on innovative Low-Noise A/C 90-pax configuration 2,400,000JTI-CS-2013-1-GRA-02-021 Optimization and highly-accurate/reliable demonstration of low-noise innovative Main Landing Gear 1,400,000

JTI-CS-2013-1-GRA-02-022 Experimental investigation of advanced load control/alleviation technology in a regional a/c 2,400,000

JTI-CS-2013-1-GRA-02-023 Development of methodology for structural& mechanical analysis on kinematics and actuators integration for loads control& alleviation devices 220,000JTI-CS-GRA-03 Area-03 - All electric aircraft

JTI-CS-GRA-04 Area-04 - Mission and trajectory Management

JTI-CS-GRA-05 Area-05 - New configurations

JTI-CS-GRC Clean Sky - Green Rotorcraft 4 2,720,000 2,040,000JTI-CS-GRC-01 Area-01 - Innovative Rotor Blades 320,000

JTI-CS-2013-1-GRC-01-014 Development and Testing of Computational Methods to Simulate Helicopter Rotors with Active Gurney Flap 320,000

JTI-CS-GRC-02 Area-02 - Reduced Drag of rotorcraft 900,000

JTI-CS-2013-1-GRC-02-016 Assessment of optimized tiltrotor engine intake performance by wind tunnel tests 450,000

JTI-CS-2013-1-GRC-02-017 Contribution to the aerodynamic design of a helicopter air intake through wind tunnel testing 450,000

JTI-CS-GRC-03 Area-03 - Integration of innovative electrical systems

JTI-CS-GRC-04 Area-04 - Installation of diesel engines on light helicopters

JTI-CS-GRC-05 Area-05 - Environmentally friendly flight paths 1,500,000

JTI-CS-2013-1-GRC-05-008 Innovative measurement and monitoring system for accurate on-board acoustic predictions during rotorcraft approaches and departures 1,500,000

JTI-CS-GRC-06 Area-06 - Eco Design for Rotorcraft

JTI-CS-SAGE Clean Sky - Sustainable and Green Engines 18 27,100,000 20,325,000JTI-CS-SAGE-01 Area-01 - Open Rotor Demo 1

JTI-CS-SAGE-02 Area-02 - Open Rotor Demo 2 7,100,000

JTI-CS-2013-1-SAGE-02-030 Open Rotor propellers Ice Protection System. 2,000,000JTI-CS-2013-1-SAGE-02-031 SAGE2 Engine In-flight Balancing System 4,000,000

JTI-CS-2013-1-SAGE-02-032 Study and durability of electrically insulative material in aircraft engine chemical environment 500,000

JTI-CS-2013-1-SAGE-02-033 High speed metallic material removal under acceptable surface integrity for rotating frame 600,000

JTI-CS-SAGE-03 Area-03 - Large 3-shaft turbofan 4,450,000

JTI-CS-2013-1-SAGE-03-021 TCC Manifold Architecture Parametric Model development 600,000

JTI-CS-2013-1-SAGE-03-022 Shared lubrication starting system 500,000

JTI-CS-2013-1-SAGE-03-023 Microstructure Based Material Mechanical Models for Superalloys 850,000

JTI-CS-2013-1-SAGE-03-024 Electric Pump for Safety Critical Aero engine applications 1,750,000

JTI-CS-2013-1-SAGE-03-025 Variable fluid metering unit for Aero engine applications 750,000

JTI-CS-SAGE-04 Area-04 - Geared Turbofan 7,400,000

JTI-CS-2013-1-SAGE-04-020 Development of a robust forging process for a new advanced aero-engine rotor material 1,000,000

JTI-CS-2013-1-SAGE-04-021 Development of an advanced forging process for optimised turbine casing material 600,000

JTI-CS-2013-1-SAGE-04-022 Development of an advanced long life Ceramic Matrix Composite (CMC) turbine component 1,000,000

JTI-CS-2013-1-SAGE-04-023 Development of a high flexible, low cost single crystal casting production process 1,500,000

JTI-CS-2013-1-SAGE-04-024 Development of a Power Gearbox Rig 3,300,000

JTI-CS-SAGE-05 Area-05 - Turboshaft

JTI-CS-SAGE-06 Area-06 - Lean Burner 8,150,000

JTI-CS-2013-01-SAGE-06-003 SAGE 6 Lean burn fuel injector coking studies 5,000,000

JTI-CS-2013-01-SAGE-06-004 Design methods for low emissions 1,300,000

JTI-CS-2013-01-SAGE-06-005 Design methods for durability and operability of low emissions combustor 850,000

JTI-CS-2013-01-SAGE-06-006 Advanced materials for lean burn combustion system components using Laser- Additive Layer Manufacturing (L-ALM) 1,000,000

JTI-CS-SFWA Clean Sky - Smart Fixed Wing Aircraft 2 3,000,000 2,250,000JTI-CS-SFWA-01 Area01 Smart Wing Technology

JTI-CS-SFWA-02 Area02 - New Configuration 3,000,000

JTI-CS-2013-1-SFWA-02-038 Design and manufacturing of a representative new generation business jet model for high and low speed tests 1,000,000

JTI-CS-2013-1-SFWA-02-041 Blade trajectory testing 2,000,000

JTI-CS-SFWA-03 Area03 Flight Demonstrators

JTI-CS-SGO Clean Sky - Systems for Green Operations 20 10,500,000 7,875,000JTI -CS-SGO-01 Area-01 - Def in it ion o f A irc ra ft Solut ions and exp lo tat ion s trateg ies

JTI-CS-SGO-02 Area-02 - Management of Aircraft Energy 6,250,000

JTI-CS-2013-1-SGO-02-051 Ram-air fan optimization for electrical ECS application 600,000

JTI-CS-2013-1-SGO-02-056 Integrated design tool to support EWIS optimisation 300,000

JTI-CS-2013-1-SGO-02-057 PWM High Voltage connectors 200,000

JTI-CS-2013-1-SGO-02-058 Optimized power cable for skin effects 200,000

JTI-CS-2013-1-SGO-02-061 Technology development and fabrication of integrated solid-state power switches 650,000

JTI-CS-2013-1-SGO-02-064 Cooperative System Design Simulation Environment for Energy System Applications 250,000

JTI-CS-2013-1-SGO-02-065 Modelica library of detailed magnetic effects in rotating machinery 250,000

JTI-CS-2013-1-SGO-02-066 HVDC fuses design, development, validation and integration 400,000

JTI-CS-2013-1-SGO-02-067 Optimized insulation for adapted characteristics 300,000

JTI-CS-2013-1-SGO-02-068 Harness integrated sensors network for wiring health monitoring 500,000

JTI-CS-2013-1-SGO-02-069 High power SiC diodes for Starter-Generator rotating rectifier bridge applications 600,000JTI-CS-2013-1-SGO-02-070 New magnetic materials for machines 600,000

JTI-CS-2013-1-SGO-02-071 Bi-phase cooling system suitable for power electronics dedicated to more electrical aircraft 800,000

JTI-CS-2013-1-SGO-02-072 Li-Ion battery for optimized DC network power conversion 600,000

JTI-CS-SGO-03 Area-03 - Management of Trajectory and Mission 2,050,000

JTI-CS-2013-1-SGO-03-021 Flight Operations for novel Continuous Descents 500,000

JTI-CS-2013-1-SGO-03-022 Validation of avionic polarimetric radar X-band meteorological models and algorithms through experimental tests 1,000,000

JTI-CS-2013-1-SGO-03-023 Simulation of Pilot Behaviour and Clearance Negatiation in Trajectory Changes Management 550,000

JTI-CS-SGO-04 Area-04 - Aircraft Demonstrators 2,200,000

JTI-CS-2013-1-SGO-04-006 Thermal Mock-ups for Thermal Management of a Ground Integration Test Rig 1,200,000

JTI-CS-2013-1-SGO-04-007 Design and manufacturing of a 10kW AC-DC converter unit 500,000

JTI-CS-2013-1-SGO-04-008 Electrical equipment modelling for test rig virtual integration 500,000

JTI-CS-TEV Clean Sky - Technology Evaluator 0 0 0.000

topics VALUE FUND

totals 54 51,040,000 38,280,000

Topic List_SP1-JTI-CS-2013-01 V8 21/12/2012